Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | LeeGo73 | Posted: | Feb 18, 2022 16:18 | Subject: | ID part | Viewed: | 122 times | Topic: | Inventories | Status: | Open | |
|
| Can't find this part.
1x1 plate with a stepped stud, bottom of stud is normal diameter/height. On top
another 'stud' with smaller diameter and normal height.
|
|
Author: | Leftoverbricks | Posted: | Feb 16, 2022 09:52 | Subject: | pls change weight of min109 | Viewed: | 45 times | Topic: | Inventories | Status: | Open | |
|
| I previously changed weight of min109 from 0 to 3.45. This should be 3.83 because
I forgot the neck bracket 18986.
|
Author: | Leftoverbricks | Posted: | Feb 15, 2022 11:21 | Subject: | Question about 21180 animals | Viewed: | 75 times | Topic: | Inventories | Status: | Open | |
|
| Hi,
I already successfully submitted 4 animals (as counter parts) for set
but there are two more to go. I submitted mineguardian01a and mineguardian02a
and made a couple of notes/questions.
Please contact me so I can get this job done.
Thanks
|
Author: | Graham. | Posted: | Feb 14, 2022 09:43 | Subject: | 71390 what happened? | Viewed: | 132 times | Topic: | Inventories | Status: | Open | |
|
| inventory was showing as pending for a long while now it shows "N/A"
? Thanks
|
Author: | YoHowie | Posted: | Feb 8, 2022 00:27 | Subject: | Order for part I have never had in inventory | Viewed: | 108 times | Topic: | Inventories | Status: | Open | |
|
| Has anyone else ever received an order for a part that has never been in their
inventory. I went back 4 months in old brickstore inventories and I could not
find where I had a Green Plate, Round 1 x 1 with Flower Edge (4 Knobs / Petals)
33291. But today I received an order for 40. Didn't show a remark for location
either.
|
|
Author: | apollo350 | Posted: | Feb 7, 2022 15:02 | Subject: | adding owned pieces to a wanted list | Viewed: | 39 times | Topic: | Inventories | Status: | Open | |
|
| I have recently inventoried all of the spare pieces I own. How do I add/apply
them to wanted lists that I have on this site without doing it manualy? I had
created the invnetory on rebrickable and then tried to upload here but is just
shows up as a wanted list to purchase for the quantity of parts I have.
Thanks
|
Author: | LeeGo73 | Posted: | Feb 4, 2022 16:52 | Subject: | Trans-red 6126b | Viewed: | 102 times | Topic: | Inventories | Status: | Open | |
|
| Does this part exist in trans-red?
I got one, but it does not have the small flat side in the base ring and no LEGO
logo or other markings visible. Fake?
|
|
Author: | Ziegelmeister | Posted: | Feb 4, 2022 15:53 | Subject: | Color shift or alternates? 71741 | Viewed: | 79 times | Topic: | Inventories | Status: | Open | |
|
| I parting out some 71741’s today and stopped when I saw this.
Two sets. Bags 4 and 24 are loaded with them. Set on the left is more blue,
set on right is more teal. Laptop is in use by wife for a while so I can’t
access brickstore. Is this a know issue? are they considered different colors
or are theee alternates?
|
|
|
|
Author: | mdreier | Posted: | Feb 3, 2022 16:01 | Subject: | Identifying a piece in set 5887 instructions | Viewed: | 132 times | Topic: | Inventories | Status: | Open | |
|
| Hello, I am hoping someone can help me identify a piece in set 5887 (Dino Defense
HQ, circled in the attached page from the instructions' inventory). I've
got a complete set except for these pieces and I'm wondering what I'm
missing. I don't think these pieces are listed in the Bricklink parts list
for this set, and I also can't find where they're used in the building
instructions. Many thanks to anyone who is able to help!
|
|
|
Author: | jgrossman1025 | Posted: | Feb 2, 2022 07:42 | Subject: | Help Buying from own store inventory | Viewed: | 106 times | Topic: | Inventories | Status: | Open | |
|
| Hello,
I was thinking about building a MOC from my own inventory and would like some
help with how to go about that. I have about 70% of the parts needed, what i
would like to do is take those pieces, and make it so no one can buy them from
my store, but they are still in bricklink so i can see what drawer they are in.
How would i go about doing this? Is this what the stockroom feature is for?
Thanks, NG
|
|
Author: | Betteroffburnt | Posted: | Jan 31, 2022 15:57 | Subject: | Transfer one store inventory to another store | Viewed: | 92 times | Topic: | Inventories | Status: | Open | |
|
| Good morning,
I am considering selling my store and will be curious if we are able to transfer
the complete inventory from my store to the other store . This would save alot
of time re adding everything to the inventory list
Thanks
Dylan
|
Author: | Leftoverbricks | Posted: | Jan 31, 2022 11:03 | Subject: | Help needed with inv of 21178-1? | Viewed: | 62 times | Topic: | Inventories | Status: | Open | |
|
| I see that this set
is in pending approval status for quite a while.
Don't know if there are any issues, but I'm glad to help. You can contact
me with a private msg or in the Forum (but I'm not very active here lately).
Martin
|
Author: | aboyer | Posted: | Jan 22, 2022 15:22 | Subject: | Export computer-friendly inventory of a set? | Viewed: | 63 times | Topic: | Inventories | Status: | Open | |
|
| Before I spend any time trying to parse the HTML you get from the printer-friendly
version - is there any way to export the inventory of a set? Just the part number,
description, color, quantity, etc., without the formatting etc.
-Andrew
|
Author: | andrewbergen123 | Posted: | Jan 22, 2022 02:20 | Subject: | Train bogie | Viewed: | 82 times | Topic: | Inventories | Status: | Open | |
|
| Hey there! i’m in need of a brick built train bogie for set 7938, the bigger
set for the rear non powered engine. if anyone has one available please let me
know!
|
|
Author: | Leftoverbricks | Posted: | Jan 9, 2022 12:02 | Subject: | Need help with inventory 20194 Titanic? | Viewed: | 134 times | Topic: | Inventories | Status: | Open | |
|
| Hi,
I'm guessing Jennifer is doing this very large inventory (but maybe I'm
wrong).
Anyway I'm happy to help wherever I can. Just send me a note.
Here's my Titanic on display...
|
|
|
Author: | NaliKawi | Posted: | Jan 9, 2022 10:16 | Subject: | Set 75267-1 update needed | Viewed: | 54 times | Topic: | Inventories | Status: | Open | |
|
| The inventory for set 75267-1, Mandalorian Battle Pack, shows only 2 of item
61190d, Dark Bluish Gray Minifigure, Helmet Antenna / Rangefinder for Helmet
SW Clone Trooper with Holes.
There are 4 with the set, as shown in the Lego Instructions and that I found
in the set during assembly. Everything else matches what I found. Just FYI -
great job and truly appreciate the work put into this site.
|
|
Author: | connectabrick | Posted: | Jan 4, 2022 10:57 | Subject: | How to bulk update remarks | Viewed: | 66 times | Topic: | Inventories | Status: | Open | |
|
| Hello everyone
I'd like to do a bulk update to my remarks, but I'd like to avoid taking
my store offline if I can. I've played a little with the bulk upload, but
this doesn't seem to support a change to a listing without the quantity changing.
Can anyone tell me how I can make bulk changes to remarks?
Stuart
|
|
Author: | SAX000 | Posted: | Jan 3, 2022 17:58 | Subject: | Want to learn the ropes to contribute! | Viewed: | 105 times | Topic: | Inventories | Status: | Open | |
|
| Hello,
Keen to learn the process of adding new inventories for sets, and also adding
detailed inventories for mini figures.
is there any how-to videos out there?
adding a minifigure inventory to a set that has already been added to the database.
Should this be classed as a new inventory, or editing a current one.
If anyone had 5-10 minutes to point me in the right direction, I am keen to learn
and help!
Thank you!
|
|
Author: | Ziegelmeister | Posted: | Dec 31, 2021 14:22 | Subject: | Combining lots once uploaded to inventory | Viewed: | 66 times | Topic: | Inventories | Status: | Open | |
|
| I'm not sure how this happened - but I'm sure it was user error on my
part.
I seem to have several lots that are showing up twice and they're under different
prices to boot. I've uploaded inventory two ways; parting out directly in
Bricklink, and copying/uploading from Brickstore and combine lots with the new
pricing/remarks.
I must have missed that button at some point with one of the uploads. I looked
through the inventory page but nothing is jumping off the page at me for how
to combine lots. Is there a work around for that instead of manually going down
through it all and adding the parts to one entry and deleting the other?
|
|
Author: | Turez | Posted: | Dec 31, 2021 11:45 | Subject: | Random BeatBits in Sets | Viewed: | 592 times | Topic: | Inventories | Status: | Open | |
|
| Hi everyone,
maybe some of you have noticed it already in the change log, the Vidiyo inventories
have been updated today to better reflect what is actually included in the sets.
A brief summary:
There are 14 "groups" of random BeatBits. Lime and dark turquoise have three
groups, the other colors have two groups. See this image (or the attached images)
for the contents of the groups:
https://dl.dropbox.com/s/s5u3fdw3myf6e68/Vidiyo_BeatBits.jpg
The large sets and the BeatBoxes include one BeatBit from each group. This ensures
that there are no duplicate BeatBits in any set.
The bandmates include two BeatBits from different but fixed groups, e.g.
always comes with one BeatBit from "Dark Turquoise 2" and one BeatBit from "Yellow
1".
That is what is now shown in the inventories.
Special thanks go to BrickLink member gvbricks who provided the initial
data for this little project here: https://www.1000steine.de/de/gemeinschaft/forum/?entry=1&id=453391#id453391
I hope you like the new format for the Vidiyo set inventories and wish you a
happy New Year.
Jonas
|
|
|
Author: | SurplusParts | Posted: | Dec 18, 2021 03:05 | Subject: | Part 15535pb06 | Viewed: | 51 times | Topic: | Inventories | Status: | Open | |
|
| In the inventory for
this part is listed as
However, as you can see from the photo, the ones i have in the two sets i opened
today are clearly reddish brown frosting (pictured next to a reddish brown and
dark brown plate).
I am wondering if it was a mistake in the initial identification, or if it
is like these two parts...
where there is a very similar part with different shades of frosting?
Can someone check their stock to see what they have??
|
|
|
Author: | Orphan_Bricks | Posted: | Dec 1, 2021 01:29 | Subject: | wing | Viewed: | 63 times | Topic: | Inventories | Status: | Open | |
|
| Can anyone remember the old category for this part?
98347 Wing 1 x 4 with Pin Hole
Catalog: Parts: Wing
I have several listed in my inventory, but I cannot locate them in my bins.
I believe that this as a fairly new category in the catalogue, but I cant recall
the old category.
Thanks!
|
|
Author: | HC | Posted: | Nov 25, 2021 10:58 | Subject: | technic figure parts | Viewed: | 58 times | Topic: | Inventories | Status: | Open | |
|
| hi,
just a question..
why is there no option to list technic figure parts?
[outside the feet]
I do have some parts..and also need some parts to restore or complete figures
the figures can be disassembled the same way as minifigs more or less
and I do not believe I am the only one who would like this possibility
I have no experience in catalog or inventory requests though
but maybe someone who knows how can
|
|
Author: | SRvanKlink | Posted: | Nov 17, 2021 11:17 | Subject: | setting Pkg type | Viewed: | 71 times | Topic: | Inventories | Status: | Open | |
|
| Ploughing through the forum, I can't find satisfying answers to my questions:
1) I sell several used sets, without box. As I enter custom weight and dimensions,
does the system pick this up automatically at instant check-out? (Without changing
Pkg type, so default at volume bound).
2) If so, is there any need for me to change Pkg type?
3) why does 'volume bound' appear in the drop-down menu when the default
is already set to volume bound?
4) Does 'manual' suggest an invoice needs to be sent manually?
5) What does '--' suggest?
Thank you in advance for your help, Sjors
|
|
Author: | BrickCastle60 | Posted: | Nov 17, 2021 08:27 | Subject: | When will the inventories be listed on BL???? | Viewed: | 116 times | Topic: | Inventories | Status: | Open | |
|
| Hi,
it would be very nice if the inventory of 41937 is listed ... it's from the
summer of this year! And we are also interested in the inventory lists of 60293
& 60295 ...
Thank you!
Tanja
|
Author: | happycedi | Posted: | Nov 16, 2021 03:56 | Subject: | Can't find an add 66686 City Great Value Pack | Viewed: | 69 times | Topic: | Inventories | Status: | Open | |
|
| I bought some of this set but i can't put it in my inventory. i dont know
how to book in new sets.
can anyone help me?
|
Author: | BonfireBricks | Posted: | Nov 4, 2021 08:40 | Subject: | 71391 Super Mario Bowser's Airship | Viewed: | 64 times | Topic: | Inventories | Status: | Open | |
|
| Is there any way of knowing when this set will have an inventory available?
Thanks!
|
Author: | bobnikolov | Posted: | Nov 1, 2021 12:31 | Subject: | 7913 inventory doubts | Viewed: | 77 times | Topic: | Inventories | Status: | Open | |
|
| I bought the mentioned set 7913 Clone Trooper Battle Pack around 2012-2013 for
my children. Meanwhile they grew and the set became redundant so i decided to
list what left here.
My surprise was that all the figures in the set are with 'Hollow Stud'.
Is that possible? I doubt the children changed them because they never had a
set with 3626cpb0314 referring to the catalog
Has anyone encountered something like this?
|
|
Author: | herisson77 | Posted: | Oct 31, 2021 02:20 | Subject: | 7287 Police Boat | Viewed: | 62 times | Topic: | Inventories | Status: | Open | |
|
| Hello,
First I want to thank you beacause Bricklink is a marvellous tool for Lego collector.
About the Set 7287-1 Police boat, the radio in the inventory is the 3962b reference
but when you look at the building instruction, page 3, it looks like to the 19220
reference. If you could have a look
Thank you very much
Best regards
|
|
Author: | janzenroth | Posted: | Oct 26, 2021 13:44 | Subject: | Is there a log of inventory changes? | Viewed: | 74 times | Topic: | Inventories | Status: | Open | |
|
| So I just had a mini disaster. I added some pieces to my store on Thursday while
I was away from home (not many - maybe 100-200 pieces). Somehow I managed to
lose the bag of pieces that I had added to my store. I can see in my store inventory
which pieces were recently added that were new lots, but is there a way to find
out which lots I increased in number on that day so I can adjust them down?
I had hoped that the bag of pieces would show up, but it now looks as if they
are officially lost.
Frustrating...
Evan
|
|
Author: | here4bricks614 | Posted: | Oct 26, 2021 01:34 | Subject: | 2453 Undetermined type changes | Viewed: | 85 times | Topic: | Inventories | Status: | Open | |
|
| I have these sets. Stop motion videos found online can also provide more confirmation.
Set 9468's 2453 (Undetermined Type) is 2453b (Solid Stud) (This set has 2453b
as the alternate to the undetermined type. Perhaps this was an error? I don't
quite understand there needing to be an undetermined type if there is a non-UDT
type in the set.)
Set 6860's 2453 (Undetermined Type) is 2453b (Solid Stud)
Set 3834's 2453 (Undetermined Type) is 2453a (Blocked Open Stud or Hollow
Stud)
Set 8971's 2453 (Undetermined Type) is 2453a (Blocked Open Stud or Hollow
Stud)
Set 2856134's 2453 (Undetermined Type) is 2453a (Blocked Open Stud or Hollow
Stud)
|
|
Author: | Erikschoneveld | Posted: | Oct 14, 2021 13:41 | Subject: | Part out a set into my inventory | Viewed: | 81 times | Topic: | Inventories | Status: | Open | |
|
| Hi all,
I want to part out a set into my inventory, but I tried it now a couple of times,
but i can not come further then Edit Items. It is the 71741. Is it to big to
put it this way in my inventory?
Greetings,
Erik Schoneveld
|
Author: | r.godfrey | Posted: | Oct 14, 2021 05:44 | Subject: | Set 7171-1 Sebulba | Viewed: | 142 times | Topic: | Inventories | Status: | Open | |
|
| Hi Admins,
No idea where to post this....
When you choose Break minifigures from this set then Sebulba (one piece) disappears
from the inventory list. Is this a glitch? thanks
rebecca
|
Author: | aacleaver0229 | Posted: | Oct 12, 2021 15:54 | Subject: | Pirate Flintlock Musket part 2561 Molding | Viewed: | 112 times | Topic: | Inventories | Status: | Open | |
|
| I'm curious if anyone has this information available. What year did Lego
change the molding from the "old style" to the "new style" on the musket? I'm
guessing it was in the Pirates 2 release but cannot confirm. Any help would be
appreciated (-:
|
|
Author: | horseshoe13 | Posted: | Oct 9, 2021 15:04 | Subject: | Question on how to get a part # corrected | Viewed: | 66 times | Topic: | Inventories | Status: | Open | |
|
| Hello,
Does anyone know who to contact or how for a part number that is incorrectly
listed? It is listed incorrectly in several sets that we've checked. It's
the trans-clear dome, Lego #6150320 and it should be Bricklink #30151b, but it
is definitely showing the incorrect part and we have received the incorrect part
when ordering. We are building the Monsters Haunted House, #10228, and it calls
for 2 of these. It is also in the Assembly Square modular set, and shows on
the Bricklink parts list incorrectly.
Thanks to anyone who can help.
|
|
Author: | dwight | Posted: | Oct 7, 2021 23:39 | Subject: | Questions about set 6394 - Metro Park... | Viewed: | 144 times | Topic: | Inventories | Status: | Open | |
|
| I have a question for you all…
I’m inventorying set 6394 – Metro Park & Service Tower. I purchased this set
new, built it once and had it on display for years. I eventually bagged it up
whole when I had to move. Now that I’m inventorying it I’m finding that:
• Two of the hoses were listed as White when they were Light Gray in mine
• The 2348b is Trans-Light Blue when the one in my set is Trans-Clear
• Parts 3068bp22 and 3068bp23 are listed a White while mine are Light Gray
• The flowers are randomly off by color. I have Blue but no Blue are listed
Should I worry about this when listing this as complete? Should I suggest changes
to the inventory of this set? Should I just stop worrying and go to bed? 😊
Thanks,
-Dwight
|
|
Author: | askdrhook | Posted: | Oct 5, 2021 09:50 | Subject: | Inventory of coast guard set 369 incorrect | Viewed: | 79 times | Topic: | Inventories | Status: | Open | |
|
| In the coast guard set 369 the number of red bricks 1x4 and 1x6 is too small
and only correct, if the alternative part with sticker is counted as usual inventory.
This is not correct in my eyes. Therefore the number of red bricks 1x4 has to
be 10 and the number of red bricks 1x6 needs to be 8.
I just checked twice how it’s possible to build this set along the inventory,
using the original building instruction.
Btw in the instructions there’s an unclear view on the stairs to the helicopter
platform, which can lead to a lack of two black bricks 1x1 at the end. There
must be a brick 1x4 for correct stairs.
|
|
Author: | STEEL | Posted: | Oct 5, 2021 00:41 | Subject: | Making Inventory Changes ??? | Viewed: | 63 times | Topic: | Inventories | Status: | Open | |
|
| How does one enter missing information about a set?? I have an old set BNIB that
has no weight or box size entered. I tried "Inventory Change Request", but that
is not what I need.
|
Author: | Ossdorp | Posted: | Sep 30, 2021 17:45 | Subject: | 42126 Ford F-150 Raptor | Viewed: | 86 times | Topic: | Inventories | Status: | Open | |
|
| Hi,
I was wondering were this set is?
I can't find it on Bricklink.
Anyone knows?
Kind regards,
Tim
|
Author: | Doubletap28 | Posted: | Sep 24, 2021 09:48 | Subject: | How long does the inventory take? | Viewed: | 108 times | Topic: | Inventories | Status: | Open | |
|
| Good morning everyone,
I was just curious because I’ve never asked or seen before about how long it
usually takes to part out into the brick link inventory i’m really wanting to
part out the new stadium camp nou and I’ve also had the Adidas shoe for four
months now. I see that the inventory is being worked on for the shoe but
it’s been like that for about a week probably. So just want to know if anyone
knows any details and how long part outs usually take?
Thanks
Eric
|
|
Author: | Ziegelmeister | Posted: | Sep 22, 2021 17:15 | Subject: | Adding Inventory of 10284 | Viewed: | 52 times | Topic: | Inventories | Status: | Open | |
|
| I've parted out two not knowing this wasn't inventoried yet, so I can't
add it to my store.
Is anyone in the process of taking inventory? If not I can grab another one
and do it.
|
|
Author: | Dimgo62 | Posted: | Sep 19, 2021 09:12 | Subject: | Question à propos d'une wanted list | Viewed: | 38 times | Topic: | Inventories | Status: | Open | |
|
| Bonjour,
je suis tout nouveau sur ce site donc je découvre petit à petit certaines choses.
Je désire sélectionner automatiquement les magasins pour ma wanted list uniquement
en France, pré-faites par un designer mais lorsque la liste des magasins apparaissent
ma commande est complète à 108%, soit 704/648 pièces. Quelqu'un pourrait
m'expliquer pourquoi ?
De plus, en sélectionnant ailleur qu'uniquement en France (Union Européenne
ou Anywhere) je n'ai pas ce problème.
Merci d'avance pour vos réponse !
|
|
|
Author: | Bendix | Posted: | Sep 18, 2021 03:11 | Subject: | Unreleased Scala set 3260 | Viewed: | 130 times | Topic: | Inventories | Status: | Open | |
|
| This set popped up in a Scala catalog 1998 but was likely never released.
I came across a lot of Scala parts of a former Lego employee out of Hohenwestedt,
including nearly all of these parts (some are glued together, so probably produced
for a display model). There`re parts in unreleased colors (like Light Yellow
beds and chairs and Light Salmon wicket baskets, parts with unknown stickers
and some completely unreleased like these tiles.
Is it possible to add them to the inventory of this set?
Thanks
Beryll
|
|
|
Author: | spacecaptain | Posted: | Sep 15, 2021 13:06 | Subject: | Remarks | Viewed: | 87 times | Topic: | Inventories | Status: | Open | |
|
| Hello. Is there a way to add multiple remarks like a series in brickstock?
Or do you have to enter each remark individually? Thank you!
|
Author: | dav69 | Posted: | Sep 15, 2021 02:08 | Subject: | Error on set 75319 mando | Viewed: | 85 times | Topic: | Inventories | Status: | Open | |
|
| Hi
I think it s error on 75319 set for
The mandalorian has a jetpack not a cape
David
|
|
Author: | dav69 | Posted: | Sep 15, 2021 02:01 | Subject: | Error on set 75319 mando | Viewed: | 56 times | Topic: | Inventories | Status: | Open | |
|
| Hi
I think it s error on 75319 set for
The mandalorian has a jetpack not a cape
David
|
|
Author: | momtomany | Posted: | Sep 14, 2021 16:30 | Subject: | Waiting for set 75315 inventory | Viewed: | 80 times | Topic: | Inventories | Status: | Open | |
|
| Anyone know how long it usually takes before a set inventory is in the catalogue?
This is the first time I've parted out a newer set and run into "Item Consists
Of: Inventory in Progress". I'd like to part out this set, but I can't
do it yet.
|
|
Author: | Dimi_DBB | Posted: | Sep 11, 2021 09:44 | Subject: | Extra item not included | Viewed: | 99 times | Topic: | Inventories | Status: | Open | |
|
| Hi,
I've opened 5 sealed sets (2021) of
In the inventory list, it says that there's 1 extra part of
But none of my sets has that part as an extra.
Does this need a note in the inventory saying that the extra part wasn't
found in sets from 2021?
Or not, since it's listed as an extra anyway?
I know extra's are not required, but in all the sealed sets I've parted
out in the last couple of years, the extra's were always there.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|