Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | randyf  | | Posted: | Jun 30, 2020 03:04 | | Subject: | Re: Inventory Change Request for Set 71044-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, JamesHugMD writes:
| | Please make changes to the following inventory:
* Change {2 to 3} Part Pearl Gold 85861 Plate, Round 1 x 1 with Open Stud (Extra)
* Change {1 to 2} Part Red 3024 Plate 1 x 1 (Extra)
* Change {1 to 2} Part White 85861 Plate, Round 1 x 1 with Open Stud (Extra)
* Change {2 to 1} Part Tan 3024 Plate 1 x 1 (Extra)
Comments from Submitter:
I built this set brand new from LEGO.com I double checked my extra parts and compared between Bricklink and Rebrickable.
|
I watched a real-time build of the entire set, and all of the extras listed in
the inventory on BrickLink were correct except for the four changes that you
have outlined here.
Requests accepted.
Cheers,
Randy
|
 |
| Author: | B3iR3 | | Posted: | Jun 29, 2020 18:56 | | Subject: | Re: wanted list | | Viewed: | 33 times | | Topic: | Suggestions | |
|
| Hi Nick
I didnt realise this, thanks for the tip! i will try out!
B3iR3
In Suggestions, namenick123 writes:
| | If I understand you correctly, you can accomplish this by going into your Wanted
List and click on "Apply Order" on the top right. It will then give you a list
of your most recent orders and you can select whichever order applies to that
Wanted List. The amounts purchased will then appear in the "have" amount under
the wanted amount for each item.
Hope this helps.
Nick
|
|
|
| Author: | SylvainLS | | Posted: | Jun 29, 2020 18:31 | | Subject: | Re: wanted list | | Viewed: | 15 times | | Topic: | Suggestions | |
|
| In Suggestions, namenick123 writes:
| | If I understand you correctly, you can accomplish this by going into your Wanted
List and click on "Apply Order" on the top right. It will then give you a list
of your most recent orders and you can select whichever order applies to that
Wanted List. The amounts purchased will then appear in the "have" amount under
the wanted amount for each item.
Hope this helps.
Nick
|
Beware with this feature: you can apply the same order multiple times, even to
the same list.
So an ordered part will be counted multiple times.
Also, do not take for granted that an ordered part will be in the package or
that you’ll receive the package. Most of the time, the part will be there and
the package will arrive, but there might be errors, missing parts, wrong colours….
|
|
| Author: | namenick123 | | Posted: | Jun 29, 2020 18:16 | | Subject: | Re: wanted list | | Viewed: | 20 times | | Topic: | Suggestions | |
|
| If I understand you correctly, you can accomplish this by going into your Wanted
List and click on "Apply Order" on the top right. It will then give you a list
of your most recent orders and you can select whichever order applies to that
Wanted List. The amounts purchased will then appear in the "have" amount under
the wanted amount for each item.
Hope this helps.
Nick
|
|
| Author: | B3iR3 | | Posted: | Jun 29, 2020 17:14 | | Subject: | wanted list | | Viewed: | 74 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Hello
I would like the wanted list(s) to be automatically updated when i purchase certain
items that are on those list(s).
It would really save me a lot of time not having to figure out which items to
delete from the wanted list(s), and which ones to keep.
Kind regards
B3iR3
|
| Author: | MFelgate | | Posted: | Jun 29, 2020 14:29 | | Subject: | Inventory Change Request for Set 42080-1 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 58176 Trans-Orange Bar with Light Cover (Bulb) / Bionicle Barraki Eye (Extra)
* Add 1 Part 43093 Blue Technic, Axle Pin with Friction Ridges Lengthwise (Extra)
|
| Author: | cycbuild | | Posted: | Jun 29, 2020 10:59 | | Subject: | Re: can't find part 11113? | | Viewed: | 42 times | | Topic: | Catalog | |
|
| In Catalog, Sportsgurl writes:
| | Hi, searching for part 11113 produces nothing but that seems to be the part number.
Does this need to be added to the catalog? Or am I missing something?
TIA
Joy
|
Search Tips here -
https://www.bricklink.com/help.asp?helpID=29
|
| Author: | cycbuild | | Posted: | Jun 29, 2020 10:46 | | Subject: | Re: can't find part 11113? | | Viewed: | 43 times | | Topic: | Catalog | |
|
| In Catalog, Sportsgurl writes:
| | Hi, searching for part 11113 produces nothing but that seems to be the part number.
Does this need to be added to the catalog? Or am I missing something?
TIA
Joy
|
add a * for all results "part1113*"
|
| Author: | Sportsgurl | | Posted: | Jun 29, 2020 10:43 | | Subject: | can't find part 11113? | | Viewed: | 88 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi, searching for part 11113 produces nothing but that seems to be the part number.
Does this need to be added to the catalog? Or am I missing something?
TIA
Joy
|
|
|
| Author: | yorbrick | | Posted: | Jun 29, 2020 06:53 | | Subject: | Re: sw0527a r2-d2 misprint? | | Viewed: | 30 times | | Topic: | Help | |
|
| In Help, iprice writes:
| | In Help, spacecaptain writes:
| | has anyone seen this? the head is rotated 45 degrees. it came in 75257. i
can't find any pictures anywhere.
|
I'm amazed that, despite the head being rotated, it's actualy printed
level. That's gotta be a misprint! 
|
It is interesting that all the colours are aligned correctly on an unaligned
part, so they must be doing "wet-on-wet" printing - printing one colour directly
after another without moving the part.
|
|
| Author: | iprice | | Posted: | Jun 29, 2020 06:41 | | Subject: | Re: sw0527a r2-d2 misprint? | | Viewed: | 33 times | | Topic: | Help | |
|
| In Help, spacecaptain writes:
| | has anyone seen this? the head is rotated 45 degrees. it came in 75257. i
can't find any pictures anywhere.
|
I'm amazed that, despite the head being rotated, it's actualy printed
level. That's gotta be a misprint!
|
|
| Author: | SezaR | | Posted: | Jun 29, 2020 05:07 | | Subject: | Re: Inventory Change Request for Set 8880-1 | | Viewed: | 28 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 20 Part 6558 Black Technic, Pin 3L with Friction Ridges Lengthwise (Alternate) (match ID 6)
* Delete 2 Part 6558 Black Technic, Pin 3L with Friction Ridges Lengthwise (Extra)
* Change {18 to 20} Part Black 6558 Technic, Pin 3L with Friction Ridges Lengthwise {match ID 6 to 0}
* Change 4 Part White 6540a Technic, Steering Arm Large with Wheel Hub Holder - Pin Connection {match ID 1 to 99}
* Change 4 Part Light Gray 6540b Technic, Steering Arm Large with Wheel Hub Holder - Axle Connection (Alternate) {match ID 1 to 99}
* Change 4 Part Light Gray 6540a Technic, Steering Arm Large with Wheel Hub Holder - Pin Connection (Alternate) {match ID 1 to 99}
* Change 4 Part White 6540b Technic, Steering Arm Large with Wheel Hub Holder - Axle Connection (Alternate) {match ID 1 to 99}
* Change 4 Part Light Gray 2736 Technic, Axle Tow Ball (Alternate) {match ID 4 to 99}
* Change 4 Part Black 6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball {match ID 4 to 99}
* Change 4 Part Black 2736 Technic, Axle Tow Ball (Alternate) {match ID 4 to 99}
|
|
Follow-up from:
https://www.bricklink.com/message.asp?ID=1207021
Peeron has the the earliest version, in which we can see white
and light gray
I do have another version with ID 120530, that has extra pages 16-17.
On the insturctions page 16-17, there are white
and light gray
and on the extra pages 16-17, there are light gray
and black
Question: in what set and which version of insturctions, light gray
is used?!
Answer: set
So TLG did a back and forth 6540a-6540b-6540a
Questions 2: Is there any difference between white 6540a (from 1994) and light
gray 6540a (from 1999)?
****************
There are 20 of black
used on both versions as follows:
2 page 12 step 14
2 page 20 step 21
2 page 24 step 24
4 page 36 step 5
4 page 36 step 6
2 page 37 step 30
2 page 38 step 31
2 page 42 step 7
2 page 43 step 8
|
|
| Author: | infinibrix | | Posted: | Jun 29, 2020 02:53 | | Subject: | Re: sw0527a r2-d2 misprint? | | Viewed: | 31 times | | Topic: | Help | |
|
| In Help, infinibrix writes:
| | In Help, spacecaptain writes:
| | has anyone seen this? the head is rotated 45 degrees. it came in 75257. i
can't find any pictures anywhere.
|
Almost certainly a misprint but something that I think will be worth something
to the right person as its set at a nice rotating angle and whilst you can always
set heads at a full 90 degrees where its facing out from the side that angle
always looks a bit forced. I think someone would appreciate something like that
for a display scene compared with always having their astromech droids facing
forwards the whole time 
In fact rather than re-releasing almost identical R2-D2's it would be a nice
touch if Lego intentionally made some like this to give a bit more variation
to what is otherwise a difficult minifigure to make look unique when compared
with other minifig characters.
I have lots of those heads and they look to all be facing forwards from what
I can tell
|
Of course with it being a relatively new set there is always the possibility
that someone doing the set inventory assumed it was the same version as what
appears in the other sets but given the Lego site has images of this minifig
facing forwards I can't imaging it to be an intentional difference?
|
|
| Author: | infinibrix | | Posted: | Jun 29, 2020 02:41 | | Subject: | Re: sw0527a r2-d2 misprint? | | Viewed: | 36 times | | Topic: | Help | |
|
| In Help, spacecaptain writes:
| | has anyone seen this? the head is rotated 45 degrees. it came in 75257. i
can't find any pictures anywhere.
|
Almost certainly a misprint but something that I think will be worth something
to the right person as its set at a nice rotating angle and whilst you can always
set heads at a full 90 degrees where its facing out from the side that angle
always looks a bit forced. I think someone would appreciate something like that
for a display scene compared with always having their astromech droids facing
forwards the whole time
In fact rather than re-releasing almost identical R2-D2's it would be a nice
touch if Lego intentionally made some like this to give a bit more variation
to what is otherwise a difficult minifigure to make look unique when compared
with other minifig characters.
I have lots of those heads and they look to all be facing forwards from what
I can tell
|
|
| Author: | Roxyncz | | Posted: | Jun 29, 2020 02:23 | | Subject: | Inventory Change Request for Set 60138-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 92593pb037 White Plate, Modified 1 x 4 with 2 Studs without Groove with 'CS60138' License Plate Pattern (Sticker) - Set 60138 (Counterpart)
* Add 1 Part 87616pb012 Dark Bluish Gray Aircraft Fuselage Curved Aft Section 6 x 10 Bottom with Gray and White Lines and '60138' on Blue Background Pattern on Both Sides (Stickers) - Set 60138 (Counterpart)
* Add 2 Part 61678pb124 Dark Red Slope, Curved 4 x 1 with Silver Vents Pattern (Sticker) - Set 60138 (Counterpart)
* Add 1 Part 6636pb211 Blue Tile 1 x 6 with Blue 'POLICE' on White Background Pattern (Sticker) - Set 60138 (Counterpart)
* Add 1 Part 6079pb08 White Fence 1 x 8 x 2 2/3 with Black and Yellow Danger Stripes Pattern (Sticker) - Set 60138 (Counterpart)
* Add 1 Part 93589pb009 Dark Red Wedge 4 x 2 x 1 1/3 with 1 x 4 Base with Grille and Black Stripes Pattern (Sticker) - Set 60138 (Counterpart)
* Add 1 Part 45677pb122 White Wedge 4 x 4 x 2/3 Triple Curved with Blue Number 02 on White Background Pattern (Sticker) - Set 60138 (Counterpart)
|
|
| Author: | primadeluxe | | Posted: | Jun 29, 2020 02:10 | | Subject: | Re: Inventory Change Request for Set 6382-1 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
|
| Yes, I just submitted it yesterday. So it would have been nice to finish it myself,
but thanks for your time!
In Inventories Requests, AFOLliquidation writes:
| | Please make changes to the following inventory:
* Add 1 Part BA196pb01 Red Stickered Assembly 12 x 6 x 2 1/3 with Fire Pattern (Sticker) - Set 6382 - 3 Brick 1 x 6, 1 Brick 1 x 4, 1 Plate 6 x 10 (Counterpart)
Comments from Submitter:
This item number is already in the system it just needs to be linked to set 6382
|
|
|
| Author: | primadeluxe | | Posted: | Jun 29, 2020 02:07 | | Subject: | Inventory Change Request for Set 180-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part BA198pb01L Black Stickered Assembly 8 x 1 x 2 with Red '180' with Oval Border on Black Background Pattern Model Left Side (Sticker) - Set 180 - 1 Brick 1 x 6, 1 Brick 1 x 8 (Counterpart)
* Add 1 Part BA198pb01R Black Stickered Assembly 8 x 1 x 2 with Red '180' with Oval Border on Black Background Pattern Model Right Side (Sticker) - Set 180 - 1 Brick 1 x 6, 1 Brick 1 x 8 (Counterpart)
* Add 1 Part BA197pb01 Black Stickered Assembly 4 x 4 x 2 with Red '180' with Oval Border on Black Background Pattern (Sticker) - Set 180 - 1 Brick 1 x 4, 2 Slopes 45 2 X 4 (Counterpart)
|
|
| Author: | Vosblokjes | | Posted: | Jun 29, 2020 01:44 | | Subject: | Inventory Change Request for Set 60071-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 88930pb122 Dark Blue Slope, Curved 2 x 4 x 2/3 with Bottom Tubes with '06' and 'POLICE' Pattern (Sticker) - Set 60071 (Counterpart)
|
|
| Author: | SezaR | | Posted: | Jun 29, 2020 00:35 | | Subject: | Re: Inventory Change Request for Set 8880-1 | | Viewed: | 26 times | | Topic: | Inventories Requests | |
|
| | | They will probably sit for longer until I can muster up the courage to go through it.
|
you already muster up the courage 
You can easily accept the request for changing 18 to 20 of black 6558. I gave
you everything you need.
I also received this week a new box-opened version that I bought few weeks ago.
I can provide any information you need. Mine is the later version.
|
|
| Author: | randyf | | Posted: | Jun 29, 2020 00:18 | | Subject: | Re: Inventory Change Request for Set 8880-1 | | Viewed: | 26 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 20 Part 6558 Black Technic, Pin 3L with Friction Ridges Lengthwise (Alternate) (match ID 6)
* Delete 2 Part 6558 Black Technic, Pin 3L with Friction Ridges Lengthwise (Extra)
* Change {18 to 20} Part Black 6558 Technic, Pin 3L with Friction Ridges Lengthwise {match ID 6 to 0}
* Change 4 Part White 6540a Technic, Steering Arm Large with Wheel Hub Holder - Pin Connection {match ID 1 to 99}
* Change 4 Part Light Gray 6540b Technic, Steering Arm Large with Wheel Hub Holder - Axle Connection (Alternate) {match ID 1 to 99}
* Change 4 Part Light Gray 6540a Technic, Steering Arm Large with Wheel Hub Holder - Pin Connection (Alternate) {match ID 1 to 99}
* Change 4 Part White 6540b Technic, Steering Arm Large with Wheel Hub Holder - Axle Connection (Alternate) {match ID 1 to 99}
* Change 4 Part Light Gray 2736 Technic, Axle Tow Ball (Alternate) {match ID 4 to 99}
* Change 4 Part Black 6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball {match ID 4 to 99}
* Change 4 Part Black 2736 Technic, Axle Tow Ball (Alternate) {match ID 4 to 99}
|
There are a lot of pending requests for this set from multiple people. It is
one of the toughest scenarios that I have ever encountered and has been sitting
on the back burner for quite some time due to the difficulty. They will probably
sit for longer until I can muster up the courage to go through it. This is one
of the sets that was passed from one inventory admin to another to another...
Cheers,
Randy
|
|
| Author: | Admin_Russell | | Posted: | Jun 28, 2020 23:56 | | Subject: | Re: Inventory Change Request for Set 8880-1 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
|
|
BrickLink
ID CardAdmin_Russell
|
Location:  USA, California |
| Member Since |
Contact |
Type |
Status |
| May 9, 2017 |
 |
Admin |
|
|
| BrickLink Administrator |
|
| In Inventories Requests, SezaR writes:
| | In Inventories Requests, Admin_Russell writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 20 Part 6558 Black Technic, Pin 3L with Friction Ridges Lengthwise (Alternate) (match ID 6)
* Delete 2 Part 6558 Black Technic, Pin 3L with Friction Ridges Lengthwise (Extra)
* Change {18 to 20} Part Black 6558 Technic, Pin 3L with Friction Ridges Lengthwise {match ID 6 to 0}
* Change 4 Part White 6540a Technic, Steering Arm Large with Wheel Hub Holder - Pin Connection {match ID 1 to 99}
* Change 4 Part Light Gray 6540b Technic, Steering Arm Large with Wheel Hub Holder - Axle Connection (Alternate) {match ID 1 to 99}
* Change 4 Part Light Gray 6540a Technic, Steering Arm Large with Wheel Hub Holder - Pin Connection (Alternate) {match ID 1 to 99}
* Change 4 Part White 6540b Technic, Steering Arm Large with Wheel Hub Holder - Axle Connection (Alternate) {match ID 1 to 99}
* Change 4 Part Light Gray 2736 Technic, Axle Tow Ball (Alternate) {match ID 4 to 99}
* Change 4 Part Black 6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball {match ID 4 to 99}
* Change 4 Part Black 2736 Technic, Axle Tow Ball (Alternate) {match ID 4 to 99}
|
This set has been on my list of "tough things to figure out" for a long time
now. I don't think it is possible to use match ID 99 in this case.
|
I figured this, but maybe it is better to include match ID 99 and an extra note
for the three versions(maybe four?) of the insturcitons we know exist.
As it is now, the extra note refers to match ID 99 but there is none in the current
inventory.
|
I removed the mention of MID 99 in the note. It was there because a standard
format was used for the notes in all of these "redesign" cases and it just slipped
through.
|
|
| Author: | SezaR | | Posted: | Jun 28, 2020 23:53 | | Subject: | Re: Inventory Change Request for Set 8880-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Admin_Russell writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 20 Part 6558 Black Technic, Pin 3L with Friction Ridges Lengthwise (Alternate) (match ID 6)
* Delete 2 Part 6558 Black Technic, Pin 3L with Friction Ridges Lengthwise (Extra)
* Change {18 to 20} Part Black 6558 Technic, Pin 3L with Friction Ridges Lengthwise {match ID 6 to 0}
* Change 4 Part White 6540a Technic, Steering Arm Large with Wheel Hub Holder - Pin Connection {match ID 1 to 99}
* Change 4 Part Light Gray 6540b Technic, Steering Arm Large with Wheel Hub Holder - Axle Connection (Alternate) {match ID 1 to 99}
* Change 4 Part Light Gray 6540a Technic, Steering Arm Large with Wheel Hub Holder - Pin Connection (Alternate) {match ID 1 to 99}
* Change 4 Part White 6540b Technic, Steering Arm Large with Wheel Hub Holder - Axle Connection (Alternate) {match ID 1 to 99}
* Change 4 Part Light Gray 2736 Technic, Axle Tow Ball (Alternate) {match ID 4 to 99}
* Change 4 Part Black 6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball {match ID 4 to 99}
* Change 4 Part Black 2736 Technic, Axle Tow Ball (Alternate) {match ID 4 to 99}
|
This set has been on my list of "tough things to figure out" for a long time
now. I don't think it is possible to use match ID 99 in this case.
|
I figured this, but maybe it is better to include match ID 99 and an extra note
for the three versions(maybe four?) of the insturcitons we know exist.
As it is now, the extra note refers to match ID 99 but there is none in the current
inventory.
|
|
| Author: | Admin_Russell | | Posted: | Jun 28, 2020 23:50 | | Subject: | Re: Inventory Change Request for Set 8880-1 | | Viewed: | 33 times | | Topic: | Inventories Requests | |
|
|
BrickLink
ID CardAdmin_Russell
|
| Location: USA, California |
| Member Since |
Contact |
Type |
Status |
| May 9, 2017 |
|
Admin |
|
|
| BrickLink Administrator |
|
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 20 Part 6558 Black Technic, Pin 3L with Friction Ridges Lengthwise (Alternate) (match ID 6)
* Delete 2 Part 6558 Black Technic, Pin 3L with Friction Ridges Lengthwise (Extra)
* Change {18 to 20} Part Black 6558 Technic, Pin 3L with Friction Ridges Lengthwise {match ID 6 to 0}
* Change 4 Part White 6540a Technic, Steering Arm Large with Wheel Hub Holder - Pin Connection {match ID 1 to 99}
* Change 4 Part Light Gray 6540b Technic, Steering Arm Large with Wheel Hub Holder - Axle Connection (Alternate) {match ID 1 to 99}
* Change 4 Part Light Gray 6540a Technic, Steering Arm Large with Wheel Hub Holder - Pin Connection (Alternate) {match ID 1 to 99}
* Change 4 Part White 6540b Technic, Steering Arm Large with Wheel Hub Holder - Axle Connection (Alternate) {match ID 1 to 99}
* Change 4 Part Light Gray 2736 Technic, Axle Tow Ball (Alternate) {match ID 4 to 99}
* Change 4 Part Black 6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball {match ID 4 to 99}
* Change 4 Part Black 2736 Technic, Axle Tow Ball (Alternate) {match ID 4 to 99}
|
This set has been on my list of "tough things to figure out" for a long time
now. I don't think it is possible to use match ID 99 in this case.
|
|
| Author: | SezaR | | Posted: | Jun 28, 2020 23:32 | | Subject: | Inventory Change Request for Set 8880-1 | | Viewed: | 68 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 20 Part 6558 Black Technic, Pin 3L with Friction Ridges Lengthwise (Alternate) (match ID 6)
* Delete 2 Part 6558 Black Technic, Pin 3L with Friction Ridges Lengthwise (Extra)
* Change {18 to 20} Part Black 6558 Technic, Pin 3L with Friction Ridges Lengthwise {match ID 6 to 0}
* Change 4 Part White 6540a Technic, Steering Arm Large with Wheel Hub Holder - Pin Connection {match ID 1 to 99}
* Change 4 Part Light Gray 6540b Technic, Steering Arm Large with Wheel Hub Holder - Axle Connection (Alternate) {match ID 1 to 99}
* Change 4 Part Light Gray 6540a Technic, Steering Arm Large with Wheel Hub Holder - Pin Connection (Alternate) {match ID 1 to 99}
* Change 4 Part White 6540b Technic, Steering Arm Large with Wheel Hub Holder - Axle Connection (Alternate) {match ID 1 to 99}
* Change 4 Part Light Gray 2736 Technic, Axle Tow Ball (Alternate) {match ID 4 to 99}
* Change 4 Part Black 6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball {match ID 4 to 99}
* Change 4 Part Black 2736 Technic, Axle Tow Ball (Alternate) {match ID 4 to 99}
|
|
| Author: | spacecaptain | | Posted: | Jun 28, 2020 21:54 | | Subject: | sw0527a r2-d2 misprint? | | Viewed: | 113 times | | Topic: | Inventories | | Status: | Open | |
|
| has anyone seen this? the head is rotated 45 degrees. it came in 75257. i
can't find any pictures anywhere.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
Belgium
France, Nouvelle-Aquitaine
Germany, Brandenburg
)
)
United Kingdom, England
Canada, British Columbia
Czech Republic, Moravskoslezský Kraj
Netherlands, Noord-Holland
