Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | brik_en_tik | Posted: | May 6, 2021 05:16 | Subject: | Re: baseplate 16 x 21 | Viewed: | 58 times | Topic: | Catalog | |
|
| In Catalog, tonnic writes:
| In Catalog, brik_en_tik writes:
| I have a LEGO green baseplate with 16 x 21 studs, which does not seem to exist
on Bricklink (one size smaller is 16 x 18 and one bigger is 16 x 22). It is a
genuine LEGO baseplate, which is not cut, not broken or damaged whatsoever so
I'm wondering to which set this baseplate might belong. I suspect something
from Fabuland 3664 since I have other bricks from this set, but I'm not sure.
Can someone help me out? Picture is uploaded.
|
These were cut in the factory.
I do not know if it was done by an employee with a ‘cuttingmachine’ but maybe
it was miscalculated.
So a really nice survivor.
|
Can I sell this item on Bricklink?
|
|
Author: | tonnic | Posted: | May 6, 2021 04:52 | Subject: | Re: baseplate 16 x 21 | Viewed: | 59 times | Topic: | Catalog | |
|
| In Catalog, brik_en_tik writes:
| I have a LEGO green baseplate with 16 x 21 studs, which does not seem to exist
on Bricklink (one size smaller is 16 x 18 and one bigger is 16 x 22). It is a
genuine LEGO baseplate, which is not cut, not broken or damaged whatsoever so
I'm wondering to which set this baseplate might belong. I suspect something
from Fabuland 3664 since I have other bricks from this set, but I'm not sure.
Can someone help me out? Picture is uploaded.
|
These were cut in the factory.
I do not know if it was done by an employee with a ‘cuttingmachine’ but maybe
it was miscalculated.
So a really nice survivor.
|
|
Author: | tec | Posted: | May 6, 2021 04:41 | Subject: | Re: baseplate 16 x 21 | Viewed: | 61 times | Topic: | Catalog | |
|
| Since authenticity isn't discussed, I find it plausible that a defective
16x22 escaped the factory in the '70
|
|
Author: | Stellar | Posted: | May 6, 2021 04:38 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 40 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| Greetings BrickLink catalog enthusiasts!
You will be pleased to learn that we have just today appointed a new Catalog
Associate - Randyf. Randy has served as an Inventories Administrator for the
last couple years and has done a fantastic job. We feel this promotion, though
it has been long in coming, is very well deserved.
As a reminder to those who are still learning about the BrickLink Community Expert
Program, the Catalog Associate position gives admin privileges over the entire
catalog half of our BrickLink system. After one year's experience, Catalog
Associates are eligible for promotion to full Catalog Admin, which gives them
full privileges on both sides, for both catalog and inventories.
https://www.bricklink.com/memberAdmins.asp
We plan to update the Hall of Fame page very soon. There are several things to
add, including Randy's time serving as Inventory Admin.
Please welcome our new associate!
|
Thanks for your efforts Randy!
|
|
Author: | leggodtshop | Posted: | May 6, 2021 04:32 | Subject: | Re: baseplate 16 x 21 | Viewed: | 43 times | Topic: | Catalog | |
|
| In Catalog, brik_en_tik writes:
| I have a LEGO green baseplate with 16 x 21 studs, which does not seem to exist
on Bricklink (one size smaller is 16 x 18 and one bigger is 16 x 22). It is a
genuine LEGO baseplate, which is not cut, not broken or damaged whatsoever so
I'm wondering to which set this baseplate might belong. I suspect something
from Fabuland 3664 since I have other bricks from this set, but I'm not sure.
Can someone help me out? Picture is uploaded.
|
Maybe it's just a misprint and made it through quality control...
|
Author: | tec | Posted: | May 6, 2021 04:25 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 30 times | Topic: | Catalog | |
|
| Great news, great choice. I wish Randyf the best of luck |
Author: | brik_en_tik | Posted: | May 6, 2021 04:13 | Subject: | baseplate 16 x 21 | Viewed: | 129 times | Topic: | Catalog | Status: | Open | |
|
| I have a LEGO green baseplate with 16 x 21 studs, which does not seem to exist
on Bricklink (one size smaller is 16 x 18 and one bigger is 16 x 22). It is a
genuine LEGO baseplate, which is not cut, not broken or damaged whatsoever so
I'm wondering to which set this baseplate might belong. I suspect something
from Fabuland 3664 since I have other bricks from this set, but I'm not sure.
Can someone help me out? Picture is uploaded.
|
|
Author: | SylvainLS | Posted: | May 6, 2021 02:44 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 33 times | Topic: | Catalog | |
|
| Well done randyf! |
|
Author: | Brickwilbo | Posted: | May 6, 2021 02:14 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 26 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| Greetings BrickLink catalog enthusiasts!
You will be pleased to learn that we have just today appointed a new Catalog
Associate - Randyf. Randy has served as an Inventories Administrator for the
last couple years and has done a fantastic job. We feel this promotion, though
it has been long in coming, is very well deserved.
As a reminder to those who are still learning about the BrickLink Community Expert
Program, the Catalog Associate position gives admin privileges over the entire
catalog half of our BrickLink system. After one year's experience, Catalog
Associates are eligible for promotion to full Catalog Admin, which gives them
full privileges on both sides, for both catalog and inventories.
https://www.bricklink.com/memberAdmins.asp
We plan to update the Hall of Fame page very soon. There are several things to
add, including Randy's time serving as Inventory Admin.
Please welcome our new associate!
|
Congratulations Randy!
|
|
Author: | FantasyBricks | Posted: | May 5, 2021 20:33 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 31 times | Topic: | Catalog | |
|
| Congratulations, Randyf! |
|
Author: | atkk | Posted: | May 5, 2021 20:22 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 31 times | Topic: | Catalog | |
|
| Welcome Randy!!!
In Catalog, Admin_Russell writes:
| Greetings BrickLink catalog enthusiasts!
You will be pleased to learn that we have just today appointed a new Catalog
Associate - Randyf. Randy has served as an Inventories Administrator for the
last couple years and has done a fantastic job. We feel this promotion, though
it has been long in coming, is very well deserved.
As a reminder to those who are still learning about the BrickLink Community Expert
Program, the Catalog Associate position gives admin privileges over the entire
catalog half of our BrickLink system. After one year's experience, Catalog
Associates are eligible for promotion to full Catalog Admin, which gives them
full privileges on both sides, for both catalog and inventories.
https://www.bricklink.com/memberAdmins.asp
We plan to update the Hall of Fame page very soon. There are several things to
add, including Randy's time serving as Inventory Admin.
Please welcome our new associate!
|
|
|
Author: | MrPetovan | Posted: | May 5, 2021 19:28 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 32 times | Topic: | Catalog | |
|
| Congratulations Randy, I know we haven't always seen each other eye to eye,
but I'm not holding any grudge, and I hope you won't either!
In Catalog, Admin_Russell writes:
| Greetings BrickLink catalog enthusiasts!
You will be pleased to learn that we have just today appointed a new Catalog
Associate - Randyf. Randy has served as an Inventories Administrator for the
last couple years and has done a fantastic job. We feel this promotion, though
it has been long in coming, is very well deserved.
As a reminder to those who are still learning about the BrickLink Community Expert
Program, the Catalog Associate position gives admin privileges over the entire
catalog half of our BrickLink system. After one year's experience, Catalog
Associates are eligible for promotion to full Catalog Admin, which gives them
full privileges on both sides, for both catalog and inventories.
https://www.bricklink.com/memberAdmins.asp
We plan to update the Hall of Fame page very soon. There are several things to
add, including Randy's time serving as Inventory Admin.
Please welcome our new associate!
|
|
|
Author: | Nubs_Select | Posted: | May 5, 2021 19:06 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 26 times | Topic: | Catalog | |
|
| Welcome! Thankyou! |
|
Author: | SezaR | Posted: | May 5, 2021 19:00 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 23 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| Greetings BrickLink catalog enthusiasts!
You will be pleased to learn that we have just today appointed a new Catalog
Associate - Randyf. Randy has served as an Inventories Administrator for the
last couple years and has done a fantastic job. We feel this promotion, though
it has been long in coming, is very well deserved.
As a reminder to those who are still learning about the BrickLink Community Expert
Program, the Catalog Associate position gives admin privileges over the entire
catalog half of our BrickLink system. After one year's experience, Catalog
Associates are eligible for promotion to full Catalog Admin, which gives them
full privileges on both sides, for both catalog and inventories.
https://www.bricklink.com/memberAdmins.asp
We plan to update the Hall of Fame page very soon. There are several things to
add, including Randy's time serving as Inventory Admin.
Please welcome our new associate!
|
Such a great news.
Welcome abord Randy
As a first step, what about addking 100 items to the catalog?
|
|
Author: | Stuart9 | Posted: | May 5, 2021 18:56 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 25 times | Topic: | Catalog | |
|
| Never heard of him.
Congratulations.
In Catalog, Admin_Russell writes:
| Greetings BrickLink catalog enthusiasts!
You will be pleased to learn that we have just today appointed a new Catalog
Associate - Randyf. Randy has served as an Inventories Administrator for the
last couple years and has done a fantastic job. We feel this promotion, though
it has been long in coming, is very well deserved.
As a reminder to those who are still learning about the BrickLink Community Expert
Program, the Catalog Associate position gives admin privileges over the entire
catalog half of our BrickLink system. After one year's experience, Catalog
Associates are eligible for promotion to full Catalog Admin, which gives them
full privileges on both sides, for both catalog and inventories.
https://www.bricklink.com/memberAdmins.asp
We plan to update the Hall of Fame page very soon. There are several things to
add, including Randy's time serving as Inventory Admin.
Please welcome our new associate!
|
|
|
Author: | axaday | Posted: | May 5, 2021 18:56 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 25 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| We feel this promotion, though
it has been long in coming, is very well deserved.
|
Couldn't have happened to a better guy.
|
|
Author: | wildchicken13 | Posted: | May 5, 2021 18:41 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 28 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| Greetings BrickLink catalog enthusiasts!
You will be pleased to learn that we have just today appointed a new Catalog
Associate - Randyf. Randy has served as an Inventories Administrator for the
last couple years and has done a fantastic job. We feel this promotion, though
it has been long in coming, is very well deserved.
As a reminder to those who are still learning about the BrickLink Community Expert
Program, the Catalog Associate position gives admin privileges over the entire
catalog half of our BrickLink system. After one year's experience, Catalog
Associates are eligible for promotion to full Catalog Admin, which gives them
full privileges on both sides, for both catalog and inventories.
https://www.bricklink.com/memberAdmins.asp
We plan to update the Hall of Fame page very soon. There are several things to
add, including Randy's time serving as Inventory Admin.
Please welcome our new associate!
|
Congratulations, Randy!
|
|
Author: | Admin_Russell | Posted: | May 5, 2021 18:32 | Subject: | We have a new Catalog Associate! | Viewed: | 220 times | Topic: | Catalog | Status: | Open | |
|
|
BrickLink ID CardAdmin_Russell
|
Location: USA, California |
Member Since |
Contact |
Type |
Status |
May 9, 2017 |
|
Admin |
|
|
BrickLink Administrator |
|
| Greetings BrickLink catalog enthusiasts!
You will be pleased to learn that we have just today appointed a new Catalog
Associate - Randyf. Randy has served as an Inventories Administrator for the
last couple years and has done a fantastic job. We feel this promotion, though
it has been long in coming, is very well deserved.
As a reminder to those who are still learning about the BrickLink Community Expert
Program, the Catalog Associate position gives admin privileges over the entire
catalog half of our BrickLink system. After one year's experience, Catalog
Associates are eligible for promotion to full Catalog Admin, which gives them
full privileges on both sides, for both catalog and inventories.
https://www.bricklink.com/memberAdmins.asp
We plan to update the Hall of Fame page very soon. There are several things to
add, including Randy's time serving as Inventory Admin.
Please welcome our new associate!
|
|
Author: | Leftoverbricks | Posted: | May 5, 2021 03:52 | Subject: | Re: Pending approval: mineravager01 | Viewed: | 30 times | Topic: | Catalog | |
|
| In Catalog, Turez writes:
| In Catalog, Leftoverbricks writes:
| In Catalog, Leftoverbricks writes:
| Can I help the inventory/catalog admin with this part?
|
Bumping this because I got no reply on my previous post. A newish user reserved
this part mineavager01 six weeks ago. It still has the status of 'pending'.
|
Um, no.
https://www.bricklink.com/catalogListOld.asp?invPend=Y
I don't see anything that would prevent you from submitting the inventory.
| I would like to know if there's as problem with this part that prohibits
the inventory admins from adding it.
In general I know quite a bit about Minecraft in general and have successfully
contributed a couple of the brick built animals to the catalogue so far .
Ask me, I gladly help!
FYI: Here's a knolling picture of this part which I used to build it.
|
|
A couple of days ago this part was reserved, but it has been cancelled. I'm
now able to add the inventory (done, pending) and change dimensions etc. (partly
done).
Thanks!
|
|
Author: | BricksThatStick | Posted: | May 4, 2021 14:13 | Subject: | Re: Pending approval: mineravager01 | Viewed: | 53 times | Topic: | Catalog | |
|
| In Catalog, Leftoverbricks writes:
| In Catalog, Leftoverbricks writes:
| Can I help the inventory/catalog admin with this part?
|
Bumping this because I got no reply on my previous post. A newish user reserved
this part mineavager01 six weeks ago. It still has the status of 'pending'.
I would like to know if there's as problem with this part that prohibits
the inventory admins from adding it.
In general I know quite a bit about Minecraft in general and have successfully
contributed a couple of the brick built animals to the catalogue so far .
Ask me, I gladly help!
FYI: Here's a knolling picture of this part which I used to build it.
|
Thanks for the picture - it was approved a couple of days ago:
|
|
Author: | Turez | Posted: | May 4, 2021 12:54 | Subject: | Re: Pending approval: mineravager01 | Viewed: | 51 times | Topic: | Catalog | |
|
| In Catalog, Leftoverbricks writes:
| In Catalog, Leftoverbricks writes:
| Can I help the inventory/catalog admin with this part?
|
Bumping this because I got no reply on my previous post. A newish user reserved
this part mineavager01 six weeks ago. It still has the status of 'pending'.
|
Um, no.
https://www.bricklink.com/catalogListOld.asp?invPend=Y
I don't see anything that would prevent you from submitting the inventory.
| I would like to know if there's as problem with this part that prohibits
the inventory admins from adding it.
In general I know quite a bit about Minecraft in general and have successfully
contributed a couple of the brick built animals to the catalogue so far .
Ask me, I gladly help!
FYI: Here's a knolling picture of this part which I used to build it.
|
|
|
Author: | Leftoverbricks | Posted: | May 4, 2021 12:42 | Subject: | Re: Pending approval: mineravager01 | Viewed: | 37 times | Topic: | Catalog | |
|
| In Catalog, Leftoverbricks writes:
| Can I help the inventory/catalog admin with this part?
|
Bumping this because I got no reply on my previous post. A newish user reserved
this part mineavager01 six weeks ago. It still has the status of 'pending'.
I would like to know if there's as problem with this part that prohibits
the inventory admins from adding it.
In general I know quite a bit about Minecraft in general and have successfully
contributed a couple of the brick built animals to the catalogue so far .
Ask me, I gladly help!
FYI: Here's a knolling picture of this part which I used to build it.
|
|
|
Author: | timtoon | Posted: | May 3, 2021 23:49 | Subject: | Re: New part color getting rejected? | Viewed: | 58 times | Topic: | Catalog | |
|
| In Catalog, crazylegoman writes:
I didn’t know that it wouldn’t show up if there wasn’t one for sale/part of a
set. Thanks for checking!
|
|
Author: | peregrinator | Posted: | May 3, 2021 21:46 | Subject: | Re: New part color getting rejected? | Viewed: | 56 times | Topic: | Catalog | |
|
| In Catalog, crazylegoman writes:
Right, it won't show up under "all" unless there's one actually for sale;
it won't show up under "known" unless there's a set that has the hair
in that color in its inventory
|
|
Author: | crazylegoman | Posted: | May 3, 2021 21:12 | Subject: | Re: New part color getting rejected? | Viewed: | 57 times | Topic: | Catalog | |
|
| In Catalog, timtoon writes:
| I'm trying to submit dark orange for part 25412, but the image just gets
deleted and I don't know what I'm doing wrong.
|
When I look here at the images of all the colors for that hair piece
https://www.bricklink.com/catalogColors.asp?itemType=P&itemNo=25412&v=2
your photo is there with your name under it.
David
|
Author: | timtoon | Posted: | May 3, 2021 20:28 | Subject: | New part color getting rejected? | Viewed: | 123 times | Topic: | Catalog | Status: | Open | |
|
| I'm trying to submit dark orange for part 25412, but the image just gets
deleted and I don't know what I'm doing wrong.
|
|
Author: | axaday | Posted: | May 3, 2021 13:07 | Subject: | Re: New Packing Dimensions Feature | Viewed: | 40 times | Topic: | Catalog | |
|
| In Catalog, qwertyboy writes:
| In Catalog, axaday writes:
| In Catalog, randyf writes:
| That graph shows everything. The tool was needed, and it was needed long before
Instant Checkout should have ever gone live. Better late than never, but the
new tool is obviously a success and will help fill in the data for IC quickly.
|
The tool depicted in that graph was me.
|
Obviously a pretty sharp tool.
Niek.
|
Mileage will vary
|
|
Author: | cosmicray | Posted: | May 3, 2021 11:44 | Subject: | Re: Catalog page Packing Dimensions Add button | Viewed: | 31 times | Topic: | Catalog | |
|
| In Suggestions, BasKrie writes:
| In Suggestions, cosmicray writes:
| When viewing a Catalog page, and I see packing dimensions missing (i.e. with
a question mark) it would be so handy if there were an Add button right there,
that takes me to the correct page, with all the parameters preloaded, and all
I have to do is enter the correct numbers. That would enable, and encourage,
many missing PDs to be added.
Nita Rae
|
https://www.bricklink.com/message.asp?ID=1267939
It's already there, just have to activate it
|
Got it, thanks !
|
|
Author: | Vosblokjes | Posted: | May 3, 2021 11:36 | Subject: | Re: Catalog page Packing Dimensions Add button | Viewed: | 25 times | Topic: | Catalog | |
|
| In Suggestions, cosmicray writes:
| When viewing a Catalog page, and I see packing dimensions missing (i.e. with
a question mark) it would be so handy if there were an Add button right there,
that takes me to the correct page, with all the parameters preloaded, and all
I have to do is enter the correct numbers. That would enable, and encourage,
many missing PDs to be added.
Nita Rae
|
https://www.bricklink.com/message.asp?ID=1267939
It's already there, just have to activate it
|
|
Author: | qwertyboy | Posted: | May 3, 2021 11:21 | Subject: | Re: Catalog page Packing Dimensions Add button | Viewed: | 22 times | Topic: | Catalog | |
|
| In Suggestions, cosmicray writes:
| When viewing a Catalog page, and I see packing dimensions missing (i.e. with
a question mark) it would be so handy if there were an Add button right there,
that takes me to the correct page, with all the parameters preloaded, and all
I have to do is enter the correct numbers. That would enable, and encourage,
many missing PDs to be added.
|
Uhmmm - can't you just click on the question mark? For me it brings up the
"change item" form.
Niek.
|
|
Author: | cosmicray | Posted: | May 3, 2021 11:13 | Subject: | Catalog page Packing Dimensions Add button | Viewed: | 61 times | Topic: | Catalog | Status: | Open | |
|
| When viewing a Catalog page, and I see packing dimensions missing (i.e. with
a question mark) it would be so handy if there were an Add button right there,
that takes me to the correct page, with all the parameters preloaded, and all
I have to do is enter the correct numbers. That would enable, and encourage,
many missing PDs to be added.
Nita Rae
|
|
Author: | normann1974 | Posted: | May 3, 2021 11:00 | Subject: | Re: Promotional set "Kamille" | Viewed: | 50 times | Topic: | Catalog | |
|
| In Catalog, wildchicken13 writes:
| In Catalog, normann1974 writes:
| A friend of mine has informed me of a promotional set "Kamille" given out to
children at one or more LEGO events by the Danish supermarket "Bilka". Kamille
is one of the supermarket's mascots. The set came in a LEGO zip-lock bag,
and it's unknown whether or not it came with instructions in the bag, it
may have been available only to the event hosts. A PDF version of the instructions
have been made available by Bilka on request.
Please see attached images.
Is this a set that is allowed to be put on BL?
/Jan
|
I don't see any reason why not; plenty of promotional sets are sold here
on BrickLink. You'll need to create a catalog entry for it first, though.
|
Yes, the catalog, that's the only thing I'm interested in. I don't
think she plans on selling the set. Because the set doesn't come with building
instructions, I don't believe it's actually worth much (it's just
standard bricks in a standard LEGO zip-lock bag).
Actually, I've found out that there is more than this single promotional
set from the events. There seems to be at least 4 others. I'll dig into it
and try to get my hands on some details.
/Jan
|
|
|
Author: | wildchicken13 | Posted: | May 2, 2021 23:01 | Subject: | Re: Promotional set "Kamille" | Viewed: | 46 times | Topic: | Catalog | |
|
| In Catalog, normann1974 writes:
| A friend of mine has informed me of a promotional set "Kamille" given out to
children at one or more LEGO events by the Danish supermarket "Bilka". Kamille
is one of the supermarket's mascots. The set came in a LEGO zip-lock bag,
and it's unknown whether or not it came with instructions in the bag, it
may have been available only to the event hosts. A PDF version of the instructions
have been made available by Bilka on request.
Please see attached images.
Is this a set that is allowed to be put on BL?
/Jan
|
I don't see any reason why not; plenty of promotional sets are sold here
on BrickLink. You'll need to create a catalog entry for it first, though.
|
|
Author: | normann1974 | Posted: | May 2, 2021 17:51 | Subject: | Promotional set "Kamille" | Viewed: | 173 times | Topic: | Catalog | Status: | Open | |
|
| A friend of mine has informed me of a promotional set "Kamille" given out to
children at one or more LEGO events by the Danish supermarket "Bilka". Kamille
is one of the supermarket's mascots. The set came in a LEGO zip-lock bag,
and it's unknown whether or not it came with instructions in the bag, it
may have been available only to the event hosts. A PDF version of the instructions
have been made available by Bilka on request.
Please see attached images.
Is this a set that is allowed to be put on BL?
/Jan
|
|
|
Author: | legoman007 | Posted: | May 2, 2021 12:51 | Subject: | Re: thumbnail gallery display | Viewed: | 34 times | Topic: | Catalog | |
|
| In Catalog, ciprinius writes:
| When i open any category in catalog there is "list with images" displayed by
default. I prefer thumbnail gallery to be default. Is there any way to set this
in settings somewhere?
|
Hi, I also just met this annyoing issue and solution is to allow more cookies.
You can adjust cookies for BL at the very bottom of the page in "Cookie Settings
and Privacy". I allowed the first three cookies and now it is working again
|
Author: | Leftoverbricks | Posted: | May 2, 2021 04:59 | Subject: | Pending approval: mineravager01 | Viewed: | 88 times | Topic: | Catalog | Status: | Open | |
|
| Can I help the inventory/catalog admin with this part? |
Author: | MKRacing66 | Posted: | Apr 30, 2021 21:47 | Subject: | Re: Lego Socks | Viewed: | 41 times | Topic: | Catalog | |
|
| Somewhere, someone, is coming up with a Lego COSPLAY outfit |
Author: | Rob_and_Shelagh | Posted: | Apr 30, 2021 17:28 | Subject: | Re: Lego Socks | Viewed: | 49 times | Topic: | Catalog | |
|
| In Catalog, cosmicray writes:
| Early this morning, out doing some shopping, and spied this LEGO endcap at WalMart.
On the side was a dino and images of LEGO socks. They were not in the endcap,
nor on the LEGO aisle. Has anyone seen these in stores ? Youth or Adult sizes
? I don't see these in the Catalog.
Nita Rae
|
that sounds like a very uncomfortable item, could be worse.. Lego underwear anyone?
ouch
Robert
|
|
Author: | FantasyBricks | Posted: | Apr 30, 2021 17:27 | Subject: | Re: Lego Socks | Viewed: | 40 times | Topic: | Catalog | |
|
| I wonder if the socks are located in the clothing areas of Walmart (men's/women's/children's).
I also wonder if there really IS a Lego dinosaur or if they just show that dinosaur
to get people's attention for the socks.
|
Author: | cosmicray | Posted: | Apr 30, 2021 17:12 | Subject: | Lego Socks | Viewed: | 174 times | Topic: | Catalog | Status: | Open | |
|
| Early this morning, out doing some shopping, and spied this LEGO endcap at WalMart.
On the side was a dino and images of LEGO socks. They were not in the endcap,
nor on the LEGO aisle. Has anyone seen these in stores ? Youth or Adult sizes
? I don't see these in the Catalog.
Nita Rae
|
|
Author: | crepundi | Posted: | Apr 30, 2021 05:20 | Subject: | image of part 3192a | Viewed: | 60 times | Topic: | Catalog | Status: | Open | |
|
| Please correct the image of door 1 x 3 x 3 right in colour blue. It
is showing the door 1 x 3 x 4
Regards,
Gisela
|
|
Author: | _djm | Posted: | Apr 29, 2021 18:38 | Subject: | Looking for set image from Dacta (?) catalog | Viewed: | 63 times | Topic: | Catalog | Status: | Open | |
|
| I'm hoping someone with Dacta catalogs from the mid(?) 1990's (perhaps
1993 - 1997) can help.
I recently acquired a somewhat obscure Control Lab set:
which I am in the process of creating the catalog inventory for. There don't
appear to be any references to this set of most of the other standard sites (e,g,
brickset, peeron) and the only image I could find of this set was at http://www.miniland.nl/Dacta/sets/2001187.htm.
The set in question is the set in the yellow case at the rear of the photo.
Via the wayback machine, I've had a trawl through LEGO's various sites
and have had no joy in finding any image for this set. Based on what I have found,
my presumption is that this set would have been listed in a Dacta catalog from
sometime in the mid-1990s - it may be that this set only was for sale in the
UK/Europe, although that is speculation on my behalf.
I was wondering whether anybody with Dacta catalogs from the mid-1990's would
be willing to take a look through their catalogs to see if they can find an image
for the set. My photo skills are "lacking" and if an image for the set is available
in a catalog, it will likely be better than any photo I add. If you do find an
image for the set, would you please submit it as the image for this set. I'd
also appreciate it if you would send me a copy of the image too please, as I
would like to be able to add this set to rebrickable.com.
Thank you and regards,
David
|
|
Author: | Erikmax | Posted: | Apr 29, 2021 06:48 | Subject: | Re: Original or coming from Ali? | Viewed: | 62 times | Topic: | Catalog | |
|
| In Catalog, yorbrick writes:
| In Catalog, Erikmax writes:
| In Catalog, enig writes:
| In Catalog, Erikmax writes:
| I recently bought YELLOW axles 50450 from a dealer on Bricklink offering them
in quantities at a reasonable price.
After arriving I noticed these axles being a bit lighter of colour. Because the
are more colour varieties I wasn't alarmed directly.
But when I looked a bit closer to the axles I also noticed the 'cross'
on the edge of the axle was a bit less sharp. I think normally there is a dimple
at one of the ends- these axes don't have one.
The combination of a quantity offer of this part, the colour difference and the
slightly rougher shape raises some questions.
If it is original: Perfect. If it isn't: How could we stop this? I guess
99% of the customers won't notice.
Or is it simply the end of the premium prices for this sort of parts??
Or place a warning with a clear description of the original?
|
* Do they have similar clutch power to the other axles? This is the first thing
to test. If not, might be an indication that they are indeed fake.
* Newer 32L axles should have ©LEGO and a mould number on them - at one of the
ends. NO mould pip at the (other) end.
* No idea if this also concerns axles, but recently we have been finding a scary
amount of pieces to be manufactured from that new bio-plastic crap. Does the
surface of those axles feel the same, and do they sound the same?
|
Thanks! The white 32 clearly has LEGO, the yellow one doesn't have it. The
material is the same. Clutch power not tested yet. So the question is: Do all
original 32 axles have the LEGO sign. Main difference is the cross the 32 had
slightly undeeper grooves and the cross is between 0,50- 1 mm thicker.
|
Mine don't have the lego sign. Although they are not as fat looking as yours.
Mine are from 2013 #60004.
|
Thanks! Yes the fat cross is the big question. But anyway you can see how difficult
it is to find out what is original and what isn't...and this is a bit worrying.
I started the whole post because I am reselling the parts and I want to be sure
that I sell original parts, especially because these parts fetch a large premium.
And of course the idea of paying 90 Euro for 10 axles that maybe can be bought
from Ali for 2 Euro all 10... free postage..If this is the case I don't blame
the seller directly, because there may be more chains in the selling process..but
if it are really fake parts someone is making a giant profit...
|
|
Author: | yorbrick | Posted: | Apr 29, 2021 06:32 | Subject: | Re: Original or coming from Ali? | Viewed: | 54 times | Topic: | Catalog | |
|
| In Catalog, Erikmax writes:
| In Catalog, enig writes:
| In Catalog, Erikmax writes:
| I recently bought YELLOW axles 50450 from a dealer on Bricklink offering them
in quantities at a reasonable price.
After arriving I noticed these axles being a bit lighter of colour. Because the
are more colour varieties I wasn't alarmed directly.
But when I looked a bit closer to the axles I also noticed the 'cross'
on the edge of the axle was a bit less sharp. I think normally there is a dimple
at one of the ends- these axes don't have one.
The combination of a quantity offer of this part, the colour difference and the
slightly rougher shape raises some questions.
If it is original: Perfect. If it isn't: How could we stop this? I guess
99% of the customers won't notice.
Or is it simply the end of the premium prices for this sort of parts??
Or place a warning with a clear description of the original?
|
* Do they have similar clutch power to the other axles? This is the first thing
to test. If not, might be an indication that they are indeed fake.
* Newer 32L axles should have ©LEGO and a mould number on them - at one of the
ends. NO mould pip at the (other) end.
* No idea if this also concerns axles, but recently we have been finding a scary
amount of pieces to be manufactured from that new bio-plastic crap. Does the
surface of those axles feel the same, and do they sound the same?
|
Thanks! The white 32 clearly has LEGO, the yellow one doesn't have it. The
material is the same. Clutch power not tested yet. So the question is: Do all
original 32 axles have the LEGO sign. Main difference is the cross the 32 had
slightly undeeper grooves and the cross is between 0,50- 1 mm thicker.
|
Mine don't have the lego sign. Although they are not as fat looking as yours.
Mine are from 2013 #60004.
|
|
Author: | Erikmax | Posted: | Apr 29, 2021 06:25 | Subject: | Re: Original or coming from Ali? | Viewed: | 43 times | Topic: | Catalog | |
|
| In Catalog, enig writes:
| In Catalog, Erikmax writes:
| I recently bought YELLOW axles 50450 from a dealer on Bricklink offering them
in quantities at a reasonable price.
After arriving I noticed these axles being a bit lighter of colour. Because the
are more colour varieties I wasn't alarmed directly.
But when I looked a bit closer to the axles I also noticed the 'cross'
on the edge of the axle was a bit less sharp. I think normally there is a dimple
at one of the ends- these axes don't have one.
The combination of a quantity offer of this part, the colour difference and the
slightly rougher shape raises some questions.
If it is original: Perfect. If it isn't: How could we stop this? I guess
99% of the customers won't notice.
Or is it simply the end of the premium prices for this sort of parts??
Or place a warning with a clear description of the original?
|
* Do they have similar clutch power to the other axles? This is the first thing
to test. If not, might be an indication that they are indeed fake.
* Newer 32L axles should have ©LEGO and a mould number on them - at one of the
ends. NO mould pip at the (other) end.
* No idea if this also concerns axles, but recently we have been finding a scary
amount of pieces to be manufactured from that new bio-plastic crap. Does the
surface of those axles feel the same, and do they sound the same?
|
Hi
I now also note that the white original LEGO axle has a flat somewhat lower recktangle
place with a dot in the middle on both sides of the end of the axle. The yellow
doesn't have this. But it could be another mold?
|
|
Author: | Erikmax | Posted: | Apr 29, 2021 06:14 | Subject: | Re: Original or coming from Ali? | Viewed: | 59 times | Topic: | Catalog | |
|
| In Catalog, enig writes:
| In Catalog, Erikmax writes:
| I recently bought YELLOW axles 50450 from a dealer on Bricklink offering them
in quantities at a reasonable price.
After arriving I noticed these axles being a bit lighter of colour. Because the
are more colour varieties I wasn't alarmed directly.
But when I looked a bit closer to the axles I also noticed the 'cross'
on the edge of the axle was a bit less sharp. I think normally there is a dimple
at one of the ends- these axes don't have one.
The combination of a quantity offer of this part, the colour difference and the
slightly rougher shape raises some questions.
If it is original: Perfect. If it isn't: How could we stop this? I guess
99% of the customers won't notice.
Or is it simply the end of the premium prices for this sort of parts??
Or place a warning with a clear description of the original?
|
* Do they have similar clutch power to the other axles? This is the first thing
to test. If not, might be an indication that they are indeed fake.
* Newer 32L axles should have ©LEGO and a mould number on them - at one of the
ends. NO mould pip at the (other) end.
* No idea if this also concerns axles, but recently we have been finding a scary
amount of pieces to be manufactured from that new bio-plastic crap. Does the
surface of those axles feel the same, and do they sound the same?
|
Thanks! The white 32 clearly has LEGO, the yellow one doesn't have it. The
material is the same. Clutch power not tested yet. So the question is: Do all
original 32 axles have the LEGO sign. Main difference is the cross the 32 had
slightly undeeper grooves and the cross is between 0,50- 1 mm thicker.
|
|
Author: | enig | Posted: | Apr 29, 2021 05:55 | Subject: | Re: Original or coming from Ali? | Viewed: | 66 times | Topic: | Catalog | |
|
| In Catalog, Erikmax writes:
| I recently bought YELLOW axles 50450 from a dealer on Bricklink offering them
in quantities at a reasonable price.
After arriving I noticed these axles being a bit lighter of colour. Because the
are more colour varieties I wasn't alarmed directly.
But when I looked a bit closer to the axles I also noticed the 'cross'
on the edge of the axle was a bit less sharp. I think normally there is a dimple
at one of the ends- these axes don't have one.
The combination of a quantity offer of this part, the colour difference and the
slightly rougher shape raises some questions.
If it is original: Perfect. If it isn't: How could we stop this? I guess
99% of the customers won't notice.
Or is it simply the end of the premium prices for this sort of parts??
Or place a warning with a clear description of the original?
|
* Do they have similar clutch power to the other axles? This is the first thing
to test. If not, might be an indication that they are indeed fake.
* Newer 32L axles should have ©LEGO and a mould number on them - at one of the
ends. NO mould pip at the (other) end.
* No idea if this also concerns axles, but recently we have been finding a scary
amount of pieces to be manufactured from that new bio-plastic crap. Does the
surface of those axles feel the same, and do they sound the same?
|
|
Author: | Erikmax | Posted: | Apr 29, 2021 05:54 | Subject: | Re: Original or coming from Ali? | Viewed: | 63 times | Topic: | Catalog | |
|
| In Catalog, yorbrick writes:
| I have a couple of used, genuine of the 32 long axles.
They do not have dimples on the ends, they are flat ends. They also appear slightly
lighter than flat yellow parts but this might be an effect of the way light bounces
off them as they are a much smaller flat surface area compared to a tile for
example.
|
I sure won't win the photo competition and I hope it is clear.
Left: shorter yellow axle. Middle: the yellow 32 axle. Right: the white 32 axle.
Although the photo is not the best you can see that the yellow 32 has not ther
sharp cross the other axles have.
|
|
|
Author: | Erikmax | Posted: | Apr 29, 2021 05:38 | Subject: | Re: Original or coming from Ali? | Viewed: | 60 times | Topic: | Catalog | |
|
| In Catalog, yorbrick writes:
| I have a couple of used, genuine of the 32 long axles.
They do not have dimples on the ends, they are flat ends. They also appear slightly
lighter than flat yellow parts but this might be an effect of the way light bounces
off them as they are a much smaller flat surface area compared to a tile for
example.
|
Hi
Colour: I did not compare them with yellow parts, but with the hunderds of yellow
AXLES in different lenght and coming from various sources I have in stock.
The dimple in the black or white axles I have is very tiny.
When I compare the cross of the white and black axle 32 with this of the yellow
ones, it is much sharper.I will try to make a photo.
|
|
Author: | yorbrick | Posted: | Apr 29, 2021 05:23 | Subject: | Re: Original or coming from Ali? | Viewed: | 75 times | Topic: | Catalog | |
|
| I have a couple of used, genuine of the 32 long axles.
They do not have dimples on the ends, they are flat ends. They also appear slightly
lighter than flat yellow parts but this might be an effect of the way light bounces
off them as they are a much smaller flat surface area compared to a tile for
example.
|
Author: | tec | Posted: | Apr 29, 2021 04:51 | Subject: | Re: New Packing Dimensions Feature | Viewed: | 38 times | Topic: | Catalog | |
|
| I bet #Axaday made a stunning 2000 of those 2100 inputs.
I advance his name for a "Dimensions Savant" post.
|
|
Author: | Erikmax | Posted: | Apr 29, 2021 04:50 | Subject: | Original or coming from Ali? | Viewed: | 206 times | Topic: | Catalog | Status: | Open | |
|
| I recently bought YELLOW axles 50450 from a dealer on Bricklink offering them
in quantities at a reasonable price.
After arriving I noticed these axles being a bit lighter of colour. Because the
are more colour varieties I wasn't alarmed directly.
But when I looked a bit closer to the axles I also noticed the 'cross'
on the edge of the axle was a bit less sharp. I think normally there is a dimple
at one of the ends- these axes don't have one.
The combination of a quantity offer of this part, the colour difference and the
slightly rougher shape raises some questions.
If it is original: Perfect. If it isn't: How could we stop this? I guess
99% of the customers won't notice.
Or is it simply the end of the premium prices for this sort of parts??
Or place a warning with a clear description of the original?
|
|
Author: | Emporiosa | Posted: | Apr 28, 2021 20:33 | Subject: | Re: We have a new Inventories Administrator! | Viewed: | 44 times | Topic: | Catalog | |
|
| In Catalog, Turez writes:
Oh my gosh, I love it! The fact that you could easily identify who was who in
that comic is fantastic.
And congratulations Turez!!
|
Author: | MrPetovan | Posted: | Apr 28, 2021 17:06 | Subject: | Re: We have a new Inventories Administrator! | Viewed: | 38 times | Topic: | Catalog | |
|
| Thank you for the link, I wish I could be notified of new comics, so I really
appreciate people linking to it.
In Catalog, Turez writes:
|
Author: | Emilio_Magnelli | Posted: | Apr 28, 2021 15:14 | Subject: | Re: We have a new Inventories Administrator! | Viewed: | 61 times | Topic: | Catalog | |
|
| It' s a real pleasure to welcome Turez
em
|
Author: | Turez | Posted: | Apr 28, 2021 15:06 | Subject: | Re: We have a new Inventories Administrator! | Viewed: | 54 times | Topic: | Catalog | |
|
| Thank you all! |
Author: | peregrinator | Posted: | Apr 28, 2021 08:40 | Subject: | Re: We have a new Inventories Administrator! | Viewed: | 56 times | Topic: | Catalog | |
|
| Congrats Turez!
In Catalog, Admin_Russell writes:
|
Author: | SylvainLS | Posted: | Apr 28, 2021 08:06 | Subject: | Re: We have a new Inventories Administrator! | Viewed: | 56 times | Topic: | Catalog | |
|
| Congrats Turez! |
Author: | cosmicray | Posted: | Apr 28, 2021 06:45 | Subject: | Re: We have a new Inventories Administrator! | Viewed: | 40 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
Welcome, and we hope your involvement will be one of great accomplishment !
Nita Rae
|
|
Author: | axaday | Posted: | Apr 28, 2021 05:42 | Subject: | Re: We have a new Inventories Administrator! | Viewed: | 50 times | Topic: | Catalog | |
|
| A very good selection.
In Catalog, Admin_Russell writes:
|
|
Author: | Stellar | Posted: | Apr 28, 2021 05:18 | Subject: | Re: We have a new Inventories Administrator! | Viewed: | 41 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
Congratulations @Turez!
Hope the best for you in your position
Good to see you in the Admins page, even thought seems it was not updated completely.
|
|
Author: | Stuart9 | Posted: | Apr 28, 2021 04:48 | Subject: | Re: We have a new Inventories Administrator! | Viewed: | 40 times | Topic: | Catalog | |
|
| Nice one, congratulations and thank you.
In Catalog, Admin_Russell writes:
|
|
Author: | infinibrix | Posted: | Apr 28, 2021 03:56 | Subject: | Re: We have a new Inventories Administrator! | Viewed: | 50 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
Congrats, keep up the good work and contributions!
|
|
Author: | Brickwilbo | Posted: | Apr 28, 2021 02:13 | Subject: | Re: We have a new Inventories Administrator! | Viewed: | 47 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
Congratulations Turez.
|
|
Author: | brickerking | Posted: | Apr 28, 2021 00:31 | Subject: | Re: Changes involving the CEP | Viewed: | 69 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes
| We are sad to inform you that our Catalog Adminstrator StormChaser is no longer
part of the Community Expert Program.
|
Not sure why anyone is surprised about this. There was a big catalog dump that
was largely stormchaser’s baby and it was mostly cancelled at the last minute.
Was he frustrated, probably. Is this the first time he has left BL, no. This
might not be the last we see of stormchaser. He had big ambitions, but it looks
like he wasn’t given the freedom to execute his vision. Maybe BL was right to
not make too many catalog changes at once, but maybe not... Either way, when
you get paid to do a job, it’s important to do your best within the parameters
of that job. I’m just guessing, but I think he was just ahead of his time at
BL. All the best!
|
|
Author: | jennnifer | Posted: | Apr 28, 2021 00:21 | Subject: | Re: We have a new Inventories Administrator! | Viewed: | 51 times | Topic: | Catalog | |
|
| Welcome and thanks for stepping up!
Jen
|
Author: | atkk | Posted: | Apr 27, 2021 21:57 | Subject: | Re: We have a new Inventories Administrator! | Viewed: | 39 times | Topic: | Catalog | |
|
| Congrats Turez!!
In Catalog, Admin_Russell writes:
|
|
Author: | DeLuca | Posted: | Apr 27, 2021 21:56 | Subject: | Re: Looney Tunes Martian without cloth? | Viewed: | 38 times | Topic: | Catalog | |
|
| In Catalog, tEoS writes:
| My Martian did not come with the cloth piece. Did this happen to anyone else?
[s=coltun-10]
|
Did you check the packet throughly? Sometimes cloth elements can stick to the
inside of the bag or get caught in a corner.
|
Author: | MrPetovan | Posted: | Apr 27, 2021 21:52 | Subject: | Re: We have a new Inventories Administrator! | Viewed: | 34 times | Topic: | Catalog | |
|
| Congrats on the nomination! |
Author: | SezaR | Posted: | Apr 27, 2021 21:45 | Subject: | Re: We have a new Inventories Administrator! | Viewed: | 35 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
Congradz Jonas
|
|
Author: | DPB | Posted: | Apr 27, 2021 21:35 | Subject: | Re: We have a new Inventories Administrator! | Viewed: | 33 times | Topic: | Catalog | |
|
| Congratulations Turez! It can only get better with you onboard!! DPB |
Author: | jbo210 | Posted: | Apr 27, 2021 21:31 | Subject: | Re: We have a new Inventories Administrator! | Viewed: | 36 times | Topic: | Catalog | |
|
| Congratulations Turez! Glad to have you on the BL team! Thank you to all the
Admins for keeping BL alive and thriving!
|
|
Author: | tEoS | Posted: | Apr 27, 2021 19:53 | Subject: | Looney Tunes Martian without cloth? | Viewed: | 101 times | Topic: | Catalog | Status: | Open | |
|
| My Martian did not come with the cloth piece. Did this happen to anyone else?
[s=coltun-10]
|
Author: | qwertyboy | Posted: | Apr 27, 2021 11:45 | Subject: | Re: New Packing Dimensions Feature | Viewed: | 37 times | Topic: | Catalog | |
|
| In Catalog, axaday writes:
| In Catalog, randyf writes:
| That graph shows everything. The tool was needed, and it was needed long before
Instant Checkout should have ever gone live. Better late than never, but the
new tool is obviously a success and will help fill in the data for IC quickly.
|
The tool depicted in that graph was me.
|
Obviously a pretty sharp tool.
Niek.
|
|
Author: | axaday | Posted: | Apr 27, 2021 11:41 | Subject: | Re: New Packing Dimensions Feature | Viewed: | 32 times | Topic: | Catalog | |
|
| In Catalog, randyf writes:
| In Catalog, Admin_Russell writes:
| I'd also like to include a little chart showing the effect of releasing this
tool (see Image 3). And we still have 4 more days to go in April.
|
That graph shows everything. The tool was needed, and it was needed long before
Instant Checkout should have ever gone live. Better late than never, but the
new tool is obviously a success and will help fill in the data for IC quickly.
|
The tool depicted in that graph was me.
|
|
Author: | randyf | Posted: | Apr 27, 2021 11:39 | Subject: | Re: New Packing Dimensions Feature | Viewed: | 32 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| I'd also like to include a little chart showing the effect of releasing this
tool (see Image 3). And we still have 4 more days to go in April.
|
That graph shows everything. The tool was needed, and it was needed long before
Instant Checkout should have ever gone live. Better late than never, but the
new tool is obviously a success and will help fill in the data for IC quickly.
|
|
Author: | axaday | Posted: | Apr 27, 2021 10:03 | Subject: | Re: New Packing Dimensions Feature | Viewed: | 43 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| In Catalog, Admin_Russell writes:
| We are pleased to announce that a major new feature was deployed to the catalog
today - Packing Dimensions!
|
Today the last bug was fixed for the new Packing Dimensions Project, Phase 1.
Contributors may now use the question mark link on the catalog detail page to
quickly and easily submit a missing Packaging Dimension (see Image 1).
If the question mark isn't working as a link, it's not a bug - just go
to your Catalog Settings page and check the box (see Image 2):
Show Links to Add Weight and Dimensions
...and be sure to save your settings.
A full 7 months before the April 6 release of this feature, on Sep 6 of last
year I opened a new Forum Topic called Packing Dimensions X, to make it easier
to handle the large backlog of requests that had built up earlier in the year.
When I opened the topic, I actually asked people NOT to contribute except when
necessary:
https://www.bricklink.com/message.asp?ID=1220218
As a matter of consideration, please don't add dimensions for parts with
every side under 20mm.
And then on Oct 6, I asked for the following:
https://www.bricklink.com/message.asp?ID=1225859
...until we get a tool that goes through the normal approval channels (which
is coming in the next few weeks), please do not submit measurements for an entire
set of [300] decorated parts...
However, now that the tool is ready to use, I would like to officially remove
all restrictions from submitting Packing Dimensions. We are planning to open
up some other forms and give you some handy filters to find missing dimensions
- this will be in Phases 2 and 3. But for now, the paved road is finally open,
so drive on through!
I'd also like to include a little chart showing the effect of releasing this
tool (see Image 3). And we still have 4 more days to go in April.
|
I saw the blue ? before I saw the forum post. That should speed things up.
|
|
Author: | Admin_Russell | Posted: | Apr 27, 2021 00:57 | Subject: | Re: New Packing Dimensions Feature | Viewed: | 105 times | Topic: | Catalog | |
|
|
BrickLink ID CardAdmin_Russell
|
Location: USA, California |
Member Since |
Contact |
Type |
Status |
May 9, 2017 |
|
Admin |
|
|
BrickLink Administrator |
|
| In Catalog, Admin_Russell writes:
| We are pleased to announce that a major new feature was deployed to the catalog
today - Packing Dimensions!
|
Today the last bug was fixed for the new Packing Dimensions Project, Phase 1.
Contributors may now use the question mark link on the catalog detail page to
quickly and easily submit a missing Packaging Dimension (see Image 1).
If the question mark isn't working as a link, it's not a bug - just go
to your Catalog Settings page and check the box (see Image 2):
Show Links to Add Weight and Dimensions
...and be sure to save your settings.
A full 7 months before the April 6 release of this feature, on Sep 6 of last
year I opened a new Forum Topic called Packing Dimensions X, to make it easier
to handle the large backlog of requests that had built up earlier in the year.
When I opened the topic, I actually asked people NOT to contribute except when
necessary:
https://www.bricklink.com/message.asp?ID=1220218
As a matter of consideration, please don't add dimensions for parts with
every side under 20mm.
And then on Oct 6, I asked for the following:
https://www.bricklink.com/message.asp?ID=1225859
...until we get a tool that goes through the normal approval channels (which
is coming in the next few weeks), please do not submit measurements for an entire
set of [300] decorated parts...
However, now that the tool is ready to use, I would like to officially remove
all restrictions from submitting Packing Dimensions. We are planning to open
up some other forms and give you some handy filters to find missing dimensions
- this will be in Phases 2 and 3. But for now, the paved road is finally open,
so drive on through!
I'd also like to include a little chart showing the effect of releasing this
tool (see Image 3). And we still have 4 more days to go in April.
|
|
|
|
Author: | steverus | Posted: | Apr 25, 2021 11:14 | Subject: | Please add alternative item to 3626bpb0783 | Viewed: | 38 times | Topic: | Catalog | Status: | Open | |
|
| Hi
Please can you add a hollow stud version of 3626bpb0783. Thank you
|
Author: | yorbrick | Posted: | Apr 25, 2021 02:51 | Subject: | Re: Multipack | Viewed: | 29 times | Topic: | Catalog | |
|
| In Catalog, The_RealRedHex writes:
| Part
has a note displaying what sets it is in, however the catalogue states it doesn't
show in any sets. I was thinking of adding them as alternates to the sets but
thought I should get others opinions first. Should I add it as an Alternate,
Counterpart, Regular or Extra?
Regards,
Theo - The_RealRedHex
|
They are already in the inventory, as regular and extra parts. This is similar
to other parts that come in card boxes to protect them.
|
|
Author: | Hexy | Posted: | Apr 24, 2021 19:56 | Subject: | Multipack | Viewed: | 79 times | Topic: | Catalog | Status: | Open | |
|
| Part
has a note displaying what sets it is in, however the catalogue states it doesn't
show in any sets. I was thinking of adding them as alternates to the sets but
thought I should get others opinions first. Should I add it as an Alternate,
Counterpart, Regular or Extra?
Regards,
Theo - The_RealRedHex
|
Author: | runner.caller | Posted: | Apr 23, 2021 23:17 | Subject: | lol, snarling | Viewed: | 147 times | Topic: | Catalog | Status: | Open | |
|
| I've trained myself to search lopsided, and smirk, but this is the first
I've seen "snarling" haha.
|
Author: | Jabbz | Posted: | Apr 23, 2021 09:38 | Subject: | Re: Misprint or am I being silly? | Viewed: | 61 times | Topic: | Catalog | |
|
| | This will be worth more, as it is a nice one that can also be used for variation
and not just curiousity. Did you get it in a set, or in a lot?
|
I got it in a bundle of parts from eBay.
|
|
Author: | yorbrick | Posted: | Apr 23, 2021 09:33 | Subject: | Re: Misprint or am I being silly? | Viewed: | 38 times | Topic: | Catalog | |
|
| In Catalog, Jabbz writes:
| In Catalog, 00Mera00 writes:
| Looks like a misprint to me! put it in a safe box, lock it up and cherish it
forever! it's a nice one
|
WOW!
Are misprints even worth anything on top of the original value? I know some people
like to collect them.
|
This will be worth more, as it is a nice one that can also be used for variation
and not just curiousity. Did you get it in a set, or in a lot? I think one of
the Chinese sellers that do missing print / bad print parts was selling that
one a few years ago. I bought a lot of LOTR parts that were missing paint from
them but didn't really pay too much attention to the SW parts. I remember
that they had a lot of partially printed ewok heads.
|
|
Author: | Jabbz | Posted: | Apr 23, 2021 09:00 | Subject: | Re: Misprint or am I being silly? | Viewed: | 44 times | Topic: | Catalog | |
|
| In Catalog, 00Mera00 writes:
| Very collectable from what i've seen and most if not all have higher values
because of it, i don't collect them specifically but we've had a few
come through our way and i have them all bagged in a draw, like my little treasure
box, my fave so far is Theoden's armour, the printing is on the back instead
of the front, always nice to get something a little more quirky.
|
I'm not a huge SW fan so I don't think I'll keep it, I think there
are others who will treasure it more than me!
|
Author: | Jabbz | Posted: | Apr 23, 2021 08:59 | Subject: | Re: Misprint or am I being silly? | Viewed: | 40 times | Topic: | Catalog | |
|
| In Catalog, grimsbricksuk writes:
Thanks
|
Author: | grimsbricksuk | Posted: | Apr 23, 2021 08:58 | Subject: | Re: Misprint or am I being silly? | Viewed: | 45 times | Topic: | Catalog | |
|
| https://www.facebook.com/groups/608494213243712/?ref=share
In Catalog, Jabbz writes:
| In Catalog, grimsbricksuk writes:
| Definitely a misprint & a pretty good one.
There’s a group on Facebook that specialises in misprinted minifigs if you’re
looking to sell it.
|
Could you provide a link or name of that group please? Thanks
|
|
|
Author: | 00Mera00 | Posted: | Apr 23, 2021 08:57 | Subject: | Re: Misprint or am I being silly? | Viewed: | 41 times | Topic: | Catalog | |
|
| Very collectable from what i've seen and most if not all have higher values
because of it, i don't collect them specifically but we've had a few
come through our way and i have them all bagged in a draw, like my little treasure
box, my fave so far is Theoden's armour, the printing is on the back instead
of the front, always nice to get something a little more quirky.
|
|
Author: | Jabbz | Posted: | Apr 23, 2021 08:52 | Subject: | Re: Misprint or am I being silly? | Viewed: | 40 times | Topic: | Catalog | |
|
| In Catalog, grimsbricksuk writes:
| Definitely a misprint & a pretty good one.
There’s a group on Facebook that specialises in misprinted minifigs if you’re
looking to sell it.
|
Could you provide a link or name of that group please? Thanks
|
|
Author: | grimsbricksuk | Posted: | Apr 23, 2021 08:50 | Subject: | Re: Misprint or am I being silly? | Viewed: | 41 times | Topic: | Catalog | |
|
| Definitely a misprint & a pretty good one.
There’s a group on Facebook that specialises in misprinted minifigs if you’re
looking to sell it.
In Catalog, Jabbz writes:
| Hi all,
I recently came across this Jar Jar Binks head (pictured on the right) and I
can't seem to identify it on BL. It is not like any of the three variants
of the mold. I think it could be misprint of 92743pb03 (which is pictured on
the left).
If I am horribly wrong please point me in the right direction! My Star Wars knowledge
is not the best!
Thanks
|
|
|
Author: | Jabbz | Posted: | Apr 23, 2021 08:49 | Subject: | Re: Misprint or am I being silly? | Viewed: | 42 times | Topic: | Catalog | |
|
| In Catalog, 00Mera00 writes:
| Looks like a misprint to me! put it in a safe box, lock it up and cherish it
forever! it's a nice one
|
WOW!
Are misprints even worth anything on top of the original value? I know some people
like to collect them.
|
Author: | 00Mera00 | Posted: | Apr 23, 2021 08:47 | Subject: | Re: Misprint or am I being silly? | Viewed: | 47 times | Topic: | Catalog | |
|
| Looks like a misprint to me! put it in a safe box, lock it up and cherish it
forever! it's a nice one
|
Author: | Jabbz | Posted: | Apr 23, 2021 07:33 | Subject: | Misprint or am I being silly? | Viewed: | 225 times | Topic: | Catalog | Status: | Open | |
|
| Hi all,
I recently came across this Jar Jar Binks head (pictured on the right) and I
can't seem to identify it on BL. It is not like any of the three variants
of the mold. I think it could be misprint of 92743pb03 (which is pictured on
the left).
If I am horribly wrong please point me in the right direction! My Star Wars knowledge
is not the best!
Thanks
|
|
|
|
Author: | grimsbricksuk | Posted: | Apr 22, 2021 12:17 | Subject: | Re: Sw1144 yoda | Viewed: | 30 times | Topic: | Catalog | |
|
| Ooops yes I’d forgotten about sw1146 pending as Blue Milk Luke, ok my bad.
But why was Yoda changed to sw1147, surely sw1144 was perfectly fine?
In Catalog, randyf writes:
| In Catalog, randyf writes:
| In Catalog, grimsbricksuk writes:
| I’d like to know why they changed it to sw1147? What was wrong with sw1144?
Poe (sw0737a) is now sw1145 but what happened sw1146?
|
is still pending because it hasn't been officially released. The LEGO Star
Wars game has been delayed once again until later this year.
|
And you were the one who submitted it to the catalog, so you should know, right?
|
|
|
Author: | grimsbricksuk | Posted: | Apr 22, 2021 12:15 | Subject: | Re: sw1145 Poe & sw1147 Yoda | Viewed: | 33 times | Topic: | Catalog | |
|
| Ok so I had sw1146 pending as Blue Milk Luke (totally forgotten about), which
I’ve now deleted as it’s never going to be released at this rate.
Still need no idea why the two figs changed codes though?
In Catalog, grimsbricksuk writes:
| What happened to Star Wars minifig codes sw1144 & sw1146? Are we just skipping
numbers now, as neither of them exist!
I don’t get why Yoda was changed from sw1144 to sw1145 for no apparent reason?
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|