Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | axaday | Posted: | Jan 16, 2018 10:29 | Subject: | Re: ICR - Investigation Complete | Viewed: | 54 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, Admiral_Brick writes:
| Please make changes to the following inventory: [M=cty616]
* Change 1 Part Yellow {3626cpx302 Minifig, Head Male Angry Eyebrows and Scowl, White Pupils Pattern - Stud Recessed to 3626cpb1973 Minifig, Head Male Angry Eyebrows and Scowl, Reddish Brown Left Cheek Line Pattern - Stud Recessed}
|
Okay, I've checked every single set in which 3626cpx302 appears by set photos
and PCCs in instructions. The head is wrongly inventoried in 8 minifigures and
this is a result of the combination of two factors: (a) the poor-quality photo
for 3626cpx302 and (b) the incorrect assignment of a PCC to that part (and, of
course, inattention).
This head came in sets from 2012-2014 and had the PCC 4259916 (except in one
set, 850839, for which the PCC was 6044001):
There was a break in 2015, then this head appeared in sets from 2016-2018 and
had the PCC 6100217:
The heads don't really look that similar upon reasonably close examination
(see attached photos).
Since you first discovered this error, I invite you to submit the changes because
you deserve the credit. If you'd prefer me to make the changes directly,
then please let me know. The following changes need to be made:
First, this head needs to be inventoried in each of these figures:
[M=cty748]
[M=cty641]
[M=cty616]
[M=cty644]
[M=cty830]
[M=cty836]
Second, the PCC 6100217 needs to be removed from this head:
and applied to this head:
Finally, the photo for this head:
needs to be replaced with this photo:
I don't want to over-apologize, but I really did treat your requests poorly
and I hope you will resubmit them.
I'd like to publicly thank Russell for learning me how to do LEGO investigations
like this one. I also thank axaday for submitting the correct head to the catalog
(two years after it was first released!).
|
I thought it was strange that col309 would get a new head that wasn't more
special than that.
|
|
Author: | gvbricks | Posted: | Jan 16, 2018 10:16 | Subject: | Re: ICR - Investigation Complete | Viewed: | 59 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, Admiral_Brick writes:
| Please make changes to the following inventory: [M=cty616]
* Change 1 Part Yellow {3626cpx302 Minifig, Head Male Angry Eyebrows and Scowl, White Pupils Pattern - Stud Recessed to 3626cpb1973 Minifig, Head Male Angry Eyebrows and Scowl, Reddish Brown Left Cheek Line Pattern - Stud Recessed}
|
Okay, I've checked every single set in which 3626cpx302 appears by set photos
and PCCs in instructions. The head is wrongly inventoried in 8 minifigures and
this is a result of the combination of two factors: (a) the poor-quality photo
for 3626cpx302 and (b) the incorrect assignment of a PCC to that part (and, of
course, inattention).
This head came in sets from 2012-2014 and had the PCC 4259916 (except in one
set, 850839, for which the PCC was 6044001):
There was a break in 2015, then this head appeared in sets from 2016-2018 and
had the PCC 6100217:
The heads don't really look that similar upon reasonably close examination
(see attached photos).
Since you first discovered this error, I invite you to submit the changes because
you deserve the credit. If you'd prefer me to make the changes directly,
then please let me know. The following changes need to be made:
First, this head needs to be inventoried in each of these figures:
[M=cty748]
[M=cty641]
[M=cty616]
[M=cty644]
[M=cty830]
[M=cty836]
Second, the PCC 6100217 needs to be removed from this head:
and applied to this head:
Finally, the photo for this head:
needs to be replaced with this photo:
I don't want to over-apologize, but I really did treat your requests poorly
and I hope you will resubmit them.
I'd like to publicly thank Russell for learning me how to do LEGO investigations
like this one. I also thank axaday for submitting the correct head to the catalog
(two years after it was first released!).
|
No problem at all and no need for an apology. You summarized the changes very
well that need to be made.
I entered the change requests for the minifig inventories. I don't know how
to remove a PCC from a part - please do that for us.
I also cannot add the 3626bpx302 image to 3626cpx302 because the upload script
tells me that it is too small... Is there a larger version somewhere on the server?
Kind regards,
Matthias
|
|
Author: | gvbricks | Posted: | Jan 16, 2018 10:02 | Subject: | Inventory Change Request for Minifig cty836 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory: [M=cty836]
* Change 1 Part Yellow {3626cpx302 Minifig, Head Male Angry Eyebrows and Scowl, White Pupils Pattern - Stud Recessed to 3626cpb1973 Minifig, Head Male Angry Eyebrows and Scowl, Reddish Brown Left Cheek Line Pattern - Stud Recessed}
Comments from Submitter:
https://www.bricklink.com/message.asp?ID=1072043
|
|
Author: | gvbricks | Posted: | Jan 16, 2018 10:01 | Subject: | Inventory Change Request for Minifig cty830 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory: [M=cty830]
* Change 1 Part Yellow {3626cpx302 Minifig, Head Male Angry Eyebrows and Scowl, White Pupils Pattern - Stud Recessed to 3626cpb1973 Minifig, Head Male Angry Eyebrows and Scowl, Reddish Brown Left Cheek Line Pattern - Stud Recessed}
Comments from Submitter:
https://www.bricklink.com/message.asp?ID=1072043
|
|
Author: | gvbricks | Posted: | Jan 16, 2018 09:59 | Subject: | Inventory Change Request for Minifig cty748 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory: [M=cty748]
* Change 1 Part Yellow {3626cpx302 Minifig, Head Male Angry Eyebrows and Scowl, White Pupils Pattern - Stud Recessed to 3626cpb1973 Minifig, Head Male Angry Eyebrows and Scowl, Reddish Brown Left Cheek Line Pattern - Stud Recessed}
Comments from Submitter:
https://www.bricklink.com/message.asp?ID=1072043
|
|
Author: | gvbricks | Posted: | Jan 16, 2018 09:58 | Subject: | Inventory Change Request for Minifig cty641 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory: [M=cty641]
* Change 1 Part Yellow {3626cpx302 Minifig, Head Male Angry Eyebrows and Scowl, White Pupils Pattern - Stud Recessed to 3626cpb1973 Minifig, Head Male Angry Eyebrows and Scowl, Reddish Brown Left Cheek Line Pattern - Stud Recessed}
Comments from Submitter:
https://www.bricklink.com/message.asp?ID=1072043
|
|
Author: | gvbricks | Posted: | Jan 16, 2018 09:57 | Subject: | Inventory Change Request for Minifig sc018 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Yellow {3626cpx302 Minifig, Head Male Angry Eyebrows and Scowl, White Pupils Pattern - Stud Recessed to 3626cpb1973 Minifig, Head Male Angry Eyebrows and Scowl, Reddish Brown Left Cheek Line Pattern - Stud Recessed}
Comments from Submitter:
https://www.bricklink.com/message.asp?ID=1072043
|
|
Author: | gvbricks | Posted: | Jan 16, 2018 09:56 | Subject: | Inventory Change Request for Minifig cty616 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory: [M=cty616]
* Change 1 Part Yellow {3626cpx302 Minifig, Head Male Angry Eyebrows and Scowl, White Pupils Pattern - Stud Recessed to 3626cpb1973 Minifig, Head Male Angry Eyebrows and Scowl, Reddish Brown Left Cheek Line Pattern - Stud Recessed}
Comments from Submitter:
https://www.bricklink.com/message.asp?ID=1072043
|
|
Author: | gvbricks | Posted: | Jan 16, 2018 09:54 | Subject: | Inventory Change Request for Minifig cty644 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory: [M=cty644]
* Change 1 Part Yellow {3626cpx302 Minifig, Head Male Angry Eyebrows and Scowl, White Pupils Pattern - Stud Recessed to 3626cpb1973 Minifig, Head Male Angry Eyebrows and Scowl, Reddish Brown Left Cheek Line Pattern - Stud Recessed}
Comments from Submitter:
https://www.bricklink.com/message.asp?ID=1072043
|
|
Author: | gvbricks | Posted: | Jan 16, 2018 09:53 | Subject: | Inventory Change Request for Minifig jail006 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Yellow {3626cpx302 Minifig, Head Male Angry Eyebrows and Scowl, White Pupils Pattern - Stud Recessed to 3626cpb1973 Minifig, Head Male Angry Eyebrows and Scowl, Reddish Brown Left Cheek Line Pattern - Stud Recessed}
Comments from Submitter:
https://www.bricklink.com/message.asp?ID=1072043
|
|
Author: | StormChaser | Posted: | Jan 16, 2018 05:46 | Subject: | Re: Inventory Change Request for Set 2660-1 | Viewed: | 11 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| Additionally, there is a version of the set which includes a non-based bear
|
Just noticed there is also a lion cub not on a base. That is also now pending
approval.
|
|
Author: | StormChaser | Posted: | Jan 16, 2018 05:39 | Subject: | Re: Inventory Change Request for Set 2660-1 | Viewed: | 14 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| Did you ever consider how bizarre it is that we have only been able to record music for the last 150 years? For nearly the entirety of human history if you wanted to hear music it had to be performed live.
|
Based bear and non-based bear versions of set shown in attached images. Both
bear versions have round eyes.
|
|
|
Author: | StormChaser | Posted: | Jan 16, 2018 05:31 | Subject: | Inventory Change Request for Set 2660-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 2334c02pb03 White Duplo Polar Bear Cub on Blue Base, Squared Eyes
* Add 1 Part 2334c02pb01 White Duplo Polar Bear Cub on Blue Base, Round Eyes
Comments from Submitter:
Every photo I've seen of the set box and the set in catalogs shows the round-eyed bear. Additionally, there is a version of the set which includes a non-based bear (this bear is pending catalog approval right now).
|
|
Author: | StormChaser | Posted: | Jan 16, 2018 05:02 | Subject: | Re: Inventory Change Request for Set 2654-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
I was just kidding. There are only 7 people.
|
|
|
Author: | StormChaser | Posted: | Jan 16, 2018 05:01 | Subject: | Inventory Change Request for Set 2654-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3011 Blue Duplo, Brick 2 x 4
* Change {4 to 2} Part Blue 3437 Duplo, Brick 2 x 2
Comments from Submitter:
OMG, you guys have no idea what goes on behind the scenes here. Every inventory change request is looked over by a committee of 12 people (they're all dressed in black robes and hoods, so I have no idea who they are). We have a video conference and they consider the request and then sort of make sounds like hmmm and ahem and then they hand down a decision. And if I get it wrong, then they appoint someone to frown at me. It's quite dreadful, I tell you.
|
|
Author: | StormChaser | Posted: | Jan 16, 2018 04:27 | Subject: | Inventory Change Request for Set 2341-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Minifig dupfig005 Duplo 2 x 2 x 2 Figure Brick Early, Male on Blue Base, Red Hair, Freckles
* Add 1 Minifig 2327pb05 Duplo 2 x 2 x 2 Figure Brick, Blue Base with Suspenders, White Head with Freckles on Nose, Red Male Hair
|
|
Author: | StormChaser | Posted: | Jan 16, 2018 04:20 | Subject: | Re: Inventory Change Request for Set 2341-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
It's because of the impossibility of simultaneously knowing the speed and
position of a subatomic particle.
Pictures are poor quality, but good enough to determine the quantity/type of
parts.
|
|
|
Author: | StormChaser | Posted: | Jan 16, 2018 04:15 | Subject: | Inventory Change Request for Set 2341-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 4883c01 Red Duplo Car Base 2 x 6 with Yellow Wheels and Old Style Closed Hitch End
* Add 1 Part 2312c01 Red Duplo Car Base 2 x 6 with Yellow Wheels and Open Hitch End
* Change {4 to 3} Part Green 3437 Duplo, Brick 2 x 2
Comments from Submitter:
An electron is motoring down the freeway and is pulled over. The officer says, "Sir, you were going 90 MPH."
"Great," the electron says. "Now I'm lost."
|
|
|
Author: | StormChaser | Posted: | Jan 15, 2018 20:46 | Subject: | Inventory Change Request for Set 2785-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part blankie Medium Green Duplo Cloth Blanket 4 x 6 (8 x 12 Lego Studs)
* Change 1 Part {Pink to Dark Pink} 4066pb057 Duplo, Brick 1 x 2 x 2 with Fruit Bowl Pattern
Comments from Submitter:
Set clearly does not include two green cloths. Am deleting one of them - not sure which to delete, but it makes more sense to delete the blanket since the cloth is used as a rug.
The fruit bowl brick comes in dark pink in 4 sets and in pink in only one set (this one). BrickLink pictures of both colors look similar. I suggest the pink image is removed from BL. High-quality photos of the set here:
http://www.brickshelf.com/cgi-bin/gallery.cgi?f=298464
|
|
Author: | StormChaser | Posted: | Jan 15, 2018 19:31 | Subject: | Re: Inventory Change Request for Set 2668-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| A re-release around 1992 (or perhaps later)
|
The '92 catalog still shows the multi-tree. The '94 SAH catalog shows
the single tree and is where the alternate BL catalog image came from.
|
|
Author: | StormChaser | Posted: | Jan 15, 2018 18:40 | Subject: | Re: Inventory Change Request for Set 2668-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| | This one's a little complicated.
|
|
After further consideration, which always seems to do me good, I believe I have
figured out what's going on here. The original version included three tree
parts (these parts were only released in 1990-1991). A re-release around 1992
(or perhaps later) replaced three tree parts with the single trunk part, but
they never bothered to update the part count to 41 parts.
So what actually needs to happen is that the set needs to be corrected to how
it originally appeared (3 tree parts) and the single tree stump needs to be changed
to an alternate.
|
|
Author: | StormChaser | Posted: | Jan 15, 2018 18:25 | Subject: | Re: Inventory Change Request for Set 2668-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| Please make changes to the following inventory:
* Add 2 Part 2289 Brown Duplo Plant Tree Trunk Segment with Branches, Round (Alternate) (match ID 1)
* Add 1 Part 2288 Brown Duplo Plant Tree Trunk Segment with Branches, Conical (Alternate) (match ID 1)
* Change 1 Part Brown 6411 Duplo Plant Tree Trunk Segment Base {match ID 0 to 1}
Comments from Submitter:
This one's a little complicated.
|
So the part count for this set, even in the catalog photo of the set with the
single tree trunk, is 43. Problem is, the set with the single trunk doesn't
have 43 parts. Adding 2 parts tree trunk with branches and 1 part tree top with
branches and deleting the single trunk would get the part count to the
correct total of 43.
However, as I said, an official set photo exists from a catalog with the single
trunk (and the part count of 43). The single trunk first appears in this set
and it predates any other appearance by two years. I doubt the single trunk
ever came in this set, but it's possible.
I'm leaving the single trunk in, therefore, and adding the parts seen in
other versions of the set. I'm open, of course, to input on this.
|
|
|
Author: | StormChaser | Posted: | Jan 15, 2018 18:16 | Subject: | Inventory Change Request for Set 2668-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 2289 Brown Duplo Plant Tree Trunk Segment with Branches, Round (Alternate) (match ID 1)
* Add 1 Part 2288 Brown Duplo Plant Tree Trunk Segment with Branches, Conical (Alternate) (match ID 1)
* Change 1 Part Brown 6411 Duplo Plant Tree Trunk Segment Base {match ID 0 to 1}
Comments from Submitter:
This one's a little complicated. Avril once asked me why I made it thus, but I told her to stop blaming me for her inability to comprehend. She headed off to the studio and I've not spoken with her since.
|
|
Author: | WoutR | Posted: | Jan 15, 2018 17:16 | Subject: | Re: Inventory Change Request for Set 1874-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, StormChaser writes:
| Comments from Submitter:
Also, please add 3x [P=bawp302] in BA Black.
|
Not happening. Sorry.
For even suggesting it, I'm inclined to reject all your future inventory
change requests.
|
Ouch!
|
Author: | StormChaser | Posted: | Jan 15, 2018 16:59 | Subject: | Re: Inventory Change Request for Set 1874-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| Comments from Submitter:
Also, please add 3x [P=bawp302] in BA Black.
|
Not happening. Sorry.
For even suggesting it, I'm inclined to reject all your future inventory
change requests.
|
|
Author: | StormChaser | Posted: | Jan 15, 2018 16:55 | Subject: | Inventory Change Request for Set 1874-1 | Viewed: | 40 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 3003pe1 Yellow Brick 2 x 2 with Eye without White Pattern on Two Sides, Offset
* Add 2 Part 3003pe2 Yellow Brick 2 x 2 with Eye with White Pattern on Two Sides, Offset
Comments from Submitter:
Also, please add 3x [P=bawp302] in BA Black.
|
|
|
Author: | fors | Posted: | Jan 15, 2018 10:04 | Subject: | Re: Inventory Change Request for Set 8935-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, fors writes:
| Please make changes to the following inventory:
* Change 6 Part {Trans-Light Blue to Glow In Dark Opaque} 57560pb01 Bionicle Hydruka Back Plate (Morak), Marbled Glow In Dark Pattern
Comments from Submitter:
57560pb01 is listed in the catalogue with a base colour either as "Trans Light-Blue" or "Glow in the dark opaque" Looking at pictures of 8539 I am fairly certain that "Trans Light-Blue" is an error of original submitter.
See https://vignette.wikia.nocookie.net/bionicle/images/c/c3/Nocturn.png/revision/latest?cb=20130727013741
Too ease up on inventories I guess "Glow in dark opaque" could be listed as alternate item
|
Also this image which clearly shows glow in the dark parts. I will submit a few
more changes if this one comes through.
|
|
|
Author: | fors | Posted: | Jan 15, 2018 09:55 | Subject: | Inventory Change Request for Set 8935-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 6 Part {Trans-Light Blue to Glow In Dark Opaque} 57560pb01 Bionicle Hydruka Back Plate (Morak), Marbled Glow In Dark Pattern
Comments from Submitter:
57560pb01 is listed in the catalogue with a base colour either as "Trans Light-Blue" or "Glow in the dark opaque" Looking at pictures of 8539 I am fairly certain that "Trans Light-Blue" is an error of original submitter.
See https://vignette.wikia.nocookie.net/bionicle/images/c/c3/Nocturn.png/revision/latest?cb=20130727013741
Too ease up on inventories I guess "Glow in dark opaque" could be listed as alternate item
|
|
Author: | cjbenson | Posted: | Jan 15, 2018 08:09 | Subject: | Re: Weight/cart restrictions suggestion | Viewed: | 28 times | Topic: | Suggestions | |
|
| That is a good point. Perhaps, it should be disabled initially with the option
to allow it to be enabled even if one isn't using auto checkout. Otherwise
there will just be a lot of headaches and unnecessary delays.
In Suggestions, NelisSolis writes:
| In Suggestions, cjbenson writes:
| I can understand the need to have a bypass password for some orders BUT I can
see it only being useful if the store(s) in question are using instant checkout.
Why not turn off the need for a bypass password for any stores that are not using
instant checkout since they are going to need to manually send an invoice/calculate
shipping anyways. It would help reduce the restriction errors buy quite a bit
and help sellers by not making them wonder why their sales have dropped off suddenly.
|
In my opinion the feature of the bypass password is to allow a seller some buyers
(selected and approved by the seller) to place an order although they don't
meet store terms. Since every store has its own reasons for having certain terms,
I don't think it is a good idea to just disable all the configurable store
terms. Sellers use these to set up a store that is manageable in their environment
(private life, other job, easy access to shipping, etc).
However, I DO think a lot of sellers are not fully aware of the consequences
of their store settings, resulting in the lower sales and/or frustrated buyers.
As a buyer I think it is always possible (if seller allows contact) to ask for
a bypass password if an order doesn't comply with store terms.
|
|
|
Author: | cjbenson | Posted: | Jan 15, 2018 08:06 | Subject: | Re: Weight/cart restrictions suggestion | Viewed: | 20 times | Topic: | Suggestions | |
|
| I think it is happening all over the place actually.
In Suggestions, Brickwilbo writes:
| In Suggestions, cjbenson writes:
| I can understand the need to have a bypass password for some orders BUT I can
see it only being useful if the store(s) in question are using instant checkout.
Why not turn off the need for a bypass password for any stores that are not using
instant checkout since they are going to need to manually send an invoice/calculate
shipping anyways. It would help reduce the restriction errors buy quite a bit
and help sellers by not making them wonder why their sales have dropped off suddenly.
|
I thought the restriction errors are only occurring in stores with instant checkout
and/or instant invoice enabled.
|
|
|
Author: | StormChaser | Posted: | Jan 15, 2018 05:25 | Subject: | Re: ICR - Investigation Complete | Viewed: | 64 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Admiral_Brick writes:
| Please make changes to the following inventory: [M=cty616]
* Change 1 Part Yellow {3626cpx302 Minifig, Head Male Angry Eyebrows and Scowl, White Pupils Pattern - Stud Recessed to 3626cpb1973 Minifig, Head Male Angry Eyebrows and Scowl, Reddish Brown Left Cheek Line Pattern - Stud Recessed}
|
Okay, I've checked every single set in which 3626cpx302 appears by set photos
and PCCs in instructions. The head is wrongly inventoried in 8 minifigures and
this is a result of the combination of two factors: (a) the poor-quality photo
for 3626cpx302 and (b) the incorrect assignment of a PCC to that part (and, of
course, inattention).
This head came in sets from 2012-2014 and had the PCC 4259916 (except in one
set, 850839, for which the PCC was 6044001):
There was a break in 2015, then this head appeared in sets from 2016-2018 and
had the PCC 6100217:
The heads don't really look that similar upon reasonably close examination
(see attached photos).
Since you first discovered this error, I invite you to submit the changes because
you deserve the credit. If you'd prefer me to make the changes directly,
then please let me know. The following changes need to be made:
First, this head needs to be inventoried in each of these figures:
[M=cty748]
[M=cty641]
[M=cty616]
[M=cty644]
[M=cty830]
[M=cty836]
Second, the PCC 6100217 needs to be removed from this head:
and applied to this head:
Finally, the photo for this head:
needs to be replaced with this photo:
I don't want to over-apologize, but I really did treat your requests poorly
and I hope you will resubmit them.
I'd like to publicly thank Russell for learning me how to do LEGO investigations
like this one. I also thank axaday for submitting the correct head to the catalog
(two years after it was first released!).
|
|
|
Author: | Brickwilbo | Posted: | Jan 15, 2018 04:31 | Subject: | Re: Weight/cart restrictions suggestion | Viewed: | 21 times | Topic: | Suggestions | |
|
| In Suggestions, cjbenson writes:
| I can understand the need to have a bypass password for some orders BUT I can
see it only being useful if the store(s) in question are using instant checkout.
Why not turn off the need for a bypass password for any stores that are not using
instant checkout since they are going to need to manually send an invoice/calculate
shipping anyways. It would help reduce the restriction errors buy quite a bit
and help sellers by not making them wonder why their sales have dropped off suddenly.
|
I thought the restriction errors are only occurring in stores with instant checkout
and/or instant invoice enabled.
|
|
Author: | StormChaser | Posted: | Jan 15, 2018 03:17 | Subject: | Re: Inventory Change Request for Minifig cty616 | Viewed: | 32 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Admiral_Brick writes:
| Please make changes to the following inventory: [M=cty616]
* Change 1 Part Yellow {3626cpx302 Minifig, Head Male Angry Eyebrows and Scowl, White Pupils Pattern - Stud Recessed to 3626cpb1973 Minifig, Head Male Angry Eyebrows and Scowl, Reddish Brown Left Cheek Line Pattern - Stud Recessed}
|
I am now looking into every set in which this figure appears in an attempt to
sort out the errors. This could take a little time.
|
|
Author: | NelisSolis | Posted: | Jan 15, 2018 03:00 | Subject: | Re: Weight/cart restrictions suggestion | Viewed: | 22 times | Topic: | Suggestions | |
|
| In Suggestions, cjbenson writes:
| I can understand the need to have a bypass password for some orders BUT I can
see it only being useful if the store(s) in question are using instant checkout.
Why not turn off the need for a bypass password for any stores that are not using
instant checkout since they are going to need to manually send an invoice/calculate
shipping anyways. It would help reduce the restriction errors buy quite a bit
and help sellers by not making them wonder why their sales have dropped off suddenly.
|
In my opinion the feature of the bypass password is to allow a seller some buyers
(selected and approved by the seller) to place an order although they don't
meet store terms. Since every store has its own reasons for having certain terms,
I don't think it is a good idea to just disable all the configurable store
terms. Sellers use these to set up a store that is manageable in their environment
(private life, other job, easy access to shipping, etc).
However, I DO think a lot of sellers are not fully aware of the consequences
of their store settings, resulting in the lower sales and/or frustrated buyers.
As a buyer I think it is always possible (if seller allows contact) to ask for
a bypass password if an order doesn't comply with store terms.
|
|
Author: | StormChaser | Posted: | Jan 15, 2018 02:56 | Subject: | Re: Inventory Change Request for Minifig cty616 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| BTW, it appears I inventoried the wrong head in this recent figure:
[M=cty836]
|
Okay, I rechecked the set instructions to verify and TLG definitely uses the
PCC 6100217 for the reddish brown color lined head (which is what led me astray
in the first place with this figure).
It is possible that it was never used for the black lined head . . . someone
will need to go back and check through the instructions for the sets in which
the two versions of the head appears to make sure.
|
|
Author: | StormChaser | Posted: | Jan 15, 2018 02:47 | Subject: | Re: Inventory Change Request for Minifig cty616 | Viewed: | 26 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Admiral_Brick writes:
| Ok, you can see it on the pictures of all newer minifigs (except the one with
a helmet) with head 3626cpx302 that this head in the inventories is wrong (brown
vs. black cheek lines).
|
I have done you a disservice by rejecting your requests so quickly and I apologize.
I was confused about what was going on with this head. I looked at the PCC
for set
and it matched the PCC of the head inventoried in the figure.
This appears to be a mildly tangled issue which likely involves the PCCs, so
nice catch on your part. Submit whatever requests necessary to get it straightened
out and I apologize again.
This picture definitely needs to be replaced:
BTW, it appears I inventoried the wrong head in this recent figure:
[M=cty836]
|
|
Author: | gvbricks | Posted: | Jan 15, 2018 02:35 | Subject: | Re: Inventory Change Request for Minifig cty616 | Viewed: | 35 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, Admiral_Brick writes:
| Please make changes to the following inventory: [M=cty616]
* Change 1 Part Yellow {3626cpx302 Minifig, Head Male Angry Eyebrows and Scowl, White Pupils Pattern - Stud Recessed to 3626cpb1973 Minifig, Head Male Angry Eyebrows and Scowl, Reddish Brown Left Cheek Line Pattern - Stud Recessed}
|
Please don't submit any more similar requests. I have alerted the catalog
administrators that these heads may be the same.
|
Ok, you can see it on the pictures of all newer minifigs (except the one with
a helmet) with head 3626cpx302 that this head in the inventories is wrong (brown
vs. black cheek lines).
|
|
Author: | StormChaser | Posted: | Jan 15, 2018 02:34 | Subject: | Re: Inventory Change Request for Minifig jail006 | Viewed: | 21 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Admiral_Brick writes:
| Please make changes to the following inventory:
* Change 1 Part Yellow {3626cpx302 Minifig, Head Male Angry Eyebrows and Scowl, White Pupils Pattern - Stud Recessed to 3626cpb1973 Minifig, Head Male Angry Eyebrows and Scowl, Reddish Brown Left Cheek Line Pattern - Stud Recessed}
|
Please see this message:
https://www.bricklink.com/message.asp?ID=1072023
|
|
Author: | gvbricks | Posted: | Jan 15, 2018 02:31 | Subject: | Inventory Change Request for Minifig jail006 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Yellow {3626cpx302 Minifig, Head Male Angry Eyebrows and Scowl, White Pupils Pattern - Stud Recessed to 3626cpb1973 Minifig, Head Male Angry Eyebrows and Scowl, Reddish Brown Left Cheek Line Pattern - Stud Recessed}
|
|
Author: | StormChaser | Posted: | Jan 15, 2018 02:31 | Subject: | Re: Inventory Change Request for Minifig cty616 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Admiral_Brick writes:
| Please make changes to the following inventory: [M=cty616]
* Change 1 Part Yellow {3626cpx302 Minifig, Head Male Angry Eyebrows and Scowl, White Pupils Pattern - Stud Recessed to 3626cpb1973 Minifig, Head Male Angry Eyebrows and Scowl, Reddish Brown Left Cheek Line Pattern - Stud Recessed}
|
Please don't submit any more similar requests. I have alerted the catalog
administrators that these heads may be the same.
|
|
Author: | StormChaser | Posted: | Jan 15, 2018 02:30 | Subject: | Re: Inventory Change Request for Minifig cty641 | Viewed: | 16 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Admiral_Brick writes:
| Please make changes to the following inventory: [M=cty641]
* Change 1 Part Yellow {3626cpx302 Minifig, Head Male Angry Eyebrows and Scowl, White Pupils Pattern - Stud Recessed to 3626cpb1973 Minifig, Head Male Angry Eyebrows and Scowl, Reddish Brown Left Cheek Line Pattern - Stud Recessed}
|
Well, that's a unique way of alerting us to a possible duplicate entry.
I've alerted the catalog administrators.
|
|
Author: | gvbricks | Posted: | Jan 15, 2018 02:30 | Subject: | Inventory Change Request for Minifig cty616 | Viewed: | 67 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory: [M=cty616]
* Change 1 Part Yellow {3626cpx302 Minifig, Head Male Angry Eyebrows and Scowl, White Pupils Pattern - Stud Recessed to 3626cpb1973 Minifig, Head Male Angry Eyebrows and Scowl, Reddish Brown Left Cheek Line Pattern - Stud Recessed}
|
Author: | sharon12 | Posted: | Jan 15, 2018 02:29 | Subject: | Re: Add Cond,Item# to Sort Order received items | Viewed: | 20 times | Topic: | Suggestions | |
|
| Sort by Condition ~ item name ~ color name ~ comments. We find that the most
helpful in our store it may work for you. Sharon.
|
Author: | gvbricks | Posted: | Jan 15, 2018 02:21 | Subject: | Inventory Change Request for Minifig cty641 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory: [M=cty641]
* Change 1 Part Yellow {3626cpx302 Minifig, Head Male Angry Eyebrows and Scowl, White Pupils Pattern - Stud Recessed to 3626cpb1973 Minifig, Head Male Angry Eyebrows and Scowl, Reddish Brown Left Cheek Line Pattern - Stud Recessed}
|
|
Author: | cjbenson | Posted: | Jan 14, 2018 23:40 | Subject: | Weight/cart restrictions suggestion | Viewed: | 82 times | Topic: | Suggestions | Status: | Discarded | |
|
| I can understand the need to have a bypass password for some orders BUT I can
see it only being useful if the store(s) in question are using instant checkout.
Why not turn off the need for a bypass password for any stores that are not using
instant checkout since they are going to need to manually send an invoice/calculate
shipping anyways. It would help reduce the restriction errors buy quite a bit
and help sellers by not making them wonder why their sales have dropped off suddenly.
|
|
Author: | gvbricks | Posted: | Jan 14, 2018 22:40 | Subject: | Inventory Change Request for Set 7238-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3747b Red Slope, Inverted 33 3 x 2 with Connections between Studs (Alternate) (match ID 2)
* Change 1 Part Red 3747a Slope, Inverted 33 3 x 2 without Connections between Studs {match ID 0 to 2}
|
|
Author: | relhak | Posted: | Jan 14, 2018 21:10 | Subject: | Re: Different minimum purchase for international | Viewed: | 23 times | Topic: | Suggestions | |
|
| Thanks for the suggestion, and it's helped a little to slow people down.
But it's only enforced for that shipping method. It's not like the
master setting where they're notified that they haven't reached the minimum,
and blocked from checking out. And it doesn't stop people from checking
out via manual invoicing.
In Suggestions, Brickwilbo writes:
| In Suggestions, relhak writes:
| Could we *please* be allowed a different minimum purchase setting for international
orders? Maybe even different lot limits
|
You can with the new instant checkout shipping settings.
| I don't mind small orders ($2+) in the USA, but international orders are
such a pain that I dread anything under $40. Now the customs forms are a minor
hassle, but buyers often don't understand English well, are annoyed at me
over the sky-high USPS rates (as if I can change them), and if I make a mistake
and have to ship a missing part, it costs a fortune.
I don't want to shut off international sales altogether because international
resellers place orders I love. But orders where the postage costs more than
the parts just aren't worth it.
|
|
|
|
Author: | PurpleDave | Posted: | Jan 14, 2018 21:00 | Subject: | Re: Add option to Exclude Paypal for EU | Viewed: | 34 times | Topic: | Suggestions | |
|
| In Suggestions, Teup writes:
| However, I ship without tracking all the time and accept PayPal payments. In
reality it's really no big deal. I've never once had a malicious buyer.
It seems like a far fetched and inefficient way to make money, going through
all the negativity of arguing with the seller, claiming through PayPal.. no person
- decent or otherwise - will be interested in that hassle, unless the order
is valuable. But in this case you would likely ship it with tracking anyway,
and the relative cost of the tracking would be much less.
|
I know someone who got scammed, once, in a way that tracking probably wouldn't
prevent. It was for a set, and I suspect those are more likely to be targeted
by scam buyers because they're easier to flip afterwards. I heard someone
ask advice on whether to sell sets or parts at an AFOL event, and the response
was that parts are more profitable, but sets will always sell. Now, I just peeked
in both of your stores, and while you have a much higher part to set ratio, his
sets are only about half a case of CMFs from a couple years ago. I didn't
browse his parts, but the account is only two years old, and the store has only
34 sales. Either this seller has actually been hit with a scam already, or it's
just a case of being new-seller cautious.
|
|
Author: | Teup | Posted: | Jan 14, 2018 20:08 | Subject: | Re: Add option to Exclude Paypal for EU | Viewed: | 35 times | Topic: | Suggestions | |
|
| In Suggestions, rjenkinsgb writes:
| In Suggestions, BrickSwede writes:
| In Suggestions, Murky writes:
| | Nice amount.
Would you prefer to get this order paid by IBAN or Paypal?
|
Going on a limb here, but I suspect most sellers that have access to IBAN will
prefer that. It saves them the PayPal fee, and the buyer is left with zero buyers
protection.
Since it is a direct-to-an-account transfer, no VISA, MASTERCARD or any other
credit card protection will help either.
While a seller should be able to choose payment options, PayPal should always
be one of them.
|
well the problem with Paypal is also its Buyer Protection, its way to easy to
abuse...
1/ place order
2/ choose non-tracable shipping
3/ recieve goods
4/ claim goods was never shipped
if there was a way on bricklink to automatically choose shipping based on payment
method it wouyld be great. I dont mind being paid via Paypal but you´ll have
to pay the €20 tracing fee on top of that €10 shipping...
|
It's not buyer protection that is being abused, exactly.
Under many countries laws (and international trade laws) a seller is responsible
for ensuring goods get to the buyer.
It makes no difference if a buyer opts for insurance, they are entitled to replacement
goods or a refund if something goes missing or is damaged in transit.
I never send anything that costs more than the postage without using insured
and signed-for services; only ever had one item damaged but it was over £600,
refunded by the carrier..
To be safe, allow for tracking & insurance in your shipping costs if you don't
want to bear the risk.
ps. There is no way I would use an international bank payment for a small purchase,
as the fees from the UK to somewhere using a different current are extortionate.
|
Read the post you replied to again - tracking is too expensive. BrickSwede was
saying he wants either PayPal+tracking or neither, because of a risk of false
accusation. In practise, this would usually boil down to neither, since tracking
usually adds some €10 to the shipping cost.
However, I ship without tracking all the time and accept PayPal payments. In
reality it's really no big deal. I've never once had a malicious buyer.
It seems like a far fetched and inefficient way to make money, going through
all the negativity of arguing with the seller, claiming through PayPal.. no person
- decent or otherwise - will be interested in that hassle, unless the order
is valuable. But in this case you would likely ship it with tracking anyway,
and the relative cost of the tracking would be much less.
|
|
Author: | bb1047715 | Posted: | Jan 14, 2018 18:38 | Subject: | Re: Add option to Exclude Paypal for EU | Viewed: | 31 times | Topic: | Suggestions | |
|
| In Suggestions, BrickSwede writes:
| In Suggestions, Murky writes:
| | Nice amount.
Would you prefer to get this order paid by IBAN or Paypal?
|
Going on a limb here, but I suspect most sellers that have access to IBAN will
prefer that. It saves them the PayPal fee, and the buyer is left with zero buyers
protection.
Since it is a direct-to-an-account transfer, no VISA, MASTERCARD or any other
credit card protection will help either.
While a seller should be able to choose payment options, PayPal should always
be one of them.
|
well the problem with Paypal is also its Buyer Protection, its way to easy to
abuse...
1/ place order
2/ choose non-tracable shipping
3/ recieve goods
4/ claim goods was never shipped
if there was a way on bricklink to automatically choose shipping based on payment
method it wouyld be great. I dont mind being paid via Paypal but you´ll have
to pay the €20 tracing fee on top of that €10 shipping...
|
It's not buyer protection that is being abused, exactly.
Under many countries laws (and international trade laws) a seller is responsible
for ensuring goods get to the buyer.
It makes no difference if a buyer opts for insurance, they are entitled to replacement
goods or a refund if something goes missing or is damaged in transit.
I never send anything that costs more than the postage without using insured
and signed-for services; only ever had one item damaged but it was over £600,
refunded by the carrier..
To be safe, allow for tracking & insurance in your shipping costs if you don't
want to bear the risk.
ps. There is no way I would use an international bank payment for a small purchase,
as the fees from the UK to somewhere using a different current are extortionate.
|
|
Author: | DoMT | Posted: | Jan 14, 2018 16:51 | Subject: | Add Cond,Item# to Sort Order received items | Viewed: | 615 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| In My Order Settings - Order Details Settings, it would be useful to be able
to sort order received items by:
Condition, Item No, Color name
This would make pulling an order a lot easier in our case as inventory is separated
by condition and then organized by item number.
|
Author: | Admin_Jaclyn | Posted: | Jan 14, 2018 02:43 | Subject: | Inventory Change Request for Set 31058-1 | Viewed: | 37 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4073 Trans-Orange Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
http://i64.tinypic.com/14bt10l.jpg
|
|
Author: | bb53904 | Posted: | Jan 13, 2018 18:48 | Subject: | Re: Inventory Change Request for Set 41184-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, Klosseriet writes:
| Please make changes to the following inventory:
* Delete 1 Part 4032 White Plate, Round 2 x 2 with Axle Hole (Extra)
* Delete 1 Part 23989 White Dragon Wing 13 x 8 (Extra)
Comments from Submitter:
Verified with two sets.
|
Extra parts can vary by market/region and are not guaranteed to be in every set
- that's why they're in the Extra parts section. I'm sorry that
your two sets did not have these extras, but someone else's set did include
them. These requests will not be approved.
|
I also just built this set and made a change note at Rebrickable. My set had
the extra Dragon Wing, but not the Round Plate.
Thea
Always An Adventure!
|
|
Author: | StormChaser | Posted: | Jan 13, 2018 15:51 | Subject: | Re: Inventory Change Request for Set 7877-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, phyllisw8 writes:
| Please make changes to the following inventory:
* Add 1 Part 41747pb035 Yellow Yellow Wedge 6 x 2 Right with Red Swoosh Pattern (Sticker) (Counterpart)
* Add 1 Part 41748pb035 Yellow Yellow Wedge 6 x 2 Left with Red Swoosh Pattern (Sticker) (Counterpart)
Comments from Submitter:
The red swoosh stickers on the 7877-1 sticker sheet are not accounted for in the counterparts section of the set inventory.
|
The stickers are applied differently for this set and, therefore, I cannot approve
these requests. The attached photos show first set 7877 and then set 75092.
You can see that the hook on the swoosh faces different directions.
The new stickered counterparts need to be added to the catalog first if you want
to add them to this set.
|
|
|
Author: | StormChaser | Posted: | Jan 13, 2018 13:56 | Subject: | Re: Inventory Change Request for Set 41184-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Klosseriet writes:
| Please make changes to the following inventory:
* Delete 1 Part 4032 White Plate, Round 2 x 2 with Axle Hole (Extra)
* Delete 1 Part 23989 White Dragon Wing 13 x 8 (Extra)
Comments from Submitter:
Verified with two sets.
|
Extra parts can vary by market/region and are not guaranteed to be in every set
- that's why they're in the Extra parts section. I'm sorry that
your two sets did not have these extras, but someone else's set did include
them. These requests will not be approved.
|
|
Author: | zaprice | Posted: | Jan 13, 2018 11:53 | Subject: | Re: Show % of positive feedback in item | Viewed: | 20 times | Topic: | Suggestions | |
|
| Thanks for the feedback on the suggestion, I am most interested in seeing the
feedback percentage immediately. Colors was just a added bonus to the suggestion.
|
Author: | Rewind0174 | Posted: | Jan 13, 2018 10:38 | Subject: | Inventory Change Request for Set 60166-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {2584c002 String Reel 2 x 2 Complete without String with Light Gray Drum to 2584c003 String Reel 2 x 2 Complete without String with Light Bluish Gray Drum} {Counterpart to Regular}
|
|
Author: | popsicle | Posted: | Jan 13, 2018 10:07 | Subject: | Re: Show % of positive feedback in item | Viewed: | 49 times | Topic: | Suggestions | |
|
| In Suggestions, zaprice writes:
| Instead or addition to showing the colored brick, Show the percent of positive
feedback in the item listing so I don't have to go to the store and look
at is there.
Here is an example, my numbers are random and not the persons actual feedback.
I even put the feedback that is less than 100% in red as a warning.
Which by the way, I don't understand the point of the colored brick, yes
I understand it relates to the amount of feedback but I can see that one persons
feedback is large and one is smaller.
|
The idea of quickly knowing the seller's feedback while shopping the part,
may have some merit, I'm undecided on that. But anything less than 100% in
the warning color of red, I don't feel is right. I know so many fantastic
BL sellers with less than 100% that I've spent large sums of money with over
the years, it just wouldn't be fair to them. In fact, I'm of the crowd
(very small crowd ) that feel that too much emphasis is put on a member's
feedback rating.
But keep the ideas coming. There's always way to better the site.
-Cory
|
|
Author: | zaprice | Posted: | Jan 13, 2018 08:46 | Subject: | Show % of positive feedback in item | Viewed: | 86 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Instead or addition to showing the colored brick, Show the percent of positive
feedback in the item listing so I don't have to go to the store and look
at is there.
Here is an example, my numbers are random and not the persons actual feedback.
I even put the feedback that is less than 100% in red as a warning.
Which by the way, I don't understand the point of the colored brick, yes
I understand it relates to the amount of feedback but I can see that one persons
feedback is large and one is smaller.
Thanks,
Zack
|
|
|
Author: | Klosseriet | Posted: | Jan 13, 2018 06:57 | Subject: | Inventory Change Request for Set 41184-1 | Viewed: | 36 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 4032 White Plate, Round 2 x 2 with Axle Hole (Extra)
* Delete 1 Part 23989 White Dragon Wing 13 x 8 (Extra)
Comments from Submitter:
Verified with two sets.
|
|
Author: | StormChaser | Posted: | Jan 12, 2018 14:35 | Subject: | Re: Inventory Change Request for Set 8017-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, neilson031 writes:
| Please make changes to the following inventory:
* Delete 2 Part 32000 Tan Technic, Brick 1 x 2 with Holes (match ID 2)
Comments from Submitter:
If you go to the inventory page in the back of the intructions, these two pieces are not included.
|
As normann1974 pointed out, there are two different versions of this set. The
version of the instructions you are referencing does not include these two pieces,
but the other version does. Therefore, this request was not approved.
|
|
Author: | normann1974 | Posted: | Jan 12, 2018 11:29 | Subject: | Re: Inventory Change Request for Set 8671-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, normann1974 writes:
| Please make changes to the following inventory:
* Change 4 Part Tan {3044 Slope 45 2 x 1 Double - Undetermined Underside to 3044b Slope 45 2 x 1 Double - with Inside Bar}
Comments from Submitter:
My set has this variant.
|
|
|
|
Author: | normann1974 | Posted: | Jan 12, 2018 11:29 | Subject: | Inventory Change Request for Set 8671-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Tan {3044 Slope 45 2 x 1 Double - Undetermined Underside to 3044b Slope 45 2 x 1 Double - with Inside Bar}
Comments from Submitter:
My set has this variant.
|
|
Author: | Mihail | Posted: | Jan 12, 2018 11:29 | Subject: | Inventory Change Request for Set 42069-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 5 Part {Flat Silver to Metallic Silver} 62462 Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)
Comments from Submitter:
I opened 2 sets and both of them came with Metallic Silver 62462 parts not flat silver.
|
|
Author: | normann1974 | Posted: | Jan 12, 2018 07:52 | Subject: | Re: Inventory Change Request for Set 8017-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, neilson031 writes:
| Please make changes to the following inventory:
* Delete 2 Part 32000 Tan Technic, Brick 1 x 2 with Holes (match ID 2)
Comments from Submitter:
If you go to the inventory page in the back of the intructions, these two pieces are not included.
|
If you read the inventory note, it says: "Two versions of this set exist with
different printed instructions. The changes are noted as Match ID 2."
|
|
Author: | bb55170 | Posted: | Jan 11, 2018 23:48 | Subject: | Inventory Change Request for Set 8017-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 32000 Tan Technic, Brick 1 x 2 with Holes (match ID 2)
Comments from Submitter:
If you go to the inventory page in the back of the intructions, these two pieces are not included.
|
|
Author: | A.Lukinov | Posted: | Jan 11, 2018 23:32 | Subject: | Inventory Change Request for Set 42029-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 64394pb013 Red Technic, Panel Fairing #13 Large Short Smooth, Side A with White Stripe, Roaring Bear and Door Handle Pattern (Sticker) - Set 42029 (Counterpart)
|
Author: | A.Lukinov | Posted: | Jan 11, 2018 23:32 | Subject: | Inventory Change Request for Set 42029-1 | Viewed: | 5 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 64680pb013 Red Technic, Panel Fairing #14 Large Short Smooth, Side B with White Stripe, Roaring Bear and Door Handle Pattern (Sticker) - Set 42029 (Counterpart)
|
Author: | A.Lukinov | Posted: | Jan 11, 2018 23:31 | Subject: | Inventory Change Request for Set 42029-1 | Viewed: | 8 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 15458pb006 Red Technic, Panel Plate 3 x 11 x 1 with White Stripe, Roaring Bear and Scratches Pattern (Sticker) - Set 42029 (Counterpart)
|
Author: | A.Lukinov | Posted: | Jan 11, 2018 23:30 | Subject: | Inventory Change Request for Set 9398-1 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 64394pb011 Black Technic, Panel Fairing #13 Large Short Smooth, Side A with Door Handle and Black and Orange Rhombuses Pattern (Sticker) - Set 9398 (Counterpart)
|
Author: | A.Lukinov | Posted: | Jan 11, 2018 23:29 | Subject: | Inventory Change Request for Set 9398-1 | Viewed: | 6 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 64394pb012 Black Technic, Panel Fairing #13 Large Short Smooth, Side A with White and Orange Rhombuses and '4X4' Pattern (Sticker) - Set 9398 (Counterpart)
|
Author: | A.Lukinov | Posted: | Jan 11, 2018 23:28 | Subject: | Inventory Change Request for Set 9398-1 | Viewed: | 7 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 64680pb011 Black Technic, Panel Fairing #14 Large Short Smooth, Side B with Door Handle and Black and Orange Rhombuses Pattern (Sticker) - Set 9398 (Counterpart)
|
Author: | A.Lukinov | Posted: | Jan 11, 2018 23:28 | Subject: | Inventory Change Request for Set 9398-1 | Viewed: | 5 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 64680pb012 Black Technic, Panel Fairing #14 Large Short Smooth, Side B with White and Orange Rhombuses Pattern (Sticker) - Set 9398 (Counterpart)
|
Author: | A.Lukinov | Posted: | Jan 11, 2018 23:27 | Subject: | Inventory Change Request for Set 9398-1 | Viewed: | 6 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 64392pb019 Black Technic, Panel Fairing #17 Large Smooth, Side B with White and Orange Rhombuses Pattern (Sticker) - Set 9398 (Counterpart)
|
Author: | A.Lukinov | Posted: | Jan 11, 2018 23:26 | Subject: | Inventory Change Request for Set 9398-1 | Viewed: | 7 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 64682pb019 Black Technic, Panel Fairing #18 Large Smooth, Side B with White and Orange Rhombuses Pattern (Sticker) - Set 9398 (Counterpart)
|
Author: | A.Lukinov | Posted: | Jan 11, 2018 23:26 | Subject: | Inventory Change Request for Set 9398-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 64782pb019 Black Technic, Panel Plate 5 x 11 x 1 with 2 Orange Stripes with Corner Cutouts Pattern (Sticker) - Set 9398 (Counterpart)
|
|
Author: | PurpleDave | Posted: | Jan 11, 2018 19:18 | Subject: | Re: Add option to Exclude Paypal for EU | Viewed: | 32 times | Topic: | Suggestions | |
|
| In Suggestions, SylvainLS writes:
| Anyway I don’t very much like the “I want to block buyers who could pay the way
I want but won’t” attitude, I’d rather see a “I give perks to buyers who pay
the way I prefer.” But I guess it’s because I’m a buyer
|
I don't really have to worry about that, since anyone who wants US buyers
pretty much has to offer Paypal. But what I miss now is the feature that I very
briefly was able to enjoy, where I could search by stores that accepted _regular_
Paypal. The last time I tried to use that, all I could select was "Instant Checkout",
which just compounds the problem of Onsite Paypal. I don't load Bricklink
on the computer I use to do financial stuff, and I don't do financial stuff
on the various devices I use to shop Bricklink. Kinda hard to make either of
those work under those circumstances.
|
|
Author: | SylvainLS | Posted: | Jan 11, 2018 15:44 | Subject: | Re: Add option to Exclude Paypal for EU | Viewed: | 39 times | Topic: | Suggestions | |
|
| In Suggestions, Teup writes:
| Long story short after all this SEPA, IBAN, Euro zone, Europe etc discussion:
Simply allow sellers to set up zones for payment methods the same way they set
up zones for shipping methods […]
|
As already said, it’s not a zone problem, it’s a currency problem.
If you (as a seller) make a list of EUR using countries, you’ll block UK (for
instance) buyers with a bank account in Euro who wouldn’t have any problem with
SEPA bank transfers.
On the other hand, if you make a list of SEPA countries (so including UK), you’ll
bother buyers (like yorbrick) who can’t or don’t want to make bank transfers
in EUR.
What you want is a “buyer can/wish to pay in EUR inside SEPA” which is different
from “buyer is in a SEPA country.”
Anyway I don’t very much like the “I want to block buyers who could pay the way
I want but won’t” attitude, I’d rather see a “I give perks to buyers who pay
the way I prefer.” But I guess it’s because I’m a buyer
|
|
Author: | BrickSwede | Posted: | Jan 11, 2018 15:32 | Subject: | Re: Add option to Exclude Paypal for EU | Viewed: | 36 times | Topic: | Suggestions | |
|
| In Suggestions, Murky writes:
| | Nice amount.
Would you prefer to get this order paid by IBAN or Paypal?
|
Going on a limb here, but I suspect most sellers that have access to IBAN will
prefer that. It saves them the PayPal fee, and the buyer is left with zero buyers
protection.
Since it is a direct-to-an-account transfer, no VISA, MASTERCARD or any other
credit card protection will help either.
While a seller should be able to choose payment options, PayPal should always
be one of them.
|
well the problem with Paypal is also its Buyer Protection, its way to easy to
abuse...
1/ place order
2/ choose non-tracable shipping
3/ recieve goods
4/ claim goods was never shipped
if there was a way on bricklink to automatically choose shipping based on payment
method it wouyld be great. I dont mind being paid via Paypal but you´ll have
to pay the €20 tracing fee on top of that €10 shipping...
|
|
Author: | PurpleDave | Posted: | Jan 11, 2018 15:16 | Subject: | Re: Add option to Exclude Paypal for EU | Viewed: | 32 times | Topic: | Suggestions | |
|
| In Suggestions, yorbrick writes:
| Yes, that would be fine. When sellers say EU countries must pay via bank transfer,
I often leave the store as UK-EU transfers can be more costly than by PayPal
by the time the rate has been factored in. Especially if I already have EU funds
in PayPal.
|
Heh. I hadn't ever thought of that, but it does sound inconvenient to have
a Paypal account that's flush with Euros if you can't find anyone in
the EU who accepts Paypal or anyone outside the EU who accepts Euros.
|
|
Author: | Teup | Posted: | Jan 11, 2018 15:12 | Subject: | Re: Add option to Exclude Paypal for EU | Viewed: | 32 times | Topic: | Suggestions | |
|
| Long story short after all this SEPA, IBAN, Euro zone, Europe etc discussion:
Simply allow sellers to set up zones for payment methods the same way they set
up zones for shipping methods
No need for Bricklink to keep up with politics that way, no dilemmas that way,
and who knows the same suggestion may also benefit American or other sellers
for some other reason with some other payment method.
In Suggestions, Brickwilbo writes:
| The BL accepted payment method settings has two options:
1. "Within My Country I Accept Payment By"
2. "Internationally I Accept Payment By"
Please add the possibility to exclude Paypal for EU as accepted method.
Perhaps with the methods "Paypal (EU)" and "Paypal (Worldwide)".
|
|
|
Author: | yorbrick | Posted: | Jan 11, 2018 13:29 | Subject: | Re: Add option to Exclude Paypal for EU | Viewed: | 35 times | Topic: | Suggestions | |
|
| In Suggestions, SylvainLS writes:
| In Suggestions, yorbrick writes:
| In Suggestions, SylvainLS writes:
| In Suggestions, yorbrick writes:
| […]
What do you mean by EU? There are (currently) nine EU countries that don't
use the Euro and bank transfers are not so easy as for Eurozone countries. So
any such option needs to be clear as to which countries are being referred to
- EU countries or Eurozone countries.
|
SEPA (Single Euro Payment Area)?
Which is where SEPA rules¹ apply.
(¹ Mainly, inside SEPA transfers should follow the same rules as a local one.)
|
Yes, that would be fine. When sellers say EU countries must pay via bank transfer,
I often leave the store as UK-EU transfers can be more costly than by PayPal
by the time the rate has been factored in. Especially if I already have EU funds
in PayPal.
|
Er, you know UK is part of SEPA, don’t you?
Your problem is with the “Euro Payment” part.
Region/area/list of countries isn’t the only criterion. Currency is important
too but BL doesn’t seem to take that into account (I’ve never seen a store filtering
that way).
|
I do. When I replied, I must have read my own Eurozone comment and confused it
with the reply.
|
|
Author: | yorbrick | Posted: | Jan 11, 2018 13:26 | Subject: | Re: Add option to Exclude Paypal for EU | Viewed: | 40 times | Topic: | Suggestions | |
|
| | | | SEPA (Single Euro Payment Area)?
Which is where SEPA rules¹ apply.
(¹ Mainly, inside SEPA transfers should follow the same rules as a local one.)
|
Yes, that would be fine. When sellers say EU countries must pay via bank transfer,
I often leave the store as UK-EU transfers can be more costly than by PayPal
by the time the rate has been factored in. Especially if I already have EU funds
in PayPal.
|
it is verry simple , UK citizens voted for the Brex-it not the EU citizens .
I have recived sepa/bank payments from Denmark , USA , china , Hongkong it take
max 2 days to arive . all buyers told me that the fee is a lot lower than the
paypal fee . if a buyer don`t will buy from a EU store who don`t like to sell
with paypal payment move on to an other shop , there are a lot other stores .
|
This has nothing to do with Brexit. The UK was never part of the Eurozone, it
never adopted the Euro. We are currently still part of the EU. If a seller says
that paypal is not allowed for buyers from EU countries, then it applies to me
and other UK buyers, and buyers from Denmark, Sweden, etc, who are also not part
of the Eurozone but are in the EU.
But yes, it is simple to move on to another store (after least favouriting the
ones that will only take bank transfer). Of course, once we leave the EU, those
stores will still be on my least favourites list and unlikely to come off even
if I can then use PayPal with them again.
|
|
Author: | SylvainLS | Posted: | Jan 11, 2018 13:06 | Subject: | Re: Add option to Exclude Paypal for EU | Viewed: | 29 times | Topic: | Suggestions | |
|
| In Suggestions, yorbrick writes:
| In Suggestions, SylvainLS writes:
| In Suggestions, yorbrick writes:
| […]
What do you mean by EU? There are (currently) nine EU countries that don't
use the Euro and bank transfers are not so easy as for Eurozone countries. So
any such option needs to be clear as to which countries are being referred to
- EU countries or Eurozone countries.
|
SEPA (Single Euro Payment Area)?
Which is where SEPA rules¹ apply.
(¹ Mainly, inside SEPA transfers should follow the same rules as a local one.)
|
Yes, that would be fine. When sellers say EU countries must pay via bank transfer,
I often leave the store as UK-EU transfers can be more costly than by PayPal
by the time the rate has been factored in. Especially if I already have EU funds
in PayPal.
|
Er, you know UK is part of SEPA, don’t you?
Your problem is with the “Euro Payment” part.
Region/area/list of countries isn’t the only criterion. Currency is important
too but BL doesn’t seem to take that into account (I’ve never seen a store filtering
that way).
|
|
Author: | Speciale | Posted: | Jan 11, 2018 13:02 | Subject: | Re: Add option to Exclude Paypal for EU | Viewed: | 45 times | Topic: | Suggestions | |
|
| In Suggestions, yorbrick writes:
| In Suggestions, SylvainLS writes:
| In Suggestions, yorbrick writes:
| […]
What do you mean by EU? There are (currently) nine EU countries that don't
use the Euro and bank transfers are not so easy as for Eurozone countries. So
any such option needs to be clear as to which countries are being referred to
- EU countries or Eurozone countries.
|
SEPA (Single Euro Payment Area)?
Which is where SEPA rules¹ apply.
(¹ Mainly, inside SEPA transfers should follow the same rules as a local one.)
|
Yes, that would be fine. When sellers say EU countries must pay via bank transfer,
I often leave the store as UK-EU transfers can be more costly than by PayPal
by the time the rate has been factored in. Especially if I already have EU funds
in PayPal.
|
it is verry simple , UK citizens voted for the Brex-it not the EU citizens .
I have recived sepa/bank payments from Denmark , USA , china , Hongkong it take
max 2 days to arive . all buyers told me that the fee is a lot lower than the
paypal fee . if a buyer don`t will buy from a EU store who don`t like to sell
with paypal payment move on to an other shop , there are a lot other stores .
|
|
Author: | Cob | Posted: | Jan 11, 2018 12:20 | Subject: | Use short names for payment methods | Viewed: | 70 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| I would like to use display the payment method on my orders page, however the
name is just simply too long.
Can we use short names for the payment method. Currently for example Stripe
is displayed as "Credit/Debit (Powered by Stripe)". Can it simply be called "Stripe".
It would be even better if we had to option to display the micro tag number,
example
27 = PayPal Onsite
26 = Stripe
Thank you,
Cob
|
|
Author: | yorbrick | Posted: | Jan 11, 2018 12:01 | Subject: | Re: Add option to Exclude Paypal for EU | Viewed: | 35 times | Topic: | Suggestions | |
|
| In Suggestions, SylvainLS writes:
| In Suggestions, yorbrick writes:
| […]
What do you mean by EU? There are (currently) nine EU countries that don't
use the Euro and bank transfers are not so easy as for Eurozone countries. So
any such option needs to be clear as to which countries are being referred to
- EU countries or Eurozone countries.
|
SEPA (Single Euro Payment Area)?
Which is where SEPA rules¹ apply.
(¹ Mainly, inside SEPA transfers should follow the same rules as a local one.)
|
Yes, that would be fine. When sellers say EU countries must pay via bank transfer,
I often leave the store as UK-EU transfers can be more costly than by PayPal
by the time the rate has been factored in. Especially if I already have EU funds
in PayPal.
|
|
Author: | SylvainLS | Posted: | Jan 11, 2018 08:04 | Subject: | Re: Add option to Exclude Paypal for EU | Viewed: | 42 times | Topic: | Suggestions | |
|
| In Suggestions, yorbrick writes:
| […]
What do you mean by EU? There are (currently) nine EU countries that don't
use the Euro and bank transfers are not so easy as for Eurozone countries. So
any such option needs to be clear as to which countries are being referred to
- EU countries or Eurozone countries.
|
SEPA (Single Euro Payment Area)?
Which is where SEPA rules¹ apply.
(¹ Mainly, inside SEPA transfers should follow the same rules as a local one.)
|
|
Author: | yorbrick | Posted: | Jan 11, 2018 07:23 | Subject: | Re: Add option to Exclude Paypal for EU | Viewed: | 31 times | Topic: | Suggestions | |
|
| In Suggestions, Hunny1 writes:
| In Suggestions, Brickwilbo writes:
| The BL accepted payment method settings has two options:
1. "Within My Country I Accept Payment By"
2. "Internationally I Accept Payment By"
Please add the possibility to exclude Paypal for EU as accepted method.
Perhaps with the methods "Paypal (EU)" and "Paypal (Worldwide)".
|
The status is still open.
But I still agree with that suggestion! I don't see any reason to pay PayPal
fee when bank transfer is very easy and fast within EU (SEPA, IBAN). Buyers from
EU choose mostly PayPal but are willing to switch to bank transfer when I ask
them. So it's not a general problem.
|
What do you mean by EU? There are (currently) nine EU countries that don't
use the Euro and bank transfers are not so easy as for Eurozone countries. So
any such option needs to be clear as to which countries are being referred to
- EU countries or Eurozone countries.
|
|
Author: | Teup | Posted: | Jan 11, 2018 07:04 | Subject: | Re: Add option to Exclude Paypal for EU | Viewed: | 26 times | Topic: | Suggestions | |
|
| In Suggestions, bagelboybugle writes:
| 99% of my UK buyers pay with paypal, 0.2% pay by bank transfer, 0.8% with other
methods such as cheque or postal order. 97% of my SEPA buyers pay with paypal,
just 3% with IBAN/SEPA.
I for one would not want to write off such a large proportion of my customers.
But I feel if you wish to, you should be allowed to, not by choosing who you
can accept paypal from, but by choosing simply to not accept paypal at all.
You either want the cake or you dont, there is little point in picking out the
jam and cream in the middle and just eating the sponge because the jam and cream
contain afew extra calories.
What I still cannot understand is why accepting paypal from outside the EU with
all its fees is good enough for you, but within the EU it isnt?
|
I have also thought of not accepting PayPal within the EU. If it will make buyers
choose IBAN instead, fees are avoided and everyone wins. As far as I know many
Dutch sellers already don't allow PayPal for domestic transactions and that
makes total sense. If some wish to scale that up to EU level, I don't see
any reason why they shouldn't be able to do that.
Either way, maybe you're just posting out of curiosity, then this discussion
makes sense of course. But ultimately, it is not necessary for you to understand
the reason in order to be OK with it (or even support it). If I want to eat ice-cream
only on mondays, I can do so even though the reasons don't make sense to
other people. The way I see it, this is a suggestion that increases Bricklink
functionality, and it is clear that some people want to use it, so let's
do it.
Random goof: "5.4 PayPal and your customers. In representations or in public
communications to your customers, you shall not mischaracterise or disparage
PayPal as a payment method." So, if you want a seller's PayPal account to
be terminated, ask them to confirm a negative aspect on PayPal - either answer
will be a breach of the agreement
|
|
Author: | Teup | Posted: | Jan 11, 2018 06:55 | Subject: | Re: Add option to Exclude Paypal for EU | Viewed: | 30 times | Topic: | Suggestions | |
|
| You are describing it as some kind of apocalyptic scenario when in fact it is
the normal way of doing business Companies worldwide use different prices,
conditions, product ranges for different markets that they target - or refuse
to target. There are good and bad sides to that, but the reality is that they
can do this freely. It's not like you can only sign up to become a seller
on Bricklink if you vow to cater the entire world.
In fact, a shop is allowed to refuse you, personally. I have been blocked by
one of this countries major websites, Bol.com, for ordering too much that was
on offer, even though other people were allowed to buy that. I made a call to
this government consumer rights helpdesk and they told me this is in fact allowed,
and that it only is discrimination when a seller will categorically refuse a
group of people based on ethnicity or religion.
Maybe there are grey areas or slipperly slopes, but when it comes to country-based
policies, it is understood that the considerations are practical/financial and
not personal discrimination of individuals. Although there are also sellers on
Bricklink who choose to boycot certain countries.
In Suggestions, Murky writes:
| I wonder,
If sellers should be allowed to exclude buyers base solely based of their country,
should we next exclude people based on religious affiliation, what bank they
use, gender or sexual preference?
There is no "forcing" of course, a buyer can simply go elsewhere.
But it forcing in the sense that if I wish to buy from the given store, I am
restricted to a certain payment type. A restriction I would not have if I lived
elsewhere.
It is ridiculous of course, that my "next" examples will ever happen.
But if the discussion turns to "principles", then there is no difference between
restrictions made on location compared to the other restrictions.
And there are more payment options than PayPal of course, so allowing that (but
not X and Y) also technically "restricts" I suppose, but it is silly to argue
that "everything" should be allowed, no one is really claiming that. The argument
is that saying that certain countries will not have the same options as everyone
is wrong. PayPal should always be allowed.
BL's "only" restriction is the age limit of 18. But this is a legal exception
which we must have for things to work.
And yes, I know of course that some stores only sell to some countries, but that
is not really a part of the issue here.
IBAN is quite good for the sellers of course, but it is a demerit to the buyers.
If we are to give up all buyer protection, then at least we should get something
in return.
Oh, and a transfer from one account to another - unless it is very large - will
initially avoid any taxation system and accounting out there. There is no bill
sent to the buyer per se, so the bank will have no information that the money
transferred is in relations to invoice this and that.
A seller can thus relatively easy hide the money transferred from accounting
and thus taxation purposes.
Now I am not saying that our esteemed BL seller will do such things, but why
create a tool and option for the ones that do fall prey to the temptation of
avoiding taxes (if only a wee bit)?
If we allow restrictions on payment, shipping, insurance, what bricks can be
bought etc. made on location (more than we already do), I fear we are opening
a hornets nest, and the buyers will pay the price for it. (And in the end of
course, it will affect the sellers).
|
|
|
Author: | A.Lukinov | Posted: | Jan 11, 2018 06:27 | Subject: | Inventory Change Request for Set 8068-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 87086pb038 White Technic, Panel Fairing # 2 Small Smooth Short, Side B With Vent Grille and 'RESCUE' Pattern (Sticker) - Set 8068 (Counterpart)
|
Author: | A.Lukinov | Posted: | Jan 11, 2018 06:26 | Subject: | Inventory Change Request for Set 8068-1 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 87080pb038 White Technic, Panel Fairing # 1 Small Smooth Short, Side A with Vent Grille and 'RESCUE' Pattern (Sticker) - Set 8068 (Counterpart)
|
|
Author: | zux | Posted: | Jan 11, 2018 06:24 | Subject: | Re: Add option to Exclude Paypal for EU | Viewed: | 43 times | Topic: | Suggestions | |
|
| In Suggestions, Hunny1 writes:
| In Suggestions, Brickwilbo writes:
| The BL accepted payment method settings has two options:
1. "Within My Country I Accept Payment By"
2. "Internationally I Accept Payment By"
Please add the possibility to exclude Paypal for EU as accepted method.
Perhaps with the methods "Paypal (EU)" and "Paypal (Worldwide)".
|
The status is still open.
But I still agree with that suggestion! I don't see any reason to pay PayPal
fee when bank transfer is very easy and fast within EU (SEPA, IBAN). Buyers from
EU choose mostly PayPal but are willing to switch to bank transfer when I ask
them. So it's not a general problem.
Markus
|
Paypal allows order process on the spot, while IBAN could take a few days and
is affected by public holidays. This would require just a rough fee of 5%. Usually
it is worth all the money.
Disabling Paypal for EU members will get you less people willing to place an
order. Also Paypal protects buyers. Getting refund for IBAN, in case of any
troubles with a seller (not shipping, not respondint, etc), is a nightmare. Usually
myself, as buyer, IBAN is treated as a higher risk due to that. This will also
cause orders to be processed slower as you need some time (days) before you can
confirm you've received a payment. From buyer point of view, sometimes, it
is essential to get bricks ASAP. This will no longer be possible with IBAN-only
option.
So please go ahead if you don't need buyers money.
|
|
Author: | Hunny1 | Posted: | Jan 11, 2018 05:23 | Subject: | Re: Add option to Exclude Paypal for EU | Viewed: | 49 times | Topic: | Suggestions | |
|
| In Suggestions, Brickwilbo writes:
| The BL accepted payment method settings has two options:
1. "Within My Country I Accept Payment By"
2. "Internationally I Accept Payment By"
Please add the possibility to exclude Paypal for EU as accepted method.
Perhaps with the methods "Paypal (EU)" and "Paypal (Worldwide)".
|
The status is still open.
But I still agree with that suggestion! I don't see any reason to pay PayPal
fee when bank transfer is very easy and fast within EU (SEPA, IBAN). Buyers from
EU choose mostly PayPal but are willing to switch to bank transfer when I ask
them. So it's not a general problem.
Markus
|
|
Author: | A.Lukinov | Posted: | Jan 10, 2018 23:28 | Subject: | Inventory Change Request for Set 42029-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 64682pb018 Red Technic, Panel Fairing #18 Large Smooth, Side B with White Stripe, Black Air Intake and Scratches Pattern (Sticker) - Set 42029 (Counterpart)
|
Author: | A.Lukinov | Posted: | Jan 10, 2018 23:27 | Subject: | Inventory Change Request for Set 42029-1 | Viewed: | 10 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 64392pb018 Red Technic, Panel Fairing #17 Large Smooth, Side A with White Stripe, Black Air Intake and Scratches Pattern (Sticker) - Set 42029 (Counterpart)
|
Author: | A.Lukinov | Posted: | Jan 10, 2018 23:27 | Subject: | Inventory Change Request for Set 9398-1 | Viewed: | 8 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 64782pb018 White Technic, Panel Plate 5 x 11 x 1 with LEGO TECHNIC Logo Pattern (Sticker) - Set 9398 (Counterpart)
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|