Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | Turez  | | Posted: | May 16, 2021 09:30 | | Subject: | Re: Inventory Change Request for Set 75188-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, clien14 writes:
| | Please make changes to the following inventory:
* Delete 1 Minifigure sw1005 Resistance Bomber Pilot - Finch Dallow (Alternate) (match ID 99)
* Change 1 Minifigure sw0861 Resistance Bomber Pilot {match ID 99 to 0}
Comments from Submitter:
SW1005 should be removed and added to 75188-2 as it was a limited release with different box and instructions. Other early sets with different box and instruction releases have also gotten separate entries, such as 4502-1 blue box and 4502-2 original trilogy box
|
As long as there is no second entry for this set, these requests cannot be approved.
And from what I see it is unlikely there there will ever be a second entry.
See https://www.bricklink.com/message.asp?ID=1125322
If you want to have a second set entry, you will need to convince the catalog
side, not the inventories side. 
However, the last formal request for this was discarded:
https://www.bricklink.com/message.asp?ID=1127561
|
 |
| Author: | Turez | | Posted: | May 16, 2021 09:16 | | Subject: | Re: Inventory Change Request for Set 3118-1 | | Viewed: | 13 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, polip writes:
| | Please make changes to the following inventory:
* Add 1 Part 6891pb02c02 Light Lime Scala Wall, Vertical Grooved 40 x 2 x 22 2/3 with Window and Door, with Stripe White on Medium Orange Pattern (Alternate) (match ID 1)
Comments from Submitter:
The 6891pb02c02 wall in the set is not light yellow. I have light lime. The image of the box is also light lime.
|
Based on the instructions (attached) and several used sets which I just checked,
this really looks like a different color than in set 3119. Could you add a photo
of your part?
We would also need one in light lime for the catalog entry.
|
|
|
| Author: | Turez | | Posted: | May 16, 2021 08:01 | | Subject: | Re: Inventory Change Request for Set 4505-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, normann1974 writes:
| | In Inventories Requests, normann1974 writes:
| | Please make changes to the following inventory:
* Add 1 Part 4032b Black Plate, Round 2 x 2 with Axle Hole (x Shape) (Alternate) (match ID 1)
* Change 3 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
* Change 3 Part Yellow {44567 Hinge Plate 1 x 2 Locking with 1 Finger on Side (Undetermined Type) to 44567a Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove}
* Change 1 Part Black 4032 Plate, Round 2 x 2 with Axle Hole {match ID 0 to 1}
Comments from Submitter:
If 4032 has been improperly split, this set may never have come with 4032. Source: Parted out sealed set.
|
|
Based on previous change requests it looks like all black 4032 were 4032b at
that time. I have therefore removed 4032 from the inventory.
(4032 (with + style) was still used in other colors, though.)
| |
BTW - my set didn't come with extra 2412b. Was this confirmed in a sealed
set?
|
The change log shows that the inventory originally had 2 LBG 2412b. One was removed
in October, 2004 but was added back again as an extra part in February, 2005
by nova (frequent contributer at that time and registered inventories verifier).
So yes, I would say it was confirmed in at least two sealed sets.
The extra yellow plate 1x2, however, should be in the regular items section.
It is needed to build the seaplane model on pages 21-28 and the inventory data
from LEGO.com confirm that there should be four of this part in the set. I fixed
this.
|
|
|
| Author: | Turez | | Posted: | May 15, 2021 03:31 | | Subject: | Re: Inventory Change Request for Set 3942-1 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Bricklanta writes:
| | Please make changes to the following inventory:
* Add 1 Part 92355a Medium Lavender Friends Accessories Sponge (Counterpart)
* Add 1 Part 92355b Medium Lavender Friends Accessories Spray Bottle with Heart (Counterpart)
* Add 4 Part 92355c Medium Lavender Friends Accessories Bow with Heart (Counterpart)
* Add 4 Part 92355d Medium Lavender Friends Accessories Bow (Counterpart)
* Add 1 Part 92355e Medium Lavender Friends Accessories Award Ribbon with Number 1 (Counterpart)
* Add 1 Part 92355f Medium Lavender Friends Accessories Award Ribbon with Number 2 (Counterpart)
* Add 1 Part 92355g Medium Lavender Friends Accessories Comb, Small with Heart (Counterpart)
* Add 1 Part 92355h Medium Lavender Friends Accessories Brush Round, Small (Counterpart)
* Add 2 Part 92355i Medium Lavender Friends Accessories Brush Oval, Large (Counterpart)
|
All these parts are already included in the inventory as part of
* | | 92355 (Inv) Friends Accessories, Animal Show and Grooming Supplies, 16 in Bag (Multipack)
Parts: Friends |
Therefore these requests will not be approved.
|
|
| Author: | Turez | | Posted: | May 14, 2021 15:40 | | Subject: | Re: Inventory Change Request for Set 2928-2 | | Viewed: | 16 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, starbeanie writes:
| | Please make changes to the following inventory:
* Delete 2 Part 3010pb065 White Brick 1 x 4 with Black 'LC 2928' Pattern (Sticker) - Set 2928 (Counterpart)
* Delete 1 Part 6239pb011 White Tail Shuttle with White Airline Bird on Blue Background Pattern on Both Sides (Stickers) - Set 2928 (Counterpart)
Comments from Submitter:
In a properly built set, these parts don't exist. The stickers on them are superseded by the ones on sheet 2928.2stk01 instead.
|
Based on images I have found, it looks like the ANA version is the normal set
plus the extra (loose) sticker sheet. Do you know if this is correct?
If so, I think the stickered parts do not need to be removed since the set would
still have the normal sticker sheet and instructions. The ANA stickers would
then just be an alternate building option.
|
|
| Author: | Turez | | Posted: | May 14, 2021 14:58 | | Subject: | Re: Inventory Change Request for Set 371-2 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Add 1 Part bb0007pb01 Blue Electric, Motor 4.5V Type A 12 x 4 x 4 with '4,5 V.' (4.5 Volt) Pattern Stamped (Alternate) (match ID 1)
* Delete 4 Part 996ac01 Blue Electric, Connector, 1-Way Male Rounded with Hollow Pin (Banana Plug)
* Delete 1 Part x466 White Electric, Wire 12V / 4.5V with two Leads, unspecified length
* Add 1 Part 996ac96blue White Electric, Wire 4.5V with four Blue 1-prong Connectors Hollow Pin, 96 Studs Long
* Add 1 Part 3176c01 Red Plate, Modified 3 x 2 with Hole (Train Coupler Closed) with Hook
* Add 2 Part 3034 White Plate 2 x 8
* Change 1 Part Blue bb0007 Electric, Motor 4.5V Type A 12 x 4 x 4 {match ID 0 to 1}
* Change {1 to 2} Part Red 3176 Plate, Modified 3 x 2 with Hole
|
I believe
[p=]
was produced since 1968
|
???
|
|
| Author: | Turez | | Posted: | May 14, 2021 13:07 | | Subject: | Re: Inventory Change Request for Set 7750-1 | | Viewed: | 27 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
I think you forgot to change the
?
And then a few of those older posts show a set with
* | | bb0012vac01 (Inv) Electric, Train Motor 12V with Wheels Type I with 2 Round Contact Holes with 4 Light Gray Train Rim for 4.5V & 12V Locomotive Wheels (bb0012va / trainrim)
Parts: Electric, Train {Red} |
but
and 6x
(Here: https://www.bricklink.com/messageThread.asp?ID=232698 )
So because of that "in-between" set I fear we cannot use only one match ID number
for all alternates here. And with multiple numbers the inventory would become
quite complicated. I'm not sure it is worth the effort.
BTW do you have evidence that the set came with
and 10x loose
at some time?
|
|
| Author: | Turez | | Posted: | May 13, 2021 11:00 | | Subject: | Re: Inventory Change Request for Set 92176-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Arnaud_13 writes:
| | Please make changes to the following inventory:
* Add 2 Part 4073 White Plate, Round 1 x 1 (Extra)
|
According to this speed build video there should indeed be at least 3 extra 1x1
round plates in white.
https://youtu.be/ar4X4IWqN9c?t=18
Request accepted (and I have adjusted the quantities manually since there already
was an extra entry for this part).
|
|
| Author: | Turez | | Posted: | May 13, 2021 10:18 | | Subject: | Re: Inventory Change Request for Set 10027-1 | | Viewed: | 25 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| | In Inventories Requests, 1974 writes:
| | There are a few sealed sets but could it be found out from the date code?
|
Probably. My seals had a bar code, so I couldn't read the date, but I think
the date is in the bar code.
|
These kind of boxes usually have the batch code on the top narrow side, NOT on
the seals. It is mostly *very* small and sometimes hard to find.
|
|
|
| Author: | Turez | | Posted: | May 13, 2021 10:11 | | Subject: | Re: Inventory Change Request for Set 10027-1 | | Viewed: | 30 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Add 4 Part 32064b Dark Bluish Gray Technic, Brick 1 x 2 with Axle Hole (x Shape) (Alternate) (match ID 2)
* Change 4 Part Dark Gray 32064 Technic, Brick 1 x 2 with Axle Hole {match ID 0 to 2}
Comments from Submitter:
I am sad that when I finally got my hands on one of these it does not solve the mystery.
|
Yeah, in fact, you have opened a new mystery because now I would like to know
if the set also came with dark gray
[p=32064b,10]
at some time. 
| | I am not sure that putting match IDs on all the DBG pieces is worthwhile, but I can do it if requested.
|
No, the inventory note is sufficient here. See also https://www.bricklink.com/message.asp?ID=1111011
|
|
| Author: | Turez | | Posted: | May 13, 2021 10:02 | | Subject: | Re: Inventory Change Request for Set 7750-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, wichtel10000 writes:
| | Please make changes to the following inventory:
* Add 1 Part 4182pb064 Black Door 1 x 4 x 5 Train Right with Finnish 'VR 7750' Pattern (Sticker) - Set 7750 (Alternate)
* Add 1 Part 4181pb064 Black Door 1 x 4 x 5 Train Left with Finnish 'VR 7750' Pattern (Sticker) - Set 7750 (Alternate)
|
There are already pending requests for these.
https://www.bricklink.com/message.asp?ID=1266947
But there is also an issue with them as discussed here:
https://www.bricklink.com/messageThread.asp?ID=255509&nID=1151122
So I'm still not sure if these stickered doors should be counterparts. But
if so, I will approve gunga's requests since he came first.
|
|
| Author: | Turez | | Posted: | May 12, 2021 08:40 | | Subject: | Re: Inventory Change Request for Set 21117-1 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Zmyjak writes:
| | Please make changes to the following inventory:
* Add 3 Part 19732 Black Legs Minecraft Enderman
Comments from Submitter:
Original Lego instruction book
|
These parts and the parts from your other requests are included in this figure:
Therefore your requests will not be approved.
You can click on "Break Minifigures" to see all parts from figures in the parts
list.
|
|
|
| Author: | Turez | | Posted: | May 11, 2021 13:36 | | Subject: | Re: Inventory Change Request for Set 9797-1 | | Viewed: | 36 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, 1977_mauro writes:
| | Please make changes to the following inventory:
* Add 1 Part 973px126c01 White Torso Paradisa Sailboat with Sunset Pattern / Yellow Arms / Yellow Hands (Alternate) (match ID 21)
* Change 1 Part White 973px126newc01 Torso Paradisa Sailboat with Sunset Pattern, Inside with Ribs (Reissue) / Yellow Arms / Yellow Hands {match ID 0 to 21}
Comments from Submitter:
Parted out 3 sets, all had the alternate version of the torso.
|
The only difference between these parts is that
is a special entry only for the current torso mold with long inside ribs (introduced
around 1998)
while the mold of
is not specified (so it can be the current but also an older mold).
See also https://www.leggodt.nl/items/lego/themes-minifigs.php?language=en
So are you saying you got the older mold ("short ribs") in your set? That would
be very unusual for a set from 2006.
|
|
| Author: | Turez | | Posted: | May 11, 2021 05:35 | | Subject: | Inventory Change Request for Set 4002-1 | | Viewed: | 38 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 2412a Blue Tile, Modified 1 x 2 Grille without Bottom Groove / Lip (match ID 1)
* Change 4 Part Blue 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip {Regular to Alternate} {match ID 0 to 1}
Comments from Submitter:
Source: Set from my personal collection which was bought new and not mixed with other parts. All 4 parts in my set are 2412a.
|
|
| Author: | Turez | | Posted: | May 10, 2021 17:53 | | Subject: | Re: Inventory Change Request for Set 6557-1 | | Viewed: | 25 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, jd5775 writes:
| | In Inventories Requests, Turez writes:
| | In Inventories Requests, jd5775 writes:
| | Please make changes to the following inventory:
* Add 1 Part 2412a Blue Tile, Modified 1 x 2 Grille without Bottom Groove / Lip (Alternate) (match ID 1)
* Add 1 Part 2412a Red Tile, Modified 1 x 2 Grille without Bottom Groove / Lip (Alternate) (match ID 2)
* Change 1 Part Blue 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip {match ID 0 to 1}
* Change 1 Part Red 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip {match ID 0 to 2}
|
Could you please let us know what your source is for making these change requests?
(I see you have this set for sale in your store, but it is still sealed. Do you
have a second copy with open box?)
|
Sorry for omitting that. Yes, this is from a second set bought new around the
same time, and never disassembled until yesterday. I only noticed it when struggling
to remove the blue grille from the bow piece and thought it was strange that
a 1997 set would have this part variation.
|
Many thanks. There are already a few sets from 1997 in the catalog which still
had 2412a. Looks like 1997 was the last year of the transition period.
Could you also check the string lengh in your set and replace the undetermined
entry with the correct lengh?
|
|
| Author: | Turez | | Posted: | May 10, 2021 16:49 | | Subject: | Re: Inventory Change Request for Set 3683-1 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Ellum writes:
| | In Inventories Requests, Turez writes:
| | In Inventories Requests, Ellum writes:
| | In Inventories Requests, cerrutinino writes:
| | Please make changes to the following inventory:
* Add 2 Part 3003 Blue Brick 2 x 2
Comments from Submitter:
From the original notice
|
I have this set with building instruction, but nowhere are the 2 part 3003 blue
brick 2 x 2 mentioned in the instruction. Maybe original submitter has mistaken
the set? I would say only a sealed set could confirm their presence in this set.
|
http://www.peeron.com/scans/3683-1/8/
|
Well not in mine. Does this mean they are considered as alternate parts? Note
that they are not mentioned in the instruction text in yours.
|
Wow this is cool - we just discovered another redesigned set! 
See pics at https://www.worthpoint.com/worthopedia/pre-owned-mint-complete-lego-3683-1910486235
(attached for future reference)
Many thanks for noticing that! I will update the inventory accordingly.
|
|
|
| Author: | Turez | | Posted: | May 10, 2021 15:27 | | Subject: | Re: Inventory Change Request for Set 3683-1 | | Viewed: | 27 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Ellum writes:
| | In Inventories Requests, cerrutinino writes:
| | Please make changes to the following inventory:
* Add 2 Part 3003 Blue Brick 2 x 2
Comments from Submitter:
From the original notice
|
I have this set with building instruction, but nowhere are the 2 part 3003 blue
brick 2 x 2 mentioned in the instruction. Maybe original submitter has mistaken
the set? I would say only a sealed set could confirm their presence in this set.
|
http://www.peeron.com/scans/3683-1/8/
|
|
|
|
| Author: | Turez | | Posted: | May 10, 2021 08:43 | | Subject: | Re: Inventory Change Request for Set 5956-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, samsam2 writes:
| | Please make changes to the following inventory:
* Add 1 Part 5956stk01 (Not Applicable) Sticker Sheet for Set 5956 - Sheet 1 (72573/4116669) (Extra)
Comments from Submitter:
Just2Good unboxing sealed set
|
I don't think we should add that extra sticker sheet. TLG very rarely provides
an extra sticker sheet and as Yorbrick already pointed out, the two sheets stick
together so it looks like a packing error. I have found the same in a new set
a few months ago. I will leave this open for a while in case anyone wants to
add anything here.
| | Another question, should the zeppelin ship be split into 2 parts, since it is
assembled only for display purposes?
|
Don't really have an opinion here. But we already have 171 parts in the inventory
while the box says there should be 170. So I would say it is okay for now to
not add another one.
|
|
| Author: | Turez | | Posted: | May 10, 2021 07:57 | | Subject: | Re: Inventory Change Request for Set 6557-1 | | Viewed: | 27 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, jd5775 writes:
| | Please make changes to the following inventory:
* Add 1 Part 2412a Blue Tile, Modified 1 x 2 Grille without Bottom Groove / Lip (Alternate) (match ID 1)
* Add 1 Part 2412a Red Tile, Modified 1 x 2 Grille without Bottom Groove / Lip (Alternate) (match ID 2)
* Change 1 Part Blue 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip {match ID 0 to 1}
* Change 1 Part Red 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip {match ID 0 to 2}
|
Could you please let us know what your source is for making these change requests?
(I see you have this set for sale in your store, but it is still sealed. Do you
have a second copy with open box?)
|
|
| Author: | Turez | | Posted: | May 8, 2021 12:06 | | Subject: | Re: Inventory Change Request for Set 21307-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, d4n33l writes:
| | Please make changes to the following inventory:
* Delete 1 Part 30553 Black Hinge Cylinder 1 x 2 Locking with 2 Fingers, 9 Teeth and Axle Hole on Ends with Slots (Extra)
Comments from Submitter:
You can see an evidence here
https://youtu.be/xAxMAoHMUIk?t=936
|
This extra part was requested to be added by a known and reliable contributer:
https://www.bricklink.com/messageThread.asp?ID=231366
And in addition to that I just checked the set in my personal collection and
it has this extra part. Therefore this request will not be accepted.
|
|
| Author: | Turez | | Posted: | May 8, 2021 07:18 | | Subject: | Re: Inventory Change Request for Set 42115-1 | | Viewed: | 27 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, d4n33l writes:
| | Please make changes to the following inventory:
* Change {4 to 1} Part Black 48729b Bar 1L with Clip Mechanical Claw, Cut Edges and Hole on Side (Extra)
* Change {4 to 3} Part Blue 4274 Technic, Pin 1/2 (Extra)
* Change {6 to 4} Part Black 2780 Technic, Pin with Friction Ridges Lengthwise, Staggered, with or without Center Slots (Extra)
Comments from Submitter:
Checked in 2 different sets!
|
Please see the guideline about extra parts here:
https://www.bricklink.com/help.asp?helpID=1562
"Removing or Changing Extra Items - Extra parts can vary depending on
when and where a set was manufactured, meaning that some new sets may include
them and others may not. The quantity of these extra parts can also vary. Extra
parts are typically not removed or reduced in quantity unless it can be determined
that they were originally added or increased in error."
The 4
and the 6
can be seen here:
https://youtu.be/5c6xoochiOI?t=770
So their quantities will not be changed.
I will have a look at
later.
|
|
| Author: | Turez | | Posted: | May 8, 2021 06:18 | | Subject: | Re: Inventory Change Request for Set 1083-1 | | Viewed: | 25 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 2 Part 6232 Red Brick, Modified 2 x 2 with Pin and Axle Hole
* Add 2 Part 4730 Red Brick, Modified 2 x 2 with Pin and No Axle Hole
|
|
You know box images are not a reliable source.
But here I think we can be certain that this type
did not yet exist at that time.
|
|
| Author: | Turez | | Posted: | May 7, 2021 06:02 | | Subject: | Re: Inventory Change Request for Set 7245-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Atrobbus writes:
| | Please make changes to the following inventory:
* Add 2 Part BA164pb01 White Stickered Assembly 12 x 1 x 2 with White 'POLICE' On Black Background Pattern (Sticker) - Set 7245 - 1 Brick 1 x 12, 1 Brick 1 x 4, 2 Slope, Inverted 2 x 1 (Alternate)
Comments from Submitter:
Hey there, I hope I did this correctly. Basically I have the prisoner transport 7245 in the German (Green/POLIZEI) version and I noticed that there is no counterpart to the english version of BA164pb01 yet. All the other stickers are also listed in the German version, only this one was missing. Have a good one!
|
This request will not be approved since the part BA164pb01 is already included
in the inventory.
A new catalog entry is needed for the German sticker version (see further details
via mail).
|
|
| Author: | Turez | | Posted: | May 7, 2021 05:45 | | Subject: | Re: Inventory Change Request for Set 42099-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, xoshimin writes:
| | Please make changes to the following inventory:
* Add 2 Part 61408 Black Technic, Liftarm, Modified Crank / Pin 1 x 3 - Axle Holes and Squared Pin Hole (Alternate) (match ID 1)
* Change 2 Part Black 33299 Technic, Liftarm, Modified Crank / Pin 1 x 3 - Axle Holes {Regular to Alternate} {match ID 0 to 1}
|
I assume the source for these requests is a sealed set?
|
|
| Author: | Turez | | Posted: | May 6, 2021 14:26 | | Subject: | Re: Inventory Change Request for Set 5004468-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, stephannie writes:
| | I agree with my predecessors. Set 5004468 does NOT contain COL135. It contains
another minifigure, different from the COL135, composed of a head with hollow
stud, which we must create to put an end to the confusion (I propose a name starting
with HOL ...). The subject seems important to me, because the COL135 was valuable,
and its value has dropped due to the release in 2016 of an NON-IDENTICAL minifigure
included in the set 5004468. Some may judge the difference insignificant, it
is not for me. When I buy a minifigure, I hope it to meet my expectations. Some
may judge the difference insignificant, it is not for me. When I buy a minifigure,
I expect it to meet my expectations. A simple note "This minifigure has also
been found with the 'c' style head" is, in my opinion, insufficient,
because the difference is for me clearly established between the two minifigures.
|
I have added
as an alternate part since this is the way how heads variants (blocked open stud/hollow
stud) are currently handled.
|
|
| Author: | Turez | | Posted: | May 6, 2021 12:24 | | Subject: | Re: Inventory Change Request for Set 6464-1 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, 1977_mauro writes:
| | Thanks for changing it! I have not checked if there were other additional parts
but focused more on the differences I have noted.
What can we do with the other two things?
https://www.bricklink.com/message.asp?ID=1269362
The assembled part is not a big deal but the wrong inventorized minifig is...
|
Well, the new minifigure and the assembly need to be added to the catalog:
https://www.bricklink.com/catalogAdd.asp
Please let us know if you have any questions (but have a bit patience, the Admin
team has just been reorganized).
| |
I wanted also update the number of booklets to 11 for the 6464 instruction but
have not find the place to do that?
|
Link above - Change Item: Set
(BTW. you can also add or change other things there like weight or dimensions
of a set, box, etc.)
However the current maximum number of instructions which can be entered is 9
so I would suggest to do nothing here until the system allows larger numbers.
|
|
| Author: | Turez | | Posted: | May 6, 2021 11:17 | | Subject: | Re: Inventory Change Request for Set 6464-1 | | Viewed: | 28 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, 1977_mauro writes:
| | Please make changes to the following inventory:
* Delete 1 Part 2447 Trans-Light Blue Minifigure, Visor Standard
* Add 4 Part 2447 Trans-Dark Blue Minifigure, Visor Standard (Extra)
Comments from Submitter:
There is no trans-light blue visor but only dark-blue visors, 1 in the minifig, 1 in the set, 4 are extra parts.
|
There should be three regular parts, so three are extras. See
http://www.peeron.com/scans/6464-1/1/?id=2922
http://www.peeron.com/scans/6464-1/6/?id=2922
http://www.peeron.com/scans/6464-1/12/?id=2922
I have adjusted the quantities.
I would assume there were also some other extra parts in your set?
|
|
| Author: | Turez | | Posted: | May 4, 2021 12:54 | | Subject: | Re: Pending approval: mineravager01 | | Viewed: | 51 times | | Topic: | Catalog | |
|
| In Catalog, Leftoverbricks writes:
| | In Catalog, Leftoverbricks writes:
| | Can I help the inventory/catalog admin with this part?
|
Bumping this because I got no reply on my previous post. A newish user reserved
this part mineavager01 six weeks ago. It still has the status of 'pending'.
|
Um, no.
https://www.bricklink.com/catalogListOld.asp?invPend=Y
I don't see anything that would prevent you from submitting the inventory.
| | I would like to know if there's as problem with this part that prohibits
the inventory admins from adding it.
In general I know quite a bit about Minecraft in general and have successfully
contributed a couple of the brick built animals to the catalogue so far .
Ask me, I gladly help!
FYI: Here's a knolling picture of this part which I used to build it.
|
|
|
| Author: | Turez | | Posted: | Apr 28, 2021 15:06 | | Subject: | Re: We have a new Inventories Administrator! | | Viewed: | 54 times | | Topic: | Catalog | |
|
| | Thank you all! |
| Author: | Turez | | Posted: | Apr 12, 2021 07:01 | | Subject: | Re: Inventory Change Request for Set 8285-1 | | Viewed: | 31 times | | Topic: | Inventories Requests | |
|
| BrickLink Inventories do not show which parts are needed to build a model but
which parts were included in a set and in the official parts list.
See this help page:
https://www.bricklink.com/help.asp?helpID=1562
"Regular Items - Parts required to build the main model and any secondary models
plus any other parts on the official parts list."
This photo shows the leftover parts after the main model was build, so these
parts were definitely included in the set:
https://brickshelf.com/cgi-bin/gallery.cgi?i=2648859
|
|
| Author: | Turez | | Posted: | Apr 7, 2021 16:54 | | Subject: | Re: Inventory Change Request for Set 10274-1 | | Viewed: | 15 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, normann1974 writes:
| | Please make changes to the following inventory:
* Change 1 Part Dark Bluish Gray {2458 Brick, Modified 1 x 2 with Pin to 44865 Brick, Modified 1 x 2 with Pin and Bottom Stud Holder}
Comments from Submitter:
I someone can confirm that the old variant came in this set, feel free to add it as an alternate. My set came with this new mold, and BL hans't identified it until now.
|
The old mold is visible here, isn't it?
https://youtu.be/SAyYJrGRYKQ?t=917
|
|
|
| Author: | Turez | | Posted: | Apr 7, 2021 15:19 | | Subject: | Re: Chrome Silver Legs - confirmation | | Viewed: | 43 times | | Topic: | Catalog | |
|
| In Catalog Identification, tpr writes:
| |
Can anyone confirm the base colour of the Hips and Legs that are Chrome Silver
|
The hips and legs in my set
are white like on this small image:
https://img.bricklink.com/ItemImage/EXTN/5664.png
|
|
| Author: | Turez | | Posted: | Apr 7, 2021 02:51 | | Subject: | Re: Inventory Change Request for Set 9794-3 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| | In Inventories Requests, Turez writes:
| | I would guess
[p=6048]
is in fact
* | | 6048b Arm Piece with Pin, 2 Fingers and Finger Grooves
Parts: Arm |
|
My picture came out terribly but it is good enough. Are the "grooves" the indentation
in my white circle in the pic?
|
Yes.
|
|
| Author: | Turez | | Posted: | Apr 6, 2021 12:19 | | Subject: | Inventory Change Request for Set 10271-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part {Dark Tan to Medium Nougat} 87079pb904 Tile 2 x 4 with French and Danish Emblem, Black 'DANMARK', 'D' and Eiffel Tower Pattern (Sticker) - Set 10271 (Counterpart)
* Change 1 Part {Dark Tan to Medium Nougat} 87079pb903 Tile 2 x 4 with Heart Shaped Italian and Polish Flag and 'PL' Pattern (Sticker) - Set 10271 (Counterpart)
* Change 1 Part {Dark Tan to Medium Nougat} 87079pb902 Tile 2 x 4 with Swedish and Swiss Emblem and Black 'SWEDEN' Pattern (Sticker) - Set 10271 (Counterpart)
|
|
| Author: | Turez | | Posted: | Apr 6, 2021 07:08 | | Subject: | Re: Inventory Change Request for Set 9794-3 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Change 2 Part White {4032 Plate, Round 2 x 2 with Axle Hole to 4032b Plate, Round 2 x 2 with Axle Hole (x Shape)}
Comments from Submitter:
Sorting my set out, I found this error in the inventory build.
|
I would guess
[p=6048]
is in fact
* | | 6048b Arm Piece with Pin, 2 Fingers and Finger Grooves
Parts: Arm |
----------------
And did your set really come with
?
That would be very unusal for a set from 2004. Maybe it is a later copy, but
then I would expect it to be the 2005 version.
|
|
| Author: | Turez | | Posted: | Apr 5, 2021 17:31 | | Subject: | Re: What color is this gray? | | Viewed: | 33 times | | Topic: | Colors | |
|
| In Colors, gunga writes:
| | Normally I would agree with you about being a quality issue. There have been
some instances where it's almost impossible to tell a 'faded' LBG
from a old light gray.
But you can tell the color difference in these parts from 10 feet away in bad
light. Add in the fact that it's two different molds in the same set, and
they have the exact same color shade... maybe a wrong batch of color mixing in
the molding process?
|
I agree that it was probably a wrong batch of color mixing, but I would still
call this a quality issue - just a different kind of quality issue than the "normal"
color variation.
Btw. here is one more discussion about that:
https://www.bricklink.com/messageThread.asp?ID=262307&nID=1174163
Looks like about one year ago TLG was aware of the issue and added replacement
parts to some sets.
|
|
| Author: | Turez | | Posted: | Apr 5, 2021 14:56 | | Subject: | Re: What color is this gray? | | Viewed: | 43 times | | Topic: | Colors | |
|
| In Colors, gunga writes:
| | In a large box of loose LEGO, I came across several light gray pieces that I
can't identify the color of. They are from set 41154 and the only gray listed
in the inventory is LBG. The pieces in question are the 1x1 bricks as well as
the 1x2x5 bricks. For reference, the arch, 1x4, and 2x4 are light bluish gray.
The liftarm is very light bluish gray.
I know there is a variance in the light bluish gray, but this is a pretty dramatic
shade difference. And they ALL have the same shade, every 1x1 and 1x2x5. They
are LEGO pieces as I checked the studs and the logo is present.
Any ideas? Or have I overlooked something simple?
|
Here is a similar case with 1x1 bricks in "too light bluish gray": https://www.bricklink.com/messageThread.asp?ID=264511&nID=1183633
It is obviously a quality issue.
|
|
| Author: | Turez | | Posted: | Apr 4, 2021 11:06 | | Subject: | Re: Process for make a new inventories | | Viewed: | 32 times | | Topic: | Inventories | |
|
| In Inventories, shiniz writes:
| | Hello,
I want to take inventory of a new set, freshly released. In this set there are
new parts and new minifigures not referenced in Bricklink. Do you know how to
proceed to carry out this inventory?
Thanks for your help
|
Maybe have a look at this other discussion:
https://www.bricklink.com/messageThread.asp?ID=287498&nID=1263495
|
| Author: | Turez | | Posted: | Apr 3, 2021 12:10 | | Subject: | Re: tls095 Lego Employee, Kidsfest 2013 | | Viewed: | 29 times | | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
Maybe it would be better to create a new set entry for that blister pack set?
Like
for example.
|
|
| Author: | Turez | | Posted: | Apr 3, 2021 03:31 | | Subject: | Re: Inventory Change Request for Set 3807-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Change {1 to 2} Part Trans-Clear x165c05 Electric, Fiber Optics Cable 5L
Comments from Submitter:
Sealed set, pic to follow. This correction is not really "correct". I guess the instructions are on the CD-Rom, but this inventory (and 3808 too, I'll bet) is way over on part count because the extras are not broken out.
|
I see you confirmed the inventory...so did you finally find an undetermined part
in a set?
|
|
| Author: | Turez | | Posted: | Apr 1, 2021 07:42 | | Subject: | Re: Set numbers in Part Titles | | Viewed: | 31 times | | Topic: | Catalog | |
|
| In Catalog, The_RealRedHex writes:
| | There are a lot of stickered or printed part stating the set the come from
at the end of the name, for example
At what number does it become unsuitable to put several sets in the name.
I've seen some with 2 but rarely any with 3. Also, does anyone have an opinion
if they should stay or be removed? Because I would much rather a cleaner, simple
title. It is annoying that some don't have this in their title, even if they
only have 1 or 2 sets.
Regards,
Theo - The_RealRedHex
|
See https://www.bricklink.com/messageThread.asp?ID=275787&nID=1224447
|
|
| Author: | Turez | | Posted: | Apr 1, 2021 07:25 | | Subject: | Re: Items Moved Today | | Viewed: | 59 times | | Topic: | Catalog | |
|
| Was it not originally announced that there would be some time for sellers and
anyone else to prepare for these changes? How will that work if the final list
is just published right on the day when the changes are made?
And am I seeing it right that there are some additions (especially the category
changes) which were not part of the original list that was published one month
ago? Despite the fact that it was said there would not be any additions to that
list after March 1st?
Please don't get me wrong, I very much appreciate all the time and effort
you and anyone who is involved are putting into this changes. But with that final
(and rather short) list it feels a bit like a missed opportunity and (regarding
the points mentioned above) yet another instance of bad communication. I am therefore
glad that you will adjust the procedure next time.
As for the changes themselves, I'm fine with them with one exeption: I would
suggest to not move
and
to "Plate, Modified" as long as
has to stay in "Plate". I don't care whether these three parts are in "Plate"
or in "Plate, Modified" but it makes absolutely no sense and creates even more
inconistency to have them in different categories.
|
|
| Author: | Turez | | Posted: | Mar 30, 2021 05:13 | | Subject: | Inventory Change Request for Set 60271-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Dark Orange {33125 Food & Drink Croissant with Rounded Ends to 67338 Food & Drink Croissant with Flat Ends}
Comments from Submitter:
Checked in the set that was used to create the inventory.
|
|
| Author: | Turez | | Posted: | Mar 30, 2021 05:13 | | Subject: | Inventory Change Request for Set 60306-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Dark Orange {33125 Food & Drink Croissant with Rounded Ends to 67338 Food & Drink Croissant with Flat Ends}
Comments from Submitter:
Checked in the set that was used to create the inventory.
|
|
| Author: | Turez | | Posted: | Mar 25, 2021 06:10 | | Subject: | Re: Color Addition | | Viewed: | 42 times | | Topic: | Suggestions | |
|
| In Catalog Requests, Stellar writes:
| | In Catalog Requests, randyf writes:
| | In Catalog Requests, StormChaser writes:
| | In Catalog Requests, starbeanie writes:
| | Can we please add Chrome Red to the catalog? It's the only Chrome color missing.
|
Please provide some examples of parts that need this color.
|
It only comes on two keychains:
* | | 853303 VIP Chrome Red Minifigure Key Chain with LEGO Logo Tile, Modified 3 x 2 Curved with Hole - White Label
Gear: Key Chain |
* | | 5005205 VIP Chrome Red Minifigure Key Chain with LEGO Logo Tile, Modified 3 x 2 Curved with Hole - Yellow Label
Gear: Key Chain |
|
And they are glued, so cant be inventoried, so no parts in chrome red? 
|
At least the arms and legs can be taken off, so it is possible to have singe
parts which would need to be listed in chrome red if you want to sell them.
Btw. this is already mentioned here as part of project 2:
https://www.bricklink.com/help.asp?helpID=2476
|
|
| Author: | Turez | | Posted: | Mar 24, 2021 11:59 | | Subject: | Re: Shock absorber spring type | | Viewed: | 51 times | | Topic: | Catalog | |
|
| In Catalog, normann1974 writes:
| | I'm currently double checking these shock absorbers in my store and I'm
very much in doubt about some of them. I seem to have three different spring
sizes (see image), but BL requires them to be either "soft" or "normal". So
I guess the ones on the left are "soft" and the ones on the right are "normal",
but what about the ones in the middle? Juding by the number of winds visible
they seems to be somewhere in between.
Help is appreciated.
/Jan
|
I fear these springs are still a mess despite the fact that many have been sorted
out with inventory changes...see also
https://www.bricklink.com/message.asp?ID=1216038
|
|
| Author: | Turez | | Posted: | Mar 11, 2021 07:23 | | Subject: | Re: Inventory Change Request for Set 6447-1 | | Viewed: | 29 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, peterzet writes:
| | Hi,
did I understand you correctly, that you need proof that two print variants do
exist?
First, both print variants exist. Chceck the official photos of sets 6329, 6422
and compare with set 6565.
If they have been used as alternatives needs to be validated. But they definitely
exist as two different variants.
Friendly regards
Peter Zalom
|
Official set photos sometimes show parts or designs which did not make it into
the final product. So they would not count as a reliable source here.
If you own a variant of
please add it to the catalog here:
https://www.bricklink.com/wantedCatalog.asp?catType=P
|
|
| Author: | Turez | | Posted: | Mar 8, 2021 09:21 | | Subject: | Re: Image recognition feature | | Viewed: | 40 times | | Topic: | Suggestions | |
|
| In Suggestions, Grosoleil writes:
| | It would be nice to have an image recognition feature for parts, especially minifigure
heads, there are so many!
|
Some item descriptions are a nightmare.
|
|
| Author: | Turez | | Posted: | Mar 7, 2021 08:51 | | Subject: | Re: Changing the release date of an item | | Viewed: | 40 times | | Topic: | Catalog | |
|
| In Catalog, WhiteVanMan writes:
| | Hello Admins (Stormchaser?)
I've been listing several minifig components within my store, and I noticed
that for this item
It's listed to have been released in 2014
I've got one with the 2012 date.
Can this be rectified?
Mine is Flat Silver.
Regards,
Paul
(Also, please check out my other catalogue suggestion?)
|
The entry is correct as is. See answer here:
https://www.bricklink.com/message.asp?ID=1249562
|
|
| Author: | Turez | | Posted: | Mar 2, 2021 06:33 | | Subject: | Re: What color is this? (middle one) | | Viewed: | 41 times | | Topic: | Colors | |
|
| In Colors, leosan30 writes:
| | In Colors, Yo_Yo_Flamingo writes:
| | In Colors, leosan30 writes:
| | These are lego 1x4 tiles I found in my collection, and I am struggling to find
the name of the colour for the piece in the centre. For reference I put next
to it a regular blue plate (TOP) an older yellowed blue plate (RIGHT and 2nd
from top on second pic), a dark green (LEFT) and a dark blue (BOTTOM). This piece
doesn't look old and I have a few more exactly like this. I can't remember
when or where I got these pieces..
I appreciate the help!
|
Brittle Blue or yellowed blue.
| | Thanks! I don't see that listed as a selection for colours when ordering parts.. Is it a rare colour?
|
|
|
"Brittle Blue" means the parts are of very bad quality. Actually the name explains
everything...
https://www.youtube.com/watch?v=OHnNNZbwaNQ
|
|
| Author: | Turez | | Posted: | Mar 1, 2021 15:22 | | Subject: | Re: Inventory Change Request for Set 8830-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, starbeanie writes:
| | Are they needed to build the alternate model of the race car? If so, they are
regular and not extra.
|
That was my thought as well, but no, the alternate model does not need more parts
than the regular one. There is just one additional
needed when the motor is added, but that can be taken from
|
|
| Author: | Turez | | Posted: | Mar 1, 2021 14:42 | | Subject: | Re: Inventory Change Request for Set 8830-1 | | Viewed: | 14 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| | Please make changes to the following inventory:
* Change {6 to 5} Part Light Gray 4265a Technic, Bush 1/2 Toothed, Four Interior Ridges
* Change {5 to 4} Part Light Gray 4274 Technic, Pin 1/2
* Change {1 to 2} Part Light Gray 4265a Technic, Bush 1/2 Toothed, Four Interior Ridges (Extra)
* Change {1 to 2} Part Light Gray 4274 Technic, Pin 1/2 (Extra)
* Change {1 to 2} Part Light Gray 4265b Technic, Bush 1/2 Toothed, Two Interior Ridges (Alternate)
* Change {6 to 5} Part Light Gray 4265b Technic, Bush 1/2 Toothed, Two Interior Ridges (Alternate)
Comments from Submitter:
I know it looks a bit weird with so many extras, but this is what the instructions tell us, and both Peeron and Rebrickable confirm it. And we also reach the official piece count of 169 with these changes (when counting the technic figure without helmet as one part).
http://www.peeron.com/inv/sets/8830-1
https://rebrickable.com/sets/8830-1/rally-6-wheeler/#parts
|
Scan from 1993 US Shop at Home catalog
https://brickset.com/library/catalogues
|
|
|
| Author: | Turez | | Posted: | Mar 1, 2021 14:40 | | Subject: | Inventory Change Request for Set 8830-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {6 to 5} Part Light Gray 4265a Technic, Bush 1/2 Toothed, Four Interior Ridges
* Change {5 to 4} Part Light Gray 4274 Technic, Pin 1/2
* Change {1 to 2} Part Light Gray 4265a Technic, Bush 1/2 Toothed, Four Interior Ridges (Extra)
* Change {1 to 2} Part Light Gray 4274 Technic, Pin 1/2 (Extra)
* Change {1 to 2} Part Light Gray 4265b Technic, Bush 1/2 Toothed, Two Interior Ridges (Alternate)
* Change {6 to 5} Part Light Gray 4265b Technic, Bush 1/2 Toothed, Two Interior Ridges (Alternate)
Comments from Submitter:
I know it looks a bit weird with so many extras, but this is what the instructions tell us, and both Peeron and Rebrickable confirm it. And we also reach the official piece count of 169 with these changes (when counting the technic figure without helmet as one part).
http://www.peeron.com/inv/sets/8830-1
https://rebrickable.com/sets/8830-1/rally-6-wheeler/#parts
|
|
| Author: | Turez | | Posted: | Feb 28, 2021 15:55 | | Subject: | Re: Inventory Change Request for Set 8830-1 | | Viewed: | 13 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| | Please make changes to the following inventory:
* Add 1 Part 3713 Light Gray Technic, Bush (Extra)
* Add 1 Part 4265b Light Gray Technic, Bush 1/2 Toothed, Two Interior Ridges (Alternate) (match ID 4)
* Change {5 to 4} Part Light Gray 3713 Technic, Bush
Comments from Submitter:
This is an answer to
https://www.bricklink.com/messageThread.asp?ID=280504
I also have only 5x
in my set, but I cannot see more than 4 used in the instructions so the fifth part should be the extra.
http://www.peeron.com/scans/8830-1
I can confirm the extra
from my set also.
Please add the match ID 4 for the extra 4265a manually.
|
|
|
|
| Author: | Turez | | Posted: | Feb 28, 2021 15:53 | | Subject: | Inventory Change Request for Set 8830-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3713 Light Gray Technic, Bush (Extra)
* Add 1 Part 4265b Light Gray Technic, Bush 1/2 Toothed, Two Interior Ridges (Alternate) (match ID 4)
* Change {5 to 4} Part Light Gray 3713 Technic, Bush
Comments from Submitter:
This is an answer to
https://www.bricklink.com/messageThread.asp?ID=280504
I also have only 5x
in my set, but I cannot see more than 4 used in the instructions so the fifth part should be the extra.
http://www.peeron.com/scans/8830-1
I can confirm the extra
from my set also.
Please add the match ID 4 for the extra 4265a manually.
|
|
| Author: | Turez | | Posted: | Feb 28, 2021 11:52 | | Subject: | Re: Inventory Change Request for Set 6080-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Dyonisys writes:
| | Please make changes to the following inventory:
* Add 4 Part 4524 Blue Minifigure, Cape Plastic
Comments from Submitter:
Used for the 4 riders of the set. Usage can be seen on page 2 of the building instructions and on the frontside of the original box.
|
They are - as you have already found out - part of the minifigures:
Use the "Break Minifigs" option above the inventory and you will see them.
|
|
| Author: | Turez | | Posted: | Feb 27, 2021 14:57 | | Subject: | Re: Inventory Change Request for Set 4582-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| | In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Add 1 Minifig rac079 Red Bullet
* Delete 1 Part x351 Black Body, Racers Driver
* Delete 1 Part 2446px9 Red Minifigure, Headgear Helmet Motorcycle (Standard) with Flames Yellow and Orange Pattern
* Delete 1 Part 2447 Trans-Black Minifigure, Visor Standard
* Delete 1 Part 3626bpb0022 Yellow Minifigure, Head Male Open Mouth and Teeth, Long Black Hair, One Closed Eye Pattern - Blocked Open Stud
Comments from Submitter:
Look at those ITEM ID numbers!
|
Wow. That had to be one of the first inventories ever added to the site. I have
never seen numbers that low.
|
Have a look at
It all started with a dead minifigure.
|
|
| Author: | Turez | | Posted: | Feb 27, 2021 09:02 | | Subject: | Re: Inventory Change Request for Set 6447-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, peterzet writes:
| | Please make changes to the following inventory:
* Change 1 Part Yellow {3010p15 Brick 1 x 4 with Red Danger Stripes on Printed White Background Pattern to 3010 Brick 1 x 4}
Comments from Submitter:
Hello,
I think I have stumbled over a problem regarding the Yellow Brick 1 x 4 with Red Danger Stripes on Printed White Background Pattern, mold number 3010p15.
Actually, there are two separate patterns for this brick but one is not recognized by Bricklink catalog. The error affects to my understanding sets 6329, 6422 while in set 6565 the correct pattern appears. This can easily be verified by looking at the the official photos of the sets as also provided by Bricklink. Please, count the number of red stripes or check the color of the pattern in the corners! So a new piece has to be introduced into the catalog and sets with the corresponding numbers should be checked.
In the sets 9287, 4222 and 1106 the brick is also present but I am not completely sure which pattern is there to be found.
Hope this small error can be clarified or removed from the catalog.
Have a nice day
PZ
|
There was a discussion about this part a few weeks ago:
https://www.bricklink.com/messageThread.asp?ID=283218&nID=1250137
To get ahead with this issue I just submitted a photo of the part so hopefully
there will be no doubt anymore how the part actually looks like.
For now I do not see any evidence that another print variant exists.
|
|
| Author: | Turez | | Posted: | Feb 27, 2021 06:50 | | Subject: | Re: Set 21016 Sungnyemun/Namdaemun tile | | Viewed: | 25 times | | Topic: | Catalog | |
|
| In Catalog, platinum_lego writes:
| | The picture of
shows an image of the built set. Strangely enough, the printed tile says "Namdaemun"
while the inventory (and the two pictures of the box and instructions) indicate
the printed tile says "Sungnyemun".
Based on the above picture it appears the Namdaemun tile does exist, but can
anyone confirm this with a physical Lego part? Was this printed tile only available
in sets purchased in South Korea?
|
Interesting find. The current set images at Brickset do not show the "Namdaemun"
tile, but there is a note in the set details column which states "Initially named
Namdaemun Gate.".
https://brickset.com/sets/21016-1
I would therefore guess the current BL image might be a preliminary image and
a "Namdaemun" tile does not exist.
|
|
| Author: | Turez | | Posted: | Feb 25, 2021 11:40 | | Subject: | Re: Inventory Change Request for Set 4101-1 | | Viewed: | 17 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| | Please make changes to the following inventory:
* Delete 1 Part 30389b Blue Hinge Brick 2 x 2 Locking with 1 Finger Vertical and Axle Hole (+ Shape) (match ID 1)
* Change 1 Part Blue 30389c Hinge Brick 2 x 2 Locking with 1 Finger Vertical and Axle Hole (x Shape) {Alternate to Regular} {match ID 1 to 0}
* Change 1 Part Red {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)}
* Change 2 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
* Change 8 Part Blue {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301a Hinge Plate 1 x 2 Locking with 1 Finger On End with Bottom Groove}
* Change 2 Part Dark Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301a Hinge Plate 1 x 2 Locking with 1 Finger On End with Bottom Groove}
* Change 2 Part Orange {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301a Hinge Plate 1 x 2 Locking with 1 Finger On End with Bottom Groove}
* Change 2 Part Orange {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
Comments from Submitter:
From sealed set contents.
|
|
|
|
| Author: | Turez | | Posted: | Feb 25, 2021 11:37 | | Subject: | Inventory Change Request for Set 4101-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 30389b Blue Hinge Brick 2 x 2 Locking with 1 Finger Vertical and Axle Hole (+ Shape) (match ID 1)
* Change 1 Part Blue 30389c Hinge Brick 2 x 2 Locking with 1 Finger Vertical and Axle Hole (x Shape) {Alternate to Regular} {match ID 1 to 0}
* Change 1 Part Red {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)}
* Change 2 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
* Change 8 Part Blue {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301a Hinge Plate 1 x 2 Locking with 1 Finger On End with Bottom Groove}
* Change 2 Part Dark Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301a Hinge Plate 1 x 2 Locking with 1 Finger On End with Bottom Groove}
* Change 2 Part Orange {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301a Hinge Plate 1 x 2 Locking with 1 Finger On End with Bottom Groove}
* Change 2 Part Orange {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
Comments from Submitter:
From sealed set contents.
|
|
| Author: | Turez | | Posted: | Feb 25, 2021 11:23 | | Subject: | Re: Inventory Change Request for Set 6048-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, mattmailing writes:
| | Please make changes to the following inventory:
* Delete 1 Part x47 Blue Minifigure, Plume Dragon
* Delete 1 Part 4502w Blue Minifigure, Plume Wheel Sprue Complete, Dragon
Comments from Submitter:
REDUNDANT WITH THE FACT THAT THEY ARE INCLUDED IN THE FIG
|
The figure has only 1x
and 1x
but the set includes two complete sprues so the other parts (one complete wheel
and one single dragon plume) need to be in the regular items section.
See "Additional Information About Regular Items" - "Parts on Sprues" at
https://www.bricklink.com/help.asp?helpID=1562
|
|
| Author: | Turez | | Posted: | Feb 24, 2021 13:55 | | Subject: | Re: 40450 Amelia Earhart - add to catalog?? | | Viewed: | 44 times | | Topic: | Catalog | |
|
| In Catalog, popsicle writes:
Piece count is 203.
And yes the set will be available as a GWP online and in stores (where open)
both in the USA and in Europe next month.
|
|
| Author: | Turez | | Posted: | Feb 22, 2021 11:56 | | Subject: | Re: Inventory Change Request for Set 4655-1 | | Viewed: | 14 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| | Please make changes to the following inventory:
* Change 2 Part Black {30350 Tile, Modified 2 x 3 with 2 Clips - (Undetermined Clip Type) to 30350a Tile, Modified 2 x 3 with 2 Clips Angled}
* Change 5 Part Yellow {30389 Hinge Brick 2 x 2 Locking with 1 Finger Vertical to 30389c Hinge Brick 2 x 2 Locking with 1 Finger Vertical and Axle Hole (x Shape)}
Comments from Submitter:
From sealed set contents.
|
Annoying: Both the large black "base" and the white roof came loose in the box
so the roof looks more used than new. Maybe I should complain to customer service...
|
|
|
| Author: | Turez | | Posted: | Feb 22, 2021 11:53 | | Subject: | Inventory Change Request for Set 4655-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {30350 Tile, Modified 2 x 3 with 2 Clips - (Undetermined Clip Type) to 30350a Tile, Modified 2 x 3 with 2 Clips Angled}
* Change 5 Part Yellow {30389 Hinge Brick 2 x 2 Locking with 1 Finger Vertical to 30389c Hinge Brick 2 x 2 Locking with 1 Finger Vertical and Axle Hole (x Shape)}
Comments from Submitter:
From sealed set contents.
|
|
| Author: | Turez | | Posted: | Feb 22, 2021 08:48 | | Subject: | Inventory Change Request for Set 8874-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black 3665 Slope, Inverted 45 2 x 1 {Regular to Alternate} {match ID 3 to 99}
* Change 1 Part Black 3660 Slope, Inverted 45 2 x 2 {Alternate to Regular} {match ID 3 to 99}
* Change 1 Part Blue-Violet 4495a Flag 4 x 1 Wave Left {match ID 4 to 3}
* Change 1 Part Blue 4495a Flag 4 x 1 Wave Left (Alternate) {match ID 4 to 3}
Comments from Submitter:
See additional instructions image.
Please add a note for the redesign, thanks.
|
|
| Author: | Turez | | Posted: | Feb 22, 2021 07:03 | | Subject: | Re: Colour Identification | | Viewed: | 28 times | | Topic: | Colors | |
|
| In Colors, SurplusParts writes:
| | So on my colour chart here, you have from top left down, old light grey, new
light grey, new dark grey and then old dark grey.
So what colour are the 2 4085a in the middle. They never were released in old
dark grey, but they dont really look old light grey.
I of course know there is colour variations across all colours but i have never
really seen this in the old greys before.
Not sure if i should sell them as light grey as they aren't really.
Any advice appreciated.
Douglas
|
This is a known variation of light gray for these clips.
See
https://www.bricklink.com/messageThread.asp?ID=261737&nID=1171994
https://www.bricklink.com/message.asp?ID=1208961
|
|
| Author: | Turez | | Posted: | Feb 21, 2021 13:30 | | Subject: | Re: Inventory Change Request for Set 4099-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| | I fixed the request to change 44302 to 44302b. It should have been 44302a.
Cheers,
Randy
|
Err...yes of course, thanks. Too many requests at once I guess.
|
| Author: | Turez | | Posted: | Feb 21, 2021 12:09 | | Subject: | Re: Inventory Change Request for Set 4099-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| | I can't get the inventory change form to work last night and today.
|
No problems here (as you can see).
|
|
| Author: | Turez | | Posted: | Feb 21, 2021 11:58 | | Subject: | Re: Inventory Change Request for Set 4099-1 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| | Please make changes to the following inventory:
* Add 2 Part 48183 Black Wedge, Plate 3 x 4 with Stud Notches (Alternate) (match ID 2)
* Add 1 Part 553a Light Gray Brick, Round 2 x 2 Dome Top - Blocked Open Stud without Bottom Axle Holder (match ID 3)
* Delete 1 Part 30389b Light Gray Hinge Brick 2 x 2 Locking with 1 Finger Vertical and Axle Hole (+ Shape) (match ID 2)
* Delete 1 Part 2476 Light Gray Plate, Modified 2 x 2 with Pin on Bottom (match ID 3)
* Change 2 Part Black 4859 Wedge, Plate 3 x 4 without Stud Notches {match ID 0 to 2}
* Change 2 Part Dark Gray {3049 Slope 45 2 x 1 Double / Inverted (Undetermined Underside Type) to 3049b Slope 45 2 x 1 Double / Inverted - without Bottom Tube or Bottom Stud Holder}
* Change 2 Part Dark Gray 48933 Wedge 4 x 4 Triple with Stud Notches {Regular to Alternate}
* Change 1 Part Light Gray 553b Brick, Round 2 x 2 Dome Top - Blocked Open Stud with Bottom Axle Holder x Shape + Orientation {Regular to Alternate} {match ID 0 to 3}
* Change 4 Part Light Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301a Hinge Plate 1 x 2 Locking with 1 Finger On End with Bottom Groove}
* Change 4 Part Light Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth without Bottom Groove}
* Change 2 Part Dark Gray 6069 Wedge 4 x 4 Triple without Stud Notches {Alternate to Regular}
* Change 1 Part Light Gray 30389c Hinge Brick 2 x 2 Locking with 1 Finger Vertical and Axle Hole (x Shape) {Alternate to Regular} {match ID 2 to 0}
* Change 1 Part Light Gray 2476b Plate, Modified 2 x 2 with Pin on Bottom, Small Holes in Plate and Locking Fingers on Underside {Alternate to Regular} {match ID 3 to 0}
Comments from Submitter:
From sealed set contents.
I believe
was always
* | | 2476b Plate, Modified 2 x 2 with Pin on Bottom, Small Holes in Plate and Locking Fingers on Underside
Parts: Plate, Modified |
at that time (~2003).
|
|
|
|
| Author: | Turez | | Posted: | Feb 21, 2021 11:54 | | Subject: | Inventory Change Request for Set 4099-1 | | Viewed: | 40 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 48183 Black Wedge, Plate 3 x 4 with Stud Notches (Alternate) (match ID 2)
* Add 1 Part 553a Light Gray Brick, Round 2 x 2 Dome Top - Blocked Open Stud without Bottom Axle Holder (match ID 3)
* Delete 1 Part 30389b Light Gray Hinge Brick 2 x 2 Locking with 1 Finger Vertical and Axle Hole (+ Shape) (match ID 2)
* Delete 1 Part 2476 Light Gray Plate, Modified 2 x 2 with Pin on Bottom (match ID 3)
* Change 2 Part Black 4859 Wedge, Plate 3 x 4 without Stud Notches {match ID 0 to 2}
* Change 2 Part Dark Gray {3049 Slope 45 2 x 1 Double / Inverted (Undetermined Underside Type) to 3049b Slope 45 2 x 1 Double / Inverted - without Bottom Tube or Bottom Stud Holder}
* Change 2 Part Dark Gray 48933 Wedge 4 x 4 Triple with Stud Notches {Regular to Alternate}
* Change 1 Part Light Gray 553b Brick, Round 2 x 2 Dome Top - Blocked Open Stud with Bottom Axle Holder x Shape + Orientation {Regular to Alternate} {match ID 0 to 3}
* Change 4 Part Light Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301a Hinge Plate 1 x 2 Locking with 1 Finger On End with Bottom Groove}
* Change 4 Part Light Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth without Bottom Groove}
* Change 2 Part Dark Gray 6069 Wedge 4 x 4 Triple without Stud Notches {Alternate to Regular}
* Change 1 Part Light Gray 30389c Hinge Brick 2 x 2 Locking with 1 Finger Vertical and Axle Hole (x Shape) {Alternate to Regular} {match ID 2 to 0}
* Change 1 Part Light Gray 2476b Plate, Modified 2 x 2 with Pin on Bottom, Small Holes in Plate and Locking Fingers on Underside {Alternate to Regular} {match ID 3 to 0}
Comments from Submitter:
From sealed set contents.
I believe
was always
* | | 2476b Plate, Modified 2 x 2 with Pin on Bottom, Small Holes in Plate and Locking Fingers on Underside
Parts: Plate, Modified |
at that time (~2003).
|
|
| Author: | Turez | | Posted: | Feb 16, 2021 07:17 | | Subject: | Re: Some sad news | | Viewed: | 56 times | | Topic: | Catalog | |
|
| Wow, these are really sad news.
Marek, I hope you are well and thank you very very much for everything you have
done for BrickLink and the catalog. It was mostly your (and Randy's) helpful
and positive attitude which convinced me to become a frequent contributer two
years ago.
|
|
| Author: | Turez | | Posted: | Feb 13, 2021 11:52 | | Subject: | Re: Inventory Change Request for Set 3365-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| | Please make changes to the following inventory:
* Add 1 Part 3626cpb0204 Yellow Minifigure, Head Male Brown Eyebrows, White Pupils, Vertical Cheek Lines, Chin Dimple Pattern - Hollow Stud (Alternate) (match ID 3)
* Change 6 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads - (Undetermined Tread Type) to 92409 Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread}
* Change 6 Part Light Bluish Gray {42610c01 Wheel 11mm D. x 8mm with Center Groove with Black Tire 17.5 x 6 Shallow Staggered Treads (42610 / 51011u) to 42610c03 Wheel 11mm D. x 8mm with Center Groove with Black Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread (42610 / 92409)} (Counterpart)
* Change 1 Part Light Bluish Gray {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)} {Alternate to Regular}
* Change 1 Part Light Bluish Gray 4623b Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm) {Regular to Alternate}
Comments from Submitter:
Set unboxing and building at https://brickshelf.com/cgi-bin/gallery.cgi?f=483825
Please add the head note to the inventory of
Someone added (which was the 6mm version at that time) as an alternate in 2011 so I think we can be sure that this set came with both variants.
|
|
|
|
| Author: | Turez | | Posted: | Feb 13, 2021 11:50 | | Subject: | Inventory Change Request for Set 3365-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3626cpb0204 Yellow Minifigure, Head Male Brown Eyebrows, White Pupils, Vertical Cheek Lines, Chin Dimple Pattern - Hollow Stud (Alternate) (match ID 3)
* Change 6 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads - (Undetermined Tread Type) to 92409 Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread}
* Change 6 Part Light Bluish Gray {42610c01 Wheel 11mm D. x 8mm with Center Groove with Black Tire 17.5 x 6 Shallow Staggered Treads (42610 / 51011u) to 42610c03 Wheel 11mm D. x 8mm with Center Groove with Black Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread (42610 / 92409)} (Counterpart)
* Change 1 Part Light Bluish Gray {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)} {Alternate to Regular}
* Change 1 Part Light Bluish Gray 4623b Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm) {Regular to Alternate}
Comments from Submitter:
Set unboxing and building at https://brickshelf.com/cgi-bin/gallery.cgi?f=483825
Please add the head note to the inventory of
Someone added (which was the 6mm version at that time) as an alternate in 2011 so I think we can be sure that this set came with both variants.
|
|
| Author: | Turez | | Posted: | Feb 13, 2021 08:49 | | Subject: | Inventory Change Request for Set 60214-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig cty0964a Burger Chef - White Torso with 8 Buttons, No Wrinkles Front or Back, Black Legs, Dark Brown Hair (Alternate) (match ID 4)
* Change 1 Minifig cty0964 Burger Chef {match ID 0 to 4}
Comments from Submitter:
New minifigure variant as requested here:
https://www.bricklink.com/messageThread.asp?ID=269172&nID=1201843
|
|
| Author: | Turez | | Posted: | Feb 10, 2021 10:51 | | Subject: | Re: Inventory Change Request for Set 70419-1 | | Viewed: | 14 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| | Please make changes to the following inventory:
* Add 1 Part 28621pb0020 Trans-Neon Green Minifigure, Head Alien Ghost with Yellowish Green Face, Beard, Sideburns, Slime Mouth and Flames in Back Pattern - Vented Stud (Alternate) (match ID 1)
* Change 1 Part Trans-Neon Green 3626cpb2453 Minifigure, Head Alien Ghost with Yellowish Green Face, Beard, Sideburns, Slime Mouth and Flames in Back Pattern - Hollow Stud {match ID 0 to 1}
Comments from Submitter:
Set unboxing and building at https://youtu.be/EkqrgBYi7R8?t=470
|
|
|
|
| Author: | Turez | | Posted: | Feb 10, 2021 10:51 | | Subject: | Inventory Change Request for Set 70419-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 28621pb0020 Trans-Neon Green Minifigure, Head Alien Ghost with Yellowish Green Face, Beard, Sideburns, Slime Mouth and Flames in Back Pattern - Vented Stud (Alternate) (match ID 1)
* Change 1 Part Trans-Neon Green 3626cpb2453 Minifigure, Head Alien Ghost with Yellowish Green Face, Beard, Sideburns, Slime Mouth and Flames in Back Pattern - Hollow Stud {match ID 0 to 1}
Comments from Submitter:
Set unboxing and building at https://youtu.be/EkqrgBYi7R8?t=470
|
|
| Author: | Turez | | Posted: | Feb 9, 2021 12:13 | | Subject: | Re: Inventory Change Request for Set 7626-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, normann1974 writes:
| | In Inventories Requests, Turez writes:
| | In Inventories Requests, normann1974 writes:
| | Please make changes to the following inventory:
* Add 3 Part 32064 Black Technic, Brick 1 x 2 with Axle Hole (Alternate) (match ID 1)
Comments from Submitter:
I justed parted out this set and found this variant (all 3 parts).
|
I had checked this inventory in 2019 but I'm still not sure about
and
Did you find one of these variants in your set?
|
No, grooved and solid stud variants of those two.
/Jan
|
Thanks!
|
|
| Author: | Turez | | Posted: | Feb 9, 2021 12:13 | | Subject: | Re: Inventory Change Request for Set 75024-1 | | Viewed: | 12 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, access007 writes:
| | Please make changes to the following inventory:
* Add 2 Part 3030 Black Plate 4 x 10
Comments from Submitter:
Missing Part: Original Instruction
|
I cannot see such plates anywhere. Do you have different instructions?
https://www.lego.com/cdn/product-assets/product.bi.core.pdf/6062747.pdf
|
|
| Author: | Turez | | Posted: | Feb 9, 2021 07:39 | | Subject: | Re: Inventory Change Request for Set 7626-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, normann1974 writes:
| | Please make changes to the following inventory:
* Add 3 Part 32064 Black Technic, Brick 1 x 2 with Axle Hole (Alternate) (match ID 1)
Comments from Submitter:
I justed parted out this set and found this variant (all 3 parts).
|
I had checked this inventory in 2019 but I'm still not sure about
and
Did you find one of these variants in your set?
|
|
| Author: | Turez | | Posted: | Feb 9, 2021 07:19 | | Subject: | Re: set 1944-1 | | Viewed: | 31 times | | Topic: | Catalog | |
|
| In Catalog, samsam2 writes:
| | I'm wondering if these are the same set? The way they are listed seems strange
If one is a set containing a sub-set, shouldn't there
be just one set of instructions and one box?
|
I think it would make sense to "merge" both entries so that there is only one
set entry which has the parts, the minifigure and the gear item in its inventory
like it is also done here
or here
Sellers can always add a note "without storage case" if the only have the box
with bricks for sale so I don't see any reason for a separate entry for
.
And calling a set "Basic Set with Storage Case" when it actually does NOT include
the storage case is definitely misleading.
|
|
| Author: | Turez | | Posted: | Feb 7, 2021 11:04 | | Subject: | Inventory Change Request for Part Thunderbird01 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
https://www.bricklink.com/messageThread.asp?ID=282253
|
|
| Author: | Turez | | Posted: | Feb 7, 2021 11:04 | | Subject: | Inventory Change Request for Part occamy01 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
https://www.bricklink.com/messageThread.asp?ID=282253
|
|
| Author: | Turez | | Posted: | Feb 7, 2021 10:58 | | Subject: | Re: Inventory Change Request for Set 6210-1 | | Viewed: | 12 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| | Please make changes to the following inventory:
* Change 3 Part Tan 41539 Plate 8 x 8 (Alternate) {match ID 1 to 99}
* Change 3 Part Tan 4151b Plate, Modified 8 x 8 with Grille and Hole in Center {match ID 1 to 99}
* Change 28 Part Reddish Brown 30350a Tile, Modified 2 x 3 with 2 Clips Angled {Alternate to Regular} {match ID 5 to 1}
* Change 28 Part Reddish Brown 30350c Tile, Modified 2 x 3 with 2 U Clips {Regular to Alternate} {match ID 5 to 1}
* Change 8 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
* Change 2 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
* Change 2 Part Light Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301a Hinge Plate 1 x 2 Locking with 1 Finger On End with Bottom Groove}
Comments from Submitter:
Set unboxing and building at https://brickshelf.com/cgi-bin/gallery.cgi?f=521179
and at https://brickshelf.com/cgi-bin/gallery.cgi?f=187716
Please add a note for the redesign.
|
|
|
|
| Author: | Turez | | Posted: | Feb 7, 2021 10:57 | | Subject: | Inventory Change Request for Set 6210-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Tan 41539 Plate 8 x 8 (Alternate) {match ID 1 to 99}
* Change 3 Part Tan 4151b Plate, Modified 8 x 8 with Grille and Hole in Center {match ID 1 to 99}
* Change 28 Part Reddish Brown 30350a Tile, Modified 2 x 3 with 2 Clips Angled {Alternate to Regular} {match ID 5 to 1}
* Change 28 Part Reddish Brown 30350c Tile, Modified 2 x 3 with 2 U Clips {Regular to Alternate} {match ID 5 to 1}
* Change 8 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
* Change 2 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
* Change 2 Part Light Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301a Hinge Plate 1 x 2 Locking with 1 Finger On End with Bottom Groove}
Comments from Submitter:
Set unboxing and building at https://brickshelf.com/cgi-bin/gallery.cgi?f=521179
and at https://brickshelf.com/cgi-bin/gallery.cgi?f=187716
Please add a note for the redesign.
|
|
| Author: | Turez | | Posted: | Feb 7, 2021 10:30 | | Subject: | Re: Inventory Change Request for Set 4768-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| | Please make changes to the following inventory:
* Change 1 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
* Change 5 Part Black 3747a Slope, Inverted 33 3 x 2 without Connections between Studs {match ID 3 to 1}
* Change 5 Part Tan 3010 Brick 1 x 4 {match ID 1 to 99}
* Change 5 Part Black 3747b Slope, Inverted 33 3 x 2 with Connections between Studs (Alternate) {match ID 3 to 1}
* Change 5 Part Tan 3659 Brick, Arch 1 x 4 (Alternate) {match ID 1 to 99}
Comments from Submitter:
Checked in set from my collection which was bought new and not mixed with any other parts.
Please add a note for the redesign. Pic following.
|
|
|
|
| Author: | Turez | | Posted: | Feb 7, 2021 10:29 | | Subject: | Inventory Change Request for Set 4768-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
* Change 5 Part Black 3747a Slope, Inverted 33 3 x 2 without Connections between Studs {match ID 3 to 1}
* Change 5 Part Tan 3010 Brick 1 x 4 {match ID 1 to 99}
* Change 5 Part Black 3747b Slope, Inverted 33 3 x 2 with Connections between Studs (Alternate) {match ID 3 to 1}
* Change 5 Part Tan 3659 Brick, Arch 1 x 4 (Alternate) {match ID 1 to 99}
Comments from Submitter:
Checked in set from my collection which was bought new and not mixed with any other parts.
Please add a note for the redesign. Pic following.
|
|
| Author: | Turez | | Posted: | Feb 7, 2021 10:22 | | Subject: | Inventory Change Request for Set 60266-1 | | Viewed: | 11 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Checked in set from my collection which was bought new and not mixed with any other parts.
|
|
| Author: | Turez | | Posted: | Feb 7, 2021 10:22 | | Subject: | Inventory Change Request for Set 71705-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 13 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Checked in set from my collection which was bought new and not mixed with any other parts.
|
|
| Author: | Turez | | Posted: | Feb 7, 2021 10:21 | | Subject: | Inventory Change Request for Set 60161-1 | | Viewed: | 11 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Checked in set from my collection which was bought new and not mixed with any other parts.
|
|
| Author: | Turez | | Posted: | Feb 7, 2021 10:21 | | Subject: | Inventory Change Request for Set 70618-1 | | Viewed: | 10 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 17 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Checked in set from my collection which was bought new and not mixed with any other parts.
|
|
| Author: | Turez | | Posted: | Feb 7, 2021 10:21 | | Subject: | Inventory Change Request for Set 10257-1 | | Viewed: | 11 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Checked in set from my collection which was bought new and not mixed with any other parts.
|
|
| Author: | Turez | | Posted: | Feb 7, 2021 10:21 | | Subject: | Inventory Change Request for Set 42056-1 | | Viewed: | 10 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 16 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Checked in set from my collection which was bought new and not mixed with any other parts.
|
|
| Author: | Turez | | Posted: | Feb 7, 2021 10:21 | | Subject: | Inventory Change Request for Set 42043-1 | | Viewed: | 10 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 21 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Checked in set from my collection which was bought new and not mixed with any other parts.
|
|
| Author: | Turez | | Posted: | Feb 7, 2021 10:20 | | Subject: | Inventory Change Request for Set 10247-1 | | Viewed: | 11 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
Checked in set from my collection which was bought new and not mixed with any other parts.
|
|
| Author: | Turez | | Posted: | Feb 7, 2021 10:20 | | Subject: | Inventory Change Request for Set 42030-1 | | Viewed: | 9 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
* Change 1 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole} (Extra)
Comments from Submitter:
Checked in set from my collection which was bought new and not mixed with any other parts.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
Germany, Niedersachsen
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
