Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | randyf | Posted: | Mar 22, 2020 20:49 | Subject: | Re: Inventory Change Request for Set 5512-1 | Viewed: | 27 times | Topic: | Inventories Requests | |
|
| Phew! Okay, we finally are on the same page.
Thanks for your patience and help, Mauro. I will get these processed.
Cheers,
Randy
In Inventories Requests, 1977_mauro writes:
| Randy,
you are right, as there was previously no alternate part for the whites, it does
not make sense to add white 3794b as alternate.
Thanks
Mauro
In Inventories Requests, randyf writes:
| In Inventories Requests, 1977_mauro writes:
| Randy, it was not a mistake but I did not want to complicate the inventory change
- as the regular part was already established as an alternate one.
|
But you said *all* of your sets came with *all* white 3794a. If they *all* came
with *all* white 3794a and you didn't get any white 3794b, why would you
ask to add any white 3794b as alternates? It doesn't make sense. There is
no established white 3794a or 3794b in the set, just one undetermined entry that
should just be replaced with what you found. Right?
| But when we get now rid off of the undertermined entries, I would just simly
add my findings as regular ones and fully skip the alternate ones.
Mauro
In Inventories Requests, randyf writes:
| Thanks, Mauro!
So it was a mistake on your part to ask to add 3794b in white as an alternate?
And are we sure we need to keep 3794a in red in the Regular Items section?
Cheers,
Randy
In Inventories Requests, 1977_mauro writes:
| Hi Randy,
in ALL 3 boxes there were the SAME mix up of these parts:
ALL red ones came as 3794b.
ALL white ones came as 3794a.
It seems that this was the standard for these boxes as I have bought all 3 from
different sources.
Regards
Mauro
In Inventories Requests, randyf writes:
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 2 Part 3794b White Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 5)
* Change 2 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part White {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} {match ID 0 to 5}
Comments from Submitter:
From 3 sealed sets, the red part was 3794b, during the white part was 3794b. The undertermined version is not required here anymore.
|
I am sorry if I am still confused by your statements, but can I ask you to just
answer these questions with a 'yes' or 'no'?
Did you find any 3794a in red in any of the three sets you parted
out?
Did you find any 3794b in red in any of the three sets you parted
out?
Did you find any 3794a in white in any of the three sets you parted
out?
Did you find any 3794b in white in any of the three sets you parted
out?
Thanks,
Randy
|
|
|
|
|
|
|
|
Author: | jennnifer | Posted: | Mar 22, 2020 20:14 | Subject: | Re: Inventory Change Request for Set 76052-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, golferdanc writes:
| Please make changes to the following inventory:
* Add 2 Part 6178 Reddish Brown Tile, Modified 6 x 12 with Studs on Edges
Comments from Submitter:
Instruction booklet pages 61 & 62 show this tile, modified to start the exterior of the batcave.
|
I believe you are referring to these:
|
|
Author: | kitajib | Posted: | Mar 22, 2020 20:12 | Subject: | Inventory Change Request for Set 75002-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 75937 White Plate, Modified 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs
Comments from Submitter:
Item shows on Lego online instructions, but is not included in the list of Bricklink parts
|
|
Author: | drg7949 | Posted: | Mar 22, 2020 19:36 | Subject: | Re: search including parts in a part or in a set | Viewed: | 31 times | Topic: | Suggestions | |
|
| This post has been around for a while, but it's exactly the enhancement I'd
like to see implemented.
Example: If I have a particular torso on my wantlist, and I'm shopping for
parts, I'd also like to see any minifigs for sale that have that torso.
There's a good chance I might buy the fig instead.
Thanks.
In Suggestions, TomHop writes:
| After a brief search I could not find anything on the following, so there goes
my first post.
Sometimes I have parts like a hinge plate 1 x 2 with 1 finger (the old hinges)
on my wanted list.
This can be found
- as such , just this part
- in a parts assembly (together with the 2 finger hinge plate)
- in a set
If I search for any directly I can find them, no problem.
Nevertheless an option like "include part assembly in search" and/or "include
sets in search" would save me doing 3 different searches, besides possibly adding
all possible combinations to my wanted lists (risking missing out on a good purchase
or duplicating parts).
I would expect an option like this in the wanted list, (search and shop options),
shop search and catalog search for example.
To avoid massive search results ( if you have big wanted lists and/or very common
parts on the wanted list) a tickbox could be added at wanted list item level:
to indicate whether you want this to be eligable for the above options or not.
I am looking for feedback on the idea. Did I simply mis an option that I can
use? How can I propose it to the administrators?
Thanks for reading and feedback is really apreciated
Best regards,
Tom
|
|
|
Author: | randyf | Posted: | Mar 22, 2020 16:58 | Subject: | Re: Inventory Change Request for Set 725-2 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Add 1 Part BA115pb01L Black Stickered Assembly 8 x 1 x 2 with White 'DB 725' Pattern Model Left Side (Sticker) - Set 725-2 - 1 Brick 1 x 6, 1 Brick 1 x 8 (Counterpart)
* Add 1 Part BA115pb01R Black Stickered Assembly 8 x 1 x 2 with White 'DB 725' Pattern Model Right Side (Sticker) - Set 725-2 - 1 Brick 1 x 6, 1 Brick 1 x 8 (Counterpart)
|
Question for you, Reza.
In this set, do you think that there are really 2x
Looking at the instructions and assuming the stickers are symmetrical on both
sides of the car, shouldn't one of the stickers be applied to a
Thanks,
Randy
|
Randy,
I am not sure what you mean by "symmetry" so I studies all the symmetries of
this car. See photo attached.
The reflection along the yellow line is one symmetry, but we can surely assume
that there is no preference between the front and back of this car so we get
a reflection along the red line. Overall, the group of symmetries of this car
has four elements and its group structure is
Z/2Z + Z/2Z
This group is not cyclic and depending on the symetry we choose, we can get four
different answers.
Sorry, I know my presentation is too simple and is not at the level of complexity
of your question but this is the best I could do.
Cheers,
Reza
|
Hi Reza!
Okay, look at the image below. The left side shows the car from the instructions
with the "TRANSPORT" sticker attached on one door. The right side shows the car
mirrored to simulate the opposite side of the car. Therefore, shouldn't the
"TRANSPORT" sticker on that side be on the
instead of having two
listed in the inventory?
Cheers,
Randy
|
|
|
Author: | popsicle | Posted: | Mar 22, 2020 16:56 | Subject: | Re: Clips Ahoy, part three. | Viewed: | 157 times | Topic: | Catalog | |
|
| In Catalog, runner.caller writes:
| In Catalog, popsicle writes:
| In Catalog, mfav writes:
A very nice site you’re constructing. The detail of information and quality is
amazing!
I’m curious though, why do all of the active links on your fup page, link
to Law’s site, Brick Owl?
|
I didn't even notice that they did that because I never clicked on the links.
Why draw more attention to it?
|
"Why draw more attention to it?" Presupposes something to hide. I didn't
think there was, did you? No, I continue to be my overly-nosey self, is all.
What a strange question, though.
|
|
Author: | BrickWYBrick | Posted: | Mar 22, 2020 16:36 | Subject: | Inventory Change Request for Set 76052-1 | Viewed: | 35 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 6178 Reddish Brown Tile, Modified 6 x 12 with Studs on Edges
Comments from Submitter:
Instruction booklet pages 61 & 62 show this tile, modified to start the exterior of the batcave.
|
|
Author: | runner.caller | Posted: | Mar 22, 2020 16:05 | Subject: | Re: Clips Ahoy, part three. | Viewed: | 83 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| In Catalog, popsicle writes:
| In Catalog, mfav writes:
A very nice site you’re constructing. The detail of information and quality is
amazing!
I’m curious though, why do all of the active links on your fup page, link
to Law’s site, Brick Owl?
|
That is a very good and important question.
|
|
|
Author: | runner.caller | Posted: | Mar 22, 2020 15:58 | Subject: | Re: Clips Ahoy, part three. | Viewed: | 90 times | Topic: | Catalog | |
|
| In Catalog, popsicle writes:
| In Catalog, mfav writes:
A very nice site you’re constructing. The detail of information and quality is
amazing!
I’m curious though, why do all of the active links on your fup page, link
to Law’s site, Brick Owl?
|
I didn't even notice that they did that because I never clicked on the links.
Why draw more attention to it?
|
Author: | Adjour | Posted: | Mar 22, 2020 15:07 | Subject: | Re: Clips Ahoy, part three. | Viewed: | 78 times | Topic: | Catalog | |
|
| In Catalog, mfav writes:
These are spectacular. I would love to have such skills.
|
Author: | Bobflip | Posted: | Mar 22, 2020 13:41 | Subject: | Inventory Change Request for Set 75877-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3069bpb772 Dark Bluish Gray Tile 1 x 2 with Groove with Double Yellow Stripes Pattern (Sticker) - Set 75877 (Counterpart)
* Add 1 Part 87079pb695 Dark Bluish Gray Tile 2 x 4 with Double Yellow Stripes Pattern (Sticker) - Set 75877 (Counterpart)
|
|
Author: | Bobflip | Posted: | Mar 22, 2020 13:36 | Subject: | Inventory Change Request for Set 75877-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 11291pb06 Dark Bluish Gray Wedge 3 x 4 x 2/3 Cutout with Double Yellow Stripes Pattern (Sticker) - Set 75877 (Counterpart)
|
Author: | StormChaser | Posted: | Mar 22, 2020 12:37 | Subject: | Re: Sets 1045-2 and 1050-2 | Viewed: | 43 times | Topic: | Inventories | |
|
| In Inventories, SezaR writes:
| Based on what facts
did you decide that the content is not true and original?
|
Your original post confused me because of the way you worded it. Once I reread
it a couple of times carefully, then I understood what you were trying to say.
|
|
Author: | crazylegoman | Posted: | Mar 22, 2020 11:55 | Subject: | Re: Wheel plate stuck on car chassis piece | Viewed: | 39 times | Topic: | Catalog | |
|
| In Catalog, randyf writes:
| In Catalog, crazylegoman writes:
| randyf, the part is definitely made up of 3 separate parts (1 of the main chassis,
and 2 of the modified 2X2 plates.) Each of the 3 parts has a molded part number
that you can see on the underside.
|
What I meant to say was that the part comes as one complete unit in the sets
directly from LEGO and is counted as one part by LEGO. There is no need to assemble
it, and it is not meant to be disassembled. I was rushing through messages before,
so I didn't explain it well enough.
Cheers,
Randy
|
That makes sense. I did have a strong suspicion that the parts came pre-assembled
in sets, since that chassis is a juniorized part (for young kids), and the precise
force that would be required to put the 2X2 modified plates on the underside
looked like something that would take adult level effort.
Thanks,
David
|
|
Author: | popsicle | Posted: | Mar 22, 2020 11:50 | Subject: | Re: Clips Ahoy, part three. | Viewed: | 120 times | Topic: | Catalog | |
|
| In Catalog, legoman77 writes:
| In Catalog, mfav writes:
| In Catalog, popsicle writes:
| I’m curious though, why do all of the active links on your fup page, link
to Law’s site, Brick Owl?
|
With all due respect, it's none of your business.
|
Ouch! They are two good guys. That is the nicest you can be?
|
Thanks, John.
Russell may be a good guy, but what are you trying to do, ruin my hard-earned
reputation! I've been working on how many ignore lists I can get onto, I
was doing good
I like picturing all those using the ignore feature, covering their ears and
chanting la la la la la
|
|
Author: | dadebrick | Posted: | Mar 22, 2020 10:30 | Subject: | Inventory Change Request for Set 42063-1 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 64683pb053 Black Technic, Panel Fairing # 3 Small Smooth Long, Side A with BMW Logo Pattern (Sticker) - Set 42063 (Counterpart)
* Add 1 Part 64391pb053 Black Technic, Panel Fairing # 4 Small Smooth Long, Side B with BMW Logo Pattern (Sticker) - Set 42063 (Counterpart)
* Add 1 Part 24116pb011 Trans-Clear Technic, Panel Curved 3 x 6 x 3 with Speedometer & Gauges Pattern on Inside (Sticker) - Set 42063 (Counterpart)
* Add 1 Part 24116pb012L Light Bluish Gray Technic, Panel Curved 3 x 6 x 3 with 'GS' Pattern On Inside Model Left Side (Sticker) - Set 42063 (Counterpart)
* Add 1 Part 24116pb012R Light Bluish Gray Technic, Panel Curved 3 x 6 x 3 with 'GS' Pattern On Inside Model Right Side (Sticker) - Set 42063 (Counterpart)
* Add 1 Part 11946pb034 Blue Technic, Panel Fairing #21 Very Small Smooth, Side B with 'R1200' Pattern (Sticker) - Set 42063 (Counterpart)
* Add 1 Part 11947pb034 Blue Technic, Panel Fairing #22 Very Small Smooth, Side A with 'R1200' Pattern (Sticker) - Set 42063 (Counterpart)
* Add 1 Part 32316pb032L Light Bluish Gray Technic, Liftarm 1 x 5 Thick with 'BMW' Pattern Model Left Side (Sticker) - Set 42063 (Counterpart)
* Add 1 Part 32316pb032R Light Bluish Gray Technic, Liftarm 1 x 5 Thick with 'BMW' Pattern Model Right Side (Sticker) - Set 42063 (Counterpart)
* Add 1 Part 32316pb033 Light Bluish Gray Technic, Liftarm 1 x 5 Thick with Centered 'BMW' Pattern (Sticker) - Set 42063 (Counterpart)
* Add 1 Part 3068bpb1310 Black Tile 2 x 2 with Groove with 'R1200 GS' Pattern (Sticker) - Set 42063 (Counterpart)
|
|
Author: | Heartbricker | Posted: | Mar 22, 2020 10:07 | Subject: | Re: Clips Ahoy, part three. | Viewed: | 90 times | Topic: | Catalog | |
|
| In Catalog, Captain_Q writes:
| In Catalog, Heartbricker writes:
| In Catalog, mfav writes:
Wondering what type camera/filters/editing programs you're using?
Your closeup pictures come out amazingly detailed.
|
In Catalog, Leftoverbricks writes:
| Mfav (Mark) has been suspended from the forum so we will not know.
|
Hopefully not for long. But perhaps I can shed some insight as I have a background
as a photographer/videographer.
I can't say what camera, but for pictures like this a macro lens is required
to get close in shots with tiny objects like Lego. If Mark is using a DSLR of
some kind or comparable then shooting uncompressed photos will retain sharper
images.
I can't say what filters Mark used, but a polarizer filter can help greatly
with reducing reflective / semi-reflective surfaces like Lego.
And Mark is most likely using a light box of some sort or using white surfaces
of some kind to bounce the light for even lighting/softer shadowing.
Hopefully Mark will be back to elaborate but hopefully this information is helpful
in the meantime.
-Quinton
|
Very helpful, thank you for the explanation. I’m ashamed to say that I have all
the dslr equipment but have not been using it for a couple of years.
Thank you Quinton,
Stay safe
|
|
Author: | manganschlamm | Posted: | Mar 22, 2020 09:40 | Subject: | Re: Clips Ahoy, part three. | Viewed: | 93 times | Topic: | Catalog | |
|
| In Catalog, manganschlamm writes:
| In Catalog, mfav writes:
Great work, very helpful and instructive, keep on doing your excellent work,
wherever it may appear.
Keep making these wonderful cartoons as well.
|
I think a cartoon with an individual named Tomás de Torquemada would make a lot
of sense.
|
|
Author: | axaday | Posted: | Mar 22, 2020 09:35 | Subject: | Inventory Change Request for Set 8299-1 | Viewed: | 33 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 5102c80 Blue Hose, Pneumatic 4mm D. 80L / 64.0cm
* Delete 1 Part 5102c20 Blue Hose, Pneumatic 4mm D. 20L / 16.0cm
* Delete 1 Part 5102c24 Blue Hose, Pneumatic 4mm D. 24L / 19.2cm
* Add 1 Part 5102c54 Light Gray Hose, Pneumatic 4mm D. 54L / 43.2cm
* Delete 1 Part 5102c13 Light Gray Hose, Pneumatic 4mm D. 13L / 10.4cm
* Delete 1 Part 5102c18 Light Gray Hose, Pneumatic 4mm D. 18L / 14.4cm
* Add 2 Part 3647 Light Gray Technic, Gear 8 Tooth (Extra)
* Change 1 Part Yellow {75c21 Hose, Rigid 3mm D. 21L / 16.8cm to 75c20 Hose, Rigid 3mm D. 20L / 16.0cm}
Comments from Submitter:
My box was not sealed, but the bags were. The hoses were not inside bags, so I'm floating this out there and reasonable confidence. The hoses were meant to be cut to the lengths in the instructions (which match what the inventory currently says). My rigid hose was 1 stud short of what the inventory shows and was in a sealed bag. The gears were in a sealed bag too, which is strange because they aren't in the instructions anywhere. I am guessing that the bag of little parts is common to more than one set.
|
|
Author: | manganschlamm | Posted: | Mar 22, 2020 09:14 | Subject: | Re: Clips Ahoy, part three. | Viewed: | 80 times | Topic: | Catalog | |
|
| In Catalog, mfav writes:
Great work, very helpful and instructive, keep on doing your excellent work,
wherever it may appear.
Keep making these wonderful cartoons as well.
|
Author: | BricksThatStick | Posted: | Mar 22, 2020 09:01 | Subject: | Re: 9498 - Complete Inventory | Viewed: | 27 times | Topic: | Inventories | |
|
| In Inventories, StarBrick writes:
I think they mean the set they bought is incomplete as the inventory on here
has been verified as well.
In which case to the OP you need to create a wanted list with the missing parts
on it and then use that wanted list to buy the parts:
https://www.bricklink.com/help.asp?helpID=1
If you need any more help just post on here
|
|
Author: | axaday | Posted: | Mar 22, 2020 09:00 | Subject: | Re: 9498 - Complete Inventory | Viewed: | 19 times | Topic: | Inventories | |
|
| In Inventories, RochLeader1 writes:
| Hi,
I've just got a set 9498.
But when checking parts and instructions on you site, I see it is far from complete.
How can I help to complete at least the inventory part?
Regards,
Roch Leader
|
What sort of problems are there?
|
|
Author: | Teup | Posted: | Mar 22, 2020 08:54 | Subject: | Re: Clips Ahoy, part three. | Viewed: | 87 times | Topic: | Catalog | |
|
| In Catalog, Captain_Q writes:
| In Catalog, Admin_Russell writes:
| In Catalog, popsicle writes:
| In Catalog, mfav writes:
A very nice site you’re constructing. The detail of information and quality is
amazing!
I’m curious though, why do all of the active links on your fup page, link
to Law’s site, Brick Owl?
|
That is a very good and important question.
|
I am curious now. Is this allowed? Because the links were not directly shared
of BO but overall this seems like a conflict on interest with the TOS? Yeah,
no?
|
Well I think this is just something "they don't like". I also mentioned Br*ckOwl
somewhere just to explain a point and it got removed or something like that
(don't recall clearly, but it was an issue).
It always makes me feel weird when Bricklink is being all "shhhh don't mention
to people that Br*ckOwl exists". I can only see that as Bricklink calling itself
a bad marketplace. It would make Bricklink look a lot better and professional
if they acknowledged AFOLs use different sites and tools at the same time and
didn't go all "shhh!".
Btw Mark I read your response on your page and I agree. It is not about "picking
a side" at all.
|
|
Author: | StarBrick | Posted: | Mar 22, 2020 08:30 | Subject: | Re: 9498 - Complete Inventory | Viewed: | 20 times | Topic: | Inventories | |
|
| In Inventories, RochLeader1 writes:
| Hi,
I've just got a set 9498.
But when checking parts and instructions on you site, I see it is far from complete.
How can I help to complete at least the inventory part?
Regards,
Roch Leader
|
https://www.bricklink.com/catalogInvChange.asp?itemType=S&itemNo=9498-1 ?
|
Author: | RochLeader1 | Posted: | Mar 22, 2020 08:17 | Subject: | 9498 - Complete Inventory | Viewed: | 72 times | Topic: | Inventories | Status: | Open | |
|
| Hi,
I've just got a set 9498.
But when checking parts and instructions on you site, I see it is far from complete.
How can I help to complete at least the inventory part?
Regards,
Roch Leader
|
|
Author: | Elvys | Posted: | Mar 22, 2020 07:58 | Subject: | Re: Inventory Change Request for Set 21042-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| In Inventories Requests, Turez writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Turez writes:
| I can check the other parts if needed, the set is still built up in its box.
|
Please do. It may be a regional thing, since the inventory was submitted by someone
here in the States, and it was confirmed by someone here in the States (both
of them are recognized contributors to BrickLink). When I was checking some speed
builds on YouTube from people not in the States, I seemed to see some evidence
of the extra baby bows with cut corners.
|
Okay, I have checked the set and can confirm the extra slope and wedges, but
not the extra 1x2 plate.
Additional evidence: https://youtu.be/R6xVJdlFl6g?t=87
Regards,
Jonas
|
Beautiful, Jonas! Thanks! 😄
|
I can confirm the extra 1x2 plate was my mistake. Sorry!! 😓
|
|
Author: | 1977_mauro | Posted: | Mar 22, 2020 07:22 | Subject: | Re: Inventory Change Request for Set 5512-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
|
| Randy,
you are right, as there was previously no alternate part for the whites, it does
not make sense to add white 3794b as alternate.
Thanks
Mauro
In Inventories Requests, randyf writes:
| In Inventories Requests, 1977_mauro writes:
| Randy, it was not a mistake but I did not want to complicate the inventory change
- as the regular part was already established as an alternate one.
|
But you said *all* of your sets came with *all* white 3794a. If they *all* came
with *all* white 3794a and you didn't get any white 3794b, why would you
ask to add any white 3794b as alternates? It doesn't make sense. There is
no established white 3794a or 3794b in the set, just one undetermined entry that
should just be replaced with what you found. Right?
| But when we get now rid off of the undertermined entries, I would just simly
add my findings as regular ones and fully skip the alternate ones.
Mauro
In Inventories Requests, randyf writes:
| Thanks, Mauro!
So it was a mistake on your part to ask to add 3794b in white as an alternate?
And are we sure we need to keep 3794a in red in the Regular Items section?
Cheers,
Randy
In Inventories Requests, 1977_mauro writes:
| Hi Randy,
in ALL 3 boxes there were the SAME mix up of these parts:
ALL red ones came as 3794b.
ALL white ones came as 3794a.
It seems that this was the standard for these boxes as I have bought all 3 from
different sources.
Regards
Mauro
In Inventories Requests, randyf writes:
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 2 Part 3794b White Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 5)
* Change 2 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part White {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} {match ID 0 to 5}
Comments from Submitter:
From 3 sealed sets, the red part was 3794b, during the white part was 3794b. The undertermined version is not required here anymore.
|
I am sorry if I am still confused by your statements, but can I ask you to just
answer these questions with a 'yes' or 'no'?
Did you find any 3794a in red in any of the three sets you parted
out?
Did you find any 3794b in red in any of the three sets you parted
out?
Did you find any 3794a in white in any of the three sets you parted
out?
Did you find any 3794b in white in any of the three sets you parted
out?
Thanks,
Randy
|
|
|
|
|
|
|
Author: | Legoboy_II | Posted: | Mar 22, 2020 06:53 | Subject: | Re: Clips Ahoy, part three. | Viewed: | 81 times | Topic: | Catalog | |
|
| In Catalog, WoutR writes:
| In Catalog, StarBrick writes:
| In Catalog, WoutR writes:
|
Banning a member for placing links on an external website would be childish.
If that is the only reason for a ban, then it is unacceptable.
|
I think that was not the real reason, but hey, I can't read minds (yet...)
|
I hope it is not.
|
I have read the email the admin sent the now banned member, there were no violations
cited...
|
|
Author: | SezaR | Posted: | Mar 22, 2020 06:33 | Subject: | Re: Sets 1045-2 and 1050-2 | Viewed: | 35 times | Topic: | Inventories | |
|
| In Inventories, StormChaser writes:
| In Inventories, SezaR writes:
| What parts are self-contradictory?
|
I was confused on this. I can see when I reread your post that you were presenting
a series of different possibilities, instead of one idea backed up by three facts
as I originally read your post. So ignore what I said here.
No, the contents of your set are not true and original. Your statements are
self-contradictory.
|
It took me significant efforts to buy these two sets from overseas, convince
the seller to ship them and buy for him a shipping label. It also took me few
hours to check the contents of the two sets and find the differences with the
inventory on BL. I did them for these two sets because it is very hard to find
them in new condition.
Overall I considered all possibilities and so I believe that the contents are
new and original.
I am not sure why you undermine my efforts by giving a one-line proposition that
the contents of my sets are not true and original. Have you seen any photos of
them? The majority of parts in one set are in sealed bags. Based on what facts
did you decide that the content is not true and original?
|
|
Author: | WoutR | Posted: | Mar 22, 2020 06:03 | Subject: | Re: Clips Ahoy, part three. | Viewed: | 84 times | Topic: | Catalog | |
|
| In Catalog, StarBrick writes:
| In Catalog, WoutR writes:
|
Banning a member for placing links on an external website would be childish.
If that is the only reason for a ban, then it is unacceptable.
|
I think that was not the real reason, but hey, I can't read minds (yet...)
|
I hope it is not.
|
Author: | StarBrick | Posted: | Mar 22, 2020 05:31 | Subject: | Re: Clips Ahoy, part three. | Viewed: | 71 times | Topic: | Catalog | |
|
| In Catalog, WoutR writes:
|
Banning a member for placing links on an external website would be childish.
If that is the only reason for a ban, then it is unacceptable.
|
I think that was not the real reason, but hey, I can't read minds (yet...)
|
|
Author: | WoutR | Posted: | Mar 22, 2020 05:16 | Subject: | Re: Clips Ahoy, part three. | Viewed: | 93 times | Topic: | Catalog | |
|
| In Catalog, mfav writes:
| In Catalog, popsicle writes:
| I’m curious though, why do all of the active links on your fup page, link
to Law’s site, Brick Owl?
|
With all due respect, it's none of your business.
|
As people, we can be interested. But I have to agree. It is none of our businesses
and not Bricklink's businesses either. What links he places on his own, external
website is his choice.
Banning a member for placing links on an external website would be childish.
If that is the only reason for a ban, then it is unacceptable.
|
|
Author: | SezaR | Posted: | Mar 22, 2020 04:15 | Subject: | Re: Inventory Change Request for Set 725-2 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Add 1 Part BA115pb01L Black Stickered Assembly 8 x 1 x 2 with White 'DB 725' Pattern Model Left Side (Sticker) - Set 725-2 - 1 Brick 1 x 6, 1 Brick 1 x 8 (Counterpart)
* Add 1 Part BA115pb01R Black Stickered Assembly 8 x 1 x 2 with White 'DB 725' Pattern Model Right Side (Sticker) - Set 725-2 - 1 Brick 1 x 6, 1 Brick 1 x 8 (Counterpart)
|
Question for you, Reza.
In this set, do you think that there are really 2x
Looking at the instructions and assuming the stickers are symmetrical on both
sides of the car, shouldn't one of the stickers be applied to a
Thanks,
Randy
|
Randy,
I am not sure what you mean by "symmetry" so I studies all the symmetries of
this car. See photo attached.
The reflection along the yellow line is one symmetry, but we can surely assume
that there is no preference between the front and back of this car so we get
a reflection along the red line. Overall, the group of symmetries of this car
has four elements and its group structure is
Z/2Z + Z/2Z
This group is not cyclic and depending on the symetry we choose, we can get four
different answers.
Sorry, I know my presentation is too simple and is not at the level of complexity
of your question but this is the best I could do.
Cheers,
Reza
|
|
|
Author: | randyf | Posted: | Mar 22, 2020 04:12 | Subject: | Re: Inventory Change Request for Set 5512-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, 1977_mauro writes:
| Randy, it was not a mistake but I did not want to complicate the inventory change
- as the regular part was already established as an alternate one.
|
But you said *all* of your sets came with *all* white 3794a. If they *all* came
with *all* white 3794a and you didn't get any white 3794b, why would you
ask to add any white 3794b as alternates? It doesn't make sense. There is
no established white 3794a or 3794b in the set, just one undetermined entry that
should just be replaced with what you found. Right?
| But when we get now rid off of the undertermined entries, I would just simly
add my findings as regular ones and fully skip the alternate ones.
Mauro
In Inventories Requests, randyf writes:
| Thanks, Mauro!
So it was a mistake on your part to ask to add 3794b in white as an alternate?
And are we sure we need to keep 3794a in red in the Regular Items section?
Cheers,
Randy
In Inventories Requests, 1977_mauro writes:
| Hi Randy,
in ALL 3 boxes there were the SAME mix up of these parts:
ALL red ones came as 3794b.
ALL white ones came as 3794a.
It seems that this was the standard for these boxes as I have bought all 3 from
different sources.
Regards
Mauro
In Inventories Requests, randyf writes:
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 2 Part 3794b White Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 5)
* Change 2 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part White {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} {match ID 0 to 5}
Comments from Submitter:
From 3 sealed sets, the red part was 3794b, during the white part was 3794b. The undertermined version is not required here anymore.
|
I am sorry if I am still confused by your statements, but can I ask you to just
answer these questions with a 'yes' or 'no'?
Did you find any 3794a in red in any of the three sets you parted
out?
Did you find any 3794b in red in any of the three sets you parted
out?
Did you find any 3794a in white in any of the three sets you parted
out?
Did you find any 3794b in white in any of the three sets you parted
out?
Thanks,
Randy
|
|
|
|
|
|
Author: | StarBrick | Posted: | Mar 22, 2020 04:02 | Subject: | Re: Clips Ahoy, part three. | Viewed: | 72 times | Topic: | Catalog | |
|
| In Catalog, mfav writes:
Once more awesome pictures and studies of the difference between parts that we
all call the same.
Marvellous work again!!!
|
|
Author: | 1977_mauro | Posted: | Mar 22, 2020 03:50 | Subject: | Re: Inventory Change Request for Set 5512-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
|
| Randy, it was not a mistake but I did not want to complicate the inventory change
- as the regular part was already established as an alternate one.
But when we get now rid off of the undertermined entries, I would just simly
add my findings as regular ones and fully skip the alternate ones.
Mauro
In Inventories Requests, randyf writes:
| Thanks, Mauro!
So it was a mistake on your part to ask to add 3794b in white as an alternate?
And are we sure we need to keep 3794a in red in the Regular Items section?
Cheers,
Randy
In Inventories Requests, 1977_mauro writes:
| Hi Randy,
in ALL 3 boxes there were the SAME mix up of these parts:
ALL red ones came as 3794b.
ALL white ones came as 3794a.
It seems that this was the standard for these boxes as I have bought all 3 from
different sources.
Regards
Mauro
In Inventories Requests, randyf writes:
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 2 Part 3794b White Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 5)
* Change 2 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part White {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} {match ID 0 to 5}
Comments from Submitter:
From 3 sealed sets, the red part was 3794b, during the white part was 3794b. The undertermined version is not required here anymore.
|
I am sorry if I am still confused by your statements, but can I ask you to just
answer these questions with a 'yes' or 'no'?
Did you find any 3794a in red in any of the three sets you parted
out?
Did you find any 3794b in red in any of the three sets you parted
out?
Did you find any 3794a in white in any of the three sets you parted
out?
Did you find any 3794b in white in any of the three sets you parted
out?
Thanks,
Randy
|
|
|
|
|
Author: | randyf | Posted: | Mar 22, 2020 03:24 | Subject: | Re: Inventory Change Request for Set 5512-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
|
| Thanks, Mauro!
So it was a mistake on your part to ask to add 3794b in white as an alternate?
And are we sure we need to keep 3794a in red in the Regular Items section?
Cheers,
Randy
In Inventories Requests, 1977_mauro writes:
| Hi Randy,
in ALL 3 boxes there were the SAME mix up of these parts:
ALL red ones came as 3794b.
ALL white ones came as 3794a.
It seems that this was the standard for these boxes as I have bought all 3 from
different sources.
Regards
Mauro
In Inventories Requests, randyf writes:
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 2 Part 3794b White Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 5)
* Change 2 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part White {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} {match ID 0 to 5}
Comments from Submitter:
From 3 sealed sets, the red part was 3794b, during the white part was 3794b. The undertermined version is not required here anymore.
|
I am sorry if I am still confused by your statements, but can I ask you to just
answer these questions with a 'yes' or 'no'?
Did you find any 3794a in red in any of the three sets you parted
out?
Did you find any 3794b in red in any of the three sets you parted
out?
Did you find any 3794a in white in any of the three sets you parted
out?
Did you find any 3794b in white in any of the three sets you parted
out?
Thanks,
Randy
|
|
|
|
Author: | SezaR | Posted: | Mar 22, 2020 03:18 | Subject: | Re: Clips Ahoy, part three. | Viewed: | 92 times | Topic: | Catalog | |
|
| In Catalog, Captain_Q writes:
| In Catalog, Admin_Russell writes:
| In Catalog, popsicle writes:
| In Catalog, mfav writes:
A very nice site you’re constructing. The detail of information and quality is
amazing!
I’m curious though, why do all of the active links on your fup page, link
to Law’s site, Brick Owl?
|
That is a very good and important question.
|
I am curious now. Is this allowed? Because the links were not directly shared
of BO but overall this seems like a conflict on interest with the TOS? Yeah,
no?
|
It depends on the distance and it depends on how you define the distance. I have
two definitions at hand:
Definition one: the distance between two websites is the minimum number of clicks
required to go from one website to the other.
In this case, this distance would be three: first click on the link that he
provided. The second click would be on "fup", and the third would be on one of
his images.
Definition two: 1+ "the minimum number of websites required to be visited"
Based on this definition, the distance would be 2 because one only need to visit
mfav's website to get from here to the other website.
Bricklink follows the first definition. The rule that they follow on Bricklink
depends on the other website:
For Ebay, the distance cannot be more than 25018 otherwise the thread will be
cancelled.
For BO, the distance cannot be more than 888102 otherwise the thread will be
cancelled.
For Lego.com, the distance could me more than 99999999 for threads posted before
December 2019. Since December 2019, the distance is allowed, sorry, it is encouraged
to be one.
|
|
Author: | 1977_mauro | Posted: | Mar 22, 2020 03:10 | Subject: | Re: Inventory Change Request for Set 5512-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| Hi Randy,
in ALL 3 boxes there were the SAME mix up of these parts:
ALL red ones came as 3794b.
ALL white ones came as 3794a.
It seems that this was the standard for these boxes as I have bought all 3 from
different sources.
Regards
Mauro
In Inventories Requests, randyf writes:
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 2 Part 3794b White Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 5)
* Change 2 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part White {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} {match ID 0 to 5}
Comments from Submitter:
From 3 sealed sets, the red part was 3794b, during the white part was 3794b. The undertermined version is not required here anymore.
|
I am sorry if I am still confused by your statements, but can I ask you to just
answer these questions with a 'yes' or 'no'?
Did you find any 3794a in red in any of the three sets you parted
out?
Did you find any 3794b in red in any of the three sets you parted
out?
Did you find any 3794a in white in any of the three sets you parted
out?
Did you find any 3794b in white in any of the three sets you parted
out?
Thanks,
Randy
|
|
|
Author: | randyf | Posted: | Mar 22, 2020 03:04 | Subject: | Re: Inventory Change Request for Set 5512-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 2 Part 3794b White Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 5)
* Change 2 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part White {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} {match ID 0 to 5}
Comments from Submitter:
From 3 sealed sets, the red part was 3794b, during the white part was 3794b. The undertermined version is not required here anymore.
|
I am sorry if I am still confused by your statements, but can I ask you to just
answer these questions with a 'yes' or 'no'?
Did you find any 3794a in red in any of the three sets you parted
out?
Did you find any 3794b in red in any of the three sets you parted
out?
Did you find any 3794a in white in any of the three sets you parted
out?
Did you find any 3794b in white in any of the three sets you parted
out?
Thanks,
Randy
|
|
Author: | Captain_Q | Posted: | Mar 22, 2020 03:00 | Subject: | Re: Clips Ahoy, part three. | Viewed: | 66 times | Topic: | Catalog | |
|
| In Catalog, Heartbricker writes:
| In Catalog, mfav writes:
Wondering what type camera/filters/editing programs you're using?
Your closeup pictures come out amazingly detailed.
|
In Catalog, Leftoverbricks writes:
| Mfav (Mark) has been suspended from the forum so we will not know.
|
Hopefully not for long. But perhaps I can shed some insight as I have a background
as a photographer/videographer.
I can't say what camera, but for pictures like this a macro lens is required
to get close in shots with tiny objects like Lego. If Mark is using a DSLR of
some kind or comparable then shooting uncompressed photos will retain sharper
images.
I can't say what filters Mark used, but a polarizer filter can help greatly
with reducing reflective / semi-reflective surfaces like Lego.
And Mark is most likely using a light box of some sort or using white surfaces
of some kind to bounce the light for even lighting/softer shadowing.
Hopefully Mark will be back to elaborate but hopefully this information is helpful
in the meantime.
-Quinton
|
|
Author: | Leftoverbricks | Posted: | Mar 22, 2020 02:14 | Subject: | Re: Clips Ahoy, part three. | Viewed: | 77 times | Topic: | Catalog | |
|
| In Catalog, Heartbricker writes:
| In Catalog, mfav writes:
Wondering what type camera/filters/editing programs you're using?
Your closeup pictures come out amazingly detailed.
|
Mfav (Mark) has been suspended from the forum so we will not know.
|
|
Author: | randyf | Posted: | Mar 22, 2020 01:27 | Subject: | Re: Inventory Change Request for Set 8163-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, mj. writes:
| Please make changes to the following inventory:
* Delete 4 Part 58090 Black Tire 30.4 x 14 VR Solid
Comments from Submitter:
Set 8163 should include tires 30.4 x 14, but without the VR designation. The wheel (345837) does not work with the 30.4 x 14 VR tire (345841). The VR tire is slightly larger on the inside. I could not locate the correct tire without the VR designation on the Bricklink site. I took a picture if you want it for verification.
I bought one complete set (372824) and it was correct, but the extra tire I bought included the VR. That's how I discovered the problem.
MJ
|
This set has the correct tires in it. Although, the name of the tire is misleading
since the 58090 tire does not have the "VR" designation molded on it. I will
submit a change request to have the name of the tire updated.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Mar 22, 2020 00:04 | Subject: | Re: Inventory Change Request for Set 148-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, normann1974 writes:
| Could someone update the note on the inventory? It doesn't make sense any
more because there are no bricks with match ID 1.
|
The note has been removed.
Cheers,
Randy
|
Author: | randyf | Posted: | Mar 21, 2020 23:57 | Subject: | Re: Clips Ahoy, part three. | Viewed: | 90 times | Topic: | Catalog | |
|
| In Catalog, mfav writes:
I really appreciate the work you are doing to collectively identify, organize,
and call reference to all of these clips. I don't think BrickLink will ever
have a need to recognize so many variations, but your resource is without a doubt
a huge benefit to all AFOLs. Very nice work, Mark.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Mar 21, 2020 23:47 | Subject: | Re: Wheel plate stuck on car chassis piece | Viewed: | 37 times | Topic: | Catalog | |
|
| In Catalog, crazylegoman writes:
| randyf, the part is definitely made up of 3 separate parts (1 of the main chassis,
and 2 of the modified 2X2 plates.) Each of the 3 parts has a molded part number
that you can see on the underside.
|
What I meant to say was that the part comes as one complete unit in the sets
directly from LEGO and is counted as one part by LEGO. There is no need to assemble
it, and it is not meant to be disassembled. I was rushing through messages before,
so I didn't explain it well enough.
Cheers,
Randy
|
|
Author: | crazylegoman | Posted: | Mar 21, 2020 23:28 | Subject: | Re: Wheel plate stuck on car chassis piece | Viewed: | 34 times | Topic: | Catalog | |
|
| In Catalog, BricksThatStick writes:
Good find! It looks like bag #2 comes with the red chassis that already has
the red 2X2 plates with small pins attached.
Thanks,
David
|
Author: | Heartbricker | Posted: | Mar 21, 2020 23:13 | Subject: | Re: Clips Ahoy, part three. | Viewed: | 94 times | Topic: | Catalog | |
|
| In Catalog, mfav writes:
Wondering what type camera/filters/editing programs you're using?
Your closeup pictures come out amazingly detailed.
|
|
Author: | Captain_Q | Posted: | Mar 21, 2020 23:05 | Subject: | Re: Clips Ahoy, part three. | Viewed: | 102 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| In Catalog, popsicle writes:
| In Catalog, mfav writes:
A very nice site you’re constructing. The detail of information and quality is
amazing!
I’m curious though, why do all of the active links on your fup page, link
to Law’s site, Brick Owl?
|
That is a very good and important question.
|
I am curious now. Is this allowed? Because the links were not directly shared
of BO but overall this seems like a conflict on interest with the TOS? Yeah,
no?
|
|
Author: | axaday | Posted: | Mar 21, 2020 22:18 | Subject: | Re: Inventory Change Request for Set 8558-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 4 Part Red {6538 Technic, Axle Connector 2L (Ridged Undetermined Type) to 6538b Technic, Axle Connector 2L (Ridged with x Hole x Orientation)}
Comments from Submitter:
I'm pretty sure we're going to find only light gray in 6538a, but checking around.
|
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|