Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | starbeanie  | | Posted: | Jun 16, 2020 23:22 | | Subject: | Re: Sails still attached - qualify for entry? | | Viewed: | 35 times | | Topic: | Catalog | |
|
| Sweet!!!!
In Catalog, electricbaer writes:
| | I've come across this rare gem - A full, uncut set of sails from the Carribbean
Clipper, still attached, never used. Well, obviously I'd classify this particular
one as used as I found it floating around in a box of parts. But anyway, I don't
see a catalog entry for the sails still being attached. I'd be happy to
submit them as an entry if they are quantifiable. I'd plan to straighten
them before posting a pic - They're still a tad bit wrinkly from taking a
bath, I mean, they are 31 years old 
|
|
 |
| Author: | electricbaer | | Posted: | Jun 16, 2020 20:44 | | Subject: | Sails still attached - qualify for entry? | | Viewed: | 93 times | | Topic: | Catalog | | Status: | Open | |
|
| I've come across this rare gem - A full, uncut set of sails from the Carribbean
Clipper, still attached, never used. Well, obviously I'd classify this particular
one as used as I found it floating around in a box of parts. But anyway, I don't
see a catalog entry for the sails still being attached. I'd be happy to
submit them as an entry if they are quantifiable. I'd plan to straighten
them before posting a pic - They're still a tad bit wrinkly from taking a
bath, I mean, they are 31 years old
|
|
|
| Author: | randyf | | Posted: | Jun 16, 2020 18:43 | | Subject: | Re: incorrect or missing known colour | | Viewed: | 29 times | | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| | In Catalog, Fragty writes:
| | Come to think of it...it's even remarkable that stickered parts from idea
books are in the catalog.
|
| | Maybe because these particular ones (bill and mary)
are so iconic that they deserve a spot in the catalog?
|
They should not be in the catalog. I faced some pushback when suggesting they
be removed, though. The only reason given was "historical reasons."
|
What pushback? These should obviously not be in the catalog.
|
|
| Author: | StormChaser | | Posted: | Jun 16, 2020 11:31 | | Subject: | Re: incorrect or missing known colour | | Viewed: | 46 times | | Topic: | Catalog | |
|
| In Catalog, Fragty writes:
| | Come to think of it...it's even remarkable that stickered parts from idea
books are in the catalog.
|
| | Maybe because these particular ones (bill and mary)
are so iconic that they deserve a spot in the catalog?
|
They should not be in the catalog. I faced some pushback when suggesting they
be removed, though. The only reason given was "historical reasons."
|
|
| Author: | Fragty | | Posted: | Jun 16, 2020 10:29 | | Subject: | Re: incorrect or missing known colour | | Viewed: | 25 times | | Topic: | Catalog | |
|
| Come to think of it...it's even remarkable that stickered parts from idea
books are in the catalog. Maybe because these particular ones (bill and mary)
are so iconic that they deserve a spot in the catalog?
I wonder if there are more in the catalog...
|
|
| Author: | Fragty | | Posted: | Jun 16, 2020 10:22 | | Subject: | Re: incorrect or missing known colour | | Viewed: | 29 times | | Topic: | Catalog | |
|
| In Catalog, beasville writes:
| |
This part has 1 known colour listed: white. But the only picture is of this part
in red. This torso is found in one part, that part is also listed as white.
Could an additional known colour of red be added? The Torso assembly would be
red torso, red arms, red hands.
|
Imo we shouldnt, because this is actually a misplaced sticker so its more or
less a custom item. If you gonna add that to the catalog, you would have to
add every misplaced sticker, and since you can place stickers everywhere there
will be no end...
The part you mention is sold by one store, and thats his picture too I believe.
btw There is a picture of the white version, but its the torso assembly
|
|
| Author: | beasville | | Posted: | Jun 16, 2020 09:55 | | Subject: | incorrect or missing known colour | | Viewed: | 84 times | | Topic: | Catalog | | Status: | Open | |
|
|
This part has 1 known colour listed: white. But the only picture is of this part
in red. This torso is found in one part, that part is also listed as white.
Could an additional known colour of red be added? The Torso assembly would be
red torso, red arms, red hands.
|
|
| Author: | tonnic | | Posted: | Jun 16, 2020 04:29 | | Subject: | Re: Tubes baseplates from the 70's vs newer ones | | Viewed: | 30 times | | Topic: | Catalog | |
|
| In Catalog, novabrick writes:
| | In Catalog, primadeluxe writes:
| | All the baseplates from the 70's, which I have from original sets, have different
tubes (do you call them tubes?) compared with newer baseplates. I do not know
when this chance took place, but is it worth to add a note for these baseplates
as they come in different variations?
It would be a lot of work making pictures aspecially with all the baseplates
with white dots and I certainly do not have them all.
On the attached picture is a example from set 648-1. On the right the original
one from the 70's and on the left a newer one.
|
It's true though we have similar looking undersides like this with sharp
edges around the hole and more curved ones.
I have the suspision they cut smaller baseplates from bigger ones. at least I
have seen plenty of edges that look cut. But this might be a custom job from
the people we bought it from.
Christian
novabrick-team
|
They are cut of a larger in factory, cut to the size that was needed.
That is why older baseplates may have the whiter looking stressmarks.
I always mention this in my description so buyers know what they buy.
|
|
| Author: | primadeluxe | | Posted: | Jun 16, 2020 04:02 | | Subject: | Re: Tubes baseplates from the 70's vs newer ones | | Viewed: | 23 times | | Topic: | Catalog | |
|
| Ok, I have submitted a request for this part 3865.
In Catalog, StormChaser writes:
| | In Catalog, primadeluxe writes:
| | (do you call them tubes?)
|
I would say underside indentions.
| | is it worth to add a note for these baseplates
|
I would say it wouldn't hurt anything.
| | as they come in different variations?
|
I would agree.
|
|
| Author: | StormChaser | | Posted: | Jun 16, 2020 03:43 | | Subject: | Re: Tubes baseplates from the 70's vs newer ones | | Viewed: | 40 times | | Topic: | Catalog | |
|
| In Catalog, primadeluxe writes:
| | (do you call them tubes?)
|
I would say underside indentions.
| | is it worth to add a note for these baseplates
|
I would say it wouldn't hurt anything.
| | as they come in different variations?
|
I would agree.
|
|
| Author: | novabrick | | Posted: | Jun 16, 2020 01:39 | | Subject: | Re: Tubes baseplates from the 70's vs newer ones | | Viewed: | 39 times | | Topic: | Catalog | |
|
| In Catalog, primadeluxe writes:
| | All the baseplates from the 70's, which I have from original sets, have different
tubes (do you call them tubes?) compared with newer baseplates. I do not know
when this chance took place, but is it worth to add a note for these baseplates
as they come in different variations?
It would be a lot of work making pictures aspecially with all the baseplates
with white dots and I certainly do not have them all.
On the attached picture is a example from set 648-1. On the right the original
one from the 70's and on the left a newer one.
|
It's true though we have similar looking undersides like this with sharp
edges around the hole and more curved ones.
I have the suspision they cut smaller baseplates from bigger ones. at least I
have seen plenty of edges that look cut. But this might be a custom job from
the people we bought it from.
Christian
novabrick-team
|
|
| Author: | primadeluxe | | Posted: | Jun 16, 2020 01:34 | | Subject: | Tubes baseplates from the 70's vs newer ones | | Viewed: | 125 times | | Topic: | Catalog | | Status: | Open | |
|
| All the baseplates from the 70's, which I have from original sets, have different
tubes (do you call them tubes?) compared with newer baseplates. I do not know
when this chance took place, but is it worth to add a note for these baseplates
as they come in different variations?
It would be a lot of work making pictures aspecially with all the baseplates
with white dots and I certainly do not have them all.
On the attached picture is a example from set 648-1. On the right the original
one from the 70's and on the left a newer one.
|
|
|
|
| Author: | normann1974 | | Posted: | Jun 15, 2020 17:44 | | Subject: | Re: 88072 in Light Gray | | Viewed: | 31 times | | Topic: | Catalog | |
|
| In Catalog, normann1974 writes:
| | In Catalog, StormChaser writes:
| | In Catalog, normann1974 writes:
| | So where do we go from here? Could the note for the two parts be updated?
|
You're welcome to submit a request stating exactly what needs to be changed.
|
I can't do this. IMHO, a decision about the future road of these two parts
(and any new parts needed to be made) must be made by admin, and I expect them
to make the necessary changes to the catalog. I have seen no traces of any final
decision made yet.
/Jan
|
I'll make a request to have the notes changed, but splitting/new parts and
inventories I leave to others.
/Jan
|
|
| Author: | normann1974 | | Posted: | Jun 15, 2020 17:36 | | Subject: | Re: 88072 in Light Gray | | Viewed: | 40 times | | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| | In Catalog, normann1974 writes:
| | So where do we go from here? Could the note for the two parts be updated?
|
You're welcome to submit a request stating exactly what needs to be changed.
|
I can't do this. IMHO, a decision about the future road of these two parts
(and any new parts needed to be made) must be made by admin, and I expect them
to make the necessary changes to the catalog. I have seen no traces of any final
decision made yet.
/Jan
|
|
| Author: | StormChaser | | Posted: | Jun 15, 2020 13:04 | | Subject: | Re: 88072 in Light Gray | | Viewed: | 35 times | | Topic: | Catalog | |
|
| In Catalog, normann1974 writes:
| | So where do we go from here? Could the note for the two parts be updated?
|
You're welcome to submit a request stating exactly what needs to be changed.
| | They (and some of the inventories containing the 6mm part) are clearly wrong now.
|
Here I would suggest inventory change requests where appropriate.
|
|
| Author: | electricbaer | | Posted: | Jun 15, 2020 12:08 | | Subject: | Re: Can stickers over 2 parts be added? | | Viewed: | 22 times | | Topic: | Catalog | |
|
| In Catalog, SurplusParts writes:
| | This is the dashboard sticker from
It is placed over 2 black arches 6005.
Can this placed in the catalogue as a stickered counterpart?
Asking as it is over 2 parts and not one it may not be.
Thanks
Douglas
|
Yes, as I learned not too long ago and opened up the floodgates with additions
|
|
| Author: | SylvainLS | | Posted: | Jun 15, 2020 12:01 | | Subject: | Re: Tan Knit Sweater Minifig Torso (76382) | | Viewed: | 31 times | | Topic: | Catalog | |
|
| In Catalog, DianeGronas writes:
| | Tan Knit Sweater Minifig Torso (76382)
|
As your first post was about PartDesigner, I’m guessing you’re asking for this
part to be added to Studio.
If that’s the case, the dedicated forum for Studio is https://forum.bricklink.com/
(red Studio icon on every page, “Builder Forum”).
But as you didn’t answer any of the other answers, I’m also guessing you won’t
read this answer either….
|
|
| Author: | SylvainLS | | Posted: | Jun 15, 2020 12:01 | | Subject: | Re: Sea Captain's White Hat (13553 / 31841) | | Viewed: | 20 times | | Topic: | Catalog | |
|
| In Catalog, DianeGronas writes:
| | Sea Captain's White Hat (13553 / 31841)
|
As your first post was about PartDesigner, I’m guessing you’re asking for this
part to be added to Studio.
If that’s the case, the dedicated forum for Studio is https://forum.bricklink.com/
(red Studio icon on every page, “Builder Forum”).
But as you didn’t answer any of the other answers, I’m also guessing you won’t
read this answer either….
|
|
| Author: | SylvainLS | | Posted: | Jun 15, 2020 12:00 | | Subject: | Re: Sea Captain Torso (973 / 88585) | | Viewed: | 21 times | | Topic: | Catalog | |
|
| In Catalog, DianeGronas writes:
| | Sea Captain Torso (973 / 88585)
|
As your first post was about PartDesigner, I’m guessing you’re asking for this
part to be added to Studio.
If that’s the case, the dedicated forum for Studio is https://forum.bricklink.com/
(red Studio icon on every page, “Builder Forum”).
But as you didn’t answer any of the other answers, I’m also guessing you won’t
read this answer either….
|
|
| Author: | SylvainLS | | Posted: | Jun 15, 2020 12:00 | | Subject: | Re: Captain Jones Minifig Torso (76382) | | Viewed: | 18 times | | Topic: | Catalog | |
|
| In Catalog, DianeGronas writes:
| | Captain Jones Minifig Torso (76382)
|
As your first post was about PartDesigner, I’m guessing you’re asking for this
part to be added to Studio.
If that’s the case, the dedicated forum for Studio is https://forum.bricklink.com/
(red Studio icon on every page, “Builder Forum”).
But as you didn’t answer any of the other answers, I’m also guessing you won’t
read this answer either….
|
|
| Author: | SylvainLS | | Posted: | Jun 15, 2020 12:00 | | Subject: | Re: Obi-Wan Kenobi Large Figure Head (21939) | | Viewed: | 26 times | | Topic: | Catalog | |
|
| In Catalog, DianeGronas writes:
| | Obi-Wan Kenobi Large Figure Head (21939)
|
As your first post was about PartDesigner, I’m guessing you’re asking for this
part to be added to Studio.
If that’s the case, the dedicated forum for Studio is https://forum.bricklink.com/
(red Studio icon on every page, “Builder Forum”).
But as you didn’t answer any of the other answers, I’m also guessing you won’t
read this answer either….
|
| Author: | tonnic | | Posted: | Jun 15, 2020 11:46 | | Subject: | Re: Sea Captain Torso (973 / 88585) | | Viewed: | 25 times | | Topic: | Catalog | |
|
| In Catalog, DianeGronas writes:
What is the meaning of all your forumposts?
They are no questions, at least not as I read them.
|
| Author: | yorbrick | | Posted: | Jun 15, 2020 09:49 | | Subject: | Re: Tan Knit Sweater Minifig Torso (76382) | | Viewed: | 38 times | | Topic: | Catalog | |
|
| In Catalog Requests, DianeGronas writes:
| | Tan Knit Sweater Minifig Torso (76382)
|
Why are you starting loads of threads with no questions in?
|
| Author: | DianeGronas | | Posted: | Jun 15, 2020 09:48 | | Subject: | Tan Knit Sweater Minifig Torso (76382) | | Viewed: | 95 times | | Topic: | Catalog | | Status: | Open | |
|
| | Tan Knit Sweater Minifig Torso (76382) |
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
USA, Virginia
Belgium
Canada, Ontario
Netherlands, Noord-Holland
Germany, Schleswig-Holstein
Denmark
France, Nouvelle-Aquitaine
United Kingdom, England