Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | A.Lukinov  | | Posted: | Jan 15, 2019 15:55 | | Subject: | Inventory Change Request for Set 9398-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 32271pb019R Black Technic, Liftarm 1 x 9 Bent (7 - 3) Thick with LEGO TECHNIC Logo Pattern Model Right Side (Sticker) - Set 9395
Comments from Submitter:
This part with the same sticker at the same position is in 9398 and 9395 inventories both
|
 |
| Author: | A.Lukinov | | Posted: | Jan 15, 2019 15:55 | | Subject: | Inventory Change Request for Set 9398-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 32271pb019L Black Technic, Liftarm 1 x 9 Bent (7 - 3) Thick with LEGO TECHNIC Logo Pattern Model Left Side (Sticker) - Set 9395 (Counterpart)
Comments from Submitter:
This part with the same sticker at the same position is in 9398 and 9395 inventories both
|
|
| Author: | jennnifer | | Posted: | Jan 15, 2019 00:38 | | Subject: | Re: Cancel change requests. | | Viewed: | 33 times | | Topic: | Catalog Requests | |
|
| In Catalog Requests, mcmit writes:
| | Please ignore /cancel my change requests to 10865 and 10895
I entered the wrong set number the first time and I made a error on the width
of 10895 details, regardless of that the details already submitted for 10895
correspond closely with the ones I entered.
|
You can cancel Pending Requests from your My Activity page:
https://www.bricklink.com/myActivity.asp?utm_content=subnav
Jen
|
|
| Author: | mcmit | | Posted: | Jan 14, 2019 23:01 | | Subject: | Cancel change requests. | | Viewed: | 68 times | | Topic: | Catalog | | Status: | Open | |
|
| Please ignore /cancel my change requests to 10865 and 10895
I entered the wrong set number the first time and I made a error on the width
of 10895 details, regardless of that the details already submitted for 10895
correspond closely with the ones I entered.
|
| Author: | axaday | | Posted: | Jan 14, 2019 17:29 | | Subject: | Re: Complete set of Unikitty CMFs? | | Viewed: | 45 times | | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
Yay!
|
| Author: | jennnifer | | Posted: | Jan 14, 2019 16:23 | | Subject: | Re: Complete set of Unikitty CMFs? | | Viewed: | 39 times | | Topic: | Catalog | |
|
| In Catalog, leopard37 writes:
I am also very happy to see a listing like this added to the catalog! I know
it is against custom but very useful for buyers and sellers.
Jen
|
|
| Author: | Shahennian | | Posted: | Jan 14, 2019 15:36 | | Subject: | Re: Black Lightning | | Viewed: | 44 times | | Topic: | Catalog Requests | |
|
| In Catalog Requests, axaday writes:
| | In Catalog Requests, FauconRoyal writes:
| | Hello,
I recently purchased the "SDCC2018-2: Black Lightning" set. I then went on Brickset
to add it to my collection, but no minifig is listed for the set. I proceeded
to send them a message so they could fix this error, but they told me they rely
on Bricklink for their minifig inventory.
That's why I'm posting a message here. I noticed that there are two entries
for Black Lightning on Bricklink : comcon056-1 for the full set and sh521 for
the minifig. But these two entries are not linked one to another.
Could someone in the admin team link them?
Thanks a lot!
|
Is the minifig all there is in the set? It doesn't look like there are any
accessories.
If it is just the minifig, go to https://www.bricklink.com/catalogInvAdd.asp?viewType=S
Under manual add, type comcon056 and then 1 in number of entries. Then hit "Go
to step 2".
On the next page, change the P to M under item type, type sh521 under item number,
0 under color ID, and 1 under quantity. Further down, set Source? to Sealed
Set Contents and hit Verify Items. On the next page click Add Inventory.
It is pretty easy, but I can't do it for you, because the person who does
it is attesting that they have the item and can verify its contents. So you
can do it.
|
Thanks very much, just did it!
|
|
| Author: | axaday | | Posted: | Jan 14, 2019 15:10 | | Subject: | Re: Black Lightning | | Viewed: | 35 times | | Topic: | Catalog Requests | |
|
| In Catalog Requests, FauconRoyal writes:
| | Hello,
I recently purchased the "SDCC2018-2: Black Lightning" set. I then went on Brickset
to add it to my collection, but no minifig is listed for the set. I proceeded
to send them a message so they could fix this error, but they told me they rely
on Bricklink for their minifig inventory.
That's why I'm posting a message here. I noticed that there are two entries
for Black Lightning on Bricklink : comcon056-1 for the full set and sh521 for
the minifig. But these two entries are not linked one to another.
Could someone in the admin team link them?
Thanks a lot!
|
Is the minifig all there is in the set? It doesn't look like there are any
accessories.
If it is just the minifig, go to https://www.bricklink.com/catalogInvAdd.asp?viewType=S
Under manual add, type comcon056 and then 1 in number of entries. Then hit "Go
to step 2".
On the next page, change the P to M under item type, type sh521 under item number,
0 under color ID, and 1 under quantity. Further down, set Source? to Sealed
Set Contents and hit Verify Items. On the next page click Add Inventory.
It is pretty easy, but I can't do it for you, because the person who does
it is attesting that they have the item and can verify its contents. So you
can do it.
|
|
| Author: | Hygrotus | | Posted: | Jan 14, 2019 14:22 | | Subject: | Re: Black Lightning | | Viewed: | 45 times | | Topic: | Catalog Requests | |
|
| In Catalog Requests, FauconRoyal writes:
| | In Catalog Requests, FauconRoyal writes:
| | Hello,
I recently purchased the "SDCC2018-2: Black Lightning" set. I then went on Brickset
to add it to my collection, but no minifig is listed for the set. I proceeded
to send them a message so they could fix this error, but they told me they rely
on Bricklink for their minifig inventory.
That's why I'm posting a message here. I noticed that there are two entries
for Black Lightning on Bricklink : for the full set and for
the minifig. But these two entries are not linked one to another.
Could someone in the admin team link them?
Thanks a lot!
|
Just noticed it's the same for Sheriff Deadpool with for the
set and for the minifig
|
Somebody have to submit inventories for them.
Inventories should be done by somebody who has those sets in hand. Because for
sets which were added recently to the catalog we only accept source of inventories
for sets form sealed set contents.
https://www.bricklink.com/help.asp?helpID=199
"Source - You should have a physical copy of the set you are inventorying
to properly identify the parts and colors. When this is not possible for old
or rare sets, then it is acceptable to use the instructions, set picture, or
parts list (sometimes printed on the box or in the instructions) to complete
the inventory. Inventories will only be accepted from sealed set contents
for the first year after the set was added to the catalog. If no inventory was
created during the first year, then any source may be used to create an inventory."
More information also here
https://www.bricklink.com/message.asp?ID=1105076
As I checked those sets are not yet one year old since addition to the catalog
to have inventories from different source than sealed set content unfortunately.
|
|
| Author: | Shahennian | | Posted: | Jan 14, 2019 14:10 | | Subject: | Re: Black Lightning | | Viewed: | 35 times | | Topic: | Catalog Requests | |
|
| In Catalog Requests, FauconRoyal writes:
| | Hello,
I recently purchased the "SDCC2018-2: Black Lightning" set. I then went on Brickset
to add it to my collection, but no minifig is listed for the set. I proceeded
to send them a message so they could fix this error, but they told me they rely
on Bricklink for their minifig inventory.
That's why I'm posting a message here. I noticed that there are two entries
for Black Lightning on Bricklink : comcon056-1 for the full set and sh521 for
the minifig. But these two entries are not linked one to another.
Could someone in the admin team link them?
Thanks a lot!
|
Just noticed it's the same for Sheriff Deadpool with comcon055-1 for the
set and sh520 for the minifig
|
|
| Author: | chetzler | | Posted: | Jan 14, 2019 13:14 | | Subject: | Re: Complete set of Unikitty CMFs? | | Viewed: | 38 times | | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| | In Catalog, alphadavy writes:
| | In Catalog, yorbrick writes:
| | | | | | How would you recommend selling a complete set of CMFs?
|
Personally, I would do what these other sellers have done and list the whole
set under the random entry. As long as you describe things clearly in your notes,
buyers will understand that they are paying for a whole set. This is one of those
areas where the average prices must be deduced from scanning listings or sold
listings instead of the calculated averages.
|
It is a shame that the site cannot do something and step in and help sellers
and buyers here, by realising what they need. Some people want to sell and buy
complete series. I thought the primary goal of bricklink was to enable sales
of LEGO, so adding a "complete series" for each CMF or similar series would work
well for those people. Does it really matter that they were never sold that way
by LEGO? If need be, this information could always be added as a note to a complete
series entry.
|
+1
It's about time!
|
Here you go. Let's try it out. 
Let me know if you think the random one needs a big question mark placed over
it. If people like this entry and use it, we'll go ahead and add the others.
|
Very good! I have one set listed under this new entry and will retain another
set as a superlot. The prices are the same--we'll see which one moves
first.
|
|
| Author: | yorbrick | | Posted: | Jan 14, 2019 13:13 | | Subject: | Re: Complete set of Unikitty CMFs? | | Viewed: | 29 times | | Topic: | Catalog | |
|
| In Catalog, LordSkylark writes:
| | In Catalog, Admin_Russell writes:
| | In Catalog, alphadavy writes:
| | In Catalog, yorbrick writes:
| | | | | | How would you recommend selling a complete set of CMFs?
|
Personally, I would do what these other sellers have done and list the whole
set under the random entry. As long as you describe things clearly in your notes,
buyers will understand that they are paying for a whole set. This is one of those
areas where the average prices must be deduced from scanning listings or sold
listings instead of the calculated averages.
|
It is a shame that the site cannot do something and step in and help sellers
and buyers here, by realising what they need. Some people want to sell and buy
complete series. I thought the primary goal of bricklink was to enable sales
of LEGO, so adding a "complete series" for each CMF or similar series would work
well for those people. Does it really matter that they were never sold that way
by LEGO? If need be, this information could always be added as a note to a complete
series entry.
|
+1
It's about time!
|
Here you go. Let's try it out.
Let me know if you think the random one needs a big question mark placed over
it. If people like this entry and use it, we'll go ahead and add the others.
|
Isn't there a better way to reword these types of entries?
"Complete Random Set of 1 Minifigure"
This wording still seems confusing. Even if "Complete Set of 1 Random Minifigure"
it would make more sense. But I would think using "complete" makes it confusing
for the most part.
|
Personally, I would go for something along the lines of:
41775-1 Minifigure, Unikitty!, Series 1 (1 Random Set = 1 Random Character)
and
41775-2 Minifigure, Unikitty!, Series 1 (1 Complete Series of 12 Sets = 12 Characters)
However, I think the images chosen for these are fine and show what is needed.
|
|
| Author: | yorbrick | | Posted: | Jan 14, 2019 13:06 | | Subject: | Re: Complete set of Unikitty CMFs? | | Viewed: | 45 times | | Topic: | Catalog | |
|
| | | Here you go. Let's try it out.
Let me know if you think the random one needs a big question mark placed over
it. If people like this entry and use it, we'll go ahead and add the others.
|
Hi Russell,
Thanks for responding and doing something about it so quickly!
However, it might be better tested on a new series and possibly a more traditional
/ popular one too, so could it also be done for TLM2 series once it comes out.
|
|
| Author: | LordSkylark | | Posted: | Jan 14, 2019 13:05 | | Subject: | Re: Complete set of Unikitty CMFs? | | Viewed: | 31 times | | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| | In Catalog, alphadavy writes:
| | In Catalog, yorbrick writes:
| | | | | | How would you recommend selling a complete set of CMFs?
|
Personally, I would do what these other sellers have done and list the whole
set under the random entry. As long as you describe things clearly in your notes,
buyers will understand that they are paying for a whole set. This is one of those
areas where the average prices must be deduced from scanning listings or sold
listings instead of the calculated averages.
|
It is a shame that the site cannot do something and step in and help sellers
and buyers here, by realising what they need. Some people want to sell and buy
complete series. I thought the primary goal of bricklink was to enable sales
of LEGO, so adding a "complete series" for each CMF or similar series would work
well for those people. Does it really matter that they were never sold that way
by LEGO? If need be, this information could always be added as a note to a complete
series entry.
|
+1
It's about time!
|
Here you go. Let's try it out.
Let me know if you think the random one needs a big question mark placed over
it. If people like this entry and use it, we'll go ahead and add the others.
|
Isn't there a better way to reword these types of entries?
"Complete Random Set of 1 Minifigure"
This wording still seems confusing. Even if "Complete Set of 1 Random Minifigure"
it would make more sense. But I would think using "complete" makes it confusing
for the most part.
|
|
| Author: | joker33 | | Posted: | Jan 14, 2019 13:02 | | Subject: | Re: Inventory Change Request for Set 8837-1 | | Viewed: | 27 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, joker33 writes:
| | Please make changes to the following inventory:
* Add 1 Part 5102c02 Trans-Clear Hose, Pneumatic 4mm D. 2L / 1.6cm (Alternate) (match ID 1)
* Add 2 Part 5102c04 Trans-Clear Hose, Pneumatic 4mm D. 4L / 3.2cm (Alternate) (match ID 2)
* Add 1 Part 5102c06 Trans-Clear Hose, Pneumatic 4mm D. 6L / 4.8cm (Alternate) (match ID 3)
* Add 1 Part 5102c08 Trans-Clear Hose, Pneumatic 4mm D. 8L / 6.4cm (Alternate) (match ID 4)
|
There is an alternate version of tubing. Instead of light grey tubing, there
is a version with trans clear tubing. As proof, I found pictures in the store
of WE Bricks. He sells two new and sealed 8837. One of the comes with grey tubing,
the other with alternate trans clear tubing.
|
|
|
| Author: | leopard37 | | Posted: | Jan 14, 2019 12:59 | | Subject: | Re: Complete set of Unikitty CMFs? | | Viewed: | 36 times | | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| | In Catalog, alphadavy writes:
| | In Catalog, yorbrick writes:
| | | | | | How would you recommend selling a complete set of CMFs?
|
Personally, I would do what these other sellers have done and list the whole
set under the random entry. As long as you describe things clearly in your notes,
buyers will understand that they are paying for a whole set. This is one of those
areas where the average prices must be deduced from scanning listings or sold
listings instead of the calculated averages.
|
It is a shame that the site cannot do something and step in and help sellers
and buyers here, by realising what they need. Some people want to sell and buy
complete series. I thought the primary goal of bricklink was to enable sales
of LEGO, so adding a "complete series" for each CMF or similar series would work
well for those people. Does it really matter that they were never sold that way
by LEGO? If need be, this information could always be added as a note to a complete
series entry.
|
+1
It's about time!
|
Here you go. Let's try it out.
Let me know if you think the random one needs a big question mark placed over
it. If people like this entry and use it, we'll go ahead and add the others.
|
Hooray!!!!
Please add the Series 17 and DFB!
I have both for sale currently!
Tyson.
|
|
| Author: | joker33 | | Posted: | Jan 14, 2019 12:55 | | Subject: | Inventory Change Request for Set 8837-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 5102c02 Trans-Clear Hose, Pneumatic 4mm D. 2L / 1.6cm (Alternate) (match ID 1)
* Add 2 Part 5102c04 Trans-Clear Hose, Pneumatic 4mm D. 4L / 3.2cm (Alternate) (match ID 2)
* Add 1 Part 5102c06 Trans-Clear Hose, Pneumatic 4mm D. 6L / 4.8cm (Alternate) (match ID 3)
* Add 1 Part 5102c08 Trans-Clear Hose, Pneumatic 4mm D. 8L / 6.4cm (Alternate) (match ID 4)
|
|
| Author: | Admin_Russell | | Posted: | Jan 14, 2019 12:51 | | Subject: | Re: Complete set of Unikitty CMFs? | | Viewed: | 77 times | | Topic: | Catalog | |
|
|
BrickLink
ID CardAdmin_Russell
|
Location:  USA, California |
| Member Since |
Contact |
Type |
Status |
| May 9, 2017 |
 |
Admin |
|
|
| BrickLink Administrator |
|
| In Catalog, alphadavy writes:
| | In Catalog, yorbrick writes:
| | | | | | How would you recommend selling a complete set of CMFs?
|
Personally, I would do what these other sellers have done and list the whole
set under the random entry. As long as you describe things clearly in your notes,
buyers will understand that they are paying for a whole set. This is one of those
areas where the average prices must be deduced from scanning listings or sold
listings instead of the calculated averages.
|
It is a shame that the site cannot do something and step in and help sellers
and buyers here, by realising what they need. Some people want to sell and buy
complete series. I thought the primary goal of bricklink was to enable sales
of LEGO, so adding a "complete series" for each CMF or similar series would work
well for those people. Does it really matter that they were never sold that way
by LEGO? If need be, this information could always be added as a note to a complete
series entry.
|
+1
It's about time!
|
Here you go. Let's try it out.
Let me know if you think the random one needs a big question mark placed over
it. If people like this entry and use it, we'll go ahead and add the others.
|
|
| Author: | joker33 | | Posted: | Jan 14, 2019 12:47 | | Subject: | Re: Inventory Change Request for Set 8421-1 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, joker33 writes:
| | Please make changes to the following inventory:
* Add 1 Part x77ac500 Black String, Cord Thin 500cm (Alternate) (match ID 1)
|
Hi! I bought an 8421 recently, and in bag number 8 there was the cord "4276327"
(=x77ac500) (see pictures). That's different from the database here, which
states x77cc250.
|
|
| Author: | joker33 | | Posted: | Jan 14, 2019 12:34 | | Subject: | Inventory Change Request for Set 8421-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part x77ac500 Black String, Cord Thin 500cm (Alternate) (match ID 1)
|
|
| Author: | peegeelee | | Posted: | Jan 14, 2019 12:27 | | Subject: | Re: Tool to determine sets based on inventory | | Viewed: | 29 times | | Topic: | Inventories | |
|
| In Inventories, brikomania writes:
| | In Inventories, peegeelee writes:
| | Fellow Bricklinkers,
I am looking for the easiest way to determine if a set can be built based on
a defined inventory, or, even better, a tool which can automatically determine
what sets can be built from a defined inventory.
Do you guys know of any such toot(s)/ways to do so or I am asking for the moon?
Thanks in advance!
Cheers
Pierre
|
I believe rebrickable is just for that!
|
Exactly what I needed, thanks for pointing me in the right direction brikomania!
|
|
| Author: | peegeelee | | Posted: | Jan 14, 2019 12:21 | | Subject: | Re: Tool to determine sets based on inventory | | Viewed: | 27 times | | Topic: | Inventories | |
|
| In Inventories, brikomania writes:
| | In Inventories, peegeelee writes:
| | Fellow Bricklinkers,
I am looking for the easiest way to determine if a set can be built based on
a defined inventory, or, even better, a tool which can automatically determine
what sets can be built from a defined inventory.
Do you guys know of any such toot(s)/ways to do so or I am asking for the moon?
Thanks in advance!
Cheers
Pierre
|
I believe rebrickable is just for that!
|
Thanks, let me look into that!
|
|
| Author: | brikomania | | Posted: | Jan 14, 2019 12:14 | | Subject: | Re: Tool to determine sets based on inventory | | Viewed: | 29 times | | Topic: | Inventories | |
|
| In Inventories, peegeelee writes:
| | Fellow Bricklinkers,
I am looking for the easiest way to determine if a set can be built based on
a defined inventory, or, even better, a tool which can automatically determine
what sets can be built from a defined inventory.
Do you guys know of any such toot(s)/ways to do so or I am asking for the moon?
Thanks in advance!
Cheers
Pierre
|
I believe rebrickable is just for that!
|
|
| Author: | Shahennian | | Posted: | Jan 14, 2019 12:07 | | Subject: | Black Lightning | | Viewed: | 129 times | | Topic: | Inventories | | Status: | Open | |
|
| Hello,
I recently purchased the "SDCC2018-2: Black Lightning" set. I then went on Brickset
to add it to my collection, but no minifig is listed for the set. I proceeded
to send them a message so they could fix this error, but they told me they rely
on Bricklink for their minifig inventory.
That's why I'm posting a message here. I noticed that there are two entries
for Black Lightning on Bricklink : comcon056-1 for the full set and sh521 for
the minifig. But these two entries are not linked one to another.
Could someone in the admin team link them?
Thanks a lot!
|
|
| Author: | peegeelee | | Posted: | Jan 14, 2019 11:57 | | Subject: | Tool to determine sets based on inventory | | Viewed: | 64 times | | Topic: | Inventories | | Status: | Open | |
|
| Fellow Bricklinkers,
I am looking for the easiest way to determine if a set can be built based on
a defined inventory, or, even better, a tool which can automatically determine
what sets can be built from a defined inventory.
Do you guys know of any such toot(s)/ways to do so or I am asking for the moon?
Thanks in advance!
Cheers
Pierre
|
|
| Author: | axaday | | Posted: | Jan 14, 2019 09:17 | | Subject: | Re: Correct handling of 18904c01pb01 | | Viewed: | 39 times | | Topic: | Catalog | |
|
| In Catalog, normann1974 writes:
| | In Catalog, axaday writes:
| | In Catalog, normann1974 writes:
| | In Catalog, axaday writes:
| | In Catalog, normann1974 writes:
| | Please take a look at:
https://www.bricklink.com/catalogItemIn.asp?P=18904c01pb01&in=S
The crocodile consists of 4 parts and doesn't come assembled (at least not
in set 60157 which I just parted out). So isn't the correct way to include
the four parts in the inventories and the complete assembly as a counterpart
for all sets in the above list?
/Jan
|
You are correct. The pieces that come in the set should be included in the inventory
with the complete animal in the counterparts.
|
I'd love to fix this, but your response contradicts what two other admins
say in this thread. I'll let you all agree before I do anything.
/Jan
|
My response doesn't matter if the admins contradict it. But you will see
that Russell didn't exactly contradict me. He said they belong there, but
they just can't go there for the moment.
|
But just because the part-out system doesn't work like some people want to,
I don't see that as a reason not to make the inventories consistent. That
work can already be done now, and I have even offered to do it.
/Jan
|
For what it's worth, I agree with you and was totally unaware of the part
out thing being an issue. But I'm not the one you need to convince.
|
|
| Author: | Jetflap | | Posted: | Jan 14, 2019 08:25 | | Subject: | Re: Inventory Change Request for Set 6440-1 | | Viewed: | 29 times | | Topic: | Inventories Requests | |
|
| This is also correct, 2 taps for to extinguishers, thank you. I have added additional
photos showing both, where they are built in the instructions and where they
are placed in the model.
In Inventories Requests, elias3 writes:
| | In Inventories Requests, Jetflap writes:
| | In Inventories Requests, Jetflap writes:
| | Please make changes to the following inventory:
* Change {3 to 4} Part Yellow 3062b Brick, Round 1 x 1 Open Stud
Comments from Submitter:
4 are clearly required for the set, 2 are used in the fire extinguishers and 2 for the water cannons. See photo from back of box the shows 2 fire extinguishers and two alternate builds that require 4 of this part.
|
|
Hi
and add also 1x yellow tap
Peeron has also 4x 3062b and 2x 4599a
http://www.peeron.com/inv/sets/6440-1
my count: the MF (driver) use the tap/round brick inside and airtanks inside
the other minfig use the other tap/round brick with the axe (other axe still
on the truck)
Stefaan
|
|
|
|
| Author: | normann1974 | | Posted: | Jan 14, 2019 06:32 | | Subject: | Re: Correct handling of 18904c01pb01 | | Viewed: | 44 times | | Topic: | Catalog | |
|
| In Catalog, axaday writes:
| | In Catalog, normann1974 writes:
| | In Catalog, axaday writes:
| | In Catalog, normann1974 writes:
| | Please take a look at:
https://www.bricklink.com/catalogItemIn.asp?P=18904c01pb01&in=S
The crocodile consists of 4 parts and doesn't come assembled (at least not
in set 60157 which I just parted out). So isn't the correct way to include
the four parts in the inventories and the complete assembly as a counterpart
for all sets in the above list?
/Jan
|
You are correct. The pieces that come in the set should be included in the inventory
with the complete animal in the counterparts.
|
I'd love to fix this, but your response contradicts what two other admins
say in this thread. I'll let you all agree before I do anything.
/Jan
|
My response doesn't matter if the admins contradict it. But you will see
that Russell didn't exactly contradict me. He said they belong there, but
they just can't go there for the moment.
|
But just because the part-out system doesn't work like some people want to,
I don't see that as a reason not to make the inventories consistent. That
work can already be done now, and I have even offered to do it.
/Jan
|
|
| Author: | bb363828 | | Posted: | Jan 14, 2019 05:46 | | Subject: | Re: Complete set of Unikitty CMFs? | | Viewed: | 37 times | | Topic: | Catalog | |
|
| In Catalog, yorbrick writes:
| | | | | | How would you recommend selling a complete set of CMFs?
|
Personally, I would do what these other sellers have done and list the whole
set under the random entry. As long as you describe things clearly in your notes,
buyers will understand that they are paying for a whole set. This is one of those
areas where the average prices must be deduced from scanning listings or sold
listings instead of the calculated averages.
|
It is a shame that the site cannot do something and step in and help sellers
and buyers here, by realising what they need. Some people want to sell and buy
complete series. I thought the primary goal of bricklink was to enable sales
of LEGO, so adding a "complete series" for each CMF or similar series would work
well for those people. Does it really matter that they were never sold that way
by LEGO? If need be, this information could always be added as a note to a complete
series entry.
|
+1
It's about time!
|
|
| Author: | elias3 | | Posted: | Jan 14, 2019 04:28 | | Subject: | Re: Inventory Change Request for Set 6440-1 | | Viewed: | 25 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Jetflap writes:
| | In Inventories Requests, Jetflap writes:
| | Please make changes to the following inventory:
* Change {3 to 4} Part Yellow 3062b Brick, Round 1 x 1 Open Stud
Comments from Submitter:
4 are clearly required for the set, 2 are used in the fire extinguishers and 2 for the water cannons. See photo from back of box the shows 2 fire extinguishers and two alternate builds that require 4 of this part.
|
|
Hi
and add also 1x yellow tap
Peeron has also 4x 3062b and 2x 4599a
http://www.peeron.com/inv/sets/6440-1
my count: the MF (driver) use the tap/round brick inside and airtanks inside
the other minfig use the other tap/round brick with the axe (other axe still
on the truck)
Stefaan
|
|
| Author: | yorbrick | | Posted: | Jan 14, 2019 04:15 | | Subject: | Re: Complete set of Unikitty CMFs? | | Viewed: | 42 times | | Topic: | Catalog | |
|
| | | | | How would you recommend selling a complete set of CMFs?
|
Personally, I would do what these other sellers have done and list the whole
set under the random entry. As long as you describe things clearly in your notes,
buyers will understand that they are paying for a whole set. This is one of those
areas where the average prices must be deduced from scanning listings or sold
listings instead of the calculated averages.
|
It is a shame that the site cannot do something and step in and help sellers
and buyers here, by realising what they need. Some people want to sell and buy
complete series. I thought the primary goal of bricklink was to enable sales
of LEGO, so adding a "complete series" for each CMF or similar series would work
well for those people. Does it really matter that they were never sold that way
by LEGO? If need be, this information could always be added as a note to a complete
series entry.
|
|
| Author: | Admin_Russell | | Posted: | Jan 13, 2019 22:22 | | Subject: | Re: Complete set of Unikitty CMFs? | | Viewed: | 76 times | | Topic: | Catalog | |
|
|
BrickLink
ID CardAdmin_Russell
|
| Location: USA, California |
| Member Since |
Contact |
Type |
Status |
| May 9, 2017 |
|
Admin |
|
|
| BrickLink Administrator |
|
| In Catalog, chetzler writes:
| | In Catalog, Admin_Russell writes:
| | In Catalog, chetzler writes:
| |
Is this supposed to be the entry for the complete set of 12 unique Unikitty collectible
minifigs? This whole entry is very confusing. The name says "complete random
set" and also "1 minifigure". The inventory shows 12 unique figs. Which is
it: a random set of 12? One random figure? A complete set of all the figs?
The price guide doesn't help much: the average prices seem too low for a
set of 12 and too high for a single fig. Judging by the individual prices it
appears that some sellers are treating this entry as a single random fig and
others are treating it as a a set of 12.
|
This is a known problem. This entry is *supposed* to be for ONE complete minifigure
(randomly chosen from the available 12), but because we do not have an entry
type for the complete set of 12 minifigures (yet), some sellers use this entry
type for that purpose as well.
|
Can we get a note on this entry that explicitly states this? As I noted above
the name is misleading as is the image showing all 12 figures.
|
I've added the note to this entry and will add similar notes to other entries
later. One of the other things I'm planning on doing is coming up with an
image that more clearly shows the random nature of the entry, e.g. an image of
the foil pack with a large question mark over it. If someone wants to give this
a shot, we will try a different image and see if that improves things.
| | | | The drawback of creating another entry type is that we already have multiple
ways these are sold, and we are concerned that it might add to the confusion:
|
It certainly wouldn't be more confusing than this entry as it currently stands.
| |
| | Am I better off creating a super lot if I want to sell a complete set of 12?
|
The site officially discourages sellers from using superlots for any purposes.
|
It does? Why? This is the first I have heard this. Is this stated somewhere?
|
| | I understand that some people abuse the superlot function by listing one item
for $0.01 and the others at an outrageous price. I have never done this and
I have sold several superlots at fair, discounted prices. If BrickLink doesn't
like super lots it should disable that feature.
|
Apparently there was a serious problem with people abusing the feature in connection
with Easy Buy, so superlots are now hidden unless buyers opt to see them. Superlots
have never been a favorite thing for a long time, probably because they are so
awkward to work with. But the site doesn't want to just cut things from people's
stores, either, so the feature has been left there for buyers and sellers that
want it.
| | How would you recommend selling a complete set of CMFs?
|
Personally, I would do what these other sellers have done and list the whole
set under the random entry. As long as you describe things clearly in your notes,
buyers will understand that they are paying for a whole set. This is one of those
areas where the average prices must be deduced from scanning listings or sold
listings instead of the calculated averages.
|
|
| Author: | Jetflap | | Posted: | Jan 13, 2019 20:59 | | Subject: | Re: Inventory Change Request for Set 6440-1 | | Viewed: | 33 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Jetflap writes:
| | Please make changes to the following inventory:
* Change {3 to 4} Part Yellow 3062b Brick, Round 1 x 1 Open Stud
Comments from Submitter:
4 are clearly required for the set, 2 are used in the fire extinguishers and 2 for the water cannons. See photo from back of box the shows 2 fire extinguishers and two alternate builds that require 4 of this part.
|
|
|
|
| Author: | Jetflap | | Posted: | Jan 13, 2019 20:58 | | Subject: | Inventory Change Request for Set 6440-1 | | Viewed: | 38 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {3 to 4} Part Yellow 3062b Brick, Round 1 x 1 Open Stud
Comments from Submitter:
4 are clearly required for the set, 2 are used in the fire extinguishers and 2 for the water cannons. See photo from back of box the shows 2 fire extinguishers and two alternate builds that require 4 of this part.
|
|
| Author: | chetzler | | Posted: | Jan 13, 2019 17:48 | | Subject: | Re: Complete set of Unikitty CMFs? | | Viewed: | 56 times | | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| | In Catalog, chetzler writes:
| |
Is this supposed to be the entry for the complete set of 12 unique Unikitty collectible
minifigs? This whole entry is very confusing. The name says "complete random
set" and also "1 minifigure". The inventory shows 12 unique figs. Which is
it: a random set of 12? One random figure? A complete set of all the figs?
The price guide doesn't help much: the average prices seem too low for a
set of 12 and too high for a single fig. Judging by the individual prices it
appears that some sellers are treating this entry as a single random fig and
others are treating it as a a set of 12.
|
This is a known problem. This entry is *supposed* to be for ONE complete minifigure
(randomly chosen from the available 12), but because we do not have an entry
type for the complete set of 12 minifigures (yet), some sellers use this entry
type for that purpose as well.
|
Can we get a note on this entry that explicitly states this? As I noted above
the name is misleading as is the image showing all 12 figures.
| |
The drawback of creating another entry type is that we already have multiple
ways these are sold, and we are concerned that it might add to the confusion:
|
It certainly wouldn't be more confusing than this entry as it currently stands.
| |
| | Am I better off creating a super lot if I want to sell a complete set of 12?
|
The site officially discourages sellers from using superlots for any purposes.
|
It does? Why? This is the first I have heard this. Is this stated somewhere?
How would you recommend selling a complete set of CMFs?
I understand that some people abuse the superlot function by listing one item
for $0.01 and the others at an outrageous price. I have never done this and
I have sold several superlots at fair, discounted prices. If BrickLink doesn't
like super lots it should disable that feature.
|
|
| Author: | chetzler | | Posted: | Jan 13, 2019 17:39 | | Subject: | Re: Complete set of Unikitty CMFs? | | Viewed: | 44 times | | Topic: | Catalog | |
|
| In Catalog, randyf writes:
| | In Catalog, chetzler writes:
| |
Is this supposed to be the entry for the complete set of 12 unique Unikitty collectible
minifigs? This whole entry is very confusing. The name says "complete random
set" and also "1 minifigure". The inventory shows 12 unique figs. Which is
it: a random set of 12? One random figure? A complete set of all the figs?
|
The entry above is for one random foil pack containing one random character,
thus the terms "Complete Random Set of 1 Minifigure". In the inventory, this
is represented by the "Or:" relationship and the Match ID of 1. That relationship
means you can get the first minifigure in the inventory *or* the second minifigure
in the inventory *or* the third minifigure in the inventory, etc., but not all
at once.
|
OK, thanks. I can see now how the match makes sense from a technical standpoint
(because I understand how the match ID works) but this is probably confusing
to many buyers, especially new ones. The name is still misleading: both "complete"
and "set of" would lead people to believe they are getting something other than
one random figure.
| |
There are no official catalog entries for full sets of collectible minifigures.
|
This would be a very useful entry
|
|
|
| Author: | randyf | | Posted: | Jan 13, 2019 17:05 | | Subject: | Re: Complete set of Unikitty CMFs? | | Viewed: | 35 times | | Topic: | Catalog | |
|
| In Catalog, chetzler writes:
| |
Is this supposed to be the entry for the complete set of 12 unique Unikitty collectible
minifigs? This whole entry is very confusing. The name says "complete random
set" and also "1 minifigure". The inventory shows 12 unique figs. Which is
it: a random set of 12? One random figure? A complete set of all the figs?
|
The entry above is for one random foil pack containing one random character,
thus the terms "Complete Random Set of 1 Minifigure". In the inventory, this
is represented by the "Or:" relationship and the Match ID of 1. That relationship
means you can get the first minifigure in the inventory *or* the second minifigure
in the inventory *or* the third minifigure in the inventory, etc., but not all
at once.
There are no official catalog entries for full sets of collectible minifigures.
Cheers,
Randy
|
|
| Author: | chetzler | | Posted: | Jan 13, 2019 16:54 | | Subject: | Complete set of Unikitty CMFs? | | Viewed: | 109 times | | Topic: | Catalog | | Status: | Open | |
|
|
Is this supposed to be the entry for the complete set of 12 unique Unikitty collectible
minifigs? This whole entry is very confusing. The name says "complete random
set" and also "1 minifigure". The inventory shows 12 unique figs. Which is
it: a random set of 12? One random figure? A complete set of all the figs?
The price guide doesn't help much: the average prices seem too low for a
set of 12 and too high for a single fig. Judging by the individual prices it
appears that some sellers are treating this entry as a single random fig and
others are treating it as a a set of 12.
Am I better off creating a super lot if I want to sell a complete set of 12?
|
|
|
| Author: | axaday | | Posted: | Jan 13, 2019 16:31 | | Subject: | Re: Correct handling of 18904c01pb01 | | Viewed: | 29 times | | Topic: | Catalog | |
|
| In Catalog, normann1974 writes:
| | In Catalog, axaday writes:
| | In Catalog, normann1974 writes:
| | Please take a look at:
https://www.bricklink.com/catalogItemIn.asp?P=18904c01pb01&in=S
The crocodile consists of 4 parts and doesn't come assembled (at least not
in set 60157 which I just parted out). So isn't the correct way to include
the four parts in the inventories and the complete assembly as a counterpart
for all sets in the above list?
/Jan
|
You are correct. The pieces that come in the set should be included in the inventory
with the complete animal in the counterparts.
|
I'd love to fix this, but your response contradicts what two other admins
say in this thread. I'll let you all agree before I do anything.
/Jan
|
My response doesn't matter if the admins contradict it. But you will see
that Russell didn't exactly contradict me. He said they belong there, but
they just can't go there for the moment.
|
|
| Author: | FreeStorm | | Posted: | Jan 13, 2019 16:24 | | Subject: | Re: Inventory Change Request for Set 8214-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, FreeStorm writes:
| | PS: I do made request for part ID:410523
|
PS: I do NOT made request for part ID:410523
|
|
|
|
|
|
|
| Author: | FreeStorm | | Posted: | Jan 13, 2019 15:38 | | Subject: | Re: Inventory Change Request for Set 7936-1 | | Viewed: | 10 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, FreeStorm writes:
Image posted for future reference in case hyperlink becomes unusable.
We can see on the picture that we don't have the "groove"
|
|
|
| Author: | FreeStorm | | Posted: | Jan 13, 2019 15:31 | | Subject: | Re: Inventory Change Request for Set 3222-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, FreeStorm writes:
Image posted for future reference in case hyperlink becomes unusable.
We can see on the picture that we don't have the "groove"
|
|
|
| Author: | FreeStorm | | Posted: | Jan 13, 2019 15:26 | | Subject: | Re: Inventory Change Request for Set 30021-1 | | Viewed: | 17 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, FreeStorm writes:
| | Please make changes to the following inventory:
* Change 1 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 1 Part White {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Source:
https://youtu.be/5sd_vsI66so
https://www.flickr.com/photos/24166730@N07/4568984535/in/photostream/
|
Image posted for future reference in case hyperlink becomes unusable.
We can see on the picture that we don't have the "groove"
|
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
Portugal
Australia, Victoria
France, Île-de-France
Poland, w. Wielkopolskie
United Kingdom, England
Germany, Baden-Württemberg
)
)
)
)
)
)
Canada, Alberta
)
)
Spain, Andalucia Ceuta i Melilla
)
)
)
)
Denmark
Belgium, Oost-Vlaanderen
Switzerland, Vaud
