Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | samsam2  | | Posted: | Apr 6, 2021 10:24 | | Subject: | Inventory Change Request for Set 70355-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {44567 Hinge Plate 1 x 2 Locking with 1 Finger on Side (Undetermined Type) to 44567b Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove}
|
 |
| Author: | tec | | Posted: | Apr 6, 2021 10:00 | | Subject: | Re: New Packing Dimensions Feature | | Viewed: | 49 times | | Topic: | Catalog | |
|
| Ok I tested it for a bit. I added 20 things, bricks from disparate themes, even
a power transformator id 70928.
I think the new page is good. I can add stud- and packing-dimensions at the same
time. There is some error checking on our measures, preventing blunders. Zero
is allowed, we can use that with multiple meanings, better to give us guidance
maybe?
We disperately need the search engine now.
I spent hundreds of clicks just to find parts needing a caliper job. I won't
do that again (note: I'm not seller so can't fiddle with that famous
flag)
|
|
| Author: | calsbricks | | Posted: | Apr 6, 2021 09:57 | | Subject: | Re: New Packing Dimensions Feature | | Viewed: | 63 times | | Topic: | Catalog | |
|
| In Catalog, jennnifer writes:
| | In Catalog, tec writes:
| | My friend here likes this post
|
That's a beauty! I definitely need one of those.
Jen
|
Or you might want one of these 
|
|
|
| Author: | Vosblokjes | | Posted: | Apr 6, 2021 09:53 | | Subject: | Re: New Packing Dimensions Feature | | Viewed: | 51 times | | Topic: | Catalog | |
|
| In Catalog, axaday writes:
| | Good progress. The big splash will be when we can search our inventory for pieces
missing packing dimensions.
In Catalog, Admin_Russell writes:
| | We are pleased to announce that a major new feature was deployed to the catalog
today - Packing Dimensions!
We started a Packaging Dimensions Topic in the Forum in the Fall of 2017 so that
members could input dimensions to help Instant Checkout work properly. It was
only supposed to be a temporary solution, and it took a lot of time and dedication
for both contributors and admins to handle each request manually.
Now there is much better way - just input the data like you would any other catalog
data. Notice the upgrade to the Change Item form:
https://www.bricklink.com/catalogReq.asp?itemType=P
The first thing, though, that we want to tell you about this new feature is that
it's only a start. This is actually just phase 1 out of 3 phases. We did
it this way so we could get the basic functionality opened up as soon as possible.
This means that the Add Item form does not have Packing Dimensions input fields,
and we haven't touched the seller interface either which still shows millimeters
and only allows the upload of custom dimensions.
We are also a bit behind on the new Help Page:
https://www.bricklink.com/help.asp?helpID=2510
There are 4 areas we still need to tackle with the Help Page: Minifigures, Gear,
Books, and Catalogs. Those sections will be filled out over the next few days.
If you could please hold off on uploading dimensions for those Item Types until
the Help Pages are finished, it would be appreciated.
As you may have noticed, we changed the name from Packaging Dimensions to Packing
Dimensions. Let us know what you think and of course report any bugs. And there
is no need to post in the Packaging Dimensions Topic any more. We'll keep
it there for a while in case something happens to our new system, but when we
wrap up with phase 3, we will officially decommission that part of the Forum.
|
|
All, please note that the dimensions you fill in are CM (not MM), I now see very
large items coming up.
https://www.bricklink.com/v2/catalog/catalogitem.page?P=87079pb912#T=C&C=110
for example. It is a 2x4 tile, but now has dimensions "Pack. Dim.: 16 x 32 x
3 cm"
|
|
| Author: | Brick.Door | | Posted: | Apr 6, 2021 09:29 | | Subject: | Re: New Packing Dimensions Feature | | Viewed: | 53 times | | Topic: | Catalog | |
|
| How will this be used? Will we be able to set up a shipping method that is only
allowed if all pieces are under a certain thickness? (i.i USPS large envelope/flat)
So the checkout would need to find the smallest of the three dimensions for each
element in the cart, and make sure it is below the threshold.
Or is it just to better approximate the total volume of the order?
|
| Author: | jennnifer | | Posted: | Apr 6, 2021 09:10 | | Subject: | Re: New Packing Dimensions Feature | | Viewed: | 51 times | | Topic: | Catalog | |
|
| In Catalog, tec writes:
| | My friend here likes this post
|
That's a beauty! I definitely need one of those.
Jen
|
|
| Author: | axaday | | Posted: | Apr 6, 2021 07:42 | | Subject: | Re: Inventory Change Request for Set 9794-3 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| | I would guess
[p=6048]
is in fact
* | | 6048b Arm Piece with Pin, 2 Fingers and Finger Grooves
Parts: Arm |
|
The inventory has been pending for some time, but I believe I remember checking
that. I will check again this evening.
| | ----------------
And did your set really come with
?
That would be very unusal for a set from 2004. Maybe it is a later copy, but
then I would expect it to be the 2005 version.
|
I will double check that for you also. But you might note that the 2004 and
2005 sets were both added to the catalog by me. This inventory for the 2004
set was built from the same 2004 set I bought to create the set listing in the
first place.
|
|
| Author: | Turez | | Posted: | Apr 6, 2021 07:08 | | Subject: | Re: Inventory Change Request for Set 9794-3 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Change 2 Part White {4032 Plate, Round 2 x 2 with Axle Hole to 4032b Plate, Round 2 x 2 with Axle Hole (x Shape)}
Comments from Submitter:
Sorting my set out, I found this error in the inventory build.
|
I would guess
[p=6048]
is in fact
* | | 6048b Arm Piece with Pin, 2 Fingers and Finger Grooves
Parts: Arm |
----------------
And did your set really come with
?
That would be very unusal for a set from 2004. Maybe it is a later copy, but
then I would expect it to be the 2005 version.
|
|
| Author: | tec | | Posted: | Apr 6, 2021 07:07 | | Subject: | Re: New Packing Dimensions Feature | | Viewed: | 70 times | | Topic: | Catalog | |
|
| | My friend here likes this post |
|
|
| Author: | axaday | | Posted: | Apr 6, 2021 06:01 | | Subject: | Re: New Packing Dimensions Feature | | Viewed: | 56 times | | Topic: | Catalog | |
|
| Good progress. The big splash will be when we can search our inventory for pieces
missing packing dimensions.
In Catalog, Admin_Russell writes:
| | We are pleased to announce that a major new feature was deployed to the catalog
today - Packing Dimensions!
We started a Packaging Dimensions Topic in the Forum in the Fall of 2017 so that
members could input dimensions to help Instant Checkout work properly. It was
only supposed to be a temporary solution, and it took a lot of time and dedication
for both contributors and admins to handle each request manually.
Now there is much better way - just input the data like you would any other catalog
data. Notice the upgrade to the Change Item form:
https://www.bricklink.com/catalogReq.asp?itemType=P
The first thing, though, that we want to tell you about this new feature is that
it's only a start. This is actually just phase 1 out of 3 phases. We did
it this way so we could get the basic functionality opened up as soon as possible.
This means that the Add Item form does not have Packing Dimensions input fields,
and we haven't touched the seller interface either which still shows millimeters
and only allows the upload of custom dimensions.
We are also a bit behind on the new Help Page:
https://www.bricklink.com/help.asp?helpID=2510
There are 4 areas we still need to tackle with the Help Page: Minifigures, Gear,
Books, and Catalogs. Those sections will be filled out over the next few days.
If you could please hold off on uploading dimensions for those Item Types until
the Help Pages are finished, it would be appreciated.
As you may have noticed, we changed the name from Packaging Dimensions to Packing
Dimensions. Let us know what you think and of course report any bugs. And there
is no need to post in the Packaging Dimensions Topic any more. We'll keep
it there for a while in case something happens to our new system, but when we
wrap up with phase 3, we will officially decommission that part of the Forum.
|
|
|
| Author: | Mr_Rofl | | Posted: | Apr 6, 2021 04:06 | | Subject: | Re: New Packing Dimensions Feature | | Viewed: | 58 times | | Topic: | Catalog | |
|
| Finally!
A few questions about this feature.
Are the dimensions also available in the API? Or do we need to scrape the from
the different pages?
Does IC still use the 0 and ? as 0 (zero)thickness or will this be an manual
invoice type only?
In Catalog, Admin_Russell writes:
| | We are pleased to announce that a major new feature was deployed to the catalog
today - Packing Dimensions!
We started a Packaging Dimensions Topic in the Forum in the Fall of 2017 so that
members could input dimensions to help Instant Checkout work properly. It was
only supposed to be a temporary solution, and it took a lot of time and dedication
for both contributors and admins to handle each request manually.
Now there is much better way - just input the data like you would any other catalog
data. Notice the upgrade to the Change Item form:
https://www.bricklink.com/catalogReq.asp?itemType=P
The first thing, though, that we want to tell you about this new feature is that
it's only a start. This is actually just phase 1 out of 3 phases. We did
it this way so we could get the basic functionality opened up as soon as possible.
This means that the Add Item form does not have Packing Dimensions input fields,
and we haven't touched the seller interface either which still shows millimeters
and only allows the upload of custom dimensions.
We are also a bit behind on the new Help Page:
https://www.bricklink.com/help.asp?helpID=2510
There are 4 areas we still need to tackle with the Help Page: Minifigures, Gear,
Books, and Catalogs. Those sections will be filled out over the next few days.
If you could please hold off on uploading dimensions for those Item Types until
the Help Pages are finished, it would be appreciated.
As you may have noticed, we changed the name from Packaging Dimensions to Packing
Dimensions. Let us know what you think and of course report any bugs. And there
is no need to post in the Packaging Dimensions Topic any more. We'll keep
it there for a while in case something happens to our new system, but when we
wrap up with phase 3, we will officially decommission that part of the Forum.
|
|
|
| Author: | yorbrick | | Posted: | Apr 6, 2021 03:59 | | Subject: | Re: New Packing Dimensions Feature | | Viewed: | 52 times | | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| | In Catalog, yorbrick writes:
| | Just to note, you have snipped the image starting with the 2x4 brick but not
included its dimensions. I got confused with the first set of dimensions x, y
and z until I realised they are for the slope and not the brick.
|
Sorry about that. Here is another screenshot:
|
There is also a typo on the hell page for the flattened tractor box. It should
be 0.2cm not 0.02cm.
|
|
| Author: | DanielBuyBricks | | Posted: | Apr 6, 2021 03:55 | | Subject: | Inventory Change Request for Set 8987-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part {Flat Silver to Pearl Light Gray} 64308 Bionicle Weapon Vapor Trident
Comments from Submitter:
Color should be Pearl Light Gray and NOT Flat Silver. All pieces with silver from set on right side, and an assortment of Flat Silver pieces on left side for verification.
https://imgur.com/0jUEwM7
|
|
|
| Author: | yorbrick | | Posted: | Apr 6, 2021 03:16 | | Subject: | Re: New Packing Dimensions Feature | | Viewed: | 49 times | | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| | We are pleased to announce that a major new feature was deployed to the catalog
today - Packing Dimensions!
We started a Packaging Dimensions Topic in the Forum in the Fall of 2017 so that
members could input dimensions to help Instant Checkout work properly. It was
only supposed to be a temporary solution, and it took a lot of time and dedication
for both contributors and admins to handle each request manually.
Now there is much better way - just input the data like you would any other catalog
data. Notice the upgrade to the Change Item form:
https://www.bricklink.com/catalogReq.asp?itemType=P
The first thing, though, that we want to tell you about this new feature is that
it's only a start. This is actually just phase 1 out of 3 phases. We did
it this way so we could get the basic functionality opened up as soon as possible.
This means that the Add Item form does not have Packing Dimensions input fields,
and we haven't touched the seller interface either which still shows millimeters
and only allows the upload of custom dimensions.
We are also a bit behind on the new Help Page:
https://www.bricklink.com/help.asp?helpID=2510
There are 4 areas we still need to tackle with the Help Page: Minifigures, Gear,
Books, and Catalogs. Those sections will be filled out over the next few days.
If you could please hold off on uploading dimensions for those Item Types until
the Help Pages are finished, it would be appreciated.
As you may have noticed, we changed the name from Packaging Dimensions to Packing
Dimensions. Let us know what you think and of course report any bugs. And there
is no need to post in the Packaging Dimensions Topic any more. We'll keep
it there for a while in case something happens to our new system, but when we
wrap up with phase 3, we will officially decommission that part of the Forum.
|
Just to note, you have snipped the image starting with the 2x4 brick but not
included its dimensions. I got confused with the first set of dimensions x, y
and z until I realised they are for the slope and not the brick.
|
|
|
| Author: | Admin_Russell | | Posted: | Apr 6, 2021 01:30 | | Subject: | New Packing Dimensions Feature | | Viewed: | 321 times | | Topic: | Catalog | | Status: | Open | |
|
|
BrickLink
ID CardAdmin_Russell
|
Location:  USA, California |
| Member Since |
Contact |
Type |
Status |
| May 9, 2017 |
 |
Admin |
|
|
| BrickLink Administrator |
|
| We are pleased to announce that a major new feature was deployed to the catalog
today - Packing Dimensions!
We started a Packaging Dimensions Topic in the Forum in the Fall of 2017 so that
members could input dimensions to help Instant Checkout work properly. It was
only supposed to be a temporary solution, and it took a lot of time and dedication
for both contributors and admins to handle each request manually.
Now there is much better way - just input the data like you would any other catalog
data. Notice the upgrade to the Change Item form:
https://www.bricklink.com/catalogReq.asp?itemType=P
The first thing, though, that we want to tell you about this new feature is that
it's only a start. This is actually just phase 1 out of 3 phases. We did
it this way so we could get the basic functionality opened up as soon as possible.
This means that the Add Item form does not have Packing Dimensions input fields,
and we haven't touched the seller interface either which still shows millimeters
and only allows the upload of custom dimensions.
We are also a bit behind on the new Help Page:
https://www.bricklink.com/help.asp?helpID=2510
There are 4 areas we still need to tackle with the Help Page: Minifigures, Gear,
Books, and Catalogs. Those sections will be filled out over the next few days.
If you could please hold off on uploading dimensions for those Item Types until
the Help Pages are finished, it would be appreciated.
As you may have noticed, we changed the name from Packaging Dimensions to Packing
Dimensions. Let us know what you think and of course report any bugs. And there
is no need to post in the Packaging Dimensions Topic any more. We'll keep
it there for a while in case something happens to our new system, but when we
wrap up with phase 3, we will officially decommission that part of the Forum.
|
|
|
| Author: | samsam2 | | Posted: | Apr 6, 2021 00:43 | | Subject: | Re: Inventory Change Request for Set 70314-1 | | Viewed: | 14 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, samsam2 writes:
| | Please make changes to the following inventory:
* Change 4 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
sealed set unboxing Flickr https://www.flickr.com/photos/98579374@N03/albums/72157665707429491
|
|
|
|
| Author: | samsam2 | | Posted: | Apr 6, 2021 00:42 | | Subject: | Inventory Change Request for Set 70314-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
sealed set unboxing Flickr https://www.flickr.com/photos/98579374@N03/albums/72157665707429491
|
|
| Author: | randyf | | Posted: | Apr 6, 2021 00:32 | | Subject: | Inventory Change Request for Set 8089-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Light Bluish Gray {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
|
| Author: | samsam2 | | Posted: | Apr 6, 2021 00:28 | | Subject: | Re: Inventory Change Request for Set 41577-1 | | Viewed: | 12 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, samsam2 writes:
| | Please make changes to the following inventory:
* Change 1 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
sealed set, picture to follow
|
|
|
|
| Author: | samsam2 | | Posted: | Apr 6, 2021 00:25 | | Subject: | Inventory Change Request for Set 41577-1 | | Viewed: | 13 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
sealed set, picture to follow
|
|
| Author: | randyf | | Posted: | Apr 6, 2021 00:12 | | Subject: | Inventory Change Request for Set 3557-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
|
| Author: | randyf | | Posted: | Apr 6, 2021 00:02 | | Subject: | Inventory Change Request for Set 3558-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
|
| Author: | samsam2 | | Posted: | Apr 5, 2021 23:57 | | Subject: | Re: Inventory Change Request for Set 41510-1 | | Viewed: | 12 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, samsam2 writes:
| | Please make changes to the following inventory:
* Change 1 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 1 Part Black {44567 Hinge Plate 1 x 2 Locking with 1 Finger on Side (Undetermined Type) to 44567a Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove}
* Change 2 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
Comments from Submitter:
sealed set, picture to follow
|
|
|
|
| Author: | samsam2 | | Posted: | Apr 5, 2021 23:55 | | Subject: | Inventory Change Request for Set 41510-1 | | Viewed: | 13 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 1 Part Black {44567 Hinge Plate 1 x 2 Locking with 1 Finger on Side (Undetermined Type) to 44567a Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove}
* Change 2 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
Comments from Submitter:
sealed set, picture to follow
|
|
| Author: | randyf | | Posted: | Apr 5, 2021 23:29 | | Subject: | Re: Inventory Change Request for Set 3807-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| | In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Change {1 to 2} Part Trans-Clear x165c05 Electric, Fiber Optics Cable 5L
Comments from Submitter:
Sealed set, pic to follow. This correction is not really "correct". I guess the instructions are on the CD-Rom, but this inventory (and 3808 too, I'll bet) is way over on part count because the extras are not broken out.
|
According to the official LEGO data, here are the parts that are over by 1x in
the inventory and should be extras:
I am going to go through the instructions to see if it matches up.
|
I was able to verify according to the instructions that the parts listed above
are each over by one.
How many of each of the above did you get in your set?
|
|
| Author: | samsam2 | | Posted: | Apr 5, 2021 23:29 | | Subject: | Re: Inventory Change Request for Set 41516-1 | | Viewed: | 11 times | | Topic: | Inventories Requests | |
|
| Two pictures of sealed set
In Inventories Requests, samsam2 writes:
| | Please make changes to the following inventory:
|
|
|
|
| Author: | samsam2 | | Posted: | Apr 5, 2021 23:23 | | Subject: | Inventory Change Request for Set 41516-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 4 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth without Bottom Groove}
Comments from Submitter:
sealed set.
|
|
| Author: | samsam2 | | Posted: | Apr 5, 2021 21:51 | | Subject: | Inventory Change Request for Set 10215-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 17 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301a Hinge Plate 1 x 2 Locking with 1 Finger On End with Bottom Groove}
Comments from Submitter:
pic to follow.
|
|
| Author: | randyf | | Posted: | Apr 5, 2021 20:55 | | Subject: | Inventory Change Request for Set 6746-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628b Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Squared Pin Hole}
* Change 2 Part Black {2412 Tile, Modified 1 x 2 Grille (Undetermined Type) to 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip}
Comments from Submitter:
Member go4bob confirmed these variants from the sealed set used to submit the inventory change requests here: https://www.bricklink.com/message.asp?ID=1263137
|
|
| Author: | axaday | | Posted: | Apr 5, 2021 20:44 | | Subject: | Inventory Change Request for Set 9794-3 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part White {4032 Plate, Round 2 x 2 with Axle Hole to 4032b Plate, Round 2 x 2 with Axle Hole (x Shape)}
Comments from Submitter:
Sorting my set out, I found this error in the inventory build.
|
|
| Author: | Stuart9 | | Posted: | Apr 5, 2021 18:44 | | Subject: | Re: What color is this gray? | | Viewed: | 28 times | | Topic: | Colors | |
|
| If you find any 2 x 4's in that shade of grey, let me know.
In Colors, gunga writes:
| | In a large box of loose LEGO, I came across several light gray pieces that I
can't identify the color of. They are from set 41154 and the only gray listed
in the inventory is LBG. The pieces in question are the 1x1 bricks as well as
the 1x2x5 bricks. For reference, the arch, 1x4, and 2x4 are light bluish gray.
The liftarm is very light bluish gray.
I know there is a variance in the light bluish gray, but this is a pretty dramatic
shade difference. And they ALL have the same shade, every 1x1 and 1x2x5. They
are LEGO pieces as I checked the studs and the logo is present.
Any ideas? Or have I overlooked something simple?
|
|
|
| Author: | MrPetovan | | Posted: | Apr 5, 2021 18:30 | | Subject: | Re: What color is this gray? | | Viewed: | 28 times | | Topic: | Colors | |
|
| You should try to contact LEGO to get these replacement parts!
In Colors, Turez writes:
| | In Colors, gunga writes:
| | Normally I would agree with you about being a quality issue. There have been
some instances where it's almost impossible to tell a 'faded' LBG
from a old light gray.
But you can tell the color difference in these parts from 10 feet away in bad
light. Add in the fact that it's two different molds in the same set, and
they have the exact same color shade... maybe a wrong batch of color mixing in
the molding process?
|
I agree that it was probably a wrong batch of color mixing, but I would still
call this a quality issue - just a different kind of quality issue than the "normal"
color variation.
Btw. here is one more discussion about that:
https://www.bricklink.com/messageThread.asp?ID=262307&nID=1174163
Looks like about one year ago TLG was aware of the issue and added replacement
parts to some sets.
|
|
|
| Author: | Turez | | Posted: | Apr 5, 2021 17:31 | | Subject: | Re: What color is this gray? | | Viewed: | 33 times | | Topic: | Colors | |
|
| In Colors, gunga writes:
| | Normally I would agree with you about being a quality issue. There have been
some instances where it's almost impossible to tell a 'faded' LBG
from a old light gray.
But you can tell the color difference in these parts from 10 feet away in bad
light. Add in the fact that it's two different molds in the same set, and
they have the exact same color shade... maybe a wrong batch of color mixing in
the molding process?
|
I agree that it was probably a wrong batch of color mixing, but I would still
call this a quality issue - just a different kind of quality issue than the "normal"
color variation.
Btw. here is one more discussion about that:
https://www.bricklink.com/messageThread.asp?ID=262307&nID=1174163
Looks like about one year ago TLG was aware of the issue and added replacement
parts to some sets.
|
|
| Author: | axaday | | Posted: | Apr 5, 2021 16:35 | | Subject: | Inventory Change Request for Set 8487-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig crs073 Sarge (8487)
* Delete 2 Part 3795 Dark Bluish Gray Plate 2 x 6
* Delete 1 Part 3020 Sand Green Plate 2 x 4
* Delete 1 Part 3023 Medium Blue Plate 1 x 2
* Delete 1 Part 3022 Black Plate 2 x 2
* Delete 2 Part 2436 Sand Green Bracket 1 x 2 - 1 x 4
* Delete 1 Part 2431pb161 Sand Green Tile 1 x 4 with White Line with Black Curved Border Pattern
* Delete 2 Part 3020 Black Plate 2 x 4
* Delete 1 Part 60212 Sand Green Vehicle, Mudguard 2 x 4 with Arch Studded with Hole
* Delete 2 Part 3004pb103 Sand Green Brick 1 x 2 with Army Emblem on Dark Tan Background Pattern
* Delete 1 Part 93274 Sand Green Bracket 1 x 2 - 2 x 4
* Delete 2 Part 92280 Sand Green Plate, Modified 1 x 2 with Clip on Top
* Delete 1 Part 4528 Black Minifigure, Utensil Frying Pan
* Delete 1 Part 3069b Black Tile 1 x 2 with Groove
* Delete 2 Part 32028 Sand Green Plate, Modified 1 x 2 with Door Rail
* Delete 1 Part 3069bpb163 Sand Green Tile 1 x 2 with Groove with Black Grille Lines Thin with Light Bluish Gray Outline Pattern
* Delete 1 Part 4284 Dark Tan Windscreen 2 x 4 x 2 Inverted
* Delete 4 Part 3004 Dark Tan Brick 1 x 2
* Delete 2 Part 3678bpb029 Dark Tan Slope 65 2 x 2 x 2 with Bottom Tube with Brown Eye on White Background Rectangle Pattern
* Delete 1 Part 6179 Dark Tan Tile, Modified 4 x 4 with Studs on Edge
* Delete 2 Part 32028 Dark Tan Plate, Modified 1 x 2 with Door Rail
* Delete 4 Part 4624 Light Bluish Gray Wheel 8mm D. x 6mm
* Delete 4 Part 87414 Black Tire & Tread 15mm D. x 6mm Offset Tread Small - Band Around Center of Tread
* Change {3 to 1} Part Black 6157 Plate, Modified 2 x 2 with Wheels Holder Wide and Hole
* Change {6 to 4} Part Trans-Red 4073 Plate, Round 1 x 1
* Change {4 to 2} Part Trans-Clear 4073 Plate, Round 1 x 1
|
|
| Author: | sb87 | | Posted: | Apr 5, 2021 15:46 | | Subject: | Inventory Change Request for Set 6542-1 | | Viewed: | 186 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {10 to 9} Part Light Gray 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip
* Change {2 to 1} Part Red 3666 Plate 1 x 6
Comments from Submitter:
I have carefully studied the instructions for this set, and disassembled a built version, and believe that these are the correct quantities for these 2 pieces. Other websites (Brickset.com/Rebrickable.com/Peeron.com) also list these quantities, with the caveat that 1 of the originally 2 1x6 red plates may have been provided as an extra. I can't confirm that, but I can only find 1 in the instructions & build)
|
|
| Author: | gunga | | Posted: | Apr 5, 2021 15:45 | | Subject: | Re: What color is this gray? | | Viewed: | 41 times | | Topic: | Colors | |
|
| Normally I would agree with you about being a quality issue. There have been
some instances where it's almost impossible to tell a 'faded' LBG
from a old light gray.
But you can tell the color difference in these parts from 10 feet away in bad
light. Add in the fact that it's two different molds in the same set, and
they have the exact same color shade... maybe a wrong batch of color mixing in
the molding process?
|
|
| Author: | axaday | | Posted: | Apr 5, 2021 15:21 | | Subject: | Inventory Change Request for Set 9485-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig crs070 Raoul ÇaRoule (9485)
* Delete 1 Part 3034 Tan Plate 2 x 8
* Delete 2 Part 6157 Black Plate, Modified 2 x 2 with Wheels Holder Wide and Hole
* Delete 6 Part 3022 Dark Bluish Gray Plate 2 x 2
* Delete 8 Part 4073 Yellow Plate, Round 1 x 1
* Delete 1 Part 60212 Red Vehicle, Mudguard 2 x 4 with Arch Studded with Hole
* Delete 2 Part 3024 Blue Plate 1 x 1
* Delete 1 Part 93274 Blue Bracket 1 x 2 - 2 x 4
* Delete 2 Part 54200 Trans-Red Slope 30 1 x 1 x 2/3
* Delete 2 Part 63868 Red Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
* Delete 2 Part 3023 Dark Azure Plate 1 x 2
* Delete 1 Part 2431pb208 Blue Tile 1 x 4 with 'WORLD GRAND PRIX' and French Flag Pattern
* Delete 1 Part 87079pb053L Blue Tile 2 x 4 with 'WGP 06' and 'allinol' Pattern Model Left Side
* Delete 1 Part 87079pb053R Blue Tile 2 x 4 with 'WGP 06' and 'allinol' Pattern Model Right Side
* Delete 1 Part 93591pb10 Blue Wedge 6 x 4 x 1 1/3 with 4 x 4 Base with Blue Eyes, Windows and Red and White Pattern
* Delete 1 Part 98835pb002 Dark Azure Vehicle, Mudguard 3 x 4 x 1 2/3 Curved Front with Headlights, 'GRC' and Smile Pattern (Raoul CaRoule) (9485)
* Delete 2 Part 30414 White Brick, Modified 1 x 4 with 4 Studs on 1 Side
* Delete 2 Part 3020 Blue Plate 2 x 4
* Delete 1 Part 98834pb01a Red Vehicle Spoiler 2 x 4 with Bar Handle with 'WORLD GRAND PRIX' Pattern
* Delete 4 Part 4624 White Wheel 8mm D. x 6mm
* Delete 4 Part 87414 Black Tire & Tread 15mm D. x 6mm Offset Tread Small - Band Around Center of Tread
|
|
| Author: | tan1mill | | Posted: | Apr 5, 2021 15:09 | | Subject: | Re: What color is this gray? | | Viewed: | 33 times | | Topic: | Colors | |
|
| In Colors, gunga writes:
| | In a large box of loose LEGO, I came across several light gray pieces that I
can't identify the color of. They are from set 41154 and the only gray listed
in the inventory is LBG. The pieces in question are the 1x1 bricks as well as
the 1x2x5 bricks. For reference, the arch, 1x4, and 2x4 are light bluish gray.
The liftarm is very light bluish gray.
I know there is a variance in the light bluish gray, but this is a pretty dramatic
shade difference. And they ALL have the same shade, every 1x1 and 1x2x5. They
are LEGO pieces as I checked the studs and the logo is present.
Any ideas? Or have I overlooked something simple?
|
I've noticed this as well. There appears to be a shade between Light Bluish
Gray and the old Light Gray. It's clearly an "Off Color Gray" as I call
them, and know they are meant to be Light Bluish Gray because for some parts,
that's the only gray it was ever produced in. Sometimes I have a REALLY
hard time deciphering if a part is actually Light Gray or LBG. In that case,
I don't bother listing them for sale because they don't meet my personal
level of sale quality.
|
|
| Author: | Turez | | Posted: | Apr 5, 2021 14:56 | | Subject: | Re: What color is this gray? | | Viewed: | 43 times | | Topic: | Colors | |
|
| In Colors, gunga writes:
| | In a large box of loose LEGO, I came across several light gray pieces that I
can't identify the color of. They are from set 41154 and the only gray listed
in the inventory is LBG. The pieces in question are the 1x1 bricks as well as
the 1x2x5 bricks. For reference, the arch, 1x4, and 2x4 are light bluish gray.
The liftarm is very light bluish gray.
I know there is a variance in the light bluish gray, but this is a pretty dramatic
shade difference. And they ALL have the same shade, every 1x1 and 1x2x5. They
are LEGO pieces as I checked the studs and the logo is present.
Any ideas? Or have I overlooked something simple?
|
Here is a similar case with 1x1 bricks in "too light bluish gray": https://www.bricklink.com/messageThread.asp?ID=264511&nID=1183633
It is obviously a quality issue.
|
|
| Author: | tons_of_bricks | | Posted: | Apr 5, 2021 14:34 | | Subject: | Re: What color is this gray? | | Viewed: | 31 times | | Topic: | Colors | |
|
| I too, have seen this difference in shade in some newer sets that contain Light
Bluish Gray.
|
| Author: | gunga | | Posted: | Apr 5, 2021 14:25 | | Subject: | Re: What color is this gray? | | Viewed: | 32 times | | Topic: | Colors | |
|
| I am positive it is from 41154. The castle wasn't completely disassembled
and the light bright blue window only appears in that set. There were no older
regular light gray pieces in the lot.
|
|
| Author: | Brick.Door | | Posted: | Apr 5, 2021 14:17 | | Subject: | Re: What color is this gray? | | Viewed: | 39 times | | Topic: | Colors | |
|
| In Colors, gunga writes:
| | In a large box of loose LEGO, I came across several light gray pieces that I
can't identify the color of. They are from set 41154 and the only gray listed
in the inventory is LBG. The pieces in question are the 1x1 bricks as well as
the 1x2x5 bricks. For reference, the arch, 1x4, and 2x4 are light bluish gray.
The liftarm is very light bluish gray.
I know there is a variance in the light bluish gray, but this is a pretty dramatic
shade difference. And they ALL have the same shade, every 1x1 and 1x2x5. They
are LEGO pieces as I checked the studs and the logo is present.
Any ideas? Or have I overlooked something simple?
|
If they were in a large loose box are you sure they came from 41154? Were there
any older (light gray) pieces in the box? The previous owner may have been playing
and took it apart and put it back together with some older bricks.
However, the fact that it is only certain elements (and all of those elements)
leads me to believe it was a bad batch produced this way by LEGO. Since it is
a recent set I wouldn't expect any fading or discoloration this quickly.
|
|
| Author: | gunga | | Posted: | Apr 5, 2021 13:57 | | Subject: | What color is this gray? | | Viewed: | 154 times | | Topic: | Colors | | Status: | Open | |
|
| In a large box of loose LEGO, I came across several light gray pieces that I
can't identify the color of. They are from set 41154 and the only gray listed
in the inventory is LBG. The pieces in question are the 1x1 bricks as well as
the 1x2x5 bricks. For reference, the arch, 1x4, and 2x4 are light bluish gray.
The liftarm is very light bluish gray.
I know there is a variance in the light bluish gray, but this is a pretty dramatic
shade difference. And they ALL have the same shade, every 1x1 and 1x2x5. They
are LEGO pieces as I checked the studs and the logo is present.
Any ideas? Or have I overlooked something simple?
|
|
|
| Author: | axaday | | Posted: | Apr 5, 2021 13:42 | | Subject: | Inventory Change Request for Set 9485-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig crs069 Max Schnell (9485)
* Delete 2 Part 3023 Blue Plate 1 x 2
* Delete 4 Part 3710 Dark Bluish Gray Plate 1 x 4
* Delete 2 Part 4081b Black Plate, Modified 1 x 1 with Light Attachment - Thick Ring
* Delete 1 Part 3795 Green Plate 2 x 6
* Delete 4 Part 2420 Red Plate 2 x 2 Corner
* Delete 1 Part 60212 Dark Bluish Gray Vehicle, Mudguard 2 x 4 with Arch Studded with Hole
* Delete 1 Part 87079pb054L Dark Bluish Gray Tile 2 x 4 with 'WGP 4' and 'WORLD GRAND PRIX' Pattern Model Left Side
* Delete 1 Part 87079pb054R Dark Bluish Gray Tile 2 x 4 with 'WGP 4' and 'WORLD GRAND PRIX' Pattern Model Right Side
* Delete 1 Part 98835pb003 Dark Bluish Gray Vehicle, Mudguard 3 x 4 x 1 2/3 Curved Front with Headlights, Grille and Smile Pattern (Max Schnell) (9485)
* Delete 1 Part 93591pb11 Dark Bluish Gray Wedge 6 x 4 x 1 1/3 with 4 x 4 Base with Blue Eyes, Windows and Black, Red and Yellow Pattern
* Delete 2 Part 2436 White Bracket 1 x 2 - 1 x 4 (match ID 3)
* Delete 4 Part 3794a Yellow Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper) (match ID 2)
* Delete 2 Part 2420 Dark Bluish Gray Plate 2 x 2 Corner
* Delete 2 Part 3023 Trans-Red Plate 1 x 2
* Delete 1 Part 93274 Dark Bluish Gray Bracket 1 x 2 - 2 x 4
* Delete 2 Part 63868 Light Bluish Gray Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
* Delete 1 Part 98834pb01a Black Vehicle Spoiler 2 x 4 with Bar Handle with 'WORLD GRAND PRIX' Pattern
* Delete 4 Part 50945 Black Tire & Tread 14mm D. x 6mm Solid Smooth
* Delete 4 Part 93595 Light Bluish Gray Wheel 11mm D. x 6mm with 8 'Y' Spokes
* Change {4 to 2} Part Black 6157 Plate, Modified 2 x 2 with Wheels Holder Wide and Hole
* Change {2 to 1} Part Tan 3034 Plate 2 x 8
* Change {12 to 8} Part Black 4073 Plate, Round 1 x 1
* Change {6 to 4} Part Dark Bluish Gray 61409 Slope 18 2 x 1 x 2/3 with 4 Slots
|
|
|
|
| Author: | axaday | | Posted: | Apr 5, 2021 13:06 | | Subject: | Inventory Change Request for Set 8487-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig crs072 Fillmore (8487)
* Delete 1 Part 2420 Dark Bluish Gray Plate 2 x 2 Corner
* Delete 1 Part 4085d Black Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
* Delete 2 Part 60212 Light Aqua Vehicle, Mudguard 2 x 4 with Arch Studded with Hole
* Delete 2 Part 3001pb083 Light Aqua Brick 2 x 4 with Peace Symbol, Road, and Flowers Pattern
* Delete 1 Part 3009pb151 Light Aqua Brick 1 x 6 with 'PEACE' and Flower Pattern
* Delete 1 Part 3009pb153 Light Aqua Brick 1 x 6 with 'GROOVY', 'LOVE', Rainbow and Flower Pattern
* Delete 1 Part 93273pb001 Light Aqua Slope, Curved 4 x 1 Double with Mouth and '51237' License Plate Pattern (Fillmore)
* Delete 2 Part 3005 Light Aqua Brick 1 x 1
* Delete 2 Part 3003 White Brick 2 x 2
* Delete 2 Part 3710 Light Bluish Gray Plate 1 x 4
* Delete 2 Part 93274 Light Aqua Bracket 1 x 2 - 2 x 4
* Delete 1 Part 93604pb01 Light Aqua Wedge 3 x 4 x 2/3 Triple Curved with Half Open Eyes, Flowers, and Headlights Pattern (Fillmore)
* Delete 1 Part 86208 Dark Bluish Gray Minifigure, Utensil Space Gun / Torch - Without Grooves
* Delete 2 Part 2921 Light Aqua Brick, Modified 1 x 1 with Bar Handle
* Delete 2 Part 3009pb152 Light Bluish Gray Brick 1 x 6 with Recycling Phrases and Stars Pattern
* Delete 1 Part 3794a Light Aqua Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
* Delete 1 Part 2555 Dark Bluish Gray Tile, Modified 1 x 1 with Clip
* Delete 1 Part 3795 Light Aqua Plate 2 x 6
* Delete 4 Part 50945 Black Tire & Tread 14mm D. x 6mm Solid Smooth
* Delete 4 Part 93594 Flat Silver Wheel 11mm D. x 6mm with Smooth Hubcap
* Change {3 to 2} Part Dark Bluish Gray 3034 Plate 2 x 8
* Change {3 to 2} Part Black 3020 Plate 2 x 4
* Change {3 to 1} Part Light Bluish Gray 4600 Plate, Modified 2 x 2 with Wheels Holder
* Change {4 to 1} Part Medium Blue 3023 Plate 1 x 2
* Change {4 to 1} Part Light Aqua 2436 Bracket 1 x 2 - 1 x 4
* Change {3 to 1} Part Black 3022 Plate 2 x 2
* Change {8 to 2} Part Light Bluish Gray 3024 Plate 1 x 1
* Change {4 to 1} Part Light Aqua 93604 Wedge 3 x 4 x 2/3 Triple Curved
* Change {6 to 2} Part Light Aqua 85984 Slope 30 1 x 2 x 2/3
|
|
| Author: | normann1974 | | Posted: | Apr 5, 2021 12:27 | | Subject: | Inventory Change Request for Set 10274-1 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 44861 Dark Bluish Gray Plate, Modified 1 x 2 with Open O Clip on Top (Alternate) (match ID 5)
* Change 2 Part Dark Bluish Gray 92280 Plate, Modified 1 x 2 with Clip on Top {match ID 0 to 5}
* Change {1 to 2} Part Yellow 4073 Plate, Round 1 x 1 (Extra)
Comments from Submitter:
Found in sealed set.
|
|
| Author: | normann1974 | | Posted: | Apr 5, 2021 10:40 | | Subject: | Inventory Change Request for Set 10274-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Red {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Verified in sealed set.
|
|
| Author: | axaday | | Posted: | Apr 5, 2021 05:50 | | Subject: | Inventory Change Request for Set 8487-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig crs074 Lightning McQueen - Radiator Springs, Dark Bluish Gray 1x4 Plates Inside
|
| Author: | jennnifer | | Posted: | Apr 4, 2021 20:24 | | Subject: | Re: Items Moved Today | | Viewed: | 68 times | | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| |
I'm preparing a statement about this current round of changes that will help
explain the decisions that were made.
|
Bump.
|
|
| Author: | axaday | | Posted: | Apr 4, 2021 19:22 | | Subject: | Inventory Change Request for Set 9485-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig crs071 Forklift - Raoul ÇaRoul's Pit Crew (9485)
* Delete 2 Part 4600 Light Bluish Gray Plate, Modified 2 x 2 with Wheels Holder
* Delete 1 Part 4623b Red Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)
* Delete 1 Part 6215 Blue Slope, Curved 3 x 2 x 1 with Four Studs
* Delete 1 Part 3678bpb044 Blue Slope 65 2 x 2 x 2 with Bottom Tube with Green Eyes on White Background and Smile Pattern 1
* Delete 1 Part 2431 Blue Tile 1 x 4
* Delete 1 Part 93274 Red Bracket 1 x 2 - 2 x 4
* Delete 1 Part 44822 Dark Bluish Gray Hinge Tile 1 x 4 Locking Dual 1 Fingers on Top
* Delete 2 Part 44302a Dark Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove
* Delete 3 Part 4085c Black Plate, Modified 1 x 1 with U Clip Thick (Vertical Grip) (match ID 2)
* Delete 3 Part 4085d Black Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip) (Alternate) (match ID 2)
* Delete 2 Part 4528 Black Minifigure, Utensil Frying Pan
* Delete 1 Part 32028 Red Plate, Modified 1 x 2 with Door Rail
* Change {3 to 2} Part Blue 3020 Plate 2 x 4
* Change {5 to 4} Part Red 3021 Plate 2 x 3
* Change {4 to 2} Part Blue 3023 Plate 1 x 2
* Change {8 to 4} Part White 4624 Wheel 8mm D. x 6mm
* Change {8 to 4} Part Black 87414 Tire & Tread 15mm D. x 6mm Offset Tread Small - Band Around Center of Tread
|
|
| Author: | axaday | | Posted: | Apr 4, 2021 18:41 | | Subject: | Inventory Change Request for Set 8487-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig crs065 Lightning McQueen - Radiator Springs
* Delete 3 Part 3023 Yellow Plate 1 x 2
* Delete 1 Part 3795 Blue Plate 2 x 6
* Delete 1 Part 60470 Black Plate, Modified 1 x 2 with 2 U Clips (Horizontal Grip) (match ID 1)
* Delete 1 Part 60470b Black Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip) (Alternate) (match ID 1)
* Delete 1 Part 2431 Red Tile 1 x 4
* Delete 1 Part 48336 Red Plate, Modified 1 x 2 with Bar Handle on Side with Closed Ends
* Delete 1 Part 93590 Red Vehicle, Mudguard 2 x 4 with Headlights and Curved Fenders
* Delete 1 Part 93587pb01 Red Vehicle, Mudguard 3 x 4 x 1 2/3 Curved with Front with Headlights, Grille and 'Rust-eze' Pattern
* Delete 1 Part 93591pb01 Red Wedge 6 x 4 x 1 1/3 with 4 x 4 Base with Blue Eyes, Windows and '95' in White Circle Pattern
* Delete 4 Part 93593 Red Wheel 11mm D. x 6mm with 8 Spokes
* Delete 1 Part 87079pb029R Red Tile 2 x 4 with Lightning Bolt in Half Ellipse and '95' Pattern Model Right Side
* Delete 1 Part 87079pb029L Red Tile 2 x 4 with Lightning Bolt in Half Ellipse and '95' Pattern Model Left Side
* Delete 4 Part 3794a Black Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
* Delete 2 Part 2436 White Bracket 1 x 2 - 1 x 4
* Delete 2 Part 3023 Red Plate 1 x 2
* Change {3 to 2} Part Red 3034 Plate 2 x 8
* Change {5 to 3} Part Black 6157 Plate, Modified 2 x 2 with Wheels Holder Wide and Hole
* Change {9 to 7} Part Dark Bluish Gray 3710 Plate 1 x 4
* Change {8 to 4} Part Black 50945 Tire & Tread 14mm D. x 6mm Solid Smooth
Comments from Submitter:
I have seen precedent for putting different parts in inventory note. This car looks identical to the one in 8200-1, but it looks like the 3710 inside are DBG instead of LBG in this set.
|
|
| Author: | BricksThatStick | | Posted: | Apr 4, 2021 17:42 | | Subject: | Re: Inventory Change Request for Set 40145-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, shiniz writes:
| | In Inventories Requests, shiniz writes:
| | Please make changes to the following inventory:
* Add 2 Part 3004pb222 Blue Brick 1 x 2 with White 'City', Red Car and Black Minifigure Silhouette Pattern (Sticker) - Set 40305 (Counterpart)
* Add 2 Part 3004pb221 Yellow Brick 1 x 2 with White 'Creator', Yellow House with Red Roof and Door on Black Baseplate Pattern (Sticker) - Set 40305 (Counterpart)
* Add 2 Part 3004pb224 Red Brick 1 x 2 with White 'Juniors', White Building with Red Door on Black Baseplate and Minifigure Silhouette Pattern (Sticker) - Set 40305 (Counterpart)
Comments from Submitter:
These parts are included in set 40305-1.
|
But to finish the inventory of set 40145-1, there are 3 pieces left which are
not referenced in Bricklink. These are the photo attachments. Do any of you have
a reference to pass on to me please ? :
- 1 tile with groove (item n° 3068b) white with a red stickers "LEGO" and black
frame;
- 2 bricks 1 x 2 (item n° 3004) medium lavender with stickers "friends";
- 2 bricks 1 x 2 (item n° 3004) green with stickers "Ninjago".
Thanks for your help
|
They have not yet been added to the catalog.
Please see below for further info:
(1) Add the stickered parts to the BrickLink catalog:
https://www.bricklink.com/wantedCatalog.asp?catType=P
Help on adding items to the BrickLink catalog:
https://www.bricklink.com/help.asp?helpID=71
(2) Add images to the BrickLink catalog for the stickered parts:
https://www.bricklink.com/v2/catalog/catalogImageAdd.page?itemType=P
Help on adding images to the BrickLink catalog:
https://www.bricklink.com/help.asp?helpID=87
----------
The following videos are great tutorials for the process:
https://www.bricklink.com/message.asp?ID=1191009
Thanks,
Paul.
|
|
| Author: | axaday | | Posted: | Apr 4, 2021 16:14 | | Subject: | Inventory Change Request for Set 9485-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 3 Part 2436 Red Bracket 1 x 2 - 1 x 4 (match ID 4)
* Delete 3 Part 2436b Red Bracket 1 x 2 - 1 x 4 with Rounded Corners (Alternate) (match ID 4)
* Delete 1 Part 93590 Red Vehicle, Mudguard 2 x 4 with Headlights and Curved Fenders
* Delete 1 Part 2431pb207 Red Tile 1 x 4 with 'KA-CIAO, FRANCESCO!' Pattern
* Delete 2 Part 3710 Yellow Plate 1 x 4
* Delete 4 Part 3794a Light Bluish Gray Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper) (match ID 5)
* Delete 4 Part 3794b Light Bluish Gray Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 5)
* Delete 1 Part 93587pb07 Red Vehicle, Mudguard 3 x 4 x 1 2/3 Curved with Front with Headlights, Thin Smile, Chin Dimple and 'PISTON CUP' Pattern
* Delete 1 Part 93591pb07 Red Wedge 6 x 4 x 1 1/3 with 4 x 4 Base with Blue Eyes on Narrow White Background, Windows and '95' Pattern
* Delete 1 Part 3023 Red Plate 1 x 2
* Delete 1 Part 2431pb165 Red Tile 1 x 4 with 'WORLD GRAND PRIX' Pattern
* Delete 4 Part 93595pb03 Red Wheel 11mm D. x 6mm with 8 'Y' Spokes with Black Outline Pattern
* Delete 1 Part 87079pb031L Red Tile 2 x 4 with Lightning, Exhaust Pipes and Offset '95' Pattern Model Left Side
* Delete 1 Part 87079pb031R Red Tile 2 x 4 with Lightning, Exhaust Pipes and Offset '95' Pattern Model Right Side
* Add 1 Minifig crs068 Lightning McQueen - Red, Piston Cup, Red and Black Wheels (9485)
* Change {3 to 2} Part Tan 3034 Plate 2 x 8
* Change {6 to 4} Part Black 6157 Plate, Modified 2 x 2 with Wheels Holder Wide and Hole
* Change {2 to 1} Part Green 3795 Plate 2 x 6
* Change {7 to 4} Part Blue 3023 Plate 1 x 2
* Change {4 to 2} Part Trans-Red 4073 Plate, Round 1 x 1
* Change {6 to 5} Part Red 3021 Plate 2 x 3
* Change {14 to 12} Part Black 4073 Plate, Round 1 x 1
* Change {8 to 4} Part Black 50945 Tire & Tread 14mm D. x 6mm Solid Smooth
|
|
| Author: | axaday | | Posted: | Apr 4, 2021 15:01 | | Subject: | Inventory Change Request for Set 8487-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 3021 Yellow Plate 2 x 3
* Delete 4 Part 3710 Blue Plate 1 x 4
* Delete 2 Part 2436 Light Bluish Gray Bracket 1 x 2 - 1 x 4
* Delete 2 Part 2431 Medium Blue Tile 1 x 4
* Delete 1 Part 93587pb04 Medium Blue Vehicle, Mudguard 3 x 4 x 1 2/3 Curved with Back with Taillights, Exhaust and '301PCE' License Plate Pattern
* Delete 1 Part 93587pb03 Medium Blue Vehicle, Mudguard 3 x 4 x 1 2/3 Curved with Front with Headlights, Thin Smile and Nose Pattern
* Delete 1 Part 93591pb03 Medium Blue Wedge 6 x 4 x 1 1/3 with 4 x 4 Base with Green Eyes, Windows and Rear Grille Pattern (Sally)
* Delete 1 Part 3031 Medium Blue Plate 4 x 4
* Add 1 Part 50945 Black Tire & Tread 14mm D. x 6mm Solid Smooth (Extra)
* Delete 4 Part 50944 Light Bluish Gray Wheel 11mm D. x 6mm with 5 Spokes
* Add 1 Minifig crs066 Sally Carrera
* Change {4 to 3} Part Dark Bluish Gray 3034 Plate 2 x 8
* Change {7 to 5} Part Black 6157 Plate, Modified 2 x 2 with Wheels Holder Wide and Hole
* Change {6 to 4} Part Medium Blue 3023 Plate 1 x 2
* Change {12 to 8} Part Black 50945 Tire & Tread 14mm D. x 6mm Solid Smooth
Comments from Submitter:
The bag containing Sally, Fillmore, and Sarge had one extra of the smooth tire.
|
|
| Author: | randyf | | Posted: | Apr 4, 2021 12:56 | | Subject: | Re: Inventory Change Request for Set 71738-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, plast_ech writes:
| | Please make changes to the following inventory:
* Change 1 Part Flat Silver {30608 Minifigure, Hair Flat Top with Extended Sides to 25379 Minifigure, Hair Flat Top with Straight Even Sections}
Comments from Submitter:
Part 30608 is apparently no longer in production, having not appeared in a set since 2017. It was effectively replaced with part 25379. Having built set 71738 myself, I can confirm that this set includes the new hair piece and not the old one.
|
The original submitter of the inventory confirmed that he had 25379 in his set
instead of 30608. Request accepted.
Cheers,
Randy
|
|
| Author: | MattiaInge | | Posted: | Apr 4, 2021 12:25 | | Subject: | Inventory Change Request for Set 3432-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 3022 Red Plate 2 x 2 (Extra)
|
| Author: | MattiaInge | | Posted: | Apr 4, 2021 12:18 | | Subject: | Inventory Change Request for Set 3432-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3069b Red Tile 1 x 2 with Groove (Extra)
* Add 1 Part 2736 Light Gray Technic, Axle 1 with Tow Ball (Extra)
* Add 1 Part 43093 Blue Technic, Axle 1 with Pin with Friction Ridges Lengthwise (Extra)
* Add 1 Part 32062 Black Technic, Axle 2 Notched (Extra)
|
|
| Author: | axaday | | Posted: | Apr 4, 2021 12:13 | | Subject: | Inventory Change Request for Set 8200-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig crs065 Lightning McQueen - Radiator Springs
* Delete 4 Part 3794a Black Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
* Delete 1 Part 60470 Black Plate, Modified 1 x 2 with 2 U Clips (Horizontal Grip) (match ID 1)
* Delete 2 Part 6157 Black Plate, Modified 2 x 2 with Wheels Holder Wide and Hole
* Delete 4 Part 50945 Black Tire & Tread 14mm D. x 6mm Solid Smooth
* Delete 1 Part 3795 Blue Plate 2 x 6
* Delete 2 Part 3710 Light Bluish Gray Plate 1 x 4
* Delete 2 Part 3023 Red Plate 1 x 2
* Delete 1 Part 3034 Red Plate 2 x 8
* Delete 1 Part 48336 Red Plate, Modified 1 x 2 with Bar Handle on Side with Closed Ends
* Delete 1 Part 2431 Red Tile 1 x 4
* Delete 1 Part 87079pb029L Red Tile 2 x 4 with Lightning Bolt in Half Ellipse and '95' Pattern Model Left Side
* Delete 1 Part 87079pb029R Red Tile 2 x 4 with Lightning Bolt in Half Ellipse and '95' Pattern Model Right Side
* Delete 1 Part 93590 Red Vehicle, Mudguard 2 x 4 with Headlights and Curved Fenders
* Delete 1 Part 93587pb01 Red Vehicle, Mudguard 3 x 4 x 1 2/3 Curved with Front with Headlights, Grille and 'Rust-eze' Pattern
* Delete 1 Part 93591pb01 Red Wedge 6 x 4 x 1 1/3 with 4 x 4 Base with Blue Eyes, Windows and '95' in White Circle Pattern
* Delete 4 Part 93593 Red Wheel 11mm D. x 6mm with 8 Spokes
* Delete 2 Part 2436 White Bracket 1 x 2 - 1 x 4
* Delete 3 Part 3023 Yellow Plate 1 x 2
|
|
| Author: | Turez | | Posted: | Apr 4, 2021 11:06 | | Subject: | Re: Process for make a new inventories | | Viewed: | 32 times | | Topic: | Inventories | |
|
| In Inventories, shiniz writes:
| | Hello,
I want to take inventory of a new set, freshly released. In this set there are
new parts and new minifigures not referenced in Bricklink. Do you know how to
proceed to carry out this inventory?
Thanks for your help
|
Maybe have a look at this other discussion:
https://www.bricklink.com/messageThread.asp?ID=287498&nID=1263495
|
| Author: | go4bob | | Posted: | Apr 4, 2021 08:26 | | Subject: | Inventory Change Request for Set 6415-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 2447 Trans-Dark Blue Minifigure, Headgear Accessory Visor Standard (Extra)
|
|
| Author: | Stellar | | Posted: | Apr 4, 2021 05:32 | | Subject: | Re: Add tax inclusive/exempt option on refund | | Viewed: | 43 times | | Topic: | Suggestions | |
|
| In Suggestions, qwertyboy writes:
| | In Suggestions, Emporiosa writes:
| | In Suggestions, cosmicray writes:
| | In Suggestions, Emporiosa writes:
| | Had a thought about the previous discussion where it is quite confusing currently
for processing refunds for US states that have collected sales tax. As it stands,
the refund box has us enter an amount, and then below it calculates the amount
that will come from the seller/PayPal, and the amount from the taxes BrickLink
collected, so a seller has to know the rate of tax for the state of the buyer
and also include it in the total.
|
Which is different from the exemption issue. The real important question about
this is, who determines that a buyer is exempt, the seller or BL. From my perspective
it would be BL that processes the buyer's exemption certificate (as it would
cover all sellers shipping to that buyer).
| | Suggestion:
-Beside the box where you enter the refund amount, include a "tax inclusive"
and "tax exclusive" radio button where the seller can select it.
This would allow sellers to not have to know the rate of state for the state
and manually calculate it by selecting "tax exclusive", meaning the calculation
below will take that amount, and ADD tax to the total (not as a % of the total
the seller put in).
|
Seller's will not know, particularly when the tax rate varies by jurisdiction
within a state. Florida has a statewide base rate of 6%, but a county optional
add-on of 0%-1.5%. So the rate may vary depending on the specific address within
the state. The rate can more likely be retrieved by the service that BL is using
to pull up this information.
| | But this also allows what Niek (qwertyboy) had suggested where if you want to
give a higher total amount, you can check tax inclusive so it'll act the
way that it's currently programmed.
|
Nita Rae
|
By tax exclusive, I wasn't referring to any kind of tax exemption. Tax exclusive
when referring to calculators like this means that the total you have entered
does not include the sales tax. This is how sellers want it to operate (based
on discussions), where the amount we enter is tax exclusive, so the calculation
below it will add the tax automatically without the seller having to calculate
it (since we can't easily know what the rates are).
Tax inclusive is for when a seller is doing an amount (usually) above and beyond
just a direct refund of a part. To clarify, how it works right now by default
is this method - tax inclusive. When you enter an amount, the calculator believes
that you already included the sales tax, and it's doing the breakdown of
which part of that refund is sales tax, and what is the amount for the item(s)
itself.
|
... and to make things even more complex - I believe some states have taxes on
shipping as well, and others don't. What if you agree to refund an item from
the order plus the order's shipping cost? BL can't know what part of
the agreed-upon refund amount is for shipping. It will likely refund too much
of its tax collection and not enough from the seller's pocket.
(This is not a hypothetical situation - if we can't fulfill something from
an order and it is the most important or most valuable part, we could agree to
refund part+shipping.)
Niek.
|
In other online marketplace the refund form lets you refund pieces, shipping
or credit...
|
|
| Author: | beaverbrick | | Posted: | Apr 4, 2021 05:11 | | Subject: | Re: New entry??? | | Viewed: | 25 times | | Topic: | Catalog | |
|
| You can submit a request to add the part to the catalog here...
https://www.bricklink.com/wantedCatalog.asp?catType=P
I guess if you're asking how to add it, you're not familiar with adding
parts so some quick help...
Note: this stickered part has left and right sided versions.
Category = Brick, Decorated
Item No = 3009pb238L (I just checked and this is the next available number, L
is for left)
Item Name = I usually copy and paste the name of another 1x6 brick stickered
(with left and right sides)
part (3009pb*), then change the description to suit. Remember to change the set
number at the end of the description.
As soon as the part has been submitted, you should add an image here...
https://www.bricklink.com/v2/catalog/catalogImageAdd.page?itemType=P
Once the part has been approved to the catalog, you can then add it the set's
inventory here...
https://www.bricklink.com/catalogInvChange.asp?itemType=S
Hope this helps
In Catalog, roguemjr writes:
| | To whom it may concern:
Is it possible to create an assembly for the attached 1x6 yellow brick with driver
side sticker from set 5510-1? I see there is another assembly for another sticker
for this part. Or how should I list this part to found by people who may be
looking for it.
Thanks,
roguemjr
|
|
|
| Author: | Greenbutterfly | | Posted: | Apr 4, 2021 04:13 | | Subject: | Re: Wanted list uploads blocked by custom parts | | Viewed: | 32 times | | Topic: | Suggestions | |
|
| In Suggestions, Greenbutterfly writes:
| | I have a very, very large model of a cathedral. I originally designed it in LDD
18 years ago and now updating it in stud.io.
The cathedral has a balcony with railings. I've created a couple of custom
parts for the railings to fit around the columns... the presence of these railings
in my IO file blocks the upload to my wanted list because they are not genuine
parts available through BL.
I'd like to see those parts ignored... or at least an option to do so.
I know there's the workaround of going through the IO file and deleting them
to upload. But my file has over 46000 parts, these custom parts are embedded
several layers deep in multiple sub-sub-sub-models... which means they're
difficult to find because stud.io doesn't have a fully function find-replace
mechanism (I and plenty of others have requested it, and requested that it work
with sub-models as well as main model).
This is still a work in progress, so I'm not really wanting to delete them
because re-instating them is going to be a pain. Plus with the size of the model
stud.io doesn't behave quite as it should anyway because of all the memory
leaks in it (which is going to affect any attempt to copy-paste the file then
delete the custom parts in the copy)...
PS. I'm sure I've requested this before, but for the life of me cannot
find it. stud.io isn't the only thing with memory leaks 
|
For the record, I've found a way around this... but it feels a little clunky.
1. Export from stud.io in Wanted List XML format. This exports only standard
Lego parts.
2. Open the exported XML in a text editor. Select all and copy to the clipboard
or equivalent.
3. In BL, go to "Upload" in the "Want" menu, and select the wanted list from
the drop down.
4. Paste the XML text into the appropriate window and click the button to verify.
5. Proceed through verification as normal.
|
|
| Author: | shiniz | | Posted: | Apr 4, 2021 03:29 | | Subject: | Process for make a new inventories | | Viewed: | 43 times | | Topic: | Inventories | | Status: | Open | |
|
| Hello,
I want to take inventory of a new set, freshly released. In this set there are
new parts and new minifigures not referenced in Bricklink. Do you know how to
proceed to carry out this inventory?
Thanks for your help
|
| Author: | Ddriver | | Posted: | Apr 4, 2021 02:15 | | Subject: | Re: tls095 Lego Employee, Kidsfest 2013 | | Viewed: | 23 times | | Topic: | Catalog | |
|
| I think its good to make a note like:
"The Minifigur is the same as the "Creativity Tour 2014", but with another blister
pack image." 👍
Best regards Daniel & stay healthy.
In Catalog, Turez writes:
| | In Catalog, StormChaser writes:
Maybe it would be better to create a new set entry for that blister pack set?
Like
for example.
|
|
|
| Author: | Ddriver | | Posted: | Apr 4, 2021 02:07 | | Subject: | Re: tls095 Lego Employee, Kidsfest 2013 | | Viewed: | 26 times | | Topic: | Catalog | |
|
| THX a lot for that. 👍
Best regards Daniel & stay healthy.
In Catalog, StormChaser writes:
|
| Author: | roguemjr | | Posted: | Apr 4, 2021 01:46 | | Subject: | New entry??? | | Viewed: | 75 times | | Topic: | Catalog | | Status: | Open | |
|
| To whom it may concern:
Is it possible to create an assembly for the attached 1x6 yellow brick with driver
side sticker from set 5510-1? I see there is another assembly for another sticker
for this part. Or how should I list this part to found by people who may be
looking for it.
Thanks,
roguemjr
|
|
|
| Author: | Vosblokjes | | Posted: | Apr 4, 2021 01:24 | | Subject: | Re: inventory process | | Viewed: | 22 times | | Topic: | Inventories | |
|
| In Inventories, weblectricity writes:
| | Thank you!
2 things I forgot to ask:
1) do I need to provide info for counterparts - which parts are stickered?
|
No, since you will not be adding those to the catalog you don't have to mention
them.
| | 2) if I encounter parts in previously unused colors (2x4 tile in coral) do I
submit them prior to submitting the full set inventory?
|
No, the part is already in the catalog, this new color will be added to the known
color chart after your inventory has been approved.
Regards,
Bas
|
|
| Author: | randyipp | | Posted: | Apr 4, 2021 01:12 | | Subject: | Inventory Change Request for Set 70420-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 28621pb0003 Trans-Neon Green Minifigure, Head Alien Ghost with Yellowish Green Face, Bushy Eyebrows, Angry and Flames in Back Pattern - Vented Stud (Alternate) (match ID 943602)
Comments from Submitter:
31 Sealed sets - 6 sets contained vented stud.
|
|
| Author: | Greenbutterfly | | Posted: | Apr 4, 2021 00:48 | | Subject: | Wanted list uploads blocked by custom parts | | Viewed: | 54 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| I have a very, very large model of a cathedral. I originally designed it in LDD
18 years ago and now updating it in stud.io.
The cathedral has a balcony with railings. I've created a couple of custom
parts for the railings to fit around the columns... the presence of these railings
in my IO file blocks the upload to my wanted list because they are not genuine
parts available through BL.
I'd like to see those parts ignored... or at least an option to do so.
I know there's the workaround of going through the IO file and deleting them
to upload. But my file has over 46000 parts, these custom parts are embedded
several layers deep in multiple sub-sub-sub-models... which means they're
difficult to find because stud.io doesn't have a fully function find-replace
mechanism (I and plenty of others have requested it, and requested that it work
with sub-models as well as main model).
This is still a work in progress, so I'm not really wanting to delete them
because re-instating them is going to be a pain. Plus with the size of the model
stud.io doesn't behave quite as it should anyway because of all the memory
leaks in it (which is going to affect any attempt to copy-paste the file then
delete the custom parts in the copy)...
PS. I'm sure I've requested this before, but for the life of me cannot
find it. stud.io isn't the only thing with memory leaks
|
|
| Author: | leggodtshop | | Posted: | Apr 4, 2021 00:46 | | Subject: | Re: Add tax inclusive/exempt option on refund | | Viewed: | 25 times | | Topic: | Suggestions | |
|
| In Suggestions, qwertyboy writes:
| | In Suggestions, Emporiosa writes:
| | In Suggestions, cosmicray writes:
| | In Suggestions, Emporiosa writes:
| | Had a thought about the previous discussion where it is quite confusing currently
for processing refunds for US states that have collected sales tax. As it stands,
the refund box has us enter an amount, and then below it calculates the amount
that will come from the seller/PayPal, and the amount from the taxes BrickLink
collected, so a seller has to know the rate of tax for the state of the buyer
and also include it in the total.
|
Which is different from the exemption issue. The real important question about
this is, who determines that a buyer is exempt, the seller or BL. From my perspective
it would be BL that processes the buyer's exemption certificate (as it would
cover all sellers shipping to that buyer).
| | Suggestion:
-Beside the box where you enter the refund amount, include a "tax inclusive"
and "tax exclusive" radio button where the seller can select it.
This would allow sellers to not have to know the rate of state for the state
and manually calculate it by selecting "tax exclusive", meaning the calculation
below will take that amount, and ADD tax to the total (not as a % of the total
the seller put in).
|
Seller's will not know, particularly when the tax rate varies by jurisdiction
within a state. Florida has a statewide base rate of 6%, but a county optional
add-on of 0%-1.5%. So the rate may vary depending on the specific address within
the state. The rate can more likely be retrieved by the service that BL is using
to pull up this information.
| | But this also allows what Niek (qwertyboy) had suggested where if you want to
give a higher total amount, you can check tax inclusive so it'll act the
way that it's currently programmed.
|
Nita Rae
|
By tax exclusive, I wasn't referring to any kind of tax exemption. Tax exclusive
when referring to calculators like this means that the total you have entered
does not include the sales tax. This is how sellers want it to operate (based
on discussions), where the amount we enter is tax exclusive, so the calculation
below it will add the tax automatically without the seller having to calculate
it (since we can't easily know what the rates are).
Tax inclusive is for when a seller is doing an amount (usually) above and beyond
just a direct refund of a part. To clarify, how it works right now by default
is this method - tax inclusive. When you enter an amount, the calculator believes
that you already included the sales tax, and it's doing the breakdown of
which part of that refund is sales tax, and what is the amount for the item(s)
itself.
|
... and to make things even more complex - I believe some states have taxes on
shipping as well, and others don't. What if you agree to refund an item from
the order plus the order's shipping cost? BL can't know what part of
the agreed-upon refund amount is for shipping. It will likely refund too much
of its tax collection and not enough from the seller's pocket.
(This is not a hypothetical situation - if we can't fulfill something from
an order and it is the most important or most valuable part, we could agree to
refund part+shipping.)
Niek.
|
There can be only one party responsible for tax/vat and that is the seller. So..
if BrickLink is taking on the burden of tax/vat and be liable for it, there can
only be one conclusion: BrickLink is the seller. Hence, BrickLink does the sale,
the invoicing, the tax/vat, the refund, etc. (And takes care of the not hypothetical
situation described above.)
|
|
| Author: | qwertyboy | | Posted: | Apr 4, 2021 00:14 | | Subject: | Re: Add tax inclusive/exempt option on refund | | Viewed: | 33 times | | Topic: | Suggestions | |
|
| In Suggestions, Emporiosa writes:
| | In Suggestions, cosmicray writes:
| | In Suggestions, Emporiosa writes:
| | Had a thought about the previous discussion where it is quite confusing currently
for processing refunds for US states that have collected sales tax. As it stands,
the refund box has us enter an amount, and then below it calculates the amount
that will come from the seller/PayPal, and the amount from the taxes BrickLink
collected, so a seller has to know the rate of tax for the state of the buyer
and also include it in the total.
|
Which is different from the exemption issue. The real important question about
this is, who determines that a buyer is exempt, the seller or BL. From my perspective
it would be BL that processes the buyer's exemption certificate (as it would
cover all sellers shipping to that buyer).
| | Suggestion:
-Beside the box where you enter the refund amount, include a "tax inclusive"
and "tax exclusive" radio button where the seller can select it.
This would allow sellers to not have to know the rate of state for the state
and manually calculate it by selecting "tax exclusive", meaning the calculation
below will take that amount, and ADD tax to the total (not as a % of the total
the seller put in).
|
Seller's will not know, particularly when the tax rate varies by jurisdiction
within a state. Florida has a statewide base rate of 6%, but a county optional
add-on of 0%-1.5%. So the rate may vary depending on the specific address within
the state. The rate can more likely be retrieved by the service that BL is using
to pull up this information.
| | But this also allows what Niek (qwertyboy) had suggested where if you want to
give a higher total amount, you can check tax inclusive so it'll act the
way that it's currently programmed.
|
Nita Rae
|
By tax exclusive, I wasn't referring to any kind of tax exemption. Tax exclusive
when referring to calculators like this means that the total you have entered
does not include the sales tax. This is how sellers want it to operate (based
on discussions), where the amount we enter is tax exclusive, so the calculation
below it will add the tax automatically without the seller having to calculate
it (since we can't easily know what the rates are).
Tax inclusive is for when a seller is doing an amount (usually) above and beyond
just a direct refund of a part. To clarify, how it works right now by default
is this method - tax inclusive. When you enter an amount, the calculator believes
that you already included the sales tax, and it's doing the breakdown of
which part of that refund is sales tax, and what is the amount for the item(s)
itself.
|
... and to make things even more complex - I believe some states have taxes on
shipping as well, and others don't. What if you agree to refund an item from
the order plus the order's shipping cost? BL can't know what part of
the agreed-upon refund amount is for shipping. It will likely refund too much
of its tax collection and not enough from the seller's pocket.
(This is not a hypothetical situation - if we can't fulfill something from
an order and it is the most important or most valuable part, we could agree to
refund part+shipping.)
Niek.
|
|
| Author: | weblectricity | | Posted: | Apr 3, 2021 19:32 | | Subject: | Re: inventory process | | Viewed: | 24 times | | Topic: | Inventories | |
|
| Thank you!
2 things I forgot to ask:
1) do I need to provide info for counterparts - which parts are stickered?
2) if I encounter parts in previously unused colors (2x4 tile in coral) do I
submit them prior to submitting the full set inventory?
Thanks,
Peter
In Inventories, randyf writes:
| | In Inventories, weblectricity writes:
|
|
|
| Author: | normann1974 | | Posted: | Apr 3, 2021 18:48 | | Subject: | Inventory Change Request for Set 8620-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 2715 White Technic, Figure Accessory Helmet (match ID 1)
* Delete 1 Part 2716 Trans-Clear Technic, Figure Accessory Helmet Visor (match ID 1)
* Change 1 Minifig {tech003 Technic Figure White Legs, White Top with Red Stripes Pattern, Blue Arms (Skier) to tech003a Technic Figure White Legs, White Top with Red Stripes Pattern, Blue Arms, White Helmet (Skier)}
Comments from Submitter:
The helmet and visor are now included in the minifig which now makes the alternate minifig make sense.
|
|
| Author: | randyf | | Posted: | Apr 3, 2021 17:42 | | Subject: | Inventory Change Request for Set 70725-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
* Change 4 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
|
| Author: | randyf | | Posted: | Apr 3, 2021 17:30 | | Subject: | Re: inventory process | | Viewed: | 30 times | | Topic: | Inventories | |
|
| In Inventories, weblectricity writes:
| | Hello,
I'd like to submit an inventory for a set that has not been inventoried yet.
It's a Lego Friends set, 41446. I've previously inventories a polybag
set, but this one is bigger.
I've browsed around the site but have not found answers to my questions,
though maybe I've missed something.
My questions:
1) There are 3 new minifigures. Do I have to first seperately submit the minifigures
to the catalog and wait for them to be approved before I can submit the set,
or can I just submit them with the set?
|
You can start the inventory process of the set without the minifigures in it,
but the minifigures will have to be in the inventory before it gets approved
to the catalog.
| | 2) There's a sticker sheet. Again do I have to submit the sticker sheet seperately
or along with the set? Do I need to provide photos?
|
The sticker sheet gets submitted as a separate item to the catalog. Once again,
you can start the inventory process of the set without the sticker sheet in it,
but the sticker sheet will have to be in the inventory before it gets approved
to the catalog.
And, yes, a photo or scan of the sticker sheet will be needed to get it approved
to the catalog.
| | 3) Do I have to provide photographs for the stickered parts/counterparts? I don't
want to apply the stickers.
|
No.
| | Anyway, I'm off to opening the set and assembling the minifigs to take some
photos.
Thank you,
best,
Peter
|
|
|
| Author: | peregrinator | | Posted: | Apr 3, 2021 16:58 | | Subject: | Re: Refund | | Viewed: | 31 times | | Topic: | Inventories | |
|
| In Inventories, Brickwilbo writes:
| | In Inventories, CapstoneBricks writes:
| | When I issue a full refund does the inventory go back into my inventory automatically?
|
No you need to follow the steps of the order cancelation process.
|
As Brickwilbo writes, you have to cancel the order in order for the inventory
to go back. I think there's a good reason for this - you might refund the
order for a variety of reasons, including the order getting lost in the mail.
You wouldn't want that going back to your inventory.
|
|
| Author: | weblectricity | | Posted: | Apr 3, 2021 16:25 | | Subject: | inventory process | | Viewed: | 75 times | | Topic: | Inventories | | Status: | Open | |
|
| Hello,
I'd like to submit an inventory for a set that has not been inventoried yet.
It's a Lego Friends set, 41446. I've previously inventories a polybag
set, but this one is bigger.
I've browsed around the site but have not found answers to my questions,
though maybe I've missed something.
My questions:
1) There are 3 new minifigures. Do I have to first seperately submit the minifigures
to the catalog and wait for them to be approved before I can submit the set,
or can I just submit them with the set?
2) There's a sticker sheet. Again do I have to submit the sticker sheet seperately
or along with the set? Do I need to provide photos?
3) Do I have to provide photographs for the stickered parts/counterparts? I don't
want to apply the stickers.
Anyway, I'm off to opening the set and assembling the minifigs to take some
photos.
Thank you,
best,
Peter
|
|
| Author: | Brickwilbo | | Posted: | Apr 3, 2021 14:10 | | Subject: | Re: Refund | | Viewed: | 43 times | | Topic: | Inventories | |
|
| In Inventories, CapstoneBricks writes:
| | When I issue a full refund does the inventory go back into my inventory automatically?
|
No you need to follow the steps of the order cancelation process.
|
|
| Author: | Classicsmiley | | Posted: | Apr 3, 2021 14:06 | | Subject: | Re: what color is the 1x4 brick | | Viewed: | 38 times | | Topic: | Colors | |
|
| In Colors, lmhansmangmail. writes:
| | I got an 1x4 brick but i cannot find the satisfying color in the catalog. I would
say it is either medium brown or dark nougat both do not exist in the catalog
can someone help with identifying the color
the other colors on the picture are reddish brown (left crate) medium nougat
(right crate) and dark orange (slope)
|
Could you please post a close-up of the studs?
|
| Author: | CapstoneBricks | | Posted: | Apr 3, 2021 13:16 | | Subject: | Refund | | Viewed: | 91 times | | Topic: | Inventories | | Status: | Open | |
|
| | When I issue a full refund does the inventory go back into my inventory automatically? |
|
| Author: | Stuart9 | | Posted: | Apr 3, 2021 12:59 | | Subject: | Re: what color is the 1x4 brick | | Viewed: | 22 times | | Topic: | Colors | |
|
| You can find early bricks without Lego logo on the studs but not often seen these
days, most have slots but not all.
The long side fill gate was used on a few odd moulds, usually test moulds I believe.
I have seen clone brands with the colour shown by OP.
In Colors, roguemjr writes:
| | If LEGO is not on the studs, then it is not a LEGO. I have never seen a part
that you cannot read LEGO on the studs. I have parts from bulk lots severely
worn, bitten, scratched up, and have never seen a part that you can't read
the logo on the studs.
As stated in other posts, the fact that the fill gate is on the long side of
the part is another sure sign that this is not LEGO.
In Colors, lmhansmangmail. writes:
| | I got an 1x4 brick but i cannot find the satisfying color in the catalog. I would
say it is either medium brown or dark nougat both do not exist in the catalog
can someone help with identifying the color
the other colors on the picture are reddish brown (left crate) medium nougat
(right crate) and dark orange (slope)
|
|
|
|
| Author: | roguemjr | | Posted: | Apr 3, 2021 12:28 | | Subject: | Re: what color is the 1x4 brick | | Viewed: | 33 times | | Topic: | Colors | |
|
| If LEGO is not on the studs, then it is not a LEGO. I have never seen a part
that you cannot read LEGO on the studs. I have parts from bulk lots severely
worn, bitten, scratched up, and have never seen a part that you can't read
the logo on the studs.
As stated in other posts, the fact that the fill gate is on the long side of
the part is another sure sign that this is not LEGO.
In Colors, lmhansmangmail. writes:
| | I got an 1x4 brick but i cannot find the satisfying color in the catalog. I would
say it is either medium brown or dark nougat both do not exist in the catalog
can someone help with identifying the color
the other colors on the picture are reddish brown (left crate) medium nougat
(right crate) and dark orange (slope)
|
|
|
| Author: | Turez | | Posted: | Apr 3, 2021 12:10 | | Subject: | Re: tls095 Lego Employee, Kidsfest 2013 | | Viewed: | 29 times | | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
Maybe it would be better to create a new set entry for that blister pack set?
Like
for example.
|
|
| Author: | 1974 | | Posted: | Apr 3, 2021 10:44 | | Subject: | Re: what color is the 1x4 brick | | Viewed: | 41 times | | Topic: | Colors | |
|
| PLEASE take a picture of the logos!
Never seen a clone brick with "LEGO" logos ...
Also, it just looks (old) brown to me 
Cheers,
Ole
In Colors, lmhansmangmail. writes:
| | yeah it is on the side and there are other differences i have decided it is a
fake and there are lego logo's on it but also they are also off.
|
|
|
| Author: | StormChaser | | Posted: | Apr 3, 2021 10:12 | | Subject: | Re: First Lego League set 9781 | | Viewed: | 37 times | | Topic: | Inventories | |
|
| In Inventories, GUIDOandMONIQUE writes:
| | Is here anybody how can help me wit more information about these first Lego league
set 9781.
Its in the time period of the rcx and it was a set from around the year 2000.
The content was 726 pcs.
I have the cover of the green box but cant find anything about it.
|
We've had a set entry in the catalog for years that had no image:
I know the first FLL challenge (1998-2000) used Mindstorms, so my guess is that
our existing catalog entry contains a typographical error on the set number.
If you'd like, we can correct this using the photo you supplied.
|
|
| Author: | Emporiosa | | Posted: | Apr 3, 2021 10:01 | | Subject: | Re: Add tax inclusive/exempt option on refund | | Viewed: | 39 times | | Topic: | Suggestions | |
|
| In Suggestions, cosmicray writes:
| | In Suggestions, Emporiosa writes:
| | Had a thought about the previous discussion where it is quite confusing currently
for processing refunds for US states that have collected sales tax. As it stands,
the refund box has us enter an amount, and then below it calculates the amount
that will come from the seller/PayPal, and the amount from the taxes BrickLink
collected, so a seller has to know the rate of tax for the state of the buyer
and also include it in the total.
|
Which is different from the exemption issue. The real important question about
this is, who determines that a buyer is exempt, the seller or BL. From my perspective
it would be BL that processes the buyer's exemption certificate (as it would
cover all sellers shipping to that buyer).
| | Suggestion:
-Beside the box where you enter the refund amount, include a "tax inclusive"
and "tax exclusive" radio button where the seller can select it.
This would allow sellers to not have to know the rate of state for the state
and manually calculate it by selecting "tax exclusive", meaning the calculation
below will take that amount, and ADD tax to the total (not as a % of the total
the seller put in).
|
Seller's will not know, particularly when the tax rate varies by jurisdiction
within a state. Florida has a statewide base rate of 6%, but a county optional
add-on of 0%-1.5%. So the rate may vary depending on the specific address within
the state. The rate can more likely be retrieved by the service that BL is using
to pull up this information.
| | But this also allows what Niek (qwertyboy) had suggested where if you want to
give a higher total amount, you can check tax inclusive so it'll act the
way that it's currently programmed.
|
Nita Rae
|
By tax exclusive, I wasn't referring to any kind of tax exemption. Tax exclusive
when referring to calculators like this means that the total you have entered
does not include the sales tax. This is how sellers want it to operate (based
on discussions), where the amount we enter is tax exclusive, so the calculation
below it will add the tax automatically without the seller having to calculate
it (since we can't easily know what the rates are).
Tax inclusive is for when a seller is doing an amount (usually) above and beyond
just a direct refund of a part. To clarify, how it works right now by default
is this method - tax inclusive. When you enter an amount, the calculator believes
that you already included the sales tax, and it's doing the breakdown of
which part of that refund is sales tax, and what is the amount for the item(s)
itself.
|
|
|
| Author: | cosmicray | | Posted: | Apr 3, 2021 09:28 | | Subject: | Re: Add tax inclusive/exempt option on refund | | Viewed: | 33 times | | Topic: | Suggestions | |
|
| In Suggestions, Emporiosa writes:
| | Had a thought about the previous discussion where it is quite confusing currently
for processing refunds for US states that have collected sales tax. As it stands,
the refund box has us enter an amount, and then below it calculates the amount
that will come from the seller/PayPal, and the amount from the taxes BrickLink
collected, so a seller has to know the rate of tax for the state of the buyer
and also include it in the total.
|
Which is different from the exemption issue. The real important question about
this is, who determines that a buyer is exempt, the seller or BL. From my perspective
it would be BL that processes the buyer's exemption certificate (as it would
cover all sellers shipping to that buyer).
| | Suggestion:
-Beside the box where you enter the refund amount, include a "tax inclusive"
and "tax exclusive" radio button where the seller can select it.
This would allow sellers to not have to know the rate of state for the state
and manually calculate it by selecting "tax exclusive", meaning the calculation
below will take that amount, and ADD tax to the total (not as a % of the total
the seller put in).
|
Seller's will not know, particularly when the tax rate varies by jurisdiction
within a state. Florida has a statewide base rate of 6%, but a county optional
add-on of 0%-1.5%. So the rate may vary depending on the specific address within
the state. The rate can more likely be retrieved by the service that BL is using
to pull up this information.
| | But this also allows what Niek (qwertyboy) had suggested where if you want to
give a higher total amount, you can check tax inclusive so it'll act the
way that it's currently programmed.
|
Nita Rae
|
|
| Author: | Emporiosa | | Posted: | Apr 3, 2021 09:02 | | Subject: | Add tax inclusive/exempt option on refund | | Viewed: | 82 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Had a thought about the previous discussion where it is quite confusing currently
for processing refunds for US states that have collected sales tax. As it stands,
the refund box has us enter an amount, and then below it calculates the amount
that will come from the seller/PayPal, and the amount from the taxes BrickLink
collected, so a seller has to know the rate of tax for the state of the buyer
and also include it in the total.
Suggestion:
-Beside the box where you enter the refund amount, include a "tax inclusive"
and "tax exclusive" radio button where the seller can select it.
This would allow sellers to not have to know the rate of state for the state
and manually calculate it by selecting "tax exclusive", meaning the calculation
below will take that amount, and ADD tax to the total (not as a % of the total
the seller put in).
But this also allows what Niek (qwertyboy) had suggested where if you want to
give a higher total amount, you can check tax inclusive so it'll act the
way that it's currently programmed.
|
|
| Author: | shiniz | | Posted: | Apr 3, 2021 08:55 | | Subject: | Re: Inventory Change Request for Set 40145-1 | | Viewed: | 17 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, shiniz writes:
| | Please make changes to the following inventory:
* Add 2 Part 3004pb222 Blue Brick 1 x 2 with White 'City', Red Car and Black Minifigure Silhouette Pattern (Sticker) - Set 40305 (Counterpart)
* Add 2 Part 3004pb221 Yellow Brick 1 x 2 with White 'Creator', Yellow House with Red Roof and Door on Black Baseplate Pattern (Sticker) - Set 40305 (Counterpart)
* Add 2 Part 3004pb224 Red Brick 1 x 2 with White 'Juniors', White Building with Red Door on Black Baseplate and Minifigure Silhouette Pattern (Sticker) - Set 40305 (Counterpart)
Comments from Submitter:
These parts are included in set 40305-1.
|
But to finish the inventory of set 40145-1, there are 3 pieces left which are
not referenced in Bricklink. These are the photo attachments. Do any of you have
a reference to pass on to me please ? :
- 1 tile with groove (item n° 3068b) white with a red stickers "LEGO" and black
frame;
- 2 bricks 1 x 2 (item n° 3004) medium lavender with stickers "friends";
- 2 bricks 1 x 2 (item n° 3004) green with stickers "Ninjago".
Thanks for your help
|
|
|
| Author: | axaday | | Posted: | Apr 3, 2021 08:34 | | Subject: | Inventory Change Request for Set 3807-1 | | Viewed: | 13 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628b Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Squared Pin Hole}
|
|
| Author: | SylvainLS | | Posted: | Apr 3, 2021 08:24 | | Subject: | Re: what color is the 1x4 brick | | Viewed: | 28 times | | Topic: | Colors | |
|
| In Colors, lmhansmangmail. writes:
| | In Colors, peregrinator writes:
| | In Colors, lmhansmangmail. writes:
| | I got an 1x4 brick but i cannot find the satisfying color in the catalog. I would
say it is either medium brown or dark nougat both do not exist in the catalog
can someone help with identifying the color
the other colors on the picture are reddish brown (left crate) medium nougat
(right crate) and dark orange (slope)
|
Is that a sprue mark (pip) on the long side of that brick? AFAIK a Lego brick
would have one on the short side (old) or on the top (newer)
|
yeah it is on the side and there are other differences i have decided it is a
fake and there are lego logo's on it but also they are also off.
|
Aren’t they 0937? I think there was a clone that tried that trick….
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
Canada, Ontario
Italy, Marche
United Kingdom, England
Netherlands, Drenthe
Germany, Niedersachsen
)
)
)
)
)
Denmark
Australia, South Australia
Spain, Comunidad Valenciana
France, Grand Est
Switzerland, Bern
Slovenia
