Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | Biglesdug | Posted: | Oct 17, 2018 12:48 | Subject: | Clone Turbo Tank Instructions version 7261-1 | Viewed: | 68 times | Topic: | Inventories | Status: | Open | |
|
| I pieced together a clone turbo tank from a lot I bought. I gathered the parts
for the version 7261-1 with the Light up Mace Windu. Now I am trying to build
the set from instructions online and they all have the parts for the non-light
up version (at least from the parts list on here). The instructions even show
the light-up fig but have the parts for the non-light up one.
I am not home so I don't have access to the other parts to switch it over
and I also have the light up fig not the non-light up figure so I would like
to build it for 7261-1.
Can anyone direct me to the instructions or how to use
in place of these?
I'm confused and any help would be appreciated .
|
|
Author: | Skylar2010 | Posted: | Oct 13, 2018 21:31 | Subject: | set 41068 | Viewed: | 71 times | Topic: | Inventories | Status: | Open | |
|
| Hi I've been trying to inventory set 41068 a frozen disney princess lego
set. However, there are several parts that seem to belong to the set that have
stickers I could only find as custom parts not regular parts. But is that correct?
If so how do you select those items to put in your inventory?
|
Author: | igor79 | Posted: | Oct 11, 2018 03:40 | Subject: | 75222 | Viewed: | 79 times | Topic: | Inventories | Status: | Open | |
|
| hi, why 75222 dont have inventory list? |
Author: | StormChaser | Posted: | Oct 3, 2018 11:49 | Subject: | Need Work | Viewed: | 230 times | Topic: | Inventories | Status: | Open | |
|
| We inventory administrators have used up all the work. There are no inventories
or inventory change requests pending approval. I can't speak for Marek,
but I feel rather useless with nothing to do.
There are still 410 sets which haven't been inventoried, including 68 sets
from this year. Send us some work!
|
|
Author: | samsam2 | Posted: | Oct 1, 2018 23:16 | Subject: | Technic Rack Winder 2426 or seperate pieces | Viewed: | 54 times | Topic: | Inventories | Status: | Open | |
|
| Did this part need to be assembled in original sets?
[p=2426]
This assembly is only in counterparts of set inventories, and (very annoying
to many) its high cost parts are in set inventories instead.
I've never seen this part separated and I would be very surprised if it didn't
originally come assembled.
|
Author: | axaday | Posted: | Oct 1, 2018 17:26 | Subject: | TimeCruisers Testflug Cassette | Viewed: | 78 times | Topic: | Inventories | Status: | Open | |
|
| I just opened up and inside I found a I have no idea
what it is. Should it be in the inventory?
|
|
Author: | bb393434 | Posted: | Sep 26, 2018 16:15 | Subject: | 2853 Technic Crankshaft | Viewed: | 97 times | Topic: | Inventories | Status: | Open | |
|
| Not to sound like Jerry Seinfeld, but "what's the deal" with this part in
this color? Is it Yellow or Bright Light Orange? Every single set that we have
pulled this part out of has been BLO despite the fact that the BL cat identifies
it as Yellow. We have seen yellow examples from older models, this new part coming
out of 2014+ era sets is not the same shade. And yet there is no counterpart
(nor should there be, 100% of the sets are showing BLO). Out of over 128 pieces
we have obtained from MISB sets, not a single one is proper Yellow. This seems
to be a problem, as every time we inventory a set, we have to address this discrepancy.
|
|
Author: | stephannie | Posted: | Sep 24, 2018 09:57 | Subject: | Inventory Change Request for Set 1371-1 | Viewed: | 34 times | Topic: | Inventories | Status: | Open | |
|
| hello to all ! i am currently building the 1371 set and, according to the official
instruction, 6 Black Brick, Modified 1 x 1 with Headlight ref 4070 are needed
(1 page 10, 1 page 11, 1 page 12, 1 page 14 and 2 page 16. But the BL parts inventory
says we need 5 to build the set. It's not enough. Can we change this ? have
a good day !
stephannie
france
|
|
Author: | mophead | Posted: | Sep 22, 2018 19:18 | Subject: | set 7676 | Viewed: | 86 times | Topic: | Inventories | Status: | Open | |
|
| Am I to believe set #7676 (as shown in sets and their parts info) that part #4515
listed as only 4 pieces in set. Yet by all indications there are six stickers?
peeron also lists only four pieces in set. I know you cannot apply sticker to
both sides of that piece. Anybody know what I am dealing with here? trying to
put it together...not sure how many of 4515 I really need.
Thanks
|
|
Author: | David892 | Posted: | Sep 22, 2018 14:17 | Subject: | Alternate Version of set 6386? :O | Viewed: | 100 times | Topic: | Inventories | Status: | Open | |
|
| Good afternoon all,
I was rebuilding my 6386 (Police Command Station) set yesterday and to make sure
I had all the pieces I consulted the inventory. While building the model, I realised
that the inventory was not accurate and started double checking everything once
again. To my surprise, I had all the pieces listed on Bricklink but I just couldn't
complete the helicopter.
So I spent another hour trying to figure this out and I finally found out
that my instructions were different!. For the same set, my instructions were
telling me to use different pieces.
Please see image attached.
My question to ou guys is how can we document this? And is this something that
you guys see all the time with older LEGO sets?
Thanks a lot!
|
|
|
Author: | WFMTF | Posted: | Sep 15, 2018 09:07 | Subject: | 3003 and 3003old | Viewed: | 84 times | Topic: | Inventories | Status: | Open | |
|
| As far as I know none of the Trans- and Glittercolors have inside supports.
WHY do these colors appear as known colors on item 3003 and do not appear as
none colors on item 3003old - without inside supports.
This is a mismatch of catalog criterias - seen from my view.
I think that a short explanation in the additional notes would be good.
Thank you for a response
Waltraud
|
Author: | odurt | Posted: | Sep 9, 2018 12:17 | Subject: | Note to be added for minifigre ac009 | Viewed: | 65 times | Topic: | Inventories | Status: | Open | |
|
| Hi,
For the following minifigure, I have a 'c' style head.
Can you please add this note:
This minifigure has been found with both the 'b' and 'c' style
head.
as per
Thanks,
Sebastien
|
Author: | Poppie123 | Posted: | Sep 8, 2018 12:24 | Subject: | SET 10765 | Viewed: | 88 times | Topic: | Inventories | Status: | Open | |
|
| Hi There, Please can someone assist to auto part-out set 10765? Its not yet
available for part-out on Bricklink.
|
|
Author: | StormChaser | Posted: | Sep 3, 2018 17:15 | Subject: | Sources for Set Inventories | Viewed: | 77 times | Topic: | Inventories | Status: | Open | |
|
| Since around February of this year we have been informally requiring that all
new inventories (meaning recent sets) be submitted from sealed set contents.
We believe this rule greatly reduces the error rate in inventories. If someone
has a brand new set in hand, then parts, part colors, part variants, and extras
can be more accurately determined.
The only concern was that the requirement would result in a reduction in inventories
being added. Fortunately, this has not occurred. There have been 580 sets released
so far this year and only 73 of those sets don't have inventories on BrickLink
(about 12.5%). We can always do better, but 87.5% of 2018 sets inventoried is
still pretty decent (especially considering what an improvement this is from
the past).
Therefore, we have decided to make this requirement a permanent rule for new
sets going forward. The way it works is this: if the set has been in the BrickLink
catalog less than one year, then the only source accepted for its inventory is
a sealed set. After that, any source is acceptable. You can see the new rule
here under the heading Source:
https://www.bricklink.com/help.asp?helpID=199
The only problem with this rule are sets like this:
We may consider listing these sets as exceptions to the rule, but for now they
are covered.
|
|
Author: | StoreToys4Boys | Posted: | Sep 1, 2018 14:37 | Subject: | Inventory Pending Approval (?) | Viewed: | 96 times | Topic: | Inventories | Status: | Open | |
|
| Can anybody can clarify why it take soo long for the inventory of a set to be
approve.
For doing sales,we need this inventory to be approve quickly.
Ex:75203 is been out for a month and other site have all inventory done.
I think with the sales amount that past here,we should expect a little bit of
service.
We are paying 3% on every sales and i think we should received a minimum of service.
Please don't reply its a voluntary work that user are doing the inventory.It
should not be voluntary first of all.This site is doing money.With the number
of set that coming out every month ,i think somebody should be payed and doing
this full time.
I just resign myself to spend a hour to enter and verify that set with brickstock.
|
|
Author: | TyresOFlaherty | Posted: | Aug 30, 2018 15:22 | Subject: | Inventory for comcon057-1 | Viewed: | 75 times | Topic: | Inventories | Status: | Open | |
|
| I have this set and wondered if I could help add inventory (and minifigs and
the "alternate" minifig"). Can someone point me in the right direction? I'm
quite good with graphics and would be more than happy to take clean photos of
the new elements/prints in this set.
Thanks!
|
Author: | nectara | Posted: | Aug 24, 2018 07:36 | Subject: | 75203-1 | Viewed: | 75 times | Topic: | Inventories | Status: | Open | |
|
| Hi
What's going on with 75203?
More than one month still ,,Inventory In Progress,,
Regards
Nectara
|
Author: | CCBricks | Posted: | Aug 21, 2018 21:44 | Subject: | Parts for Gear #853191 | Viewed: | 56 times | Topic: | Inventories | Status: | Open | |
|
| Evening All...
I cam across a particular head piece that is associated with Jack Sparrow that
is only in this item:
It shows no inventories for the figures. Are the figures glued together, or
is it just the brick bases? I might have the other parts for this particular
version of Sparrow, but I'd have to check my "odd ball" bin lol.
Brian
|
|
Author: | tmxbricks | Posted: | Aug 21, 2018 06:46 | Subject: | Stickerd Parts no longer CPs? | Viewed: | 94 times | Topic: | Inventories | Status: | Open | |
|
| Are stickered parts no longer being listed as counter parts in Bricklink inventories?
I was verifying some set inventories and noticed all the following sets have
no stickered parts as CPs:
41322
41323
41327
41328
41329
For my own purposes, I have put stickered parts in the comments section of Brickstock
as I verify my inventories, but I liked having them listed as CPs.
|
|
Author: | WhiteVanMan | Posted: | Aug 20, 2018 08:20 | Subject: | Supplying a set's inventory | Viewed: | 99 times | Topic: | Inventories | Status: | Open | |
|
| Hi all.
I've got 2 copies of a Duplo set that has not been inventoried.
I've tried to submit the inventory, and I apparently need to supply information
about a few parts that are not within the catalogue, but there IS information
about the parts as BrickLink is getting the data direct from LEGO
What do I need to do?
It's mostly the printed parts that I'm having issues with.
Please help as I can't sell the parts as the set isn't inventoried
regards,
Paul
|
|
Author: | dredabeast24 | Posted: | Aug 18, 2018 22:57 | Subject: | Set invintories | Viewed: | 52 times | Topic: | Inventories | Status: | Open | |
|
| I am currently working on making custom starfighters and I was going to use set
75214 as a basis for the parts but it isn't inventoried. After a little bit
of digging, I found this list, https://www.bricklink.com/catalogList.asp?invRes=Y
There are still minifigs from the spring wave. There is no other way to get the
inventory that goes directly to the wanted list. Any tips to get it up fast without
copying the instructions?
|
|
Author: | SteveDJ | Posted: | Aug 17, 2018 12:57 | Subject: | Just how many pieces ARE in LEGO 10214? | Viewed: | 141 times | Topic: | Inventories | Status: | Open | |
|
| I was Googling for some pictures of the LEGO Tower Bridge, set 10214. What I
find interesting, is that there are two different versions of the set BOX --
with one version showing 4287 pieces, and another version showing 4295 pieces.
The catalog entry here shows 4287. Yet, there is no supplemental information
as to what happened?
If anything, the box art WITHOUT the tree in the corner, but instead showing
the Expert label/icon, looks like the more recent box. And it is the one showing
4295 pieces.
Is the catalog entry here not up to date?
|
|
Author: | normann1974 | Posted: | Aug 17, 2018 12:36 | Subject: | Error creating inventory change request | Viewed: | 36 times | Topic: | Inventories | Status: | Open | |
|
| I've tried creating the inventory change request shown in the attached image.
Can anyone tell me what's wrong? The system rejects my form by saying that
there's a problem with entry 4 ("Entry #4: New Match ID is same as Existing
Match ID."). But the item has no match ID yet, and the match ID I entered is
not in use yet. Is it because extras can't have match IDs?
/Jan
|
|
Author: | SteinchendeaIer | Posted: | Aug 16, 2018 01:34 | Subject: | Inventory Request 41456 | Viewed: | 30 times | Topic: | Inventories | Status: | Open | |
|
| Hello everybody, the inventory is missing for the Unikitty Set 41456. Could this
be created please?
|
Author: | Henk61 | Posted: | Aug 5, 2018 01:49 | Subject: | Request update inventory on set 70567 | Viewed: | 44 times | Topic: | Inventories | Status: | Open | |
|
| Hi,
Is it possible that the inventory of the set 70567 can be completed?
On 5 minifigs I am unable to see the parts because the "item consists of" is
not available.
The "Torso" of the following minifigs can not be found:
- NJO434
- NJO435
- NJO436
- NJO437
- NJO441
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|