Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | normann1974  | | Posted: | Apr 7, 2021 16:09 | | Subject: | Inventory Change Request for Set 10274-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Dark Bluish Gray {2458 Brick, Modified 1 x 2 with Pin to 44865 Brick, Modified 1 x 2 with Pin and Bottom Stud Holder}
Comments from Submitter:
I someone can confirm that the old variant came in this set, feel free to add it as an alternate. My set came with this new mold, and BL hans't identified it until now.
|
 |
| Author: | tpr | | Posted: | Apr 7, 2021 14:53 | | Subject: | Chrome Silver Legs - confirmation | | Viewed: | 111 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi
Can anyone confirm the base colour of the Hips and Legs that are Chrome Silver
Thanks
tpr
|
|
| Author: | 7StarMantis | | Posted: | Apr 7, 2021 13:57 | | Subject: | Rare Very Light Blue Gray in Set 10698-1 | | Viewed: | 114 times | | Topic: | Colors | | Status: | Open | |
|
| I found that the four 3005 light gray blocks in set 10698-1 that I got are unusually
light when compared to other blocks of supposedly the same color. The manual
lists these as the same as the other bricks in the set, but this is not the case.
In the photo I have attached, the window piece also came with the set. I have
attached other bricks for comparison as well.
I am not sure if this is intentional or a color error at the manufacturing plant,
but these bricks are lighter than the standard light blue gray.
This brick sells for $5 a piece for some reason in the color very light blue
gray. The current set inventory on here does not reflect the lighter color.
|
|
|
| Author: | randyf | | Posted: | Apr 7, 2021 11:30 | | Subject: | Inventory Change Request for Set 6837-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {6048 Arm Piece with Pin, 2 Fingers to 6048b Arm Piece with Pin, 2 Fingers and Finger Grooves}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
|
| Author: | msSquirrel | | Posted: | Apr 7, 2021 07:34 | | Subject: | Inventory Change Request for Set 9217-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 9 Part 76371 Red Duplo, Brick 1 x 2 x 2 with Bottom Tube (Alternate)
Comments from Submitter:
sealed set content
|
|
| Author: | axaday | | Posted: | Apr 7, 2021 05:40 | | Subject: | Inventory Change Request for Set 9794-3 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6048 Arm Piece with Pin, 2 Fingers to 6048b Arm Piece with Pin, 2 Fingers and Finger Grooves}
* Change 2 Part Black {4085b Plate, Modified 1 x 1 with U Clip Thin (Vertical Grip) to 4085c Plate, Modified 1 x 1 with U Clip Thick (Vertical Grip)}
Comments from Submitter:
Both of Jonas' notes on this set turned out right.
|
|
| Author: | randyf | | Posted: | Apr 6, 2021 23:53 | | Subject: | Inventory Change Request for Set 5972-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
|
| Author: | randyf | | Posted: | Apr 6, 2021 23:40 | | Subject: | Inventory Change Request for Set 5971-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Yellow {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
|
| Author: | randyf | | Posted: | Apr 6, 2021 23:29 | | Subject: | Inventory Change Request for Set 8091-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Dark Red {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part Light Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
|
| Author: | randyf | | Posted: | Apr 6, 2021 23:20 | | Subject: | Inventory Change Request for Set 7312-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628b Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Squared Pin Hole}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
|
| Author: | randyf | | Posted: | Apr 6, 2021 22:11 | | Subject: | Inventory Change Request for Set 6239-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Red {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
|
| Author: | randyf | | Posted: | Apr 6, 2021 21:42 | | Subject: | Inventory Change Request for Set 6873-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
|
| Author: | SezaR | | Posted: | Apr 6, 2021 16:25 | | Subject: | Inventory Change Request for Set 7862-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part x466 Light Gray Electric, Wire & Connector 12V / 4.5V with two Leads, unspecified length
* Delete 2 Part bb0081c01 Light Gray Electric, Wire & Connector Part 2-Way Male Squared Narrow Long without Center Post
* Change 1 Part Light Gray 766c190 Electric, Wire & Connector 12V / 4.5V with two 2-prong connectors, 190 Studs Long {Counterpart to Regular}
|
|
| Author: | randyf | | Posted: | Apr 6, 2021 15:53 | | Subject: | Inventory Change Request for Set 3807-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3713 Black Technic Bush (Extra)
* Add 1 Part 32062 Black Technic, Axle 2 Notched (Extra)
* Add 1 Part 6628b Black Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Squared Pin Hole (Extra)
* Add 1 Part 2780 Black Technic, Pin with Friction Ridges Lengthwise, Staggered, with or without Center Slots (Extra)
* Add 1 Part 32002 Dark Gray Technic, Pin 3/4 (Extra)
* Add 1 Part 3713 Light Gray Technic Bush (Extra)
* Add 1 Part 4265c Light Gray Technic Bush 1/2 Smooth (Extra)
* Add 1 Part 4274 Light Gray Technic, Pin 1/2 (Extra)
* Add 1 Part 3673 Light Gray Technic, Pin without Friction Ridges Lengthwise (Extra)
* Change {3 to 2} Part Black 3713 Technic Bush
* Change {21 to 20} Part Black 32062 Technic, Axle 2 Notched
* Change {3 to 2} Part Black 6628b Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Squared Pin Hole
* Change {17 to 16} Part Black 2780 Technic, Pin with Friction Ridges Lengthwise, Staggered, with or without Center Slots
* Change {3 to 2} Part Dark Gray 32002 Technic, Pin 3/4
* Change {3 to 2} Part Light Gray 3713 Technic Bush
* Change {7 to 6} Part Light Gray 4265c Technic Bush 1/2 Smooth
* Change {3 to 2} Part Light Gray 4274 Technic, Pin 1/2
* Change {7 to 6} Part Light Gray 3673 Technic, Pin without Friction Ridges Lengthwise
Comments from Submitter:
Breaking out extra arts according to the analysis here: https://www.bricklink.com/message.asp?ID=1264022
|
|
| Author: | razorflan | | Posted: | Apr 6, 2021 14:28 | | Subject: | Sticker part 2335pb164 sticker orientation | | Viewed: | 54 times | | Topic: | Catalog | | Status: | Open | |
|
| Set 70906 part 2335pb164 the sticker in the image for this part is applied incorectly.
Just check the image for set 70906 clips are at the top 'bang' 😲
|
|
|
| Author: | randyf | | Posted: | Apr 6, 2021 13:50 | | Subject: | Inventory Change Request for Set 75038-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 6 Part 44567a Light Bluish Gray Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove (match ID 3)
* Change 6 Part Light Bluish Gray 44567b Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove {Regular to Alternate} {match ID 0 to 3}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
|
| Author: | Turez | | Posted: | Apr 6, 2021 12:19 | | Subject: | Inventory Change Request for Set 10271-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part {Dark Tan to Medium Nougat} 87079pb904 Tile 2 x 4 with French and Danish Emblem, Black 'DANMARK', 'D' and Eiffel Tower Pattern (Sticker) - Set 10271 (Counterpart)
* Change 1 Part {Dark Tan to Medium Nougat} 87079pb903 Tile 2 x 4 with Heart Shaped Italian and Polish Flag and 'PL' Pattern (Sticker) - Set 10271 (Counterpart)
* Change 1 Part {Dark Tan to Medium Nougat} 87079pb902 Tile 2 x 4 with Swedish and Swiss Emblem and Black 'SWEDEN' Pattern (Sticker) - Set 10271 (Counterpart)
|
|
| Author: | samsam2 | | Posted: | Apr 6, 2021 10:24 | | Subject: | Inventory Change Request for Set 70355-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {44567 Hinge Plate 1 x 2 Locking with 1 Finger on Side (Undetermined Type) to 44567b Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove}
|
|
| Author: | DanielBuyBricks | | Posted: | Apr 6, 2021 03:55 | | Subject: | Inventory Change Request for Set 8987-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part {Flat Silver to Pearl Light Gray} 64308 Bionicle Weapon Vapor Trident
Comments from Submitter:
Color should be Pearl Light Gray and NOT Flat Silver. All pieces with silver from set on right side, and an assortment of Flat Silver pieces on left side for verification.
https://imgur.com/0jUEwM7
|
|
|
| Author: | Admin_Russell | | Posted: | Apr 6, 2021 01:30 | | Subject: | New Packing Dimensions Feature | | Viewed: | 321 times | | Topic: | Catalog | | Status: | Open | |
|
|
BrickLink
ID CardAdmin_Russell
|
Location:  USA, California |
| Member Since |
Contact |
Type |
Status |
| May 9, 2017 |
 |
Admin |
|
|
| BrickLink Administrator |
|
| We are pleased to announce that a major new feature was deployed to the catalog
today - Packing Dimensions!
We started a Packaging Dimensions Topic in the Forum in the Fall of 2017 so that
members could input dimensions to help Instant Checkout work properly. It was
only supposed to be a temporary solution, and it took a lot of time and dedication
for both contributors and admins to handle each request manually.
Now there is much better way - just input the data like you would any other catalog
data. Notice the upgrade to the Change Item form:
https://www.bricklink.com/catalogReq.asp?itemType=P
The first thing, though, that we want to tell you about this new feature is that
it's only a start. This is actually just phase 1 out of 3 phases. We did
it this way so we could get the basic functionality opened up as soon as possible.
This means that the Add Item form does not have Packing Dimensions input fields,
and we haven't touched the seller interface either which still shows millimeters
and only allows the upload of custom dimensions.
We are also a bit behind on the new Help Page:
https://www.bricklink.com/help.asp?helpID=2510
There are 4 areas we still need to tackle with the Help Page: Minifigures, Gear,
Books, and Catalogs. Those sections will be filled out over the next few days.
If you could please hold off on uploading dimensions for those Item Types until
the Help Pages are finished, it would be appreciated.
As you may have noticed, we changed the name from Packaging Dimensions to Packing
Dimensions. Let us know what you think and of course report any bugs. And there
is no need to post in the Packaging Dimensions Topic any more. We'll keep
it there for a while in case something happens to our new system, but when we
wrap up with phase 3, we will officially decommission that part of the Forum.
|
|
|
| Author: | samsam2 | | Posted: | Apr 6, 2021 00:42 | | Subject: | Inventory Change Request for Set 70314-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
sealed set unboxing Flickr https://www.flickr.com/photos/98579374@N03/albums/72157665707429491
|
|
| Author: | randyf | | Posted: | Apr 6, 2021 00:32 | | Subject: | Inventory Change Request for Set 8089-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Light Bluish Gray {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
|
| Author: | samsam2 | | Posted: | Apr 6, 2021 00:25 | | Subject: | Inventory Change Request for Set 41577-1 | | Viewed: | 13 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
sealed set, picture to follow
|
|
| Author: | randyf | | Posted: | Apr 6, 2021 00:12 | | Subject: | Inventory Change Request for Set 3557-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
|
| Author: | randyf | | Posted: | Apr 6, 2021 00:02 | | Subject: | Inventory Change Request for Set 3558-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
|
| Author: | samsam2 | | Posted: | Apr 5, 2021 23:55 | | Subject: | Inventory Change Request for Set 41510-1 | | Viewed: | 13 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 1 Part Black {44567 Hinge Plate 1 x 2 Locking with 1 Finger on Side (Undetermined Type) to 44567a Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove}
* Change 2 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
Comments from Submitter:
sealed set, picture to follow
|
|
| Author: | samsam2 | | Posted: | Apr 5, 2021 23:23 | | Subject: | Inventory Change Request for Set 41516-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 4 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth without Bottom Groove}
Comments from Submitter:
sealed set.
|
|
| Author: | samsam2 | | Posted: | Apr 5, 2021 21:51 | | Subject: | Inventory Change Request for Set 10215-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 17 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301a Hinge Plate 1 x 2 Locking with 1 Finger On End with Bottom Groove}
Comments from Submitter:
pic to follow.
|
|
| Author: | randyf | | Posted: | Apr 5, 2021 20:55 | | Subject: | Inventory Change Request for Set 6746-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628b Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Squared Pin Hole}
* Change 2 Part Black {2412 Tile, Modified 1 x 2 Grille (Undetermined Type) to 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip}
Comments from Submitter:
Member go4bob confirmed these variants from the sealed set used to submit the inventory change requests here: https://www.bricklink.com/message.asp?ID=1263137
|
|
| Author: | axaday | | Posted: | Apr 5, 2021 20:44 | | Subject: | Inventory Change Request for Set 9794-3 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part White {4032 Plate, Round 2 x 2 with Axle Hole to 4032b Plate, Round 2 x 2 with Axle Hole (x Shape)}
Comments from Submitter:
Sorting my set out, I found this error in the inventory build.
|
|
| Author: | axaday | | Posted: | Apr 5, 2021 16:35 | | Subject: | Inventory Change Request for Set 8487-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig crs073 Sarge (8487)
* Delete 2 Part 3795 Dark Bluish Gray Plate 2 x 6
* Delete 1 Part 3020 Sand Green Plate 2 x 4
* Delete 1 Part 3023 Medium Blue Plate 1 x 2
* Delete 1 Part 3022 Black Plate 2 x 2
* Delete 2 Part 2436 Sand Green Bracket 1 x 2 - 1 x 4
* Delete 1 Part 2431pb161 Sand Green Tile 1 x 4 with White Line with Black Curved Border Pattern
* Delete 2 Part 3020 Black Plate 2 x 4
* Delete 1 Part 60212 Sand Green Vehicle, Mudguard 2 x 4 with Arch Studded with Hole
* Delete 2 Part 3004pb103 Sand Green Brick 1 x 2 with Army Emblem on Dark Tan Background Pattern
* Delete 1 Part 93274 Sand Green Bracket 1 x 2 - 2 x 4
* Delete 2 Part 92280 Sand Green Plate, Modified 1 x 2 with Clip on Top
* Delete 1 Part 4528 Black Minifigure, Utensil Frying Pan
* Delete 1 Part 3069b Black Tile 1 x 2 with Groove
* Delete 2 Part 32028 Sand Green Plate, Modified 1 x 2 with Door Rail
* Delete 1 Part 3069bpb163 Sand Green Tile 1 x 2 with Groove with Black Grille Lines Thin with Light Bluish Gray Outline Pattern
* Delete 1 Part 4284 Dark Tan Windscreen 2 x 4 x 2 Inverted
* Delete 4 Part 3004 Dark Tan Brick 1 x 2
* Delete 2 Part 3678bpb029 Dark Tan Slope 65 2 x 2 x 2 with Bottom Tube with Brown Eye on White Background Rectangle Pattern
* Delete 1 Part 6179 Dark Tan Tile, Modified 4 x 4 with Studs on Edge
* Delete 2 Part 32028 Dark Tan Plate, Modified 1 x 2 with Door Rail
* Delete 4 Part 4624 Light Bluish Gray Wheel 8mm D. x 6mm
* Delete 4 Part 87414 Black Tire & Tread 15mm D. x 6mm Offset Tread Small - Band Around Center of Tread
* Change {3 to 1} Part Black 6157 Plate, Modified 2 x 2 with Wheels Holder Wide and Hole
* Change {6 to 4} Part Trans-Red 4073 Plate, Round 1 x 1
* Change {4 to 2} Part Trans-Clear 4073 Plate, Round 1 x 1
|
|
| Author: | sb87 | | Posted: | Apr 5, 2021 15:46 | | Subject: | Inventory Change Request for Set 6542-1 | | Viewed: | 187 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {10 to 9} Part Light Gray 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip
* Change {2 to 1} Part Red 3666 Plate 1 x 6
Comments from Submitter:
I have carefully studied the instructions for this set, and disassembled a built version, and believe that these are the correct quantities for these 2 pieces. Other websites (Brickset.com/Rebrickable.com/Peeron.com) also list these quantities, with the caveat that 1 of the originally 2 1x6 red plates may have been provided as an extra. I can't confirm that, but I can only find 1 in the instructions & build)
|
|
| Author: | axaday | | Posted: | Apr 5, 2021 15:21 | | Subject: | Inventory Change Request for Set 9485-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig crs070 Raoul ÇaRoule (9485)
* Delete 1 Part 3034 Tan Plate 2 x 8
* Delete 2 Part 6157 Black Plate, Modified 2 x 2 with Wheels Holder Wide and Hole
* Delete 6 Part 3022 Dark Bluish Gray Plate 2 x 2
* Delete 8 Part 4073 Yellow Plate, Round 1 x 1
* Delete 1 Part 60212 Red Vehicle, Mudguard 2 x 4 with Arch Studded with Hole
* Delete 2 Part 3024 Blue Plate 1 x 1
* Delete 1 Part 93274 Blue Bracket 1 x 2 - 2 x 4
* Delete 2 Part 54200 Trans-Red Slope 30 1 x 1 x 2/3
* Delete 2 Part 63868 Red Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
* Delete 2 Part 3023 Dark Azure Plate 1 x 2
* Delete 1 Part 2431pb208 Blue Tile 1 x 4 with 'WORLD GRAND PRIX' and French Flag Pattern
* Delete 1 Part 87079pb053L Blue Tile 2 x 4 with 'WGP 06' and 'allinol' Pattern Model Left Side
* Delete 1 Part 87079pb053R Blue Tile 2 x 4 with 'WGP 06' and 'allinol' Pattern Model Right Side
* Delete 1 Part 93591pb10 Blue Wedge 6 x 4 x 1 1/3 with 4 x 4 Base with Blue Eyes, Windows and Red and White Pattern
* Delete 1 Part 98835pb002 Dark Azure Vehicle, Mudguard 3 x 4 x 1 2/3 Curved Front with Headlights, 'GRC' and Smile Pattern (Raoul CaRoule) (9485)
* Delete 2 Part 30414 White Brick, Modified 1 x 4 with 4 Studs on 1 Side
* Delete 2 Part 3020 Blue Plate 2 x 4
* Delete 1 Part 98834pb01a Red Vehicle Spoiler 2 x 4 with Bar Handle with 'WORLD GRAND PRIX' Pattern
* Delete 4 Part 4624 White Wheel 8mm D. x 6mm
* Delete 4 Part 87414 Black Tire & Tread 15mm D. x 6mm Offset Tread Small - Band Around Center of Tread
|
|
| Author: | gunga | | Posted: | Apr 5, 2021 13:57 | | Subject: | What color is this gray? | | Viewed: | 154 times | | Topic: | Colors | | Status: | Open | |
|
| In a large box of loose LEGO, I came across several light gray pieces that I
can't identify the color of. They are from set 41154 and the only gray listed
in the inventory is LBG. The pieces in question are the 1x1 bricks as well as
the 1x2x5 bricks. For reference, the arch, 1x4, and 2x4 are light bluish gray.
The liftarm is very light bluish gray.
I know there is a variance in the light bluish gray, but this is a pretty dramatic
shade difference. And they ALL have the same shade, every 1x1 and 1x2x5. They
are LEGO pieces as I checked the studs and the logo is present.
Any ideas? Or have I overlooked something simple?
|
|
|
| Author: | axaday | | Posted: | Apr 5, 2021 13:42 | | Subject: | Inventory Change Request for Set 9485-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig crs069 Max Schnell (9485)
* Delete 2 Part 3023 Blue Plate 1 x 2
* Delete 4 Part 3710 Dark Bluish Gray Plate 1 x 4
* Delete 2 Part 4081b Black Plate, Modified 1 x 1 with Light Attachment - Thick Ring
* Delete 1 Part 3795 Green Plate 2 x 6
* Delete 4 Part 2420 Red Plate 2 x 2 Corner
* Delete 1 Part 60212 Dark Bluish Gray Vehicle, Mudguard 2 x 4 with Arch Studded with Hole
* Delete 1 Part 87079pb054L Dark Bluish Gray Tile 2 x 4 with 'WGP 4' and 'WORLD GRAND PRIX' Pattern Model Left Side
* Delete 1 Part 87079pb054R Dark Bluish Gray Tile 2 x 4 with 'WGP 4' and 'WORLD GRAND PRIX' Pattern Model Right Side
* Delete 1 Part 98835pb003 Dark Bluish Gray Vehicle, Mudguard 3 x 4 x 1 2/3 Curved Front with Headlights, Grille and Smile Pattern (Max Schnell) (9485)
* Delete 1 Part 93591pb11 Dark Bluish Gray Wedge 6 x 4 x 1 1/3 with 4 x 4 Base with Blue Eyes, Windows and Black, Red and Yellow Pattern
* Delete 2 Part 2436 White Bracket 1 x 2 - 1 x 4 (match ID 3)
* Delete 4 Part 3794a Yellow Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper) (match ID 2)
* Delete 2 Part 2420 Dark Bluish Gray Plate 2 x 2 Corner
* Delete 2 Part 3023 Trans-Red Plate 1 x 2
* Delete 1 Part 93274 Dark Bluish Gray Bracket 1 x 2 - 2 x 4
* Delete 2 Part 63868 Light Bluish Gray Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
* Delete 1 Part 98834pb01a Black Vehicle Spoiler 2 x 4 with Bar Handle with 'WORLD GRAND PRIX' Pattern
* Delete 4 Part 50945 Black Tire & Tread 14mm D. x 6mm Solid Smooth
* Delete 4 Part 93595 Light Bluish Gray Wheel 11mm D. x 6mm with 8 'Y' Spokes
* Change {4 to 2} Part Black 6157 Plate, Modified 2 x 2 with Wheels Holder Wide and Hole
* Change {2 to 1} Part Tan 3034 Plate 2 x 8
* Change {12 to 8} Part Black 4073 Plate, Round 1 x 1
* Change {6 to 4} Part Dark Bluish Gray 61409 Slope 18 2 x 1 x 2/3 with 4 Slots
|
|
|
| Author: | axaday | | Posted: | Apr 5, 2021 13:06 | | Subject: | Inventory Change Request for Set 8487-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig crs072 Fillmore (8487)
* Delete 1 Part 2420 Dark Bluish Gray Plate 2 x 2 Corner
* Delete 1 Part 4085d Black Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
* Delete 2 Part 60212 Light Aqua Vehicle, Mudguard 2 x 4 with Arch Studded with Hole
* Delete 2 Part 3001pb083 Light Aqua Brick 2 x 4 with Peace Symbol, Road, and Flowers Pattern
* Delete 1 Part 3009pb151 Light Aqua Brick 1 x 6 with 'PEACE' and Flower Pattern
* Delete 1 Part 3009pb153 Light Aqua Brick 1 x 6 with 'GROOVY', 'LOVE', Rainbow and Flower Pattern
* Delete 1 Part 93273pb001 Light Aqua Slope, Curved 4 x 1 Double with Mouth and '51237' License Plate Pattern (Fillmore)
* Delete 2 Part 3005 Light Aqua Brick 1 x 1
* Delete 2 Part 3003 White Brick 2 x 2
* Delete 2 Part 3710 Light Bluish Gray Plate 1 x 4
* Delete 2 Part 93274 Light Aqua Bracket 1 x 2 - 2 x 4
* Delete 1 Part 93604pb01 Light Aqua Wedge 3 x 4 x 2/3 Triple Curved with Half Open Eyes, Flowers, and Headlights Pattern (Fillmore)
* Delete 1 Part 86208 Dark Bluish Gray Minifigure, Utensil Space Gun / Torch - Without Grooves
* Delete 2 Part 2921 Light Aqua Brick, Modified 1 x 1 with Bar Handle
* Delete 2 Part 3009pb152 Light Bluish Gray Brick 1 x 6 with Recycling Phrases and Stars Pattern
* Delete 1 Part 3794a Light Aqua Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
* Delete 1 Part 2555 Dark Bluish Gray Tile, Modified 1 x 1 with Clip
* Delete 1 Part 3795 Light Aqua Plate 2 x 6
* Delete 4 Part 50945 Black Tire & Tread 14mm D. x 6mm Solid Smooth
* Delete 4 Part 93594 Flat Silver Wheel 11mm D. x 6mm with Smooth Hubcap
* Change {3 to 2} Part Dark Bluish Gray 3034 Plate 2 x 8
* Change {3 to 2} Part Black 3020 Plate 2 x 4
* Change {3 to 1} Part Light Bluish Gray 4600 Plate, Modified 2 x 2 with Wheels Holder
* Change {4 to 1} Part Medium Blue 3023 Plate 1 x 2
* Change {4 to 1} Part Light Aqua 2436 Bracket 1 x 2 - 1 x 4
* Change {3 to 1} Part Black 3022 Plate 2 x 2
* Change {8 to 2} Part Light Bluish Gray 3024 Plate 1 x 1
* Change {4 to 1} Part Light Aqua 93604 Wedge 3 x 4 x 2/3 Triple Curved
* Change {6 to 2} Part Light Aqua 85984 Slope 30 1 x 2 x 2/3
|
|
| Author: | normann1974 | | Posted: | Apr 5, 2021 12:27 | | Subject: | Inventory Change Request for Set 10274-1 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 44861 Dark Bluish Gray Plate, Modified 1 x 2 with Open O Clip on Top (Alternate) (match ID 5)
* Change 2 Part Dark Bluish Gray 92280 Plate, Modified 1 x 2 with Clip on Top {match ID 0 to 5}
* Change {1 to 2} Part Yellow 4073 Plate, Round 1 x 1 (Extra)
Comments from Submitter:
Found in sealed set.
|
|
| Author: | normann1974 | | Posted: | Apr 5, 2021 10:40 | | Subject: | Inventory Change Request for Set 10274-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Red {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Verified in sealed set.
|
|
| Author: | axaday | | Posted: | Apr 5, 2021 05:50 | | Subject: | Inventory Change Request for Set 8487-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig crs074 Lightning McQueen - Radiator Springs, Dark Bluish Gray 1x4 Plates Inside
|
|
| Author: | axaday | | Posted: | Apr 4, 2021 19:22 | | Subject: | Inventory Change Request for Set 9485-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig crs071 Forklift - Raoul ÇaRoul's Pit Crew (9485)
* Delete 2 Part 4600 Light Bluish Gray Plate, Modified 2 x 2 with Wheels Holder
* Delete 1 Part 4623b Red Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)
* Delete 1 Part 6215 Blue Slope, Curved 3 x 2 x 1 with Four Studs
* Delete 1 Part 3678bpb044 Blue Slope 65 2 x 2 x 2 with Bottom Tube with Green Eyes on White Background and Smile Pattern 1
* Delete 1 Part 2431 Blue Tile 1 x 4
* Delete 1 Part 93274 Red Bracket 1 x 2 - 2 x 4
* Delete 1 Part 44822 Dark Bluish Gray Hinge Tile 1 x 4 Locking Dual 1 Fingers on Top
* Delete 2 Part 44302a Dark Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove
* Delete 3 Part 4085c Black Plate, Modified 1 x 1 with U Clip Thick (Vertical Grip) (match ID 2)
* Delete 3 Part 4085d Black Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip) (Alternate) (match ID 2)
* Delete 2 Part 4528 Black Minifigure, Utensil Frying Pan
* Delete 1 Part 32028 Red Plate, Modified 1 x 2 with Door Rail
* Change {3 to 2} Part Blue 3020 Plate 2 x 4
* Change {5 to 4} Part Red 3021 Plate 2 x 3
* Change {4 to 2} Part Blue 3023 Plate 1 x 2
* Change {8 to 4} Part White 4624 Wheel 8mm D. x 6mm
* Change {8 to 4} Part Black 87414 Tire & Tread 15mm D. x 6mm Offset Tread Small - Band Around Center of Tread
|
|
| Author: | axaday | | Posted: | Apr 4, 2021 18:41 | | Subject: | Inventory Change Request for Set 8487-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig crs065 Lightning McQueen - Radiator Springs
* Delete 3 Part 3023 Yellow Plate 1 x 2
* Delete 1 Part 3795 Blue Plate 2 x 6
* Delete 1 Part 60470 Black Plate, Modified 1 x 2 with 2 U Clips (Horizontal Grip) (match ID 1)
* Delete 1 Part 60470b Black Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip) (Alternate) (match ID 1)
* Delete 1 Part 2431 Red Tile 1 x 4
* Delete 1 Part 48336 Red Plate, Modified 1 x 2 with Bar Handle on Side with Closed Ends
* Delete 1 Part 93590 Red Vehicle, Mudguard 2 x 4 with Headlights and Curved Fenders
* Delete 1 Part 93587pb01 Red Vehicle, Mudguard 3 x 4 x 1 2/3 Curved with Front with Headlights, Grille and 'Rust-eze' Pattern
* Delete 1 Part 93591pb01 Red Wedge 6 x 4 x 1 1/3 with 4 x 4 Base with Blue Eyes, Windows and '95' in White Circle Pattern
* Delete 4 Part 93593 Red Wheel 11mm D. x 6mm with 8 Spokes
* Delete 1 Part 87079pb029R Red Tile 2 x 4 with Lightning Bolt in Half Ellipse and '95' Pattern Model Right Side
* Delete 1 Part 87079pb029L Red Tile 2 x 4 with Lightning Bolt in Half Ellipse and '95' Pattern Model Left Side
* Delete 4 Part 3794a Black Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
* Delete 2 Part 2436 White Bracket 1 x 2 - 1 x 4
* Delete 2 Part 3023 Red Plate 1 x 2
* Change {3 to 2} Part Red 3034 Plate 2 x 8
* Change {5 to 3} Part Black 6157 Plate, Modified 2 x 2 with Wheels Holder Wide and Hole
* Change {9 to 7} Part Dark Bluish Gray 3710 Plate 1 x 4
* Change {8 to 4} Part Black 50945 Tire & Tread 14mm D. x 6mm Solid Smooth
Comments from Submitter:
I have seen precedent for putting different parts in inventory note. This car looks identical to the one in 8200-1, but it looks like the 3710 inside are DBG instead of LBG in this set.
|
|
| Author: | axaday | | Posted: | Apr 4, 2021 16:14 | | Subject: | Inventory Change Request for Set 9485-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 3 Part 2436 Red Bracket 1 x 2 - 1 x 4 (match ID 4)
* Delete 3 Part 2436b Red Bracket 1 x 2 - 1 x 4 with Rounded Corners (Alternate) (match ID 4)
* Delete 1 Part 93590 Red Vehicle, Mudguard 2 x 4 with Headlights and Curved Fenders
* Delete 1 Part 2431pb207 Red Tile 1 x 4 with 'KA-CIAO, FRANCESCO!' Pattern
* Delete 2 Part 3710 Yellow Plate 1 x 4
* Delete 4 Part 3794a Light Bluish Gray Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper) (match ID 5)
* Delete 4 Part 3794b Light Bluish Gray Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 5)
* Delete 1 Part 93587pb07 Red Vehicle, Mudguard 3 x 4 x 1 2/3 Curved with Front with Headlights, Thin Smile, Chin Dimple and 'PISTON CUP' Pattern
* Delete 1 Part 93591pb07 Red Wedge 6 x 4 x 1 1/3 with 4 x 4 Base with Blue Eyes on Narrow White Background, Windows and '95' Pattern
* Delete 1 Part 3023 Red Plate 1 x 2
* Delete 1 Part 2431pb165 Red Tile 1 x 4 with 'WORLD GRAND PRIX' Pattern
* Delete 4 Part 93595pb03 Red Wheel 11mm D. x 6mm with 8 'Y' Spokes with Black Outline Pattern
* Delete 1 Part 87079pb031L Red Tile 2 x 4 with Lightning, Exhaust Pipes and Offset '95' Pattern Model Left Side
* Delete 1 Part 87079pb031R Red Tile 2 x 4 with Lightning, Exhaust Pipes and Offset '95' Pattern Model Right Side
* Add 1 Minifig crs068 Lightning McQueen - Red, Piston Cup, Red and Black Wheels (9485)
* Change {3 to 2} Part Tan 3034 Plate 2 x 8
* Change {6 to 4} Part Black 6157 Plate, Modified 2 x 2 with Wheels Holder Wide and Hole
* Change {2 to 1} Part Green 3795 Plate 2 x 6
* Change {7 to 4} Part Blue 3023 Plate 1 x 2
* Change {4 to 2} Part Trans-Red 4073 Plate, Round 1 x 1
* Change {6 to 5} Part Red 3021 Plate 2 x 3
* Change {14 to 12} Part Black 4073 Plate, Round 1 x 1
* Change {8 to 4} Part Black 50945 Tire & Tread 14mm D. x 6mm Solid Smooth
|
|
| Author: | axaday | | Posted: | Apr 4, 2021 15:01 | | Subject: | Inventory Change Request for Set 8487-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 3021 Yellow Plate 2 x 3
* Delete 4 Part 3710 Blue Plate 1 x 4
* Delete 2 Part 2436 Light Bluish Gray Bracket 1 x 2 - 1 x 4
* Delete 2 Part 2431 Medium Blue Tile 1 x 4
* Delete 1 Part 93587pb04 Medium Blue Vehicle, Mudguard 3 x 4 x 1 2/3 Curved with Back with Taillights, Exhaust and '301PCE' License Plate Pattern
* Delete 1 Part 93587pb03 Medium Blue Vehicle, Mudguard 3 x 4 x 1 2/3 Curved with Front with Headlights, Thin Smile and Nose Pattern
* Delete 1 Part 93591pb03 Medium Blue Wedge 6 x 4 x 1 1/3 with 4 x 4 Base with Green Eyes, Windows and Rear Grille Pattern (Sally)
* Delete 1 Part 3031 Medium Blue Plate 4 x 4
* Add 1 Part 50945 Black Tire & Tread 14mm D. x 6mm Solid Smooth (Extra)
* Delete 4 Part 50944 Light Bluish Gray Wheel 11mm D. x 6mm with 5 Spokes
* Add 1 Minifig crs066 Sally Carrera
* Change {4 to 3} Part Dark Bluish Gray 3034 Plate 2 x 8
* Change {7 to 5} Part Black 6157 Plate, Modified 2 x 2 with Wheels Holder Wide and Hole
* Change {6 to 4} Part Medium Blue 3023 Plate 1 x 2
* Change {12 to 8} Part Black 50945 Tire & Tread 14mm D. x 6mm Solid Smooth
Comments from Submitter:
The bag containing Sally, Fillmore, and Sarge had one extra of the smooth tire.
|
|
| Author: | MattiaInge | | Posted: | Apr 4, 2021 12:25 | | Subject: | Inventory Change Request for Set 3432-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 3022 Red Plate 2 x 2 (Extra)
|
| Author: | MattiaInge | | Posted: | Apr 4, 2021 12:18 | | Subject: | Inventory Change Request for Set 3432-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3069b Red Tile 1 x 2 with Groove (Extra)
* Add 1 Part 2736 Light Gray Technic, Axle 1 with Tow Ball (Extra)
* Add 1 Part 43093 Blue Technic, Axle 1 with Pin with Friction Ridges Lengthwise (Extra)
* Add 1 Part 32062 Black Technic, Axle 2 Notched (Extra)
|
|
| Author: | axaday | | Posted: | Apr 4, 2021 12:13 | | Subject: | Inventory Change Request for Set 8200-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig crs065 Lightning McQueen - Radiator Springs
* Delete 4 Part 3794a Black Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
* Delete 1 Part 60470 Black Plate, Modified 1 x 2 with 2 U Clips (Horizontal Grip) (match ID 1)
* Delete 2 Part 6157 Black Plate, Modified 2 x 2 with Wheels Holder Wide and Hole
* Delete 4 Part 50945 Black Tire & Tread 14mm D. x 6mm Solid Smooth
* Delete 1 Part 3795 Blue Plate 2 x 6
* Delete 2 Part 3710 Light Bluish Gray Plate 1 x 4
* Delete 2 Part 3023 Red Plate 1 x 2
* Delete 1 Part 3034 Red Plate 2 x 8
* Delete 1 Part 48336 Red Plate, Modified 1 x 2 with Bar Handle on Side with Closed Ends
* Delete 1 Part 2431 Red Tile 1 x 4
* Delete 1 Part 87079pb029L Red Tile 2 x 4 with Lightning Bolt in Half Ellipse and '95' Pattern Model Left Side
* Delete 1 Part 87079pb029R Red Tile 2 x 4 with Lightning Bolt in Half Ellipse and '95' Pattern Model Right Side
* Delete 1 Part 93590 Red Vehicle, Mudguard 2 x 4 with Headlights and Curved Fenders
* Delete 1 Part 93587pb01 Red Vehicle, Mudguard 3 x 4 x 1 2/3 Curved with Front with Headlights, Grille and 'Rust-eze' Pattern
* Delete 1 Part 93591pb01 Red Wedge 6 x 4 x 1 1/3 with 4 x 4 Base with Blue Eyes, Windows and '95' in White Circle Pattern
* Delete 4 Part 93593 Red Wheel 11mm D. x 6mm with 8 Spokes
* Delete 2 Part 2436 White Bracket 1 x 2 - 1 x 4
* Delete 3 Part 3023 Yellow Plate 1 x 2
|
|
| Author: | go4bob | | Posted: | Apr 4, 2021 08:26 | | Subject: | Inventory Change Request for Set 6415-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 2447 Trans-Dark Blue Minifigure, Headgear Accessory Visor Standard (Extra)
|
| Author: | shiniz | | Posted: | Apr 4, 2021 03:29 | | Subject: | Process for make a new inventories | | Viewed: | 43 times | | Topic: | Inventories | | Status: | Open | |
|
| Hello,
I want to take inventory of a new set, freshly released. In this set there are
new parts and new minifigures not referenced in Bricklink. Do you know how to
proceed to carry out this inventory?
Thanks for your help
|
| Author: | roguemjr | | Posted: | Apr 4, 2021 01:46 | | Subject: | New entry??? | | Viewed: | 75 times | | Topic: | Catalog | | Status: | Open | |
|
| To whom it may concern:
Is it possible to create an assembly for the attached 1x6 yellow brick with driver
side sticker from set 5510-1? I see there is another assembly for another sticker
for this part. Or how should I list this part to found by people who may be
looking for it.
Thanks,
roguemjr
|
|
|
| Author: | randyipp | | Posted: | Apr 4, 2021 01:12 | | Subject: | Inventory Change Request for Set 70420-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 28621pb0003 Trans-Neon Green Minifigure, Head Alien Ghost with Yellowish Green Face, Bushy Eyebrows, Angry and Flames in Back Pattern - Vented Stud (Alternate) (match ID 943602)
Comments from Submitter:
31 Sealed sets - 6 sets contained vented stud.
|
|
| Author: | Greenbutterfly | | Posted: | Apr 4, 2021 00:48 | | Subject: | Wanted list uploads blocked by custom parts | | Viewed: | 54 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| I have a very, very large model of a cathedral. I originally designed it in LDD
18 years ago and now updating it in stud.io.
The cathedral has a balcony with railings. I've created a couple of custom
parts for the railings to fit around the columns... the presence of these railings
in my IO file blocks the upload to my wanted list because they are not genuine
parts available through BL.
I'd like to see those parts ignored... or at least an option to do so.
I know there's the workaround of going through the IO file and deleting them
to upload. But my file has over 46000 parts, these custom parts are embedded
several layers deep in multiple sub-sub-sub-models... which means they're
difficult to find because stud.io doesn't have a fully function find-replace
mechanism (I and plenty of others have requested it, and requested that it work
with sub-models as well as main model).
This is still a work in progress, so I'm not really wanting to delete them
because re-instating them is going to be a pain. Plus with the size of the model
stud.io doesn't behave quite as it should anyway because of all the memory
leaks in it (which is going to affect any attempt to copy-paste the file then
delete the custom parts in the copy)...
PS. I'm sure I've requested this before, but for the life of me cannot
find it. stud.io isn't the only thing with memory leaks 
|
|
| Author: | normann1974 | | Posted: | Apr 3, 2021 18:48 | | Subject: | Inventory Change Request for Set 8620-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 2715 White Technic, Figure Accessory Helmet (match ID 1)
* Delete 1 Part 2716 Trans-Clear Technic, Figure Accessory Helmet Visor (match ID 1)
* Change 1 Minifig {tech003 Technic Figure White Legs, White Top with Red Stripes Pattern, Blue Arms (Skier) to tech003a Technic Figure White Legs, White Top with Red Stripes Pattern, Blue Arms, White Helmet (Skier)}
Comments from Submitter:
The helmet and visor are now included in the minifig which now makes the alternate minifig make sense.
|
|
| Author: | randyf | | Posted: | Apr 3, 2021 17:42 | | Subject: | Inventory Change Request for Set 70725-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
* Change 4 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
|
| Author: | weblectricity | | Posted: | Apr 3, 2021 16:25 | | Subject: | inventory process | | Viewed: | 75 times | | Topic: | Inventories | | Status: | Open | |
|
| Hello,
I'd like to submit an inventory for a set that has not been inventoried yet.
It's a Lego Friends set, 41446. I've previously inventories a polybag
set, but this one is bigger.
I've browsed around the site but have not found answers to my questions,
though maybe I've missed something.
My questions:
1) There are 3 new minifigures. Do I have to first seperately submit the minifigures
to the catalog and wait for them to be approved before I can submit the set,
or can I just submit them with the set?
2) There's a sticker sheet. Again do I have to submit the sticker sheet seperately
or along with the set? Do I need to provide photos?
3) Do I have to provide photographs for the stickered parts/counterparts? I don't
want to apply the stickers.
Anyway, I'm off to opening the set and assembling the minifigs to take some
photos.
Thank you,
best,
Peter
|
|
| Author: | CapstoneBricks | | Posted: | Apr 3, 2021 13:16 | | Subject: | Refund | | Viewed: | 91 times | | Topic: | Inventories | | Status: | Open | |
|
| | When I issue a full refund does the inventory go back into my inventory automatically? |
|
| Author: | Emporiosa | | Posted: | Apr 3, 2021 09:02 | | Subject: | Add tax inclusive/exempt option on refund | | Viewed: | 82 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Had a thought about the previous discussion where it is quite confusing currently
for processing refunds for US states that have collected sales tax. As it stands,
the refund box has us enter an amount, and then below it calculates the amount
that will come from the seller/PayPal, and the amount from the taxes BrickLink
collected, so a seller has to know the rate of tax for the state of the buyer
and also include it in the total.
Suggestion:
-Beside the box where you enter the refund amount, include a "tax inclusive"
and "tax exclusive" radio button where the seller can select it.
This would allow sellers to not have to know the rate of state for the state
and manually calculate it by selecting "tax exclusive", meaning the calculation
below will take that amount, and ADD tax to the total (not as a % of the total
the seller put in).
But this also allows what Niek (qwertyboy) had suggested where if you want to
give a higher total amount, you can check tax inclusive so it'll act the
way that it's currently programmed.
|
|
| Author: | axaday | | Posted: | Apr 3, 2021 08:34 | | Subject: | Inventory Change Request for Set 3807-1 | | Viewed: | 13 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628b Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Squared Pin Hole}
|
|
| Author: | shiniz | | Posted: | Apr 3, 2021 07:33 | | Subject: | Inventory Change Request for Set 40145-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 3004pb222 Blue Brick 1 x 2 with White 'City', Red Car and Black Minifigure Silhouette Pattern (Sticker) - Set 40305 (Counterpart)
* Add 2 Part 3004pb221 Yellow Brick 1 x 2 with White 'Creator', Yellow House with Red Roof and Door on Black Baseplate Pattern (Sticker) - Set 40305 (Counterpart)
* Add 2 Part 3004pb224 Red Brick 1 x 2 with White 'Juniors', White Building with Red Door on Black Baseplate and Minifigure Silhouette Pattern (Sticker) - Set 40305 (Counterpart)
Comments from Submitter:
This parts are incluses in the set 40305-1
|
|
| Author: | Bricks2Love | | Posted: | Apr 3, 2021 06:35 | | Subject: | First Lego League set 9781 | | Viewed: | 46 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi,
Is here anybody how can help me wit more information about these first Lego league
set 9781.
Its in the time period of the rcx and it was a set from around the year 2000.
The content was 726 pcs.
I have the cover of the green box but cant find anything about it.
Kind regards Guido
|
|
|
| Author: | lmhansmangmail. | | Posted: | Apr 3, 2021 06:21 | | Subject: | what color is the 1x4 brick | | Viewed: | 150 times | | Topic: | Colors | | Status: | Open | |
|
| I got an 1x4 brick but i cannot find the satisfying color in the catalog. I would
say it is either medium brown or dark nougat both do not exist in the catalog
can someone help with identifying the color
the other colors on the picture are reddish brown (left crate) medium nougat
(right crate) and dark orange (slope)
|
|
|
| Author: | Ddriver | | Posted: | Apr 3, 2021 02:53 | | Subject: | tls095 Lego Employee, Kidsfest 2013 | | Viewed: | 84 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello,
On the article page of "TLS095 LEGO EMPLOYEE, MALE WITH Apron, Lego Store at
Kidsfest 2013" is a wrong picture where the Minifigur shows in the blister.
The picture with blister is from the "Creativity Tour 2014" and not from the
Kids Festival 2013.
The right picture is attached here.
Where can I report that because the user who does make the changes on the page
can not be notified by mail, as this user has blocked the mail?
Best regards Daniel.
|
|
|
| Author: | plast_ech | | Posted: | Apr 3, 2021 00:30 | | Subject: | Inventory Change Request for Set 71738-1 | | Viewed: | 34 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Flat Silver {30608 Minifigure, Hair Flat Top with Extended Sides to 25379 Minifigure, Hair Flat Top with Straight Even Sections}
Comments from Submitter:
Part 30608 is apparently no longer in production, having not appeared in a set since 2017. It was effectively replaced with part 25379. Having built set 71738 myself, I can confirm that this set includes the new hair piece and not the old one.
|
|
| Author: | axaday | | Posted: | Apr 2, 2021 21:23 | | Subject: | Inventory Change Request for Set 3807-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {1 to 2} Part Trans-Clear x165c05 Electric, Fiber Optics Cable 5L
Comments from Submitter:
Sealed set, pic to follow. This correction is not really "correct". I guess the instructions are on the CD-Rom, but this inventory (and 3808 too, I'll bet) is way over on part count because the extras are not broken out.
|
|
| Author: | axaday | | Posted: | Apr 2, 2021 18:43 | | Subject: | Inventory Change Request for Set 3807-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Black {6538 Technic, Connector Axle 2L (Ridged Undetermined Type) to 6538b Technic, Connector Axle 2L (Ridged with x Hole x Orientation)}
* Change 6 Part Pearl Light Gray {6538 Technic, Connector Axle 2L (Ridged Undetermined Type) to 6538b Technic, Connector Axle 2L (Ridged with x Hole x Orientation)}
Comments from Submitter:
Sealed set, pic following
|
|
| Author: | tbbarton | | Posted: | Apr 2, 2021 15:09 | | Subject: | Remove spellcheck from key search fields | | Viewed: | 79 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Spellcheck loves to tell you the game of a figure, part or code isn’t a word.
I assume the dictionary is local to devices so maybe don’t allow spellcheck to
overwrite key search fields?
|
|
| Author: | Stellar | | Posted: | Apr 2, 2021 11:37 | | Subject: | If color image exists add it co Known Colors | | Viewed: | 81 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| I know that suggesting new features might mean hitting a wall, but here we go.
As the Catalog Admins only accept pictures of items in colors that are not in
inventories if the part is in hand, then update the known colors list with this
data.
Also, this might tie with an update to be able to find parts that have a color
image from this page: https://www.bricklink.com/catalogColors.asp (now, if they
are not in a inventory they don't show up.)
And even further, show the selected color image not the standard one...
Hope this is read by a BL Dev someday 
|
|
| Author: | axaday | | Posted: | Apr 2, 2021 08:13 | | Subject: | Inventory Change Request for Set 71747-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 30374 Pearl Gold Bar 4L (Lightsaber Blade / Wand) (Extra)
Comments from Submitter:
This was my error
|
| Author: | go4bob | | Posted: | Apr 2, 2021 06:19 | | Subject: | Inventory Change Request for Set 6457-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4073 Trans-Neon Green Plate, Round 1 x 1 (Extra)
* Add 1 Part 4073 Trans-Red Plate, Round 1 x 1 (Extra)
* Add 1 Part 4592c02 White Antenna Small Base with Black Lever (Extra)
|
|
|
| Author: | gunga | | Posted: | Apr 1, 2021 19:56 | | Subject: | Inventory Change Request for Set 60192-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 93606pb125L Orange Slope, Curved 4 x 2 with Arctic Explorers Logo and Door Hatch Pattern Model Left Side (Sticker) - Set 60192 (Counterpart)
* Add 1 Part 93606pb125R Orange Slope, Curved 4 x 2 with Arctic Explorers Logo and Door Hatch Pattern Model Right Side (Sticker) - Set 60192 (Counterpart)
* Add 4 Part 93606pb126 Orange Slope, Curved 4 x 2 with Orange and White Danger Stripes and Door Hatch Pattern (Sticker) - Set 60192 (Counterpart)
* Add 1 Part 30387pb018 Light Bluish Gray Hinge Brick 1 x 4 Locking, 9 Teeth with '60192' Pattern on Both Sides (Stickers) - Set 60192 (Counterpart)
* Add 1 Part 30387pb019 Light Bluish Gray Hinge Brick 1 x 4 Locking, 9 Teeth with 'CAUTION' and Orange and White Danger Stripes Pattern on Both Sides (Stickers) - Set 60192 (Counterpart)
|
|
| Author: | go4bob | | Posted: | Apr 1, 2021 19:51 | | Subject: | Inventory Change Request for Set 6746-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3062b Black Brick, Round 1 x 1 Open Stud (Extra)
* Add 1 Part 471p01 White Minifigure, Headgear Accessory Plume Feathers with Clip and Black Tip Pattern (Extra)
|
| Author: | gunga | | Posted: | Apr 1, 2021 19:47 | | Subject: | Inventory Change Request for Set 76054-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 61678pb140 Dark Tan Slope, Curved 4 x 1 with 2 Silver Plates Pattern (Sticker) - Set 70654 (Counterpart)
|
| Author: | gunga | | Posted: | Apr 1, 2021 19:32 | | Subject: | Inventory Change Request for Set 41057-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 33243pb09L White Slope, Curved 3 x 1 x 2 with Stud with Horseshoes Pattern Model Left Side (Sticker) - Set 41057 (Counterpart)
|
|
| Author: | gunga | | Posted: | Apr 1, 2021 19:28 | | Subject: | Inventory Change Request for Set 70589-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 50950pb132L Black Slope, Curved 3 x 1 with Lava Pattern Model Left Side (Sticker) - Set 70589 (Counterpart)
* Add 1 Part 50950pb132R Black Slope, Curved 3 x 1 with Lava Pattern Model Right Side (Sticker) - Set 70589 (Counterpart)
|
|
| Author: | gunga | | Posted: | Apr 1, 2021 19:24 | | Subject: | Inventory Change Request for Set 60132-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 88930pb136 Yellow Slope, Curved 2 x 4 x 2/3 with Bottom Tubes with Red and White Danger Stripes and Electricity Danger Triangle Pattern (Sticker) - Set 60132 (Counterpart)
* Add 1 Part 93606pb127 Black Slope, Curved 4 x 2 with Electric Charge Point and Gas/Fuel Pump Pattern (Sticker) - Set 60132 (Counterpart)
|
|
| Author: | randyf | | Posted: | Apr 1, 2021 17:17 | | Subject: | Inventory Change Request for Set 10228-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 49 Part 3684 Black Slope 75 2 x 2 x 3 (Undetermined Stud Type) (match ID 2)
* Change 49 Part Black 3684c Slope 75 2 x 2 x 3 - Solid Studs {Alternate to Regular} {match ID 2 to 0}
* Change 1 Part Light Bluish Gray 3626bpb0779 Minifigure, Head Male Black Bushy Eyebrows, Sad Eyes with White Pupils, Cheek Lines Pattern - Blocked Open Stud (Alternate) {match ID 9 to 2}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets. The 3684c variant was added as an alternate one day after the inventory was approved (by our other current Inventory Admin). I think it is safe to say that the original inventory was incorrect concerning this part.
|
|
| Author: | axaday | | Posted: | Apr 1, 2021 15:50 | | Subject: | Inventory Change Request for Set 4594-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig rac089 Hot Arrow
* Add 1 Minifig rac088 Maverick Sprinter
* Delete 1 Part 2447 Black Minifigure, Headgear Accessory Visor Standard
* Delete 1 Part 2447 Trans-Light Blue Minifigure, Headgear Accessory Visor Standard
* Delete 1 Part 2446px5 Green Minifigure, Headgear Helmet Motorcycle (Standard) with Flames Yellow and Red Pattern
* Delete 1 Part 2446px5 White Minifigure, Headgear Helmet Motorcycle (Standard) with Flames Yellow and Red Pattern
* Delete 1 Part 41850 Yellow Body, Racers Driver
* Delete 1 Part 41850 Orange Body, Racers Driver
* Delete 1 Part 3626bpac Yellow Minifigure, Head Face Paint with Gray Stripes across Face Pattern (Achu) - Blocked Open Stud
* Delete 1 Part 3626bp7a Yellow Minifigure, Head Male Brown Hair over Eye and Black Eyebrows Pattern - Blocked Open Stud
|
|
| Author: | gunga | | Posted: | Apr 1, 2021 14:47 | | Subject: | Inventory Change Request for Set 8155-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 30602pb110 White Slope, Curved 2 x 2 Lip with Red Stripe and Letter B Pattern (Sticker) - Set 8155 (Counterpart)
* Add 1 Part 4215bpb57R Red Panel 1 x 4 x 3 - Hollow Studs with Ferrari Silver Horse on Red Background Pattern, Model Right (Sticker) - Sets 8153 / 8155 (Counterpart)
* Add 1 Part BA252pb01 Black Stickered Assembly 4 x 1 with 'www.ferrariworld.com' Pattern (Sticker) - Set 8155 - 2 Plate, Modified 1 x 2 with Door Rail (Counterpart)
* Add 1 Part 3008pb169 Light Bluish Gray Brick 1 x 8 with Ferrari Logo and Black 'SCUDERIA FERRARI' on Red Background Pattern (Sticker) - Set 8155 (Counterpart)
|
|
| Author: | gunga | | Posted: | Apr 1, 2021 14:34 | | Subject: | Inventory Change Request for Set 8864-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3039pb136 Tan Slope 45 2 x 2 with Black Number 1 on White Background Pattern (Sticker) - Set 8864 (Counterpart)
|
| Author: | gunga | | Posted: | Apr 1, 2021 14:27 | | Subject: | Inventory Change Request for Set 76129-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 3039pb138 Dark Turquoise Slope 45 2 x 2 with 'FLOREA'S CAFE' and Cups Pattern (Sticker) - Set 76129 (Counterpart)
|
|
| Author: | gunga | | Posted: | Apr 1, 2021 14:22 | | Subject: | Inventory Change Request for Set 7259-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 58181pb13 Trans-Black Slope 33 3 x 6 without Inner Walls with ARC-170 Starfighter Left Pattern (Alternate)
* Add 1 Part 58181pb13 Trans-Black Slope 33 3 x 6 without Inner Walls with ARC-170 Starfighter Left Pattern (Alternate)
Comments from Submitter:
Alternates to 3939px1, px2. Only ARC-170 set to have these parts.
|
|
| Author: | gunga | | Posted: | Apr 1, 2021 14:09 | | Subject: | Inventory Change Request for Set 75878-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 85984pb282 Black Slope 30 1 x 2 x 2/3 with Two Exhaust Pipes and Silver Outline on Black Background Pattern (Sticker) - Set 75878 (Counterpart)
* Add 1 Part 11477pb103L Blue Slope, Curved 2 x 1 with Black Bumper and Silver Stripe on Blue Background Pattern Model Left Side (Sticker) - Set 75878 (Counterpart)
* Add 1 Part 11477pb103R Blue Slope, Curved 2 x 1 with Black Bumper and Silver Stripe on Blue Background Pattern Model Right Side (Sticker) - Set 75878 (Counterpart)
* Add 1 Part 11477pb102L Blue Slope, Curved 2 x 1 with Headlight on Blue Background Pattern Model Left Side (Sticker) - Set 75878 (Counterpart)
* Add 1 Part 11477pb102R Blue Slope, Curved 2 x 1 with Headlight on Blue Background Pattern Model Right Side (Sticker) - Set 75878 (Counterpart)
* Add 1 Part 15068pb299 Blue Slope, Curved 2 x 2 with Black Grille, Silver Line and 'BUGATTI' Pattern (Sticker) - Set 75878 (Counterpart)
|
|
| Author: | jdinklage | | Posted: | Apr 1, 2021 14:05 | | Subject: | Lego/Bricklink-Very frustrated with you | | Viewed: | 395 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Please stop blocking my access to the parts I need. I am extremely annoyed that
you won't allow me to buy items from so many sellers I need to because they
aren't paying my taxes. They "don't support orders that ship to Massachusetts".
You are literally screwing up my access to rare parts that are only available
on this site. You are hurting part of this hobby for me. STOP IT! I am only
a buyer and not a seller. I understand you must be going through some growing
pains trying to get all the sellers to pay taxes, but don't take it out on
the buyers. Seriously stop blocking my access to the parts I need. Not allowing
me to ship items to my home from sellers who are willing to ship them to me is
a legitimate reason for me to be pissed. You are forcing me to go buy clone
parts off site when I don't really want to as an immediate direct result
of this action.
|
|
| Author: | gunga | | Posted: | Apr 1, 2021 14:01 | | Subject: | Inventory Change Request for Set 60173-1 | | Viewed: | 12 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4515pb063 Dark Bluish Gray Slope 10 6 x 8 with Roof Tiles and Reddish Brown Dirt Pattern (Sticker) - Set 60173 (Counterpart)
* Add 1 Part 3009pb236L White Brick 1 x 6 with Blue 'POLICE' and Black Arrow with 'HOT SURFACE' Pattern Model Left Side (Sticker) - Set 60173 (Counterpart)
* Add 1 Part 3009pb236R White Brick 1 x 6 with Blue 'POLICE' and Black Arrow with 'HOT SURFACE' Pattern Model Right Side (Sticker) - Set 60173 (Counterpart)
|
|
| Author: | gunga | | Posted: | Apr 1, 2021 13:57 | | Subject: | Inventory Change Request for Set 41126-1 | | Viewed: | 13 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4515pb062 Dark Red Slope 10 6 x 8 with Butterfly Pattern (Sticker) - Set 41126 (Counterpart)
* Add 1 Part 3675pb03 Dark Red Slope 33 3 x 3 Double Convex with Medium Blue Butterfly Pattern (Sticker) - Set 41126 (Counterpart)
|
|
| Author: | randyf | | Posted: | Apr 1, 2021 13:41 | | Subject: | Inventory Change Request for Set 41422-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 44861 Dark Bluish Gray Plate, Modified 1 x 2 with Open O Clip on Top (Alternate) (match ID 1)
* Change 1 Part Dark Bluish Gray 92280 Plate, Modified 1 x 2 with Clip on Top {match ID 0 to 1}
Comments from Submitter:
Found during sealed set part-outs by member Pippysblocks: https://www.bricklink.com/messageThread.asp?ID=287299&nID=1262984
|
|
| Author: | gunga | | Posted: | Apr 1, 2021 11:46 | | Subject: | Inventory Change Request for Set 60175-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6239pb098 Blue Tail Shuttle with White Police Badge on Both Sides Pattern (Stickers) - Set 60175 (Counterpart)
* Add 1 Part 60657pb005 White Door 1 x 3 x 3 Right - Open Between Top and Bottom Hinge with Keypad and 'CK60175' License Plate Pattern (Sticker) - Set 60175 (Counterpart)
* Add 2 Part 60581pb161 White Panel 1 x 4 x 3 with Side Supports - Hollow Studs with 'BANK' Pattern (Sticker) - Set 60175 (Counterpart)
|
|
| Author: | gunga | | Posted: | Apr 1, 2021 11:40 | | Subject: | Inventory Change Request for Set 70650-1 | | Viewed: | 11 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 6239pb099 Black Tail Shuttle with Gold Dragon on Red Background Pattern on Both Sides (Stickers) - Set 70650 (Counterpart)
|
| Author: | gunga | | Posted: | Apr 1, 2021 11:36 | | Subject: | Inventory Change Request for Set 60193-1 | | Viewed: | 11 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 6239pb097 Orange Tail Shuttle with Arctic Logo Pattern on Both Sides (Stickers) - Set 60193 (Counterpart)
|
| Author: | gunga | | Posted: | Apr 1, 2021 11:32 | | Subject: | Inventory Change Request for Set 2064-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6239pb096 White Tail Shuttle with 2 Red Stripes and Blue Star of Life Pattern on Both Sides (Stickers) - Set 2064 (Counterpart)
|
| Author: | gunga | | Posted: | Apr 1, 2021 11:15 | | Subject: | Inventory Change Request for Set 60102-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 87614pb017 Black Tail 12 x 2 x 5 with Gold 'VIP' in White Wing Logo Pattern on Both Sides (Stickers) - Set 60102 (Counterpart)
|
|
| Author: | gunga | | Posted: | Apr 1, 2021 11:06 | | Subject: | Inventory Change Request for Set 8162-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 32009pb034L Black Technic, Liftarm 1 x 11.5 Double Bent Thick with White and Orange Checkered Pattern Model Left Side (Stickers) - Set 8162 (Counterpart)
* Add 1 Part 32009pb034R Black Technic, Liftarm 1 x 11.5 Double Bent Thick with White and Orange Checkered Pattern Model Right Side (Stickers) - Set 8162 (Counterpart)
|
|
| Author: | gunga | | Posted: | Apr 1, 2021 10:57 | | Subject: | Inventory Change Request for Set 8294-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 32316pb052L Red Technic, Liftarm 1 x 5 Thick with Red and White Danger Stripes Pattern Model Left Side (Sticker) - Set 8294 (Counterpart)
* Add 1 Part 32316pb052R Red Technic, Liftarm 1 x 5 Thick with Red and White Danger Stripes Pattern Model Right Side (Sticker) - Set 8294 (Counterpart)
Comments from Submitter:
Page 19, Book 2 of instructions.
|
|
| Author: | gunga | | Posted: | Apr 1, 2021 10:38 | | Subject: | Inventory Change Request for Set 8264-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 32523pb23L Yellow Technic, Liftarm 1 x 3 Thick with Black and Yellow Danger Stripes and Number 8 Pattern Model Left Side (Sticker) - Set 8264 (Counterpart)
* Add 1 Part 32523pb23R Yellow Technic, Liftarm 1 x 3 Thick with Black and Yellow Danger Stripes Pattern Model Left Side (Sticker) - Set 8264 (Counterpart)
|
|
| Author: | gunga | | Posted: | Apr 1, 2021 10:34 | | Subject: | Inventory Change Request for Set 70639-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 2958pb087L Black Technic, Disk 3 x 3 with red Circular Saw Blade Pattern Model Left Side (Sticker) - Set 70639 (Counterpart)
* Add 1 Part 2958pb087R Black Technic, Disk 3 x 3 with red Circular Saw Blade Pattern Model Right Side (Sticker) - Set 70639 (Counterpart)
* Add 1 Part 50950pb122R Dark Purple Slope, Curved 3 x 1 with Dark Azure Ninjago Logogram 'D81' Pattern Model Right Side (Sticker) - Set 70639 (Counterpart)
|
|
| Author: | enig | | Posted: | Apr 1, 2021 08:50 | | Subject: | Inventory Change Request for Set 71043-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 9 Part 3957b Trans-Clear Antenna 4H - Flat Top (Alternate) (match ID 1)
* Add 1 Part 3957b Trans-Clear Antenna 4H - Flat Top (Extra)
* Change {3 to 6} Part Trans-Red 3024 Plate 1 x 1 (Extra)
* Change {2 to 4} Part Trans-Light Blue 3024 Plate 1 x 1 (Extra)
* Change {1 to 3} Part Green 24855 Plant Flower Stem with Bottom Pin (Extra)
* Change 9 Part Trans-Clear 3957 Antenna 4H - Round Top {match ID 0 to 1}
* Change {2 to 3} Part Trans-Yellow 3024 Plate 1 x 1 (Extra)
Comments from Submitter:
uniform across x10 sealed sets
|
|
| Author: | axaday | | Posted: | Apr 1, 2021 06:54 | | Subject: | Inventory Change Request for Set 5267-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Light Gray {6538 Technic, Connector Axle 2L (Ridged Undetermined Type) to 6538a Technic, Connector Axle 2L (Ridged with + Hole + Orientation)}
Comments from Submitter:
Sealed set, pic following
|
|
| Author: | Hexy | | Posted: | Apr 1, 2021 05:08 | | Subject: | Set numbers in Part Titles | | Viewed: | 62 times | | Topic: | Catalog | | Status: | Open | |
|
| There are a lot of stickered or printed part stating the set the come from
at the end of the name, for example
At what number does it become unsuitable to put several sets in the name.
I've seen some with 2 but rarely any with 3. Also, does anyone have an opinion
if they should stay or be removed? Because I would much rather a cleaner, simple
title. It is annoying that some don't have this in their title, even if they
only have 1 or 2 sets.
Regards,
Theo - The_RealRedHex
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
Denmark
United Kingdom, England
Russia, Moscow Region
Canada, British Columbia
Germany, Niedersachsen
Italy, Lombardia
Australia, South Australia
France, Grand Est
Slovenia
Netherlands, Noord-Brabant
Switzerland, Bern
Spain, Comunidad Valenciana
Lithuania, Panevėžys
