Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | axaday  | | Posted: | Aug 13, 2019 11:44 | | Subject: | Inventory Change Request for Part Tricera04 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part {(Variable Color) to Tan} TriBodyc01pb02 Dino Body Triceratops with Olive Green Top with Dark Brown Stripes and Spots Pattern
* Change 1 Part {(Variable Color) to Tan} TriHeadc01pb02 Dino Head Triceratops with Pin, Light Bluish Gray Horns and Beak, Olive Green Top with Dark Brown Pattern
* Change 1 Part {(Variable Color) to Tan} 98172c01pb02 Dino Leg Large (Rear) Triceratops with Pin, Light Bluish Gray Claws and Olive Green and Dark Brown Pattern - Left
* Change 1 Part {(Variable Color) to Tan} 98173c01pb02 Dino Leg Large (Rear) Triceratops with Pin, Light Bluish Gray Claws and Olive Green and Dark Brown Pattern - Right
* Change 1 Part {(Variable Color) to Tan} 98170c01pb02 Dino Leg Small (Front) Triceratops with Pin, Light Bluish Gray Nails and Olive Green and Dark Brown Pattern - Left
* Change 1 Part {(Variable Color) to Tan} 98171c01pb02 Dino Leg Small (Front) Triceratops with Pin, Light Bluish Gray Nails and Olive Green and Dark Brown Pattern - Right
Comments from Submitter:
Whoops!
|
 |
| Author: | pitz8008 | | Posted: | Aug 13, 2019 11:36 | | Subject: | Re: Why can't I enlarge pics anymore? | | Viewed: | 40 times | | Topic: | Catalog | |
|
| In Catalog, firestar246 writes:
| | So you used to be able to click on the picture of a piece in the catalog, sort
of a quick view. You'd see the years it was made, any sets/minifigures the
piece was in, etc. You all know what I'm talking about. Well, a few days
ago I couldn't do it anymore. I've tried three different devices.
Why would they make such a horrible change for? I rely on that heavily when listing
minifigure parts to make sure I have the correct listing. This is going to make
this job twice as long now.
|
Doesn't work for me either. This happened a few weeks ago. Then all of a
sudden I could enlarge them again. Then a couple days ago, it stopped letting
me enlarge them again. A big pain if you ask me.
|
|
| Author: | Hypersync | | Posted: | Aug 13, 2019 09:33 | | Subject: | Re: Why can't I enlarge pics anymore? | | Viewed: | 38 times | | Topic: | Catalog | |
|
| In Catalog, qwertyboy writes:
| | In Catalog, firestar246 writes:
| | So you used to be able to click on the picture of a piece in the catalog, sort
of a quick view. You'd see the years it was made, any sets/minifigures the
piece was in, etc. You all know what I'm talking about. Well, a few days
ago I couldn't do it anymore. I've tried three different devices.
Why would they make such a horrible change for? I rely on that heavily when listing
minifigure parts to make sure I have the correct listing. This is going to make
this job twice as long now.
|
I checked the HTML source for when you go through "Market" - "Parts" - "[some-category]"
and there is no "onclick" or anchor or anything, so this is not a browser issue.
By poking around I fond you can get the old behaviour back by changing the URL
of the page. For instance, when browsing the "Accessory, Human Tool" category,
it lands on the following URL:
https://www.bricklink.com/catalogList.asp?catType=P&catString=990&itemBrand=1000
Now manually change the URL to read as follows (add "Old" in there):
https://www.bricklink.com/catalogListOld.asp?catType=P&catString=990&itemBrand=1000
Extremely clumsy, but if you are really needing large pics on those pages.
Niek.
|
Thank You Sooooooo Much. Life Saver!
|
|
| Author: | Hygrotus | | Posted: | Aug 13, 2019 04:48 | | Subject: | Inventory Change Request for Set 70812-1 | | Viewed: | 33 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3068bpb0507 White Tile 2 x 2 with Groove with Music Notes Pattern (Sticker) - Set 3818 (Counterpart)
|
| Author: | axaday | | Posted: | Aug 12, 2019 22:35 | | Subject: | Inventory Change Request for Set 10082-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part {Trans-Light Orange to Trans-Orange} clikits005b Clikits Icon, Flower 10 Petals 2 x 2 Small with Hole, Polished (Transparent Colors Only)
Comments from Submitter:
I forgot to change the color on this part.
|
|
| Author: | axaday | | Posted: | Aug 12, 2019 22:32 | | Subject: | Inventory Change Request for Set 70838-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 44302a Light Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove (Alternate) (match ID 2)
* Change 2 Part Light Bluish Gray 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove {match ID 0 to 2}
Comments from Submitter:
I parted out 6 sets and all are a
|
|
| Author: | axaday | | Posted: | Aug 12, 2019 20:45 | | Subject: | Inventory Change Request for Set 76118-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Dark Bluish Gray {42446 Minifigure, Neck Bracket with Back Stud - Thin Back Wall to 28974 Minifigure, Neck Bracket with Back Stud - Thick Back Wall} {Extra to Regular}
Comments from Submitter:
Marek’s new piece is in this set
|
|
| Author: | axaday | | Posted: | Aug 12, 2019 20:44 | | Subject: | Inventory Change Request for Minifig Sh587 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Dark Bluish Gray {42446 Minifigure, Neck Bracket with Back Stud - Thin Back Wall to 28974 Minifigure, Neck Bracket with Back Stud - Thick Back Wall}
Comments from Submitter:
New piece Marek discovered is in this set
|
|
| Author: | legoman77 | | Posted: | Aug 12, 2019 19:53 | | Subject: | Re: What set does this piece go to??? | | Viewed: | 36 times | | Topic: | Inventories | |
|
| In Inventories, Mistress_Lisa writes:
| | In Inventories, JayEll3 writes:
| | I have this piece and I don’t know what set it belongs to. I don’t even know
how to search for it. Any help would be appreciated!!
|
It is this part:
According to the catalog, this part comes in 5 sets in that color. All are Jack
Stone, from the 4 Juniors collection.
Lisa
|
I just saw the picture you have up. That is funny. Made me smile today.
John P
|
|
| Author: | Mistress_Lisa | | Posted: | Aug 12, 2019 19:42 | | Subject: | Re: What set does this piece go to??? | | Viewed: | 38 times | | Topic: | Inventories | |
|
| In Inventories, JayEll3 writes:
| | I have this piece and I don’t know what set it belongs to. I don’t even know
how to search for it. Any help would be appreciated!!
|
It is this part:
According to the catalog, this part comes in 5 sets in that color. All are Jack
Stone, from the 4 Juniors collection.
Lisa
|
| Author: | JayEll3 | | Posted: | Aug 12, 2019 19:37 | | Subject: | What set does this piece go to??? | | Viewed: | 104 times | | Topic: | Inventories | | Status: | Open | |
|
| I have this piece and I don’t know what set it belongs to. I don’t even know
how to search for it. Any help would be appreciated!!
|
|
|
| Author: | axaday | | Posted: | Aug 12, 2019 17:49 | | Subject: | Re: Inventory Change Request for Set 10082-1 | | Viewed: | 14 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Change 3 Part {Light Salmon to Trans-Light Orange} clikits034 Clikits Icon Accent, Rubber Flower 10 Petals 2 3/4 x 2 3/4
* Change 2 Part {Light Salmon to Trans-Light Orange} clikits035 Clikits Icon Accent, Rubber Flower 10 Petals 4 1/8 x 4 1/8
* Change 1 Part {Light Salmon to Trans-Light Orange} clikits036 Clikits Icon Accent, Rubber Flower 10 Petals 6 x 6
* Change 4 Part Trans-Light Orange {clikits025u Clikits Bead, Ring Thin Large with Hole (Undetermined Connector Type) to clikits025b Clikits Bead, Ring Thin Large with Hole with Low Connector}
* Change 2 Part {Trans-Light Orange to Trans-Orange} {clikits040 Clikits Cord, Jelly String with 2 Caps - 170mm - top attachment to jellyc170pb164 Clikits Cord, Jelly String with 2 Trans-Light Orange Caps - 170mm - Top Attachment}
* Change 4 Part Trans-Orange {clikits020u Clikits Icon, Flower 10 Petals 2 x 2 Large with Pin - Undetermined Version) to clikits020b Clikits Icon, Flower 10 Petals 2 x 2 Large with Pin, Polished (Transparent Colors Only)}
* Change 2 Part Trans-Light Orange {clikits084 Clikits Icon, Flower 10 Petals 2 x 2 Large with Hole to clikits005b Clikits Icon, Flower 10 Petals 2 x 2 Small with Hole, Polished (Transparent Colors Only)}
* Change 8 Part Trans-Orange {clikits004u Clikits Icon, Flower 10 Petals 2 x 2 Small with Pin - (Undetermined Version) to clikits004b Clikits Icon, Flower 10 Petals 2 x 2 Small with Pin, Polished (Transparent Colors Only)}
* Change 4 Part Trans-Neon Yellow {clikits084 Clikits Icon, Flower 10 Petals 2 x 2 Large with Hole to clikits005a Clikits Icon, Flower 10 Petals 2 x 2 Small with Hole, Frosted (Solid and Transparent Colors)}
Comments from Submitter:
Sealed Set, Pics to follow. This eliminates most of the remaining undetermined Clikits.
|
|
|
|
| Author: | axaday | | Posted: | Aug 12, 2019 17:46 | | Subject: | Inventory Change Request for Set 10082-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part {Light Salmon to Trans-Light Orange} clikits034 Clikits Icon Accent, Rubber Flower 10 Petals 2 3/4 x 2 3/4
* Change 2 Part {Light Salmon to Trans-Light Orange} clikits035 Clikits Icon Accent, Rubber Flower 10 Petals 4 1/8 x 4 1/8
* Change 1 Part {Light Salmon to Trans-Light Orange} clikits036 Clikits Icon Accent, Rubber Flower 10 Petals 6 x 6
* Change 4 Part Trans-Light Orange {clikits025u Clikits Bead, Ring Thin Large with Hole (Undetermined Connector Type) to clikits025b Clikits Bead, Ring Thin Large with Hole with Low Connector}
* Change 2 Part {Trans-Light Orange to Trans-Orange} {clikits040 Clikits Cord, Jelly String with 2 Caps - 170mm - top attachment to jellyc170pb164 Clikits Cord, Jelly String with 2 Trans-Light Orange Caps - 170mm - Top Attachment}
* Change 4 Part Trans-Orange {clikits020u Clikits Icon, Flower 10 Petals 2 x 2 Large with Pin - Undetermined Version) to clikits020b Clikits Icon, Flower 10 Petals 2 x 2 Large with Pin, Polished (Transparent Colors Only)}
* Change 2 Part Trans-Light Orange {clikits084 Clikits Icon, Flower 10 Petals 2 x 2 Large with Hole to clikits005b Clikits Icon, Flower 10 Petals 2 x 2 Small with Hole, Polished (Transparent Colors Only)}
* Change 8 Part Trans-Orange {clikits004u Clikits Icon, Flower 10 Petals 2 x 2 Small with Pin - (Undetermined Version) to clikits004b Clikits Icon, Flower 10 Petals 2 x 2 Small with Pin, Polished (Transparent Colors Only)}
* Change 4 Part Trans-Neon Yellow {clikits084 Clikits Icon, Flower 10 Petals 2 x 2 Large with Hole to clikits005a Clikits Icon, Flower 10 Petals 2 x 2 Small with Hole, Frosted (Solid and Transparent Colors)}
Comments from Submitter:
Sealed Set, Pics to follow. This eliminates most of the remaining undetermined Clikits.
|
|
| Author: | normann1974 | | Posted: | Aug 12, 2019 12:01 | | Subject: | Inventory Change Request for Set 70503-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {1 to 2} Part Pearl Gold 98138 Tile, Round 1 x 1 (Extra)
Comments from Submitter:
I just parted out bags 2 and 3 from this set and got 8 of these tiles (so two extra).
|
|
| Author: | randyf | | Posted: | Aug 12, 2019 11:16 | | Subject: | Re: Elements Exclusive to BaM | | Viewed: | 45 times | | Topic: | Catalog | |
|
| In Catalog, zzed writes:
| | Well now I want the wizard hat with hair. 
|
| | Isn't the black wizard hat # 17349 from the Rise of Voldemort set?
|
Yes.
| | I can't tell if the one in your photo is black.
|
It looks like Dark Blue with stars on it.
Cheers,
Randy
|
|
| Author: | qwertyboy | | Posted: | Aug 12, 2019 10:31 | | Subject: | Re: Why can't I enlarge pics anymore? | | Viewed: | 45 times | | Topic: | Catalog | |
|
| In Catalog, firestar246 writes:
| | So you used to be able to click on the picture of a piece in the catalog, sort
of a quick view. You'd see the years it was made, any sets/minifigures the
piece was in, etc. You all know what I'm talking about. Well, a few days
ago I couldn't do it anymore. I've tried three different devices.
Why would they make such a horrible change for? I rely on that heavily when listing
minifigure parts to make sure I have the correct listing. This is going to make
this job twice as long now.
|
I checked the HTML source for when you go through "Market" - "Parts" - "[some-category]"
and there is no "onclick" or anchor or anything, so this is not a browser issue.
By poking around I fond you can get the old behaviour back by changing the URL
of the page. For instance, when browsing the "Accessory, Human Tool" category,
it lands on the following URL:
https://www.bricklink.com/catalogList.asp?catType=P&catString=990&itemBrand=1000
Now manually change the URL to read as follows (add "Old" in there):
https://www.bricklink.com/catalogListOld.asp?catType=P&catString=990&itemBrand=1000
Extremely clumsy, but if you are really needing large pics on those pages.
Niek.
|
|
| Author: | jennnifer | | Posted: | Aug 12, 2019 09:45 | | Subject: | Re: having trouble clicking on pictures of items | | Viewed: | 32 times | | Topic: | Catalog | |
|
| In Catalog, jjoosephhh writes:
| | when i try to click on a image to look at it and know what characters are in
the set it doesn't allow me to.. Does anyone else have this problem?? more
context images in the catalog or thumbnail
|
https://www.bricklink.com/message.asp?ID=1152248
|
| Author: | msSquirrel | | Posted: | Aug 12, 2019 08:45 | | Subject: | Inventory Change Request for Set 7844-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4653 Light Bluish Gray Duplo Winch Drum Wide (Alternate)
|
|
| Author: | Miro78 | | Posted: | Aug 12, 2019 08:44 | | Subject: | Re: 4460 a/b: wrong height | | Viewed: | 40 times | | Topic: | Catalog | |
|
| In Catalog, WrefordBrown writes:
| | In Catalog, JusTiCe8 writes:
| | Hi,
Looks like this parts:
is taller than described as it is 4 studs high instead of 3 unless there is a
way to measure height I don't know.
Fortunately, there is no 3 studs high slope and I believe any MOCers using the
part just call it by its name and there would be no issue when building.
Strangely, part and all its variants looks like to be also 4 studs
high and not 3 (last pic clearly shows the same aspect ratio as 4460).
By the way 3684 is not marked for deletion yet.
Where was the issue ? "It's not you it's us" or just me ?
Thanks.
|
I used to think this until I found Tom Alphin's lego ruler and sorting tool:
http://tomalphin.com/2014/02/lego-ruler-and-sorting-tool.html
One stud is 8mm wide but a plate is 3.2mm high, therefore the size of a 1x1 brick
is 8mm x 8mm x 9.8mm. I have Tom's guide printed and laminated and reckon
that it has saved me a load of time while sorting!
|
Very handy. Thanks for sharing.
Miro
|
|
| Author: | msSquirrel | | Posted: | Aug 12, 2019 08:32 | | Subject: | Inventory Change Request for Set 7842-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6429pb05 White Duplo Container Water Container with 'JET FUEL CAUTION FLAMMABLE' and Warning Sign Pattern on Both Sides (Stickers) - Set 7843 (Counterpart)
|
|
| Author: | msSquirrel | | Posted: | Aug 12, 2019 08:25 | | Subject: | Inventory Change Request for Set 7841-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4653 Light Bluish Gray Duplo Winch Drum Wide (Alternate)
* Add 1 Part 4654c05 Black Duplo Hose Reel Holder 2 x 2 with Light Bluish Gray Drum, Black Tow Hook, String (Counterpart)
|
|
| Author: | DamoB | | Posted: | Aug 12, 2019 08:20 | | Subject: | Re: 4460 a/b: wrong height | | Viewed: | 39 times | | Topic: | Catalog | |
|
| In Catalog, JusTiCe8 writes:
| | Hi,
Looks like this parts:
is taller than described as it is 4 studs high instead of 3 unless there is a
way to measure height I don't know.
Fortunately, there is no 3 studs high slope and I believe any MOCers using the
part just call it by its name and there would be no issue when building.
Strangely, part and all its variants looks like to be also 4 studs
high and not 3 (last pic clearly shows the same aspect ratio as 4460).
By the way 3684 is not marked for deletion yet.
Where was the issue ? "It's not you it's us" or just me ?
Thanks.
|
I used to think this until I found Tom Alphin's lego ruler and sorting tool:
http://tomalphin.com/2014/02/lego-ruler-and-sorting-tool.html
One stud is 8mm wide but a plate is 3.2mm high, therefore the size of a 1x1 brick
is 8mm x 8mm x 9.8mm. I have Tom's guide printed and laminated and reckon
that it has saved me a load of time while sorting!
|
|
| Author: | zzed | | Posted: | Aug 12, 2019 07:29 | | Subject: | Re: Elements Exclusive to BaM | | Viewed: | 41 times | | Topic: | Catalog | |
|
| Well now I want the wizard hat with hair. Isn't the black wizard hat
# 17349 from the Rise of Voldemort set? I can't tell if the one in your
photo is black.
|
|
| Author: | msSquirrel | | Posted: | Aug 12, 2019 06:25 | | Subject: | Inventory Change Request for Set 9207-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 42025pb02 Red Duplo, Brick 1 x 3 x 2 Triangle Road Sign with Pedestrian Crossing Warning Pattern (Counterpart)
* Add 1 Part 42025pb03 Red Duplo, Brick 1 x 3 x 2 Triangle Road Sign with Construction Worker Pattern (Counterpart)
* Add 2 Part 4066pb178 Tan Duplo, Brick 1 x 2 x 2 with Tied Parcel with Postmark Pattern (Counterpart)
* Add 2 Part 4066pb334 Yellow Duplo, Brick 1 x 2 x 2 with Bus Schedule Pattern (Counterpart)
|
|
| Author: | msSquirrel | | Posted: | Aug 12, 2019 06:21 | | Subject: | Inventory Change Request for Set 9207-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 41970px1 Red Duplo, Brick 1 x 3 x 2 Round Top Road Sign with 'STOP' in Octagon Pattern (Counterpart)
* Add 2 Part 41970px5 Red Duplo, Brick 1 x 3 x 2 Round Top Road Sign with White Bus in White Circle Pattern (Counterpart)
* Add 1 Part 41970pb02 Red Duplo, Brick 1 x 3 x 2 Round Top Road Sign with Left Turning Arrow Pattern (Counterpart)
* Add 1 Part 41970pb03 Red Duplo, Brick 1 x 3 x 2 Round Top Road Sign with Right Turning Arrow Pattern (Counterpart)
* Add 1 Part 31213pb016 Yellow Duplo, Brick 2 x 4 x 2 Curved Top with 'Post' and Horn Blue Pattern (Counterpart)
|
|
| Author: | msSquirrel | | Posted: | Aug 12, 2019 06:01 | | Subject: | Inventory Change Request for Set 9207-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 47438c01pb02 Bright Light Orange Duplo Truck Pickup Flatbed with Dark Bluish Gray Base with Tire and Tools Pattern (Alternate)
|
|
| Author: | anathema | | Posted: | Aug 12, 2019 05:05 | | Subject: | Re: Why can't I enlarge pics anymore? | | Viewed: | 35 times | | Topic: | Catalog | |
|
| In Catalog, firestar246 writes:
| | So you used to be able to click on the picture of a piece in the catalog, sort
of a quick view. You'd see the years it was made, any sets/minifigures the
piece was in, etc. You all know what I'm talking about. Well, a few days
ago I couldn't do it anymore. I've tried three different devices.
Why would they make such a horrible change for? I rely on that heavily when listing
minifigure parts to make sure I have the correct listing. This is going to make
this job twice as long now.
|
It's been broken for weeks. It doesn't affect all pages, which may be
why some people are reporting the issue and others are not.
It's not browser or OS related so far as I can tell - I've tried three
different browsers on two different OSes and three different computers.
The 'add to wanted list' links are also broken randomly.
|
|
| Author: | anathema | | Posted: | Aug 12, 2019 05:03 | | Subject: | Re: having trouble clicking on pictures of items | | Viewed: | 21 times | | Topic: | Catalog | |
|
| In Catalog, jjoosephhh writes:
| | when i try to click on a image to look at it and know what characters are in
the set it doesn't allow me to.. Does anyone else have this problem?? more
context images in the catalog or thumbnail
|
It's been broken for a while; there's another thread from a few days
ago about the issue, and I reported it to the helpdesk weeks ago.
The 'Add to wanted list' links are broken in a lot of places too.
|
|
| Author: | jjoosephhh | | Posted: | Aug 12, 2019 03:11 | | Subject: | having trouble clicking on pictures of items | | Viewed: | 40 times | | Topic: | Catalog | | Status: | Open | |
|
| when i try to click on a image to look at it and know what characters are in
the set it doesn't allow me to.. Does anyone else have this problem?? more
context images in the catalog or thumbnail
|
| Author: | hobbyist69 | | Posted: | Aug 12, 2019 03:07 | | Subject: | Inventory Change Request for Set 4974-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4882 Dark Orange Duplo Animal Accessory Feeding Trough 2 x 4 x 2 with Curved Sides (Alternate) (match ID 1)
Comments from Submitter:
Item 4882 is shown in the picture of this set used on your web site.
|
|
| Author: | BeauBricks | | Posted: | Aug 11, 2019 17:21 | | Subject: | Re: Elements Exclusive to BaM | | Viewed: | 35 times | | Topic: | Catalog | |
|
| In Catalog, Hygrotus writes:
| | In Catalog, yorbrick writes:
| | In Catalog, Hygrotus writes:
| | In Catalog, yorbrick writes:
| | In Catalog, Hygrotus writes:
| | In Catalog, constructibles writes:
| | Just to add to the never-ending "identify this part" questions, it's now
been semi-officially confirmed that LEGO has created exclusive elements for the
BaM (Build a Minifgure) bins in LBR stores. I'm sure this will give more
people headaches for authenticating parts, since they will not appear in any
inventories. Looks interesting though, and I hope they keep introducing new
elements.
|
From month ago 
https://www.promobricks.de/lego-store-neuheiten-minifigur-station/83292
Some of them are alrady in the catalog
|
That one isn't in the BAM. The BAM versions I have seen all come in a gloveless
form and the buyer adds the glove to it.
|
Is it possible that in German or USA LEGO Brand stores it is sell with glove?
|
I assume the boxes they come in are the same. All the ones I have seen in the
UK have been without glove. Of course, staff or other customers could add the
gloves then leave the assembly.
|
We don't have LEGO Brand Store in Poland so no Pick a Brick or Buil a
Minifigure and I have no idea how it looks like.
|
I got 5 new ones from the boxes in the storage at US Lego store. They are supposed
to have the glove, but most people rip it off and put them on another figure.
|
|
| Author: | yorbrick | | Posted: | Aug 11, 2019 17:15 | | Subject: | Re: Elements Exclusive to BaM | | Viewed: | 24 times | | Topic: | Catalog | |
|
| | |
Is it possible that in German or USA LEGO Brand stores it is sell with glove?
|
Also it would not surprise me if some torsos are sold without glove, and so it
would be good to have the gloveless entry, as otherwise some sellers might have
to sell them as missing a glove when in reality it isn't.
|
|
| Author: | Hygrotus | | Posted: | Aug 11, 2019 17:14 | | Subject: | Re: Elements Exclusive to BaM | | Viewed: | 28 times | | Topic: | Catalog | |
|
| In Catalog, yorbrick writes:
| | In Catalog, Hygrotus writes:
| | In Catalog, yorbrick writes:
| | In Catalog, Hygrotus writes:
| | In Catalog, constructibles writes:
| | Just to add to the never-ending "identify this part" questions, it's now
been semi-officially confirmed that LEGO has created exclusive elements for the
BaM (Build a Minifgure) bins in LBR stores. I'm sure this will give more
people headaches for authenticating parts, since they will not appear in any
inventories. Looks interesting though, and I hope they keep introducing new
elements.
|
From month ago
https://www.promobricks.de/lego-store-neuheiten-minifigur-station/83292
Some of them are alrady in the catalog
|
That one isn't in the BAM. The BAM versions I have seen all come in a gloveless
form and the buyer adds the glove to it.
|
Is it possible that in German or USA LEGO Brand stores it is sell with glove?
|
I assume the boxes they come in are the same. All the ones I have seen in the
UK have been without glove. Of course, staff or other customers could add the
gloves then leave the assembly.
|
We don't have LEGO Brand Store in Poland so no Pick a Brick or Buil a
Minifigure and I have no idea how it looks like.
|
|
| Author: | yorbrick | | Posted: | Aug 11, 2019 17:12 | | Subject: | Re: Elements Exclusive to BaM | | Viewed: | 38 times | | Topic: | Catalog | |
|
| In Catalog, Hygrotus writes:
| | In Catalog, yorbrick writes:
| | In Catalog, Hygrotus writes:
| | In Catalog, constructibles writes:
| | Just to add to the never-ending "identify this part" questions, it's now
been semi-officially confirmed that LEGO has created exclusive elements for the
BaM (Build a Minifgure) bins in LBR stores. I'm sure this will give more
people headaches for authenticating parts, since they will not appear in any
inventories. Looks interesting though, and I hope they keep introducing new
elements.
|
From month ago
https://www.promobricks.de/lego-store-neuheiten-minifigur-station/83292
Some of them are alrady in the catalog
|
That one isn't in the BAM. The BAM versions I have seen all come in a gloveless
form and the buyer adds the glove to it.
|
Is it possible that in German or USA LEGO Brand stores it is sell with glove?
|
I assume the boxes they come in are the same. All the ones I have seen in the
UK have been without glove. Of course, staff or other customers could add the
gloves then leave the assembly.
|
|
| Author: | Hygrotus | | Posted: | Aug 11, 2019 17:08 | | Subject: | Re: Elements Exclusive to BaM | | Viewed: | 28 times | | Topic: | Catalog | |
|
| In Catalog, yorbrick writes:
| | In Catalog, Hygrotus writes:
| | In Catalog, constructibles writes:
| | Just to add to the never-ending "identify this part" questions, it's now
been semi-officially confirmed that LEGO has created exclusive elements for the
BaM (Build a Minifgure) bins in LBR stores. I'm sure this will give more
people headaches for authenticating parts, since they will not appear in any
inventories. Looks interesting though, and I hope they keep introducing new
elements.
|
From month ago
https://www.promobricks.de/lego-store-neuheiten-minifigur-station/83292
Some of them are alrady in the catalog
|
That one isn't in the BAM. The BAM versions I have seen all come in a gloveless
form and the buyer adds the glove to it.
|
Is it possible that in German or USA LEGO Brand stores it is sell with glove?
|
|
| Author: | yorbrick | | Posted: | Aug 11, 2019 17:03 | | Subject: | Re: Elements Exclusive to BaM | | Viewed: | 39 times | | Topic: | Catalog | |
|
| In Catalog, Hygrotus writes:
| | In Catalog, constructibles writes:
| | Just to add to the never-ending "identify this part" questions, it's now
been semi-officially confirmed that LEGO has created exclusive elements for the
BaM (Build a Minifgure) bins in LBR stores. I'm sure this will give more
people headaches for authenticating parts, since they will not appear in any
inventories. Looks interesting though, and I hope they keep introducing new
elements.
|
From month ago
https://www.promobricks.de/lego-store-neuheiten-minifigur-station/83292
Some of them are alrady in the catalog
|
That one isn't in the BAM. The BAM versions I have seen all come in a gloveless
form and the buyer adds the glove to it.
|
|
| Author: | randyf | | Posted: | Aug 11, 2019 16:37 | | Subject: | Re: Inventory Change Request for Set 40253-1 | | Viewed: | 15 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, begorny writes:
| | Please make changes to the following inventory:
* Delete 1 Part 4733 White Brick, Modified 1 x 1 with Studs on 4 Sides (Extra)
Comments from Submitter:
Extra Item not included in sealed box.
|
From the Additional Information About Extra Items section of the Inventory
Sections: Regular, Extra, Counterpart, and Alternate help page:
https://www.bricklink.com/help.asp?helpID=1562#extraItems
Removing or Changing Extra Items - Extra parts can vary depending on when
and where a set was manufactured, meaning that some new sets may include them
and others may not. The quantity of these extra parts can also vary. Extra parts
are typically not removed or reduced in quantity unless it can be determined
that they were originally added or increased in error.
This extra part was found in some sealed copies of this set so it will not be
removed and this request will not be accepted.
Cheers,
Randy
|
|
| Author: | vovkmarko | | Posted: | Aug 11, 2019 15:38 | | Subject: | Inventory Change Request for Gear 6995 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part bb881 Medium Blue Bionicle Kanoka Disk Launcher Small
Comments from Submitter:
Part of the set 6995 Piraka Thok Nestle #3
1x bio031 white,
1x bb881 medium blue
1x disc ID ?? Trans-Light Blue
|
| Author: | msSquirrel | | Posted: | Aug 11, 2019 15:34 | | Subject: | Inventory Change Request for Set 9195-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 3966 Green Duplo, Brick 2 x 2 with Pin on Side
|
|
| Author: | Hygrotus | | Posted: | Aug 11, 2019 15:33 | | Subject: | Re: Elements Exclusive to BaM | | Viewed: | 44 times | | Topic: | Catalog | |
|
| In Catalog, Miro78 writes:
| | In Catalog, Hygrotus writes:
| | In Catalog, constructibles writes:
| | Just to add to the never-ending "identify this part" questions, it's now
been semi-officially confirmed that LEGO has created exclusive elements for the
BaM (Build a Minifgure) bins in LBR stores. I'm sure this will give more
people headaches for authenticating parts, since they will not appear in any
inventories. Looks interesting though, and I hope they keep introducing new
elements.
|
From month ago
https://www.promobricks.de/lego-store-neuheiten-minifigur-station/83292
Some of them are alrady in the catalog
|
Can we add years to these. Clearly we know what year these appeared first. Also
it would be nice to note somewhere (item description or sub-category) that these
are exclusive to the Build-A-Minifigure (BaM) station in LBR stores. It will
help to have this information in the future, and the years will make it useful
to place these into some chronological context.
Miro
|
Are we sure that there aren't examples that such item later were used in
normal sets. I do not reckon now such cases when firstly such parts were in BaM
station and later appeared in normal sets but maybe there are such. Then adding
year could be problematic as when parts appear in a set then system add year
automatically and I do not know what bug in the system then occurs
For now we add years for those type parts
https://www.bricklink.com/catalogTree.asp?itemBrand=1000&itemType=P
https://www.bricklink.com/catalogListOld.asp?catType=P&catString=534&itemBrand=1000
The problem is also with normal parts which are in sets but are in colors which
do not appear in sets. Recently were added
in Orange
and
in Bright Light Yellow
There is no possibility to match that they are from BaM station
But for now I added a note for mentioned torso part you can check if it is OK.
|
|
| Author: | msSquirrel | | Posted: | Aug 11, 2019 14:09 | | Subject: | Inventory Change Request for Set 9195-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Gear 3966 Green Basic Style Printed Brick Key Chain - Tiger with Yellow Plate
Comments from Submitter:
Duplo, Brick 2 x 2 with Pin on Side (https://www.bricklink.com/message.asp?ID=1152551)
|
|
| Author: | begorny | | Posted: | Aug 11, 2019 14:05 | | Subject: | Inventory Change Request for Set 40253-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 4733 White Brick, Modified 1 x 1 with Studs on 4 Sides (Extra)
Comments from Submitter:
Extra Item not included in sealed box.
|
|
| Author: | axaday | | Posted: | Aug 11, 2019 13:22 | | Subject: | Inventory Change Request for Set 7519-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Trans-Very Lt Blue {clikits021u Clikits Part Separator with Undetermined Handle to clikits021a Clikits Part Separator with Clikits Logo on Handle}
Comments from Submitter:
My blue ones were mixed up already when I found out about the variant, but eBay listing 264367861634 is for this set with an open box, but sealed bags. I asked the seller to check the variant and post a pic.
|
|
| Author: | Miro78 | | Posted: | Aug 11, 2019 12:55 | | Subject: | Re: 4460 a/b: wrong height | | Viewed: | 41 times | | Topic: | Catalog | |
|
| In Catalog, Hygrotus writes:
| | In Catalog, JusTiCe8 writes:
| | Hi,
Looks like this parts:
is taller than described as it is 4 studs high instead of 3 unless there is a
way to measure height I don't know.
Fortunately, there is no 3 studs high slope and I believe any MOCers using the
part just call it by its name and there would be no issue when building.
Strangely, part and all its variants looks like to be also 4 studs
high and not 3 (last pic clearly shows the same aspect ratio as 4460).
By the way 3684 is not marked for deletion yet.
Where was the issue ? "It's not you it's us" or just me ?
Thanks.
|
https://www.bricklink.com/help.asp?helpID=261
|
This thread is a useful reminder that exemplifies that measurement values without
units creates confusion. I work as a scientist in my day life, and talking about
measurements without units causes same problems.
To the OP, the slope 3684 is 3 bricks tall, which is the same as 9 plates tall
(a brick is 3 plates tall), or 18 Lego units tall (a plate is 2 Lego units).
A good relation measurement is 2x2 brick width is same as 5 plates height, which
means that a 1x1 brick width is 2.5 plates height, therefore the 3684 slope which
is 3 bricks tall = 9 plates height = 4.8 stud widths (12/2.5=3.6). So as you
can see, it makes no sense in referring to this slope as 3.6 stud heights. It's
very confusing. That being said, having units in the dimensions handy, will prevent
further confusions.
Knowing dimensions is very practical when SNOT building, where the orientation
of bricks is placed sideways and combination of upright and sideway bricks.
Here is a useful converter: http://www.studs.sariel.pl
Miro
|
|
| Author: | Miro78 | | Posted: | Aug 11, 2019 12:33 | | Subject: | Re: Elements Exclusive to BaM | | Viewed: | 57 times | | Topic: | Catalog | |
|
| In Catalog, Hygrotus writes:
| | In Catalog, constructibles writes:
| | Just to add to the never-ending "identify this part" questions, it's now
been semi-officially confirmed that LEGO has created exclusive elements for the
BaM (Build a Minifgure) bins in LBR stores. I'm sure this will give more
people headaches for authenticating parts, since they will not appear in any
inventories. Looks interesting though, and I hope they keep introducing new
elements.
|
From month ago
https://www.promobricks.de/lego-store-neuheiten-minifigur-station/83292
Some of them are alrady in the catalog
|
Can we add years to these. Clearly we know what year these appeared first. Also
it would be nice to note somewhere (item description or sub-category) that these
are exclusive to the Build-A-Minifigure (BaM) station in LBR stores. It will
help to have this information in the future, and the years will make it useful
to place these into some chronological context.
Miro
|
|
| Author: | normann1974 | | Posted: | Aug 11, 2019 12:05 | | Subject: | Re: Help with inventory | | Viewed: | 41 times | | Topic: | Inventories | |
|
|
These have now been added to the set inventory.
Now awaiting approval of minifig and set inventories and job should be done.
Approx. 6 hours of unpaid work leaving me with a used set. I think that'll
be my first and last inventory. But thanks for letting me try it out.
/Jan
|
|
| Author: | Elenoe | | Posted: | Aug 11, 2019 11:48 | | Subject: | Re: Hidden Side inventories | | Viewed: | 57 times | | Topic: | Catalog | |
|
| In Catalog, Hygrotus writes:
| | In Catalog, Elenoe writes:
| | Having recently bought the Newbury High School and built it I am surprised to
find the dog Spencer is listed on here as Trans Clear with marbled White, when
the parts list in the inventory clearly places it in White. Should this not
be White with Marbled Trans Clear?
Similarly hs001 has a pending approval inventory in which the submitter is unsure
if the White hoodie with a Red cap should be classified as Red or White. Again
the inventory supplied with the set has this as White.
When compiling inventories should we not give greater weight to the Lego parts
list as to what colour a part is?
And yes the minifigure Jack is identical to the one in 70418-1 J.B's Ghost
Lab - hs001.
|
|
Just doubled checked hs001 and Jack has a different head. hs001 has teeth showing,
but the Jack in 70425 has a closed mouth. The other 3 parts are identical.
| |
In our catalog main color is one which is on the part underside
* | | 35074pb02 Bird, Friends / Elves, Feet Joined with Magenta Body and Bright Light Orange Eyes Pattern (Pepper)
Parts: Animal, Air |
That is why bright light orange not Magenta
* | | 42861pb01 Minifigure, Headgear Helmet SW Stormtrooper with Molded Black Forehead, Eyes, Nose, Chin, and Panels on Back and Printed Dark Bluish Gray Marks and Tan Dirt Stains Pattern (Sandtrooper)
Parts: Minifigure, Headgear |
that is why black not white
Dog underside is trans clear.
This is our policy.
|
|
|
| Author: | Hygrotus | | Posted: | Aug 11, 2019 11:41 | | Subject: | Re: Hidden Side inventories | | Viewed: | 62 times | | Topic: | Catalog | |
|
| In Catalog, Elenoe writes:
| | Having recently bought the Newbury High School and built it I am surprised to
find the dog Spencer is listed on here as Trans Clear with marbled White, when
the parts list in the inventory clearly places it in White. Should this not
be White with Marbled Trans Clear?
Similarly hs001 has a pending approval inventory in which the submitter is unsure
if the White hoodie with a Red cap should be classified as Red or White. Again
the inventory supplied with the set has this as White.
When compiling inventories should we not give greater weight to the Lego parts
list as to what colour a part is?
And yes the minifigure Jack is identical to the one in 70418-1 J.B's Ghost
Lab - hs001.
|
In our catalog main color is one which is on the part underside
* | | 35074pb02 Bird, Friends / Elves, Feet Joined with Magenta Body and Bright Light Orange Eyes Pattern (Pepper)
Parts: Animal, Air |
That is why bright light orange not Magenta
* | | 42861pb01 Minifigure, Headgear Helmet SW Stormtrooper with Molded Black Forehead, Eyes, Nose, Chin, and Panels on Back and Printed Dark Bluish Gray Marks and Tan Dirt Stains Pattern (Sandtrooper)
Parts: Minifigure, Headgear |
that is why black not white
Dog underside is trans clear.
This is our policy.
|
|
| Author: | Elenoe | | Posted: | Aug 11, 2019 11:37 | | Subject: | Hidden Side inventories | | Viewed: | 155 times | | Topic: | Catalog | | Status: | Open | |
|
| Having recently bought the Newbury High School and built it I am surprised to
find the dog Spencer is listed on here as Trans Clear with marbled White, when
the parts list in the inventory clearly places it in White. Should this not
be White with Marbled Trans Clear?
Similarly hs001 has a pending approval inventory in which the submitter is unsure
if the White hoodie with a Red cap should be classified as Red or White. Again
the inventory supplied with the set has this as White.
When compiling inventories should we not give greater weight to the Lego parts
list as to what colour a part is?
And yes the minifigure Jack is identical to the one in 70418-1 J.B's Ghost
Lab - hs001.
|
|
| Author: | Hygrotus | | Posted: | Aug 11, 2019 10:37 | | Subject: | Re: Help with inventory | | Viewed: | 33 times | | Topic: | Inventories | |
|
| In Inventories, normann1974 writes:
| | In Inventories, Hygrotus writes:
Inventory work should be complete now except for two stickered parts that are
still pending.
/Jan
|
|
|
| Author: | normann1974 | | Posted: | Aug 11, 2019 10:32 | | Subject: | Re: Help with inventory | | Viewed: | 27 times | | Topic: | Inventories | |
|
| In Inventories, Hygrotus writes:
Inventory work should be complete now except for two stickered parts that are
still pending.
/Jan
|
|
|
| Author: | Hygrotus | | Posted: | Aug 11, 2019 10:26 | | Subject: | Re: Elements Exclusive to BaM | | Viewed: | 61 times | | Topic: | Catalog | |
|
| In Catalog, constructibles writes:
| | Just to add to the never-ending "identify this part" questions, it's now
been semi-officially confirmed that LEGO has created exclusive elements for the
BaM (Build a Minifgure) bins in LBR stores. I'm sure this will give more
people headaches for authenticating parts, since they will not appear in any
inventories. Looks interesting though, and I hope they keep introducing new
elements.
|
From month ago
https://www.promobricks.de/lego-store-neuheiten-minifigur-station/83292
Some of them are alrady in the catalog
|
|
| Author: | constructibles | | Posted: | Aug 11, 2019 10:20 | | Subject: | Elements Exclusive to BaM | | Viewed: | 197 times | | Topic: | Catalog | | Status: | Open | |
|
| Just to add to the never-ending "identify this part" questions, it's now
been semi-officially confirmed that LEGO has created exclusive elements for the
BaM (Build a Minifgure) bins in LBR stores. I'm sure this will give more
people headaches for authenticating parts, since they will not appear in any
inventories. Looks interesting though, and I hope they keep introducing new
elements.
|
|
|
| Author: | SylvainLS | | Posted: | Aug 11, 2019 09:02 | | Subject: | Re: 4460 a/b: wrong height | | Viewed: | 34 times | | Topic: | Catalog | |
|
| In Catalog, JusTiCe8 writes:
| | Thank you both for the heads up.
Still, parts have "Size: 2 x 1 x 3 in studs"
This is the issue, when many units are used, they have to be explicitly written
to avoid such confusion, as history tells us, help page on BL are not enough.
I suggest to add a note on each single page of inventory for parts (done
by front "code" obviously, default design for parts for instance) about the units
used. Kind of studs from width/length, brick height for height.
|
Or that the size be formatted as “2 x 1 x 3 (studs x studs x bricks)” or, better,
“2 studs x 1 stud x 3 bricks.”
And these suggestions have been made almost every time a remark such as yours
was made but nothing changed 
|
|
| Author: | JusTiCe8 | | Posted: | Aug 11, 2019 08:54 | | Subject: | Re: 4460 a/b: wrong height | | Viewed: | 31 times | | Topic: | Catalog | |
|
| Thank you both for the heads up.
Still, parts have "Size: 2 x 1 x 3 in studs"
This is the issue, when many units are used, they have to be explicitly written
to avoid such confusion, as history tells us, help page on BL are not enough.
I suggest to add a note on each single page of inventory for parts (done
by front "code" obviously, default design for parts for instance) about the units
used. Kind of studs from width/length, brick height for height.
In Catalog, Hygrotus writes:
| | In Catalog, paulvdb writes:
| |
Length and width are measured in studs, but height is measured in brick heights.
These slopes have the same height as 3 bricks stacked on top of each other.
|
And that is why exactly many submitters make that mistake when submitting measurements
of part to the catalog.
|
|
|
| Author: | msSquirrel | | Posted: | Aug 11, 2019 08:26 | | Subject: | Inventory Change Request for Set 4820-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 6510 Trans-Purple Duplo Plant Flower with 1 Top Stud
* Add 1 Part 6510 Magenta Duplo Plant Flower with 1 Top Stud
Comments from Submitter:
incorrect color in description
|
|
| Author: | paolocolombo | | Posted: | Aug 11, 2019 06:37 | | Subject: | Set 8496 counterparts inventory | | Viewed: | 60 times | | Topic: | Catalog | | Status: | Open | |
|
| Point out that in the inventory set 8496 some counterparts are missing:
- 61070 Lime Technic, Panel Car Mudguard Right with sticker
- 61071 Lime Technic, Panel Car Mudguard Left with sticker
- 61069 (2x) Dark Bluish Gray Technic, Block Engine Block Half / Side Intake
with sticker orange outfun and black rhino
- 61069 (2x) Dark Bluish Gray Technic, Block Engine Panel Half / Side Intake
with green sticker 65
|
|
| Author: | Hygrotus | | Posted: | Aug 11, 2019 06:28 | | Subject: | Re: 4460 a/b: wrong height | | Viewed: | 43 times | | Topic: | Catalog | |
|
| In Catalog, JusTiCe8 writes:
| | Hi,
Looks like this parts:
is taller than described as it is 4 studs high instead of 3 unless there is a
way to measure height I don't know.
Fortunately, there is no 3 studs high slope and I believe any MOCers using the
part just call it by its name and there would be no issue when building.
Strangely, part and all its variants looks like to be also 4 studs
high and not 3 (last pic clearly shows the same aspect ratio as 4460).
By the way 3684 is not marked for deletion yet.
Where was the issue ? "It's not you it's us" or just me ?
Thanks.
|
https://www.bricklink.com/help.asp?helpID=261
|
|
| Author: | Hygrotus | | Posted: | Aug 11, 2019 06:27 | | Subject: | Re: 4460 a/b: wrong height | | Viewed: | 35 times | | Topic: | Catalog | |
|
| In Catalog, paulvdb writes:
| | In Catalog, JusTiCe8 writes:
| | Hi,
Looks like this parts:
is taller than described as it is 4 studs high instead of 3 unless there is a
way to measure height I don't know.
Fortunately, there is no 3 studs high slope and I believe any MOCers using the
part just call it by its name and there would be no issue when building.
Strangely, part and all its variants looks like to be also 4 studs
high and not 3 (last pic clearly shows the same aspect ratio as 4460).
By the way 3684 is not marked for deletion yet.
Where was the issue ? "It's not you it's us" or just me ?
Thanks.
|
Length and width are measured in studs, but height is measured in brick heights.
These slopes have the same height as 3 bricks stacked on top of each other.
|
And that is why exactly many submitters make that mistake when submitting measurements
of part to the catalog.
|
|
| Author: | paulvdb | | Posted: | Aug 11, 2019 06:11 | | Subject: | Re: 4460 a/b: wrong height | | Viewed: | 36 times | | Topic: | Catalog | |
|
| In Catalog, JusTiCe8 writes:
| | Hi,
Looks like this parts:
is taller than described as it is 4 studs high instead of 3 unless there is a
way to measure height I don't know.
Fortunately, there is no 3 studs high slope and I believe any MOCers using the
part just call it by its name and there would be no issue when building.
Strangely, part and all its variants looks like to be also 4 studs
high and not 3 (last pic clearly shows the same aspect ratio as 4460).
By the way 3684 is not marked for deletion yet.
Where was the issue ? "It's not you it's us" or just me ?
Thanks.
|
Length and width are measured in studs, but height is measured in brick heights.
These slopes have the same height as 3 bricks stacked on top of each other.
|
|
| Author: | JusTiCe8 | | Posted: | Aug 11, 2019 06:08 | | Subject: | 4460 a/b: wrong height | | Viewed: | 98 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi,
Looks like this parts:
is taller than described as it is 4 studs high instead of 3 unless there is a
way to measure height I don't know.
Fortunately, there is no 3 studs high slope and I believe any MOCers using the
part just call it by its name and there would be no issue when building.
Strangely, part and all its variants looks like to be also 4 studs
high and not 3 (last pic clearly shows the same aspect ratio as 4460).
By the way 3684 is not marked for deletion yet.
Where was the issue ? "It's not you it's us" or just me ?
Thanks.
|
|
|
| Author: | paulvdb | | Posted: | Aug 11, 2019 05:18 | | Subject: | Inventory Change Request for Set 21318-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Reddish Brown {42446 Minifigure, Neck Bracket with Back Stud - Thin Back Wall to 28974 Minifigure, Neck Bracket with Back Stud - Thick Back Wall}
* Change 1 Part Reddish Brown {42446 Minifigure, Neck Bracket with Back Stud - Thin Back Wall to 28974 Minifigure, Neck Bracket with Back Stud - Thick Back Wall} (Extra)
Comments from Submitter:
New variant was not yet in the catalog when this set was inventoried. Submitter of the inventory confirmed that new variant is in this set.
|
|
| Author: | elias3 | | Posted: | Aug 11, 2019 03:37 | | Subject: | Re: Inventory Change Request for Set 60003-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, joeker1 writes:
| | Please make changes to the following inventory:
* Add 1 Part 85861 Yellow Plate, Round 1 x 1 with Open Stud
|
Hi
No... already in see inventory note below.
There are at least 2 different versions of instructions for this set. The differences
for the second version are indicated in this inventory in the Alternate Items
section with Match ID 99.
Quick overview of redesign: The yellow 1 x 1 cone at the end of the fire hose
is inverted so the large end is pointing out. A yellow 1 x 1 round plate with
hole is added to the large end of the cone to hold the water plume.
Stefaan
|
|
| Author: | joeker1 | | Posted: | Aug 11, 2019 03:31 | | Subject: | Inventory Change Request for Set 60003-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 85861 Yellow Plate, Round 1 x 1 with Open Stud
|
| Author: | BricksShop | | Posted: | Aug 11, 2019 02:10 | | Subject: | Inventory Change Request for Set 8969-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 52031pb021 Dark Blue Wedge 4 x 6 x 2/3 Triple Curved with Agents Logo Pattern (Sticker) - Set 8635 (Counterpart)
|
|
| Author: | paulvdb | | Posted: | Aug 11, 2019 01:20 | | Subject: | Re: Inventory Change Request for Minifig tlm209 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Hygrotus writes:
| | Please make changes to the following inventory:
* Change 1 Part Black {42446 Minifigure, Neck Bracket with Back Stud - Thin Back Wall to 28974 Minifigure, Neck Bracket with Back Stud - Thick Back Wall}
Comments from Submitter:
New mold of this part wasn't in the catalog at the time when this minfig and set was inventoried. Set and minifig was inventoried just dew days ago. Corercting then part to proper variant found in the set.
P.S.
I checked other sets from 2019 which I inventoried
In both confirmed old mold 42446 so they are correct (till somebody will find alternate variant)
|
I just changed to the new variant for one of the sets from 2019 that I own (31097).
I also checked 70840 and that set still had the old mold 42446.
|
|
| Author: | paulvdb | | Posted: | Aug 11, 2019 01:16 | | Subject: | Inventory Change Request for Set 31097-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part White {42446 Minifigure, Neck Bracket with Back Stud - Thin Back Wall to 28974 Minifigure, Neck Bracket with Back Stud - Thick Back Wall}
* Change 1 Part White {42446 Minifigure, Neck Bracket with Back Stud - Thin Back Wall to 28974 Minifigure, Neck Bracket with Back Stud - Thick Back Wall} (Extra)
Comments from Submitter:
New variant was not yet in the catalog when I inventoried this set.
|
|
| Author: | electricbaer | | Posted: | Aug 11, 2019 00:32 | | Subject: | Inventory Change Request for Set 41323-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 2335pb200 Yellow Flag 2 x 2 Square with Girl on Snowmobile Pattern (Sticker) - Set 41323 (Counterpart)
|
| Author: | normann1974 | | Posted: | Aug 10, 2019 18:12 | | Subject: | Re: Help with inventory | | Viewed: | 37 times | | Topic: | Inventories | |
|
| Should the statue in this set be considered a minifig?
/Jan
|
|
|
| Author: | SylvainLS | | Posted: | Aug 10, 2019 17:55 | | Subject: | Re: Inventory Change Request for Set 6386-1 | | Viewed: | 26 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, ziddi writes:
| | Please make changes to the following inventory:
* Add 1 Part 3022 Black Plate 2 x 2
* Add 1 Part 3176 Black Plate, Modified 3 x 2 with Hole
Comments from Submitter:
Steps 10 and 13 of the helicopter, pages 3 and 4
|
Déjà dans l’inventaire, en Alternate.
Il y a une note dans l’inventaire:
«
Redesigned during production.
There are at least 2 different versions of instructions for this set. The differences
for the second version are indicated in this inventory in the Alternate Items
section with Match ID 99.
Quick overview of redesign: The attachment of the rotor assembly on the helicopter
was upgraded for increased stability of the rotor and tail section.
»
|
|
| Author: | ziddi | | Posted: | Aug 10, 2019 17:26 | | Subject: | Inventory Change Request for Set 6386-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3022 Black Plate 2 x 2
* Add 1 Part 3176 Black Plate, Modified 3 x 2 with Hole
Comments from Submitter:
Steps 10 and 13 of the helicopter, pages 3 and 4
|
|
| Author: | Hygrotus | | Posted: | Aug 10, 2019 16:19 | | Subject: | Inventory Change Request for Minifig tlm209 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {42446 Minifigure, Neck Bracket with Back Stud - Thin Back Wall to 28974 Minifigure, Neck Bracket with Back Stud - Thick Back Wall}
Comments from Submitter:
New mold of this part wasn't in the catalog at the time when this minfig and set was inventoried. Set and minifig was inventoried just dew days ago. Corercting then part to proper variant found in the set.
P.S.
I checked other sets from 2019 which I inventoried
In both confirmed old mold 42446 so they are correct (till somebody will find alternate variant)
|
|
| Author: | Leinorbert | | Posted: | Aug 10, 2019 16:00 | | Subject: | Inventory Change Request for Set 75187-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6178pb028 Black Tile, Modified 6 x 12 with Studs on Edges with Star Wars Logo and 'BB-8' Pattern (Sticker) - Set 75187 (Counterpart)
|
| Author: | Hygrotus | | Posted: | Aug 10, 2019 12:31 | | Subject: | Re: Help with inventory | | Viewed: | 25 times | | Topic: | Inventories | |
|
| | | BTW, I found the hat. It's part 17349 (previously only been released with
print, e.g. ).
/Jan
|
When you have system plain part you can just add LEGO render from LEGO replacment
parts service.
|
|
| Author: | BricksShop | | Posted: | Aug 10, 2019 10:13 | | Subject: | Inventory Change Request for Set 70665-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 14769pb281 Pearl Gold Tile, Round 2 x 2 with Bottom Stud Holder with Gold Firebird Pattern (Sticker) - Set 70665 (Counterpart)
* Add 1 Part 15068pb196 Black Slope, Curved 2 x 2 No Studs with Red Armor with Gold Links Pattern (Sticker) - Set 70665 (Counterpart)
* Add 2 Part 15068pb197 Black Slope, Curved 2 x 2 No Studs with Red Armor with Gold Links Pattern (Sticker) - Set 70665 (Counterpart)
|
|
| Author: | iprice | | Posted: | Aug 10, 2019 10:10 | | Subject: | Re: Sorting Wanted Lists Alphabetically | | Viewed: | 67 times | | Topic: | Suggestions | |
|
| In Suggestions, Illuminatus writes:
| | It would be really helpful if the site could memorize your last "sort by" setting
in every section and consider it your default, without exception.
For example, if I open a specific wanted list and sort it by item number, then
every next list I open will also be sorted by item number until I set it back
to "item name."
However, no matter how many times I open the master wanted list, i.e. my list
of wanted lists (lol), and sort it alphabetically, as soon as I refresh or revisit
the page the sorting is set back to "newest."
It would be really great if this could be... sorted out. 
Thanks and sorry if this has been brought up before.
|
Yeah, this annoys me too. So "YES!"
|
|
| Author: | Illuminatus | | Posted: | Aug 10, 2019 09:54 | | Subject: | Sorting Wanted Lists Alphabetically | | Viewed: | 50 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| It would be really helpful if the site could memorize your last "sort by" setting
in every section and consider it your default, without exception.
For example, if I open a specific wanted list and sort it by item number, then
every next list I open will also be sorted by item number until I set it back
to "item name."
However, no matter how many times I open the master wanted list, i.e. my list
of wanted lists (lol), and sort it alphabetically, as soon as I refresh or revisit
the page the sorting is set back to "newest."
It would be really great if this could be... sorted out.
Thanks and sorry if this has been brought up before.
|
|
| Author: | Hygrotus | | Posted: | Aug 10, 2019 09:28 | | Subject: | Re: Help with inventory | | Viewed: | 27 times | | Topic: | Inventories | |
|
| In Inventories, normann1974 writes:
| | I do think I'm capable of creating the parts/minifigs/inventory correctly,
but as previously stated, I don't know what names I should use for the parts
and minifigs, and I can't supply correct weight of all of them, neither can
I supply professional photos. I need help with that.
BTW, I found the hat. It's part 17349 (previously only been released with
print, e.g. ).
/Jan
|
As complete minfigs check how other in Harry Potter are named then name it similar.
Names of minfigs should be also how LEGO names them on the box or in the offcial
description of set. (It is on LEGO S&H page)
https://shop.lego.com/en-PL/product/the-rise-of-voldemort-75965
"Includes 4 minifigures: Harry Potter™ with wand and Triwizard Challenge outfit,
Lord Voldemort™ with wand, Peter Pettigrew with wand and a Death Eater™."
So there you have minfig names
https://www.bricklink.com/catalogListOld.asp?pg=1&catString=227&itemBrand=1000&catType=M&v=1
as for weight it is not needed when submitting item to the catalog. Those things
are only needed to get things approved
number
name
image
and that is it.
Weight can be later added by users who can weight it.
Images also don;t need to be super professional
some examples
till we can see what item looks like it is ok.
there are many users who can later correct images to better one.
As for parts names just this advise just look how other similar parts are named
and adjust it to your part
Example one of your torso, look how other are named, there are some things which
are in all torsos names.
https://www.bricklink.com/catalogListOld.asp?pg=1&q=973pb%2A&catLike=W&itemBrand=1000&v=1
last one as an example
and template for naming torsos
Torso [here you enter describtion what pattern is on torso] Pattern / [color]
Arms / [color] Hands
|
|
| Author: | normann1974 | | Posted: | Aug 10, 2019 09:10 | | Subject: | Re: Help with inventory | | Viewed: | 25 times | | Topic: | Inventories | |
|
| I do think I'm capable of creating the parts/minifigs/inventory correctly,
but as previously stated, I don't know what names I should use for the parts
and minifigs, and I can't supply correct weight of all of them, neither can
I supply professional photos. I need help with that.
BTW, I found the hat. It's part 17349 (previously only been released with
print, e.g. ).
/Jan
|
|
| Author: | Hygrotus | | Posted: | Aug 10, 2019 09:02 | | Subject: | Re: Help with inventory | | Viewed: | 32 times | | Topic: | Inventories | |
|
| In Inventories, Hygrotus writes:
| | In Inventories, normann1974 writes:
| | Hello
After having been on BL for a couple of years, both as a buyer and seller and
submitter to the catalog, I wanted to take up the challenge of making an inventory
for a set, and I chose set because I just bought it. At this point,
I have only submitted the sticker sheet to the catalog, and I'm stuck with
10 parts that seem to be new (their PCCs don't exist on BrickLink and I can't
find them through search). I have a few questions for the upcoming work.
1) Should I leave it to a professional to do all this work? I'm thinking
that I can't provide professional pictures of the new parts and I can't
name the remaining parts or supply weight for them.
2) If the answer to 1) is "no", could someone please help me identify the remaining
10 parts or provide me with good names for the parts so I can add them to the
catalog? What do I do with the weight of the parts? I don't have a weight
with the precision needed.
Attached are pictures of the 10 new parts.
/Jan
|
They are mostly minifigs parts, legs, torsos etc. For inventory you should add
comelete minifigures assemblies as showed in the instruction.
https://www.bricklink.com/catalogListOld.asp?itemYear=2019&catString=227&itemBrand=1000&catType=M
This baby infant should be also added as minfig
Here you have similar ones
* | | frnd279 Baby / Infant - with Stud Holder on Back with Smiling Face and Large Eyes Pattern (Baby Ola) (6193930)
Minifigures: Friends |
|
After you add those as minifigs to the set than you can do their inventories
legs:
another new printed legs for the catalog
https://www.bricklink.com/catalogListOld.asp?pg=1&q=970c00%2A&catLike=W&itemBrand=1000&v=1
another new printed torsos
https://www.bricklink.com/catalogListOld.asp?pg=1&q=973pb%2A&catLike=W&itemBrand=1000&v=1
another new printed heads
https://www.bricklink.com/catalogListOld.asp?pg=1&q=3626c%2A&catLike=W&itemBrand=1000&v=1
You can add them as separate parts also (by checking how they are listed in the
catalog at above links) but inv admins will require complete minifigs for this
inventory
https://www.bricklink.com/help.asp?helpID=199
"Minifigures - Include whole minifigures as seen in the instructions without
any hand-held accessories. Parts included in minifigures should not be included
in the Regular Items section. Sometimes a set may contain more of the same parts
found on a minifigure in the set (for example: a set includes three helmets with
castle chin guard, but only one of them is on the minifigure). In these cases
include the whole minifigure and then include any additional parts in the Regular
Items section."
|
|
| Author: | Hygrotus | | Posted: | Aug 10, 2019 08:57 | | Subject: | Re: Help with inventory | | Viewed: | 36 times | | Topic: | Inventories | |
|
| In Inventories, normann1974 writes:
| | Hello
After having been on BL for a couple of years, both as a buyer and seller and
submitter to the catalog, I wanted to take up the challenge of making an inventory
for a set, and I chose set because I just bought it. At this point,
I have only submitted the sticker sheet to the catalog, and I'm stuck with
10 parts that seem to be new (their PCCs don't exist on BrickLink and I can't
find them through search). I have a few questions for the upcoming work.
1) Should I leave it to a professional to do all this work? I'm thinking
that I can't provide professional pictures of the new parts and I can't
name the remaining parts or supply weight for them.
2) If the answer to 1) is "no", could someone please help me identify the remaining
10 parts or provide me with good names for the parts so I can add them to the
catalog? What do I do with the weight of the parts? I don't have a weight
with the precision needed.
Attached are pictures of the 10 new parts.
/Jan
|
They are mostly minifigs parts, legs, torsos etc. For inventory you should add
comelete minifigures assemblies as showed in the instruction.
https://www.bricklink.com/catalogListOld.asp?itemYear=2019&catString=227&itemBrand=1000&catType=M
This baby infant should be also added as minfig
Here you have similar ones
* | | frnd279 Baby / Infant - with Stud Holder on Back with Smiling Face and Large Eyes Pattern (Baby Ola) (6193930)
Minifigures: Friends |
|
|
| Author: | normann1974 | | Posted: | Aug 10, 2019 08:45 | | Subject: | Re: Help with inventory | | Viewed: | 26 times | | Topic: | Inventories | |
|
| Here's the right other side of Peter Pettigrew's head (the first two
images show the same side).
|
|
|
| Author: | normann1974 | | Posted: | Aug 10, 2019 08:43 | | Subject: | Help with inventory | | Viewed: | 89 times | | Topic: | Inventories | | Status: | Open | |
|
| Hello
After having been on BL for a couple of years, both as a buyer and seller and
submitter to the catalog, I wanted to take up the challenge of making an inventory
for a set, and I chose set because I just bought it. At this point,
I have only submitted the sticker sheet to the catalog, and I'm stuck with
10 parts that seem to be new (their PCCs don't exist on BrickLink and I can't
find them through search). I have a few questions for the upcoming work.
1) Should I leave it to a professional to do all this work? I'm thinking
that I can't provide professional pictures of the new parts and I can't
name the remaining parts or supply weight for them.
2) If the answer to 1) is "no", could someone please help me identify the remaining
10 parts or provide me with good names for the parts so I can add them to the
catalog? What do I do with the weight of the parts? I don't have a weight
with the precision needed.
Attached are pictures of the 10 new parts.
/Jan
|
|
|
| Author: | gloudo | | Posted: | Aug 10, 2019 07:56 | | Subject: | Re: Alternate Item Relations | | Viewed: | 27 times | | Topic: | Catalog | |
|
| In Catalog, gloudo writes:
| | Hi All,
I'm building a database in MS Access where I want to compare my sets with
a different set to see if I can build the different set with the parts I have.
What I like to know is, is there a downloadable table with related items, so
if I don't have the original inventory item the DB will search the alternative
items to see if there is a match and give me the quantity of the alternate item?
Or is there an other way to relate the alternate item to the original inventory
item?
Thanx
|
Thanx all for the quick replies.
I found a downloadable table on rebrickable. For me that is the most useful solution
for my problem.
|
|
|
| Author: | Soviet | | Posted: | Aug 10, 2019 07:30 | | Subject: | Re: Alternate Item Relations | | Viewed: | 23 times | | Topic: | Catalog | |
|
| In Catalog, gloudo writes:
| | Hi All,
I'm building a database in MS Access where I want to compare my sets with
a different set to see if I can build the different set with the parts I have.
What I like to know is, is there a downloadable table with related items, so
if I don't have the original inventory item the DB will search the alternative
items to see if there is a match and give me the quantity of the alternate item?
Or is there an other way to relate the alternate item to the original inventory
item?
Thanx
|
Have you heard about Rebrickable.com?
|
|
| Author: | gloudo | | Posted: | Aug 10, 2019 07:22 | | Subject: | Alternate Item Relations | | Viewed: | 48 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi All,
I'm building a database in MS Access where I want to compare my sets with
a different set to see if I can build the different set with the parts I have.
What I like to know is, is there a downloadable table with related items, so
if I don't have the original inventory item the DB will search the alternative
items to see if there is a match and give me the quantity of the alternate item?
Or is there an other way to relate the alternate item to the original inventory
item?
Thanx
|
|
| Author: | paulvdb | | Posted: | Aug 10, 2019 02:15 | | Subject: | Inventory Change Request for Set 21318-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 18 Part Black {44301a Hinge Plate 1 x 2 Locking with 1 Finger On End with Bottom Groove to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 14 Part Dark Bluish Gray {44301a Hinge Plate 1 x 2 Locking with 1 Finger On End with Bottom Groove to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
Submitter of the inventory sent me an email. These should both be 44301b
|
|
| Author: | Hypersync | | Posted: | Aug 9, 2019 22:54 | | Subject: | Re: Why can't I enlarge pics anymore? | | Viewed: | 46 times | | Topic: | Catalog | |
|
| In Catalog, legoman77 writes:
| | In Catalog, firestar246 writes:
| | So you used to be able to click on the picture of a piece in the catalog, sort
of a quick view. You'd see the years it was made, any sets/minifigures the
piece was in, etc. You all know what I'm talking about. Well, a few days
ago I couldn't do it anymore. I've tried three different devices.
Why would they make such a horrible change for? I rely on that heavily when listing
minifigure parts to make sure I have the correct listing. This is going to make
this job twice as long now.
|
Try sildenafil. Might help.
John P
|
Wonder how many googled sildenafil. Now I get it... I Think
|
|
| Author: | Hypersync | | Posted: | Aug 9, 2019 22:50 | | Subject: | Re: Why can't I enlarge pics anymore? | | Viewed: | 30 times | | Topic: | Catalog | |
|
| In Catalog, firestar246 writes:
| | So you used to be able to click on the picture of a piece in the catalog, sort
of a quick view. You'd see the years it was made, any sets/minifigures the
piece was in, etc. You all know what I'm talking about. Well, a few days
ago I couldn't do it anymore. I've tried three different devices.
Why would they make such a horrible change for? I rely on that heavily when listing
minifigure parts to make sure I have the correct listing. This is going to make
this job twice as long now.
|
Same here using Chrome Windows 10. Checked it at the work computer with Firefox
and same... No large images on click. I really hope they fix it soon. Really
slow looking up minifig torsos or the figs themselves.
|
|
| Author: | axaday | | Posted: | Aug 9, 2019 19:02 | | Subject: | Inventory Change Request for Set 7542-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Trans-Light Purple {clikits021u Clikits Part Separator, Undetermined Logo to clikits021a Clikits Part Separator, 'Clikits' on Handle}
Comments from Submitter:
I had this set before I knew about the variation, but it is the only instance of trans-light purple and I still have the piece.
|
|
| Author: | axaday | | Posted: | Aug 9, 2019 19:00 | | Subject: | Inventory Change Request for Set 7537-1 | | Viewed: | 11 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Trans-Purple {clikits021u Clikits Part Separator, Undetermined Logo to clikits021a Clikits Part Separator, 'Clikits' on Handle}
Comments from Submitter:
This set arrived after I knew about the variation, so the piece was kept segregated.
|
|
| Author: | axaday | | Posted: | Aug 9, 2019 18:59 | | Subject: | Inventory Change Request for Set 7536-1 | | Viewed: | 12 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Trans-Purple {clikits021u Clikits Part Separator, Undetermined Logo to clikits021a Clikits Part Separator, 'Clikits' on Handle}
Comments from Submitter:
This set arrived after I knew about the variation and I kept the piece segregated with its set.
|
|
| Author: | axaday | | Posted: | Aug 9, 2019 18:54 | | Subject: | Inventory Change Request for Set 7517-1 | | Viewed: | 11 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Trans-Pink {clikits021u Clikits Part Separator, Undetermined Logo to clikits021b Clikits Part Separator, Heart Flower and Star on Handle}
Comments from Submitter:
I had this set parted out before I knew about the variation, but it was the only one I had and did not sell, so it was still with its set.
|
|
| Author: | axaday | | Posted: | Aug 9, 2019 18:52 | | Subject: | Inventory Change Request for Set 7510-1 | | Viewed: | 12 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Trans-Pink {clikits021u Clikits Part Separator, Undetermined Logo to clikits021b Clikits Part Separator, Heart Flower and Star on Handle}
Comments from Submitter:
This set arrived after I was aware of the variant and I kept it segregated.
|
|
| Author: | axaday | | Posted: | Aug 9, 2019 18:50 | | Subject: | Inventory Change Request for Set 7528-1 | | Viewed: | 8 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Trans-Pink {clikits021u Clikits Part Separator, Undetermined Logo to clikits021a Clikits Part Separator, 'Clikits' on Handle}
Comments from Submitter:
This set arrived after I was aware of the variant and I kept it separate.
|
|
| Author: | axaday | | Posted: | Aug 9, 2019 18:47 | | Subject: | Inventory Change Request for Set 7511-1 | | Viewed: | 11 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Trans-Light Orange {clikits021u Clikits Part Separator, Undetermined Logo to clikits021b Clikits Part Separator, Heart Flower and Star on Handle}
Comments from Submitter:
My pieces from 7502, 7529, and 7511 were all mixed together before I knew about this variation, But happily all three are the b variant.
|
|
| Author: | axaday | | Posted: | Aug 9, 2019 18:46 | | Subject: | Inventory Change Request for Set 7529-1 | | Viewed: | 8 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Trans-Light Orange {clikits021u Clikits Part Separator, Undetermined Logo to clikits021b Clikits Part Separator, Heart Flower and Star on Handle}
Comments from Submitter:
My pieces from 7502, 7529, and 7511 were all mixed together before I knew about this variation, But happily all three are the b variant.
|
|
| Author: | axaday | | Posted: | Aug 9, 2019 18:46 | | Subject: | Inventory Change Request for Set 7502-1 | | Viewed: | 9 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Trans-Light Orange {clikits021u Clikits Part Separator, Undetermined Logo to clikits021b Clikits Part Separator, Heart Flower and Star on Handle}
Comments from Submitter:
My pieces from 7502, 7529, and 7511 were all mixed together before I knew about this variation, But happily all three are the b variant.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
USA, Oklahoma
Poland, w. Wielkopolskie
)
)
)
)
Denmark
Canada, Alberta
Russia, Moscow Region
United Kingdom, England
Netherlands, Zuid-Holland
Slovenia
Germany, Nordrhein-Westfalen
France, Nouvelle-Aquitaine
Italy, Veneto
Belgium, Oost-Vlaanderen
Hungary, Jász-Nagykun-Szolnok
Bulgaria, Sofia City
)
)
