Discussion Forum: Catalog Requests(Post New Message)
Redisplay Messages: Compact | Brief | All | Full      Show Messages: All | Without Replies

View Thread Part 73562 in Dark Pink - mooselover (1062)
My set 41686-1 came with a part 73562 instead of the listed 41477 (same part, different mold) in Dark Pink. I can't find any listing where part 73562 comes in Dark [...]
(29 months ago, Jan 16, 2022, to Catalog Requests)
View Thread Re: Brick 1 x 6 "frosted" (and possibly others) - randyf (442)
[...] I can definitely see the frosting in the image. [...] I would need to see the inside of solid color versions of 3002 from that time period before considering the [...]
(29 months ago, Jan 15, 2022, to Catalog Requests)
View Thread Re: Brick 1 x 6 "frosted" (and possibly others) - normann1974 (2291)
[...] If no one has a better image of (Part 3002f1) (I don't see any "frosting" on the current image), I believe this may also just be the same as (Part 3002) with [...]
(29 months ago, Jan 15, 2022, to Catalog Requests)
View Thread Re: Split entry for part 53588pb01 - BricksThatStick (6367)
[...] Here is the earlier thread for reference: (URL) Thanks Paul.
(29 months ago, Jan 15, 2022, to Catalog Requests)
View Thread Re: Split entry for part 53588pb01 - thepretzelman (28)
[...] Upon further inspection, I have found red marbling on mine which I previously assumed to be from the latter set. It is very minimal and hard to notice if not in direct [...]
(29 months ago, Jan 14, 2022, to Catalog Requests)
View Thread Re: Split entry for part 53588pb01 - Brickitty (6460)
[...] There was a thread on this a couple of years back. Bricklink used to distinguish between the 4 items in Bionicle sets as being marbled and the one from 7739 as being [...]
(29 months ago, Jan 14, 2022, to Catalog Requests)
View Thread Split entry for part 53588pb01 - thepretzelman (28)
Part number 53588pb01 is a raised baseplate piece in the color dark bluish gray with red marbling. The entry lists this part being contained in 5 sets. Four of which were released [...]
(29 months ago, Jan 14, 2022, to Catalog Requests)
View Thread Re: New mold: alternate or new part? - randyf (442)
[...] You're very welcome. :)
(29 months ago, Jan 10, 2022, to Catalog Requests)
View Thread Re: New mold: alternate or new part? - jennnifer (3535)
Thanks for taking care of this! Jen
(29 months ago, Jan 10, 2022, to Catalog Requests)
View Thread Re: SET 40522-1 - jennnifer (3535)
[...] I am always happy to help answer questions about catalog contributions! If you would like to add this inventory to the BrickLink catalog, all the links you need are on [...]
(29 months ago, Jan 10, 2022, to Catalog Requests)
View Thread SET 40522-1 - jfksdca (111)
HI. I created an XML file for 40522-1 and would like to send it to the inventory manager or upload it myself. I would have a couple of questions before adding it myself. Thanks, [...]
(29 months ago, Jan 10, 2022, to Catalog Requests)
View Thread Re: 42098-1 (Instructions Entry) - randyf (442)
I have added them for you, but you can use the standard form in the future: (URL) Cheers, Randy In Catalog Requests, AlfredMangott writes: [...]
(29 months ago, Jan 9, 2022, to Catalog Requests)
View Thread 42098-1 (Instructions Entry) - AlfredMangott (401)
Please set packing dimensions 27 x 20 x 2 cm
(29 months ago, Jan 9, 2022, to Catalog Requests)
View Thread Re: 30531-1 (Instructions Entry) - Samst (649)
Thanks. I did it by using the standard form. But when I click on « Submit Request », it opens up to me a blank page and indicate that there is server issue. So, that's [...]
(29 months ago, Jan 8, 2022, to Catalog Requests)
View Thread Re: 30531-1 (Instructions Entry) - randyf (442)
I have added them for you, but you can use the standard form in the future: (URL) Cheers, Randy In Catalog Requests, Samst writes: [...]
(29 months ago, Jan 8, 2022, to Catalog Requests)
View Thread 30531-1 (Instructions Entry) - Samst (649)
I have Weight and dimensions for the instructions of the polybag 30531 (Ninjago - Sons of Garmadon) Weight : 3.6 grams Dimensions : x=5.3 ; y= 6.9 ; z=0.02 I am [...]
(29 months ago, Jan 8, 2022, to Catalog Requests)
View Thread Please Add Alternate Number - axaday (7303)
(Part 98726) Now molded 76782. I compared to the Superman hair and don't see any difference
(29 months ago, Jan 8, 2022, to Catalog Requests)
View Thread Re: New mold: alternate or new part? - WoutR (920)
[...] I agree with you. It is a variant. Please mention the year of first (known) use AND the different design numbers in the note for future reference.
(29 months ago, Jan 8, 2022, to Catalog Requests)
View Thread Re: New mold: alternate or new part? - WoutR (920)
[...] I agree with you. It is a variant. Please mention the year of first (known) use in the note for future reference.
(29 months ago, Jan 8, 2022, to Catalog Requests)
View Thread Please Add Alternate Part Number - axaday (7303)
(Part 48172) Now molded 48461. I can't see an important difference between them, which is lucky because according to Brickset we've had them mixed for several years [...]
(29 months ago, Jan 7, 2022, to Catalog Requests)
View Thread New mold: alternate or new part? - jennnifer (3535)
Hello, I found a new mold for part 60614 in set 10297. (URL) (URL) By the way, the stock images for 60614 has misleading details: the big rounded hinge pins. Does anyone actually [...]
(29 months ago, Jan 7, 2022, to Catalog Requests)
View Thread Re: Please Add Alternate Part Number - Stellar (3510)
[...] Thanks Jonas, its interesting how some connections are updated in some parts over a long long time.
(29 months ago, Jan 7, 2022, to Catalog Requests)
View Thread Re: Please Add Alternate Part Number - Turez (43)
[...] All 50747* have hinges with seven teeth.
(29 months ago, Jan 7, 2022, to Catalog Requests)
View Thread Re: Please Add Alternate Part Number - Stellar (3510)
[...] Maybe there is a hinge difference that was not split in those canopies? (Part 30365) (Part 54671) (Part 50747pb16) The rest of 50747* have difficult images to see the [...]
(29 months ago, Jan 7, 2022, to Catalog Requests)
View Thread Please Add Alternate Part Number - axaday (7303)
New Part 50809. I compared it to 50747pb16. Part number is stamped and if 50747 is stamped it isn't in the same place. A few other little things are different like that [...]
(29 months ago, Jan 7, 2022, to Catalog Requests)
View Thread Please Add Alternate Item Numbers - Turez (43)
Please add the following alternate item numbers: (Part 92842) The new number is 77099. (URL) (URL) No important difference, pip mark has a new position and the new variant is [...]
(29 months ago, Jan 7, 2022, to Catalog Requests)
View Thread Re: Minifig Series 22 isn't complete - randyf (442)
[...] These two minifigures were just submitted yesterday, so us admins had not seen them yet. I have gone ahead and approved them just now. Cheers, Randy
(29 months ago, Jan 7, 2022, to Catalog Requests)
View Thread Minifig Series 22 isn't complete - idotter (49)
There are two minifigs missing on (URL) how do complete them?
(29 months ago, Jan 7, 2022, to Catalog Requests)
View Thread Please add Alternate Item Number - Snots4Life (1067)
I have the bicycle helmet with hair part from the skate park set, but it has a new part number of 76417 molded in. So please add an alternate item number for this part. Original [...]
(29 months ago, Jan 6, 2022, to Catalog Requests)
View Thread Re: Please add catalog description to gear 500599 - yorbrick (1185)
[...] It is already clearly stated on the page - released 2019.
(29 months ago, Jan 5, 2022, to Catalog Requests)
View Thread Re: Please add catalog description to gear 500599 - randyf (442)
[...] The items are now named exactly as they are on the prints themselves. The year of release is superfluous information because the catalog entry already stores the year [...]
(29 months ago, Jan 5, 2022, to Catalog Requests)
View Thread Re: Add 37829pb07 as appearance in 122217-1 - Turez (43)
[...] The foil pack does not have an inventory yet. If you own the set, you can submit the inventory here: (URL)
(29 months ago, Jan 5, 2022, to Catalog Requests)
View Thread Add 37829pb07 as appearance in 122217-1 - saarlaenner (33)
This dinosaur Baby is Part of this foil pack.
(29 months ago, Jan 5, 2022, to Catalog Requests)
View Thread Re: Please add catalog description to gear 500599 - enig (6343)
[...] I see the name of the item has already been changed and the note added. Catmins - thanks for the quick turnaround! @yorbrick 1) You have misunderstood me. I don't [...]
(29 months ago, Jan 5, 2022, to Catalog Requests)
View Thread Re: what fits onto a 56145 - Stuart9 (1069)
It does show a list below image. In Catalog Requests, tec writes: [...]
(29 months ago, Jan 5, 2022, to Catalog Requests)
View Thread Re: Please add catalog description to gear 500599 - yorbrick (1185)
[...] It is in the gear / poster section, so should be fairly obvious you are getting a poster and not a real toy of an elephant from 1937. I'm fairly sure the naming of [...]
(29 months ago, Jan 5, 2022, to Catalog Requests)
View Thread Re: Please add catalog description to gear 5005997 - enig (6343)
[...] Oh. The correct gear ID is 5005997 ;) /facepalm (Gear 5005997)
(29 months ago, Jan 5, 2022, to Catalog Requests)
View Thread Please add catalog description to gear 500599 - enig (6343)
Please add extended description: ******************************* First Edition Print - Illustration in Water Color for LEGO® Wooden Toy Elephant, Circa 1937 Printed on premium [...]
(29 months ago, Jan 5, 2022, to Catalog Requests)
View Thread Re: 45517-1 Inventory - Classicsmiley (285)
[...]
(29 months ago, Jan 4, 2022, to Catalog Requests)
View Thread 45517-1 Inventory - pb_bricks (549)
I bought set 45517-1 (in its sealed box) and expected to have part 86444 inside, as this is what Bricklink states as the inventory of the set. Instead of part 86444, [...]
(29 months ago, Jan 4, 2022, to Catalog Requests)
View Thread Set 4820 PCCs and Trans Purple 6510 - here4bricks614 (187)
The instructions for set 4820 contain many PCCs that aren’t present on Bricklink, but also raise another question regarding the existence of part 6510 in Trans-Purple. Is there [...]
(29 months ago, Jan 3, 2022, to Catalog Requests)
View Thread Re: Please Add Alternate Number - axaday (7303)
[...] Sorry, I had a lot on my shoulders. I see it already done, but I am talking about the one piece bicycle wheel. (Part 92851c01) now molded 28578.
(29 months ago, Jan 2, 2022, to Catalog Requests)
View Thread Re: Please Add Alternate Number - randyf (442)
[...] Thanks, Paul. :)
(29 months ago, Jan 2, 2022, to Catalog Requests)
View Thread Re: Please Add Alternate Number - paulvdb (7148)
[...] 28578 is the design ID (URL)
(29 months ago, Jan 2, 2022, to Catalog Requests)
View Thread Re: Please Add Alternate Number - randyf (442)
[...] I can't find a 28578 or 28575 anywhere in the catalog. What is the old number and what is the new number?
(29 months ago, Jan 2, 2022, to Catalog Requests)
View Thread Please Add Alternate Number - axaday (7303)
I got a new bicycle wheel on the racing wheelchair and it IS a new color, but it is actually the wheel that I already had on a bike from an older set. #28578. 28575c01
(29 months ago, Jan 2, 2022, to Catalog Requests)
View Thread Additional note for 39787c01 - FreeStorm (366)
lease add additional note below for part (Part 39787c01) Additional note: This part requires 3 LR41 batteries. -Fred
(29 months ago, Dec 30, 2021, to Catalog Requests)
View Thread Additional note for 52189c02 - FreeStorm (366)
Please add additional note below for part (Part 52189c02) Additional note: This part requires 3 LR41 batteries. -Fred
(29 months ago, Dec 30, 2021, to Catalog Requests)
View Thread Please mark for deletion 2972 - SezaR (1396)
(Part 2972)
(29 months ago, Dec 29, 2021, to Catalog Requests)
View Thread Re: Please Merge These Clikits Pens - randyf (442)
[...] Done. (Gear 3602)
(29 months ago, Dec 28, 2021, to Catalog Requests)

Next Page: 5 More | 10 More | 25 More | 50 More | 100 More