Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | normann1974 | Posted: | Jan 22, 2020 14:42 | Subject: | Inventory Change Request for Set 7952-20 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Flat Silver 4497 Minifigure, Weapon Pike / Spear - Round End {Extra to Alternate} {match ID 1 to 2}
Comments from Submitter:
Both flat silver spears are alternates. There is only one extra (and it's PLG). Change match ID for inv ID 418480 to 2 afterwards. The form will only let me clear the match ID, not change it.
|
|
Author: | StormChaser | Posted: | Jan 22, 2020 11:52 | Subject: | Re: Inventory Change Request for Set 6543-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| your "extra" cap should be a regular part.
|
I agree. This extra cap should be removed and the count of the existing cap
should be changed from 1 to 2.
|
|
Author: | axaday | Posted: | Jan 22, 2020 10:52 | Subject: | Re: Inventory Change Request for Set 6543-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Add 1 Part 4485 White Minifigure, Headgear Cap - Long Flat Bill (Extra)
Comments from Submitter:
I also got an extra white cap.
|
The inventory from the LEGO replacement parts website lists two of these caps
and one image on the box shows two caps, so I guess your "extra" cap should be
a regular part.
|
Ah, well I didn't bother checking the part count.
|
|
Author: | Turez | Posted: | Jan 22, 2020 10:16 | Subject: | Re: Inventory Change Request for Set 6543-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Add 1 Part 4485 White Minifigure, Headgear Cap - Long Flat Bill (Extra)
Comments from Submitter:
I also got an extra white cap.
|
The inventory from the LEGO replacement parts website lists two of these caps
and one image on the box shows two caps, so I guess your "extra" cap should be
a regular part.
|
|
|
Author: | liesbeth | Posted: | Jan 22, 2020 09:00 | Subject: | Inventory Change Request for Set 2000417-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3003pb026 Yellow Brick 2 x 2 with Eye with White Pattern on Two Sides, White Circle in Pupil, Offset
Comments from Submitter:
Part ID 3003pe2 Yellow Brick 2 x 2 With Eye White Pattern on Two Sides, Offset inventoried in this set, but the right part is Part ID 3003pb026 Yellow Brick 2 x 2 with Eye White Pattern on Two Sides, White Cirle in Pupil, Offset
|
|
Author: | axaday | Posted: | Jan 21, 2020 22:47 | Subject: | Inventory Change Request for Set 6543-1 | Viewed: | 33 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4485 White Minifigure, Headgear Cap - Long Flat Bill (Extra)
Comments from Submitter:
I also got an extra white cap.
|
Author: | axaday | Posted: | Jan 21, 2020 22:22 | Subject: | Inventory Change Request for Set 6543-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4592c02 Black Lever Small Base with Black Lever (Extra)
* Add 1 Part 4265b Light Gray Technic Bush 1/2 Toothed Type II (Extra)
Comments from Submitter:
Mine had these extras.
|
|
Author: | SezaR | Posted: | Jan 21, 2020 16:44 | Subject: | Re: Inventory Change Request for Set 9454-1 | Viewed: | 28 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 3 Part 3183a Red Plate, Modified 1 x 4 with Towball Socket, Long, 2 Slots (8mm Socket Length)
* Add 3 Part 3183c Red Plate, Modified 1 x 4 with Towball Socket, Short, 4 Slots (7mm Socket Length)
|
See photos.
|
|
|
Author: | SezaR | Posted: | Jan 21, 2020 16:41 | Subject: | Inventory Change Request for Set 9454-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 3 Part 3183a Red Plate, Modified 1 x 4 with Towball Socket, Long, 2 Slots (8mm Socket Length)
* Add 3 Part 3183c Red Plate, Modified 1 x 4 with Towball Socket, Short, 4 Slots (7mm Socket Length)
|
|
Author: | StormChaser | Posted: | Jan 21, 2020 00:48 | Subject: | Inventory Change Request for Gear 5005237 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory: [G=5005237]
* Delete 1 Gear 36970 Dark Purple Ring (undetermined Inside Diameter)
* Delete 1 Gear 36970 Medium Azure Ring (undetermined Inside Diameter)
* Add 1 Gear 36970a Medium Azure Ring, 14mm Inside Diameter
* Add 1 Gear 36970b Dark Purple Ring, 16mm Inside Diameter
Comments from Submitter:
From sealed set contents. Rings measured.
|
|
Author: | Duncan_Idaho | Posted: | Jan 19, 2020 18:22 | Subject: | Inventory Change Request for Set 21318-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 36 Part 44302b Black Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove (Alternate) (match ID 2)
Comments from Submitter:
I bought 10 times this set las week and sort 8 of them.
I only got the 44302b Black Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove
|
|
Author: | M.Boss | Posted: | Jan 19, 2020 16:07 | Subject: | Re: Inventory Change Request for Set 7662-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| Please make changes to the following inventory:
* Add 4 Part 4460b Reddish Brown Slope 75 2 x 1 x 3 - Hollow Stud (Alternate) (match ID 4)
* Change 4 Part Reddish Brown 4460a Slope 75 2 x 1 x 3 - Open Stud {match ID 0 to 4}
* Change 4 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
Comments from Submitter:
Unboxing and building at http://www.brickshelf.com/cgi-bin/gallery.cgi?f=350246
|
Thank You!
|
|
Author: | Turez | Posted: | Jan 19, 2020 15:26 | Subject: | Re: Inventory Change Request for Set 7662-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| Please make changes to the following inventory:
* Add 4 Part 4460b Reddish Brown Slope 75 2 x 1 x 3 - Hollow Stud (Alternate) (match ID 4)
* Change 4 Part Reddish Brown 4460a Slope 75 2 x 1 x 3 - Open Stud {match ID 0 to 4}
* Change 4 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
Comments from Submitter:
Unboxing and building at http://www.brickshelf.com/cgi-bin/gallery.cgi?f=350246
|
|
|
|
Author: | Turez | Posted: | Jan 19, 2020 15:26 | Subject: | Inventory Change Request for Set 7662-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 4460b Reddish Brown Slope 75 2 x 1 x 3 - Hollow Stud (Alternate) (match ID 4)
* Change 4 Part Reddish Brown 4460a Slope 75 2 x 1 x 3 - Open Stud {match ID 0 to 4}
* Change 4 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
Comments from Submitter:
Unboxing and building at http://www.brickshelf.com/cgi-bin/gallery.cgi?f=350246
|
|
Author: | StormChaser | Posted: | Jan 19, 2020 13:45 | Subject: | Re: Inventory Change Request for Set 41188-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Odur writes:
| OK, got it. Didn't know it varied between regions. I'll not make that
mistake again. Thanks for the information.
|
You're welcome! Don't feel too bad . . . people make these change requests
fairly regularly.
|
|
Author: | Odur | Posted: | Jan 19, 2020 13:37 | Subject: | Re: Inventory Change Request for Set 41188-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
|
| OK, got it. Didn't know it varied between regions. I'll not make that
mistake again. Thanks for the information.
/Odur
In Inventories Requests, StormChaser writes:
| In Inventories Requests, Odur writes:
| Please make changes to the following inventory:
* | | 41188-1 (Inv) Breakout from the Goblin King's Fortress 681 Parts, 4 Minifigures, 2017 Sets: Elves |
* Delete 1 Part 27965 Pearl Gold Hose, Flexible 22L with 2 Connector Ends (Zipline) (Extra)
Comments from Submitter:
Inventory from a new sealed set
|
Extra parts vary by region. Just because your set did not include this extra
doesn't mean that it did not appear in sets from other regions.
.
|
|
|
Author: | StormChaser | Posted: | Jan 19, 2020 09:38 | Subject: | Re: Inventory Change Request for Set 41188-1 | Viewed: | 27 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Odur writes:
| Please make changes to the following inventory:
* | | 41188-1 (Inv) Breakout from the Goblin King's Fortress 681 Parts, 4 Minifigures, 2017 Sets: Elves |
* Delete 1 Part 27965 Pearl Gold Hose, Flexible 22L with 2 Connector Ends (Zipline) (Extra)
Comments from Submitter:
Inventory from a new sealed set
|
Please read:
https://www.bricklink.com/messageThread.asp?ID=248863
|
|
Author: | StormChaser | Posted: | Jan 19, 2020 09:36 | Subject: | Re: Inventory Change Request for Set 41188-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Odur writes:
| Please make changes to the following inventory:
* | | 41188-1 (Inv) Breakout from the Goblin King's Fortress 681 Parts, 4 Minifigures, 2017 Sets: Elves |
* Delete 1 Part 27965 Pearl Gold Hose, Flexible 22L with 2 Connector Ends (Zipline) (Extra)
Comments from Submitter:
Inventory from a new sealed set
|
Extra parts vary by region. Just because your set did not include this extra
doesn't mean that it did not appear in sets from other regions.
.
|
|
Author: | Odur | Posted: | Jan 19, 2020 06:34 | Subject: | Inventory Change Request for Set 41188-1 | Viewed: | 36 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* | | 41188-1 (Inv) Breakout from the Goblin King's Fortress 681 Parts, 4 Minifigures, 2017 Sets: Elves |
* Delete 1 Part 27965 Pearl Gold Hose, Flexible 22L with 2 Connector Ends (Zipline) (Extra)
Comments from Submitter:
Inventory from a new sealed set
|
|
Author: | 1977_mauro | Posted: | Jan 18, 2020 05:04 | Subject: | Inventory Change Request for Set 10267-1 | Viewed: | 43 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {3 to 4} Part White 98138pb013 Tile, Round 1 x 1 with Spiral Red Pattern (Extra)
* Change {2 to 3} Part Reddish Brown 98138pb042 Tile, Round 1 x 1 with Tree Stump / Wood Grain Pattern (Extra)
Comments from Submitter:
From a sealed set.
|
|
Author: | StormChaser | Posted: | Jan 18, 2020 03:23 | Subject: | Re: Inventory Change Request for Set 70922-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, mickandyp writes:
| Please make changes to the following inventory:
* Add 1 Part 3038 Black Slope 45 2 x 3 (Counterpart)
Comments from Submitter:
Slope with sticker 9 from Set 70922
|
First you need to add the part with a sticker to the catalog. You may do that
here:
https://www.bricklink.com/wantedCatalog.asp
Then you need to add an image. You may do that here:
https://www.bricklink.com/v2/catalog/catalogImageAdd.page
Once the new part has been approved, then you can submit an inventory change
request to add it to the set's inventory.
|
|
Author: | mickandyp | Posted: | Jan 18, 2020 03:20 | Subject: | Inventory Change Request for Set 70922-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3038 Black Slope 45 2 x 3 (Counterpart)
Comments from Submitter:
Slope with sticker 9 from Set 70922
|
Author: | lego.12vtrains | Posted: | Jan 17, 2020 11:53 | Subject: | Re: Inventory Change Request for Set 6302-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
|
| Here below I attach 2 pictures of a sealed bag coming from set 6302. |
|
Author: | lego.12vtrains | Posted: | Jan 17, 2020 11:49 | Subject: | Inventory Change Request for Set 6302-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3070b Yellow Tile 1 x 1 with Groove (3070) (Extra)
|
|
Author: | StormChaser | Posted: | Jan 15, 2020 21:40 | Subject: | Re: Inventory Change Request for Set 9152-1 | Viewed: | 28 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| Please make changes to the following inventory:
* Add 1 Part 4375 Blackish-Green Duplo Tree Post - Thin Leaves
* Change {2,820 to 13} Part Red-Gold 666 Duplo Tile, Modified 34 x 144 x 9/10 (Thick) with 4 Elephant Tusks
* Change {1 to 1} Part Yellow 4066 Duplo, Brick 1 x 2 x 2 without Bottom Tube
|
Changes based on incomplete parts list recently discovered. Photo 1 and Photo
2 attached.
|
|
|
Author: | StormChaser | Posted: | Jan 15, 2020 21:34 | Subject: | Inventory Change Request for Set 9152-1 | Viewed: | 40 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4375 Black Duplo Sign Post Short - Thin Base
* Change {2 to 1} Part Red 6413 Duplo Tile, Modified 2 x 4 x 1/2 (Thick) with 4 Center Studs
* Change {10 to 11} Part Yellow 4066 Duplo, Brick 1 x 2 x 2 without Bottom Tube
|
|
Author: | StormChaser | Posted: | Jan 14, 2020 10:48 | Subject: | Re: Inventory Change Request for Set 76103-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, mickandyp writes:
| Please make changes to the following inventory:
* Add 1 Part 3010 Black Brick 1 x 4 (Counterpart)
Comments from Submitter:
Brick 1 x 4 with White upside down Triangle Pattern (Sticker) - Set 76103. Sticker #2
|
First you need to add the part with a sticker to the catalog. You may do that
here:
https://www.bricklink.com/wantedCatalog.asp
Then you need to add an image. You may do that here:
https://www.bricklink.com/v2/catalog/catalogImageAdd.page
Once the new part has been approved, then you can submit an inventory change
request to add it to the set's inventory.
|
|
Author: | mickandyp | Posted: | Jan 14, 2020 07:26 | Subject: | Inventory Change Request for Set 76103-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3010 Black Brick 1 x 4 (Counterpart)
Comments from Submitter:
Brick 1 x 4 with White upside down Triangle Pattern (Sticker) - Set 76103. Sticker #2
|
|
Author: | axaday | Posted: | Jan 14, 2020 06:15 | Subject: | Inventory Change Request for Set colsh-9 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 92338 Dark Purple Chain 5 Links (Extra)
Comments from Submitter:
Randy fixed the other extra on this set. I neglected to get them in there.
|
|
Author: | SezaR | Posted: | Jan 14, 2020 00:02 | Subject: | Re: Inventory Change Request for Set 6543-1 | Viewed: | 33 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Admin_Russell writes:
| In Inventories Requests, SezaR writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 1 Part Black {x77a String, Cord Thin (Undetermined Length) to x77ac75 String, Cord Thin 75cm}
* Change 1 Part Black {3962 Minifigure, Utensil Radio (Undetermined Handle Type) to 3962b Minifigure, Utensil Radio with Extended Handle}
* Change 5 Part Brown {2536 Plant, Tree Palm Trunk - (Undetermined Connector Version) to 2536b Plant, Tree Palm Trunk - Short Connector, no Axle Hole}
* Change 4 Part White {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
Comments from Submitter:
My string is actually 77.5 cm.
Pics to Follow
|
The string on my new 7838 is 76cm. This is why the length of wires and strings
should be rather given something like "about 75cm", not "75cm" or not "15 studs".
|
That's what the entry means. 75cm means about or at least 75cm long.
|
I did not know it meant that and I still don't know what part of the entry
means that neither. I have seen many people confused when listing these wire/assmbely
itmes. Some mentioned in their listing "the wire is 1cm short"...
I meatured 5 wires that comes with wire
and they were 2cm of difference (max length - min length= 2cm)
Not only many people are confused, so were some catalog admins. Here we have
these two entries, probably the same:
[s=765c96]
and
[s=766c94]
The other level of confusion is whether the length of wires include the connectors
or not. I think it is better we do not, because if an item is named something
like
"Electric, Wire 12V / 4.5V with two 2-prong connectors, with wire of approximate
length 40cm"
then we can inventory the item with "wire of approximate length 40cm" so less
confusion. Then the same entry for wire can be used to create other wire/connector
assembly like
"Electric, Wire 12V / 4.5V with two 2-prong connectors without middle pin, with
wire of approximate length 40cm"
or
"Electric, Wire 12V / 4.5V with male Squared Wide Short Connector and Male Squared
Narrow Long Connector, with wire of approximate length 40cm"
They can all be inventories with
"wire of approximate length 40cm".
|
|
Author: | Admin_Russell | Posted: | Jan 13, 2020 20:46 | Subject: | Re: Inventory Change Request for Set 6543-1 | Viewed: | 42 times | Topic: | Inventories Requests | |
|
|
BrickLink ID CardAdmin_Russell
|
Location: USA, California |
Member Since |
Contact |
Type |
Status |
May 9, 2017 |
|
Admin |
|
|
BrickLink Administrator |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 1 Part Black {x77a String, Cord Thin (Undetermined Length) to x77ac75 String, Cord Thin 75cm}
* Change 1 Part Black {3962 Minifigure, Utensil Radio (Undetermined Handle Type) to 3962b Minifigure, Utensil Radio with Extended Handle}
* Change 5 Part Brown {2536 Plant, Tree Palm Trunk - (Undetermined Connector Version) to 2536b Plant, Tree Palm Trunk - Short Connector, no Axle Hole}
* Change 4 Part White {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
Comments from Submitter:
My string is actually 77.5 cm.
Pics to Follow
|
The string on my new 7838 is 76cm. This is why the length of wires and strings
should be rather given something like "about 75cm", not "75cm" or not "15 studs".
|
That's what the entry means. 75cm means about or at least 75cm long.
|
|
Author: | axaday | Posted: | Jan 13, 2020 20:26 | Subject: | Re: Inventory Change Request for Set 6543-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 1 Part Black {x77a String, Cord Thin (Undetermined Length) to x77ac75 String, Cord Thin 75cm}
* Change 1 Part Black {3962 Minifigure, Utensil Radio (Undetermined Handle Type) to 3962b Minifigure, Utensil Radio with Extended Handle}
* Change 5 Part Brown {2536 Plant, Tree Palm Trunk - (Undetermined Connector Version) to 2536b Plant, Tree Palm Trunk - Short Connector, no Axle Hole}
* Change 4 Part White {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
Comments from Submitter:
My string is actually 77.5 cm.
Pics to Follow
|
The string on my new 7838 is 76cm. This is why the length of wires and strings
should be rather given something like "about 75cm", not "75cm" or not "15 studs".
|
Agreed
|
|
Author: | SezaR | Posted: | Jan 13, 2020 20:18 | Subject: | Re: Inventory Change Request for Set 6543-1 | Viewed: | 28 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 1 Part Black {x77a String, Cord Thin (Undetermined Length) to x77ac75 String, Cord Thin 75cm}
* Change 1 Part Black {3962 Minifigure, Utensil Radio (Undetermined Handle Type) to 3962b Minifigure, Utensil Radio with Extended Handle}
* Change 5 Part Brown {2536 Plant, Tree Palm Trunk - (Undetermined Connector Version) to 2536b Plant, Tree Palm Trunk - Short Connector, no Axle Hole}
* Change 4 Part White {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
Comments from Submitter:
My string is actually 77.5 cm.
Pics to Follow
|
The string on my new 7838 is 76cm. This is why the length of wires and strings
should be rather given something like "about 75cm", not "75cm" or not "15 studs".
|
|
Author: | axaday | Posted: | Jan 13, 2020 18:37 | Subject: | Re: Inventory Change Request for Set 138-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, wannes. writes:
The volunteer admins are currently on break waiting for the status to be settled
with The Lego Group, so Russell is working alone right now. He's approving
new items and new inventories, but he isn't doing a lot of changes to old
inventories. I don't know what the timeline is, but you may have to wait
until Randy and Paul are back.
|
Author: | wannes. | Posted: | Jan 13, 2020 18:33 | Subject: | Re: Inventory Change Request for Set 138-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| Is any one on this? |
|
Author: | axaday | Posted: | Jan 13, 2020 17:06 | Subject: | Re: Inventory Change Request for Set 6543-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 1 Part Black {x77a String, Cord Thin (Undetermined Length) to x77ac75 String, Cord Thin 75cm}
* Change 1 Part Black {3962 Minifigure, Utensil Radio (Undetermined Handle Type) to 3962b Minifigure, Utensil Radio with Extended Handle}
* Change 5 Part Brown {2536 Plant, Tree Palm Trunk - (Undetermined Connector Version) to 2536b Plant, Tree Palm Trunk - Short Connector, no Axle Hole}
* Change 4 Part White {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
Comments from Submitter:
My string is actually 77.5 cm.
Pics to Follow
|
|
|
|
Author: | axaday | Posted: | Jan 13, 2020 17:03 | Subject: | Inventory Change Request for Set 6543-1 | Viewed: | 38 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {x77a String, Cord Thin (Undetermined Length) to x77ac75 String, Cord Thin 75cm}
* Change 1 Part Black {3962 Minifigure, Utensil Radio (Undetermined Handle Type) to 3962b Minifigure, Utensil Radio with Extended Handle}
* Change 5 Part Brown {2536 Plant, Tree Palm Trunk - (Undetermined Connector Version) to 2536b Plant, Tree Palm Trunk - Short Connector, no Axle Hole}
* Change 4 Part White {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
Comments from Submitter:
My string is actually 77.5 cm.
Pics to Follow
|
|
Author: | SezaR | Posted: | Jan 13, 2020 16:38 | Subject: | Re: Inventory Change Request for Set 113-2 | Viewed: | 38 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Add 1 Part bb0007pb01 Blue Electric, Motor 4.5V Type A 12 x 4 x 4 with 4.5V stamped on front (match ID 11)
* Delete 4 Part trainrim Light Gray Train Rim for 4.5V & 12V Locomotive Wheels
* Delete 4 Part wheel1b Red Train Wheel with 2 x 2 Stud Center, Beveled Tread and Cam Axle for Motor
* Add 4 Part wheel1bc01 Red Train Wheel with 2 x 2 Stud Center, Beveled Tread and Cam Axle for Motor with Light Gray Train Rim for 4.5V & 12V Locomotive Wheels (wheel1b / trainrim)
* Change 1 Part Blue bb0007 Electric, Motor 4.5V Type A 12 x 4 x 4 {match ID 0 to 11}
|
This item
[p=bb0007pb01]
existed already in colors black and blue. I am not sure why this motor was recently
added
Perhaps for the extra black plate glued underneath. But I have not seen
[p=bb0007pb01]
without this black plate.
Also, the name of the item bb0007c01pb02 is "...with 4.5 VOLT stamped on front"
but it should be "...with 4.5 V. stamped on front".
I think I will soon request to remove bb0007c01pb02 unless if somebody gives
an evidence that bb0007c01pb02 appeared without this extra glued black plate.
Note that the photo on the catalog cannot be an evidence because the plate could
have separated and fell from the motor.
|
|
|
Author: | SezaR | Posted: | Jan 13, 2020 16:31 | Subject: | Inventory Change Request for Set 113-2 | Viewed: | 39 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part bb0007pb01 Blue Electric, Motor 4.5V Type A 12 x 4 x 4 with 4.5V stamped on front (match ID 11)
* Delete 4 Part trainrim Light Gray Train Rim for 4.5V & 12V Locomotive Wheels
* Delete 4 Part wheel1b Red Train Wheel with 2 x 2 Stud Center, Beveled Tread and Cam Axle for Motor
* Add 4 Part wheel1bc01 Red Train Wheel with 2 x 2 Stud Center, Beveled Tread and Cam Axle for Motor with Light Gray Train Rim for 4.5V & 12V Locomotive Wheels (wheel1b / trainrim)
* Change 1 Part Blue bb0007 Electric, Motor 4.5V Type A 12 x 4 x 4 {match ID 0 to 11}
|
|
Author: | go4bob | Posted: | Jan 13, 2020 06:23 | Subject: | Inventory Change Request for Set 3186-1 | Viewed: | 33 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3024 Trans-Red Plate 1 x 1 (Extra)
|
Author: | StormChaser | Posted: | Jan 12, 2020 15:27 | Subject: | Re: Inventory Change Request for Set 60153-1 | Viewed: | 34 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Odur writes:
| * Delete 1 Part (Extra)
* Delete 1 Part (Extra)
Comments from Submitter:
Inventory from a new sealed set
|
Have you checked all new sealed sets to verify that these extra parts never came
in any of them?
|
|
Author: | Odur | Posted: | Jan 12, 2020 14:36 | Subject: | Inventory Change Request for Set 60153-1 | Viewed: | 45 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 2599a Lime Minifigure, Footgear Flipper (Extra)
* Delete 1 Part 32918 Trans-Clear Plastic Triangle 6 x 12 Sail with Dark Blue Wave in Circle and Dark Azure, Dark Blue and Green Markings Pattern (Extra)
Comments from Submitter:
Inventory from a new sealed set
|
|
Author: | paulvdb | Posted: | Jan 12, 2020 07:43 | Subject: | Re: Inventory Change Request for Set 60020-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, elias3 writes:
| Please make changes to the following inventory:
* Delete 2 Part 3794 Red Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) (Alternate) (match ID 1)
* Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 2 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 4 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads - (Undetermined Version) to 92409 Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread}
* Change 4 Part Light Bluish Gray {42610c01 Wheel 11mm D. x 8mm with Center Groove with Black Tire 17.5 x 6 Shallow Staggered Treads (42610 / 51011u) to 42610c03 Wheel 11mm D. x 8mm with Center Groove with Black Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread (42610 / 92409)} {Counterpart to Regular}
Comments from Submitter:
source: part out sets and own collection
|
Another one where 3794 should not be deleted but changed to 3794a. First, 3794
was added as an alternate indicating that it was intended to be 3794a. And second,
this screenshot from a video review clearly shows 3794a.
|
|
|
Author: | paulvdb | Posted: | Jan 12, 2020 07:34 | Subject: | Re: Inventory Change Request for Set 60025-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, elias3 writes:
| Please make changes to the following inventory:
* Delete 3 Part 3794b Red Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 1)
* Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 2 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 5 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads - (Undetermined Version) to 92409 Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread}
* Change 3 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)}
* Change 5 Part Light Bluish Gray {42610c01 Wheel 11mm D. x 8mm with Center Groove with Black Tire 17.5 x 6 Shallow Staggered Treads (42610 / 51011u) to 42610c03 Wheel 11mm D. x 8mm with Center Groove with Black Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread (42610 / 92409)} (Counterpart)
Comments from Submitter:
source: part out sets and own collection
|
Part 3794 in red should not be removed from this set. It should be changed to
3794a because both variants were found in this set. Several video reviews of
the set show 3794a. Included a screenshot from one of them that clearly shows
it.
|
|
|
Author: | elias3 | Posted: | Jan 12, 2020 04:39 | Subject: | Inventory Change Request for Set 60042-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
source: part out sets and own collection
|
|
Author: | StormChaser | Posted: | Jan 12, 2020 02:35 | Subject: | Re: Inventory Change Request for Set 60178-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, TuffyJCW writes:
| Please make changes to the following inventory:
* Add 1 Part 6239 Black Tail Shuttle (Counterpart)
Comments from Submitter:
There is no entry in inventory for the 6239 Tail Decorated with sticker #2 and #6.
|
First you must add the items to the catalog here:
https://www.bricklink.com/wantedCatalog.asp
Then add images here:
https://www.bricklink.com/v2/catalog/catalogImageAdd.page
Once the new items are approved, then you may add them to the inventory of this
set.
|
|
Author: | CamelCityBH | Posted: | Jan 11, 2020 22:50 | Subject: | Inventory Change Request for Set 60178-1 | Viewed: | 37 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6239 Black Tail Shuttle (Counterpart)
Comments from Submitter:
There is no entry in inventory for the 6239 Tail Decorated with sticker #2 and #6.
|
|
Author: | Tom_a_Jerry | Posted: | Jan 11, 2020 18:38 | Subject: | Inventory Change Request for Set 75194-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 58176 Trans-Red Bar with Light Cover (Bulb) / Bionicle Barraki Eye (Extra)
Comments from Submitter:
Hi, I've built this set from a sealed box and found one extra part not displayed in the inventory, so I'm reporting it.
|
|
Author: | Mortimer | Posted: | Jan 11, 2020 18:28 | Subject: | Inventory Change Request for Set 76073-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4624 Light Bluish Gray Wheel 8mm D. x 6mm (Extra)
Comments from Submitter:
From MISB set.
|
|
Author: | elias3 | Posted: | Jan 11, 2020 13:19 | Subject: | Inventory Change Request for Set 60020-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 3794 Red Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) (Alternate) (match ID 1)
* Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 2 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 4 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads - (Undetermined Version) to 92409 Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread}
* Change 4 Part Light Bluish Gray {42610c01 Wheel 11mm D. x 8mm with Center Groove with Black Tire 17.5 x 6 Shallow Staggered Treads (42610 / 51011u) to 42610c03 Wheel 11mm D. x 8mm with Center Groove with Black Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread (42610 / 92409)} {Counterpart to Regular}
Comments from Submitter:
source: part out sets and own collection
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|