Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | Turez | Posted: | May 16, 2021 09:30 | Subject: | Re: Inventory Change Request for Set 75188-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, clien14 writes:
| Please make changes to the following inventory:
* Delete 1 Minifigure sw1005 Resistance Bomber Pilot - Finch Dallow (Alternate) (match ID 99)
* Change 1 Minifigure sw0861 Resistance Bomber Pilot {match ID 99 to 0}
Comments from Submitter:
SW1005 should be removed and added to 75188-2 as it was a limited release with different box and instructions. Other early sets with different box and instruction releases have also gotten separate entries, such as 4502-1 blue box and 4502-2 original trilogy box
|
As long as there is no second entry for this set, these requests cannot be approved.
And from what I see it is unlikely there there will ever be a second entry.
See https://www.bricklink.com/message.asp?ID=1125322
If you want to have a second set entry, you will need to convince the catalog
side, not the inventories side.
However, the last formal request for this was discarded:
https://www.bricklink.com/message.asp?ID=1127561
|
|
Author: | Turez | Posted: | May 16, 2021 09:16 | Subject: | Re: Inventory Change Request for Set 3118-1 | Viewed: | 13 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, polip writes:
| Please make changes to the following inventory:
* Add 1 Part 6891pb02c02 Light Lime Scala Wall, Vertical Grooved 40 x 2 x 22 2/3 with Window and Door, with Stripe White on Medium Orange Pattern (Alternate) (match ID 1)
Comments from Submitter:
The 6891pb02c02 wall in the set is not light yellow. I have light lime. The image of the box is also light lime.
|
Based on the instructions (attached) and several used sets which I just checked,
this really looks like a different color than in set 3119. Could you add a photo
of your part?
We would also need one in light lime for the catalog entry.
|
|
|
Author: | Turez | Posted: | May 16, 2021 08:01 | Subject: | Re: Inventory Change Request for Set 4505-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, normann1974 writes:
| In Inventories Requests, normann1974 writes:
| Please make changes to the following inventory:
* Add 1 Part 4032b Black Plate, Round 2 x 2 with Axle Hole (x Shape) (Alternate) (match ID 1)
* Change 3 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
* Change 3 Part Yellow {44567 Hinge Plate 1 x 2 Locking with 1 Finger on Side (Undetermined Type) to 44567a Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove}
* Change 1 Part Black 4032 Plate, Round 2 x 2 with Axle Hole {match ID 0 to 1}
Comments from Submitter:
If 4032 has been improperly split, this set may never have come with 4032. Source: Parted out sealed set.
|
|
Based on previous change requests it looks like all black 4032 were 4032b at
that time. I have therefore removed 4032 from the inventory.
(4032 (with + style) was still used in other colors, though.)
|
BTW - my set didn't come with extra 2412b. Was this confirmed in a sealed
set?
|
The change log shows that the inventory originally had 2 LBG 2412b. One was removed
in October, 2004 but was added back again as an extra part in February, 2005
by nova (frequent contributer at that time and registered inventories verifier).
So yes, I would say it was confirmed in at least two sealed sets.
The extra yellow plate 1x2, however, should be in the regular items section.
It is needed to build the seaplane model on pages 21-28 and the inventory data
from LEGO.com confirm that there should be four of this part in the set. I fixed
this.
|
|
|
Author: | Turez | Posted: | May 15, 2021 03:31 | Subject: | Re: Inventory Change Request for Set 3942-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Bricklanta writes:
| Please make changes to the following inventory:
* Add 1 Part 92355a Medium Lavender Friends Accessories Sponge (Counterpart)
* Add 1 Part 92355b Medium Lavender Friends Accessories Spray Bottle with Heart (Counterpart)
* Add 4 Part 92355c Medium Lavender Friends Accessories Bow with Heart (Counterpart)
* Add 4 Part 92355d Medium Lavender Friends Accessories Bow (Counterpart)
* Add 1 Part 92355e Medium Lavender Friends Accessories Award Ribbon with Number 1 (Counterpart)
* Add 1 Part 92355f Medium Lavender Friends Accessories Award Ribbon with Number 2 (Counterpart)
* Add 1 Part 92355g Medium Lavender Friends Accessories Comb, Small with Heart (Counterpart)
* Add 1 Part 92355h Medium Lavender Friends Accessories Brush Round, Small (Counterpart)
* Add 2 Part 92355i Medium Lavender Friends Accessories Brush Oval, Large (Counterpart)
|
All these parts are already included in the inventory as part of
* | | 92355 (Inv) Friends Accessories, Animal Show and Grooming Supplies, 16 in Bag (Multipack) Parts: Friends |
Therefore these requests will not be approved.
|
|
Author: | Turez | Posted: | May 14, 2021 15:40 | Subject: | Re: Inventory Change Request for Set 2928-2 | Viewed: | 16 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, starbeanie writes:
| Please make changes to the following inventory:
* Delete 2 Part 3010pb065 White Brick 1 x 4 with Black 'LC 2928' Pattern (Sticker) - Set 2928 (Counterpart)
* Delete 1 Part 6239pb011 White Tail Shuttle with White Airline Bird on Blue Background Pattern on Both Sides (Stickers) - Set 2928 (Counterpart)
Comments from Submitter:
In a properly built set, these parts don't exist. The stickers on them are superseded by the ones on sheet 2928.2stk01 instead.
|
Based on images I have found, it looks like the ANA version is the normal set
plus the extra (loose) sticker sheet. Do you know if this is correct?
If so, I think the stickered parts do not need to be removed since the set would
still have the normal sticker sheet and instructions. The ANA stickers would
then just be an alternate building option.
|
|
Author: | Turez | Posted: | May 14, 2021 14:58 | Subject: | Re: Inventory Change Request for Set 371-2 | Viewed: | 24 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Add 1 Part bb0007pb01 Blue Electric, Motor 4.5V Type A 12 x 4 x 4 with '4,5 V.' (4.5 Volt) Pattern Stamped (Alternate) (match ID 1)
* Delete 4 Part 996ac01 Blue Electric, Connector, 1-Way Male Rounded with Hollow Pin (Banana Plug)
* Delete 1 Part x466 White Electric, Wire 12V / 4.5V with two Leads, unspecified length
* Add 1 Part 996ac96blue White Electric, Wire 4.5V with four Blue 1-prong Connectors Hollow Pin, 96 Studs Long
* Add 1 Part 3176c01 Red Plate, Modified 3 x 2 with Hole (Train Coupler Closed) with Hook
* Add 2 Part 3034 White Plate 2 x 8
* Change 1 Part Blue bb0007 Electric, Motor 4.5V Type A 12 x 4 x 4 {match ID 0 to 1}
* Change {1 to 2} Part Red 3176 Plate, Modified 3 x 2 with Hole
|
I believe
[p=]
was produced since 1968
|
???
|
|
Author: | Turez | Posted: | May 14, 2021 13:07 | Subject: | Re: Inventory Change Request for Set 7750-1 | Viewed: | 27 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
I think you forgot to change the
?
And then a few of those older posts show a set with
* | | bb0012vac01 (Inv) Electric, Train Motor 12V with Wheels Type I with 2 Round Contact Holes with 4 Light Gray Train Rim for 4.5V & 12V Locomotive Wheels (bb0012va / trainrim) Parts: Electric, Train {Red} |
but
and 6x
(Here: https://www.bricklink.com/messageThread.asp?ID=232698 )
So because of that "in-between" set I fear we cannot use only one match ID number
for all alternates here. And with multiple numbers the inventory would become
quite complicated. I'm not sure it is worth the effort.
BTW do you have evidence that the set came with
and 10x loose
at some time?
|
|
Author: | Turez | Posted: | May 13, 2021 11:00 | Subject: | Re: Inventory Change Request for Set 92176-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Arnaud_13 writes:
| Please make changes to the following inventory:
* Add 2 Part 4073 White Plate, Round 1 x 1 (Extra)
|
According to this speed build video there should indeed be at least 3 extra 1x1
round plates in white.
https://youtu.be/ar4X4IWqN9c?t=18
Request accepted (and I have adjusted the quantities manually since there already
was an extra entry for this part).
|
|
Author: | Turez | Posted: | May 13, 2021 10:18 | Subject: | Re: Inventory Change Request for Set 10027-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| In Inventories Requests, 1974 writes:
| There are a few sealed sets but could it be found out from the date code?
|
Probably. My seals had a bar code, so I couldn't read the date, but I think
the date is in the bar code.
|
These kind of boxes usually have the batch code on the top narrow side, NOT on
the seals. It is mostly *very* small and sometimes hard to find.
|
|
|
Author: | Turez | Posted: | May 13, 2021 10:11 | Subject: | Re: Inventory Change Request for Set 10027-1 | Viewed: | 30 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Add 4 Part 32064b Dark Bluish Gray Technic, Brick 1 x 2 with Axle Hole (x Shape) (Alternate) (match ID 2)
* Change 4 Part Dark Gray 32064 Technic, Brick 1 x 2 with Axle Hole {match ID 0 to 2}
Comments from Submitter:
I am sad that when I finally got my hands on one of these it does not solve the mystery.
|
Yeah, in fact, you have opened a new mystery because now I would like to know
if the set also came with dark gray
[p=32064b,10]
at some time.
| I am not sure that putting match IDs on all the DBG pieces is worthwhile, but I can do it if requested.
|
No, the inventory note is sufficient here. See also https://www.bricklink.com/message.asp?ID=1111011
|
|
Author: | Turez | Posted: | May 13, 2021 10:02 | Subject: | Re: Inventory Change Request for Set 7750-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, wichtel10000 writes:
| Please make changes to the following inventory:
* Add 1 Part 4182pb064 Black Door 1 x 4 x 5 Train Right with Finnish 'VR 7750' Pattern (Sticker) - Set 7750 (Alternate)
* Add 1 Part 4181pb064 Black Door 1 x 4 x 5 Train Left with Finnish 'VR 7750' Pattern (Sticker) - Set 7750 (Alternate)
|
There are already pending requests for these.
https://www.bricklink.com/message.asp?ID=1266947
But there is also an issue with them as discussed here:
https://www.bricklink.com/messageThread.asp?ID=255509&nID=1151122
So I'm still not sure if these stickered doors should be counterparts. But
if so, I will approve gunga's requests since he came first.
|
|
Author: | Turez | Posted: | May 12, 2021 08:40 | Subject: | Re: Inventory Change Request for Set 21117-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Zmyjak writes:
| Please make changes to the following inventory:
* Add 3 Part 19732 Black Legs Minecraft Enderman
Comments from Submitter:
Original Lego instruction book
|
These parts and the parts from your other requests are included in this figure:
Therefore your requests will not be approved.
You can click on "Break Minifigures" to see all parts from figures in the parts
list.
|
|
|
Author: | Turez | Posted: | May 11, 2021 13:36 | Subject: | Re: Inventory Change Request for Set 9797-1 | Viewed: | 36 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 1 Part 973px126c01 White Torso Paradisa Sailboat with Sunset Pattern / Yellow Arms / Yellow Hands (Alternate) (match ID 21)
* Change 1 Part White 973px126newc01 Torso Paradisa Sailboat with Sunset Pattern, Inside with Ribs (Reissue) / Yellow Arms / Yellow Hands {match ID 0 to 21}
Comments from Submitter:
Parted out 3 sets, all had the alternate version of the torso.
|
The only difference between these parts is that
is a special entry only for the current torso mold with long inside ribs (introduced
around 1998)
while the mold of
is not specified (so it can be the current but also an older mold).
See also https://www.leggodt.nl/items/lego/themes-minifigs.php?language=en
So are you saying you got the older mold ("short ribs") in your set? That would
be very unusual for a set from 2006.
|
|
Author: | Turez | Posted: | May 11, 2021 05:35 | Subject: | Inventory Change Request for Set 4002-1 | Viewed: | 38 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 2412a Blue Tile, Modified 1 x 2 Grille without Bottom Groove / Lip (match ID 1)
* Change 4 Part Blue 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip {Regular to Alternate} {match ID 0 to 1}
Comments from Submitter:
Source: Set from my personal collection which was bought new and not mixed with other parts. All 4 parts in my set are 2412a.
|
|
Author: | Turez | Posted: | May 10, 2021 17:53 | Subject: | Re: Inventory Change Request for Set 6557-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, jd5775 writes:
| In Inventories Requests, Turez writes:
| In Inventories Requests, jd5775 writes:
| Please make changes to the following inventory:
* Add 1 Part 2412a Blue Tile, Modified 1 x 2 Grille without Bottom Groove / Lip (Alternate) (match ID 1)
* Add 1 Part 2412a Red Tile, Modified 1 x 2 Grille without Bottom Groove / Lip (Alternate) (match ID 2)
* Change 1 Part Blue 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip {match ID 0 to 1}
* Change 1 Part Red 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip {match ID 0 to 2}
|
Could you please let us know what your source is for making these change requests?
(I see you have this set for sale in your store, but it is still sealed. Do you
have a second copy with open box?)
|
Sorry for omitting that. Yes, this is from a second set bought new around the
same time, and never disassembled until yesterday. I only noticed it when struggling
to remove the blue grille from the bow piece and thought it was strange that
a 1997 set would have this part variation.
|
Many thanks. There are already a few sets from 1997 in the catalog which still
had 2412a. Looks like 1997 was the last year of the transition period.
Could you also check the string lengh in your set and replace the undetermined
entry with the correct lengh?
|
|
Author: | Turez | Posted: | May 10, 2021 16:49 | Subject: | Re: Inventory Change Request for Set 3683-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Ellum writes:
| In Inventories Requests, Turez writes:
| In Inventories Requests, Ellum writes:
| In Inventories Requests, cerrutinino writes:
| Please make changes to the following inventory:
* Add 2 Part 3003 Blue Brick 2 x 2
Comments from Submitter:
From the original notice
|
I have this set with building instruction, but nowhere are the 2 part 3003 blue
brick 2 x 2 mentioned in the instruction. Maybe original submitter has mistaken
the set? I would say only a sealed set could confirm their presence in this set.
|
http://www.peeron.com/scans/3683-1/8/
|
Well not in mine. Does this mean they are considered as alternate parts? Note
that they are not mentioned in the instruction text in yours.
|
Wow this is cool - we just discovered another redesigned set!
See pics at https://www.worthpoint.com/worthopedia/pre-owned-mint-complete-lego-3683-1910486235
(attached for future reference)
Many thanks for noticing that! I will update the inventory accordingly.
|
|
|
Author: | Turez | Posted: | May 10, 2021 15:27 | Subject: | Re: Inventory Change Request for Set 3683-1 | Viewed: | 27 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Ellum writes:
| In Inventories Requests, cerrutinino writes:
| Please make changes to the following inventory:
* Add 2 Part 3003 Blue Brick 2 x 2
Comments from Submitter:
From the original notice
|
I have this set with building instruction, but nowhere are the 2 part 3003 blue
brick 2 x 2 mentioned in the instruction. Maybe original submitter has mistaken
the set? I would say only a sealed set could confirm their presence in this set.
|
http://www.peeron.com/scans/3683-1/8/
|
|
|
|
Author: | Turez | Posted: | May 10, 2021 08:43 | Subject: | Re: Inventory Change Request for Set 5956-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, samsam2 writes:
| Please make changes to the following inventory:
* Add 1 Part 5956stk01 (Not Applicable) Sticker Sheet for Set 5956 - Sheet 1 (72573/4116669) (Extra)
Comments from Submitter:
Just2Good unboxing sealed set
|
I don't think we should add that extra sticker sheet. TLG very rarely provides
an extra sticker sheet and as Yorbrick already pointed out, the two sheets stick
together so it looks like a packing error. I have found the same in a new set
a few months ago. I will leave this open for a while in case anyone wants to
add anything here.
| Another question, should the zeppelin ship be split into 2 parts, since it is
assembled only for display purposes?
|
Don't really have an opinion here. But we already have 171 parts in the inventory
while the box says there should be 170. So I would say it is okay for now to
not add another one.
|
|
Author: | Turez | Posted: | May 10, 2021 07:57 | Subject: | Re: Inventory Change Request for Set 6557-1 | Viewed: | 27 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, jd5775 writes:
| Please make changes to the following inventory:
* Add 1 Part 2412a Blue Tile, Modified 1 x 2 Grille without Bottom Groove / Lip (Alternate) (match ID 1)
* Add 1 Part 2412a Red Tile, Modified 1 x 2 Grille without Bottom Groove / Lip (Alternate) (match ID 2)
* Change 1 Part Blue 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip {match ID 0 to 1}
* Change 1 Part Red 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip {match ID 0 to 2}
|
Could you please let us know what your source is for making these change requests?
(I see you have this set for sale in your store, but it is still sealed. Do you
have a second copy with open box?)
|
|
Author: | Turez | Posted: | May 8, 2021 12:06 | Subject: | Re: Inventory Change Request for Set 21307-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, d4n33l writes:
| Please make changes to the following inventory:
* Delete 1 Part 30553 Black Hinge Cylinder 1 x 2 Locking with 2 Fingers, 9 Teeth and Axle Hole on Ends with Slots (Extra)
Comments from Submitter:
You can see an evidence here
https://youtu.be/xAxMAoHMUIk?t=936
|
This extra part was requested to be added by a known and reliable contributer:
https://www.bricklink.com/messageThread.asp?ID=231366
And in addition to that I just checked the set in my personal collection and
it has this extra part. Therefore this request will not be accepted.
|
|
Author: | Turez | Posted: | May 8, 2021 07:18 | Subject: | Re: Inventory Change Request for Set 42115-1 | Viewed: | 27 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, d4n33l writes:
| Please make changes to the following inventory:
* Change {4 to 1} Part Black 48729b Bar 1L with Clip Mechanical Claw, Cut Edges and Hole on Side (Extra)
* Change {4 to 3} Part Blue 4274 Technic, Pin 1/2 (Extra)
* Change {6 to 4} Part Black 2780 Technic, Pin with Friction Ridges Lengthwise, Staggered, with or without Center Slots (Extra)
Comments from Submitter:
Checked in 2 different sets!
|
Please see the guideline about extra parts here:
https://www.bricklink.com/help.asp?helpID=1562
"Removing or Changing Extra Items - Extra parts can vary depending on
when and where a set was manufactured, meaning that some new sets may include
them and others may not. The quantity of these extra parts can also vary. Extra
parts are typically not removed or reduced in quantity unless it can be determined
that they were originally added or increased in error."
The 4
and the 6
can be seen here:
https://youtu.be/5c6xoochiOI?t=770
So their quantities will not be changed.
I will have a look at
later.
|
|
Author: | Turez | Posted: | May 8, 2021 06:18 | Subject: | Re: Inventory Change Request for Set 1083-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 2 Part 6232 Red Brick, Modified 2 x 2 with Pin and Axle Hole
* Add 2 Part 4730 Red Brick, Modified 2 x 2 with Pin and No Axle Hole
|
|
You know box images are not a reliable source.
But here I think we can be certain that this type
did not yet exist at that time.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|