Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | Ellum  | | Posted: | May 10, 2021 15:45 | | Subject: | Re: Inventory Change Request for Set 3683-1 | | Viewed: | 28 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| | In Inventories Requests, Ellum writes:
| | In Inventories Requests, cerrutinino writes:
| | Please make changes to the following inventory:
* Add 2 Part 3003 Blue Brick 2 x 2
Comments from Submitter:
From the original notice
|
I have this set with building instruction, but nowhere are the 2 part 3003 blue
brick 2 x 2 mentioned in the instruction. Maybe original submitter has mistaken
the set? I would say only a sealed set could confirm their presence in this set.
|
http://www.peeron.com/scans/3683-1/8/
|
Well not in mine. Does this mean they are considered as alternate parts? Note
that they are not mentioned in the instruction text in yours.
|
|
 |
| Author: | IceWorm | | Posted: | May 10, 2021 15:44 | | Subject: | Re: Some Marbled Finds | | Viewed: | 52 times | | Topic: | Colors | |
|
| | Here's a technic piece that has a "short shot" (is it?) |
|
| Author: | gtongue | | Posted: | May 10, 2021 15:40 | | Subject: | Inventory Change Request for Set 354-1 | | Viewed: | 40 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 3002old Blue Brick 2 x 3 without Cross Supports (Alternate)
* Add 9 Part 3001old Blue Brick 2 x 4 without Cross Supports (Alternate)
Comments from Submitter:
Instructions step 9 top of tower is 2x3002old + 3x3001old not 6x3002old as listed in current inventory. My version is dated 1974 and instructions are numbered 97283
|
|
| Author: | Turez | | Posted: | May 10, 2021 15:27 | | Subject: | Re: Inventory Change Request for Set 3683-1 | | Viewed: | 27 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Ellum writes:
| | In Inventories Requests, cerrutinino writes:
| | Please make changes to the following inventory:
* Add 2 Part 3003 Blue Brick 2 x 2
Comments from Submitter:
From the original notice
|
I have this set with building instruction, but nowhere are the 2 part 3003 blue
brick 2 x 2 mentioned in the instruction. Maybe original submitter has mistaken
the set? I would say only a sealed set could confirm their presence in this set.
|
http://www.peeron.com/scans/3683-1/8/
|
|
| Author: | Stellar | | Posted: | May 10, 2021 15:25 | | Subject: | Inventory Change Request for Set 45005-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig 47205pb014a Duplo Figure Lego Ville, Child Boy, Medium Blue Legs, Blue Top with 'SKATE' Text Pattern, Lime Cap, Oval Eyes (Alternate) (match ID 3)
* Add 1 Minifig 47205pb016a Duplo Figure Lego Ville, Child Girl, Magenta Legs, White Top with Flowers, Reddish Brown Hair with Braids, Oval Eyes (Alternate) (match ID 4)
* Add 1 Minifig 47394pb197a Duplo Figure Lego Ville, Female, Magenta Legs, White Sweater with Blue Flowers Pattern, Tan Ponytail Hair, Blue Eyes, Oval Eyes (Alternate) (match ID 5)
* Add 1 Minifig 47394pb159a Duplo Figure Lego Ville, Male, Tan Legs, Medium Blue Shirt with Pocket and 4 Buttons, Black Hair, Oval Eyes (Alternate) (match ID 6)
* Change 1 Minifig 47205pb014 Duplo Figure Lego Ville, Child Boy, Medium Blue Legs, Blue Top with 'SKATE' Text Pattern, Lime Cap {match ID 0 to 3}
* Change 1 Minifig 47205pb016 Duplo Figure Lego Ville, Child Girl, Magenta Legs, White Top with Flowers, Reddish Brown Hair with Braids {match ID 0 to 4}
* Change 1 Minifig 47394pb197 Duplo Figure Lego Ville, Female, Magenta Legs, White Sweater with Blue Flowers Pattern, Tan Ponytail Hair, Blue Eyes {match ID 0 to 5}
* Change 1 Minifig 47394pb159 Duplo Figure Lego Ville, Male, Tan Legs, Medium Blue Shirt with Pocket and 4 Buttons, Black Hair {match ID 0 to 6}
Comments from Submitter:
Sealed set
|
|
| Author: | Ellum | | Posted: | May 10, 2021 15:22 | | Subject: | Re: Inventory Change Request for Set 3683-1 | | Viewed: | 26 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, cerrutinino writes:
| | Please make changes to the following inventory:
* Add 2 Part 3003 Blue Brick 2 x 2
Comments from Submitter:
From the original notice
|
I have this set with building instruction, but nowhere are the 2 part 3003 blue
brick 2 x 2 mentioned in the instruction. Maybe original submitter has mistaken
the set? I would say only a sealed set could confirm their presence in this set.
|
|
|
| Author: | spacecaptain | | Posted: | May 10, 2021 14:43 | | Subject: | Re: Adding your own weight | | Viewed: | 18 times | | Topic: | Inventories | |
|
| In Inventories, wildchicken13 writes:
| | In Inventories, spacecaptain writes:
| | In Inventories, BrickenbergNC writes:
| | In Inventories, spacecaptain writes:
| | Hello. Can you add a weight to items that don't have one listed? In this
instance the 71028 set. Just so it will get the buyer a shipping cost instantly.
Thank you!
|
Click this link on any item when viewing in your inventory.
|
Thank you for the quick response! I went there first as i've seen that mentioned
here before. I didn't see an option for weight then and I am still missing
it now. Is there another link on the edit more page i am missing?
|
There is a setting that you may need to enable. Go to your store settings under
the management tab and make sure that this box is checked.
|
Thank you! That was it! It's showing up now! Have a great week and thanks
for the help!
|
|
| Author: | wildchicken13 | | Posted: | May 10, 2021 14:41 | | Subject: | Re: Adding your own weight | | Viewed: | 24 times | | Topic: | Inventories | |
|
| In Inventories, spacecaptain writes:
| | In Inventories, BrickenbergNC writes:
| | In Inventories, spacecaptain writes:
| | Hello. Can you add a weight to items that don't have one listed? In this
instance the 71028 set. Just so it will get the buyer a shipping cost instantly.
Thank you!
|
Click this link on any item when viewing in your inventory.
|
Thank you for the quick response! I went there first as i've seen that mentioned
here before. I didn't see an option for weight then and I am still missing
it now. Is there another link on the edit more page i am missing?
|
There is a setting that you may need to enable. Go to your store settings under
the management tab and make sure that this box is checked.
|
|
|
| Author: | BrickenbergNC | | Posted: | May 10, 2021 14:40 | | Subject: | Re: Adding your own weight | | Viewed: | 19 times | | Topic: | Inventories | |
|
| In Inventories, spacecaptain writes:
| | In Inventories, BrickenbergNC writes:
| | In Inventories, spacecaptain writes:
| | Hello. Can you add a weight to items that don't have one listed? In this
instance the 71028 set. Just so it will get the buyer a shipping cost instantly.
Thank you!
|
Click this link on any item when viewing in your inventory.
|
Thank you for the quick response! I went there first as i've seen that mentioned
here before. I didn't see an option for weight then and I am still missing
it now. Is there another link on the edit more page i am missing?
|
|
|
|
| Author: | spacecaptain | | Posted: | May 10, 2021 14:37 | | Subject: | Re: Adding your own weight | | Viewed: | 21 times | | Topic: | Inventories | |
|
| In Inventories, BrickenbergNC writes:
| | In Inventories, spacecaptain writes:
| | Hello. Can you add a weight to items that don't have one listed? In this
instance the 71028 set. Just so it will get the buyer a shipping cost instantly.
Thank you!
|
Click this link on any item when viewing in your inventory.
|
Thank you for the quick response! I went there first as i've seen that mentioned
here before. I didn't see an option for weight then and I am still missing
it now. Is there another link on the edit more page i am missing?
|
|
| Author: | BrickenbergNC | | Posted: | May 10, 2021 14:20 | | Subject: | Re: Adding your own weight | | Viewed: | 33 times | | Topic: | Inventories | |
|
| In Inventories, spacecaptain writes:
| | Hello. Can you add a weight to items that don't have one listed? In this
instance the 71028 set. Just so it will get the buyer a shipping cost instantly.
Thank you!
|
Click this link on any item when viewing in your inventory.
|
|
| Author: | spacecaptain | | Posted: | May 10, 2021 14:18 | | Subject: | Adding your own weight | | Viewed: | 54 times | | Topic: | Inventories | | Status: | Open | |
|
| Hello. Can you add a weight to items that don't have one listed? In this
instance the 71028 set. Just so it will get the buyer a shipping cost instantly.
Thank you!
|
|
| Author: | axaday | | Posted: | May 10, 2021 13:41 | | Subject: | Re: Kraata Color Specificity | | Viewed: | 43 times | | Topic: | Suggestions | |
|
| In Suggestions, ProneToDrift writes:
| | Bringing this back, since the issue is coming up frequently for me again.
Dear BrickLink admin folks,
It would be greatly appreciated if a different system for listing Kraata (and/or
other dual color molded parts) could be implemented. BIOSector has detailed descriptions
of each Kraata color pairing, which in theory should make it easy to create a
drop down menu based on the head and tail colors.
As an example:
Say I have a stage 1 Kraata that has a metallic green head. I select “Stage 1”,
then “Head Color: Metallic Green/Lemon Metallic.” (Listing the most common name
for the color and then the official LEGO name for that color). Then I click “Tail
Color:” and am presented with a short drop-down list of possible tail colors,
which in this instance are “Lime/Bright Yellowish-Green”, “Dark Green”, “Metallic
Blue/Sand Blue Metallic”, “Red/Bright Red”, and “Dark Grey Metallic”. (These
are the only 5 tail colors that are paired with a metallic green head.)
The final listing title would look like this:
“Stage 1 Kraata: Lemon Metallic Head, Bright Yellowish Green Tail”
Implementing a system like this would ensure that sellers clearly disclose both
colors of the item before posting, rather than being able to list only the stage
and head color and ignore the instruction to “describe the rest.” Many Kraata
listings do not describe the rest of the item; in fact, many of them leave the
description blank, making their listing functionally worthless. Unless I contact
each and every one of those sellers to ask about their one specific item, there
is no way for me to know if it is an item I am interested in.
As a result, a great many items that people have listed in hopes of selling get
passed over and ignored, due primarily to seller error, but it would be really
helpful to us collectors and customers to be able to get a clear and standardized
system in place to help us make informed purchases.
Thank you for reading!
- ProneToDrift
|
I have 18 stage 1 Kraata with different tail colors pending. If the admins accept
them I will do the other stages.
|
|
| Author: | axaday | | Posted: | May 10, 2021 13:30 | | Subject: | Re: Kraata Color Specificity | | Viewed: | 36 times | | Topic: | Suggestions | |
|
| In Suggestions, Stellar writes:
| | In Suggestions, axaday writes:
| | In Suggestions, joesecc writes:
| | As I understand it there are 42 color variations for each of the 6 different
kraata stages, which would mean adding 252 items to the catalog.
|
That does sound like lot.
|
But there is no need for 252 catalog items, probably as there are different base
colors a lot can be under the same entry in different color...?
|
Oh indeed. Looks like only 12 colors of tails. 72 listings.
It is a lot. But it is definitely the way we do things for new listings now.
|
|
| Author: | 1977_mauro | | Posted: | May 10, 2021 13:26 | | Subject: | Inventory Change Request for Set 9580-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 4485b Lime Minifigure, Headgear Cap - Short Curved Bill (Alternate) (match ID 1)
* Change 1 Part Lime 4485 Minifigure, Headgear Cap - Long Flat Bill {match ID 0 to 1}
Comments from Submitter:
Parted out 4 sealed sets, all had the short cap inside.
|
| Author: | axaday | | Posted: | May 10, 2021 13:20 | | Subject: | Re: Kraata Color Specificity | | Viewed: | 34 times | | Topic: | Suggestions | |
|
| In Suggestions, Turez writes:
Can you tell me what reddish gold and light gray metallic are?
|
| Author: | Stellar | | Posted: | May 10, 2021 12:34 | | Subject: | Re: Kraata Color Specificity | | Viewed: | 38 times | | Topic: | Suggestions | |
|
| In Suggestions, axaday writes:
| | In Suggestions, joesecc writes:
| | As I understand it there are 42 color variations for each of the 6 different
kraata stages, which would mean adding 252 items to the catalog.
|
That does sound like lot.
|
But there is no need for 252 catalog items, probably as there are different base
colors a lot can be under the same entry in different color...?
|
|
|
| Author: | Stellar | | Posted: | May 10, 2021 12:18 | | Subject: | Re: Inventory Change Request for Set 45005-1 | | Viewed: | 9 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Stellar writes:
| | In Inventories Requests, Stellar writes:
| | Please make changes to the following inventory:
* Add 1 Minifig 47205pb026a Duplo Figure Lego Ville, Child Boy, Blue Legs, Light Bluish Gray Top with Number 8, Medium Blue Arms, Red Cap, Freckles, Oval Eyes (Alternate) (match ID 1)
* Add 1 Minifig 47205pb028a Duplo Figure Lego Ville, Child Girl, Magenta Legs, Bright Pink Top with Flowers, White Arms, Tan Hair with Braids, Oval Eyes (Alternate) (match ID 2)
* Change 1 Minifig 47205pb026 Duplo Figure Lego Ville, Child Boy, Blue Legs, Light Bluish Gray Top with Number 8, Medium Blue Arms, Red Cap, Freckles {match ID 0 to 1}
* Change 1 Minifig 47205pb028 Duplo Figure Lego Ville, Child Girl, Magenta Legs, Bright Pink Top with Flowers, White Arms, Tan Hair with Braids {match ID 0 to 2}
|
I also have these 3 that I think are not in the catalog and should be added with
an a at the ID from these, right?
* | | 47205pb014 Duplo Figure Lego Ville, Child Boy, Medium Blue Legs, Blue Top with 'SKATE' Text Pattern, Lime Cap
Minifigures: DUPLO |
|
And this one that I forgot for a moment:
* | | 47205pb016 Duplo Figure Lego Ville, Child Girl, Magenta Legs, White Top with Flowers, Reddish Brown Hair with Braids
Minifigures: DUPLO |
|
|
|
| Author: | axaday | | Posted: | May 10, 2021 12:16 | | Subject: | Re: Kraata Color Specificity | | Viewed: | 37 times | | Topic: | Suggestions | |
|
| In Suggestions, joesecc writes:
| | As I understand it there are 42 color variations for each of the 6 different
kraata stages, which would mean adding 252 items to the catalog.
|
That does sound like lot.
|
|
| Author: | Stellar | | Posted: | May 10, 2021 12:15 | | Subject: | Re: Inventory Change Request for Set 45005-1 | | Viewed: | 13 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Stellar writes:
| | Please make changes to the following inventory:
* Add 1 Minifig 47205pb026a Duplo Figure Lego Ville, Child Boy, Blue Legs, Light Bluish Gray Top with Number 8, Medium Blue Arms, Red Cap, Freckles, Oval Eyes (Alternate) (match ID 1)
* Add 1 Minifig 47205pb028a Duplo Figure Lego Ville, Child Girl, Magenta Legs, Bright Pink Top with Flowers, White Arms, Tan Hair with Braids, Oval Eyes (Alternate) (match ID 2)
* Change 1 Minifig 47205pb026 Duplo Figure Lego Ville, Child Boy, Blue Legs, Light Bluish Gray Top with Number 8, Medium Blue Arms, Red Cap, Freckles {match ID 0 to 1}
* Change 1 Minifig 47205pb028 Duplo Figure Lego Ville, Child Girl, Magenta Legs, Bright Pink Top with Flowers, White Arms, Tan Hair with Braids {match ID 0 to 2}
|
I also have these 3 that I think are not in the catalog and should be added with
an a at the ID from these, right?
* | | 47205pb014 Duplo Figure Lego Ville, Child Boy, Medium Blue Legs, Blue Top with 'SKATE' Text Pattern, Lime Cap
Minifigures: DUPLO |
|
|
|
| Author: | Stellar | | Posted: | May 10, 2021 12:11 | | Subject: | Inventory Change Request for Set 45005-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig 47205pb026a Duplo Figure Lego Ville, Child Boy, Blue Legs, Light Bluish Gray Top with Number 8, Medium Blue Arms, Red Cap, Freckles, Oval Eyes (Alternate) (match ID 1)
* Add 1 Minifig 47205pb028a Duplo Figure Lego Ville, Child Girl, Magenta Legs, Bright Pink Top with Flowers, White Arms, Tan Hair with Braids, Oval Eyes (Alternate) (match ID 2)
* Change 1 Minifig 47205pb026 Duplo Figure Lego Ville, Child Boy, Blue Legs, Light Bluish Gray Top with Number 8, Medium Blue Arms, Red Cap, Freckles {match ID 0 to 1}
* Change 1 Minifig 47205pb028 Duplo Figure Lego Ville, Child Girl, Magenta Legs, Bright Pink Top with Flowers, White Arms, Tan Hair with Braids {match ID 0 to 2}
|
|
| Author: | joesecc | | Posted: | May 10, 2021 11:44 | | Subject: | Re: Kraata Color Specificity | | Viewed: | 43 times | | Topic: | Suggestions | |
|
| In Suggestions, axaday writes:
| | I have no idea what a kraata is, but are they random packed in sets? Sounds
like there aren't a lot of variations. So why don't we just add all
the variations to the catalog and make them alternates in sets?
|
As I understand it there are 42 color variations for each of the 6 different
kraata stages, which would mean adding 252 items to the catalog.
| | In Suggestions, ProneToDrift writes:
| | Bringing this back, since the issue is coming up frequently for me again.
Dear BrickLink admin folks,
It would be greatly appreciated if a different system for listing Kraata (and/or
other dual color molded parts) could be implemented. BIOSector has detailed descriptions
of each Kraata color pairing, which in theory should make it easy to create a
drop down menu based on the head and tail colors.
As an example:
Say I have a stage 1 Kraata that has a metallic green head. I select “Stage 1”,
then “Head Color: Metallic Green/Lemon Metallic.” (Listing the most common name
for the color and then the official LEGO name for that color). Then I click “Tail
Color:” and am presented with a short drop-down list of possible tail colors,
which in this instance are “Lime/Bright Yellowish-Green”, “Dark Green”, “Metallic
Blue/Sand Blue Metallic”, “Red/Bright Red”, and “Dark Grey Metallic”. (These
are the only 5 tail colors that are paired with a metallic green head.)
The final listing title would look like this:
“Stage 1 Kraata: Lemon Metallic Head, Bright Yellowish Green Tail”
Implementing a system like this would ensure that sellers clearly disclose both
colors of the item before posting, rather than being able to list only the stage
and head color and ignore the instruction to “describe the rest.” Many Kraata
listings do not describe the rest of the item; in fact, many of them leave the
description blank, making their listing functionally worthless. Unless I contact
each and every one of those sellers to ask about their one specific item, there
is no way for me to know if it is an item I am interested in.
As a result, a great many items that people have listed in hopes of selling get
passed over and ignored, due primarily to seller error, but it would be really
helpful to us collectors and customers to be able to get a clear and standardized
system in place to help us make informed purchases.
Thank you for reading!
- ProneToDrift
|
|
|
|
| Author: | axaday | | Posted: | May 10, 2021 11:33 | | Subject: | Re: Kraata Color Specificity | | Viewed: | 41 times | | Topic: | Suggestions | |
|
| I have no idea what a kraata is, but are they random packed in sets? Sounds
like there aren't a lot of variations. So why don't we just add all
the variations to the catalog and make them alternates in sets?
In Suggestions, ProneToDrift writes:
| | Bringing this back, since the issue is coming up frequently for me again.
Dear BrickLink admin folks,
It would be greatly appreciated if a different system for listing Kraata (and/or
other dual color molded parts) could be implemented. BIOSector has detailed descriptions
of each Kraata color pairing, which in theory should make it easy to create a
drop down menu based on the head and tail colors.
As an example:
Say I have a stage 1 Kraata that has a metallic green head. I select “Stage 1”,
then “Head Color: Metallic Green/Lemon Metallic.” (Listing the most common name
for the color and then the official LEGO name for that color). Then I click “Tail
Color:” and am presented with a short drop-down list of possible tail colors,
which in this instance are “Lime/Bright Yellowish-Green”, “Dark Green”, “Metallic
Blue/Sand Blue Metallic”, “Red/Bright Red”, and “Dark Grey Metallic”. (These
are the only 5 tail colors that are paired with a metallic green head.)
The final listing title would look like this:
“Stage 1 Kraata: Lemon Metallic Head, Bright Yellowish Green Tail”
Implementing a system like this would ensure that sellers clearly disclose both
colors of the item before posting, rather than being able to list only the stage
and head color and ignore the instruction to “describe the rest.” Many Kraata
listings do not describe the rest of the item; in fact, many of them leave the
description blank, making their listing functionally worthless. Unless I contact
each and every one of those sellers to ask about their one specific item, there
is no way for me to know if it is an item I am interested in.
As a result, a great many items that people have listed in hopes of selling get
passed over and ignored, due primarily to seller error, but it would be really
helpful to us collectors and customers to be able to get a clear and standardized
system in place to help us make informed purchases.
Thank you for reading!
- ProneToDrift
|
|
|
| Author: | bricks2smiles | | Posted: | May 10, 2021 10:17 | | Subject: | Inventory Change Request for Set 41345-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3004pb233 Orange Brick 1 x 2 with Paw Print, Hamster and Food Bowl Pattern (Sticker) - Set 41345 (Alternate)
* Add 1 Part 2454pb188 White Brick 1 x 2 x 5 with Shelf, Perfume, Flowers, Mirror, Rabbit and Cat Pictures Pattern (Sticker) - Set 41345 (Alternate)
* Add 1 Part 46212pb022 Trans-Light Blue Brick 1 x 2 x 5 without Side Supports with Bubbles, Coral, Fish and Seaweed Pattern (Sticker) - Set 41345 (Alternate)
* Add 1 Part 87552pb078 Trans-Light Blue Panel 1 x 2 x 2 with Side Supports - Hollow Studs with Bubbles, Fish, Anchor and Treasure Chest Pattern (Sticker) - Set 41345 (Alternate)
* Add 1 Part 87552pb079 Trans-Light Blue Panel 1 x 2 x 2 with Side Supports - Hollow Studs with Bubbles, Fish, Castle and Seaweed Pattern (Sticker) - Set 41345 (Alternate)
* Add 1 Part 60616pb063 Trans-Clear Door 1 x 4 x 6 with Stud Handle with 'Open' on Medium Azure Bone Shaped Sign Pattern (Sticker) - Set 41345 (Alternate)
* Add 1 Part 98393bpb07 Light Aqua Friends Accessories Medical Clipboard with Rabbit, Hearts, Eye and Paw Print Pattern (Sticker) - Set 41345 (Alternate)
* Add 1 Part 85984pb317 Light Aqua Slope 30 1 x 2 x 2/3 with Medium Azure Weighing Scales Gauge Pattern (Sticker) - Set 41345 (Alternate)
* Add 1 Part 30261pb045 White Road Sign 2 x 2 Round with Clip with '50%' on Bright Light Orange Starburst Pattern (Sticker) - Set 41345 (Alternate)
* Add 1 Part 15210pb098 White Road Sign 2 x 2 Square with Open O Clip with 2 Windows with Fish, Dog, Calendar and Mouse Cursor on Computer Screen Pattern (Sticker) - Set 41345 (Alternate)
* Add 1 Part 3068bpb1650 Dark Pink Tile 2 x 2 with Groove with White Dog in Sunglasses Holding Cocktail with Umbrella Pattern (Sticker) - Set 41345 (Alternate)
* Add 1 Part 11203pb066 Tan Tile, Modified 2 x 2 Inverted with White Paw Print with Dark Purple Border on Tan Background Pattern (Sticker) - Set 41345 (Alternate)
|
|
| Author: | zaskar | | Posted: | May 10, 2021 09:58 | | Subject: | Inventory Change Request for Set 7097-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 59232 Flat Silver Minifigure, Weapon Spiked Flail / Mace (Alternate) (match ID 7)
* Add 4 Part 60752 Flat Silver Minifigure, Weapon Sword, Scimitar with Nicks (Alternate) (match ID 8)
* Change 1 Part Pearl Light Gray 59232 Minifigure, Weapon Spiked Flail / Mace {match ID 0 to 7}
* Change 4 Part Pearl Light Gray 60752 Minifigure, Weapon Sword, Scimitar with Nicks {match ID 0 to 8}
Comments from Submitter:
These parts came in flat silver in the two sets that I parted out.
|
|
| Author: | zaskar | | Posted: | May 10, 2021 08:54 | | Subject: | Inventory Change Request for Set 7097-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Dark Bluish Gray {3684 Slope 75 2 x 2 x 3 (Undetermined Stud Type) to 3684a Slope 75 2 x 2 x 3 - Hollow Studs}
Comments from Submitter:
Verified in two parted out sets.
|
|
| Author: | Turez | | Posted: | May 10, 2021 08:43 | | Subject: | Re: Inventory Change Request for Set 5956-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, samsam2 writes:
| | Please make changes to the following inventory:
* Add 1 Part 5956stk01 (Not Applicable) Sticker Sheet for Set 5956 - Sheet 1 (72573/4116669) (Extra)
Comments from Submitter:
Just2Good unboxing sealed set
|
I don't think we should add that extra sticker sheet. TLG very rarely provides
an extra sticker sheet and as Yorbrick already pointed out, the two sheets stick
together so it looks like a packing error. I have found the same in a new set
a few months ago. I will leave this open for a while in case anyone wants to
add anything here.
| | Another question, should the zeppelin ship be split into 2 parts, since it is
assembled only for display purposes?
|
Don't really have an opinion here. But we already have 171 parts in the inventory
while the box says there should be 170. So I would say it is okay for now to
not add another one. 
|
|
| Author: | Turez | | Posted: | May 10, 2021 07:57 | | Subject: | Re: Inventory Change Request for Set 6557-1 | | Viewed: | 27 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, jd5775 writes:
| | Please make changes to the following inventory:
* Add 1 Part 2412a Blue Tile, Modified 1 x 2 Grille without Bottom Groove / Lip (Alternate) (match ID 1)
* Add 1 Part 2412a Red Tile, Modified 1 x 2 Grille without Bottom Groove / Lip (Alternate) (match ID 2)
* Change 1 Part Blue 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip {match ID 0 to 1}
* Change 1 Part Red 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip {match ID 0 to 2}
|
Could you please let us know what your source is for making these change requests?
(I see you have this set for sale in your store, but it is still sealed. Do you
have a second copy with open box?)
|
|
| Author: | ProneToDrift | | Posted: | May 10, 2021 00:31 | | Subject: | Re: Kraata Color Specificity | | Viewed: | 43 times | | Topic: | Suggestions | |
|
| Lovely.
As a point of reference, I have no experience with coding. I wasn't advocating
for a complete site overhaul; in theory my idea is simple. If it isn't viable
in practice, a practical "that's too much work for too little gain" would
be sufficient.
In Suggestions, macebobo writes:
| | In Suggestions, ProneToDrift writes:
| | Bringing this back, since the issue is coming up frequently for me again.
Dear BrickLink admin folks,
It would be greatly appreciated if a different system for listing Kraata (and/or
other dual color molded parts) could be implemented. BIOSector has detailed descriptions
of each Kraata color pairing, which in theory should make it easy to create a
drop down menu based on the head and tail colors.
As an example:
Say I have a stage 1 Kraata that has a metallic green head. I select “Stage 1”,
then “Head Color: Metallic Green/Lemon Metallic.” (Listing the most common name
for the color and then the official LEGO name for that color). Then I click “Tail
Color:” and am presented with a short drop-down list of possible tail colors,
which in this instance are “Lime/Bright Yellowish-Green”, “Dark Green”, “Metallic
Blue/Sand Blue Metallic”, “Red/Bright Red”, and “Dark Grey Metallic”. (These
are the only 5 tail colors that are paired with a metallic green head.)
The final listing title would look like this:
“Stage 1 Kraata: Lemon Metallic Head, Bright Yellowish Green Tail”
Implementing a system like this would ensure that sellers clearly disclose both
colors of the item before posting, rather than being able to list only the stage
and head color and ignore the instruction to “describe the rest.” Many Kraata
listings do not describe the rest of the item; in fact, many of them leave the
description blank, making their listing functionally worthless. Unless I contact
each and every one of those sellers to ask about their one specific item, there
is no way for me to know if it is an item I am interested in.
As a result, a great many items that people have listed in hopes of selling get
passed over and ignored, due primarily to seller error, but it would be really
helpful to us collectors and customers to be able to get a clear and standardized
system in place to help us make informed purchases.
Thank you for reading!
- ProneToDrift
|
You've made it to the funny pages.
http://v4ei.com/comics/index.php?id=dual&check=2105s
|
|
|
| Author: | macebobo | | Posted: | May 10, 2021 00:23 | | Subject: | Re: Kraata Color Specificity | | Viewed: | 38 times | | Topic: | Suggestions | |
|
| In Suggestions, ProneToDrift writes:
| | Bringing this back, since the issue is coming up frequently for me again.
Dear BrickLink admin folks,
It would be greatly appreciated if a different system for listing Kraata (and/or
other dual color molded parts) could be implemented. BIOSector has detailed descriptions
of each Kraata color pairing, which in theory should make it easy to create a
drop down menu based on the head and tail colors.
As an example:
Say I have a stage 1 Kraata that has a metallic green head. I select “Stage 1”,
then “Head Color: Metallic Green/Lemon Metallic.” (Listing the most common name
for the color and then the official LEGO name for that color). Then I click “Tail
Color:” and am presented with a short drop-down list of possible tail colors,
which in this instance are “Lime/Bright Yellowish-Green”, “Dark Green”, “Metallic
Blue/Sand Blue Metallic”, “Red/Bright Red”, and “Dark Grey Metallic”. (These
are the only 5 tail colors that are paired with a metallic green head.)
The final listing title would look like this:
“Stage 1 Kraata: Lemon Metallic Head, Bright Yellowish Green Tail”
Implementing a system like this would ensure that sellers clearly disclose both
colors of the item before posting, rather than being able to list only the stage
and head color and ignore the instruction to “describe the rest.” Many Kraata
listings do not describe the rest of the item; in fact, many of them leave the
description blank, making their listing functionally worthless. Unless I contact
each and every one of those sellers to ask about their one specific item, there
is no way for me to know if it is an item I am interested in.
As a result, a great many items that people have listed in hopes of selling get
passed over and ignored, due primarily to seller error, but it would be really
helpful to us collectors and customers to be able to get a clear and standardized
system in place to help us make informed purchases.
Thank you for reading!
- ProneToDrift
|
You've made it to the funny pages.
http://v4ei.com/comics/index.php?id=dual&check=2105s
|
|
| Author: | jd5775 | | Posted: | May 9, 2021 19:34 | | Subject: | Inventory Change Request for Set 6557-1 | | Viewed: | 46 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 2412a Blue Tile, Modified 1 x 2 Grille without Bottom Groove / Lip (Alternate) (match ID 1)
* Add 1 Part 2412a Red Tile, Modified 1 x 2 Grille without Bottom Groove / Lip (Alternate) (match ID 2)
* Change 1 Part Blue 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip {match ID 0 to 1}
* Change 1 Part Red 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip {match ID 0 to 2}
|
| Author: | mjah5 | | Posted: | May 9, 2021 18:20 | | Subject: | Re: Dark Red Bionicle Weapon Staff of Light Blade | | Viewed: | 43 times | | Topic: | Colors | |
|
| In Colors, LifeInPlastic writes:
My bad. Sorry all.
|
|
|
| Author: | mjah5 | | Posted: | May 9, 2021 18:15 | | Subject: | Dark Red Bionicle Weapon Staff of Light Blade | | Viewed: | 88 times | | Topic: | Colors | | Status: | Open | |
|
| Hello All, I have two Item # 44813 Bionicle Weapon Staff of Light Blade. They
are neither Flat Silver nor Pearl Light Gray/Grey. I have included photos where
you can see the part number 44813 and the copyright c2002 LEGO Group. As well
on the reverse of both is the number 58813, also visible in the photos. Also
there are currently 13 sellers selling this part under the colour "Dark Red".
One seller includes a photo of the part against a green background. As you
can see the part isn't completely "Dark Red" but rather is partly semi-transparent.
I suggest we formalize this part with this colour scheme and add it to the catalog.
I make no suggestion that colour scheme should be associated with any particular
set, but clearly, it exists.
Regards
|
|
|
| Author: | InsanityBeckonz | | Posted: | May 9, 2021 15:20 | | Subject: | Inventory Change Request for Set 60167-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 62791c01pb07 White Boat, Hull Unitary 51 x 12 x 6 with Side Bulges and Dark Bluish Gray Top with Blue 'COAST GUARD' and Logo Pattern on Both Sides (Stickers) - Set 60167 (Counterpart)
|
|
| Author: | InsanityBeckonz | | Posted: | May 9, 2021 15:18 | | Subject: | Inventory Change Request for Set 60167-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 92710c04pb01 Dark Red Boat, Hull Unitary 28 x 8 with Tan Top with Red Stripe and '60167' on White Background Pattern on Both Sides (Stickers) - Set 60167 (Counterpart)
* Add 2 Part 60616pb062 Trans-Light Blue Door 1 x 4 x 6 with Stud Handle with Coast Guard Logo Pattern (Sticker) - Set 60167 (Counterpart)
* Add 1 Part 60581pb176 White Panel 1 x 4 x 3 with Side Supports - Hollow Studs with Blue 'COAST GUARD' and Logo Pattern (Sticker) - Set 60167 (Counterpart)
* Add 1 Part 87079pb925 Black Tile 2 x 4 with Coast Guard Rescue Controller and Minifigure with Life Raft on Screen Pattern (Sticker) - Set 60167 (Counterpart)
|
|
| Author: | Adjour | | Posted: | May 9, 2021 14:22 | | Subject: | Re: large collection of Modulex | | Viewed: | 78 times | | Topic: | Modulex | |
|
| In Modulex, ModulexDepot writes:
| | My grandfather left a large collection of Modulex Bricks and Tiles. Is there
a demand for Modulex bricks? Is it worth the effort to record the stock and sell
it via Bricklink? Some bricks are not listed on Bricklink and many are still
sealed in their original packaging.
|
first off, wow wow wow
Yes there is a demand for these. Especially all from one place.
That is beyond cool.
|
|
| Author: | randyf | | Posted: | May 9, 2021 12:45 | | Subject: | Re: Split Copper | | Viewed: | 73 times | | Topic: | Catalog | |
|
| This issue is already known, and it would be part of project #2 on the Catalog
Roadmap: https://www.bricklink.com/help.asp?helpID=2476
In Suggestions, WOLKsite writes:
| | At the moment, the "Copper" color covers 4 distinct major colors:
Comparison image, from DeMartinet: https://brickshelf.com/gallery/DeMartinet/Colors/img_2465.jpg
Pearl:
189 Reddish Gold (alt. named Gold Metallic) - Used most notably in Knights'
Kingdom II, but also for Krana-Kal/Kraata in BIONICLE. Like the name says, it's
a reddish gold color, somewhat similar to pearl gold. Replaced by Pearl Gold
in 2006. The minifig sword in the image.
139 Copper - Used most notably in Exo-Force. Kind of brown in color. The
2x2 dome piece in the image.
346 Copper Metallic - A much more orangish color, used between 2017 and
2020. The action figure sword in the image.
Metallic:
300 Copper, Drum Lacquered - Like 139 Copper, but "metallic". The axe-head
in the image.
Personally, I think these are distinct enough to warrent individual colors.
There's of course, the BIONICLE copper masks of victory (which use 176 Red
Flip/Flop) and golden masks (178 Yellow Flip/Flop) (also sold as Metallic Gold)
but given the very limited usage, a unique color is not needed there. Ditto for
the Pohatu/Pahrak canister lid, ofc.
|
|
|
| Author: | randyf | | Posted: | May 9, 2021 12:42 | | Subject: | Re: Kraata Color Specificity | | Viewed: | 56 times | | Topic: | Suggestions | |
|
| I don't believe the site is going to do a code rewrite for one group of parts
in a catalog that has over 125,000 items and growing. Just saying.
In Suggestions, ProneToDrift writes:
| | Bringing this back, since the issue is coming up frequently for me again.
Dear BrickLink admin folks,
It would be greatly appreciated if a different system for listing Kraata (and/or
other dual color molded parts) could be implemented. BIOSector has detailed descriptions
of each Kraata color pairing, which in theory should make it easy to create a
drop down menu based on the head and tail colors.
As an example:
Say I have a stage 1 Kraata that has a metallic green head. I select “Stage 1”,
then “Head Color: Metallic Green/Lemon Metallic.” (Listing the most common name
for the color and then the official LEGO name for that color). Then I click “Tail
Color:” and am presented with a short drop-down list of possible tail colors,
which in this instance are “Lime/Bright Yellowish-Green”, “Dark Green”, “Metallic
Blue/Sand Blue Metallic”, “Red/Bright Red”, and “Dark Grey Metallic”. (These
are the only 5 tail colors that are paired with a metallic green head.)
The final listing title would look like this:
“Stage 1 Kraata: Lemon Metallic Head, Bright Yellowish Green Tail”
Implementing a system like this would ensure that sellers clearly disclose both
colors of the item before posting, rather than being able to list only the stage
and head color and ignore the instruction to “describe the rest.” Many Kraata
listings do not describe the rest of the item; in fact, many of them leave the
description blank, making their listing functionally worthless. Unless I contact
each and every one of those sellers to ask about their one specific item, there
is no way for me to know if it is an item I am interested in.
As a result, a great many items that people have listed in hopes of selling get
passed over and ignored, due primarily to seller error, but it would be really
helpful to us collectors and customers to be able to get a clear and standardized
system in place to help us make informed purchases.
Thank you for reading!
- ProneToDrift
|
|
|
| Author: | samsam2 | | Posted: | May 9, 2021 11:56 | | Subject: | Re: Inventory Change Request for Set 5956-1 | | Viewed: | 12 times | | Topic: | Inventories Requests | |
|
| Another question, should the zeppelin ship be split into 2 parts, since it is
assembled only for display purposes?
|
| Author: | yorbrick | | Posted: | May 9, 2021 11:56 | | Subject: | Re: Inventory Change Request for Set 5956-1 | | Viewed: | 15 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, samsam2 writes:
| | Please make changes to the following inventory:
* Add 1 Part 5956stk01 (Not Applicable) Sticker Sheet for Set 5956 - Sheet 1 (72573/4116669) (Extra)
Comments from Submitter:
Just2Good unboxing sealed set
|
This could well be a mistake rather than a widespread extra. I've had two
sticker sheets in sets before when there is meant to be one. They sometimes stick
together and you get two.
|
|
| Author: | samsam2 | | Posted: | May 9, 2021 11:43 | | Subject: | Re: Inventory Change Request for Set 5956-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, samsam2 writes:
| | Please make changes to the following inventory:
* Add 1 Part 5956stk01 (Not Applicable) Sticker Sheet for Set 5956 - Sheet 1 (72573/4116669) (Extra)
Comments from Submitter:
Just2Good unboxing sealed set
|
|
|
| Author: | samsam2 | | Posted: | May 9, 2021 11:42 | | Subject: | Inventory Change Request for Set 5956-1 | | Viewed: | 34 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 5956stk01 (Not Applicable) Sticker Sheet for Set 5956 - Sheet 1 (72573/4116669) (Extra)
Comments from Submitter:
Just2Good unboxing sealed set
|
|
| Author: | ModulexDepot | | Posted: | May 9, 2021 08:01 | | Subject: | Re: large collection of Modulex | | Viewed: | 103 times | | Topic: | Modulex | |
|
| In Modulex, magicalbricks24 writes:
| | In Modulex, ModulexDepot writes:
| | My grandfather left a large collection of Modulex Bricks and Tiles. Is there
a demand for Modulex bricks? Is it worth the effort to record the stock and sell
it via Bricklink? Some bricks are not listed on Bricklink and many are still
sealed in their original packaging.
|
I’m not sure if there is much of a demand, but many MODULEX bricks sell for $1-2
USD each once you are getting larger than a 1x2 brick. For the ones that aren’t
on Bricklink, it is very easy to add an item to the catalog. If someone has not
added it already, I would guess that it is pretty rare. Most importantly, is
Bricklink something that you would want to put time into. When you have that
many parts, it would take a lot of time to sort, list, pack, and ship everything.
My recommendation is to go for it if if you want to sell. You have quite a bit
there, maybe even the most on Bricklink. One seller has nearly 6,000 MODULEX
pieces, while another has nearly 12,000 MODULEX Bricks.
-Nicholas
magicalbricks24
|
Hi Nicholas
My grandfather's collection includes much much more than 12000 bricks. He
took over the Modulex Switzerland stock when they closed down.
|
|
| Author: | yorbrick | | Posted: | May 9, 2021 07:56 | | Subject: | Re: Kraata Color Specificity | | Viewed: | 49 times | | Topic: | Suggestions | |
|
| In Suggestions, ProneToDrift writes:
| | Bringing this back, since the issue is coming up frequently for me again.
Dear BrickLink admin folks,
It would be greatly appreciated if a different system for listing Kraata (and/or
other dual color molded parts) could be implemented. BIOSector has detailed descriptions
of each Kraata color pairing, which in theory should make it easy to create a
drop down menu based on the head and tail colors.
As an example:
Say I have a stage 1 Kraata that has a metallic green head. I select “Stage 1”,
then “Head Color: Metallic Green/Lemon Metallic.” (Listing the most common name
for the color and then the official LEGO name for that color). Then I click “Tail
Color:” and am presented with a short drop-down list of possible tail colors,
which in this instance are “Lime/Bright Yellowish-Green”, “Dark Green”, “Metallic
Blue/Sand Blue Metallic”, “Red/Bright Red”, and “Dark Grey Metallic”. (These
are the only 5 tail colors that are paired with a metallic green head.)
The final listing title would look like this:
“Stage 1 Kraata: Lemon Metallic Head, Bright Yellowish Green Tail”
Implementing a system like this would ensure that sellers clearly disclose both
colors of the item before posting, rather than being able to list only the stage
and head color and ignore the instruction to “describe the rest.” Many Kraata
listings do not describe the rest of the item; in fact, many of them leave the
description blank, making their listing functionally worthless. Unless I contact
each and every one of those sellers to ask about their one specific item, there
is no way for me to know if it is an item I am interested in.
As a result, a great many items that people have listed in hopes of selling get
passed over and ignored, due primarily to seller error, but it would be really
helpful to us collectors and customers to be able to get a clear and standardized
system in place to help us make informed purchases.
|
So you think that bricklink needs a complete rewrite to allow parts to have multiple
colours per part rather than just adding these in the description? It seems unlikely
somehow.
I don't really see the issue either. To me, it looks like the vast majority
of these have the correct colour selected then either a description of the tail
colour, or a photograph of the pieces. If they don't then ask or just ignore
them.
|
|
| Author: | tec | | Posted: | May 9, 2021 06:28 | | Subject: | Re: Split Copper | | Viewed: | 60 times | | Topic: | Catalog | |
|
| For reference, my uneducated eyes, not aware of any legoid, will say:
Brass:
- light brass: small sword
- dark brass: mask
Copper:
- copper: big sword
bronze:
- bronze: mask, dome.
- freshly cast bronze: axe head
|
|
| Author: | WOLKsite | | Posted: | May 9, 2021 03:42 | | Subject: | Split Copper | | Viewed: | 150 times | | Topic: | Catalog | | Status: | Open | |
|
| At the moment, the "Copper" color covers 4 distinct major colors:
Comparison image, from DeMartinet: https://brickshelf.com/gallery/DeMartinet/Colors/img_2465.jpg
Pearl:
189 Reddish Gold (alt. named Gold Metallic) - Used most notably in Knights'
Kingdom II, but also for Krana-Kal/Kraata in BIONICLE. Like the name says, it's
a reddish gold color, somewhat similar to pearl gold. Replaced by Pearl Gold
in 2006. The minifig sword in the image.
139 Copper - Used most notably in Exo-Force. Kind of brown in color. The
2x2 dome piece in the image.
346 Copper Metallic - A much more orangish color, used between 2017 and
2020. The action figure sword in the image.
Metallic:
300 Copper, Drum Lacquered - Like 139 Copper, but "metallic". The axe-head
in the image.
Personally, I think these are distinct enough to warrent individual colors.
There's of course, the BIONICLE copper masks of victory (which use 176 Red
Flip/Flop) and golden masks (178 Yellow Flip/Flop) (also sold as Metallic Gold)
but given the very limited usage, a unique color is not needed there. Ditto for
the Pohatu/Pahrak canister lid, ofc.
|
|
| Author: | WOLKsite | | Posted: | May 9, 2021 03:27 | | Subject: | Re: Kraata Color Specificity | | Viewed: | 69 times | | Topic: | Suggestions | |
|
| In Suggestions, ProneToDrift writes:
| | It would be greatly appreciated if a different system for listing Kraata (and/or
other dual color molded parts) could be implemented. BIOSector has detailed descriptions
of each Kraata color pairing, which in theory should make it easy to create a
drop down menu based on the head and tail colors.
|
https://biosector01.com/wiki/Kraata_Powers The list, for your convenience.
To further clarify each individual color there:
Bright Red: Red
Bright Blue: Blue
Bright Yellow: Yellow
White: White
Dark Green: Green
Black: Black
Bright Orange: Orange
Medium Blue: Medium Blue
Brick Yellow: Tan
Grey: Light Gray
Bright Yellowish Green: Lime
Dark Grey: Dark Gray
Reddish Gold: Copper (Like in Knight's Kingdom II, not Exo-Force
or the 2017-2020 one)
Sand Blue Metallic: Metal Blue
Sand Yellow Metallic: Flat Dark Gold
Light Grey Metallic: Pearl Very Light Gray
Lemon Metallic: (Pearl) Metallic Green
Dark Grey Metallic: (Old) Pearl Dark Grey
|
|
| Author: | ProneToDrift | | Posted: | May 9, 2021 03:19 | | Subject: | Kraata Color Specificity | | Viewed: | 71 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Bringing this back, since the issue is coming up frequently for me again.
Dear BrickLink admin folks,
It would be greatly appreciated if a different system for listing Kraata (and/or
other dual color molded parts) could be implemented. BIOSector has detailed descriptions
of each Kraata color pairing, which in theory should make it easy to create a
drop down menu based on the head and tail colors.
As an example:
Say I have a stage 1 Kraata that has a metallic green head. I select “Stage 1”,
then “Head Color: Metallic Green/Lemon Metallic.” (Listing the most common name
for the color and then the official LEGO name for that color). Then I click “Tail
Color:” and am presented with a short drop-down list of possible tail colors,
which in this instance are “Lime/Bright Yellowish-Green”, “Dark Green”, “Metallic
Blue/Sand Blue Metallic”, “Red/Bright Red”, and “Dark Grey Metallic”. (These
are the only 5 tail colors that are paired with a metallic green head.)
The final listing title would look like this:
“Stage 1 Kraata: Lemon Metallic Head, Bright Yellowish Green Tail”
Implementing a system like this would ensure that sellers clearly disclose both
colors of the item before posting, rather than being able to list only the stage
and head color and ignore the instruction to “describe the rest.” Many Kraata
listings do not describe the rest of the item; in fact, many of them leave the
description blank, making their listing functionally worthless. Unless I contact
each and every one of those sellers to ask about their one specific item, there
is no way for me to know if it is an item I am interested in.
As a result, a great many items that people have listed in hopes of selling get
passed over and ignored, due primarily to seller error, but it would be really
helpful to us collectors and customers to be able to get a clear and standardized
system in place to help us make informed purchases.
Thank you for reading!
- ProneToDrift
|
|
|
| Author: | ProneToDrift | | Posted: | May 9, 2021 03:16 | | Subject: | Kraata Color Specificity | | Viewed: | 159 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Bringing this back, since the issue is coming up frequently for me again.
Dear BrickLink admin folks,
It would be greatly appreciated if a different system for listing Kraata (and/or
other dual color molded parts) could be implemented. BIOSector has detailed descriptions
of each Kraata color pairing, which in theory should make it easy to create a
drop down menu based on the head and tail colors.
As an example:
Say I have a stage 1 Kraata that has a metallic green head. I select “Stage 1”,
then “Head Color: Metallic Green/Lemon Metallic.” (Listing the most common name
for the color and then the official LEGO name for that color). Then I click “Tail
Color:” and am presented with a short drop-down list of possible tail colors,
which in this instance are “Lime/Bright Yellowish-Green”, “Dark Green”, “Metallic
Blue/Sand Blue Metallic”, “Red/Bright Red”, and “Dark Grey Metallic”. (These
are the only 5 tail colors that are paired with a metallic green head.)
The final listing title would look like this:
“Stage 1 Kraata: Lemon Metallic Head, Bright Yellowish Green Tail”
Implementing a system like this would ensure that sellers clearly disclose both
colors of the item before posting, rather than being able to list only the stage
and head color and ignore the instruction to “describe the rest.” Many Kraata
listings do not describe the rest of the item; in fact, many of them leave the
description blank, making their listing functionally worthless. Unless I contact
each and every one of those sellers to ask about their one specific item, there
is no way for me to know if it is an item I am interested in.
As a result, a great many items that people have listed in hopes of selling get
passed over and ignored, due primarily to seller error, but it would be really
helpful to us collectors and customers to be able to get a clear and standardized
system in place to help us make informed purchases.
Thank you for reading!
- ProneToDrift
|
|
|
| Author: | Roxyncz | | Posted: | May 9, 2021 02:50 | | Subject: | Inventory Change Request for Set 76383-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3068bpb1673 Bright Light Orange Tile 2 x 2 with Groove with Black Cauldron Pattern (Sticker) - Set 76383 (Counterpart)
* Add 1 Part 57895pb081 Dark Bluish Gray Glass for Window 1 x 4 x 6 with Wooden Shelves, Bottles and Jars Pattern (Sticker) - Set 76383 (Counterpart)
* Add 1 Part 87421pb055 Reddish Brown Panel 3 x 3 x 6 Corner Wall without Bottom Indentations with Wooden Shelves, Bottles and Jars Pattern (Sticker) - Set 76383 (Counterpart)
* Add 1 Part 69934pb007 Sand Green Tile, Modified 10 x 16 with Studs on Edges and Bar Handles with Drainpipe, Brick Wall and Wizard Portrait Pattern (Sticker) - Set 76383 (Counterpart)
* Add 1 Part 60581pb179 Light Bluish Gray Panel 1 x 4 x 3 with Side Supports - Hollow Studs with Wooden Shelves, Bottles, Feather and Potions Pattern on Inside (Sticker) - Set 76383 (Counterpart)
* Add 1 Part 14718pb042 Black Panel 1 x 4 x 2 with Side Supports - Hollow Studs with Plus, Question Mark, Equals, Plant and Flower on Blackboard Pattern (Sticker) - Set 76383 (Counterpart)
* Add 1 Part 65066pb04 Dark Bluish Gray Glass for Door Frame 1 x 6 x 7 Rounded Pillars with Top Arch and Notches with Brick Wall, Lattice Windows and Black 'potassa carbonate' Pattern (Sticker) - Set 76383 (Counterpart)
* Add 1 Part 69934pb008 Sand Green Tile, Modified 10 x 16 with Studs on Edges and Bar Handles with Hogwarts Potions Class with Black 'TOM RIDDLE', Books, 'Potions', Wooden Shelf, Portrait, Cobwebs and Flag of Slytherin (Counterpart)
|
|
| Author: | Roxyncz | | Posted: | May 9, 2021 02:36 | | Subject: | Inventory Change Request for Set 76385-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 63864pb164 Light Bluish Gray Tile 1 x 3 with Black Lines and Scrollwork Pattern (Sticker) - Set 76385 (Counterpart)
* Add 1 Part 3068bpb1671 Bright Light Orange Tile 2 x 2 with Groove with Magic Wand and Feather Pattern (Sticker) - Set 76385 (Counterpart)
* Add 1 Part 87552pb076 Reddish Brown Panel 1 x 2 x 2 with Side Supports - Hollow Studs with Blue and Dark Tan Books Pattern (Sticker) - Set 76385 (Counterpart)
* Add 1 Part 57895pb080 Trans-Clear Glass for Window 1 x 4 x 6 with Wooden Frame and Lattice on Bright Light Blue Background Pattern (Sticker) - Set 76385 (Counterpart)
* Add 1 Part 87552pb077 Reddish Brown Panel 1 x 2 x 2 with Side Supports - Hollow Studs with Dark Blue, Dark Tan and Reddish Brown Books Pattern (Sticker) - Set 76385 (Counterpart)
* Add 1 Part 60581pb178 Black Panel 1 x 4 x 3 with Side Supports - Hollow Studs with White Magic Wand, Feather and Writing on Blackboard Pattern on Inside (Sticker) - Set 76385 (Counterpart)
* Add 1 Part 87552pb074 Reddish Brown Panel 1 x 2 x 2 with Side Supports - Hollow Studs with Wooden Shelf with Dark Blue, Reddish Brown and White Books Pattern on Inside (Sticker) - Set 76385 (Counterpart)
* Add 1 Part 87552pb075 Reddish Brown Panel 1 x 2 x 2 with Side Supports - Hollow Studs with Wooden Shelf with Dark Blue, Dark Tan, Reddish Brown and White Books Pattern on Inside (Sticker) - Set 76385 (Counterpart)
* Add 1 Part 14718pb040 Tan Panel 1 x 4 x 2 with Side Supports - Hollow Studs with Wooden Shelf with 11 Dark Blue, Dark Tan, Reddish Brown and White Books Pattern on Inside (Sticker) - Set 76385 (Counterpart)
* Add 1 Part 14718pb041 Tan Panel 1 x 4 x 2 with Side Supports - Hollow Studs with Wooden Shelf with 12 Dark Blue, Dark Tan, Reddish Brown and White Books Pattern on Inside (Sticker) - Set 76385 (Counterpart)
* Add 1 Part 69934pb006 Sand Blue Tile, Modified 10 x 16 with Studs on Edges and Bar Handles with Ravenclaw Flag, Spells and Latin Words on Reddish Brown Background Pattern on Inside (Sticker) - Set 76385 (Counterpart)
* Add 1 Part 69934pb005 Sand Blue Tile, Modified 10 x 16 with Studs on Edges and Bar Handles with Hogwarts Charms Class and Spells and Latin Words on Reddish Brown Background Pattern on Inside (Sticker) - Set 76385 (Counterpart)
|
|
| Author: | goldknight | | Posted: | May 9, 2021 00:56 | | Subject: | Re: large collection of Modulex | | Viewed: | 95 times | | Topic: | Modulex | |
|
| In Modulex, ModulexDepot writes:
| | My grandfather left a large collection of Modulex Bricks and Tiles. Is there
a demand for Modulex bricks? Is it worth the effort to record the stock and sell
it via Bricklink? Some bricks are not listed on Bricklink and many are still
sealed in their original packaging.
|
I am interested in the whole lot!!! I will message you
|
|
| Author: | axaday | | Posted: | May 8, 2021 22:04 | | Subject: | Inventory Change Request for Set 4301-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig rac095 Blue Racer
* Delete 1 Part 30608 Black Minifigure, Hair Flat Top with Extended Sides
* Delete 1 Part 41850 Black Body, Racers Driver
* Delete 1 Part 3626bpb0119 Yellow Minifigure, Head Glasses with Thin Silver Sunglasses, Big Grin Pattern - Blocked Open Stud
|
|
| Author: | crazylegoman | | Posted: | May 8, 2021 21:44 | | Subject: | Re: large collection of Modulex | | Viewed: | 87 times | | Topic: | Modulex | |
|
| In Modulex, ModulexDepot writes:
| | My grandfather left a large collection of Modulex Bricks and Tiles. Is there
a demand for Modulex bricks? Is it worth the effort to record the stock and sell
it via Bricklink? Some bricks are not listed on Bricklink and many are still
sealed in their original packaging.
|
That appears to be a very large amount, so yes, I think it would be worth the
effort.
David
|
|
| Author: | magicalbricks24 | | Posted: | May 8, 2021 19:05 | | Subject: | Re: large collection of Modulex | | Viewed: | 91 times | | Topic: | Modulex | |
|
| In Modulex, ModulexDepot writes:
| | My grandfather left a large collection of Modulex Bricks and Tiles. Is there
a demand for Modulex bricks? Is it worth the effort to record the stock and sell
it via Bricklink? Some bricks are not listed on Bricklink and many are still
sealed in their original packaging.
|
I’m not sure if there is much of a demand, but many MODULEX bricks sell for $1-2
USD each once you are getting larger than a 1x2 brick. For the ones that aren’t
on Bricklink, it is very easy to add an item to the catalog. If someone has not
added it already, I would guess that it is pretty rare. Most importantly, is
Bricklink something that you would want to put time into. When you have that
many parts, it would take a lot of time to sort, list, pack, and ship everything.
My recommendation is to go for it if if you want to sell. You have quite a bit
there, maybe even the most on Bricklink. One seller has nearly 6,000 MODULEX
pieces, while another has nearly 12,000 MODULEX Bricks.
-Nicholas
magicalbricks24
|
|
| Author: | Atrobbus | | Posted: | May 8, 2021 18:40 | | Subject: | Inventory Change Request for Set 7245-1 | | Viewed: | 35 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part BA164pb03 White Stickered Assembly 12 x 1 x 2 with White 'POLIZEI' on Green Background Pattern (Sticker) - Set 7245 - 1 Brick 1 x 12, 1 Brick 1 x 4, 2 Slope, Inverted 45 2 x 1 (Counterpart)
Comments from Submitter:
Add the missing counterparts to the black "police" version, the green "POLIZEI" version. Have a nice day
|
|
| Author: | randyf | | Posted: | May 8, 2021 18:20 | | Subject: | Re: Redundant Counterpart in set 10740-1? | | Viewed: | 44 times | | Topic: | Catalog | |
|
| In Catalog, Bricklanta writes:
| | In Catalog, randyf writes:
| | You only need look at the Regular Items section to see if you have all the parts
of a set.
|
I'm sure that's a really simple exercise for you, but when some of my
parts are counterparts and some of my parts are regular parts and some of my
parts are alternates, there's probably a step I'm missing when I just
look at it.
And when I'm aggregating all of my sets to see what I have and what parts
I still need to add to a wishlist, it's even more muddled. Perhaps you can
share a little more detail of the steps to take to make sure I have all the
parts of a set?
|
The first step on an inventory page, such as
https://www.bricklink.com/catalogItemInv.asp?S=4789-1
is to click on the "Break Minifigs" link near the top.
Now you will have a complete list of every part you should have in the set.
If you have an assembled Counterpart, take it apart into its constituent parts
and use those to compare with the parts in the Regular Items section.
If you have a stickered part, pretend it does not have a sticker and see if it
is in the Regular Items section.
Easy peasy. 
|
|
| Author: | axaday | | Posted: | May 8, 2021 17:30 | | Subject: | Inventory Change Request for Set 75550-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 3068bpb1674 Red Tile 2 x 2 with Groove with Bright Light Orange Scales Pattern (Sticker) - Set 75550 (Counterpart)
* Add 2 Part 22385pb214 Red Tile, Modified 2 x 3 Pentagonal with Bright Light Orange Scales Pattern (Sticker) - Set 75550 (Counterpart)
|
|
| Author: | Arimagnus | | Posted: | May 8, 2021 17:27 | | Subject: | Inventory Change Request for Set 41150-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 2431pb693 Tan Tile 1 x 4 with Wood Grain Pattern (Sticker) - Set 41150 (Counterpart)
Comments from Submitter:
Add stickered part for tan 2431 tile.
|
|
| Author: | ModulexDepot | | Posted: | May 8, 2021 17:25 | | Subject: | large collection of Modulex | | Viewed: | 274 times | | Topic: | Modulex | | Status: | Open | |
|
| My grandfather left a large collection of Modulex Bricks and Tiles. Is there
a demand for Modulex bricks? Is it worth the effort to record the stock and sell
it via Bricklink? Some bricks are not listed on Bricklink and many are still
sealed in their original packaging.
|
|
|
| Author: | randyipp | | Posted: | May 8, 2021 17:19 | | Subject: | Re: Parting out individual bags of sets | | Viewed: | 29 times | | Topic: | Inventories | |
|
| In Inventories, Freshbrick14000 writes:
| | Hello, does anyone know if there is an easy way to part out a specific numbered
bag of a set instead of parting out the entire thing? I ask because I do not
have enough room to part out an entire set, but I do have the room to part out
a few different bag numbers from the set.
Thanks, Ski town bricks
|
Only if you buy some classic sets that are bagged by color, parts inventory for
a set is hard enough, by bag would be excessive!
|
|
| Author: | Kesleyk | | Posted: | May 8, 2021 16:54 | | Subject: | Inventory Change Request for Set 10269-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 44567b Black Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove (match ID 958300)
Comments from Submitter:
I parted out two sets of 10269, and both had 44567b (without groove).
|
|
| Author: | Freshbrick14000 | | Posted: | May 8, 2021 16:41 | | Subject: | Parting out individual bags of sets | | Viewed: | 46 times | | Topic: | Inventories | | Status: | Open | |
|
| Hello, does anyone know if there is an easy way to part out a specific numbered
bag of a set instead of parting out the entire thing? I ask because I do not
have enough room to part out an entire set, but I do have the room to part out
a few different bag numbers from the set.
Thanks, Ski town bricks
|
|
| Author: | Bricklanta | | Posted: | May 8, 2021 16:23 | | Subject: | Re: Redundant Counterpart in set 10740-1? | | Viewed: | 40 times | | Topic: | Catalog | |
|
| In Catalog, randyf writes:
| | You only need look at the Regular Items section to see if you have all the parts
of a set.
|
I'm sure that's a really simple exercise for you, but when some of my
parts are counterparts and some of my parts are regular parts and some of my
parts are alternates, there's probably a step I'm missing when I just
look at it.
And when I'm aggregating all of my sets to see what I have and what parts
I still need to add to a wishlist, it's even more muddled. Perhaps you can
share a little more detail of the steps to take to make sure I have all the
parts of a set?
|
|
| Author: | WilliamRaine | | Posted: | May 8, 2021 14:59 | | Subject: | Inventory Change Request for Set 8880-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part BA131pb03 Black Stickered Assembly 8 x 2 with LEGO Technic Logo, Yellow Stripe and '4x4x4' Pattern (Sticker) - Set 8880 - 2 Tile 1 x 8 (Counterpart)
Comments from Submitter:
Stickered counterpart
|
|
| Author: | randyf | | Posted: | May 8, 2021 14:52 | | Subject: | Re: Redundant Counterpart in set 10740-1? | | Viewed: | 40 times | | Topic: | Catalog | |
|
| In Catalog, Bricklanta writes:
| | I noticed in set 10740-1 (Fire Patrol Suitcase) that two of the three counterparts
are redundant. In the regular set inventory are parts for a motorcycle sub assembly.
That subassembly (52035c03) is listed as a counterpart for 6 regular parts -
1x Red fairing, 1x Black chassis, 2x Black tires 50861, and 2x Red wheels 50862.
However two wheel & tire subassemblies are *also* listed as counterparts - 2x
50862c01, which comprises the same two tires and the same two wheels as the motorcycle
subassembly.
|
Wheel and tire assemblies are always listed as counterparts in an inventory separate
from any larger counterpart assemblies that may contain them. This is standard
catalog practice.
| | I feel this is redundant and causes confusion - a single individual regular piece
has two counterparts. Since counterparts are barred from having MatchIDs, this
is really confusing and trying to do something like finding out if i have all
the parts of a set is complicated.
|
You only need look at the Regular Items section to see if you have all the parts
of a set.
| | I don't know if there are any guidelines on counterparts - but it's clear
to me that putting sub-sub-assemblies in the inventory isn't standard, otherwise
we'd see torso assemblies in counterparts to minifigures.
|
As mentioned above, it is standard. Torso assemblies are not included in counterparts
because torso assemblies come assembled in a set and are only listed in the Regular
Items section.
| | Can we at least have a guideline that a single regular part should only have
1 counterpart listed in the inventory? Or move the wheel&tire to be a counterpart
inside the motorcycle assembly?
|
I am sorry, but no.
|
|
| Author: | Bricklanta | | Posted: | May 8, 2021 14:38 | | Subject: | Redundant Counterpart in set 10740-1? | | Viewed: | 85 times | | Topic: | Catalog | | Status: | Open | |
|
| I noticed in set 10740-1 (Fire Patrol Suitcase) that two of the three counterparts
are redundant. In the regular set inventory are parts for a motorcycle sub assembly.
That subassembly (52035c03) is listed as a counterpart for 6 regular parts -
1x Red fairing, 1x Black chassis, 2x Black tires 50861, and 2x Red wheels 50862.
However two wheel & tire subassemblies are *also* listed as counterparts - 2x
50862c01, which comprises the same two tires and the same two wheels as the motorcycle
subassembly.
I feel this is redundant and causes confusion - a single individual regular piece
has two counterparts. Since counterparts are barred from having MatchIDs, this
is really confusing and trying to do something like finding out if i have all
the parts of a set is complicated.
I don't know if there are any guidelines on counterparts - but it's clear
to me that putting sub-sub-assemblies in the inventory isn't standard, otherwise
we'd see torso assemblies in counterparts to minifigures.
Can we at least have a guideline that a single regular part should only have
1 counterpart listed in the inventory? Or move the wheel&tire to be a counterpart
inside the motorcycle assembly?
|
|
| Author: | zaskar | | Posted: | May 8, 2021 13:31 | | Subject: | Inventory Change Request for Set 5891-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Dark Bluish Gray {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)}
Comments from Submitter:
Confirmed part 4623a in three parted out sets.
|
| Author: | elias3 | | Posted: | May 8, 2021 13:24 | | Subject: | Re: We have a new Inventories Administrator! | | Viewed: | 61 times | | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
Congratulations Jonas 😷
|
|
| Author: | elias3 | | Posted: | May 8, 2021 13:22 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 46 times | | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| | Greetings BrickLink catalog enthusiasts!
You will be pleased to learn that we have just today appointed a new Catalog
Associate - Randyf. Randy has served as an Inventories Administrator for the
last couple years and has done a fantastic job. We feel this promotion, though
it has been long in coming, is very well deserved.
As a reminder to those who are still learning about the BrickLink Community Expert
Program, the Catalog Associate position gives admin privileges over the entire
catalog half of our BrickLink system. After one year's experience, Catalog
Associates are eligible for promotion to full Catalog Admin, which gives them
full privileges on both sides, for both catalog and inventories.
https://www.bricklink.com/memberAdmins.asp
We plan to update the Hall of Fame page very soon. There are several things to
add, including Randy's time serving as Inventory Admin.
Please welcome our new associate!
|
Congratulation Randy 😷
|
|
| Author: | d4n33l | | Posted: | May 8, 2021 12:09 | | Subject: | Re: Inventory Change Request for Set 21307-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| | Got it, thanks! |
| Author: | Turez | | Posted: | May 8, 2021 12:06 | | Subject: | Re: Inventory Change Request for Set 21307-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, d4n33l writes:
| | Please make changes to the following inventory:
* Delete 1 Part 30553 Black Hinge Cylinder 1 x 2 Locking with 2 Fingers, 9 Teeth and Axle Hole on Ends with Slots (Extra)
Comments from Submitter:
You can see an evidence here
https://youtu.be/xAxMAoHMUIk?t=936
|
This extra part was requested to be added by a known and reliable contributer:
https://www.bricklink.com/messageThread.asp?ID=231366
And in addition to that I just checked the set in my personal collection and
it has this extra part. Therefore this request will not be accepted.
|
|
| Author: | d4n33l | | Posted: | May 8, 2021 11:18 | | Subject: | Inventory Change Request for Set 21307-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 30553 Black Hinge Cylinder 1 x 2 Locking with 2 Fingers, 9 Teeth and Axle Hole on Ends with Slots (Extra)
Comments from Submitter:
You can see an evidence here
https://youtu.be/xAxMAoHMUIk?t=936
|
|
| Author: | Turez | | Posted: | May 8, 2021 07:18 | | Subject: | Re: Inventory Change Request for Set 42115-1 | | Viewed: | 27 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, d4n33l writes:
| | Please make changes to the following inventory:
* Change {4 to 1} Part Black 48729b Bar 1L with Clip Mechanical Claw, Cut Edges and Hole on Side (Extra)
* Change {4 to 3} Part Blue 4274 Technic, Pin 1/2 (Extra)
* Change {6 to 4} Part Black 2780 Technic, Pin with Friction Ridges Lengthwise, Staggered, with or without Center Slots (Extra)
Comments from Submitter:
Checked in 2 different sets!
|
Please see the guideline about extra parts here:
https://www.bricklink.com/help.asp?helpID=1562
"Removing or Changing Extra Items - Extra parts can vary depending on
when and where a set was manufactured, meaning that some new sets may include
them and others may not. The quantity of these extra parts can also vary. Extra
parts are typically not removed or reduced in quantity unless it can be determined
that they were originally added or increased in error."
The 4
and the 6
can be seen here:
https://youtu.be/5c6xoochiOI?t=770
So their quantities will not be changed.
I will have a look at
later.
|
|
| Author: | d4n33l | | Posted: | May 8, 2021 06:25 | | Subject: | Inventory Change Request for Set 42115-1 | | Viewed: | 33 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {4 to 1} Part Black 48729b Bar 1L with Clip Mechanical Claw, Cut Edges and Hole on Side (Extra)
* Change {4 to 3} Part Blue 4274 Technic, Pin 1/2 (Extra)
* Change {6 to 4} Part Black 2780 Technic, Pin with Friction Ridges Lengthwise, Staggered, with or without Center Slots (Extra)
Comments from Submitter:
Checked in 2 different sets!
|
|
| Author: | Turez | | Posted: | May 8, 2021 06:18 | | Subject: | Re: Inventory Change Request for Set 1083-1 | | Viewed: | 25 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 2 Part 6232 Red Brick, Modified 2 x 2 with Pin and Axle Hole
* Add 2 Part 4730 Red Brick, Modified 2 x 2 with Pin and No Axle Hole
|
|
You know box images are not a reliable source.
But here I think we can be certain that this type
did not yet exist at that time.
|
|
| Author: | SezaR | | Posted: | May 7, 2021 19:11 | | Subject: | Re: Inventory Change Request for Set 1083-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 2 Part 6232 Red Brick, Modified 2 x 2 with Pin and Axle Hole
* Add 2 Part 4730 Red Brick, Modified 2 x 2 with Pin and No Axle Hole
|
|
|
| Author: | SezaR | | Posted: | May 7, 2021 19:10 | | Subject: | Inventory Change Request for Set 1083-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 6232 Red Brick, Modified 2 x 2 with Pin and Axle Hole
* Add 2 Part 4730 Red Brick, Modified 2 x 2 with Pin and No Axle Hole
|
|
| Author: | smekel | | Posted: | May 7, 2021 19:00 | | Subject: | Re: Searching by color in Brickstore/Brickstock? | | Viewed: | 27 times | | Topic: | Inventories | |
|
| In Inventories, rslander writes:
| | Hi, apologies if this isn't the correct place to ask, but I was wanting to
create a list to mass upload parts to my inventory and was told about Brickstore
and Brickstock.
I was wanting to know if there was a way to search for a specific color of a
part. I've attached a picture as an example, I want to search for light
nougat female minifig heads. Is this possible in either of the applications?
If not is there a different piece of software I could use? Thank you!
|
I am not a Brickstore expert, but I don't see a way to do it there. However,
you might be able to do it here in the Bricklink site by filling in the form
here:
Looking for the keyword "female" in Item Type "Parts", Category "Minifigure,
Head", Colors "Light Nougat".
https://www.bricklink.com/catalogList.asp?pg=1&catXrefLevel=0&colorPart=90&catType=P&catID=238&v=1
|
|
| Author: | sjonni82 | | Posted: | May 7, 2021 18:04 | | Subject: | Inventory Change Request for Set 8051-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 87080pb065 Black Technic, Panel Fairing # 1 Small Smooth Short, Side A with Black Number 88 Pattern (Sticker) - Set 8051 (Counterpart)
|
| Author: | sjonni82 | | Posted: | May 7, 2021 18:02 | | Subject: | Inventory Change Request for Set 76131-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 10202pb026 Dark Bluish Gray Tile 6 x 6 with Metallic Light Blue Avengers Logo Pattern (Sticker) - Set 76131 (Counterpart)
|
|
| Author: | WilliamRaine | | Posted: | May 7, 2021 17:34 | | Subject: | Inventory Change Request for Set 4195-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig poc043 Queen Anne's Revenge Masthead
* Delete 2 Part 59230 White Arm Mechanical, Straight with Clips at 90 degrees (Vertical Grip)
* Delete 1 Part 93060 Trans-Orange Torso Skeleton, Angular Rib Cage, Plain
* Change {17 to 16} Part White 3626bpb0001 Minifigure, Head Skull Standard Pattern - Blocked Open Stud
* Change {17 to 16} Part White 3626cpb0001 Minifigure, Head Skull Standard Pattern - Hollow Stud (Alternate)
* Change {2 to 3} Part White 3626cpb0001 Minifigure, Head Skull Standard Pattern - Hollow Stud (Alternate)
* Change {6 to 4} Part White 30377 Arm Mechanical, Battle Droid
Comments from Submitter:
Changes to reflect the masthead as a figure entry
|
|
| Author: | rslander | | Posted: | May 7, 2021 15:18 | | Subject: | Searching by color in Brickstore/Brickstock? | | Viewed: | 56 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi, apologies if this isn't the correct place to ask, but I was wanting to
create a list to mass upload parts to my inventory and was told about Brickstore
and Brickstock.
I was wanting to know if there was a way to search for a specific color of a
part. I've attached a picture as an example, I want to search for light
nougat female minifig heads. Is this possible in either of the applications?
If not is there a different piece of software I could use? Thank you!
|
|
|
| Author: | edeevo | | Posted: | May 7, 2021 14:29 | | Subject: | Re: What color is this? | | Viewed: | 50 times | | Topic: | Colors | |
|
| In Colors, Brock writes:
| | What color is this 1x12 technic brick? We got a couple from Legoland, but it
doesn't look like it's a color that has been produced in the last 10
years. My best guess is either dark blue-violet or blue-violet, but I don't
have any parts in those colors to verify. It looks like a darker version of dark
azure with just a little bit of green in it.
Thanks,
Brock
|
It's blue that was likely molded a long time ago; and as a result of that
era's mixed materials/colors, or simply discoloration from Sunlight exposure,
etc., they have changed hue over time... I have many of various shades of blue
from various older sets... the ones I have typically look brand new (shiny, no
scratches), they're just weird shades of blue...
Life is Good.
~Ed.
|
|
| Author: | axaday | | Posted: | May 7, 2021 12:13 | | Subject: | Re: What color is this? | | Viewed: | 55 times | | Topic: | Colors | |
|
| In Colors, Brock writes:
| | What color is this 1x12 technic brick? We got a couple from Legoland, but it
doesn't look like it's a color that has been produced in the last 10
years. My best guess is either dark blue-violet or blue-violet, but I don't
have any parts in those colors to verify. It looks like a darker version of dark
azure with just a little bit of green in it.
Thanks,
Brock
|
Brittle Blue
|
|
| Author: | tons_of_bricks | | Posted: | May 7, 2021 11:52 | | Subject: | Re: What color is this? | | Viewed: | 48 times | | Topic: | Colors | |
|
| In Colors, Brock writes:
| | What color is this 1x12 technic brick? We got a couple from Legoland, but it
doesn't look like it's a color that has been produced in the last 10
years. My best guess is either dark blue-violet or blue-violet, but I don't
have any parts in those colors to verify. It looks like a darker version of dark
azure with just a little bit of green in it.
Thanks,
Brock
|
Looks like brittle blue to me.
|
|
| Author: | Brock | | Posted: | May 7, 2021 11:48 | | Subject: | What color is this? | | Viewed: | 182 times | | Topic: | Colors | | Status: | Open | |
|
| What color is this 1x12 technic brick? We got a couple from Legoland, but it
doesn't look like it's a color that has been produced in the last 10
years. My best guess is either dark blue-violet or blue-violet, but I don't
have any parts in those colors to verify. It looks like a darker version of dark
azure with just a little bit of green in it.
Thanks,
Brock
|
|
|
| Author: | Roxyncz | | Posted: | May 7, 2021 07:24 | | Subject: | Inventory Change Request for Set 42112-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 24119pb013 White Technic, Panel Curved 7 x 3 with 2 Pin Holes through Panel Surface with Tank Filler Cap, Blue 'WATER' and Arrow Pattern (Sticker) - Set 42112 (Counterpart)
* Add 1 Part 11947pb060 Dark Blue Technic, Panel Fairing #22 Very Small Smooth, Side A with Orange and White Stripe, Letter C and Arrows Pattern (Sticker) - Set 42112 (Counterpart)
* Add 1 Part 11946pb060 Dark Blue Technic, Panel Fairing #21 Very Small Smooth, Side B with Orange and White Stripe, Letter C and Arrows Pattern (Sticker) - Set 42112 (Counterpart)
* Add 1 Part 60484pb003 Black Technic, Liftarm, Modified T-Shape Thick 3 x 3 with Silver Letter V Shaped Logo on Dark Blue Background Pattern (Sticker) - Set 42112 (Counterpart)
* Add 1 Part 32524pb049 Light Bluish Gray Technic, Liftarm Thick 1 x 7 with Black and Orange Danger Stripes, Arrows and White 'STAY CLEAR' Pattern (Sticker) - Set 42112 (Counterpart)
* Add 1 Part 24116pb020R Dark Blue Technic, Panel Curved 3 x 5 x 3 with Black Air Vent, Orange and White Stripes Pattern Model Right Side (Stickers) - Set 42112 (Counterpart)
* Add 1 Part 24116pb020L Dark Blue Technic, Panel Curved 3 x 5 x 3 with Black Air Vent, Orange and White Stripes Pattern Model Left Side (Stickers) - Set 42112 (Counterpart)
* Add 1 Part 32524pb050 Light Bluish Gray Technic, Liftarm Thick 1 x 7 with Yellow Letter N, Arrows and Concrete Mixer Truck Pattern (Sticker) - Set 42112 (Counterpart)
* Add 1 Part 32524pb051 Light Bluish Gray Technic, Liftarm Thick 1 x 7 with Yellow and Orange Arrows and Concrete Mixer Drum Pattern (Sticker) - Set 42112 (Counterpart)
* Add 1 Part 32523pb31R Light Bluish Gray Technic, Liftarm Thick 1 x 3 with Black and Orange Danger Stripes Pattern Model Right Side (Sticker) - Set 42112 (Counterpart)
* Add 1 Part 32523pb31R Blue Technic, Liftarm Thick 1 x 3 with Black and Orange Danger Stripes Pattern Model Right Side (Sticker) - Set 42112 (Counterpart)
* Add 1 Part 32523pb31L Light Bluish Gray Technic, Liftarm Thick 1 x 3 with Black and Orange Danger Stripes Pattern Model Left Side (Sticker) - Set 42112 (Counterpart)
* Add 1 Part 32523pb31L Blue Technic, Liftarm Thick 1 x 3 with Black and Orange Danger Stripes Pattern Model Left Side (Sticker) - Set 42112 (Counterpart)
* Add 2 Part 40490pb056 Blue Technic, Liftarm Thick 1 x 9 with Black and Silver Grille Pattern (Sticker) - Set 42112 (Counterpart)
* Add 1 Part 32316pb059 Light Bluish Gray Technic, Liftarm Thick 1 x 5 with 'CM 42112' License Plate Pattern (Sticker) - Set 42112 (Counterpart)
* Add 1 Part 2431pb696 Light Bluish Gray Tile 1 x 4 with 'CM 42112' License Plate Pattern (Sticker) - Set 42112 (Counterpart)
|
|
| Author: | Turez | | Posted: | May 7, 2021 06:02 | | Subject: | Re: Inventory Change Request for Set 7245-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Atrobbus writes:
| | Please make changes to the following inventory:
* Add 2 Part BA164pb01 White Stickered Assembly 12 x 1 x 2 with White 'POLICE' On Black Background Pattern (Sticker) - Set 7245 - 1 Brick 1 x 12, 1 Brick 1 x 4, 2 Slope, Inverted 2 x 1 (Alternate)
Comments from Submitter:
Hey there, I hope I did this correctly. Basically I have the prisoner transport 7245 in the German (Green/POLIZEI) version and I noticed that there is no counterpart to the english version of BA164pb01 yet. All the other stickers are also listed in the German version, only this one was missing. Have a good one!
|
This request will not be approved since the part BA164pb01 is already included
in the inventory.
A new catalog entry is needed for the German sticker version (see further details
via mail).
|
|
| Author: | fritsp | | Posted: | May 7, 2021 05:59 | | Subject: | Re: Inventory Change Request for Set 7245-1 | | Viewed: | 16 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Atrobbus writes:
| | | | Comments from Submitter:
Hey there, I hope I did this correctly.
|
|
Almost!
First add the "sticker over assembly" as a part, probably called 'BA164pb03'
Then add the image to that part (nice image!)
Then add the newly added part to the set as a "counterpart"
|
|
| Author: | Turez | | Posted: | May 7, 2021 05:45 | | Subject: | Re: Inventory Change Request for Set 42099-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, xoshimin writes:
| | Please make changes to the following inventory:
* Add 2 Part 61408 Black Technic, Liftarm, Modified Crank / Pin 1 x 3 - Axle Holes and Squared Pin Hole (Alternate) (match ID 1)
* Change 2 Part Black 33299 Technic, Liftarm, Modified Crank / Pin 1 x 3 - Axle Holes {Regular to Alternate} {match ID 0 to 1}
|
I assume the source for these requests is a sealed set?
|
|
| Author: | Atrobbus | | Posted: | May 7, 2021 05:05 | | Subject: | Re: Inventory Change Request for Set 7245-1 | | Viewed: | 17 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Atrobbus writes:
| | Please make changes to the following inventory:
* Add 2 Part BA164pb01 White Stickered Assembly 12 x 1 x 2 with White 'POLICE' On Black Background Pattern (Sticker) - Set 7245 - 1 Brick 1 x 12, 1 Brick 1 x 4, 2 Slope, Inverted 2 x 1 (Alternate)
Comments from Submitter:
Hey there, I hope I did this correctly. Basically I have the prisoner transport 7245 in the German (Green/POLIZEI) version and I noticed that there is no counterpart to the english version of BA164pb01 yet. All the other stickers are also listed in the German version, only this one was missing. Have a good one!
|
The image of course:
|
|
|
| Author: | Atrobbus | | Posted: | May 7, 2021 05:03 | | Subject: | Inventory Change Request for Set 7245-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part BA164pb01 White Stickered Assembly 12 x 1 x 2 with White 'POLICE' On Black Background Pattern (Sticker) - Set 7245 - 1 Brick 1 x 12, 1 Brick 1 x 4, 2 Slope, Inverted 2 x 1 (Alternate)
Comments from Submitter:
Hey there, I hope I did this correctly. Basically I have the prisoner transport 7245 in the German (Green/POLIZEI) version and I noticed that there is no counterpart to the english version of BA164pb01 yet. All the other stickers are also listed in the German version, only this one was missing. Have a good one!
|
|
| Author: | xoshimin | | Posted: | May 7, 2021 04:37 | | Subject: | Inventory Change Request for Set 42107-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 61408 Light Bluish Gray Technic, Liftarm, Modified Crank / Pin 1 x 3 - Axle Holes and Squared Pin Hole (Alternate) (match ID 1)
* Change 1 Part Light Bluish Gray 33299 Technic, Liftarm, Modified Crank / Pin 1 x 3 - Axle Holes {Regular to Alternate} {match ID 0 to 1}
|
|
| Author: | xoshimin | | Posted: | May 7, 2021 04:33 | | Subject: | Inventory Change Request for Set 42099-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 61408 Black Technic, Liftarm, Modified Crank / Pin 1 x 3 - Axle Holes and Squared Pin Hole (Alternate) (match ID 1)
* Change 2 Part Black 33299 Technic, Liftarm, Modified Crank / Pin 1 x 3 - Axle Holes {Regular to Alternate} {match ID 0 to 1}
|
|
| Author: | AshleyJames | | Posted: | May 6, 2021 23:51 | | Subject: | Inventory Change Request for Set 41185-1 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 2335pb231 Black Flag 2 x 2 Square with Crossed Hammer and Axe Pattern (Sticker) - Set 41185 (Counterpart)
* Add 1 Part 22886pb09 Light Bluish Gray Brick 1 x 2 x 3 with Books, Keys and Potion Flask Pattern (Sticker) - Set 41185 (Counterpart)
* Add 1 Part 2335pb232 Black Flag 2 x 2 Square with Rock Crystal and Sparkles Pattern (Sticker) - Set 41185 (Counterpart)
* Add 2 Part 3245cpb168 Black Brick 1 x 2 x 2 with Inside Stud Holder with Gold Goblin King Eye Pattern (Sticker) - Set 41185 (Counterpart)
* Add 1 Part 3068bpb1666 White Tile 2 x 2 with Groove with Newspaper with Goblin Holding Diamond Pattern (Sticker) - Set 41185 (Counterpart)
* Add 1 Part 3068bpb1667 White Tile 2 x 2 with Groove with Engineering Design, Arrows and Number 4 and 5 Pattern (Sticker) - Set 41185 (Counterpart)
Comments from Submitter:
41185stk01 (Set 41185)
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
Denmark
United Kingdom, England
Germany, Niedersachsen
Spain, Comunidad Valenciana
USA, Washington
)
)
)
Australia, South Australia
Canada, Ontario
)
)
Norway, Oslo
Switzerland, St. Gallen
Italy, Marche
Sweden, Örebro
Czech Republic, Moravskoslezský Kraj
Belgium, Oost-Vlaanderen
Russia, St. Petersburg
Iceland
Netherlands, Overijssel
