Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | crazylegoman | Posted: | Jun 17, 2019 20:35 | Subject: | New part that doesn't exist without printing | Viewed: | 107 times | Topic: | Catalog | Status: | Open | |
|
| There's a new part I want to add to the catalog, and so far it only exists
with a printing on it. Is the proper procedure to add a sort of "placeholder"
entry for the actual new mold/part that has no printing, and then add the new
printed part that I have? I will upload a photo of the printed version I have,
but of course, cannot for the base part.
Thanks,
David
|
Author: | normann1974 | Posted: | Jun 15, 2019 16:32 | Subject: | Other counterparts for set 7725-1? | Viewed: | 53 times | Topic: | Catalog | Status: | Open | |
|
|
Will you accept other counterparts (stickered doors) for this set? The sticker
sheet comes with many different railway names, and I have doors with "DSB" stickers.
/Jan
|
Author: | brickconnector | Posted: | Jun 13, 2019 03:47 | Subject: | How to add instruction weight? | Viewed: | 43 times | Topic: | Catalog | Status: | Open | |
|
| I cannot add the weight of instruction book 8307-1. (177 grams). If I go to https://www.bricklink.com/catalogReq.asp
which category should I choose?
Set | Part | Minifig | Book | Gear | Catalog
Whichever I choose it doesn't work.
|
Author: | run4ever | Posted: | Jun 12, 2019 14:32 | Subject: | help to find a item | Viewed: | 84 times | Topic: | Catalog | Status: | Open | |
|
| Hi guys!
I need to know the code of the part in the attached image!
Anyone can help me?
Thanks a lot!
|
|
Author: | mikemuscar | Posted: | Jun 11, 2019 11:42 | Subject: | parts | Viewed: | 60 times | Topic: | Catalog | Status: | Open | |
|
| help I'm looking for parts. 1 what Lego digital designer calls mini alien
pet. 2 what Lego digital designer calls shell morning star. dose anyone
have this parts or know wat set they are in. also where if anywhere I can find
them in the studio program.
|
Author: | mjsheller | Posted: | Jun 9, 2019 14:57 | Subject: | adding something to the catalog | Viewed: | 73 times | Topic: | Catalog | Status: | Open | |
|
| Set 8769 Visorak's Gate
I have piece 6082 and 6083 both with stickers applied. However to list them
in my store there is no number assigned to these pieces with stickers.
How do I go about asking for these two items to be added to your catalog?
Regards,
Josie
Carefree Building Blocks
|
|
|
Author: | C0lsanders_ | Posted: | May 29, 2019 08:50 | Subject: | First time addition, how long | Viewed: | 165 times | Topic: | Catalog | Status: | Open | |
|
| I made 2 additions to the catalog the other day (2 tiles, from https://www.bricklink.com/message.asp?ID=1141099).
How long is typical for them to be approved and added? And, can I perhaps expect
a message or some other notification that "your item has been added", or similar?
Thanks,
Miles (C0lsanders_)
|
Author: | mokibricks | Posted: | May 27, 2019 10:11 | Subject: | 62436c01pb01 - year released | Viewed: | 58 times | Topic: | Catalog | Status: | Open | |
|
| Hi,
I just have a 62436c01pb01 in my hands also its pair and both have 2006 as the
year on them. Do I have a different part or the catalog needs an update?
Thanks,
Tamas
|
|
|
Author: | novabrick | Posted: | May 27, 2019 04:12 | Subject: | Magnetic Dooku | Viewed: | 80 times | Topic: | Catalog | Status: | Open | |
|
| Hi Guys.
We have a Count Dooku Clonewars figure
on a magnet from
It's only missing the lightsaber.
However different to the listing the minifig is permanently glued to the base
+ Torso to the Legs. Basically only Head arms and cape are removable. Is there
a plan to include these glued Magnetfigs in the catalog? Or is only the complete
set considered sellable.
Also there maybe should be added a notice to those sets in regards of being glued
or with lose minifigs.
Regards
Christian
novabrick-team
|
|
Author: | clrv4000 | Posted: | May 26, 2019 22:49 | Subject: | 11650c01 Vehicle Base sub-components | Viewed: | 53 times | Topic: | Catalog | Status: | Open | |
|
| I was wondering if anyone has attempted/managed to separate the joined sub-components
that make up this assembly. As far as I can tell on mine, doing this would cause
damage. I'm curious to know what the 'rivet-like' pins on the bottom
look like separated and whether they could serve another useful purpose on their
own. I would hazard a guess that it is stud diameter for a length of one plate-thickness
with a bar-size (or similar) hole in the center on the inside.
I presume there is no LEGO-published part number for the pin alone.
|
|
Author: | seymour3113 | Posted: | May 25, 2019 14:10 | Subject: | 4070a | Viewed: | 125 times | Topic: | Catalog | Status: | Open | |
|
| I have several of these bricks (4070a). They are being deleted from catalog.
Should I just list them as 4070?
|
Author: | Stuart9 | Posted: | May 23, 2019 10:13 | Subject: | Old Mosaic pieces. | Viewed: | 113 times | Topic: | Catalog | Status: | Open | |
|
| Can I ask what proof is required to submit the rectangular version of the 3062oldtile
?
I have both the one shown below and the rectangular version without stud that
I suppose would be something like 3005oldtile.
Not ready to list just yet but might want to do so sometime this year.
[p=3062oldtile]
|
Author: | sheppy02 | Posted: | May 22, 2019 05:40 | Subject: | which is the correct listing? | Viewed: | 113 times | Topic: | Catalog | Status: | Open | |
|
| Hello All,
I am just listing some items, I had one
[p=630-3]
trying to find the others in my inventory no joy, searched by brick separator
my others are listed
which are up for approx. 8 times the price. what is the difference? or are they
essentially the same products?
Thanks
Alex
|
|
Author: | Cob | Posted: | May 19, 2019 15:56 | Subject: | Protest of 3830c01 marked for deletion | Viewed: | 214 times | Topic: | Catalog | Status: | Open | |
|
| In protest of 3830c01 being marked for deletion I am not going to sell either
3830 or 3831 on BrickLink.
I sell used bricks, nearly all of these come to me as a complete hinge, in order
to sell them I must either sell them as a pair or manually separate them and
then list them separately.
I still don't understand why they were marked for deletion. There only single
colors in the catalog, no crossed colors, no decorated items. Nothing but plain
single colors.
I will sell them on other well known sites.
Cob
|
|
|
Author: | rapar | Posted: | May 13, 2019 10:45 | Subject: | Please approve LEGO DC 30623: Shazam! Polybag | Viewed: | 244 times | Topic: | Catalog | Status: | Open | |
|
| Hello,
Can you please approve LEGO DC Super Heroes: 30623 Shazam Polybag? I have
some in my hands. This polybag can already be purchased in Poland.
If you need more information please let me know.
Thank you!
|
|
Author: | TorontoLego | Posted: | May 13, 2019 04:37 | Subject: | Does part 6057 (Short Rigging) need a variant | Viewed: | 89 times | Topic: | Catalog | Status: | Open | |
|
| The four black ones and one brown one are about a plates width shorter. I can't
be the first one to notice this!
|
|
Author: | joesecc | Posted: | May 12, 2019 08:12 | Subject: | Power functions - Hub | Viewed: | 81 times | Topic: | Catalog | Status: | Open | |
|
| Hi,
What are the differences between the Power function Hubs: 88009 and bb892c01?
Externally they look the same.
|
|
Author: | axaday | Posted: | May 10, 2019 15:45 | Subject: | Iron Man Mark 43 Issue | Viewed: | 114 times | Topic: | Catalog | Status: | Open | |
|
| and are both named Mark 43 in the catalog and though they
are very similar, they are distinguishable and I fear there may be an error.
But maybe not?
came in 3 Age of Ultron sets and was originally named "Iron Man MK43".
Tony did use Mark 43 in that movie. And you can recognize design elements from
it in the minifig. All 3 of the scenes depicted in the Lego sets were when Tony
was wearing 43 in the movie. In short, this seems like a closed case.
came out last year, retroactively an Age of Ultron set. It is very
similar to sh167. There is a slight deco change to the legs that reflects nothing
on Mark 33. There is a larger change to the upper torso with a large gray panels
with silver cables. This also doesn't depict anything in the Mark 33 Armor
or the Mark 34 used late in the movie. I don't readily find an MCU Armor
with that design element. What's worse (and embarrassing) is that this minifig
was originally named "Iron Man (76105)". It was me that changed it to "Iron
Man Mk 43 (Trans-Clear Head)" and then to "Iron Man Mark 43 Armor (Trans-Clear
Head)" and I have no recollection of what information I was going on. Maybe
the instructions or box say so? I haven't seen the movie since it came out.
Does this perhaps depict damage that Hulk did to the Armor?
|
|
Author: | avyz66 | Posted: | May 10, 2019 15:29 | Subject: | Star Wars MiniFigs | Viewed: | 84 times | Topic: | Catalog | Status: | Open | |
|
| Not sure if this is in the correct area to post. I am wanting to start and complete
a Star Wars MiniFig collection. I am looking for a list with variants included
to help me with this. Any push in the right direction is appreciated.
|
Author: | avyz66 | Posted: | May 10, 2019 14:52 | Subject: | Star Wars MiniFigs | Viewed: | 62 times | Topic: | Catalog | Status: | Open | |
|
| Not sure if this is in the correct area to post. I am wanting to start and complete
a Star Wars MiniFig collection. I am looking for a list with variants included
to help me with this. Any push in the right direction is appreciated.
|
Author: | palenjo | Posted: | May 8, 2019 17:40 | Subject: | 3009p01 | Viewed: | 79 times | Topic: | Catalog | Status: | Open | |
|
| Hi!
I would just like to know if the entry 3009p01 encompasses entry 3009p01e (embossed
print), since there is no separate entry 3009p01s with surface print (or whatever
part id the part with surface print would receive)?
Johan
|
|
Author: | paolocolombo | Posted: | May 8, 2019 13:39 | Subject: | Set 71040 Disney castle | Viewed: | 113 times | Topic: | Catalog | Status: | Open | |
|
| Goodmorning everyone!
Set 71040: are there 2 versions? I noticed that the front box "type 1" under
the word "16+" has:
- the number of pieces
- the word "building toy"
- has 7 minifig.
The front box type 2 does NOT have the number of pieces and does not have the
word "building toy"; has 5 minifig.
Are there any fakes?
Also on the small side where there are minifigs in the type 2 box there are no
small writings.
Thanks as always for the info.
Paul
|
Author: | Hygrotus | Posted: | May 8, 2019 05:38 | Subject: | Mystery part | Viewed: | 293 times | Topic: | Catalog | Status: | Open | |
|
| I have pending approval something like this
[p=Unknown]
Did anybody see something like this? Anybody knows anything about it?
|
|
Author: | dadebrick | Posted: | May 4, 2019 11:14 | Subject: | Part identification 3229a ; 3230a | Viewed: | 39 times | Topic: | Catalog | Status: | Open | |
|
| How do i identify curved inside or curved outside. Thank you all |
Author: | normann1974 | Posted: | May 4, 2019 09:32 | Subject: | Vintage version of 4175? | Viewed: | 84 times | Topic: | Catalog | Status: | Open | |
|
| When sorting my parts
I've noticed some blue and black versions that look different. The shade
of blue is a bit greenish (image may not show this clearly) and the shade of
blue is a bit greyish. They are easily identifiable by their color variation
but they can also be identified by some whitening/fraying along the edges. I
believe they're made from a softer plastic than usual. Are these vintage
or from certain special sets?
/Jan
|
|
|
Author: | 92ebii | Posted: | May 3, 2019 07:38 | Subject: | 3039p23 variations | Viewed: | 64 times | Topic: | Catalog | Status: | Open | |
|
| Hello,
I have in my possession two types of 3039p23 Light Gray Computer Screen with
buttons on the right side.
The regular version (left) has buttons in Yellow, Green and Red - reading downwards.
The other version (right) has the Yellow and Red buttons swapped.
Would this difference be enough for a new code number or at least a mention on
the 3039p23 page.
Regards,
Karl.
|
|
Author: | bb827804 | Posted: | May 1, 2019 20:45 | Subject: | Part Identification? | Viewed: | 113 times | Topic: | Catalog | Status: | Open | |
|
| Can anyone out there help identify the below red colored technic part ID number?
Thank you from Oregon.
|
|
Author: | narval | Posted: | May 1, 2019 07:57 | Subject: | classic space minifig | Viewed: | 128 times | Topic: | Catalog | Status: | Open | |
|
| hi
did i create it when i was a child ? or is it unlisted ?
|
|
Author: | bb564489 | Posted: | Apr 27, 2019 17:38 | Subject: | New minifigures | Viewed: | 80 times | Topic: | Catalog | Status: | Open | |
|
| Has anyone entered into the catalog the new Disney minifigures 2 71024.
Thanks
|
Author: | FreeStorm | Posted: | Apr 27, 2019 13:30 | Subject: | Add CM and studs on wire name | Viewed: | 58 times | Topic: | Catalog | Status: | Open | |
|
| Because it's easer to check the length,
I wanted to add [cm] and [Studs] on wires of category [Electric, Wire & Connector]
For example:
Electric, Power Functions Extension Wire with one Light Bluish Gray End, 25
Studs (20cm) Long
What do you think?
|
Author: | Quaysretire | Posted: | Apr 24, 2019 17:53 | Subject: | Help identify 2 pieces | Viewed: | 107 times | Topic: | Catalog | Status: | Open | |
|
| I have 2 pieces : 44570 dark grey and light grey and on the back they say 2002
however the catalog only starts from 2003 . Help please . Very new to all of
this thanks .
|
Author: | yorbrick | Posted: | Apr 22, 2019 07:40 | Subject: | Brand filter not working | Viewed: | 63 times | Topic: | Catalog | Status: | Open | |
|
| The brand filter is not working correctly. I have LEGO only turned on, yet I
am shown adverts for non-LEGO items during my searches. Is it possible to turn
off non-LEGO products?
|
|
Author: | DamoB | Posted: | Apr 20, 2019 13:50 | Subject: | Help identifying a brick | Viewed: | 111 times | Topic: | Catalog | Status: | Open | |
|
| Hi there, hope someone can help.
I've found what looks like a 7049b but with a white rather than red interior
and 'Pat Pend' on the bottom. It's from a box of my own childhood
Lego so it's definitely from the early 80's - should I list this as a
7049b or is there a better description?
Grateful for some advice...
|
|
Author: | SRC | Posted: | Apr 20, 2019 13:40 | Subject: | size and weight 40334 Avengers Tower | Viewed: | 50 times | Topic: | Catalog | Status: | Open | |
|
| size and weight 40334 Avengers Tower
weight is 290g
dimensions are 26 x 6 x 14 cm
SRC
|
Author: | Alang41 | Posted: | Apr 20, 2019 04:01 | Subject: | Help recognise piece | Viewed: | 104 times | Topic: | Catalog | Status: | Open | |
|
| I bought a job lot of older Lego and there was a lot of plants and trees. And
there is 3 parts I can’t recognise from anywhere
|
|
Author: | smink45 | Posted: | Apr 17, 2019 13:41 | Subject: | 111901-1 ninjago legacy foilpack | Viewed: | 54 times | Topic: | Catalog | Status: | Open | |
|
| Hi,
I have 111901-1 as a foilpack but this set number is given to another set. Is
it possible to make this set correct with the right set numbers?
Jeroen
|
|
|
Author: | SylvainLS | Posted: | Apr 16, 2019 19:49 | Subject: | Lengths in “L” and 18654 | Viewed: | 120 times | Topic: | Catalog | Status: | Open | |
|
| I’m wondering what’s the rationale for having changed the name (and dimensions)
of
from “1 L” to “2/3 L”.
I can’t see where it’s 0.67L.
Especially if I compare it to
and their variants, or with
and other liftarms/beams, or all the connectors with “# L” in their descriptions.
In the same way, its new dimensions are 1 x 1 x 0.67. As it’s a cylinder, it
means the 0.67 is supposed to apply to its height. But its height is exactly
1 stud, which is 5/6th = 0.83 brick, not 2/3rd = 0.67, and, anyway, “L” means
stud, not brick, so 1 = 1.
Therefore, I strongly believe its name should have stayed “Technic, Pin Connector
Round 1 L” and its dimensions should be 1 x 1 x 0.83.
(Actually, its diameter is a shy less than 1 stud, so its dimensions should be
0.9something x 0.9something x 0.83 but all the liftarms have the same width and
are said to be 1 stud wide.)
Not filing a proper catalogue change request because I really would want to know
the reasoning here, not play ping-pong.
|
|
Author: | BEL | Posted: | Apr 14, 2019 08:58 | Subject: | Towel | Viewed: | 140 times | Topic: | Catalog | Status: | Open | |
|
| Hello,
Is there a difference between part 72965 and part Belville towel 5 ×14 ? I don't
see it.
|
Author: | axaday | Posted: | Apr 13, 2019 10:11 | Subject: | Have Rubber Bands Been Consistent? | Viewed: | 69 times | Topic: | Catalog | Status: | Open | |
|
| I have quite a few rubber bands here and some more to post soon. I have generally
been pretty non-critical when parting out Technic sets with old rubber bands,
but I have one I'm not sure about at the moment and all this is to say:
If we edited the names of the old rubber bands to give approximate "diameter
at rest" would they still have in just a few size classes or would we find 20
size classes?
|
|
Author: | SteveDJ | Posted: | Apr 12, 2019 14:28 | Subject: | Is 21313 Inv correct? (Ship in Bottle) | Viewed: | 91 times | Topic: | Catalog | Status: | Open | |
|
| The inventory for Ship in a Bottle shows these two parts:
...both indicating that the print of the continents should be Reddish Brown.
I recently tried to purchase the halves from a Bricklink Seller, only to receive
Brown continents, as per
and
In discussing the situation with the seller, they said they had "Parted Out"
4 such Ship in Bottle sets, yet all the globe pieces in their inventory (including
another 3 or 4 pairs they already had) were the same ... Brown!
Is there some way to verify if the globes in the set might have been different
print colors throughout the manufacture run of Ship in a Bottle?
If you have a Ship in a Bottle set built, take a look at what color the continents
are for you ... perhaps Brown is a valid Alternate that should be added to the
inventory?
|
|
Author: | buildingfactory | Posted: | Apr 12, 2019 09:29 | Subject: | help by brick 2x2 | Viewed: | 86 times | Topic: | Catalog | Status: | Open | |
|
| i don´t find the right item part ID for middle and right brick 2x2
i have 3 different brick 2x2 black
left Brick 2 x 2 without side support and without Two Vertical Lines Each Side
middle 3003? (same as frosted?)
right with cross support number?
|
|
Author: | Vampi | Posted: | Apr 11, 2019 12:43 | Subject: | Set 70822 | Viewed: | 87 times | Topic: | Catalog | Status: | Open | |
|
| Almost half of the past are not listed.Please complete
Thanks
Best Regards Vampi
|
|
Author: | axaday | Posted: | Apr 10, 2019 06:37 | Subject: | 9605-3 Pic Request | Viewed: | 66 times | Topic: | Catalog | Status: | Open | |
|
| The picture of is the larger version with 1500 pieces. There is a
smaller set with the same number that has only 268 pieces. Can someone provide
a picture of that set for the catalog?
|
Author: | cgphoenix | Posted: | Apr 10, 2019 03:50 | Subject: | Image for iphone case 5002518b | Viewed: | 76 times | Topic: | Catalog | Status: | Open | |
|
| Hi!
The main image for the abovementioned iPhone Case is broken, the second one looks
good. Could please someone set the second pic as the main pic?
Thanks!
Chris
|
|
Author: | velocity.rex | Posted: | Apr 8, 2019 11:17 | Subject: | Keffiyeh vs Turban | Viewed: | 111 times | Topic: | Catalog | Status: | Open | |
|
| I get a little annoyed every time I encounter this piece.
It's always the same cycle, I search "turban" because it's very similar
to a turban.
and all that pops up are these;
&
So then I remember that the piece I'm looking for is on a few of the Prince
of Persia minifigs so I go to catalog, minifigs, prince of persia, and then scroll
until I find one with the matching headgear, and then drill down into it's
inventory to find that it's called a "Keffiyeh"
to which my response is, "oh, well, I'll probably never remember that..."
I wish the description was "Headgear Headdress Cloth Wrap Keffiyeh (Turban)"
even if it's not technically a turban. It would help me find it faster in
the future.
At any rate, taking the time to type this all out should help me remember in
the future and I discovered that one only has to type "kef*" in the headgear
search and this pops up so I should be able to remember those 3 letters at least
going forward.
Took me awhile to remember "kepi" for this part too, but I remembered eventually.
|
|
Author: | edk | Posted: | Apr 8, 2019 09:41 | Subject: | inconsistencies | Viewed: | 213 times | Topic: | Catalog | Status: | Open | |
|
| why is a plate modified when is a tile modified? |
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|