Discussion Forum: Suggestions(Post New Message)
Redisplay Messages: Compact | Brief | All | Full      Show Messages: All | Without Replies

View Thread Re: Automatic feedback - tons_of_bricks (12772)
I know some people might think this isn't a good suggestion, but if you think about it, how many of us actually leave a personalized feedback? Whenever I look at feedback [...]
(50 months ago, Apr 10, 2020, to Suggestions)
View Thread Re: Automatic feedback - Erikmax (12170)
[...] Yes I agree, my idea is that it should be an option that can be turned on/off and also leaves the possibility to give it manually. So only if it is not done manually [...]
(50 months ago, Apr 10, 2020, to Suggestions)
View Thread Re: Automatic feedback - infinibrix (5003)
[...] Yes I think options to have feedback automated for sellers would make a lot of sense. I think with ebay you can set it so that feedback is automatically left when payment [...]
(50 months ago, Apr 10, 2020, to Suggestions)
View Thread Automatic feedback - Erikmax (12170)
Please don't blame me for bringing up the following suggestion, it might be a sensitive issue. I don't know if this suggestion has been done before. I am one of the dealers [...]
(50 months ago, Apr 10, 2020, to Suggestions)
View Thread Re: Use my store's inventory to fill Wanted List - Rakali (1841)
Not one that won't get you barked at, but the easiest solution is to have a "friend" make the order for you and either pay the BL fee on it, or I guess you could cancel the [...]
(50 months ago, Apr 3, 2020, to Suggestions)
View Thread Re: Search for multiple items ? - djrowdy (74)
[...] I use a workaround when I want to do this. Create a bew wanted list and COPY (do not move) the items to this new list (for example all minifigs you want can [...]
(50 months ago, Apr 3, 2020, to Suggestions)
View Thread Re: Use my store's inventory to fill Wanted List - Sarrow1986 (47)
[...] Hi there! As the quarantine hit us all, I also want to use parts of my own store to build stuff. Is there a solution for this? Lego in there guys!
(50 months ago, Apr 2, 2020, to Suggestions)
View Thread Re: Fix the NPB and Cancellation Process - Jamesf077 (2727)
I have done, now he asking to cancel and start again!!
(50 months ago, Apr 2, 2020, to Suggestions)
View Thread Re: Fix the NPB and Cancellation Process - Brickwilbo (1534)
[...] Change the orderstatus to packed then no new batches can be added.
(50 months ago, Apr 2, 2020, to Suggestions)
View Thread Re: Fix the NPB and Cancellation Process - Jamesf077 (2727)
I'm going through the this situation at the moment, buyer placed an order for 650 parts and didn't respond to 1st invoice. He then added another 900 parts 3 days later [...]
(50 months ago, Apr 2, 2020, to Suggestions)
View Thread Re: Please add currencies - SylvainLS (46)
[...] Here it’s LVMH who put their perfume factories to the task, not their wineries and distilleries. They’re giving it to hospitals (they can afford it ;)) so [...]
(50 months ago, Apr 1, 2020, to Suggestions)
View Thread Re: Please add currencies - popsicle (6665)
[...] Interesting thoughts. I don't hold the same sentiments, though. btw, I like your use of the term "smithereens" Seldom see it used any more.
(50 months ago, Apr 1, 2020, to Suggestions)
View Thread Re: Please add currencies - uvt203 (11771)
[...] We might also want to have HCA as currency (hand cleaning alcohol). Here in Denmark we have a whisky distillery which has changed production from the finest peated [...]
(50 months ago, Apr 1, 2020, to Suggestions)
View Thread Re: Please add currencies - Stuart9 (1067)
Definitely the latter, sadly. In Suggestions, StarBrick writes: [...]
(50 months ago, Apr 1, 2020, to Suggestions)
View Thread Re: Please add currencies - StarBrick (7072)
[...] It's our nature biting us in our butt. In 10 years I wonder how we look back at these times: will it be our last chance for major change in our thinking and acting, [...]
(50 months ago, Apr 1, 2020, to Suggestions)
View Thread Re: Please add currencies - popsicle (6665)
[...] World production of paracetamol is concentrated in China and India, the two countries occupy about 89.86% of the global production (China 70% India 19%, as per 2018 [...]
(50 months ago, Mar 31, 2020, to Suggestions)
View Thread Re: Please add currencies - SylvainLS (46)
[...] Oops, I forgot that. Maybe I should buy some :D (APAP / acetaminophen for those who don’t use the name paracetamol.) [...] Yeah France! Always ahead! At [...]
(50 months ago, Mar 31, 2020, to Suggestions)
View Thread Re: Please add currencies - Stuart9 (1067)
:) I'd suggest paracetamol too but that would make them a drug dealer. ;) Still Tuesday here. In Suggestions, SylvainLS writes: [...]
(50 months ago, Mar 31, 2020, to Suggestions)
View Thread Please add currencies - SylvainLS (46)
Dear BrickLink, Considering the worldwide situation, the financial measures already started in many countries (including the USA and the EU) and the financial measured [...]
(50 months ago, Mar 31, 2020, to Suggestions)
View Thread Wanted lists"&buying: Set default "Condition" - Cerbrus (56)
I have a setting / feature request: I recently made a mistake by not checking the condition of a list of bricks imported into a wanted list. Only after I placed the order, I [...]
(50 months ago, Mar 31, 2020, to Suggestions)
View Thread Re: Use my store's inventory to fill Wanted List - Moosedesign (43)
Has this changed at all in the intervening 3 year since this post was made? Is there a way to use your store/stockroom inventory to fulfill wanted lists?
(50 months ago, Mar 30, 2020, to Suggestions)
View Thread Re: Money off code to distribute - yorbrick (1185)
[...] You don't use Instant Checkout, so why not just put your code on facebook or wherever, saying add it to the order comments. Then you can manually adjust.
(51 months ago, Mar 25, 2020, to Suggestions)
View Thread Re: Money off code to distribute - SylvainLS (46)
[...] The goal isn’t to have every buyer pay the “best” price. This “best” price is funded by the ones who don’t pay it. IOW, you say “when you have the power to reduce prices [...]
(51 months ago, Mar 25, 2020, to Suggestions)
View Thread Re: Money off code to distribute - MidwestBrick (1855)
[...] What about your regular customers that might not be on social media? How do they get the deals you are allowing for others? Sounds like a grocery store where you need [...]
(51 months ago, Mar 25, 2020, to Suggestions)
View Thread Re: Money off code to distribute - Leftoverbricks (2225)
[...] You could use the store banner: "Request a quote and receive a discount for xxxx"
(51 months ago, Mar 25, 2020, to Suggestions)
View Thread Re: Money off code to distribute - calsbricks (8516)
[...] Nothing wrong with drawing people to the site e.g. encouraging it for the right reasons. Perhaps with TLG actually getting involved and some marketing effort put in [...]
(51 months ago, Mar 25, 2020, to Suggestions)
View Thread Re: Money off code to distribute - infinibrix (5003)
[...] I think part of the idea is to draw people to the site that don't know about bricklink buts its like that flyer for the takeaway down the road, you ignore it! but [...]
(51 months ago, Mar 25, 2020, to Suggestions)
View Thread Re: Money off code to distribute - calsbricks (8516)
[...] Adding yet another facility to race to the bottom - are you sure that is a good thing? Whilst figures rarely lie - they also mislead people. The latest digital media [...]
(51 months ago, Mar 25, 2020, to Suggestions)
View Thread Re: Money off code to distribute - infinibrix (5003)
[...] Its actually a very good idea but I have a feeling it may take a bit of time and effort to implement what with the long list of other things that are needed but definitly [...]
(51 months ago, Mar 25, 2020, to Suggestions)
View Thread Re: Money off code to distribute - superchicken77 (1274)
This feature could have a usage limit too. For example, I could generate a coupon code for 20% off and it would work for the first 10 orders. In Suggestions, allenafol writes: [...]
(51 months ago, Mar 25, 2020, to Suggestions)
View Thread Re: Money off code to distribute - infinibrix (5003)
[...] The downsides would be that you have to give a discount! :D
(51 months ago, Mar 25, 2020, to Suggestions)
View Thread Re: Money off code to distribute - popsicle (6665)
[...] It would be effective in driving traffic to the site. Interested in reading other inputs. What are the downsides (if any) to the idea. -Cory
(51 months ago, Mar 25, 2020, to Suggestions)
View Thread Money off code to distribute - allenafol (3794)
Hi, I think it would be great if you could generate a code for your store so people could enter it for a discount. This would be good for marketing on social media rather than [...]
(51 months ago, Mar 25, 2020, to Suggestions)
View Thread Re: Updates to Instant Checkout (Canada) - jennnifer (3535)
[...] The differences in our zones is much smaller. For me in Chicago, the smallest package ranges from $2.74 to $3.18. A 16oz package is $5.04 to $5.70. Over that weight, [...]
(51 months ago, Mar 23, 2020, to Suggestions)
View Thread Re: Updates to Instant Checkout (Canada) - Emporiosa (5555)
[...] Ok good to know. I'm not sure how granular it is for you guys with USPS but for us in Canada, we go from basic Lettermail (2cm thickness maximum, low weight max) [...]
(51 months ago, Mar 23, 2020, to Suggestions)
View Thread Re: Updates to Instant Checkout (Canada) - jennnifer (3535)
[...] I believe those 'zones' are just ways for the seller to organize international shipping. My understanding is that there are no zip code based anything in IC. [...]
(51 months ago, Mar 23, 2020, to Suggestions)
View Thread Re: Updates to Instant Checkout (Canada) - Emporiosa (5555)
[...] Ah ok, I only based it on what I read in the help notes here: (URL) So for US sellers, how do get to establish what a zone is? As far as I can tell for us here, we can't [...]
(51 months ago, Mar 23, 2020, to Suggestions)
View Thread Re: Updates to Instant Checkout (Canada) - jennnifer (3535)
[...] IC did not use the USPS API last time I checked. I think most sellers just decided on one rate that covered the costs in most zones and left it at that. Jen
(51 months ago, Mar 23, 2020, to Suggestions)
View Thread Updates to Instant Checkout (Canada) - Emporiosa (5555)
As far as I can see, IC looks to have been setup in 2017 with little to no additional updates having been made to it. I have e-mailed Help Desk a couple of months ago with no [...]
(51 months ago, Mar 23, 2020, to Suggestions)
View Thread Re: search including parts in a part or in a set - drg7949 (549)
This post has been around for a while, but it's exactly the enhancement I'd like to see implemented. Example: If I have a particular torso on my wantlist, and I'm [...]
(51 months ago, Mar 22, 2020, to Suggestions)
View Thread Re: Fix the NPB and Cancellation Process - popsicle (6665)
[...] Well thought-out, Jonathan. Voted yes. Not that I expect the needle to be moved in doing so, but as a show of support. I think most are aware of the issue's persistence [...]
(51 months ago, Mar 21, 2020, to Suggestions)
View Thread Re: Fix the NPB and Cancellation Process - waltzking (8744)
[...] Glad your experience has been mostly positive. I too love new buyers, always helping them through the learning curve here when possible. Just because you haven't [...]
(51 months ago, Mar 21, 2020, to Suggestions)
View Thread Re: Fix the NPB and Cancellation Process - Adjour (2466)
[...] Yeah this x 10000 I love my new buyers, I have not had issues with them, my last NPB was a 200 + feedback person. Before that I can't recall, because it was year [...]
(51 months ago, Mar 21, 2020, to Suggestions)
View Thread Re: Fix the NPB and Cancellation Process - cosmicray (3492)
[...] #1a and #1b have been suggested in the past, to no effect. The best way to stop that problem is to lock your store down, so that no order can be created without IC. That [...]
(51 months ago, Mar 21, 2020, to Suggestions)
View Thread Re: Fix the NPB and Cancellation Process - HC (9590)
hi,Jonathan I totaly agree...these are very good suggestions! lately i have an explosion of 0 feedbackers myself ordering/not reading store terms never reply on messages/reminders [...]
(51 months ago, Mar 20, 2020, to Suggestions)
View Thread Fix the NPB and Cancellation Process - waltzking (8744)
I think BrickLink has a broken order process now due to the ever changing online buying experience. For me I have seen an influx of buyers since the LEGO takeover of BL, most [...]
(51 months ago, Mar 20, 2020, to Suggestions)
View Thread Re: Decorated categories - StormChaser (569)
[...] This idea was tossed around between administrators (including Dan) in 2007/2008. It was deemed at the time to be an interesting idea with some positives, but [...]
(51 months ago, Mar 18, 2020, to Suggestions)
View Thread Re: Decorated categories - yorbrick (1185)
[...] I think for now learning to use search terms would be easier than adding loads of new categories.
(51 months ago, Mar 18, 2020, to Suggestions)
View Thread Re: Decorated categories - tonnic (4350)
[...] I would rather have more categories with less entries per categorie so for me the suggestion would work. Categories are more easily to be found than subcategories/entries [...]
(51 months ago, Mar 18, 2020, to Suggestions)
View Thread Re: Decorated categories - jennnifer (3535)
[...] You can achieve much the same thing by searching -sticker in the decorated category. Jen
(51 months ago, Mar 18, 2020, to Suggestions)
View Thread Re: Decorated categories - axaday (7302)
[...] I think there are so many categories right now that they are very averse to creating more. I'm doubtful that a suggestion that would add more than a dozen new categories [...]
(51 months ago, Mar 18, 2020, to Suggestions)
View Thread Decorated categories - athornberg (346)
Replace "decorated" categories with 2 new categories, "printed" and "with stickers".
(51 months ago, Mar 18, 2020, to Suggestions)
View Thread Re: adding new inventory then edit - samsam2 (2375)
[...] I finally realized that once I submitted a new inventory, it is relatively easy to edit it.... this is not obvious to a new inventory submitter. Every time I went back [...]
(51 months ago, Mar 17, 2020, to Suggestions)
View Thread adding new inventory then edit - samsam2 (2375)
is it just my browser settings causing all input to be lost when going back to edit an inventory before submission? When I'm changing an existing inventory, that page seems [...]
(51 months ago, Mar 17, 2020, to Suggestions)
View Thread Quotes - miskox (627)
I would really like to delete/file... quotes. If I hover over 'my store' icon I see 13 Quotes. They have all been filed so I would prefer not to see this number there. [...]
(51 months ago, Mar 17, 2020, to Suggestions)
View Thread Re: Promocode Functionality - TheBrickGuys (13286)
[...] I think that is a great idea and I would think that it would be quite easy to implement at the checkout page. Great idea! Jim
(51 months ago, Mar 15, 2020, to Suggestions)
View Thread Promocode Functionality - Kuboteka (17320)
Hi all! Sorry for my bad english, but this idea I really want to share with you ;) I think that Bricklink need functionality for sellers to offer Promocode additionaly [...]
(51 months ago, Mar 14, 2020, to Suggestions)
View Thread Re: Bulk Coupon Create Functionality - Brickwilbo (1534)
[...] The bulk coupons feature has been terminated because of spamming.
(51 months ago, Mar 14, 2020, to Suggestions)
View Thread Bulk Coupon Create Functionality - BrickenbergNC (2041)
I think that an option to create coupons in bulk would be very useful. The submission form could include the basic coupon parameters and then have some way of selecting the members [...]
(51 months ago, Mar 14, 2020, to Suggestions)
View Thread Re: Item cost auto worked out when parting out - NelisSolis (3753)
[...] Those options are already provided during part-out, except it is not average but quantity_average: (URL) The option is only shown if you have the "mycost" input fields [...]
(51 months ago, Mar 14, 2020, to Suggestions)
View Thread Re: Item cost auto worked out when parting out - Teup (6606)
[...] Then it could offer 3 options, a bit similar to remarks: Old mycost New mycost Average mycost
(51 months ago, Mar 14, 2020, to Suggestions)
View Thread Re: Item cost auto worked out when parting out - ErwinNL (622)
[...] This will only work if parts always have the same cost price in each set, else you would have to make separate lots for the same part (there is only one mycost field [...]
(51 months ago, Mar 14, 2020, to Suggestions)
View Thread Re: Item cost auto worked out when parting out - Teup (6606)
[...] Yep, I proposed this several times. It should let you enter what you bought it for, then it can calculate a profit ratio, and with that profit ratio it can calculate [...]
(51 months ago, Mar 14, 2020, to Suggestions)
View Thread Re: Item cost auto worked out when parting out - Brickwilbo (1534)
[...] I've read it's easier to add the costs on Brickstock and upload the file than entering the costs one by one on Bricklink.
(51 months ago, Mar 14, 2020, to Suggestions)
View Thread Re: Item cost auto worked out when parting out - NelisSolis (3753)
[...] BrickStock doesn't have an option to calculate / add the MyCost per item.
(51 months ago, Mar 14, 2020, to Suggestions)
View Thread Re: Item cost auto worked out when parting out - Brickwilbo (1534)
[...] Use Brickstock to do that.
(51 months ago, Mar 14, 2020, to Suggestions)
View Thread Item cost auto worked out when parting out - KCFBricks (2063)
Hi there, Do you think a feature will be added in which when you part out a set you can add in how much the set cost and then the system would calculate how much was paid per [...]
(51 months ago, Mar 14, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - mfav (174)
(URL) there's a proof-of-concept for you
(51 months ago, Mar 13, 2020, to Suggestions)
View Thread Re: Dealing with orders - Acorn04 (10802)
Is there an updated location for the BrickStock templates? In Suggestions, tsrplatelayer writes: [...]
(51 months ago, Mar 12, 2020, to Suggestions)
View Thread Re: Problem/bug with shipping minimum order - Teup (6606)
Hey BL team, any update on this? It's quite annoying and I would still really like it to get fixed sometime. Let me know if you need more details. In Suggestions, Teup writes: [...]
(51 months ago, Mar 12, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - DrDrewBlood (59)
I was under the impression Rebrickable did this for builds but not figures. Can you combine different parts of figures on Rebrickable? That may be a good platform for this idea [...]
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - Classicsmiley (285)
[...] Isn't this what Rebrickable is pretty much made for?
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - DrDrewBlood (59)
Thanks Nita for breaking it down like this. Another user suggested just that, and linked Bricklink's instructions for generating such a list. I'm going to explore this [...]
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - popsicle (6665)
[...] [...] Often how it works ;) [...] I like that!
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - randyf (442)
[...] That should have read "there is pretty much a 0% chance that anything custom *will* get added to the catalog". Damn double negative...
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - DrDrewBlood (59)
I remember reading about him when I was pre-med. Maybe he was the unconscious inspiration for my nametage. I'll put him on the list of custom figures I need to make. It'll [...]
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - randyf (442)
[...] This is not going to happen. As one of the other catalog admins already stated, there is pretty much a 0% chance that anything custom will not get added to the catalog. [...]
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - DrDrewBlood (59)
Thank you for the information. I don't know if I'm prepared to go to that length, but I greatly appreciate the practical idea. I'll definitely read more into this.
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - cosmicray (3492)
[...] What you are really asking for, is a method of taking an abstract collection of official LEGO parts, and generating a BL compatible upload to a wanted list. It doesn't [...]
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - popsicle (6665)
[...] If unintentional, even more amazing! Dr Drew was an American surgeon and medical researcher, who pioneered the large-scale blood bank by coming up with better methods, [...]
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - DrDrewBlood (59)
[...] Custom minifigure source: User Bugbot20082 from Eurobricks.
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - DrDrewBlood (59)
[...] Here is a picture of what I had in mind. The entire "Wanted List" portion may need to be removed because of copyright issues. In the very least, it would be cool to browse [...]
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - mfav (174)
Your suggestion to add functionality on this web site simply will not gain any traction with administration. If you think it's a really great idea, get yourself a domain [...]
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - DrDrewBlood (59)
I appreciate you weighing in on this and providing a source. I wasn't aware of this issue. The quote from the admin is: "The problem with the download is that can be viewed [...]
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - yorbrick (1185)
[...] Multiply the number of headgear by the number of heads by the number of torsos by the number of right arms by the number of left arms by the number of hands squared by [...]
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - DrDrewBlood (59)
I assume you're active on Eurobricks' forum then. I have a bunch of MOCs I haven't posted yet, but I'll be adding them there when they're ready. Ghosts, Hufflepuff [...]
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - DrDrewBlood (59)
Thanks. I've given it a lot of thought (maybe too much). The connection to Charles is unintentional (but great catch). It's from my name Andrew, and a [...]
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - SylvainLS (46)
[...] Ideas: already licenced IPs are now forbidden. If you use another IP, (and if you’re selected,) TLG will negotiate and licence the IP. In the meanwhile, the model [...]
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - SylvainLS (46)
[...] That’s what you don’t understand: Wanted Lists are worse than digital models! Studio models are “Display only” not because they don’t want people to share the digital [...]
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - zzed (90)
If only. My main hobby in Bricklink is to build MOC Harry Potter minifigures. I surf the web for ideas, get excited when I come across something clever and then obsess over [...]
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - popsicle (6665)
[...] Agreed. [...] It's a great idea! You present the case for it, well. btw, I like the tribute to Dr. Charles Drew in your username
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - DrDrewBlood (59)
I agree it would generate sales. Generic, unwanted pieces could find a valuable place in purist customs. I've spent hours searching bricklink for parts I have a picture of [...]
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - DrDrewBlood (59)
I don't think users would need the ability to download digital copies of the minifigures. They just need the ability to view the parts list (just like we have with official [...]
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - DrDrewBlood (59)
I don't get it. The LEGO brand is saturated with a huge variety of outside IP. LegoIdeas, MOCs, BrickLink Studio. I don't think what I'm proposing is that different [...]
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - cycbuild (827)
[...] That kind of convenience would surely generate sales, but you'd have to find a site that allows themes otherwise it'd be a total nightmare to navigate through [...]
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - SylvainLS (46)
[...] And none of them is downloadable. They are all “Display only.” [...] Exactly. How would your suggestion work without the ability to download the list of parts (or [...]
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - runner.caller (2651)
[...] You'd think they'd realize that customs add interest to the theme and product and might lead to more sales, both on BL and lego's website. "Cool ghosts, now [...]
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - DrDrewBlood (59)
Yes, the authentic LEGO portion is crucial. There are so many creative ways to use preexisting figure pieces. It would be fun to browse people's ideas, and then have an easy [...]
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - DrDrewBlood (59)
I suppose someone could submit a photo that uses non-purist parts (even though the rules would specify "official LEGO components only". But if the hair color/style wasn't [...]
(51 months ago, Mar 11, 2020, to Suggestions)
View Thread Re: Purist Custom Figures - DrDrewBlood (59)
A search of "Star Wars", "Marvel" and "Harry Potter" bring up designs in Studio Gallery. I don't see what why this would be so different.
(51 months ago, Mar 11, 2020, to Suggestions)

Next Page: 5 More | 10 More | 25 More | 50 More | 100 More