Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | Breyton  | | Posted: | Aug 24, 2019 18:14 | | Subject: | letter restrictions | | Viewed: | 115 times | | Topic: | Catalog | | Status: | Open | |
|
| there are resrictions to letters on submit part page. there are many parts that
use letters.
|
 |
| Author: | Hurt | | Posted: | Aug 23, 2019 17:15 | | Subject: | Re: Found torso with Lego logo that is not on BL | | Viewed: | 59 times | | Topic: | Catalog | |
|
| In Catalog, Hurt writes:
| | Hi everyone,
I found a torso with a Lego logo print on it's back - it's not on bricklink.
How should I add this torso? Is it an alternate? Or is it already in the catalog
and I can't find it?
It's this one (with Lego logo on the back):
|
Indeed, it seems to be a keychain figure, thanks both of you!
I was able to remove the head, so I didn't check further, but the legs are
stuck to the torso and if you look "closely" you can see a hole at the top of
the head and also at the top of the torso's neck (where the keychain was).
Thanks!
|
|
| Author: | Adjour | | Posted: | Aug 23, 2019 16:19 | | Subject: | Re: Found torso with Lego logo that is not on BL | | Viewed: | 64 times | | Topic: | Catalog | |
|
| In Catalog, Hurt writes:
| | Hi everyone,
I found a torso with a Lego logo print on it's back - it's not on bricklink.
How should I add this torso? Is it an alternate? Or is it already in the catalog
and I can't find it?
It's this one (with Lego logo on the back):
|
I think you'll find that the figure cannot be taken apart, looks like a keychain
to me
|
|
| Author: | Turez | | Posted: | Aug 23, 2019 16:00 | | Subject: | Re: Found torso with Lego logo that is not on BL | | Viewed: | 51 times | | Topic: | Catalog | |
|
| In Catalog, Hurt writes:
| | Hi everyone,
I found a torso with a Lego logo print on it's back - it's not on bricklink.
How should I add this torso? Is it an alternate? Or is it already in the catalog
and I can't find it?
It's this one (with Lego logo on the back):
|
Hi,
minifigures from key chains have the Lego logo on their backs. So you have probably
this one:
Regards,
Jonas
|
|
| Author: | Hurt | | Posted: | Aug 23, 2019 15:52 | | Subject: | Found torso with Lego logo that is not on BL | | Viewed: | 131 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi everyone,
I found a torso with a Lego logo print on it's back - it's not on bricklink.
How should I add this torso? Is it an alternate? Or is it already in the catalog
and I can't find it?
It's this one (with Lego logo on the back):
|
|
|
| Author: | Hurt | | Posted: | Aug 23, 2019 13:51 | | Subject: | Re: I think those 2 torsos are the same | | Viewed: | 28 times | | Topic: | Catalog | |
|
| In Catalog, axaday writes:
| | In Catalog, Hurt writes:
| | Oh ... honestly, didn't check before 
Thanks!
In Catalog, axaday writes:
| | In Catalog, Hurt writes:
| | The torsos in question:
From 2017:
From 2019:
[P=973pb3544c01]
I've added some items / pictures, but how can I request a merge of both entries?
|
Strangely enough, someone else already did. Just a bit before you.
https://www.bricklink.com/message.asp?ID=1154134
|
|
The pieces were submitted by Hygrotus and I and we both watch all the incoming
things in the catalog and neither of us noticed it. And then they sat there
for a couple of months and then two people noticed a couple hours apart.
|
Hehe
I was looking for the torso with goatleg, found the one from cty1022, then I
looked further for some legs (970c00pb0718) and noticed that the minifigure (njo355)
with those legs has the same torso, although BL says that the previous one only
appears for one minifigure (cty1022).
But at least they are both priced nearly the same, so merging them shouldn't
be an issue I guess
|
|
| Author: | axaday | | Posted: | Aug 23, 2019 13:41 | | Subject: | Re: I think those 2 torsos are the same | | Viewed: | 28 times | | Topic: | Catalog | |
|
| In Catalog, Hurt writes:
| | Oh ... honestly, didn't check before
Thanks!
In Catalog, axaday writes:
| | In Catalog, Hurt writes:
| | The torsos in question:
From 2017:
From 2019:
[P=973pb3544c01]
I've added some items / pictures, but how can I request a merge of both entries?
|
Strangely enough, someone else already did. Just a bit before you.
https://www.bricklink.com/message.asp?ID=1154134
|
|
The pieces were submitted by Hygrotus and I and we both watch all the incoming
things in the catalog and neither of us noticed it. And then they sat there
for a couple of months and then two people noticed a couple hours apart.
|
|
| Author: | Hurt | | Posted: | Aug 23, 2019 13:38 | | Subject: | Re: I think those 2 torsos are the same | | Viewed: | 30 times | | Topic: | Catalog | |
|
| Oh ... honestly, didn't check before
Thanks!
In Catalog, axaday writes:
| | In Catalog, Hurt writes:
| | The torsos in question:
From 2017:
From 2019:
[P=973pb3544c01]
I've added some items / pictures, but how can I request a merge of both entries?
|
Strangely enough, someone else already did. Just a bit before you.
https://www.bricklink.com/message.asp?ID=1154134
|
|
| Author: | Graham. | | Posted: | Aug 23, 2019 13:27 | | Subject: | Re: What do these mean? | | Viewed: | 19 times | | Topic: | Catalog | |
|
| | Thanks! |
|
| Author: | Hygrotus | | Posted: | Aug 23, 2019 13:22 | | Subject: | Re: What do these mean? | | Viewed: | 46 times | | Topic: | Catalog | |
|
| In Catalog, Thunor writes:
| | ... or signify.
Ive never even bothered before but now curiosity got me!
Symbols under image are either * or *! So what do they mean?
Thanks
|
Frequently asked question 
When you click on item photo "View in 3D" For example
https://www.bricklink.com/catalogItemPic.asp?P=3005&tab=I
there you have it
"Quick Help Tips:
1. The above large image serves only as an example of the item you selected.
2. The color of the above image might not be the same as the item that you're
browsing.
3. Click on the image to go back to the page you came from.
4. A small asterisk (*) below a thumbnail image indicates that there is a
large image (like the one you see on this page) available when you click on the
small thumbnail.
5. An exclamation mark (!) below a thumbnail image indicates that there is 3D
data available."
|
|
| Author: | Graham. | | Posted: | Aug 23, 2019 13:16 | | Subject: | What do these mean? | | Viewed: | 134 times | | Topic: | Catalog | | Status: | Open | |
|
| ... or signify.
Ive never even bothered before but now curiosity got me!
Symbols under image are either * or *! So what do they mean?
Thanks
|
| Author: | axaday | | Posted: | Aug 23, 2019 12:30 | | Subject: | Re: I think those 2 torsos are the same | | Viewed: | 33 times | | Topic: | Catalog | |
|
| In Catalog, Hurt writes:
| | The torsos in question:
From 2017:
From 2019:
[P=973pb3544c01]
I've added some items / pictures, but how can I request a merge of both entries?
|
Strangely enough, someone else already did. Just a bit before you.
https://www.bricklink.com/message.asp?ID=1154134
|
| Author: | Hurt | | Posted: | Aug 23, 2019 12:18 | | Subject: | I think those 2 torsos are the same | | Viewed: | 97 times | | Topic: | Catalog | | Status: | Open | |
|
| The torsos in question:
From 2017:
From 2019:
[P=973pb3544c01]
I've added some items / pictures, but how can I request a merge of both entries?
|
|
| Author: | Hygrotus | | Posted: | Aug 23, 2019 08:09 | | Subject: | Re: Resistance Pilot U-wing (sw0800) | | Viewed: | 35 times | | Topic: | Catalog | |
|
| In Catalog, Taszeuhl writes:
| | It just occured to me that the following minifigure:
Resistance Pilot U-wing (sw0800)
should be called something different. It's a Rogue One character, and the
U-Wing is a Rebel ship, so it's actually a Rebel pilot, not a Resistance
pilot. Not a huge deal, but changing the name is probably still a good idea.
|
Changed. Thanks for noticed.
|
|
| Author: | Taszeuhl | | Posted: | Aug 23, 2019 07:55 | | Subject: | Resistance Pilot U-wing (sw0800) | | Viewed: | 56 times | | Topic: | Catalog | | Status: | Open | |
|
| It just occured to me that the following minifigure:
Resistance Pilot U-wing (sw0800)
should be called something different. It's a Rogue One character, and the
U-Wing is a Rebel ship, so it's actually a Rebel pilot, not a Resistance
pilot. Not a huge deal, but changing the name is probably still a good idea.
|
|
| Author: | BeauBricks | | Posted: | Aug 21, 2019 10:17 | | Subject: | Re: Dark Gray Patio Umbrella Stand #4095 | | Viewed: | 35 times | | Topic: | Catalog | |
|
| In Help, carolannee writes:
| | They were included with the Limited Edition Super Chief sets:
http://www.peeron.com/inv/sets/10020-1
In Help, Lego_Friends writes:
| | I'm wondering if any of you have come across Dark Gray Patio Umbrella Stands?
I have 3 of them and they are either really good fakes or they are really Dark
Gray. The problem is Bricklink says they don't exist.
This is a picture of them on a Dark Gray 6x8 plate.
Anyone have any ideas?
thanks,
Eileen
|
|
I got these and have the regular edition
|
|
| Author: | tEoS | | Posted: | Aug 20, 2019 23:55 | | Subject: | Re: Dark Gray Patio Umbrella Stand #4095 | | Viewed: | 42 times | | Topic: | Catalog | |
|
| Here's a thread on Eurobricks about this train. There's mention of some
sets being packed with the wrong color bars, so maybe that was this piece.
Unfortunately, it was too long ago for me to remember.
https://www.eurobricks.com/forum/index.php?/forums/topic/53757-santa-fe-super-chief-limited-edition/
In Help, Lego_Friends writes:
| | In Help, carolannee writes:
|
| | So Bricklink doesn't list them? Only Peeron does? I just realized that after
I typed my last message.
|
|
|
| Author: | thewally | | Posted: | Aug 20, 2019 23:49 | | Subject: | Re: Dark Gray Patio Umbrella Stand #4095 | | Viewed: | 36 times | | Topic: | Catalog | |
|
| | Oops, and down in flames I go!! |
| Author: | tEoS | | Posted: | Aug 20, 2019 23:44 | | Subject: | Re: Dark Gray Patio Umbrella Stand #4095 | | Viewed: | 35 times | | Topic: | Catalog | |
|
| No, they are not these:[p=bb219]
In Help, thewally writes:
| | Hi, these are not actual LEGO pieces, they are simply packaging pins to hold
tracks together for shipping. They pin 4 or 6 tracks in a stack.
|
|
| Author: | thewally | | Posted: | Aug 20, 2019 23:36 | | Subject: | Re: Dark Gray Patio Umbrella Stand #4095 | | Viewed: | 39 times | | Topic: | Catalog | |
|
| Hi, these are not actual LEGO pieces, they are simply packaging pins to hold
tracks together for shipping. They pin 4 or 6 tracks in a stack.
|
|
| Author: | MusicCityBlocks | | Posted: | Aug 20, 2019 00:46 | | Subject: | Re: Dark Gray Patio Umbrella Stand #4095 | | Viewed: | 45 times | | Topic: | Catalog | |
|
| In Help, carolannee writes:
| | They were included with the Limited Edition Super Chief sets:
http://www.peeron.com/inv/sets/10020-1
In Help, Lego_Friends writes:
| | I'm wondering if any of you have come across Dark Gray Patio Umbrella Stands?
I have 3 of them and they are either really good fakes or they are really Dark
Gray. The problem is Bricklink says they don't exist.
This is a picture of them on a Dark Gray 6x8 plate.
Anyone have any ideas?
thanks,
Eileen
|
|
So Bricklink doesn't list them? Only Peeron does? I just realized that after
I typed my last message.
|
|
| Author: | MusicCityBlocks | | Posted: | Aug 20, 2019 00:44 | | Subject: | Re: Dark Gray Patio Umbrella Stand #4095 | | Viewed: | 51 times | | Topic: | Catalog | |
|
| In Help, carolannee writes:
| | They were included with the Limited Edition Super Chief sets:
http://www.peeron.com/inv/sets/10020-1
In Help, Lego_Friends writes:
| | I'm wondering if any of you have come across Dark Gray Patio Umbrella Stands?
I have 3 of them and they are either really good fakes or they are really Dark
Gray. The problem is Bricklink says they don't exist.
This is a picture of them on a Dark Gray 6x8 plate.
Anyone have any ideas?
thanks,
Eileen
|
|
Wow- thanks so much!!
I'm learning a lot tonight!!! I have that set personally so I better go put
these in there!! LOL
Thank you!
|
|
| Author: | carolannee | | Posted: | Aug 20, 2019 00:40 | | Subject: | Re: Dark Gray Patio Umbrella Stand #4095 | | Viewed: | 63 times | | Topic: | Catalog | |
|
| They were included with the Limited Edition Super Chief sets:
http://www.peeron.com/inv/sets/10020-1
In Help, Lego_Friends writes:
| | I'm wondering if any of you have come across Dark Gray Patio Umbrella Stands?
I have 3 of them and they are either really good fakes or they are really Dark
Gray. The problem is Bricklink says they don't exist.
This is a picture of them on a Dark Gray 6x8 plate.
Anyone have any ideas?
thanks,
Eileen
|
|
|
| Author: | MusicCityBlocks | | Posted: | Aug 20, 2019 00:22 | | Subject: | Dark Gray Patio Umbrella Stand #4095 | | Viewed: | 99 times | | Topic: | Catalog | | Status: | Open | |
|
| I'm wondering if any of you have come across Dark Gray Patio Umbrella Stands?
I have 3 of them and they are either really good fakes or they are really Dark
Gray. The problem is Bricklink says they don't exist.
This is a picture of them on a Dark Gray 6x8 plate.
Anyone have any ideas?
thanks,
Eileen
|
|
|
| Author: | Hygrotus | | Posted: | Aug 17, 2019 16:28 | | Subject: | Re: Counterparts for set 41312 | | Viewed: | 70 times | | Topic: | Catalog | |
|
| In Catalog, kreativsnail writes:
| | Here are some pix of 8 the stickered counterparts for set 41312. I want help
to get them submitted and approved for the catalog. I have pix of the other
ones also.
|
I answered in your other message
https://www.bricklink.com/message.asp?ID=1153310
So please add them.
|
|
| Author: | Hygrotus | | Posted: | Aug 17, 2019 16:26 | | Subject: | Re: Stickered counterparts | | Viewed: | 44 times | | Topic: | Catalog | |
|
| In Catalog, kreativsnail writes:
| | I am seeing more and more sets added without the stickered counterparts in the
inventory. I have many of these parts, and will gladly submit pix of them.
|
Yes please do so.
| | I am not quite sure if the submissions I made the other day were done correctly
or not, especially when it comes to what number I should assign to the part.
|
[p=87079pb619]
[p=87079pb620]
There was needed only small corrections in names as I remember
| | Here is another one, but I haven’t submitted it yet. For set 60173 :
4515pb057 ???? ( the highest number I see anywhere is 4515pb056)
Slope 10 6 x 8 with rusting sheet metal roof 48 sections pattern (Sticker) -
Set 60173
|
https://www.bricklink.com/catalogListOld.asp?pg=1&q=4515%2A&catLike=W&itemBrand=1000&v=1
exactly, first free number is 4515pb057
Please remember also about correct category, just look where other parts of this
type are
And one more advice, in describtion almost all words should beggin from capital
letter beside 'and', 'or', 'with' and other conjunction
those should have small all letters. So your description should look like this
"Slope 10 6 x 8 with Rusting Sheet Metal Roof 48 Sections Pattern (Sticker) -
Set 60173"
| |
I want to get this part listed. Unfortunately I don’t have the stickered parts
for the helicopter from this set to add them also.
|
You could also check this message where I tried to explain addition process of
stickered counterparts
https://www.bricklink.com/message.asp?ID=1085264
No many users add stickered parts so many are missing in inventory.
|
|
| Author: | kreativsnail | | Posted: | Aug 17, 2019 15:21 | | Subject: | Re: Counterparts for set 41312 | | Viewed: | 28 times | | Topic: | Catalog | |
|
| | Here are the other 2 stickered counterparts |
|
| Author: | kreativsnail | | Posted: | Aug 17, 2019 15:19 | | Subject: | Counterparts for set 41312 | | Viewed: | 53 times | | Topic: | Catalog | | Status: | Open | |
|
| Here are some pix of 8 the stickered counterparts for set 41312. I want help
to get them submitted and approved for the catalog. I have pix of the other
ones also.
|
|
|
| Author: | kreativsnail | | Posted: | Aug 17, 2019 15:03 | | Subject: | Stickered counterparts | | Viewed: | 45 times | | Topic: | Catalog | | Status: | Open | |
|
| I am seeing more and more sets added without the stickered counterparts in the
inventory. I have many of these parts, and will gladly submit pix of them.
I am not quite sure if the submissions I made the other day were done correctly
or not, especially when it comes to what number I should assign to the part.
Here is another one, but I haven’t submitted it yet. For set 60173 :
4515pb057 ???? ( the highest number I see anywhere is 4515pb056)
Slope 10 6 x 8 with rusting sheet metal roof 48 sections pattern (Sticker) -
Set 60173
I want to get this part listed. Unfortunately I don’t have the stickered parts
for the helicopter from this set to add them also.
|
|
|
| Author: | randyf | | Posted: | Aug 16, 2019 18:02 | | Subject: | Re: "White" color of part 93568pb001 | | Viewed: | 41 times | | Topic: | Catalog | |
|
| In Catalog, normann1974 writes:
| | According to BL, the color of the topping of is "white". Is this
just a loose color description or was it meant to indicate the correct color?
Because it's not white. It's more like Very Light Bluish Gray. Please
see attached picture of part with white, VLBG (shield), LBG and LG.
/Jan
|
It is white printed on dark plastic, so some of the plastic color is transmitted
through the paint, making it look less than white. However, the paint is definitely
white.
Cheers,
Randy
|
|
| Author: | normann1974 | | Posted: | Aug 16, 2019 17:38 | | Subject: | "White" color of part 93568pb001 | | Viewed: | 80 times | | Topic: | Catalog | | Status: | Open | |
|
| According to BL, the color of the topping of is "white". Is this
just a loose color description or was it meant to indicate the correct color?
Because it's not white. It's more like Very Light Bluish Gray. Please
see attached picture of part with white, VLBG (shield), LBG and LG.
/Jan
|
|
|
| Author: | nerdsforprez | | Posted: | Aug 15, 2019 04:23 | | Subject: | Re: inventory "pending approval" | | Viewed: | 39 times | | Topic: | Catalog | |
|
| TY!
In Catalog, randyf writes:
| | In Catalog, nerdsforprez writes:
| | I did a search, but couldn't find what I was looking for.
How long does it typically take to approve an inventory? 42099 has been in "pending
status" for several days now.
- Trevor
|
The inventory has not been completed by the submitter of it. When it is complete,
the inventory will most likely be approved in one to two days by either myself
or Paul.
Cheers,
Randy
|
|
|
| Author: | randyf | | Posted: | Aug 15, 2019 00:34 | | Subject: | Re: inventory "pending approval" | | Viewed: | 41 times | | Topic: | Catalog | |
|
| In Catalog, nerdsforprez writes:
| | I did a search, but couldn't find what I was looking for.
How long does it typically take to approve an inventory? 42099 has been in "pending
status" for several days now.
- Trevor
|
The inventory has not been completed by the submitter of it. When it is complete,
the inventory will most likely be approved in one to two days by either myself
or Paul.
Cheers,
Randy
|
|
| Author: | nerdsforprez | | Posted: | Aug 15, 2019 00:15 | | Subject: | inventory "pending approval" | | Viewed: | 72 times | | Topic: | Catalog | | Status: | Open | |
|
| I did a search, but couldn't find what I was looking for.
How long does it typically take to approve an inventory? 42099 has been in "pending
status" for several days now.
- Trevor
|
|
| Author: | normann1974 | | Posted: | Aug 14, 2019 17:55 | | Subject: | Questions for Nordic version of G31314 | | Viewed: | 83 times | | Topic: | Catalog | | Status: | Open | |
|
| I'm about to create the Danish/Norwegian version of [G=G31314] in the BL
catalogue.
But I have one question: In G31314, the 14 curved and 6 straight road sections
are claimed to be identical, but the Nordic versions look different. They contain
studs on the road, and all road sections have subtle differences (see example
of two curved sections in attached image). They may be hard to differentiate
by users, so should I just create one part and maybe have a note on it that inform
of the differences, or should every different part be created?
/Jan
|
|
|
|
| Author: | Teup | | Posted: | Aug 13, 2019 13:24 | | Subject: | Re: Why can't I enlarge pics anymore? | | Viewed: | 58 times | | Topic: | Catalog | |
|
| In Catalog, QA_Rachel writes:
| | In Catalog, firestar246 writes:
| | So you used to be able to click on the picture of a piece in the catalog, sort
of a quick view. You'd see the years it was made, any sets/minifigures the
piece was in, etc. You all know what I'm talking about. Well, a few days
ago I couldn't do it anymore. I've tried three different devices.
Why would they make such a horrible change for? I rely on that heavily when listing
minifigure parts to make sure I have the correct listing. This is going to make
this job twice as long now.
|
The zoom-in bug was fixed a few weeks ago but it seems that a recent site update
may have reverted the fix. I'll forward the information to someone on our
development team to take a look. I'll let you know once we've resolved
the issue.
Thank you!
|
|
|
|
| Author: | QA_Rachel | | Posted: | Aug 13, 2019 12:33 | | Subject: | Re: Why can't I enlarge pics anymore? | | Viewed: | 77 times | | Topic: | Catalog | |
|
| In Catalog, firestar246 writes:
| | So you used to be able to click on the picture of a piece in the catalog, sort
of a quick view. You'd see the years it was made, any sets/minifigures the
piece was in, etc. You all know what I'm talking about. Well, a few days
ago I couldn't do it anymore. I've tried three different devices.
Why would they make such a horrible change for? I rely on that heavily when listing
minifigure parts to make sure I have the correct listing. This is going to make
this job twice as long now.
|
The zoom-in bug was fixed a few weeks ago but it seems that a recent site update
may have reverted the fix. I'll forward the information to someone on our
development team to take a look. I'll let you know once we've resolved
the issue.
Thank you!
|
|
| Author: | pitz8008 | | Posted: | Aug 13, 2019 11:36 | | Subject: | Re: Why can't I enlarge pics anymore? | | Viewed: | 40 times | | Topic: | Catalog | |
|
| In Catalog, firestar246 writes:
| | So you used to be able to click on the picture of a piece in the catalog, sort
of a quick view. You'd see the years it was made, any sets/minifigures the
piece was in, etc. You all know what I'm talking about. Well, a few days
ago I couldn't do it anymore. I've tried three different devices.
Why would they make such a horrible change for? I rely on that heavily when listing
minifigure parts to make sure I have the correct listing. This is going to make
this job twice as long now.
|
Doesn't work for me either. This happened a few weeks ago. Then all of a
sudden I could enlarge them again. Then a couple days ago, it stopped letting
me enlarge them again. A big pain if you ask me.
|
|
| Author: | Hypersync | | Posted: | Aug 13, 2019 09:33 | | Subject: | Re: Why can't I enlarge pics anymore? | | Viewed: | 38 times | | Topic: | Catalog | |
|
| In Catalog, qwertyboy writes:
| | In Catalog, firestar246 writes:
| | So you used to be able to click on the picture of a piece in the catalog, sort
of a quick view. You'd see the years it was made, any sets/minifigures the
piece was in, etc. You all know what I'm talking about. Well, a few days
ago I couldn't do it anymore. I've tried three different devices.
Why would they make such a horrible change for? I rely on that heavily when listing
minifigure parts to make sure I have the correct listing. This is going to make
this job twice as long now.
|
I checked the HTML source for when you go through "Market" - "Parts" - "[some-category]"
and there is no "onclick" or anchor or anything, so this is not a browser issue.
By poking around I fond you can get the old behaviour back by changing the URL
of the page. For instance, when browsing the "Accessory, Human Tool" category,
it lands on the following URL:
https://www.bricklink.com/catalogList.asp?catType=P&catString=990&itemBrand=1000
Now manually change the URL to read as follows (add "Old" in there):
https://www.bricklink.com/catalogListOld.asp?catType=P&catString=990&itemBrand=1000
Extremely clumsy, but if you are really needing large pics on those pages.
Niek.
|
Thank You Sooooooo Much. Life Saver!
|
|
| Author: | randyf | | Posted: | Aug 12, 2019 11:16 | | Subject: | Re: Elements Exclusive to BaM | | Viewed: | 45 times | | Topic: | Catalog | |
|
| In Catalog, zzed writes:
| | Well now I want the wizard hat with hair.
|
| | Isn't the black wizard hat # 17349 from the Rise of Voldemort set?
|
Yes.
| | I can't tell if the one in your photo is black.
|
It looks like Dark Blue with stars on it.
Cheers,
Randy
|
|
| Author: | qwertyboy | | Posted: | Aug 12, 2019 10:31 | | Subject: | Re: Why can't I enlarge pics anymore? | | Viewed: | 45 times | | Topic: | Catalog | |
|
| In Catalog, firestar246 writes:
| | So you used to be able to click on the picture of a piece in the catalog, sort
of a quick view. You'd see the years it was made, any sets/minifigures the
piece was in, etc. You all know what I'm talking about. Well, a few days
ago I couldn't do it anymore. I've tried three different devices.
Why would they make such a horrible change for? I rely on that heavily when listing
minifigure parts to make sure I have the correct listing. This is going to make
this job twice as long now.
|
I checked the HTML source for when you go through "Market" - "Parts" - "[some-category]"
and there is no "onclick" or anchor or anything, so this is not a browser issue.
By poking around I fond you can get the old behaviour back by changing the URL
of the page. For instance, when browsing the "Accessory, Human Tool" category,
it lands on the following URL:
https://www.bricklink.com/catalogList.asp?catType=P&catString=990&itemBrand=1000
Now manually change the URL to read as follows (add "Old" in there):
https://www.bricklink.com/catalogListOld.asp?catType=P&catString=990&itemBrand=1000
Extremely clumsy, but if you are really needing large pics on those pages.
Niek.
|
|
| Author: | jennnifer | | Posted: | Aug 12, 2019 09:45 | | Subject: | Re: having trouble clicking on pictures of items | | Viewed: | 32 times | | Topic: | Catalog | |
|
| In Catalog, jjoosephhh writes:
| | when i try to click on a image to look at it and know what characters are in
the set it doesn't allow me to.. Does anyone else have this problem?? more
context images in the catalog or thumbnail
|
https://www.bricklink.com/message.asp?ID=1152248
|
|
| Author: | Miro78 | | Posted: | Aug 12, 2019 08:44 | | Subject: | Re: 4460 a/b: wrong height | | Viewed: | 40 times | | Topic: | Catalog | |
|
| In Catalog, WrefordBrown writes:
| | In Catalog, JusTiCe8 writes:
| | Hi,
Looks like this parts:
is taller than described as it is 4 studs high instead of 3 unless there is a
way to measure height I don't know.
Fortunately, there is no 3 studs high slope and I believe any MOCers using the
part just call it by its name and there would be no issue when building.
Strangely, part and all its variants looks like to be also 4 studs
high and not 3 (last pic clearly shows the same aspect ratio as 4460).
By the way 3684 is not marked for deletion yet.
Where was the issue ? "It's not you it's us" or just me ?
Thanks.
|
I used to think this until I found Tom Alphin's lego ruler and sorting tool:
http://tomalphin.com/2014/02/lego-ruler-and-sorting-tool.html
One stud is 8mm wide but a plate is 3.2mm high, therefore the size of a 1x1 brick
is 8mm x 8mm x 9.8mm. I have Tom's guide printed and laminated and reckon
that it has saved me a load of time while sorting!
|
Very handy. Thanks for sharing.
Miro
|
|
| Author: | DamoB | | Posted: | Aug 12, 2019 08:20 | | Subject: | Re: 4460 a/b: wrong height | | Viewed: | 39 times | | Topic: | Catalog | |
|
| In Catalog, JusTiCe8 writes:
| | Hi,
Looks like this parts:
is taller than described as it is 4 studs high instead of 3 unless there is a
way to measure height I don't know.
Fortunately, there is no 3 studs high slope and I believe any MOCers using the
part just call it by its name and there would be no issue when building.
Strangely, part and all its variants looks like to be also 4 studs
high and not 3 (last pic clearly shows the same aspect ratio as 4460).
By the way 3684 is not marked for deletion yet.
Where was the issue ? "It's not you it's us" or just me ?
Thanks.
|
I used to think this until I found Tom Alphin's lego ruler and sorting tool:
http://tomalphin.com/2014/02/lego-ruler-and-sorting-tool.html
One stud is 8mm wide but a plate is 3.2mm high, therefore the size of a 1x1 brick
is 8mm x 8mm x 9.8mm. I have Tom's guide printed and laminated and reckon
that it has saved me a load of time while sorting!
|
|
| Author: | zzed | | Posted: | Aug 12, 2019 07:29 | | Subject: | Re: Elements Exclusive to BaM | | Viewed: | 41 times | | Topic: | Catalog | |
|
| Well now I want the wizard hat with hair. Isn't the black wizard hat
# 17349 from the Rise of Voldemort set? I can't tell if the one in your
photo is black.
|
|
| Author: | anathema | | Posted: | Aug 12, 2019 05:05 | | Subject: | Re: Why can't I enlarge pics anymore? | | Viewed: | 35 times | | Topic: | Catalog | |
|
| In Catalog, firestar246 writes:
| | So you used to be able to click on the picture of a piece in the catalog, sort
of a quick view. You'd see the years it was made, any sets/minifigures the
piece was in, etc. You all know what I'm talking about. Well, a few days
ago I couldn't do it anymore. I've tried three different devices.
Why would they make such a horrible change for? I rely on that heavily when listing
minifigure parts to make sure I have the correct listing. This is going to make
this job twice as long now.
|
It's been broken for weeks. It doesn't affect all pages, which may be
why some people are reporting the issue and others are not.
It's not browser or OS related so far as I can tell - I've tried three
different browsers on two different OSes and three different computers.
The 'add to wanted list' links are also broken randomly.
|
|
| Author: | anathema | | Posted: | Aug 12, 2019 05:03 | | Subject: | Re: having trouble clicking on pictures of items | | Viewed: | 21 times | | Topic: | Catalog | |
|
| In Catalog, jjoosephhh writes:
| | when i try to click on a image to look at it and know what characters are in
the set it doesn't allow me to.. Does anyone else have this problem?? more
context images in the catalog or thumbnail
|
It's been broken for a while; there's another thread from a few days
ago about the issue, and I reported it to the helpdesk weeks ago.
The 'Add to wanted list' links are broken in a lot of places too.
|
|
| Author: | jjoosephhh | | Posted: | Aug 12, 2019 03:11 | | Subject: | having trouble clicking on pictures of items | | Viewed: | 40 times | | Topic: | Catalog | | Status: | Open | |
|
| when i try to click on a image to look at it and know what characters are in
the set it doesn't allow me to.. Does anyone else have this problem?? more
context images in the catalog or thumbnail
|
|
| Author: | BeauBricks | | Posted: | Aug 11, 2019 17:21 | | Subject: | Re: Elements Exclusive to BaM | | Viewed: | 35 times | | Topic: | Catalog | |
|
| In Catalog, Hygrotus writes:
| | In Catalog, yorbrick writes:
| | In Catalog, Hygrotus writes:
| | In Catalog, yorbrick writes:
| | In Catalog, Hygrotus writes:
| | In Catalog, constructibles writes:
| | Just to add to the never-ending "identify this part" questions, it's now
been semi-officially confirmed that LEGO has created exclusive elements for the
BaM (Build a Minifgure) bins in LBR stores. I'm sure this will give more
people headaches for authenticating parts, since they will not appear in any
inventories. Looks interesting though, and I hope they keep introducing new
elements.
|
From month ago
https://www.promobricks.de/lego-store-neuheiten-minifigur-station/83292
Some of them are alrady in the catalog
|
That one isn't in the BAM. The BAM versions I have seen all come in a gloveless
form and the buyer adds the glove to it.
|
Is it possible that in German or USA LEGO Brand stores it is sell with glove?
|
I assume the boxes they come in are the same. All the ones I have seen in the
UK have been without glove. Of course, staff or other customers could add the
gloves then leave the assembly.
|
We don't have LEGO Brand Store in Poland so no Pick a Brick or Buil a
Minifigure and I have no idea how it looks like.
|
I got 5 new ones from the boxes in the storage at US Lego store. They are supposed
to have the glove, but most people rip it off and put them on another figure.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
USA, Colorado
Austria, Wien
Germany, Niedersachsen
Poland, w. Wielkopolskie
Canada, Quebec
Netherlands, Zuid-Holland
Australia, Australian Capital Territory
)
)
)
)
)
)
)
)
)
)
Denmark
United Kingdom, England
