Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | Cava03  | | Posted: | May 26, 2020 09:14 | | Subject: | caricamento di massa | | Viewed: | 22 times | | Topic: | Catalog | | Status: | Open | |
|
| Ciao a tutti, sono nuovo del sito ed avrei bisogno di aiuto..
volevo aprire un negozio ed inserire i pezzi lego tramite caricamento di massa,
premetto che il mio inventario l'ho fatto tramite rebrickable. quando provo
ad inserirlo mi da errore perchè non è inserito il prezzo o la quantità o l'
ID...Qualcuno di voi può aiutarmi?c'è un metodo più veloce?
Grazie a tutti in anticipo
|
 |
| Author: | Miro78 | | Posted: | May 25, 2020 11:40 | | Subject: | Need of Plate/Tile Round Modified categories | | Viewed: | 57 times | | Topic: | Catalog | | Status: | Open | |
|
| If this is on the Catalog roadmap, my apologies, but I am noticing some logic
discrepancies on how some of these parts are allocated to their current categories.
Fo obvious reasons, part 25269 (Tile, Round 1 x 1 Quarter) is in the Tile Round
category, because 4 of these makes a nice circle shape.
Therefore I am assuming Part 24246 (Tile, Modified 1 x 1 Half Circle Extended
(Stadium)) is in the Tile Modified category because it's irregular and makes
no circle shape, despite one side being round.
Yet part 39739 (Tile, Round 1 x 1 Heart) is in the Tile Round category, despite
the fact that it makes no circular shape (clover leaf shape at best). To me,
they should either be in the Tile Round or Tile Modified as it's confusing
things.
There are other parts in the Tile Round category which are clearly modified like
This is also true for Plate Round category items. Perhaps it's time to create
Plate Round Modified and Tile Round Modified categories. There may be reason
for not doing this now, but things like this really bug me when searching for
parts where my logic fails to find them, usually parts falling into 2 or 3 categories
due to vague nature of classification.
Miro
|
|
| Author: | Give.Me.A.Brick | | Posted: | May 24, 2020 21:23 | | Subject: | Why are these Hinges? | | Viewed: | 293 times | | Topic: | Catalog | | Status: | Open | |
|
| 1.
* | | 37494 Bar 3.6L Double with Angled Ends (Train Pantograph Shoe)
Parts: Bar |
There is no hinge in it.
I understand it is familiar with:
* | | 2922 Hinge Train Pantograph Shoe Locking with 2 Fingers
Parts: Hinge |
and
but there is no hinge.
If they belong together then they should be in Train category?
2.
Again I understand the familiarity with:
and
* | | 44572 Panel 2 x 4 x 3 1/3 with Double Locking 2 Fingers Hinge
Parts: Panel |
But again, there is no hinge. If they really have to belong together, maybe they
should be in Panel category?
Just my opinion, anyway. What do you reckon?
|
|
| Author: | Dimi_DBB | | Posted: | May 23, 2020 14:37 | | Subject: | item name for decorated counterparts | | Viewed: | 54 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi,
I was parting out a used set of and there are some counterparts missing
from the BL catalog.
Since I have them, I thought it might be a good idea to add them to the catalog.
But I'm kind of stuck on how to give them a proper name.
I have absolutely no idea what those stickers are supposed to represent.
Can someone give me a hint?
|
|
| Author: | Louloutte | | Posted: | May 22, 2020 18:38 | | Subject: | studio trans neon green dissapear | | Viewed: | 60 times | | Topic: | Catalog | | Status: | Open | |
|
| studio trans neon green dissapear !
whaaaaaaaaaaaat??? why this color dissapear ?
|
| Author: | iprice | | Posted: | May 22, 2020 16:37 | | Subject: | Catalog Weight of Sets - With/Without Boxes? | | Viewed: | 45 times | | Topic: | Catalog | | Status: | Open | |
|
| When looking at sets in the catalog the item info includes weight. Is this weight
of the model alone, once constructed or the full and complete set including packaging
and instructions?
Eg for the UCS B-Wing - Weight is stated as 2796g. What does this refer to exactly?
Cheers
BTW - I did do a quick search before asking this, but was overwhelmed with info
that had nothing to do with this question!
|
| Author: | gvbricks | | Posted: | May 22, 2020 04:06 | | Subject: | Is there a difference between 34987 and 24789 | | Viewed: | 97 times | | Topic: | Catalog | | Status: | Open | |
|
| What is the difference between
[p=34987]
and
[p=24789]
?
|
| Author: | Bricksonbricks7 | | Posted: | May 21, 2020 17:56 | | Subject: | Stickers: Space Shuttle Discovery (7470) | | Viewed: | 63 times | | Topic: | Catalog | | Status: | Open | |
|
| I was wondering, how can I go about finding the parts with the stickers? it looks
like some of the stickers are placed over multiple parts
|
|
| Author: | Miro78 | | Posted: | May 21, 2020 13:06 | | Subject: | Is dual color mold really decorated? | | Viewed: | 132 times | | Topic: | Catalog | | Status: | Open | |
|
| Should dual molded legs or arms in their respective assemblies really be considered
as decorated?
To me BL considered the decorated as by means of printing or applying decoration
using stickers.
example
the reasoning is, how is that any different from legs assembly with single color
legs but different color hips or mismatched leg colors?
I feel the same way about dual molded arms
There are reasons for not separating them, mainly for new buyers not knowing
or caring about the difference or just the general way of looking at it, but
I feel like there is no real definition for the term decorated that should be
defined. As far I am concerned, dual color molding is not really decorating.
Any thoughts?
Miro
|
|
| Author: | opposingwinds | | Posted: | May 20, 2020 08:22 | | Subject: | One random part... | | Viewed: | 143 times | | Topic: | Catalog | | Status: | Open | |
|
| Does anyone know why Brick Modified 1 x 2 x 2/3 No Studs, Wing End is
so expensive?? It's in more than 100 sets and I feel like it's quite
common. I came across several stores selling it for $1, even $2.
|
| Author: | joel07 | | Posted: | May 20, 2020 04:19 | | Subject: | Length of Electric, Wire and Connector 5306bc | | Viewed: | 42 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello, I would like clarification on the 5306bc electric, wire and connector.
The number next to it corresponds to the length of the cable, or is it the length
of the cable and the brick (for example 5306bc026) ?
Thank you for your answers.
Best regards,
Joel
|
| Author: | normann1974 | | Posted: | May 19, 2020 16:19 | | Subject: | Inventory for fabac3 | | Viewed: | 63 times | | Topic: | Catalog | | Status: | Open | |
|
| I would like to create an inventory for part just like part
has. But what part number should I use for the base?
/Jan
|
|
|
| Author: | Gaston.La.Brick | | Posted: | May 16, 2020 10:06 | | Subject: | Item 6468: problems? | | Viewed: | 62 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello,
the item 6468 is according to the catalog 1x3x4. This seems correct with the
picture.
However, it is referenced as being used in item 6460. That is not correct with
the dimensions.
I post a picture of the window/door that fits 6460. You can clearly see it fits,
but has other dimensions as item 6468.
|
| Author: | Brands_Bricks | | Posted: | May 15, 2020 19:10 | | Subject: | Lego pin 006 & 005 in different colors | | Viewed: | 91 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello,
It came to my attention that the following parts Pin006 & pin005 are only listed
in the color red. Although there are much more colors: green, blue, white, silver,
yellow and black. I hope these could be added!
Yours sincerely,
Hendrik Brands
|
|
|
| Author: | bengreen28 | | Posted: | May 15, 2020 16:56 | | Subject: | Part marked for deletion | | Viewed: | 94 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi, I have a 1x2 plate that has a sticker on it, I have gone to list it and have
found that it is marked for deletion because the sticker was applied to the wrong
part.
I have got this model at home and also have the instructions for it. the sticker
has been applied to the correct part as it shows it clearly on the instructions.
Who do we contact in order to get the deletion cancelled?
Part number is 3023pb01, you can see clearly in the picture that the sticker
is applied to the 1x2 plate and not the mudguard.
|
|
|
| Author: | Yo_Yo_Flamingo | | Posted: | May 15, 2020 10:39 | | Subject: | Can I see Imperial units for Catalog entries? | | Viewed: | 74 times | | Topic: | Catalog | | Status: | Open | |
|
| Is there any way for me to view the weight/dimensions of a set from its catalog
entry in Imperial units (pounds/inches- ghastly, I know, but I live in America)?
I commonly use this when quoting shipping for a buyer so I don't have to
dig out a set every time someone asks, but it is always a little bit of hassle
to convert grams to pounds and cm to inches.
|
|
| Author: | Soviet | | Posted: | May 15, 2020 09:26 | | Subject: | White sheep problem | | Viewed: | 111 times | | Topic: | Catalog | | Status: | Open | |
|
| Hey, I'm trying to help with the 21159 set, but it would be my first inventory
job, so I'm hitting a block early on.
It looks like the set has one of those:
but in white. Meanwhile, the name "Minecraft Sheep, White - Brick Built" is already
taken by:
which has a different build (plates instead of brick). What to do, I wonder?
|
|
| Author: | enig | | Posted: | May 13, 2020 16:26 | | Subject: | 2555 - even more variants | | Viewed: | 122 times | | Topic: | Catalog | | Status: | Open | |
|
| Happy day  The time that is spent differentiating between mold variants is
certainly not worth it money-wise, but worth it in other ways.
A customer purchased some classic 2555's. Apparently we still sent two different
variants to him. Sure, most of the older parts have various mini-differences,
just never thought anyone would actually care about getting a specific variant.
Either way, I was not aware of this particular difference.
Our customer described it as 'The wider ones and the narrower ones' and
sent us a picture, circling the different variants. A bit hard to see, I am attaching
one more.
The difference itself is in the sharpness of the outside/inside edges - the very
tops the clips. Principally kind of similar to the difference between classic
and modern 2555, except much more subtle. Difficult to judge if looking at the
edge itself, but becomes easy when comparing from the top view. At least when
you have two pieces to compare
The left one has, call it, completely sharp edge. The right one has a slight
roundness to it. That rounding comes at a cost of reducing the top surface area
of the clip.
Complete list of the differences between the two:
The 'flat top' type:
* Sharper edge / bigger top surface area of the clip
* mold pip on a side
* now looking from yet another side, the sidewall of the clip is completely straight
in all dimensions - does not get narrower towards the top and forms a straight
rectangle (the last picture)
The 'slightly slightly rounded top'
* Slightly rounded top edge of the clip, reduced flat surface area of the top
* mold pip at the bottom
* sidewall is of slightly concave shape - forms a trapezoid
Some more differences, but only concerns the construction of the mold and the
ejection pins placement.
Question(s).
1 - How many of you have/have not noticed this particular difference before?
Curious.
2 - any other different classic 2555s than these two?
|
|
|
| Author: | Zab3uk75 | | Posted: | May 10, 2020 11:22 | | Subject: | Minifig torsos no clutch | | Viewed: | 86 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi
Just wondering whether this is a different catalog number for torsos with no
clutch or would I need to mention this in my listing?
Thanks
Stay safe everyone
June
|
| Author: | biomajor09 | | Posted: | May 9, 2020 12:39 | | Subject: | Pieces and technique used | | Viewed: | 59 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi!
I am just starting to get into MOCs. Can anyone tell me what pieces they use
to hold up the flags?
Thanks so much!
|
|
|
|
| Author: | hpoort | | Posted: | May 3, 2020 10:06 | | Subject: | Ants | | Viewed: | 219 times | | Topic: | Catalog | | Status: | Open | |
|
| Except for the coloring, is there any difference between [p=62575cx1] and ?
Also, how do we go about numbering in such a case in general? 62575 is the LEGO
design number for the marbled version, 23714 for the plain version. Is the former
really seen as an assembly (cx1)?
I would suggest 62575cx1 renumbered to 23714pb01 and 62575 listed as an alternative
number. Before making such a request, I'd like to be sure about any differences
and guide lines.
And yes, Robert, I know the catalog team has different priorities right now,
but this one just came up and I wonder.
|
|
| Author: | BRCook | | Posted: | May 1, 2020 17:44 | | Subject: | Dimensions for instant checkout | | Viewed: | 45 times | | Topic: | Catalog | | Status: | Open | |
|
| I have had some issues with items not having size dimensions (particularly for
newer items - come up as 0x0x0 or ?x?x?).
This has caused me problems with instant checkout because even though there are
no dimensions it is not forcing a quote request (which is what I thought should
happen).
Anyone have any similar experiences or suggestions for a fix (Admins?)
Thanks in advance
Brendan
|
| Author: | skikyssing | | Posted: | May 1, 2020 04:50 | | Subject: | search | | Viewed: | 43 times | | Topic: | Catalog | | Status: | Open | |
|
| I'm not getting the suggestions in the drop down box when typing in searches
anymore...
It seems that this is for everyone.
Why do you have to change something that works perfectly? 
|
| Author: | BrickPhaisan | | Posted: | Apr 30, 2020 08:03 | | Subject: | Help with this color | | Viewed: | 61 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello, I am new here and I have a problem with part 3002, since I have two parts
of this color that I do not know very well how to classify. Let's see if
someone knows how to tell me what color it is? to me it looks blue-purple.
Thanks in advance
|
|
| Author: | normann1974 | | Posted: | Apr 30, 2020 07:06 | | Subject: | Set 1775 alternative stickers | | Viewed: | 60 times | | Topic: | Catalog | | Status: | Open | |
|
| I've just added [P=4867pb24] in hope that it will be accepted. Here's
a photo of the set. It's not mine, so I can't prove anything about it.
The building instructions are generic.
/Jan
|
|
| Author: | POPS_BLOCK_SHOP | | Posted: | Apr 29, 2020 15:59 | | Subject: | 75149 need sticker counter parts added | | Viewed: | 47 times | | Topic: | Catalog | | Status: | Open | |
|
| Looked up set 75149 Star Wars and there are no counter parts for the stickers.
How can these be added? I have all of them.
|
| Author: | yorbrick | | Posted: | Apr 29, 2020 09:00 | | Subject: | 3626cpb2463 Fright knight head | | Viewed: | 57 times | | Topic: | Catalog | | Status: | Open | |
|
|
* | | 3626cpb2463 Minifigure, Head Alien Female Bright Light Blue Long Eyelashes and Cheek Lines, White Eyes, Blue Open Mouth Smile with Teeth Parted and Fangs Pattern - Hollow Stud
Parts: Minifigure, Head |
I notice the head of the Fright Knight from CMF S19 is listed as female. Has
LEGO ever confirmed that this character is meant to be female? I couldn't
find the online bios like they used to do.
|
|
| Author: | StormChaser | | Posted: | Apr 28, 2020 13:02 | | Subject: | City Beautification Project | | Viewed: | 132 times | | Topic: | Catalog | | Status: | Open | |
|
| Thanks to new functionality from BrickLink we've added hundreds of large,
high-quality additional images for City sets during the past three weeks. These
images are now available for most City sets from 2010-2020.
The actual set images weren't updated, unfortunately, but the additional
images are amazing. I've included representative samples from each year
below. The additional images can be viewed by clicking on any set image, but
the set entry must be visited to zoom in and appreciate the true image quality.
Enjoy!
|
|
| Author: | BricksThatStick | | Posted: | Apr 27, 2020 18:59 | | Subject: | Assistance Needed with 9V Battery Box Images | | Viewed: | 74 times | | Topic: | Catalog | | Status: | Open | |
|
| If anyone out there can help with some images for the catalog it would be greatly
appreciated:
Randy and SezaR are in the process of simplifying the 9V battery box inventories.
https://www.bricklink.com/message.asp?ID=1189975
The box part without the bottom cover for some of these have kindly been submitted
by SezaR here:
https://www.bricklink.com/v2/catalog/catalogImagePendingApproval.page?uID=552064&catID=411&catType=P
Thats the top part of these 3 complete boxes:
But now we need a favor from the community...
If any of you has any of these below and can submit an image of them without
the bottom battery cover then we can add a complete set of these at once and
its all nice and neat
If you can please maintain the orientation of the box with the existing images
and have it against a white background if possible:
The top box of this one:
Will be this entry:
The top box of this one:
Will be this entry:
The top box of this one:
Will be this entry:
The top box of this one:
Will be this entry:
The top box of this one:
Will be this entry:
The top box of this one:
Will be this entry:
Many thanks in advance
|
|
| Author: | Rus_Numis | | Posted: | Apr 25, 2020 18:30 | | Subject: | Pending items in catalog | | Viewed: | 70 times | | Topic: | Catalog | | Status: | Open | |
|
| How long does it usually take for item to be finally added to Catalog when it
is in "Pending" status? I tried to add a few items released in 2020 in my store
but I didn't find them in Catalog. When I tried to add an item I got notified
that this item is already in Catalog but pending approval. It's been a week
now since my attempt and items still not there.
|
|
| Author: | StormChaser | | Posted: | Apr 24, 2020 10:35 | | Subject: | Item Type Discussion | | Viewed: | 307 times | | Topic: | Catalog | | Status: | Open | |
|
| We're considering the possibility of updating the page defining item types
on June 1st when we add the new category definitions.
Please take a look at the difference between the existing page:
https://www.bricklink.com/help.asp?helpID=170
and the proposed update:
https://www.bricklink.com/help.asp?helpID=2487
Are there any items in the catalog that still aren't addressed by the new
page? Put differently, what can you find in the catalog for which classification
by item type is still unclear when going by the definitions on the new page?
On the definition for figures: yes, I know that is very vague and could need
work.
Thanks in advance for any feedback.
|
|
| Author: | tonnic | | Posted: | Apr 23, 2020 11:23 | | Subject: | What does undetermined means in this case. | | Viewed: | 113 times | | Topic: | Catalog | | Status: | Open | |
|
| If I have this part in hands, plate modified 1x2 with 1 stud jumper undetermined
bottom type.
https://www.bricklink.com/v2/catalog/catalogitem.page?P=3794#T=C
What does this means when selling this piece? Is it the lazy way of selling this
piece, or the way to sell it if you do not know the differences?
Is it the sort of term I can use when I do not know if it has a groove or not,
does or does not have a bottom stud holder?
In fact, if I sell a part like this, does it means I sell it in the way: I don’t
know, buy it an expect 1 of the 3 different types that are mentioned as related
items?
If not the above mentioned, what does this type of modifies plate looks like?
What can a buyer expect when they buy it?
|
|
| Author: | starbeanie | | Posted: | Apr 23, 2020 10:05 | | Subject: | Instructions | | Viewed: | 135 times | | Topic: | Catalog | | Status: | Open | |
|
| Why aren't there separate catalog entries for the US vs. Foreign instructions
on set entries? They have different id codes printed on them. Lego differentiates
between them if you are reprinting them.
Print Versions
Building instructions labeled "NA" or "V39" may be printed on US standard letter
size paper
Building instructions labeled "IN" or "V29" may be printed on EU standard A4
paper
|
| Author: | bje | | Posted: | Apr 23, 2020 08:41 | | Subject: | Images/Renders Part 4447 | | Viewed: | 73 times | | Topic: | Catalog | | Status: | Open | |
|
|
I have one of these from but mine have all 4 studs as solid studs
and no hollow studs. Are the renders for this part correct or is mine an undocumented
variant?
|
|
| Author: | BricksThatStick | | Posted: | Apr 21, 2020 18:41 | | Subject: | Torso and Leg Assemblies Categories Split | | Viewed: | 90 times | | Topic: | Catalog | | Status: | Open | |
|
| Project number 8 from the Catalog Roadmap: Torso and Leg Assemblies Categories
Split
This has now been completed
The legs categories have just been done so although they show up in the main
list of categories they will not show as a separate category in storefronts until
the daily maintenance later.
https://www.bricklink.com/catalogTree.asp?itemType=P
The torsos were completed a few days ago so are already showing up correctly
in stores.
Hopefully that will make it easier for yoy when browsing the categories or looking
for non decorated parts when searching or listing parts for sale.
Paul.
(still remains project number 8 - I'll edit the page shortly)
|
|
| Author: | StormChaser | | Posted: | Apr 21, 2020 03:57 | | Subject: | Brick Built | | Viewed: | 111 times | | Topic: | Catalog | | Status: | Open | |
|
| I hear that it's now possible to locate brick-built creatures in the catalog
simply by searching for "brick built." I don't know how helpful that will
be, but I thought it was worth mentioning.
|
|
| Author: | runner.caller | | Posted: | Apr 20, 2020 16:33 | | Subject: | Request of the Catalog Admins. | | Viewed: | 112 times | | Topic: | Catalog | | Status: | Open | |
|
|
I remember the first time I came across this figure, I searched "devil" and nothing
came up in the search because the figure name back then was...
"Imp - Minifigure only Entry"
So I thought, "well, I wouldn't call it an "Imp" but I'll remember that
going forward"
Then, I encountered it again more recently and searched "Imp" only to find no
results again because the figure name is now...
"Cute Little Devil - Minifigure only Entry"
When making a change to an item name, can the old name be left as part of the
name when possible/ feasible so that users can find a figure/part that they took
the time to memorize?
|
|
| Author: | YoYo0663 | | Posted: | Apr 20, 2020 12:14 | | Subject: | MBA set 20200 | | Viewed: | 60 times | | Topic: | Catalog | | Status: | Open | |
|
| Howdy folks, I'm looking for some info.
Like many others I have taken the self-isolation as an opportunity to go through
my LEGO storage. I have come across an oddity. LEGO released the Master Builder
Academy line back around 2011. Originally it could only be found in the USA
so I would pick up the latest sets as I found them on vacation. Somehow I managed
to buy the first set 20200: Space designer, twice. The thing is, they are in
two totally different boxes. Both are sealed, same parts count, same name.
But the box art is vastly different. I'm curious if there is a rarity to
one vs the other or do they essentially have equal value?
Anyone out there familiar with this variation?
Cheers,
Stephen
|
|
| Author: | StormChaser | | Posted: | Apr 19, 2020 14:16 | | Subject: | Move Variants Discovered | | Viewed: | 201 times | | Topic: | Catalog | | Status: | Open | |
|
| I just added comparison photos and additional notes for the following part variants
I've recently discovered. All of these variants were undocumented on BrickLink
until today:
[P=3046a]
|
|
| Author: | crepundi | | Posted: | Apr 19, 2020 08:38 | | Subject: | ... and another road sign variant | | Viewed: | 56 times | | Topic: | Catalog | | Status: | Open | |
|
| I also found two different versions of
on the left the pattern is just printed, on the right it is embossed. Maybe this
could be noted in the description.
|
|
| Author: | SezaR | | Posted: | Apr 19, 2020 00:54 | | Subject: | Varaitions of window 29 | | Viewed: | 74 times | | Topic: | Catalog | | Status: | Open | |
|
| There are four variations, well indeed five
The four variations I gave have hollow studs.
1) extended lip, fixed glass
2) extended lip, removable glass
3) short lip, removable glass,
4) short lip, no glass (the part above but without glass)
How do we name these variations and what Id should we use for them?
|
|
| Author: | chetzler | | Posted: | Apr 18, 2020 17:39 | | Subject: | Series 20 figs and images are ready! | | Viewed: | 73 times | | Topic: | Catalog | | Status: | Open | |
|
| | All sets and images are ready for approval tomorrow! |
| Author: | chetzler | | Posted: | Apr 18, 2020 15:31 | | Subject: | Anyone else working on series 20 figs? | | Viewed: | 69 times | | Topic: | Catalog | | Status: | Open | |
|
| I see that only the random fig and the complete set of 16 entries are pending
approval.
I have nearly a whole box of this series so I was going to work on adding the
set entries and images unless someone else is already at work on it. I'm
hoping to list a bunch of the extras as soon as they are approved (hopefully
tomorrow on the release date...fingers crossed 
There are are better photographers than me out there but I can certainly get
a decent image if no one else is working on them.
-Chris
|
|
| Author: | StormChaser | | Posted: | Apr 17, 2020 21:50 | | Subject: | Worm Gear Ratio | | Viewed: | 88 times | | Topic: | Catalog | | Status: | Open | |
|
| We have a pending change request for the additional note on this part:
The member says the gear ratio is 20:1, not 24:1. We'd appreciate input
from anyone with knowledge of this part.
|
|
| Author: | JRBricks | | Posted: | Apr 17, 2020 13:59 | | Subject: | Condition(s) for Used Items | | Viewed: | 104 times | | Topic: | Catalog | | Status: | Open | |
|
| Not sure if this has been brought up before, but is there a possibility to have
more options for listing used items? For example, I was shopping around for a
few hard to find, relatively expensive minifigs and in searching I notice from
lowest price to highest the Used ones of course are usually listed first, and
I appreciate sellers putting descriptions to help out, but most listings under
Used simply don't have more details. Especially if we are all using stock
photos, it's hard to discern between used minifigs when all have the same
stock photo and just listed under "used." Honestly, I just don't take a chance
on those and look for used with a description that has "like new" or "adult owner,
never played with" "displayed only" "great condition." etc.
Again, sellers have to type in those descriptions, but can there be options such
as "used - like new" "used - heavy playwear" etc. to give more accurate listings?
I guess a store's front page can be a good place to generally describe your
items too. Just a thought and if it's easier like it is then so be it and
I will advise sellers to try to give good descriptions for used expensive items
|
|
| Author: | Hygrotus | | Posted: | Apr 16, 2020 16:41 | | Subject: | Adding stickered parts - tutorial | | Viewed: | 1290 times | | Topic: | Catalog | | Status: | Open | |
|
| Some time ago I crated this
https://www.bricklink.com/message.asp?ID=1085264
as I heard from some users it was helpful.
So today I wanted to present to Bricklink community updated version.
This is the first try of making video tutorial for Bricklink. I decided to create
tutorial about stickered counterparts as they are freqently problematic for users
how
to add them.
There are two parts of the
part 1
shows how to submit such part to the catalog (ca.20 min long)
https://drive.google.com/open?id=1JqkgN1IsqB_hBGn_Vh61Pb4YqwUiTtLp
part 2
shows how to add such part to an existing inventory (ca. 4 min long)
https://drive.google.com/open?id=1---YraPzshF26aTdR9CiPi-TVqdyTIsU
I hope they will be helpful.
Please share yout thought about them. Do you like them? Are they helpful? Do
you want more, if yes about what?
or maybe you don't like then and they are not needed.
I know first one is quite a long (20 min) but wanted to slowly and thoroughly
show process on two examples from one set and even there I didn't showed
or possible cases (so wideo could be longer )
So are such long videos are ok or should be shorter.
All inputs are appreciated. We can do more in that way if needed.
|
|
| Author: | oasis | | Posted: | Apr 16, 2020 10:51 | | Subject: | part 32193 tire | | Viewed: | 56 times | | Topic: | Catalog | | Status: | Open | |
|
| the current description includes the word "flat" but this tire has tread
the current description does NOT include size, as most tires do
the tire itself DOES have the part number on it, so I know I'm addressing
the correct tire
thanks
|
|
| Author: | StormChaser | | Posted: | Apr 15, 2020 22:15 | | Subject: | Category Definitions Discussion | | Viewed: | 260 times | | Topic: | Catalog | | Status: | Open | |
|
| As part of the larger roadmap project of updating catalog guidelines, we anticipate
making this page official on or before June 1st, 2020:
https://www.bricklink.com/help.asp?helpID=2479
Your feedback is critically important. Once this page is official we will be
open to moving items from one category to another as necessary. The implementation
of these category definitions will also allow the launch of the Part Reclassifications
project from the roadmap.
Please take the time to look over this page and provide feedback. We are open
right now to changing anything on the page and will carefully consider all feedback.
This page is not fully finished and will be undergoing continual revisions between
now and the time it's implemented. Some questions to consider as you look
through the page:
Do the definitions do their job?
Imagine a part you'd like to see placed into another category. Do the definitions
of the existing category for the part and the category where you'd like to
see the part moved fully explain the necessity for the move?
Is the page structured well?
We are working on a heading that will allow quick navigation to each section.
It will be added soon. Beyond that, is the page confusing or difficult to understand?
Will this page solve problems or add to them?
This page will affect the future direction of the catalog to some degree. Will
it be a positive or negative effect? Will this page help to resolve problems
regarding where items should go?
Keep in mind that this page does not address item types (sets vs. gear, for example).
That will be a separate update. For now we're just trying to define what
existing categories should contain.
|
|
| Author: | Andrsv | | Posted: | Apr 15, 2020 16:19 | | Subject: | Thanks for your feedback - avsearch is back | | Viewed: | 241 times | | Topic: | Catalog | | Status: | Open | |
|
| Thanks for your feedback in private messages guys
Bricklink recently moved all torsos with pattern into a new category, which resulted
in avsearch not finding them.
I've fixed it now by adding an option for plain/decorated torsos. Enjoy:
http://avbricks.no/#/avSearch
avSearch is based on goatleg by 62Bricks with some additional input from mfav.
For your information, the new nougat colors are not yet fixed, but I am aware
of the issue.
I'm considering to take my store from being a hobby into something more,
and would love to get some feedback. I am planning to find out how much it costs(how
many hours) to sort and register used-bulk-lots. Did anyone measure or research
how much time you spend to sort bulk lego, and what is the best strategy? My
current strategy is:
1) sort everything into 10 self-made categories
2) sort each category into specific pieces or narrower categories
3) repeat previous step until everything is sorted by specific pieces
4) sort each specific piece by color
5) Add to my inventory.
I plan to check kg/minute speed for each of my steps.
|
|
| Author: | wyvern | | Posted: | Apr 15, 2020 14:56 | | Subject: | Decorated vs plain should be applied to legs | | Viewed: | 91 times | | Topic: | Catalog | | Status: | Open | |
|
| I noticed that Minifigure torsos have now been split up into decorated and plain,
which is pretty handy. Is more subdividing on the way with other categories like
legs? I always have a hard time finding the right pair of plain legs.
|
| Author: | AZbrickGUY | | Posted: | Apr 14, 2020 23:22 | | Subject: | Minifig Series 20? | | Viewed: | 105 times | | Topic: | Catalog | | Status: | Open | |
|
| These going to be added anytime soon? I complete my set a month ago here in the
US.
|
| Author: | stecre | | Posted: | Apr 14, 2020 06:19 | | Subject: | Big Figure names | | Viewed: | 131 times | | Topic: | Catalog | | Status: | Open | |
|
| I may have missed a discussion but was there a specific reason why all the big
figures have been renamed as "Big Figure - NAME"
e.g.
Would it not have been better to be "NAME (Big Figure)" so that they still appear
in the correct alphabetic order in their respective categories?
|
|
| Author: | Bricklanta | | Posted: | Apr 13, 2020 19:43 | | Subject: | Programmatically download Part or Set Lists | | Viewed: | 109 times | | Topic: | Catalog | | Status: | Open | |
|
| I'm new to the Bricklink ecosystem, including selling. I've gotten the
Store API up and running to help drive my personal inventory software and replace
the Rebrickable API I've been using up until now. Because Bricklink maintains
records for parts with sticker and for assembled minifigs this switch is critical
for me.
However I'm running into one roadblock - how to programmatically download
the full Part List and Set List. I see in the API docs that the only Lists I
can access are colors and categories. But for items I seem to need to specify
the item number.
I have manually downloaded part list and set list from the Downloads page but
I can't figure out how to do that using code.
I've noticed that the program BrickStock updates its database automatically
which makes me think it's possible to do. Is it?
|
|
| Author: | James2506 | | Posted: | Apr 13, 2020 17:07 | | Subject: | Why oh why Batman Sh016b | | Viewed: | 133 times | | Topic: | Catalog | | Status: | Open | |
|
| Please help. I don’t understand the apparent randomness of the abbreviated naming
rules for minifigures. I collect DC superheroes - specifically anything in a
Batman set. Back many years ago Batman Sh016 had a type 1 cowl. Shortly after
Lego released a type 2 cowl variant and this entered the catalogue as Sh016b.
And now in 2019 as part of the Gotham comic con scene and a magazine exclusive
they release With a sponge cape and this is now Sh016b. This is inconsistent
with other naming conventions. Which is right? For example the first repeat
in the Batman theme was the riddler Bat017. Then he got released with a jet
pack but identical figure and that was Bat023. So should the same figure but
with an accessory variant be a brand new number in the theme or should it be
an a/bc??
|
|
| Author: | sebastianlego | | Posted: | Apr 13, 2020 06:23 | | Subject: | set 558 - counter part drum with sticker | | Viewed: | 83 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi
I just discovered, that I'm in possess of drum with sticker from set 558,
not 6361.
I compared both stickers and they are different. Please create new counter part
number for 37037 part.
Sebastian
|
|
|
| Author: | Venusia_Bricks | | Posted: | Apr 12, 2020 11:40 | | Subject: | Set 7171 Minifig SW0017 | | Viewed: | 114 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello
Question, about adding some additnal change on a minifig in a set.
I'm starting to sell some old sets, in this case 2 sets of 7171.
I have seen that in both sets minifig SW0017 doesn't have DG color hips but
LG Hips.
Both Sets are original with boxes en inner boxes.
So the first one I didn't understand why Jar Jar had different color legs;
but on parting out the 2nd the same color so my guess is that Jar Jar SW0017
also
can have LG hips.
How to proof or change/add to the part list as adittional minifig?
Thanks & Keep Safe
Flander Bricks
|
|
| Author: | Autour | | Posted: | Apr 11, 2020 06:53 | | Subject: | 3830c01 Hinge Brick 1 x 4 marked for deletion | | Viewed: | 505 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi,
The reason why 3830c01 Hinge Brick 1 x 4 Swivel is marked for deletion is not
justified IMHO ("it sets a precedent for adding dozens of unnecessary combinations
of hinges").
I don't think anyone has the intention to create colour-combinations for
these two parts combined.
Most sellers just want to sell the two parts together to avoid unequal (worthless)
quantities of the underlying parts.
So can this decision be undone please so that new items can be listed?
Best regards,
Kris - Autour des Briques
|
|
| Author: | Stuart9 | | Posted: | Apr 9, 2020 12:15 | | Subject: | Another shade /colour variation | | Viewed: | 76 times | | Topic: | Catalog | | Status: | Open | |
|
| Part 15107 in two shades of trans blue, only trans light blue known in sets but
trans medium blue listed for sale.
Thought I'd just confirm there are variations/different trans blues.
Info only.
|
|
| Author: | AnthonyH | | Posted: | Apr 8, 2020 06:40 | | Subject: | 20mm high figures | | Viewed: | 135 times | | Topic: | Catalog | | Status: | Open | |
|
| Do you list Lego 20mm high figures?
(They are marked "Lego" inside the stud hole at the top)
|
| Author: | cosmicray | | Posted: | Apr 7, 2020 09:11 | | Subject: | Game set boxes | | Viewed: | 77 times | | Topic: | Catalog | | Status: | Open | |
|
| This is a secondary concern, also having to do with Games being listed under
Gear.
In the case of G3853, there are a number of sellers trying to sell the empty
box. But Gear does not allow for listing Original Boxes, only Instructions. Therefore,
they are listing them under the primary set listing.
Can anything be done about this shortcoming in Gear ? I know that in Sets, it
is variable if a Set has Instructions or not. The same may apply within Gear
for Boxes.
Nita Rae
|
|
| Author: | Autour | | Posted: | Apr 6, 2020 13:50 | | Subject: | 3024 plate 1x1 metallic gold : does it exist? | | Viewed: | 131 times | | Topic: | Catalog | | Status: | Open | |
|
| Does 3024 plate 1x1 exist in Metallic Gold?
I do have some examples in front of me (genuine parts) that don't look at
all as Pearl Gold but do look as Metallic Gold. But the latter is not featured
as a known colour.
Can someone else confirm the existence of 3024 in Metallic Gold?
And if so, please add it to the catlogue as a known colour!
|
|
|
| Author: | normann1974 | | Posted: | Apr 5, 2020 18:59 | | Subject: | Which stickered parts use variants? | | Viewed: | 59 times | | Topic: | Catalog | | Status: | Open | |
|
| Working on inventory for set I was about to create the stickered counterpart
for the blue 1x2x1 panel with rounded corners, but I noticed that all stickered
counterparts for 1x2x1 panels are created as "4865pbXXX", ignoring which variant
of the panel it is. I guess sellers must specify it manually. On the other hand,
for the stickered 1x2x2 bricks, both variants of the brick exists as
and
* | | 3245bpb21 Brick 1 x 2 x 2 with Inside Axle Holder with Box and Arrows and Globe on Red Background Pattern (Sticker) - Set 7939
Parts: Brick, Decorated |
. Why this difference?
/Jan
|
|
| Author: | ForTheGirls | | Posted: | Apr 5, 2020 10:41 | | Subject: | scd001 and scd003 | | Viewed: | 77 times | | Topic: | Catalog | | Status: | Open | |
|
| There is an error in the catalog regarding the heads for referenced minifigs.
The catalog says both scd001 and scd003 have the same heads, however they are
different if you look at their faces in the catalog. Also, if you look up the
head numbers on both, it says that 2 minifigs have the same head: scd001 and
scd003, but they don't.
In actuality, scd001 has head number 3626cpd1379; scd003 has 3626cpd1375. When
you try to look up 3626cpd1375, the catalog references head 3626cbpb1379. You
cannot buy 3626cpb1375 on the market, it automatically looks up 3626cbp1379.
This is the first time I've found an error in the catalog. I want to buy
3626cpb1375. Will I be notified when the catalog is fixed?
Thank you,
Ms. Dale Kurtz
For The Girls
|
|
| Author: | grimsbricksuk | | Posted: | Apr 5, 2020 04:05 | | Subject: | Image added for SW Maul sw1091 | | Viewed: | 77 times | | Topic: | Catalog | | Status: | Open | |
|
| I have added an image for star wars minifig sw1091 (Maul), please approve when
ready.
Thanks.
|
| Author: | krazy_yvan | | Posted: | Apr 4, 2020 15:56 | | Subject: | Part 6553 | | Viewed: | 90 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello,
is this possible to ask for a description enhancement? The part 6553 for example
is just impossible to find without Jedi powers, it does not even have axle in
the name...
Is there a procedure for this kind of demand?
Thanks
|
| Author: | nicmare | | Posted: | Apr 3, 2020 09:27 | | Subject: | packaging dimensions for 81000-1 | | Viewed: | 52 times | | Topic: | Catalog | | Status: | Open | |
|
| the current dimensions are wrong:
262 x 188 x 44 cm
correct:
260x188x45 mm
|
| Author: | BrickenbergNC | | Posted: | Apr 3, 2020 02:04 | | Subject: | Possible New Item Number? | | Viewed: | 118 times | | Topic: | Catalog | | Status: | Open | |
|
| Not 100% sure how to submit this, but there may be a new item number for part
60471: Hinge Plate 1 x 2 Locking with 2 Fingers on Side. See the attached picture
from Lego.com.
|
|
| Author: | leopard37 | | Posted: | Mar 31, 2020 18:24 | | Subject: | Santa Porg | | Viewed: | 93 times | | Topic: | Catalog | | Status: | Open | |
|
| Is there a reason that this poor little fellow:
doesn't have his hat? I can add if no good reason.
Thanks,
Tyson.
|
|
|
| Author: | runner.caller | | Posted: | Mar 31, 2020 10:46 | | Subject: | Is there a plan to resurrect special assemlie | | Viewed: | 105 times | | Topic: | Catalog | | Status: | Open | |
|
| Any plan to resurrect special assemblies?
I came across a mostly complete
I didn't want to break the hulkbuster down so I decided I'd list him
on another site and oh boy...
Apparently said site has a new policy where buyers can request a cancellation
in the first hour.
Didn't see that message request and printed a label while I was in paypal
printing 10 other labels for bricklink.
Apparently, the action of printing a label automatically denies a buyer's
cancellation request.
Which is silly as I had no problem refunding since I hadn't shipped.
The other site would not let me cancel and refund through them. I got in contact
with CS and they said I had to refund through the paypal transaction since "I
denied the original request".
Then if I gave CS the paypal transaction, they would give me credit for the fees,
but I'm not holding my breath. I'm guessing they'll credit back the
final value fee, but I'm definitely out on the papal fees and the jury's
out on the sales tax.
Funny how THEY charge the buyer sales tax, and then when YOU give a full refund,
the sales tax portion gets refunded out of YOUR balance!?
Another funny thing is that paypal adds the sales tax that ebay collects to the
total and charges you 2.9% on that total. So you're paying a percent fee
on a percent tax collected by another entity..
I personally don't feel there should be sales tax on used items.
These days, that other site is about only good for buying and sorting out high
quality pcs to relist on this site.
So if special assemblies are a hassle with inventories, can we list partial components
of sets as "custom items"?
|
|
|
| Author: | Davemerz | | Posted: | Mar 30, 2020 13:52 | | Subject: | Help Id this torso | | Viewed: | 98 times | | Topic: | Catalog | | Status: | Open | |
|
| | White torso with black pattern, white arms and hands |
|
| Author: | Demiurge | | Posted: | Mar 29, 2020 05:07 | | Subject: | How to approve my change? | | Viewed: | 63 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi! I added a few Large Catalogs a week ago + added Images for this catalogs.
But they still have the status "Pending Approval". What can I do for approving
them?
|
| Author: | Leftoverbricks | | Posted: | Mar 29, 2020 04:24 | | Subject: | where to change weight of GEAR instructions? | | Viewed: | 33 times | | Topic: | Catalog | | Status: | Open | |
|
| | ^ |
| Author: | MD14 | | Posted: | Mar 28, 2020 21:26 | | Subject: | Help identify part | | Viewed: | 90 times | | Topic: | Catalog | | Status: | Open | |
|
| I have torso v neck blue overalls with white arms and wide stitch spacing on
overalls as seen in picture of listing cty0340.
However when i go into the parts of that listing the torso has a different tight
stitch spacing and the head post has the black part on it(mine does not have
this black mark either). I have looked and am unable to find any other pictures
or references.
I have 3 of them if that helps.
Wondering if anyone can identify the difference and what set i may have that
they specifically come from.
Thanks
Todd
|
| Author: | primadeluxe | | Posted: | Mar 28, 2020 05:11 | | Subject: | How to add weight and size of instructions? | | Viewed: | 46 times | | Topic: | Catalog | | Status: | Open | |
|
| | How can I do this? I can not find it ..... Thanks! |
| Author: | mokibricks | | Posted: | Mar 26, 2020 03:21 | | Subject: | Adding missing items to the catalog | | Viewed: | 76 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi,
I recently bought a holder for trading cards, and it has a list of all the possible
cards (SW Series 2) with their numbers. Does it help if I add all the items to
the catalog? I have a few more where I will also add the images of the cards,
but in many cases, I won't.
Thanks,
Tamas
|
|
| Author: | fooleeze | | Posted: | Mar 25, 2020 14:47 | | Subject: | ToysRUs & Barnes&Noble Build Event Sets | | Viewed: | 103 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello all, I've got several Toys R Us and Barnes & Noble build event sets
(May 4th promo events, etc). I don't see these sets in the Bricklink Catalog.
Is it possible to add those? (Can I submit them?) Or is this an area that
is not added to the catalog typically?
Thanks for your time!
Todd
|
| Author: | OliverM22 | | Posted: | Mar 24, 2020 18:31 | | Subject: | Store | | Viewed: | 95 times | | Topic: | Catalog | | Status: | Open | |
|
| If anyone has a store in the uk and has these parts in it let me know thanks.
I know it’s a very small order
|
|
| Author: | Bobflip | | Posted: | Mar 22, 2020 22:40 | | Subject: | Submitting counterparts without photographs | | Viewed: | 75 times | | Topic: | Catalog | | Status: | Open | |
|
| I've submitted a load of stickered counterparts for set 75877, unfortunately
I'm missing the following four parts so can't take photographs (and needed
to add them to the database to make them easier to find for sale!). The others
have been approved but not sure what to do for these ones?
6636pb214
54200pb095L
54200pb095R
54200pb096R
|
|
| Author: | crazylegoman | | Posted: | Mar 21, 2020 16:19 | | Subject: | Wheel plate stuck on car chassis piece | | Viewed: | 105 times | | Topic: | Catalog | | Status: | Open | |
|
| Does anyone know if
is meant to be able to be removed from
* | | 11650c01 Vehicle, Base 5 x 10 x 2 1/2 with Mudguards and 6 x 2 Recessed Center with 3 Holes with (Same Color) Wheels Holders Attached
Parts: Vehicle, Base |
once they are together?
I feel like the axles are going to snap off of the 2X2 plates if I pull any herder
than I already am. Also, I've never seen a post with a tapered part at the
end like the chassis piece has. It seems a bit like those Bionicle brains and
heads.
David
|
|
| Author: | Bendix | | Posted: | Mar 21, 2020 06:47 | | Subject: | How to add to the catalog? WM soccer team | | Viewed: | 61 times | | Topic: | Catalog | | Status: | Open | |
|
| I just came across of a set of 6 Legoland Sierksdorf postcards: 5 are showing
the German WM soccer team of 1974 on a visit a Legoland Sierksdorf (black and
white). The sixth one shows the entrance of Legoland Sierksdorf and on the back
there are autographs of the soccer team.
I only came twice across this set in a lot of years - add to the catalog as a
set or single?
Thanks for any advice
Beryll
|
|
| Author: | primadeluxe | | Posted: | Mar 21, 2020 06:32 | | Subject: | Difference 4170pb01 between set 7740 and 7745 | | Viewed: | 60 times | | Topic: | Catalog | | Status: | Open | |
|
| I think the sticker of part 4170pb01 for set 7745 is a little bit bigger, than
the sticker for set 7740. See image (below=7745; up=7740)
|
|
|
| Author: | Leftoverbricks | | Posted: | Mar 19, 2020 12:46 | | Subject: | Add paper flyers to set inventories | | Viewed: | 86 times | | Topic: | Catalog | | Status: | Open | |
|
| Quite a few of today's sets not only contain instructions (= booklets or
single sheets of paper) but also other paper items. These are included to promote
the product line or to provide information about what you can do with the set.
Currently there's no way to add these to a set inventory which means that
--as a seller-- you cannot sell a set as 'complete' until these
items are part of the catalogue inventory.
Example:
contains an instruction sheet https://www.bricklink.com/v2/catalog/catalogitem.page?I=41906-1#T=S&O={%22ss%22:%22NL%22,%22rpp%22:%2250%22,%22iconly%22:0}
and a leaflet/flyer --whatever you want to call it-- with building ideas
and a product overview.
For the above set I added this paper sheet to the catalogue under number 6317480.
I can't add a link to this item in the form of p=xxxx or whatever because
it's not supported in the macro tags. See https://www.bricklink.com/help.asp?helpID=1147
Also: this item is nowhere linked to the sets in which it appears.
StormChaser approved it with the item number 'm20dots' and description
'2020 Mini Dots (6317480)'. BTW: I don't think this is very helpful.
I think we need a way to add those paper leaflets to the inventory of a set.
There are two ways to do this:
1. make items like this a part of the inventory or
2. extend the current set description [set entry | instructions entry | box
entry] with '| other included items' or whatever you want
to call it.
|
|
| Author: | mfav | | Posted: | Mar 18, 2020 20:46 | | Subject: | Clips Ahoy, Part 2! Attention StormChaser | | Viewed: | 136 times | | Topic: | Catalog | | Status: | Open | |
|
| http://v4ei.com/brickref/clips-k-v.php
Some takeaway observations so far.
Catalog is inconsistent in how it treats variants.
- Sometimes there is one ID number for two different designs.
-- Sometimes these design differences are noted, other times not
- Sometimes there is one ID number plus a letter (1234a, 1234b, etc.) indicating
different designs
- Sometimes there is one ID number plus "alternate numbers" for a single design
-- Sometimes these alternate ID numbers are the same design
-- Sometimes these alternate ID numbers are a different design
I would suggest that 48729 and 48729b are functionally different designs.
I would suggest that 48729b is actually 41005, and 41005 is a later variant of
48729b.
21 unique clip shapes to this point.
Some clip shape differences are obvious and others are subtle. Many probably
can't be distinguished by most people, even upon close examination. Through
the process of photographing these elements, and bringing the actual 6mm size
up to somewhere around 180mm these differences become more apparent.
So the differences are now cataloged and you can deal with them or not as you
see fit.
There's probably another page or two to come, but this is pretty slow going.
|
|
| Author: | tpr | | Posted: | Mar 18, 2020 11:19 | | Subject: | Panel needs checking please | | Viewed: | 83 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi
* | | 4215pb003 Panel 1 x 4 x 3 with Blue, Red and Silver Space Mechanical Pattern on Inside (Sticker) - Set 6949 (Undetermined Type)
Parts: Panel, Decorated
Marked for Deletion |
I have this item with solid studs, so should be under 4215a
It is currently under 4215 which is undetermined.
Can anyone check the third picture - comes up too small for me, to see the studs
If they are solid, which I think they are, this wants re-assigning to a 4215a
number
Thanks
tpr
|
|
| Author: | stutrippant | | Posted: | Mar 17, 2020 14:42 | | Subject: | White bricks on a white background. | | Viewed: | 132 times | | Topic: | Catalog | | Status: | Open | |
|
| Seriously, what genius thought the best avatar brick in the catalog should be
white when the background is white too. So many hard to figure out bricks. Please
change all white avatar bricks to something more visible.
|
| Author: | Leftoverbricks | | Posted: | Mar 17, 2020 04:43 | | Subject: | Where can I submit product flyers | | Viewed: | 65 times | | Topic: | Catalog | | Status: | Open | |
|
| TLG is distributing general product flyers in sets within the same theme. For
example DOTS and Ninjago Arcade Pods. The flyers are all the same, so not specific
to a particular set.
Can I add those to the catalog? And where: book / gear / catalog / somewhere
else?
|
| Author: | Doodlebug | | Posted: | Mar 16, 2020 21:02 | | Subject: | p12cty01, 02, & 03 | | Viewed: | 49 times | | Topic: | Catalog | | Status: | Open | |
|
| Is there any printing on the reverse side of this 2012 series of posters? Acquired
some, but they have B/W smaller versions on the reverse.
|
| Author: | jonwil | | Posted: | Mar 15, 2020 19:58 | | Subject: | Question about part x168 | | Viewed: | 89 times | | Topic: | Catalog | | Status: | Open | |
|
| Can anyone tell me why is labeled as "underwater" when it has never
appeared in any underwater type sets?
Should it be renamed?
|
|
| Author: | axaday | | Posted: | Mar 14, 2020 16:03 | | Subject: | Silly to Consider This Sprue a Part? | | Viewed: | 154 times | | Topic: | Catalog | | Status: | Open | |
|
| I apologize for the quick lo-res pic, but I think a lot of people are familiar
with this piece. It's the sprue from [p=19807c01]. And it IS just a sprue.
But I was looking it over today before tossing it in the trash and it is a pretty
neat looking piece AND it was obviously designed with some play value, because
it fits on a stud. It has never been used in a set, I believe, but it is easy
for me to imagine it being useful in MOCs. Would it be silly to add it to the
catalog?
|
|
|
| Author: | 69transamman | | Posted: | Mar 14, 2020 00:18 | | Subject: | Parts 89650 & 60153 | | Viewed: | 62 times | | Topic: | Catalog | | Status: | Open | |
|
| The catalog has separate listing for parts 89652 & 60176, the only difference
being the open lower axle holes. For consistency shouldn't parts 89650 &
61053 have separate listings, they differ in the same way from each other.
Howard
|
|
| Author: | bouncingbear | | Posted: | Mar 11, 2020 22:02 | | Subject: | Faulty print box - 10218 Pet Shop. Custom? | | Viewed: | 130 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello
We have 2 sets with faulty print box of Pet Shop (front of box shows 1332 pieces
vs 2032 official) - as relative new to selling appreciate help how best to put
it into the store inventory? Should it be a custom item, or should it be 10218-1
with custom image?
Many thanks in advance
|
|
| Author: | mfav | | Posted: | Mar 11, 2020 20:52 | | Subject: | StormChaser: the tale of two tails | | Viewed: | 230 times | | Topic: | Catalog | | Status: | Open | |
|
| This is sort of akin to Number Six on your roadmap. I think.
Is there a standardization scheme in the works for items like these shown, and
similar items, where the length exceeds the footprint of the attachment plate?
If you're going by the scheme used for 6239, then 2430 ought to be a 1x5.
If you're going by the scheme used for 2430, then 6239 ought to be a 2x3.
I know this is bound to have implications all over the catalog with many modified
bricks and plates and other things, especially when you get into SNOT pieces,
but there's inconsistency within and across categories now.
One would think the overall x-y-z dimensions of the piece would be considered
every time...
I know this is going to require some quiet contemplation followed by noisy debate,
but some semblance of consistency would be really nice to have.
|
|
|
| Author: | Turez | | Posted: | Mar 10, 2020 13:10 | | Subject: | New minifigure head variant 28621 | | Viewed: | 138 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi everyone,
my set came with a new minifigure head type with two holes and new
number 28621. It is already listed at Brickset:
https://brickset.com/parts/design-28621
Looks like the new mold is only used for transparent heads. All three trans-neon
green heads (1x plain, 2x printed) in my set are the new type while all other
heads are 3626c.
How should the new type (and the printed variants) be added to the catalog?
Regards,
Jonas
|
|
|
| Author: | StormChaser | | Posted: | Mar 9, 2020 18:48 | | Subject: | A Brief Task for A Bored Person | | Viewed: | 222 times | | Topic: | Catalog | | Status: | Open | |
|
| There are problems with these:
[P=41168c01]
[P=41168c02]
[P=41168c03]
[P=41168cx2]
Additionally, there are others not in the catalog. There are various problems
with images, part numbers, colors, inventories, titles, etc., etc.
Bored? Dive in and clean it up! Figure out what needs to be done and start
submitting the necessary requests/additions.
I don't have time + interest at this particular moment, but it needs to be
done.
|
|
| Author: | baylit | | Posted: | Mar 7, 2020 23:30 | | Subject: | LEGOLAND Dollars | | Viewed: | 162 times | | Topic: | Catalog | | Status: | Open | |
|
| I can't find them in the Catalog.
Should I create a new Gear entry?
I have 5 $1s that are from the 1999 series
??
|
|
| Author: | 69transamman | | Posted: | Mar 7, 2020 13:45 | | Subject: | 50899a Showing Only 2 Known Colors | | Viewed: | 100 times | | Topic: | Catalog | | Status: | Open | |
|
| I was trying to identify some Marbled Bionicle Rhotuka Spinner and I noticed
that only 2 colors show up in the known colors list. However, if you click the
link for Color Images it shows actual pictures of 13 identified colors. Why aren't
the other 11 colors shown in the known list? I have the Yellow Marbled and Dark
Red Marbled on hand if additional pictures are needed. The ones I have came from
a bulk lot purchased years ago so, I have no way to identify which set they are
from. My intuition tells me they were from either set #8748-1 or set #6620-1.
While I'm on the topic, does anyone know if the Spinners in set 8749-1 were
all of one color (I am referring only to the 4 Marbled Spinners without code)?
A standard mix of colors? or Completely random assortment of color?
Howard
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
Italy, Toscana
USA, California
Portugal
Belgium, Limburg
)
)
France, Provence-Alpes-Côte d'Azur
United Kingdom, England
Germany, Nordrhein-Westfalen
Denmark
Netherlands, Flevoland
Poland, w. Pomorskie
Lithuania, Panevėžys
)
)
)
Canada, Ontario
Australia, New South Wales
Norway, Hordaland
Spain, Comunidad Valenciana
)
)
)
South Africa, Western Cape
)
)
)
)
)
)
)
Switzerland, Valais
Russia, Moscow City
)
)
)
)
)
)
)
)
)
Singapore
)
)
