Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | BrickCompulsion | Posted: | May 4, 2021 16:51 | Subject: | Re: Colour help | Viewed: | 48 times | Topic: | Colors | |
|
| cheers - strange as they really don't look like the normal trans dark blue |
Author: | LearnedBrick | Posted: | May 4, 2021 16:44 | Subject: | Re: Colour help | Viewed: | 40 times | Topic: | Colors | |
|
| In Colors, BrickCompulsion writes:
| Hi all
I have 3 of these 11305 and they are like a lighter shade of blue but slightly
translucent
In the photo the 1x3 brick is blue and the other is trans light blue.
What colour are the 11305 ? I’m quite stumped given the options that are known
!
Thanks
Ps they are stamped 2011 the lego group and I can see the part number clearly
|
I usually catalog those as Trans-Dark Blue
|
|
Author: | BrickCompulsion | Posted: | May 4, 2021 16:41 | Subject: | Colour help | Viewed: | 133 times | Topic: | Colors | Status: | Open | |
|
| Hi all
I have 3 of these 11305 and they are like a lighter shade of blue but slightly
translucent
In the photo the 1x3 brick is blue and the other is trans light blue.
What colour are the 11305 ? I’m quite stumped given the options that are known
!
Thanks
Ps they are stamped 2011 the lego group and I can see the part number clearly
|
|
|
Author: | normann1974 | Posted: | May 4, 2021 16:35 | Subject: | Note for part 3010pb031 | Viewed: | 63 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
|
| Please add a note to part that there seems to be at two different
prints, thin and bold.
The attached image clearly shows the difference which was found in a Danish forum
om Facebook (I have obtained permission to post the image here).
I've searched my own collection and found some differing parts that I'll
upload as an comparison image. Because the part only exists in one set, I see
no reason to split the part at this point.
/Jan
|
|
Author: | Bricks_And_More | Posted: | May 4, 2021 16:19 | Subject: | 15% off whole inventory | Viewed: | 74 times | Topic: | Sales | |
|
| 15% discount of whole inventory. |
Author: | rocket951 | Posted: | May 4, 2021 16:06 | Subject: | Re: overcharging sales tax | Viewed: | 58 times | Topic: | Help | |
|
| Indeed that does. Thank you that explains why the rate looked different for different
orders. I suppose I've become so used to free shipping from the LEGO site
that I forgot about including it.
In Help, MrPetovan writes:
| Thanks, I believe this explains the discrepancies that rocket951 reported.
|
|
Author: | Stellar | Posted: | May 4, 2021 16:05 | Subject: | Inventory Change Request for Set 71720-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 44861 Black Plate, Modified 1 x 2 with Open O Clip on Top (Alternate) (match ID 1)
* Change 4 Part Black 92280 Plate, Modified 1 x 2 with Clip on Top {match ID 0 to 1}
Comments from Submitter:
Parted out 5 copies and most had only the newer variant in black.
|
Author: | gabgenqc | Posted: | May 4, 2021 16:05 | Subject: | 30% on all used parts, boxes, minifgs, etc. | Viewed: | 61 times | Topic: | Sales | |
|
| Comes have a look at my used inventory as they are all at 30% off. |
Author: | BrickBros20 | Posted: | May 4, 2021 15:50 | Subject: | 10% ALL Star Wars Minifigures | Viewed: | 43 times | Topic: | Sales | |
|
| Happy May the 4th everyone!! All Star Wars minifigures are currently 10% OFF!
Sale lasts until 11:59 PM CST.
|
Author: | samsam2 | Posted: | May 4, 2021 14:57 | Subject: | Re: Inventory Change Request for Set 8156-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, samsam2 writes:
| Please make changes to the following inventory:
* Change 4 Part Red {4460 Slope 75 2 x 1 x 3 (Undetermined Stud Type) to 4460b Slope 75 2 x 1 x 3 - Hollow Stud}
Comments from Submitter:
not sure if a fully assembled dusty model with peeling stickers on the part in question, proves which part variant
|
|
|
|
Author: | samsam2 | Posted: | May 4, 2021 14:56 | Subject: | Inventory Change Request for Set 8156-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Red {4460 Slope 75 2 x 1 x 3 (Undetermined Stud Type) to 4460b Slope 75 2 x 1 x 3 - Hollow Stud}
Comments from Submitter:
not sure if a fully assembled dusty model with peeling stickers on the part in question, proves which part variant
|
Author: | Huskers1236 | Posted: | May 4, 2021 14:43 | Subject: | Re: Bags | Viewed: | 50 times | Topic: | Help | |
|
| In Help, Scooby2711 writes:
| What size bags do you recommend for mini figures ? Thank you
|
I use 2x3 for all regular sized minifigures and 3x4 for larger figures.
|
|
Author: | Super_G | Posted: | May 4, 2021 14:15 | Subject: | Re: Help ID - Brown legs, hips Red, gray print | Viewed: | 41 times | Topic: | Catalog Identification | |
|
| In Catalog Identification, yorbrick writes:
| In Catalog Identification, Super_G writes:
| Looking for help identifying the minifig these legs belong to ... I searched
all of Bricklink and Brick Owl databases without finding it. There is a "Lego"
stamp on the top between the posts.
The legs and hips are brown with leather armour and rivets, a gray shirt or armour
underneath, with dark red on the knees.
Most likely from the last 10 years - I typically have star wars, chima, ninjago,
nexo, lego movie, collectable minifigs or city.
|
Uruk-hai from LOTR.
|
AWESOME !!! thank you!
|
|
Author: | steppedonalego | Posted: | May 4, 2021 14:15 | Subject: | 10% off on all items! Limited Time Only. | Viewed: | 44 times | Topic: | Sales | |
|
| We have put all items in our store at 10% off. This is a limited time sale. Enjoy! |
Author: | SaveYourBricks | Posted: | May 4, 2021 14:14 | Subject: | May The 4th Sale | Viewed: | 76 times | Topic: | Sales | |
|
| Dear Lego Fans,
today is the biggest day in the galaxy, the May The 4th. This is why you get 15% OFF ALL parts and minifigs. Be sure to be fast, because the sale is ending in a few hours.
You're always welcome in our store.
https://store.bricklink.com/SaveYourBricks
|
|
Author: | BricksThatStick | Posted: | May 4, 2021 14:13 | Subject: | Re: Pending approval: mineravager01 | Viewed: | 53 times | Topic: | Catalog | |
|
| In Catalog, Leftoverbricks writes:
| In Catalog, Leftoverbricks writes:
| Can I help the inventory/catalog admin with this part?
|
Bumping this because I got no reply on my previous post. A newish user reserved
this part mineavager01 six weeks ago. It still has the status of 'pending'.
I would like to know if there's as problem with this part that prohibits
the inventory admins from adding it.
In general I know quite a bit about Minecraft in general and have successfully
contributed a couple of the brick built animals to the catalogue so far .
Ask me, I gladly help!
FYI: Here's a knolling picture of this part which I used to build it.
|
Thanks for the picture - it was approved a couple of days ago:
|
|
Author: | Jack.W11 | Posted: | May 4, 2021 14:10 | Subject: | Re: UP TO 80% SALE FOR LIMITED TIME ONLY | Viewed: | 78 times | Topic: | Sales | |
|
| In Sales, Jack.W11 writes:
| In Sales, yorbrick writes:
| In Sales, Jack.W11 writes:
| In Sales, yorbrick writes:
| In Sales, Jabbz writes:
| In Sales, yorbrick writes:
Having messaged the seller, it is deliberate to limit the amount of sales they
take in.
|
Maybe it would be better to not advertise a sale daily!
|
If your not interested in the sale, please do not reply to the announcement,
it also says ‘see terms’ so if you are interested please see the terms.
|
I don't really see the point of advertising a sale daily then closing a shop
to limit the numbers of orders. So it is not a case of not going interested,
but not being able to see it.
|
If you are interested, shop is open now!
|
85% OFF (due to short term closure of the store )
|
|
Author: | peregrinator | Posted: | May 4, 2021 14:02 | Subject: | Re: Can't Edit Store | Viewed: | 36 times | Topic: | Help | |
|
| In Help, mmb0b writes:
| | Can you please confirm you are viewing this page: https://www.bricklink.com/v2/mystore/display.page
Additionally, please clear your browser cache, either for the whole browser,
or for this page in particular by pressing Ctrl + F5 on Windows, Command + Shift
+ R on Mac OS.
In Help, mmb0b writes:
| Hello Guys,
i can't edit my Store information anymore. The Page "My Store" - "Edit Store"
is blank when i press it.
Is there a way to fix this?
Best Regards
Dave
|
|
I cleard thr cache and reloaded the page. Look at my screenshot. Thats all i
can see.
|
Same behavior on every browser?
|
|
Author: | MrPetovan | Posted: | May 4, 2021 13:41 | Subject: | Re: Can't Edit Store | Viewed: | 39 times | Topic: | Help | |
|
| Can you please confirm you are viewing this page: https://www.bricklink.com/v2/mystore/display.page
Additionally, please clear your browser cache, either for the whole browser,
or for this page in particular by pressing Ctrl + F5 on Windows, Command + Shift
+ R on Mac OS.
In Help, mmb0b writes:
| Hello Guys,
i can't edit my Store information anymore. The Page "My Store" - "Edit Store"
is blank when i press it.
Is there a way to fix this?
Best Regards
Dave
|
|
|
Author: | MrPetovan | Posted: | May 4, 2021 13:38 | Subject: | Re: overcharging sales tax | Viewed: | 52 times | Topic: | Help | |
|
| Thanks, I believe this explains the discrepancies that rocket951 reported.
In Help, peregrinator writes:
| Ah - then I'll just note that the BL sales tax includes all applicable sales
taxes, including county/municipality.
And Texas does levy sales taxes on shipping and delivery:
https://comptroller.texas.gov/taxes/sales/faq/collection.php
In Help, MrPetovan writes:
| It doesn't seem to be relevant to this Buyer account who's likely receiving
all their order at the same address, though.
|
|
|
|
Author: | peregrinator | Posted: | May 4, 2021 13:36 | Subject: | Re: overcharging sales tax | Viewed: | 45 times | Topic: | Help | |
|
| Ah - then I'll just note that the BL sales tax includes all applicable sales
taxes, including county/municipality.
And Texas does levy sales taxes on shipping and delivery:
https://comptroller.texas.gov/taxes/sales/faq/collection.php
In Help, MrPetovan writes:
| It doesn't seem to be relevant to this Buyer account who's likely receiving
all their order at the same address, though.
|
|
|
Author: | SylvainLS | Posted: | May 4, 2021 13:22 | Subject: | Re: Removing Permanent Marker | Viewed: | 50 times | Topic: | General | |
|
| In General, axaday writes:
| In General, BrickCollection writes:
| Hey everybody, I was wondering if anyone could tell me the best way to remove
the marker on these Clone Troopers that I recently purchased off eBay.
Thanks,
BrickCollection
|
After all of these replies you have to start wondering why they call it PERMANENT
marker.
|
Indeed
Apparently, it mostly means the ink is waterproof: https://en.wikipedia.org/wiki/Permanent_marker
(there’s also a “Removal” section in the article).
I guess it’s why marketers are paid the big bucks.
|
|
Author: | MrPetovan | Posted: | May 4, 2021 13:22 | Subject: | Re: overcharging sales tax | Viewed: | 42 times | Topic: | Help | |
|
| It doesn't seem to be relevant to this Buyer account who's likely receiving
all their order at the same address, though.
In Help, peregrinator writes:
| In Help, rocket951 writes:
| I noticed on several of my orders that while the sales tax on the order information
page says "Texas Sales Tax", the rate is higher than the maximum Texas sales
tax including all applicable local taxes. The effective tax charged approaches
1% too much. If the intent is to charge only state sales tax (excluding county
and city), then the charges approach a 3% overage.
Is this a mistake or if not, what is the rationale for the overcharge?
|
The sales tax does indeed differ according to county/municipality.
|
|
|
Author: | peregrinator | Posted: | May 4, 2021 13:20 | Subject: | Re: overcharging sales tax | Viewed: | 45 times | Topic: | Help | |
|
| In Help, rocket951 writes:
| I noticed on several of my orders that while the sales tax on the order information
page says "Texas Sales Tax", the rate is higher than the maximum Texas sales
tax including all applicable local taxes. The effective tax charged approaches
1% too much. If the intent is to charge only state sales tax (excluding county
and city), then the charges approach a 3% overage.
Is this a mistake or if not, what is the rationale for the overcharge?
|
The sales tax does indeed differ according to county/municipality.
|
|
Author: | yorbrick | Posted: | May 4, 2021 13:11 | Subject: | Re: Help ID - Brown legs, hips Red, gray print | Viewed: | 26 times | Topic: | Catalog Identification | |
|
| In Catalog Identification, Super_G writes:
| Looking for help identifying the minifig these legs belong to ... I searched
all of Bricklink and Brick Owl databases without finding it. There is a "Lego"
stamp on the top between the posts.
The legs and hips are brown with leather armour and rivets, a gray shirt or armour
underneath, with dark red on the knees.
Most likely from the last 10 years - I typically have star wars, chima, ninjago,
nexo, lego movie, collectable minifigs or city.
|
Uruk-hai from LOTR.
|
|
Author: | tonnic | Posted: | May 4, 2021 13:10 | Subject: | Re: Help ID - Brown legs, hips Red, gray print | Viewed: | 34 times | Topic: | Catalog Identification | |
|
| In Catalog Identification, Super_G writes:
| Looking for help identifying the minifig these legs belong to ... I searched
all of Bricklink and Brick Owl databases without finding it. There is a "Lego"
stamp on the top between the posts.
The legs and hips are brown with leather armour and rivets, a gray shirt or armour
underneath, with dark red on the knees.
Most likely from the last 10 years - I typically have star wars, chima, ninjago,
nexo, lego movie, collectable minifigs or city.
|
|
|
Author: | Super_G | Posted: | May 4, 2021 13:02 | Subject: | Help ID - Brown legs, hips Red, gray print | Viewed: | 84 times | Topic: | Catalog Identification | |
|
| Looking for help identifying the minifig these legs belong to ... I searched
all of Bricklink and Brick Owl databases without finding it. There is a "Lego"
stamp on the top between the posts.
The legs and hips are brown with leather armour and rivets, a gray shirt or armour
underneath, with dark red on the knees.
Most likely from the last 10 years - I typically have star wars, chima, ninjago,
nexo, lego movie, collectable minifigs or city.
|
|
|
Author: | MrPetovan | Posted: | May 4, 2021 12:55 | Subject: | Re: overcharging sales tax | Viewed: | 44 times | Topic: | Help | |
|
| Do you know if Texas sales tax applies to shipping as well? You might be using
he wrong order total (with shipping vs without) to recalculate the sales tax.
In Help, rocket951 writes:
| I noticed on several of my orders that while the sales tax on the order information
page says "Texas Sales Tax", the rate is higher than the maximum Texas sales
tax including all applicable local taxes. The effective tax charged approaches
1% too much. If the intent is to charge only state sales tax (excluding county
and city), then the charges approach a 3% overage.
Is this a mistake or if not, what is the rationale for the overcharge?
|
|
|
Author: | Turez | Posted: | May 4, 2021 12:54 | Subject: | Re: Pending approval: mineravager01 | Viewed: | 51 times | Topic: | Catalog | |
|
| In Catalog, Leftoverbricks writes:
| In Catalog, Leftoverbricks writes:
| Can I help the inventory/catalog admin with this part?
|
Bumping this because I got no reply on my previous post. A newish user reserved
this part mineavager01 six weeks ago. It still has the status of 'pending'.
|
Um, no.
https://www.bricklink.com/catalogListOld.asp?invPend=Y
I don't see anything that would prevent you from submitting the inventory.
| I would like to know if there's as problem with this part that prohibits
the inventory admins from adding it.
In general I know quite a bit about Minecraft in general and have successfully
contributed a couple of the brick built animals to the catalogue so far .
Ask me, I gladly help!
FYI: Here's a knolling picture of this part which I used to build it.
|
|
|
Author: | MrPetovan | Posted: | May 4, 2021 12:54 | Subject: | Re: Multiple emails? | Viewed: | 26 times | Topic: | Help | |
|
| In your email client, you can configure automatic forwarding based on filters.
The filter would select the emails pertaining to new orders and the forwarding
would be to your partner's email address.
In Help, batman11223 writes:
| Hello,
Is there any way to have the new order notifications emailed to 2 separate email
accounts instead of just one? I would like my partner to receive the emails as
well.
Thankyou
|
|
Author: | Cob | Posted: | May 4, 2021 12:53 | Subject: | Re: Removing Permanent Marker | Viewed: | 36 times | Topic: | General | |
|
| In General, BrickCollection writes:
| Hey everybody, I was wondering if anyone could tell me the best way to remove
the marker on these Clone Troopers that I recently purchased off eBay.
Thanks,
BrickCollection
|
Windex
|
Author: | batman11223 | Posted: | May 4, 2021 12:48 | Subject: | Multiple emails? | Viewed: | 89 times | Topic: | Help | |
|
| Hello,
Is there any way to have the new order notifications emailed to 2 separate email
accounts instead of just one? I would like my partner to receive the emails as
well.
Thankyou
|
Author: | rocket951 | Posted: | May 4, 2021 12:45 | Subject: | overcharging sales tax | Viewed: | 159 times | Topic: | Help | |
|
| I noticed on several of my orders that while the sales tax on the order information
page says "Texas Sales Tax", the rate is higher than the maximum Texas sales
tax including all applicable local taxes. The effective tax charged approaches
1% too much. If the intent is to charge only state sales tax (excluding county
and city), then the charges approach a 3% overage.
Is this a mistake or if not, what is the rationale for the overcharge?
|
|
Author: | Leftoverbricks | Posted: | May 4, 2021 12:42 | Subject: | Re: Pending approval: mineravager01 | Viewed: | 37 times | Topic: | Catalog | |
|
| In Catalog, Leftoverbricks writes:
| Can I help the inventory/catalog admin with this part?
|
Bumping this because I got no reply on my previous post. A newish user reserved
this part mineavager01 six weeks ago. It still has the status of 'pending'.
I would like to know if there's as problem with this part that prohibits
the inventory admins from adding it.
In general I know quite a bit about Minecraft in general and have successfully
contributed a couple of the brick built animals to the catalogue so far .
Ask me, I gladly help!
FYI: Here's a knolling picture of this part which I used to build it.
|
|
|
Author: | brac.brick | Posted: | May 4, 2021 12:42 | Subject: | Re: Removing Permanent Marker | Viewed: | 32 times | Topic: | General | |
|
| In General, BrickCollection writes:
| Hey everybody, I was wondering if anyone could tell me the best way to remove
the marker on these Clone Troopers that I recently purchased off eBay.
Thanks,
BrickCollection
|
I have had success using a dry-erase marker over the permanent marker - test
it out first on a brick or something you don't care about to see if it
works on these small parts. You color over the perm. marker with the dry erase
marker (like a big circle) so all is covered and then wipe with a cleaning wipe
(Clorox or Lysol) or a damp paper towel.
|
|
Author: | samsam2 | Posted: | May 4, 2021 12:29 | Subject: | Re: Inventory Change Request for Set 557-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, samsam2 writes:
| Please make changes to the following inventory:
* Change 1 Part Black {x77 String, Cord (Undetermined Type) to x77ac75 String, Cord Thin 75cm}
* Change 1 Part Red {3183 Plate, Modified 1 x 4 with Tow Ball Socket (Undetermined Socket Type) to 3183a Plate, Modified 1 x 4 with Tow Ball Socket, Long, 2 Slots (8mm Socket Length)}
Comments from Submitter:
parts still in sealed polybags, pics to follow
|
Only the parts at the bottom of the set picture are from open polybags, now in
zip bags, so I cant say for sure if the tires came separate from the wheels or
already together. If any other part variants need identifying, please let me
know.
|
|
|
Author: | PieterEd | Posted: | May 4, 2021 12:28 | Subject: | NEW LOTS ADDED | Viewed: | 50 times | Topic: | Selling | |
|
| Get them while it lasts |
Author: | samsam2 | Posted: | May 4, 2021 12:14 | Subject: | Inventory Change Request for Set 557-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {x77 String, Cord (Undetermined Type) to x77ac75 String, Cord Thin 75cm}
* Change 1 Part Red {3183 Plate, Modified 1 x 4 with Tow Ball Socket (Undetermined Socket Type) to 3183a Plate, Modified 1 x 4 with Tow Ball Socket, Long, 2 Slots (8mm Socket Length)}
Comments from Submitter:
parts still in sealed polybags, pics to follow
|
|
Author: | Jack.W11 | Posted: | May 4, 2021 12:06 | Subject: | Re: UP TO 80% SALE FOR LIMITED TIME ONLY | Viewed: | 81 times | Topic: | Sales | |
|
| In Sales, yorbrick writes:
| In Sales, Jack.W11 writes:
| In Sales, yorbrick writes:
| In Sales, Jabbz writes:
| In Sales, yorbrick writes:
Having messaged the seller, it is deliberate to limit the amount of sales they
take in.
|
Maybe it would be better to not advertise a sale daily!
|
If your not interested in the sale, please do not reply to the announcement,
it also says ‘see terms’ so if you are interested please see the terms.
|
I don't really see the point of advertising a sale daily then closing a shop
to limit the numbers of orders. So it is not a case of not going interested,
but not being able to see it.
|
If you are interested, shop is open now!
|
|
Author: | edeevo | Posted: | May 4, 2021 11:57 | Subject: | Re: Potential feedback due to Mail Theft | Viewed: | 75 times | Topic: | Help | |
|
| In Help, KitKat53 writes:
| I have discovered that 7 outgoing orders have possibly been stolen from my residential
mailbox. I have security, but the camera doesn't cover the mailbox area.
One customer in-particular is being very belligerent about not receiving his
order (over 400 pieces!).
I will have taken a big hit to my bottom line by the theft of those 7 orders,
and through no fault of my own, should I have to be the brunt of negative feedback?
He's already filing for a refund through PayPal, which is his right. What
are my options in this case?
I'm certainly not doing anymore business through my residential mailbox!!
I'll drive out of my way to go to the PO from now on!
|
I experienced this about six years ago when using a nearby drop box (it was a
standalone USPS box a few blocks from my house)... I had 4 packages go missing
(no scan, nothing; like they just disappeared)... after a few weeks of communicating
with each Buyer about whatever status I had at the moment, I decided it would
be best to just accept the loss and issue them each a full refund for the orders
(even though the orders totaled over $200), I felt strongly that I couldn't
punish them for packages going missing or being stolen (and I know I'd appreciate
the gesture if I was in the Buyers' shoes)... which in many ways turned out
for the better, because each of those Buyers has been a repeat Buyer multiple
times in the years since...
It was only a few months after I had issued the refunds that I found out that
the particular drop box I had been using was consistently being broken in to
and I was lucky that I only had 4 packages go missing in the 2+ years I'd
been using it... and it was just over a year after that experience that the USPS
decided to simply remove that drop box permanently (I'm guessing too many
complaints about stolen packages), and I have been dropping off my packages at
the Post Office ever since with none going missing...
Life is Good.
~Ed.
|
|
Author: | Andrsv | Posted: | May 4, 2021 11:53 | Subject: | Re: email confirmation | Viewed: | 32 times | Topic: | Help | |
|
| In Help, tatiana125 writes:
| Hello!
I just registered and wanted to buy parts. My mail is already confirmed, and
when I get a new mail to confirm it, clicking the link leads to this message:
This account has already been verified
But still, when I go to my cart and want to check out, it says:
Your email address is not confirmed yet
What can I do to resolve this?
|
Maybe something is stuck in your local cache. Try CTRL+F5 to force reload page
content
|
|
Author: | magicalbricks24 | Posted: | May 4, 2021 11:43 | Subject: | Re: Potential feedback due to Mail Theft | Viewed: | 47 times | Topic: | Help | |
|
| In Help, KitKat53 writes:
| I have discovered that 7 outgoing orders have possibly been stolen from my residential
mailbox. I have security, but the camera doesn't cover the mailbox area.
One customer in-particular is being very belligerent about not receiving his
order (over 400 pieces!).
I will have taken a big hit to my bottom line by the theft of those 7 orders,
and through no fault of my own, should I have to be the brunt of negative feedback?
He's already filing for a refund through PayPal, which is his right. What
are my options in this case?
I'm certainly not doing anymore business through my residential mailbox!!
I'll drive out of my way to go to the PO from now on
|
Sorry to hear about this! Maybe ask your neighbors if they have any cameras/Ring
doorbells...
One other tip for sellers, always ask for a receipt when taking packages to the
Post Office. I once had a package's tracking glitch and keep showing as "USPS
Awaiting Item". If you have the receipt for PayPal, then it proves that the package
was in, or was lost while in the hands of the USPS. It is sad the lengths people
will go through to try to rob someone of something...
|
|
Author: | Cob | Posted: | May 4, 2021 11:34 | Subject: | Re: Potential feedback due to Mail Theft | Viewed: | 52 times | Topic: | Help | |
|
| In Help, cosmicray writes:
| In Help, KitKat53 writes:
| I have discovered that 7 outgoing orders have possibly been stolen from my residential
mailbox. I have security, but the camera doesn't cover the mailbox area.
One customer in-particular is being very belligerent about not receiving his
order (over 400 pieces!).
I will have taken a big hit to my bottom line by the theft of those 7 orders,
and through no fault of my own, should I have to be the brunt of negative feedback?
He's already filing for a refund through PayPal, which is his right. What
are my options in this case?
I'm certainly not doing anymore business through my residential mailbox!!
I'll drive out of my way to go to the PO from now on!
|
If you have more than 5 outgoing packages, the mail carrier is not supposed to
do an acceptance scan. 5 is the most they will scan, and none get scanned if
you have more than 5. Once they get them back to the post office, they will not
be scanned there either. They should begin appearing on tracking once they pass
thru an NDC sorter.
You have two options, one is to generate all your postage using PayPal Multi-Order
Shipping, and generate a SCAN form. The mail carrier will scan the SCAN form,
and then click YES, the number of packages is correct. Doing the SCAN form indirectly
causes all the packages to be acceptance scanned. The other option is to take
them to the post office, and ask a retail counter clerk to do a 'Pre-Paid
Acceptance Scan'.
Nita Rae
|
This is great information, I never understood the purpose of a scan form until
now.
Thank you!
|
|
Author: | yorbrick | Posted: | May 4, 2021 11:25 | Subject: | Re: UP TO 80% SALE FOR LIMITED TIME ONLY | Viewed: | 64 times | Topic: | Sales | |
|
| In Sales, Jack.W11 writes:
| In Sales, yorbrick writes:
| In Sales, Jabbz writes:
| In Sales, yorbrick writes:
Having messaged the seller, it is deliberate to limit the amount of sales they
take in.
|
Maybe it would be better to not advertise a sale daily!
|
If your not interested in the sale, please do not reply to the announcement,
it also says ‘see terms’ so if you are interested please see the terms.
|
I don't really see the point of advertising a sale daily then closing a shop
to limit the numbers of orders. So it is not a case of not going interested,
but not being able to see it.
|
|
Author: | DarthRaynor | Posted: | May 4, 2021 11:23 | Subject: | Inventory Change Request for Set 7258-1 | Viewed: | 31 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 4623 Dark Bluish Gray Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length)
* Add 2 Part 4623a Dark Bluish Gray Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)
Comments from Submitter:
I own the set and kept it built since I bought it. Just recently disassembled it for storage and using BL inventory to ensure I have all parts.
Additional details about this set inventory:
It has eight Light Bluish Gray 32064c instead of eight Light Bluish Gray 32064.
|
|
Author: | cosmicray | Posted: | May 4, 2021 10:56 | Subject: | Re: Potential feedback due to Mail Theft | Viewed: | 61 times | Topic: | Off Topic | |
|
| In Help, MKRacing66 writes:
=Imagine 2 guys in federal prison. One says "how much time are you doing?" answer:
| "10 years". first guy "so am I...I assaulted a federal agent...what did you do?"
other guy: "stole some Legos from a mailbox"
|
Which is where we segue into Alice's Restaurant, and the bit where the various
felons are sitting on the bench, and they ask Arlo what he did and he responded
with "littering" ... and they all moved away from him
Nita Rae
|
|
Author: | DennisNilsen | Posted: | May 4, 2021 10:34 | Subject: | Re: Flat Tile 1x1 silver | Viewed: | 60 times | Topic: | Help | |
|
| In Help, TechnicBuilt writes:
| In Help, DennisNilsen writes:
| Hi eveyryone.
I have bought Nasa space shuttle Discovery 10283. When i build it and reached
to the lamps in the cargo romm one of the flat tiles 1x1 silver was different
from the other ones as you can see on my uploaded image. There was 5 pieces in
the bag. Is that normal or do I have a brick that is made wrong?? Hope you understand
my english
Hope someone can help me with an answer
Dennis
|
Looks to me that when Lego printed the tile the print was off.
You can likely request a replacement tile from Lego if it is a new set.
Also hold on to the mis-printed tile. Misprinted items can sometimes be worth
more money. (Although for a tile likely not)
|
Perfekt, thanks for your help
|
|
Author: | starbeanie | Posted: | May 4, 2021 10:34 | Subject: | Re: What's this part in 42113? | Viewed: | 63 times | Topic: | My Own Creation | |
|
| it's a fun set to build.
In My Own Creation, tec writes:
| Nice addition. I would dig into pages to get ideas. Thanks a lot
In My Own Creation, starbeanie writes:
|
|
Author: | tec | Posted: | May 4, 2021 10:28 | Subject: | Re: What's this part in 42113? | Viewed: | 48 times | Topic: | My Own Creation | |
|
| Nice addition. I would dig into pages to get ideas. Thanks a lot
In My Own Creation, starbeanie writes:
|
|
Author: | StephenB76 | Posted: | May 4, 2021 10:24 | Subject: | Re: Free lego. | Viewed: | 98 times | Topic: | LEGO products | |
|
| In LEGO, StephenB76 writes:
| In LEGO, Yoyakumo writes:
| English:
I have a large collection of color sorted lego aswell as some unsorted lego that
i am looking to get rid of. I dont think it will sell on my store so i wanted
to reach out and see if anyone wanted it.
Color sorted lego in the shoe boxes and unsorted in the big box.
I am in Belgium, contact me if you are interested.
French:
J'ai beaucoup de lego que je ne veut plus. Y a t'il quelqu'un qui
le veut? J'ai des boites a chausure replis de lego trié par couleur et une
grande boite mélanger.
Je suis en Belgique, contacté-moi si vous êtes intéressé.
|
It would probably be useful for me as am working with the mental health charity
mind, here is a link to some of the work we are doing Lego robot created for
West Sussex Mind’s mental health mission touring schools | Worthing Herald
I am hoping that we might be able to get the set to be made by Lego as well
|
https://www.worthingherald.co.uk/health/lego-robot-created-for-west-sussex-minds-mental-health-mission-touring-schools-3210852
hopefully working link now
|
|
Author: | StephenB76 | Posted: | May 4, 2021 10:21 | Subject: | Re: Free lego. | Viewed: | 64 times | Topic: | LEGO products | |
|
| In LEGO, Yoyakumo writes:
| English:
I have a large collection of color sorted lego aswell as some unsorted lego that
i am looking to get rid of. I dont think it will sell on my store so i wanted
to reach out and see if anyone wanted it.
Color sorted lego in the shoe boxes and unsorted in the big box.
I am in Belgium, contact me if you are interested.
French:
J'ai beaucoup de lego que je ne veut plus. Y a t'il quelqu'un qui
le veut? J'ai des boites a chausure replis de lego trié par couleur et une
grande boite mélanger.
Je suis en Belgique, contacté-moi si vous êtes intéressé.
|
It would probably be useful for me as am working with the mental health charity
mind, here is a link to some of the work we are doing Lego robot created for
West Sussex Mind’s mental health mission touring schools | Worthing Herald
I am hoping that we might be able to get the set to be made by Lego as well
|
|
Author: | Jack.W11 | Posted: | May 4, 2021 10:20 | Subject: | Re: UP TO 80% SALE FOR LIMITED TIME ONLY | Viewed: | 74 times | Topic: | Sales | |
|
| In Sales, Brickwilbo writes:
| In Sales, Jack.W11 writes:
| In Sales, yorbrick writes:
| In Sales, Jabbz writes:
| In Sales, yorbrick writes:
Having messaged the seller, it is deliberate to limit the amount of sales they
take in.
|
Maybe it would be better to not advertise a sale daily!
|
If your not interested in the sale, please do not reply to the announcement,
it also says ‘see terms’ so if you are interested please see the terms.
|
I also accept orders of €100 and under. 😉
Advertising sales with a closed store limits the potential visitors and sales.
|
Due to popular demand, JxCbrickz is open again while stock lasts! 80% off
|
|
Author: | tatiana125 | Posted: | May 4, 2021 10:16 | Subject: | email confirmation | Viewed: | 94 times | Topic: | Help | |
|
| Hello!
I just registered and wanted to buy parts. My mail is already confirmed, and
when I get a new mail to confirm it, clicking the link leads to this message:
This account has already been verified
But still, when I go to my cart and want to check out, it says:
Your email address is not confirmed yet
What can I do to resolve this?
|
|
Author: | tonnic | Posted: | May 4, 2021 10:12 | Subject: | Re: Free lego. | Viewed: | 64 times | Topic: | LEGO products | |
|
| In LEGO, Yoyakumo writes:
| English:
I have a large collection of color sorted lego aswell as some unsorted lego that
i am looking to get rid of. I dont think it will sell on my store so i wanted
to reach out and see if anyone wanted it.
Color sorted lego in the shoe boxes and unsorted in the big box.
I am in Belgium, contact me if you are interested.
French:
J'ai beaucoup de lego que je ne veut plus. Y a t'il quelqu'un qui
le veut? J'ai des boites a chausure replis de lego trié par couleur et une
grande boite mélanger.
Je suis en Belgique, contacté-moi si vous êtes intéressé.
|
Nice idea.
Have you ever thought about giving the Lego to a childrens unit in a hospital?
|
|
Author: | Hurt | Posted: | May 4, 2021 10:12 | Subject: | Re: Bags | Viewed: | 27 times | Topic: | Help | |
|
| In Help, Scooby2711 writes:
| What size bags do you recommend for mini figures ? Thank you
|
I use 60x80mm - you usually get 1.000 pieces for about EUR 10 to EUR 15
|
Author: | Nicolasamico37 | Posted: | May 4, 2021 09:55 | Subject: | Re: add phone to my personal informations | Viewed: | 26 times | Topic: | Help | |
|
| In Help, Turez writes:
Many Thanks !! That's done now
Have a nice day,
Nicolas
|
|
Author: | TechnicBuilt | Posted: | May 4, 2021 09:50 | Subject: | Re: Flat Tile 1x1 silver | Viewed: | 52 times | Topic: | Help | |
|
| In Help, DennisNilsen writes:
| Hi eveyryone.
I have bought Nasa space shuttle Discovery 10283. When i build it and reached
to the lamps in the cargo romm one of the flat tiles 1x1 silver was different
from the other ones as you can see on my uploaded image. There was 5 pieces in
the bag. Is that normal or do I have a brick that is made wrong?? Hope you understand
my english
Hope someone can help me with an answer
Dennis
|
Looks to me that when Lego printed the tile the print was off.
You can likely request a replacement tile from Lego if it is a new set.
Also hold on to the mis-printed tile. Misprinted items can sometimes be worth
more money. (Although for a tile likely not)
|
|
Author: | Cob | Posted: | May 4, 2021 09:42 | Subject: | Re: Bags | Viewed: | 32 times | Topic: | Help | |
|
| In Help, Scooby2711 writes:
| What size bags do you recommend for mini figures ? Thank you
|
2x3
|
Author: | peregrinator | Posted: | May 4, 2021 09:41 | Subject: | Re: Bags | Viewed: | 32 times | Topic: | Help | |
|
| In Help, Scooby2711 writes:
| What size bags do you recommend for mini figures ? Thank you
|
2"x2" for most (1.5"x2" can also work), 2"x3" or even 3"x3" for larger ones.
Best thing is to have a variety of small bags.
|
Author: | MadiganStation | Posted: | May 4, 2021 09:38 | Subject: | Re: Bags | Viewed: | 33 times | Topic: | Help | |
|
| 2x3 |
Author: | magicalbricks24 | Posted: | May 4, 2021 09:36 | Subject: | Re: Bags | Viewed: | 33 times | Topic: | Help | |
|
| In Help, Scooby2711 writes:
| What size bags do you recommend for mini figures ? Thank you
|
1.5 x 2 in. or 2 x 2 in for most small figures. I then take all of the individually
bagged minifigures and put them in one larger 4 x 6 bag for the order.
~Nicholas
magicalbricks24
|
Author: | Scooby2711 | Posted: | May 4, 2021 09:33 | Subject: | Bags | Viewed: | 168 times | Topic: | Help | |
|
| What size bags do you recommend for mini figures ? Thank you |
|
Author: | Jack.W11 | Posted: | May 4, 2021 09:31 | Subject: | Re: UP TO 80% SALE FOR LIMITED TIME ONLY | Viewed: | 69 times | Topic: | Sales | |
|
| In Sales, Brickwilbo writes:
| In Sales, Jack.W11 writes:
| In Sales, yorbrick writes:
| In Sales, Jabbz writes:
| In Sales, yorbrick writes:
Having messaged the seller, it is deliberate to limit the amount of sales they
take in.
|
Maybe it would be better to not advertise a sale daily!
|
If your not interested in the sale, please do not reply to the announcement,
it also says ‘see terms’ so if you are interested please see the terms.
|
I also accept orders of €100 and under. 😉
Advertising sales with a closed store limits the potential visitors and sales.
|
Yes you are correct, contact me if you are interested in the sale
|
|
Author: | DennisNilsen | Posted: | May 4, 2021 09:31 | Subject: | Flat Tile 1x1 silver | Viewed: | 94 times | Topic: | Help | |
|
| Hi eveyryone.
I have bought Nasa space shuttle Discovery 10283. When i build it and reached
to the lamps in the cargo romm one of the flat tiles 1x1 silver was different
from the other ones as you can see on my uploaded image. There was 5 pieces in
the bag. Is that normal or do I have a brick that is made wrong?? Hope you understand
my english
Hope someone can help me with an answer
Dennis
|
|
|
Author: | Blockdreams | Posted: | May 4, 2021 09:30 | Subject: | US Shop-175,000 Parts-10%-15% Off Quick Ship! | Viewed: | 55 times | Topic: | Sales | |
|
| Check us out, 175,000+ Pieces, parts and minifigs, we added 1000s of parts last
week and have more to add throughout the month!
All parts 15% off, all minifigs 10% off - Nothing held back!!
We can pull and ship most orders in 1 to 2 business days!
Thanks for shopping
|
Author: | dmodliba | Posted: | May 4, 2021 09:27 | Subject: | +++ Looney Tunes Minifigures +++ | Viewed: | 44 times | Topic: | Announce | |
|
| Hello dear Bricklink community,
I have just added a couple of 71030-2 (Complete Series of 12 minfigures) to my
inventory. Check it out!
Best regards,
DM-Bricks
|
|
Author: | Brickwilbo | Posted: | May 4, 2021 09:22 | Subject: | Re: UP TO 80% SALE FOR LIMITED TIME ONLY | Viewed: | 68 times | Topic: | Sales | |
|
| In Sales, Jack.W11 writes:
| In Sales, yorbrick writes:
| In Sales, Jabbz writes:
| In Sales, yorbrick writes:
Having messaged the seller, it is deliberate to limit the amount of sales they
take in.
|
Maybe it would be better to not advertise a sale daily!
|
If your not interested in the sale, please do not reply to the announcement,
it also says ‘see terms’ so if you are interested please see the terms.
|
I also accept orders of €100 and under. 😉
Advertising sales with a closed store limits the potential visitors and sales.
|
|
Author: | Yoyakumo | Posted: | May 4, 2021 09:21 | Subject: | Free lego. | Viewed: | 187 times | Topic: | LEGO products | |
|
| English:
I have a large collection of color sorted lego aswell as some unsorted lego that
i am looking to get rid of. I dont think it will sell on my store so i wanted
to reach out and see if anyone wanted it.
Color sorted lego in the shoe boxes and unsorted in the big box.
I am in Belgium, contact me if you are interested.
French:
J'ai beaucoup de lego que je ne veut plus. Y a t'il quelqu'un qui
le veut? J'ai des boites a chausure replis de lego trié par couleur et une
grande boite mélanger.
Je suis en Belgique, contacté-moi si vous êtes intéressé.
|
|
|
Author: | Jack.W11 | Posted: | May 4, 2021 09:09 | Subject: | Re: UP TO 80% SALE FOR LIMITED TIME ONLY | Viewed: | 75 times | Topic: | Sales | |
|
| In Sales, yorbrick writes:
| In Sales, Jabbz writes:
| In Sales, yorbrick writes:
Having messaged the seller, it is deliberate to limit the amount of sales they
take in.
|
Maybe it would be better to not advertise a sale daily!
|
If your not interested in the sale, please do not reply to the announcement,
it also says ‘see terms’ so if you are interested please see the terms.
|
|
Author: | BrickNet | Posted: | May 4, 2021 09:06 | Subject: | MAY THE 4TH BE WITH YOU SALE | Viewed: | 79 times | Topic: | Sales | |
|
| Happy Star Wars day!
10% Off all Star Wars minifigures and instructions today only.
All purchases will receive a Star Wars related minifigure accessory and a 10%
off coupon for future purchases.
-BrickNet
|
|
|
Author: | Allieoop | Posted: | May 4, 2021 09:06 | Subject: | Re: 15% Off All Star Wars Items Now Through May 5 | Viewed: | 22 times | Topic: | Sales | |
|
| Celebrate Star Wars Day with a bit of savings, these are the sets you're
looking for!
In Sales, Allieoop writes:
| Sale prices are still valid through May 5th. Stop by and have a look around!
In Sales, Allieoop writes:
| Now through May 5th, all Star Wars items are up to 15% off. Minifigures, sets,
minifigure parts and accessories, boxes, etc. are all on sale!
Looking for the Tatooine Homestead, Imperial Shuttle polybag, or the Star Wars
Celebration Darth Vader bust - these are in stock (for now)!
Stop by and have a look around and May the Force be with You, Always.
Allieoop Bricks & Figs
https://store.bricklink.com/Allieoop
|
|
|
|
Author: | yorbrick | Posted: | May 4, 2021 09:05 | Subject: | Re: UP TO 80% SALE FOR LIMITED TIME ONLY | Viewed: | 57 times | Topic: | Sales | |
|
| In Sales, Jabbz writes:
| In Sales, yorbrick writes:
Having messaged the seller, it is deliberate to limit the amount of sales they
take in.
|
Maybe it would be better to not advertise a sale daily!
|
|
Author: | Jabbz | Posted: | May 4, 2021 08:55 | Subject: | Re: UP TO 80% SALE FOR LIMITED TIME ONLY | Viewed: | 66 times | Topic: | Sales | |
|
| In Sales, yorbrick writes:
Having messaged the seller, it is deliberate to limit the amount of sales they
take in.
|
|
Author: | bricks2you | Posted: | May 4, 2021 08:55 | Subject: | 40321/40324 mispackaged | Viewed: | 67 times | Topic: | Off Topic | |
|
| I received a sealed set , and the outer bag is labeled 40321, .
No indication that the outer bag has been resealed.
Is this a normal issue for the monthly build series?
Jim
|
|
Author: | technoluddite | Posted: | May 4, 2021 08:45 | Subject: | < < < < 35% Off Entire Inventory > > > > | Viewed: | 68 times | Topic: | Sales | |
|
| 35% Off EVERYTHING IN MY INVENTORY
For examples, there are Thousands of Minifigure Parts and Accessories
in stock including:
Hundreds of different...
Torso Assemblies (plain and decorated)
Legs Assemblies (plain and decorated)
Matching and Loose Arms
Hands (in a rainbow of colours!)
Headgear
Headgear Accessories
Body Wear
Armor & Shields
Weapons
Utensils
Tools
Friends Accessories
Droid Body Parts
Scores of different Technic part available as well!
SPECIAL 75% OFF SALE ON NOW:
Large Figure parts, large sized Bionicle, Hero Factory and other misc. oversized
parts are on sale at 75% off to clear them out.
NB: Small parcel shipping rates will apply to these oversized parts.
Shipping Within Canada starts at $2.35 CAD
Shipping to USA starts at $8.00 CAD
Shipping Worldwide (Air Mail) starts at $9.00 CAD
|
|
Author: | yorbrick | Posted: | May 4, 2021 08:44 | Subject: | Re: UP TO 80% SALE FOR LIMITED TIME ONLY | Viewed: | 66 times | Topic: | Sales | |
|
| In Sales, Jabbz writes:
| In Sales, Jack.W11 writes:
| 80% sale extended see terms
|
Your store is closed
|
They were closed for their 70% sale: https://www.bricklink.com/message.asp?ID=1268698
And yesterday's 80% 12 hour only sale (despite being told about it): https://www.bricklink.com/message.asp?ID=1268962
And still closed for the new 80% limited time sale.
So maybe the discount will go even higher if they don't get any orders in
their closed store.
|
Author: | Jabbz | Posted: | May 4, 2021 08:37 | Subject: | Re: UP TO 80% SALE FOR LIMITED TIME ONLY | Viewed: | 61 times | Topic: | Sales | |
|
| In Sales, Jack.W11 writes:
| 80% sale extended see terms
|
Your store is closed
|
Author: | Jack.W11 | Posted: | May 4, 2021 08:36 | Subject: | UP TO 80% SALE FOR LIMITED TIME ONLY | Viewed: | 195 times | Topic: | Sales | |
|
| 80% sale extended see terms |
Author: | axaday | Posted: | May 4, 2021 08:32 | Subject: | Re: Removing Permanent Marker | Viewed: | 50 times | Topic: | General | |
|
| In General, BrickCollection writes:
| Hey everybody, I was wondering if anyone could tell me the best way to remove
the marker on these Clone Troopers that I recently purchased off eBay.
Thanks,
BrickCollection
|
After all of these replies you have to start wondering why they call it PERMANENT
marker.
|
|
Author: | brickstand | Posted: | May 4, 2021 08:15 | Subject: | CMF Looney Tunes for sale | Viewed: | 65 times | Topic: | Sales | |
|
| Dear all!
I'd like to inform you that you can buy CMF LT in my store, beside all other
parts and sets.
Don't forget the 50% discount on shipping price if you order is over 100
EUR and if it weighs under 1700 grams and If you choose Packagesender (EU) or
DHL (other countries).
Discount is not valid for Slovenia post.
Thank you!
Greetings from Slovenia.
Gregor
PS. If you'd like to be informed which set we just Parted out or which parts
are for sale in our store, what kind of discounts we're offering at the moment
and if we're having any prize game, please follow us on:
- Facebook: https://www.facebook.com/brickstandstore or
- Instagram: https://www.instagram.com/brickstandstore
|
|
|
Author: | vetpenza | Posted: | May 4, 2021 07:13 | Subject: | Sale! 60% Off !!! | Viewed: | 102 times | Topic: | Sales | |
|
| 💥Big May Sale💥 60% Off all parts !
Sale 60% off all parts / Sale 35% off all minifigs
Скидка 60 % на все детали магазина / 35% Скидка на все минифигурки
http://www.bricklink.com/store.asp?p=vetpenza
|
|
Author: | cosmicray | Posted: | May 4, 2021 06:27 | Subject: | Please add note to Gear/Case10 | Viewed: | 48 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
|
| Different examples of this item have been observed to have different weights.
The one I have here weighs 553.8 gms, while the original weight submission has
been reconfirmed at 570 gms. The two examples had different mold slot numbers,
but the same mold design ID. Suspected to be a design where precision (in wt
and dims) was less important.
Nita Rae
|
|
Author: | Daver | Posted: | May 4, 2021 06:12 | Subject: | Re: Problem with part out large set to inventory | Viewed: | 65 times | Topic: | LANG Nederlands | |
|
| In LANG Nederlands, Teup writes:
| In LANG Nederlands, BasKrie writes:
Is inderdaad al jarenlang een probleem, omdat het system op 20 jaar oude code
draait. Verwacht geen snelle oplossing, Bricklink is van het probleem op de hoogte
en het kan ze gewoon eigenlijk niks schelen. In gedeeltes doen is inderdaad de
beste oplossing.
|
Het is me duidelijk, kon hier geen oude topics van terug vinden.
Ga het in delen proberen.
Thnx voor de info
|
|
Author: | iprice | Posted: | May 4, 2021 06:06 | Subject: | Re: Removing Permanent Marker | Viewed: | 55 times | Topic: | General | |
|
| In General, BrickCollection writes:
| Hey everybody, I was wondering if anyone could tell me the best way to remove
the marker on these Clone Troopers that I recently purchased off eBay.
Thanks,
BrickCollection
|
Hairspray works wonders on permanent ink. Try it on a printed part you don't
want first though - just to make sure it doesn't pull off the print or damage
the piece.
|
Author: | tec | Posted: | May 4, 2021 05:43 | Subject: | Re: What's this part in 42113? | Viewed: | 62 times | Topic: | My Own Creation | |
|
| Wow, what a speedy answer. Thanks Admin
|
|
Author: | Turez | Posted: | May 4, 2021 05:40 | Subject: | Re: Pirate head 3626apb05 | Viewed: | 40 times | Topic: | Problem | |
|
| In Problem, Lamondera writes:
| Hello! I have a couple of these heads, one from pi064 probably (Harbor Sentry).
The thing is that the pattern looks brown, not dark red, and it's solid stud.
In the inventory it doesn't refer to any mf, any suggestion?
Could that be a mistake in the inventory?
Thanks!
|
See the inventory note at the bottom of the inventory:
"Early copies of this minifigure would have had a solid stud head."
(This is a workaround as minifigure inventories cannot have alternate parts.)
And there is also a note on this entry regarding the color:
"The pattern color on this head varies from brown to dark red as can be seen
in the additional images."
|
|
Author: | Turez | Posted: | May 4, 2021 05:32 | Subject: | Re: What's this part in 42113? | Viewed: | 63 times | Topic: | My Own Creation | |
|
| In My Own Creation, tec writes:
| That smooth ring part, in orange too!!!
before the blades, e.g. between the blades and motor.
What's that?
|
|
Author: | BricksOfMarcel | Posted: | May 4, 2021 05:28 | Subject: | up to 50% sale on thenew roadplates and items | Viewed: | 57 times | Topic: | Sales | |
|
| ip to 50% sale opn new roadplates |
Author: | tec | Posted: | May 4, 2021 05:27 | Subject: | What's this part in 42113? | Viewed: | 140 times | Topic: | My Own Creation | |
|
| That smooth ring part, in orange too!!!
before the blades, e.g. between the blades and motor.
What's that?
PS: Please don't tell me "input 42113-1 in the search box". OT warning.
|
|
Author: | StolperStein | Posted: | May 4, 2021 05:00 | Subject: | May the 4th be with you! | Viewed: | 73 times | Topic: | Sales | |
|
| 20% on Star Wars Minifigs Today only! |
|
Author: | yorbrick | Posted: | May 4, 2021 04:50 | Subject: | Re: Pirate head 3626apb05 | Viewed: | 23 times | Topic: | Problem | |
|
| In Problem, yorbrick writes:
| In Problem, Lamondera writes:
| Hello! I have a couple of these heads, one from pi064 probably (Harbor Sentry).
The thing is that the pattern looks brown, not dark red, and it's solid stud.
In the inventory it doesn't refer to any mf, any suggestion?
Could that be a mistake in the inventory?
Thanks!
|
Solid vs other studs is a mess, as they were handled badly in the past. Colours
may well be off too, as printing over other colours depends on the base colour.
If listing as part of a minifig, just note the stud type in your description.
|
Presumably it is this head:
And this minifigure:
Note the inventory page for that minifigure even states "Early copies of this
minifigure would have had a solid stud head." Minifigures cannot have alternative
parts, and so the solid stud version does not appear in any minifigures.
|
|
Author: | Andrsv | Posted: | May 4, 2021 04:09 | Subject: | Re: Pirate head 3626apb05 | Viewed: | 34 times | Topic: | Problem | |
|
| In Problem, Lamondera writes:
| Hello! I have a couple of these heads, one from pi064 probably (Harbor Sentry).
The thing is that the pattern looks brown, not dark red, and it's solid stud.
In the inventory it doesn't refer to any mf, any suggestion?
Could that be a mistake in the inventory?
Thanks!
|
Maybe this will help you find it http://avbricks.no/#/avSearch
|
|
Author: | pb_bricks | Posted: | May 4, 2021 04:00 | Subject: | SALE -30% TO -70% ON ALL PARTS | Viewed: | 65 times | Topic: | Sales | |
|
| -35% up to even -70% off on all parts!
40% off on all Star Wars Minifigs - 11x 501st battle pack (Set 75280)
parted out, 501st troopers are also 40% off!
5% to 10% off on all other Minifigures
Over 100 minifigs to choose from!
Over 13,000 parts in over 1500 lots to choose from!
Sealed sets & used sets also in stock!
International priority registered shipping starting at 21.50pln (approx 4.75
euro)
Sets parted out recently:
75810 - Stranger Things The Upside Down
60197 - Passenger Train
75280 - 501st Legion Clone Troopers
71735 - Tournament of Elements
70427 - Welcome to the Hidden Side
60256 - Racing Cars
75268 - Snowspeeder
21319 - F·R·I·E·N·D·S Central Perk
|
|
Author: | Teup | Posted: | May 4, 2021 03:50 | Subject: | Re: Problem with part out large set to inventory | Viewed: | 40 times | Topic: | LANG Nederlands | |
|
| In LANG Nederlands, BasKrie writes:
Is inderdaad al jarenlang een probleem, omdat het system op 20 jaar oude code
draait. Verwacht geen snelle oplossing, Bricklink is van het probleem op de hoogte
en het kan ze gewoon eigenlijk niks schelen. In gedeeltes doen is inderdaad de
beste oplossing.
|
|
Author: | yorbrick | Posted: | May 4, 2021 03:14 | Subject: | Re: Pirate head 3626apb05 | Viewed: | 36 times | Topic: | Problem | |
|
| In Problem, Lamondera writes:
| Hello! I have a couple of these heads, one from pi064 probably (Harbor Sentry).
The thing is that the pattern looks brown, not dark red, and it's solid stud.
In the inventory it doesn't refer to any mf, any suggestion?
Could that be a mistake in the inventory?
Thanks!
|
Solid vs other studs is a mess, as they were handled badly in the past. Colours
may well be off too, as printing over other colours depends on the base colour.
If listing as part of a minifig, just note the stud type in your description.
|
|
Author: | Lamondera | Posted: | May 4, 2021 03:04 | Subject: | Pirate head 3626apb05 | Viewed: | 96 times | Topic: | Problem | |
|
| Hello! I have a couple of these heads, one from pi064 probably (Harbor Sentry).
The thing is that the pattern looks brown, not dark red, and it's solid stud.
In the inventory it doesn't refer to any mf, any suggestion?
Could that be a mistake in the inventory?
Thanks!
|
Author: | StephenB76 | Posted: | May 4, 2021 02:46 | Subject: | Re: Removing Permanent Marker | Viewed: | 37 times | Topic: | General | |
|
| In General, BrickCollection writes:
| Hey everybody, I was wondering if anyone could tell me the best way to remove
the marker on these Clone Troopers that I recently purchased off eBay.
Thanks,
BrickCollection
|
I was able to get rid of some using toothpaste and toothbrush
|
Author: | yorbrick | Posted: | May 4, 2021 02:24 | Subject: | Re: Removing Permanent Marker | Viewed: | 47 times | Topic: | General | |
|
| In General, BrickCollection writes:
| Hey everybody, I was wondering if anyone could tell me the best way to remove
the marker on these Clone Troopers that I recently purchased off eBay.
Thanks,
BrickCollection
|
For general play use, as above, some rubbing alcohol. For display, buy new parts.
|
|
Author: | yorbrick | Posted: | May 4, 2021 02:22 | Subject: | Re: Help! Looking for minifigure w/ chainmail arm | Viewed: | 43 times | Topic: | Help | |
|
| In Help, robar writes:
| In Help, smaclaug writes:
| Has this ever happened to you? I had a minifigure with chain mail / scale mail
printed on the black / dark grey arms --- and now can't find it anywhere.
Do you know of a minifigure that has black or dark grey arms with chain mail
/ scale mail printed arms?
Likely a superhero figure or Ninjago.
Thanks!
|
here's some figs might help you
https://www.bricklink.com/v2/search.page?q=chain%20mail#T=M
|
As well as chain mail, if you are looking for similar designs it is also worth
searching scale mail and plate mail as these can be very similar. And due to
the new BF legs, chainmail as one word too.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|