Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | Cassiopeia  | | Posted: | Jun 27, 2017 22:05 | | Subject: | Order Notification | | Viewed: | 76 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Would it be possible to have a number pop up on the my store button when an order
comes in like it does for a message on my bl? I send a lot of time on bricklink,
but not a lot of time checking emails so I would be good to see I have an order.
|
 |
| Author: | jennnifer | | Posted: | Jun 27, 2017 20:00 | | Subject: | Inventory Change Request for Set 21308-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 33078 Black Hot Dog / Sausage (Extra)
* Add 1 Part 4592c02 Black Lever Small Base with Black Lever (Extra)
* Add 1 Part 3024 Black Plate 1 x 1 (Extra)
* Add 1 Part 3024 Red Plate 1 x 1 (Extra)
* Add 1 Part 3024 White Plate 1 x 1 (Extra)
* Add 1 Part 3024 Tan Plate 1 x 1 (Extra)
* Add 1 Part 3024 Dark Blue Plate 1 x 1 (Extra)
* Add 1 Part 3024 Bright Light Blue Plate 1 x 1 (Extra)
* Add 1 Part 3024 Light Aqua Plate 1 x 1 (Extra)
* Add 1 Part 3024 Bright Pink Plate 1 x 1 (Extra)
* Add 1 Part 4073 Black Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Red Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Reddish Brown Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 3070b Black Tile 1 x 1 with Groove (Extra)
* Add 1 Part 3070b Red Tile 1 x 1 with Groove (Extra)
* Add 1 Part 3070b White Tile 1 x 1 with Groove (Extra)
* Add 1 Part 3070b Dark Bluish Gray Tile 1 x 1 with Groove (Extra)
* Add 1 Part 3070b Lime Tile 1 x 1 with Groove (Extra)
* Add 1 Part 3070b Magenta Tile 1 x 1 with Groove (Extra)
* Add 1 Part 3070b Dark Pink Tile 1 x 1 with Groove (Extra)
* Add 1 Part 98138 Black Tile, Round 1 x 1 (Extra)
* Add 1 Part 98138 White Tile, Round 1 x 1 (Extra)
* Add 1 Part 98138 Red Tile, Round 1 x 1 (Extra)
* Add 1 Part 98138 Light Bluish Gray Tile, Round 1 x 1 (Extra)
* Add 1 Part 98138 Trans-Light Blue Tile, Round 1 x 1 (Extra)
* Add 1 Part 98138pb074 Black Tile, Round 1 x 1 with White Circle Eye Pupil Offset Pattern (Extra)
* Add 1 Part 33291 Bright Light Orange Plate, Round 1 x 1 with Flower Edge (4 Knobs) (Extra)
* Add 1 Part 54200 Bright Light Orange Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 54200 White Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 85861 White Plate, Round 1 x 1 with Open Stud (Extra)
* Add 1 Part 54200 Tan Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 54200 Green Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 54200 Lime Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 54200 Dark Pink Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 22388 Trans-Dark Pink Slope 45 1 x 1 x 2/3 Quadruple Convex (Extra)
* Add 1 Part 89522 White Horn (Unicorn) (Extra)
Comments from Submitter:
Sealed set
|
|
| Author: | axaday | | Posted: | Jun 27, 2017 19:36 | | Subject: | Inventory Change Request for Set 71348-1 | | Viewed: | 11 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side (Extra)
|
|
| Author: | axaday | | Posted: | Jun 27, 2017 18:46 | | Subject: | Inventory Change Request for Set 71267-1 | | Viewed: | 13 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 93061 White Arm Skeleton, Bent with Clips at 90 degrees (Vertical Grip) (Extra)
* Add 1 Part 4073 White Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Pearl Gold Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4599b Tan Tap 1 x 1 without Hole in End (Extra)
* Add 1 Part 3070b Trans-Clear Tile 1 x 1 with Groove (Extra)
* Add 1 Part 53451 White Barb / Claw / Horn - Small (Extra)
* Add 1 Part 87747 White Barb / Claw / Horn - Large (Extra)
* Add 1 Part 4073 Reddish Brown Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 3024 Reddish Brown Plate 1 x 1 (Extra)
* Add 1 Part 87994 Reddish Brown Bar 3L (Bar Arrow) (Extra)
|
|
| Author: | calsbricks | | Posted: | Jun 27, 2017 12:12 | | Subject: | Inventory Change Request for Set 60012-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 4865b Trans-Light Blue Panel 1 x 2 x 1 with Rounded Corners (Alternate)
* Add 2 Part 92409 Black Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread (Alternate)
Comments from Submitter:
2 sets parted out today both with alternates as above
|
|
| Author: | electricbaer | | Posted: | Jun 27, 2017 11:37 | | Subject: | Inventory Change Request for Set 7962-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4150pb180L White Tile, Round 2 x 2 with Orange Triangles and White Alien Characters on Black Background Pattern Model Left Side (Sticker) - Set 7962 (Counterpart)
Comments from Submitter:
Please reject my previous request upon your excellent clarification of there being a left/right variation. Thanks!
|
|
| Author: | electricbaer | | Posted: | Jun 27, 2017 11:36 | | Subject: | Inventory Change Request for Set 60049-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3069bpb595 White Tile 1 x 2 with Black 'HA60049' License Plate Pattern (Sticker) - Set 60049 (Counterpart)
* Add 1 Part 3069bpb596 White Tile 1 x 2 with Black 'KH60049' License Plate Pattern (Sticker) - Set 60049 (Counterpart)
* Add 1 Part 2431pb473 Light Bluish Gray Tile 1 x 4 with Black 'HA60049' License Plate Pattern (Sticker) - Set 60049 (Counterpart)
* Add 1 Part 47753pb073L White Wedge 4 x 4 No Top Studs with Blue 'Police' Thin Font on White Background Pattern Model Left Side (Sticker) - Set 60049 (Counterpart)
* Add 1 Part 47753pb073R White Wedge 4 x 4 No Top Studs with Blue 'Police' Thin Font on White Background Pattern Model Right Side (Sticker) - Set 60049 (Counterpart)
* Add 2 Part 30413pb044 White Panel 1 x 4 x 1 with Blue 'POLICE' Thin Font on White Background Pattern (Sticker) - Sets 60047 / 60049 (Counterpart)
|
|
| Author: | normann1974 | | Posted: | Jun 26, 2017 16:45 | | Subject: | Inventory Change Request for Set 42035-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 32525pb020 Yellow Technic, Liftarm 1 x 11 Thick with Black and Yellow Danger Stripes Pattern on Ends (Stickers) - Set 42035 (Counterpart)
Comments from Submitter:
This is my first addition of a part and adding it to an inventory. Please be kind to inform me of any errors made.
|
|
| Author: | electricbaer | | Posted: | Jun 26, 2017 10:08 | | Subject: | Inventory Change Request for Set 7713-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3068bpb1095 Red Tile 2 x 2 with Black Trapezoids and Line and Silver Triangle Pattern (Sticker) - Set 7713 (Counterpart)
|
| Author: | electricbaer | | Posted: | Jun 26, 2017 10:07 | | Subject: | Inventory Change Request for Set 7962-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 4150pb180 White Tile, Round 2 x 2 with Orange Triangles and White Alien Characters on Black Background Pattern (Sticker) - Set 7962 (Counterpart)
|
| Author: | NelisSolis | | Posted: | Jun 25, 2017 05:57 | | Subject: | Inventory Change Request for Set 60103-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 6 Part 2447 Trans-Black Minifig, Visor Standard (Extra)
Comments from Submitter:
Based on sealed set content
|
| Author: | NelisSolis | | Posted: | Jun 25, 2017 04:55 | | Subject: | Inventory Change Request for Set 60103-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 50945 Black Tire 14mm D. x 6mm Solid Smooth (Extra)
Comments from Submitter:
Based on 3x sealed set contents
|
|
| Author: | NelisSolis | | Posted: | Jun 25, 2017 04:54 | | Subject: | Inventory Change Request for Set 60103-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 194cx2 Yellow Minifig, Utensil Hose Nozzle Simple with 35L Black String (Extra)
* Add 1 Part 4265c Yellow Technic Bush 1/2 Smooth (Extra)
* Add 2 Part 98138 Trans-Yellow Tile, Round 1 x 1 (Extra)
* Add 3 Part 3024 Trans-Red Plate 1 x 1 (Extra)
* Add 2 Part 3070b Trans-Red Tile 1 x 1 with Groove (Extra)
* Add 2 Part 98138 Trans-Red Tile, Round 1 x 1 (Extra)
* Add 3 Part 3024 Trans-Green Plate 1 x 1 (Extra)
* Add 1 Part 3070b Trans-Green Tile 1 x 1 with Groove (Extra)
* Add 1 Part 98138 Trans-Green Tile, Round 1 x 1 (Extra)
* Add 2 Part 54200 Trans-Light Blue Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Trans-Orange Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 54200 Red Slope 30 1 x 1 x 2/3 (Extra)
* Add 4 Part 3024 White Plate 1 x 1 (Extra)
* Add 1 Part 98138 Light Bluish Gray Tile, Round 1 x 1 (Extra)
* Add 1 Part 30170 Dark Bluish Gray Minifig, Visor Goggles (Extra)
* Add 1 Part 3024 Black Plate 1 x 1 (Extra)
* Add 3 Part 59895 Black Tire 14mm D. x 4mm Smooth Small Single - New Style - with Number Molded on Side (Extra)
Comments from Submitter:
Extra items, based on sealed set content (previous inventory was probably based on parts list only).
|
|
| Author: | Miro78 | | Posted: | Jun 24, 2017 08:42 | | Subject: | Re: Electronic delivery need for instant checkout | | Viewed: | 35 times | | Topic: | Suggestions | |
|
| In Suggestions, paulvdb writes:
| | In Suggestions, M.Boss writes:
| | In Suggestions, Miro78 writes:
| | With instant checkout looming around the corner, I would like to have the option
for my buyers to be able to use the instant checkout option when purchasing my
electronically delivered custom model instructions.
However, at the moment, I cannot differentiate these electronic instructions
from actual paper instructions. I am not allowed to set the weight to zero grams
or selecting a checkbox that these are electronic. How will this be handled during
instant checkout with causing some sort of error?
Please allow for an option for sellers of custom instructions to be able to allow
instant checkout.
There are other sellers who use Bricklink for selling these and would benefit
from this implementation. It would also cause less issues and confusion if this
is properly handled. Lastly, this will draw more sellers of custom instructions
to sell through Bricklink instead of other venues.
Thank you for the consideration.
Miro
|
I went into the preview and made a shipping method with no cost, and made a note
for people only buying digital instructions to use it. It would be better if
we could designate certain items to only use certain shipping methods. You can
go see what I did by going to my store in the preview site and buying instructions.
M.Boss
|
But that shipping method is not limited only to instructions. Buyers can also
select it if they buy items that need to be shipped. I just checked your store
and it was the first listed and automatically selected shipping method. So buyers
will easily accidentally select it if they're not paying attention and just
quickly want to check out.
|
Thank you both for the input. That is exactly the point of my suggestion. I feel
that BL team needs to create a an electronic shipping option that won't allow
physical items to be checked out. In addition, the electronic items need to be
differentiated from physical items, either via a new category or weight. Currently
weight of zero grams is not allowed.
Miro
|
|
| Author: | gumboot | | Posted: | Jun 24, 2017 03:22 | | Subject: | Re: Classic Wanted List Unavailable on June 5th | | Viewed: | 44 times | | Topic: | Suggestions | |
|
| A major flaw with the new Part Out feature of the Wanted List is that the order
of the parts displayed is not adjustable. I usually sort by colour rather than
what ever order it currently uses.
|
|
| Author: | M.Boss | | Posted: | Jun 23, 2017 12:46 | | Subject: | Re: Electronic delivery need for instant checkout | | Viewed: | 33 times | | Topic: | Suggestions | |
|
| In Suggestions, paulvdb writes:
| | In Suggestions, M.Boss writes:
| | In Suggestions, Miro78 writes:
| | With instant checkout looming around the corner, I would like to have the option
for my buyers to be able to use the instant checkout option when purchasing my
electronically delivered custom model instructions.
However, at the moment, I cannot differentiate these electronic instructions
from actual paper instructions. I am not allowed to set the weight to zero grams
or selecting a checkbox that these are electronic. How will this be handled during
instant checkout with causing some sort of error?
Please allow for an option for sellers of custom instructions to be able to allow
instant checkout.
There are other sellers who use Bricklink for selling these and would benefit
from this implementation. It would also cause less issues and confusion if this
is properly handled. Lastly, this will draw more sellers of custom instructions
to sell through Bricklink instead of other venues.
Thank you for the consideration.
Miro
|
I went into the preview and made a shipping method with no cost, and made a note
for people only buying digital instructions to use it. It would be better if
we could designate certain items to only use certain shipping methods. You can
go see what I did by going to my store in the preview site and buying instructions.
M.Boss
|
But that shipping method is not limited only to instructions. Buyers can also
select it if they buy items that need to be shipped. I just checked your store
and it was the first listed and automatically selected shipping method. So buyers
will easily accidentally select it if they're not paying attention and just
quickly want to check out.
|
Yes that is the problem with a shipping method like that.
|
|
| Author: | paulvdb | | Posted: | Jun 23, 2017 12:16 | | Subject: | Re: Electronic delivery need for instant checkout | | Viewed: | 29 times | | Topic: | Suggestions | |
|
| In Suggestions, M.Boss writes:
| | In Suggestions, Miro78 writes:
| | With instant checkout looming around the corner, I would like to have the option
for my buyers to be able to use the instant checkout option when purchasing my
electronically delivered custom model instructions.
However, at the moment, I cannot differentiate these electronic instructions
from actual paper instructions. I am not allowed to set the weight to zero grams
or selecting a checkbox that these are electronic. How will this be handled during
instant checkout with causing some sort of error?
Please allow for an option for sellers of custom instructions to be able to allow
instant checkout.
There are other sellers who use Bricklink for selling these and would benefit
from this implementation. It would also cause less issues and confusion if this
is properly handled. Lastly, this will draw more sellers of custom instructions
to sell through Bricklink instead of other venues.
Thank you for the consideration.
Miro
|
I went into the preview and made a shipping method with no cost, and made a note
for people only buying digital instructions to use it. It would be better if
we could designate certain items to only use certain shipping methods. You can
go see what I did by going to my store in the preview site and buying instructions.
M.Boss
|
But that shipping method is not limited only to instructions. Buyers can also
select it if they buy items that need to be shipped. I just checked your store
and it was the first listed and automatically selected shipping method. So buyers
will easily accidentally select it if they're not paying attention and just
quickly want to check out.
|
|
| Author: | M.Boss | | Posted: | Jun 23, 2017 12:05 | | Subject: | Re: Electronic delivery need for instant checkout | | Viewed: | 38 times | | Topic: | Suggestions | |
|
| In Suggestions, Miro78 writes:
| | With instant checkout looming around the corner, I would like to have the option
for my buyers to be able to use the instant checkout option when purchasing my
electronically delivered custom model instructions.
However, at the moment, I cannot differentiate these electronic instructions
from actual paper instructions. I am not allowed to set the weight to zero grams
or selecting a checkbox that these are electronic. How will this be handled during
instant checkout with causing some sort of error?
Please allow for an option for sellers of custom instructions to be able to allow
instant checkout.
There are other sellers who use Bricklink for selling these and would benefit
from this implementation. It would also cause less issues and confusion if this
is properly handled. Lastly, this will draw more sellers of custom instructions
to sell through Bricklink instead of other venues.
Thank you for the consideration.
Miro
|
I went into the preview and made a shipping method with no cost, and made a note
for people only buying digital instructions to use it. It would be better if
we could designate certain items to only use certain shipping methods. You can
go see what I did by going to my store in the preview site and buying instructions.
M.Boss
|
|
| Author: | Miro78 | | Posted: | Jun 23, 2017 10:28 | | Subject: | Electronic delivery need for instant checkout | | Viewed: | 130 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| With instant checkout looming around the corner, I would like to have the option
for my buyers to be able to use the instant checkout option when purchasing my
electronically delivered custom model instructions.
However, at the moment, I cannot differentiate these electronic instructions
from actual paper instructions. I am not allowed to set the weight to zero grams
or selecting a checkbox that these are electronic. How will this be handled during
instant checkout with causing some sort of error?
Please allow for an option for sellers of custom instructions to be able to allow
instant checkout.
There are other sellers who use Bricklink for selling these and would benefit
from this implementation. It would also cause less issues and confusion if this
is properly handled. Lastly, this will draw more sellers of custom instructions
to sell through Bricklink instead of other venues.
Thank you for the consideration.
Miro
|
|
| Author: | Brickwilbo | | Posted: | Jun 23, 2017 04:19 | | Subject: | Re: separate picking list by New and Used | | Viewed: | 23 times | | Topic: | Suggestions | |
|
| In Suggestions, RubyGirl writes:
| | In Suggestions, Brickwilbo writes:
| | In Suggestions, logansbricks writes:
| | Howdy guys! I was wondering if it is possible to have our picking list separated
into New and Used But still be in order of item number? For example, all the
new would be at the top of the list but be in the correct item number order,
then the used (in correct order) would be after the new. It would be soooo helpful
since the New and Used are obviously in different places in our physical stores.
Yikes, dare I say this BUT, that is how Brickowl does it and it is just much,
much easier to pull.
thanks for lending an ear
sherry
|
Change the sorting below the order details page
|
I know what you mean OP. From where I sit, there is no option for "condition,
then number". For myself I would love "condition, remarks, number" .
|
https://www.bricklink.com/orderSettings.asp
| | I also notice that my spreadsheet doesn't sort 123 and 123a in the right
order so I have to take an extra step to make that work.
|
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
USA, Connecticut
United Kingdom, England
Denmark
Netherlands, Zuid-Holland
Australia, Victoria
