Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | MontagueBrick  | | Posted: | Nov 24, 2018 17:22 | | Subject: | Automatic price while listing items | | Viewed: | 91 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| I just bought a MacBook Pro and it is very fast! But it has got me wishing that
Bricklink had a seller feature that would automatically have the average price
(or what ever price you set it as) put in the box while adding items like brickOwl
does. I also love how brickOwl has the option to add the same part in multiple
colors at the same time and I really wish Bricklink had the same! I also like
it that if I posted a suggestion in the BrickOwl Forum for a new seller feature,
it would be done in a matter of a few minutes (most likely). I hope this seller
feature suggestion can be acted upon quickly and not years later to never.
Rainey 
|
 |
| Author: | shovhans | | Posted: | Nov 22, 2018 15:56 | | Subject: | Part out value may not always be accurate | | Viewed: | 130 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Dear bricklink development team,
Currently the "Part Out Value" page shows the value in average, which may not
be accurate if any seller posts an item with very high, or inaccurate price.
To better represent the part out value of a set, we need to add the following
additional metrics:
1. Standard deviation of the Average value shown
2. Median value
3. Breakdown list of all items with the above metrics for each item. Additionally
we would like to see the count for each item.
Thanks
shovhans
|
|
| Author: | smlgraphics | | Posted: | Nov 19, 2018 16:00 | | Subject: | Parts Look-up tool | | Viewed: | 113 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| So we all have want lists, right?
Wouldn't it be cool to be able to take a want list and instead of looking
for stores that have all the individual parts, do a search against "sets" or
multiples of sets that have all the parts on a want list.
Everything needed to make this tool already exists on Bricklink.
Parts want list - check
Sets, parts inventory - check (the part out tool)
This function could be added to the Buy section like the distillers to get from
the fewest stores, or best price etc - add sets to buy that have all the parts.
Then a shopper could shop for complete sets to buy from sellers or determine
that they already have the sets in their own collection to build the MOC they
are shopping for pieces for.
Example: I bought the instructions for the UCS U-wing project by Mirko (Awesome
MOC by the way and beautiful instruction book)
uploaded the parts list 430 different parts 3300 pieces total.
I would love to know if I could buy 4-5 sets to get all the parts I need to build
the UCS U-wing project and the extra pieces could go in my collection. Certainly
there would be a handful of random special pieces to buy separately but it would
be cool to have the option of buying a few complete sets to get the majority
of the parts.
Just a thought and the development cost would be minimal since the hard parts
(set part inventories & want lists) already exist.
|
|
| Author: | Tech_M | | Posted: | Nov 18, 2018 22:47 | | Subject: | Stud.io 2.0 Rendering: Full Color Background | | Viewed: | 48 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| I find it extremely irritating that the two options for the background while
rendering are: No background (renders as a png of only the MOC) and Floor (sets
the floor to a color, the background is black or white depending on light
type, has the bricks reflect the color of the floor as well) Why can't we
have an option that is like floor, but fills the entire background with the selected
color?
Yes, I understand that one could just lay the PNG from no background over a solid
color, HOWEVER, the thing about floor is that the reflected light color being
tinted towards the floor color is really nice, and makes the model seem to glow
the color of the floor.
Additionally, I find it annoying that while picking a color for the floor, there
is not a way to see what color the floor will actually end up looking like after
being lit unless you start rendering.
My suggestions are:
–Add an option for rendering that functions like floor, but fills the entire
background with selected color/
–Add option to see what color the floor/background will actually end up being
once lit, or add an option to lock the floor/background from changing color due
to lighting.
I think these are very much needed especially the first one, the renderer is
slightly dysfunctional without it in my opinion, and there isn't a way to
manually fix it perfectly. The best you can do is smart crop the color of background
out and then the entire image over a solid color that matches the floor. However
this doesn't work if the floor color or the model is too close to the color
black, and even then it really doesn't look that good.
I would very much appreciate it if these changes were made, and I think others
would as well.
|
|
| Author: | gregmgallup | | Posted: | Nov 12, 2018 21:25 | | Subject: | List only USA items in "Items for Sale" tab | | Viewed: | 102 times | | Topic: | Suggestions | | Status: | Already Exists | |
|
| When I want to buy something under the “Items for Sale” tab, all of the items
from all of the countries are listed.
It would be nice to see only USA sellers.
Under the “Price Guide” tab there is a way to change the settings to see only
USA prices.
Can that also be applied to “Items for Sale?
Thanks
Greg
|
|
| Author: | MidwestBrick | | Posted: | Nov 12, 2018 13:42 | | Subject: | Parting Out - Items We Do Not Have | | Viewed: | 157 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| I used Brickstock to Load my stock into the store but the Price Guide that BL
has is a wonderful estimate to what I would do using Brickstock.
However, a piece of the parting out could be pushed to one degree further if
only you were able to have the BL system tell you what the items are that you
do not have.
In the attachment, off of a random set, I have the majority of the lots in my
store, but do not stock 4 of them. This is where it would be wonderful to have
a quick way of knowing what those 4 Lots are. Is there a way this already exists?
The only want I know of to check on this is to run an upload from Brickstock
into BL, take it to the verify screen and review the items that are not being
consolidated. Is there another way that is helpful?
Thank you
|
|
|
| Author: | Gaston.La.Brick | | Posted: | Nov 11, 2018 14:15 | | Subject: | Mark a buyer as "Refunded due to non-arrival" | | Viewed: | 161 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| It happens a buyer says he didn't receive the items. When shipping using
an untracked medium, there is no way in verifying if the claim is legit. So I
usually make no fuss and either refund the total order amount (including shipping)
or re-send it (if I have the items in stock).
In these cases, I sometimes get the feeling the buyer might have done this before
and actually has received the items. But as I said: there is no proof, since
no tracking. Then I wonder: "has this buyer done this in the past before with
other sellers?". There is no way in knowing. And that's why I think a buyer
should get some sort of parameter/rating stating the number of orders that were
refunded due to non-arrival. It seems like a small feature. Not really that important,
but if it were there, it would give some extra statistics in the long run as
well.
|
|
| Author: | createat8 | | Posted: | Nov 7, 2018 03:47 | | Subject: | Open catalog item with color selected | | Viewed: | 61 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Hi all,
I'm not sure if this is requested before, but this is one of the things I
frequently ran into so I thought I'd post it here as a suggestion.
I know that a couple of years ago an improvement was made to Bricklink when adding
a part to your store inventory. If you have the part color selected in the catalog
screen, it would be prefilled in the "add to inventory" screen. I for one was
very happy with that . This also works when clicking a part in the inventory
of a set to go the the part's catalog page; It will be loaded with the color
pre-filled.
It would be great if this functionality was to be implemented in the folowing
cases as well:
1. Clicking from part in store to catalog. When browsing a store, you always
browse parts in a particular color. Clicking the part image in the store shows
a modal window with the part info and a link to the catalog. Clicking that link
will open the parts catalog page, but without a color selected. I use it often
to check how a part in a certain color is priced compared to other stores. Passing
on the color code to the catalog page would be an improvement
2. Somewhat similar is the following case:
Clicking the inventory of a minifig, e.g. C-3PO (https://www.bricklink.com/catalogItemInv.asp?M=sw365)
will give all parts that minifig consists of in their color.
- Clicking the inventory of the torso assembly (https://www.bricklink.com/catalogItemInv.asp?P=973pb1049c01),
will give all parts that torso assembly consists of, with colors for arms and
hands, but no color for the torso part.
I would expect that the torso part has a color as well, seeing that you've
"drilled down" from a specific part in a specific color to it sub-parts, so it
makes sense that the sub parts are displayed in that specific color as well.
Let me know what you all think of these cases and if you feel an improvement
can be made as well.
|
|
| Author: | bb458944 | | Posted: | Nov 1, 2018 09:22 | | Subject: | Part 3062old in projects AFOL | | Viewed: | 90 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Allow use of part 3062old in the projects for AFOL. It is prettier than the current
3062 and allows to make thinner columns more elegant.
|
|
| Author: | Lauren_Luke | | Posted: | Nov 1, 2018 00:14 | | Subject: | Seller Specific Catalog | 'My Category' Sort | | Viewed: | 68 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Goal: Develop a seller customisable category system for each sellers Inventory.
Each seller should be able to go to their Inventory Page [ https://www.bricklink.com/inventory.asp
] and see at the top of the page an extra sorting choice, called 'By My Category'
(?) (see image)
This will sort the Inventory into Sets | Parts | Minifigs | Books | Gear
etc and then into set categories entered by the seller.
This seller specific category is set in the Inventory Add Page [ https://www.bricklink.com/inventory_add.asp
] and the Inventory Detail Page [ https://www.bricklink.com/inventory_detail.asp
]. See images for visual idea.
The sellers store will categorise them using the BL catalog (as usual), only
the seller's view of his/her inventory can only be seen by the seller.
Rollout of this idea and then after new sellers would get the BL categories pre-populated
for their inventories. Any new catalog entries would be pre-populated for sellers'
category system to change at will. Any catalog changes (re-category particularly)
only change in the BL category system but the 'My Category' entry wil
come up in red for the seller (a bit like Storeroom settings).
The 'My Category' feature is lot specific so the seller could have one
part in one category and the same part (perhaps a different colour or condition,
or something else) in another category. For instance, the controversial Beehive...
* | | 35574 Cone 2 x 2 x 1 2/3 with Stacked Rings (Beehive / Cotton Candy)
Parts: Cone |
...could be categorised by the seller as 'Animal, Accessory' for Bright
Light Orange and categorised as 'Food' for the same part but in 'Bright
Pink'.
The 'My Category' entry should be sorted alphanumerically, so the seller
will have to take this into consideration, when setting up his/her system.
Also Bricklink could also monitor how sellers are setting up their category systems
and gain some insight into the best use system. This would complement using this
forum for category ideas and listening to only about a dozen sellers on the forum.
This would help sellers sort their BL inventory the same as their physical inventory
making order processing easier and faster.
A reset function should be provide (after warnings) so the seller can reset his
inventory category system to the same as Bricklinks.
When an order comes in, there should be a setting to see the 'My Category'
with each order entry, so the seller can easily pick the order items.
|
|
|
| Author: | Enlargee | | Posted: | Oct 29, 2018 04:52 | | Subject: | Search by multiple parts | | Viewed: | 55 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| This site is already awesome. I've been finding some old sets that I had
long forgotten about, just by finding a few unique parts in our 30+ year old
box of lego still at my parent's house.
I found a wedge shaped classic space part in the box, and from that I was able
to find that it only existed in a few sets. From there, I was able to find the
Sonar Transmitting Cruiser, something that I would have completely forgotten
about had it not been for the uniqueness of that part. I was in fact, able to
rebuild it despite all the pieces being scattered about in the old lego table
for 30 years, with numerous visiting and grandchildren messing around with it
for all this time - with only 2 substituted parts.
Tl;Dr
Anyhow, on to the ACTUAL suggestion
I would like to be able to do a multi part search. Ie if I have part 3xxx (colour
A), 5yyy (colour B) and ... 6zzz (colour X/Y/Z), which sets (if any) contain
all of those pieces? Even partial results would be particularly useful.
This could be implemented perhaps with a search limit of up to 5 peices at a
time, or more depending on an acceptable level of load on the server.
|
|
| Author: | romax1989 | | Posted: | Oct 27, 2018 00:02 | | Subject: | store carts | | Viewed: | 87 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| I was thinking that it would be an interesting feature if store owners were able
to see who has carts/how many carts people have in your store so that we might
be able to issue coupons or have sales to encourage people who have had an open
cart for a long time. Another idea is people get email notifications (if they
want to enable them) for stores they have carts in whenever the price drops.
|
|
| Author: | calsbricks | | Posted: | Oct 24, 2018 13:01 | | Subject: | Price guide improvement | | Viewed: | 217 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| We are aware that nothing is going on on the classic site whilst the development
team focus on Bricklink XP, so we will make this as short and sweet as we can.
Having contacted the forum and put all elements of this together it is plain
that a subtle but important change needs to be in place for the price guide screen.
Understanding full well what happens with the 'sold at' columns those
can be left as they are until the whole price guide is revisited, whenever that
is going to be. The current items for sale, however needs s small but important
change, in our view. It is currently not possible to determine the currency conversion
rate for those figures. It could have been anyti8me in the last hour or this
hour or whenever.
Please simply add the two fields which are used to convert e.g. for example $1
= 'x' £;s and £1 = 'x$). This will enable any member, buyer or seller,
to at least get their figures correct when working offline. This is not a complicated
change/fix - it merely requires placing those fields on that screen each time
they change. The fields are held somewhere in the system even if it is a temporary
table, so it should be relatively straight forward to display them on the price
guide screen.
Thoughts ?
|
|
| Author: | cosmicray | | Posted: | Oct 16, 2018 09:19 | | Subject: | Instant Checkout testing simulation | | Viewed: | 116 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Please implement a testing framework for Instant Checkout such that …
1. Any seller can determine a number of test cases to valudate their IC shipping
parameters.
2. Those test cases can each be expresed as a script (textual or GUI object based).
3. The seller can then select all, or a subset of the test cases.
4, The seller can then submit those test cases as a batch request.
5. The BL system will then schedule and run those test cases.
6. The seller will then receive an email back showing which test cases were run,
what shipping methods were allowed, etc. This would be roughly analgous to what
is reported via the shopping cart display.
7. This would not involve actually taking any items out of inventory, nor creating
any real orders, but would be a test case simulation of that.
8. The seller could retain those test cases for later reuse, as various parameters
are modified.
thank you, Nita Rae
|
|
|
| Author: | cosmicray | | Posted: | Oct 15, 2018 13:45 | | Subject: | Physical dimensions on Catalog pages | | Viewed: | 47 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Currently, for parts, the Catalog page only displays the logical dimensions of
the part (i.e. the stud counts + brick height).
Please add the physical dimensions. This exists, but is only seen under a lot
listing when custom values are enabled.
thank you, Nita Rae
|
|
| Author: | jimbo23uk | | Posted: | Oct 13, 2018 11:26 | | Subject: | Payment | | Viewed: | 91 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Isnt it time Bricklink was to offer other payment methods , we used to have our
church group on paypal then a couple of year back they said no ,you now have
to nominate a single person . if that person dies or goes on holiday or any other
reason our buying and selling comes to a stop (unless we use amazon ) we are
currently going through a situation where our account has been put on hold while
paypal investigate £1.01p the reason why i could go on and on,i just so happened
that we had placed 3 orders with brick link and a purchase with ebay , so the
question s how do you pay , one of the orders was paid via Pingit .its becoming
classed as restrictive practice will a government in one country take action
against this ,i can see it happening , so is it no paypal no bricklink !!!!!!!!!!!!!answers
on a toilet roll please
|
|
| Author: | WFMTF | | Posted: | Oct 11, 2018 08:05 | | Subject: | 3003 and 3003old | | Viewed: | 84 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| As far as I know none of the Trans- and Glittercolors have inside supports.
WHY do these colors appear as known colors on item 3003 and do not appear as
known colors on item 3003old - without inside supports.
This is a mismatch of catalog criterias - seen from my view.
I think that a short explanation in the additional notes would be good.
Thank you for a response
Waltraud
|
| Author: | bb1227754 | | Posted: | Oct 10, 2018 21:57 | | Subject: | Studio 2.0 | | Viewed: | 62 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| | Hinge tool additions |
| Author: | DoMT | | Posted: | Oct 6, 2018 12:26 | | Subject: | New Data Field for the cost/lb paid for stock | | Viewed: | 59 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| For sellers that buy their lego by weight a field in the settings where a seller
can enter cost per weight would be really useful.
If there was, then the cost per piece field could automatically be filled in
for the seller, instead of having to work it out manually each time. And the
cost of inventory would then be quickly reflected.
|
|
| Author: | EmblaRonja | | Posted: | Oct 5, 2018 17:19 | | Subject: | What about meeting the Buyers? | | Viewed: | 193 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| I thought about something...
It was great wheen BrickLink for about a year ago had some articles where we
could meet some sellers. Fun to read and great for any BrickLinker, I think specially
for sellers.
Coldn´t we have something just the same with some buyers? Invite them to participate
and show of their collection. What do you collect? Are you a builder or just
collecting? Any special finding to tell about? What do you seek now? Any goal
whit your project, collection?
Et c.
I been a collector my self and I often think it´s not so easy to share my passion
with ordinary friends, not that many of them understand Passion of Lego at all.
Maybe more people out there thinks the same?
I think this would be a very good byer friendly marketing thing that could increase
traffic and sales to the site.
God or bad idea?
|
|
| Author: | Tech_M | | Posted: | Oct 2, 2018 23:05 | | Subject: | Brickheadz Prints in Stud.io | | Viewed: | 50 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| I and some of my friends are a bit disappointed by the lack of prints from the
Brickheadz series, especially the eyes. Does anyone else want these added?
|
| Author: | bb1158246 | | Posted: | Oct 1, 2018 12:47 | | Subject: | Like feature | | Viewed: | 72 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| I'm sure someone has suggested this before, but since I can't find an
earlier post that suggests this, I'll just make a new one.
Why not add a 'like' feature to the forum? So many times I read a comment
that I like, but I don't feel like responding to the comment to show I agree.
A like button would add a level of convenience.
|
|
| Author: | Gaston.La.Brick | | Posted: | Oct 1, 2018 08:47 | | Subject: | 90-percentile as new average price ? | | Viewed: | 202 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| I noticed the highest prices of items sold (or of items that are on sale), have
an out of proportion influence on the average prices.
Example: when 9 people sell (or have sold) an item at €0.10 but 1 person has
sold that item for €10.00, the average price would be €1.09
You may say this example is not realistic, but it's not that unrealistic
either. Check out item 6558. The avg used price of last 6 month sales is €0.023,
while the majority of the sales are for less as €0.02
If you look more closesly, you see a few sales at a high price, but not a lot.
(Note: someone even sold a few of these for €1.00 !)
It's my suggestion to change the calculation of avg price to use the 90-percentile
method. So only the 90 percent (lowest prices) are taken into account. That way,
the top 10-percent highest prices are not taken into account when calculating
the avg price.
To avoid weird behaviours, the rule could be in place only when there are 10
items sold/for sale.
Example would become an avg price of €0.10
Another somewhat more complex method would be the use the median. Not the mathematic
average, but the middle price: 50% of the sellers have a lower price, 50% of
the sellers have a higher price.
What do you guys think?
|
|
| Author: | miskox | | Posted: | Oct 1, 2018 03:53 | | Subject: | Price offer | | Viewed: | 115 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Could an option (maybe this was suggested before?) be added that would allow
possible buyer to offer a price?
I would list an item with a price and a check box there would make this item
appear with a 'make an offer' options. Potential buyer would enter the
price he/she is willing to pay for an item. Seller receives this Quote and denies
or accepts this offer. If seller accepts it he then can add shipping quote and
send a quote (or something like that).
Saso
|
|
| Author: | randyipp | | Posted: | Sep 30, 2018 22:17 | | Subject: | Note to seller is not very good | | Viewed: | 295 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| I would love it if the "note to seller" when a buyer is checking out were handled
more like a message and show up in the messages inbox, with the notification
number. The note looks like a message when using "contact your buyer about this
order" link but can easily be missed by sellers. It has happened to me a few
times, and can be frustrating if you see it too late!
Thanks,
Randy
|
|
| Author: | BrickArchitect | | Posted: | Sep 28, 2018 17:43 | | Subject: | Order Item Removal Request notification | | Viewed: | 91 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| As a buyer on Bricklink
I sometimes have a seller requesting an "Order Item Removal Request"
on items the seller does not have in stock.
When the seller requests an "Order Item Removal Request"
can this request be sent to the buyers Bricklink Messages (presently it does
not).
This lack of notification from bricklink has caused many issues between buyers
and sellers
|
|
| Author: | bb1202806 | | Posted: | Sep 27, 2018 12:40 | | Subject: | Sorting prospective sellers by Favorites | | Viewed: | 65 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| After typing a part number in the search bar, the screen displays a list of all
the sellers based on the options entered there.
Is there any way to indicate that the list of sellers should only be from 'My
Favorite' stores? If there isn't any way to do this, then can I suggest
that this filter be added?
Besides being happy with specific Sellers and therefore wanting to use them again,
I've also found that when I'm trying to put together orders, the slightly
higher cost of the item is often offset by the savings on shipping by keeping
the order to a smaller number of sellers. I find that I'm often scrolling
through the list looking for those specific sellers that I want on this batch
of orders.
|
|
| Author: | tpr | | Posted: | Sep 24, 2018 06:17 | | Subject: | Stopping/Checking inflated prices | | Viewed: | 146 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Hi
Probably a lot of us have been guilty of this, adding an item to your inventory
and forgetting the decimal point, or putting it in the wrong place, thereby creating
an abnormal price.
Is it possible when entering a price for new or used, to flag if the price entered
is say more than xx% of the average prices already on file. Still giving you
the option to enter that price, but just warning that this price is abnormal
Thanks
Tracy
|
|
| Author: | figrindave | | Posted: | Sep 20, 2018 17:26 | | Subject: | Can we please have a "notes" column in Cart | | Viewed: | 71 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Would it be possible for us to be able to write down notes for all the different
carts we have? I usually have 8-15 carts going that I'm debating between,
and usually have to open each one to see what's there and why I haven't
bought it yet. For Instance: "This cart contains a rare minifig that won't
last long at that price, so buy this next."
Thanks!
|
|
| Author: | raycloud01 | | Posted: | Sep 20, 2018 07:09 | | Subject: | It is perfect if adding depth of field blur | | Viewed: | 106 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| I used studio to render a simple work，I found it is really nice result，
But I think if adding a popular effect： depth of field blur
Hope it will be created，even if need to pay it.
For now，I added a photoshop efffect on the result render picture， it seems awesome！
here is link in behance:https://www.behance.net/gallery/70440343/Lego-3d-render
|
|
|
| Author: | tons_of_bricks | | Posted: | Sep 17, 2018 07:22 | | Subject: | Promo Codes | | Viewed: | 90 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| We should be able to create promo codes for our store that buyers can use. Unlike
coupons, promo codes can be used by anyone with the code. For example, my store,
Tons of Bricks (GDM), has a Facebook page. I would like to give out a promo code
there for anyone who finds us through Facebook. However, I can't do that
since promo codes don't exist.
This would be an awesome addition to bricklink.
|
|
| Author: | CRAIGENDARROCH | | Posted: | Sep 13, 2018 03:24 | | Subject: | Tick Box | | Viewed: | 102 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| do you think it possible, that TICK BOX might be added to invoice to facilitate
easier checking of contents, may be it could be incorporated within the existing
colour code box
Robert
|
| Author: | JulieK | | Posted: | Sep 13, 2018 00:29 | | Subject: | Return the Catalog tab | | Viewed: | 122 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Please put it back.
It was the perfect word to describe where it took users.
|
| Author: | WoutR | | Posted: | Sep 12, 2018 16:43 | | Subject: | Replying to messages in the NEWS topic | | Viewed: | 76 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Every time we reply to a topic in the NEWS section of the forum, we get the error
message:
"Oops! There was a problem processing your request:
1. Topic was not selected."
Please make it possible to reply to the NEWS section without this error.
Possible solutions include:
- allow replies in the NEWS section,
- select one topic by default (instead of asking users to pick one at random,
usually Announce and/or Administrative are used)
|
|
| Author: | WILYKAT | | Posted: | Sep 11, 2018 23:46 | | Subject: | add a missing zero? | | Viewed: | 128 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| See attachment. I used wanted list auto finder and came up with 2 stores that
has everything on my one wanted list. But $5.2 just looks awful, it should read
$5.20 I guess if the last digit is a zero, it got left out? Not sure how to
fix this to show correct 2 digits cent amount for US dollars (and I bet most
currencies) by forcing the zero to show up if it is a zero.
|
|
|
| Author: | kdx | | Posted: | Sep 11, 2018 11:16 | | Subject: | Request official BrickLink app | | Viewed: | 149 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Hi ,
I use my phone alot and I also use Bricklink alot , but the site on phone isn't
that great , so please. Bricklink create a phone app of Bricklink , it would
be easier for phone users.
I hope the staff will see this and an official bricklink app will be created.
Thanks for reading
|
| Author: | emiel.roumen | | Posted: | Sep 8, 2018 04:39 | | Subject: | Mobile website or app | | Viewed: | 97 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Can the style sheet of the webpages be modified to allow for better usability
on mobile devices/phones?
|
| Author: | brisbane_qld | | Posted: | Sep 6, 2018 07:50 | | Subject: | LBG & DBG abbreviations in searches | | Viewed: | 95 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Light Bluish Gray and Dark Bluish Gray are very common colours, and LBG and DBG
are common abbreviations for these colours. Could you please consider recognising
LBG and DBG as abbreviations for these colours in searches?
|
|
| Author: | StoreToys4Boys | | Posted: | Sep 3, 2018 12:31 | | Subject: | Request for addition in checkout process | | Viewed: | 98 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Request for addition in checkout process and terms of store at beginning of purchase.
Hello Admins of BrickLink.
I would like to request an addition in the checkout process that will simplify
the way I handle my lot limitation versus $.
I’m sure some sellers would like to add there comment to my request but could
I ask them to restraint themselves to make it official that I’m doing a request
to the admin but I need to receive an answer that will be available to everybody.
I received another order that do not comply with my store terms and I don’t like
to cancel orders since almost all this orders are from new users with 0 feedback
.
I think everybody here sometimes received orders like 100 lots for $20 or more.
The way my storage is done, I can say that a 100 lots orders will take me around
100 minutes to fill, pack, print. Even if I run for it, I can maybe done it in
50 minutes.
From a first time user, this is not funny to spend an hour or two and get cancel
at the end because the order done did not respect store terms.
The concept of limitations in orders are widely spread. Even Lego website for
parts have limitations.
I like to suggest a simple way to fix my problem and this will be a great way
for everyone to fix their goal. This is an addition needed but this would not
affect other factors if you want to keep them.
At checkout, can you add a factor of division versus amount in $.
Ex: I would like my store to accept orders with maximum 20 lots for $25
In other terms, I can take orders that will go over 125% of lots versus dollars.
To make it easier to understand we could also go with % calculation.
A 1% factor will be an order of 20 lots for a purchase of $.20 minimum purchase
A 10% factor will be an order of 20 lots for a purchase of $2 minimum purchase
A 50% factor will be an order of 20 lots for a purchase of $10 minimum purchase
A 100% factor will be an order of 20 lots for a purchase of $20 minimum purchase
A 125% factor will be an order of 20 lots for a purchase of $25 minimum purchase
So at checkout every order will be calculate by the factor we want. If you don’t
want any limitation on the number of lot just leave it by default to 1%.
That’s easy to control and the buyer will get a message with short explanation
of the limit concept for that store in the beginning of their purchase. I think
it’s a much better way to define every need of different sellers and nothing
is lost or gain for sellers who don’t care about lot limitations.
That will be a great way for buyers to be inform right away and not having deception
at the end of their orders.
If you accept, I will be now removing the $20 minimum purchase in my store and
removing all the bulk minimum that break my head all the time.
Please Admins,can you come up with an detail answer of your views on this .
I would like to thank you for your time and keep on doing the great work.
Toys4boys
|
|
| Author: | JulieK | | Posted: | Sep 2, 2018 13:00 | | Subject: | Make Special Assemblies easier to find pt 2 | | Viewed: | 74 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Suggestion is to give Special Assemblies their own section of
the catalog.
Right now they can be found by going to the parts section.
Giving them their own section would make them stand out. I didn't even know
they existed until the recent forum discussion.
Make the corresponding drop down menu match to the theme the assembly comes from?
|
|
| Author: | JulieK | | Posted: | Sep 2, 2018 13:00 | | Subject: | Make Special Assemblies easier to find pt 1 | | Viewed: | 84 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Suggestion is to add Special Assemblies to the "Items Appears In" section of
the catalog
|
|
|
| Author: | Teup | | Posted: | Aug 30, 2018 08:55 | | Subject: | New parameter for lots: max per buyer | | Viewed: | 316 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| I would really like to see a new parameter for lots that limits the amount a
buyer can buy of a certain part in any one order. The part would then turn up
in search results and in store inventory showing not more than the value specified.
It's something that many online stores use, notably also LEGO themselves.
So far the way to do this is to offer the desired max amount, put in remarks
how much is left, and put the item on retain. This has several drawbacks, most
of all:
- You have to manually reoffer and modify the remarks all the time
- You cannot see or accurately modify the price and other stats of your inventory
because part of the amount of what you have is hidden in remarks
This could all be solved by 1 simple extra field, that is left on 0 when unused.
Of course, the item should not appear updated for users that still have an order
that has not yet reached the packed status. Of course buyers can buy again after
that, but separate shipping and handling fees should be sufficient to bar the
effect of buyers blowing sudden holes in your inventory.
|
|
| Author: | bje | | Posted: | Aug 29, 2018 05:00 | | Subject: | Minimum re-order level and auto wantlist | | Viewed: | 84 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Can we please get a field in the my inventory page for a minimum stock level
for each item and can that please be used to trigger an automatic entry to a
dedicated wantlist as soon as the re-order level is hit?
So for example what I would want is say in red, I would like a minimum
inventory to be in my store of 30. I have 60 at present. An order comes through
for 40, and immediately that part in that colour gets added to my dedicated
wantlist for inventory.
The benefit would be that it is simply a wantlist that needs to be checked daily
and not inventory levels in brickstock or some other off-site inventory management
system. Also obviously easier to re-order as needed, especially for sellers like
me with very long lead-times.
Of course, the best would be if there could be a complete inventory management
on BL as to which this would just a small part of because I really find it frustrating
that inventory management on-site is essentially just the selling price and quantity
available, but... baby steps
|
|
| Author: | MidwestBrick | | Posted: | Aug 28, 2018 14:14 | | Subject: | Ability to Sort Inventory by Total Size | | Viewed: | 68 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| One of the many ways that I personally change my pricing is simply based on how
much space those items take up to store them. An example is, I believe I have
about 200 6x6 plates. This takes up a good amount of room to hold these, of
which, maybe I would want to price these lower to possibly move them to free
up space. Another example is large Wheels. Regardless, it would be beneficial;
to other than knowing what items are large but also to know how much space is
being used in comparison to others if they were able to sort by total Size which
would be Quantity times the sizes that BL already has established. This would
help compare space being used for 2 x 4 plates vs 6 x6 plates vs 1x1 round plates
and also be another way to run sales on items that are large that maybe we forgot
we even had.
Thanks for the consideration.
|
|
| Author: | littlejomo | | Posted: | Aug 28, 2018 05:38 | | Subject: | Add Order Numbers on PayPal | | Viewed: | 87 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| It would be a great help when tracking payments if the Bricklink Order Number
could be added to the PayPal payment.
When an order is paid for via the onsite checkout, the payment has a Purchase
Description of 'Bricklink Order', but adding the Order Number onto this
too would be a great help.
Thank you,
John
|
|
|
| Author: | bb1158246 | | Posted: | Aug 20, 2018 19:32 | | Subject: | Uploading minifigs made easier | | Viewed: | 156 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| I don't know if there have been suggestions on this before, but I couldn't
help wondering if there's a way to implement this suggestion.
In uploading Legos to my store that's opening soon (hopefully!!  ), I see
that there are two ways to upload minifigs. Either, you can find complete minifigs
and upload your minifig as such (such as Dr. Charles Lightning in Adventurers),
or you can upload each individual piece (such as Left Robot Arm).
I'm uploading Legos that I bought from an ebay bulk lot, so all the minifigures
are just randomly put together. So somehow, I'm supposed to find out if any
of my minifig parts can make up an actual minifigure that belongs in a category,
or if I have to individually upload each piece.
That probably sounds confusing, so let me put it another way. Say, for example,
that I have 3 pairs of red, blue, and green pants. I also have 3 pairs of red,
green, and blue shirts. I have 5 different faces, and 3 different hats. If you're
an expert at knowing what kind of minifigs there are out there (which I am completely
and totally ignorant about), you'll probably be able to tell if there are
any combinations of the minifig parts that I have that make up an actual minifigure
that is in a category. But I have no idea about these things. Yes, if I didn't
want to spend hours looking in each category to see if there are any minifigures
that I could create using my pieces, I could just upload each individual piece.
But here's where the suggestion comes in: When you're uploading different
minifig parts, Bricklink looks for a match. So, say you upload a used green pair
of pants, a used shirt with suspenders and a tie, a used white-bearded face,
and a used explorer's hat all separately. Bricklink knows that Dr. Charles
Lightning is made up of these parts. So something pops up saying something like,
"These pieces make up Dr. Charles Lightning. Do you want to turn these individual
pieces into a complete minifigure, or leave them as individual pieces?"
And then you can decide whether or not to leave them as separate pieces.
Now, this is probably wayyy too complicated, and can't be done without a
lot of hard work, and the Bricklink staff already put a lot of work into this.
But if not, and this is possible and easy to do...what do you think? Would this
be a useful addition? Is there already something like this? Or am I just being
stupid, and no one else would find this helpful?
Sorry for such a long post!
C.
|
|
| Author: | C0lsanders_ | | Posted: | Aug 20, 2018 08:20 | | Subject: | Page options within inventory | | Viewed: | 52 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Another suggestion, although this may be moot with some of whatever BL has come
up with for the upcoming sellers' update, whenever that is going to be.
My suggestion is to have all (if possible) of a given item category's pages
choosable, at the top and bottom of the page. Right now, it displays 1-10. Personally,
I have a category (plates) with 16 pages, and I find it more than just a little
annoying to have to select page 10, just to go to pages 11-16. And when on, say,
15, 1-4 are now not an option.
That page is quite wide enough you could simply put all 1-16 on there, without
the slightest issue. Probably even 1-30, before you hit the edge of the used
page.
Another option could be to have a "jump to the end" button (in my case, would
jump to 16) and one to jump back to page 1 as well.
Also, a different suggestion, but related, add a "Submit changes" to the top
of the page as well. It seems stupid (to me) to have to scroll to the bottom
of the page, just to submit whatever changes I made to the top item on that page.
Miles (C0lsanders_)
|
|
| Author: | Shintaku | | Posted: | Aug 20, 2018 06:38 | | Subject: | Who akes OCR cannot leave feedback | | Viewed: | 181 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Hello,
as a seller I always have this problem:
buyer submits a rash order then wants to cancel.
If you do agree, you risk the buyer leaving a negative feedback. I would surely
leave a neutral or negative for someone asking to cancel an order just because
they don't want the items anymore. But I can't leave it, as a revenge
negative is always ready.
So I deny the order cancel until they become NPB, I undergo the NPB procedure,
so the buyer isn't allowed to leave a feedback anymore.
But this way my items are BLOCKED FOR 14 DAYS (7 I have to wait + 7 I have to
wait the NPB to resolve) and no one can buy them anymore.
Instead if I was able to accept the OCR, knowing they will not be able to leave
a negative, I would do that, leave a neutral, relist my items instatly and move
on.
I don't think that removing the chance to leave a feedback if we wish to
cancel the order is so unfair. The ones who wish to cease the order, ceases the
feedback with it.
Please help us sellers.
Thanks
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
USA, Wisconsin
Belgium
Netherlands, Overijssel
Spain, Navarra
Australia, Queensland
)
)
)
United Kingdom, England
Denmark
Austria, Burgenland
Sweden, Västra Götaland
Slovenia
Canada, British Columbia
Singapore
South Africa, Western Cape
Italy, Lombardia