BrickLink Discussion Forum

Discussion Forum

Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies

Inventory Change Request for Set 7710-1 - SezaR (1380)

Please make changes to the following inventory: (Set 7710-1) * Delete 3 Part 4073 Trans-Yellow Plate, Round 1 x 1 * Add 2 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue [...]
(37 months ago, Apr 8, 2021, to Inventories Requests)

Inventory Change Request for Set 7710-1 - SezaR (1380)

Please make changes to the following inventory: (Set 7710-1) * Change 1 Part Black BA264pb01 Stickered Assembly 8 x 6 x 3 1/3 with White Control Panel with Gauges and Buttons [...]
(37 months ago, Apr 8, 2021, to Inventories Requests)

Inventory Change Request for Set 6775-1 - randyf (442)

Please make changes to the following inventory: (Set 6775-1) * Change 1 Part Yellow {32064 Technic, Brick 1 x 2 with Axle Hole to 32064c Technic, Brick 1 x 2 with Axle Hole (+ [...]
(37 months ago, Apr 8, 2021, to Inventories Requests)

Re: Birch Books - SeBj (56)

[...] Seems about right. Thanx alot!
(37 months ago, Apr 8, 2021, to Colors)

Re: Birch Books - hpoort (410)

[...] (Part 87079pb672) is used next to (Part 3070b,65) on the cover image of (Set 10270-1) and they look pretty similar. I therefore assume the printing is close to Metallic [...]
(37 months ago, Apr 8, 2021, to Colors)

Re: Inventory Change Request for Set 7147-1 - randyf (442)

[...] We will need proof from the contents of a sealed set or from a set that was new at one point and never mixed with the parts from other sets. Cheers, Randy
(37 months ago, Apr 8, 2021, to Inventories Requests)

Inventory Change Request for Set 7162-1 - DanielBuyBricks (331)

Please make changes to the following inventory: (Set 7162-1) * Add 2 Part 89651 Dark Bluish Gray Technic, Connector Axle and Pin 2 x 7 with Two Ball Joint Sockets, Squared Ends, [...]
(37 months ago, Apr 8, 2021, to Inventories Requests)

Inventory Change Request for Set 7157-1 - DanielBuyBricks (331)

Please make changes to the following inventory: (Set 7157-1) * Add 2 Part 89651 Black Technic, Connector Axle and Pin 2 x 7 with Two Ball Joint Sockets, Squared Ends, Open Side [...]
(37 months ago, Apr 8, 2021, to Inventories Requests)

Inventory Change Request for Set 7147-1 - DanielBuyBricks (331)

Please make changes to the following inventory: (Set 7147-1) * Add 2 Part 89651 Black Technic, Connector Axle and Pin 2 x 7 with Two Ball Joint Sockets, Squared Ends, Open Side [...]
(37 months ago, Apr 8, 2021, to Inventories Requests)

Birch Books - SeBj (56)

Hi everyone, Does anyone know the name of the gold text color in the ”Birch Books”-sign tiles? If I want to build something next to them that matched the colors as well as possible. [...]
(37 months ago, Apr 8, 2021, to Colors)

Inventory Change Request for Set 8114-1 - randyf (442)

Please make changes to the following inventory: (Set 8114-1) * Change 2 Part Dark Bluish Gray {32064 Technic, Brick 1 x 2 with Axle Hole to 32064c Technic, Brick 1 x 2 with Axle [...]
(37 months ago, Apr 8, 2021, to Inventories Requests)

Inventory Change Request for Set 6905-1 - randyf (442)

Please make changes to the following inventory: (Set 6905-1) * Change 2 Part Black {6048 Arm Piece with Pin, 2 Fingers to 6048b Arm Piece with Pin, 2 Fingers and Finger Grooves} [...]
(37 months ago, Apr 7, 2021, to Inventories Requests)

Inventory Change Request for Set 70003-1 - randyf (442)

Please make changes to the following inventory: (Set 70003-1) * Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301b [...]
(37 months ago, Apr 7, 2021, to Inventories Requests)

Inventory Change Request for Set 2536-1 - randyf (442)

Please make changes to the following inventory: (Set 2536-1) * Change 1 Part White {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to [...]
(37 months ago, Apr 7, 2021, to Inventories Requests)

Re: how to add parts from rebrickable - randyf (442)

Someone has already reserved the inventory, so it should be in the process of being added very shortly. Please have patience. In Catalog, legomaster100 writes: [...]
(37 months ago, Apr 7, 2021, to Catalog)

Re: Inventory Change Request for Set 21134-1 - randyf (442)

[...] Those would be found in the following figure in the set inventory: (Minifigure min049)
(37 months ago, Apr 7, 2021, to Inventories Requests)

how to add parts from rebrickable - legomaster100 (159)

For set 21326 winnie the pooh, parts list is available in rebrickable and not bricklink. Can I add it to bricklink somehow?? Thanks -Brick Llama
(37 months ago, Apr 7, 2021, to Catalog)

Re: Set 21326 - popsicle (6656)

[...] The set's inventory was recently set to Inventory In Progress: (URL) Patient, Maheedhar. Maybe work on adding other inventory? Or spend the wait time learning to [...]
(37 months ago, Apr 7, 2021, to Inventories)

Inventory Change Request for Set 21134-1 - fplpfan (50)

Please make changes to the following inventory: (Set 21134-1) * Add 4 Part 4070 Reddish Brown Brick, Modified 1 x 1 with Headlight Comments from Submitter: This set has 4 reddish [...]
(37 months ago, Apr 7, 2021, to Inventories Requests)

Re: New Packing Dimensions Feature - cosmicray (3489)

[...] Let's just say that I wanted one, I ended up with two, and I had to bid on a lot of twenty-five to get the two. The others all found homes with local individuals, [...]
(37 months ago, Apr 7, 2021, to Catalog)

Set 21326 - legomaster100 (159)

Is anyone going to add the inventories - I want to part out the set I have no idea how to -M
(37 months ago, Apr 7, 2021, to Inventories)

Inventory Change Request for Set 7315-1 - randyf (442)

Please make changes to the following inventory: (Set 7315-1) * Change 6 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) [...]
(37 months ago, Apr 7, 2021, to Inventories Requests)

Re: Inventory Change Request for Set 10274-1 - normann1974 (2291)

[...] That looks like the old pin hole (new one is smaller). Will you fix the request or do I need to redo it? /Jan
(37 months ago, Apr 7, 2021, to Inventories Requests)

Re: New Packing Dimensions Feature - jennnifer (3532)

[...] [...] Those are awesome! I am very jealous. :) Jen
(37 months ago, Apr 7, 2021, to Catalog)

Re: Inventory Change Request for Set 10274-1 - randyf (442)

[...] Yes, 44865 is a very new mold, so I would expect to see it only sets produced in very late 2020 into 2021.
(37 months ago, Apr 7, 2021, to Inventories Requests)

Inventory Change Request for Set 7310-1 - randyf (442)

Please make changes to the following inventory: (Set 7310-1) * Change 3 Part White {32064 Technic, Brick 1 x 2 with Axle Hole to 32064c Technic, Brick 1 x 2 with Axle Hole (+ [...]
(37 months ago, Apr 7, 2021, to Inventories Requests)

Re: Inventory Change Request for Set 10274-1 - Turez (43)

[...] The old mold is visible here, isn't it? (URL)
(37 months ago, Apr 7, 2021, to Inventories Requests)

Inventory Change Request for Set 9498-1 - randyf (442)

Please make changes to the following inventory: (Set 9498-1) * Add 8 Part 44567a Light Bluish Gray Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove (match [...]
(37 months ago, Apr 7, 2021, to Inventories Requests)

Re: Chrome Silver Legs - confirmation - popsicle (6656)

[...] Thought so. I understand too.
(37 months ago, Apr 7, 2021, to Catalog)

Re: Chrome Silver Legs - confirmation - tpr (8638)

[...] Just confirming if the ones i have are genuine - they have Lego logo - but you never know tpr
(37 months ago, Apr 7, 2021, to Catalog)

Re: Chrome Silver Legs - confirmation - popsicle (6656)

[...] Having parted quite a few of both over the years... (Minifigure sw0385) (Minifigure sw0097) I’ve seen white and light bluish gray ABS used in both torso and leg assemblies. [...]
(37 months ago, Apr 7, 2021, to Catalog)

Inventory Change Request for Set 10274-1 - normann1974 (2291)

Please make changes to the following inventory: (Set 10274-1) * Change 1 Part Dark Bluish Gray {2458 Brick, Modified 1 x 2 with Pin to 44865 Brick, Modified 1 x 2 with Pin and [...]
(37 months ago, Apr 7, 2021, to Inventories Requests)

Re: New Packing Dimensions Feature - Admin_Russell

[...] I tested with with another account. Feel free to open another account if you want to test for Instant Checkout.
(37 months ago, Apr 7, 2021, to Catalog)

Re: New Packing Dimensions Feature - Brick.Door (7505)

[...] When I put items in my cart and then go to checkout to test it I get the message "Unable to buy from yourself BrickLink does not allow sellers to buy from themselves." [...]
(37 months ago, Apr 7, 2021, to Catalog)

Re: Chrome Silver Legs - confirmation - Turez (43)

[...] The hips and legs in my set (Gear 852737) are white like on this small image: (URL)
(37 months ago, Apr 7, 2021, to Catalog)

Re: Chrome Silver Legs - confirmation - starbeanie (10819)

(Minifigure sw0097) (Minifigure sw0385) were released 3 years apart. Maybe that's it? In Catalog Identification, tpr writes: [...]
(37 months ago, Apr 7, 2021, to Catalog)

Re: Chrome Silver Legs - confirmation - tpr (8638)

Hi Mine has Light Bluish Gray protrusions at the top ! tpr In Catalog Identification, starbeanie writes: [...]
(37 months ago, Apr 7, 2021, to Catalog)

Re: Chrome Silver Legs - confirmation - starbeanie (10819)

i've seen both tan and milky white In Catalog Identification, tpr writes: [...]
(37 months ago, Apr 7, 2021, to Catalog)

Re: Rare Very Light Blue Gray in Set 10698-1 - tec (61)

To my eye it's COOL SILVER (id 296), but better, left out that _pearl effect_ with which it was made years ago. At that time, a Cool Silver part was right in the [...]
(37 months ago, Apr 7, 2021, to Colors)

Chrome Silver Legs - confirmation - tpr (8638)

Hi (Part 970c00) Can anyone confirm the base colour of the Hips and Legs that are Chrome Silver Thanks tpr
(37 months ago, Apr 7, 2021, to Catalog)

Re: New Packing Dimensions Feature - cosmicray (3489)

[...] One of the presumptions inherent in the current volume-based calculation method is that items are rectangular. Bricks are, generally speaking, rectangular, but many LEGO [...]
(37 months ago, Apr 7, 2021, to Catalog)

Re: Rare Very Light Blue Gray in Set 10698-1 - paulvdb (7140)

[...] See this discussion from a couple of days ago about the same color issue: (URL)
(37 months ago, Apr 7, 2021, to Colors)

Re: Rare Very Light Blue Gray in Set 10698-1 - tons_of_bricks (12735)

[...] It's just a slight color variation within light gray. Very light bluish gray is almost white; from the picture those do not look to be that color at all.
(37 months ago, Apr 7, 2021, to Colors)

Re: Rare Very Light Blue Gray in Set 10698-1 - tonnic (4348)

[...] You should compare this brick with a very light bluish gray part like one of the Knights Kingdom shields. This part isn’t meant to be very light bluish gray, it might [...]
(37 months ago, Apr 7, 2021, to Colors)

Re: New Packing Dimensions Feature - Admin_Russell

[...] You can test it by putting things in a cart and trying to go through checkout. I personally tested it quite a bit when Instant Checkout was released, and it works very [...]
(37 months ago, Apr 7, 2021, to Catalog)

Rare Very Light Blue Gray in Set 10698-1 - 7StarMantis (33)

I found that the four 3005 light gray blocks in set 10698-1 that I got are unusually light when compared to other blocks of supposedly the same color. The manual lists these [...]
(37 months ago, Apr 7, 2021, to Colors)

Re: New Packing Dimensions Feature - Cob (3563)

[...] I'm jealous, that is an awesome scale.
(37 months ago, Apr 7, 2021, to Catalog)

Re: New Packing Dimensions Feature - Brick.Door (7505)

[...] Thanks for the quick reply! How do dimension limits work on instant checkout? I haven't been able to find any documentation. There is no way for me to test it, so [...]
(37 months ago, Apr 7, 2021, to Catalog)

Inventory Change Request for Set 6837-1 - randyf (442)

Please make changes to the following inventory: (Set 6837-1) * Change 1 Part Black {6048 Arm Piece with Pin, 2 Fingers to 6048b Arm Piece with Pin, 2 Fingers and Finger Grooves} [...]
(37 months ago, Apr 7, 2021, to Inventories Requests)

Re: Inventory Change Request for Minifig sw0100 - axaday (7301)

[...] This minifig lives on my desk. Is a new picture of him wanted?
(37 months ago, Apr 7, 2021, to Inventories Requests)

Re: New Packing Dimensions Feature - Admin_Russell

[...] Many of the currently entered Packing Dimensions were mass imported from LDraw data when Instant Checkout was implemented in 2017. These measurements have no user credit [...]
(37 months ago, Apr 7, 2021, to Catalog)

Re: Inventory Change Request for Minifig sw0100 - randyf (442)

[...] [...] There are many official set images and box images that show things that were never included in the sets, but our guideline is to *not* alter official set images [...]
(37 months ago, Apr 7, 2021, to Inventories Requests)

Re: New Packing Dimensions Feature - Brick.Door (7505)

For parts is the z dimension the height? Because I looked at 1x1x5 brick and the height is .8 cm. The actual height was entered as the y dimension. Or is the z dimension the [...]
(37 months ago, Apr 7, 2021, to Catalog)

Re: New Packing Dimensions Feature - brickerking (1861)

[...] Yay, this makes sense! You can always perform a calculation on the server side to display stud dimensions. Entering a real unit of measurement on the user/data entry [...]
(37 months ago, Apr 7, 2021, to Catalog)

Re: New Packing Dimensions Feature - tec (61)

Good to know
(37 months ago, Apr 7, 2021, to Catalog)

Re: New Packing Dimensions Feature - Admin_Russell

[...] There is no relationship or dependency between the two types of dimensions - stud and metric. I know in the past that stud dimensions were used to give an estimate of [...]
(37 months ago, Apr 7, 2021, to Catalog)

Re: New Packing Dimensions Feature - Admin_Russell

[...] They were rejected because we do not accept stud dimensions on non-standard parts. Especially now that we have actual metric values being added, there is no need to find [...]
(37 months ago, Apr 7, 2021, to Catalog)

Re: New Packing Dimensions Feature - cosmicray (3489)

[...] Believe it or not, the correct answer to this question also involves orientation within the envelope when shipped. If you put solid bricks (or any part) in the [...]
(37 months ago, Apr 7, 2021, to Catalog)

Re: New Packing Dimensions Feature - cosmicray (3489)

[...] I'll see you ancient balance scale, and raise you a couple of USPS built to last 100 years heavy duty scales. Both are in daily use in the Cosmic Toys shipping department [...]
(37 months ago, Apr 7, 2021, to Catalog)

Re: New Packing Dimensions Feature - tec (61)

Update: Many of my measurements got rejected Is it because of fractions? (0.5 0.66 ..) My example was: (Part 44567b) where W=1.67
(37 months ago, Apr 7, 2021, to Catalog)

Re: New Packing Dimensions Feature - cosmicray (3489)

[...] An observation, and not a criticism, the Z dimension (on the brick and the slope) correctly includes the height of the stud on top, and because of that is not [...]
(37 months ago, Apr 7, 2021, to Catalog)

Inventory Change Request for Set 9217-1 - msSquirrel (444)

Please make changes to the following inventory: (Set 9217-1) * Add 9 Part 76371 Red Duplo, Brick 1 x 2 x 2 with Bottom Tube (Alternate) Comments from Submitter: sealed [...]
(37 months ago, Apr 7, 2021, to Inventories Requests)

Inventory Change Request for Set 9794-3 - axaday (7301)

Please make changes to the following inventory: (Set 9794-3) * Change 2 Part Black {6048 Arm Piece with Pin, 2 Fingers to 6048b Arm Piece with Pin, 2 Fingers and Finger Grooves} [...]
(37 months ago, Apr 7, 2021, to Inventories Requests)

Re: Inventory Change Request for Set 9794-3 - axaday (7301)

[...] Then you went 2/2.
(37 months ago, Apr 7, 2021, to Inventories Requests)

Re: Inventory Change Request for Set 9794-3 - Turez (43)

[...] Yes.
(37 months ago, Apr 7, 2021, to Inventories Requests)

Re: Inventory Change Request for Minifig sw0100 - dcarmine (7169)

[...] Yes I do. [...] I just checked my fig and you are right, it's Dark Nougat. Then why is the figure pic in DK OG? The set pic and box image also have it as DK OG? [...]
(37 months ago, Apr 7, 2021, to Inventories Requests)

Re: New Packing Dimensions Feature - Admin_Russell

[...] They are actually still stored in the system as mm, but we didn't want the catalog upload forms to use two different measurement standards. All of the dimensions [...]
(37 months ago, Apr 7, 2021, to Catalog)

Inventory Change Request for Set 5972-1 - randyf (442)

Please make changes to the following inventory: (Set 5972-1) * Change 2 Part Black {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to [...]
(37 months ago, Apr 6, 2021, to Inventories Requests)

Inventory Change Request for Set 5971-1 - randyf (442)

Please make changes to the following inventory: (Set 5971-1) * Change 2 Part Yellow {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to [...]
(37 months ago, Apr 6, 2021, to Inventories Requests)

Inventory Change Request for Set 8091-1 - randyf (442)

Please make changes to the following inventory: (Set 8091-1) * Change 3 Part Dark Red {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a [...]
(37 months ago, Apr 6, 2021, to Inventories Requests)

Inventory Change Request for Set 7312-1 - randyf (442)

Please make changes to the following inventory: (Set 7312-1) * Change 3 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) [...]
(37 months ago, Apr 6, 2021, to Inventories Requests)

Re: Inventory Change Request for Set 3807-1 - randyf (442)

[...] There are a number of parts in the set that are not used in the main build but are included for "inspiration". This parts was one of those. Every Spybotics set came with [...]
(37 months ago, Apr 6, 2021, to Inventories Requests)

Re: New Packing Dimensions Feature - axaday (7301)

[...] That's what I've been doing the whole time with the packaging dimensions.
(37 months ago, Apr 6, 2021, to Catalog)

Re: Inventory Change Request for Set 3807-1 - samsam2 (2361)

Randy, since you have just reviewed 'extras' from this set, are both of these part of the build? (Part x165c05) I can only find one in the instructions. Could the quantity [...]
(37 months ago, Apr 6, 2021, to Inventories Requests)

Inventory Change Request for Set 6239-1 - randyf (442)

Please make changes to the following inventory: (Set 6239-1) * Change 1 Part Red {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to 4623a [...]
(37 months ago, Apr 6, 2021, to Inventories Requests)

Inventory Change Request for Set 6873-1 - randyf (442)

Please make changes to the following inventory: (Set 6873-1) * Change 2 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a [...]
(37 months ago, Apr 6, 2021, to Inventories Requests)

Re: New Packing Dimensions Feature - Admin_Russell

[...] Actually, cm is the original standard of the site. Is there any particular reason you prefer mm?
(37 months ago, Apr 6, 2021, to Catalog)

Re: New Packing Dimensions Feature - axaday (7301)

Can we turn it back to mm like it has always been? In Catalog, BasKrie writes: [...]
(37 months ago, Apr 6, 2021, to Catalog)

Re: Inventory Change Request for Set 9794-3 - axaday (7301)

[...] My picture came out terribly but it is good enough. Are the "grooves" the indentation in my white circle in the pic? [...] I think it is actually 4085c when I compare [...]
(37 months ago, Apr 6, 2021, to Inventories Requests)

Re: Make a search with a list of bricks possible. - gptrevi (11)

[...] Thank you very much everyone who promptly replied. Obviously I did not understand how the wish list works, but now I will study its functions...
(37 months ago, Apr 6, 2021, to Suggestions)

Re: Sets missing on Bricklink - Bricks2Love (3259)

[...] Hi, would you share pictures of the set 9781-1 with me? ill try to complet this rare set. Kind regards Guido Guido@briks2love.com
(37 months ago, Apr 6, 2021, to Catalog)

Re: Inventory Change Request for Set 7862-1 - SezaR (1380)

[...] This set was released in 1981 and since 1981, the connectors began to have middle pin 766c01. I have got photos of a new copy and multiple used-in-mint-condition copies [...]
(37 months ago, Apr 6, 2021, to Inventories Requests)

Inventory Change Request for Set 7862-1 - SezaR (1380)

Please make changes to the following inventory: (Set 7862-1) * Delete 1 Part x466 Light Gray Electric, Wire & Connector 12V / 4.5V with two Leads, unspecified length * Delete [...]
(37 months ago, Apr 6, 2021, to Inventories Requests)

Inventory Change Request for Set 3807-1 - randyf (442)

Please make changes to the following inventory: (Set 3807-1) * Add 1 Part 3713 Black Technic Bush (Extra) * Add 1 Part 32062 Black Technic, Axle 2 Notched (Extra) [...]
(37 months ago, Apr 6, 2021, to Inventories Requests)

Re: New Packing Dimensions Feature - Admin_Russell

[...] It's going to take some getting used to. I just fixed that one.
(37 months ago, Apr 6, 2021, to Catalog)

Re: First Lego League set 9781 - Bricks2Love (3259)

[...] THAT SOUNDS GREAT! YOU CAB USE MY PICTURE AND CORRECT THE NUMBER
(37 months ago, Apr 6, 2021, to Inventories)

Re: Sticker part 2335pb164 sticker orientation - razorflan (752)

[...] Hmmm... think I will sell my flags with stickers on sheet & let the buyer decide I'm not sure which way I prefer now
(37 months ago, Apr 6, 2021, to Catalog)

Re: Sticker part 2335pb164 sticker orientation - BricksThatStick (6356)

[...] It's applied correctly in the catalog - we use instructions as reference for sticker application not set images. Paul.
(37 months ago, Apr 6, 2021, to Catalog)

Sticker part 2335pb164 sticker orientation - razorflan (752)

Set 70906 part 2335pb164 the sticker in the image for this part is applied incorectly. Just check the image for set 70906 clips are at the top 'bang' 😲
(37 months ago, Apr 6, 2021, to Catalog)

Re: Inventory Change Request for Set 3807-1 - axaday (7301)

[...] I got the total amount expected of each of those. So 1 extra of each.
(37 months ago, Apr 6, 2021, to Inventories Requests)

Inventory Change Request for Set 75038-1 - randyf (442)

Please make changes to the following inventory: (Set 75038-1) * Add 6 Part 44567a Light Bluish Gray Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove (match [...]
(37 months ago, Apr 6, 2021, to Inventories Requests)

Re: New Packing Dimensions Feature - Emporiosa (5527)

[...] Sorry that's my mistake in how I described it because I said any dimension (and that's not accurate). I think it's oversized only on the triple dimensions [...]
(37 months ago, Apr 6, 2021, to Catalog)

Re: New Packing Dimensions Feature - Brick.Door (7505)

[...] So you have to exclude a part with any dimension over 20mm? That doesn't seem like it would work very well. A 1x6x5 brick can easily fit but only one of its dimensions [...]
(37 months ago, Apr 6, 2021, to Catalog)

Re: New Packing Dimensions Feature - Emporiosa (5527)

[...] I love seeing these kinds of new features for sellers being implemented! Thank-you so much! :) A feature to add later which would be fantastic (which another [...]
(37 months ago, Apr 6, 2021, to Catalog)

Inventory Change Request for Set 10271-1 - Turez (43)

Please make changes to the following inventory: (Set 10271-1) * Change 1 Part {Dark Tan to Medium Nougat} 87079pb904 Tile 2 x 4 with French and Danish Emblem, Black 'DANMARK', [...]
(37 months ago, Apr 6, 2021, to Inventories Requests)

Re: New Packing Dimensions Feature - Emporiosa (5527)

[...] It's already very much in use with Canadians sellers; it can jump from a $1.94 stamp to $22 if the part is over 20mm in thickness. Canadian sellers have been manually [...]
(37 months ago, Apr 6, 2021, to Catalog)

Re: Make a search with a list of bricks possible. - Brickwilbo (1534)

[...] Already exists. See here: (URL)
(37 months ago, Apr 6, 2021, to Suggestions)

Re: Make a search with a list of bricks possible. - Tracyd (418)

[...] You mean something like a Wanted List that already exists?
(37 months ago, Apr 6, 2021, to Suggestions)

Re: Make a search with a list of bricks possible. - jennnifer (3532)

[...] You are looking for a Wanted List. It's already here on BrickLink. Start with the little heart 'Want' on the top menu. Or, type in your code in the search, [...]
(37 months ago, Apr 6, 2021, to Suggestions)

Re: New Packing Dimensions Feature - jennnifer (3532)

[...] Nope, I'm old-school analog all the way! Here's my scale....lol. Jen
(37 months ago, Apr 6, 2021, to Catalog)

Next Page: 5 More | 10 More | 25 More | 50 More | 100 More