Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | psusaxman2000 | Posted: | Jan 14, 2021 09:31 | Subject: | Re: Is it possible | Viewed: | 30 times | Topic: | Inventories | |
|
| In Inventories, rbritton31 writes:
| Is it possible to part out sets to your stockroom and when you take the parts
out of stockroom have them combine to parts you already have listed without making
2 listings for parts you already have. I want to do the computer work first before
I do the physical work but not if is going to give me for example listings for
2 sets of black technic pins, blue technic axle pins, etc.
|
Once there is another "lot" listing, I don't think that you can combine them
(I couldn't find anything). I know when you part a set out you can use that
if it finds an existing lot to combine them together, but you'll have to
track the parts at that time which for me was just as annoying.
What I've done is part the set out to the stock room and then when I'm
ready to move everything to my inventory, promote it all at once. This creates
duplicates, but if you use your inventory menu, search for "non-unique" items
and you will see only the duplicates. You can then manually add the lots together
and delete the dups. It's still kind of annoying, but at least you can clean
up your lots.
|
|
Author: | rbritton31 | Posted: | Jan 14, 2021 09:21 | Subject: | Is it possible | Viewed: | 173 times | Topic: | Inventories | Status: | Open | |
|
| Is it possible to part out sets to your stockroom and when you take the parts
out of stockroom have them combine to parts you already have listed without making
2 listings for parts you already have. I want to do the computer work first before
I do the physical work but not if is going to give me for example listings for
2 sets of black technic pins, blue technic axle pins, etc.
|
|
Author: | Ninepartsred | Posted: | Jan 14, 2021 07:57 | Subject: | Re: 30kg Bulk buy of 90's Lego - what to do | Viewed: | 36 times | Topic: | Inventories | |
|
| In Inventories, Bromwich writes:
| Hi everyone,
This is my first post on here, so apologies if I get the format wrong.
I recently won a large lot of loose Lego at auction, (for too much money), and
have been working my way sorting through it all.
What hooked me was that it came with 30+ instruction sheets, all from the late
80's and early 90's, plus the box for 6542 Launch and Load and 6286 Pirate
Schooner.
Having now spent a couple of surprisingly enjoyable weeks cleaning and picking
out bits, I have 21 near complete sets (minus any Minifigures), but also normally
missing a couple of special pieces.
My question is - What should I do with it now?!
should I (A) looking to buy all of the missing parts (currently 215, inc. minifigs
across 21 sets) to complete the set and sell as 100% complete.
Overall it seems that I need to spend 25-35% of the set selling price to complete.
Or (B) part out and save myself the time of buying the parts to sell them on?
Part of me feels that it would be nice to complete them, but it will also take
a lot longer to get things up and running.
Note - given their age there are also a fair few discoloured parts which I would
want to de-yellow before selling.
All lot of the left over basic part will just join my son's collection.
Any advice would be great.
Thanks,
P.S. Not sure what happened to the photos flipping!
|
I'm currently putting together some sets which need a few parts to complete.
Going by the instructions, you have a few nice ones.
You've obviously already checked the prices and weighed up your profit margin
but are those percentages of your intial cost or the selling price?
It's also worth checking how often the sets sell. In my case, that's
just in the UK for now.
Consider whether you want to sell them quickly or if you're happy to sit
on them for longer to get a better price. If you check your sets that other sellers
have in their stores, you can see when they listed them. Ebay, Gumtree, Facebook,
etc. is better for a quick sale but normally at a lower price.
I know some sellers use Ebay for complete sets and their BL store for parts.
I do when the selling fees are £1.
For example, one of my sets has only sold once on here in the UK in the last
6 months but I've seen it go several times on Ebay for what I consider good
prices.
I've freshened-up some yellowed parts, but as many people will tell you,
they discolour again and sometimes quickly, so I won't sell them. Also, even
though older sets/parts would be expected to show signs of wear, everyone has
a different idea of what's acceptable.
That's just my way of thinking but I hope it's of some help.
|
|
Author: | peregrinator | Posted: | Jan 14, 2021 07:45 | Subject: | Re: 30kg Bulk buy of 90's Lego - what to do | Viewed: | 36 times | Topic: | Inventories | |
|
| In Inventories, Bromwich writes:
| Hi everyone,
This is my first post on here, so apologies if I get the format wrong.
I recently won a large lot of loose Lego at auction, (for too much money), and
have been working my way sorting through it all.
What hooked me was that it came with 30+ instruction sheets, all from the late
80's and early 90's, plus the box for 6542 Launch and Load and 6286 Pirate
Schooner.
Having now spent a couple of surprisingly enjoyable weeks cleaning and picking
out bits, I have 21 near complete sets (minus any Minifigures), but also normally
missing a couple of special pieces.
My question is - What should I do with it now?!
should I (A) looking to buy all of the missing parts (currently 215, inc. minifigs
across 21 sets) to complete the set and sell as 100% complete.
Overall it seems that I need to spend 25-35% of the set selling price to complete.
Or (B) part out and save myself the time of buying the parts to sell them on?
Part of me feels that it would be nice to complete them, but it will also take
a lot longer to get things up and running.
Note - given their age there are also a fair few discoloured parts which I would
want to de-yellow before selling.
All lot of the left over basic part will just join my son's collection.
Any advice would be great.
Thanks,
P.S. Not sure what happened to the photos flipping!
|
25-35% seems a bit high to me. I don't have a good rule of thumb because
I hardly sell any sets, but it just seems high. Are there any sets where the
cost needed to complete is a bit lower than that? Maybe focus on completing those
together with the sets for which you have boxes.
|
|
Author: | Bromwich | Posted: | Jan 14, 2021 07:01 | Subject: | 30kg Bulk buy of 90's Lego - what to do | Viewed: | 150 times | Topic: | Inventories | Status: | Open | |
|
| Hi everyone,
This is my first post on here, so apologies if I get the format wrong.
I recently won a large lot of loose Lego at auction, (for too much money), and
have been working my way sorting through it all.
What hooked me was that it came with 30+ instruction sheets, all from the late
80's and early 90's, plus the box for 6542 Launch and Load and 6286 Pirate
Schooner.
Having now spent a couple of surprisingly enjoyable weeks cleaning and picking
out bits, I have 21 near complete sets (minus any Minifigures), but also normally
missing a couple of special pieces.
My question is - What should I do with it now?!
should I (A) looking to buy all of the missing parts (currently 215, inc. minifigs
across 21 sets) to complete the set and sell as 100% complete.
Overall it seems that I need to spend 25-35% of the set selling price to complete.
Or (B) part out and save myself the time of buying the parts to sell them on?
Part of me feels that it would be nice to complete them, but it will also take
a lot longer to get things up and running.
Note - given their age there are also a fair few discoloured parts which I would
want to de-yellow before selling.
All lot of the left over basic part will just join my son's collection.
Any advice would be great.
Thanks,
P.S. Not sure what happened to the photos flipping!
|
|
|
Author: | Hygrotus | Posted: | Jan 14, 2021 04:15 | Subject: | Inventory Change Request for Set 30343-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 11477pb106 Blue Slope, Curved 2 x 1 with McLaren Logo Pattern (Sticker) - Set 30343 (Counterpart)
* Add 1 Part 93273pb141L Blue Slope, Curved 4 x 1 Double with McLaren Elva Headlight Pattern Model Left Side (Sticker) - Set 30343 (Counterpart)
* Add 1 Part 93273pb141R Blue Slope, Curved 4 x 1 Double with McLaren Elva Headlight Pattern Model Right Side (Sticker) - Set 30343 (Counterpart)
* Add 2 Part 61678pb141 Blue Slope, Curved 4 x 1 with McLaren Elva Air Intake Pattern (Sticker) - Set 30343 (Counterpart)
|
|
Author: | msSquirrel | Posted: | Jan 14, 2021 02:25 | Subject: | Inventory Change Request for Set 3090-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part horse02c01pb01 Black Duplo Horse with Movable Head, Silver Mane, Saddle and Hearts Pattern
* Add 1 Part horse02c01pb05 Black Duplo Horse with Movable Head, Silver Mane and Hearts Pattern
|
|
Author: | msSquirrel | Posted: | Jan 14, 2021 02:24 | Subject: | Inventory Change Request for Set 3615-2 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 31050 Bright Green Duplo Dinosaur Tyrannosaurus rex Adult (Undefined Entry)
* Add 1 Part 31050pb01 Bright Green Duplo Dinosaur Tyrannosaurus rex Adult with Eyes Pattern
|
|
Author: | msSquirrel | Posted: | Jan 14, 2021 02:23 | Subject: | Inventory Change Request for Set 9131-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 31050 Bright Green Duplo Dinosaur Tyrannosaurus rex Adult (Undefined Entry)
* Add 1 Part 31050pb01 Bright Green Duplo Dinosaur Tyrannosaurus rex Adult with Eyes Pattern
|
|
Author: | msSquirrel | Posted: | Jan 14, 2021 02:22 | Subject: | Inventory Change Request for Set 2601-1 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 31050 Red Duplo Dinosaur Tyrannosaurus rex Adult (Undefined Entry)
* Add 1 Part 31050pb02 Red Duplo Dinosaur Tyrannosaurus rex Adult with Eyes and Yellow Spots Pattern
|
Author: | msSquirrel | Posted: | Jan 14, 2021 02:21 | Subject: | Inventory Change Request for Set 2851-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 31050 Red Duplo Dinosaur Tyrannosaurus rex Adult (Undefined Entry)
* Add 1 Part 31050pb02 Red Duplo Dinosaur Tyrannosaurus rex Adult with Eyes and Yellow Spots Pattern
|
|
Author: | msSquirrel | Posted: | Jan 14, 2021 02:21 | Subject: | Inventory Change Request for Set 9195-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 31050 Red Duplo Dinosaur Tyrannosaurus rex Adult (Undefined Entry)
* Add 1 Part 31050pb02 Red Duplo Dinosaur Tyrannosaurus rex Adult with Eyes and Yellow Spots Pattern
|
|
Author: | msSquirrel | Posted: | Jan 14, 2021 02:20 | Subject: | Inventory Change Request for Set 9194-1 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 31050 Red Duplo Dinosaur Tyrannosaurus rex Adult (Undefined Entry)
* Add 1 Part 31050pb02 Red Duplo Dinosaur Tyrannosaurus rex Adult with Eyes and Yellow Spots Pattern
|
|
Author: | msSquirrel | Posted: | Jan 14, 2021 02:20 | Subject: | Inventory Change Request for Set 9196-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 31050 Red Duplo Dinosaur Tyrannosaurus rex Adult (Undefined Entry)
* Add 1 Part 31050pb02 Red Duplo Dinosaur Tyrannosaurus rex Adult with Eyes and Yellow Spots Pattern
|
|
Author: | msSquirrel | Posted: | Jan 14, 2021 02:18 | Subject: | Inventory Change Request for Set 9213-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 31050 Red Duplo Dinosaur Tyrannosaurus rex Adult (Undefined Entry)
* Add 2 Part 31050pb02 Red Duplo Dinosaur Tyrannosaurus rex Adult with Eyes and Yellow Spots Pattern
|
|
Author: | msSquirrel | Posted: | Jan 14, 2021 02:18 | Subject: | Inventory Change Request for Set 2605-1 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 31050 Red Duplo Dinosaur Tyrannosaurus rex Adult (Undefined Entry)
* Add 1 Part 31050pb02 Red Duplo Dinosaur Tyrannosaurus rex Adult with Eyes and Yellow Spots Pattern
|
|
Author: | msSquirrel | Posted: | Jan 14, 2021 02:17 | Subject: | Inventory Change Request for Set 2604-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 31050 Red Duplo Dinosaur Tyrannosaurus rex Adult (Undefined Entry)
* Add 1 Part 31050pb02 Red Duplo Dinosaur Tyrannosaurus rex Adult with Eyes and Yellow Spots Pattern
|
|
Author: | randyf | Posted: | Jan 14, 2021 01:12 | Subject: | Re: Inventory Change Request for Set 76048-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Vanguard writes:
| In Inventories Requests, Vanguard writes:
| Please make changes to the following inventory:
* Add 1 Part 30350b Black Tile, Modified 2 x 3 with 2 Open O Clips
Comments from Submitter:
This should be added to the counterparts section. It is a piece that has a sticker on it. Sources 1) I'm an owner of this set 2) The sticker sheet clearly shows 5 stickers, but there are only 4 counterpart pieces.
|
Sorry. I didn't know how to upload a picture of the part with the sticker
applied.
Official name should be:
Black Tile, Modified 2 x 3 with 2 Open O Clips with Red Octopus (Marvel HYDRA
Logo) Pattern (Sticker)
|
This request will not be accepted.
The proper procedure to add a stickered Counterpart to BrickLink and a set inventory
is as follows:
(1) Add the stickered part to the BrickLink catalog:
https://www.bricklink.com/wantedCatalog.asp?catType=P
Help on adding an item to the BrickLink catalog:
https://www.bricklink.com/help.asp?helpID=71
(2) Add an image to the BrickLink catalog for the stickered part:
https://www.bricklink.com/v2/catalog/catalogImageAdd.page?itemType=P
Help on adding an image to the BrickLink catalog:
https://www.bricklink.com/help.asp?helpID=87
(3) Fill out an Inventory Change Request to add the stickered part to the set
inventory after it is approved by a Catalog Associate or Catalog Administrator:
https://www.bricklink.com/catalogInvChange.asp?itemType=S
----------
The following videos are great tutorials for the process:
https://www.bricklink.com/message.asp?ID=1191009
Cheers,
Randy
|
|
|
Author: | peregrinator | Posted: | Jan 13, 2021 19:37 | Subject: | Re: Mixture of old and new dark (bluish) grey | Viewed: | 18 times | Topic: | Inventories | |
|
| In Inventories, popsicle writes:
| I'll add: assuming the logic holds true for both dark and light grays. Which
it should.
|
Hmmmm, not necessarily -- light grey and light bluish grey are considerably
more difficult to tell apart than dark grey and dark bluish grey
|
Author: | Chee_ching | Posted: | Jan 13, 2021 17:24 | Subject: | 51515 ready for approval | Viewed: | 65 times | Topic: | Inventories | Status: | Open | |
|
| Dear Team,
I have completed the inventory compilation for set 51515. Please review and provide
approval.
|
|
Author: | popsicle | Posted: | Jan 13, 2021 17:01 | Subject: | Re: Mixture of old and new dark (bluish) grey | Viewed: | 29 times | Topic: | Inventories | |
|
| In Inventories, popsicle writes:
| In Inventories, iprice writes:
| I've just pulled apart a set (#4495 - Star Wars AT-TE Mini) that I purchased
my self, many years ago, which has been in sealed storage in my loft pretty much
since I first assembled it.
I noticed that several parts were old dark grey while the majority were dark
bluish grey.
I checked the inventory and found that all parts should have been dark bluish
grey. There was no mention of old dark grey parts.
These parts (2* 1x4 plate and 6* Hinge Plate 1 x 2 Locking with 1 Finger On Top)
are definitely old dark grey. They are not sun damaged or faded; they are full
and evenly coloured top, bottom and sides. Also no other colour parts are affected.
So
1) Is this unusual?
2) Can the Inventory reflect that this set may have old dark grey alternative
parts.
|
There were a few sets from those crossover years that were reported to contain
a mixture of both grays. Most notably for me, is the beautiful
I don't know about the inventory, but certainly the listing notes can and
in fact, do reflect such info
|
I'll add: assuming the logic holds true for both dark and light grays. Which
it should.
|
|
Author: | popsicle | Posted: | Jan 13, 2021 16:56 | Subject: | Re: Mixture of old and new dark (bluish) grey | Viewed: | 38 times | Topic: | Inventories | |
|
| In Inventories, iprice writes:
| I've just pulled apart a set (#4495 - Star Wars AT-TE Mini) that I purchased
my self, many years ago, which has been in sealed storage in my loft pretty much
since I first assembled it.
I noticed that several parts were old dark grey while the majority were dark
bluish grey.
I checked the inventory and found that all parts should have been dark bluish
grey. There was no mention of old dark grey parts.
These parts (2* 1x4 plate and 6* Hinge Plate 1 x 2 Locking with 1 Finger On Top)
are definitely old dark grey. They are not sun damaged or faded; they are full
and evenly coloured top, bottom and sides. Also no other colour parts are affected.
So
1) Is this unusual?
2) Can the Inventory reflect that this set may have old dark grey alternative
parts.
|
There were a few sets from those crossover years that were reported to contain
a mixture of both grays. Most notably for me, is the beautiful
I don't know about the inventory, but certainly the listing notes can and
in fact, do reflect such info
|
|
Author: | Vanguard | Posted: | Jan 13, 2021 15:59 | Subject: | Re: Inventory Change Request for Set 76048-1 | Viewed: | 10 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Vanguard writes:
| Please make changes to the following inventory:
* Add 1 Part 30350b Black Tile, Modified 2 x 3 with 2 Open O Clips
Comments from Submitter:
This should be added to the counterparts section. It is a piece that has a sticker on it. Sources 1) I'm an owner of this set 2) The sticker sheet clearly shows 5 stickers, but there are only 4 counterpart pieces.
|
Sorry. I didn't know how to upload a picture of the part with the sticker
applied.
Official name should be:
Black Tile, Modified 2 x 3 with 2 Open O Clips with Red Octopus (Marvel HYDRA
Logo) Pattern (Sticker)
|
|
Author: | Vanguard | Posted: | Jan 13, 2021 15:57 | Subject: | Inventory Change Request for Set 76048-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 30350b Black Tile, Modified 2 x 3 with 2 Open O Clips
Comments from Submitter:
This should be added to the counterparts section. It is a piece that has a sticker on it. Sources 1) I'm an owner of this set 2) The sticker sheet clearly shows 5 stickers, but there are only 4 counterpart pieces.
|
Author: | CanadaFirst | Posted: | Jan 13, 2021 15:37 | Subject: | Re: Trans-neon orange | Viewed: | 32 times | Topic: | Colors | |
|
| Thank you, it's appreciated! |
Author: | Brickitty | Posted: | Jan 13, 2021 15:22 | Subject: | Re: Trans-neon orange | Viewed: | 27 times | Topic: | Colors | |
|
| In Colors, pgremeau writes:
| Actually, after trying again, I would say they don't fluoresce like regular
Trans-Neon Orange parts, but they do react differently to the light (even though
it may look the same on the image).
|
Thanks for the pic! That's really interesting.
|
|
Author: | Brickitty | Posted: | Jan 13, 2021 15:20 | Subject: | Re: Trans-neon orange | Viewed: | 23 times | Topic: | Colors | |
|
| In Colors, pgremeau writes:
| In Colors, Brickitty writes:
| In Colors, CanadaFirst writes:
| Hi!
We sold some used trans-neon bricks 1x1 and the buyer is saying that they are
not trans-neon orange because they do not glow under black light.
Unless we're mistaken, the new trans-neon orange does not glow under black
light, are we wrong here? I remember the bricks as I listed them not too long
ago and I had compared the color to trans-neon orange we had from brand new sets
parted out and to some trans-orange again from parted out brand new lego sets
and the color was not trans-orange, it had the reddish tinge that the trans-neon
orange has but it's not 'milky' like the old trans-neon orange.
Are we mistaken? If we are we will correct our assumptions but we seem to recall
seeing a discussion about trans-neon orange but can't find it at the moment.
|
I think it's probably your mistake, for two reasons. First, 3005 1x1 bricks
have only been produced once in Trans-Neon Orange, in 2005 for set 7258, which
only had ONE copy. So the piece is very rare, whereas 3005 in Trans-Orange has
been in over 60 sets and is currently in production. Additionally, since 3005
in Trans-Neon Orange is only from 2005, which was before the transition to the
newer, redder Trans-Neon Orange color, it's very likely that the part only
exists in the older, milkier version of Trans-Neon Orange. If you think you found
redder ones, they're probably actually Trans-Orange, which also has an older/newer
shade difference with some looking more red than others.
Second, I've been cataloging 500,000 used parts over the last 6 months, and
I've been separating the newer and older shades of Trans-Neon Orange. I've
looked at them all under a blacklight, and they ALL fluoresce. The older shade
fluoresces more brightly, but the newer redder ones definitely fluoresce as well.
Every. Single. One. Whereas Trans-Orange never fluoresces, ever.
|
I posted recently that I found out some of my Trans-Orange candle flame parts
fluoresce under black light. . This part is not supposed to exist
in Trans-Neon Orange.
|
With how much detail-work I've been doing with colors recently, I could probably
definitely identify which color they are from a high-quality non-blacklight picture
if you can obtain one.
|
|
Weird! I'd be very interested in seeing a comparison picture of that part
next to Trans-Neon Orange parts under a blacklight. I've personally never
found a non-neon part that fluoresces, but I know they definitely exist, and
I've seen pictures of Old Dark Red fluorescing as well as comments from other
users on other colors.
On the flip side, though, I've never seen evidence of actual Neon parts NOT
fluorescing, and I'll remain skeptical without photo evidence of it.
|
|
Author: | laulainendebra | Posted: | Jan 13, 2021 15:20 | Subject: | Inventory Change Request for Set 76126-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 64680 Dark Blue Technic, Panel Fairing #14 Large Short Smooth, Side B (Counterpart)
Comments from Submitter:
All the counterparts with stickers are not listed. Please add these.
|
|
Author: | pgremeau | Posted: | Jan 13, 2021 15:18 | Subject: | Re: Trans-neon orange | Viewed: | 23 times | Topic: | Colors | |
|
| In Colors, pgremeau writes:
| In Colors, Brickitty writes:
| In Colors, CanadaFirst writes:
| Hi!
We sold some used trans-neon bricks 1x1 and the buyer is saying that they are
not trans-neon orange because they do not glow under black light.
Unless we're mistaken, the new trans-neon orange does not glow under black
light, are we wrong here? I remember the bricks as I listed them not too long
ago and I had compared the color to trans-neon orange we had from brand new sets
parted out and to some trans-orange again from parted out brand new lego sets
and the color was not trans-orange, it had the reddish tinge that the trans-neon
orange has but it's not 'milky' like the old trans-neon orange.
Are we mistaken? If we are we will correct our assumptions but we seem to recall
seeing a discussion about trans-neon orange but can't find it at the moment.
|
I think it's probably your mistake, for two reasons. First, 3005 1x1 bricks
have only been produced once in Trans-Neon Orange, in 2005 for set 7258, which
only had ONE copy. So the piece is very rare, whereas 3005 in Trans-Orange has
been in over 60 sets and is currently in production. Additionally, since 3005
in Trans-Neon Orange is only from 2005, which was before the transition to the
newer, redder Trans-Neon Orange color, it's very likely that the part only
exists in the older, milkier version of Trans-Neon Orange. If you think you found
redder ones, they're probably actually Trans-Orange, which also has an older/newer
shade difference with some looking more red than others.
Second, I've been cataloging 500,000 used parts over the last 6 months, and
I've been separating the newer and older shades of Trans-Neon Orange. I've
looked at them all under a blacklight, and they ALL fluoresce. The older shade
fluoresces more brightly, but the newer redder ones definitely fluoresce as well.
Every. Single. One. Whereas Trans-Orange never fluoresces, ever.
|
I posted recently that I found out some of my Trans-Orange candle flame parts
fluoresce under black light. . This part is not supposed to exist
in Trans-Neon Orange.
|
Actually, after trying again, I would say they don't fluoresce like regular
Trans-Neon Orange parts, but they do react differently to the light (even though
it may look the same on the image).
|
|
With how much detail-work I've been doing with colors recently, I could probably
definitely identify which color they are from a high-quality non-blacklight picture
if you can obtain one.
|
|
|
|
|
Author: | pgremeau | Posted: | Jan 13, 2021 15:07 | Subject: | Re: Trans-neon orange | Viewed: | 26 times | Topic: | Colors | |
|
| In Colors, Brickitty writes:
| In Colors, CanadaFirst writes:
| Hi!
We sold some used trans-neon bricks 1x1 and the buyer is saying that they are
not trans-neon orange because they do not glow under black light.
Unless we're mistaken, the new trans-neon orange does not glow under black
light, are we wrong here? I remember the bricks as I listed them not too long
ago and I had compared the color to trans-neon orange we had from brand new sets
parted out and to some trans-orange again from parted out brand new lego sets
and the color was not trans-orange, it had the reddish tinge that the trans-neon
orange has but it's not 'milky' like the old trans-neon orange.
Are we mistaken? If we are we will correct our assumptions but we seem to recall
seeing a discussion about trans-neon orange but can't find it at the moment.
|
I think it's probably your mistake, for two reasons. First, 3005 1x1 bricks
have only been produced once in Trans-Neon Orange, in 2005 for set 7258, which
only had ONE copy. So the piece is very rare, whereas 3005 in Trans-Orange has
been in over 60 sets and is currently in production. Additionally, since 3005
in Trans-Neon Orange is only from 2005, which was before the transition to the
newer, redder Trans-Neon Orange color, it's very likely that the part only
exists in the older, milkier version of Trans-Neon Orange. If you think you found
redder ones, they're probably actually Trans-Orange, which also has an older/newer
shade difference with some looking more red than others.
Second, I've been cataloging 500,000 used parts over the last 6 months, and
I've been separating the newer and older shades of Trans-Neon Orange. I've
looked at them all under a blacklight, and they ALL fluoresce. The older shade
fluoresces more brightly, but the newer redder ones definitely fluoresce as well.
Every. Single. One. Whereas Trans-Orange never fluoresces, ever.
|
I posted recently that I found out some of my Trans-Orange candle flame parts
fluoresce under black light. . This part is not supposed to exist
in Trans-Neon Orange.
|
With how much detail-work I've been doing with colors recently, I could probably
definitely identify which color they are from a high-quality non-blacklight picture
if you can obtain one.
|
|
|
Author: | Brickitty | Posted: | Jan 13, 2021 15:03 | Subject: | Re: Trans-neon orange | Viewed: | 36 times | Topic: | Colors | |
|
| In Colors, CanadaFirst writes:
| In Colors, Brickitty writes:
| In Colors, CanadaFirst writes:
| Hi!
We sold some used trans-neon bricks 1x1 and the buyer is saying that they are
not trans-neon orange because they do not glow under black light.
Unless we're mistaken, the new trans-neon orange does not glow under black
light, are we wrong here? I remember the bricks as I listed them not too long
ago and I had compared the color to trans-neon orange we had from brand new sets
parted out and to some trans-orange again from parted out brand new lego sets
and the color was not trans-orange, it had the reddish tinge that the trans-neon
orange has but it's not 'milky' like the old trans-neon orange.
Are we mistaken? If we are we will correct our assumptions but we seem to recall
seeing a discussion about trans-neon orange but can't find it at the moment.
|
I think it's probably your mistake, for two reasons. First, 3005 1x1 bricks
have only been produced once in Trans-Neon Orange, in 2005 for set 7258, which
only had ONE copy. So the piece is very rare, whereas 3005 in Trans-Orange has
been in over 60 sets and is currently in production. Additionally, since 3005
in Trans-Neon Orange is only from 2005, which was before the transition to the
newer, redder Trans-Neon Orange color, it's very likely that the part only
exists in the older, milkier version of Trans-Neon Orange. If you think you found
redder ones, they're probably actually Trans-Orange, which also has an older/newer
shade difference with some looking more red than others.
Second, I've been cataloging 500,000 used parts over the last 6 months, and
I've been separating the newer and older shades of Trans-Neon Orange. I've
looked at them all under a blacklight, and they ALL fluoresce. The older shade
fluoresces more brightly, but the newer redder ones definitely fluoresce as well.
Every. Single. One. Whereas Trans-Orange never fluoresces, ever.
With how much detail-work I've been doing with colors recently, I could probably
definitely identify which color they are from a high-quality non-blacklight picture
if you can obtain one.
|
Thanks for the information. we offered to either refund or credit the part to
the buyer.
|
Cool. Just wanted to add -- I've ordered multiple times from your store,
and I've been very happy every time. I think you're a quality seller,
and I'll recommend you any time. Rock on!
|
|
Author: | randyf | Posted: | Jan 13, 2021 14:44 | Subject: | Re: 30374 trans-purple color vary? | Viewed: | 29 times | Topic: | Colors | |
|
| In Colors, runner.caller writes:
| Okay, I have another development.
I also have a trans-purple 3L bar that should be more definite since there are
no "trans-light purple" for that color in the catalog.
So, it appears that for the 4L bar...
The 3 that I have that are "lighter" perfectly match the color of the 3L bar.
Meaning I have 2 that are darker.
I tried to take a picture, but the camera and lighting make them look "trans-dark
blue", but they are not as I have one of those in the pic as well. (trust me,
the pic makes them look much closer than in person, the two in question are def
purple)
Picture Key:
Blue Mark: "Trans-Dark Blue"
Red Mark: "Trans-Purple" - match the 3L trans-purple
Green Mark: "Trans-Purple" - but darker than the other ones.
I might see if I can get a better pic.
My current fringe theory is that the two that are different came from a newer
set possibly.
Thanks Randy! Seems like you're often chiming in in my color questions. I
appreciate you sharing all you knowledge with me!
|
Those are just variations of Trans-Purple like there are slight variations for
almost all colors. Trans-Light Purple is very obvious:
https://www.flickr.com/photos/126975831@N07/15018302947/
The lightsaber blade was the only System part ever made in that color. Besides
that, it was a Clikits exclusive.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Jan 13, 2021 14:35 | Subject: | Re: Color verification part 40378 | Viewed: | 34 times | Topic: | Catalog | |
|
| In Catalog, infinibrix writes:
| The fact that some of these are slightly different shades I’m sure you are also
aware is common with many other colours too such as Pearl Gold and Yellow though
we don’t separate those or give them their own name either?
|
Yes, we are aware, but none of the current admin team were admins when this problem
was created over 15 years ago. The hope is to move everything pre-2010 Flat Silver
to Pearl Light Gray at some point.
|
|
Author: | CanadaFirst | Posted: | Jan 13, 2021 14:23 | Subject: | Re: Trans-neon orange | Viewed: | 32 times | Topic: | Colors | |
|
| In Colors, Brickitty writes:
| In Colors, CanadaFirst writes:
| Hi!
We sold some used trans-neon bricks 1x1 and the buyer is saying that they are
not trans-neon orange because they do not glow under black light.
Unless we're mistaken, the new trans-neon orange does not glow under black
light, are we wrong here? I remember the bricks as I listed them not too long
ago and I had compared the color to trans-neon orange we had from brand new sets
parted out and to some trans-orange again from parted out brand new lego sets
and the color was not trans-orange, it had the reddish tinge that the trans-neon
orange has but it's not 'milky' like the old trans-neon orange.
Are we mistaken? If we are we will correct our assumptions but we seem to recall
seeing a discussion about trans-neon orange but can't find it at the moment.
|
I think it's probably your mistake, for two reasons. First, 3005 1x1 bricks
have only been produced once in Trans-Neon Orange, in 2005 for set 7258, which
only had ONE copy. So the piece is very rare, whereas 3005 in Trans-Orange has
been in over 60 sets and is currently in production. Additionally, since 3005
in Trans-Neon Orange is only from 2005, which was before the transition to the
newer, redder Trans-Neon Orange color, it's very likely that the part only
exists in the older, milkier version of Trans-Neon Orange. If you think you found
redder ones, they're probably actually Trans-Orange, which also has an older/newer
shade difference with some looking more red than others.
Second, I've been cataloging 500,000 used parts over the last 6 months, and
I've been separating the newer and older shades of Trans-Neon Orange. I've
looked at them all under a blacklight, and they ALL fluoresce. The older shade
fluoresces more brightly, but the newer redder ones definitely fluoresce as well.
Every. Single. One. Whereas Trans-Orange never fluoresces, ever.
With how much detail-work I've been doing with colors recently, I could probably
definitely identify which color they are from a high-quality non-blacklight picture
if you can obtain one.
|
Thanks for the information. we offered to either refund or credit the part to
the buyer.
|
|
Author: | Brickitty | Posted: | Jan 13, 2021 13:58 | Subject: | Re: Trans-neon orange | Viewed: | 55 times | Topic: | Colors | |
|
| In Colors, CanadaFirst writes:
| Hi!
We sold some used trans-neon bricks 1x1 and the buyer is saying that they are
not trans-neon orange because they do not glow under black light.
Unless we're mistaken, the new trans-neon orange does not glow under black
light, are we wrong here? I remember the bricks as I listed them not too long
ago and I had compared the color to trans-neon orange we had from brand new sets
parted out and to some trans-orange again from parted out brand new lego sets
and the color was not trans-orange, it had the reddish tinge that the trans-neon
orange has but it's not 'milky' like the old trans-neon orange.
Are we mistaken? If we are we will correct our assumptions but we seem to recall
seeing a discussion about trans-neon orange but can't find it at the moment.
|
I think it's probably your mistake, for two reasons. First, 3005 1x1 bricks
have only been produced once in Trans-Neon Orange, in 2005 for set 7258, which
only had ONE copy. So the piece is very rare, whereas 3005 in Trans-Orange has
been in over 60 sets and is currently in production. Additionally, since 3005
in Trans-Neon Orange is only from 2005, which was before the transition to the
newer, redder Trans-Neon Orange color, it's very likely that the part only
exists in the older, milkier version of Trans-Neon Orange. If you think you found
redder ones, they're probably actually Trans-Orange, which also has an older/newer
shade difference with some looking more red than others.
Second, I've been cataloging 500,000 used parts over the last 6 months, and
I've been separating the newer and older shades of Trans-Neon Orange. I've
looked at them all under a blacklight, and they ALL fluoresce. The older shade
fluoresces more brightly, but the newer redder ones definitely fluoresce as well.
Every. Single. One. Whereas Trans-Orange never fluoresces, ever.
With how much detail-work I've been doing with colors recently, I could probably
definitely identify which color they are from a high-quality non-blacklight picture
if you can obtain one.
|
|
Author: | SylvainLS | Posted: | Jan 13, 2021 13:47 | Subject: | Re: Trans-neon orange | Viewed: | 38 times | Topic: | Colors | |
|
| In Colors, GreatBuy writes:
| […]
I'm sure someone here knows a lot more and can help more, but I'll offer
my two cents. LEGO has changed the plastic composition of transparent parts multiple
times, as well as changing the properties of trans neon orange in the process,
like you stated. I don't think I can post off site links here,
|
You can certainly post off site links on the forum, just not ones to concurrent
sites (sites that sell LEGO, including S@H).
| but absorption
of ultra violet light is dependent on plastic composition, not color.
|
But colour is part of the composition
| You can
research this yourself and send resources to the buyer.
|
|
|
Author: | GreatBuy | Posted: | Jan 13, 2021 13:21 | Subject: | Re: Trans-neon orange | Viewed: | 41 times | Topic: | Colors | |
|
| In Colors, CanadaFirst writes:
| Hi!
We sold some used trans-neon bricks 1x1 and the buyer is saying that they are
not trans-neon orange because they do not glow under black light.
Unless we're mistaken, the new trans-neon orange does not glow under black
light, are we wrong here? I remember the bricks as I listed them not too long
ago and I had compared the color to trans-neon orange we had from brand new sets
parted out and to some trans-orange again from parted out brand new lego sets
and the color was not trans-orange, it had the reddish tinge that the trans-neon
orange has but it's not 'milky' like the old trans-neon orange.
Are we mistaken? If we are we will correct our assumptions but we seem to recall
seeing a discussion about trans-neon orange but can't find it at the moment.
|
I'm sure someone here knows a lot more and can help more, but I'll offer
my two cents. LEGO has changed the plastic composition of transparent parts multiple
times, as well as changing the properties of trans neon orange in the process,
like you stated. I don't think I can post off site links here, but absorption
of ultra violet light is dependent on plastic composition, not color. You can
research this yourself and send resources to the buyer.
|
|
Author: | CanadaFirst | Posted: | Jan 13, 2021 13:10 | Subject: | Trans-neon orange | Viewed: | 130 times | Topic: | Colors | Status: | Open | |
|
| Hi!
We sold some used trans-neon bricks 1x1 and the buyer is saying that they are
not trans-neon orange because they do not glow under black light.
Unless we're mistaken, the new trans-neon orange does not glow under black
light, are we wrong here? I remember the bricks as I listed them not too long
ago and I had compared the color to trans-neon orange we had from brand new sets
parted out and to some trans-orange again from parted out brand new lego sets
and the color was not trans-orange, it had the reddish tinge that the trans-neon
orange has but it's not 'milky' like the old trans-neon orange.
Are we mistaken? If we are we will correct our assumptions but we seem to recall
seeing a discussion about trans-neon orange but can't find it at the moment.
|
|
Author: | GreatBuy | Posted: | Jan 13, 2021 12:38 | Subject: | Re: Mixture of old and new dark (bluish) grey | Viewed: | 21 times | Topic: | Inventories | |
|
| In Inventories, iprice writes:
| I've just pulled apart a set (#4495 - Star Wars AT-TE Mini) that I purchased
my self, many years ago, which has been in sealed storage in my loft pretty much
since I first assembled it.
I noticed that several parts were old dark grey while the majority were dark
bluish grey.
I checked the inventory and found that all parts should have been dark bluish
grey. There was no mention of old dark grey parts.
These parts (2* 1x4 plate and 6* Hinge Plate 1 x 2 Locking with 1 Finger On Top)
are definitely old dark grey. They are not sun damaged or faded; they are full
and evenly coloured top, bottom and sides. Also no other colour parts are affected.
So
1) Is this unusual?
2) Can the Inventory reflect that this set may have old dark grey alternative
parts.
|
This set was produced after LEGO had adjusted their color palette, it is not
exactly uncommon for a mixture of new and old greys to be found in the same set
in this era. LEGO never threw anything away, so they used their remaining inventory.
The inventory will probably need to be adjusted, or at the very least a footnote.
There are other sets from the same time that are missing the same clarification.
|
|
Author: | SylvainLS | Posted: | Jan 13, 2021 12:02 | Subject: | Re: Mixture of old and new dark (bluish) grey | Viewed: | 32 times | Topic: | Inventories | |
|
| In Inventories, iprice writes:
| I've just pulled apart a set (#4495 - Star Wars AT-TE Mini) that I purchased
my self, many years ago, which has been in sealed storage in my loft pretty much
since I first assembled it.
I noticed that several parts were old dark grey while the majority were dark
bluish grey.
I checked the inventory and found that all parts should have been dark bluish
grey. There was no mention of old dark grey parts.
|
It’s not “should have been DBG,” it’s “were not reported as having been found
in DG.”
| These parts (2* 1x4 plate and 6* Hinge Plate 1 x 2 Locking with 1 Finger On Top)
are definitely old dark grey. They are not sun damaged or faded; they are full
and evenly coloured top, bottom and sides. Also no other colour parts are affected.
So
1) Is this unusual?
2) Can the Inventory reflect that this set may have old dark grey alternative
parts.
|
It could now that you found an example.
|
|
Author: | iprice | Posted: | Jan 13, 2021 11:48 | Subject: | Mixture of old and new dark (bluish) grey | Viewed: | 81 times | Topic: | Inventories | Status: | Open | |
|
| I've just pulled apart a set (#4495 - Star Wars AT-TE Mini) that I purchased
my self, many years ago, which has been in sealed storage in my loft pretty much
since I first assembled it.
I noticed that several parts were old dark grey while the majority were dark
bluish grey.
I checked the inventory and found that all parts should have been dark bluish
grey. There was no mention of old dark grey parts.
These parts (2* 1x4 plate and 6* Hinge Plate 1 x 2 Locking with 1 Finger On Top)
are definitely old dark grey. They are not sun damaged or faded; they are full
and evenly coloured top, bottom and sides. Also no other colour parts are affected.
So
1) Is this unusual?
2) Can the Inventory reflect that this set may have old dark grey alternative
parts.
|
|
Author: | popsicle | Posted: | Jan 13, 2021 10:34 | Subject: | Re: What do you think? | Viewed: | 55 times | Topic: | Suggestions | |
|
| In Suggestions, bnsf734 writes:
| Excellent Idea.
Yes please.
|
Thanks!
|
|
Author: | cosmicray | Posted: | Jan 13, 2021 09:57 | Subject: | Re: Parts list by LEGO instruction Bag | Viewed: | 23 times | Topic: | Inventories | |
|
| In Inventories, keithmcgibbon writes:
| Hi,
I am building The big Millenium Falcon and want to sort the parts into bags as
they appear in the instructions. I can see the inventory for the total build,
but it would make building easier if I could sort the parts into the same bags
they come is as new. Does anyone have any suggestions for where I could get
parts list arranged this way?
thanks
|
Some sets have numbered bags. Some have clear bags. When clear bags are used,
LEGO can fiddle with how parts are bagged at the factory, so the ability to predict
that is not available.
Nita Rae
|
|
Author: | popsicle | Posted: | Jan 13, 2021 09:39 | Subject: | Re: 10195 Dropship | Viewed: | 44 times | Topic: | Catalog | |
|
| In Catalog, tonnic writes:
| In Catalog, fin_and_daddy writes:
| What is the point of this post?
|
Maybe just to make it more visual, visualization might help members too look
more into it and help you.
Just someone trying to be helpfull and friendly I guess.
|
Exactly. Thank you
|
| In Catalog, popsicle writes:
| In Catalog, fin_and_daddy writes:
| Hello, does anyone have a Wanted List for just the dropship from the 10195 set
please?
I've spent three evenings going through my manual and making a wanted list
from it, but accidentally deleted it after just finishing the first book. I'm
devastated!
If anyone has already made a list I would be very grateful if I could have a
copy!
|
|
|
|
|
|
Author: | infinibrix | Posted: | Jan 13, 2021 09:29 | Subject: | Re: Color verification part 40378 | Viewed: | 37 times | Topic: | Catalog | |
|
| In Catalog, Hygrotus writes:
| In Catalog, infinibrix writes:
| In Catalog, eBricksOnline writes:
According to the Lego site as far as silver colours go it only shows up as:-
Description Silver Met.
Category Bricks, Special
Element 6097639
Design Number 40378
and Silver Metalic tranlates to Flat Silver on Bricklink but as already mentioned
not all parts/colours belong to a set or are catalogued on the Lego site indefinitely
The situation is then made worse by Bricklink not using Offical Lego colour names/references
which means people can translate them to the Bricklink site and colour palette
incorrectly and so although the part also shows up on BL in Pearl Light Gray
it may be that it only exists in Flat Silver or as Lego call it Silver Metalic.
This is another important reason why using Legos offical colour names should
take precedence over using colour names just because we like the sound of them
better?
|
https://www.bricklink.com/message.asp?ID=1098690
https://www.bricklink.com/message.asp?ID=1031456
|
In the first link you essentially have 3 different colours and they are described
correctly by TLG?
The fact that some of these are slightly different shades I’m sure you are also
aware is common with many other colours too such as Pearl Gold and Yellow though
we don’t separate those or give them their own name either?
If people feel the need to separate those shades even though their tone can vary
to the point that its non conclusive then the comments can always be used saying
Darker/lighter than usual or if it’s a really old colour from a time before Lego
named their colours then I see no issue with Bricklink keeping its own colour
names for those but to purposely use different colour names for the bulk of colours
when TLG have already provided a name for them will always create ambiguity between
different users interpretation of how that matches to bricklinks description
of colours which is detrimental to the accuracy of the catalog? The name of a
colour is like a part number if it does'nt match exactly then you are always
going to run into problems with people guessing or making their own judgments
about what best fits the colour name given by BL?
|
|
Author: | runner.caller | Posted: | Jan 13, 2021 09:21 | Subject: | Re: 30374 trans-purple color vary? | Viewed: | 38 times | Topic: | Colors | |
|
| In Colors, randyf writes:
| In Colors, runner.caller writes:
| I've got 5 of the
in trans-purple.
3 of them appear lighter hue.
I see there is price guide info and a picture for the trans-light purple, but
it doesn't look like that color ever came in a set
Is there documentation that this part varies in this color?
|
Yes, this part comes in two different colors of transparent purple. One of them
is Trans-Purple and the other is Trans-Light Purple. The Trans-Light Purple one
was only used as the lightsaber blade for Mace Windu in
You can read the Additional Notes for the set on that page to understand why
it is not connected to the set through the catalog. (I strongly believe that
the light-up figures should have inventories.)
Cheers,
Randy
|
Okay, I have another development.
I also have a trans-purple 3L bar that should be more definite since there are
no "trans-light purple" for that color in the catalog.
So, it appears that for the 4L bar...
The 3 that I have that are "lighter" perfectly match the color of the 3L bar.
Meaning I have 2 that are darker.
I tried to take a picture, but the camera and lighting make them look "trans-dark
blue", but they are not as I have one of those in the pic as well. (trust me,
the pic makes them look much closer than in person, the two in question are def
purple)
Picture Key:
Blue Mark: "Trans-Dark Blue"
Red Mark: "Trans-Purple" - match the 3L trans-purple
Green Mark: "Trans-Purple" - but darker than the other ones.
I might see if I can get a better pic.
My current fringe theory is that the two that are different came from a newer
set possibly.
Thanks Randy! Seems like you're often chiming in in my color questions. I
appreciate you sharing all you knowledge with me!
|
|
|
Author: | yorbrick | Posted: | Jan 13, 2021 09:15 | Subject: | Re: Parts list by LEGO instruction Bag | Viewed: | 22 times | Topic: | Inventories | |
|
| In Inventories, keithmcgibbon writes:
| Hi,
I am building The big Millenium Falcon and want to sort the parts into bags as
they appear in the instructions. I can see the inventory for the total build,
but it would make building easier if I could sort the parts into the same bags
they come is as new. Does anyone have any suggestions for where I could get
parts list arranged this way?
thanks
|
Unless someone has already done it, then you will have to follow the manual part
by part but it takes some time for even a 1000 piece set. For the UCS MF, it
will take a long time!
|
|
Author: | paulvdb | Posted: | Jan 13, 2021 08:56 | Subject: | Re: Inventory Change Request for Set 70810-1 | Viewed: | 17 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, fortressbricks writes:
| Please make changes to the following inventory:
* Add 1 Part 40359a Pearl Gold Minifigure, Utensil Key
Comments from Submitter:
Shows in step 34 on page on 195 of instruction booklet
|
The key comes on a sprue and is already in the inventory.
[p=40359c01,115]
|
|
Author: | keithmcgibbon | Posted: | Jan 13, 2021 08:50 | Subject: | Parts list by LEGO instruction Bag | Viewed: | 51 times | Topic: | Inventories | Status: | Open | |
|
| Hi,
I am building The big Millenium Falcon and want to sort the parts into bags as
they appear in the instructions. I can see the inventory for the total build,
but it would make building easier if I could sort the parts into the same bags
they come is as new. Does anyone have any suggestions for where I could get
parts list arranged this way?
thanks
|
Author: | fortressbricks | Posted: | Jan 13, 2021 08:15 | Subject: | Inventory Change Request for Set 70810-1 | Viewed: | 36 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 40359a Pearl Gold Minifigure, Utensil Key
Comments from Submitter:
Shows in step 34 on page on 195 of instruction booklet
|
Author: | SimonBrix | Posted: | Jan 13, 2021 07:36 | Subject: | Inventory Change Request for Set 70425-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 28621pb0023 Trans-Neon Green Minifigure, Head Alien Ghost with Yellowish Green Face, Glasses, Angry and Flames in Back Pattern - Vented Stud (Alternate) (match ID 961484)
|
|
Author: | Hygrotus | Posted: | Jan 13, 2021 07:18 | Subject: | Re: Color verification part 40378 | Viewed: | 29 times | Topic: | Catalog | |
|
| In Catalog, infinibrix writes:
| In Catalog, eBricksOnline writes:
According to the Lego site as far as silver colours go it only shows up as:-
Description Silver Met.
Category Bricks, Special
Element 6097639
Design Number 40378
and Silver Metalic tranlates to Flat Silver on Bricklink but as already mentioned
not all parts/colours belong to a set or are catalogued on the Lego site indefinitely
The situation is then made worse by Bricklink not using Offical Lego colour names/references
which means people can translate them to the Bricklink site and colour palette
incorrectly and so although the part also shows up on BL in Pearl Light Gray
it may be that it only exists in Flat Silver or as Lego call it Silver Metalic.
This is another important reason why using Legos offical colour names should
take precedence over using colour names just because we like the sound of them
better?
|
https://www.bricklink.com/message.asp?ID=1098690
https://www.bricklink.com/message.asp?ID=1031456
|
|
Author: | infinibrix | Posted: | Jan 13, 2021 06:58 | Subject: | Re: Color verification part 40378 | Viewed: | 42 times | Topic: | Catalog | |
|
| In Catalog, eBricksOnline writes:
According to the Lego site as far as silver colours go it only shows up as:-
Description Silver Met.
Category Bricks, Special
Element 6097639
Design Number 40378
and Silver Metalic tranlates to Flat Silver on Bricklink but as already mentioned
not all parts/colours belong to a set or are catalogued on the Lego site indefinitely
The situation is then made worse by Bricklink not using Offical Lego colour names/references
which means people can translate them to the Bricklink site and colour palette
incorrectly and so although the part also shows up on BL in Pearl Light Gray
it may be that it only exists in Flat Silver or as Lego call it Silver Metalic.
This is another important reason why using Legos offical colour names should
take precedence over using colour names just because we like the sound of them
better?
|
|
Author: | tonnic | Posted: | Jan 13, 2021 05:47 | Subject: | Re: 10195 Dropship | Viewed: | 48 times | Topic: | Catalog | |
|
| In Catalog, fin_and_daddy writes:
| What is the point of this post?
|
Maybe just to make it more visual, visualization might help members too look
more into it and help you.
Just someone trying to be helpfull and friendly I guess.
| In Catalog, popsicle writes:
| In Catalog, fin_and_daddy writes:
| Hello, does anyone have a Wanted List for just the dropship from the 10195 set
please?
I've spent three evenings going through my manual and making a wanted list
from it, but accidentally deleted it after just finishing the first book. I'm
devastated!
If anyone has already made a list I would be very grateful if I could have a
copy!
|
|
|
|
|
Author: | fin_and_daddy | Posted: | Jan 13, 2021 05:26 | Subject: | Re: 10195 Dropship | Viewed: | 35 times | Topic: | Catalog | |
|
| You diamond! Thank you.
In Catalog, Stellar writes:
| In Catalog, fin_and_daddy writes:
| Hello, does anyone have a Wanted List for just the dropship from the 10195 set
please?
I've spent three evenings going through my manual and making a wanted list
from it, but accidentally deleted it after just finishing the first book. I'm
devastated!
If anyone has already made a list I would be very grateful if I could have a
copy!
|
In this page you can find the LXF file of the set someone made:
https://www.eurobricks.com/forum/index.php?/forums/topic/41226-key-topic-official-lego-sets-made-in-ldd/&page=102
You can import it to Stud.io and separate the ships there, then import the file
to a wanted list. It should then be easier to check if everything is correct
against instructions.
|
|
|
Author: | fin_and_daddy | Posted: | Jan 13, 2021 05:25 | Subject: | Re: 10195 Dropship | Viewed: | 62 times | Topic: | Catalog | |
|
| What is the point of this post?
In Catalog, popsicle writes:
| In Catalog, fin_and_daddy writes:
| Hello, does anyone have a Wanted List for just the dropship from the 10195 set
please?
I've spent three evenings going through my manual and making a wanted list
from it, but accidentally deleted it after just finishing the first book. I'm
devastated!
If anyone has already made a list I would be very grateful if I could have a
copy!
|
|
|
|
Author: | Stellar | Posted: | Jan 13, 2021 04:21 | Subject: | Re: 10195 Dropship | Viewed: | 54 times | Topic: | Catalog | |
|
| In Catalog, fin_and_daddy writes:
| Hello, does anyone have a Wanted List for just the dropship from the 10195 set
please?
I've spent three evenings going through my manual and making a wanted list
from it, but accidentally deleted it after just finishing the first book. I'm
devastated!
If anyone has already made a list I would be very grateful if I could have a
copy!
|
In this page you can find the LXF file of the set someone made:
https://www.eurobricks.com/forum/index.php?/forums/topic/41226-key-topic-official-lego-sets-made-in-ldd/&page=102
You can import it to Stud.io and separate the ships there, then import the file
to a wanted list. It should then be easier to check if everything is correct
against instructions.
|
|
Author: | yensid | Posted: | Jan 13, 2021 04:09 | Subject: | Inventory Change Request for Set 60174-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 47753pb105L Blue Wedge 4 x 4 No Studs with White 'POLICE' Pattern Model Left Side (Sticker) - Set 60174 (Counterpart)
* Add 1 Part 47753pb105R Blue Wedge 4 x 4 No Studs with White 'POLICE' Pattern Model Right Side (Sticker) - Set 60174 (Counterpart)
|
|
Author: | Roxyncz | Posted: | Jan 13, 2021 04:03 | Subject: | Inventory Change Request for Set 75934-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 2335pb221 White Flag 2 x 2 Square with 'GIFT SHOP', Lego Box and Dinosaur Pattern (Sticker) - Set 75934 (Counterpart)
* Add 1 Part 26603pb123 White Tile 2 x 3 with 'COMING SOON' and Dinosaur Pattern (Sticker) - Set 75934 (Counterpart)
|
|
Author: | yensid | Posted: | Jan 13, 2021 04:02 | Subject: | Inventory Change Request for Set 75204-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 2390pb004R Tan Tail 8 x 1 with Stepped Fin with Light Bluish Gray Decoration Pattern Model Right Side (Sticker) - Set 75204 (Counterpart)
* Add 1 Part 2390pb004L Tan Tail 8 x 1 with Stepped Fin with Light Bluish Gray Decoration Pattern Model Left Side (Sticker) - Set 75204 (Counterpart)
|
|
Author: | randyf | Posted: | Jan 13, 2021 02:26 | Subject: | Re: 30374 trans-purple color vary? | Viewed: | 40 times | Topic: | Colors | |
|
| In Colors, runner.caller writes:
| I've got 5 of the
in trans-purple.
3 of them appear lighter hue.
I see there is price guide info and a picture for the trans-light purple, but
it doesn't look like that color ever came in a set
Is there documentation that this part varies in this color?
|
Yes, this part comes in two different colors of transparent purple. One of them
is Trans-Purple and the other is Trans-Light Purple. The Trans-Light Purple one
was only used as the lightsaber blade for Mace Windu in
You can read the Additional Notes for the set on that page to understand why
it is not connected to the set through the catalog. (I strongly believe that
the light-up figures should have inventories.)
Cheers,
Randy
|
|
Author: | runner.caller | Posted: | Jan 13, 2021 00:23 | Subject: | 30374 trans-purple color vary? | Viewed: | 79 times | Topic: | Colors | Status: | Open | |
|
| I've got 5 of the
in trans-purple.
3 of them appear lighter hue.
I see there is price guide info and a picture for the trans-light purple, but
it doesn't look like that color ever came in a set
Is there documentation that this part varies in this color?
|
|
Author: | wildchicken13 | Posted: | Jan 12, 2021 23:17 | Subject: | Re: Looking for holders and wheels | Viewed: | 37 times | Topic: | Catalog | |
|
| In Catalog, sonnich writes:
The first thing that comes to mind is
You would have to use different wheels obviously, but the wheelbase would be
six studs wide. For wheels, maybe you could use
* | | 11208 Wheel 14mm D. x 9.9mm with Center Groove, Fake Bolts and 6 Double Spokes Parts: Wheel |
since it has spokes. Perhaps someone else here will have a better idea.
|
|
Author: | wildchicken13 | Posted: | Jan 12, 2021 22:27 | Subject: | Re: Sales tax suggestion | Viewed: | 34 times | Topic: | Suggestions | |
|
| In Suggestions, jonwil writes:
| Given all the posts about "why cant I ship to the US" and etc regarding the new
sales tax system, I think Bricklink should send a notice to all sellers (or all
sellers who ship to the USA and don't have onsite payment if that's possible)
telling them what they need to do regarding sales tax and onsite payment. I suspect
a lot of sellers just don't realize they need to use onsite payment because
of the new sales tax rules.
|
Yes! Almost every day there is a post from a seller that does not read the forum
and is confused why they can't ship to some state. A simple email explaining
the tax situation to all sellers would suffice; there does not need to be a new
email every time BrickLink begins collecting sales tax in a new state.
|
|
Author: | popsicle | Posted: | Jan 12, 2021 18:58 | Subject: | Re: 10195 Dropship | Viewed: | 70 times | Topic: | Catalog | |
|
| In Catalog, fin_and_daddy writes:
| Hello, does anyone have a Wanted List for just the dropship from the 10195 set
please?
I've spent three evenings going through my manual and making a wanted list
from it, but accidentally deleted it after just finishing the first book. I'm
devastated!
If anyone has already made a list I would be very grateful if I could have a
copy!
|
|
|
|
Author: | fin_and_daddy | Posted: | Jan 12, 2021 18:25 | Subject: | 10195 Dropship | Viewed: | 156 times | Topic: | Catalog | Status: | Open | |
|
| Hello, does anyone have a Wanted List for just the dropship from the 10195 set
please?
I've spent three evenings going through my manual and making a wanted list
from it, but accidentally deleted it after just finishing the first book. I'm
devastated!
If anyone has already made a list I would be very grateful if I could have a
copy!
|
Author: | SezaR | Posted: | Jan 12, 2021 17:41 | Subject: | Inventory Change Request for Set 379-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {3 to 4} Part Green 3741 Plant Flower Stem
* Change {1 to 2} Part Red 3742c01 Plant Flower Small, 4 on Sprue
|
Author: | Roxyncz | Posted: | Jan 12, 2021 16:56 | Subject: | Inventory Change Request for Set 75931-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 2431pb661 Yellow Tile 1 x 4 with Black and Yellow Danger Stripes (Yellow Corners) Pattern (Sticker) - Set 75931 (Counterpart)
|
Author: | jennnifer | Posted: | Jan 12, 2021 16:34 | Subject: | Re: Color verification part 40378 | Viewed: | 38 times | Topic: | Catalog | |
|
| In Catalog, eBricksOnline writes:
I just checked the one I have on hand and it is definitely Pearl: sparkly, pale,
marbled.
Flat Silver/Pearl Light Gray issues. I've long since given up on precision
as it's just one of those things.
Jen
|
|
Author: | randyf | Posted: | Jan 12, 2021 16:26 | Subject: | Re: Color verification part 40378 | Viewed: | 28 times | Topic: | Catalog | |
|
| In Catalog, eBricksOnline writes:
I would say it comes in both.
The parts from
would definitely be the "new" Flat Silver.
The parts from
and
were probably Pearl Light Gray.
Inventories can be wrong and the split between Pearl Light Gray and Flat Silver
in older inventories was a subjective call by each person doing an inventory
due to the varying nature of the color in different parts back then.
|
|
Author: | SylvainLS | Posted: | Jan 12, 2021 16:13 | Subject: | Re: Color verification part 40378 | Viewed: | 21 times | Topic: | Catalog | |
|
| In Catalog, Stuart9 writes:
| Looks like it comes in both.
A large number of sellers offering pearl light grey although it's not listed
in sets, not all of them will have listed them incorrectly.
Many items exist in colours not found in sets.
|
Sometimes, it’s also due to wrong inventories (colour not yet recognized…) that
were changed after the sellers put their parts in their stores.
Not saying it’s the case here, but it can happen.
|
|
Author: | jonwil | Posted: | Jan 12, 2021 16:09 | Subject: | Sales tax suggestion | Viewed: | 71 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Given all the posts about "why cant I ship to the US" and etc regarding the new
sales tax system, I think Bricklink should send a notice to all sellers (or all
sellers who ship to the USA and don't have onsite payment if that's possible)
telling them what they need to do regarding sales tax and onsite payment. I suspect
a lot of sellers just don't realize they need to use onsite payment because
of the new sales tax rules.
|
|
Author: | Stuart9 | Posted: | Jan 12, 2021 16:00 | Subject: | Re: Color verification part 40378 | Viewed: | 33 times | Topic: | Catalog | |
|
| Looks like it comes in both.
A large number of sellers offering pearl light grey although it's not listed
in sets, not all of them will have listed them incorrectly.
Many items exist in colours not found in sets.
In Catalog, eBricksOnline writes:
|
|
|
Author: | jennnifer | Posted: | Jan 12, 2021 14:58 | Subject: | Re: Alternative search terms or standardisation | Viewed: | 23 times | Topic: | Catalog | |
|
| In Catalog, DeLuca writes:
| In Catalog, MarauderDeuce writes:
| I was looking up ball socket, trying to find a part with no success.
When I did finally find the part I was looking for it was listed as having a
ball receptacle rather than socket.
Can these bricks have alternate search terms so that a search for Ball socket
will also turn up ball receptacle and vice versa?
Failing that, standardisation so that if we find the right term we'll actually
get all the matching parts.
|
The issue of Catalog name-standardisation is one that the Catmins have been working
on (with varying degrees of success, given its complexity).
BTW; I would suggest "Socket" for the standard term, because 1.) it is the most
accurate (this is a ball-and-socket joint), 2.) no one is going to see
this piece and search "Receptacle", and 3.) "Ball Receptacle" just sounds inappropriate.
😬
|
I like Socket better also.
Jen
|
|
Author: | Brickitty | Posted: | Jan 12, 2021 14:51 | Subject: | Inventory Change Request for Set 8167-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 32271pb022L Black Technic, Liftarm 1 x 9 Bent (7 - 3) Thick with Orange Flames Pattern Left Side A (Sticker) - Set 8167 (Counterpart)
* Add 1 Part 32271pb023L Black Technic, Liftarm 1 x 9 Bent (7 - 3) Thick with Orange Flames Pattern Left Side B (Sticker) - Set 8167 (Counterpart)
* Add 1 Part 32271pb022R Black Technic, Liftarm 1 x 9 Bent (7 - 3) Thick with Orange Flames Pattern Right Side A (Sticker) - Set 8167 (Counterpart)
* Add 1 Part 32271pb023R Black Technic, Liftarm 1 x 9 Bent (7 - 3) Thick with Orange Flames Pattern Right Side B (Sticker) - Set 8167 (Counterpart)
Comments from Submitter:
These were added to the catalog a month ago but haven't been assigned to the correct set yet.
|
|
Author: | DeLuca | Posted: | Jan 12, 2021 13:55 | Subject: | Re: Alternative search terms or standardisation | Viewed: | 24 times | Topic: | Catalog | |
|
| In Catalog, MarauderDeuce writes:
| I was looking up ball socket, trying to find a part with no success.
When I did finally find the part I was looking for it was listed as having a
ball receptacle rather than socket.
Can these bricks have alternate search terms so that a search for Ball socket
will also turn up ball receptacle and vice versa?
Failing that, standardisation so that if we find the right term we'll actually
get all the matching parts.
|
I have submitted change requests for all Technic parts that use "Ball Receptacle"
instead of "Ball Socket":
* | | 57910 Technic, Brick Modified 2 x 2 with Ball Socket and Axle Hole - Angled Forks with Round Ends and Open Sides Parts: Technic, Brick |
* | | 62712 Technic, Brick Modified 2 x 2 with Ball Socket and Axle Hole - Angled Forks with Flat Ends and Open Sides Parts: Technic, Brick |
* | | 92013 Technic, Brick Modified 2 x 2 with Ball Socket and Axle Hole - Straight Forks with Round Ends and Open Sides Parts: Technic, Brick |
* | | 92013pb001 Technic, Brick Modified 2 x 2 with Ball Socket and Axle Hole - Straight Forks with Round Ends and Open Sides with Danger Stripes and 'CRUSHING DANGER' Pattern (Sticker) - Set 7984 Parts: Technic, Brick |
* | | 92013pb002L Technic, Brick Modified 2 x 2 with Ball Socket and Axle Hole - Straight Forks with Round Ends and Open Sides with Yellow Grille and Black Lines Pattern Model Left Side (Sticker) - Set 70327 Parts: Technic, Brick |
* | | 92013pb002R Technic, Brick Modified 2 x 2 with Ball Socket and Axle Hole - Straight Forks with Round Ends and Open Sides with Yellow Grille and Black Lines Pattern Model Right Side (Sticker) - Set 70327 Parts: Technic, Brick |
|
|
Author: | DeLuca | Posted: | Jan 12, 2021 13:40 | Subject: | Re: Alternative search terms or standardisation | Viewed: | 20 times | Topic: | Catalog | |
|
| In Catalog, MarauderDeuce writes:
| I was looking up ball socket, trying to find a part with no success.
When I did finally find the part I was looking for it was listed as having a
ball receptacle rather than socket.
Can these bricks have alternate search terms so that a search for Ball socket
will also turn up ball receptacle and vice versa?
Failing that, standardisation so that if we find the right term we'll actually
get all the matching parts.
|
The issue of Catalog name-standardisation is one that the Catmins have been working
on (with varying degrees of success, given its complexity).
BTW; I would suggest "Socket" for the standard term, because 1.) it is the most
accurate (this is a ball-and-socket joint), 2.) no one is going to see
this piece and search "Receptacle", and 3.) "Ball Receptacle" just sounds inappropriate.
😬
|
|
Author: | Roxyncz | Posted: | Jan 12, 2021 13:18 | Subject: | Inventory Change Request for Set 41157-1 | Viewed: | 37 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3068bpb1493 Reddish Brown Tile 2 x 2 with Groove with Letter R, Rapunzel and Frederic Pattern (Sticker) - Set 41157 (Counterpart)
* Add 1 Part 3069bpb863 White Tile 1 x 2 with Groove with Leaves, Letter R and Writing Pattern (Sticker) - Set 41157 (Counterpart)
* Add 1 Part 87079pb830 Magenta Tile 2 x 4 with Owls and Appliques Pattern (Sticker) - Set 41157 (Counterpart)
* Add 2 Part 87079pb829 Magenta Tile 2 x 4 with Black Bird and Column Pattern (Sticker) - Set 41157 (Counterpart)
|
|
Author: | peregrinator | Posted: | Jan 12, 2021 12:55 | Subject: | Re: Inventorying Yellow Taxi | Viewed: | 31 times | Topic: | Catalog | |
|
| Thanks to the Catalog Admins for approving the sticker sheet
so quickly. Inventory of 40468-1 complete pending review
|
|
Author: | peregrinator | Posted: | Jan 12, 2021 11:53 | Subject: | Re: Inventorying Yellow Taxi | Viewed: | 29 times | Topic: | Catalog | |
|
| In Catalog, Turez writes:
| In Catalog, peregrinator writes:
| Hi all,
I'm in the midst of inventorying the new Yellow Taxi set (40468-1):
There is a new piece included (at least, I have not been able to find it). How
should this piece be categorized, do you think? Plate, modified, 2x2? Plate,
modified, 2x4? Adding this plus the sticker sheet should complete the inventory.
|
|
Ah, thank you! I was looking in the wrong place
|
|
Author: | Turez | Posted: | Jan 12, 2021 11:49 | Subject: | Re: Inventorying Yellow Taxi | Viewed: | 27 times | Topic: | Catalog | |
|
| In Catalog, peregrinator writes:
| Hi all,
I'm in the midst of inventorying the new Yellow Taxi set (40468-1):
There is a new piece included (at least, I have not been able to find it). How
should this piece be categorized, do you think? Plate, modified, 2x2? Plate,
modified, 2x4? Adding this plus the sticker sheet should complete the inventory.
|
|
|
Author: | peregrinator | Posted: | Jan 12, 2021 11:46 | Subject: | Inventorying Yellow Taxi | Viewed: | 57 times | Topic: | Catalog | Status: | Open | |
|
| Hi all,
I'm in the midst of inventorying the new Yellow Taxi set (40468-1):
There is a new piece included (at least, I have not been able to find it). How
should this piece be categorized, do you think? Plate, modified, 2x2? Plate,
modified, 2x4? Adding this plus the sticker sheet should complete the inventory.
|
|
|
Author: | GreatBuy | Posted: | Jan 12, 2021 11:20 | Subject: | Re: Alternative search terms or standardisation | Viewed: | 35 times | Topic: | Catalog | |
|
| In Catalog, MarauderDeuce writes:
| I was looking up ball socket, trying to find a part with no success.
When I did finally find the part I was looking for it was listed as having a
ball receptacle rather than socket.
Can these bricks have alternate search terms so that a search for Ball socket
will also turn up ball receptacle and vice versa?
Failing that, standardisation so that if we find the right term we'll actually
get all the matching parts.
|
This is an issue that comes up often. International standardization that appeases
everyone is not feasible without cluttering the catalogue with every possible
synonym people could potentially search for. That is not to say the entries are
perfect as they are, but it isn't a burning issue. Learn to search by part
numbers and use set inventories to find parts in the catalogue, it's a lot
easier.
|
|
Author: | cosmicray | Posted: | Jan 12, 2021 11:03 | Subject: | Re: Having US zones for shipping | Viewed: | 34 times | Topic: | Suggestions | |
|
| In Suggestions, Stellar writes:
| In Suggestions, FalconBricks writes:
| Could we have USPS zones for US shipping? This would make shipping more precise.
Brick Owl already has this feature.
|
Most countries have postal codes, so a zip range table setting for shipping would
work for most.
|
For the USA, that would not work. USPS zones are based on distances, between
shipper and destinations.
See here …
https://pe.usps.com/text/DMM300/608.htm#ep1271413
Nita Rae
|
|
Author: | cosmicray | Posted: | Jan 12, 2021 10:54 | Subject: | Re: Show customer location by order IP address | Viewed: | 25 times | Topic: | Suggestions | |
|
| In Suggestions, peregrinator writes:
| In Suggestions, Graham. writes:
| Would you please consider adding customer IP address country in order detail.
I've had a good number of orders going to freight forwarders usually in Delaware,
Florida and Oregon
I'd like to know what country the order is actually going to, showing the
customers geographic location based on where they ordered from would be helpful
Thanks
|
If BrickLink implemented this than people could get around it simply by using
a VPN
|
and then you get into the issue of people using smartphones, and the cell operator
is using CG-NAT, which means the physical location has very little relationship
to the IP address.
My IP address (for the moment) says that I'm in a small town about 90 miles
away.
Nita Rae
|
|
Author: | Stellar | Posted: | Jan 12, 2021 06:26 | Subject: | Re: New Macrotags for US Sales Tax on Invoices | Viewed: | 37 times | Topic: | Suggestions | |
|
| In Suggestions, TakeAbricK writes:
| I would like to see a new Macrotag and a new Conditional Block Macrotag, to create
correct Invoices for USA orders with 'US Sales Tax'
Conditional Block Macro Tag: Country = USA
So an Invoice will not show 'US Sales Tax' on the Invoice if Buyer lives
outside the USA.
Basic Macro Tag: Final Total
So an Invoice can show:
Grand Total: € 106.35 (US Sales Tax € 6.35 over € 100.00)
Diana
|
It ixists:
(ORDERSALESTAX-EQ:Y)
Sales Tax: (BASECURRENCYSIGN)(ORDERSALESTAX)(/ORDERSALESTAX-EQ:Y)
|
|
Author: | peter_heyden | Posted: | Jan 12, 2021 05:43 | Subject: | Re: New Macrotags for US Sales Tax on Invoices | Viewed: | 34 times | Topic: | Suggestions | |
|
| Hi Diana,
Using the Block Macro Tag works too. I've tested it,
live in Holland myself, and US sales tax shows on US invoices but not on e.g.
UK invoices.
Macro tag for Final Total would be highly appreciated.
Regards Peter.
|
Author: | StormChaser | Posted: | Jan 11, 2021 23:39 | Subject: | Re: Cylinder Hemisphere 3 x 3 Ball Turret Socket | Viewed: | 78 times | Topic: | Catalog | |
|
| In Catalog, The_RealRedHex writes:
| putting in a category change request?
|
Please do not request any category changes right now. They will not be approved.
We'll open a forum thread three weeks from today for our next movement of
parts that will happen in April. Mention any category changes you want to see
in that thread.
|
|
Author: | wildchicken13 | Posted: | Jan 11, 2021 23:38 | Subject: | Re: Cylinder Hemisphere 3 x 3 Ball Turret Socket | Viewed: | 27 times | Topic: | Catalog | |
|
| In Catalog, The_RealRedHex writes:
| Hello,
I was looking through some BrickLink categories and came to 'cylinder'.
In there I found piece 44358 and its counterpart. Together these form a sphere
and don't resemble a cylinder in any way. Does anyone have an explanation
for this, or is it worth me putting in a category change request?
Thanks in advance,
Theo - The_RealRedHex
|
https://www.bricklink.com/help.asp?helpID=1568
Cylinder - For relatively large tubes and spheres and the parts that
form these shapes.
I guess a sphere is a cylinder?
|
|
Author: | Hexy | Posted: | Jan 11, 2021 23:33 | Subject: | Cylinder Hemisphere 3 x 3 Ball Turret Socket | Viewed: | 53 times | Topic: | Catalog | Status: | Open | |
|
| Hello,
I was looking through some BrickLink categories and came to 'cylinder'.
In there I found piece 44358 and its counterpart. Together these form a sphere
and don't resemble a cylinder in any way. Does anyone have an explanation
for this, or is it worth me putting in a category change request?
Thanks in advance,
Theo - The_RealRedHex
|
|
Author: | Hexy | Posted: | Jan 11, 2021 22:50 | Subject: | Re: Alternative search terms or standardisation | Viewed: | 26 times | Topic: | Catalog | |
|
| Hello,
I have done some research in the catalog about the difference between a ball
socket and a ball receptacle. The results for both a receptacle and a socket
were different yet had the same common element. I will put in some requests to
tweak some of these items to create a clearer common title between these parts.
Regarding your question about alternate searches, I am not aware of any ways
to do this, however it would be a great addition to searching experience. To
be honest, I think this is more of a communication problem between the people
who have named these items.
Kind Regards,
Theo - The_RealRedHex
| In Catalog, MarauderDeuce writes:
I was looking up ball socket, trying to find a part with no success.
When I did finally find the part I was looking for it was listed as having a
ball receptacle rather than socket.
Can these bricks have alternate search terms so that a search for Ball socket
will also turn up ball receptacle and vice versa?
Failing that, standardisation so that if we find the right term we'll actually
get all the matching parts.
|
|
|
Author: | MarauderDeuce | Posted: | Jan 11, 2021 22:15 | Subject: | Alternative search terms or standardisation | Viewed: | 61 times | Topic: | Catalog | Status: | Open | |
|
| I was looking up ball socket, trying to find a part with no success.
When I did finally find the part I was looking for it was listed as having a
ball receptacle rather than socket.
Can these bricks have alternate search terms so that a search for Ball socket
will also turn up ball receptacle and vice versa?
Failing that, standardisation so that if we find the right term we'll actually
get all the matching parts.
|
|
|
Author: | PotterMoreBrick | Posted: | Jan 11, 2021 19:25 | Subject: | Inventory Change Request for Set 75291-1 | Viewed: | 33 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 10 Part 44861 Dark Bluish Gray Plate, Modified 1 x 2 with Open O Clip on Top (Alternate) (match ID 1035448 )
Comments from Submitter:
10 Sealed sets all contained 44861 instead of 92280
|
|
Author: | popsicle | Posted: | Jan 11, 2021 17:21 | Subject: | Re: Stores located near by | Viewed: | 33 times | Topic: | Suggestions | |
|
| In Suggestions, wildchicken13 writes:
| In Suggestions, Grosoleil writes:
| In Suggestions, popsicle writes:
| In Suggestions, Brick_Qc writes:
| In Suggestions, Grosoleil writes:
| I would like to see which stores are close to me where I could maybe pick up
bigger pieces.
Maybe a map in the search store window
|
Sorry, won't work, has been asked before, admin don't want to. To easy
then to bypass BL and make purchases directly.
|
Yeah, it's suggested from time to time. I like the idea as an option for
sellers, and not a default setting.
I don't know about the reasoning though. Other, arguably more guarded sites,
have the option to view vendors by distance from user. Without checking, I believe
eBay still does?
|
I just want to save on shipping, not avoid BrickLink... too bad..
|
You could always message the seller and ask them what city they are located in.
|
I've had my share of those potential buyers over the years. Sometimes after
a purchase or two and they know how closely located we are, I'll get the
in person request.
|
|
Author: | wildchicken13 | Posted: | Jan 11, 2021 17:00 | Subject: | Re: Stores located near by | Viewed: | 26 times | Topic: | Suggestions | |
|
| In Suggestions, Grosoleil writes:
| In Suggestions, popsicle writes:
| In Suggestions, Brick_Qc writes:
| In Suggestions, Grosoleil writes:
| I would like to see which stores are close to me where I could maybe pick up
bigger pieces.
Maybe a map in the search store window
|
Sorry, won't work, has been asked before, admin don't want to. To easy
then to bypass BL and make purchases directly.
|
Yeah, it's suggested from time to time. I like the idea as an option for
sellers, and not a default setting.
I don't know about the reasoning though. Other, arguably more guarded sites,
have the option to view vendors by distance from user. Without checking, I believe
eBay still does?
|
I just want to save on shipping, not avoid BrickLink... too bad..
|
You could always message the seller and ask them what city they are located in.
|
|
Author: | Grosoleil | Posted: | Jan 11, 2021 16:24 | Subject: | Re: Stores located near by | Viewed: | 37 times | Topic: | Suggestions | |
|
| In Suggestions, popsicle writes:
| In Suggestions, Brick_Qc writes:
| In Suggestions, Grosoleil writes:
| I would like to see which stores are close to me where I could maybe pick up
bigger pieces.
Maybe a map in the search store window
|
Sorry, won't work, has been asked before, admin don't want to. To easy
then to bypass BL and make purchases directly.
|
Yeah, it's suggested from time to time. I like the idea as an option for
sellers, and not a default setting.
I don't know about the reasoning though. Other, arguably more guarded sites,
have the option to view vendors by distance from user. Without checking, I believe
eBay still does?
|
I just want to save on shipping, not avoid BrickLink... too bad..
|
|
Author: | DeLuca | Posted: | Jan 11, 2021 14:17 | Subject: | Re: Figure Titling Guidelines (DeLuca) | Viewed: | 28 times | Topic: | Catalog | |
|
| In Catalog Requests, DeLuca writes:
| In Catalog Requests, StormChaser writes:
Sources for "Skeleton Drone" and "Ice Drone" (still nothing for "Super Ice Drone", but I will keep looking):
|
Super Ice Drone! (Though Flex is misidentified as Zed in the description 😐):
|
|
Author: | DeLuca | Posted: | Jan 11, 2021 14:04 | Subject: | Re: Figure Titling Guidelines (DeLuca) | Viewed: | 21 times | Topic: | Catalog | |
|
| In Catalog Requests, StormChaser writes:
Sources for "Skeleton Drone" and "Ice Drone" (still nothing for "Super Ice Drone",
but I will keep looking):
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|