BrickLink Discussion Forum

Discussion Forum: Messages by paulvdb (7140)

Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies

Re: Inventory Change Request for Set 70351-1 - paulvdb (7140)

[...] Quantity should be 1. I have changed that.
(55 months ago, Oct 20, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 7942-1 - paulvdb (7140)

[...] Both types of hose nozzle have been found in this set. I will accept your request to add 2584c11 but the request to delete 2584c09 will be rejected.
(55 months ago, Oct 19, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 9095-1 - paulvdb (7140)

[...] The procedure to add stickered Counterparts to BrickLink and set inventories is as follows: (1) Add the stickered parts to the BrickLink catalog: (URL) Help on [...]
(55 months ago, Oct 19, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 75250-1 - paulvdb (7140)

[...] The set was inventoried by a catalog associate who would have recognized the correct variant in the set he used for this inventory. If you found 2436b in a sealed set [...]
(55 months ago, Oct 19, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 6688-1 - paulvdb (7140)

[...] This request will be rejected. Three white 1x2 bricks were included in this set for the alternate models that are shown on the box.
(55 months ago, Oct 18, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 6380-1 - paulvdb (7140)

[...] What is your source for this request? The set images show the large tree, but I just checked the set in my personal collection and mine has the small tree.
(55 months ago, Oct 18, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 70667-1 - paulvdb (7140)

[...] The instructions show the same sticker on both sides, so you don't really know which sticker should be left and which should be right. You can use Side A and Side [...]
(55 months ago, Oct 17, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 70667-1 - paulvdb (7140)

[...] I have approved all except 15068pb215. In the instructions it shows two of these with the same sticker, but if you look at the image of the stickersheet you can see that [...]
(55 months ago, Oct 16, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 7783-1 - paulvdb (7140)

[...] Instructions and box art don't always show the part variants that are actually included in the set. I check a couple of video reviews and they both showed this set [...]
(55 months ago, Oct 16, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 4867-1 - paulvdb (7140)

[...] The second hood is already there in the inventory of the Dementor minifigure.
(55 months ago, Oct 14, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 5974-1 - paulvdb (7140)

[...] These parts are included in the inventory of the droid minifigure.
(56 months ago, Oct 8, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 10194-1 - paulvdb (7140)

[...] Ok. But they should be added as alternates, not counterparts. I'll change that for you.
(56 months ago, Oct 6, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 3724-1 - paulvdb (7140)

[...] Based on that and the instructions it seems almost certain that they also came assembled in this set.
(56 months ago, Oct 6, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 10194-1 - paulvdb (7140)

[...] Were these included in your set instead of the dark bluish gray ones?
(56 months ago, Oct 6, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 10219-1 - paulvdb (7140)

[...] For alternate stud types of minifigure heads you can ask to have a note added to the minifigure inventory stating that both types of heads can be found in the minifigure. [...]
(56 months ago, Oct 6, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 3724-1 - paulvdb (7140)

[...] I checked the building steps in the instructions where they are used. They are shown as complete assemblies there. Do you know if they came assembled in the set? In that [...]
(56 months ago, Oct 5, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 1589-1 - paulvdb (7140)

[...] You are correct about the black 3176. There are indeed two shown in the instructions. And I only see four yellow 3622 in the instructions for the main model. So that [...]
(56 months ago, Oct 2, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 6032-1 - paulvdb (7140)

[...] There are already two cattle horns in this inventory. One in the regular items section and one in the inventory of the knight minifigure. The headdress is a regular item [...]
(56 months ago, Oct 2, 2019, to Inventories Requests)

Inventory Change Request for Set 6410-1 - paulvdb (7140)

Please make changes to the following inventory: (Set 6410-1) * Add 1 Part BA87pb01 White Stickered Assembly 2 x 2 x 2 with Butterfly and Two Flowers Pattern (Sticker) [...]
(56 months ago, Oct 1, 2019, to Inventories Requests)

Inventory Change Request for Set 7498-1 - paulvdb (7140)

Please make changes to the following inventory: (Set 7498-1) * Add 1 Part 3010pb103 White Brick 1 x 4 with White 'POLICE' Bold Font on Blue Background Pattern (Sticker) [...]
(56 months ago, Oct 1, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 7498-1 - paulvdb (7140)

[...] It looks like Lego used different fonts for stickers from the 2011 sets. As you can see in the image 3010pb152 has a smaller font with more empty blue space above and [...]
(56 months ago, Oct 1, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 7498-1 - paulvdb (7140)

[...] Looks like this is not the correct sticker for this set. The font on the sticker in this set is bigger than on (Part 3010pb152) Looks like the correct stickered part should [...]
(56 months ago, Sep 30, 2019, to Inventories Requests)

Inventory Change Request for Set 7286-1 - paulvdb (7140)

Please make changes to the following inventory: (Set 7286-1) * Change 4 Part White {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a [...]
(56 months ago, Sep 30, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 8425-1 - paulvdb (7140)

[...] Set was originally inventoried from instructions so we don't have evidence that 4265a was ever in this set. It can always be added again if evidence is found for [...]
(56 months ago, Sep 29, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 4549-1 - paulvdb (7140)

[...] I have just submitted 2972b to the catalog for the one hole variant so that we can get rid of the undetermined 2972 in inventories. Based on your findings it seems unlikely [...]
(56 months ago, Sep 29, 2019, to Inventories Requests)

Inventory Change Request for Set 6180-1 - paulvdb (7140)

Please make changes to the following inventory: (Set 6180-1) * Add 2 Part 4864a Yellow Panel 1 x 2 x 2 - Solid Studs (match ID 1) * Change 2 Part Black {2609 Magnet Holder [...]
(56 months ago, Sep 29, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 7823-1 - paulvdb (7140)

[...] I don't know if 4081a was ever included in this set, but if you look at the instructions you'll see that they were at least used when the set was designed because [...]
(56 months ago, Sep 28, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 7823-1 - paulvdb (7140)

[...] We can remove the 3002 and 3003 from this inventory. They can always be added as alternates if someone finds convincing evidence that they were included in this set.
(56 months ago, Sep 28, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 76049-1 - paulvdb (7140)

[...] Color should be medium blue. I changed it.
(56 months ago, Sep 25, 2019, to Inventories Requests)

Inventory Change Request for Set 6661-1 - paulvdb (7140)

Please make changes to the following inventory: (Set 6661-1) * Add 1 Part 3070b Blue Tile 1 x 1 with Groove (3070) (Extra)
(56 months ago, Sep 25, 2019, to Inventories Requests)

Inventory Change Request for Set 7034-1 - paulvdb (7140)

Please make changes to the following inventory: (Set 7034-1) * Change 1 Part {Light Bluish Gray to Light Gray} 4592c02 Lever Small Base with Black Lever (Extra) Comments [...]
(56 months ago, Sep 25, 2019, to Inventories Requests)

Inventory Change Request for Set 7034-1 - paulvdb (7140)

Please make changes to the following inventory: (Set 7034-1) * Add 1 Part 2780 Black Technic, Pin with Friction Ridges Lengthwise WITH Center Slots (Extra) * Add 1 Part [...]
(56 months ago, Sep 25, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 6987-1 - paulvdb (7140)

[...] Some further information about my set: it is the redesigned version with the plates with pins. The 2x2 bricks were 3003old. The set must originally be from Italy because [...]
(56 months ago, Sep 25, 2019, to Inventories Requests)

Inventory Change Request for Set 6987-1 - paulvdb (7140)

Please make changes to the following inventory: (Set 6987-1) * Change 1 Part Black {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud [...]
(56 months ago, Sep 25, 2019, to Inventories Requests)

Inventory Change Request for Set 6155-1 - paulvdb (7140)

Please make changes to the following inventory: (Set 6155-1) * Add 1 Gear p95aqua (Not Applicable) Aquazone Poster, Large 1995 A2 (4.100.094/4.100.095-EU) Comments [...]
(56 months ago, Sep 23, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 31098-1 - paulvdb (7140)

[...] Screenshot from the Youtube video clearly shows the smooth bar of 42876. In the other variants it is textured like the rest of the part.
(56 months ago, Sep 23, 2019, to Inventories Requests)

Inventory Change Request for Set 31098-1 - paulvdb (7140)

Please make changes to the following inventory: (Set 31098-1) * Change 1 Part Dark Orange {33057 Turkey Drumstick, 20mm with Round Opening on Back to 42876 Turkey Drumstick, 22mm [...]
(56 months ago, Sep 23, 2019, to Inventories Requests)

Inventory Change Request for Set 6952-1 - paulvdb (7140)

Please make changes to the following inventory: (Set 6952-1) * Delete 1 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side * Delete 2 Part 4592c03 Blue Lever Small Base with [...]
(56 months ago, Sep 23, 2019, to Inventories Requests)

Inventory Change Request for Set 6952-1 - paulvdb (7140)

Please make changes to the following inventory: (Set 6952-1) * Add 2 Part 3937c09 Black Hinge Brick 1 x 2 Base with Light Gray Hinge Brick 1 x 2 Top (3937 / 3938) (Counterpart) [...]
(56 months ago, Sep 23, 2019, to Inventories Requests)

Inventory Change Request for Set BL19001-1 - paulvdb (7140)

Please make changes to the following inventory: (Set BL19001-1) * Change 1 Part Dark Orange {33057 Turkey Drumstick, 20mm with Round Opening on Back to 42876 Turkey Drumstick, [...]
(56 months ago, Sep 23, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 6373-1 - paulvdb (7140)

[...] Still difficult to see on those photos. Unfortunately those box art photos were not always very clear. But I think I recognize the 1x1 plates. So I'll accept this [...]
(56 months ago, Sep 23, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 7822-1 - paulvdb (7140)

[...] Earlier I wrote that I didn't remember my own set coming with conducting rails. But I guess my memory was not perfect about this set that I got many years ago. I [...]
(56 months ago, Sep 22, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 702-1 - paulvdb (7140)

[...] Thanks for your reply. Based on your research we can remove the wheels with light gray rims from this inventory. They can always be added again if someone finds evidence [...]
(56 months ago, Sep 22, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 70816-1 - paulvdb (7140)

[...] Two of them are in the inventories of the droid minifigures tlm088 and tlm089. That means that there are already ten in the inventory of this set (use the break minifigures [...]
(56 months ago, Sep 21, 2019, to Inventories Requests)

Inventory Change Request for Set 10223-1 - paulvdb (7140)

Please make changes to the following inventory: (Set 10223-1) * Change 2 Part Red {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or [...]
(56 months ago, Sep 19, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 10223-1 - paulvdb (7140)

[...] I remember that 2453b was approved to the catalog shortly after I inventoried this set. Sets that I parted out and one for my personal collection had a mix of both types [...]
(56 months ago, Sep 19, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 9648-1 - paulvdb (7140)

[...] There were originally 2x x89 in this inventory. You added 1x x90. Should that be 2? Or was there only 1 in this set?
(56 months ago, Sep 17, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 6373-1 - paulvdb (7140)

[...] Based on your photos the presence of the red 3069b and yellow 3794a is clearly visible in the alternate models. Can you post photos showing a bit more detail of the alternate [...]
(56 months ago, Sep 16, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 9499-1 - paulvdb (7140)

[...] Are there different versions of instructions for this set? I just did a quick glance through the instructions that I found at Brick set and only found 8.
(56 months ago, Sep 16, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 702-1 - paulvdb (7140)

[...] It's a bit before my time as well [...] If I remember correctly someone did write something about the transition between the two colors of rims in another change [...]
(56 months ago, Sep 15, 2019, to Inventories Requests)

Inventory Change Request for Set 75810-1 - paulvdb (7140)

Please make changes to the following inventory: (Set 75810-1) * Add 2 Part 44302b Light Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove (Alternate) [...]
(56 months ago, Sep 14, 2019, to Inventories Requests)

Inventory Change Request for Set 75810-1 - paulvdb (7140)

Please make changes to the following inventory: (Set 75810-1) * Add 2 Part 2436c Medium Dark Flesh Bracket 1 x 2 - 1 x 4 with Two Rounded Corners at the Bottom (Alternate) [...]
(56 months ago, Sep 14, 2019, to Inventories Requests)

Re: We have a new Catalog Associate! - paulvdb (7140)

[...] Congrats and welcome.
(56 months ago, Sep 13, 2019, to Catalog)

Re: Inventory Change Request for Set 76086-1 - paulvdb (7140)

[...] I see that new images have been added to these part with stickers applied correctly. I have accepted these request now that the images are correct.
(57 months ago, Sep 12, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 7823-1 - paulvdb (7140)

[...] Sorry it took me a while to get back to this request. My own set was in a location that was a bit inconvenient to reach. I was planning to reorganize a bit here so was [...]
(57 months ago, Sep 12, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 76086-1 - paulvdb (7140)

[...] It also looks like technic half pins were left in the 44225 in both images.
(57 months ago, Sep 10, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 76086-1 - paulvdb (7140)

[...] Looks like the sticker is applied upside down on the image of 3010pb274. Stickers are also wrong on 44225pb001a and 44225pb001b. Stickers should be switched between the [...]
(57 months ago, Sep 10, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 8641-1 - paulvdb (7140)

[...] Based on instructions, set images and image of the stickersheet I believe that the wrong sticker is applied on (Part 6091pb017) This is the same sticker that is also [...]
(57 months ago, Sep 9, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 7942-1 - paulvdb (7140)

[...] This part is already included in the alternate items section of the inventory.
(57 months ago, Sep 6, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 10733-1 - paulvdb (7140)

[...] This part is included in the minifigure inventory for (Minifigure crs016)
(57 months ago, Sep 5, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 088-1 - paulvdb (7140)

[...] The person who inventoried the set confirmed that 3404ac01 should be in this set. See (URL)
(57 months ago, Sep 5, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 5973-1 - paulvdb (7140)

[...] Thanks for bringing this to our attention. But the correct procedure would be to change the quantity of the existing lot to 2. I have done that for you.
(57 months ago, Sep 3, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 70012-1 - paulvdb (7140)

[...] This counterpart does not look right for this set. I'm assuming it should be in set (Set 70012-2) Please submit the request again for that set.
(57 months ago, Sep 3, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 398-1 - paulvdb (7140)

[...] Thanks for that link. So now we know that both variants came in this set. I'll accept this request to change the regular part to 3062a and I'll add 3062b as alternate.
(57 months ago, Aug 27, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 398-1 - paulvdb (7140)

[...] Based on year of release I believe that this set must have originally come with 3062a. And it is a very rare part in light gray, so I doubt that someone would have switched [...]
(57 months ago, Aug 26, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 148-1 - paulvdb (7140)

[...] I have looked at photos of used sets and did not find any with the 6x14 plate. At least none where the photo quality was good enough to recognize the individual plates. [...]
(57 months ago, Aug 25, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 648-1 - paulvdb (7140)

[...] What is your source for this request? Based on set images and instructions the roof is made of one plate 6 x 12 and two plates 2 x 3. This would also mean that plate [...]
(57 months ago, Aug 25, 2019, to Inventories Requests)

Re: Excel - paulvdb (7140)

[...] Not sure if this works different in other language versions of Excel, but based on how I work with formulas in my Dutch version of Excel I think the correct version of [...]
(57 months ago, Aug 25, 2019, to Inventories)

Re: Inventory Change Request for Set 10143-1 - paulvdb (7140)

[...] I found photos of a few more and all of them had this part in light bluish gray. So clearly an error in the instructions.
(57 months ago, Aug 25, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 7641-1 - paulvdb (7140)

[...] That is correct. Only inventories admins can do that. So if this happens in other sets you'll have to ask us to add the match ID. [...] Ok. I have added the extra [...]
(57 months ago, Aug 25, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 7641-1 - paulvdb (7140)

[...] I have fixed the entries for the paddles. The correct way to handle extras for alternate items is a bit difficult to see in a set with so many alternates, so I'll [...]
(57 months ago, Aug 24, 2019, to Inventories Requests)

Re: Excel - paulvdb (7140)

[...] You can open the tab-delimited text file in Excel and save it as an Excel file.
(57 months ago, Aug 24, 2019, to Inventories)

Re: Inventory Change Request for Set 7641-1 - paulvdb (7140)

[...] We don't add alternate minifigures if the only difference is the stud type of the head. So in this case you can add ovr037a as an alternate to the set inventory [...]
(57 months ago, Aug 24, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 7641-1 - paulvdb (7140)

[...] Looks like you got this minifigure? (Minifigure ovr037a) You can add it as an alternate minifigure to the set.
(57 months ago, Aug 23, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 70163-1 - paulvdb (7140)

[...] The procedure to add stickered Counterparts to BrickLink and set inventories is as follows: (1) Add the stickered parts to the BrickLink catalog: (URL) Help on [...]
(57 months ago, Aug 20, 2019, to Inventories Requests)

Re: Cardboard sleeves in inventories - paulvdb (7140)

[...] That is actually not how the system works. If you look at the sets that these axles come in it will still list 60051 among them even though the cardboard sleeve is listed [...]
(57 months ago, Aug 20, 2019, to Inventories)

Re: Inventory Change Request for Set 21045-1 - paulvdb (7140)

[...] I just got this set myself and can confirm that I found 28974 in my set.
(57 months ago, Aug 19, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 347-3 - paulvdb (7140)

[...] Based on the instructions there should indeed be three more of these in the inventory. But the correct way to do that would be to change the quantity of the existing [...]
(57 months ago, Aug 17, 2019, to Inventories Requests)

Inventory Change Request for Set 60229-1 - paulvdb (7140)

Please make changes to the following inventory: (Set 60229-1) * Add 1 Part 2436c Black Bracket 1 x 2 - 1 x 4 with Two Rounded Corners at the Bottom (Alternate) (match [...]
(57 months ago, Aug 16, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 21108-1 - paulvdb (7140)

[...] These are already included as parts of the proton packs in the minifigure inventories.
(57 months ago, Aug 15, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 9516-1 - paulvdb (7140)

[...] These are already included in the set as part of the minifigure inventory for (Minifigure sw0412)
(57 months ago, Aug 15, 2019, to Inventories Requests)

Re: 4460 a/b: wrong height - paulvdb (7140)

[...] Length and width are measured in studs, but height is measured in brick heights. These slopes have the same height as 3 bricks stacked on top of each other.
(58 months ago, Aug 11, 2019, to Catalog)

Inventory Change Request for Set 21318-1 - paulvdb (7140)

Please make changes to the following inventory: (Set 21318-1) * Change 1 Part Reddish Brown {42446 Minifigure, Neck Bracket with Back Stud - Thin Back Wall to 28974 Minifigure, [...]
(58 months ago, Aug 11, 2019, to Inventories Requests)

Re: Inventory Change Request for Minifig tlm209 - paulvdb (7140)

[...] I just changed to the new variant for one of the sets from 2019 that I own (31097). I also checked 70840 and that set still had the old mold 42446.
(58 months ago, Aug 11, 2019, to Inventories Requests)

Inventory Change Request for Set 31097-1 - paulvdb (7140)

Please make changes to the following inventory: (Set 31097-1) * Change 1 Part White {42446 Minifigure, Neck Bracket with Back Stud - Thin Back Wall to 28974 Minifigure, Neck Bracket [...]
(58 months ago, Aug 11, 2019, to Inventories Requests)

Inventory Change Request for Set 21318-1 - paulvdb (7140)

Please make changes to the following inventory: (Set 21318-1) * Change 18 Part Black {44301a Hinge Plate 1 x 2 Locking with 1 Finger On End with Bottom Groove to 44301b Hinge [...]
(58 months ago, Aug 10, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 6544-1 - paulvdb (7140)

[...] These are already in the inventory as tool wheel: (Part 6246c01) Also this is a set from 1995 so they were dark gray, not dark bluish gray.
(58 months ago, Aug 8, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 42030-1 - paulvdb (7140)

[...] In those other cases there are different stickers. In this case the stickers are the same. So in my opinion only two should be added as counterparts in this case.
(58 months ago, Aug 7, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 42030-1 - paulvdb (7140)

[...] There may be 4 stickers, but only 2 tiles. So quantity should be 2 for this counterpart.
(58 months ago, Aug 7, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 10181-1 - paulvdb (7140)

[...] See attached image of the instructions where the bottom pin of a 1x2 plate must be inserted into the hollow stud of a 1x1x5 brick that cannot work with 2453b
(58 months ago, Aug 2, 2019, to Inventories Requests)

Inventory Change Request for Set 10181-1 - paulvdb (7140)

Please make changes to the following inventory: (Set 10181-1) * Change 8 Part Dark Bluish Gray {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked [...]
(58 months ago, Aug 2, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 77902-1 - paulvdb (7140)

[...] The submitter of the inventory has confirmed that it is magenta. Request accepted.
(58 months ago, Jul 31, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 40228-1 - paulvdb (7140)

[...] I have accepted these except for 93273pb101R and 93273pb101R. Those are exactly the same part, so should not have separate left and right side entries in the catalog. [...]
(58 months ago, Jul 31, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 268-1 - paulvdb (7140)

[...] Older sets often had some extra stickers on their sticker sheets. Only one telephone is used in the instructions and the other two pieces 3040a are used in the fireplace. [...]
(58 months ago, Jul 31, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 7750-1 - paulvdb (7140)

[...] Instructions and set images show the stickers applied on a parts assembly next to the door. I don't see stickers on the doors in this set. So this counterpart cannot [...]
(58 months ago, Jul 31, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 7942-1 - paulvdb (7140)

[...] Based on that I also reversed my earlier decision to switch the regular and alternate items.
(58 months ago, Jul 30, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 7942-1 - paulvdb (7140)

[...] Sorry, my mistake. I had assumed that the instructions with the old type hose nozzle with fixed string would be the older version. But looking at the copyright dates [...]
(58 months ago, Jul 30, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 7942-1 - paulvdb (7140)

[...] Done. I also switched the regular and alternate so that the older version is now regular and the new version is alternate. By the way, you mixed up the links to the instructions. [...]
(58 months ago, Jul 30, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 148-1 - paulvdb (7140)

[...] Instructions don't always show the part variants that are actually included in a set. So without other evidence I am going to reject this change request. Many sets [...]
(58 months ago, Jul 29, 2019, to Inventories Requests)

Re: Inventory Change Request for Set 7733-1 - paulvdb (7140)

[...] Part 63082 is already listed as an alternate in this inventory.
(58 months ago, Jul 29, 2019, to Inventories Requests)

Next Page: 5 More | 10 More | 25 More | 50 More | 100 More