Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | rbritton31  | | Posted: | Jan 14, 2021 09:21 | | Subject: | Is it possible | | Viewed: | 173 times | | Topic: | Inventories | | Status: | Open | |
| Is it possible to part out sets to your stockroom and when you take the parts
out of stockroom have them combine to parts you already have listed without making
2 listings for parts you already have. I want to do the computer work first before
I do the physical work but not if is going to give me for example listings for
2 sets of black technic pins, blue technic axle pins, etc.
|
 |
| Author: | Ninepartsred | | Posted: | Jan 14, 2021 07:57 | | Subject: | Re: 30kg Bulk buy of 90's Lego - what to do | | Viewed: | 36 times | | Topic: | Inventories | |
| In Inventories, Bromwich writes:
| | Hi everyone,
This is my first post on here, so apologies if I get the format wrong.
I recently won a large lot of loose Lego at auction, (for too much money), and
have been working my way sorting through it all.
What hooked me was that it came with 30+ instruction sheets, all from the late
80's and early 90's, plus the box for 6542 Launch and Load and 6286 Pirate
Schooner.
Having now spent a couple of surprisingly enjoyable weeks cleaning and picking
out bits, I have 21 near complete sets (minus any Minifigures), but also normally
missing a couple of special pieces.
My question is - What should I do with it now?!
should I (A) looking to buy all of the missing parts (currently 215, inc. minifigs
across 21 sets) to complete the set and sell as 100% complete.
Overall it seems that I need to spend 25-35% of the set selling price to complete.
Or (B) part out and save myself the time of buying the parts to sell them on?
Part of me feels that it would be nice to complete them, but it will also take
a lot longer to get things up and running.
Note - given their age there are also a fair few discoloured parts which I would
want to de-yellow before selling.
All lot of the left over basic part will just join my son's collection.
Any advice would be great.
Thanks,
P.S. Not sure what happened to the photos flipping!
|
I'm currently putting together some sets which need a few parts to complete.
Going by the instructions, you have a few nice ones.
You've obviously already checked the prices and weighed up your profit margin
but are those percentages of your intial cost or the selling price?
It's also worth checking how often the sets sell. In my case, that's
just in the UK for now.
Consider whether you want to sell them quickly or if you're happy to sit
on them for longer to get a better price. If you check your sets that other sellers
have in their stores, you can see when they listed them. Ebay, Gumtree, Facebook,
etc. is better for a quick sale but normally at a lower price.
I know some sellers use Ebay for complete sets and their BL store for parts.
I do when the selling fees are £1.
For example, one of my sets has only sold once on here in the UK in the last
6 months but I've seen it go several times on Ebay for what I consider good
prices.
I've freshened-up some yellowed parts, but as many people will tell you,
they discolour again and sometimes quickly, so I won't sell them. Also, even
though older sets/parts would be expected to show signs of wear, everyone has
a different idea of what's acceptable.
That's just my way of thinking but I hope it's of some help.
|
|
| Author: | peregrinator | | Posted: | Jan 14, 2021 07:45 | | Subject: | Re: 30kg Bulk buy of 90's Lego - what to do | | Viewed: | 36 times | | Topic: | Inventories | |
| In Inventories, Bromwich writes:
| | Hi everyone,
This is my first post on here, so apologies if I get the format wrong.
I recently won a large lot of loose Lego at auction, (for too much money), and
have been working my way sorting through it all.
What hooked me was that it came with 30+ instruction sheets, all from the late
80's and early 90's, plus the box for 6542 Launch and Load and 6286 Pirate
Schooner.
Having now spent a couple of surprisingly enjoyable weeks cleaning and picking
out bits, I have 21 near complete sets (minus any Minifigures), but also normally
missing a couple of special pieces.
My question is - What should I do with it now?!
should I (A) looking to buy all of the missing parts (currently 215, inc. minifigs
across 21 sets) to complete the set and sell as 100% complete.
Overall it seems that I need to spend 25-35% of the set selling price to complete.
Or (B) part out and save myself the time of buying the parts to sell them on?
Part of me feels that it would be nice to complete them, but it will also take
a lot longer to get things up and running.
Note - given their age there are also a fair few discoloured parts which I would
want to de-yellow before selling.
All lot of the left over basic part will just join my son's collection.
Any advice would be great.
Thanks,
P.S. Not sure what happened to the photos flipping!
|
25-35% seems a bit high to me. I don't have a good rule of thumb because
I hardly sell any sets, but it just seems high. Are there any sets where the
cost needed to complete is a bit lower than that? Maybe focus on completing those
together with the sets for which you have boxes.
|
|
| Author: | Bromwich | | Posted: | Jan 14, 2021 07:01 | | Subject: | 30kg Bulk buy of 90's Lego - what to do | | Viewed: | 150 times | | Topic: | Inventories | | Status: | Open | |
| Hi everyone,
This is my first post on here, so apologies if I get the format wrong.
I recently won a large lot of loose Lego at auction, (for too much money), and
have been working my way sorting through it all.
What hooked me was that it came with 30+ instruction sheets, all from the late
80's and early 90's, plus the box for 6542 Launch and Load and 6286 Pirate
Schooner.
Having now spent a couple of surprisingly enjoyable weeks cleaning and picking
out bits, I have 21 near complete sets (minus any Minifigures), but also normally
missing a couple of special pieces.
My question is - What should I do with it now?!
should I (A) looking to buy all of the missing parts (currently 215, inc. minifigs
across 21 sets) to complete the set and sell as 100% complete.
Overall it seems that I need to spend 25-35% of the set selling price to complete.
Or (B) part out and save myself the time of buying the parts to sell them on?
Part of me feels that it would be nice to complete them, but it will also take
a lot longer to get things up and running.
Note - given their age there are also a fair few discoloured parts which I would
want to de-yellow before selling.
All lot of the left over basic part will just join my son's collection.
Any advice would be great.
Thanks,
P.S. Not sure what happened to the photos flipping!
|
|
|
| Author: | peregrinator | | Posted: | Jan 13, 2021 19:37 | | Subject: | Re: Mixture of old and new dark (bluish) grey | | Viewed: | 18 times | | Topic: | Inventories | |
| In Inventories, popsicle writes:
| | I'll add: assuming the logic holds true for both dark and light grays. Which
it should.
|
Hmmmm, not necessarily -- light grey and light bluish grey are considerably
more difficult to tell apart than dark grey and dark bluish grey
|
| Author: | Chee_ching | | Posted: | Jan 13, 2021 17:24 | | Subject: | 51515 ready for approval | | Viewed: | 65 times | | Topic: | Inventories | | Status: | Open | |
| Dear Team,
I have completed the inventory compilation for set 51515. Please review and provide
approval.
|
|
| Author: | popsicle | | Posted: | Jan 13, 2021 17:01 | | Subject: | Re: Mixture of old and new dark (bluish) grey | | Viewed: | 29 times | | Topic: | Inventories | |
| In Inventories, popsicle writes:
| | In Inventories, iprice writes:
| | I've just pulled apart a set (#4495 - Star Wars AT-TE Mini) that I purchased
my self, many years ago, which has been in sealed storage in my loft pretty much
since I first assembled it.
I noticed that several parts were old dark grey while the majority were dark
bluish grey.
I checked the inventory and found that all parts should have been dark bluish
grey. There was no mention of old dark grey parts.
These parts (2* 1x4 plate and 6* Hinge Plate 1 x 2 Locking with 1 Finger On Top)
are definitely old dark grey. They are not sun damaged or faded; they are full
and evenly coloured top, bottom and sides. Also no other colour parts are affected.
So
1) Is this unusual?
2) Can the Inventory reflect that this set may have old dark grey alternative
parts.
|
There were a few sets from those crossover years that were reported to contain
a mixture of both grays. Most notably for me, is the beautiful
I don't know about the inventory, but certainly the listing notes can and
in fact, do reflect such info
|
I'll add: assuming the logic holds true for both dark and light grays. Which
it should.
|
|
| Author: | popsicle | | Posted: | Jan 13, 2021 16:56 | | Subject: | Re: Mixture of old and new dark (bluish) grey | | Viewed: | 38 times | | Topic: | Inventories | |
| In Inventories, iprice writes:
| | I've just pulled apart a set (#4495 - Star Wars AT-TE Mini) that I purchased
my self, many years ago, which has been in sealed storage in my loft pretty much
since I first assembled it.
I noticed that several parts were old dark grey while the majority were dark
bluish grey.
I checked the inventory and found that all parts should have been dark bluish
grey. There was no mention of old dark grey parts.
These parts (2* 1x4 plate and 6* Hinge Plate 1 x 2 Locking with 1 Finger On Top)
are definitely old dark grey. They are not sun damaged or faded; they are full
and evenly coloured top, bottom and sides. Also no other colour parts are affected.
So
1) Is this unusual?
2) Can the Inventory reflect that this set may have old dark grey alternative
parts.
|
There were a few sets from those crossover years that were reported to contain
a mixture of both grays. Most notably for me, is the beautiful
I don't know about the inventory, but certainly the listing notes can and
in fact, do reflect such info
|
|
| Author: | GreatBuy | | Posted: | Jan 13, 2021 12:38 | | Subject: | Re: Mixture of old and new dark (bluish) grey | | Viewed: | 21 times | | Topic: | Inventories | |
| In Inventories, iprice writes:
| | I've just pulled apart a set (#4495 - Star Wars AT-TE Mini) that I purchased
my self, many years ago, which has been in sealed storage in my loft pretty much
since I first assembled it.
I noticed that several parts were old dark grey while the majority were dark
bluish grey.
I checked the inventory and found that all parts should have been dark bluish
grey. There was no mention of old dark grey parts.
These parts (2* 1x4 plate and 6* Hinge Plate 1 x 2 Locking with 1 Finger On Top)
are definitely old dark grey. They are not sun damaged or faded; they are full
and evenly coloured top, bottom and sides. Also no other colour parts are affected.
So
1) Is this unusual?
2) Can the Inventory reflect that this set may have old dark grey alternative
parts.
|
This set was produced after LEGO had adjusted their color palette, it is not
exactly uncommon for a mixture of new and old greys to be found in the same set
in this era. LEGO never threw anything away, so they used their remaining inventory.
The inventory will probably need to be adjusted, or at the very least a footnote.
There are other sets from the same time that are missing the same clarification.
|
|
| Author: | SylvainLS | | Posted: | Jan 13, 2021 12:02 | | Subject: | Re: Mixture of old and new dark (bluish) grey | | Viewed: | 31 times | | Topic: | Inventories | |
| In Inventories, iprice writes:
| | I've just pulled apart a set (#4495 - Star Wars AT-TE Mini) that I purchased
my self, many years ago, which has been in sealed storage in my loft pretty much
since I first assembled it.
I noticed that several parts were old dark grey while the majority were dark
bluish grey.
I checked the inventory and found that all parts should have been dark bluish
grey. There was no mention of old dark grey parts.
|
It’s not “should have been DBG,” it’s “were not reported as having been found
in DG.”
| | These parts (2* 1x4 plate and 6* Hinge Plate 1 x 2 Locking with 1 Finger On Top)
are definitely old dark grey. They are not sun damaged or faded; they are full
and evenly coloured top, bottom and sides. Also no other colour parts are affected.
So
1) Is this unusual?
2) Can the Inventory reflect that this set may have old dark grey alternative
parts.
|
It could now that you found an example.
|
|
| Author: | iprice | | Posted: | Jan 13, 2021 11:48 | | Subject: | Mixture of old and new dark (bluish) grey | | Viewed: | 81 times | | Topic: | Inventories | | Status: | Open | |
| I've just pulled apart a set (#4495 - Star Wars AT-TE Mini) that I purchased
my self, many years ago, which has been in sealed storage in my loft pretty much
since I first assembled it.
I noticed that several parts were old dark grey while the majority were dark
bluish grey.
I checked the inventory and found that all parts should have been dark bluish
grey. There was no mention of old dark grey parts.
These parts (2* 1x4 plate and 6* Hinge Plate 1 x 2 Locking with 1 Finger On Top)
are definitely old dark grey. They are not sun damaged or faded; they are full
and evenly coloured top, bottom and sides. Also no other colour parts are affected.
So
1) Is this unusual?
2) Can the Inventory reflect that this set may have old dark grey alternative
parts.
|
|
| Author: | cosmicray | | Posted: | Jan 13, 2021 09:57 | | Subject: | Re: Parts list by LEGO instruction Bag | | Viewed: | 23 times | | Topic: | Inventories | |
| In Inventories, keithmcgibbon writes:
| | Hi,
I am building The big Millenium Falcon and want to sort the parts into bags as
they appear in the instructions. I can see the inventory for the total build,
but it would make building easier if I could sort the parts into the same bags
they come is as new. Does anyone have any suggestions for where I could get
parts list arranged this way?
thanks
|
Some sets have numbered bags. Some have clear bags. When clear bags are used,
LEGO can fiddle with how parts are bagged at the factory, so the ability to predict
that is not available.
Nita Rae
|
|
| Author: | yorbrick | | Posted: | Jan 13, 2021 09:15 | | Subject: | Re: Parts list by LEGO instruction Bag | | Viewed: | 22 times | | Topic: | Inventories | |
| In Inventories, keithmcgibbon writes:
| | Hi,
I am building The big Millenium Falcon and want to sort the parts into bags as
they appear in the instructions. I can see the inventory for the total build,
but it would make building easier if I could sort the parts into the same bags
they come is as new. Does anyone have any suggestions for where I could get
parts list arranged this way?
thanks
|
Unless someone has already done it, then you will have to follow the manual part
by part but it takes some time for even a 1000 piece set. For the UCS MF, it
will take a long time!
|
|
| Author: | keithmcgibbon | | Posted: | Jan 13, 2021 08:50 | | Subject: | Parts list by LEGO instruction Bag | | Viewed: | 51 times | | Topic: | Inventories | | Status: | Open | |
| Hi,
I am building The big Millenium Falcon and want to sort the parts into bags as
they appear in the instructions. I can see the inventory for the total build,
but it would make building easier if I could sort the parts into the same bags
they come is as new. Does anyone have any suggestions for where I could get
parts list arranged this way?
thanks
|
|
| Author: | jennnifer | | Posted: | Jan 11, 2021 10:10 | | Subject: | Re: Factory-packed instructions for modulars set. | | Viewed: | 26 times | | Topic: | Inventories | |
| In Inventories, OldButGoodie writes:
| | I have a question, maybe someone knows some rule.
In the past, modular instructions were wrapped in foil sealed with a seal.
What does the number on the seal mean?
For some time now, the instructions have been wrapped in heat-sealed foil in
modulars.
Do you know what was the packing version of the instruction for 10211?
|
I have never seen instructions in foil, only loose or in plastic. Perhaps it's
a regional thing?
Anyway, search youtube for 'LEGO 10211 unboxing' to get lots of views
of the set.
Good luck,
Jen
|
|
| Author: | OldButGoodie | | Posted: | Jan 11, 2021 06:41 | | Subject: | Factory-packed instructions for modulars set. | | Viewed: | 73 times | | Topic: | Inventories | | Status: | Open | |
| I have a question, maybe someone knows some rule.
In the past, modular instructions were wrapped in foil sealed with a seal.
What does the number on the seal mean?
For some time now, the instructions have been wrapped in heat-sealed foil in
modulars.
Do you know what was the packing version of the instruction for 10211?
|
|
| Author: | JerseyGirl689 | | Posted: | Jan 6, 2021 02:34 | | Subject: | Re: Double figure in advent | | Viewed: | 30 times | | Topic: | Inventories | |
| In Inventories, tEoS writes:
| | I don't buy the advents often, even though I think the trays are really nice.
Today, I splurged for the Star Wars and Harry Potter advents and received a
duplicate figure.
It was a nice surprise. 2x of this in one set:
|
I've seen this from several people on FB too. Possibly you have the twins,
Padma and Parvati. Both are the same except the colors of the torso and skirts
are reversed.
|
| Author: | tEoS | | Posted: | Jan 5, 2021 22:50 | | Subject: | Re: Double figure in advent | | Viewed: | 22 times | | Topic: | Inventories | |
| I only bought one of the HP advents, so it was an extra.
| | Did you have another set missing or was it an extra. I had a duplicate and one
missing last year in the HP calendar.
|
|
| Author: | yorbrick | | Posted: | Jan 5, 2021 05:11 | | Subject: | Re: Double figure in advent | | Viewed: | 33 times | | Topic: | Inventories | |
| In Inventories, tEoS writes:
| | I don't buy the advents often, even though I think the trays are really nice.
Today, I splurged for the Star Wars and Harry Potter advents and received a
duplicate figure.
It was a nice surprise. 2x of this in one set:
|
Did you have another set missing or was it an extra. I had a duplicate and one
missing last year in the HP calendar.
|
|
| Author: | popsicle | | Posted: | Jan 4, 2021 23:02 | | Subject: | Re: Double figure in advent | | Viewed: | 44 times | | Topic: | Inventories | |
| In Inventories, tEoS writes:
| | I don't buy the advents often, even though I think the trays are really nice.
Today, I splurged for the Star Wars and Harry Potter advents and received a
duplicate figure.
It was a nice surprise. 2x of this in one set:
|
Nice indeed. A sign of things going your way 
|
| Author: | tEoS | | Posted: | Jan 4, 2021 22:33 | | Subject: | Double figure in advent | | Viewed: | 106 times | | Topic: | Inventories | | Status: | Open | |
| I don't buy the advents often, even though I think the trays are really nice.
Today, I splurged for the Star Wars and Harry Potter advents and received a
duplicate figure.
It was a nice surprise. 2x of this in one set:
|
|
| Author: | Brickwilbo | | Posted: | Jan 2, 2021 11:17 | | Subject: | Re: Reverse Part out? | | Viewed: | 37 times | | Topic: | Inventories | |
| In Inventories, jasonpenn writes:
| | That was the first thing I tried, Doesn't work 
|
https://www.bricklink.com/help.asp?helpID=197
| |
In Inventories, BrickenbergNC writes:
| | In Inventories, jasonpenn writes:
| | Hey everyone,
I feel like this was a thing and now I can't figure it out. Is there a way
to part out a set from my inventory? Case in point, I'm looking at the part
out value for and I already have about 5k of the pieces in inventory.
Is there a way to take all of those pieces out of my inventory with a reverse
part out?
Thanks in advance!
Jason
|
Part out a negative quantity of the set.
|
|
|
|
| Author: | jasonpenn | | Posted: | Jan 2, 2021 11:07 | | Subject: | Re: Reverse Part out? | | Viewed: | 21 times | | Topic: | Inventories | |
| That was the first thing I tried, Doesn't work
In Inventories, BrickenbergNC writes:
| | In Inventories, jasonpenn writes:
| | Hey everyone,
I feel like this was a thing and now I can't figure it out. Is there a way
to part out a set from my inventory? Case in point, I'm looking at the part
out value for and I already have about 5k of the pieces in inventory.
Is there a way to take all of those pieces out of my inventory with a reverse
part out?
Thanks in advance!
Jason
|
Part out a negative quantity of the set.
|
|
|
| Author: | BrickenbergNC | | Posted: | Jan 1, 2021 23:59 | | Subject: | Re: Reverse Part out? | | Viewed: | 40 times | | Topic: | Inventories | |
| In Inventories, jasonpenn writes:
| | Hey everyone,
I feel like this was a thing and now I can't figure it out. Is there a way
to part out a set from my inventory? Case in point, I'm looking at the part
out value for and I already have about 5k of the pieces in inventory.
Is there a way to take all of those pieces out of my inventory with a reverse
part out?
Thanks in advance!
Jason
|
Part out a negative quantity of the set.
|
|
| Author: | jasonpenn | | Posted: | Jan 1, 2021 23:23 | | Subject: | Reverse Part out? | | Viewed: | 122 times | | Topic: | Inventories | | Status: | Open | |
| Hey everyone,
I feel like this was a thing and now I can't figure it out. Is there a way
to part out a set from my inventory? Case in point, I'm looking at the part
out value for and I already have about 5k of the pieces in inventory.
Is there a way to take all of those pieces out of my inventory with a reverse
part out?
Thanks in advance!
Jason
|
|
| Author: | Bricktrain | | Posted: | Jan 1, 2021 04:45 | | Subject: | Re: Opening a MISB Set 8285-1 | | Viewed: | 39 times | | Topic: | Inventories | |
| In Inventories, Give.Me.A.Brick writes:
| | In Inventories, randyf writes:
| | In Inventories, Give.Me.A.Brick writes:
| | In Inventories, Bricktrain writes:
| | In Inventories, randyf writes:
| | In Inventories, Give.Me.A.Brick writes:
| | In Inventories, randyf writes:
| | In Inventories, Give.Me.A.Brick writes:
| | Hi,
I'm opening a MISB:
Let me know if you want ask any questions regarding inventory. I will keep it
in box for 1 week.
For what I could gather so far, there are 3 versions of this set.
|
I believe there are only two.
| | Mine comes with 6x Wheels + 8x 75535 Connector in Mettalic Silver.
|
You have the first version.
| | Can't find the Factory Run number on the seal, may it has faded or never
had it.
Glad to help in anything I can.
|
I researched this set extensively earlier this year, and the inventory will probably
not require any further changes. But thank you for the offer. 
Cheers,
Randy
|
Hi Randy,
I do believe that the very first version had 10 Metallic Silver wheels.
That's what I remember from my own MISB set from my personal collection but
I didn't document it so not 100% sure. But user bricktrain in eurobricks
seems to agree:
https://www.eurobricks.com/forum/index.php?/forums/topic/172938-questions-about-8285-tow-truck/
I do believe he's on BrickLink too, it would be awesome if he joined this
thread.
Cheers,
Renato
|
I did not find any evidence in my research that showed any set having 10 silver
wheels, and I looked at a lot of documented sealed sets. If there is definitive
proof somewhere in pictures that shows a sealed set with 10 silver wheels, then
I can adjust the inventory for that.
Cheers,
Randy
|
My original 4 sets had 10 silver wheels, as did one I recently purchased used
in a collection I bought. The last w/o new ones I bought had 6 silver and 4 grey
wheels, later buyers found 10 grey wheels. That is why the inventory showed
the 3 options.
|
Thank you Paul,
That's exactly my recollection and the photo depicting the Model B shows
at least 8 metallic silver wheels (although the photos are not always 100% accurate
too).
|
My original comment still stands. If there is definitive proof somewhere in pictures
that shows a sealed set with 10 silver wheels, then I can adjust the inventory
for that. I will not be making changes based on recollection or on prototype
set images.
|
Maybe there is a language barrier here, but I don't find this wording very
amicable?
I never suggested that you would make changes to the inventory, I only offered
my help if anyone had questions about the version I have at hand. That's
all.
I suggested that are 3 versions, you said there are 2, according to your investigations.
My "recollection" is corroborated by Bricktrain, who bought 4 (four) MISB sets
plus 1 (one) second handed with 10 metallic silver wheels, back in the day.
For *me* that is proof enough.
I don't need changes on the inventory, didn't ask for that, thank you.
|
Its funny that the set pictures all show ten metallic silver wheels
|
|
| Author: | jennnifer | | Posted: | Dec 29, 2020 19:18 | | Subject: | Re: Sets inventories adding | | Viewed: | 26 times | | Topic: | Inventories | |
| In Inventories, Erikschoneveld writes:
| | Thank you very much. I have always put the items at the site by filling in every
item one for one. This way is much, much, much quicker.
|
Ouch! It must have taken you so much extra time.
One other nifty thing: there is a record of the stuff you part out hidden at
the very bottom of your My Inventory page. It's called "Part Out log" and
it will list everything you part out with quantity and date.
Good luck!
Jen
|
| Author: | Erikschoneveld | | Posted: | Dec 29, 2020 15:59 | | Subject: | Re: Sets inventories adding | | Viewed: | 27 times | | Topic: | Inventories | |
| Thank you very much. I have always put the items at the site by filling in every
item one for one. This way is much, much, much quicker.
|
| Author: | jennnifer | | Posted: | Dec 29, 2020 15:43 | | Subject: | Re: Sets inventories adding | | Viewed: | 30 times | | Topic: | Inventories | |
| In Inventories, Erikschoneveld writes:
| | Is it possible to put a inventorie from a set in one click to my store. I always
have a lot of work to put my pieces to my site. So I hope there is a quick way
to do it. I hope that somebody from Holland will tell me how to do it in dutch.
|
|
|
| Author: | Erikschoneveld | | Posted: | Dec 29, 2020 14:22 | | Subject: | Sets inventories adding | | Viewed: | 56 times | | Topic: | Inventories | | Status: | Open | |
| Is it possible to put a inventorie from a set in one click to my store. I always
have a lot of work to put my pieces to my site. So I hope there is a quick way
to do it. I hope that somebody from Holland will tell me how to do it in dutch.
|
|
| Author: | uvt203 | | Posted: | Dec 29, 2020 08:48 | | Subject: | Re: Item delete request back into inventory | | Viewed: | 20 times | | Topic: | Inventories | |
| In Inventories, Stellar writes:
| | In Inventories, bengreen28 writes:
| | I have just had to remove a load of items off an order as the buyer didn't
want them anymore.
I submitted the requests and the buyer has approved the request to remove them.
How do I go about getting them added back into my store? reading the instructions
it says that if the buyer submitted the request and the seller agrees then they
will be added back.
I can't seem to find anything about adding them from the other way around.
It seems I now have to add each part and quantity by hand is that the case?
|
Yeah... For now only if the Buyer requests the cancelation is when you can add
them back if you want.
The systems thinks that if the sellers does the request is because they no longer
have the items.
It would be good to make a suggestion to change that and have the option always,
as most times the sellers do this is by buyer request.
|
+1
|
|
| Author: | Stellar | | Posted: | Dec 29, 2020 06:26 | | Subject: | Re: Item delete request back into inventory | | Viewed: | 26 times | | Topic: | Inventories | |
| In Inventories, bengreen28 writes:
| | I have just had to remove a load of items off an order as the buyer didn't
want them anymore.
I submitted the requests and the buyer has approved the request to remove them.
How do I go about getting them added back into my store? reading the instructions
it says that if the buyer submitted the request and the seller agrees then they
will be added back.
I can't seem to find anything about adding them from the other way around.
It seems I now have to add each part and quantity by hand is that the case?
|
Yeah... For now only if the Buyer requests the cancelation is when you can add
them back if you want.
The systems thinks that if the sellers does the request is because they no longer
have the items.
It would be good to make a suggestion to change that and have the option always,
as most times the sellers do this is by buyer request.
|
|
| Author: | bengreen28 | | Posted: | Dec 29, 2020 06:20 | | Subject: | Item delete request back into inventory | | Viewed: | 58 times | | Topic: | Inventories | | Status: | Open | |
| I have just had to remove a load of items off an order as the buyer didn't
want them anymore.
I submitted the requests and the buyer has approved the request to remove them.
How do I go about getting them added back into my store? reading the instructions
it says that if the buyer submitted the request and the seller agrees then they
will be added back.
I can't seem to find anything about adding them from the other way around.
It seems I now have to add each part and quantity by hand is that the case?
|
| Author: | randyipp | | Posted: | Dec 27, 2020 17:50 | | Subject: | Re: Remarks using Brickstock | | Viewed: | 29 times | | Topic: | Inventories | |
| In Inventories, Brique03 writes:
| | Don't you have a problem importing your inventory on Brickstock? I can't do it tonight
|
Looks like it started working again finally...
|
| Author: | Brique03 | | Posted: | Dec 27, 2020 14:11 | | Subject: | Re: Remarks using Brickstock | | Viewed: | 24 times | | Topic: | Inventories | |
| Hello, this has always been the case for me, the modification of the remark never
worked in mass update from Brickstock to Bricklink. Don't you have a problem
importing your inventory on Brickstock? I can't do it tonight
In Inventories, TempleOfBricks writes:
| | Somehow can't update my remarks using Brickstock
example:
If i ONLY change my remarks and update it to Bricklink it does not work, change
pricing however in Brickstock and then update works flawless...
any solutions?
greetz Alexander
|
|
| Author: | TempleOfBricks | | Posted: | Dec 24, 2020 13:14 | | Subject: | Remarks using Brickstock | | Viewed: | 98 times | | Topic: | Inventories | | Status: | Open | |
| Somehow can't update my remarks using Brickstock
example:
If i ONLY change my remarks and update it to Bricklink it does not work, change
pricing however in Brickstock and then update works flawless...
any solutions?
greetz Alexander
|
|
| Author: | randyipp | | Posted: | Dec 18, 2020 14:04 | | Subject: | Re: Polybag Inside Box? | | Viewed: | 45 times | | Topic: | Inventories | |
| In Inventories, Turez writes:
| | In Inventories, ybtfbiwgw writes:
| |
Looking at the listings, some sellers provided their own pictures which show
a polybag in addition to the box. It looks like the polybag could stand on its
own without the box, even having the set number on it. I would think it's
easier to ship/distribute and save on packaging if the box wasn't included.
Why would Lego double-package it like that? Did they used to do this for all
of the small sets?
|
This has nothing to do with the size of the set. All or at least most town
sets from 1997-2000 had individual printed bags. It is just a special case here
that all parts are included in one bag so it looks like it could also be a polybag
set.
(Pics saved from catawiki some time ago.)
|
* | | 4561-1 (Inv) Railway Express with Transformer and Speed Regulator
618 Parts, 9 Minifigures, 1999
Sets: Train: 9V |
Had similar bags. Also approaching the Lego time of near bankruptcy. The only
waste I see is the printing though, as the parts would have been in a bag anyway.
|
|
| Author: | Turez | | Posted: | Dec 18, 2020 11:38 | | Subject: | Re: Polybag Inside Box? | | Viewed: | 53 times | | Topic: | Inventories | |
| In Inventories, ybtfbiwgw writes:
| |
Looking at the listings, some sellers provided their own pictures which show
a polybag in addition to the box. It looks like the polybag could stand on its
own without the box, even having the set number on it. I would think it's
easier to ship/distribute and save on packaging if the box wasn't included.
Why would Lego double-package it like that? Did they used to do this for all
of the small sets?
|
This has nothing to do with the size of the set. All or at least most town
sets from 1997-2000 had individual printed bags. It is just a special case here
that all parts are included in one bag so it looks like it could also be a polybag
set.
(Pics saved from catawiki some time ago.)
|
|
|
| Author: | wyvern | | Posted: | Dec 16, 2020 20:26 | | Subject: | Polybag Inside Box? | | Viewed: | 90 times | | Topic: | Inventories | | Status: | Open | |
|
Looking at the listings, some sellers provided their own pictures which show
a polybag in addition to the box. It looks like the polybag could stand on its
own without the box, even having the set number on it. I would think it's
easier to ship/distribute and save on packaging if the box wasn't included.
Why would Lego double-package it like that? Did they used to do this for all
of the small sets?
|
|
| Author: | wittco | | Posted: | Dec 16, 2020 19:28 | | Subject: | Re: Instrctions and/or Inv for Certified Pro Set | | Viewed: | 26 times | | Topic: | Inventories | |
| In Inventories, popsicle writes:
| | In Inventories, wittco writes:
| | Hi All:
Anyone have any suggestions on where I can find set instructions and or an inventory
for a Certified Professional Lego Set I acquired. It's a model of a Snap
On Tool Roll Cart (KRL7022). I don't know if Bricklink allows the sale of
these "approved" sets on Bricklink.Thanks!
|
Thought I'd add some visuals to your post. Nice looking set!
btw, reading up on the program that brings about these types of sets, is interesting
too: https://www.lego.com/en-us/aboutus/lego-certified-professionals/
-popsicle
|
Thanks for posting a nice photo of the outer box Popsicle! Yeah, it looks to
be a (complete) set and the box is in similar if not slightly better condition
than the one you "posted" (still nice that you posted it). I was very excited
to find this set amongst several I bought; problem is finding out info on them
is a real challenge!. FWIW, the designer of this set is the same designer of
many Lego architect sets Adam Reed Tucker..
|
|
| Author: | randyf | | Posted: | Dec 16, 2020 13:36 | | Subject: | Re: mixed 32064 and 32064b | | Viewed: | 26 times | | Topic: | Inventories | |
| In Inventories, Royroy writes:
| | In Inventories, randyf writes:
| | It is a nice oddity to collect.
|
Yeah, I have a couple of those in DBG. Do you want 1 Randy? Will ship it to you
at cost price....
|
No, that's okay. But thank you very much for the offer.
|
| Author: | Royroy | | Posted: | Dec 16, 2020 06:48 | | Subject: | Re: mixed 32064 and 32064b | | Viewed: | 22 times | | Topic: | Inventories | |
| In Inventories, randyf writes:
| | It is a nice oddity to collect.
|
Yeah, I have a couple of those in DBG. Do you want 1 Randy? Will ship it to you
at cost price....
|
| Author: | axaday | | Posted: | Dec 16, 2020 06:35 | | Subject: | Re: mixed 32064 and 32064b | | Viewed: | 24 times | | Topic: | Inventories | |
| In Inventories, SetsetBricks writes:
| | In Inventories, axaday writes:
| | In Inventories, SetsetBricks writes:
| | Hello
I have 32064 parts and I have 2 version of parts
let me explain
on a part 32064 face A it is the 32064 but on the face B it is a 32064b
have you ever seen this?
and how do you go about selling it?
in reference?
|
It has a circle around the hold on one side and not the other?
|
yes
|
On the bottom does it have supports on one side?
|
|
| Author: | popsicle | | Posted: | Dec 16, 2020 02:05 | | Subject: | Re: Instrctions and/or Inv for Certified Pro Set | | Viewed: | 40 times | | Topic: | Inventories | |
| In Inventories, wittco writes:
| | Hi All:
Anyone have any suggestions on where I can find set instructions and or an inventory
for a Certified Professional Lego Set I acquired. It's a model of a Snap
On Tool Roll Cart (KRL7022). I don't know if Bricklink allows the sale of
these "approved" sets on Bricklink.Thanks!
|
Thought I'd add some visuals to your post. Nice looking set!
btw, reading up on the program that brings about these types of sets, is interesting
too: https://www.lego.com/en-us/aboutus/lego-certified-professionals/
-popsicle
|
|
|
| Author: | wittco | | Posted: | Dec 16, 2020 00:01 | | Subject: | Instrctions and/or Inv for Certified Pro Set | | Viewed: | 62 times | | Topic: | Inventories | | Status: | Open | |
| Hi All:
Anyone have any suggestions on where I can find set instructions and or an inventory
for a Certified Professional Lego Set I acquired. It's a model of a Snap
On Tool Roll Cart (KRL7022). I don't know if Bricklink allows the sale of
these "approved" sets on Bricklink.Thanks!
|
|
| Author: | randyf | | Posted: | Dec 15, 2020 15:07 | | Subject: | Re: mixed 32064 and 32064b | | Viewed: | 32 times | | Topic: | Inventories | |
| In Inventories, SetsetBricks writes:
| | Hello
I have 32064 parts and I have 2 version of parts
let me explain
on a part 32064 face A it is the 32064 but on the face B it is a 32064b
have you ever seen this?
|
Yes. This has been mentioned many times over the years here. When putting the
mold together to manufacture some 32064 parts, someone must have accidentally
put half of the mold of the '+' version of the axle hole into the same
mold cavity as half of the mold of the 'x' version of the axle hole.
It is a nice oddity to collect.
| | and how do you go about selling it?
|
List it under either entry with a descriptive note stating that it is a manufacturing
defect that has been molded with a different shaped axle hole on each side.
It will not be added to the catalog as it is technically a manufacturing defect.
Cheers,
Randy
|
|
| Author: | qwertyboy | | Posted: | Dec 15, 2020 13:42 | | Subject: | Re: mixed 32064 and 32064b | | Viewed: | 31 times | | Topic: | Inventories | |
| In Inventories, SetsetBricks writes:
| | Hello
I have 32064 parts and I have 2 version of parts
let me explain
on a part 32064 face A it is the 32064 but on the face B it is a 32064b
have you ever seen this?
|
I have a couple of these where one side is the "old X" and the other side is
the "new X". This was also mentioned earlier:
https://www.bricklink.com/message.asp?ID=1149077
Niek.
|
| Author: | SetsetBricks | | Posted: | Dec 15, 2020 12:58 | | Subject: | Re: mixed 32064 and 32064b | | Viewed: | 26 times | | Topic: | Inventories | |
| In Inventories, axaday writes:
| | In Inventories, SetsetBricks writes:
| | Hello
I have 32064 parts and I have 2 version of parts
let me explain
on a part 32064 face A it is the 32064 but on the face B it is a 32064b
have you ever seen this?
and how do you go about selling it?
in reference?
|
It has a circle around the hold on one side and not the other?
|
yes
|
| Author: | axaday | | Posted: | Dec 15, 2020 11:45 | | Subject: | Re: mixed 32064 and 32064b | | Viewed: | 38 times | | Topic: | Inventories | |
| In Inventories, SetsetBricks writes:
| | Hello
I have 32064 parts and I have 2 version of parts
let me explain
on a part 32064 face A it is the 32064 but on the face B it is a 32064b
have you ever seen this?
and how do you go about selling it?
in reference?
|
It has a circle around the hold on one side and not the other?
|
| Author: | SetsetBricks | | Posted: | Dec 15, 2020 08:18 | | Subject: | mixed 32064 and 32064b | | Viewed: | 74 times | | Topic: | Inventories | | Status: | Open | |
| Hello
I have 32064 parts and I have 2 version of parts
let me explain
on a part 32064 face A it is the 32064 but on the face B it is a 32064b
have you ever seen this?
and how do you go about selling it?
in reference?
|
|
| Author: | Anthony_NL | | Posted: | Dec 13, 2020 06:53 | | Subject: | Re: Why new inventories not directly from Lego? | | Viewed: | 47 times | | Topic: | Inventories | |
| In Inventories, CrazyChris writes:
| | As we all know, Bricklink was bought by Lego Company a while ago.
So, I am wondering, why does it take so long ("inventory pending") until the
inventories of new sets are online here at Bricklink? What's the problem
to take them directly from the mother company and put them online from release
day #1?
|
If you see "Inventory pending" a user submitted an inventory which is pending
approval. Maybe you mean both new sets without an inventory and new sets without
an inventory pending?
Regards,
Anthony.
|
|
| Author: | hpoort | | Posted: | Dec 13, 2020 06:51 | | Subject: | Re: Why new inventories not directly from Lego? | | Viewed: | 56 times | | Topic: | Inventories | |
| In Inventories, CrazyChris writes:
| | As we all know, Bricklink was bought by Lego Company a while ago.
So, I am wondering, why does it take so long ("inventory pending") until the
inventories of new sets are online here at Bricklink? What's the problem
to take them directly from the mother company and put them online from release
day #1?
|
Admin Russell answered this several times, lastly in https://www.bricklink.com/message.asp?ID=1238586
|
|
| Author: | CrazyChris | | Posted: | Dec 13, 2020 06:42 | | Subject: | Why new inventories not directly from Lego? | | Viewed: | 105 times | | Topic: | Inventories | | Status: | Open | |
| As we all know, Bricklink was bought by Lego Company a while ago.
So, I am wondering, why does it take so long ("inventory pending") until the
inventories of new sets are online here at Bricklink? What's the problem
to take them directly from the mother company and put them online from release
day #1?
|
| Author: | Keledeb | | Posted: | Dec 8, 2020 07:05 | | Subject: | Re: Softball/baseball ball reference | | Viewed: | 28 times | | Topic: | Inventories | |
| Thank you very much, I had'nt seen this one
wonderful
|
| Author: | novabrick | | Posted: | Dec 8, 2020 05:53 | | Subject: | Re: Softball/baseball ball reference | | Viewed: | 48 times | | Topic: | Inventories | |
| In Inventories, Keledeb writes:
| | Hello everybody,
First post here for me.
I have this ball for ten years and I begun a mass invetory of my collection and
stamble on this item. I have no idea where it comes from as I didn't found
any reference on bricklink or internet...You guys have any idea of where it was
given or sold ?
Thank you and have a nice day
Eric
|
[g=baseball]
It's probably this item. Though that's all I can say.
Christian
novabrick-team
|
|
| Author: | Keledeb | | Posted: | Dec 8, 2020 05:36 | | Subject: | Softball/baseball ball reference | | Viewed: | 83 times | | Topic: | Inventories | | Status: | Open | |
| Hello everybody,
First post here for me.
I have this ball for ten years and I begun a mass invetory of my collection and
stamble on this item. I have no idea where it comes from as I didn't found
any reference on bricklink or internet...You guys have any idea of where it was
given or sold ?
Thank you and have a nice day
Eric
|
|
|
| Author: | randyf | | Posted: | Dec 6, 2020 23:40 | | Subject: | Re: 3069bpc1 in set 21324 is incorrect | | Viewed: | 28 times | | Topic: | Inventories | |
| In Inventories, jedvii writes:
| | In Inventories, paulvdb writes:
| | In Inventories, jedvii writes:
| | There is a 3069bpc1 in Dark Bluish Gray in the Sesame Street set #21324. I am
parting one out and I don't have a 3069bpc1 in DBG, but do have a different
1x2 tile with a similar print in LIGHT bluish Gray. I'm attaching a picture
of it here. Can someone change the set and/or verify that the 3069bpc1 in DGB
is NOT in the set? I couldn't find a part that matched the piece I have.
If it is a new piece, you can use my picture if needed.
-jed
|
This is a new piece. But the old 3069bpc1 has also been found in this set. So
the new piece should be added to the inventory as an alternate.
|
I tried to make an inventory change for it, but it was over my head on how to
do it. Maybe someone else will give it a go.
|
The new part first needs to be added to the BrickLink catalog before it can be
added as an alternate to the set inventory.
Cheers,
Randy
|
|
| Author: | jedvii | | Posted: | Dec 6, 2020 15:12 | | Subject: | Re: 3069bpc1 in set 21324 is incorrect | | Viewed: | 26 times | | Topic: | Inventories | |
| In Inventories, paulvdb writes:
| | In Inventories, jedvii writes:
| | There is a 3069bpc1 in Dark Bluish Gray in the Sesame Street set #21324. I am
parting one out and I don't have a 3069bpc1 in DBG, but do have a different
1x2 tile with a similar print in LIGHT bluish Gray. I'm attaching a picture
of it here. Can someone change the set and/or verify that the 3069bpc1 in DGB
is NOT in the set? I couldn't find a part that matched the piece I have.
If it is a new piece, you can use my picture if needed.
-jed
|
This is a new piece. But the old 3069bpc1 has also been found in this set. So
the new piece should be added to the inventory as an alternate.
|
I tried to make an inventory change for it, but it was over my head on how to
do it. Maybe someone else will give it a go.
|
|
| Author: | bje | | Posted: | Dec 6, 2020 11:04 | | Subject: | Re: Mass update inventory: dimension | | Viewed: | 33 times | | Topic: | Inventories | |
| In Inventories, Gaston.La.Brick writes:
| | I want to mass update the dimensions of the minifigs in my inventory.
|
You should not at this time, see below.
| |
Is it possible using the BrickLink user interface? Or should I look into a solution
using inventory download, adjusting the fields on my computer and re-upload the
inventory?
|
Not on BL, you have to use xml files to mass edit dimensions. And do not do this
at least until BL has fixed the new improved inventory page which still does
not work. If you make your own dimensions and change anything (quantities, prices,
settings, tiers whatever) the z dimension become the same as the x dimension
and you have to redo everything you did for the dimension change in the first
case.
If you decide to continue, change all your minifigs to volume by downloading
your inventory, keeping the lot numbers and making the condition of INVTREATAS
equal to S.
Then set your dimensions with INVDIMX, INVDIMY and INVDIMZ for each individual
minifig or pick a standard dimension and copy that in. Upload the new xml file
as a mass update.
Make sure you keep backups of the files and edit them manually every time you
add, remove of sell a lot. See the below threads as well.
https://www.bricklink.com/messageThread.asp?ID=260157&nID=1166489
https://www.bricklink.com/messageThread.asp?ID=262173&nID=1173595
|
|
| Author: | Gaston.La.Brick | | Posted: | Dec 6, 2020 10:12 | | Subject: | Mass update inventory: dimension | | Viewed: | 37 times | | Topic: | Inventories | | Status: | Open | |
| I want to mass update the dimensions of the minifigs in my inventory.
Is it possible using the BrickLink user interface? Or should I look into a solution
using inventory download, adjusting the fields on my computer and re-upload the
inventory?
|
|
| Author: | SylvainLS | | Posted: | Dec 5, 2020 12:22 | | Subject: | Re: Alternate Items question | | Viewed: | 22 times | | Topic: | Inventories | |
| In Help, kcanavan writes:
| | Hi, a bit new to BrickLink so wondering on an inventory list for a set, if a
different color appears in the “alternate items” section, does that mean that
when the set was originally purchased, that it could have included alternate
items (like color) in the set purchased?
|
Yes.
Alternates generally are about variants (type of clip…), but they also cover
change in colour (mostly for Great Colour Shift of 2003 when the old greys were
replaced by the bluish greys (among other colour changes)).
Note that you can also find a mix of the Alternate and Regular in a new sealed
set: LEGO just put whatever they have, they don’t care about variants like BL
does.
So if the BL inventory says N parts of variant a in Regular and N parts of variant
b in Alternate, you may find any combination of variants a and b in your N parts.
There’s a special use for the Alternate section: when a set has been revised
(different versions but still the same set for LEGO). In that case, admins use
the MID (match ID) 99 (rightmost column). And there’s a note at the end of the
inventory.
|
|
| Author: | kcanavan | | Posted: | Dec 5, 2020 12:05 | | Subject: | Alternate Items question | | Viewed: | 46 times | | Topic: | Inventories | | Status: | Open | |
| Hi, a bit new to BrickLink so wondering on an inventory list for a set, if a
different color appears in the “alternate items” section, does that mean that
when the set was originally purchased, that it could have included alternate
items (like color) in the set purchased?
|
|
| Author: | Niels_T | | Posted: | Dec 5, 2020 03:29 | | Subject: | Re: Looking for admin help with the 080 set | | Viewed: | 31 times | | Topic: | Inventories | |
| Thanks, but so far it looks likme I got help
In Inventories, randyf writes:
| | Please post images of what you are referring to as well as what you believe the
mistakes to be. We can take it from there.
Cheers,
Randy
In Inventories, Niels_T writes:
| | I'm not so good at this inventory stuff so if an admin would help it would
be very helpfull.
There are muliple mistakes in the inventory for set 080-1 Basic Building Set
with Train.
Reason for so many mistakes are that some of the instructions are on the trays
inside the box.
BR
Niels
|
|
|
|
| Author: | paulvdb | | Posted: | Dec 4, 2020 15:02 | | Subject: | Re: 3069bpc1 in set 21324 is incorrect | | Viewed: | 25 times | | Topic: | Inventories | |
| In Inventories, jedvii writes:
| | There is a 3069bpc1 in Dark Bluish Gray in the Sesame Street set #21324. I am
parting one out and I don't have a 3069bpc1 in DBG, but do have a different
1x2 tile with a similar print in LIGHT bluish Gray. I'm attaching a picture
of it here. Can someone change the set and/or verify that the 3069bpc1 in DGB
is NOT in the set? I couldn't find a part that matched the piece I have.
If it is a new piece, you can use my picture if needed.
-jed
|
This is a new piece. But the old 3069bpc1 has also been found in this set. So
the new piece should be added to the inventory as an alternate.
|
|
| Author: | jedvii | | Posted: | Dec 4, 2020 14:56 | | Subject: | 3069bpc1 in set 21324 is incorrect | | Viewed: | 58 times | | Topic: | Inventories | | Status: | Open | |
| There is a 3069bpc1 in Dark Bluish Gray in the Sesame Street set #21324. I am
parting one out and I don't have a 3069bpc1 in DBG, but do have a different
1x2 tile with a similar print in LIGHT bluish Gray. I'm attaching a picture
of it here. Can someone change the set and/or verify that the 3069bpc1 in DGB
is NOT in the set? I couldn't find a part that matched the piece I have.
If it is a new piece, you can use my picture if needed.
-jed
|
|
|
| Author: | axaday | | Posted: | Dec 1, 2020 11:19 | | Subject: | Re: Inventory for set 4002018 | | Viewed: | 36 times | | Topic: | Inventories | |
| In Inventories, inazuma writes:
| | Hello!
I submitted an inventory for the set 4002018 almost a year ago, and it is still
waiting for approval. Do you have any updated information about the process?
I also provided a scan of the instructions part list.
Thank you!
Szilard
|
It looks like it needs the minifigs added, minifig parts subtracted, and extras
counted.
|
| Author: | inazuma | | Posted: | Dec 1, 2020 11:12 | | Subject: | Inventory for set 4002018 | | Viewed: | 55 times | | Topic: | Inventories | | Status: | Open | |
| Hello!
I submitted an inventory for the set 4002018 almost a year ago, and it is still
waiting for approval. Do you have any updated information about the process?
I also provided a scan of the instructions part list.
Thank you!
Szilard
|
| Author: | randyf | | Posted: | Nov 30, 2020 11:47 | | Subject: | Re: Looking for admin help with the 080 set | | Viewed: | 27 times | | Topic: | Inventories | |
| Please post images of what you are referring to as well as what you believe the
mistakes to be. We can take it from there.
Cheers,
Randy
In Inventories, Niels_T writes:
| | I'm not so good at this inventory stuff so if an admin would help it would
be very helpfull.
There are muliple mistakes in the inventory for set 080-1 Basic Building Set
with Train.
Reason for so many mistakes are that some of the instructions are on the trays
inside the box.
BR
Niels
|
|
|
| Author: | Niels_T | | Posted: | Nov 30, 2020 06:35 | | Subject: | Looking for admin help with the 080 set | | Viewed: | 83 times | | Topic: | Inventories | | Status: | Open | |
| I'm not so good at this inventory stuff so if an admin would help it would
be very helpfull.
There are muliple mistakes in the inventory for set 080-1 Basic Building Set
with Train.
Reason for so many mistakes are that some of the instructions are on the trays
inside the box.
BR
Niels
|
| Author: | darkrix | | Posted: | Nov 29, 2020 15:29 | | Subject: | Re: looking for set containing | | Viewed: | 21 times | | Topic: | Inventories | |
| In Inventories, darkrix writes:
| | I am searching sets which contain a part that is n'ont références in database.
It's a part like 57029c01 but colored in peuple with a little black part.
On thé part it's written Lego 1-01 32074
|
Thanx !!!!!
|
| Author: | Brick_Arena | | Posted: | Nov 29, 2020 05:55 | | Subject: | Anyone have Bricksync 1.7.1 for Mac | | Viewed: | 43 times | | Topic: | Inventories | | Status: | Open | |
| Hi, Just wondered if anyone had a compiled version of Bricksync 1.7.1 for Mac
they would be willing to share.
Thanks in advance.
|
| Author: | yensid | | Posted: | Nov 28, 2020 06:38 | | Subject: | Re: looking for set containing | | Viewed: | 27 times | | Topic: | Inventories | |
| In Inventories, yensid writes:
| | In Inventories, darkrix writes:
| | I am searching sets which contain a part that is n'ont références in database.
It's a part like 57029c01 but colored in peuple with a little black part.
On thé part it's written Lego 1-01 32074
|
The number on the part is correct (32074). This version is available in purple
with a black trigger
|
Sorry, realized you were looking for the sets containing the purple version of
the part. Here they are:
|
|
| Author: | yensid | | Posted: | Nov 28, 2020 05:53 | | Subject: | Re: looking for set containing | | Viewed: | 36 times | | Topic: | Inventories | |
| In Inventories, darkrix writes:
| | I am searching sets which contain a part that is n'ont références in database.
It's a part like 57029c01 but colored in peuple with a little black part.
On thé part it's written Lego 1-01 32074
|
The number on the part is correct (32074). This version is available in purple
with a black trigger
|
|
| Author: | SylvainLS | | Posted: | Nov 28, 2020 05:45 | | Subject: | Re: looking for set containing | | Viewed: | 26 times | | Topic: | Inventories | |
| In Inventories, darkrix writes:
| | I am searching sets which contain a part that is n'ont références in database.
It's a part like 57029c01 but colored in peuple with a little black part.
On thé part it's written Lego 1-01 32074
|
(L’autocorrection est très drôle  )
Sur la page the 57029c01, just sous l’image, il y a « Related Items ». Clique
sur « Expand » à droite et tu as un lien vers
Aussi, quand tu as un numéro de pièce, comme 32074 (1-01, c’est le n° de moule
et la cavité dans le moule), et que c’est une pièce avec décor ou composée, cherche
« 32074* », l’astérisque est un joker.
|
|
| Author: | darkrix | | Posted: | Nov 28, 2020 05:10 | | Subject: | looking for set containing | | Viewed: | 87 times | | Topic: | Inventories | | Status: | Open | |
| I am searching sets which contain a part that is n'ont références in database.
It's a part like 57029c01 but colored in peuple with a little black part.
On thé part it's written Lego 1-01 32074
|
| Author: | Stellar | | Posted: | Nov 27, 2020 04:14 | | Subject: | Re: Remarks | | Viewed: | 25 times | | Topic: | Inventories | |
| In Inventories, Technicology writes:
| | Help!
A lot of my remarks have disappeared!!??..
Parted out 2 x 21319 sets in normal way,started to put parts away and all locations
in remarks have gone!..
For info I use Brick Freedom to sync..Could this be the issue?..
Is there any way to restore all the values?
Causing me a huge headache!
|
Most mistakes like this are almost human made.
But if you sync with the other marketplace, then there you have a log of remarks
changes in each item
|
|
| Author: | elias3 | | Posted: | Nov 27, 2020 01:21 | | Subject: | Re: Set 030-1 | | Viewed: | 29 times | | Topic: | Inventories | |
| In Inventories, maxx3001 writes:
| | There is at least one mistake made in a pending set.
All the 2x4 bricks need to be 3001old instead of 3001.
No idea where or how to change this.
Maxx
|
And same change for 3002old and 3003old
https://www.bricklink.com/catalogItemInv.asp?S=030-1
Stefaan
|
| Author: | MrPetovan | | Posted: | Nov 26, 2020 22:15 | | Subject: | Re: Set 030-1 | | Viewed: | 30 times | | Topic: | Inventories | |
| In Inventories, maxx3001 writes:
| | There is at least one mistake made in a pending set.
All the 2x4 bricks need to be 3001old instead of 3001.
No idea where or how to change this.
Maxx
|
Where do you see the pending inventory? I can't even see the 3001 parts.
|
|
| Author: | ErwinNL | | Posted: | Nov 26, 2020 16:15 | | Subject: | Re: Remarks | | Viewed: | 29 times | | Topic: | Inventories | |
| In Inventories, Technicology writes:
| | Help!
A lot of my remarks have disappeared!!??..
Parted out 2 x 21319 sets in normal way,started to put parts away and all locations
in remarks have gone!..
For info I use Brick Freedom to sync..Could this be the issue?..
Is there any way to restore all the values?
Causing me a huge headache!
|
I don't think there is, maybe Brick Freedom runs backups, else contact BL
and see if they can help you somehow?
Good luck.
|
| Author: | maxx3001 | | Posted: | Nov 26, 2020 16:08 | | Subject: | Set 030-1 | | Viewed: | 70 times | | Topic: | Inventories | | Status: | Open | |
| There is at least one mistake made in a pending set.
All the 2x4 bricks need to be 3001old instead of 3001.
No idea where or how to change this.
Maxx
|
|
| Author: | popsicle | | Posted: | Nov 26, 2020 15:24 | | Subject: | Re: Sort / view my inventory | | Viewed: | 21 times | | Topic: | Inventories | |
| In Inventories, C0lsanders_ writes:
| | Alright, I feel dumb. Let's all pretend this never happened, shall we? Good.
|
No need to feel that way. Sometimes it's only a nudge in another direction
that's needed, for any of us
| |
In Inventories, C0lsanders_ writes:
| | Well, I know see that I overlooked your second screenshot, the whole inventory
sort. But still no way to sort a page within.
In Inventories, C0lsanders_ writes:
| | Right now, I'm working on parts. So a given parts page, within my inventory,
is being sorted by lot ID. I do not see a way to change that (I don't see
either of the things you screenshot).
In Inventories, popsicle writes:
| | In Inventories, C0lsanders_ writes:
| | Going through my inventory, doing some stuff, and I notice that it is sorting
things differently than it has in the past. I think it is sorting it by lot ID,
rather than by color or brick, etc. How/where do I change it?
Thanks,
Miles (C0lsanders_)
|
Do you mean when viewing specific category pages, or your entire inventory (second
screenshot)?
|
|
|
|
|
|
| Author: | C0lsanders_ | | Posted: | Nov 26, 2020 14:19 | | Subject: | Re: Sort / view my inventory | | Viewed: | 21 times | | Topic: | Inventories | |
| Alright, I feel dumb. Let's all pretend this never happened, shall we? Good.
In Inventories, C0lsanders_ writes:
| | Well, I know see that I overlooked your second screenshot, the whole inventory
sort. But still no way to sort a page within.
In Inventories, C0lsanders_ writes:
| | Right now, I'm working on parts. So a given parts page, within my inventory,
is being sorted by lot ID. I do not see a way to change that (I don't see
either of the things you screenshot).
In Inventories, popsicle writes:
| | In Inventories, C0lsanders_ writes:
| | Going through my inventory, doing some stuff, and I notice that it is sorting
things differently than it has in the past. I think it is sorting it by lot ID,
rather than by color or brick, etc. How/where do I change it?
Thanks,
Miles (C0lsanders_)
|
Do you mean when viewing specific category pages, or your entire inventory (second
screenshot)?
|
|
|
|
|
| Author: | C0lsanders_ | | Posted: | Nov 26, 2020 14:14 | | Subject: | Re: Sort / view my inventory | | Viewed: | 17 times | | Topic: | Inventories | |
| Well, I know see that I overlooked your second screenshot, the whole inventory
sort. But still no way to sort a page within.
In Inventories, C0lsanders_ writes:
| | Right now, I'm working on parts. So a given parts page, within my inventory,
is being sorted by lot ID. I do not see a way to change that (I don't see
either of the things you screenshot).
In Inventories, popsicle writes:
| | In Inventories, C0lsanders_ writes:
| | Going through my inventory, doing some stuff, and I notice that it is sorting
things differently than it has in the past. I think it is sorting it by lot ID,
rather than by color or brick, etc. How/where do I change it?
Thanks,
Miles (C0lsanders_)
|
Do you mean when viewing specific category pages, or your entire inventory (second
screenshot)?
|
|
|
|
| Author: | C0lsanders_ | | Posted: | Nov 26, 2020 14:03 | | Subject: | Re: Sort / view my inventory | | Viewed: | 27 times | | Topic: | Inventories | |
| Right now, I'm working on parts. So a given parts page, within my inventory,
is being sorted by lot ID. I do not see a way to change that (I don't see
either of the things you screenshot).
In Inventories, popsicle writes:
| | In Inventories, C0lsanders_ writes:
| | Going through my inventory, doing some stuff, and I notice that it is sorting
things differently than it has in the past. I think it is sorting it by lot ID,
rather than by color or brick, etc. How/where do I change it?
Thanks,
Miles (C0lsanders_)
|
Do you mean when viewing specific category pages, or your entire inventory (second
screenshot)?
|
|
|
| Author: | popsicle | | Posted: | Nov 26, 2020 13:45 | | Subject: | Re: Sort / view my inventory | | Viewed: | 24 times | | Topic: | Inventories | |
| In Inventories, C0lsanders_ writes:
| | Going through my inventory, doing some stuff, and I notice that it is sorting
things differently than it has in the past. I think it is sorting it by lot ID,
rather than by color or brick, etc. How/where do I change it?
Thanks,
Miles (C0lsanders_)
|
Do you mean when viewing specific category pages, or your entire inventory (second
screenshot)?
|
|
| Author: | C0lsanders_ | | Posted: | Nov 26, 2020 13:37 | | Subject: | Sort / view my inventory | | Viewed: | 58 times | | Topic: | Inventories | | Status: | Open | |
| Going through my inventory, doing some stuff, and I notice that it is sorting
things differently than it has in the past. I think it is sorting it by lot ID,
rather than by color or brick, etc. How/where do I change it?
Thanks,
Miles (C0lsanders_)
|
| Author: | Technicology | | Posted: | Nov 26, 2020 13:33 | | Subject: | Remarks | | Viewed: | 70 times | | Topic: | Inventories | | Status: | Open | |
| Help!
A lot of my remarks have disappeared!!??..
Parted out 2 x 21319 sets in normal way,started to put parts away and all locations
in remarks have gone!..
For info I use Brick Freedom to sync..Could this be the issue?..
Is there any way to restore all the values?
Causing me a huge headache!
|
|
| Author: | bje | | Posted: | Nov 26, 2020 13:07 | | Subject: | Re: Stockroom | | Viewed: | 24 times | | Topic: | Inventories | |
| In Inventories, Lulumika writes:
| | Hi there,
Is there are shortcut to where I can look at the Stockroom? I am confused (after
9 years of doing this) where the stockroom is.
Thanks,
M.
|
https://www.bricklink.com/myActivity.asp
Under the heading "selling" you will see your lots for sale. Next to that are
the reserved lots and next to that all lots in stockrooms. Click on that for
details.
Alternatively, if you only sue Stockroom A, go to:
https://www.bricklink.com/inventory.asp
Under "Search My Inventory" Select stockroom A and click on Go
|
| Author: | Brickwilbo | | Posted: | Nov 26, 2020 13:06 | | Subject: | Re: Stockroom | | Viewed: | 24 times | | Topic: | Inventories | |
| In Inventories, Lulumika writes:
| | Hi there,
Is there are shortcut to where I can look at the Stockroom? I am confused (after
9 years of doing this) where the stockroom is.
Thanks,
M.
|
https://www.bricklink.com/inventory.asp?itemView=7
|
| Author: | Lulumika | | Posted: | Nov 26, 2020 13:02 | | Subject: | Stockroom | | Viewed: | 66 times | | Topic: | Inventories | | Status: | Open | |
| Hi there,
Is there are shortcut to where I can look at the Stockroom? I am confused (after
9 years of doing this) where the stockroom is.
Thanks,
M.
|
|
| Author: | Trusconi | | Posted: | Nov 22, 2020 05:00 | | Subject: | Re: Lego House set list | | Viewed: | 31 times | | Topic: | Inventories | |
| In Inventories, casper06 writes:
| | The 40199 is not Lego House but Billund Airport located very close by. It is
the only exclusive set from the airport shop, and not availiable anymore
Right now they have 4 exclusive sets in Lego House + some merchandise
21037
40366
40501
4000026 (soon retiring)
Thank you
|
Thank you for your answer but, as you can see in the pictures attached, all the
sets I have listed have the "LEGO House" logo except for:
4000010 the writing "House" is different
21037 is defined as Architecture
40199 and 4000026 are exclusive to Billund Airport
Set 6232682 is not listed everywhere because it is a gift for Kladno employees
made in 100 or 200 pieces.
P.s. i insert also the "personalized minifigures" because i made it last week
inside LEGO House in Billund
If you are aware of other sets with the logo let me know
Thanks
Manu
|
|
|
| Author: | steverus | | Posted: | Nov 21, 2020 18:49 | | Subject: | Re: Alternate heads | | Viewed: | 18 times | | Topic: | Inventories | |
| I've had same issue with Ninjago figs.
Njo008, Njo020, Njo023 for example.
Inventory lists as a blocked open stud, hollow stud variant is not linked to
any minifig, but listed as an alternative in the set each minifig comes in. I've
just listed as hollow stud variant in comments on listing.
|
|
| Author: | Ninepartsred | | Posted: | Nov 21, 2020 18:31 | | Subject: | Re: Alternate heads | | Viewed: | 22 times | | Topic: | Inventories | |
| In Inventories, SylvainLS writes:
| | In Inventories, Ninepartsred writes:
| | In Inventories, popsicle writes:
| | In Inventories, Ninepartsred writes:
| | TL;DR version - do the rules about incomplete minifigs also cover substitutions?
I.e. a head that has the same print but a different stud.
|
|
|
Not “substitutions,” “alternates.”
“Substitution” implies the part has been replaced (i.e. original removed, other
part put instead). Therefore substitutions are forbidden (for selling under
an inventory entry).
| | […]
| | The minifigures in that set’s production timeline stretched through TLG period
of mold changeover.
It's common here that listings don’t denote this.
|
|
And when it’s done, it’s generally only with a note, as there’s no possibility
for alternates in minifigure inventories and doubling or tripling every minifigure
is not a solution.
| | | | At some point it should
be addressed, but it's a tough one to confirm definitively.
|
|
Yeah, because, for a time, the policy was to use b for every head, even when
it was known it was wrong….
| | […]
I'm one of the latter. I would always add a comment where there's a notable
difference. I just wasn't sure if I'd be getting a visit from the inventory
police.
|
If you use the terms alternate or variant and not substitution, you should be
okay.
|
Thanks Sylvain. That helps a lot.
|
|
| Author: | SylvainLS | | Posted: | Nov 21, 2020 17:19 | | Subject: | Re: Alternate heads | | Viewed: | 21 times | | Topic: | Inventories | |
| In Inventories, Ninepartsred writes:
| | In Inventories, popsicle writes:
| | In Inventories, Ninepartsred writes:
| | TL;DR version - do the rules about incomplete minifigs also cover substitutions?
I.e. a head that has the same print but a different stud.
|
|
|
Not “substitutions,” “alternates.”
“Substitution” implies the part has been replaced (i.e. original removed, other
part put instead). Therefore substitutions are forbidden (for selling under
an inventory entry).
| | […]
| | The minifigures in that set’s production timeline stretched through TLG period
of mold changeover.
It's common here that listings don’t denote this.
|
|
And when it’s done, it’s generally only with a note, as there’s no possibility
for alternates in minifigure inventories and doubling or tripling every minifigure
is not a solution.
| | | | At some point it should
be addressed, but it's a tough one to confirm definitively.
|
|
Yeah, because, for a time, the policy was to use b for every head, even when
it was known it was wrong….
| | […]
I'm one of the latter. I would always add a comment where there's a notable
difference. I just wasn't sure if I'd be getting a visit from the inventory
police.
|
If you use the terms alternate or variant and not substitution, you should be
okay.
|
|
| Author: | Ninepartsred | | Posted: | Nov 21, 2020 16:12 | | Subject: | Re: Alternate heads | | Viewed: | 23 times | | Topic: | Inventories | |
| In Inventories, popsicle writes:
| | In Inventories, Ninepartsred writes:
| | TL;DR version - do the rules about incomplete minifigs also cover substitutions?
I.e. a head that has the same print but a different stud.
Long version - I bought a collection from a family who I know and trust. One
of the sets is an opened but complete
The inventory says the minifigs should have type C blocked open stud heads but
3 of them have type B hollow stud heads.
There aren't any which is supposedly the only one with a type
B head.
I've seen some inventories with a note to say that both stud types have been
found in a particular set or minifigure.
Substitutions, as well as incomplete minifigs, are a pet peeve, and I don't
want to list them if they break the rules. Should I request that the alternate
head be noted in the inventory or should the catalog be updated so that the type
B head is associated with both minifigs?
|
The minifigures in that set’s production timeline stretched through TLG period
of mold changeover.
It's common here that listings don’t denote this. At some point it should
be addressed, but it's a tough one to confirm definitively.
I list such minifigs with the description "latter production, hollow stud mold
type head"
Some collectors don't care to know, a good percentage do though.
|
I'm one of the latter. I would always add a comment where there's a notable
difference. I just wasn't sure if I'd be getting a visit from the inventory
police.
|
|
| Author: | popsicle | | Posted: | Nov 21, 2020 15:56 | | Subject: | Re: Alternate heads | | Viewed: | 58 times | | Topic: | Inventories | |
| In Inventories, Ninepartsred writes:
| | TL;DR version - do the rules about incomplete minifigs also cover substitutions?
I.e. a head that has the same print but a different stud.
Long version - I bought a collection from a family who I know and trust. One
of the sets is an opened but complete
The inventory says the minifigs should have type C blocked open stud heads but
3 of them have type B hollow stud heads.
There aren't any which is supposedly the only one with a type
B head.
I've seen some inventories with a note to say that both stud types have been
found in a particular set or minifigure.
Substitutions, as well as incomplete minifigs, are a pet peeve, and I don't
want to list them if they break the rules. Should I request that the alternate
head be noted in the inventory or should the catalog be updated so that the type
B head is associated with both minifigs?
|
The minifigures in that set’s production timeline stretched through TLG period
of mold changeover.
It's common here that listings don’t denote this. At some point it should
be addressed, but it's a tough one to confirm definitively.
I list such minifigs with the description "latter production, hollow stud mold
type head"
Some collectors don't care to know, a good percentage do though.
|
|
| Author: | Ninepartsred | | Posted: | Nov 21, 2020 15:39 | | Subject: | Alternate heads | | Viewed: | 88 times | | Topic: | Inventories | | Status: | Open | |
| TL;DR version - do the rules about incomplete minifigs also cover substitutions?
I.e. a head that has the same print but a different stud.
Long version - I bought a collection from a family who I know and trust. One
of the sets is an opened but complete
The inventory says the minifigs should have type C blocked open stud heads but
3 of them have type B hollow stud heads.
There aren't any which is supposedly the only one with a type
B head.
I've seen some inventories with a note to say that both stud types have been
found in a particular set or minifigure.
Substitutions, as well as incomplete minifigs, are a pet peeve, and I don't
want to list them if they break the rules. Should I request that the alternate
head be noted in the inventory or should the catalog be updated so that the type
B head is associated with both minifigs?
|
|
| Author: | casper06 | | Posted: | Nov 21, 2020 15:10 | | Subject: | Re: Lego House set list | | Viewed: | 35 times | | Topic: | Inventories | |
| The 40199 is not Lego House but Billund Airport located very close by. It is
the only exclusive set from the airport shop, and not availiable anymore
Right now they have 4 exclusive sets in Lego House + some merchandise
21037
40366
40501
4000026 (soon retiring)
Thank you
|
|
| Author: | Trusconi | | Posted: | Nov 21, 2020 11:51 | | Subject: | Lego House set list | | Viewed: | 69 times | | Topic: | Inventories | | Status: | Open | |
| Hello,
Is there someohe that know how many differenti set have bene made with "Lego
House* logo on the Box?
I mean for example 40501, Pick a brick Butterfly, build your MEAL, etc
Here Is what i found:
Set Ufficiali
40295 Chef 2017
40296 Meal 2017
40297 Duplo 2017
40356 Chef 2019
40366 Dinosaurs 2019
40501 Duck 2020
624210 Bricks 2017
4000010 House 2014
4000026 Tree 2018
6168271 LHPO 2017 (600)
LHGO LHGO 2107 (3500)
Set correlati ma non House
21037 House 2017
4000016 Airport 2014
40199 Airport 2018
Portachiavi
853711 Boy key chain 2017
853712 Brick key chain 2017
853713 Girl key chain 2017
854014 Women key chain 2020
Pick a Brick
3850060 Fish tank 1 2017
3850061 Fish tank 2 2017
3850072 Butterfly 2019
Rarità
6232682 Kladno Employee ??? (100)
Gadget
854915 Magnet 2020
853709 MUG 2020
853957 Borraccia 2020
5005423 T-shirt ???
Thank you
Manu
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
