Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | BigBBricks | Posted: | Aug 29, 2019 20:47 | Subject: | 49595 contents | Viewed: | 105 times | Topic: | Catalog | Status: | Open | |
|
| I have added the contents of 49595, a-g, for catalog submission but do not have
images since BL requires minimum sizes and I only have smaller images which I
could not upload.
I am asking that the items be allowed to be added without the photo or allow
the smaller image as having a photo does not seem to be a prerequisite considering
the vast number of empty cape boxes that are being added without photos.
(I'm not questioning why empty cape boxes are trending in the new items added
category, everyone has a thing)
Thank you for your consideration in adding without photo or feel free to add
the photo without me
- Big B
|
|
Author: | popsicle | Posted: | Aug 28, 2019 19:59 | Subject: | Re: Inviting trouble | Viewed: | 106 times | Topic: | Catalog | |
|
| In General, mfav writes:
Although I’m usually clueless to the subtleties here in the forum, I don’t get
the “Inviting trouble” title. I can’t see how. I assume it’s referencing your
second comment of not having an issue if someone “takes the initiative”, as in
inviting competition for you and goatleg.com?
Regardless, it’s good to hear from you again, Mark.
Your inviting trouble remark, brings to mind: https://www.youtube.com/watch?v=yg-1qW2xAU4
|
|
Author: | mfav | Posted: | Aug 28, 2019 15:21 | Subject: | Inviting trouble | Viewed: | 222 times | Topic: | Catalog | Status: | Open | |
|
| http://v4ei.com/mini-fig-ure-outer/
I promise not to have a conniption if anyone takes the initiative.
|
Author: | Teup | Posted: | Aug 26, 2019 19:04 | Subject: | Re: Do part numbers change? | Viewed: | 44 times | Topic: | Catalog | |
|
| In Catalog, SylvainLS writes:
| In Catalog, Teup writes:
| […]
€20 I spent on a programmer
|
That’s what, one pizza and a coke?
|
The programmer only asked for €13 for the tasks I gave him but I added a tip,
considering that programmers are usually too expensive and too busy
|
|
Author: | Teup | Posted: | Aug 26, 2019 19:01 | Subject: | Re: Do part numbers change? | Viewed: | 47 times | Topic: | Catalog | |
|
| In Catalog, 62Bricks writes:
| In Catalog, Teup writes:
| I'm working on my own webshop and want it to synchronise well with my Bricklink
store. My software seems to work pretty well, but now I'm wondering, does
it happen that names/numbers of parts change on Bricklink, and if so, how often
does that occur? I want to gauge how necessary it is to do some extra coding
to accommodate for this.
|
Possibly you should be made aware that Bricklink considers its part names and
numbers to be its own proprietary information, and that using them on your own
commerce site might draw unneeded problems. They have taken action at least once
in the past to require another site to stop using the Bricklink part numbers.
As a result, other sites choose to come up with their own part numbering system,
or they use the LDraw names and numbers, which can be used freely with the proper
attribution.
Of course many BL numbers are the numbers actually molded on the parts by LEGO,
and these are probably safe to use. Also, many BL part names and numbers are
from LDraw. These should also be safe to use.
|
Thanks for the advice. Actually I'm not "using" Bricklink part numbers -
my sync system just needs to know what is what, so for that part, it's essential
that my software is able to "speak Bricklinkish" - I imagine that's the same
for BrickOwl and for Brickstock. I don't use it in the shop itself for the
customers. Names/descriptions I'm not using at all, I've described them
in Dutch (which was the most exhausting part of the job )
|
|
Author: | 62Bricks | Posted: | Aug 26, 2019 18:10 | Subject: | Re: Do part numbers change? | Viewed: | 41 times | Topic: | Catalog | |
|
| In Catalog, Teup writes:
| I'm working on my own webshop and want it to synchronise well with my Bricklink
store. My software seems to work pretty well, but now I'm wondering, does
it happen that names/numbers of parts change on Bricklink, and if so, how often
does that occur? I want to gauge how necessary it is to do some extra coding
to accommodate for this.
|
Possibly you should be made aware that Bricklink considers its part names and
numbers to be its own proprietary information, and that using them on your own
commerce site might draw unneeded problems. They have taken action at least once
in the past to require another site to stop using the Bricklink part numbers.
As a result, other sites choose to come up with their own part numbering system,
or they use the LDraw names and numbers, which can be used freely with the proper
attribution.
Of course many BL numbers are the numbers actually molded on the parts by LEGO,
and these are probably safe to use. Also, many BL part names and numbers are
from LDraw. These should also be safe to use.
|
|
Author: | SylvainLS | Posted: | Aug 26, 2019 17:19 | Subject: | Re: Do part numbers change? | Viewed: | 26 times | Topic: | Catalog | |
|
| In Catalog, Teup writes:
| […]
€20 I spent on a programmer
|
That’s what, one pizza and a coke?
|
|
Author: | Teup | Posted: | Aug 26, 2019 17:05 | Subject: | Re: Do part numbers change? | Viewed: | 34 times | Topic: | Catalog | |
|
| In Catalog, Andrsv writes:
| In Catalog, Teup writes:
| I'm working on my own webshop and want it to synchronise well with my Bricklink
store. My software seems to work pretty well, but now I'm wondering, does
it happen that names/numbers of parts change on Bricklink, and if so, how often
does that occur? I want to gauge how necessary it is to do some extra coding
to accommodate for this.
|
I'm eager to hear more about your webshop. As far as I've understood
you've been dreaming about it for quite some time now, and finally your on
the way. Do you have something to show? Screenshot? Do you have a markedplan?
How do you decide which features to add? How big development team have you managed
to put together?
Good luck
|
Thanks! You're right! Someone I know put me on the right track with a content
management system that's featured in my hosting package. I'm essentially
able to do it all by myself, thanks to the versatile system, a bit of programming
skills I do have, and €20 I spent on a programmer to tweak some things It
has been a huge amount of work so far, 1. tweaking the store, 2. writing software
that turns inventory files that I download from Bricklink into the format I need,
3. writing an entire database of all parts and 4. finding rights free pictures
of everything. I really don't want to take anything from Bricklink that was
given by contributers and isn't mine, so I'm really working like crazy
these weeks
I won't go sharing much of it, as I don't want to border on inviting
to buy outside of Bricklink. But anyway my main idea is to make a very white,
minimal site with good overview, and make it all Dutch. I'm going to try
to focus on the Dutch market, since I believe there's an untapped market
there for people who aren't insiders but would buy from a friendly accessable
webstore they can understand easily, and use the payment method they're comfortable
with that isn't featured on Bricklink. Also, having my own store means I
can go and advertise it everywhere. That's alot better than constantly having
to tell people that my store is on some platform called Bricklink.
I don't know if I'm right. I could be wrong, but if so, it'll just
mean one wasted summer If I am right, I could be having some great business
and stability for many years to come. But probably I will be having to boost
my inventory alot more in order for my store to be significant enough by itself.
I hope hierachical category system and independent filters for many part properties
are going to be selling points.
I was willing to gamble some €2000 on having someone build me a store, so if
everything fails, I'm fine with just having wasted a lot of time and still
have all my money - except from the €20
|
|
Author: | Teup | Posted: | Aug 26, 2019 16:52 | Subject: | Re: Do part numbers change? | Viewed: | 30 times | Topic: | Catalog | |
|
| In Catalog, Hygrotus writes:
Thanks Marek, that's useful! Looks quite intimidating anyway, all those changes.
I've now put a module into place that recognises "new" parts that have new
part numbers but are linked to previously existing LotIDs in my inventory. It
then adds the new part and updates the lot with the old part number to zero quantity.
I think that should do the trick
|
|
Author: | Andrsv | Posted: | Aug 26, 2019 15:45 | Subject: | Re: Do part numbers change? | Viewed: | 36 times | Topic: | Catalog | |
|
| In Catalog, Teup writes:
| I'm working on my own webshop and want it to synchronise well with my Bricklink
store. My software seems to work pretty well, but now I'm wondering, does
it happen that names/numbers of parts change on Bricklink, and if so, how often
does that occur? I want to gauge how necessary it is to do some extra coding
to accommodate for this.
|
I'm eager to hear more about your webshop. As far as I've understood
you've been dreaming about it for quite some time now, and finally your on
the way. Do you have something to show? Screenshot? Do you have a markedplan?
How do you decide which features to add? How big development team have you managed
to put together?
Good luck
|
|
|
Author: | Hygrotus | Posted: | Aug 26, 2019 15:39 | Subject: | Re: Do part numbers change? | Viewed: | 37 times | Topic: | Catalog | |
|
| In Catalog, Teup writes:
| I'm working on my own webshop and want it to synchronise well with my Bricklink
store. My software seems to work pretty well, but now I'm wondering, does
it happen that names/numbers of parts change on Bricklink, and if so, how often
does that occur? I want to gauge how necessary it is to do some extra coding
to accommodate for this.
|
Those can change as bb... are replacment bricklink numbers when part number is
not known. So wneh somebody discover correct number they can be changed
https://www.bricklink.com/catalogListOld.asp?pg=1&q=bb%2A&catLike=W&itemBrand=1000&v=1
|
|
Author: | Teup | Posted: | Aug 26, 2019 15:37 | Subject: | Re: Do part numbers change? | Viewed: | 35 times | Topic: | Catalog | |
|
| In Catalog, yorbrick writes:
| In Catalog, Teup writes:
| I'm working on my own webshop and want it to synchronise well with my Bricklink
store. My software seems to work pretty well, but now I'm wondering, does
it happen that names/numbers of parts change on Bricklink, and if so, how often
does that occur? I want to gauge how necessary it is to do some extra coding
to accommodate for this.
|
I imagine most parts now have the correct numbers but minifigure can change,
like the extra 0 in SW figs.
|
Yes, I noticed some added 0's in the pattern numbers of some parts, because
the Bricklink number did not match with what Rebrickable thought was the Bricklink
number. I wonder how regularly such things happen. If it's a rare thing then
I should be fine just whiping and reuploading my entire webshop once in a while,
but if it's regular I should think of some way to update these items specifically.
|
|
Author: | yorbrick | Posted: | Aug 26, 2019 15:32 | Subject: | Re: Do part numbers change? | Viewed: | 32 times | Topic: | Catalog | |
|
| In Catalog, Teup writes:
| I'm working on my own webshop and want it to synchronise well with my Bricklink
store. My software seems to work pretty well, but now I'm wondering, does
it happen that names/numbers of parts change on Bricklink, and if so, how often
does that occur? I want to gauge how necessary it is to do some extra coding
to accommodate for this.
|
I imagine most parts now have the correct numbers but minifigure can change,
like the extra 0 in SW figs.
|
|
Author: | Teup | Posted: | Aug 26, 2019 15:27 | Subject: | Do part numbers change? | Viewed: | 125 times | Topic: | Catalog | Status: | Open | |
|
| I'm working on my own webshop and want it to synchronise well with my Bricklink
store. My software seems to work pretty well, but now I'm wondering, does
it happen that names/numbers of parts change on Bricklink, and if so, how often
does that occur? I want to gauge how necessary it is to do some extra coding
to accommodate for this.
|
Author: | Breyton | Posted: | Aug 24, 2019 18:14 | Subject: | letter restrictions | Viewed: | 115 times | Topic: | Catalog | Status: | Open | |
|
| there are resrictions to letters on submit part page. there are many parts that
use letters.
|
|
Author: | Hurt | Posted: | Aug 23, 2019 17:15 | Subject: | Re: Found torso with Lego logo that is not on BL | Viewed: | 59 times | Topic: | Catalog | |
|
| In Catalog, Hurt writes:
| Hi everyone,
I found a torso with a Lego logo print on it's back - it's not on bricklink.
How should I add this torso? Is it an alternate? Or is it already in the catalog
and I can't find it?
It's this one (with Lego logo on the back):
|
Indeed, it seems to be a keychain figure, thanks both of you!
I was able to remove the head, so I didn't check further, but the legs are
stuck to the torso and if you look "closely" you can see a hole at the top of
the head and also at the top of the torso's neck (where the keychain was).
Thanks!
|
|
Author: | Adjour | Posted: | Aug 23, 2019 16:19 | Subject: | Re: Found torso with Lego logo that is not on BL | Viewed: | 64 times | Topic: | Catalog | |
|
| In Catalog, Hurt writes:
| Hi everyone,
I found a torso with a Lego logo print on it's back - it's not on bricklink.
How should I add this torso? Is it an alternate? Or is it already in the catalog
and I can't find it?
It's this one (with Lego logo on the back):
|
I think you'll find that the figure cannot be taken apart, looks like a keychain
to me
|
|
Author: | Turez | Posted: | Aug 23, 2019 16:00 | Subject: | Re: Found torso with Lego logo that is not on BL | Viewed: | 51 times | Topic: | Catalog | |
|
| In Catalog, Hurt writes:
| Hi everyone,
I found a torso with a Lego logo print on it's back - it's not on bricklink.
How should I add this torso? Is it an alternate? Or is it already in the catalog
and I can't find it?
It's this one (with Lego logo on the back):
|
Hi,
minifigures from key chains have the Lego logo on their backs. So you have probably
this one:
Regards,
Jonas
|
|
Author: | Hurt | Posted: | Aug 23, 2019 15:52 | Subject: | Found torso with Lego logo that is not on BL | Viewed: | 131 times | Topic: | Catalog | Status: | Open | |
|
| Hi everyone,
I found a torso with a Lego logo print on it's back - it's not on bricklink.
How should I add this torso? Is it an alternate? Or is it already in the catalog
and I can't find it?
It's this one (with Lego logo on the back):
|
|
|
Author: | Hurt | Posted: | Aug 23, 2019 13:51 | Subject: | Re: I think those 2 torsos are the same | Viewed: | 28 times | Topic: | Catalog | |
|
| In Catalog, axaday writes:
| In Catalog, Hurt writes:
| Oh ... honestly, didn't check before
Thanks!
In Catalog, axaday writes:
| In Catalog, Hurt writes:
| The torsos in question:
From 2017:
From 2019:
[P=973pb3544c01]
I've added some items / pictures, but how can I request a merge of both entries?
|
Strangely enough, someone else already did. Just a bit before you.
https://www.bricklink.com/message.asp?ID=1154134
|
|
The pieces were submitted by Hygrotus and I and we both watch all the incoming
things in the catalog and neither of us noticed it. And then they sat there
for a couple of months and then two people noticed a couple hours apart.
|
Hehe
I was looking for the torso with goatleg, found the one from cty1022, then I
looked further for some legs (970c00pb0718) and noticed that the minifigure (njo355)
with those legs has the same torso, although BL says that the previous one only
appears for one minifigure (cty1022).
But at least they are both priced nearly the same, so merging them shouldn't
be an issue I guess
|
|
Author: | axaday | Posted: | Aug 23, 2019 13:41 | Subject: | Re: I think those 2 torsos are the same | Viewed: | 28 times | Topic: | Catalog | |
|
| In Catalog, Hurt writes:
| Oh ... honestly, didn't check before
Thanks!
In Catalog, axaday writes:
| In Catalog, Hurt writes:
| The torsos in question:
From 2017:
From 2019:
[P=973pb3544c01]
I've added some items / pictures, but how can I request a merge of both entries?
|
Strangely enough, someone else already did. Just a bit before you.
https://www.bricklink.com/message.asp?ID=1154134
|
|
The pieces were submitted by Hygrotus and I and we both watch all the incoming
things in the catalog and neither of us noticed it. And then they sat there
for a couple of months and then two people noticed a couple hours apart.
|
|
Author: | Hurt | Posted: | Aug 23, 2019 13:38 | Subject: | Re: I think those 2 torsos are the same | Viewed: | 30 times | Topic: | Catalog | |
|
| Oh ... honestly, didn't check before
Thanks!
In Catalog, axaday writes:
| In Catalog, Hurt writes:
| The torsos in question:
From 2017:
From 2019:
[P=973pb3544c01]
I've added some items / pictures, but how can I request a merge of both entries?
|
Strangely enough, someone else already did. Just a bit before you.
https://www.bricklink.com/message.asp?ID=1154134
|
|
Author: | Graham. | Posted: | Aug 23, 2019 13:27 | Subject: | Re: What do these mean? | Viewed: | 19 times | Topic: | Catalog | |
|
| Thanks! |
|
Author: | Hygrotus | Posted: | Aug 23, 2019 13:22 | Subject: | Re: What do these mean? | Viewed: | 46 times | Topic: | Catalog | |
|
| In Catalog, Thunor writes:
| ... or signify.
Ive never even bothered before but now curiosity got me!
Symbols under image are either * or *! So what do they mean?
Thanks
|
Frequently asked question
When you click on item photo "View in 3D" For example
https://www.bricklink.com/catalogItemPic.asp?P=3005&tab=I
there you have it
"Quick Help Tips:
1. The above large image serves only as an example of the item you selected.
2. The color of the above image might not be the same as the item that you're
browsing.
3. Click on the image to go back to the page you came from.
4. A small asterisk (*) below a thumbnail image indicates that there is a
large image (like the one you see on this page) available when you click on the
small thumbnail.
5. An exclamation mark (!) below a thumbnail image indicates that there is 3D
data available."
|
|
Author: | Graham. | Posted: | Aug 23, 2019 13:16 | Subject: | What do these mean? | Viewed: | 134 times | Topic: | Catalog | Status: | Open | |
|
| ... or signify.
Ive never even bothered before but now curiosity got me!
Symbols under image are either * or *! So what do they mean?
Thanks
|
Author: | axaday | Posted: | Aug 23, 2019 12:30 | Subject: | Re: I think those 2 torsos are the same | Viewed: | 33 times | Topic: | Catalog | |
|
| In Catalog, Hurt writes:
| The torsos in question:
From 2017:
From 2019:
[P=973pb3544c01]
I've added some items / pictures, but how can I request a merge of both entries?
|
Strangely enough, someone else already did. Just a bit before you.
https://www.bricklink.com/message.asp?ID=1154134
|
Author: | Hurt | Posted: | Aug 23, 2019 12:18 | Subject: | I think those 2 torsos are the same | Viewed: | 97 times | Topic: | Catalog | Status: | Open | |
|
| The torsos in question:
From 2017:
From 2019:
[P=973pb3544c01]
I've added some items / pictures, but how can I request a merge of both entries?
|
|
Author: | Hygrotus | Posted: | Aug 23, 2019 08:09 | Subject: | Re: Resistance Pilot U-wing (sw0800) | Viewed: | 35 times | Topic: | Catalog | |
|
| In Catalog, Taszeuhl writes:
| It just occured to me that the following minifigure:
Resistance Pilot U-wing (sw0800)
should be called something different. It's a Rogue One character, and the
U-Wing is a Rebel ship, so it's actually a Rebel pilot, not a Resistance
pilot. Not a huge deal, but changing the name is probably still a good idea.
|
Changed. Thanks for noticed.
|
|
Author: | Taszeuhl | Posted: | Aug 23, 2019 07:55 | Subject: | Resistance Pilot U-wing (sw0800) | Viewed: | 56 times | Topic: | Catalog | Status: | Open | |
|
| It just occured to me that the following minifigure:
Resistance Pilot U-wing (sw0800)
should be called something different. It's a Rogue One character, and the
U-Wing is a Rebel ship, so it's actually a Rebel pilot, not a Resistance
pilot. Not a huge deal, but changing the name is probably still a good idea.
|
|
Author: | BeauBricks | Posted: | Aug 21, 2019 10:17 | Subject: | Re: Dark Gray Patio Umbrella Stand #4095 | Viewed: | 35 times | Topic: | Catalog | |
|
| In Help, carolannee writes:
| They were included with the Limited Edition Super Chief sets:
http://www.peeron.com/inv/sets/10020-1
In Help, Lego_Friends writes:
| I'm wondering if any of you have come across Dark Gray Patio Umbrella Stands?
I have 3 of them and they are either really good fakes or they are really Dark
Gray. The problem is Bricklink says they don't exist.
This is a picture of them on a Dark Gray 6x8 plate.
Anyone have any ideas?
thanks,
Eileen
|
|
I got these and have the regular edition
|
|
Author: | tEoS | Posted: | Aug 20, 2019 23:55 | Subject: | Re: Dark Gray Patio Umbrella Stand #4095 | Viewed: | 42 times | Topic: | Catalog | |
|
| Here's a thread on Eurobricks about this train. There's mention of some
sets being packed with the wrong color bars, so maybe that was this piece.
Unfortunately, it was too long ago for me to remember.
https://www.eurobricks.com/forum/index.php?/forums/topic/53757-santa-fe-super-chief-limited-edition/
In Help, Lego_Friends writes:
| In Help, carolannee writes:
|
| So Bricklink doesn't list them? Only Peeron does? I just realized that after
I typed my last message.
|
|
|
Author: | thewally | Posted: | Aug 20, 2019 23:49 | Subject: | Re: Dark Gray Patio Umbrella Stand #4095 | Viewed: | 36 times | Topic: | Catalog | |
|
| Oops, and down in flames I go!! |
Author: | tEoS | Posted: | Aug 20, 2019 23:44 | Subject: | Re: Dark Gray Patio Umbrella Stand #4095 | Viewed: | 35 times | Topic: | Catalog | |
|
| No, they are not these:[p=bb219]
In Help, thewally writes:
| Hi, these are not actual LEGO pieces, they are simply packaging pins to hold
tracks together for shipping. They pin 4 or 6 tracks in a stack.
|
|
Author: | thewally | Posted: | Aug 20, 2019 23:36 | Subject: | Re: Dark Gray Patio Umbrella Stand #4095 | Viewed: | 39 times | Topic: | Catalog | |
|
| Hi, these are not actual LEGO pieces, they are simply packaging pins to hold
tracks together for shipping. They pin 4 or 6 tracks in a stack.
|
|
Author: | MusicCityBlocks | Posted: | Aug 20, 2019 00:46 | Subject: | Re: Dark Gray Patio Umbrella Stand #4095 | Viewed: | 45 times | Topic: | Catalog | |
|
| In Help, carolannee writes:
| They were included with the Limited Edition Super Chief sets:
http://www.peeron.com/inv/sets/10020-1
In Help, Lego_Friends writes:
| I'm wondering if any of you have come across Dark Gray Patio Umbrella Stands?
I have 3 of them and they are either really good fakes or they are really Dark
Gray. The problem is Bricklink says they don't exist.
This is a picture of them on a Dark Gray 6x8 plate.
Anyone have any ideas?
thanks,
Eileen
|
|
So Bricklink doesn't list them? Only Peeron does? I just realized that after
I typed my last message.
|
|
Author: | MusicCityBlocks | Posted: | Aug 20, 2019 00:44 | Subject: | Re: Dark Gray Patio Umbrella Stand #4095 | Viewed: | 51 times | Topic: | Catalog | |
|
| In Help, carolannee writes:
| They were included with the Limited Edition Super Chief sets:
http://www.peeron.com/inv/sets/10020-1
In Help, Lego_Friends writes:
| I'm wondering if any of you have come across Dark Gray Patio Umbrella Stands?
I have 3 of them and they are either really good fakes or they are really Dark
Gray. The problem is Bricklink says they don't exist.
This is a picture of them on a Dark Gray 6x8 plate.
Anyone have any ideas?
thanks,
Eileen
|
|
Wow- thanks so much!!
I'm learning a lot tonight!!! I have that set personally so I better go put
these in there!! LOL
Thank you!
|
|
Author: | carolannee | Posted: | Aug 20, 2019 00:40 | Subject: | Re: Dark Gray Patio Umbrella Stand #4095 | Viewed: | 63 times | Topic: | Catalog | |
|
| They were included with the Limited Edition Super Chief sets:
http://www.peeron.com/inv/sets/10020-1
In Help, Lego_Friends writes:
| I'm wondering if any of you have come across Dark Gray Patio Umbrella Stands?
I have 3 of them and they are either really good fakes or they are really Dark
Gray. The problem is Bricklink says they don't exist.
This is a picture of them on a Dark Gray 6x8 plate.
Anyone have any ideas?
thanks,
Eileen
|
|
|
Author: | MusicCityBlocks | Posted: | Aug 20, 2019 00:22 | Subject: | Dark Gray Patio Umbrella Stand #4095 | Viewed: | 99 times | Topic: | Catalog | Status: | Open | |
|
| I'm wondering if any of you have come across Dark Gray Patio Umbrella Stands?
I have 3 of them and they are either really good fakes or they are really Dark
Gray. The problem is Bricklink says they don't exist.
This is a picture of them on a Dark Gray 6x8 plate.
Anyone have any ideas?
thanks,
Eileen
|
|
|
Author: | Hygrotus | Posted: | Aug 17, 2019 16:28 | Subject: | Re: Counterparts for set 41312 | Viewed: | 70 times | Topic: | Catalog | |
|
| In Catalog, kreativsnail writes:
| Here are some pix of 8 the stickered counterparts for set 41312. I want help
to get them submitted and approved for the catalog. I have pix of the other
ones also.
|
I answered in your other message
https://www.bricklink.com/message.asp?ID=1153310
So please add them.
|
|
Author: | Hygrotus | Posted: | Aug 17, 2019 16:26 | Subject: | Re: Stickered counterparts | Viewed: | 44 times | Topic: | Catalog | |
|
| In Catalog, kreativsnail writes:
| I am seeing more and more sets added without the stickered counterparts in the
inventory. I have many of these parts, and will gladly submit pix of them.
|
Yes please do so.
| I am not quite sure if the submissions I made the other day were done correctly
or not, especially when it comes to what number I should assign to the part.
|
[p=87079pb619]
[p=87079pb620]
There was needed only small corrections in names as I remember
| Here is another one, but I haven’t submitted it yet. For set 60173 :
4515pb057 ???? ( the highest number I see anywhere is 4515pb056)
Slope 10 6 x 8 with rusting sheet metal roof 48 sections pattern (Sticker) -
Set 60173
|
https://www.bricklink.com/catalogListOld.asp?pg=1&q=4515%2A&catLike=W&itemBrand=1000&v=1
exactly, first free number is 4515pb057
Please remember also about correct category, just look where other parts of this
type are
And one more advice, in describtion almost all words should beggin from capital
letter beside 'and', 'or', 'with' and other conjunction
those should have small all letters. So your description should look like this
"Slope 10 6 x 8 with Rusting Sheet Metal Roof 48 Sections Pattern (Sticker) -
Set 60173"
|
I want to get this part listed. Unfortunately I don’t have the stickered parts
for the helicopter from this set to add them also.
|
You could also check this message where I tried to explain addition process of
stickered counterparts
https://www.bricklink.com/message.asp?ID=1085264
No many users add stickered parts so many are missing in inventory.
|
|
Author: | kreativsnail | Posted: | Aug 17, 2019 15:21 | Subject: | Re: Counterparts for set 41312 | Viewed: | 28 times | Topic: | Catalog | |
|
| Here are the other 2 stickered counterparts |
|
Author: | kreativsnail | Posted: | Aug 17, 2019 15:19 | Subject: | Counterparts for set 41312 | Viewed: | 53 times | Topic: | Catalog | Status: | Open | |
|
| Here are some pix of 8 the stickered counterparts for set 41312. I want help
to get them submitted and approved for the catalog. I have pix of the other
ones also.
|
|
|
Author: | kreativsnail | Posted: | Aug 17, 2019 15:03 | Subject: | Stickered counterparts | Viewed: | 45 times | Topic: | Catalog | Status: | Open | |
|
| I am seeing more and more sets added without the stickered counterparts in the
inventory. I have many of these parts, and will gladly submit pix of them.
I am not quite sure if the submissions I made the other day were done correctly
or not, especially when it comes to what number I should assign to the part.
Here is another one, but I haven’t submitted it yet. For set 60173 :
4515pb057 ???? ( the highest number I see anywhere is 4515pb056)
Slope 10 6 x 8 with rusting sheet metal roof 48 sections pattern (Sticker) -
Set 60173
I want to get this part listed. Unfortunately I don’t have the stickered parts
for the helicopter from this set to add them also.
|
|
|
Author: | randyf | Posted: | Aug 16, 2019 18:02 | Subject: | Re: "White" color of part 93568pb001 | Viewed: | 41 times | Topic: | Catalog | |
|
| In Catalog, normann1974 writes:
| According to BL, the color of the topping of is "white". Is this
just a loose color description or was it meant to indicate the correct color?
Because it's not white. It's more like Very Light Bluish Gray. Please
see attached picture of part with white, VLBG (shield), LBG and LG.
/Jan
|
It is white printed on dark plastic, so some of the plastic color is transmitted
through the paint, making it look less than white. However, the paint is definitely
white.
Cheers,
Randy
|
|
Author: | normann1974 | Posted: | Aug 16, 2019 17:38 | Subject: | "White" color of part 93568pb001 | Viewed: | 80 times | Topic: | Catalog | Status: | Open | |
|
| According to BL, the color of the topping of is "white". Is this
just a loose color description or was it meant to indicate the correct color?
Because it's not white. It's more like Very Light Bluish Gray. Please
see attached picture of part with white, VLBG (shield), LBG and LG.
/Jan
|
|
|
Author: | nerdsforprez | Posted: | Aug 15, 2019 04:23 | Subject: | Re: inventory "pending approval" | Viewed: | 39 times | Topic: | Catalog | |
|
| TY!
In Catalog, randyf writes:
| In Catalog, nerdsforprez writes:
| I did a search, but couldn't find what I was looking for.
How long does it typically take to approve an inventory? 42099 has been in "pending
status" for several days now.
- Trevor
|
The inventory has not been completed by the submitter of it. When it is complete,
the inventory will most likely be approved in one to two days by either myself
or Paul.
Cheers,
Randy
|
|
|
Author: | randyf | Posted: | Aug 15, 2019 00:34 | Subject: | Re: inventory "pending approval" | Viewed: | 41 times | Topic: | Catalog | |
|
| In Catalog, nerdsforprez writes:
| I did a search, but couldn't find what I was looking for.
How long does it typically take to approve an inventory? 42099 has been in "pending
status" for several days now.
- Trevor
|
The inventory has not been completed by the submitter of it. When it is complete,
the inventory will most likely be approved in one to two days by either myself
or Paul.
Cheers,
Randy
|
|
Author: | nerdsforprez | Posted: | Aug 15, 2019 00:15 | Subject: | inventory "pending approval" | Viewed: | 72 times | Topic: | Catalog | Status: | Open | |
|
| I did a search, but couldn't find what I was looking for.
How long does it typically take to approve an inventory? 42099 has been in "pending
status" for several days now.
- Trevor
|
|
Author: | normann1974 | Posted: | Aug 14, 2019 17:55 | Subject: | Questions for Nordic version of G31314 | Viewed: | 83 times | Topic: | Catalog | Status: | Open | |
|
| I'm about to create the Danish/Norwegian version of [G=G31314] in the BL
catalogue.
But I have one question: In G31314, the 14 curved and 6 straight road sections
are claimed to be identical, but the Nordic versions look different. They contain
studs on the road, and all road sections have subtle differences (see example
of two curved sections in attached image). They may be hard to differentiate
by users, so should I just create one part and maybe have a note on it that inform
of the differences, or should every different part be created?
/Jan
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|