Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | SezaR | Posted: | Dec 4, 2018 23:27 | Subject: | Re: Inventory Change Request for Set 7735-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 6 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Delete 6 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 3 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 3 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
|
|
Reza -
Assuming that you know where the images are located on the web, could you please
add hyperlinks to where you find the images in your requests?
The hyperlinks may not always be valid, but at least I can look them over for
now.
Thanks,
Randy
|
Randy,
I have saved many photos of used, MISB, or sealed copies for various train sets
from 80s and even before 80s. I got them either from their owners or from past
auctions. So I cannot always find any link as those links are mostly broken by
now. My friend Morris (lego.12vtrains) has saved many photos since 2014-15 and
shared them with me.
For this set, I have photos of many copies. I have also bought an MISB one and
it is currently in the custom office.
One photo is taken from the store Bluxe. You can find easily his photos on facebook.
Search Bluxe. (can I add a link to facebook here?)
Nkiss82 sent me photos of his MISB copy. I used them already for this request:
https://www.bricklink.com/messageThread.asp?ID=244678
Thanks,
Reza
|
|
Author: | SezaR | Posted: | Dec 4, 2018 23:18 | Subject: | Re: Inventory Change Request for Set 6686-1 | Viewed: | 14 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, elias3 writes:
| Please make changes to the following inventory:
* Add 1 Part 6686stk01 (Not Applicable) Sticker for Set 6686 - (195055) (match ID 99)
* Add 1 Part 3010 White Brick 1 x 4 (match ID 99)
* Change 1 Part White 3010p06 Brick 1 x 4 with Red Danger Stripes on Un-Printed Background Pattern {Regular to Alternate} {match ID 0 to 99}
Comments from Submitter:
This stickersheet came in early releases of this set. add also the regular 1x4 bricks and the already in pattern red/white stripes pattern move to the alt. section. So make the '99' MID.
|
https://www.bricklink.com/message.asp?ID=1118337
|
|
Author: | SezaR | Posted: | Dec 4, 2018 23:16 | Subject: | Re: Inventory Change Request for Set 6686-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
|
My copy is 66%-NIB! One bag out of three is opened (the one including (4073c01
trans-yellow) and two white printed tiles
[p=3068bp06]
and
[p=3068bp50]
and also two white rounded bricks
[p=3062b]
were removed. All the other parts are present.
My copy was the source of this inventory change request:
https://www.bricklink.com/messageThread.asp?ID=244606
The white brick
without pattern can be seen in one sealed bag.
|
|
|
Author: | randyf | Posted: | Dec 4, 2018 23:12 | Subject: | Re: Inventory Change Request for Set 7735-1 | Viewed: | 13 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 6 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Delete 6 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 3 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 3 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
|
|
Reza -
Assuming that you know where the images are located on the web, could you please
add hyperlinks to where you find the images in your requests?
The hyperlinks may not always be valid, but at least I can look them over for
now.
Thanks,
Randy
|
|
Author: | SezaR | Posted: | Dec 4, 2018 23:10 | Subject: | Inventory Change Request for Set 6686-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
|
|
Author: | SezaR | Posted: | Dec 4, 2018 22:53 | Subject: | Re: Inventory Change Request for Set 7735-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 6 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Delete 6 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 3 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 3 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
|
|
|
|
Author: | SezaR | Posted: | Dec 4, 2018 22:51 | Subject: | Inventory Change Request for Set 7735-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 6 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Delete 6 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 3 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 3 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
|
|
Author: | brox999 | Posted: | Dec 4, 2018 22:31 | Subject: | Re: 60592c01 - whos idea was this? | Viewed: | 56 times | Topic: | Catalog | |
|
| In Catalog, SylvainLS writes:
| In Catalog, brox999 writes:
| […]
[3930c01] is in many new sets
|
Not.
The hinge brick and the hinge plate always came separated.
| and I need
the ability to add this part to my store inventory in a new state […]
|
This assembly can’t be New: you have assembled the parts yourself, that’s the
definition of Used.
|
Rubbish, putting two brand new, unused parts together does not make them used.
I list the assembly as new if the parts came from a sealed set
|
|
Author: | StormChaser | Posted: | Dec 4, 2018 21:21 | Subject: | Re: Bored? I Need Help | Viewed: | 58 times | Topic: | Catalog | |
|
| In General, StormChaser writes:
| I am absolutely going to need help with these definitions
|
I'll do:
2nd Section: F, G, H, I, J
This only leaves the 4th and 5th sections which still need to be worked on.
|
|
Author: | randyf | Posted: | Dec 4, 2018 18:12 | Subject: | Re: 40292 minifig error | Viewed: | 28 times | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| In Catalog, randyf writes:
I need to make it clear that these are not official guidelines. I have been
working on a project to rework the catalog Help Center and the page linked to
above is a proposed page which is not yet complete or official.
The current catalog guidelines still in effect are only those on the left
side of this page:
https://www.bricklink.com/help.asp?topicID=21
The sections on the right side of the page are proposals and are works in progress.
|
My bad, Robert. I forgot that those sections were the "work in progress" ones.
The section that I was referencing about minifigures being added to the catalog
in your new version contains the same basic information as the old version but
worded in a much friendlier way. Therefore, everything that I posted is not
affected by which version someone references.
The page I should have referred to was https://www.bricklink.com/help.asp?helpID=71
Cheers,
Randy
|
|
Author: | axaday | Posted: | Dec 4, 2018 18:04 | Subject: | Re: 40292 minifig error | Viewed: | 25 times | Topic: | Catalog | |
|
| In Catalog, Teup writes:
| Well, I actually agree with yorbrick the "boy" should be added to the catalog.
I understand the Bricklink catalog follows the instructions and that is a good
and smart choice, but how far will we go? When I saw the set my first thought
was like "only a girl? oh wait a sec, there's the boy hair" and the box literally
has the boy on the side of the box. To me the hair seems off on the dad and he's
not shown that way either. Nor is it logical that a minifig has an extra piece
to make a marginally different minifig with no different meaning. The torso of
the child is clearly unisex (if not boyish) so in my opinion everything points
to the hairpiece being intended for the child.
If so, it begs the question if we really want to stick 100% to the instructions
in every case. I think at least adding minfigs that are shown on the box as alternates
is not such a stretch.
|
I think you are not asking for what we ultimately want, perhaps because you are
aware that it is as far as we can get without the programmers getting involved.
What we ultimately want is to be able to put alternates into minifig inventories.
There are quite a LOT of minifigs the last few years that come with a hair and
a hat, usually pictured somewhere with each. I think it would clutter things
up a lot. Look at [s-60134-1] and . They have a certain way they
are designed to go, but the instructions show some pictures of them all mixed
and matched, legs, torsos, heads and hair. They each have 15 minifigs. How
many variants does that inventory need to have in it?
|
|
Author: | StormChaser | Posted: | Dec 4, 2018 17:38 | Subject: | Re: 40292 minifig error | Viewed: | 41 times | Topic: | Catalog | |
|
| In Catalog, randyf writes:
I need to make it clear that these are not official guidelines. I have been
working on a project to rework the catalog Help Center and the page linked to
above is a proposed page which is not yet complete or official.
The current catalog guidelines still in effect are only those on the left
side of this page:
https://www.bricklink.com/help.asp?topicID=21
The sections on the right side of the page are proposals and are works in progress.
|
|
Author: | Hygrotus | Posted: | Dec 4, 2018 16:04 | Subject: | Re: 42082 extra items | Viewed: | 40 times | Topic: | Inventories | |
|
| In Inventories, xxxzanka writes:
| In Inventories, xxxzanka writes:
| It seems to me one trans clear 1x1 plate is missing as extra parts (I have 3
in step 8 bags, 2 used in step 8).
Giancarlo
|
Tile not plate, sorry
|
Yes you have right it is visible in this review
https://youtu.be/FTrlyFYOoes?t=21m13s
Please consider submiting invetory change request here
https://www.bricklink.com/catalogInvChange.asp?itemType=S
BTW Are you able to check rest of the inventory. Parts count on box is 4057.
Currently in this inventory we have 4056 parts. Is there missing something more?
|
|
Author: | xxxzanka | Posted: | Dec 4, 2018 15:56 | Subject: | Re: 42082 extra items | Viewed: | 28 times | Topic: | Inventories | |
|
| In Inventories, xxxzanka writes:
| It seems to me one trans clear 1x1 plate is missing as extra parts (I have 3
in step 8 bags, 2 used in step 8).
Giancarlo
|
Tile not plate, sorry
|
Author: | xxxzanka | Posted: | Dec 4, 2018 15:53 | Subject: | 42082 extra items | Viewed: | 76 times | Topic: | Inventories | Status: | Open | |
|
| It seems to me one trans clear 1x1 plate is missing as extra parts (I have 3
in step 8 bags, 2 used in step 8).
Giancarlo
|
Author: | randyf | Posted: | Dec 4, 2018 13:28 | Subject: | Re: 40292 minifig error | Viewed: | 32 times | Topic: | Catalog | |
|
| In Catalog, axaday writes:
| In Catalog, Teup writes:
| Nor is it logical that a minifig has an extra piece
to make a marginally different minifig with no different meaning.
|
|
And that is what we refer to as the "slippery slope".
Randy
|
|
Author: | randyf | Posted: | Dec 4, 2018 13:24 | Subject: | Re: 40292 minifig error | Viewed: | 27 times | Topic: | Catalog | |
|
| In Catalog, Teup writes:
| Well, I actually agree with yorbrick the "boy" should be added to the catalog.
|
Your opinion has been noted and future admin teams may decide to go in that direction.
However, the current admin team on both the catalog and inventory sides had discussions
and agreed on how to proceed in this situation. I do not see that changing for
the foreseeable future.
| I understand the Bricklink catalog follows the instructions and that is a good
and smart choice, but how far will we go?
|
There are a few other situations like this that I know of from my personal collection.
In all of those cases, the current guidelines that are in place were followed
in the catalog and subsequently the inventories. So, for now, it makes sense
to keep things consistent with the guidelines to keep the catalog consistent.
| To me the hair seems off on the dad and he's not shown that way either.
|
First of all, you are assuming that it is a dad, but I do to. What is not an
assumption is that he *is* shown that way in one version of the instructions:
https://www.bricklink.com/message.asp?ID=1117220
| Nor is it logical that a minifig has an extra piece to make a marginally different
minifig with no different meaning.
|
Since when was LEGO logical? They already had *two* attempts at this, and
according to you, they screwed up on both of them. Who are we to say that it
is not the way they intended it? Third time's a charm?
| The torso of the child is clearly unisex (if not boyish)
|
If the torso is *clearly* unisex, then how could it be "boyish"?
| so in my opinion everything points to the hairpiece being intended for the child.
If so, it begs the question if we really want to stick 100% to the instructions
in every case.
|
As I stated above, at least for the foreseeable future, the answer is "yes".
If Robert, Ronald and Maggie want to add this topic to the Catalog Roadmap, then
I don't see why it could not be considered. I would not expect it to have
any sort of large priority, though.
Thanks for your comments,
Randy
|
|
Author: | axaday | Posted: | Dec 4, 2018 13:16 | Subject: | Re: 40292 minifig error | Viewed: | 29 times | Topic: | Catalog | |
|
| In Catalog, Teup writes:
| Nor is it logical that a minifig has an extra piece
to make a marginally different minifig with no different meaning.
|
|
|
Author: | Teup | Posted: | Dec 4, 2018 12:33 | Subject: | Re: 40292 minifig error | Viewed: | 39 times | Topic: | Catalog | |
|
| In Catalog, randyf writes:
| In Catalog, yorbrick writes:
| Although they cannot sell it as a boy as depicted on the box, unless listed as
a custom minifig. No doubt in time people will wonder which minifigure they have
and not be able to match up the boy version with a minifigure in the catalogue.
|
Many questions come up in the forum to identify minifigures that have the wrong
hands, the wrong arms, the wrong legs, the wrong head, the wrong hair, etc. Such
is the nature of LEGO parts; they get played with and mixed up all the time.
Sellers are free to sell those minifigures as "customs", but it behooves them
to find a closely related minifigure in the catalog to sell under and either
sell it as incomplete or fix the minifigure they have to match the one in the
catalog. I don't see this scenario as being any different to that.
However, when it comes to adding minifigures to the catalog, the guidelines are
clear and were followed: https://www.bricklink.com/help.asp?helpID=2477
If they weren't followed, we would have the inevitable question, "Why was
this boy minifigure added to the catalog when it clearly isn't shown in the
instructions?"
Cheers,
Randy
|
Well, I actually agree with yorbrick the "boy" should be added to the catalog.
I understand the Bricklink catalog follows the instructions and that is a good
and smart choice, but how far will we go? When I saw the set my first thought
was like "only a girl? oh wait a sec, there's the boy hair" and the box literally
has the boy on the side of the box. To me the hair seems off on the dad and he's
not shown that way either. Nor is it logical that a minifig has an extra piece
to make a marginally different minifig with no different meaning. The torso of
the child is clearly unisex (if not boyish) so in my opinion everything points
to the hairpiece being intended for the child.
If so, it begs the question if we really want to stick 100% to the instructions
in every case. I think at least adding minfigs that are shown on the box as alternates
is not such a stretch.
|
|
Author: | normann1974 | Posted: | Dec 4, 2018 12:33 | Subject: | Inventory Change Request for Set 10259-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Light Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 2 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
Source: Sealed set just opened. LBG with groove, DBG without.
|
|
Author: | normann1974 | Posted: | Dec 4, 2018 12:27 | Subject: | Inventory Change Request for Set 10259-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part bb219 Dark Bluish Gray Train, Track Plastic (RC Trains) Connection/Stacking Pin for Track Storage (Extra)
Comments from Submitter:
I wonder why this is missing from the current inventory. Anyway, it was (as expected) in the stack o'tracks in the set I just opened and built. This inventory is also missing all stickered parts. I'll probably do them when I disassemble my set after Christmas.
|
|
Author: | randyf | Posted: | Dec 4, 2018 12:27 | Subject: | Re: 40292 minifig error | Viewed: | 29 times | Topic: | Catalog | |
|
| In Catalog, yorbrick writes:
| Although they cannot sell it as a boy as depicted on the box, unless listed as
a custom minifig. No doubt in time people will wonder which minifigure they have
and not be able to match up the boy version with a minifigure in the catalogue.
|
Many questions come up in the forum to identify minifigures that have the wrong
hands, the wrong arms, the wrong legs, the wrong head, the wrong hair, etc. Such
is the nature of LEGO parts; they get played with and mixed up all the time.
Sellers are free to sell those minifigures as "customs", but it behooves them
to find a closely related minifigure in the catalog to sell under and either
sell it as incomplete or fix the minifigure they have to match the one in the
catalog. I don't see this scenario as being any different to that.
However, when it comes to adding minifigures to the catalog, the guidelines are
clear and were followed: https://www.bricklink.com/help.asp?helpID=2477
If they weren't followed, we would have the inevitable question, "Why was
this boy minifigure added to the catalog when it clearly isn't shown in the
instructions?"
Cheers,
Randy
|
|
Author: | elias3 | Posted: | Dec 4, 2018 10:52 | Subject: | Re: Inventory Change Request for Set 7745-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, elias3 writes:
| Please make changes to the following inventory:
* Delete 4 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Delete 4 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 2 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
|
See also post from Reza: https://www.bricklink.com/message.asp?ID=1086785
|
|
|
Author: | elias3 | Posted: | Dec 4, 2018 10:43 | Subject: | Inventory Change Request for Set 7745-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 4 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Delete 4 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 2 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
|
|
Author: | yorbrick | Posted: | Dec 4, 2018 08:50 | Subject: | Re: 40292 minifig error | Viewed: | 38 times | Topic: | Catalog | |
|
| | And anyone can change the interpretation (and minifigs) to better represent their
own situation.
|
Although they cannot sell it as a boy as depicted on the box, unless listed as
a custom minifig. No doubt in time people will wonder which minifigure they have
and not be able to match up the boy version with a minifigure in the catalogue.
|
|
Author: | Teup | Posted: | Dec 4, 2018 08:21 | Subject: | Re: 40292 minifig error | Viewed: | 27 times | Topic: | Catalog | |
|
| In Catalog, SylvainLS writes:
| In Catalog, Teup writes:
| […]
Haha that's crazy, seems the person making the instructions made the mistake.
I guess Bricklink follows the instructions and not the box, so probably it should
stay like this then... Although unless dad has a job as a hairdresser or fashion
designer I do think he looks a bit off with that kids/teenage haircut
|
Well, we’re assuming it’s a “dad”. It could be a “big brother” or a “young uncle”
too
And anyone can change the interpretation (and minifigs) to better represent their
own situation.
|
I guess if dad really is a hairdresser or fashion designer, the girl's hair
could be even better
|
|
Author: | SylvainLS | Posted: | Dec 4, 2018 07:23 | Subject: | Re: 40292 minifig error | Viewed: | 41 times | Topic: | Catalog | |
|
| In Catalog, Teup writes:
| […]
Haha that's crazy, seems the person making the instructions made the mistake.
I guess Bricklink follows the instructions and not the box, so probably it should
stay like this then... Although unless dad has a job as a hairdresser or fashion
designer I do think he looks a bit off with that kids/teenage haircut
|
Well, we’re assuming it’s a “dad”. It could be a “big brother” or a “young uncle”
too
And anyone can change the interpretation (and minifigs) to better represent their
own situation.
|
|
Author: | Teup | Posted: | Dec 4, 2018 07:10 | Subject: | Re: 40292 minifig error | Viewed: | 43 times | Topic: | Catalog | |
|
| In Catalog, SylvainLS writes:
| In Catalog, Teup writes:
|
LOL, so the Christmas giftset 40292 has a male and a female hairpiece so that
the child can be a boy or a girl (and they're both on the box). But someone
uploaded a picture where the alternate hair is put on the DAD's head, kind
of making it a dad's hairdo optionality feature
https://www.bricklink.com/catalogItemInv.asp?S=40292-1
|
Actually, it IS a “dad’s hairdo optionality feature”: there are two versions
of the instructions and each one uses different hair for the dad.
See https://www.bricklink.com/message.asp?ID=1117220
|
Haha that's crazy, seems the person making the instructions made the mistake.
I guess Bricklink follows the instructions and not the box, so probably it should
stay like this then... Although unless dad has a job as a hairdresser or fashion
designer I do think he looks a bit off with that kids/teenage haircut
|
|
Author: | SylvainLS | Posted: | Dec 4, 2018 06:56 | Subject: | Re: 40292 minifig error | Viewed: | 39 times | Topic: | Catalog | |
|
| In Catalog, Teup writes:
|
LOL, so the Christmas giftset 40292 has a male and a female hairpiece so that
the child can be a boy or a girl (and they're both on the box). But someone
uploaded a picture where the alternate hair is put on the DAD's head, kind
of making it a dad's hairdo optionality feature
https://www.bricklink.com/catalogItemInv.asp?S=40292-1
|
Actually, it IS a “dad’s hairdo optionality feature”: there are two versions
of the instructions and each one uses different hair for the dad.
See https://www.bricklink.com/message.asp?ID=1117220
|
|
Author: | Teup | Posted: | Dec 4, 2018 06:32 | Subject: | 40292 minifig error | Viewed: | 130 times | Topic: | Catalog | Status: | Open | |
|
|
LOL, so the Christmas giftset 40292 has a male and a female hairpiece so that
the child can be a boy or a girl (and they're both on the box). But someone
uploaded a picture where the alternate hair is put on the DAD's head, kind
of making it a dad's hairdo optionality feature
https://www.bricklink.com/catalogItemInv.asp?S=40292-1
|
|
Author: | SezaR | Posted: | Dec 4, 2018 03:46 | Subject: | Re: Inventory Change Request for Set 7839-1 | Viewed: | 17 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 4 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 4 Part 4624 Light Gray Wheel 8mm D. x 6mm
* Delete 2 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
* Change 4 Part Light Gray 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
|
Photos 1 and 2 from here:
http://www.brickshelf.com/cgi-bin/gallery.cgi?f=300763
Photos 3 and 4 from some old item on facebook.
|
|
|
Author: | SezaR | Posted: | Dec 4, 2018 03:42 | Subject: | Inventory Change Request for Set 7839-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 4 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 4 Part 4624 Light Gray Wheel 8mm D. x 6mm
* Delete 2 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
* Change 4 Part Light Gray 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
|
|
|
Author: | SezaR | Posted: | Dec 4, 2018 03:34 | Subject: | Inventory Change Request for Set 7823-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 1 Part 3070b Red Tile 1 x 1 with Groove (Extra)
|
|
Author: | SezaR | Posted: | Dec 4, 2018 02:53 | Subject: | Re: Inventory Change Request for Set 6391-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 2 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
|
|
|
|
Author: | SezaR | Posted: | Dec 4, 2018 02:51 | Subject: | Inventory Change Request for Set 6391-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
|
|
Author: | FreeStorm | Posted: | Dec 4, 2018 02:35 | Subject: | Re: Inventory Change Request for Set 6392-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, FreeStorm writes:
| Please make changes to the following inventory:
* Delete 39 Part 4073 White Plate, Round 1 x 1 Straight Side
* Add 20 Part 4073c01 White Plate, Round 1 x 1, 2 on Sprue
* Delete 22 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Add 11 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
* Delete 11 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Delete 1 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side (Extra)
* Add 6 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
Comments from Submitter:
Source: sealed box
I modified only parts I can see inside the blister.
I think other color come on Sprue, but I didn't see them.
How do you deal with odd count of regular parts?
39 = 19 X 2 + 1 and 1 extra?
|
On pictures, you can't see clearly trans-red parts.
But I've seen the Sprue by eyes
|
|
|
Author: | FreeStorm | Posted: | Dec 4, 2018 02:26 | Subject: | Inventory Change Request for Set 6392-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 39 Part 4073 White Plate, Round 1 x 1 Straight Side
* Add 20 Part 4073c01 White Plate, Round 1 x 1, 2 on Sprue
* Delete 22 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Add 11 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
* Delete 11 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Delete 1 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side (Extra)
* Add 6 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
Comments from Submitter:
Source: sealed box
I modified only parts I can see inside the blister.
I think other color come on Sprue, but I didn't see them.
How do you deal with odd count of regular parts?
39 = 19 X 2 + 1 and 1 extra?
|
|
Author: | SezaR | Posted: | Dec 4, 2018 02:13 | Subject: | Re: Inventory Change Request for Set 1484-1 | Viewed: | 12 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 2 Part 4073 Black Plate, Round 1 x 1 Straight Side
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Delete 4 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 4 Part 4624 White Wheel 8mm D. x 6mm
* Add 1 Part 4073c01 Black Plate, Round 1 x 1, 2 on Sprue
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
* Change 4 Part White 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
|
|
|
|
Author: | SezaR | Posted: | Dec 4, 2018 02:11 | Subject: | Inventory Change Request for Set 1484-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 4073 Black Plate, Round 1 x 1 Straight Side
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Delete 4 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 4 Part 4624 White Wheel 8mm D. x 6mm
* Add 1 Part 4073c01 Black Plate, Round 1 x 1, 2 on Sprue
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
* Change 4 Part White 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
|
|