Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | Hygrotus  | | Posted: | Oct 11, 2018 03:41 | | Subject: | Re: 75222 | | Viewed: | 44 times | | Topic: | Inventories | |
|
| In Announce, igor79 writes:
| | hi, why 75222 dont have inventory list?
|
Because nobody done it yet 
|
| Author: | igor79 | | Posted: | Oct 11, 2018 03:40 | | Subject: | 75222 | | Viewed: | 79 times | | Topic: | Inventories | | Status: | Open | |
|
| | hi, why 75222 dont have inventory list? |
 |
| Author: | StormChaser | | Posted: | Oct 7, 2018 13:37 | | Subject: | Re: Need Work | | Viewed: | 49 times | | Topic: | Inventories | |
|
| In Inventories, brasletty writes:
| | I send you pictures from rare items that are not in the catalog start there .
|
I added about half of them and still haven't gotten around to the other half.
Honestly, since you have the items there in front of you it might be better
if you added them to the catalog yourself. You have more knowledge of these
older items than I do and you can add weights, dimensions, years, etc. whereas
I cannot.
To RobErNat:
There is no compensation that I am able to offer for inventories. As for what
BrickLink offers, you already know what that is and I don't believe it will
change in the immediate future.
As for people being less proactive on submitting inventories, it's hard to
say with any degree of certainty. We're definitely doing pretty well with
this year's sets (659 sets released so far in 2018 and about 91% have been
inventoried). However, at least 236 of this year's sets (just over a third
of them) were inventoried by BL employees or volunteers.
Historically, that seems fairly normal. BrickLink staff have always supplied
a high number of inventories going back to when the site was first launched.
If you look at the credits for sets inventoried, 6 of the top 10 contributors
are (or were) BrickLink staff members.
To mfav:
I believe that you're saying the part assembly shown in your photo should
be included in the catalog? You're welcome to submit it and see what happens.
There are still no rules on what will or won't be accepted when it comes
to part assemblies.
|
|
| Author: | mfav | | Posted: | Oct 3, 2018 20:57 | | Subject: | Re: Need Work | | Viewed: | 41 times | | Topic: | Inventories | |
|
| | ? |
|
|
| Author: | RobErNat | | Posted: | Oct 3, 2018 13:09 | | Subject: | Re: Need Work | | Viewed: | 56 times | | Topic: | Inventories | |
|
| In Inventories, StormChaser writes:
| | We inventory administrators have used up all the work. There are no inventories
or inventory change requests pending approval. I can't speak for Marek,
but I feel rather useless with nothing to do.
There are still 410 sets which haven't been inventoried, including 68 sets
from this year. Send us some work!
|
Which includes 'items marked for deletion'
It will be hard to get those inventoried 
Granted, only a few among those 410
I might be wrong, but I'm sensing people seem to be less pro active on submitting
inventories, maybe the current 'offer' ain't good enough
For instance, I notice a lot of 'Lego brand Store' kits are uninventoried,
I got a few (like 'several' from that list, but hey, they will drop
value if I start on them, any specific compensation you're able to offer?
|
|
| Author: | RobErNat | | Posted: | Oct 3, 2018 12:55 | | Subject: | Re: Need Work | | Viewed: | 47 times | | Topic: | Inventories | |
|
| In Inventories, Cob writes:
| | In Inventories, StormChaser writes:
| | We inventory administrators have used up all the work. There are no inventories
or inventory change requests pending approval. I can't speak for Marek,
but I feel rather useless with nothing to do.
There are still 410 sets which haven't been inventoried, including 68 sets
from this year. Send us some work!
|
Looks like there is plenty to do in the Catalog add or change section.
https://www.bricklink.com/catalogPend.asp
|
Inventory Admins manage 'inventories', not 'catalog entries',
that's for the cadmins to handle...
I know, it's confusing: 2 teams working 2 sides of the database 
|
|
| Author: | Cob | | Posted: | Oct 3, 2018 12:49 | | Subject: | Re: Need Work | | Viewed: | 41 times | | Topic: | Inventories | |
|
| In Inventories, StormChaser writes:
| | We inventory administrators have used up all the work. There are no inventories
or inventory change requests pending approval. I can't speak for Marek,
but I feel rather useless with nothing to do.
There are still 410 sets which haven't been inventoried, including 68 sets
from this year. Send us some work!
|
Looks like there is plenty to do in the Catalog add or change section.
https://www.bricklink.com/catalogPend.asp
|
|
| Author: | Speciale | | Posted: | Oct 3, 2018 12:48 | | Subject: | Re: Need Work | | Viewed: | 37 times | | Topic: | Inventories | |
|
| In Inventories, StormChaser writes:
| | We inventory administrators have used up all the work. There are no inventories
or inventory change requests pending approval. I can't speak for Marek,
but I feel rather useless with nothing to do.
There are still 410 sets which haven't been inventoried, including 68 sets
from this year. Send us some work!
|
I send you pictures from rare items that are not in the catalog start there .
regards Rohnny
|
|
| Author: | Hygrotus | | Posted: | Oct 3, 2018 12:07 | | Subject: | Re: Need Work | | Viewed: | 38 times | | Topic: | Inventories | |
|
| In Inventories, StormChaser writes:
| | We inventory administrators have used up all the work. There are no inventories
or inventory change requests pending approval. I can't speak for Marek,
but I feel rather useless with nothing to do.
There are still 410 sets which haven't been inventoried, including 68 sets
from this year. Send us some work!
|
and already is one minifig inventory pending
|
|
| Author: | Hygrotus | | Posted: | Oct 3, 2018 12:06 | | Subject: | Re: Need Work | | Viewed: | 33 times | | Topic: | Inventories | |
|
| In Inventories, StormChaser writes:
| | In Inventories, MidwestBrick writes:
| | Is there ever an ongoing list or update of sets that need to be inventoried?
I personally would enjoy doing one eventually. For example, which 68 sets have
not been done yet?
|
Sure, and here it is:
https://www.bricklink.com/catalogListOld.asp?v=3&itemInvUserID=0
You can sort the sets to find which sets from 2018 still need inventories.
|
Once again in the same time
One mind?
|
|
| Author: | Hygrotus | | Posted: | Oct 3, 2018 12:04 | | Subject: | Re: Need Work | | Viewed: | 35 times | | Topic: | Inventories | |
|
| In Inventories, MidwestBrick writes:
| | In Inventories, StormChaser writes:
| | We inventory administrators have used up all the work. There are no inventories
or inventory change requests pending approval. I can't speak for Marek,
but I feel rather useless with nothing to do.
There are still 410 sets which haven't been inventoried, including 68 sets
from this year. Send us some work!
|
Is there ever an ongoing list or update of sets that need to be inventoried?
I personally would enjoy doing one eventually. For example, which 68 sets have
not been done yet?
|
Here you have the list
https://www.bricklink.com/catalogListOld.asp?v=3&itemInvUserID=0
|
|
| Author: | StormChaser | | Posted: | Oct 3, 2018 12:04 | | Subject: | Re: Need Work | | Viewed: | 55 times | | Topic: | Inventories | |
|
| In Inventories, MidwestBrick writes:
| | Is there ever an ongoing list or update of sets that need to be inventoried?
I personally would enjoy doing one eventually. For example, which 68 sets have
not been done yet?
|
Sure, and here it is:
https://www.bricklink.com/catalogListOld.asp?v=3&itemInvUserID=0
You can sort the sets to find which sets from 2018 still need inventories.
|
|
| Author: | MidwestBrick | | Posted: | Oct 3, 2018 12:02 | | Subject: | Re: Need Work | | Viewed: | 51 times | | Topic: | Inventories | |
|
| In Inventories, StormChaser writes:
| | We inventory administrators have used up all the work. There are no inventories
or inventory change requests pending approval. I can't speak for Marek,
but I feel rather useless with nothing to do.
There are still 410 sets which haven't been inventoried, including 68 sets
from this year. Send us some work!
|
Is there ever an ongoing list or update of sets that need to be inventoried?
I personally would enjoy doing one eventually. For example, which 68 sets have
not been done yet?
|
|
| Author: | Hygrotus | | Posted: | Oct 3, 2018 11:58 | | Subject: | Re: Need Work | | Viewed: | 57 times | | Topic: | Inventories | |
|
| In Inventories, StormChaser writes:
| | We inventory administrators have used up all the work. There are no inventories
or inventory change requests pending approval. I can't speak for Marek,
but I feel rather useless with nothing to do.
There are still 410 sets which haven't been inventoried, including 68 sets
from this year. Send us some work!
|
I have plans for the evening to do one inventory
|
|
| Author: | StormChaser | | Posted: | Oct 3, 2018 11:49 | | Subject: | Need Work | | Viewed: | 230 times | | Topic: | Inventories | | Status: | Open | |
|
| We inventory administrators have used up all the work. There are no inventories
or inventory change requests pending approval. I can't speak for Marek,
but I feel rather useless with nothing to do.
There are still 410 sets which haven't been inventoried, including 68 sets
from this year. Send us some work!
|
| Author: | StormChaser | | Posted: | Oct 2, 2018 12:27 | | Subject: | Re: Technic Rack Winder 2426 or seperate pieces | | Viewed: | 23 times | | Topic: | Inventories | |
|
| In Inventories, samsam2 writes:
| | Did this part need to be assembled in original sets?
|
I think it so likely that I've changed all instances of appearances in sets
from counterpart to regular item. Thank you mfav for the excellent images -
they've been added and credited to you.
|
| Author: | mfav | | Posted: | Oct 2, 2018 11:50 | | Subject: | Re: Technic Rack Winder 2426 or seperate pieces | | Viewed: | 35 times | | Topic: | Inventories | |
|
| | | I know that when I bought and new, these rack winders were
assembled in the box. I've never seen them disassembled in the wild.
|
Probably because it's disassembleable like
|
|
|
| Author: | jblock | | Posted: | Oct 2, 2018 09:52 | | Subject: | Re: Technic Rack Winder 2426 or seperate pieces | | Viewed: | 34 times | | Topic: | Inventories | |
|
| In Inventories, StormChaser writes:
| | In Inventories, samsam2 writes:
| | Did this part need to be assembled in original sets?
[p=2426]
|
| | I've never seen this part separated and I would be very surprised if it didn't
originally come assembled.
|
Perhaps you could investigate the situation of how this part came in sets? Look
for sealed contents (photo or video) of some of the nine sets in which the assembly
appeared. I checked the instructions for one of the sets just now and it did
not show the part being assembled (meaning it probably came assembled for that
set).
Let us know what you find out. If you can verify that it came assembled in two
or three of the nine sets, then I think we could be confident it came assembled
in all of them and correct them all.
|
I know that when I bought and new, these rack winders were
assembled in the box. I've never seen them disassembled in the wild.
|
|
| Author: | axaday | | Posted: | Oct 2, 2018 05:42 | | Subject: | Re: TimeCruisers Testflug Cassette | | Viewed: | 30 times | | Topic: | Inventories | |
|
| In Catalog, StormChaser writes:
| | In Catalog, axaday writes:
| | I just opened up and inside I found a I have no idea
what it is. Should it be in the inventory?
|
I don't have any problem with it being there if it came in the set. I'm
guessing your audiocassette was the German version?
|
Yes
|
|
| Author: | Nordbart | | Posted: | Oct 2, 2018 03:25 | | Subject: | Re: Technic Rack Winder 2426 or seperate pieces | | Viewed: | 27 times | | Topic: | Inventories | |
|
| In Inventories, Nordbart writes:
| | I remember getting for Christmas in 1989. I can't remember this
part being not assembled and knowing my young me I would have disassembled it
somehow if i had seen it apart. So, I can give a 100% certain "It-was-probably-always-assembled"
nordbart
|
PS: I was think it might have been part of the plastic tray for the Box lid and
I did a quick search. i was correct.
nordbart
|
|
|
| Author: | Nordbart | | Posted: | Oct 2, 2018 03:18 | | Subject: | Re: Technic Rack Winder 2426 or seperate pieces | | Viewed: | 30 times | | Topic: | Inventories | |
|
| In Inventories, StormChaser writes:
| | In Inventories, samsam2 writes:
| | Did this part need to be assembled in original sets?
[p=2426]
|
| | I've never seen this part separated and I would be very surprised if it didn't
originally come assembled.
|
|
| | Let us know what you find out. If you can verify that it came assembled in two
or three of the nine sets, then I think we could be confident it came assembled
in all of them and correct them all.
|
I remember getting for Christmas in 1989. I can't remember this
part being not assembled and knowing my young me I would have disassembled it
somehow if i had seen it apart. So, I can give a 100% certain "It-was-probably-always-assembled"
nordbart
|
|
| Author: | StormChaser | | Posted: | Oct 2, 2018 02:59 | | Subject: | Re: Technic Rack Winder 2426 or seperate pieces | | Viewed: | 32 times | | Topic: | Inventories | |
|
| In Inventories, samsam2 writes:
| | Did this part need to be assembled in original sets?
[p=2426]
|
| | I've never seen this part separated and I would be very surprised if it didn't
originally come assembled.
|
Perhaps you could investigate the situation of how this part came in sets? Look
for sealed contents (photo or video) of some of the nine sets in which the assembly
appeared. I checked the instructions for one of the sets just now and it did
not show the part being assembled (meaning it probably came assembled for that
set).
Let us know what you find out. If you can verify that it came assembled in two
or three of the nine sets, then I think we could be confident it came assembled
in all of them and correct them all.
|
|
| Author: | StormChaser | | Posted: | Oct 2, 2018 02:53 | | Subject: | Re: TimeCruisers Testflug Cassette | | Viewed: | 24 times | | Topic: | Inventories | |
|
| In Catalog, axaday writes:
| | I just opened up and inside I found a I have no idea
what it is. Should it be in the inventory?
|
I don't have any problem with it being there if it came in the set. I'm
guessing your audiocassette was the German version?
|
|
| Author: | samsam2 | | Posted: | Oct 1, 2018 23:16 | | Subject: | Technic Rack Winder 2426 or seperate pieces | | Viewed: | 54 times | | Topic: | Inventories | | Status: | Open | |
|
| Did this part need to be assembled in original sets?
[p=2426]
This assembly is only in counterparts of set inventories, and (very annoying
to many) its high cost parts are in set inventories instead.
I've never seen this part separated and I would be very surprised if it didn't
originally come assembled.
|
|
| Author: | Dino | | Posted: | Oct 1, 2018 18:50 | | Subject: | Re: TimeCruisers Testflug Cassette | | Viewed: | 32 times | | Topic: | Inventories | |
|
| In Catalog, axaday writes:
| | In Catalog, Dino1 writes:
| | In Catalog, axaday writes:
| | I just opened up and inside I found a I have no idea
what it is. Should it be in the inventory?
|
In 1996, in Germany, all Time Cruiser sets, except 6491, were sold with one of
the audio tapes 1, 2 or 3.
|
Is it music? Or a story? I don't think I have a cassette player.
|
It's a story for a role play game.
|
|
| Author: | axaday | | Posted: | Oct 1, 2018 18:45 | | Subject: | Re: TimeCruisers Testflug Cassette | | Viewed: | 26 times | | Topic: | Inventories | |
|
| In Catalog, Dino1 writes:
| | In Catalog, axaday writes:
| | I just opened up and inside I found a I have no idea
what it is. Should it be in the inventory?
|
In 1996, in Germany, all Time Cruiser sets, except 6491, were sold with one of
the audio tapes 1, 2 or 3.
|
Is it music? Or a story? I don't think I have a cassette player.
|
|
| Author: | Dino | | Posted: | Oct 1, 2018 18:40 | | Subject: | Re: TimeCruisers Testflug Cassette | | Viewed: | 58 times | | Topic: | Inventories | |
|
| In Catalog, axaday writes:
| | I just opened up and inside I found a I have no idea
what it is. Should it be in the inventory?
|
In 1996, in Germany, all Time Cruiser sets, except 6491, were sold with one of
the audio tapes 1, 2 or 3.
|
| Author: | axaday | | Posted: | Oct 1, 2018 17:26 | | Subject: | TimeCruisers Testflug Cassette | | Viewed: | 78 times | | Topic: | Inventories | | Status: | Open | |
|
| I just opened up and inside I found a I have no idea
what it is. Should it be in the inventory?
|
|
| Author: | randyf | | Posted: | Sep 27, 2018 11:45 | | Subject: | Re: 2853 Technic Crankshaft | | Viewed: | 37 times | | Topic: | Inventories | |
|
| In Inventories, Lifelong writes:
| | In Inventories, randyf writes:
| | In Inventories, Lifelong writes:
| | Not to sound like Jerry Seinfeld, but "what's the deal" with this part in
this color? Is it Yellow or Bright Light Orange? Every single set that we have
pulled this part out of has been BLO despite the fact that the BL cat identifies
it as Yellow. We have seen yellow examples from older models, this new part coming
out of 2014+ era sets is not the same shade. And yet there is no counterpart
(nor should there be, 100% of the sets are showing BLO). Out of over 128 pieces
we have obtained from MISB sets, not a single one is proper Yellow. This seems
to be a problem, as every time we inventory a set, we have to address this discrepancy.
|
The color of those parts is not Bright Light Orange. They are a poorly dyed variation
of Yellow that approaches the color of Bright Light Orange. LEGO shows that this
part was always made in Yellow and not Bright Light Orange. The inventories here
should be corrected to make sure they are all listed as Yellow. Each seller can
then list that their supply of them is not the typical Yellow, but the darker
variation.
Randy
|
Since when does TLG's assessment of color factor in to the inventory status
on BrickLink? If that were the case DBG LBG and RB would not exist as colors.
|
Umm, every time?  DBG, LBG, and RB (LEGO colors Dark Stone Grey, Medium Stone
Grey, and Reddish Brown respectively) are all considered different colors by
LEGO compared to their old counterparts (LEGO colors Dark Grey, Grey, and Earth
Orange). BrickLink also recognizes all of these six colors separately. I truly
don't understand what you are getting at here.
| | I agree that what you're saying is the way it is, currently. What I do not
agree with is why. Why should every seller list their supply as not being typical
yellow, when that is the case 100% of the time (at least for 2014-2018 era sets
we have inventoried).
|
It was just a suggestion, since the case you describe is, in fact, *not* 100%
of the time.
| | I made this post because I believe there should be a note on the part page to
address this. There are several sets which do supposedly include this part in
BLO, and so I would ask you, do those sets actually contain a part which is markedly
different than the Yellow ones we have pulled out of sets?
|
Your original post said nothing about adding a catalog note to the part. And
once again, the color is neither Bright Light Orange nor Yellow. Yes, it is markedly
different from Yellow, but a seller adding a note to their own supply of said
parts would have sufficed as a solution.
| | As an aside, there are far more frivolous notations (as the notations present
with part 3626b, for example). It is my belief that the c-admins are unaware
of this issue, so I am bringing it to their attention. I highly doubt the ideal
solution is what you say it is.
|
Maybe not an ideal solution in your opinion, but a solution none-the-less. I
don't consider a catalog note any more ideal.
| | This part is not yellow, period. And there are a lot of variations with the color Yellow, true, but this is not one of them.
|
Yes, this is one of them.
Randy
|
|
| Author: | bb393434 | | Posted: | Sep 27, 2018 09:53 | | Subject: | Re: 2853 Technic Crankshaft | | Viewed: | 33 times | | Topic: | Inventories | |
|
| In Inventories, StormChaser writes:
| |
After reading the responses to your original post and seeing the photo generously
supplied by Abels_Bricks, I agree. I have standardized all inventories to remove
bright light orange for this part and the piston head because they are clearly
not BLO. Those parts now only appear in inventories in yellow.
If at some point in the future a new color is added to the catalog to account
for these two parts, then we can go in and change all the necessary inventories.
For now, though, this seems like the most sensible solution.
|
That's terrific, thanks!
|
|
| Author: | StormChaser | | Posted: | Sep 27, 2018 04:17 | | Subject: | Re: 2853 Technic Crankshaft | | Viewed: | 36 times | | Topic: | Inventories | |
|
| In Inventories, Lifelong writes:
| | I made this post because I believe there should be a note on the part page to
address this.
|
After reading the responses to your original post and seeing the photo generously
supplied by Abels_Bricks, I agree. I have standardized all inventories to remove
bright light orange for this part and the piston head because they are clearly
not BLO. Those parts now only appear in inventories in yellow.
I have also requested that a catalog note be added to both parts mentioning the
color variation:
https://www.bricklink.com/message.asp?ID=1108109
If at some point in the future a new color is added to the catalog to account
for these two parts, then we can go in and change all the necessary inventories.
For now, though, this seems like the most sensible solution.
|
|
| Author: | Abels_Bricks | | Posted: | Sep 27, 2018 03:00 | | Subject: | Re: 2853 Technic Crankshaft | | Viewed: | 27 times | | Topic: | Inventories | |
|
| In Inventories, Lifelong writes:
| | In Inventories, samsam2 writes:
| | Is the part exactly the color of other Bright Light Orange parts or is it neither
Yellow nor BLO, but closer to BLO than to Yellow?
|
In my opinion it is neither color, certainly the 2853s seem to be between the
two (as previously mentioned, improperly dyed yellow). I have found one other
part so far that is similar, which are yellow technic axles. I think a note to
let shoppers know about the issue is necessary, since those looking to complete
older models will be in for a surprise.
Additionally, the 3 or so sets that have been inventoried with the part in BLO,
may be erroneous as whoever did that inventory may have interpreted the crankshaft
as being BLO when really it is neither yellow nor BLO. However it is the "soft"
matte plastic type, which tends to run a bit light in general, so I would be
more inclined to place it in the BLO category, and have listed it as such, until
I see evidence of a true BLO crankshaft.
But NONE of the 120+ crankshafts we have pulled are actually yellow, the only
yellow examples I have found were present in some early 1990s-era display models
we have collected.
|
Thought I would check on these parts from a new set I have been parting out and
the colour difference is quite noticeable. I wonder if a new colour should be
set up for this as I agree that buyers purchasing for older sets are going to
be confused.
The crank arms do have more of a matt finish but are definitely darker than the
yellow as are the piston heads.
(the 1x4 plate is BLO)
regards
David
|
|
|
| Author: | bb393434 | | Posted: | Sep 26, 2018 22:25 | | Subject: | Re: 2853 Technic Crankshaft | | Viewed: | 34 times | | Topic: | Inventories | |
|
| In Inventories, samsam2 writes:
| | Is the part exactly the color of other Bright Light Orange parts or is it neither
Yellow nor BLO, but closer to BLO than to Yellow?
|
In my opinion it is neither color, certainly the 2853s seem to be between the
two (as previously mentioned, improperly dyed yellow). I have found one other
part so far that is similar, which are yellow technic axles. I think a note to
let shoppers know about the issue is necessary, since those looking to complete
older models will be in for a surprise.
Additionally, the 3 or so sets that have been inventoried with the part in BLO,
may be erroneous as whoever did that inventory may have interpreted the crankshaft
as being BLO when really it is neither yellow nor BLO. However it is the "soft"
matte plastic type, which tends to run a bit light in general, so I would be
more inclined to place it in the BLO category, and have listed it as such, until
I see evidence of a true BLO crankshaft.
But NONE of the 120+ crankshafts we have pulled are actually yellow, the only
yellow examples I have found were present in some early 1990s-era display models
we have collected.
|
|
| Author: | samsam2 | | Posted: | Sep 26, 2018 19:26 | | Subject: | Re: 2853 Technic Crankshaft | | Viewed: | 35 times | | Topic: | Inventories | |
|
| Is the part exactly the color of other Bright Light Orange parts or is it neither
Yellow nor BLO, but closer to BLO than to Yellow?
|
|
| Author: | bb393434 | | Posted: | Sep 26, 2018 18:26 | | Subject: | Re: 2853 Technic Crankshaft | | Viewed: | 47 times | | Topic: | Inventories | |
|
| In Inventories, randyf writes:
| | In Inventories, Lifelong writes:
| | Not to sound like Jerry Seinfeld, but "what's the deal" with this part in
this color? Is it Yellow or Bright Light Orange? Every single set that we have
pulled this part out of has been BLO despite the fact that the BL cat identifies
it as Yellow. We have seen yellow examples from older models, this new part coming
out of 2014+ era sets is not the same shade. And yet there is no counterpart
(nor should there be, 100% of the sets are showing BLO). Out of over 128 pieces
we have obtained from MISB sets, not a single one is proper Yellow. This seems
to be a problem, as every time we inventory a set, we have to address this discrepancy.
|
The color of those parts is not Bright Light Orange. They are a poorly dyed variation
of Yellow that approaches the color of Bright Light Orange. LEGO shows that this
part was always made in Yellow and not Bright Light Orange. The inventories here
should be corrected to make sure they are all listed as Yellow. Each seller can
then list that their supply of them is not the typical Yellow, but the darker
variation.
Randy
|
Since when does TLG's assessment of color factor in to the inventory status
on BrickLink? If that were the case DBG LBG and RB would not exist as colors.
I agree that what you're saying is the way it is, currently. What I do not
agree with is why. Why should every seller list their supply as not being typical
yellow, when that is the case 100% of the time (at least for 2014-2018 era sets
we have inventoried).
I made this post because I believe there should be a note on the part page to
address this. There are several sets which do supposedly include this part in
BLO, and so I would ask you, do those sets actually contain a part which is markedly
different than the Yellow ones we have pulled out of sets?
As an aside, there are far more frivolous notations (as the notations present
with part 3626b, for example). It is my belief that the c-admins are unaware
of this issue, so I am bringing it to their attention. I highly doubt the ideal
solution is what you say it is. This part is not yellow, period. And there are
a lot of variations with the color Yellow, true, but this is not one of them.
|
|
| Author: | randyf | | Posted: | Sep 26, 2018 17:32 | | Subject: | Re: 2853 Technic Crankshaft | | Viewed: | 39 times | | Topic: | Inventories | |
|
| In Inventories, Lifelong writes:
| | Not to sound like Jerry Seinfeld, but "what's the deal" with this part in
this color? Is it Yellow or Bright Light Orange? Every single set that we have
pulled this part out of has been BLO despite the fact that the BL cat identifies
it as Yellow. We have seen yellow examples from older models, this new part coming
out of 2014+ era sets is not the same shade. And yet there is no counterpart
(nor should there be, 100% of the sets are showing BLO). Out of over 128 pieces
we have obtained from MISB sets, not a single one is proper Yellow. This seems
to be a problem, as every time we inventory a set, we have to address this discrepancy.
|
The color of those parts is not Bright Light Orange. They are a poorly dyed variation
of Yellow that approaches the color of Bright Light Orange. LEGO shows that this
part was always made in Yellow and not Bright Light Orange. The inventories here
should be corrected to make sure they are all listed as Yellow. Each seller can
then list that their supply of them is not the typical Yellow, but the darker
variation.
Randy
|
|
| Author: | bb393434 | | Posted: | Sep 26, 2018 16:15 | | Subject: | 2853 Technic Crankshaft | | Viewed: | 97 times | | Topic: | Inventories | | Status: | Open | |
|
| Not to sound like Jerry Seinfeld, but "what's the deal" with this part in
this color? Is it Yellow or Bright Light Orange? Every single set that we have
pulled this part out of has been BLO despite the fact that the BL cat identifies
it as Yellow. We have seen yellow examples from older models, this new part coming
out of 2014+ era sets is not the same shade. And yet there is no counterpart
(nor should there be, 100% of the sets are showing BLO). Out of over 128 pieces
we have obtained from MISB sets, not a single one is proper Yellow. This seems
to be a problem, as every time we inventory a set, we have to address this discrepancy.
|
|
| Author: | StormChaser | | Posted: | Sep 24, 2018 13:43 | | Subject: | Re: Inventory Change Request for Set 1371-1 | | Viewed: | 26 times | | Topic: | Inventories | |
|
| In Inventories, stephannie writes:
| | But the BL parts inventory says we need 5 to build the set. It's not enough. Can we change this ?
|
Please post photos or scans of the set instructions showing where these parts
are used.
|
|
| Author: | SylvainLS | | Posted: | Sep 24, 2018 10:22 | | Subject: | Re: Inventory Change Request for Set 1371-1 | | Viewed: | 34 times | | Topic: | Inventories | |
|
| In Inventories, stephannie writes:
| | hello to all ! i am currently building the 1371 set
|
| | and, according to the official
instruction, 6 Black Brick, Modified 1 x 1 with Headlight ref 4070 are needed
(1 page 10, 1 page 11, 1 page 12, 1 page 14 and 2 page 16. But the BL parts inventory
says we need 5 to build the set. It's not enough. Can we change this ? have
a good day !
|
Hmm, I count only 5:
1 on step 6 page 8,
1 on step 7 page 9,
1 on step 10 page 12,
2 on step 12 page 14.
From https://www.lego.com/biassets/bi/4161787.pdf
|
|
| Author: | stephannie | | Posted: | Sep 24, 2018 09:57 | | Subject: | Inventory Change Request for Set 1371-1 | | Viewed: | 34 times | | Topic: | Inventories | | Status: | Open | |
|
| hello to all ! i am currently building the 1371 set and, according to the official
instruction, 6 Black Brick, Modified 1 x 1 with Headlight ref 4070 are needed
(1 page 10, 1 page 11, 1 page 12, 1 page 14 and 2 page 16. But the BL parts inventory
says we need 5 to build the set. It's not enough. Can we change this ? have
a good day !
stephannie
france
|
| Author: | StormChaser | | Posted: | Sep 23, 2018 17:39 | | Subject: | Re: Alternate Version of set 6386 | | Viewed: | 33 times | | Topic: | Inventories | |
|
| In Inventories, elias3 writes:
| | strange, the '99' only viewable on this page:
|
| | on this page I get the '1':
|
| | the other MID are also different
|
This is a bug on the newer inventory page which was reported some time ago.
|
|
| Author: | Hygrotus | | Posted: | Sep 23, 2018 08:18 | | Subject: | Re: Alternate Version of set 6386 | | Viewed: | 39 times | | Topic: | Inventories | |
|
| In Inventories, elias3 writes:
| | In Inventories, StormChaser writes:
| | In Inventories, David892 writes:
| | So I spent another hour trying to figure this out and I finally found out
that my instructions were different!. For the same set, my instructions were
telling me to use different pieces.
|
What is the part number printed on your copy of the set instructions? You will
find this on the front page at the lower right-hand corner of the complete set
image. Please post a photo or scan of this portion of the instructions showing
the number.
| | My question to ou guys is how can we document this? And is this something that
you guys see all the time with older LEGO sets?
|
It has been documented. The set inventory has been updated with the changes
you found and an inventory note was added. And yes, it's not too terribly
uncommon. There are over 100 known sets from as recently as last year which
have been redesigned for various reasons while the set was still in production.
I have asked for BrickLink to give us the ability to find these sets in the catalog.
So far, though, nothing has happened with my request.
|
Hi Robert
strange, the '99' only viewable on this page:
https://www.bricklink.com/catalogItemInv.asp?S=6386-1
on this page I get the '1':
https://www.bricklink.com/v2/catalog/catalogitem.page?S=6386-1#T=I
the other MID are also different
a glitch?
Stefaan
|
Interesting looks like in all inventories where "99" MID is used in this new
inventory page is is change to "1" MID. Checked only few from this list
https://brickset.com/sets/list-18333 for example
The same sitation as you described it.
|
|
| Author: | elias3 | | Posted: | Sep 23, 2018 07:02 | | Subject: | Re: Alternate Version of set 6386 | | Viewed: | 38 times | | Topic: | Inventories | |
|
| In Inventories, StormChaser writes:
| | In Inventories, David892 writes:
| | So I spent another hour trying to figure this out and I finally found out
that my instructions were different!. For the same set, my instructions were
telling me to use different pieces.
|
What is the part number printed on your copy of the set instructions? You will
find this on the front page at the lower right-hand corner of the complete set
image. Please post a photo or scan of this portion of the instructions showing
the number.
| | My question to ou guys is how can we document this? And is this something that
you guys see all the time with older LEGO sets?
|
It has been documented. The set inventory has been updated with the changes
you found and an inventory note was added. And yes, it's not too terribly
uncommon. There are over 100 known sets from as recently as last year which
have been redesigned for various reasons while the set was still in production.
I have asked for BrickLink to give us the ability to find these sets in the catalog.
So far, though, nothing has happened with my request.
|
Hi Robert
strange, the '99' only viewable on this page:
https://www.bricklink.com/catalogItemInv.asp?S=6386-1
on this page I get the '1':
https://www.bricklink.com/v2/catalog/catalogitem.page?S=6386-1#T=I
the other MID are also different
a glitch?
Stefaan
|
|
| Author: | elias3 | | Posted: | Sep 23, 2018 06:53 | | Subject: | Re: Alternate Version of set 6386 | | Viewed: | 32 times | | Topic: | Inventories | |
|
| In Inventories, David892 writes:
| | Good evening and thanks for the fast reply!
The number at the bottom right corner is 120499. See attached picture.
Great job on documenting the variation!
|
Hi
Good found!
unfortunately, both versions have the same instructions code
Version on Peeron with the same code '120499':
http://peeron.com/scans/6386-1/1
http://peeron.com/scans/6386-1/3
Stefaan
|
| Author: | David892 | | Posted: | Sep 22, 2018 21:21 | | Subject: | Re: Alternate Version of set 6386 | | Viewed: | 36 times | | Topic: | Inventories | |
|
| Good evening and thanks for the fast reply!
The number at the bottom right corner is 120499. See attached picture.
Great job on documenting the variation!
|
|
|
| Author: | 69transamman | | Posted: | Sep 22, 2018 20:28 | | Subject: | Re: set 7676 | | Viewed: | 37 times | | Topic: | Inventories | |
|
| In Help, mophead writes:
| | Am I to believe set #7676 (as shown in sets and their parts info) that part #4515
listed as only 4 pieces in set. Yet by all indications there are six stickers?
peeron also lists only four pieces in set. I know you cannot apply sticker to
both sides of that piece. Anybody know what I am dealing with here? trying to
put it together...not sure how many of 4515 I really need.
Thanks
|
Only 4 part #4515 are needed to complete the build for this set. This set came
with optional stickers in case you have more than one and want to display them
together but have them be distinctive. I found the following at brickset;
"Take the battle to the Separatists with the Republic Attack Gunship! This heavily
armed and armored Clone Wars troop carrier can fly and land in any battlefield
or hostile terrain. Features include opening troop bay doors, removable command
station and healing chamber, positionable cannons, spy droids, flick missiles,
a speeder bike that deploys from the back, and multiple decals to create different
gunships for your army. But will even Obi-Wan Kenobi and Plo Koon be enough
to stop the sinister Asajj Ventress and her double Sith lightsabers? Includes
Obi-Wan Kenobi, Plo Koon, Asajj Ventress, Commander Cody and Clone Trooper minifigures!
Side troop bay doors open! Open the front side compartment to remove the command
station! The 2 cockpits in front and the 2 on the wings open! Features 8 positionable
flick-fire missiles on top and 2 rotating missiles in front! Back hatch opens
to deploy the speeder bike! Open the compartment on top to access the spy droids!
Measures 14" (36cm) long, 17" (43cm) wide and 7" (18cm) high"
If I were building this for myself I would get an extra pair of 4515's and
apply the extra stickers for easier storage.
Howard
|
|
| Author: | cplonsdale | | Posted: | Sep 22, 2018 20:23 | | Subject: | Re: set 7676 | | Viewed: | 24 times | | Topic: | Inventories | |
|
| Surely its a choice of which stickers to apply to the front section so that you
can have 2 versions with different nose art.
|
|
| Author: | SylvainLS | | Posted: | Sep 22, 2018 19:45 | | Subject: | Re: set 7676 | | Viewed: | 28 times | | Topic: | Inventories | |
|
| In Help, mophead writes:
| | Am I to believe set #7676 (as shown in sets and their parts info) that part #4515
listed as only 4 pieces in set. Yet by all indications there are six stickers?
peeron also lists only four pieces in set. I know you cannot apply sticker to
both sides of that piece. Anybody know what I am dealing with here? trying to
put it together...not sure how many of 4515 I really need.
Thanks
|
Yes, strange, 4 plain slopes in the Regular section but 6 stickered slopes in
the Counterpart section.
The instructions say 4. But stickers just magically appear and p038 doesn’t
seem to be used.
I’d say you can choose which pair of stickers to apply on the front?
|
|
| Author: | mophead | | Posted: | Sep 22, 2018 19:18 | | Subject: | set 7676 | | Viewed: | 86 times | | Topic: | Inventories | | Status: | Open | |
|
| Am I to believe set #7676 (as shown in sets and their parts info) that part #4515
listed as only 4 pieces in set. Yet by all indications there are six stickers?
peeron also lists only four pieces in set. I know you cannot apply sticker to
both sides of that piece. Anybody know what I am dealing with here? trying to
put it together...not sure how many of 4515 I really need.
Thanks
|
|
| Author: | StormChaser | | Posted: | Sep 22, 2018 15:18 | | Subject: | Re: Alternate Version of set 6386 | | Viewed: | 45 times | | Topic: | Inventories | |
|
| In Inventories, David892 writes:
| | So I spent another hour trying to figure this out and I finally found out
that my instructions were different!. For the same set, my instructions were
telling me to use different pieces.
|
What is the part number printed on your copy of the set instructions? You will
find this on the front page at the lower right-hand corner of the complete set
image. Please post a photo or scan of this portion of the instructions showing
the number.
| | My question to ou guys is how can we document this? And is this something that
you guys see all the time with older LEGO sets?
|
It has been documented. The set inventory has been updated with the changes
you found and an inventory note was added. And yes, it's not too terribly
uncommon. There are over 100 known sets from as recently as last year which
have been redesigned for various reasons while the set was still in production.
I have asked for BrickLink to give us the ability to find these sets in the catalog.
So far, though, nothing has happened with my request.
|
|
| Author: | SylvainLS | | Posted: | Sep 22, 2018 15:16 | | Subject: | Re: Alternate Version of set 6386? :O | | Viewed: | 42 times | | Topic: | Inventories | |
|
| In Inventories, David892 writes:
| | […]
My question to ou guys is how can we document this? And is this something that
you guys see all the time with older LEGO sets?
|
For now, they are handled with the special Alternate group 99:
— add the Match ID 99 to the Regular parts that change¹ or that you don’t have
in your version,
— add the parts that change¹ or that are only in your version as Alternate with
a Match ID of 99,
— add a note.
(¹ If it’s just the quantity of a part that changes, the part is both present
as Regular and Alternate with different quantities.)
E.g. Wall-E has two versions, the neck having been made more stable
|
|
| Author: | David892 | | Posted: | Sep 22, 2018 14:17 | | Subject: | Alternate Version of set 6386? :O | | Viewed: | 100 times | | Topic: | Inventories | | Status: | Open | |
|
| Good afternoon all,
I was rebuilding my 6386 (Police Command Station) set yesterday and to make sure
I had all the pieces I consulted the inventory. While building the model, I realised
that the inventory was not accurate and started double checking everything once
again. To my surprise, I had all the pieces listed on Bricklink but I just couldn't
complete the helicopter.
So I spent another hour trying to figure this out and I finally found out
that my instructions were different!. For the same set, my instructions were
telling me to use different pieces.
Please see image attached.
My question to ou guys is how can we document this? And is this something that
you guys see all the time with older LEGO sets?
Thanks a lot!
|
|
|
| Author: | leggodtshop | | Posted: | Sep 15, 2018 11:07 | | Subject: | Re: 3003 and 3003old | | Viewed: | 36 times | | Topic: | Inventories | |
|
| In Catalog Requests, WFMTF writes:
| | As far as I know none of the Trans- and Glittercolors have inside supports.
WHY do these colors appear as known colors on item 3003 and do not appear as
none colors on item 3003old - without inside supports.
This is a mismatch of catalog criterias - seen from my view.
I think that a short explanation in the additional notes would be good.
Thank you for a response
Waltraud
|
3003old is an odd duck if you ask me. 3002old and 3001old do not have Inside
Supports mentioned in the name but they do exist with Inside Supports (at least
3001old does). 3003 however does not exist without Cross Supports, still they
created a 3003old as if it were somehow similar as 3002old and 3001old but it
is not. I have missed the creation of 3003old so there might be a perfectly valid
reason for it but imo so far it creates more confusion, as can be noted with
your question as example.
On the other hand, it is hardly doable to be complete on this matter. More differences
do exist and differences combinations as well. Where does it end?
Interesting to learn the answer too
Arnoud
|
|
| Author: | WFMTF | | Posted: | Sep 15, 2018 09:15 | | Subject: | Re: 3003 and 3003old | | Viewed: | 28 times | | Topic: | Inventories | |
|
| In Catalog Requests, WFMTF writes:
| | As far as I know none of the Trans- and Glittercolors have inside supports.
WHY do these colors appear as known colors on item 3003 and do not appear as
none colors on item 3003old - without inside supports.
This is a mismatch of catalog criterias - seen from my view.
I think that a short explanation in the additional notes would be good.
Thank you for a response
Waltraud
|
meant "known" - sorry for this
|
|
| Author: | WFMTF | | Posted: | Sep 15, 2018 09:07 | | Subject: | 3003 and 3003old | | Viewed: | 84 times | | Topic: | Inventories | | Status: | Open | |
|
| As far as I know none of the Trans- and Glittercolors have inside supports.
WHY do these colors appear as known colors on item 3003 and do not appear as
none colors on item 3003old - without inside supports.
This is a mismatch of catalog criterias - seen from my view.
I think that a short explanation in the additional notes would be good.
Thank you for a response
Waltraud
|
| Author: | Abels_Bricks | | Posted: | Sep 12, 2018 16:19 | | Subject: | Re: SET 10765 | | Viewed: | 23 times | | Topic: | Inventories | |
|
| In New Sets, Poppie123 writes:
| | Hi There, Please can someone assist to auto part-out set 10765? Its not yet
available for part-out on Bricklink.
|
Simple set to part out, done now just waiting for the inventory to be approved.
Regards
David
|
| Author: | Hygrotus | | Posted: | Sep 9, 2018 12:26 | | Subject: | Re: Note to be added for minifigre ac009 | | Viewed: | 16 times | | Topic: | Inventories | |
|
| In Inventories, odurt writes:
| | Hi,
For the following minifigure, I have a 'c' style head.
Can you please add this note:
This minifigure has been found with both the 'b' and 'c' style
head.
as per
Thanks,
Sebastien
|
Done, thanks for info.
|
|
| Author: | odurt | | Posted: | Sep 9, 2018 12:17 | | Subject: | Note to be added for minifigre ac009 | | Viewed: | 65 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi,
For the following minifigure, I have a 'c' style head.
Can you please add this note:
This minifigure has been found with both the 'b' and 'c' style
head.
as per
Thanks,
Sebastien
|
|
| Author: | WhiteVanMan | | Posted: | Sep 8, 2018 12:54 | | Subject: | Re: SET 10765 | | Viewed: | 44 times | | Topic: | Inventories | |
|
| In New Sets, Poppie123 writes:
| | Hi There, Please can someone assist to auto part-out set 10765? Its not yet
available for part-out on Bricklink.
|
If you have the set, why not submit the set's inventory to the Catalogue,
as this will enable you to part it out...?
You see, ALL of the inventories that make up this catalogue have been submitted
by other people, myself included...
Regards,
Paul
|
| Author: | Poppie123 | | Posted: | Sep 8, 2018 12:24 | | Subject: | SET 10765 | | Viewed: | 88 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi There, Please can someone assist to auto part-out set 10765? Its not yet
available for part-out on Bricklink.
|
|
| Author: | TyresOFlaherty | | Posted: | Sep 5, 2018 13:12 | | Subject: | Re: Inventory for comcon057-1 | | Viewed: | 40 times | | Topic: | Inventories | |
|
| Looks like tlm102 (SDCC Angry Kitty) is still awaiting approval. I am planning
on that being a counterpart in the comcon057-1 set. Everything else seems to
have gone through ok, except that one. Just wanted to make sure I'd done
everything right there.
Thanks!
In Inventories, TyresOFlaherty writes:
| | No worries! Thanks for the quick reply. Not breathing down anyone's neck,
just wanted to make sure I was doing everything right.
Have a great weekend!
In Inventories, axaday writes:
| | In Inventories, TyresOFlaherty writes:
| | Perfect, thanks for the quick reply! So at this stage, I have:
1. Reserved the set (for inventory)
2. Added all the new parts (pending approval)
3. Added new entries for the minifig/counterpart minifig (tlm101, tlm102, pending
approval)
4. Added photos for parts/minifigs (pending approval)
It seems I can't add the minifigs to set inventory until they've been
approved, so now I just wait? Did I miss any steps? Just want to make sure I'm
going about this in the right way.
Thanks again for everyone's help!
In Inventories, axaday writes:
| | In Inventories, TyresOFlaherty writes:
| | So I'm planning on making a minifig inventory for this set (as well as adding
an additional counterpart for the alternate face, same as comcon040).
As far as minifig names go, since these are the first two released for The Lego
Movie 2, should I either....
a. Continue with the tlm000 numbering system (starting with tlm101), OR
b. Start a new series with tlm2001
Or is there a place where this is already determined?
Thanks!
In Inventories, StormChaser writes:
|
All the superheroes from all the Marvel movies and also DC and things not in
an actual movie are all in the same numbering series. I think things from The
Lego Movie 2 can be numbered with 1.
|
|
Sounds right. One of the Catmins is in the US and the other in Deutscheland,
so sometimes it is like we have 24/7 coverage, but just remember they've
got lives and jobs and what not. So sometimes nothing happens until after you
go to bed. I just looked at your pending stuff and no problems jump out at me.
Now you just wait for the wheels of the machine to turn.
|
|
|
|
| Author: | Hygrotus | | Posted: | Sep 5, 2018 03:52 | | Subject: | Re: 75203-1 | | Viewed: | 23 times | | Topic: | Inventories | |
|
| In Inventories, nectara writes:
| | In Inventories, Hygrotus writes:
| | In Catalog Inventories, nectara writes:
| | Hi
What's going on with 75203?
More than one month still ,,Inventory In Progress,,
Regards
Nectara
|
https://www.youtube.com/watch?v=vfc4eim6XCA
Not only this one from SW is still missing inventory, also 75220 and 75221.
BTW Sandcrawler was added on the beggining of July, so almost two months without
inventory now
If you want to do it I can release this set to you to inventory it?
|
Hi
I have no idea how to do it
Regards
Nectara
|
Done
|
|
| Author: | StormChaser | | Posted: | Sep 3, 2018 17:15 | | Subject: | Sources for Set Inventories | | Viewed: | 77 times | | Topic: | Inventories | | Status: | Open | |
|
| Since around February of this year we have been informally requiring that all
new inventories (meaning recent sets) be submitted from sealed set contents.
We believe this rule greatly reduces the error rate in inventories. If someone
has a brand new set in hand, then parts, part colors, part variants, and extras
can be more accurately determined.
The only concern was that the requirement would result in a reduction in inventories
being added. Fortunately, this has not occurred. There have been 580 sets released
so far this year and only 73 of those sets don't have inventories on BrickLink
(about 12.5%). We can always do better, but 87.5% of 2018 sets inventoried is
still pretty decent (especially considering what an improvement this is from
the past).
Therefore, we have decided to make this requirement a permanent rule for new
sets going forward. The way it works is this: if the set has been in the BrickLink
catalog less than one year, then the only source accepted for its inventory is
a sealed set. After that, any source is acceptable. You can see the new rule
here under the heading Source:
https://www.bricklink.com/help.asp?helpID=199
The only problem with this rule are sets like this:
We may consider listing these sets as exceptions to the rule, but for now they
are covered.
|
|
| Author: | axaday | | Posted: | Sep 1, 2018 18:45 | | Subject: | Re: Inventory Pending Approval (?) | | Viewed: | 50 times | | Topic: | Inventories | |
|
| In Inventories, StoreToys4Boys writes:
| | In Inventories, tEoS writes:
| | Admins are not real humans, so they have nothing better to do than work on BL
24/7. Duh!
Being a volunteer inventory admin has to be the worst. Not only are you expected
to give your time for free, but also spend $1000's per year on new sets at
MSRP to do inventories.
Oh, and to the OP: 3% fees is the exact same I paid when I started selling here
in 2003. Please find me another company that you can say the same about. Ebay
was 10% the last time I sold something.
| | Not sure, 21h13 (9:13pm) in Poland now (in France too), but he might still have
something else to do on a Saturday night
|
|
I would say like every time a user is complaining of something here there always
someone who come back with poor argument.I was complaining of time it take to
valid inventory of a set and now your almost to tell me to go somewhere else
to sell.I don't known you,you are a seller and doesn't look like a admin
on that site.
If you do the inventory for free its your problem.Don't come here to complain
to me your doing it wrong because your doing it for free.
I invest a lot of money in my business every month and i give a really good service
to my customer but i expect the same from my providers.If you are in the process
of doing inventory for BL you should treat me like a customer and not telling
me to go sell somewhere else.That's call arrogance.
By the way BO is charging 2.5% but service is much better then here.Admin threat
you like a customer not like a competitor.Don't worry i already have a account
there.
For all the above answers,there is none from a real admin.That's the problem
on BL.
Nobody answer for anything on this site
|
At the end of the day, you don't what you are paying your 3% fee to Bricklink
for and it doesn't include a professional having the inventories ready on
Day 1. It just isn't part of the deal. And you are still here because there
is something about Bricklink that you still prefer. I have never used BrickOwl,
so I have no idea, but I expect it is the larger customer base that Bricklink
brings to you.
If you just need to bellyache, that's totally fine with me.
|
|
| Author: | StoreToys4Boys | | Posted: | Sep 1, 2018 16:50 | | Subject: | Re: Inventory Pending Approval (?) | | Viewed: | 47 times | | Topic: | Inventories | |
|
| In Inventories, StormChaser writes:
| | In Inventories, StoreToys4Boys writes:
| | Can anybody can clarify why it take soo long for the inventory of a set to be
approve.
|
It is because we are not doing well at soliciting community contributions.
| | Ex:75203 is been out for a month and other site have all inventory done.
|
The three major sites I'm aware of which provide inventories are Brickset,
Rebrickable, and Brick Owl.
All three sites have inventories for this set. The official part count of the
set is 255 parts. For each site, here are the number of parts they list in the
set as of right now:
Brickset: 248 parts
Brick Owl: 251 parts
Rebrickable: 248 parts
We make take longer on BrickLink, but when we're finished you'll have
an inventory which includes the correct number of parts.
| | I think with the sales amount that past here,we should expect a little bit of
service.
|
You're right about that. I apologize that we still haven't achieved
the ability to have complete, accurate inventories available on the day the set
is released. When you require that new inventories be created from sealed set
contents (as we do now) and after that you have people like me double-checking
the work to ensure its accuracy, then there is unavoidable delay. Our goal is
to reduce that delay as much as possible.
I will say that the delay has gotten much better within the last year and we
hope to continue to improve.
| | Please don't reply its a voluntary work that user are doing the inventory.It
should not be voluntary first of all.This site is doing money.With the number
of set that coming out every month ,i think somebody should be payed and doing
this full time.
|
I agree that people who take the time to add inventories to the website should
be compensated for their efforts in some way.
| | I just resign myself to spend a hour to enter and verify that set with brickstock.
|
I've never used BrickStock, so I don't know how it works.
|
Thank you StormChaser,happy to see Admin are still around,but more improvement
has to come from this site.
|
|
| Author: | StoreToys4Boys | | Posted: | Sep 1, 2018 16:42 | | Subject: | Re: Inventory Pending Approval (?) | | Viewed: | 36 times | | Topic: | Inventories | |
|
| In Inventories, tEoS writes:
| | Admins are not real humans, so they have nothing better to do than work on BL
24/7. Duh!
Being a volunteer inventory admin has to be the worst. Not only are you expected
to give your time for free, but also spend $1000's per year on new sets at
MSRP to do inventories.
Oh, and to the OP: 3% fees is the exact same I paid when I started selling here
in 2003. Please find me another company that you can say the same about. Ebay
was 10% the last time I sold something.
| | Not sure, 21h13 (9:13pm) in Poland now (in France too), but he might still have
something else to do on a Saturday night
|
|
I would say like every time a user is complaining of something here there always
someone who come back with poor argument.I was complaining of time it take to
valid inventory of a set and now your almost to tell me to go somewhere else
to sell.I don't known you,you are a seller and doesn't look like a admin
on that site.
If you do the inventory for free its your problem.Don't come here to complain
to me your doing it wrong because your doing it for free.
I invest a lot of money in my business every month and i give a really good service
to my customer but i expect the same from my providers.If you are in the process
of doing inventory for BL you should treat me like a customer and not telling
me to go sell somewhere else.That's call arrogance.
By the way BO is charging 2.5% but service is much better then here.Admin threat
you like a customer not like a competitor.Don't worry i already have a account
there.
For all the above answers,there is none from a real admin.That's the problem
on BL.
Nobody answer for anything on this site
|
|
| Author: | StormChaser | | Posted: | Sep 1, 2018 16:33 | | Subject: | Re: Inventory Pending Approval (?) | | Viewed: | 38 times | | Topic: | Inventories | |
|
| In Inventories, StoreToys4Boys writes:
| | Can anybody can clarify why it take soo long for the inventory of a set to be
approve.
|
It is because we are not doing well at soliciting community contributions.
| | Ex:75203 is been out for a month and other site have all inventory done.
|
The three major sites I'm aware of which provide inventories are Brickset,
Rebrickable, and Brick Owl.
All three sites have inventories for this set. The official part count of the
set is 255 parts. For each site, here are the number of parts they list in the
set as of right now:
Brickset: 248 parts
Brick Owl: 251 parts
Rebrickable: 248 parts
We make take longer on BrickLink, but when we're finished you'll have
an inventory which includes the correct number of parts.
| | I think with the sales amount that past here,we should expect a little bit of
service.
|
You're right about that. I apologize that we still haven't achieved
the ability to have complete, accurate inventories available on the day the set
is released. When you require that new inventories be created from sealed set
contents (as we do now) and after that you have people like me double-checking
the work to ensure its accuracy, then there is unavoidable delay. Our goal is
to reduce that delay as much as possible.
I will say that the delay has gotten much better within the last year and we
hope to continue to improve.
| | Please don't reply its a voluntary work that user are doing the inventory.It
should not be voluntary first of all.This site is doing money.With the number
of set that coming out every month ,i think somebody should be payed and doing
this full time.
|
I agree that people who take the time to add inventories to the website should
be compensated for their efforts in some way.
| | I just resign myself to spend a hour to enter and verify that set with brickstock.
|
I've never used BrickStock, so I don't know how it works.
|
|
| Author: | tEoS | | Posted: | Sep 1, 2018 15:43 | | Subject: | Re: Inventory Pending Approval (?) | | Viewed: | 38 times | | Topic: | Inventories | |
|
| Admins are not real humans, so they have nothing better to do than work on BL
24/7. Duh!
Being a volunteer inventory admin has to be the worst. Not only are you expected
to give your time for free, but also spend $1000's per year on new sets at
MSRP to do inventories.
Oh, and to the OP: 3% fees is the exact same I paid when I started selling here
in 2003. Please find me another company that you can say the same about. Ebay
was 10% the last time I sold something.
| | Not sure, 21h13 (9:13pm) in Poland now (in France too), but he might still have
something else to do on a Saturday night
|
|
|
| Author: | SylvainLS | | Posted: | Sep 1, 2018 15:13 | | Subject: | Re: Inventory Pending Approval (?) | | Viewed: | 37 times | | Topic: | Inventories | |
|
| In Inventories, axaday writes:
| | […] But he lives in Poland and is probably in bed now.
|
Not sure, 21h13 (9:13pm) in Poland now (in France too), but he might still have
something else to do on a Saturday night
|
| Author: | axaday | | Posted: | Sep 1, 2018 14:47 | | Subject: | Re: Inventory Pending Approval (?) | | Viewed: | 39 times | | Topic: | Inventories | |
|
| In Inventories, StoreToys4Boys writes:
| | Ex:75203 is been out for a month and other site have all inventory done.
|
That one is almost complete. One of our actual Inventory Admins did the inventory.
He just lacks entering the extras. But he lives in Poland and is probably in
bed now.
|
|
| Author: | axaday | | Posted: | Sep 1, 2018 14:45 | | Subject: | Re: Inventory Pending Approval (?) | | Viewed: | 31 times | | Topic: | Inventories | |
|
| In Inventories, StoreToys4Boys writes:
| | Please don't reply its a voluntary work that user are doing the inventory.It
should not be voluntary first of all.This site is doing money.With the number
of set that coming out every month ,i think somebody should be payed and doing
this full time.
I just resign myself to spend a hour to enter and verify that set with brickstock.
|
Man. And that's AFTER whatever time it took you to type out this question
that you specifically do not want the answer to.
|
|
| Author: | StoreToys4Boys | | Posted: | Sep 1, 2018 14:37 | | Subject: | Inventory Pending Approval (?) | | Viewed: | 96 times | | Topic: | Inventories | | Status: | Open | |
|
| Can anybody can clarify why it take soo long for the inventory of a set to be
approve.
For doing sales,we need this inventory to be approve quickly.
Ex:75203 is been out for a month and other site have all inventory done.
I think with the sales amount that past here,we should expect a little bit of
service.
We are paying 3% on every sales and i think we should received a minimum of service.
Please don't reply its a voluntary work that user are doing the inventory.It
should not be voluntary first of all.This site is doing money.With the number
of set that coming out every month ,i think somebody should be payed and doing
this full time.
I just resign myself to spend a hour to enter and verify that set with brickstock.
|
|
| Author: | TyresOFlaherty | | Posted: | Aug 31, 2018 19:42 | | Subject: | Re: Inventory for comcon057-1 | | Viewed: | 30 times | | Topic: | Inventories | |
|
| No worries! Thanks for the quick reply. Not breathing down anyone's neck,
just wanted to make sure I was doing everything right.
Have a great weekend!
In Inventories, axaday writes:
| | In Inventories, TyresOFlaherty writes:
| | Perfect, thanks for the quick reply! So at this stage, I have:
1. Reserved the set (for inventory)
2. Added all the new parts (pending approval)
3. Added new entries for the minifig/counterpart minifig (tlm101, tlm102, pending
approval)
4. Added photos for parts/minifigs (pending approval)
It seems I can't add the minifigs to set inventory until they've been
approved, so now I just wait? Did I miss any steps? Just want to make sure I'm
going about this in the right way.
Thanks again for everyone's help!
In Inventories, axaday writes:
| | In Inventories, TyresOFlaherty writes:
| | So I'm planning on making a minifig inventory for this set (as well as adding
an additional counterpart for the alternate face, same as comcon040).
As far as minifig names go, since these are the first two released for The Lego
Movie 2, should I either....
a. Continue with the tlm000 numbering system (starting with tlm101), OR
b. Start a new series with tlm2001
Or is there a place where this is already determined?
Thanks!
In Inventories, StormChaser writes:
|
All the superheroes from all the Marvel movies and also DC and things not in
an actual movie are all in the same numbering series. I think things from The
Lego Movie 2 can be numbered with 1.
|
|
Sounds right. One of the Catmins is in the US and the other in Deutscheland,
so sometimes it is like we have 24/7 coverage, but just remember they've
got lives and jobs and what not. So sometimes nothing happens until after you
go to bed. I just looked at your pending stuff and no problems jump out at me.
Now you just wait for the wheels of the machine to turn.
|
|
|
| Author: | axaday | | Posted: | Aug 31, 2018 19:04 | | Subject: | Re: Inventory for comcon057-1 | | Viewed: | 20 times | | Topic: | Inventories | |
|
| In Inventories, TyresOFlaherty writes:
| | Perfect, thanks for the quick reply! So at this stage, I have:
1. Reserved the set (for inventory)
2. Added all the new parts (pending approval)
3. Added new entries for the minifig/counterpart minifig (tlm101, tlm102, pending
approval)
4. Added photos for parts/minifigs (pending approval)
It seems I can't add the minifigs to set inventory until they've been
approved, so now I just wait? Did I miss any steps? Just want to make sure I'm
going about this in the right way.
Thanks again for everyone's help!
In Inventories, axaday writes:
| | In Inventories, TyresOFlaherty writes:
| | So I'm planning on making a minifig inventory for this set (as well as adding
an additional counterpart for the alternate face, same as comcon040).
As far as minifig names go, since these are the first two released for The Lego
Movie 2, should I either....
a. Continue with the tlm000 numbering system (starting with tlm101), OR
b. Start a new series with tlm2001
Or is there a place where this is already determined?
Thanks!
In Inventories, StormChaser writes:
|
All the superheroes from all the Marvel movies and also DC and things not in
an actual movie are all in the same numbering series. I think things from The
Lego Movie 2 can be numbered with 1.
|
|
Sounds right. One of the Catmins is in the US and the other in Deutscheland,
so sometimes it is like we have 24/7 coverage, but just remember they've
got lives and jobs and what not. So sometimes nothing happens until after you
go to bed. I just looked at your pending stuff and no problems jump out at me.
Now you just wait for the wheels of the machine to turn.
|
|
| Author: | TyresOFlaherty | | Posted: | Aug 31, 2018 18:17 | | Subject: | Re: Inventory for comcon057-1 | | Viewed: | 30 times | | Topic: | Inventories | |
|
| Perfect, thanks for the quick reply! So at this stage, I have:
1. Reserved the set (for inventory)
2. Added all the new parts (pending approval)
3. Added new entries for the minifig/counterpart minifig (tlm101, tlm102, pending
approval)
4. Added photos for parts/minifigs (pending approval)
It seems I can't add the minifigs to set inventory until they've been
approved, so now I just wait? Did I miss any steps? Just want to make sure I'm
going about this in the right way.
Thanks again for everyone's help!
In Inventories, axaday writes:
| | In Inventories, TyresOFlaherty writes:
| | So I'm planning on making a minifig inventory for this set (as well as adding
an additional counterpart for the alternate face, same as comcon040).
As far as minifig names go, since these are the first two released for The Lego
Movie 2, should I either....
a. Continue with the tlm000 numbering system (starting with tlm101), OR
b. Start a new series with tlm2001
Or is there a place where this is already determined?
Thanks!
In Inventories, StormChaser writes:
|
All the superheroes from all the Marvel movies and also DC and things not in
an actual movie are all in the same numbering series. I think things from The
Lego Movie 2 can be numbered with 1.
|
|
|
| Author: | axaday | | Posted: | Aug 31, 2018 16:51 | | Subject: | Re: Inventory for comcon057-1 | | Viewed: | 22 times | | Topic: | Inventories | |
|
| In Inventories, TyresOFlaherty writes:
| | So I'm planning on making a minifig inventory for this set (as well as adding
an additional counterpart for the alternate face, same as comcon040).
As far as minifig names go, since these are the first two released for The Lego
Movie 2, should I either....
a. Continue with the tlm000 numbering system (starting with tlm101), OR
b. Start a new series with tlm2001
Or is there a place where this is already determined?
Thanks!
In Inventories, StormChaser writes:
|
All the superheroes from all the Marvel movies and also DC and things not in
an actual movie are all in the same numbering series. I think things from The
Lego Movie 2 can be numbered with 1.
|
|
| Author: | TyresOFlaherty | | Posted: | Aug 31, 2018 16:44 | | Subject: | Re: Inventory for comcon057-1 | | Viewed: | 32 times | | Topic: | Inventories | |
|
| So I'm planning on making a minifig inventory for this set (as well as adding
an additional counterpart for the alternate face, same as comcon040).
As far as minifig names go, since these are the first two released for The Lego
Movie 2, should I either....
a. Continue with the tlm000 numbering system (starting with tlm101), OR
b. Start a new series with tlm2001
Or is there a place where this is already determined?
Thanks!
In Inventories, StormChaser writes:
|
|
| Author: | axaday | | Posted: | Aug 30, 2018 15:38 | | Subject: | Re: Inventory for comcon057-1 | | Viewed: | 25 times | | Topic: | Inventories | |
|
| In Inventories, TyresOFlaherty writes:
| | I have this set and wondered if I could help add inventory (and minifigs and
the "alternate" minifig"). Can someone point me in the right direction? I'm
quite good with graphics and would be more than happy to take clean photos of
the new elements/prints in this set.
Thanks!
|
My goodness, I didn't even realize this one existed.
|
|
|
| Author: | TyresOFlaherty | | Posted: | Aug 30, 2018 15:22 | | Subject: | Inventory for comcon057-1 | | Viewed: | 75 times | | Topic: | Inventories | | Status: | Open | |
|
| I have this set and wondered if I could help add inventory (and minifigs and
the "alternate" minifig"). Can someone point me in the right direction? I'm
quite good with graphics and would be more than happy to take clean photos of
the new elements/prints in this set.
Thanks!
|
|
| Author: | SteinchendeaIer | | Posted: | Aug 29, 2018 15:28 | | Subject: | Re: Inventory Request 41456 | | Viewed: | 21 times | | Topic: | Inventories | |
|
| thanks for the information. then I will try once if I can do it
In Inventories, StormChaser writes:
| | In Catalog Inventories, FloathBricks writes:
| | Hello everybody, the inventory is missing for the Unikitty Set 41456. Could this
be created please?
|
Yes, you can create the inventory here:
https://www.bricklink.com/catalogInvAdd.asp
However, you must have a brand new set in hand to create the inventory for this
set. Let us know if you run into any difficulties and need assistance.
|
|
|
| Author: | tEoS | | Posted: | Aug 28, 2018 13:02 | | Subject: | Re: Request update inventory on set 70567 | | Viewed: | 28 times | | Topic: | Inventories | |
|
| I still have 3 from this set that need inventories:
Betsy
Chan
Mystake
I can see about doing these later this week.
In Inventories, axaday writes:
| | It surely will be before very many month go by. The set is pretty new.
|
|
|
| Author: | axaday | | Posted: | Aug 28, 2018 12:39 | | Subject: | Re: Request update inventory on set 70567 | | Viewed: | 20 times | | Topic: | Inventories | |
|
| It surely will be before very many month go by. The set is pretty new.
In Inventories, Henk61 writes:
| | In Inventories, StormChaser writes:
| | In Catalog Inventories, Henk61 writes:
| | Hi,
Is it possible that the inventory of the set 70567 can be completed?
On 5 minifigs I am unable to see the parts because the "item consists of" is
not available.
|
I don't have this set, so I am unable to complete the inventory. The submitter
of the set inventory did not add inventories for any of the figures - the existing
inventories of the other figures in that set were done by five different people.
There has been some discussion behind the scenes about requiring that minifigure
inventories be completed before the set inventory is approved. However, this
is not currently a requirement.
The best I can tell you is that I will try to look at uninventoried 2018 minifigures
when I get some spare time and see what I can do about adding their inventories.
|
Hi,
Is there any chance that this set wil be updated?
|
|
|
| Author: | Admin_Russell | | Posted: | Aug 28, 2018 12:25 | | Subject: | Re: Request update inventory on set 70567 | | Viewed: | 24 times | | Topic: | Inventories | |
|
|
BrickLink
ID CardAdmin_Russell
|
Location:  USA, California |
| Member Since |
Contact |
Type |
Status |
| May 9, 2017 |
 |
Admin |
|
|
| BrickLink Administrator |
|
| In Inventories, Henk61 writes:
| | In Inventories, StormChaser writes:
| | In Catalog Inventories, Henk61 writes:
| | Hi,
Is it possible that the inventory of the set 70567 can be completed?
On 5 minifigs I am unable to see the parts because the "item consists of" is
not available.
|
I don't have this set, so I am unable to complete the inventory. The submitter
of the set inventory did not add inventories for any of the figures - the existing
inventories of the other figures in that set were done by five different people.
There has been some discussion behind the scenes about requiring that minifigure
inventories be completed before the set inventory is approved. However, this
is not currently a requirement.
The best I can tell you is that I will try to look at uninventoried 2018 minifigures
when I get some spare time and see what I can do about adding their inventories.
|
Hi,
Is there any chance that this set wil be updated?
|
You must mean the new Ninjago City Docks set:
|
|
| Author: | Henk61 | | Posted: | Aug 28, 2018 10:12 | | Subject: | Re: Request update inventory on set 70567 | | Viewed: | 31 times | | Topic: | Inventories | |
|
| In Inventories, StormChaser writes:
| | In Catalog Inventories, Henk61 writes:
| | Hi,
Is it possible that the inventory of the set 70567 can be completed?
On 5 minifigs I am unable to see the parts because the "item consists of" is
not available.
|
I don't have this set, so I am unable to complete the inventory. The submitter
of the set inventory did not add inventories for any of the figures - the existing
inventories of the other figures in that set were done by five different people.
There has been some discussion behind the scenes about requiring that minifigure
inventories be completed before the set inventory is approved. However, this
is not currently a requirement.
The best I can tell you is that I will try to look at uninventoried 2018 minifigures
when I get some spare time and see what I can do about adding their inventories.
|
Hi,
Is there any chance that this set wil be updated?
|
|
| Author: | nectara | | Posted: | Aug 25, 2018 03:50 | | Subject: | Re: 75203-1 | | Viewed: | 35 times | | Topic: | Inventories | |
|
| In Inventories, Hygrotus writes:
| | In Catalog Inventories, nectara writes:
| | Hi
What's going on with 75203?
More than one month still ,,Inventory In Progress,,
Regards
Nectara
|
https://www.youtube.com/watch?v=vfc4eim6XCA
Not only this one from SW is still missing inventory, also 75220 and 75221.
BTW Sandcrawler was added on the beggining of July, so almost two months without
inventory now
If you want to do it I can release this set to you to inventory it?
|
Hi
I have no idea how to do it
Regards
Nectara
|
|
| Author: | Hygrotus | | Posted: | Aug 24, 2018 18:03 | | Subject: | Re: 75203-1 | | Viewed: | 31 times | | Topic: | Inventories | |
|
| In Catalog Inventories, nectara writes:
| | Hi
What's going on with 75203?
More than one month still ,,Inventory In Progress,,
Regards
Nectara
|
https://www.youtube.com/watch?v=vfc4eim6XCA
Not only this one from SW is still missing inventory, also 75220 and 75221.
BTW Sandcrawler was added on the beggining of July, so almost two months without
inventory now
If you want to do it I can release this set to you to inventory it?
|
| Author: | nectara | | Posted: | Aug 24, 2018 07:36 | | Subject: | 75203-1 | | Viewed: | 75 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi
What's going on with 75203?
More than one month still ,,Inventory In Progress,,
Regards
Nectara
|
|
| Author: | randyf | | Posted: | Aug 21, 2018 23:36 | | Subject: | Re: Supplying a set's inventory | | Viewed: | 25 times | | Topic: | Inventories | |
|
| In Catalog Inventories, Admin_Russell writes:
| | In Catalog Inventories, Classicsmiley writes:
| | | | First thing: that 7-digit number is called a Part Color Code or PCC. These are
unique codes assigned by TLG which identify a particular part in a specific color.
|
For quite some time I've wondered why the term "PCC" is used on Bricklink,
instead of the LEGO-Company term "element id."
Does anyone know?
|
PCC describes the code better. The first PCC's were literally a combination
of a 4-digit part code and a 2-digit color code. Some of those original PCC's
are still being used:
3024+02
3024+21
3024+23
3024+24
The new 7-digit codes aren't "smart" like that, but they do represent the
part in a specific color, as opposed to the 5-digit mold number. PCC is easier
to read and type, too.
|
Also, maybe nobody knew they were called Element IDs by LEGO back in those days.
In that case, BrickLink had to come up with something to call them.
Randy
|
|
| Author: | CCBricks | | Posted: | Aug 21, 2018 21:44 | | Subject: | Parts for Gear #853191 | | Viewed: | 56 times | | Topic: | Inventories | | Status: | Open | |
|
| Evening All...
I cam across a particular head piece that is associated with Jack Sparrow that
is only in this item:
It shows no inventories for the figures. Are the figures glued together, or
is it just the brick bases? I might have the other parts for this particular
version of Sparrow, but I'd have to check my "odd ball" bin lol.
Brian
|
|
| Author: | SylvainLS | | Posted: | Aug 21, 2018 18:54 | | Subject: | Re: Supplying a set's inventory | | Viewed: | 26 times | | Topic: | Inventories | |
|
| In Catalog Inventories, Admin_Russell writes:
| | […]
| | I think the question was “Why ‘PCC’ and not ‘Element ID,’ TLG’s term?”
As TLG calls PCCs “Element ID”s, the mould number being a “Design ID.”
|
PCC is more descriptive of the code than "Element ID".
|
Er, if you say so…
|
|
| Author: | WhiteVanMan | | Posted: | Aug 21, 2018 17:05 | | Subject: | Re: Supplying a set's inventory | | Viewed: | 20 times | | Topic: | Inventories | |
|
| In Catalog Inventories, Hygrotus writes:
| | In Catalog Inventories, WhiteVanMan writes:
| | In Catalog Inventories, Hygrotus writes:
| | In Catalog Inventories, WhiteVanMan writes:
| | In Catalog Inventories, Hygrotus writes:
| |
OK great
|
I've cancelled the original inventory as I couldn't add the newly added
parts from the catalogue, and the newer inventory is now submitted for approval.
The descriptions are adequate I think, but hopefully someone can submit split
images for the yellow 'face' elements, as this will be better than the
ones supplied by LEGO.COM
If this can be approved, it will be great as this means I'll be able to part
out the 2 sets that I have.
Thanks!
Paul
|
Ok thanks for message, will check it in just a moment
|
I've also added the correct colour image for the Dark Azure 2x3x2 curved
side brick, as it's a new colour for that part.
Cheers!
Paul
|
Perfect Checked and approved. Thank you very much for submiting this invenotry.
So maybe you submit more in the future
|
I have to say, thank you for approving this quickly as those 2 sets had been
bugging me for a while since I bought them to plunder the 2x4 Blue plates!
I think it's possible that I'll be doing more Duplo sets as I've
decided to get out of doing USED duplo as I have loads of vehicle elements that
I can't shift, and with all of the other parts that I have, they are just
taking up so much space that I could use for the normal LEGO elements.
Another reason why I'm getting out of the USED Duplo, is that there are more
and more Chinese Clones turning up at the car boot sales, so it will be really
hard to garner a decent return...
So, it depends upon whether I manage to see NEW Duplo at reduced prices or not.
Thanks, once again for the speedy approval of that set.
Regards,
Paul
|
|
| Author: | Admin_Russell | | Posted: | Aug 21, 2018 16:40 | | Subject: | Re: Supplying a set's inventory | | Viewed: | 32 times | | Topic: | Inventories | |
|
|
BrickLink
ID CardAdmin_Russell
|
| Location: USA, California |
| Member Since |
Contact |
Type |
Status |
| May 9, 2017 |
|
Admin |
|
|
| BrickLink Administrator |
|
| In Catalog Inventories, SylvainLS writes:
| | In Catalog Inventories, Admin_Russell writes:
| | In Catalog Inventories, Classicsmiley writes:
| | | | First thing: that 7-digit number is called a Part Color Code or PCC. These are
unique codes assigned by TLG which identify a particular part in a specific color.
|
For quite some time I've wondered why the term "PCC" is used on Bricklink,
instead of the LEGO-Company term "element id."
Does anyone know?
|
PCC describes the code better. The first PCC's were literally a combination
of a 4-digit part code and a 2-digit color code. Some of those original PCC's
are still being used:
3024+02
3024+21
3024+23
3024+24
The new 7-digit codes aren't "smart" like that, but they do represent the
part in a specific color, as opposed to the 5-digit mold number. PCC is easier
to read and type, too.
|
I think the question was “Why ‘PCC’ and not ‘Element ID,’ TLG’s term?”
As TLG calls PCCs “Element ID”s, the mould number being a “Design ID.”
|
PCC is more descriptive of the code than "Element ID".
|
|
| Author: | Hygrotus | | Posted: | Aug 21, 2018 16:38 | | Subject: | Re: Supplying a set's inventory | | Viewed: | 14 times | | Topic: | Inventories | |
|
| In Catalog Inventories, WhiteVanMan writes:
| | In Catalog Inventories, Hygrotus writes:
| | In Catalog Inventories, WhiteVanMan writes:
| | In Catalog Inventories, Hygrotus writes:
| |
OK great
|
I've cancelled the original inventory as I couldn't add the newly added
parts from the catalogue, and the newer inventory is now submitted for approval.
The descriptions are adequate I think, but hopefully someone can submit split
images for the yellow 'face' elements, as this will be better than the
ones supplied by LEGO.COM
If this can be approved, it will be great as this means I'll be able to part
out the 2 sets that I have.
Thanks!
Paul
|
Ok thanks for message, will check it in just a moment
|
I've also added the correct colour image for the Dark Azure 2x3x2 curved
side brick, as it's a new colour for that part.
Cheers!
Paul
|
Perfect Checked and approved. Thank you very much for submiting this invenotry.
So maybe you submit more in the future
|
|
| Author: | WhiteVanMan | | Posted: | Aug 21, 2018 16:27 | | Subject: | Re: Supplying a set's inventory | | Viewed: | 20 times | | Topic: | Inventories | |
|
| In Catalog Inventories, Hygrotus writes:
| | In Catalog Inventories, WhiteVanMan writes:
| | In Catalog Inventories, Hygrotus writes:
| |
OK great
|
I've cancelled the original inventory as I couldn't add the newly added
parts from the catalogue, and the newer inventory is now submitted for approval.
The descriptions are adequate I think, but hopefully someone can submit split
images for the yellow 'face' elements, as this will be better than the
ones supplied by LEGO.COM
If this can be approved, it will be great as this means I'll be able to part
out the 2 sets that I have.
Thanks!
Paul
|
Ok thanks for message, will check it in just a moment
|
I've also added the correct colour image for the Dark Azure 2x3x2 curved
side brick, as it's a new colour for that part.
Cheers!
Paul
|
|
| Author: | Hygrotus | | Posted: | Aug 21, 2018 16:20 | | Subject: | Re: Supplying a set's inventory | | Viewed: | 16 times | | Topic: | Inventories | |
|
| In Catalog Inventories, WhiteVanMan writes:
| | In Catalog Inventories, Hygrotus writes:
| |
OK great
|
I've cancelled the original inventory as I couldn't add the newly added
parts from the catalogue, and the newer inventory is now submitted for approval.
The descriptions are adequate I think, but hopefully someone can submit split
images for the yellow 'face' elements, as this will be better than the
ones supplied by LEGO.COM
If this can be approved, it will be great as this means I'll be able to part
out the 2 sets that I have.
Thanks!
Paul
|
Ok thanks for message, will check it in just a moment
|
|
| Author: | WhiteVanMan | | Posted: | Aug 21, 2018 16:19 | | Subject: | Re: Supplying a set's inventory | | Viewed: | 13 times | | Topic: | Inventories | |
|
| In Catalog Inventories, Hygrotus writes:
| |
OK great
|
I've cancelled the original inventory as I couldn't add the newly added
parts from the catalogue, and the newer inventory is now submitted for approval.
The descriptions are adequate I think, but hopefully someone can submit split
images for the yellow 'face' elements, as this will be better than the
ones supplied by LEGO.COM
If this can be approved, it will be great as this means I'll be able to part
out the 2 sets that I have.
Thanks!
Paul
|
|
| Author: | SylvainLS | | Posted: | Aug 21, 2018 15:57 | | Subject: | Re: Supplying a set's inventory | | Viewed: | 28 times | | Topic: | Inventories | |
|
| In Catalog Inventories, Admin_Russell writes:
| | In Catalog Inventories, Classicsmiley writes:
| | | | First thing: that 7-digit number is called a Part Color Code or PCC. These are
unique codes assigned by TLG which identify a particular part in a specific color.
|
For quite some time I've wondered why the term "PCC" is used on Bricklink,
instead of the LEGO-Company term "element id."
Does anyone know?
|
PCC describes the code better. The first PCC's were literally a combination
of a 4-digit part code and a 2-digit color code. Some of those original PCC's
are still being used:
3024+02
3024+21
3024+23
3024+24
The new 7-digit codes aren't "smart" like that, but they do represent the
part in a specific color, as opposed to the 5-digit mold number. PCC is easier
to read and type, too.
|
I think the question was “Why ‘PCC’ and not ‘Element ID,’ TLG’s term?”
As TLG calls PCCs “Element ID”s, the mould number being a “Design ID.”
|
|
|
| Author: | Classicsmiley | | Posted: | Aug 21, 2018 15:04 | | Subject: | Re: Supplying a set's inventory | | Viewed: | 25 times | | Topic: | Inventories | |
|
| | | First thing: that 7-digit number is called a Part Color Code or PCC. These are
unique codes assigned by TLG which identify a particular part in a specific color.
|
For quite some time I've wondered why the term "PCC" is used on Bricklink,
instead of the LEGO-Company term "element id."
Does anyone know?
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
Poland, w. Wielkopolskie
Thailand, Chiang Mai
Belgium, Flemish Brabant
)
)
Germany, Schleswig-Holstein
Canada, Ontario
Luxembourg
United Kingdom, Scotland
France, Nouvelle-Aquitaine
Netherlands, Overijssel
Austria, Burgenland
United Kingdom, England
South Africa, Western Cape
