Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies |
| Author: | BlackbirdToys  | | Posted: | Apr 18, 2021 00:49 | | Subject: | Looney Tunes minifigures | | Viewed: | 133 times | | Topic: | Catalog | | Status: | Open | |
|
| Is it just me, I can't find the new Looney Tunes minifigures in the catalog.
Are they listed ?
|
| Author: | Royroy | | Posted: | Apr 17, 2021 13:21 | | Subject: | BSX file of all SW minifigures? | | Viewed: | 61 times | | Topic: | Catalog | | Status: | Open | |
|
| Does anybody have a bsx or other usable file with all the SW Minifigures that
she/he woulnd't mind sharing?
It would save me some boring work 
Have a nice evening!
|
|
| Author: | heomin61 | | Posted: | Apr 15, 2021 10:49 | | Subject: | Minecraft Water Animal should be minifigures | | Viewed: | 63 times | | Topic: | Catalog | | Status: | Open | |
|
| In CatalogueList Animal, Water (https://www.bricklink.com/catalogList.asp?catType=P&catString=145
), there are several minecraft animals, such as minedolphin01, mineguardian01,
mineguardian02, mineturtle1, but they have different characteristics from parts,
that is, they are some kind of minifigures not parts.
Almost all the part are inseparable, but the minecraft water animals are built
from several bricks. The item description says they are appeared in some sets
(for example, the mineturtle1 is appeared in 21152-1), but they are not in the
sets, only the parts of the animal appears. I think that is not good for inventory
management.
In case of minecraft iron golem (min082, min093), they are minifigures, not parts.
I think the two groups is very similar in nature. So all of the minecraft water
animals should be moved from parts to minifigures. Then, the minecraft sets management
will be more consistent, I believe.
Thank you for reading.
Min
|
|
| Author: | goldknight | | Posted: | Apr 14, 2021 18:27 | | Subject: | Sw1144 yoda | | Viewed: | 101 times | | Topic: | Catalog | | Status: | Open | |
|
| This yoda is from the atlas book that I just received. The yoda is in a clamshell
in front of the book with a camera, walking stick, map, and backpack. The yoda
was assembled already. My question is that I see the picture of sw1144 with the
backpack on but it was not assembled that way on the clamshell—do we need another
picture of yoda without backpack or just let it be?
|
|
| Author: | alex10552 | | Posted: | Apr 13, 2021 18:02 | | Subject: | Adding items to BrickLink's inventory | | Viewed: | 102 times | | Topic: | Catalog | | Status: | Open | |
|
| I have several unique pieces with stickers on them that are not in BrickLink's
inventory catalog. One is from a Moana set, and also 4 different parts belonging
to the Death Star Final Duel II (Star Wars) set. The Final Duel set currently
has zero parts with stickers in its inventory. This definitely needs an update.
I've never submitted items to be added myself, and so I'm pretty unfamiliar
with the process. How can I get these parts added into the system? Thank you.
|
|
| Author: | roguemjr | | Posted: | Apr 13, 2021 12:50 | | Subject: | Set 911-1 shows incorrect turntable | | Viewed: | 74 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello,
I was thrilled when my parts for 911-1 showed up to once again build my first
LEGO set. However, the turn table listed in the part list for this set on Brickling
is incorrect.
Current part: Item No: 3403c01 - Turntable 4 x 4 Square Base with Same Color
Turntable 4 x 4 Top (3403 / 3404)
Correct part: Item No: 3404ac01 - Turntable 4 x 4 Complete, Faceted
See attached instructions for correct part verification.
Thanks,
Michael
roguemjr
Madstone's Emporium
|
|
|
| Author: | MarcHatSteine | | Posted: | Apr 13, 2021 12:39 | | Subject: | Plate 6x8 Light Blue Gray wrong color image | | Viewed: | 81 times | | Topic: | Catalog | | Status: | Open | |
|
| I don't know if this is the right place to post this - if not, please tell
me where I should direct it to. I just noticed that the color of Plate 6 x 8
in Light Bluish Gray is way off from all the other Light Bluish Gray color images.
To me it almost looks like a Dark Gray. Is there a reason for that? because most
of the other plate images are consistent in color.
|
|
|
| Author: | sskryten | | Posted: | Apr 13, 2021 10:56 | | Subject: | Adding more details to a page | | Viewed: | 59 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi everyone.
I am a new member and whilst searching for items I have come across a few items
that need editing or more details added to them.
How can I edit or supply more details??
An example is item min093, says it is found in set 21132 which is incorrect.
It appears in sets 21123 and 21128
Steve
|
|
| Author: | normann1974 | | Posted: | Apr 13, 2021 10:48 | | Subject: | Inventory for gear 40315 | | Viewed: | 68 times | | Topic: | Catalog | | Status: | Open | |
|
| I've just added inventory for [G=40315]. Apparently, it has been missing
since 2018. I have few notes:
1) I can not offer to submit a picture of the assembled set as I need the parts
in condition "new". Instead, I'll submit photo of the sealed (poly)bags and
their contents sorted roughly by the steps in the instructions.
2) This gear has an "instructions" entry, but my set had no instructions in the
bag. Is this the correct way to handle this situation?
3) Do you need the three goal paper figures created as individual gear and added
as counterparts?
/Jan
|
|
|
| Author: | Tollo | | Posted: | Apr 13, 2021 10:40 | | Subject: | 9355 instruction | | Viewed: | 56 times | | Topic: | Catalog | | Status: | Open | |
|
| Good evening.
There someone that has instruction for SET 9355 or/and some photos, in order
to understan better HOW TO MAKE IT?
thanks in advance for who can HELP me
Tollo
|
| Author: | Stuart9 | | Posted: | Apr 10, 2021 15:10 | | Subject: | Marbled versions of earliest baseplate bb0340 | | Viewed: | 98 times | | Topic: | Catalog | | Status: | Open | |
|
| Thought I'd ask if there is any point trying to add images of these to the
catalogue or does the marbling and the block rule them out ?
Thanks in advance.
Stuart
|
|
| Author: | Creative_Brick | | Posted: | Apr 10, 2021 01:19 | | Subject: | Shipping Cost Seems High | | Viewed: | 180 times | | Topic: | Catalog | | Status: | Open | |
|
| I put in an order with a seller for a minifigure keychain and was invoiced $9.00
for shipping. While I understand some shops have fees and some will charge extra
for not meeting a big enough buy or lot limit, the seller specifically listed
in his T&C that he has no fees and there were no lot limits or minimum buys listed
anywhere in his shop. I've never had anyone quote me this high a price on
shipping, especially when the seller lives in the same state that I do. Does
this seem like a reasonable shipping cost? Should I try messaging the seller?
Is there a way I can cancel the order?
|
|
| Author: | CamelCityBH | | Posted: | Apr 9, 2021 22:25 | | Subject: | 33299 vs 61408 | | Viewed: | 70 times | | Topic: | Catalog | | Status: | Open | |
|
| While adding inventory this evening, I found that the pictures shown for 33299
and 61408 seem to be reversed. I have a lot of both in multiple colors. The
items that match the images for 61408 clearly show "33299" inside a circle on
one face. The items that match the images for 33299 do not have a part number
visible anywhere. We checked approximately 50 of each.
Is it possible that someone submitted the images wrong?
|
| Author: | legomaster100 | | Posted: | Apr 7, 2021 21:41 | | Subject: | how to add parts from rebrickable | | Viewed: | 57 times | | Topic: | Catalog | | Status: | Open | |
|
| For set 21326 winnie the pooh, parts list is available in rebrickable and not
bricklink.
Can I add it to bricklink somehow??
Thanks
-Brick Llama
|
| Author: | tpr | | Posted: | Apr 7, 2021 14:53 | | Subject: | Chrome Silver Legs - confirmation | | Viewed: | 111 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi
Can anyone confirm the base colour of the Hips and Legs that are Chrome Silver
Thanks
tpr
|
| Author: | razorflan | | Posted: | Apr 6, 2021 14:28 | | Subject: | Sticker part 2335pb164 sticker orientation | | Viewed: | 54 times | | Topic: | Catalog | | Status: | Open | |
|
| Set 70906 part 2335pb164 the sticker in the image for this part is applied incorectly.
Just check the image for set 70906 clips are at the top 'bang' 😲
|
|
|
| Author: | Admin_Russell | | Posted: | Apr 6, 2021 01:30 | | Subject: | New Packing Dimensions Feature | | Viewed: | 321 times | | Topic: | Catalog | | Status: | Open | |
|
|
BrickLink
ID CardAdmin_Russell
|
Location:  USA, California |
| Member Since |
Contact |
Type |
Status |
| May 9, 2017 |
 |
Admin |
|
|
| BrickLink Administrator |
|
| We are pleased to announce that a major new feature was deployed to the catalog
today - Packing Dimensions!
We started a Packaging Dimensions Topic in the Forum in the Fall of 2017 so that
members could input dimensions to help Instant Checkout work properly. It was
only supposed to be a temporary solution, and it took a lot of time and dedication
for both contributors and admins to handle each request manually.
Now there is much better way - just input the data like you would any other catalog
data. Notice the upgrade to the Change Item form:
https://www.bricklink.com/catalogReq.asp?itemType=P
The first thing, though, that we want to tell you about this new feature is that
it's only a start. This is actually just phase 1 out of 3 phases. We did
it this way so we could get the basic functionality opened up as soon as possible.
This means that the Add Item form does not have Packing Dimensions input fields,
and we haven't touched the seller interface either which still shows millimeters
and only allows the upload of custom dimensions.
We are also a bit behind on the new Help Page:
https://www.bricklink.com/help.asp?helpID=2510
There are 4 areas we still need to tackle with the Help Page: Minifigures, Gear,
Books, and Catalogs. Those sections will be filled out over the next few days.
If you could please hold off on uploading dimensions for those Item Types until
the Help Pages are finished, it would be appreciated.
As you may have noticed, we changed the name from Packaging Dimensions to Packing
Dimensions. Let us know what you think and of course report any bugs. And there
is no need to post in the Packaging Dimensions Topic any more. We'll keep
it there for a while in case something happens to our new system, but when we
wrap up with phase 3, we will officially decommission that part of the Forum.
|
|
|
|
| Author: | roguemjr | | Posted: | Apr 4, 2021 01:46 | | Subject: | New entry??? | | Viewed: | 75 times | | Topic: | Catalog | | Status: | Open | |
|
| To whom it may concern:
Is it possible to create an assembly for the attached 1x6 yellow brick with driver
side sticker from set 5510-1? I see there is another assembly for another sticker
for this part. Or how should I list this part to found by people who may be
looking for it.
Thanks,
roguemjr
|
|
|
| Author: | Ddriver | | Posted: | Apr 3, 2021 02:53 | | Subject: | tls095 Lego Employee, Kidsfest 2013 | | Viewed: | 84 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello,
On the article page of "TLS095 LEGO EMPLOYEE, MALE WITH Apron, Lego Store at
Kidsfest 2013" is a wrong picture where the Minifigur shows in the blister.
The picture with blister is from the "Creativity Tour 2014" and not from the
Kids Festival 2013.
The right picture is attached here.
Where can I report that because the user who does make the changes on the page
can not be notified by mail, as this user has blocked the mail?
Best regards Daniel.
|
|
|
|
| Author: | Hexy | | Posted: | Apr 1, 2021 05:08 | | Subject: | Set numbers in Part Titles | | Viewed: | 62 times | | Topic: | Catalog | | Status: | Open | |
|
| There are a lot of stickered or printed part stating the set the come from
at the end of the name, for example
At what number does it become unsuitable to put several sets in the name.
I've seen some with 2 but rarely any with 3. Also, does anyone have an opinion
if they should stay or be removed? Because I would much rather a cleaner, simple
title. It is annoying that some don't have this in their title, even if they
only have 1 or 2 sets.
Regards,
Theo - The_RealRedHex
|
|
| Author: | StormChaser | | Posted: | Apr 1, 2021 04:59 | | Subject: | Items Moved Today | | Viewed: | 199 times | | Topic: | Catalog | | Status: | Open | |
|
| Everything on this list has been moved except for the last two items:
https://www.bricklink.com/help.asp?helpID=2487
We ran into a brief hiccup with those item type changes, but we plan to get them
moved later today. Let us know if you see anything on the list we missed.
As some of you already noticed, the list of moved items is about 1/9th the proposed
size. For a variety of reasons, we weren't able to accomplish the other
changes. This does not necessarily mean they won't happen, but merely that
they aren't happening right now.
For our October 1st, 2021 list, we're doing things differently to reduce
confusion. We'll post a page for that soon and begin listing items between
now and then. We'll lock it down on September 1st and every single item
placed on the October 1st page will be moved.
For anyone wondering about this process, our goal was to reduce confusion about
where things belong in the catalog. The project consisted of two steps:
1. Define in writing what should be in each category.
2. Move parts as necessary to conform with written definitions.
We've completed step one, for the most part (although it's still being
tweaked here and there). Now we're working (slowly) through step two.
Let us know if you have any questions or comments.
|
|
| Author: | moreshelfspace | | Posted: | Mar 31, 2021 21:10 | | Subject: | 970c00pb0364 description color | | Viewed: | 41 times | | Topic: | Catalog | | Status: | Open | |
|
| The description for Wonder Woman's legs says they are white markings, but
the piece I have's paint is silver, not white. (So neither a search for "white"
or "boots" turn up any results for the piece)
|
|
| Author: | cosmicray | | Posted: | Mar 31, 2021 14:23 | | Subject: | Dimensions of tires | | Viewed: | 57 times | | Topic: | Catalog | | Status: | Open | |
|
| I would like to provide a Catalog dimension for
Plus the various part assemblies that include that tire. The change page suggests
that the numbers are in studs. Is this correct, or should I be entering in cm
?
According to my caliper the tire really does measure 30 x 30 x 14 mm.
When entering the dimensions for the assemblies, do I do that with the wheel
inserted in the tire, or with them side by side ? example
Nita Rae
|
|
| Author: | SurplusParts | | Posted: | Mar 31, 2021 07:12 | | Subject: | where does this go in the catologue? | | Viewed: | 85 times | | Topic: | Catalog | | Status: | Open | |
|
| I have this poster that i received with the VIP program from Lego when i purchased
the new Ghostbustern ECTO-1.
I wasn't sure where it goes in the catalogue. I looked in Gear osters for
it. I wasn't sure if that is where it goes?
If yes, i am happy to add to the catalogue if it is not already there.
Thanks
|
|
|
| Author: | tons_of_bricks | | Posted: | Mar 30, 2021 10:38 | | Subject: | Why so few changes approved? | | Viewed: | 122 times | | Topic: | Catalog | | Status: | Open | |
|
| Since it was only a couple days before April 1st, we decided to start organizing
the pieces by the new changes that were going to be done April 1st. https://www.bricklink.com/help.asp?helpID=2487
Now today, I notice that a ton of them say not approved, including many that
made sense. So is there a reason?
|
|
| Author: | skvely | | Posted: | Mar 29, 2021 22:37 | | Subject: | Super Heroes | | Viewed: | 52 times | | Topic: | Catalog | | Status: | Open | |
|
| Forgive me if this has been asked before, but why do "Batman I" and "Spider-Man"
get their own top-level categories under Set, when all similar categories are
under "Super Heroes" (including another "Spider-Man", I assume another generation)?
"DC Super Hero Girls" is also a top-level category. I understand that more since
it uses the minidolls instead of minifigures, but I would still consider it Super
Heroes.
Also, it bothers me that "Super Heroes" isn't subdivided into "Marvel" and
"DC" (the categories "Buildable Figures", "Sculptures", "Mighty Micros", and
"Super Heroes Other" could also be at that level to avoid fracturing things too
much).
|
|
| Author: | paulvdb | | Posted: | Mar 29, 2021 13:48 | | Subject: | Image requested for set 40443-1 sticker sheet | | Viewed: | 47 times | | Topic: | Catalog | | Status: | Open | |
|
|
The person who submitted the pending inventory for this set did not take a photo
of the sticker sheet before using it. So I would appreciate if anyone who has
an unused sticker sheet can supply an image for it.
|
| Author: | StormChaser | | Posted: | Mar 29, 2021 11:25 | | Subject: | Our First Additional Note Link | | Viewed: | 138 times | | Topic: | Catalog | | Status: | Open | |
|
| Today we added our first link to another website in an additional note:
Thought that was kinda cool and worth sharing.
|
| Author: | Zab3uk75 | | Posted: | Mar 26, 2021 11:26 | | Subject: | category changes | | Viewed: | 58 times | | Topic: | Catalog | | Status: | Open | |
|
| Where will I find a list of category changes, past and up coming ?1st April
Thanks for your help.
June
|
| Author: | Borat_Sagdiyev | | Posted: | Mar 24, 2021 16:21 | | Subject: | I can't see the character... | | Viewed: | 122 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello! I would like to add this minifigure to my inventory, but I don't see
him on the Bricklink catalog. Please, help me! Thank you in advance!
Best wishes,
Dan
|
|
|
| Author: | normann1974 | | Posted: | Mar 24, 2021 10:45 | | Subject: | Shock absorber spring type | | Viewed: | 100 times | | Topic: | Catalog | | Status: | Open | |
|
| I'm currently double checking these shock absorbers in my store and I'm
very much in doubt about some of them. I seem to have three different spring
sizes (see image), but BL requires them to be either "soft" or "normal". So
I guess the ones on the left are "soft" and the ones on the right are "normal",
but what about the ones in the middle? Juding by the number of winds visible
they seems to be somewhere in between.
Help is appreciated.
/Jan
|
|
|
| Author: | terra85td | | Posted: | Mar 24, 2021 06:14 | | Subject: | 3070a, 3070b, 3069a, 3069b, 3068a, 3068b | | Viewed: | 62 times | | Topic: | Catalog | | Status: | Open | |
|
| good morning,
all the original pieces 3070a, 3070b, 3069a, 3069b, 3068a, 3068b have the lego
logo on the back?
I have a doubt especially on 1x1
THANKS
DANIELE
|
| Author: | Thargor | | Posted: | Mar 24, 2021 04:44 | | Subject: | Minifigure sw0737a | | Viewed: | 102 times | | Topic: | Catalog | | Status: | Open | |
|
| I just saw that Minifigure sw0737a Poe Dameron was added to the catalog. This
Minifigure is included in set 75149 and comes with helmet and hair piece.
In the past we often had Minifigures that had both helmet and hair piece but
they were only listed once in the catalog e.g. sw0416, sw0772, sw0407 ...
Why is Poe now listed twice as sw0737 with hair and as sw0737a with helmet?
|
|
| Author: | normann1974 | | Posted: | Mar 22, 2021 19:57 | | Subject: | 3003pb004 sticker too large | | Viewed: | 89 times | | Topic: | Catalog | | Status: | Open | |
|
| I'm sitting with something that looks like part in my hands.
The sticker on these bricks is clearly too large to fit on one brick. So does
this sticker exist in different sizes or is the current part image showing a
cut sticker? Should this part be retired and an assembly be made instead?
Note that I've found parts [P=3068bp65] and in the same lot
of bricks, so I'd say there's virtually no chance that the stove sticker
didn't come from set .
/Jan
|
|
|
| Author: | normann1974 | | Posted: | Mar 22, 2021 19:11 | | Subject: | FTBushH in all plastic? | | Viewed: | 73 times | | Topic: | Catalog | | Status: | Open | |
|
| I seem to remember that this part is part metal (bush) and part plastic (base).
This one, though, feels like it's all plastic. Is it the same part as the
metal ones?
/Jan
|
|
| Author: | jviney | | Posted: | Mar 20, 2021 16:31 | | Subject: | complete Lego catalog | | Viewed: | 110 times | | Topic: | Catalog | | Status: | Open | |
|
| | Is there a complete catalog that can be printed out? |
| Author: | C0lsanders_ | | Posted: | Mar 19, 2021 21:47 | | Subject: | Searching catalog removes words. Why? | | Viewed: | 69 times | | Topic: | Catalog | | Status: | Open | |
|
| For example, I have tile 98138pb033, a soda can top. So I search "can". Catalog
returns "The following keywords were excluded from your search: can". I then
have to search with the quotation marks for " "can" ", so it finds it. Why does
the catalog search function decide to not search the word? I've had it do
the same thing with numbers. Is it a length issue, ie, has to be a minimum of
4 characters, or something?
Thanks,
Miles (C0lsanders_)
|
|
| Author: | Hexy | | Posted: | Mar 17, 2021 19:48 | | Subject: | Category in part titles | | Viewed: | 54 times | | Topic: | Catalog | | Status: | Open | |
|
| Most of the categories in the bricklink catalogue have the category title as
the first part of the name. A few don't have that though. I understand bricklink
is currently working on written guidelines for catalogue naming, is this something
they wish to remove from titles or add to the categories that don't have
it?
Regards,
Theo - The_RealRedHex
|
| Author: | mjwest83 | | Posted: | Mar 16, 2021 20:34 | | Subject: | Set 40449 Approval | | Viewed: | 62 times | | Topic: | Catalog | | Status: | Open | |
|
| When will set 40449 be approved for listing? The set has been out for two days
now, and I'd like to do the inventory. And I can't put the set together,
if I'm gonna do the inventory. So, can it get approved?
Thanks!
|
|
| Author: | Teup | | Posted: | Mar 16, 2021 03:53 | | Subject: | Two Weeks?! | | Viewed: | 536 times | | Topic: | Catalog | | Status: | Open | |
|
| This is not a big deal for me personally as I am not currently selling here,
so I can plan it when I want.. but... really?!
The catalog changes are scheduled for April 1. That's only 2 weeks away.
I noticed that this is a DRAMATIC catalog update that will throw the entire store
upside down. Definitely won't be able to take my entire 1.2 million parts
store apart and piece it back together just casually within these next two weeks
between sorting orders. Especially moving all the wedges will be be fun puzzle.
Not gonna object against any changes, they seem alright to me. Except that there's
one change clearly missing from that list: Moving the 2x2 corner brick to Brick,
Modified.. (since plate and tile are there)
I hope this really was THE update everyone was waiting for, and now we're
satisfied..
|
|
| Author: | StormChaser | | Posted: | Mar 15, 2021 20:01 | | Subject: | Scala Assistance Needed | | Viewed: | 79 times | | Topic: | Catalog | | Status: | Open | |
|
| We have pending requests to change the titles of these two parts to remove the
word "Scala:"
Problem is, Scala has its own connection system and we don't know if these
parts are only compatible with those connections. Will the tile and dish attach
to building system parts?
If anyone has these parts and can assist us in making this decision we'd
appreciate it.
|
| Author: | rick_holl | | Posted: | Mar 15, 2021 15:46 | | Subject: | 76170 Inventory | | Viewed: | 40 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi,
I'm adding the 76170 set inventory.
For the minifigs. Do you include the stand in the minifig listing as it is in
the minifig part list and instruction in the booklet?
|
| Author: | yorbrick | | Posted: | Mar 15, 2021 07:39 | | Subject: | Vidiyo Genie | | Viewed: | 107 times | | Topic: | Catalog | | Status: | Open | |
|
| Does anyone know what is holding up the Vidiyo Genie?
Minifig No: vid013 Name: Genie Dancer
Minifig No: vidbm005 Name: Genie Dancer - Minifigure only Entry
One has the right numbering but the wrong name, the other has the right name
but wrong numbering.
Is something else missing that is holding these up?
|
| Author: | Jabbz | | Posted: | Mar 15, 2021 05:38 | | Subject: | Adding this torso | | Viewed: | 66 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi,
I'm hopeless at adding parts, I found this torso at a BAM last year, I was
wondering if anyone could add it for me? I believe the colour is Lavender.
Cheers,
Joe
|
|
| Author: | 1974 | | Posted: | Mar 14, 2021 10:53 | | Subject: | No black border on black 3004p03 | | Viewed: | 89 times | | Topic: | Catalog | | Status: | Open | |
|
| As the subject says ...
So, it's not the same as the white 3004p03
Also, who vacuumed the market for that part? I need a bunch 
Cheers,
Ole
|
| Author: | axaday | | Posted: | Mar 13, 2021 21:42 | | Subject: | Please Consider Complicated Merge | | Viewed: | 123 times | | Topic: | Catalog | | Status: | Open | |
|
|
This piece is pending, submitted by DeLuca and photographed by me. My piece
is orange inside and orange where the stamping is and all. This submission follows
the precedent set on this mold, but I think a mistake has been repeated in that
string. I THINK the way we usually do that, it is the same piece as
and . A dark brown pieces, a red piece, and an orange piece all
with black hair pattern. Right? Fixing it requires things I can't submit
a form for.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
Canada, Quebec
Netherlands, Overijssel
South Korea, Seoul
Germany, Hessen
United Kingdom, England
Denmark
)
)
)
Italy, Emilia-Romagna
Switzerland, Bern
Australia, Victoria
Kazakhstan
