Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | jerzeeg | Posted: | Jul 14, 2019 10:15 | Subject: | collectable minifigures leaflets | Viewed: | 110 times | Topic: | Catalog | Status: | Open | |
|
| Hi,
I could not find anything on the topic :/
Could anyone explain please why are leaflets (instructions) for each minifigure
of the series kept separately in the catalog when they seems to be all the same?
It seems especially weird, when I saw that someone bought leaflet for percival
graves for such high price:
https://www.bricklink.com/v2/catalog/catalogitem.page?I=colhp-22#T=P
while it seems that this leaflet is just pretty the same as all the rest of the
leaflets from this series....
Thx in advance,
J.
|
|
Author: | axaday | Posted: | Jul 13, 2019 15:20 | Subject: | sh289 Robin Cape | Viewed: | 65 times | Topic: | Catalog | Status: | Open | |
|
|
The cape from this Robin matches the cut of the brand new Robin, but if I had
to guess that one looks like starched fabric. The new one is spongy, stretchable.
Can anyone check?
|
Author: | TorontoLego | Posted: | Jul 13, 2019 13:42 | Subject: | 32064 variations | Viewed: | 94 times | Topic: | Catalog | Status: | Open | |
|
| [p=32064c]
Clearly distinguished by the bottom of the brick
[p=32064b]
Is this only a "b" variant if it has the 'thin' corner guides seen from
both faces?
Is this any of these that is not a "b" or "c" based on the above?
OR
Is the distinguishing factor the complete circle support on the inside?
|
|
|
Author: | yorbrick | Posted: | Jul 9, 2019 04:48 | Subject: | Benny's torso 973pb1652c02 | Viewed: | 82 times | Topic: | Catalog | Status: | Open | |
|
| This part is listed as
I have opened seven of the CMF versions and they do not come like this in the
set. The torso comes without the robot arm attached. Is there are reason having
only the assembly in the inventory, and not having it how it actually comes in
the CMF set?
|
|
Author: | blackballoon | Posted: | Jul 6, 2019 23:19 | Subject: | help identify this transformer part? | Viewed: | 107 times | Topic: | Catalog | Status: | Open | |
|
| i saw several similar transformer entries in the catalog but could not figure
out which one to list this as. Can someone kindly help to identify it?
|
|
Author: | axaday | Posted: | Jul 6, 2019 21:33 | Subject: | Question For Someone with Underminer Minifies | Viewed: | 97 times | Topic: | Catalog | Status: | Open | |
|
|
wears this cape
I am usually a fan of dynamically posed catalog pics, but this time I just can't
tell if this piece is the same cut as a new piece that I need to get into the
catalog. Can someone tell me if the attached pic is the same shape?
|
|
|
Author: | samsam2 | Posted: | Jul 6, 2019 12:28 | Subject: | Stickered Assembly numbering BA77pb01 | Viewed: | 48 times | Topic: | Catalog | Status: | Open | |
|
| Not sure if sequence number for multiple stickered assembly parts from same set
should increment the 'pb01' to 'pb02' rather than from BA76pb01
to BA77pb01. The part I'm questioning is [p=BA77pb01] and if it should actually
become [p=BA76pb02]
|
|
Author: | bb1429717 | Posted: | Jul 4, 2019 19:19 | Subject: | 700e H Baseplate? | Viewed: | 104 times | Topic: | Catalog | Status: | Open | |
|
| In the catalog I see there are a few varients of the 700e early baseplate, but
I recently ran across a couple with numbers that werent in the catolog. They
are most similar to the 700eD plates, but to have different featured like the
shape of the cross supports where they cross, and are marked '700 e H'
on the bottom.
Should The 700e H varient be added and/or does anyone know anything about this
baseplate? (sorry I'm very new here or I would attempt to add it myself)
|
|
Author: | mr.misior | Posted: | Jul 4, 2019 18:14 | Subject: | holographic tile ID please | Viewed: | 54 times | Topic: | Catalog | Status: | Open | |
|
| could someone please tell me which set this belongs to.
the face is holographic and only visible at certain angle.
|
|
Author: | yorbrick | Posted: | Jul 4, 2019 07:04 | Subject: | Brand filters (again!) | Viewed: | 153 times | Topic: | Catalog | Status: | Open | |
|
| The AFOL sets are not real LEGO sets, right?
Have they been catalogued incorrectly or are the filters not working correctly?
|
|
Author: | Emperor_Penguin | Posted: | Jun 29, 2019 14:58 | Subject: | Remake the Hero Factory categories? | Viewed: | 96 times | Topic: | Catalog | Status: | Open | |
|
| Right now for the Hero Factory theme, there are 3 categories (Heroes,Villains,Vehicles).
I was wondering if each release wave theme could get its own sub-category (Breakout,
Brain Attack, Invasion from below, ETC...)
I can use the catalog add/change feature, just wondering if it should be done
first.
|
Author: | dakotakidsshop | Posted: | Jun 24, 2019 11:18 | Subject: | brown rotating box with part # 5483 | Viewed: | 91 times | Topic: | Catalog | Status: | Open | |
|
| looking for help figuring out what this is and what it is used for. part # non
it 5483 but dont seem to yield any results when searching that #.
|
|
Author: | axaday | Posted: | Jun 23, 2019 17:16 | Subject: | Does 970653-1 come apart? | Viewed: | 97 times | Topic: | Catalog | Status: | Open | |
|
| [p=970653-1]
I got two of these in a set that will need its inventory updated. But I am trying
to figure it out. The part is inventoried but it doesn’t really look playable.
I gave it a soft tug to see if it was just clutched and I don’t think it is.
|
Author: | ForTheGirls | Posted: | Jun 23, 2019 08:44 | Subject: | Flesh colored yoda, no markings | Viewed: | 197 times | Topic: | Catalog | Status: | Open | |
|
| Is this s legitimate LEGO head? I dont see it in the catalog. |
|
Author: | Brick_Qc | Posted: | Jun 22, 2019 20:00 | Subject: | How many polybags in a 4561 set ? | Viewed: | 64 times | Topic: | Catalog | Status: | Open | |
|
| Hi, I just got a new opened 4561 with sealed polybags and I'd like to know
if it's complete. I have 8 polybags with pictures and one without containing
1x16 bricks.
TIA
|
|
Author: | yorbrick | Posted: | Jun 20, 2019 14:52 | Subject: | col08-14 ACTOR | Viewed: | 89 times | Topic: | Catalog | Status: | Open | |
|
|
Is there a reason this keeps getting changed?
This set was originally listed as Actor, it was then changed to Thespian. I asked
for the Actor name to be reinstated, which it was, and then it was removed again.
The minifigure version has both names:
Why can the set not keep both names?
And on their webpages, LEGO refer to it as ACTOR. If it can have only one name,
then surely it should be the LEGO one.
https://www.lego.com/en-gb/themes/minifigures/products/lego-minifigures-8833
|
|
|
Author: | Fynbos | Posted: | Jun 20, 2019 11:13 | Subject: | Cookie Cutters - bought in Billund - 853890 | Viewed: | 124 times | Topic: | Catalog | Status: | Open | |
|
| Hi,
I am unable to find in this catalogue the item I just bought in Billund:
5 cookie cuttters, LEGO 853890, item 6255877, EAN 673419306935.
Am I searching wrong or is this not yet listed here?
Thanks
Florian
|
|
Author: | JXC123 | Posted: | Jun 20, 2019 00:18 | Subject: | Cycle Shop set 6699-1 | Viewed: | 96 times | Topic: | Catalog | Status: | Open | |
|
| I have downloaded the parts lists from many sources, incl blink and all seem
to include red door 73435c01 as the front door. Clearly the pictures show a need
for door 73436c01 not the one in the catalogue.
Has anyone else run into this - it has cost me 2 wrong door so far.
JXC 123. John
|
|
Author: | crazylegoman | Posted: | Jun 17, 2019 20:35 | Subject: | New part that doesn't exist without printing | Viewed: | 107 times | Topic: | Catalog | Status: | Open | |
|
| There's a new part I want to add to the catalog, and so far it only exists
with a printing on it. Is the proper procedure to add a sort of "placeholder"
entry for the actual new mold/part that has no printing, and then add the new
printed part that I have? I will upload a photo of the printed version I have,
but of course, cannot for the base part.
Thanks,
David
|
Author: | normann1974 | Posted: | Jun 15, 2019 16:32 | Subject: | Other counterparts for set 7725-1? | Viewed: | 53 times | Topic: | Catalog | Status: | Open | |
|
|
Will you accept other counterparts (stickered doors) for this set? The sticker
sheet comes with many different railway names, and I have doors with "DSB" stickers.
/Jan
|
Author: | brickconnector | Posted: | Jun 13, 2019 03:47 | Subject: | How to add instruction weight? | Viewed: | 43 times | Topic: | Catalog | Status: | Open | |
|
| I cannot add the weight of instruction book 8307-1. (177 grams). If I go to https://www.bricklink.com/catalogReq.asp
which category should I choose?
Set | Part | Minifig | Book | Gear | Catalog
Whichever I choose it doesn't work.
|
Author: | run4ever | Posted: | Jun 12, 2019 14:32 | Subject: | help to find a item | Viewed: | 84 times | Topic: | Catalog | Status: | Open | |
|
| Hi guys!
I need to know the code of the part in the attached image!
Anyone can help me?
Thanks a lot!
|
|
Author: | mikemuscar | Posted: | Jun 11, 2019 11:42 | Subject: | parts | Viewed: | 60 times | Topic: | Catalog | Status: | Open | |
|
| help I'm looking for parts. 1 what Lego digital designer calls mini alien
pet. 2 what Lego digital designer calls shell morning star. dose anyone
have this parts or know wat set they are in. also where if anywhere I can find
them in the studio program.
|
Author: | mjsheller | Posted: | Jun 9, 2019 14:57 | Subject: | adding something to the catalog | Viewed: | 73 times | Topic: | Catalog | Status: | Open | |
|
| Set 8769 Visorak's Gate
I have piece 6082 and 6083 both with stickers applied. However to list them
in my store there is no number assigned to these pieces with stickers.
How do I go about asking for these two items to be added to your catalog?
Regards,
Josie
Carefree Building Blocks
|
|
|
Author: | C0lsanders_ | Posted: | May 29, 2019 08:50 | Subject: | First time addition, how long | Viewed: | 165 times | Topic: | Catalog | Status: | Open | |
|
| I made 2 additions to the catalog the other day (2 tiles, from https://www.bricklink.com/message.asp?ID=1141099).
How long is typical for them to be approved and added? And, can I perhaps expect
a message or some other notification that "your item has been added", or similar?
Thanks,
Miles (C0lsanders_)
|
Author: | mokibricks | Posted: | May 27, 2019 10:11 | Subject: | 62436c01pb01 - year released | Viewed: | 58 times | Topic: | Catalog | Status: | Open | |
|
| Hi,
I just have a 62436c01pb01 in my hands also its pair and both have 2006 as the
year on them. Do I have a different part or the catalog needs an update?
Thanks,
Tamas
|
|
|
Author: | novabrick | Posted: | May 27, 2019 04:12 | Subject: | Magnetic Dooku | Viewed: | 80 times | Topic: | Catalog | Status: | Open | |
|
| Hi Guys.
We have a Count Dooku Clonewars figure
on a magnet from
It's only missing the lightsaber.
However different to the listing the minifig is permanently glued to the base
+ Torso to the Legs. Basically only Head arms and cape are removable. Is there
a plan to include these glued Magnetfigs in the catalog? Or is only the complete
set considered sellable.
Also there maybe should be added a notice to those sets in regards of being glued
or with lose minifigs.
Regards
Christian
novabrick-team
|
|
Author: | clrv4000 | Posted: | May 26, 2019 22:49 | Subject: | 11650c01 Vehicle Base sub-components | Viewed: | 53 times | Topic: | Catalog | Status: | Open | |
|
| I was wondering if anyone has attempted/managed to separate the joined sub-components
that make up this assembly. As far as I can tell on mine, doing this would cause
damage. I'm curious to know what the 'rivet-like' pins on the bottom
look like separated and whether they could serve another useful purpose on their
own. I would hazard a guess that it is stud diameter for a length of one plate-thickness
with a bar-size (or similar) hole in the center on the inside.
I presume there is no LEGO-published part number for the pin alone.
|
|
Author: | seymour3113 | Posted: | May 25, 2019 14:10 | Subject: | 4070a | Viewed: | 125 times | Topic: | Catalog | Status: | Open | |
|
| I have several of these bricks (4070a). They are being deleted from catalog.
Should I just list them as 4070?
|
Author: | Stuart9 | Posted: | May 23, 2019 10:13 | Subject: | Old Mosaic pieces. | Viewed: | 113 times | Topic: | Catalog | Status: | Open | |
|
| Can I ask what proof is required to submit the rectangular version of the 3062oldtile
?
I have both the one shown below and the rectangular version without stud that
I suppose would be something like 3005oldtile.
Not ready to list just yet but might want to do so sometime this year.
[p=3062oldtile]
|
Author: | sheppy02 | Posted: | May 22, 2019 05:40 | Subject: | which is the correct listing? | Viewed: | 113 times | Topic: | Catalog | Status: | Open | |
|
| Hello All,
I am just listing some items, I had one
[p=630-3]
trying to find the others in my inventory no joy, searched by brick separator
my others are listed
which are up for approx. 8 times the price. what is the difference? or are they
essentially the same products?
Thanks
Alex
|
|
Author: | Cob | Posted: | May 19, 2019 15:56 | Subject: | Protest of 3830c01 marked for deletion | Viewed: | 214 times | Topic: | Catalog | Status: | Open | |
|
| In protest of 3830c01 being marked for deletion I am not going to sell either
3830 or 3831 on BrickLink.
I sell used bricks, nearly all of these come to me as a complete hinge, in order
to sell them I must either sell them as a pair or manually separate them and
then list them separately.
I still don't understand why they were marked for deletion. There only single
colors in the catalog, no crossed colors, no decorated items. Nothing but plain
single colors.
I will sell them on other well known sites.
Cob
|
|
|
Author: | rapar | Posted: | May 13, 2019 10:45 | Subject: | Please approve LEGO DC 30623: Shazam! Polybag | Viewed: | 244 times | Topic: | Catalog | Status: | Open | |
|
| Hello,
Can you please approve LEGO DC Super Heroes: 30623 Shazam Polybag? I have
some in my hands. This polybag can already be purchased in Poland.
If you need more information please let me know.
Thank you!
|
|
Author: | TorontoLego | Posted: | May 13, 2019 04:37 | Subject: | Does part 6057 (Short Rigging) need a variant | Viewed: | 89 times | Topic: | Catalog | Status: | Open | |
|
| The four black ones and one brown one are about a plates width shorter. I can't
be the first one to notice this!
|
|
Author: | joesecc | Posted: | May 12, 2019 08:12 | Subject: | Power functions - Hub | Viewed: | 82 times | Topic: | Catalog | Status: | Open | |
|
| Hi,
What are the differences between the Power function Hubs: 88009 and bb892c01?
Externally they look the same.
|
|
Author: | axaday | Posted: | May 10, 2019 15:45 | Subject: | Iron Man Mark 43 Issue | Viewed: | 114 times | Topic: | Catalog | Status: | Open | |
|
| and are both named Mark 43 in the catalog and though they
are very similar, they are distinguishable and I fear there may be an error.
But maybe not?
came in 3 Age of Ultron sets and was originally named "Iron Man MK43".
Tony did use Mark 43 in that movie. And you can recognize design elements from
it in the minifig. All 3 of the scenes depicted in the Lego sets were when Tony
was wearing 43 in the movie. In short, this seems like a closed case.
came out last year, retroactively an Age of Ultron set. It is very
similar to sh167. There is a slight deco change to the legs that reflects nothing
on Mark 33. There is a larger change to the upper torso with a large gray panels
with silver cables. This also doesn't depict anything in the Mark 33 Armor
or the Mark 34 used late in the movie. I don't readily find an MCU Armor
with that design element. What's worse (and embarrassing) is that this minifig
was originally named "Iron Man (76105)". It was me that changed it to "Iron
Man Mk 43 (Trans-Clear Head)" and then to "Iron Man Mark 43 Armor (Trans-Clear
Head)" and I have no recollection of what information I was going on. Maybe
the instructions or box say so? I haven't seen the movie since it came out.
Does this perhaps depict damage that Hulk did to the Armor?
|
|
Author: | avyz66 | Posted: | May 10, 2019 15:29 | Subject: | Star Wars MiniFigs | Viewed: | 84 times | Topic: | Catalog | Status: | Open | |
|
| Not sure if this is in the correct area to post. I am wanting to start and complete
a Star Wars MiniFig collection. I am looking for a list with variants included
to help me with this. Any push in the right direction is appreciated.
|
Author: | avyz66 | Posted: | May 10, 2019 14:52 | Subject: | Star Wars MiniFigs | Viewed: | 62 times | Topic: | Catalog | Status: | Open | |
|
| Not sure if this is in the correct area to post. I am wanting to start and complete
a Star Wars MiniFig collection. I am looking for a list with variants included
to help me with this. Any push in the right direction is appreciated.
|
Author: | palenjo | Posted: | May 8, 2019 17:40 | Subject: | 3009p01 | Viewed: | 79 times | Topic: | Catalog | Status: | Open | |
|
| Hi!
I would just like to know if the entry 3009p01 encompasses entry 3009p01e (embossed
print), since there is no separate entry 3009p01s with surface print (or whatever
part id the part with surface print would receive)?
Johan
|
|
Author: | paolocolombo | Posted: | May 8, 2019 13:39 | Subject: | Set 71040 Disney castle | Viewed: | 113 times | Topic: | Catalog | Status: | Open | |
|
| Goodmorning everyone!
Set 71040: are there 2 versions? I noticed that the front box "type 1" under
the word "16+" has:
- the number of pieces
- the word "building toy"
- has 7 minifig.
The front box type 2 does NOT have the number of pieces and does not have the
word "building toy"; has 5 minifig.
Are there any fakes?
Also on the small side where there are minifigs in the type 2 box there are no
small writings.
Thanks as always for the info.
Paul
|
Author: | Hygrotus | Posted: | May 8, 2019 05:38 | Subject: | Mystery part | Viewed: | 293 times | Topic: | Catalog | Status: | Open | |
|
| I have pending approval something like this
[p=Unknown]
Did anybody see something like this? Anybody knows anything about it?
|
|
Author: | dadebrick | Posted: | May 4, 2019 11:14 | Subject: | Part identification 3229a ; 3230a | Viewed: | 39 times | Topic: | Catalog | Status: | Open | |
|
| How do i identify curved inside or curved outside. Thank you all |
Author: | normann1974 | Posted: | May 4, 2019 09:32 | Subject: | Vintage version of 4175? | Viewed: | 84 times | Topic: | Catalog | Status: | Open | |
|
| When sorting my parts
I've noticed some blue and black versions that look different. The shade
of blue is a bit greenish (image may not show this clearly) and the shade of
blue is a bit greyish. They are easily identifiable by their color variation
but they can also be identified by some whitening/fraying along the edges. I
believe they're made from a softer plastic than usual. Are these vintage
or from certain special sets?
/Jan
|
|
|
Author: | 92ebii | Posted: | May 3, 2019 07:38 | Subject: | 3039p23 variations | Viewed: | 64 times | Topic: | Catalog | Status: | Open | |
|
| Hello,
I have in my possession two types of 3039p23 Light Gray Computer Screen with
buttons on the right side.
The regular version (left) has buttons in Yellow, Green and Red - reading downwards.
The other version (right) has the Yellow and Red buttons swapped.
Would this difference be enough for a new code number or at least a mention on
the 3039p23 page.
Regards,
Karl.
|
|
Author: | bb827804 | Posted: | May 1, 2019 20:45 | Subject: | Part Identification? | Viewed: | 113 times | Topic: | Catalog | Status: | Open | |
|
| Can anyone out there help identify the below red colored technic part ID number?
Thank you from Oregon.
|
|
Author: | narval | Posted: | May 1, 2019 07:57 | Subject: | classic space minifig | Viewed: | 128 times | Topic: | Catalog | Status: | Open | |
|
| hi
did i create it when i was a child ? or is it unlisted ?
|
|
Author: | bb564489 | Posted: | Apr 27, 2019 17:38 | Subject: | New minifigures | Viewed: | 80 times | Topic: | Catalog | Status: | Open | |
|
| Has anyone entered into the catalog the new Disney minifigures 2 71024.
Thanks
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|