Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | Elenoe | Posted: | Aug 11, 2019 11:37 | Subject: | Hidden Side inventories | Viewed: | 155 times | Topic: | Catalog | Status: | Open | |
|
| Having recently bought the Newbury High School and built it I am surprised to
find the dog Spencer is listed on here as Trans Clear with marbled White, when
the parts list in the inventory clearly places it in White. Should this not
be White with Marbled Trans Clear?
Similarly hs001 has a pending approval inventory in which the submitter is unsure
if the White hoodie with a Red cap should be classified as Red or White. Again
the inventory supplied with the set has this as White.
When compiling inventories should we not give greater weight to the Lego parts
list as to what colour a part is?
And yes the minifigure Jack is identical to the one in 70418-1 J.B's Ghost
Lab - hs001.
|
|
Author: | constructibles | Posted: | Aug 11, 2019 10:20 | Subject: | Elements Exclusive to BaM | Viewed: | 197 times | Topic: | Catalog | Status: | Open | |
|
| Just to add to the never-ending "identify this part" questions, it's now
been semi-officially confirmed that LEGO has created exclusive elements for the
BaM (Build a Minifgure) bins in LBR stores. I'm sure this will give more
people headaches for authenticating parts, since they will not appear in any
inventories. Looks interesting though, and I hope they keep introducing new
elements.
|
|
|
Author: | paolocolombo | Posted: | Aug 11, 2019 06:37 | Subject: | Set 8496 counterparts inventory | Viewed: | 60 times | Topic: | Catalog | Status: | Open | |
|
| Point out that in the inventory set 8496 some counterparts are missing:
- 61070 Lime Technic, Panel Car Mudguard Right with sticker
- 61071 Lime Technic, Panel Car Mudguard Left with sticker
- 61069 (2x) Dark Bluish Gray Technic, Block Engine Block Half / Side Intake
with sticker orange outfun and black rhino
- 61069 (2x) Dark Bluish Gray Technic, Block Engine Panel Half / Side Intake
with green sticker 65
|
|
Author: | JusTiCe8 | Posted: | Aug 11, 2019 06:08 | Subject: | 4460 a/b: wrong height | Viewed: | 98 times | Topic: | Catalog | Status: | Open | |
|
| Hi,
Looks like this parts:
is taller than described as it is 4 studs high instead of 3 unless there is a
way to measure height I don't know.
Fortunately, there is no 3 studs high slope and I believe any MOCers using the
part just call it by its name and there would be no issue when building.
Strangely, part and all its variants looks like to be also 4 studs
high and not 3 (last pic clearly shows the same aspect ratio as 4460).
By the way 3684 is not marked for deletion yet.
Where was the issue ? "It's not you it's us" or just me ?
Thanks.
|
|
|
Author: | gloudo | Posted: | Aug 10, 2019 07:22 | Subject: | Alternate Item Relations | Viewed: | 48 times | Topic: | Catalog | Status: | Open | |
|
| Hi All,
I'm building a database in MS Access where I want to compare my sets with
a different set to see if I can build the different set with the parts I have.
What I like to know is, is there a downloadable table with related items, so
if I don't have the original inventory item the DB will search the alternative
items to see if there is a match and give me the quantity of the alternate item?
Or is there an other way to relate the alternate item to the original inventory
item?
Thanx
|
|
Author: | tons_of_bricks | Posted: | Aug 9, 2019 14:24 | Subject: | Why can't I enlarge pics anymore? | Viewed: | 120 times | Topic: | Catalog | Status: | Open | |
|
| So you used to be able to click on the picture of a piece in the catalog, sort
of a quick view. You'd see the years it was made, any sets/minifigures the
piece was in, etc. You all know what I'm talking about. Well, a few days
ago I couldn't do it anymore. I've tried three different devices.
Why would they make such a horrible change for? I rely on that heavily when listing
minifigure parts to make sure I have the correct listing. This is going to make
this job twice as long now.
|
|
Author: | carluiscruz | Posted: | Aug 5, 2019 10:49 | Subject: | 973pb0679c01 | Viewed: | 67 times | Topic: | Catalog | Status: | Open | |
|
| Good evening,
I just bought a LEGO minifig with the part torso 973pb0679c01. This torso is
not associated here to none complete minifig, with just the information that
is from 1980. The minifig head in my hands have a small ring, possibly indicating
the minifig was part of a keychan. Could anyone provide me more information about
this curious item?
Best regards,
Cruz
|
|
Author: | yorbrick | Posted: | Aug 4, 2019 17:49 | Subject: | 973pb3600c01 | Viewed: | 73 times | Topic: | Catalog | Status: | Open | |
|
|
Has anyone actually seen this part in a BAM box with the mitt attached? I have
seen multiple of them in three different stores now, and they do not have the
mitt. They have a single hand and a missing hand. You can add either a mitt or
a hand, staff don't care.
So should this be listed with a mitt, given that this is not how it is supplied?
Or at least have a note about this, as not all the torsos will have mitts.
|
|
Author: | anathema | Posted: | Aug 1, 2019 17:42 | Subject: | 128-2 - colour of winch reel | Viewed: | 95 times | Topic: | Catalog | Status: | Open | |
|
|
The instructions show the reel in the winch to be black; the inventory here has
it as red.
Does anyone know for certain which colour the set actually shipped with?
|
|
Author: | normann1974 | Posted: | Aug 1, 2019 10:58 | Subject: | 928 wrong plate? | Viewed: | 117 times | Topic: | Catalog | Status: | Open | |
|
| When I got set as a child, I remember clearly it had one plate of wrong
size in it (different from the one shown in the instructions), and from my recollection
it was the plate that held the control patterned slopes (it should be a 4 x 10
plate). The plate in my set was either 2 studs too long or too short, but I don't
remember which. Unfortunately, I switched the plate to a correct one long time
ago, so I can't prove anything about this today.
Does anyone else remember something like this?
/Jan
|
|
Author: | FreeStorm | Posted: | Jul 31, 2019 07:07 | Subject: | New wire version for set 156-1 | Viewed: | 80 times | Topic: | Catalog | Status: | Open | |
|
| Hello,
In my sealed version of set the connectors are 'Cross-cut'
and not 'Hollow Pin'
The current wire in inventory is this one:
I know wire are on hold for now (project #15)
A) shall I create a new cross-cut connectors wire for 15 studs and modify inventory
(as alternate)?
B) I create inventory request with:
and
I prefer option (A).
As every wire length for same type of connectors are going to grow or reduce
the same size depending of project #15.
For example: if wire 996ac15blue need to be adjusted +1 studs, new wire on option
(A) will also grow +1 studs
-Fred
|
|
|
Author: | tpr | Posted: | Jul 30, 2019 09:58 | Subject: | Hair pulling - item for sale ......... | Viewed: | 176 times | Topic: | Catalog | Status: | Open | |
|
| Hi
Ever bought a new set, SEALED, but with No Minifig
check out the cheapest new set for sale
Surely this has to stop
tpr
|
Author: | FreeStorm | Posted: | Jul 30, 2019 08:35 | Subject: | New version of 649pb10 | Viewed: | 70 times | Topic: | Catalog | Status: | Open | |
|
| I found a new version of
As you can see on the picture, the men is not the same on both sign
Should I create a new part, or request to add an additional note ?
It will be difficult to know which part goes on which set.
|
|
Author: | WorcesterWolf | Posted: | Jul 30, 2019 05:28 | Subject: | 21045 Trafalgar Square | Viewed: | 85 times | Topic: | Catalog | Status: | Open | |
|
| When will the parts list be updated?
It is available on Brickset
|
Author: | novabrick | Posted: | Jul 26, 2019 02:09 | Subject: | BA84pb01R Sticker over assembly | Viewed: | 57 times | Topic: | Catalog | Status: | Open | |
|
| [p=BA84pb01R]
These two bricks are jujst hold together by a sticker. I thought this was against
policy here. I just noticed this when looking through new additions to the catalog.
Christian
novabrick-team
|
|
Author: | leopard37 | Posted: | Jul 25, 2019 10:08 | Subject: | Minifigure Query | Viewed: | 89 times | Topic: | Catalog | Status: | Open | |
|
| Morning, Catalog guys I have a query for you. In regards to items attached on
the back there is no guideline in the help page (see full description below).
Could this please be defined and added. Even if there are minifigures that require
editing (I will help if needed). I just wish to prevent less work in the future
by having a clear guideline on what's included and what's not. The one
that peaked my interest is the Mr. Freeze in set 76118 (sh587).
Thanks in advance.
Tyson.
"Minifigs - The catalog should only contain minifigs that came in an official
LEGO set or that can be attributed to an official LEGO program, display, activity
or event, regardless of whether the minifig is actually publicly distributed
during or at such program, display, activity or event.
The minifig item should not include hand-held accessories or items defined as
utensils, with the exception of robot winder keys. But do include all other accessories
definable as footgear (flippers, snow shoes, etc.), neckgear (generally defined
as items requiring the removal of the head in order to be placed over the neck,
such as capes, armor, backpacks, etc.) and headgear (hair, helmets, etc.), and
assembled parts serving as such, when these are shown attached to the minifig
in official LEGO set instructions. For instructions with images showing the minifig
in a play scenario, refer only to the portion of the instructions concerned with
assembling the minifig. If no official instructions were produced, then illustrations
on packaging or other marketing materials directly related to the minifig may
be used instead for this guide purpose. (See Exceptions below.)
Minifigs decorated by a sticker may have an entry for the figure without the
sticker applied, and an entry for the figure with the sticker applied. (See Exceptions
below.)
If 2 or more minifigs that came in an official LEGO set are the same except for
different hand-held accessories, do not add another entry for a minifig with
a particular accessory. An example of this would be "Majisto the Wizard with
glow-in-the-dark wand" which should not be added in addition to an otherwise
identical "Majisto the Wizard" entry.
Exceptions:
When the use of set instructions or other official LEGO images provide poor clues
about the precise nature of accessories: For example, numbers printed on neckgear
armor worn by each figure of a series, yet nowhere is it clearly shown which
figure bears which numbered armor. In this case the figures can be added without
neckgear armor. Arbitrarily associating a particular numbered armor with the
other elements of a minifig should not be done.
When the hand held accessory is an integral physical part of the minifig: For
example, the electric light-up figs released beginning in 2005. All the parts
that make up the complete light-up device, including those not integral to its
electric function, should be included as a part of the minifig.
When there is more than one possibility presented within a set for decoration
of the minifig by sticker, a catalog entry should not be created for each variation.
This rule also applies to the Torso and Torso Assembly parts of such minifigs.
For example, some Soccer theme sets have a sticker sheet that allows the builder
to choose from various team insignias and jersey numbers for each player in the
set. If every variation were given an entry, the catalog would be overwhelmed.
The early “stiff” minifigs (1975-1977) were often built into the model and not
shown in a freestanding position. In these cases, a minifig can be considered
a unit without being prescribed as such in the instructions or box images as
long as the four basic parts are present – legs, torso, head and hat/hair."
|
|
Author: | TallyToyBricks | Posted: | Jul 23, 2019 17:41 | Subject: | Plant 2417? | Viewed: | 101 times | Topic: | Catalog | Status: | Open | |
|
| How are the 2417 plant leaves different from the "plant based" 2417?
Thanks
|
Author: | jerzeeg | Posted: | Jul 14, 2019 10:15 | Subject: | collectable minifigures leaflets | Viewed: | 110 times | Topic: | Catalog | Status: | Open | |
|
| Hi,
I could not find anything on the topic :/
Could anyone explain please why are leaflets (instructions) for each minifigure
of the series kept separately in the catalog when they seems to be all the same?
It seems especially weird, when I saw that someone bought leaflet for percival
graves for such high price:
https://www.bricklink.com/v2/catalog/catalogitem.page?I=colhp-22#T=P
while it seems that this leaflet is just pretty the same as all the rest of the
leaflets from this series....
Thx in advance,
J.
|
|
Author: | axaday | Posted: | Jul 13, 2019 15:20 | Subject: | sh289 Robin Cape | Viewed: | 65 times | Topic: | Catalog | Status: | Open | |
|
|
The cape from this Robin matches the cut of the brand new Robin, but if I had
to guess that one looks like starched fabric. The new one is spongy, stretchable.
Can anyone check?
|
Author: | TorontoLego | Posted: | Jul 13, 2019 13:42 | Subject: | 32064 variations | Viewed: | 94 times | Topic: | Catalog | Status: | Open | |
|
| [p=32064c]
Clearly distinguished by the bottom of the brick
[p=32064b]
Is this only a "b" variant if it has the 'thin' corner guides seen from
both faces?
Is this any of these that is not a "b" or "c" based on the above?
OR
Is the distinguishing factor the complete circle support on the inside?
|
|
|
Author: | yorbrick | Posted: | Jul 9, 2019 04:48 | Subject: | Benny's torso 973pb1652c02 | Viewed: | 82 times | Topic: | Catalog | Status: | Open | |
|
| This part is listed as
I have opened seven of the CMF versions and they do not come like this in the
set. The torso comes without the robot arm attached. Is there are reason having
only the assembly in the inventory, and not having it how it actually comes in
the CMF set?
|
|
Author: | blackballoon | Posted: | Jul 6, 2019 23:19 | Subject: | help identify this transformer part? | Viewed: | 107 times | Topic: | Catalog | Status: | Open | |
|
| i saw several similar transformer entries in the catalog but could not figure
out which one to list this as. Can someone kindly help to identify it?
|
|
Author: | axaday | Posted: | Jul 6, 2019 21:33 | Subject: | Question For Someone with Underminer Minifies | Viewed: | 97 times | Topic: | Catalog | Status: | Open | |
|
|
wears this cape
I am usually a fan of dynamically posed catalog pics, but this time I just can't
tell if this piece is the same cut as a new piece that I need to get into the
catalog. Can someone tell me if the attached pic is the same shape?
|
|
|
Author: | samsam2 | Posted: | Jul 6, 2019 12:28 | Subject: | Stickered Assembly numbering BA77pb01 | Viewed: | 48 times | Topic: | Catalog | Status: | Open | |
|
| Not sure if sequence number for multiple stickered assembly parts from same set
should increment the 'pb01' to 'pb02' rather than from BA76pb01
to BA77pb01. The part I'm questioning is [p=BA77pb01] and if it should actually
become [p=BA76pb02]
|
|
Author: | bb1429717 | Posted: | Jul 4, 2019 19:19 | Subject: | 700e H Baseplate? | Viewed: | 104 times | Topic: | Catalog | Status: | Open | |
|
| In the catalog I see there are a few varients of the 700e early baseplate, but
I recently ran across a couple with numbers that werent in the catolog. They
are most similar to the 700eD plates, but to have different featured like the
shape of the cross supports where they cross, and are marked '700 e H'
on the bottom.
Should The 700e H varient be added and/or does anyone know anything about this
baseplate? (sorry I'm very new here or I would attempt to add it myself)
|
|
Author: | mr.misior | Posted: | Jul 4, 2019 18:14 | Subject: | holographic tile ID please | Viewed: | 54 times | Topic: | Catalog | Status: | Open | |
|
| could someone please tell me which set this belongs to.
the face is holographic and only visible at certain angle.
|
|
Author: | yorbrick | Posted: | Jul 4, 2019 07:04 | Subject: | Brand filters (again!) | Viewed: | 153 times | Topic: | Catalog | Status: | Open | |
|
| The AFOL sets are not real LEGO sets, right?
Have they been catalogued incorrectly or are the filters not working correctly?
|
|
Author: | Emperor_Penguin | Posted: | Jun 29, 2019 14:58 | Subject: | Remake the Hero Factory categories? | Viewed: | 96 times | Topic: | Catalog | Status: | Open | |
|
| Right now for the Hero Factory theme, there are 3 categories (Heroes,Villains,Vehicles).
I was wondering if each release wave theme could get its own sub-category (Breakout,
Brain Attack, Invasion from below, ETC...)
I can use the catalog add/change feature, just wondering if it should be done
first.
|
Author: | dakotakidsshop | Posted: | Jun 24, 2019 11:18 | Subject: | brown rotating box with part # 5483 | Viewed: | 91 times | Topic: | Catalog | Status: | Open | |
|
| looking for help figuring out what this is and what it is used for. part # non
it 5483 but dont seem to yield any results when searching that #.
|
|
Author: | axaday | Posted: | Jun 23, 2019 17:16 | Subject: | Does 970653-1 come apart? | Viewed: | 97 times | Topic: | Catalog | Status: | Open | |
|
| [p=970653-1]
I got two of these in a set that will need its inventory updated. But I am trying
to figure it out. The part is inventoried but it doesn’t really look playable.
I gave it a soft tug to see if it was just clutched and I don’t think it is.
|
Author: | ForTheGirls | Posted: | Jun 23, 2019 08:44 | Subject: | Flesh colored yoda, no markings | Viewed: | 197 times | Topic: | Catalog | Status: | Open | |
|
| Is this s legitimate LEGO head? I dont see it in the catalog. |
|
Author: | Brick_Qc | Posted: | Jun 22, 2019 20:00 | Subject: | How many polybags in a 4561 set ? | Viewed: | 64 times | Topic: | Catalog | Status: | Open | |
|
| Hi, I just got a new opened 4561 with sealed polybags and I'd like to know
if it's complete. I have 8 polybags with pictures and one without containing
1x16 bricks.
TIA
|
|
Author: | yorbrick | Posted: | Jun 20, 2019 14:52 | Subject: | col08-14 ACTOR | Viewed: | 89 times | Topic: | Catalog | Status: | Open | |
|
|
Is there a reason this keeps getting changed?
This set was originally listed as Actor, it was then changed to Thespian. I asked
for the Actor name to be reinstated, which it was, and then it was removed again.
The minifigure version has both names:
Why can the set not keep both names?
And on their webpages, LEGO refer to it as ACTOR. If it can have only one name,
then surely it should be the LEGO one.
https://www.lego.com/en-gb/themes/minifigures/products/lego-minifigures-8833
|
|
|
Author: | Fynbos | Posted: | Jun 20, 2019 11:13 | Subject: | Cookie Cutters - bought in Billund - 853890 | Viewed: | 124 times | Topic: | Catalog | Status: | Open | |
|
| Hi,
I am unable to find in this catalogue the item I just bought in Billund:
5 cookie cuttters, LEGO 853890, item 6255877, EAN 673419306935.
Am I searching wrong or is this not yet listed here?
Thanks
Florian
|
|
Author: | JXC123 | Posted: | Jun 20, 2019 00:18 | Subject: | Cycle Shop set 6699-1 | Viewed: | 96 times | Topic: | Catalog | Status: | Open | |
|
| I have downloaded the parts lists from many sources, incl blink and all seem
to include red door 73435c01 as the front door. Clearly the pictures show a need
for door 73436c01 not the one in the catalogue.
Has anyone else run into this - it has cost me 2 wrong door so far.
JXC 123. John
|
|
Author: | crazylegoman | Posted: | Jun 17, 2019 20:35 | Subject: | New part that doesn't exist without printing | Viewed: | 107 times | Topic: | Catalog | Status: | Open | |
|
| There's a new part I want to add to the catalog, and so far it only exists
with a printing on it. Is the proper procedure to add a sort of "placeholder"
entry for the actual new mold/part that has no printing, and then add the new
printed part that I have? I will upload a photo of the printed version I have,
but of course, cannot for the base part.
Thanks,
David
|
Author: | normann1974 | Posted: | Jun 15, 2019 16:32 | Subject: | Other counterparts for set 7725-1? | Viewed: | 53 times | Topic: | Catalog | Status: | Open | |
|
|
Will you accept other counterparts (stickered doors) for this set? The sticker
sheet comes with many different railway names, and I have doors with "DSB" stickers.
/Jan
|
Author: | brickconnector | Posted: | Jun 13, 2019 03:47 | Subject: | How to add instruction weight? | Viewed: | 43 times | Topic: | Catalog | Status: | Open | |
|
| I cannot add the weight of instruction book 8307-1. (177 grams). If I go to https://www.bricklink.com/catalogReq.asp
which category should I choose?
Set | Part | Minifig | Book | Gear | Catalog
Whichever I choose it doesn't work.
|
Author: | run4ever | Posted: | Jun 12, 2019 14:32 | Subject: | help to find a item | Viewed: | 84 times | Topic: | Catalog | Status: | Open | |
|
| Hi guys!
I need to know the code of the part in the attached image!
Anyone can help me?
Thanks a lot!
|
|
Author: | mikemuscar | Posted: | Jun 11, 2019 11:42 | Subject: | parts | Viewed: | 60 times | Topic: | Catalog | Status: | Open | |
|
| help I'm looking for parts. 1 what Lego digital designer calls mini alien
pet. 2 what Lego digital designer calls shell morning star. dose anyone
have this parts or know wat set they are in. also where if anywhere I can find
them in the studio program.
|
Author: | mjsheller | Posted: | Jun 9, 2019 14:57 | Subject: | adding something to the catalog | Viewed: | 73 times | Topic: | Catalog | Status: | Open | |
|
| Set 8769 Visorak's Gate
I have piece 6082 and 6083 both with stickers applied. However to list them
in my store there is no number assigned to these pieces with stickers.
How do I go about asking for these two items to be added to your catalog?
Regards,
Josie
Carefree Building Blocks
|
|
|
Author: | C0lsanders_ | Posted: | May 29, 2019 08:50 | Subject: | First time addition, how long | Viewed: | 165 times | Topic: | Catalog | Status: | Open | |
|
| I made 2 additions to the catalog the other day (2 tiles, from https://www.bricklink.com/message.asp?ID=1141099).
How long is typical for them to be approved and added? And, can I perhaps expect
a message or some other notification that "your item has been added", or similar?
Thanks,
Miles (C0lsanders_)
|
Author: | mokibricks | Posted: | May 27, 2019 10:11 | Subject: | 62436c01pb01 - year released | Viewed: | 58 times | Topic: | Catalog | Status: | Open | |
|
| Hi,
I just have a 62436c01pb01 in my hands also its pair and both have 2006 as the
year on them. Do I have a different part or the catalog needs an update?
Thanks,
Tamas
|
|
|
Author: | novabrick | Posted: | May 27, 2019 04:12 | Subject: | Magnetic Dooku | Viewed: | 80 times | Topic: | Catalog | Status: | Open | |
|
| Hi Guys.
We have a Count Dooku Clonewars figure
on a magnet from
It's only missing the lightsaber.
However different to the listing the minifig is permanently glued to the base
+ Torso to the Legs. Basically only Head arms and cape are removable. Is there
a plan to include these glued Magnetfigs in the catalog? Or is only the complete
set considered sellable.
Also there maybe should be added a notice to those sets in regards of being glued
or with lose minifigs.
Regards
Christian
novabrick-team
|
|
Author: | clrv4000 | Posted: | May 26, 2019 22:49 | Subject: | 11650c01 Vehicle Base sub-components | Viewed: | 53 times | Topic: | Catalog | Status: | Open | |
|
| I was wondering if anyone has attempted/managed to separate the joined sub-components
that make up this assembly. As far as I can tell on mine, doing this would cause
damage. I'm curious to know what the 'rivet-like' pins on the bottom
look like separated and whether they could serve another useful purpose on their
own. I would hazard a guess that it is stud diameter for a length of one plate-thickness
with a bar-size (or similar) hole in the center on the inside.
I presume there is no LEGO-published part number for the pin alone.
|
|
Author: | seymour3113 | Posted: | May 25, 2019 14:10 | Subject: | 4070a | Viewed: | 125 times | Topic: | Catalog | Status: | Open | |
|
| I have several of these bricks (4070a). They are being deleted from catalog.
Should I just list them as 4070?
|
Author: | Stuart9 | Posted: | May 23, 2019 10:13 | Subject: | Old Mosaic pieces. | Viewed: | 113 times | Topic: | Catalog | Status: | Open | |
|
| Can I ask what proof is required to submit the rectangular version of the 3062oldtile
?
I have both the one shown below and the rectangular version without stud that
I suppose would be something like 3005oldtile.
Not ready to list just yet but might want to do so sometime this year.
[p=3062oldtile]
|
Author: | sheppy02 | Posted: | May 22, 2019 05:40 | Subject: | which is the correct listing? | Viewed: | 113 times | Topic: | Catalog | Status: | Open | |
|
| Hello All,
I am just listing some items, I had one
[p=630-3]
trying to find the others in my inventory no joy, searched by brick separator
my others are listed
which are up for approx. 8 times the price. what is the difference? or are they
essentially the same products?
Thanks
Alex
|
|
Author: | Cob | Posted: | May 19, 2019 15:56 | Subject: | Protest of 3830c01 marked for deletion | Viewed: | 214 times | Topic: | Catalog | Status: | Open | |
|
| In protest of 3830c01 being marked for deletion I am not going to sell either
3830 or 3831 on BrickLink.
I sell used bricks, nearly all of these come to me as a complete hinge, in order
to sell them I must either sell them as a pair or manually separate them and
then list them separately.
I still don't understand why they were marked for deletion. There only single
colors in the catalog, no crossed colors, no decorated items. Nothing but plain
single colors.
I will sell them on other well known sites.
Cob
|
|
|
Author: | rapar | Posted: | May 13, 2019 10:45 | Subject: | Please approve LEGO DC 30623: Shazam! Polybag | Viewed: | 244 times | Topic: | Catalog | Status: | Open | |
|
| Hello,
Can you please approve LEGO DC Super Heroes: 30623 Shazam Polybag? I have
some in my hands. This polybag can already be purchased in Poland.
If you need more information please let me know.
Thank you!
|
|
Author: | TorontoLego | Posted: | May 13, 2019 04:37 | Subject: | Does part 6057 (Short Rigging) need a variant | Viewed: | 89 times | Topic: | Catalog | Status: | Open | |
|
| The four black ones and one brown one are about a plates width shorter. I can't
be the first one to notice this!
|
|
Author: | joesecc | Posted: | May 12, 2019 08:12 | Subject: | Power functions - Hub | Viewed: | 81 times | Topic: | Catalog | Status: | Open | |
|
| Hi,
What are the differences between the Power function Hubs: 88009 and bb892c01?
Externally they look the same.
|
|
Author: | axaday | Posted: | May 10, 2019 15:45 | Subject: | Iron Man Mark 43 Issue | Viewed: | 114 times | Topic: | Catalog | Status: | Open | |
|
| and are both named Mark 43 in the catalog and though they
are very similar, they are distinguishable and I fear there may be an error.
But maybe not?
came in 3 Age of Ultron sets and was originally named "Iron Man MK43".
Tony did use Mark 43 in that movie. And you can recognize design elements from
it in the minifig. All 3 of the scenes depicted in the Lego sets were when Tony
was wearing 43 in the movie. In short, this seems like a closed case.
came out last year, retroactively an Age of Ultron set. It is very
similar to sh167. There is a slight deco change to the legs that reflects nothing
on Mark 33. There is a larger change to the upper torso with a large gray panels
with silver cables. This also doesn't depict anything in the Mark 33 Armor
or the Mark 34 used late in the movie. I don't readily find an MCU Armor
with that design element. What's worse (and embarrassing) is that this minifig
was originally named "Iron Man (76105)". It was me that changed it to "Iron
Man Mk 43 (Trans-Clear Head)" and then to "Iron Man Mark 43 Armor (Trans-Clear
Head)" and I have no recollection of what information I was going on. Maybe
the instructions or box say so? I haven't seen the movie since it came out.
Does this perhaps depict damage that Hulk did to the Armor?
|
|
Author: | avyz66 | Posted: | May 10, 2019 15:29 | Subject: | Star Wars MiniFigs | Viewed: | 84 times | Topic: | Catalog | Status: | Open | |
|
| Not sure if this is in the correct area to post. I am wanting to start and complete
a Star Wars MiniFig collection. I am looking for a list with variants included
to help me with this. Any push in the right direction is appreciated.
|
Author: | avyz66 | Posted: | May 10, 2019 14:52 | Subject: | Star Wars MiniFigs | Viewed: | 62 times | Topic: | Catalog | Status: | Open | |
|
| Not sure if this is in the correct area to post. I am wanting to start and complete
a Star Wars MiniFig collection. I am looking for a list with variants included
to help me with this. Any push in the right direction is appreciated.
|
Author: | palenjo | Posted: | May 8, 2019 17:40 | Subject: | 3009p01 | Viewed: | 79 times | Topic: | Catalog | Status: | Open | |
|
| Hi!
I would just like to know if the entry 3009p01 encompasses entry 3009p01e (embossed
print), since there is no separate entry 3009p01s with surface print (or whatever
part id the part with surface print would receive)?
Johan
|
|
Author: | paolocolombo | Posted: | May 8, 2019 13:39 | Subject: | Set 71040 Disney castle | Viewed: | 113 times | Topic: | Catalog | Status: | Open | |
|
| Goodmorning everyone!
Set 71040: are there 2 versions? I noticed that the front box "type 1" under
the word "16+" has:
- the number of pieces
- the word "building toy"
- has 7 minifig.
The front box type 2 does NOT have the number of pieces and does not have the
word "building toy"; has 5 minifig.
Are there any fakes?
Also on the small side where there are minifigs in the type 2 box there are no
small writings.
Thanks as always for the info.
Paul
|
Author: | Hygrotus | Posted: | May 8, 2019 05:38 | Subject: | Mystery part | Viewed: | 293 times | Topic: | Catalog | Status: | Open | |
|
| I have pending approval something like this
[p=Unknown]
Did anybody see something like this? Anybody knows anything about it?
|
|
Author: | dadebrick | Posted: | May 4, 2019 11:14 | Subject: | Part identification 3229a ; 3230a | Viewed: | 39 times | Topic: | Catalog | Status: | Open | |
|
| How do i identify curved inside or curved outside. Thank you all |
Author: | normann1974 | Posted: | May 4, 2019 09:32 | Subject: | Vintage version of 4175? | Viewed: | 84 times | Topic: | Catalog | Status: | Open | |
|
| When sorting my parts
I've noticed some blue and black versions that look different. The shade
of blue is a bit greenish (image may not show this clearly) and the shade of
blue is a bit greyish. They are easily identifiable by their color variation
but they can also be identified by some whitening/fraying along the edges. I
believe they're made from a softer plastic than usual. Are these vintage
or from certain special sets?
/Jan
|
|
|
Author: | 92ebii | Posted: | May 3, 2019 07:38 | Subject: | 3039p23 variations | Viewed: | 64 times | Topic: | Catalog | Status: | Open | |
|
| Hello,
I have in my possession two types of 3039p23 Light Gray Computer Screen with
buttons on the right side.
The regular version (left) has buttons in Yellow, Green and Red - reading downwards.
The other version (right) has the Yellow and Red buttons swapped.
Would this difference be enough for a new code number or at least a mention on
the 3039p23 page.
Regards,
Karl.
|
|
Author: | bb827804 | Posted: | May 1, 2019 20:45 | Subject: | Part Identification? | Viewed: | 113 times | Topic: | Catalog | Status: | Open | |
|
| Can anyone out there help identify the below red colored technic part ID number?
Thank you from Oregon.
|
|
Author: | narval | Posted: | May 1, 2019 07:57 | Subject: | classic space minifig | Viewed: | 128 times | Topic: | Catalog | Status: | Open | |
|
| hi
did i create it when i was a child ? or is it unlisted ?
|
|
Author: | bb564489 | Posted: | Apr 27, 2019 17:38 | Subject: | New minifigures | Viewed: | 80 times | Topic: | Catalog | Status: | Open | |
|
| Has anyone entered into the catalog the new Disney minifigures 2 71024.
Thanks
|
Author: | FreeStorm | Posted: | Apr 27, 2019 13:30 | Subject: | Add CM and studs on wire name | Viewed: | 58 times | Topic: | Catalog | Status: | Open | |
|
| Because it's easer to check the length,
I wanted to add [cm] and [Studs] on wires of category [Electric, Wire & Connector]
For example:
Electric, Power Functions Extension Wire with one Light Bluish Gray End, 25
Studs (20cm) Long
What do you think?
|
Author: | Quaysretire | Posted: | Apr 24, 2019 17:53 | Subject: | Help identify 2 pieces | Viewed: | 107 times | Topic: | Catalog | Status: | Open | |
|
| I have 2 pieces : 44570 dark grey and light grey and on the back they say 2002
however the catalog only starts from 2003 . Help please . Very new to all of
this thanks .
|
Author: | yorbrick | Posted: | Apr 22, 2019 07:40 | Subject: | Brand filter not working | Viewed: | 63 times | Topic: | Catalog | Status: | Open | |
|
| The brand filter is not working correctly. I have LEGO only turned on, yet I
am shown adverts for non-LEGO items during my searches. Is it possible to turn
off non-LEGO products?
|
|
Author: | DamoB | Posted: | Apr 20, 2019 13:50 | Subject: | Help identifying a brick | Viewed: | 111 times | Topic: | Catalog | Status: | Open | |
|
| Hi there, hope someone can help.
I've found what looks like a 7049b but with a white rather than red interior
and 'Pat Pend' on the bottom. It's from a box of my own childhood
Lego so it's definitely from the early 80's - should I list this as a
7049b or is there a better description?
Grateful for some advice...
|
|
Author: | SRC | Posted: | Apr 20, 2019 13:40 | Subject: | size and weight 40334 Avengers Tower | Viewed: | 50 times | Topic: | Catalog | Status: | Open | |
|
| size and weight 40334 Avengers Tower
weight is 290g
dimensions are 26 x 6 x 14 cm
SRC
|
Author: | Alang41 | Posted: | Apr 20, 2019 04:01 | Subject: | Help recognise piece | Viewed: | 104 times | Topic: | Catalog | Status: | Open | |
|
| I bought a job lot of older Lego and there was a lot of plants and trees. And
there is 3 parts I can’t recognise from anywhere
|
|
Author: | smink45 | Posted: | Apr 17, 2019 13:41 | Subject: | 111901-1 ninjago legacy foilpack | Viewed: | 54 times | Topic: | Catalog | Status: | Open | |
|
| Hi,
I have 111901-1 as a foilpack but this set number is given to another set. Is
it possible to make this set correct with the right set numbers?
Jeroen
|
|
|
Author: | SylvainLS | Posted: | Apr 16, 2019 19:49 | Subject: | Lengths in “L” and 18654 | Viewed: | 120 times | Topic: | Catalog | Status: | Open | |
|
| I’m wondering what’s the rationale for having changed the name (and dimensions)
of
from “1 L” to “2/3 L”.
I can’t see where it’s 0.67L.
Especially if I compare it to
and their variants, or with
and other liftarms/beams, or all the connectors with “# L” in their descriptions.
In the same way, its new dimensions are 1 x 1 x 0.67. As it’s a cylinder, it
means the 0.67 is supposed to apply to its height. But its height is exactly
1 stud, which is 5/6th = 0.83 brick, not 2/3rd = 0.67, and, anyway, “L” means
stud, not brick, so 1 = 1.
Therefore, I strongly believe its name should have stayed “Technic, Pin Connector
Round 1 L” and its dimensions should be 1 x 1 x 0.83.
(Actually, its diameter is a shy less than 1 stud, so its dimensions should be
0.9something x 0.9something x 0.83 but all the liftarms have the same width and
are said to be 1 stud wide.)
Not filing a proper catalogue change request because I really would want to know
the reasoning here, not play ping-pong.
|
|
Author: | BEL | Posted: | Apr 14, 2019 08:58 | Subject: | Towel | Viewed: | 140 times | Topic: | Catalog | Status: | Open | |
|
| Hello,
Is there a difference between part 72965 and part Belville towel 5 ×14 ? I don't
see it.
|
Author: | axaday | Posted: | Apr 13, 2019 10:11 | Subject: | Have Rubber Bands Been Consistent? | Viewed: | 69 times | Topic: | Catalog | Status: | Open | |
|
| I have quite a few rubber bands here and some more to post soon. I have generally
been pretty non-critical when parting out Technic sets with old rubber bands,
but I have one I'm not sure about at the moment and all this is to say:
If we edited the names of the old rubber bands to give approximate "diameter
at rest" would they still have in just a few size classes or would we find 20
size classes?
|
|
Author: | SteveDJ | Posted: | Apr 12, 2019 14:28 | Subject: | Is 21313 Inv correct? (Ship in Bottle) | Viewed: | 91 times | Topic: | Catalog | Status: | Open | |
|
| The inventory for Ship in a Bottle shows these two parts:
...both indicating that the print of the continents should be Reddish Brown.
I recently tried to purchase the halves from a Bricklink Seller, only to receive
Brown continents, as per
and
In discussing the situation with the seller, they said they had "Parted Out"
4 such Ship in Bottle sets, yet all the globe pieces in their inventory (including
another 3 or 4 pairs they already had) were the same ... Brown!
Is there some way to verify if the globes in the set might have been different
print colors throughout the manufacture run of Ship in a Bottle?
If you have a Ship in a Bottle set built, take a look at what color the continents
are for you ... perhaps Brown is a valid Alternate that should be added to the
inventory?
|
|
Author: | buildingfactory | Posted: | Apr 12, 2019 09:29 | Subject: | help by brick 2x2 | Viewed: | 86 times | Topic: | Catalog | Status: | Open | |
|
| i don´t find the right item part ID for middle and right brick 2x2
i have 3 different brick 2x2 black
left Brick 2 x 2 without side support and without Two Vertical Lines Each Side
middle 3003? (same as frosted?)
right with cross support number?
|
|
Author: | Vampi | Posted: | Apr 11, 2019 12:43 | Subject: | Set 70822 | Viewed: | 87 times | Topic: | Catalog | Status: | Open | |
|
| Almost half of the past are not listed.Please complete
Thanks
Best Regards Vampi
|
|
Author: | axaday | Posted: | Apr 10, 2019 06:37 | Subject: | 9605-3 Pic Request | Viewed: | 66 times | Topic: | Catalog | Status: | Open | |
|
| The picture of is the larger version with 1500 pieces. There is a
smaller set with the same number that has only 268 pieces. Can someone provide
a picture of that set for the catalog?
|
Author: | cgphoenix | Posted: | Apr 10, 2019 03:50 | Subject: | Image for iphone case 5002518b | Viewed: | 76 times | Topic: | Catalog | Status: | Open | |
|
| Hi!
The main image for the abovementioned iPhone Case is broken, the second one looks
good. Could please someone set the second pic as the main pic?
Thanks!
Chris
|
|
Author: | velocity.rex | Posted: | Apr 8, 2019 11:17 | Subject: | Keffiyeh vs Turban | Viewed: | 111 times | Topic: | Catalog | Status: | Open | |
|
| I get a little annoyed every time I encounter this piece.
It's always the same cycle, I search "turban" because it's very similar
to a turban.
and all that pops up are these;
&
So then I remember that the piece I'm looking for is on a few of the Prince
of Persia minifigs so I go to catalog, minifigs, prince of persia, and then scroll
until I find one with the matching headgear, and then drill down into it's
inventory to find that it's called a "Keffiyeh"
to which my response is, "oh, well, I'll probably never remember that..."
I wish the description was "Headgear Headdress Cloth Wrap Keffiyeh (Turban)"
even if it's not technically a turban. It would help me find it faster in
the future.
At any rate, taking the time to type this all out should help me remember in
the future and I discovered that one only has to type "kef*" in the headgear
search and this pops up so I should be able to remember those 3 letters at least
going forward.
Took me awhile to remember "kepi" for this part too, but I remembered eventually.
|
|
Author: | edk | Posted: | Apr 8, 2019 09:41 | Subject: | inconsistencies | Viewed: | 213 times | Topic: | Catalog | Status: | Open | |
|
| why is a plate modified when is a tile modified? |
Author: | jonwil | Posted: | Apr 7, 2019 07:29 | Subject: | About part 60208 | Viewed: | 65 times | Topic: | Catalog | Status: | Open | |
|
| Should really be classified as a wheel when (to the best of my knowledge)
its never ever been used as a wheel nor had a tyre made that fits it?
The official LEGO parts database classifies as a hub but it classifies
as a turbine.
I believe the part should be renamed since its clearly not a wheel (even if it
happens to be vaguely similar to a different unrelated part that IS used as a
wheel)
|
|
Author: | dfette312 | Posted: | Apr 5, 2019 22:18 | Subject: | Set 75048 | Viewed: | 50 times | Topic: | Catalog | Status: | Open | |
|
| Can a counterpart be added for the 60616 Trans-Red Door 1 x 4 x 6 with Stud Handle
with the stickers applied? It would be similar to 57895pb052, Trans-Red Glass
for Window 1 x 4 x 6 with Red Laser Bars Pattern (Stickers) - Set 76048
|
|
Author: | InqMikhailovich | Posted: | Apr 5, 2019 11:26 | Subject: | Set 40334 - Avengers Tower | Viewed: | 78 times | Topic: | Catalog | Status: | Open | |
|
| This is mostly just a matter of curiosity, but I seem to remember the celebratory
microscale Avengers Tower having had an entry on here previously, and now I can't
find it. Why might that be?
Brickset page: https://brickset.com/sets/40334-1/Avengers-Tower
|
Author: | Juster_Bricks | Posted: | Apr 3, 2019 15:29 | Subject: | Belville Fairy - new color or change of color | Viewed: | 102 times | Topic: | Catalog | Status: | Open | |
|
| Hello,
I have this item in the color Pink. Can you add this color ?
Or is the color not correct for :
Item No: belvFair8
Belville Fairy - Bright Pink with Stars Pattern
See also : https://www.bricklink.com/messageThread.asp?ID=250450&nID=1135471
|
|
Author: | bb1337582 | Posted: | Mar 31, 2019 04:58 | Subject: | Lego 8275 - Contents | Viewed: | 95 times | Topic: | Catalog | Status: | Open | |
|
| Hello there
This is my first post
I just bought Lego set Lego 8275, the box was open, but all lego bags are unopened.
My question is, does anyone know how many lego bags the package should contain,
so I know with 100 percent that the set is complete.
Have searched for 2 days now and have unfortunately nothing to find Hope you
can help me and thank you from Denmark
|
|
|
Author: | GrayCityBricks | Posted: | Mar 30, 2019 18:51 | Subject: | List of known part-color-combinations | Viewed: | 72 times | Topic: | Catalog | Status: | Open | |
|
| Is there a way to get a list of all known colors parts come in?
I don't necesseraly need to know the sets, where the combinations are used
but just a long list of parts and colors.
Or did someone already figured a way out to put this data together and can provide
a list?
The results don't have to be 100% complete and must not be up to date.
|
|
Author: | axaday | Posted: | Mar 29, 2019 23:30 | Subject: | Major Variant of 9725-1 | Viewed: | 98 times | Topic: | Catalog | Status: | Open | |
|
| I intentionally bought a set a week ago that isn't in our catalog and I've
been waiting for it to arrive, but it hasn't. Meanwhile, I opened up a banded
that DID arrive today and soon realized I have something strange on
my hands, so I would appreciate any assistance anyone can offer. The catalog
entry on 9725 says it is the 1998 version, but there is no other version in the
catalog. This one has a piece of paper that says 2002 on it. The inventory
is largely identical, but 3 out 5 minifigs are different, all the grays are bluish
and several other pieces changed color. So I guess it is 9725-2?
Notably, the large card that makes for an incomplete parts list has the old minifigs
and the old color variants. I had everything unsealed before I realized, but
I have everything together.
|
|
|
Author: | BombaFett | Posted: | Mar 25, 2019 04:16 | Subject: | cant's see all color variants listed on sale | Viewed: | 68 times | Topic: | Catalog | Status: | Open | |
|
| Hello, I saw a problem regarding catalog view. I cant's see all color variants
listed on sale. When I add a brick in a unique color, it does not appear to me
on the list of bricks available for sale. Does anyone know what the reason is?
|
Author: | normann1974 | Posted: | Mar 22, 2019 12:10 | Subject: | Are 8x10 remote controls identical inside? | Viewed: | 89 times | Topic: | Catalog | Status: | Open | |
|
| Hi
I have a 8x10 remote control without buttons that I want to sell in case anyone
can use it as spare parts (e.g. reuse the springs). But because I can't identify
it by the buttons, I need to know: Are the inside of all five variants the same
(e.g. only the print different)?
/Jan
|
|
|
Author: | joker33 | Posted: | Mar 22, 2019 10:55 | Subject: | 5580 part list problem: rubber bands | Viewed: | 47 times | Topic: | Catalog | Status: | Open | |
|
| Hi guys.
I am collecting new sets (sealed and open boxes). I recently got a 5580 set.
Polybags are all sealed, but the box is open. There are TWO x88 black rubber
bands contained loosely in the tray.
A friend of mine has the same set, but in his set, there are THREE x88 rubber
bands contained loosely in the tray.
I am afraid that the seller might have lost one of the rubber bands, as the box
was open.
I checked the bricklink inventory, but it is flawed. They list two x137 rubber
bands for the set. I don't trust in their list, as it must be x88 instead
of x137. So I also don't trust in the quantity they list.
As I am a collector and it is important for me that the set is complete with
all extra parts, can anybody confirm that there are versions of the set with
only TWO x88 rubber band rings in total and not THREE?
Kind regards,
Jo
|
|
Author: | slave2lego | Posted: | Mar 19, 2019 08:53 | Subject: | 1st time i've inventoried a minifig - help! | Viewed: | 92 times | Topic: | Catalog | Status: | Open | |
|
| Hi, i'm trying to inventory a minifig (sc074) but the inventory page only
has 1 line and I cant work out how to add extra lines for each of the parts?
Also can somone breakdown the torso numbering convention as well?
Cheers
|
Author: | normann1974 | Posted: | Mar 17, 2019 11:55 | Subject: | Marks on 60603? | Viewed: | 116 times | Topic: | Catalog | Status: | Open | |
|
| I found this among my spare parts. It has four small indentations positioned
in a perfect rectangle horizontally centered, so that can't be playwear.
Has anyone seen this before? Could a note be added to the part that sellers may
be interested in knowing which variant is sold just like the glass with large
sprue marks?
/Jan
|
|
Author: | grimmstone | Posted: | Mar 16, 2019 23:59 | Subject: | Infinity gauntlet gems | Viewed: | 99 times | Topic: | Catalog | Status: | Open | |
|
| So what are the infinity gems listed under in the catalog? |
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|