Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | Gaston.La.Brick | Posted: | May 16, 2020 10:06 | Subject: | Item 6468: problems? | Viewed: | 62 times | Topic: | Catalog | Status: | Open | |
|
| Hello,
the item 6468 is according to the catalog 1x3x4. This seems correct with the
picture.
However, it is referenced as being used in item 6460. That is not correct with
the dimensions.
I post a picture of the window/door that fits 6460. You can clearly see it fits,
but has other dimensions as item 6468.
|
Author: | Brands_Bricks | Posted: | May 15, 2020 19:10 | Subject: | Lego pin 006 & 005 in different colors | Viewed: | 91 times | Topic: | Catalog | Status: | Open | |
|
| Hello,
It came to my attention that the following parts Pin006 & pin005 are only listed
in the color red. Although there are much more colors: green, blue, white, silver,
yellow and black. I hope these could be added!
Yours sincerely,
Hendrik Brands
|
|
|
Author: | bengreen28 | Posted: | May 15, 2020 16:56 | Subject: | Part marked for deletion | Viewed: | 94 times | Topic: | Catalog | Status: | Open | |
|
| Hi, I have a 1x2 plate that has a sticker on it, I have gone to list it and have
found that it is marked for deletion because the sticker was applied to the wrong
part.
I have got this model at home and also have the instructions for it. the sticker
has been applied to the correct part as it shows it clearly on the instructions.
Who do we contact in order to get the deletion cancelled?
Part number is 3023pb01, you can see clearly in the picture that the sticker
is applied to the 1x2 plate and not the mudguard.
|
|
|
Author: | Yo_Yo_Flamingo | Posted: | May 15, 2020 10:39 | Subject: | Can I see Imperial units for Catalog entries? | Viewed: | 74 times | Topic: | Catalog | Status: | Open | |
|
| Is there any way for me to view the weight/dimensions of a set from its catalog
entry in Imperial units (pounds/inches- ghastly, I know, but I live in America)?
I commonly use this when quoting shipping for a buyer so I don't have to
dig out a set every time someone asks, but it is always a little bit of hassle
to convert grams to pounds and cm to inches.
|
|
Author: | Soviet | Posted: | May 15, 2020 09:26 | Subject: | White sheep problem | Viewed: | 111 times | Topic: | Catalog | Status: | Open | |
|
| Hey, I'm trying to help with the 21159 set, but it would be my first inventory
job, so I'm hitting a block early on.
It looks like the set has one of those:
but in white. Meanwhile, the name "Minecraft Sheep, White - Brick Built" is already
taken by:
which has a different build (plates instead of brick). What to do, I wonder?
|
|
Author: | enig | Posted: | May 13, 2020 16:26 | Subject: | 2555 - even more variants | Viewed: | 122 times | Topic: | Catalog | Status: | Open | |
|
| Happy day The time that is spent differentiating between mold variants is
certainly not worth it money-wise, but worth it in other ways.
A customer purchased some classic 2555's. Apparently we still sent two different
variants to him. Sure, most of the older parts have various mini-differences,
just never thought anyone would actually care about getting a specific variant.
Either way, I was not aware of this particular difference.
Our customer described it as 'The wider ones and the narrower ones' and
sent us a picture, circling the different variants. A bit hard to see, I am attaching
one more.
The difference itself is in the sharpness of the outside/inside edges - the very
tops the clips. Principally kind of similar to the difference between classic
and modern 2555, except much more subtle. Difficult to judge if looking at the
edge itself, but becomes easy when comparing from the top view. At least when
you have two pieces to compare
The left one has, call it, completely sharp edge. The right one has a slight
roundness to it. That rounding comes at a cost of reducing the top surface area
of the clip.
Complete list of the differences between the two:
The 'flat top' type:
* Sharper edge / bigger top surface area of the clip
* mold pip on a side
* now looking from yet another side, the sidewall of the clip is completely straight
in all dimensions - does not get narrower towards the top and forms a straight
rectangle (the last picture)
The 'slightly slightly rounded top'
* Slightly rounded top edge of the clip, reduced flat surface area of the top
* mold pip at the bottom
* sidewall is of slightly concave shape - forms a trapezoid
Some more differences, but only concerns the construction of the mold and the
ejection pins placement.
Question(s).
1 - How many of you have/have not noticed this particular difference before?
Curious.
2 - any other different classic 2555s than these two?
|
|
|
Author: | Zab3uk75 | Posted: | May 10, 2020 11:22 | Subject: | Minifig torsos no clutch | Viewed: | 86 times | Topic: | Catalog | Status: | Open | |
|
| Hi
Just wondering whether this is a different catalog number for torsos with no
clutch or would I need to mention this in my listing?
Thanks
Stay safe everyone
June
|
Author: | biomajor09 | Posted: | May 9, 2020 12:39 | Subject: | Pieces and technique used | Viewed: | 59 times | Topic: | Catalog | Status: | Open | |
|
| Hi!
I am just starting to get into MOCs. Can anyone tell me what pieces they use
to hold up the flags?
Thanks so much!
|
|
|
|
Author: | hpoort | Posted: | May 3, 2020 10:06 | Subject: | Ants | Viewed: | 219 times | Topic: | Catalog | Status: | Open | |
|
| Except for the coloring, is there any difference between [p=62575cx1] and ?
Also, how do we go about numbering in such a case in general? 62575 is the LEGO
design number for the marbled version, 23714 for the plain version. Is the former
really seen as an assembly (cx1)?
I would suggest 62575cx1 renumbered to 23714pb01 and 62575 listed as an alternative
number. Before making such a request, I'd like to be sure about any differences
and guide lines.
And yes, Robert, I know the catalog team has different priorities right now,
but this one just came up and I wonder.
|
|
Author: | BRCook | Posted: | May 1, 2020 17:44 | Subject: | Dimensions for instant checkout | Viewed: | 45 times | Topic: | Catalog | Status: | Open | |
|
| I have had some issues with items not having size dimensions (particularly for
newer items - come up as 0x0x0 or ?x?x?).
This has caused me problems with instant checkout because even though there are
no dimensions it is not forcing a quote request (which is what I thought should
happen).
Anyone have any similar experiences or suggestions for a fix (Admins?)
Thanks in advance
Brendan
|
Author: | skikyssing | Posted: | May 1, 2020 04:50 | Subject: | search | Viewed: | 43 times | Topic: | Catalog | Status: | Open | |
|
| I'm not getting the suggestions in the drop down box when typing in searches
anymore...
It seems that this is for everyone.
Why do you have to change something that works perfectly?
|
Author: | BrickPhaisan | Posted: | Apr 30, 2020 08:03 | Subject: | Help with this color | Viewed: | 61 times | Topic: | Catalog | Status: | Open | |
|
| Hello, I am new here and I have a problem with part 3002, since I have two parts
of this color that I do not know very well how to classify. Let's see if
someone knows how to tell me what color it is? to me it looks blue-purple.
Thanks in advance
|
|
Author: | normann1974 | Posted: | Apr 30, 2020 07:06 | Subject: | Set 1775 alternative stickers | Viewed: | 60 times | Topic: | Catalog | Status: | Open | |
|
| I've just added [P=4867pb24] in hope that it will be accepted. Here's
a photo of the set. It's not mine, so I can't prove anything about it.
The building instructions are generic.
/Jan
|
|
Author: | POPS_BLOCK_SHOP | Posted: | Apr 29, 2020 15:59 | Subject: | 75149 need sticker counter parts added | Viewed: | 47 times | Topic: | Catalog | Status: | Open | |
|
| Looked up set 75149 Star Wars and there are no counter parts for the stickers.
How can these be added? I have all of them.
|
Author: | yorbrick | Posted: | Apr 29, 2020 09:00 | Subject: | 3626cpb2463 Fright knight head | Viewed: | 57 times | Topic: | Catalog | Status: | Open | |
|
|
* | | 3626cpb2463 Minifigure, Head Alien Female Bright Light Blue Long Eyelashes and Cheek Lines, White Eyes, Blue Open Mouth Smile with Teeth Parted and Fangs Pattern - Hollow Stud Parts: Minifigure, Head |
I notice the head of the Fright Knight from CMF S19 is listed as female. Has
LEGO ever confirmed that this character is meant to be female? I couldn't
find the online bios like they used to do.
|
|
Author: | StormChaser | Posted: | Apr 28, 2020 13:02 | Subject: | City Beautification Project | Viewed: | 132 times | Topic: | Catalog | Status: | Open | |
|
| Thanks to new functionality from BrickLink we've added hundreds of large,
high-quality additional images for City sets during the past three weeks. These
images are now available for most City sets from 2010-2020.
The actual set images weren't updated, unfortunately, but the additional
images are amazing. I've included representative samples from each year
below. The additional images can be viewed by clicking on any set image, but
the set entry must be visited to zoom in and appreciate the true image quality.
Enjoy!
|
|
Author: | BricksThatStick | Posted: | Apr 27, 2020 18:59 | Subject: | Assistance Needed with 9V Battery Box Images | Viewed: | 74 times | Topic: | Catalog | Status: | Open | |
|
| If anyone out there can help with some images for the catalog it would be greatly
appreciated:
Randy and SezaR are in the process of simplifying the 9V battery box inventories.
https://www.bricklink.com/message.asp?ID=1189975
The box part without the bottom cover for some of these have kindly been submitted
by SezaR here:
https://www.bricklink.com/v2/catalog/catalogImagePendingApproval.page?uID=552064&catID=411&catType=P
Thats the top part of these 3 complete boxes:
But now we need a favor from the community...
If any of you has any of these below and can submit an image of them without
the bottom battery cover then we can add a complete set of these at once and
its all nice and neat
If you can please maintain the orientation of the box with the existing images
and have it against a white background if possible:
The top box of this one:
Will be this entry:
The top box of this one:
Will be this entry:
The top box of this one:
Will be this entry:
The top box of this one:
Will be this entry:
The top box of this one:
Will be this entry:
The top box of this one:
Will be this entry:
Many thanks in advance
|
|
Author: | Rus_Numis | Posted: | Apr 25, 2020 18:30 | Subject: | Pending items in catalog | Viewed: | 70 times | Topic: | Catalog | Status: | Open | |
|
| How long does it usually take for item to be finally added to Catalog when it
is in "Pending" status? I tried to add a few items released in 2020 in my store
but I didn't find them in Catalog. When I tried to add an item I got notified
that this item is already in Catalog but pending approval. It's been a week
now since my attempt and items still not there.
|
|
Author: | StormChaser | Posted: | Apr 24, 2020 10:35 | Subject: | Item Type Discussion | Viewed: | 307 times | Topic: | Catalog | Status: | Open | |
|
| We're considering the possibility of updating the page defining item types
on June 1st when we add the new category definitions.
Please take a look at the difference between the existing page:
https://www.bricklink.com/help.asp?helpID=170
and the proposed update:
https://www.bricklink.com/help.asp?helpID=2487
Are there any items in the catalog that still aren't addressed by the new
page? Put differently, what can you find in the catalog for which classification
by item type is still unclear when going by the definitions on the new page?
On the definition for figures: yes, I know that is very vague and could need
work.
Thanks in advance for any feedback.
|
|
Author: | tonnic | Posted: | Apr 23, 2020 11:23 | Subject: | What does undetermined means in this case. | Viewed: | 113 times | Topic: | Catalog | Status: | Open | |
|
| If I have this part in hands, plate modified 1x2 with 1 stud jumper undetermined
bottom type.
https://www.bricklink.com/v2/catalog/catalogitem.page?P=3794#T=C
What does this means when selling this piece? Is it the lazy way of selling this
piece, or the way to sell it if you do not know the differences?
Is it the sort of term I can use when I do not know if it has a groove or not,
does or does not have a bottom stud holder?
In fact, if I sell a part like this, does it means I sell it in the way: I don’t
know, buy it an expect 1 of the 3 different types that are mentioned as related
items?
If not the above mentioned, what does this type of modifies plate looks like?
What can a buyer expect when they buy it?
|
|
Author: | starbeanie | Posted: | Apr 23, 2020 10:05 | Subject: | Instructions | Viewed: | 135 times | Topic: | Catalog | Status: | Open | |
|
| Why aren't there separate catalog entries for the US vs. Foreign instructions
on set entries? They have different id codes printed on them. Lego differentiates
between them if you are reprinting them.
Print Versions
Building instructions labeled "NA" or "V39" may be printed on US standard letter
size paper
Building instructions labeled "IN" or "V29" may be printed on EU standard A4
paper
|
Author: | bje | Posted: | Apr 23, 2020 08:41 | Subject: | Images/Renders Part 4447 | Viewed: | 73 times | Topic: | Catalog | Status: | Open | |
|
|
I have one of these from but mine have all 4 studs as solid studs
and no hollow studs. Are the renders for this part correct or is mine an undocumented
variant?
|
|
Author: | BricksThatStick | Posted: | Apr 21, 2020 18:41 | Subject: | Torso and Leg Assemblies Categories Split | Viewed: | 90 times | Topic: | Catalog | Status: | Open | |
|
| Project number 8 from the Catalog Roadmap: Torso and Leg Assemblies Categories
Split
This has now been completed
The legs categories have just been done so although they show up in the main
list of categories they will not show as a separate category in storefronts until
the daily maintenance later.
https://www.bricklink.com/catalogTree.asp?itemType=P
The torsos were completed a few days ago so are already showing up correctly
in stores.
Hopefully that will make it easier for yoy when browsing the categories or looking
for non decorated parts when searching or listing parts for sale.
Paul.
(still remains project number 8 - I'll edit the page shortly)
|
|
Author: | StormChaser | Posted: | Apr 21, 2020 03:57 | Subject: | Brick Built | Viewed: | 111 times | Topic: | Catalog | Status: | Open | |
|
| I hear that it's now possible to locate brick-built creatures in the catalog
simply by searching for "brick built." I don't know how helpful that will
be, but I thought it was worth mentioning.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|