Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | normann1974 | Posted: | Apr 21, 2024 13:20 | Subject: | Re: Inventory Change Request for Set 76422-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, jennnifer writes:
| In Inventories Requests, BunteBausteine writes:
| Please make changes to the following inventory:
* Add 28 Part 73878 Orange Window 3 x 3 x 2 Round Corner (Counterpart)
* Add 56 Part 60601 Trans-Clear Glass for Window 1 x 2 x 2 Flat Front (Counterpart)
Comments from Submitter:
I would like to add a new counterpart to the set number 76422-1, namely 28x
the counterpart "Orange Window 3 x 3 x 2 Round Corner with Trans-Clear Glasses
(73878 / 60601)".
|
To my knowledge, they only add Window counterparts when the glass is very difficult
to remove. I just tested it and it was fairly difficult unless you get the angle
just right. You will need an admin to weigh in on this one! If they agree, a
new part would need to be added to the Catalog before it could be added to the
inventory.
~Jen
|
I believe someone (you?) a few weeks ago made a similar request which was rejected
for the same reason I'm rejecting this.
I am not in a position to decide whether or not the window/glass counterpart
you are thinking of is applicable for addition to the BrickLink catalog (for
reasons explained by Jen in this thread), but if it is, you would have to add
this new part to the catalog (along with a photo and its inventory) before it
can be added as a counterpart in this inventory. Catalog admins would decide
if the part is valid.
As an inventory admin, I must reject this request because the two parts you are
suggesting do not constitute valid counterparts for this set.
Please see:
https://www.bricklink.com/help.asp?helpID=1562
for details about counterparts.
/Jan
|
|
Author: | axaday | Posted: | Apr 21, 2024 13:19 | Subject: | Inventory Change Request for Set 8211-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads (Undetermined Type) to 42611 Tire 17.5mm D. x 6mm with Shallow Staggered Treads}
* Change 2 Part Blue {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 4 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 7 Part Light Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 6 Part White {30237 Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) to 30237a Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip)}
Comments from Submitter:
Sealed set, pics following. Purchased in late November, just opened.
|
|
Author: | normann1974 | Posted: | Apr 21, 2024 13:09 | Subject: | Re: Inventory Change Request for Set 9702-1 | Viewed: | 31 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, JulieK writes:
| In Inventories Requests, JulieK writes:
| Please make changes to the following inventory:
* Delete 2 Part x77 Black String, Cord (Undetermined Type)
* Add 1 Part x77ac75 Black String, Cord Thin 75cm
Comments from Submitter:
I measured the black string to be 75cm (from 2 new sets with no bin). However, I am only seeing 1 string in each set. I bought these 2nd hand and the 1x16 tech bricks were not polybagged, nor were the long electric cables. I suppose it's possible those parts were polybagged with a string, but since I am only seeing 1 string, I'm only requesting a delete/add for 1 string. I'll attach a pic of the polybag the string came in. Thanks!
|
Did some more digging. Inventory card shows 1 string:
https://www.bricklink.com/message.asp?ID=1201259
|
I also found the photo of another cardboard that only shows one string. So I
will accept this change.
It's strange that the old request never fixed the quantity of the strings.
Any chance that the second string was an extra?
Large parts are known to come without being polybagged in some sets, especially
in the 90's. So I think these were never packaged in this set.
/Jan
|
|
Author: | normann1974 | Posted: | Apr 21, 2024 12:54 | Subject: | Re: Inventory Change Request for Set 9702-1 | Viewed: | 28 times | Topic: | Inventories Requests | |
|
| | I requested to delete 1, but looks like it automatically requested to delete
2?
|
Using the "delete" action will cause the whole inventory entry to be
deleted, i.e. both strings. Using the action "change" instead, you can
change the quantity from 2 to 1.
/Jan
|
|
Author: | axaday | Posted: | Apr 21, 2024 12:53 | Subject: | Re: Inventory Change Request for Set 5858-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 2 Part Dark Pink {6192 Slope, Curved 2 x 4 Double (Undetermined Type) to 6192a Slope, Curved 2 x 4 Double without Groove}
Comments from Submitter:
Sealed set, pics following. Purchased at end of November 2023 and just opened.
|
|
|
|
Author: | axaday | Posted: | Apr 21, 2024 12:53 | Subject: | Inventory Change Request for Set 5858-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Dark Pink {6192 Slope, Curved 2 x 4 Double (Undetermined Type) to 6192a Slope, Curved 2 x 4 Double without Groove}
Comments from Submitter:
Sealed set, pics following. Purchased at end of November 2023 and just opened.
|
|
Author: | nuparu1997 | Posted: | Apr 21, 2024 11:10 | Subject: | Inventory Change Request for Set 8556-1 | Viewed: | 37 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 41752 Dark Gray Rubber Band / Belt Holder 2 x 4 x 2 1/3 (Extra)
Comments from Submitter:
As the set includes 2 rubber belts they are supplied on a holder. Other Bionicle sets have it in their inventory but this one does not for some reason.
|
|
Author: | Nathan123 | Posted: | Apr 21, 2024 05:57 | Subject: | Inventory Change Request for Set 10040-1 | Viewed: | 38 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifigure pi198 Pirate Blue / White Stripes Shirt, Blue Legs, Red Bandana, Belt with Black Buckle (Alternate) (match ID 76006)
* Add 1 Minifigure pi199 Pirate Blue / White Stripes Shirt, White Legs, Red Bandana, Belt with Black Buckle (Alternate) (match ID 76007)
|
|
Author: | iragm | Posted: | Apr 20, 2024 20:52 | Subject: | Inventory Change Request for Set 6668-1 | Viewed: | 40 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {x77 String, Cord (Undetermined Type) to x77ac15 String, Cord Thin 15cm}
* Change 1 Part Black {x137 Rubber Band Medium (Square Cross Section) Thin Cut to x264 Rubber Band Large (Square Cross Section)}
* Change 1 Part Black {x137 Rubber Band Medium (Square Cross Section) Thin Cut to x264 Rubber Band Large (Square Cross Section)} (Extra)
Comments from Submitter:
I measured the original string on my copy of the set - it's 15 cm.
The x137 rubber band cannot physically reach under the truck - look at the instructions for how this part is used in the build. The x264 rubber band fits, and appears to work smoothly, although I don't know if that is the rubber band size that was originally supplied. The change log shows that the rubber band was originally listed as a small rubber band, so unless someone has a sealed copy of this set to measure from, it's hard to know for sure.
|
|
Author: | Nubs_Select | Posted: | Apr 20, 2024 16:56 | Subject: | Inventory Change Request for Set 42110-1 | Viewed: | 48 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 5 Part 49294c01 Black Wheel 56mm D. x 34mm Technic Racing Medium, 6 Pin Holes, Axle Hole, Open Spokes with Black Tire 81.6 x 36 R Technic Straight Tread (49294 / x1825) (Counterpart)
|
|
Author: | jennnifer | Posted: | Apr 20, 2024 11:24 | Subject: | Re: Inventory Change Request for Set 76422-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, BunteBausteine writes:
| Please make changes to the following inventory:
* Add 28 Part 73878 Orange Window 3 x 3 x 2 Round Corner (Counterpart)
* Add 56 Part 60601 Trans-Clear Glass for Window 1 x 2 x 2 Flat Front (Counterpart)
Comments from Submitter:
I would like to add a new counterpart to the set number 76422-1, namely 28x
the counterpart "Orange Window 3 x 3 x 2 Round Corner with Trans-Clear Glasses
(73878 / 60601)".
|
To my knowledge, they only add Window counterparts when the glass is very difficult
to remove. I just tested it and it was fairly difficult unless you get the angle
just right. You will need an admin to weigh in on this one! If they agree, a
new part would need to be added to the Catalog before it could be added to the
inventory.
~Jen
|
|
Author: | TakeAbricK | Posted: | Apr 19, 2024 23:55 | Subject: | Inventory Change Request for Set 9797-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 71140 Black Electric Power Adapter / Transformer, 240V - 10V, AC (UK TRADANIA Version) (Extra)
Comments from Submitter:
According to submitter (who is no longer registered), this adapter came in this set.
|
|
Author: | WyoCam | Posted: | Apr 19, 2024 23:37 | Subject: | Inventory Change Request for Set 76115-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 47456pb015 Red Slope, Curved 3 x 2 x 2/3 with 2 Studs, Wing End with Black Lines and Blue Hull Plates Pattern (Sticker) - Set 76114 (Counterpart)
Comments from Submitter:
Page 17 of instructions
|
|
Author: | WyoCam | Posted: | Apr 19, 2024 23:19 | Subject: | Inventory Change Request for Set 76115-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 98834pb40L White Vehicle, Spoiler with Bar Handle with Medium Azure Spider Web and Magenta Armor Plate Pattern Model Left Side (Sticker) - Set 76115 (Counterpart)
* Add 1 Part 98834pb40R White Vehicle, Spoiler with Bar Handle with Medium Azure Spider Web and Magenta Armor Plate Pattern Model Right Side (Sticker) - Set 76115 (Counterpart)
Comments from Submitter:
Page 41 of instructions
|
|
Author: | JulieK | Posted: | Apr 19, 2024 14:23 | Subject: | Re: Inventory Change Request for Set 9702-1 | Viewed: | 31 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, JulieK writes:
| Please make changes to the following inventory:
* Delete 2 Part x77 Black String, Cord (Undetermined Type)
* Add 1 Part x77ac75 Black String, Cord Thin 75cm
Comments from Submitter:
I measured the black string to be 75cm (from 2 new sets with no bin). However, I am only seeing 1 string in each set. I bought these 2nd hand and the 1x16 tech bricks were not polybagged, nor were the long electric cables. I suppose it's possible those parts were polybagged with a string, but since I am only seeing 1 string, I'm only requesting a delete/add for 1 string. I'll attach a pic of the polybag the string came in. Thanks!
|
Did some more digging. Inventory card shows 1 string:
https://www.bricklink.com/message.asp?ID=1201259
|
|
Author: | jennnifer | Posted: | Apr 19, 2024 14:02 | Subject: | Re: Inventory Change Request for Set 850777-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, jennnifer writes:
| Please make changes to the following inventory:
* Change 4 Part Tan {30237 Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) to 30237b Brick, Modified 1 x 2 with Open O Clip Thick (Vertical Grip)}
Comments from Submitter:
Open set, sealed bag of parts.
|
For reference:
3048c in Dark Green (flat pin)
93789 in Flat Silver (flat end)
3794a in Reddish Brown (without groove)
2460 in Black (round pin hole)
2555 in Black (rounded clip)
|
|
Author: | jennnifer | Posted: | Apr 19, 2024 13:56 | Subject: | Inventory Change Request for Set 850777-1 | Viewed: | 38 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Tan {30237 Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) to 30237b Brick, Modified 1 x 2 with Open O Clip Thick (Vertical Grip)}
Comments from Submitter:
Open set, sealed bag of parts.
|
|
Author: | JulieK | Posted: | Apr 19, 2024 13:06 | Subject: | Re: Inventory Change Request for Set 9702-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, JulieK writes:
| Please make changes to the following inventory:
* Delete 2 Part x77 Black String, Cord (Undetermined Type)
* Add 1 Part x77ac75 Black String, Cord Thin 75cm
Comments from Submitter:
I measured the black string to be 75cm (from 2 new sets with no bin). However, I am only seeing 1 string in each set. I bought these 2nd hand and the 1x16 tech bricks were not polybagged, nor were the long electric cables. I suppose it's possible those parts were polybagged with a string, but since I am only seeing 1 string, I'm only requesting a delete/add for 1 string. I'll attach a pic of the polybag the string came in. Thanks!
|
I requested to delete 1, but looks like it automatically requested to delete
2?
|
|
Author: | JulieK | Posted: | Apr 19, 2024 13:05 | Subject: | Re: Inventory Change Request for Set 9702-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, JulieK writes:
| Please make changes to the following inventory:
* Delete 2 Part x77 Black String, Cord (Undetermined Type)
* Add 1 Part x77ac75 Black String, Cord Thin 75cm
Comments from Submitter:
I measured the black string to be 75cm (from 2 new sets with no bin). However, I am only seeing 1 string in each set. I bought these 2nd hand and the 1x16 tech bricks were not polybagged, nor were the long electric cables. I suppose it's possible those parts were polybagged with a string, but since I am only seeing 1 string, I'm only requesting a delete/add for 1 string. I'll attach a pic of the polybag the string came in. Thanks!
|
|
|
|
Author: | JulieK | Posted: | Apr 19, 2024 13:00 | Subject: | Inventory Change Request for Set 9702-1 | Viewed: | 36 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part x77 Black String, Cord (Undetermined Type)
* Add 1 Part x77ac75 Black String, Cord Thin 75cm
Comments from Submitter:
I measured the black string to be 75cm (from 2 new sets with no bin). However, I am only seeing 1 string in each set. I bought these 2nd hand and the 1x16 tech bricks were not polybagged, nor were the long electric cables. I suppose it's possible those parts were polybagged with a string, but since I am only seeing 1 string, I'm only requesting a delete/add for 1 string. I'll attach a pic of the polybag the string came in. Thanks!
|
|
Author: | BunteBausteine | Posted: | Apr 19, 2024 10:15 | Subject: | Inventory Change Request for Set 76422-1 | Viewed: | 34 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 28 Part 73878 Orange Window 3 x 3 x 2 Round Corner (Counterpart)
* Add 56 Part 60601 Trans-Clear Glass for Window 1 x 2 x 2 Flat Front (Counterpart)
Comments from Submitter:
I would like to add a new counterpart to the set number 76422-1, namely 28x
the counterpart "Orange Window 3 x 3 x 2 Round Corner with Trans-Clear Glasses
(73878 / 60601)".
|
|
Author: | normann1974 | Posted: | Apr 18, 2024 15:14 | Subject: | Re: Inventory Change Request for Set 60000-1 | Viewed: | 31 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SuperGoofy_girl writes:
| Please make changes to the following inventory:
* Delete 1 Part 6126b Trans-Orange Wave Rounded Straight with Bar End (Castle Dragon Flame / Seaweed / Water)
* Add 1 Part 6126 Trans-Orange Wave Rounded Straight with Bar End and Small Pins (Castle Dragon Flame / Seaweed / Water)
Comments from Submitter:
instruction entry
|
Instructions are produced long before the actual parts in the set, so instructions
are not considered a reliable source for inventories by BrickLink.
Unless this can be confirmed by a sealed set, BrickLink can't accept this
change.
This request will therefore be rejected.
/Jan
|
|
Author: | normann1974 | Posted: | Apr 18, 2024 15:06 | Subject: | Re: Inventory Change Request for Set 71793-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Richy_s writes:
| Please make changes to the following inventory:
* Add 1 Part 93606pb193 Nougat Slope, Curved 4 x 2 with Dark Red Scales and Dark Purple and Medium Lavender Skin Top Half Pattern (Sticker) - Set 71793 (Counterpart)
* Add 1 Part 93606pb194 Nougat Slope, Curved 4 x 2 with Dark Red Scales and Dark Purple and Medium Lavender Skin Bottom Half Pattern (Sticker) - Set 71793 (Counterpart)
* Add 2 Part 22385pb322 Dark Red Tile, Modified 2 x 3 Pentagonal with Nougat Scales Pattern (Sticker) - Set 71793 (Counterpart)
* Add 2 Part 22385pb323 Dark Red Tile, Modified 2 x 3 Pentagonal with Nougat Scales with Dark Purple Skin Background Pattern (Sticker) - Set 71793 (Counterpart)
* Add 2 Part 14769pb665 Pearl Gold Tile, Round 2 x 2 with Bottom Stud Holder with Dark Purple Circle, Medium Lavender Ninjago Symbol, Dark Red Curved Lines in Black Ring Pattern (Sticker) - Set 71793 (Counterpart)
* Add 4 Part 15068pb535 Dark Red Slope, Curved 2 x 2 x 2/3 with Nougat Scales Pattern (Sticker) - Set 71793 (Counterpart)
* Add 1 Part 22385pb295 Black Tile, Modified 2 x 3 Pentagonal with Gold Lines, Armor Plates and Dark Red and Orange Emblem Pattern (Sticker) - Set 71793 (Counterpart)
* Add 1 Part 24309pb047 Dark Red Slope, Curved 3 x 2 with Gold Armor Plates and Black Ninjago Logogram Letter K Pattern (Sticker) - Set 71793 (Counterpart)
Comments from Submitter:
Page numbers of sticker applications, according to 71793 instruction pdf: 6491753.pdf
1: page 54
2: page 54
3: page 87
4: page 65
5: page 46, 49
6: page 55, 57, 66, 73
7: page 13
8: page 91
|
These changes have all been approved, although the current photo of part 22385pb3229
is of the wrong color. I will ask this to be fixed.
/Jan
|
|
Author: | Turez | Posted: | Apr 17, 2024 10:25 | Subject: | Re: Inventory Change Request for Set 032-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| Please make changes to the following inventory:
* Change 1 Minifigure {dupfig013 Duplo 2 x 2 x 2 Figure Brick Early, Male on Blue Base, Black Hair, Wide Smile to dupfig044 Duplo 2 x 2 x 2 Figure Brick Early, Male on Blue Base, Brown Hair, Wide Smile}
Comments from Submitter:
Source: Set image and box.
|
Ebay 285079157995
|
|
|
Author: | Turez | Posted: | Apr 17, 2024 10:24 | Subject: | Inventory Change Request for Set 032-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Minifigure {dupfig013 Duplo 2 x 2 x 2 Figure Brick Early, Male on Blue Base, Black Hair, Wide Smile to dupfig044 Duplo 2 x 2 x 2 Figure Brick Early, Male on Blue Base, Brown Hair, Wide Smile}
Comments from Submitter:
Source: Set image and box.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|