Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | paulvdb  | | Posted: | Jan 20, 2021 05:36 | | Subject: | Re: Inventory Change Request for Set 379-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | In Inventories Requests, paulvdb writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Change {3 to 4} Part Green 3741 Plant Flower Stem
* Change {1 to 2} Part Red 3742c01 Plant Flower Small, 4 on Sprue
|
Source? Images of the back of the box do show five red flowers in alternate models
which would require a second sprue, but I don't think there was a 4th flower
stem in any of them. But I would need higher resolution images to be sure of
that.
|
I have received two sets of photos from sets with box opened but the content
claimed to be
1) new with European box
2) second one in mint condition with origianl parts: Canadian box
The following parts appear in both copies but not on the inventory
1) four black instead of three
2) Four stems instead of three
3) seven instead of six
4) two instead of one
[p=3742c01,5]
5) two instead of one
On only the first copy, the quantity of these parts is different than what inventory
shows.
6) three instead of two
7) 13 instead of 12
There is a model on the back of the box. On one side of the road, there is one
stem and on the other side, there are three stems. See photo attached.
If we check the photos of the main model, the stems appear in different positions
so this is tricky. On the other hand, for set 6372, there was only one alternate
model on which an extra stem appear.
https://www.bricklink.com/message.asp?ID=1232966
|
The images at the bottom right and top left do appear to show the same model,
but with different orientation of the bus stop sign and different positioning
of the minifigures. It was common for box art photos in that era to also show
different positioning of flowers so we can't be sure that all four flower
stems were actually used.
I'd prefer to add it to the inventory as an extra item because this is a
part that usually comes with an extra. Not in many inventories from that era
but that is probably because of lack of sealed set verifications and not because
they were not actually included in the sets.
As far as the other additional parts are concerned, they might be used in the
alternate models. But it would require some reverse engineering of those models
to figure out if any of them could not be built with the parts that are currently
included in the inventory as regular items.
|
 |
| Author: | SezaR | | Posted: | Jan 20, 2021 03:46 | | Subject: | Re: Inventory Change Request for Set 379-1 | | Viewed: | 32 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Change {3 to 4} Part Green 3741 Plant Flower Stem
* Change {1 to 2} Part Red 3742c01 Plant Flower Small, 4 on Sprue
|
Source? Images of the back of the box do show five red flowers in alternate models
which would require a second sprue, but I don't think there was a 4th flower
stem in any of them. But I would need higher resolution images to be sure of
that.
|
I have received two sets of photos from sets with box opened but the content
claimed to be
1) new with European box
2) second one in mint condition with origianl parts: Canadian box
The following parts appear in both copies but not on the inventory
1) four black instead of three
2) Four stems instead of three
3) seven instead of six
4) two instead of one
[p=3742c01,5]
5) two instead of one
On only the first copy, the quantity of these parts is different than what inventory
shows.
6) three instead of two
7) 13 instead of 12
There is a model on the back of the box. On one side of the road, there is one
stem and on the other side, there are three stems. See photo attached.
If we check the photos of the main model, the stems appear in different positions
so this is tricky. On the other hand, for set 6372, there was only one alternate
model on which an extra stem appear.
https://www.bricklink.com/message.asp?ID=1232966
|
|
|
| Author: | randyf | | Posted: | Jan 20, 2021 02:41 | | Subject: | Inventory Change Request for Minifig mar0002 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
From my son's set which was purchased new and not mixed with any other sets.
|
|
| Author: | randyf | | Posted: | Jan 20, 2021 02:38 | | Subject: | Inventory Change Request for Set 72005-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
From sealed set contents.
|
|
| Author: | randyf | | Posted: | Jan 20, 2021 02:34 | | Subject: | Inventory Change Request for Set 60264-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Red {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
From my son's set which was purchased new and not mixed with any other sets.
|
|
| Author: | randyf | | Posted: | Jan 20, 2021 02:30 | | Subject: | Inventory Change Request for Set 2000719-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
From sealed set contents.
|
|
| Author: | randyf | | Posted: | Jan 20, 2021 02:21 | | Subject: | Inventory Change Request for Set 71369-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
From my son's set which was purchased new and not mixed with any other sets.
|
|
| Author: | axaday | | Posted: | Jan 19, 2021 21:13 | | Subject: | Inventory Change Request for Set 71721-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 14 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
From my personal collection
|
|
| Author: | axaday | | Posted: | Jan 19, 2021 21:12 | | Subject: | Inventory Change Request for Set 10224-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
From my personal collection
|
|
| Author: | axaday | | Posted: | Jan 19, 2021 21:11 | | Subject: | Inventory Change Request for Set 70593-1 | | Viewed: | 11 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
From my personal collection
|
|
| Author: | axaday | | Posted: | Jan 19, 2021 21:11 | | Subject: | Inventory Change Request for Set 70131-1 | | Viewed: | 9 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
From my personal collection
|
|
| Author: | axaday | | Posted: | Jan 19, 2021 21:10 | | Subject: | Inventory Change Request for Set 75952-1 | | Viewed: | 10 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
From my personal collection
|
|
| Author: | axaday | | Posted: | Jan 19, 2021 21:09 | | Subject: | Inventory Change Request for Set 41073-1 | | Viewed: | 11 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
From my personal collection
|
|
| Author: | axaday | | Posted: | Jan 19, 2021 21:08 | | Subject: | Inventory Change Request for Set 75212-1 | | Viewed: | 11 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
From my personal collection
|
|
| Author: | axaday | | Posted: | Jan 19, 2021 21:07 | | Subject: | Inventory Change Request for Set 41192-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
From my personal collection
|
|
| Author: | axaday | | Posted: | Jan 19, 2021 21:06 | | Subject: | Inventory Change Request for Set 76126-1 | | Viewed: | 13 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 6 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
From my personal collection
|
|
| Author: | axaday | | Posted: | Jan 19, 2021 21:00 | | Subject: | Inventory Change Request for Set 41184-1 | | Viewed: | 12 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
From my collection
|
|
| Author: | axaday | | Posted: | Jan 19, 2021 20:59 | | Subject: | Inventory Change Request for Set 71719-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Red {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
From my collection
|
|
| Author: | paulvdb | | Posted: | Jan 19, 2021 11:54 | | Subject: | Re: Inventory Change Request for Set 379-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Change {3 to 4} Part Green 3741 Plant Flower Stem
* Change {1 to 2} Part Red 3742c01 Plant Flower Small, 4 on Sprue
|
Source? Images of the back of the box do show five red flowers in alternate models
which would require a second sprue, but I don't think there was a 4th flower
stem in any of them. But I would need higher resolution images to be sure of
that.
|
|
| Author: | Roxyncz | | Posted: | Jan 19, 2021 10:30 | | Subject: | Re: Inventory Change Request for Set 71721-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
|
| 2X
2335pb222 Flag 2 x 2 Square with Black Symbol on Tan Background Pattern on Both
Sides (Stickers) - Set 71721
|
| Author: | SylvainLS | | Posted: | Jan 19, 2021 10:17 | | Subject: | Re: Inventory Change Request for Set 10226-1 | | Viewed: | 14 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| | […]
| | Source: Set from my personal collection which was bought new and not mixed with other parts. Plus this set needs the variant with round hole.
|
|
Unrelated but I just saw on the picture the bar shows little marks, about exactly
where the white paint would go for the magic wand version. Curious.
|
|
| Author: | Roxyncz | | Posted: | Jan 19, 2021 10:06 | | Subject: | Inventory Change Request for Set 71721-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 2335pb222 Dark Tan Flag 2 x 2 Square with Black Symbol on Tan Background Pattern on Both Sides (Stickers) - Set 71721 (Counterpart)
* Add 2 Part 33909pb007 Light Bluish Gray Tile, Modified 2 x 2 with Studs on Edge with Spiral and Cracks Pattern (Sticker) - Sets 71721 (Counterpart)
|
|
| Author: | Turez | | Posted: | Jan 19, 2021 09:29 | | Subject: | Re: Inventory Change Request for Set 10226-1 | | Viewed: | 14 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| | Please make changes to the following inventory:
* Change 6 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Source: Set from my personal collection which was bought new and not mixed with other parts. Plus this set needs the variant with round hole.
|
|
|
|
| Author: | Turez | | Posted: | Jan 19, 2021 09:29 | | Subject: | Inventory Change Request for Set 10226-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 6 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Source: Set from my personal collection which was bought new and not mixed with other parts. Plus this set needs the variant with round hole.
|
|
| Author: | Turez | | Posted: | Jan 19, 2021 09:28 | | Subject: | Inventory Change Request for Set 4184-1 | | Viewed: | 11 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 24 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
* Change 2 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 2 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
Comments from Submitter:
Source: Set from my personal collection which was bought new and not mixed with other parts.
|
|
| Author: | Turez | | Posted: | Jan 19, 2021 09:28 | | Subject: | Inventory Change Request for Set 7682-1 | | Viewed: | 12 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Source: Set from my personal collection which was bought new and not mixed with other parts.
|
|
| Author: | Turez | | Posted: | Jan 19, 2021 09:28 | | Subject: | Inventory Change Request for Set 42054-1 | | Viewed: | 10 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Source: Set from my personal collection which was bought new and not mixed with other parts.
|
|
| Author: | Turez | | Posted: | Jan 19, 2021 09:28 | | Subject: | Inventory Change Request for Set 42042-1 | | Viewed: | 11 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Source: Set from my personal collection which was bought new and not mixed with other parts.
|
|
| Author: | Turez | | Posted: | Jan 19, 2021 08:44 | | Subject: | Inventory Change Request for Set 4404-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Source: Set from my personal collection which was bought new and not mixed with other 6628 parts.
|
|
| Author: | Turez | | Posted: | Jan 19, 2021 08:43 | | Subject: | Inventory Change Request for Set 8269-1 | | Viewed: | 11 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 7 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628b Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Squared Pin Hole}
Comments from Submitter:
Source: Set from my personal collection which was bought new and not mixed with other 6628 parts.
|
|
| Author: | Turez | | Posted: | Jan 19, 2021 08:43 | | Subject: | Inventory Change Request for Set 8257-1 | | Viewed: | 11 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628b Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Squared Pin Hole}
Comments from Submitter:
Source: Set from my personal collection which was bought new and not mixed with other parts.
|
|
| Author: | Turez | | Posted: | Jan 19, 2021 08:42 | | Subject: | Inventory Change Request for Set 8226-1 | | Viewed: | 10 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628b Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Squared Pin Hole}
Comments from Submitter:
Source: Set from my personal collection which was bought new and not mixed with other 6628 parts.
|
|
| Author: | Turez | | Posted: | Jan 19, 2021 08:42 | | Subject: | Inventory Change Request for Set 10277-1 | | Viewed: | 12 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
* Change 8 Part Red {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Checked in my set which was used to build the inventory.
|
|
| Author: | Turez | | Posted: | Jan 19, 2021 08:41 | | Subject: | Inventory Change Request for Set 10262-1 | | Viewed: | 13 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Source: Set from my personal collection which was bought new and not mixed with other parts.
|
|
| Author: | Turez | | Posted: | Jan 19, 2021 07:41 | | Subject: | Inventory Change Request for Set 4565-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628b Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Squared Pin Hole}
Comments from Submitter:
Source: Set from my personal collection which was bought new and not mixed with other parts (at least not with other 6628 parts).
|
|
| Author: | Turez | | Posted: | Jan 19, 2021 07:41 | | Subject: | Inventory Change Request for Set 8457-1 | | Viewed: | 13 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628b Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Squared Pin Hole}
Comments from Submitter:
Source: Set from my personal collection which was bought new and not mixed with other parts (at least not with other 6628 parts).
|
|
| Author: | Turez | | Posted: | Jan 19, 2021 07:40 | | Subject: | Inventory Change Request for Set 6763-1 | | Viewed: | 13 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628b Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Squared Pin Hole}
Comments from Submitter:
Source: Set from my personal collection which was bought new and not mixed with other parts (at least not with other 6628 parts).
|
|
| Author: | Turez | | Posted: | Jan 19, 2021 07:40 | | Subject: | Inventory Change Request for Set 7418-1 | | Viewed: | 10 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Source: Set from my personal collection which was bought new and not mixed with other parts (at least not with other 6628 parts).
|
|
| Author: | Turez | | Posted: | Jan 19, 2021 07:39 | | Subject: | Inventory Change Request for Set 7347-1 | | Viewed: | 12 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Source: Set from my personal collection which was bought new and not mixed with other parts.
|
|
| Author: | Turez | | Posted: | Jan 19, 2021 07:31 | | Subject: | Inventory Change Request for Set 60262-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Checked in my set which was used to build the inventory.
|
|
| Author: | Turez | | Posted: | Jan 19, 2021 07:30 | | Subject: | Inventory Change Request for Set 60245-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Checked in my set which was used to build the inventory.
|
|
| Author: | Turez | | Posted: | Jan 19, 2021 07:30 | | Subject: | Inventory Change Request for Set 60243-1 | | Viewed: | 9 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Checked in my set which was used to build the inventory.
|
|
| Author: | Turez | | Posted: | Jan 19, 2021 07:30 | | Subject: | Inventory Change Request for Set 71713-1 | | Viewed: | 9 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Checked in my set which was used to build the inventory.
|
|
| Author: | Turez | | Posted: | Jan 19, 2021 07:30 | | Subject: | Inventory Change Request for Set 71711-1 | | Viewed: | 11 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Checked in my set which was used to build the inventory.
|
|
| Author: | BricksThatStick | | Posted: | Jan 18, 2021 16:34 | | Subject: | Re: Inventory Change Request for Set 8062-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, legolex76 writes:
| | In Inventories Requests, BricksThatStick writes:
| | In Inventories Requests, legolex76 writes:
| | Please make changes to the following inventory:
* Change {4 to 6} Part Yellow 2730 Technic, Brick 1 x 10 with Holes
Comments from Submitter:
Hi,
I am currently going through the actual set and instruction manual which I have had since new and noticed this inv. entry is incorrect.
|
Did you build one of the specific models in the instructions that needs 6 of
these? Maybe I missed it but I don't see 6 being used anywhere.
Thanks for any extra info.
Paul.
Hi Paul,
I just checked and you are right, sorry. After finishing the helicopter I mistook two partially obscured 1x12 bricks for 1x10 bricks.
Sorry for the inconvenience and thanks for all the good work you guys are doing for Bricklink. It is a huge asset for the community.
Best regards,
Alex
|
|
Thanks for letting me know.
If you spot anything else in the future at least now you've had some practice
with filling in the form 
| | | | | | I hope I have filled out the form correctly. In total there are 6 and not 4 of part 2730 in yellow.
Regards,
Alex
|
|
|
|
|
| Author: | legolex76 | | Posted: | Jan 18, 2021 16:30 | | Subject: | Re: Inventory Change Request for Set 8062-1 | | Viewed: | 15 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, BricksThatStick writes:
| | In Inventories Requests, legolex76 writes:
| | Please make changes to the following inventory:
* Change {4 to 6} Part Yellow 2730 Technic, Brick 1 x 10 with Holes
Comments from Submitter:
Hi,
I am currently going through the actual set and instruction manual which I have had since new and noticed this inv. entry is incorrect.
|
Did you build one of the specific models in the instructions that needs 6 of
these? Maybe I missed it but I don't see 6 being used anywhere.
Thanks for any extra info.
Paul.
Hi Paul,
I just checked and you are right, sorry. After finishing the helicopter I mistook two partially obscured 1x12 bricks for 1x10 bricks.
Sorry for the inconvenience and thanks for all the good work you guys are doing for Bricklink. It is a huge asset for the community.
Best regards,
Alex
| | I hope I have filled out the form correctly. In total there are 6 and not 4 of part 2730 in yellow.
Regards,
Alex
|
|
|
|
| Author: | Turez | | Posted: | Jan 18, 2021 16:05 | | Subject: | Inventory Change Request for Set 10041-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 4032 Black Plate, Round 2 x 2 with Axle Hole (match ID 1)
* Change 2 Part Black 4032b Plate, Round 2 x 2 with Axle Hole (x Shape) {Regular to Alternate} {match ID 0 to 1}
Comments from Submitter:
My set which was bought new and not mixed with any other parts has the + type. Batch code: 0213.
|
|
| Author: | BricksThatStick | | Posted: | Jan 18, 2021 15:56 | | Subject: | Re: Inventory Change Request for Set 60023-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, InsanityBeckonz writes:
| | Please make changes to the following inventory:
* Add 2 Part 3069bpb111 White Tile 1 x 2 with Groove with 'POLICE' White on Blue Background Thick Font Pattern (Sticker) - Sets 7235-2 / 7236-2 / 7744 (Counterpart)
|
This is a slightly different design - the POLICE takes up more of the blue background/starts
nearer the edge in set 60023 (see image below)
Am open to other opinions though...
|
|
|
| Author: | M.Boss | | Posted: | Jan 18, 2021 13:43 | | Subject: | Inventory Change Request for Set 10221-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3245cpb135 Light Bluish Gray Brick 1 x 2 x 2 with Inside Stud Holder with Starry Window Pattern (Sticker) - Set 10221 (Counterpart)
* Add 2 Part 3245cpb136 Light Bluish Gray Brick 1 x 2 x 2 with Inside Stud Holder with SW 4 Wall Panels Pattern (Sticker) - Set 10221 (Counterpart)
* Add 2 Part 3245cpb137 Light Bluish Gray Brick 1 x 2 x 2 with Inside Stud Holder with SW Control Panel, Red and White Stripes Pattern (Sticker) - Set 10221 (Counterpart)
* Add 2 Part 3245cpb138 Light Bluish Gray Brick 1 x 2 x 2 with Inside Stud Holder with SW Control Panel and White Stripes Pattern (Sticker) - Set 10221 (Counterpart)
* Add 4 Part 3245cpb139 Light Bluish Gray Brick 1 x 2 x 2 with Inside Stud Holder with SW Control Panel and Gray Stripes Pattern (Sticker) - Set 10221 (Counterpart)
* Add 1 Part 3245cpb140L Light Bluish Gray Brick 1 x 2 x 2 with Inside Stud Holder with SW Bridge Door Pattern Model Left Side (Sticker) - Set 10221 (Counterpart)
* Add 1 Part 3245cpb140R Light Bluish Gray Brick 1 x 2 x 2 with Inside Stud Holder with SW Bridge Door Pattern Model Right Side (Sticker) - Set 10221 (Counterpart)
* Add 1 Part 90498pb19 Black Tile 8 x 16 with Bottom Tubes with Executor Super Star Destroyer Pattern (Sticker) - Set 10221 (Counterpart)
* Add 1 Part 4460bpb003L Dark Bluish Gray Slope 75 2 x 1 x 3 - Hollow Stud with Starry Window Model Left Side Pattern (Sticker) - Set 10221 (Counterpart)
* Add 1 Part 4460bpb003R Dark Bluish Gray Slope 75 2 x 1 x 3 - Hollow Stud with Starry Window Model Right Side Pattern (Sticker) - Set 10221 (Counterpart)
* Add 5 Part 85984pb294 Dark Bluish Gray Slope 30 1 x 2 x 2/3 with SW Control Panel, Blue, Red and White Buttons Pattern (Sticker) - Set 10221 (Counterpart)
* Add 5 Part 85984pb293 Dark Bluish Gray Slope 30 1 x 2 x 2/3 with SW Control Panel, White Stripe, Red and Blue Buttons Pattern (Sticker) - Set 10221 (Counterpart)
Comments from Submitter:
Counterparts for the stickered parts
|
|
| Author: | Roxyncz | | Posted: | Jan 18, 2021 11:44 | | Subject: | Inventory Change Request for Set 60141-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4162pb232 Yellow Tile 1 x 8 with 'POLICE' and Black and Yellow Danger Stripes Pattern (Sticker) - Set 60141 (Counterpart)
|
| Author: | InsanityBeckonz | | Posted: | Jan 18, 2021 10:27 | | Subject: | Inventory Change Request for Set 60023-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 3069bpb111 White Tile 1 x 2 with Groove with 'POLICE' White on Blue Background Thick Font Pattern (Sticker) - Sets 7235-2 / 7236-2 / 7744 (Counterpart)
|
|
| Author: | brk0kro | | Posted: | Jan 18, 2021 09:58 | | Subject: | Inventory Change Request for Set 1736-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4073 Trans-Dark Blue Plate, Round 1 x 1 (Extra)
* Add 1 Part 4073 Trans-Green Plate, Round 1 x 1 (Extra)
Comments from Submitter:
Hi,
This set has two extra items which aren't listed:
Trans-Dark Blue Plate, Round 1 x 1
Trans-Green Plate, Round 1 x 1
I have new set in open box, still sealed in plastic wrapping. I can send picture if needed.
Cheers
|
|
| Author: | axaday | | Posted: | Jan 18, 2021 06:24 | | Subject: | Re: Inventory Change Request for Set 10041-1 | | Viewed: | 12 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Change 2 Part Black {4032 Plate, Round 2 x 2 with Axle Hole to 4032b Plate, Round 2 x 2 with Axle Hole (x Shape)}
* Change 1 Part Black {x77a String, Cord Thin (Undetermined Length Type) to x77ac122 String, Cord Thin 122cm}
|
|
|
|
| Author: | axaday | | Posted: | Jan 18, 2021 06:22 | | Subject: | Inventory Change Request for Set 10041-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {4032 Plate, Round 2 x 2 with Axle Hole to 4032b Plate, Round 2 x 2 with Axle Hole (x Shape)}
* Change 1 Part Black {x77a String, Cord Thin (Undetermined Length Type) to x77ac122 String, Cord Thin 122cm}
|
|
| Author: | Roxyncz | | Posted: | Jan 18, 2021 04:54 | | Subject: | Inventory Change Request for Set 60141-1 | | Viewed: | 13 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 60616pb052 Trans-Light Blue Door 1 x 4 x 6 with Stud Handle with Police Badge and 3 White Stripes Pattern (Sticker) - Set 60141 (Counterpart)
* Add 3 Part 57895pb071 Trans-Light Blue Glass for Window 1 x 4 x 6 with Police Badge and 3 White Stripes Pattern (Sticker) - Set 60141 (Counterpart)
|
|
| Author: | msSquirrel | | Posted: | Jan 18, 2021 04:48 | | Subject: | Inventory Change Request for Set 10840-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6474pb41 Red Duplo, Brick 2 x 2 Slope 45 with Cash Register with Card Reader and '1.23' Pattern (Alternate)
Comments from Submitter:
sealed set content
|
|
| Author: | yensid | | Posted: | Jan 18, 2021 04:41 | | Subject: | Inventory Change Request for Set 6738-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 42511c02pb23 Orange Minifigure, Utensil Skateboard with Trolley Wheel Holders with Red Flower on Transparent Background Pattern (Sticker) and Yellow Trolley Wheels (42511pb23 / 2496) (Counterpart)
Comments from Submitter:
Part assembly for skateboard as show in instructions
|
|
| Author: | yensid | | Posted: | Jan 18, 2021 04:04 | | Subject: | Inventory Change Request for Set 6738-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 42511pb23 Orange Minifigure, Utensil Skateboard with Trolley Wheel Holders with Red Flowers and Rivets Pattern (Sticker) - Set 6738 (Counterpart)
Comments from Submitter:
individual sticker board (without wheels)
|
|
| Author: | randyf | | Posted: | Jan 18, 2021 00:36 | | Subject: | Re: Inventory Change Request for Set 30555-1 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, MAndM_Bricks writes:
| | Please make changes to the following inventory:
* Add 1 Part 65468 Medium Azure Minifigure, Utensil Trolls Accessories, 11 in Bag (Multipack) (Alternate)
|
This request will not be accepted.
The inventory guidelines for multipacks are located here:
https://www.bricklink.com/help.asp?helpID=1562
Parts in Multipacks - Complete multipacks are included in this section
unless some parts from the multipacks are used in minifigures. In that case,
the parts from the multipacks that are not used in minifigures are included in
this section.
"this section" refers to the Regular Items section of the inventory.
Cheers,
Randy
|
|
| Author: | yensid | | Posted: | Jan 17, 2021 22:51 | | Subject: | Inventory Change Request for Set 6738-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 42511pb22 Yellow Minifigure, Utensil Skateboard with Trolley Wheel Holders with Island Xtreme Stunts Logo and Skid Plates with Rivets Pattern (Sticker) - Set 6738 (Counterpart)
Comments from Submitter:
This is the board with applied sticker (42511pb22) for the assembled skateboard (42511c01pb22)
|
|
| Author: | MEAD_Bricks | | Posted: | Jan 17, 2021 22:18 | | Subject: | Inventory Change Request for Set 30555-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 65468 Medium Azure Minifigure, Utensil Trolls Accessories, 11 in Bag (Multipack) (Alternate)
|
|
| Author: | randyf | | Posted: | Jan 17, 2021 15:38 | | Subject: | Re: Inventory Change Request for Set 3538-1 | | Viewed: | 17 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, BrickedTitanic writes:
| | Please make changes to the following inventory:
* Delete 1 Part 3176 Blue Plate, Modified 3 x 2 with Hole
* Delete 1 Part 3795 Red Plate 2 x 6
Comments from Submitter:
These two pieces are not shown in the directions to make the set.
|
These requests will not be accepted. See:
https://www.bricklink.com/message.asp?ID=1199693
Cheers,
Randy
|
|
| Author: | StormChaser | | Posted: | Jan 17, 2021 13:15 | | Subject: | Re: Inventory Change Request for Set 3815-1 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, LEdougGO writes:
| | Please make changes to the following inventory:
* Add 1 Part 6041 Black Propeller 3 Blade 3 Diameter (match ID 3815)
Comments from Submitter:
instruction booklet calls for two
|
The other one is here:
|
|
| Author: | LEdougGO | | Posted: | Jan 17, 2021 13:03 | | Subject: | Inventory Change Request for Set 3815-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6041 Black Propeller 3 Blade 3 Diameter (match ID 3815)
Comments from Submitter:
instruction booklet calls for two
|
| Author: | BrickedTitanic | | Posted: | Jan 17, 2021 10:03 | | Subject: | Inventory Change Request for Set 3538-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 3176 Blue Plate, Modified 3 x 2 with Hole
* Delete 1 Part 3795 Red Plate 2 x 6
Comments from Submitter:
These two pieces are not shown in the directions to make the set.
|
|
| Author: | axaday | | Posted: | Jan 17, 2021 09:35 | | Subject: | Inventory Change Request for Set 8435-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Recent partout checked before sale
|
|
| Author: | axaday | | Posted: | Jan 17, 2021 09:33 | | Subject: | Inventory Change Request for Set 8240-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628b Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Squared Pin Hole}
Comments from Submitter:
Recent partout checked before sale
|
|
| Author: | axaday | | Posted: | Jan 17, 2021 09:32 | | Subject: | Inventory Change Request for Set 7045-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Recent partout checked before sale
|
|
| Author: | axaday | | Posted: | Jan 17, 2021 09:31 | | Subject: | Inventory Change Request for Set 10024-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628b Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Squared Pin Hole}
Comments from Submitter:
Recent partout checked before sale
|
|
| Author: | axaday | | Posted: | Jan 17, 2021 09:25 | | Subject: | Inventory Change Request for Set 3422-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628b Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Squared Pin Hole}
Comments from Submitter:
Recent partout checked before sale
|
|
| Author: | axaday | | Posted: | Jan 17, 2021 09:22 | | Subject: | Inventory Change Request for Minifig mk006 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Recent partout
|
|
| Author: | axaday | | Posted: | Jan 17, 2021 09:19 | | Subject: | Inventory Change Request for Set 7471-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628b Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Squared Pin Hole}
Comments from Submitter:
Recent partout checked before sale
|
|
| Author: | axaday | | Posted: | Jan 17, 2021 09:18 | | Subject: | Inventory Change Request for Set 4090-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Recent partout checked before sale
|
|
| Author: | axaday | | Posted: | Jan 17, 2021 09:08 | | Subject: | Inventory Change Request for Set 42110-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 16 Part Red {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Recent partout still separated
|
| Author: | jethroo | | Posted: | Jan 17, 2021 07:43 | | Subject: | Inventory Change Request for Set 75980-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 5 Part 63864pb133 Dark Tan Tile 1 x 3 with Wood Grain Pattern (Alternate) (match ID 1)
|
|
| Author: | platinum_lego | | Posted: | Jan 17, 2021 03:45 | | Subject: | Inventory Change Request for Set 41391-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 60616pb049 Trans-Clear Door 1 x 4 x 6 with Stud Handle with 'OPEN' Sign Pattern (Sticker) - Set 41391 (Counterpart)
* Add 1 Part 60616pb049 Trans-Clear Door 1 x 4 x 6 with Stud Handle with 'OPEN' Sign Pattern (Sticker) - Set 41391 (Counterpart)
* Add 1 Part 87079pb784 Black Tile 2 x 4 with TV Screen with Two People with Pink and Blue Hair Pattern (Sticker) - Set 41391 (Counterpart)
* Add 1 Part 3068bpb1454 Lime Tile 2 x 2 with Groove with 'HLC', Heart, Smiling Emoticon and Two Girls Pattern (Sticker) - Set 41391 (Counterpart)
* Add 1 Part 3068bpb1454 White Tile 2 x 2 with Groove with 'HLC', Heart, Smiling Emoticon and Two Girls Pattern (Sticker) - Set 41391 (Counterpart)
* Add 1 Part 3068bpb1455 Dark Pink Tile 2 x 2 with Groove with Heart and '25', Scissors and Girl with Medium Azure Hair Pattern (Sticker) - Set 41391 (Counterpart)
|
|
| Author: | platinum_lego | | Posted: | Jan 17, 2021 03:39 | | Subject: | Inventory Change Request for Set 70317-1 | | Viewed: | 13 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 30350bpb117 Trans-Neon Orange Tile, Modified 2 x 3 with 2 Clips with White Nexo Knights Radar Pattern (Sticker) - Set 70317 (Counterpart)
|
| Author: | platinum_lego | | Posted: | Jan 17, 2021 03:38 | | Subject: | Inventory Change Request for Set 41391-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 30350bpb118 Magenta Tile, Modified 2 x 3 with 2 Clips with Hearts, Scissors and Girl with Medium Azure Hair Pattern (Sticker) - Set 41391 (Counterpart)
|
| Author: | wichtel10000 | | Posted: | Jan 17, 2021 03:36 | | Subject: | Inventory Change Request for Set 4982-1 | | Viewed: | 13 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part BA135pb05 White Stickered Assembly 6 x 2 with Red 'Start' on Yellow Background Pattern (Sticker) - Set 4982 - 2 Tile 1 x 6 (Alternate)
|
| Author: | SezaR | | Posted: | Jan 17, 2021 03:11 | | Subject: | Inventory Change Request for Set 6532-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4073 Trans-Clear Plate, Round 1 x 1 (Extra)
* Add 1 Part 4592c02 Yellow Antenna Small Base with Black Lever (Extra)
|
| Author: | axaday | | Posted: | Jan 16, 2021 19:33 | | Subject: | Inventory Change Request for Set 71737-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
|
|
| Author: | randyf | | Posted: | Jan 16, 2021 19:25 | | Subject: | Inventory Change Request for Set 42083-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 23 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
From sealed set contents. (The round hole version is absolutely required to build the set, also.)
|
|
| Author: | randyf | | Posted: | Jan 16, 2021 18:49 | | Subject: | Re: Inventory Change Request for Set 42115-1 | | Viewed: | 17 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, BricksThatStick writes:
| | Please make changes to the following inventory:
* Add 20 Part 6628a Red Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole (match ID 1)
* Change 20 Part Red 6628b Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Squared Pin Hole {Regular to Alternate} {match ID 0 to 1}
|
I wonder if the original submitter of the inventory even had ones that had a
square hole. They may have only looked at the part number on them that said 66906
and added that one without actually checking the holes. It would make sense because
the set cannot be built with the square hole version. I think we should remove
the square hole version from the inventory completely.
|
|
|
| Author: | Turez | | Posted: | Jan 16, 2021 18:01 | | Subject: | Inventory Change Request for Set 42122-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Red {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Checked in my set which was used to build the inventory.
|
|
| Author: | BricksThatStick | | Posted: | Jan 16, 2021 16:51 | | Subject: | Inventory Change Request for Set 42115-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 20 Part 6628a Red Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole (match ID 1)
* Change 20 Part Red 6628b Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Squared Pin Hole {Regular to Alternate} {match ID 0 to 1}
|
|
| Author: | BricksThatStick | | Posted: | Jan 16, 2021 16:25 | | Subject: | Re: Inventory Change Request for Set 8062-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, legolex76 writes:
| | Please make changes to the following inventory:
* Change {4 to 6} Part Yellow 2730 Technic, Brick 1 x 10 with Holes
Comments from Submitter:
Hi,
I am currently going through the actual set and instruction manual which I have had since new and noticed this inv. entry is incorrect.
|
Did you build one of the specific models in the instructions that needs 6 of
these? Maybe I missed it but I don't see 6 being used anywhere.
Thanks for any extra info.
Paul.
| | I hope I have filled out the form correctly. In total there are 6 and not 4 of part 2730 in yellow.
Regards,
Alex
|
|
|
| Author: | Roxyncz | | Posted: | Jan 16, 2021 10:58 | | Subject: | Inventory Change Request for Set 60141-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 87079pb834 Dark Orange Tile 2 x 4 with 'WELCOME HOME' and Black Dots Pattern (Sticker) - Set 60141 (Counterpart)
|
| Author: | kestasa | | Posted: | Jan 16, 2021 06:02 | | Subject: | Inventory Change Request for Set 6416-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 87414 Black Tire 15mm D. x 6mm Offset Tread Small - Band Around Center of Tread (Alternate) (match ID 3)
|
|
| Author: | kestasa | | Posted: | Jan 16, 2021 05:46 | | Subject: | Inventory Change Request for Set 5489-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 10 Part 60700 Black Tire 21mm D. x 12mm - Offset Tread Small Wide, Beveled Tread Edge (Alternate) (match ID 1)
* Add 4 Part 89201 Black Tire 24 x 14 Shallow Tread, Band Around Center of Tread (Alternate) (match ID 2)
* Add 4 Part 59895 Black Tire 14mm D. x 4mm Smooth Small Single with Number Molded on Side (Alternate) (match ID 3)
* Add 4 Part 34337 Light Bluish Gray Wheel 8mm D. x 6mm with Slot (Alternate) (match ID 4)
|
|
| Author: | legolex76 | | Posted: | Jan 16, 2021 05:16 | | Subject: | Inventory Change Request for Set 8062-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {4 to 6} Part Yellow 2730 Technic, Brick 1 x 10 with Holes
Comments from Submitter:
Hi,
I am currently going through the actual set and instruction manual which I have had since new and noticed this inv. entry is incorrect.
I hope I have filled out the form correctly. In total there are 6 and not 4 of part 2730 in yellow.
Regards,
Alex
|
|
| Author: | kestasa | | Posted: | Jan 16, 2021 04:33 | | Subject: | Inventory Change Request for Set 9484-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 6015 Black Tire 21mm D. x 12mm - Offset Tread Small Wide (Alternate) (match ID 3)
* Add 4 Part 60700 Black Tire 21mm D. x 12mm - Offset Tread Small Wide, Beveled Tread Edge (Alternate) (match ID 3)
|
| Author: | kestasa | | Posted: | Jan 16, 2021 04:31 | | Subject: | Inventory Change Request for Set 4431-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 6015 Black Tire 21mm D. x 12mm - Offset Tread Small Wide (Alternate) (match ID 1)
|
| Author: | kestasa | | Posted: | Jan 16, 2021 04:27 | | Subject: | Inventory Change Request for Set 7288-1 | | Viewed: | 13 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 10 Part 6015 Black Tire 21mm D. x 12mm - Offset Tread Small Wide (Alternate) (match ID 1)
|
| Author: | kestasa | | Posted: | Jan 16, 2021 04:25 | | Subject: | Inventory Change Request for Set 4201-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 6015 Black Tire 21mm D. x 12mm - Offset Tread Small Wide (Alternate) (match ID 1)
* Add 4 Part 87697 Black Tire 21mm D. x 12mm - Offset Tread Small Wide, Band Around Center of Tread (Alternate) (match ID 1)
|
| Author: | kestasa | | Posted: | Jan 16, 2021 04:19 | | Subject: | Inventory Change Request for Set 7942-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 6 Part 60700 Black Tire 21mm D. x 12mm - Offset Tread Small Wide, Beveled Tread Edge (Alternate) (match ID 3)
|
| Author: | kestasa | | Posted: | Jan 15, 2021 16:31 | | Subject: | Inventory Change Request for Set 7942-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 6 Part 60700 Black Tire 21mm D. x 12mm - Offset Tread Small Wide, Beveled Tread Edge (Alternate)
|
| Author: | kestasa | | Posted: | Jan 15, 2021 16:26 | | Subject: | Inventory Change Request for Set 6194-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 60700 Black Tire 21mm D. x 12mm - Offset Tread Small Wide, Beveled Tread Edge (Alternate)
|
| Author: | axaday | | Posted: | Jan 15, 2021 14:08 | | Subject: | Inventory Change Request for Set 71735-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Minifig {njo576 Jay - Legacy, Rebooted, Ninjago Logogram 'MANTER' on Torso to njo576a Jay - Legacy, Rebooted, Ninjago Logogram 'MASTER' on Torso}
Comments from Submitter:
They corrected the misprinted chest
|
|
| Author: | Brickitty | | Posted: | Jan 15, 2021 12:17 | | Subject: | Inventory Change Request for Set 8167-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 32271pb024L Black Technic, Liftarm 1 x 9 Bent (7 - 3) Thick with Red Stripe Pattern Model Left Side (Sticker) - Set 8167 (Counterpart)
* Add 1 Part 32271pb024R Black Technic, Liftarm 1 x 9 Bent (7 - 3) Thick with Red Stripe Pattern Model Right Side (Sticker) - Set 8167 (Counterpart)
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
Netherlands, Overijssel
Canada, British Columbia
USA, Ohio
Czech Republic, Moravskoslezský Kraj
France, Nouvelle-Aquitaine
Germany, Niedersachsen
United Kingdom, England
Belgium
Norway, Oslo
Croatia, Karlovac
Russia, Moscow Region
Australia, Victoria
Lithuania, Kaunas
