Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | Cassiopeia | Posted: | Jun 27, 2017 22:05 | Subject: | Order Notification | Viewed: | 76 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Would it be possible to have a number pop up on the my store button when an order
comes in like it does for a message on my bl? I send a lot of time on bricklink,
but not a lot of time checking emails so I would be good to see I have an order.
|
|
Author: | jennnifer | Posted: | Jun 27, 2017 20:00 | Subject: | Inventory Change Request for Set 21308-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 33078 Black Hot Dog / Sausage (Extra)
* Add 1 Part 4592c02 Black Lever Small Base with Black Lever (Extra)
* Add 1 Part 3024 Black Plate 1 x 1 (Extra)
* Add 1 Part 3024 Red Plate 1 x 1 (Extra)
* Add 1 Part 3024 White Plate 1 x 1 (Extra)
* Add 1 Part 3024 Tan Plate 1 x 1 (Extra)
* Add 1 Part 3024 Dark Blue Plate 1 x 1 (Extra)
* Add 1 Part 3024 Bright Light Blue Plate 1 x 1 (Extra)
* Add 1 Part 3024 Light Aqua Plate 1 x 1 (Extra)
* Add 1 Part 3024 Bright Pink Plate 1 x 1 (Extra)
* Add 1 Part 4073 Black Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Red Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Reddish Brown Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 3070b Black Tile 1 x 1 with Groove (Extra)
* Add 1 Part 3070b Red Tile 1 x 1 with Groove (Extra)
* Add 1 Part 3070b White Tile 1 x 1 with Groove (Extra)
* Add 1 Part 3070b Dark Bluish Gray Tile 1 x 1 with Groove (Extra)
* Add 1 Part 3070b Lime Tile 1 x 1 with Groove (Extra)
* Add 1 Part 3070b Magenta Tile 1 x 1 with Groove (Extra)
* Add 1 Part 3070b Dark Pink Tile 1 x 1 with Groove (Extra)
* Add 1 Part 98138 Black Tile, Round 1 x 1 (Extra)
* Add 1 Part 98138 White Tile, Round 1 x 1 (Extra)
* Add 1 Part 98138 Red Tile, Round 1 x 1 (Extra)
* Add 1 Part 98138 Light Bluish Gray Tile, Round 1 x 1 (Extra)
* Add 1 Part 98138 Trans-Light Blue Tile, Round 1 x 1 (Extra)
* Add 1 Part 98138pb074 Black Tile, Round 1 x 1 with White Circle Eye Pupil Offset Pattern (Extra)
* Add 1 Part 33291 Bright Light Orange Plate, Round 1 x 1 with Flower Edge (4 Knobs) (Extra)
* Add 1 Part 54200 Bright Light Orange Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 54200 White Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 85861 White Plate, Round 1 x 1 with Open Stud (Extra)
* Add 1 Part 54200 Tan Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 54200 Green Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 54200 Lime Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 54200 Dark Pink Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 22388 Trans-Dark Pink Slope 45 1 x 1 x 2/3 Quadruple Convex (Extra)
* Add 1 Part 89522 White Horn (Unicorn) (Extra)
Comments from Submitter:
Sealed set
|
|
Author: | axaday | Posted: | Jun 27, 2017 19:36 | Subject: | Inventory Change Request for Set 71348-1 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side (Extra)
|
|
Author: | axaday | Posted: | Jun 27, 2017 18:46 | Subject: | Inventory Change Request for Set 71267-1 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 93061 White Arm Skeleton, Bent with Clips at 90 degrees (Vertical Grip) (Extra)
* Add 1 Part 4073 White Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Pearl Gold Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4599b Tan Tap 1 x 1 without Hole in End (Extra)
* Add 1 Part 3070b Trans-Clear Tile 1 x 1 with Groove (Extra)
* Add 1 Part 53451 White Barb / Claw / Horn - Small (Extra)
* Add 1 Part 87747 White Barb / Claw / Horn - Large (Extra)
* Add 1 Part 4073 Reddish Brown Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 3024 Reddish Brown Plate 1 x 1 (Extra)
* Add 1 Part 87994 Reddish Brown Bar 3L (Bar Arrow) (Extra)
|
|
Author: | calsbricks | Posted: | Jun 27, 2017 12:12 | Subject: | Inventory Change Request for Set 60012-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 4865b Trans-Light Blue Panel 1 x 2 x 1 with Rounded Corners (Alternate)
* Add 2 Part 92409 Black Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread (Alternate)
Comments from Submitter:
2 sets parted out today both with alternates as above
|
|
Author: | electricbaer | Posted: | Jun 27, 2017 11:37 | Subject: | Inventory Change Request for Set 7962-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4150pb180L White Tile, Round 2 x 2 with Orange Triangles and White Alien Characters on Black Background Pattern Model Left Side (Sticker) - Set 7962 (Counterpart)
Comments from Submitter:
Please reject my previous request upon your excellent clarification of there being a left/right variation. Thanks!
|
|
Author: | electricbaer | Posted: | Jun 27, 2017 11:36 | Subject: | Inventory Change Request for Set 60049-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3069bpb595 White Tile 1 x 2 with Black 'HA60049' License Plate Pattern (Sticker) - Set 60049 (Counterpart)
* Add 1 Part 3069bpb596 White Tile 1 x 2 with Black 'KH60049' License Plate Pattern (Sticker) - Set 60049 (Counterpart)
* Add 1 Part 2431pb473 Light Bluish Gray Tile 1 x 4 with Black 'HA60049' License Plate Pattern (Sticker) - Set 60049 (Counterpart)
* Add 1 Part 47753pb073L White Wedge 4 x 4 No Top Studs with Blue 'Police' Thin Font on White Background Pattern Model Left Side (Sticker) - Set 60049 (Counterpart)
* Add 1 Part 47753pb073R White Wedge 4 x 4 No Top Studs with Blue 'Police' Thin Font on White Background Pattern Model Right Side (Sticker) - Set 60049 (Counterpart)
* Add 2 Part 30413pb044 White Panel 1 x 4 x 1 with Blue 'POLICE' Thin Font on White Background Pattern (Sticker) - Sets 60047 / 60049 (Counterpart)
|
|
Author: | normann1974 | Posted: | Jun 26, 2017 16:45 | Subject: | Inventory Change Request for Set 42035-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 32525pb020 Yellow Technic, Liftarm 1 x 11 Thick with Black and Yellow Danger Stripes Pattern on Ends (Stickers) - Set 42035 (Counterpart)
Comments from Submitter:
This is my first addition of a part and adding it to an inventory. Please be kind to inform me of any errors made.
|
|
Author: | electricbaer | Posted: | Jun 26, 2017 10:08 | Subject: | Inventory Change Request for Set 7713-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3068bpb1095 Red Tile 2 x 2 with Black Trapezoids and Line and Silver Triangle Pattern (Sticker) - Set 7713 (Counterpart)
|
Author: | electricbaer | Posted: | Jun 26, 2017 10:07 | Subject: | Inventory Change Request for Set 7962-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 4150pb180 White Tile, Round 2 x 2 with Orange Triangles and White Alien Characters on Black Background Pattern (Sticker) - Set 7962 (Counterpart)
|
Author: | NelisSolis | Posted: | Jun 25, 2017 05:57 | Subject: | Inventory Change Request for Set 60103-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 6 Part 2447 Trans-Black Minifig, Visor Standard (Extra)
Comments from Submitter:
Based on sealed set content
|
Author: | NelisSolis | Posted: | Jun 25, 2017 04:55 | Subject: | Inventory Change Request for Set 60103-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 50945 Black Tire 14mm D. x 6mm Solid Smooth (Extra)
Comments from Submitter:
Based on 3x sealed set contents
|
|
Author: | NelisSolis | Posted: | Jun 25, 2017 04:54 | Subject: | Inventory Change Request for Set 60103-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 194cx2 Yellow Minifig, Utensil Hose Nozzle Simple with 35L Black String (Extra)
* Add 1 Part 4265c Yellow Technic Bush 1/2 Smooth (Extra)
* Add 2 Part 98138 Trans-Yellow Tile, Round 1 x 1 (Extra)
* Add 3 Part 3024 Trans-Red Plate 1 x 1 (Extra)
* Add 2 Part 3070b Trans-Red Tile 1 x 1 with Groove (Extra)
* Add 2 Part 98138 Trans-Red Tile, Round 1 x 1 (Extra)
* Add 3 Part 3024 Trans-Green Plate 1 x 1 (Extra)
* Add 1 Part 3070b Trans-Green Tile 1 x 1 with Groove (Extra)
* Add 1 Part 98138 Trans-Green Tile, Round 1 x 1 (Extra)
* Add 2 Part 54200 Trans-Light Blue Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Trans-Orange Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 54200 Red Slope 30 1 x 1 x 2/3 (Extra)
* Add 4 Part 3024 White Plate 1 x 1 (Extra)
* Add 1 Part 98138 Light Bluish Gray Tile, Round 1 x 1 (Extra)
* Add 1 Part 30170 Dark Bluish Gray Minifig, Visor Goggles (Extra)
* Add 1 Part 3024 Black Plate 1 x 1 (Extra)
* Add 3 Part 59895 Black Tire 14mm D. x 4mm Smooth Small Single - New Style - with Number Molded on Side (Extra)
Comments from Submitter:
Extra items, based on sealed set content (previous inventory was probably based on parts list only).
|
|
Author: | Miro78 | Posted: | Jun 24, 2017 08:42 | Subject: | Re: Electronic delivery need for instant checkout | Viewed: | 35 times | Topic: | Suggestions | |
|
| In Suggestions, paulvdb writes:
| In Suggestions, M.Boss writes:
| In Suggestions, Miro78 writes:
| With instant checkout looming around the corner, I would like to have the option
for my buyers to be able to use the instant checkout option when purchasing my
electronically delivered custom model instructions.
However, at the moment, I cannot differentiate these electronic instructions
from actual paper instructions. I am not allowed to set the weight to zero grams
or selecting a checkbox that these are electronic. How will this be handled during
instant checkout with causing some sort of error?
Please allow for an option for sellers of custom instructions to be able to allow
instant checkout.
There are other sellers who use Bricklink for selling these and would benefit
from this implementation. It would also cause less issues and confusion if this
is properly handled. Lastly, this will draw more sellers of custom instructions
to sell through Bricklink instead of other venues.
Thank you for the consideration.
Miro
|
I went into the preview and made a shipping method with no cost, and made a note
for people only buying digital instructions to use it. It would be better if
we could designate certain items to only use certain shipping methods. You can
go see what I did by going to my store in the preview site and buying instructions.
M.Boss
|
But that shipping method is not limited only to instructions. Buyers can also
select it if they buy items that need to be shipped. I just checked your store
and it was the first listed and automatically selected shipping method. So buyers
will easily accidentally select it if they're not paying attention and just
quickly want to check out.
|
Thank you both for the input. That is exactly the point of my suggestion. I feel
that BL team needs to create a an electronic shipping option that won't allow
physical items to be checked out. In addition, the electronic items need to be
differentiated from physical items, either via a new category or weight. Currently
weight of zero grams is not allowed.
Miro
|
|
Author: | gumboot | Posted: | Jun 24, 2017 03:22 | Subject: | Re: Classic Wanted List Unavailable on June 5th | Viewed: | 44 times | Topic: | Suggestions | |
|
| A major flaw with the new Part Out feature of the Wanted List is that the order
of the parts displayed is not adjustable. I usually sort by colour rather than
what ever order it currently uses.
|
|
Author: | M.Boss | Posted: | Jun 23, 2017 12:46 | Subject: | Re: Electronic delivery need for instant checkout | Viewed: | 33 times | Topic: | Suggestions | |
|
| In Suggestions, paulvdb writes:
| In Suggestions, M.Boss writes:
| In Suggestions, Miro78 writes:
| With instant checkout looming around the corner, I would like to have the option
for my buyers to be able to use the instant checkout option when purchasing my
electronically delivered custom model instructions.
However, at the moment, I cannot differentiate these electronic instructions
from actual paper instructions. I am not allowed to set the weight to zero grams
or selecting a checkbox that these are electronic. How will this be handled during
instant checkout with causing some sort of error?
Please allow for an option for sellers of custom instructions to be able to allow
instant checkout.
There are other sellers who use Bricklink for selling these and would benefit
from this implementation. It would also cause less issues and confusion if this
is properly handled. Lastly, this will draw more sellers of custom instructions
to sell through Bricklink instead of other venues.
Thank you for the consideration.
Miro
|
I went into the preview and made a shipping method with no cost, and made a note
for people only buying digital instructions to use it. It would be better if
we could designate certain items to only use certain shipping methods. You can
go see what I did by going to my store in the preview site and buying instructions.
M.Boss
|
But that shipping method is not limited only to instructions. Buyers can also
select it if they buy items that need to be shipped. I just checked your store
and it was the first listed and automatically selected shipping method. So buyers
will easily accidentally select it if they're not paying attention and just
quickly want to check out.
|
Yes that is the problem with a shipping method like that.
|
|
Author: | paulvdb | Posted: | Jun 23, 2017 12:16 | Subject: | Re: Electronic delivery need for instant checkout | Viewed: | 29 times | Topic: | Suggestions | |
|
| In Suggestions, M.Boss writes:
| In Suggestions, Miro78 writes:
| With instant checkout looming around the corner, I would like to have the option
for my buyers to be able to use the instant checkout option when purchasing my
electronically delivered custom model instructions.
However, at the moment, I cannot differentiate these electronic instructions
from actual paper instructions. I am not allowed to set the weight to zero grams
or selecting a checkbox that these are electronic. How will this be handled during
instant checkout with causing some sort of error?
Please allow for an option for sellers of custom instructions to be able to allow
instant checkout.
There are other sellers who use Bricklink for selling these and would benefit
from this implementation. It would also cause less issues and confusion if this
is properly handled. Lastly, this will draw more sellers of custom instructions
to sell through Bricklink instead of other venues.
Thank you for the consideration.
Miro
|
I went into the preview and made a shipping method with no cost, and made a note
for people only buying digital instructions to use it. It would be better if
we could designate certain items to only use certain shipping methods. You can
go see what I did by going to my store in the preview site and buying instructions.
M.Boss
|
But that shipping method is not limited only to instructions. Buyers can also
select it if they buy items that need to be shipped. I just checked your store
and it was the first listed and automatically selected shipping method. So buyers
will easily accidentally select it if they're not paying attention and just
quickly want to check out.
|
|
Author: | M.Boss | Posted: | Jun 23, 2017 12:05 | Subject: | Re: Electronic delivery need for instant checkout | Viewed: | 38 times | Topic: | Suggestions | |
|
| In Suggestions, Miro78 writes:
| With instant checkout looming around the corner, I would like to have the option
for my buyers to be able to use the instant checkout option when purchasing my
electronically delivered custom model instructions.
However, at the moment, I cannot differentiate these electronic instructions
from actual paper instructions. I am not allowed to set the weight to zero grams
or selecting a checkbox that these are electronic. How will this be handled during
instant checkout with causing some sort of error?
Please allow for an option for sellers of custom instructions to be able to allow
instant checkout.
There are other sellers who use Bricklink for selling these and would benefit
from this implementation. It would also cause less issues and confusion if this
is properly handled. Lastly, this will draw more sellers of custom instructions
to sell through Bricklink instead of other venues.
Thank you for the consideration.
Miro
|
I went into the preview and made a shipping method with no cost, and made a note
for people only buying digital instructions to use it. It would be better if
we could designate certain items to only use certain shipping methods. You can
go see what I did by going to my store in the preview site and buying instructions.
M.Boss
|
|
Author: | Miro78 | Posted: | Jun 23, 2017 10:28 | Subject: | Electronic delivery need for instant checkout | Viewed: | 130 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| With instant checkout looming around the corner, I would like to have the option
for my buyers to be able to use the instant checkout option when purchasing my
electronically delivered custom model instructions.
However, at the moment, I cannot differentiate these electronic instructions
from actual paper instructions. I am not allowed to set the weight to zero grams
or selecting a checkbox that these are electronic. How will this be handled during
instant checkout with causing some sort of error?
Please allow for an option for sellers of custom instructions to be able to allow
instant checkout.
There are other sellers who use Bricklink for selling these and would benefit
from this implementation. It would also cause less issues and confusion if this
is properly handled. Lastly, this will draw more sellers of custom instructions
to sell through Bricklink instead of other venues.
Thank you for the consideration.
Miro
|
|
Author: | Brickwilbo | Posted: | Jun 23, 2017 04:19 | Subject: | Re: separate picking list by New and Used | Viewed: | 23 times | Topic: | Suggestions | |
|
| In Suggestions, RubyGirl writes:
| In Suggestions, Brickwilbo writes:
| In Suggestions, logansbricks writes:
| Howdy guys! I was wondering if it is possible to have our picking list separated
into New and Used But still be in order of item number? For example, all the
new would be at the top of the list but be in the correct item number order,
then the used (in correct order) would be after the new. It would be soooo helpful
since the New and Used are obviously in different places in our physical stores.
Yikes, dare I say this BUT, that is how Brickowl does it and it is just much,
much easier to pull.
thanks for lending an ear
sherry
|
Change the sorting below the order details page
|
I know what you mean OP. From where I sit, there is no option for "condition,
then number". For myself I would love "condition, remarks, number" .
|
https://www.bricklink.com/orderSettings.asp
| I also notice that my spreadsheet doesn't sort 123 and 123a in the right
order so I have to take an extra step to make that work.
|
|
|
Author: | Rob_and_Shelagh | Posted: | Jun 23, 2017 03:20 | Subject: | Re: separate picking list by New and Used | Viewed: | 32 times | Topic: | Suggestions | |
|
| In Suggestions, logansbricks writes:
| Howdy guys! I was wondering if it is possible to have our picking list separated
into New and Used But still be in order of item number? For example, all the
new would be at the top of the list but be in the correct item number order,
then the used (in correct order) would be after the new. It would be soooo helpful
since the New and Used are obviously in different places in our physical stores.
Yikes, dare I say this BUT, that is how Brickowl does it and it is just much,
much easier to pull.
thanks for lending an ear
sherry
|
We do it using sort by remarks. Remarks are used for stock locations for each
part. For us used parts get alpha locations, new get numerical. Our picking list
(order) is sorted by used 1st in order of location then new in order of location.
We follow that with our picking cart and picking an order is just one lap of
the storage locations. You can store any part anywhere in the system (except
used have to go in used locations, new in new locations but that is good practice
to avoid crossover anyway).
Robert
|
|
Author: | RubyGirl | Posted: | Jun 22, 2017 21:32 | Subject: | Re: separate picking list by New and Used | Viewed: | 31 times | Topic: | Suggestions | |
|
| In Suggestions, Brickwilbo writes:
| In Suggestions, logansbricks writes:
| Howdy guys! I was wondering if it is possible to have our picking list separated
into New and Used But still be in order of item number? For example, all the
new would be at the top of the list but be in the correct item number order,
then the used (in correct order) would be after the new. It would be soooo helpful
since the New and Used are obviously in different places in our physical stores.
Yikes, dare I say this BUT, that is how Brickowl does it and it is just much,
much easier to pull.
thanks for lending an ear
sherry
|
Change the sorting below the order details page
|
I know what you mean OP. From where I sit, there is no option for "condition,
then number". For myself I would love "condition, remarks, number" .
I also notice that my spreadsheet doesn't sort 123 and 123a in the right
order so I have to take an extra step to make that work.
|
|
Author: | calsbricks | Posted: | Jun 22, 2017 10:57 | Subject: | Inventory Change Request for Set 21019-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 8 Part 3794b Light Bluish Gray Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate)
Comments from Submitter:
2 sets parted out today both had the b variant.
|
|
Author: | Brickwilbo | Posted: | Jun 22, 2017 10:40 | Subject: | Re: separate picking list by New and Used | Viewed: | 34 times | Topic: | Suggestions | |
|
| In Suggestions, logansbricks writes:
| Howdy guys! I was wondering if it is possible to have our picking list separated
into New and Used But still be in order of item number? For example, all the
new would be at the top of the list but be in the correct item number order,
then the used (in correct order) would be after the new. It would be soooo helpful
since the New and Used are obviously in different places in our physical stores.
Yikes, dare I say this BUT, that is how Brickowl does it and it is just much,
much easier to pull.
thanks for lending an ear
sherry
|
Change the sorting below the order details page.
|
|
Author: | ShipABrick | Posted: | Jun 22, 2017 10:39 | Subject: | separate picking list by New and Used | Viewed: | 91 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Howdy guys! I was wondering if it is possible to have our picking list separated
into New and Used But still be in order of item number? For example, all the
new would be at the top of the list but be in the correct item number order,
then the used (in correct order) would be after the new. It would be soooo helpful
since the New and Used are obviously in different places in our physical stores.
Yikes, dare I say this BUT, that is how Brickowl does it and it is just much,
much easier to pull.
thanks for lending an ear
sherry
|
|
Author: | StormChaser | Posted: | Jun 21, 2017 18:28 | Subject: | Re: Inventory Change Request for Set 9256-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, taxan writes:
| And instead that Inventory Admin do this:
1) Swap the current picture for 9256-1 with the old one that you found.
2) Change the release year to 1991 for that set.
3) Create a 9256-2 and add those changes you requested in to that one, with the
current picture. And set the year to 1996 for it.
|
Certainly not a bad suggestion, but the Dacta/Education sets were changed with
such regularity that creating new sets in the BrickLink catalog for every variation
doesn't strike me as the most efficient approach. In the case of this set,
the only part changes appear to involve 4 pieces (two of which are easily handled
by listing them as alternates).
I have added new sets in the past in extreme cases such as this one which would
have included 100+ alternates:
I don't believe that the minor differences for 9256 justify an additional
listing, but I'm not sure how the two new parts would be added (they're
not alternates, counterparts, etc.). So I'm waiting to hear from the inventory
administrator.
|
|
Author: | taxan | Posted: | Jun 21, 2017 18:19 | Subject: | Re: Inventory Change Request for Set 9256-1 | Viewed: | 28 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, StormChaser writes:
| Please make changes to the following inventory:
|
Just found this picture of original set which Admin used for inventory (reported
to be from 1991). Notice that red/blue 4744 bricks do not appear to be present
- not sure how you want to handle their later inclusion.
|
I suggest that you cancel the change request.
And instead that Inventory Admin do this:
1) Swap the current picture for 9256-1 with the old one that you found.
2) Change the release year to 1991 for that set.
3) Create a 9256-2 and add those changes you requested in to that one, with the
current picture. And set the year to 1996 for it.
Have a nice day.
taxan
|
|
Author: | skikyssing | Posted: | Jun 21, 2017 15:26 | Subject: | Inventory Change Request for Set 41002-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 21459 Flat Silver Minifig, Weapon Sword, Shamshir (Square Guard) with Capped Pommel and Holes in Crossguard and Blade
Comments from Submitter:
This is a big mistake of Lego.
On the box, you see that the sword is a 30173b, but when you open the box there are only two 21459.
I parted out around 15 boxes of 41002 for some months ago. I just got problems with people who ordered some 30173b from my store, but I couldn't give them what they wanted, because I just had sword 21459!
I had another box of 41002, I had to check if Lego did a mistake... And they did!! I have some pictures where you see that the swords into the bags are different from the pictures on the box!
I didn't make it to change those pieces, just do it for me. I can send some pictures if you need them! Take contact at felers@hotmail.com
|
|
Author: | maggiec | Posted: | Jun 21, 2017 13:04 | Subject: | Inventory Change Request for Set 8117-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 3068bpb0405 Black Tile 2 x 2 with Black Robot Face and Yellow Splatter Pattern (Sticker) - Set 8117 (Counterpart)
Comments from Submitter:
Sticker appears to be misapplied and properly belongs on the Trans-Black panel
Thanks!
|
|
Author: | electricbaer | Posted: | Jun 21, 2017 10:25 | Subject: | Inventory Change Request for Set 8117-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 2466pb04 Trans-Black Panel 3 x 2 x 6 with Black Alien Robot Face, Yellow Splatter and 'EX043RZH' Pattern (Stickers) - Set 8117 (Counterpart)
|
|
Author: | therobo | Posted: | Jun 21, 2017 07:12 | Subject: | Inventory Change Request for Set 8185-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4070pb03 Red Brick, Modified 1 x 1 with Italian Flag Pattern on Both Sides (Stickers) - Sets 8168 / 8185 (Counterpart)
* Add 1 Part 61678pb097L Red Slope, Curved 4 x 1 No Studs with Shell Logo, 'acer', 'MAHLE', 'OMR', 'SKF' and 'brembo' Pattern Model Left Side (Sticker) - Sets 8168 / 8185 (Counterpart)
* Add 1 Part 61678pb097R Red Slope, Curved 4 x 1 No Studs with Shell Logo, 'acer', 'MAHLE', 'OMR', 'SKF' and 'brembo' Pattern Model Right Side (Sticker) - Sets 8168 / 8185 (Counterpart)
* Add 1 Part 3069bpb562 Red Tile 1 x 2 with Black Camera Pattern (Sticker) - Sets 8168 / 8185 (Counterpart)
* Add 1 Part 4864bpb38L Red Panel 1 x 2 x 2 with Shell V-Power, Bridgestone, AMD and Alice Logos Pattern Model Left Side (Sticker) - Sets 8168 / 8185 (Counterpart)
* Add 2 Part 54200pb002 Red Slope 30 1 x 1 x 2/3 with Red and Black 'B' Pattern (Sticker) - Sets 8168 / 8185 (Counterpart)
* Add 1 Part 3069bpb562 Red Tile 1 x 2 with Black Camera Pattern (Sticker) - Sets 8168 / 8185 (Counterpart)
* Add 1 Part 3069bpb565 Red Tile 1 x 2 with Black Racer Steering Wheel Edge and Red 'Z' in White Circle Pattern (Sticker) - Sets 8168 / 8185 (Counterpart)
* Add 1 Part 6636pb148 Red Tile 1 x 6 with White 'V-Power' and Shell Logo on Both Ends Pattern (Stickers) - Sets 8168 / 8185 (Counterpart)
|
|
Author: | StormChaser | Posted: | Jun 21, 2017 00:51 | Subject: | Re: Inventory Change Request for Set 9256-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| Please make changes to the following inventory:
|
Just found this picture of original set which Admin used for inventory (reported
to be from 1991). Notice that red/blue 4744 bricks do not appear to be present
- not sure how you want to handle their later inclusion.
|
|
|
Author: | StormChaser | Posted: | Jun 21, 2017 00:39 | Subject: | Re: Inventory Change Request for Set 9256-1 | Viewed: | 17 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| Please make changes to the following inventory:
|
BTW, original version of set almost certainly released prior to 1996. I changed
YOR from 2000 to 1996 because I found the set in a catalog from '96, but
I'm thinking the original version was released in the early 90s when the
finger puppets were still in sets. Based on my incomplete catalog collection,
I would say '91 or '92 is the correct YOR.
|
|
Author: | StormChaser | Posted: | Jun 21, 2017 00:27 | Subject: | Re: Inventory Change Request for Set 9256-1 | Viewed: | 14 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| Please make changes to the following inventory:
|
|
|
|
Author: | StormChaser | Posted: | Jun 21, 2017 00:26 | Subject: | Inventory Change Request for Set 9256-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 4744 Blue Brick, Modified 2 x 4 x 2 Double Curved Top
* Add 2 Part 4744 Red Brick, Modified 2 x 4 x 2 Double Curved Top
* Add 4 Part 4130c02 Red Door Frame 2 x 4 x 5 with White Door
* Add 8 Part 4132c04 Red Window 2 x 4 x 3 Frame with White Pane
* Delete 8 Part 4133 White Window 2 x 4 x 3 Pane
* Delete 4 Part 4131 White Door 1 x 4 x 5
* Delete 4 Part 4130 Red Door Frame 2 x 4 x 5
* Delete 8 Part 4132 Red Window 2 x 4 x 3 Frame
* Add 2 Part 4744px3 Red Brick, Modified 2 x 4 x 2 Double Curved Top with Yellow Face, Freckles and Ears Pattern (Alternate) (match ID 1)
* Add 2 Part 4744px9 Black Brick, Modified 2 x 4 x 2 Double Curved Top with Yellow Face, Simple Pattern (Alternate) (match ID 2)
* Change 2 Minifig 4224c01 Basic Figure Finger Puppet Female (bfp001) {match ID 0 to 1}
* Change 2 Minifig 4224c02 Basic Figure Finger Puppet Male (bfp002) {match ID 0 to 2}
Comments from Submitter:
Some changes to the set inventory just for fun. Picture following.
|
|
Author: | QuarkyBricks | Posted: | Jun 20, 2017 14:37 | Subject: | Re: Upgrade Stripe intergration | Viewed: | 40 times | Topic: | Suggestions | |
|
| Another reason that this is important is that many online order/shipping management
programs sync with Stripe Relay and not just payments processed through Stripe.
This means that orders paid for with Stripe have to have shipping labels created
manually.
Good suggestion!
|
|
Author: | welo999 | Posted: | Jun 20, 2017 11:22 | Subject: | Inventory Change Request for Set 75158-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 75158stk01a (Not Applicable) Sticker for Set 75158 - International Version - (27085/6155259) (Alternate) (match ID 1)
* Change 1 Part (Not Applicable) 75158stk01b Sticker for Set 75158 - North American Version - (27086/6155260) {match ID 0 to 1}
|
|
Author: | Cob | Posted: | Jun 19, 2017 12:11 | Subject: | Upgrade Stripe intergration | Viewed: | 88 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| With instant checkout coming in the near future, please upgrade the Stripe integration
to perform validation checks between the buyer address and the credit card records.
Also upgrade Stripe so that API is used versus only submitting the user name.
Thank you,
Jacob
|
Author: | electricbaer | Posted: | Jun 19, 2017 10:49 | Subject: | Inventory Change Request for Set 75038-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 87079pb418 Dark Bluish Gray Tile 2 x 4 with Control Panels and Control Sticks Pattern (Sticker) - Set 75038 (Counterpart)
|
Author: | StephCad | Posted: | Jun 19, 2017 08:44 | Subject: | Re: Classic Wanted List Unavailable on June 5th | Viewed: | 43 times | Topic: | Suggestions | |
|
| Hello,
If it is possible can you please keep the old version available ? I can't
get used to the new one...
Thank you so much for your work and for this marvellous website !!!
Best Regards,
Stéphanie
|
Author: | axaday | Posted: | Jun 18, 2017 19:50 | Subject: | Inventory Change Request for Set 76072-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4624 Light Bluish Gray Wheel 8mm D. x 6mm (Extra)
|
|
Author: | drg7949 | Posted: | Jun 18, 2017 18:44 | Subject: | Re: Classic Wanted List Unavailable on June 5th | Viewed: | 58 times | Topic: | Suggestions | |
|
| I'll pile on, as well...
We appreciate all of the hard work on the new design, but there is certain functionality
that is lacking, or at least less obvious. I always start with the new design,
but find myself going back to the Classic view every time.
Quick example: in the Classic view, if I added part #61190d to my WL, and wanted
to change it to 61190e (or change from one color to another), I could do that
easily by editing the record itself. In the new version, I don't see a way
other than to add the new item and remove the old. Is it that a big deal? No,
but it's indicative.
Please keep the classic view!
Darren
In Administrative, Admin_Jaclyn writes:
| Hello Everyone,
In June of last year, we introduced a new Wanted List upgrade. This upgrade came
with a newly-designed buying experience which focused on the necessity to compare
and plan out multiple carts at once, as well as make it easier to manage multiple
lists.
Since BrickLink's Wanted List is a core feature for most users, we currently
provide the classic version for members to use as a backup in case there are
glitches with the new version. This is intended to be a temporary solution.
The classic version of the Wanted List feature will become unavailable on
June 5, 2017. At this point, we have ensured that the new version of the
Wanted List covers all desired functionality (plus more) from the classic version.
If you have any issues with the new version, please let us know as soon as possible.
Thank you for the continued support, bug reports, and helpful feedback as we
continue to roll out important changes.
Sincerely,
Jaclyn
BrickLink Customer Support
|
|
|
Author: | VVV | Posted: | Jun 18, 2017 18:17 | Subject: | Inventory Change Request for Set 6677-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 4081b Yellow Plate, Modified 1 x 1 with Clip Light - Thick Ring (Alternate)
Comments from Submitter:
I have two of these set with 4 4081b and have no 4081a in my entire lego collection of over 400 sets from the 80s, So there must have been this version also
|
|
Author: | bb69656 | Posted: | Jun 18, 2017 10:39 | Subject: | Bigger Pictures | Viewed: | 96 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Now that everything minifigure is dual sided, the pictures have effectively halved
in size. Also, the description on the page is large, and picture small (in a
store).
Ebay has gone to bigger pictures (free) which tends to prove they work. Can
we allocate more space to pictures?
|
|
Author: | normann1974 | Posted: | Jun 18, 2017 08:14 | Subject: | Inventory Change Request for Set 6881-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 4276 Black Hinge Plate 1 x 2 with 2 Fingers (Alternate) (match ID 2)
* Add 2 Part 4275 Black Hinge Plate 1 x 2 with 3 Fingers (Alternate) (match ID 3)
* Change 2 Part Black 4276a Hinge Plate 1 x 2 with 2 Fingers and Solid Studs {match ID 0 to 2}
* Change 2 Part Black 4275a Hinge Plate 1 x 2 with 3 Fingers and Solid Studs {match ID 0 to 3}
Comments from Submitter:
I have just sorted my collection of bricks from childhood sets. I have 4 each of 4275 and 4276 (hollow stud) and none with solid stud. I have two sets where these belong to: 6881 (this) and 6893. Therefore I suggest this update.
|
|
Author: | normann1974 | Posted: | Jun 18, 2017 08:12 | Subject: | Re: Inventory Change Request for Set 6881-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, normann1974 writes:
| Please make changes to the following inventory:
* Add 2 Part 4276 Black Hinge Plate 1 x 2 with 2 Fingers (Alternate) (match ID 1)
* Add 2 Part 4275 Black Hinge Plate 1 x 2 with 3 Fingers (Alternate) (match ID 2)
* Change 2 Part Black 4276a Hinge Plate 1 x 2 with 2 Fingers and Solid Studs {match ID 0 to 1}
* Change 2 Part Black 4275a Hinge Plate 1 x 2 with 3 Fingers and Solid Studs {match ID 0 to 2}
Comments from Submitter:
I have just sorted my collection of bricks from childhood sets. I have 4 each of 4275 and 4276 (hollow stud) and none with solid stud. I have two sets where these belong to: 6881 (this) and 6893. Therefore I suggest this update.
|
Please cancel this update. There's already an item with match ID 1. I'll
make a new request where I've fixed the match IDs.
|
|
Author: | Osophy | Posted: | Jun 17, 2017 00:34 | Subject: | Inventory Change Request for Set 60102-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3024 Black Plate 1 x 1 (Extra)
* Add 1 Part 59895 Black Tire 14mm D. x 4mm Smooth Small Single - New Style - with Number Molded on Side (Extra)
* Add 1 Part 3070b Dark Tan Tile 1 x 1 with Groove (Extra)
* Add 1 Part 4624 Light Bluish Gray Wheel 8mm D. x 6mm (Extra)
* Add 1 Part 54200 Trans-Clear Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 3070b Trans-Clear Tile 1 x 1 with Groove (Extra)
* Add 1 Part 98138 Trans-Clear Tile, Round 1 x 1 (Extra)
* Add 1 Part 98138 Trans-Green Tile, Round 1 x 1 (Extra)
* Add 1 Part 3024 Trans-Orange Plate 1 x 1 (Extra)
* Add 1 Part 4073 Trans-Orange Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 54200 Trans-Red Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 98138 Trans-Red Tile, Round 1 x 1 (Extra)
* Add 1 Part 3070b White Tile 1 x 1 with Groove (Extra)
Comments from Submitter:
This set had 13 extras as listed not in the brick link Inventory.
|
|
Author: | normann1974 | Posted: | Jun 16, 2017 17:11 | Subject: | Re: Inventory Change Request for Set 6872-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| | This means I need to add alternate parts to the later sets (6872 and 6055). This is one of them.
|
Set 6055 already had the alternates, so there's actually only this inventory
request, not two.
|
|
Author: | normann1974 | Posted: | Jun 16, 2017 17:10 | Subject: | Inventory Change Request for Set 6872-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 4276 Blue Hinge Plate 1 x 2 with 2 Fingers (Alternate) (match ID 1)
* Add 2 Part 4275 Blue Hinge Plate 1 x 2 with 3 Fingers (Alternate) (match ID 2)
* Change 2 Part Blue 4276a Hinge Plate 1 x 2 with 2 Fingers and Solid Studs {match ID 0 to 1}
* Change 2 Part Blue 4275a Hinge Plate 1 x 2 with 3 Fingers and Solid Studs {match ID 0 to 2}
Comments from Submitter:
I have just sorted my collection of bricks from childhood sets. I have the following versions of 2x1 hinge plates in Light Gray and Blue: §§§
4276 (2 finger hollow stud): 4x blue §§§
4276a (2 finger solid stud): 1x blue and 2x light gray §§§
4275 (3 finger hollow stud): 4x blue §§§
4275a (3 finger solid stud): 3x blue §§§
They all belong to the three sets 6844 (1983), 6928 (1984), 6872 (1985) and 6055 (1985). §§§
The two light gray 4276a are from set 6928, therefore two of the blue 4275a must also be from this set.
This means that the one 4275a and one 4276a that are left must be from set 6844 which only has one of each (the other two sets left have two each).
This means that the 4 blue 4275 and 4 blue 4276 left must be from sets 6872 and 6055. §§§
This reasoning also aligns with the fact that sets 6844 and 6928 are the two oldest sets and therefore ought to have the solid stud versions. §§§
This means I need to add alternate parts to the later sets (6872 and 6055). This is one of them. I'm not sure that BL will allow me to post line breaks in this message, so I've used §§§ to indicate where lines end.
|
|
Author: | normann1974 | Posted: | Jun 16, 2017 16:43 | Subject: | Inventory Change Request for Set 6881-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 4276 Black Hinge Plate 1 x 2 with 2 Fingers (Alternate) (match ID 1)
* Add 2 Part 4275 Black Hinge Plate 1 x 2 with 3 Fingers (Alternate) (match ID 2)
* Change 2 Part Black 4276a Hinge Plate 1 x 2 with 2 Fingers and Solid Studs {match ID 0 to 1}
* Change 2 Part Black 4275a Hinge Plate 1 x 2 with 3 Fingers and Solid Studs {match ID 0 to 2}
Comments from Submitter:
I have just sorted my collection of bricks from childhood sets. I have 4 each of 4275 and 4276 (hollow stud) and none with solid stud. I have two sets where these belong to: 6881 (this) and 6893. Therefore I suggest this update.
|
|
Author: | Hurt | Posted: | Jun 16, 2017 15:33 | Subject: | Re: Select all in want list search buying. | Viewed: | 24 times | Topic: | Suggestions | |
|
| What does the current "Status: Already Exists" mean? Where can I find this functionality?
In Suggestions, j7r7o7c7k7 writes:
| When you go to buy items in your want lists, it ask you to select the want lists
you want to buy from. Well I have like 60+ lists (one for each set) so I have
to click ever single one each time I want to run a search to find items. But
there is a deselect button there so I can unclick all in one shot, but can we
add a select all button?? A small suggestion, but try clicking 60+ times before
you even start your search lol. Thanks
|
|
|
Author: | Hurt | Posted: | Jun 16, 2017 15:31 | Subject: | Re: Select all in want list search buying. | Viewed: | 17 times | Topic: | Suggestions | |
|
| Yes, this needs to be implemented. I do have a separate wanted list for every
set as well.
In Suggestions, j7r7o7c7k7 writes:
| When you go to buy items in your want lists, it ask you to select the want lists
you want to buy from. Well I have like 60+ lists (one for each set) so I have
to click ever single one each time I want to run a search to find items. But
there is a deselect button there so I can unclick all in one shot, but can we
add a select all button?? A small suggestion, but try clicking 60+ times before
you even start your search lol. Thanks
|
|
|
Author: | SylvainLS | Posted: | Jun 16, 2017 15:24 | Subject: | Re: Wanted List - Buy - Show Price & Condition | Viewed: | 33 times | Topic: | Suggestions | |
|
| In Suggestions, HPBrickhead writes:
| Hi, when using the BUY NOW feature of the wanted list, it shows me the stores
but not:
a) condition of the item (new / used)
b) what the price is in each store
|
b) is available if you open a WL (just to look at it), and click “More Options”
and then “Items for Sale: Show” and “Apply” (beware the default sort “by store
name”).
(It’s like in the Old/Classic WL’s feature to show stores. “Buy” works like “By
Shop,” where prices and items weren’t shown either.)
| Instead I see a "minimum purchase" total.
So you have to go to each store and check, or to the price guide, which doesn't
make a quick buy that quick.
|
If you “select” a store, a dialog appears with all the items in the store, their
prices and conditions. You can then cancel or actually select the store.
(You can also just click in the store’s line, it will show what items in your
WLs are available in the store, and in what quantities, in the item list on the
left by outlining the pictures.)
You still have to check the price guide yourself though.
There was a feature that gave a “percentage relative to the price guide,” in
red for overpriced items, in green for better priced items. It was removed. It
didn’t work well though.
“We?” No. BrickLink? I doubt they would.
|
|
Author: | Brickwilbo | Posted: | Jun 16, 2017 15:10 | Subject: | Re: Wanted List - Buy - Show Price & Condition | Viewed: | 28 times | Topic: | Suggestions | |
|
| In Suggestions, HPBrickhead writes:
| Hi, when using the BUY NOW feature of the wanted list, it shows me the stores
but not:
a) condition of the item (new / used)
b) what the price is in each store
Instead I see a "minimum purchase" total.
So you have to go to each store and check, or to the price guide, which doesn't
make a quick buy that quick.
Could we change this?
|
Yes please.
This has been mentioned multiple times and should already have been added.
They want us to use the Auto-Finder or Buy Now feature.
|
|
Author: | bb69656 | Posted: | Jun 16, 2017 15:04 | Subject: | Wanted List - Buy - Show Price & Condition | Viewed: | 62 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Hi, when using the BUY NOW feature of the wanted list, it shows me the stores
but not:
a) condition of the item (new / used)
b) what the price is in each store
Instead I see a "minimum purchase" total.
So you have to go to each store and check, or to the price guide, which doesn't
make a quick buy that quick.
Could we change this?
|
|
Author: | shawnxyz | Posted: | Jun 16, 2017 12:46 | Subject: | Show a total on "Orders" Page? | Viewed: | 53 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| I'd like to know what the sum of all my 15 current orders are - so I'd
like a "total" section on the orders page.
|
|
Author: | StormChaser | Posted: | Jun 16, 2017 12:24 | Subject: | Inventory Change Request for Set 9364-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Gear bin03 Bright Green Dacta Storage Bin Medium (Alternate) (match ID 1)
* Add 1 Gear 71082 Trans-Clear Dacta Storage Bin Lid (Fits with bin01 and bin03) (Alternate) (match ID 1)
* Change 1 Gear Red bin07 Dacta Storage Bin 16" x 12.5" x 4.5" {match ID 0 to 1}
Comments from Submitter:
Seen in set for sale. Also, BrickLink set picture. However, BrickLink original box photo shows red bin.
|
|
Author: | dmaster.hu | Posted: | Jun 16, 2017 04:23 | Subject: | Inventory Change Request for Set 41016-3 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3794 Light Bluish Gray Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate) (match ID 1)
* Change 1 Part Light Bluish Gray 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {match ID 0 to 1}
|
|
Author: | StormChaser | Posted: | Jun 16, 2017 03:32 | Subject: | Inventory Change Request for Set 5003223-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 15038c03 Light Bluish Gray Wheel 56mm D. x 34mm Technic Racing Medium, 6 Pin Holes with Black Tire 94.3 x 38 R (15038 / 92912) (Counterpart)
|
|
Author: | StormChaser | Posted: | Jun 16, 2017 03:25 | Subject: | Inventory Change Request for Set 5003191-1 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 5 Part 55982c05 Light Bluish Gray Wheel 18mm D. x 14mm with Axle Hole, Fake Bolts and Shallow Spokes with Black Tire 30.4 x 14 Offset Tread Band Around Center of Tread (55982 / 92402) (Counterpart)
* Add 5 Part 56145c01 Light Bluish Gray Wheel 30.4mm D. x 20mm with No Pin Holes and Reinforced Rim with Black Tire 43.2 x 22 ZR (56145 / 44309) (Counterpart)
|
|
Author: | StormChaser | Posted: | Jun 16, 2017 03:08 | Subject: | Inventory Change Request for Set 5003107-1 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 88517c02 Light Bluish Gray Wheel 75mm D. x 17mm Motorcycle with Black Tire 100.6mm D. Motorcycle (88517 / 11957) (Counterpart)
|
|
Author: | StormChaser | Posted: | Jun 16, 2017 03:05 | Subject: | Inventory Change Request for Set 5003153-1 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 56908c01 Light Bluish Gray Wheel 43.2mm D. x 26mm Technic Racing Small, 6 Pin Holes with Black Tire 81.6 x 38 R Balloon (56908 / 45982) (Counterpart)
* Add 2 Part 56145c03 Black Wheel 30.4mm D. x 20mm with No Pin Holes and Reinforced Rim with Black Tire 37 x 22 ZR (56145 / 55978) (Counterpart)
|
|
Author: | StormChaser | Posted: | Jun 16, 2017 03:00 | Subject: | Inventory Change Request for Set 5003152-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 25 Part 4185c01 Light Bluish Gray Technic Wedge Belt Wheel (Pulley), with Black Technic Wedge Belt Wheel Tire (4185 / 70162) (Counterpart)
|
|
Author: | elias3 | Posted: | Jun 15, 2017 13:16 | Subject: | Inventory Change Request for Set 306-1 | Viewed: | 42 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6099p03 Light Gray Baseplate, Road 32 x 32 9-Stud Landing Pad with Yellow Circle Pattern (Alternate) (match ID 1)
* Change 1 Part Light Gray 6099px2 Baseplate, Road 32 x 32 9-Stud Landing Pad with Yellow Circle, 1-way Lines Pattern {match ID 0 to 1}
Comments from Submitter:
also this type was available (1983 version, see pictures 3 and 4 original box/cover)
|
|
Author: | StormChaser | Posted: | Jun 15, 2017 12:32 | Subject: | Inventory Change Request for Set 9122-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Gear 71093 Red Dacta Storage Bin Large
* Add 1 Gear 71094 Yellow Dacta Storage Bin Lid (Fits with 71093 and bin08)
|
|
Author: | electricbaer | Posted: | Jun 15, 2017 11:38 | Subject: | Inventory Change Request for Set 75913-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 3245cpb054 Red Brick 1 x 2 x 2 with Inside Stud Holder with Scuderia Ferrari Logo with Black Outlined Ferrrari Logo Pattern (Sticker) - Set 75913 (Counterpart)
* Add 1 Part 6111pb027L Red Brick 1 x 10 with 'infor', OIIR', 'OAKLEY', 'SKF', 'NGK SPARK PLUGS', MAGNETI MARELLI', 'brembo', IVECO' and 'OZ' Pattern (Sticker) - Set 75913 (Counterpart)
* Add 1 Part 6111pb027R Red Brick 1 x 10 with 'OZ', 'IVECO', 'brembo', 'MAGNETI MARELLI', 'NGK SPARK PLUGS', 'SKF', 'OAKLEY', 'OIIR' and 'infor' Pattern (Sticker) - Set 75913 (Counterpart)
* Add 1 Part 2465pb19L Red Brick 1 x 16 with 'FIAT', 'Santander', Shell Logo, 'KASPERSKY lab', ups Logo, 'WEICHAI', HUBLOT', 'TNT', PIRELLI', Puma Logo and 'MAHLE' Pattern (Stickers) - Set 75913 (Counterpart)
* Add 1 Part 2465pb19R Red Brick 1 x 16 with 'MAHLE' Puma Logo, 'PIRELLI', 'TNT', 'HUBLOT', 'WEICHAI', ups Logo, 'KASPERSKY lab', Shell Logo, 'Santander' and 'FIAT' Pattern (Stickers) - Set 75913 (Counterpart)
* Add 2 Part 87552pb045 Red Panel 1 x 2 x 2 with Side Supports - Hollow Studs with Shell Logo and 'V-Power', 'Santander', 'OIIR' and 'MAHLE' Pattern (Sticker) - Set 75913 (Counterpart)
* Add 1 Part 59349pb133 Red Panel 1 x 6 x 5 with Green Outlined Race Track Map Pattern on Inside (Sticker) - Set 75913 (Counterpart)
* Add 2 Part 59349pb131 Red Panel 1 x 6 x 5 with Italian Flag on Top Pattern (Sticker) - Set 75913 (Counterpart)
* Add 2 Part 59349pb132 Red Panel 1 x 6 x 5 with Scuderia Ferrari Logo Pattern (Sticker) - Set 75913 (Counterpart)
* Add 1 Part 60477pb010 Red Slope 18 4 x 1 with 'FIAT' and Puma and Scuderia Ferrari Logos Pattern on Both Sides (Stickers) - Set 75913 (Counterpart)
* Add 4 Part 54200pb084 White Slope 30 1 x 1 x 2/3 with Red Santander Logo on White Background Pattern (Sticker) - Set 75913 (Counterpart)
* Add 1 Part 54200pb085L Red Slope 30 1 x 1 x 2/3 with Shell Logo and 'V-Power' Pattern Model Left Side (Sticker) - Set 75913 (Counterpart)
* Add 1 Part 54200pb085R Red Slope 30 1 x 1 x 2/3 with Shell Logo and 'V-Power' Pattern Model Right Side (Sticker) - Set 75913 (Counterpart)
* Add 2 Part 15068pb114 Red Slope, Curved 2 x 2 No Studs with 'PIRELLI', 'FIAT', Ferrari Logo and Italian Flag Pattern (Sticker) - Set 75913 (Counterpart)
* Add 1 Part 15068pb113 Red Slope, Curved 2 x 2 No Studs with Shell Logo, 'TNT Energy Drink' and 'KASPERSKY lab' Pattern (Sticker) - Set 75913 (Counterpart)
* Add 1 Part 3068bpb1093 Black Tile 2 x 2 with Yellow Lines and 'P1', '- 4.8', '-16.9' and 'L35' on Black Background Pattern (Sticker) - Set 75913 (Counterpart)
* Add 1 Part 87079pb417 Red Tile 2 x 4 with 'STRALIS' and Scuderia Ferrari Logo Pattern (Sticker) - Set 75913 (Counterpart)
* Add 1 Part 3069bpb591 Red Tile 1 x 2 with 'WEICHAI' Pattern (Sticker) - Set 75913 (Counterpart)
|
|
Author: | bb217310 | Posted: | Jun 15, 2017 10:32 | Subject: | Re: Classic Wanted List Unavailable on June 5th | Viewed: | 50 times | Topic: | Suggestions | |
|
| I prefer clasic wanted list.
Thanks. If you can show two options, is beetter.
|
Author: | saosivert | Posted: | Jun 15, 2017 06:11 | Subject: | Inventory Change Request for Set 7703-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Sand Blue {3049 Slope 45 2 x 1 Double / Inverted - Undetermined Underside to 3049c Slope 45 2 x 1 Double / Inverted - with Bottom Stud Holder}
|
|
Author: | BLUSER_116069 | Posted: | Jun 14, 2017 23:32 | Subject: | Inventory Change Request for Set 8460-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {11 to 10} Part Light Gray 3647 Technic, Gear 8 Tooth Type 1
Comments from Submitter:
Hi Bricklink, the instructions list only 10x Gear 8 (Tooth Type 1) for the main model, and only 1 of those is used in the B-model. The 11th one in the inventory may be a spare but doesn't seem to be required for the main model, and my brand new kit only has 10x
|
|
Author: | bb69656 | Posted: | Jun 14, 2017 17:50 | Subject: | Re: Remove catalog policy - dec. hip&leg restict. | Viewed: | 39 times | Topic: | Suggestions | |
|
| In Suggestions, LordSkylark writes:
| Please revise the catalog policy by removing this restriction to the catalog
from:
"Guidelines for adding items to the catalog:", Section 8, on this page:
http://www.bricklink.com/help.asp?helpID=71
"Decorated Minifig Hips and Legs - Submission of entries for the separate component
parts of a printed Minifig, Legs Assembly item is currently discouraged except
under certain circumstances. Those are 1) an administrative judgment that the
minifig involved is significant in some way, and 2) the general design of the
minifig involved is produced in both printed and unprinted legs assembly versions."
Please do this so that all decorated hips and legs may be added and sold individually
on bricklink without restriction.
(NOTE: This is not a catalog request, or anything of the sort -- this is
a post which is to be voted on by the community and for the head administration
to see in the SUGGESTIONS for them to possibly implement.)
Thank you for your consideration,
Andy
|
I voted yes bc some hips are good for customs but legs too ornate, ie this is
a belt on hips.
|
|
|
Author: | electricbaer | Posted: | Jun 14, 2017 10:34 | Subject: | Inventory Change Request for Set 75913-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 61678pb098L Red Slope, Curved 4 x 1 No Studs with 'MAGNETI MARELLI', 'brembo', 'infor', 'SKF' and UPS and Shell Logo Pattern Model Left Side (Sticker) - Set 75913 (Counterpart)
|
|
Author: | electricbaer | Posted: | Jun 14, 2017 10:33 | Subject: | Inventory Change Request for Set 75908-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 11211pb01L Red Brick, Modified 1 x 2 with Studs on 1 Side with Red, Green, and White Pattern Model Left Side (Sticker) - Set 75908 (Counterpart)
* Add 1 Part 11211pb01R Red Brick, Modified 1 x 2 with Studs on 1 Side with Red, Green, and White Pattern Model Right Side (Sticker) - Set 75908 (Counterpart)
* Add 1 Part 85984pb162L Red Slope 30 1 x 2 x 2/3 with Ferrari Logo on Italian Flag Background Pattern Model Left Side (Sticker) - Set 75908 (Counterpart)
* Add 1 Part 85984pb162R Red Slope 30 1 x 2 x 2/3 with Ferrari Logo on Italian Flag Background Pattern Model Right Side (Sticker) - Set 75908 (Counterpart)
* Add 1 Part 11477pb046L Red Slope, Curved 2 x 1 No Studs with Black Stripe on Red Background Pattern Model Left Side (Sticker) - Set 75908 (Counterpart)
* Add 1 Part 11477pb046R Red Slope, Curved 2 x 1 No Studs with Black Stripe on Red Background Pattern Model Right Side (Sticker) - Set 75908 (Counterpart)
* Add 1 Part 11477pb047L White Slope, Curved 2 x 1 No Studs with UPS Logo and Red and Yellow Pattern Model Left Side (Sticker) - Set 75908 (Counterpart)
* Add 1 Part 11477pb047L White Slope, Curved 2 x 1 No Studs with UPS Logo and Red and Yellow Pattern Model Left Side (Sticker) - Set 75908 (Counterpart)
* Add 1 Part 15068pb112R Red Slope, Curved 2 x 2 No Studs with Yellow Eye, '51', Italian Flag and Red Vents Pattern Model Right Side (Sticker) - Set 75908 (Counterpart)
* Add 1 Part 15068pb112L Red Slope, Curved 2 x 2 No Studs with Yellow Eye, 'ups' and Red Vents Pattern Model Left Side (Sticker) - Set 75908 (Counterpart)
* Add 1 Part 61678pb101L Red Slope, Curved 4 x 1 No Studs with Black, Red and Yellow Stripes Pattern Model Left Side (Sticker) - Set 75908 (Counterpart)
* Add 1 Part 61678pb101R Red Slope, Curved 4 x 1 No Studs with Black, Red and Yellow Stripes Pattern Model Right Side (Sticker) - Set 75908 (Counterpart)
* Add 1 Part 93606pb064 Black Slope, Curved 4 x 2 No Studs with Enclosed Race Car Engine Mechanical Pattern (Sticker) - Set 75908 (Counterpart)
* Add 1 Part 44126pb044 White Slope, Curved 6 x 2 with 'ANSYS', Ferrari Logo, 'HUBLOT', and 'AFCORSE.IT' Pattern (Sticker) - Set 75908 (Counterpart)
* Add 1 Part 75908stk01b (Not Applicable) Sticker for Set 75908 - North American Version - (21957/6120974) (Alternate)
* Add 1 Part 2431pb472 Red Tile 1 x 4 with Ferrari Horse on Italian Flag and Yellow Quarter Circles Pattern (Sticker) - Set 75908 (Counterpart)
* Add 1 Part 2431pb471 Red Tile 1 x 4 with Italian Flag and Black Squares on Red Background Pattern (Sticker) - Set 75908 (Counterpart)
* Add 1 Part 6636pb152 Black Tile 1 x 6 with 'ANSYS' Pattern (Sticker) - Set 75908 (Counterpart)
* Add 1 Part 6636pb151L Red Tile 1 x 6 with 'HUBLOT' and 'pakelo lubricants' Pattern Model Left Side (Sticker) - Set 75908 (Counterpart)
* Add 1 Part 6636pb151R Red Tile 1 x 6 with 'HUBLOT' and 'pakelo lubricants' Pattern Model Right Side (Sticker) - Set 75908 (Counterpart)
* Add 1 Part 87079pb405R Red Tile 2 x 4 with 'ADLER PLASTIC', '51' and 'nordmeccanica group' Pattern Model Right Side (Sticker) - Set 75908 (Counterpart)
* Add 1 Part 87079pb414 Red Tile 2 x 4 with Italian Flag and Yellow and Red Curved Stripes Pattern (Sticker) - Set 75908 (Counterpart)
|
|
Author: | StormChaser | Posted: | Jun 13, 2017 14:21 | Subject: | Re: Remove catalog policy - unreleased set restr. | Viewed: | 38 times | Topic: | Suggestions | |
|
| In Suggestions, WoutR writes:
| Having the images in the catalog is one thing, creating inventories and selling
them is something else.
|
Agreed. I'm definitely for having and being able to add to the Unreleased
Sets section, so I support that part of the suggestion. I question the wisdom,
however, of adding inventories for unreleased sets.
|
|
Author: | WoutR | Posted: | Jun 13, 2017 14:15 | Subject: | Re: Remove catalog policy - unreleased set restr. | Viewed: | 32 times | Topic: | Suggestions | |
|
| In Suggestions, StormChaser writes:
| In Suggestions, WoutR writes:
| If LEGO decided that the sets are not good enough to sell, why should we pretend
they were official sets?
|
I don't believe anyone wants to pretend they were official sets, but the
Unreleased Sets section of the BrickLink catalog is very useful since many of
them have official LEGO set images:
|
Having the images in the catalog is one thing, creating inventories and selling
them is something else.
|
|
Author: | StormChaser | Posted: | Jun 13, 2017 14:07 | Subject: | Re: Remove catalog policy - unreleased set restr. | Viewed: | 34 times | Topic: | Suggestions | |
|
| In Suggestions, WoutR writes:
| If LEGO decided that the sets are not good enough to sell, why should we pretend
they were official sets?
|
I don't believe anyone wants to pretend they were official sets, but the
Unreleased Sets section of the BrickLink catalog is very useful since many of
them have official LEGO set images:
|
|
Author: | WoutR | Posted: | Jun 13, 2017 13:58 | Subject: | Re: Remove catalog policy - unreleased set restr. | Viewed: | 27 times | Topic: | Suggestions | |
|
| In Suggestions, LordSkylark writes:
| In Suggestions, novabrick writes:
| In Suggestions, LordSkylark writes:
| Please revise the catalog policy by removing this restriction to the catalog
from:
"Items that should not be added to the catalog:", Section 1, on this page:
http://www.bricklink.com/help.asp?helpID=71
"Also, do not submit items which have been verified as never released, even if
a picture is available."
There is already a large list of unreleased sets on bricklink. There is no reason
why more should not be allowed to be added, so that bricklink can remain the
most complete Lego database. (Otherwise, what's the point to even having
the current list???)
And there is no reason why people should not be able to buy and sell these sets
even if the boxes and instructions were not officially released (since many of
these sets can be fully made from the released pieces).
(NOTE: This is not a catalog request, or anything of the sort -- this is
a post which is to be voted on by the community and for the head administration
to see in the SUGGESTIONS for them to possibly implement.)
Thank you for your consideration,
Andy
|
This does exist yet:
https://www.bricklink.com/catalogList.asp?itemStatus=N
or am I missing something?
Christian
novabrick-team
|
Yes, the catalog adminstrators refuse to add more sets to that category when
I have submitted them multiple times. The submission is immediately deleted.
Also, I am not allowed to sell sets in the unreleased category, even if all of
the parts are available and I can make a used set to sell.
|
If LEGO decided that the sets are not good enough to sell, why should we pretend
they were official sets? Maybe the only place where they belong is in the MOC
shop.
Or am I missing something here?
|
|
Author: | LordSkylark | Posted: | Jun 13, 2017 13:25 | Subject: | Re: Remove catalog policy - unreleased set restr. | Viewed: | 46 times | Topic: | Suggestions | |
|
| In Suggestions, novabrick writes:
| In Suggestions, LordSkylark writes:
| Please revise the catalog policy by removing this restriction to the catalog
from:
"Items that should not be added to the catalog:", Section 1, on this page:
http://www.bricklink.com/help.asp?helpID=71
"Also, do not submit items which have been verified as never released, even if
a picture is available."
There is already a large list of unreleased sets on bricklink. There is no reason
why more should not be allowed to be added, so that bricklink can remain the
most complete Lego database. (Otherwise, what's the point to even having
the current list???)
And there is no reason why people should not be able to buy and sell these sets
even if the boxes and instructions were not officially released (since many of
these sets can be fully made from the released pieces).
(NOTE: This is not a catalog request, or anything of the sort -- this is
a post which is to be voted on by the community and for the head administration
to see in the SUGGESTIONS for them to possibly implement.)
Thank you for your consideration,
Andy
|
This does exist yet:
https://www.bricklink.com/catalogList.asp?itemStatus=N
or am I missing something?
Christian
novabrick-team
|
Yes, the catalog adminstrators refuse to add more sets to that category when
I have submitted them multiple times. The submission is immediately deleted.
Also, I am not allowed to sell sets in the unreleased category, even if all of
the parts are available and I can make a used set to sell.
|
|
Author: | tEoS | Posted: | Jun 13, 2017 12:07 | Subject: | Re: Parts list error for 7181 UCS TIE Interceptor | Viewed: | 32 times | Topic: | Suggestions | |
|
| Are you sure? 4 are used per wing = 8 total.
Pg. 17: four are used for one wing. Then on pg. 35 it shows that you repeat
all the steps from pgs. 16-35 to build the second wing.
In Suggestions, TomVanhaelen writes:
| Piece 2420 (2x2 corner plate) in dark gray is in this set 8 times according to
the Bricklnk parts list, but in reality you need 16. Please fix this, so others
who want to bricklink the set don't encounter the same problem I did when
putting everything together . Thanks!
|
|
|
Author: | M.Boss | Posted: | Jun 13, 2017 12:03 | Subject: | Re: Parts list error for 7181 UCS TIE Interceptor | Viewed: | 27 times | Topic: | Suggestions | |
|
| In Suggestions, TomVanhaelen writes:
| Piece 2420 (2x2 corner plate) in dark gray is in this set 8 times according to
the Bricklnk parts list, but in reality you need 16. Please fix this, so others
who want to bricklink the set don't encounter the same problem I did when
putting everything together . Thanks!
|
Use the link below for Inventory changes, the suggestions topic is meant for
improving the website.
https://www.bricklink.com/catalogInvChange.asp?itemType=S
M.Boss
|
|
Author: | TomVanhaelen | Posted: | Jun 13, 2017 11:32 | Subject: | Parts list error for 7181 UCS TIE Interceptor | Viewed: | 84 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Piece 2420 (2x2 corner plate) in dark gray is in this set 8 times according to
the Bricklnk parts list, but in reality you need 16. Please fix this, so others
who want to bricklink the set don't encounter the same problem I did when
putting everything together . Thanks!
|
|
Author: | electricbaer | Posted: | Jun 13, 2017 09:50 | Subject: | Inventory Change Request for Set 75012-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 892pb031R Light Bluish Gray Road Sign Clip-on 2 x 2 Triangle with Blue Stripe on Dark Bluish Gray Background Pattern Model Right Side (Sticker) - Set 75012 (Counterpart)
* Add 1 Part 892pb031L Light Bluish Gray Road Sign Clip-on 2 x 2 Triangle with Blue Stripe on Dark Bluish Gray Background Pattern Model Left Side (Sticker)) - Set 75012 (Counterpart)
|
|
Author: | electricbaer | Posted: | Jun 13, 2017 09:50 | Subject: | Inventory Change Request for Set 8182-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3069bpb571R Red Tile 1 x 2 with 'ENgyne' and 'Ironer' Pattern Model Right Side (Sticker) - Set 8182 (Counterpart)
|
Author: | electricbaer | Posted: | Jun 13, 2017 09:49 | Subject: | Inventory Change Request for Set 75038-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 3068bpb1089 Light Bluish Gray Tile 2 x 2 with Dark Red SW Semicircles on Tan Circle on Light Bluish Gray Background Pattern (Sticker) - Set 75038 (Counterpart)
|
|
Author: | novabrick | Posted: | Jun 13, 2017 02:50 | Subject: | Re: Remove catalog policy - unreleased set restr. | Viewed: | 57 times | Topic: | Suggestions | |
|
| In Suggestions, LordSkylark writes:
| Please revise the catalog policy by removing this restriction to the catalog
from:
"Items that should not be added to the catalog:", Section 1, on this page:
http://www.bricklink.com/help.asp?helpID=71
"Also, do not submit items which have been verified as never released, even if
a picture is available."
There is already a large list of unreleased sets on bricklink. There is no reason
why more should not be allowed to be added, so that bricklink can remain the
most complete Lego database. (Otherwise, what's the point to even having
the current list???)
And there is no reason why people should not be able to buy and sell these sets
even if the boxes and instructions were not officially released (since many of
these sets can be fully made from the released pieces).
(NOTE: This is not a catalog request, or anything of the sort -- this is
a post which is to be voted on by the community and for the head administration
to see in the SUGGESTIONS for them to possibly implement.)
Thank you for your consideration,
Andy
|
This does exist yet:
https://www.bricklink.com/catalogList.asp?itemStatus=N
or am I missing something?
Christian
novabrick-team
|
|
Author: | LordSkylark | Posted: | Jun 12, 2017 18:00 | Subject: | Bionicle+Hero Factory+Large Figure Category | Viewed: | 53 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Please combine the catalog categories on one category:
Bionicle
Hero Factory
Large Figure Part
(and even a few bionicles parts that are for some reason stuck in the technic
category when they are used for nothing other than bionicles).
Then, sub-divide that category into several smaller categories such as:
Head, Mask, Torso, Limb, Foot, etc.
There is no reason to have these three categories. Large amounts of a part found
in one category is used by another. For example, some Hero Factory parts are
used in more bionicle figures than Hero Factory. And wading through any of those
three categories even in their current state in order to find something is almost
ridiculous.
(NOTE: This is not a catalog request, or anything of the sort -- this is
a post which is to be voted on by the community and for the head administration
to see in the SUGGESTIONS for them to possibly implement.)
|
|
Author: | LordSkylark | Posted: | Jun 12, 2017 17:48 | Subject: | Remove catalog policy - unreleased set restr. | Viewed: | 109 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Please revise the catalog policy by removing this restriction to the catalog
from:
"Items that should not be added to the catalog:", Section 1, on this page:
http://www.bricklink.com/help.asp?helpID=71
"Also, do not submit items which have been verified as never released, even if
a picture is available."
There is already a large list of unreleased sets on bricklink. There is no reason
why more should not be allowed to be added, so that bricklink can remain the
most complete Lego database. (Otherwise, what's the point to even having
the current list???)
And there is no reason why people should not be able to buy and sell these sets
even if the boxes and instructions were not officially released (since many of
these sets can be fully made from the released pieces).
(NOTE: This is not a catalog request, or anything of the sort -- this is
a post which is to be voted on by the community and for the head administration
to see in the SUGGESTIONS for them to possibly implement.)
Thank you for your consideration,
Andy
|
|
Author: | LordSkylark | Posted: | Jun 12, 2017 17:47 | Subject: | Remove catalog policy - dec. hip&leg restict. | Viewed: | 85 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Please revise the catalog policy by removing this restriction to the catalog
from:
"Guidelines for adding items to the catalog:", Section 8, on this page:
http://www.bricklink.com/help.asp?helpID=71
"Decorated Minifig Hips and Legs - Submission of entries for the separate component
parts of a printed Minifig, Legs Assembly item is currently discouraged except
under certain circumstances. Those are 1) an administrative judgment that the
minifig involved is significant in some way, and 2) the general design of the
minifig involved is produced in both printed and unprinted legs assembly versions."
Please do this so that all decorated hips and legs may be added and sold individually
on bricklink without restriction.
(NOTE: This is not a catalog request, or anything of the sort -- this is
a post which is to be voted on by the community and for the head administration
to see in the SUGGESTIONS for them to possibly implement.)
Thank you for your consideration,
Andy
|
|
Author: | Bionicleseller | Posted: | Jun 12, 2017 14:18 | Subject: | Re: Classic Wanted List Unavailable on June 5th | Viewed: | 49 times | Topic: | Suggestions | |
|
| Please Please Please leave up the old version! I use it all the time and the
new version is nowhere near as useful. It doesn't even work at all! I have
tried to figure out why but I have no idea and I can't imagine other people
who are new to the site would be having an easier time using it either.
I have a suggestion. BrickLink should have all of the users vote on what they
think should be done. It's just my opinion, but I think you guys would be
surprised to see how many people really don't like the new version and want
to stick with the classic version.
|
|
Author: | randyipp | Posted: | Jun 12, 2017 13:54 | Subject: | Re: Keep history of Splash page | Viewed: | 29 times | Topic: | Suggestions | |
|
| In Suggestions, Brickwilbo writes:
| In Suggestions, Cob writes:
| In Suggestions, SylvainLS writes:
| In Suggestions, Cob writes:
| Some sellers don't have anything listed in the terms and conditions and nothing
listed in thes shipping section. Instead everything is posted in their splash
page. This gives those sellers the ability to change their terms and shipping
rates at anytime without the buyer being able to go back and look at the terms/shipping
when they made their purchase.
The only method to prove what the terms were is to make a screenshot of the splash
page when the purchase is made. Then the burden of proof is on the buyer to
prove that the screenshot was the terms/shipping policy when the purchase was
made.
Please start keeping a history of the splash page. For sellers that externally
host their splash page maybe and automatic daily screenshot can be captured and
retained as the terms/shipping policy for the day.
|
Or simply don’t take the splash page as proof of anything and state that only
what’s on the terms page counts.
|
Some sellers have the terms and shipping policies completely blank. So there
is nothing to rely upon.
If you want I can PM you an example. I don't want to publicly announce the
seller.
|
You should inform those sellers that they should state fees etc on their Terms
page.
All additional fees other than shipping and insurance must be stated here.
Please keep your terms clear and to the point. Your terms are also displayed
to a buyer on checkout prior to placing an order.
|
Yes this seems like a poor way to deal with shipping/terms when there is no history
retained. Seems to me that none of their terms should be enforceable with the
way they have configured their store.
|
|
Author: | Brickwilbo | Posted: | Jun 12, 2017 13:47 | Subject: | Re: Keep history of Splash page | Viewed: | 26 times | Topic: | Suggestions | |
|
| In Suggestions, Cob writes:
| In Suggestions, SylvainLS writes:
| In Suggestions, Cob writes:
| Some sellers don't have anything listed in the terms and conditions and nothing
listed in thes shipping section. Instead everything is posted in their splash
page. This gives those sellers the ability to change their terms and shipping
rates at anytime without the buyer being able to go back and look at the terms/shipping
when they made their purchase.
The only method to prove what the terms were is to make a screenshot of the splash
page when the purchase is made. Then the burden of proof is on the buyer to
prove that the screenshot was the terms/shipping policy when the purchase was
made.
Please start keeping a history of the splash page. For sellers that externally
host their splash page maybe and automatic daily screenshot can be captured and
retained as the terms/shipping policy for the day.
|
Or simply don’t take the splash page as proof of anything and state that only
what’s on the terms page counts.
|
Some sellers have the terms and shipping policies completely blank. So there
is nothing to rely upon.
If you want I can PM you an example. I don't want to publicly announce the
seller.
|
You should inform those sellers that they should state fees etc on their Terms
page.
All additional fees other than shipping and insurance must be stated here.
Please keep your terms clear and to the point. Your terms are also displayed
to a buyer on checkout prior to placing an order.
|
|
Author: | SylvainLS | Posted: | Jun 12, 2017 13:38 | Subject: | Re: Keep history of Splash page | Viewed: | 31 times | Topic: | Suggestions | |
|
| In Suggestions, Cob writes:
| […]
| Or simply don’t take the splash page as proof of anything and state that only
what’s on the terms page counts.
|
Some sellers have the terms and shipping policies completely blank. So there
is nothing to rely upon.
If you want I can PM you an example. I don't want to publicly announce the
seller.
|
Sorry, when I say “don’t take… as proof,” I’m thinking “BL admins ought not to
take… as proof.”
If there’s a problem, only the terms page should serve as proof. If the seller
has only given their policies in their splash page, tough luck, the buyer is
right.
|
|
Author: | Cob | Posted: | Jun 12, 2017 12:33 | Subject: | Re: Keep history of Splash page | Viewed: | 28 times | Topic: | Suggestions | |
|
| In Suggestions, SylvainLS writes:
| In Suggestions, Cob writes:
| Some sellers don't have anything listed in the terms and conditions and nothing
listed in thes shipping section. Instead everything is posted in their splash
page. This gives those sellers the ability to change their terms and shipping
rates at anytime without the buyer being able to go back and look at the terms/shipping
when they made their purchase.
The only method to prove what the terms were is to make a screenshot of the splash
page when the purchase is made. Then the burden of proof is on the buyer to
prove that the screenshot was the terms/shipping policy when the purchase was
made.
Please start keeping a history of the splash page. For sellers that externally
host their splash page maybe and automatic daily screenshot can be captured and
retained as the terms/shipping policy for the day.
|
Or simply don’t take the splash page as proof of anything and state that only
what’s on the terms page counts.
|
Some sellers have the terms and shipping policies completely blank. So there
is nothing to rely upon.
If you want I can PM you an example. I don't want to publicly announce the
seller.
|
|
Author: | bb95990 | Posted: | Jun 12, 2017 12:09 | Subject: | Inventory Change Request for Set 5127-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part {Blue to Trans-Dark Blue} 2569 Antenna Whip 8H
|
|
Author: | Lkj | Posted: | Jun 12, 2017 11:45 | Subject: | Re: Classic Wanted List Unavailable on June 5th | Viewed: | 48 times | Topic: | Suggestions | |
|
| So glad you haven't dropped the good, old Classic Wanted List. So much better
than the new one! Hope you've changed your minds. Please keep it!
In Administrative, Admin_Jaclyn writes:
| Hello Everyone,
In June of last year, we introduced a new Wanted List upgrade. This upgrade came
with a newly-designed buying experience which focused on the necessity to compare
and plan out multiple carts at once, as well as make it easier to manage multiple
lists.
Since BrickLink's Wanted List is a core feature for most users, we currently
provide the classic version for members to use as a backup in case there are
glitches with the new version. This is intended to be a temporary solution.
The classic version of the Wanted List feature will become unavailable on
June 5, 2017. At this point, we have ensured that the new version of the
Wanted List covers all desired functionality (plus more) from the classic version.
If you have any issues with the new version, please let us know as soon as possible.
Thank you for the continued support, bug reports, and helpful feedback as we
continue to roll out important changes.
Sincerely,
Jaclyn
BrickLink Customer Support
|
|
|
Author: | electricbaer | Posted: | Jun 12, 2017 10:52 | Subject: | Inventory Change Request for Set 9525-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4286pb029R White Slope 33 3 x 1 with Blue Stripes on White Background Pattern Model Right Side (Sticker) - Set 9525 (Counterpart)
* Add 1 Part 85984pb161 Blue Slope 30 1 x 2 x 2/3 with Blue Control Panel on Dark Bluish Gray Background Pattern (Sticker) - Set 9525 (Counterpart)
|
|
Author: | SylvainLS | Posted: | Jun 12, 2017 09:12 | Subject: | Re: Keep history of Splash page | Viewed: | 33 times | Topic: | Suggestions | |
|
| In Suggestions, Cob writes:
| Some sellers don't have anything listed in the terms and conditions and nothing
listed in thes shipping section. Instead everything is posted in their splash
page. This gives those sellers the ability to change their terms and shipping
rates at anytime without the buyer being able to go back and look at the terms/shipping
when they made their purchase.
The only method to prove what the terms were is to make a screenshot of the splash
page when the purchase is made. Then the burden of proof is on the buyer to
prove that the screenshot was the terms/shipping policy when the purchase was
made.
Please start keeping a history of the splash page. For sellers that externally
host their splash page maybe and automatic daily screenshot can be captured and
retained as the terms/shipping policy for the day.
|
Or simply don’t take the splash page as proof of anything and state that only
what’s on the terms page counts.
|
|
Author: | Cob | Posted: | Jun 12, 2017 08:48 | Subject: | Keep history of Splash page | Viewed: | 93 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Some sellers don't have anything listed in the terms and conditions and nothing
listed in thes shipping section. Instead everything is posted in their splash
page. This gives those sellers the ability to change their terms and shipping
rates at anytime without the buyer being able to go back and look at the terms/shipping
when they made their purchase.
The only method to prove what the terms were is to make a screenshot of the splash
page when the purchase is made. Then the burden of proof is on the buyer to
prove that the screenshot was the terms/shipping policy when the purchase was
made.
Please start keeping a history of the splash page. For sellers that externally
host their splash page maybe and automatic daily screenshot can be captured and
retained as the terms/shipping policy for the day.
Thank you,
Jacob
|
|
Author: | axaday | Posted: | Jun 11, 2017 19:24 | Subject: | Inventory Change Request for Set 70326-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3070bpb097 Blue Tile 1 x 1 with Yellow King Symbol on Orange Pentagonal Shield Pattern (Extra)
* Add 1 Part 48729b Light Bluish Gray Bar 1L with Clip Mechanical Claw, Cut Edges and Hole on Side (Extra)
* Add 1 Part 85861 Trans-Orange Plate, Round 1 x 1 with Open Stud (Extra)
* Add 1 Part 87747 Black Barb / Claw / Horn - Large (Extra)
* Add 2 Part 64567 Black Minifig, Weapon Lightsaber Hilt Straight (Extra)
* Add 1 Part 24482 Black Minifig, Weapon Spear Tip with Fins (Extra)
* Add 2 Part 2780 Black Technic, Pin with Friction Ridges Lengthwise WITH Center Slots (Extra)
* Add 1 Part 76764 Flat Silver Minifig, Weapon Sword, Shortsword Elaborate Hilt (Extra)
* Add 1 Part 60849 Light Bluish Gray Minifig, Utensil Hose Nozzle Elaborate (Extra)
* Add 1 Part 3673 Light Bluish Gray Technic, Pin without Friction Ridges Lengthwise (Extra)
* Add 1 Part 3070bpb096 Light Bluish Gray Tile 1 x 1 with Black Cross and Dark Red and Dark Bluish Gray Buttons Pattern (Extra)
* Add 1 Part 53451 Orange Barb / Claw / Horn - Small (Extra)
* Add 1 Part 22388 Pearl Gold Slope 45 1 x 1 x 2/3 Quadruple Convex (Extra)
* Add 1 Part 2569 Trans-Neon Orange Antenna Whip 8H (Extra)
* Add 3 Part 4073 Trans-Neon Orange Plate, Round 1 x 1 Straight Side (Extra)
* Add 3 Part 22388 Trans-Neon Orange Slope 45 1 x 1 x 2/3 Quadruple Convex (Extra)
* Add 1 Part 64647 Trans-Orange Minifig, Plume Feather Triple Compact / Flame / Water (Extra)
|
|
Author: | StormChaser | Posted: | Jun 11, 2017 14:47 | Subject: | Inventory Change Request for Set 76049-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 87079pb410 White Tile 2 x 4 with Red Avengers Logo Pattern (Sticker) - Set 76049 (Counterpart)
Comments from Submitter:
Step 46 on page 78.
|
|
Author: | StormChaser | Posted: | Jun 11, 2017 14:20 | Subject: | Inventory Change Request for Set 10220-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 10220stk02b (Not Applicable) Sticker for Set 10220 - Sheet 2, Mirrored - North American Version - (16493/6061671) (Alternate) (match ID 16)
* Change 1 Part (Not Applicable) 10220stk02a Sticker for Set 10220 - Sheet 2, Mirrored - International Version - (94349/4614425) {match ID 0 to 16}
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|