Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | Adjour  | | Posted: | May 15, 2020 12:00 | | Subject: | Re: Can I see Imperial units for Catalog entries? | | Viewed: | 30 times | | Topic: | Catalog | |
|
| In Catalog, paulvdb writes:
| | In Catalog, Yo_Yo_Flamingo writes:
| | Is there any way for me to view the weight/dimensions of a set from its catalog
entry in Imperial units (pounds/inches- ghastly, I know, but I live in America)?
I commonly use this when quoting shipping for a buyer so I don't have to
dig out a set every time someone asks, but it is always a little bit of hassle
to convert grams to pounds and cm to inches.
|
https://www.bricklink.com/catalogOptions.asp?viewFrom=P
|
Omg thank you.
|
 |
| Author: | popsicle | | Posted: | May 15, 2020 10:57 | | Subject: | Re: Can I see Imperial units for Catalog entries? | | Viewed: | 48 times | | Topic: | Catalog | |
|
| In Catalog, paulvdb writes:
| | In Catalog, Yo_Yo_Flamingo writes:
| | Is there any way for me to view the weight/dimensions of a set from its catalog
entry in Imperial units (pounds/inches- ghastly, I know, but I live in America)?
I commonly use this when quoting shipping for a buyer so I don't have to
dig out a set every time someone asks, but it is always a little bit of hassle
to convert grams to pounds and cm to inches.
|
https://www.bricklink.com/catalogOptions.asp?viewFrom=P
|
I'm a little surprised that TLG has keep that in place, as global-minded
as they are. Not complaining, I also appreciate the ability to use the system
that's more intuitive for me.
|
|
| Author: | Yo_Yo_Flamingo | | Posted: | May 15, 2020 10:48 | | Subject: | Re: Can I see Imperial units for Catalog entries? | | Viewed: | 21 times | | Topic: | Catalog | |
|
| In Catalog, paulvdb writes:
| | In Catalog, Yo_Yo_Flamingo writes:
| | Is there any way for me to view the weight/dimensions of a set from its catalog
entry in Imperial units (pounds/inches- ghastly, I know, but I live in America)?
I commonly use this when quoting shipping for a buyer so I don't have to
dig out a set every time someone asks, but it is always a little bit of hassle
to convert grams to pounds and cm to inches.
|
https://www.bricklink.com/catalogOptions.asp?viewFrom=P
|
You're amazing, Mate! Thanks 3000!
|
|
| Author: | paulvdb | | Posted: | May 15, 2020 10:47 | | Subject: | Re: Can I see Imperial units for Catalog entries? | | Viewed: | 36 times | | Topic: | Catalog | |
|
| In Catalog, Yo_Yo_Flamingo writes:
| | Is there any way for me to view the weight/dimensions of a set from its catalog
entry in Imperial units (pounds/inches- ghastly, I know, but I live in America)?
I commonly use this when quoting shipping for a buyer so I don't have to
dig out a set every time someone asks, but it is always a little bit of hassle
to convert grams to pounds and cm to inches.
|
https://www.bricklink.com/catalogOptions.asp?viewFrom=P
|
|
| Author: | Yo_Yo_Flamingo | | Posted: | May 15, 2020 10:39 | | Subject: | Can I see Imperial units for Catalog entries? | | Viewed: | 74 times | | Topic: | Catalog | | Status: | Open | |
|
| Is there any way for me to view the weight/dimensions of a set from its catalog
entry in Imperial units (pounds/inches- ghastly, I know, but I live in America)?
I commonly use this when quoting shipping for a buyer so I don't have to
dig out a set every time someone asks, but it is always a little bit of hassle
to convert grams to pounds and cm to inches.
|
| Author: | StormChaser | | Posted: | May 15, 2020 10:21 | | Subject: | Re: White sheep problem | | Viewed: | 37 times | | Topic: | Catalog | |
|
| In Catalog, Soviet writes:
Send in the new sheep and we'll figure out a title for it.
|
| Author: | Soviet | | Posted: | May 15, 2020 09:26 | | Subject: | White sheep problem | | Viewed: | 111 times | | Topic: | Catalog | | Status: | Open | |
|
| Hey, I'm trying to help with the 21159 set, but it would be my first inventory
job, so I'm hitting a block early on.
It looks like the set has one of those:
but in white. Meanwhile, the name "Minecraft Sheep, White - Brick Built" is already
taken by:
which has a different build (plates instead of brick). What to do, I wonder?
|
|
| Author: | enig | | Posted: | May 13, 2020 17:22 | | Subject: | Re: 2555 - even more variants | | Viewed: | 50 times | | Topic: | Catalog | |
|
| In Catalog, edeevo writes:
| | In Catalog, enig writes:
| | Happy day  The time that is spent differentiating between mold variants is
certainly not worth it money-wise, but worth it in other ways.
A customer purchased some classic 2555's. Apparently we still sent two different
variants to him. Sure, most of the older parts have various mini-differences,
just never thought anyone would actually care about getting a specific variant.
Either way, I was not aware of this particular difference.
Our customer described it as 'The wider ones and the narrower ones' and
sent us a picture, circling the different variants. A bit hard to see, I am attaching
one more.
The difference itself is in the sharpness of the outside/inside edges - the very
tops the clips. Principally kind of similar to the difference between classic
and modern 2555, except much more subtle. Difficult to judge if looking at the
edge itself, but becomes easy when comparing from the top view. At least when
you have two pieces to compare
The left one has, call it, completely sharp edge. The right one has a slight
roundness to it. That rounding comes at a cost of reducing the top surface area
of the clip.
Complete list of the differences between the two:
The 'flat top' type:
* Sharper edge / bigger top surface area of the clip
* mold pip on a side
* now looking from yet another side, the sidewall of the clip is completely straight
in all dimensions - does not get narrower towards the top and forms a straight
rectangle (the last picture)
The 'slightly slightly rounded top'
* Slightly rounded top edge of the clip, reduced flat surface area of the top
* mold pip at the bottom
* sidewall is of slightly concave shape - forms a trapezoid
Some more differences, but only concerns the construction of the mold and the
ejection pins placement.
Question(s).
1 - How many of you have/have not noticed this particular difference before?
Curious.
2 - any other different classic 2555s than these two?
|
I'd say it's pretty commonly known; the squared-top kind are the older
type, whereas the rounded-top kind are newer (the catalog entry has a note indicating
the difference)...
I actually keep the two types separated in my inventory in anticipation of a
new entry for each--which will likely never happen--but having each type
together really helps me to give a Buyer the same type whenever they buy any.
Life is Good.
~Ed.
|
Yeah that's how my employee was looking at this too. We nearly got into an
actual argument over this haha.
It's not the BL described difference that I am talking about. The key part
addressing this in the OP is:
The difference itself is in the sharpness of the outside/inside edges - the
very tops the clips. Principally kind of similar to the difference between classic
and modern 2555, except much more subtle.
Will get back to this tomorrow I guess, with more pictures comparing these to
the newer 2555s.
|
|
| Author: | edeevo | | Posted: | May 13, 2020 17:05 | | Subject: | Re: 2555 - even more variants | | Viewed: | 49 times | | Topic: | Catalog | |
|
| In Catalog, enig writes:
| | Happy day The time that is spent differentiating between mold variants is
certainly not worth it money-wise, but worth it in other ways.
A customer purchased some classic 2555's. Apparently we still sent two different
variants to him. Sure, most of the older parts have various mini-differences,
just never thought anyone would actually care about getting a specific variant.
Either way, I was not aware of this particular difference.
Our customer described it as 'The wider ones and the narrower ones' and
sent us a picture, circling the different variants. A bit hard to see, I am attaching
one more.
The difference itself is in the sharpness of the outside/inside edges - the very
tops the clips. Principally kind of similar to the difference between classic
and modern 2555, except much more subtle. Difficult to judge if looking at the
edge itself, but becomes easy when comparing from the top view. At least when
you have two pieces to compare
The left one has, call it, completely sharp edge. The right one has a slight
roundness to it. That rounding comes at a cost of reducing the top surface area
of the clip.
Complete list of the differences between the two:
The 'flat top' type:
* Sharper edge / bigger top surface area of the clip
* mold pip on a side
* now looking from yet another side, the sidewall of the clip is completely straight
in all dimensions - does not get narrower towards the top and forms a straight
rectangle (the last picture)
The 'slightly slightly rounded top'
* Slightly rounded top edge of the clip, reduced flat surface area of the top
* mold pip at the bottom
* sidewall is of slightly concave shape - forms a trapezoid
Some more differences, but only concerns the construction of the mold and the
ejection pins placement.
Question(s).
1 - How many of you have/have not noticed this particular difference before?
Curious.
2 - any other different classic 2555s than these two?
|
I'd say it's pretty commonly known; the squared-top kind are the older
type, whereas the rounded-top kind are newer (the catalog entry has a note indicating
the difference)...
I actually keep the two types separated in my inventory in anticipation of a
new entry for each--which will likely never happen--but having each type
together really helps me to give a Buyer the same type whenever they buy any.
Life is Good.
~Ed.
|
|
|
| Author: | James2506 | | Posted: | May 13, 2020 16:47 | | Subject: | Re: Why oh why Batman Sh016b | | Viewed: | 49 times | | Topic: | Catalog | |
|
| Thanks!
I built myself an Sh016b today using spare parts from my other figures so your
method has its benefits - i dont have to keep buying new sets - although i do
own the SDCC Gotham Skyline set - just refuse to open it.
James
In Catalog, Hygrotus writes:
| | In Catalog, James2506 writes:
| | So in the coming summer sets for DC Batman we are getting another black Sh016
batman but a new cape (very cool looking glide cape) - so we should expect Sh016c
in the Penguin Boat Chase.
|
In set 75168 will be new number for Batman as cape has totally different shape
so this will be Batman assembly with new part not being varian of previous capes
This cape isn't a varian to capes
and
[p=56630b,11]
and
New part in assembly not part variant so new number not a, b or c
| | We are also getting another dark grey batman with
gold outline belt with the same new cape so he should get Sh589a in the Mobile
Bat Base and Joker Trike Chase. Interestingly they are releasing these with
3 capes in each set so are we going to get 3 variants in a single set!!!! Oh
my head hurts.
|
For other two Batman sets policy is clear only one minfig can be accepted in
assembly as showed firstly in building instruction. So when minfig has in alternates
for it assembly only fisrt showed version in instruction is approved.
For example
in set
can be with hair or helmet.
but in instruction
https://www.lego.com/biassets/bi/6310759.pdf
it is firstly showed assembled with hair then with helmet
so only with hair is being accepted for this set, we don't crate second entry
with helmet.
|
|
|
| Author: | enig | | Posted: | May 13, 2020 16:26 | | Subject: | 2555 - even more variants | | Viewed: | 122 times | | Topic: | Catalog | | Status: | Open | |
|
| Happy day The time that is spent differentiating between mold variants is
certainly not worth it money-wise, but worth it in other ways.
A customer purchased some classic 2555's. Apparently we still sent two different
variants to him. Sure, most of the older parts have various mini-differences,
just never thought anyone would actually care about getting a specific variant.
Either way, I was not aware of this particular difference.
Our customer described it as 'The wider ones and the narrower ones' and
sent us a picture, circling the different variants. A bit hard to see, I am attaching
one more.
The difference itself is in the sharpness of the outside/inside edges - the very
tops the clips. Principally kind of similar to the difference between classic
and modern 2555, except much more subtle. Difficult to judge if looking at the
edge itself, but becomes easy when comparing from the top view. At least when
you have two pieces to compare
The left one has, call it, completely sharp edge. The right one has a slight
roundness to it. That rounding comes at a cost of reducing the top surface area
of the clip.
Complete list of the differences between the two:
The 'flat top' type:
* Sharper edge / bigger top surface area of the clip
* mold pip on a side
* now looking from yet another side, the sidewall of the clip is completely straight
in all dimensions - does not get narrower towards the top and forms a straight
rectangle (the last picture)
The 'slightly slightly rounded top'
* Slightly rounded top edge of the clip, reduced flat surface area of the top
* mold pip at the bottom
* sidewall is of slightly concave shape - forms a trapezoid
Some more differences, but only concerns the construction of the mold and the
ejection pins placement.
Question(s).
1 - How many of you have/have not noticed this particular difference before?
Curious.
2 - any other different classic 2555s than these two?
|
|
|
| Author: | yorbrick | | Posted: | May 13, 2020 16:19 | | Subject: | Re: Category Definitions Discussion - Parts P - R | | Viewed: | 28 times | | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| | In Catalog, yorbrick writes:
| | I don't think the definitions should be so focussed.
|
I've modified the Propeller definition to this:
For items with circularly-spinning blades, including accessories and component
parts.
|
|
|
| Author: | bje | | Posted: | May 13, 2020 15:06 | | Subject: | Re: Category Definitions Discussion - Parts V- | | Viewed: | 33 times | | Topic: | Catalog | |
|
| In Catalog, SylvainLS writes:
| | In Catalog, bje writes:
| | […]
Wheel - For items that is a solid disk or a rigid circular ring connected
by spokes to a hub, designed to turn, which may or may not fit tire and tread.
|
Hmm, those are wheels:
and fit your description but I’m not sure we’d want them in the Wheel category
|
Me neither, Let me sleep on it though
snip
| |
Dang. No one ever agree with anyone, not even lexicologists.
(French “véhicule” (the etymon) admits the “extended” usages.)
|
And in Afrikaans (voertuig) any mobile machine used for transport.... which can
makes things easier or more difficult
|
|
| Author: | SylvainLS | | Posted: | May 13, 2020 14:28 | | Subject: | Re: Category Definitions Discussion - Parts V- | | Viewed: | 27 times | | Topic: | Catalog | |
|
| In Catalog, SylvainLS writes:
not 30633
|
|
| Author: | SylvainLS | | Posted: | May 13, 2020 14:26 | | Subject: | Re: Category Definitions Discussion - Parts V- | | Viewed: | 33 times | | Topic: | Catalog | |
|
| In Catalog, bje writes:
| | […]
Wheel - For items that is a solid disk or a rigid circular ring connected
by spokes to a hub, designed to turn, which may or may not fit tire and tread.
|
Hmm, those are wheels:
and fit your description but I’m not sure we’d want them in the Wheel category
| | | | | | […]
2. A vehicle is by definition only something with wheels for land transport.
Consider rather moving the aircraft section out.
|
 By which definition?
A vehicle is a means of transporting, carrying, something or someone. I don’t
see anything preventing vehicle to be used for aircrafts or boats.
Indeed, this is from WP ( https://en.wikipedia.org/wiki/Vehicle ):
“A vehicle (from Latin: vehiculum[1]) is a machine that transports people or
cargo. Vehicles include wagons, bicycles, motor vehicles (motorcycles, cars,
trucks, buses), railed vehicles (trains, trams), watercraft (ships, boats), amphibious
vehicles (screw-propelled vehicle, hovercraft), aircraft (airplanes, helicopters)
and spacecraft.[2]”
The references are [1] OED and [2] MacMillan Contemporary Dictionary.
|
Vehicle noun (MACHINE)
B1 [ C ] formal
a machine, usually with wheels and an engine, used for transporting people or
goods on land, especially on roads
Cambridge English Dictionary set to US English specifically
|
Dang. No one ever agree with anyone, not even lexicologists.
(French “véhicule” (the etymon) admits the “extended” usages.)
| | Also, we have aircraft and boat sections, which presumably should exclude those
from being in another section.
|
Okay.
|
|
| Author: | StormChaser | | Posted: | May 13, 2020 14:07 | | Subject: | Re: Category Definitions Discussion - Parts P - R | | Viewed: | 31 times | | Topic: | Catalog | |
|
| In Catalog, yorbrick writes:
| | I don't think the definitions should be so focussed.
|
I've modified the Propeller definition to this:
For items with circularly-spinning blades, including accessories and component
parts.
|
|
| Author: | StormChaser | | Posted: | May 13, 2020 14:06 | | Subject: | Re: Category Definitions Discussion - Plate | | Viewed: | 32 times | | Topic: | Catalog | |
|
| In Catalog, bje writes:
| | Plate - For items nearly identical in use to building bricks that are one
third as tall, have one or more studs, and for which all corners are square.
|
Thank you for pointing out the problem with the current definition. We'll
keep hammering away at these until we get them right.
I have modified it to this:
For items similar to building bricks that are one third as tall, have top surfaces
evenly covered in studs, and for which all corners are square.
Will this better define what should be a plate?
|
|
| Author: | bje | | Posted: | May 13, 2020 13:57 | | Subject: | Re: Category Definitions Discussion - Parts V- | | Viewed: | 31 times | | Topic: | Catalog | |
|
| In Catalog, SylvainLS writes:
| | In Catalog, bje writes:
| | […]
Wheel - For items that is a solid disk or a rigid circular ring connected
by spokes to a hub, designed to turn around an axle passed through the centre,
which may or may not fit tire and tread. Note 6
|
Potential problem with “axle”: it could be understood as “Technic axle.”
Maybe it should be amended with examples, like “(Technic axle, Technic pin, or
wheel pin).”
|
Hmm, you are right, I was trying to move away from the hub idea. Maybe leave
off the axle part altogether then:
Wheel - For items that is a solid disk or a rigid circular ring connected
| | | | by spokes to a hub, designed to turn, which may or may not fit tire and tread.
|
|
| |
| | […]
2. A vehicle is by definition only something with wheels for land transport.
Consider rather moving the aircraft section out.
|
By which definition?
A vehicle is a means of transporting, carrying, something or someone. I don’t
see anything preventing vehicle to be used for aircrafts or boats.
Indeed, this is from WP ( https://en.wikipedia.org/wiki/Vehicle ):
“A vehicle (from Latin: vehiculum[1]) is a machine that transports people or
cargo. Vehicles include wagons, bicycles, motor vehicles (motorcycles, cars,
trucks, buses), railed vehicles (trains, trams), watercraft (ships, boats), amphibious
vehicles (screw-propelled vehicle, hovercraft), aircraft (airplanes, helicopters)
and spacecraft.[2]”
The references are [1] OED and [2] MacMillan Contemporary Dictionary.
|
Vehicle noun (MACHINE)
B1 [ C ] formal
a machine, usually with wheels and an engine, used for transporting people or
goods on land, especially on roads
Cambridge English Dictionary set to US English specifically
Also, we have aircraft and boat sections, which presumably should exclude those
from being in another section.
|
|
| Author: | Hygrotus | | Posted: | May 13, 2020 13:49 | | Subject: | Re: Why oh why Batman Sh016b | | Viewed: | 56 times | | Topic: | Catalog | |
|
| In Catalog, James2506 writes:
| | So in the coming summer sets for DC Batman we are getting another black Sh016
batman but a new cape (very cool looking glide cape) - so we should expect Sh016c
in the Penguin Boat Chase.
|
In set 75168 will be new number for Batman as cape has totally different shape
so this will be Batman assembly with new part not being varian of previous capes
This cape isn't a varian to capes
and
[p=56630b,11]
and
New part in assembly not part variant so new number not a, b or c
| | We are also getting another dark grey batman with
gold outline belt with the same new cape so he should get Sh589a in the Mobile
Bat Base and Joker Trike Chase. Interestingly they are releasing these with
3 capes in each set so are we going to get 3 variants in a single set!!!! Oh
my head hurts.
|
For other two Batman sets policy is clear only one minfig can be accepted in
assembly as showed firstly in building instruction. So when minfig has in alternates
for it assembly only fisrt showed version in instruction is approved.
For example
in set
can be with hair or helmet.
but in instruction
https://www.lego.com/biassets/bi/6310759.pdf
it is firstly showed assembled with hair then with helmet
so only with hair is being accepted for this set, we don't crate second entry
with helmet.
|
|
| Author: | SylvainLS | | Posted: | May 13, 2020 13:44 | | Subject: | Re: Category Definitions Discussion - Parts V- | | Viewed: | 28 times | | Topic: | Catalog | |
|
| In Catalog, bje writes:
| | […]
Wheel - For items that is a solid disk or a rigid circular ring connected
by spokes to a hub, designed to turn around an axle passed through the centre,
which may or may not fit tire and tread. Note 6
|
Potential problem with “axle”: it could be understood as “Technic axle.”
Maybe it should be amended with examples, like “(Technic axle, Technic pin, or
wheel pin).”
| | […]
2. A vehicle is by definition only something with wheels for land transport.
Consider rather moving the aircraft section out.
|
By which definition?
A vehicle is a means of transporting, carrying, something or someone. I don’t
see anything preventing vehicle to be used for aircrafts or boats.
Indeed, this is from WP ( https://en.wikipedia.org/wiki/Vehicle ):
“A vehicle (from Latin: vehiculum[1]) is a machine that transports people or
cargo. Vehicles include wagons, bicycles, motor vehicles (motorcycles, cars,
trucks, buses), railed vehicles (trains, trams), watercraft (ships, boats), amphibious
vehicles (screw-propelled vehicle, hovercraft), aircraft (airplanes, helicopters)
and spacecraft.[2]”
The references are [1] OED and [2] MacMillan Contemporary Dictionary.
|
|
| Author: | James2506 | | Posted: | May 13, 2020 13:16 | | Subject: | Re: Why oh why Batman Sh016b | | Viewed: | 46 times | | Topic: | Catalog | |
|
| So in the coming summer sets for DC Batman we are getting another black Sh016
batman but a new cape (very cool looking glide cape) - so we should expect Sh016c
in the Penguin Boat Chase. We are also getting another dark grey batman with
gold outline belt with the same new cape so he should get Sh589a in the Mobile
Bat Base and Joker Trike Chase. Interestingly they are releasing these with
3 capes in each set so are we going to get 3 variants in a single set!!!! Oh
my head hurts.
Thanks
In Catalog, Hygrotus writes:
| | In Catalog, axaday writes:
| | In Catalog, James2506 writes:
| | I think each variant should get a fresh number. Certainly the faces do even
though the rest of the fig remains the same. It just happened with Mr Freeze
too - the dark Peary grey now has two unique numbers when all that changed was
the neck bracket and weapon.
How do we ask Admins to consider changing the naming first given?
|
I am sure an admin will see this thread.
It's not a for sure thing. They also have to weigh in how it will affect
stores to have the name change. They may have labelled things. Just adding
a or b on the end is much gentler for that.
|
When minfigs assembly is exactly the same but there is just one minior change
in part variant minfigs is classified as variant minfig and gets a or b or c
if there are more variants.
In Batman case all three are the same just one part is in differnt part variant
in sh016 and sh016a and now sh016b is the same assembly as sh016a just cape is
in diffrent part variant. It is a quite common practice (not always consistent,
but I try to keep it consistent)
Minfigs gest new number when assembly is diffrent for example wjhen for this
Batmon would be added totally differnt part
Example with Mr Freeze is good it got nee number as assembly is different, this
minfig has additiona parts so it makes an assembly different.
so few example
assembly the same just the head has different color
assembly the same just cape variant changed
but
new numbers as totally different heads are in there
but when print on the head si only small variation minfig is consider also variant
and gets an a
* | | trn227 (Inv) Overalls with Tools in Pocket, Blue Legs, Red Short Bill Cap, Glasses with Brown Thin Eyebrows
Minifigures: Train |
brown eybrows vs red eyebrows, very minor difference beside that minfigs are
identical
recently added
these have different numbers as they are different assemblies, every one have
additional parts there, but for example if suddenly LEGO would start produce
cupcae in different mold variant and it would be discovered then one with mold
variant of such part would get variant with the same number and added a
when you look through catalog teher really a lot of "a" and "b" variants of minifigs
in very different themes
So important is how significant if change of similar character or minfigs. Slight
change, only different part variant but whole assembly the same. This is minfig
variant with the same number but with a added. Only slight change in prinbt also
only a variant. Significant print change or aditional parts added which makes
it different assembty, new number.
some more examples
only chane of color of the photoreceptor
but here more significant print change
ok there are meny meny more examples
so numeration of those batmans stays as they are as those minfigs hase the same
assemblies only parts are in different mold variants
normal cape vs spongy cape
type of mask also mold variant
the same here only mask mold change
but here different heads, so different assemblies and new numbers
(btw name should be change here to get rid of type 1, 2 and 3, describtion of
faces exspressions should be here as all heads have different prints like here
for example https://www.bricklink.com/catalogListOld.asp?pg=1&catString=971&catType=M&v=1)
Hope this is more clear now why ve have minfigs variants marked as a nad b
|
|
|
| Author: | bje | | Posted: | May 13, 2020 13:12 | | Subject: | Re: Category Definitions Discussion - Plate | | Viewed: | 29 times | | Topic: | Catalog | |
|
| In Catalog, bje writes:
which will be a round plate
|
|
| Author: | bje | | Posted: | May 13, 2020 13:10 | | Subject: | Re: Category Definitions Discussion - Plate | | Viewed: | 35 times | | Topic: | Catalog | |
|
| In Catalog, bje writes:
New definition:
Plate - For items nearly identical in use to building bricks that are one
third as tall, have one or more studs, and for which all corners are square.
Sorry, but is it the intention that these parts and a few other similar ones
are to be moved to category plates as they all satisfy that definition?
The concern I have is that we are moving away from the plate being a representation
of a brick in 1/3 height as TLG defines it as well. There are at present no bricks
with missing studs along the top, so should plates not be the same? IOW if there
are studs missing, we class that as normal for a plate and not a modification.
Or am I just reading the definition wrong (in which case it is probably not meeting
expectations )
This does impact on what tiles are as well (plates with no studs essentially),
so best to get it out of the way.
|
|
| Author: | bje | | Posted: | May 13, 2020 12:43 | | Subject: | Re: Category Definitions Discussion - Parts V- | | Viewed: | 34 times | | Topic: | Catalog | |
|
| I'll hopefully have the final T-section ready by tomorrow
Definitions – Section V Parts
Vehicle - For a sub-theme of Legoland sets that featured vehicles released
from the early 1960s to the late 1970s. Note1
Vehicle, Base - For items that function as a platform on which to construct
vehicles and their accessories. Note 2
Vehicle, Mudguard - For items that combined make up the wheel well, fender
and fender flares on vehicles and the mudguards on riding cycles. Note 3
Definitions – Section W Parts
Wedge - For items other than plates that have a narrow edge at one end
and a wider edge at the other end. Note 4
Wedge, Plate - For plates that have a narrow edge at one end and a wider
edge at the other end. Note 5
Wheel - For items that is a solid disk or a rigid circular ring connected
by spokes to a hub, designed to turn around an axle passed through the centre,
which may or may not fit tire and tread. Note 6
Wheel & Tire Assembly - For items that are a combination of a wheel and
a tire.
Wheel, Accessory - For items that are parts of entire wheels, wheel axles
and other wheel accessories such as wheel covers.
Window - For the frame of an opening in a structure or vehicle that afford
the ability to see out. Note 7
Windscreen - For items used as the front window glass in vehicles, aircraft,
ships and trains for wind protection and which are not panels.
Wing - For items that perform the function of flight support for aircraft.
Note 8
Definitions – Section Miscellaneous
(Other) - For items that are specific to the BrickLink catalog. Note
9
Notes:
1. Certainly this cannot be correct in terms of parts for vehicles? Consider
adding parts specific to vehicles as well.
2. A vehicle is by definition only something with wheels for land transport.
Consider rather moving the aircraft section out.
3. Vehicles do not have mud guards, so the combination of parts that make up
the wheel well and its cover (fender, fender flares) are used by definition.
There are presently no parts that make up a quarter panel. Mudguards are only
in use by cycles by definition. Some of the fast food racer parts are bases?
4. To avoid the circular definition. Unless stated as bricks, modified bricks,
slopes, inverted slopes, etc it is maybe easier to just exclude plates from being
wedges.
5. To avoid the circular definition.
6. The hub is only the thing to which spokes are connected and is not for all
wheels. Also, not all wheels get tire and tread (trolley wheels).
7. The opening itself is generally accepted as the window and the frame into
which the glass is placed is the window frame. I might still be better to combine
these with door frames as just frames.
8. Flight management is, respectfully, performed by rudders and ailerons
9. The death knell of a good catalogue – other?? Good thing they are last Those
are only BrickLink entries.
|
|
| Author: | yorbrick | | Posted: | May 13, 2020 12:19 | | Subject: | Re: Category Definitions Discussion - Parts P - R | | Viewed: | 26 times | | Topic: | Catalog | |
|
| .
| |
I'd shorten the definition to say two or more blades that spin around. Even then
what about the individual blades that are listed there?
|
|
|
| Author: | yorbrick | | Posted: | May 13, 2020 12:18 | | Subject: | Re: Category Definitions Discussion - Parts P - R | | Viewed: | 33 times | | Topic: | Catalog | |
|
| | | Propeller - For items with two or more blades that spin round at speed
to provide movement or control for ships, boats and aircraft. Note 8
|
What about submarines, spacecraft or land based vehicles such as high speed cars.
I don't think the definitions should be so focussed.
Then there are these types ...
Introduced as windmill / turbines.
If shorten the definition to say two of more blades that spin around. Even then
what about the individual blades that are listed there?
|
|
| Author: | StormChaser | | Posted: | May 13, 2020 09:59 | | Subject: | Re: Category Definitions Discussion - Parts P - R | | Viewed: | 35 times | | Topic: | Catalog | |
|
| In Catalog, bje writes:
I'm working on this now, but I have to say that this whole enterprise of
defining categories makes me think very much of this:
https://www.youtube.com/watch?v=LFrdqQZ8FFc
|
|
| Author: | bje | | Posted: | May 13, 2020 07:54 | | Subject: | Re: Category Definitions Discussion - Parts P - R | | Viewed: | 52 times | | Topic: | Catalog | |
|
| A word on plates:
Some plates are not complete in the number of studs as to the size of the plate.
See for example or what are currently some parts classed as tiles.
The TLG definition of a part being 1/3 high should be carried over and plates
should be standard if it has studs completely over it length and width. But
the modified plate section presents a problem if plates are only to be 1/3 high
inclusive of the modification.
Definitions – Section P Parts
Panel - For items that have at least one flat surface to function as a divider
or wall, with or without studs on top.
Paper - For items made of paper or card. Note 1
Plant - For shrubs, stems, leaves, flowers, vines, roots, and related
items and accessories, excluding trees.
Plant, Tree - For plants with wooden trunks, including stumps. Note
2
Plastic - For items made of thin, flexible plastic sheets. Note 3
Plate - For items which are one third the height of a brick with straight
sides, square corners and studs covering the entire top. Note 4
Plate, Modified - For plates that do not have studs entirely over the
top and/or include some attachment or shape modification which can make it higher.
Note 5
Plate, Round - For plates that have one or more rounded corners and with
or without attachments and/or modifications. Note 6
Pneumatic - For items that produce or use pressurized air to perform mechanical
functions and their accessories. Note 7
Projectile Launcher - For any item that serves the primary function of
launching a projectile, their accessories and projectiles made to fit.
Propeller - For items with two or more blades that spin round at speed
to provide movement or control for ships, boats and aircraft. Note 8
Definitions – Section R Parts
Riding Cycle - For bicycles, motorcycles, scooters, tricycles and ATV's
and their accessories.
Ring - For circular items with or without attachments.
Road Sign - For items which are the unadorned backing of decorations such
as signs, notices, signboards or warnings. Note 9.
Rock - For items resembling single rocks or clusters of rocks, including
decorative items carved from rock, jewels, and rock-like ice formations.
Roof - For items primarily designed to protectively cover a structure
and their accessories. Note 10
Rubber Band & Belt - For elastic items and their accessories that are
typically used to perform a mechanical function in a model. Note 11
Notes:
1. Used the same wording as for felt, foam etc.
2. Trunk being the modifier here. Some leaves and top parts to move to the plant
category, unless tree leaves and stems are to be included in the tree definition?
3. Used the same wording as for felt, foam, paper etc.
4. See opening remarks, also to exclude modifications
5. See opening remarks, also to include modifications;
6. Round plates have round corners and modifications added unless new category
for modified round plates are made
7. Pneumatic uses pressurized air for mechanical function
8. Cowlings, housings etc should rather be under the aircraft or boat section,
see engine parts already there.
9. The undecorated parts respectfully does not actually function as the warning
or notice by itself. The decoration is required for the current definition,
which is then only applicable to decorated parts. What is in the category are
the plain backings used for the signage
10. These are only structural roofs
11. Elastic used as these bands and belts return to their original shape and
are not designed to be permanently stretched.
|
|
| Author: | bje | | Posted: | May 12, 2020 12:48 | | Subject: | Re: Category Definitions Discussion - Parts S sect | | Viewed: | 39 times | | Topic: | Catalog | |
|
| As requested the S and T sections to follow.
Quick discussion for slopes:
A slope can be viewed as a special modified brick (item with 4 straight sides
and studs on top) with at least one side of it being an angle. This precludes
some parts from being slopes altogether as anything without a stud on top will
then be a curve to allow for continuous or joined lines. So in this view a slope
is a brick with at least one side set at an angle and a curve would be anything
that is not a slope brick; or
A slope is a type of part all by itself, in which case the only differential
must be angles vs curves. In this view a slope is an item with angled sides,
with or without top studs. A sloped curve will then be an item with curved sides,
with or without top studs and with or without modification.
Curves as a stand alone category was not considered. An angle should refer to
a straight line not on the horizontal or vertical plane, and a curve to a line
which bends continuously with no straight parts. Given this I went with slopes
and curves being items by themselves, rather than to contort brick definitions
to fit a description or to create new categories.
Definitions – Section S parts
Scala, Figure Accessory - For items of clothing and other accessories
intended to be worn or used by Scala figures. Note 1
Slide - For items with a smooth, sloping side which allows quick travel
from higher to lower elevations. Note 2
Slope - For items with one or more sides angled from bottom to top, with
or without studs on top. Note 3
Slope, Curved - For items with one or more curved sides, with or without
studs on top. Note 4
Slope, Inverted - For items with one or more sides angled from top to
bottom and which may include an attachment or modification. Note 5
Soft Bricks - For sets and other items featuring large bricks and accessories
created from soft plastic and released from the late 1990s to the mid 2010s.
Note 6
Special Assembly – For items from specific sets which is an identifiably
complete usable part of the set including complete vehicles and complete larger
scale figures and – animals, but excluding buildings and recognized part assemblies.
Note 7
Spring - For items which are coiled, can be compressed and will return
to their usual shape once released. Note 8
Stairs - For items that a complete set of steps that leading from one
level to another, or for the individual steps in a stairs. Note 9
Sticker Over Assembly - For stickers that require more than one part to complete
the adhesive surface. Note 10
Sticker Sheet – All of the stickers included in a set as attached to the
complete adhesive backing paper/s for that set. Note 11
String - For items which are thin lengths of cord. Note 12
String Reel / Winch - For spools or spool and crank assemblies using string
for hoisting and items which use string to function such as fire hoses, tow hooks,
and similar items. Note 13
Support - For items which function to hold or carry the weight of other
items or structures to stop those from falling. Note 14
Notes:
1. Used the same wording as for Belville, Figure Accessory
2. By definition, the support accessories are excluded and should rather be supports,
similar to stair supports. It is not just figures which use slides; slides are
often used in materials handling as well.
3. See opening notes. Hinges should move to the hinge category same as hinge
bricks etc.
4. See opening notes
5. The inverse is created by the angle, not the position of the studs or attachment.
Also include the modifier so as to avoid a category for modified slopes.
6. Soft materials can refer to felt, cloth or foam as well.
7. Vehicles for this includes planes, trains, boats and motor vehicles. Presumably
the definition of figure is sufficient to exclude complete minifigures from being
special assemblies. Part assemblies excluded so as to exclude wheel and tire
assemblies.
8. So as to exclude items such as rubber tires which also satisfies the definition
of compressed energy
9. The US definition is used throughout.
10. Note, the definitions are not alphabetical, followed the catalogue page rather.
This from the definition of a sticker which require a surface for adhesion.
11. The sticker sheet is the collective of all of the stickers as included in
sets on the original backing paper, so as to exclude single stickers from any
one set being in the definition.
12. With respect, the current definition is the definition of a cord, not a string
13. Removed the circular definitions of winches
14. Removed the circular reference to support.
|
|
| Author: | randyipp | | Posted: | May 10, 2020 11:54 | | Subject: | Re: Minifig torsos no clutch | | Viewed: | 33 times | | Topic: | Catalog | |
|
| In Catalog, Zab3uk75 writes:
| | Hi
Just wondering whether this is a different catalog number for torsos with no
clutch or would I need to mention this in my listing?
Thanks
Stay safe everyone
June
|
If you are referring to the ribs inside the torso there are no separate part
numbers for that.
|
| Author: | Zab3uk75 | | Posted: | May 10, 2020 11:22 | | Subject: | Minifig torsos no clutch | | Viewed: | 86 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi
Just wondering whether this is a different catalog number for torsos with no
clutch or would I need to mention this in my listing?
Thanks
Stay safe everyone
June
|
| Author: | randyf | | Posted: | May 9, 2020 19:42 | | Subject: | Re: Pieces and technique used | | Viewed: | 36 times | | Topic: | Catalog | |
|
| In Catalog, biomajor09 writes:
| | Hi!
I am just starting to get into MOCs. Can anyone tell me what pieces they use
to hold up the flags?
Thanks so much!
|
It looks like short bars like
placed into something like
Cheers,
Randy
|
| Author: | biomajor09 | | Posted: | May 9, 2020 12:39 | | Subject: | Pieces and technique used | | Viewed: | 59 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi!
I am just starting to get into MOCs. Can anyone tell me what pieces they use
to hold up the flags?
Thanks so much!
|
|
| Author: | Stellar | | Posted: | May 7, 2020 04:09 | | Subject: | Re: Ants | | Viewed: | 54 times | | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| | In Catalog, hpoort writes:
| | Except for the coloring, is there any difference between 62575cx1 and 23714?
|
In response to your concerns, the following two changes were just made:
1. The item number of 62575cx1 was changed to 62575pb01.
2. A relationship match was added for parts 62575pb01 and 23714.
|
Be careful when removing Peeron IDs...
https://www.bricklink.com/messageThread.asp?ID=265395&nID=1187214
|
|
| Author: | SylvainLS | | Posted: | May 7, 2020 03:50 | | Subject: | Re: Ants | | Viewed: | 40 times | | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| | […]
I would be willing to bet that somewhere on those two parts there is a tiny difference.
I can't think of any instance at the moment where a new item number was
assigned by TLG without there being some kind of difference. Here it may just
be the marbling, though. […]
|
Two injection points instead of one?
|
|
| Author: | randyf | | Posted: | May 7, 2020 00:30 | | Subject: | Re: Ants | | Viewed: | 50 times | | Topic: | Catalog | |
|
| In Catalog, randyf writes:
| | In Catalog, StormChaser writes:
| | In Catalog, Adjour writes:
| | Well I'm going to eat my words here, but I have a defense, I think I was
thinking of the spiders, I'm so sorry for my confidence when I was clearly
wrong.
|
Ah, it's okay. We all make mistakes.
| | I pulled out both ants, I have them in hand and they are indeed identical mold.
|
I would be willing to bet that somewhere on those two parts there is a tiny difference.
I can't think of any instance at the moment where a new item number was
assigned by TLG without there being some kind of difference. Here it may just
be the marbling, though.
Either way, I removed the relationship match because it would be prohibited for
parts that only have a difference in color or pattern. I also added 23714pb01
as an alternate item number for the newer part.
|
Since
is the *older* part, it should not have the alternate item number. It would have
never been made in the new mold, which is
|
I guess I should have finished my thoughts before hitting "Post".
Basically, I would just keep the original ant numbered 62575pb01 with *no* alternate
item number, keep the new ant numbered 23714 with *no* alternate item number,
and reinstate the relationship between them.
|
|
| Author: | randyf | | Posted: | May 7, 2020 00:23 | | Subject: | Re: Ants | | Viewed: | 46 times | | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| | In Catalog, Adjour writes:
| | Well I'm going to eat my words here, but I have a defense, I think I was
thinking of the spiders, I'm so sorry for my confidence when I was clearly
wrong.
|
Ah, it's okay. We all make mistakes.
| | I pulled out both ants, I have them in hand and they are indeed identical mold.
|
I would be willing to bet that somewhere on those two parts there is a tiny difference.
I can't think of any instance at the moment where a new item number was
assigned by TLG without there being some kind of difference. Here it may just
be the marbling, though.
Either way, I removed the relationship match because it would be prohibited for
parts that only have a difference in color or pattern. I also added 23714pb01
as an alternate item number for the newer part.
|
Since
is the *older* part, it should not have the alternate item number. It would have
never been made in the new mold, which is
|
|
| Author: | StormChaser | | Posted: | May 7, 2020 00:07 | | Subject: | Re: Category Definitions Discussion - Parts I - M | | Viewed: | 40 times | | Topic: | Catalog | |
|
| In Catalog, bje writes:
Got these done. I've been line-editing the remaining sections as I go and
am done now with everything but the S and T sections.
|
|
| Author: | StormChaser | | Posted: | May 6, 2020 23:04 | | Subject: | Re: Ants | | Viewed: | 50 times | | Topic: | Catalog | |
|
| In Catalog, Adjour writes:
| | Well I'm going to eat my words here, but I have a defense, I think I was
thinking of the spiders, I'm so sorry for my confidence when I was clearly
wrong.
|
Ah, it's okay. We all make mistakes.
| | I pulled out both ants, I have them in hand and they are indeed identical mold.
|
I would be willing to bet that somewhere on those two parts there is a tiny difference.
I can't think of any instance at the moment where a new item number was
assigned by TLG without there being some kind of difference. Here it may just
be the marbling, though.
Either way, I removed the relationship match because it would be prohibited for
parts that only have a difference in color or pattern. I also added 23714pb01
as an alternate item number for the newer part.
|
|
| Author: | wildchicken13 | | Posted: | May 6, 2020 22:59 | | Subject: | Re: Ants | | Viewed: | 42 times | | Topic: | Catalog | |
|
| In Catalog, WoutR writes:
| | In Catalog, StormChaser writes:
| | In Catalog, hpoort writes:
| | Except for the coloring, is there any difference between [p=62575cx1] and ?
|
Without having both parts to examine, I cannot say. But any differences would
likely be extremely minor.
| | Also, how do we go about numbering in such a case in general?
|
We haven't updated this page yet, but everything about item numbering is
here:
https://www.bricklink.com/help.asp?helpID=168
| | 62575 is the LEGO
design number for the marbled version, 23714 for the plain version. Is the former
really seen as an assembly (cx1)?
|
No, this is clearly not an assembly. It was renumbered to maintain compatibility
with Peeron. This happened in 2010 before Peeron died.
| | I would suggest 62575cx1 renumbered to 23714pb01 and 62575 listed as an alternative
number. Before making such a request, I'd like to be sure about any differences
and guide lines.
|
I think this is a reasonable request and I see no reason why it should not be
accommodated. If no one objects within the next day or so I'll make it happen.
| | I know the catalog team has different priorities right now
|
I am not a spokesperson for the team, but I think it would be fair to say that
our priority is always the catalog and any issues that affect it.
|
https://brickset.com/parts/design-62575
https://brickset.com/parts/design-23714
I would suggest that we use the designID that LEGO uses as the main partnumber.
23714 for the plain version,
62575* for the multicolored version with 23714pb* as an alternate,
and a catalog relationship between them.
|
I wonder why we don't do this already. In most instances they are the same,
but sometimes they are not. I guess it is probably cases like this where the
LEGO Group uses two different part numbers for what is essentially an identical
part, but for the sake of catalog consistency, it would make sense to use the
official LEGO Part ID for all parts with a suffix (a, b, c, etc.) to distinguish
between different variants.
|
|
| Author: | Adjour | | Posted: | May 6, 2020 22:43 | | Subject: | Re: Ants | | Viewed: | 44 times | | Topic: | Catalog | |
|
| I hope this photo putting this to rest makes up for my stupid mistake. Sorry
again
|
|
| Author: | Adjour | | Posted: | May 6, 2020 22:37 | | Subject: | Re: Ants | | Viewed: | 45 times | | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| | In Catalog, hpoort writes:
| | Except for the coloring, is there any difference between 62575cx1 and 23714?
|
In response to your concerns, the following two changes were just made:
1. The item number of 62575cx1 was changed to 62575pb01.
2. A relationship match was added for parts 62575pb01 and 23714.
|
Well I'm going to eat my words here, but I have a defense, I think I was
thinking of the spiders, I'm so sorry for my confidence when I was clearly
wrong.
I pulled out both ants, I have them in hand and they are indeed identical mold.
|
|
| Author: | StormChaser | | Posted: | May 6, 2020 21:07 | | Subject: | Re: Ants | | Viewed: | 62 times | | Topic: | Catalog | |
|
| In Catalog, hpoort writes:
| | Except for the coloring, is there any difference between 62575cx1 and 23714?
|
In response to your concerns, the following two changes were just made:
1. The item number of 62575cx1 was changed to 62575pb01.
2. A relationship match was added for parts 62575pb01 and 23714.
|
| Author: | LordSkylark | | Posted: | May 6, 2020 14:05 | | Subject: | Re: Dual molded arms | | Viewed: | 38 times | | Topic: | Catalog | |
|
| In Catalog, hpoort writes:
I've always thought it should be reversed, as most arms base would be either
yellow or flesh, therefore limiting the amount of catelog entries drastically.
|
|
| Author: | SylvainLS | | Posted: | May 6, 2020 10:34 | | Subject: | Re: Dual molded arms | | Viewed: | 29 times | | Topic: | Catalog | |
|
| In Catalog, hpoort writes:
| |
[…]
The choice is of course arbitrary, but during this catalog project, would it
be wise to adapt to LDraw's (and thus Studio's) choice?
|
+1
IIRC, LDraw’s rationale was that the upper part is a sleeve, so the main colour
is the one used on the lower part: the arm (and hand) is yellow with a blue/red/white/…
(short) sleeve.
|
|
|
| Author: | krysto2002 | | Posted: | May 4, 2020 16:07 | | Subject: | Re: search | | Viewed: | 21 times | | Topic: | Catalog | |
|
| In Catalog, skikyssing writes:
| | I'm not getting the suggestions in the drop down box when typing in searches
anymore...
It seems that this is for everyone.
Why do you have to change something that works perfectly? 
|
I've noticed a few major changes to the searchbar myself, all for the worse.
Previews only appear in the search bar when you type in the set number, not the
set name (which kind of defeats the purpose of it, since who memorizes those
anyways?).
Furthermore, when using the search engine now, you only get results that exactly
match the search string. Searching "Spoke" for example only gets me parts containing
"Spoke" and not "Spokes" or "Spoked", likewise I couldn't find the "Mission
Commander" set in a search for "Mission Command".
These changes are super unhelpful, especially to new users who might be coming
to look for something but not certain of exactly what it's called, especially
since naming conventions for parts aren't entirely consistent over the decades
of them being added.
|
|
| Author: | crazylegoman | | Posted: | May 3, 2020 18:59 | | Subject: | Re: Ants | | Viewed: | 53 times | | Topic: | Catalog | |
|
| In Catalog, BigBBricks writes:
| | In Catalog, crazylegoman writes:
| | In Catalog, Adjour writes:
| | In Catalog, hpoort writes:
| | Except for the coloring, is there any difference between [p=62575cx1] and ?
Also, how do we go about numbering in such a case in general? 62575 is the LEGO
design number for the marbled version, 23714 for the plain version. Is the former
really seen as an assembly (cx1)?
I would suggest 62575cx1 renumbered to 23714pb01 and 62575 listed as an alternative
number. Before making such a request, I'd like to be sure about any differences
and guide lines.
And yes, Robert, I know the catalog team has different priorities right now,
but this one just came up and I wonder.
|
I have both of these. They look different in person. I don't have them in
front of me at the moment but one sits taller and one looks longer.
|
I am in favor of renaming the newer one (or maybe both) in a way that designates
that one is taller and one is longer.
David
|
Aren't they different materials? If memory serves the marbled one is a lot
less ridgid that the solid.
|
I don't have the Ant-Man Final Battle set, so I can't say.
David
|
|
| Author: | BigBBricks | | Posted: | May 3, 2020 17:56 | | Subject: | Re: Ants | | Viewed: | 64 times | | Topic: | Catalog | |
|
| In Catalog, crazylegoman writes:
| | In Catalog, Adjour writes:
| | In Catalog, hpoort writes:
| | Except for the coloring, is there any difference between [p=62575cx1] and ?
Also, how do we go about numbering in such a case in general? 62575 is the LEGO
design number for the marbled version, 23714 for the plain version. Is the former
really seen as an assembly (cx1)?
I would suggest 62575cx1 renumbered to 23714pb01 and 62575 listed as an alternative
number. Before making such a request, I'd like to be sure about any differences
and guide lines.
And yes, Robert, I know the catalog team has different priorities right now,
but this one just came up and I wonder.
|
I have both of these. They look different in person. I don't have them in
front of me at the moment but one sits taller and one looks longer.
|
I am in favor of renaming the newer one (or maybe both) in a way that designates
that one is taller and one is longer.
David
|
Aren't they different materials? If memory serves the marbled one is a lot
less ridgid that the solid.
|
|
| Author: | crazylegoman | | Posted: | May 3, 2020 16:14 | | Subject: | Re: Ants | | Viewed: | 55 times | | Topic: | Catalog | |
|
| In Catalog, Adjour writes:
| | In Catalog, hpoort writes:
| | Except for the coloring, is there any difference between [p=62575cx1] and ?
Also, how do we go about numbering in such a case in general? 62575 is the LEGO
design number for the marbled version, 23714 for the plain version. Is the former
really seen as an assembly (cx1)?
I would suggest 62575cx1 renumbered to 23714pb01 and 62575 listed as an alternative
number. Before making such a request, I'd like to be sure about any differences
and guide lines.
And yes, Robert, I know the catalog team has different priorities right now,
but this one just came up and I wonder.
|
I have both of these. They look different in person. I don't have them in
front of me at the moment but one sits taller and one looks longer.
|
I am in favor of renaming the newer one (or maybe both) in a way that designates
that one is taller and one is longer.
David
|
|
| Author: | Adjour | | Posted: | May 3, 2020 14:01 | | Subject: | Re: Ants | | Viewed: | 40 times | | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| | In Catalog, hpoort writes:
| | Except for the coloring, is there any difference between [p=62575cx1] and ?
|
Without having both parts to examine, I cannot say. But any differences would
likely be extremely minor.
|
Yeah, they are different molds, its hard to see in the photo but in person they
are clearly not the same part
|
|
| Author: | Adjour | | Posted: | May 3, 2020 14:00 | | Subject: | Re: Ants | | Viewed: | 49 times | | Topic: | Catalog | |
|
| In Catalog, hpoort writes:
| | Except for the coloring, is there any difference between [p=62575cx1] and ?
Also, how do we go about numbering in such a case in general? 62575 is the LEGO
design number for the marbled version, 23714 for the plain version. Is the former
really seen as an assembly (cx1)?
I would suggest 62575cx1 renumbered to 23714pb01 and 62575 listed as an alternative
number. Before making such a request, I'd like to be sure about any differences
and guide lines.
And yes, Robert, I know the catalog team has different priorities right now,
but this one just came up and I wonder.
|
I have both of these. They look different in person. I don't have them in
front of me at the moment but one sits taller and one looks longer.
|
|
| Author: | hpoort | | Posted: | May 3, 2020 12:56 | | Subject: | Re: Ants | | Viewed: | 49 times | | Topic: | Catalog | |
|
| In Catalog, WoutR writes:
| | In Catalog, StormChaser writes:
| | In Catalog, hpoort writes:
| | Except for the coloring, is there any difference between [p=62575cx1] and ?
|
Without having both parts to examine, I cannot say. But any differences would
likely be extremely minor.
| | Also, how do we go about numbering in such a case in general?
|
We haven't updated this page yet, but everything about item numbering is
here:
https://www.bricklink.com/help.asp?helpID=168
| | 62575 is the LEGO
design number for the marbled version, 23714 for the plain version. Is the former
really seen as an assembly (cx1)?
|
No, this is clearly not an assembly. It was renumbered to maintain compatibility
with Peeron. This happened in 2010 before Peeron died.
| | I would suggest 62575cx1 renumbered to 23714pb01 and 62575 listed as an alternative
number. Before making such a request, I'd like to be sure about any differences
and guide lines.
|
I think this is a reasonable request and I see no reason why it should not be
accommodated. If no one objects within the next day or so I'll make it happen.
| | I know the catalog team has different priorities right now
|
I am not a spokesperson for the team, but I think it would be fair to say that
our priority is always the catalog and any issues that affect it.
|
https://brickset.com/parts/design-62575
https://brickset.com/parts/design-23714
I would suggest that we use the designID that LEGO uses as the main partnumber.
23714 for the plain version,
62575* for the multicolored version with 23714pb* as an alternate,
and a catalog relationship between them.
|
That makes sense to me, but it would set a new standard. Probably in line with
what BL would want for XP, but not how it is classically done.
Specifically which type of relationship can we currently choose?
The relation between plain parts and their multicolored, stickered or printed
versions on Bricklink is currently an implied relation only, by means of the
part number. There should be a new relation type defined for this relation type.
Is this in reach of the current catalog admin? And then to systematically set
the relation between each patterned part and it's base part.
|
|
| Author: | WoutR | | Posted: | May 3, 2020 12:30 | | Subject: | Re: Ants | | Viewed: | 48 times | | Topic: | Catalog | |
|
| I do not see a designID on the multicolored ants.
[p=62575cx1]
|
|
| Author: | WoutR | | Posted: | May 3, 2020 12:29 | | Subject: | Re: Ants | | Viewed: | 55 times | | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| | In Catalog, hpoort writes:
| | Except for the coloring, is there any difference between [p=62575cx1] and ?
|
Without having both parts to examine, I cannot say. But any differences would
likely be extremely minor.
| | Also, how do we go about numbering in such a case in general?
|
We haven't updated this page yet, but everything about item numbering is
here:
https://www.bricklink.com/help.asp?helpID=168
| | 62575 is the LEGO
design number for the marbled version, 23714 for the plain version. Is the former
really seen as an assembly (cx1)?
|
No, this is clearly not an assembly. It was renumbered to maintain compatibility
with Peeron. This happened in 2010 before Peeron died.
| | I would suggest 62575cx1 renumbered to 23714pb01 and 62575 listed as an alternative
number. Before making such a request, I'd like to be sure about any differences
and guide lines.
|
I think this is a reasonable request and I see no reason why it should not be
accommodated. If no one objects within the next day or so I'll make it happen.
| | I know the catalog team has different priorities right now
|
I am not a spokesperson for the team, but I think it would be fair to say that
our priority is always the catalog and any issues that affect it.
|
https://brickset.com/parts/design-62575
https://brickset.com/parts/design-23714
I would suggest that we use the designID that LEGO uses as the main partnumber.
23714 for the plain version,
62575* for the multicolored version with 23714pb* as an alternate,
and a catalog relationship between them.
|
|
| Author: | StormChaser | | Posted: | May 3, 2020 10:51 | | Subject: | Re: Ants | | Viewed: | 63 times | | Topic: | Catalog | |
|
| In Catalog, hpoort writes:
| | Except for the coloring, is there any difference between [p=62575cx1] and ?
|
Without having both parts to examine, I cannot say. But any differences would
likely be extremely minor.
| | Also, how do we go about numbering in such a case in general?
|
We haven't updated this page yet, but everything about item numbering is
here:
https://www.bricklink.com/help.asp?helpID=168
| | 62575 is the LEGO
design number for the marbled version, 23714 for the plain version. Is the former
really seen as an assembly (cx1)?
|
No, this is clearly not an assembly. It was renumbered to maintain compatibility
with Peeron. This happened in 2010 before Peeron died.
| | I would suggest 62575cx1 renumbered to 23714pb01 and 62575 listed as an alternative
number. Before making such a request, I'd like to be sure about any differences
and guide lines.
|
I think this is a reasonable request and I see no reason why it should not be
accommodated. If no one objects within the next day or so I'll make it happen.
| | I know the catalog team has different priorities right now
|
I am not a spokesperson for the team, but I think it would be fair to say that
our priority is always the catalog and any issues that affect it.
|
|
| Author: | whoa220 | | Posted: | May 3, 2020 10:15 | | Subject: | Re: Ants | | Viewed: | 53 times | | Topic: | Catalog | |
|
| | Honestly I think they are the same lego peace but recolered. |
| Author: | hpoort | | Posted: | May 3, 2020 10:06 | | Subject: | Ants | | Viewed: | 219 times | | Topic: | Catalog | | Status: | Open | |
|
| Except for the coloring, is there any difference between [p=62575cx1] and ?
Also, how do we go about numbering in such a case in general? 62575 is the LEGO
design number for the marbled version, 23714 for the plain version. Is the former
really seen as an assembly (cx1)?
I would suggest 62575cx1 renumbered to 23714pb01 and 62575 listed as an alternative
number. Before making such a request, I'd like to be sure about any differences
and guide lines.
And yes, Robert, I know the catalog team has different priorities right now,
but this one just came up and I wonder.
|
|
| Author: | StormChaser | | Posted: | May 2, 2020 10:51 | | Subject: | Re: Adding missing items to the catalog | | Viewed: | 44 times | | Topic: | Catalog | |
|
| In Catalog, aladar123 writes:
| | For those who might have this question.
Do not bother adding, if no photo it will be removed after some time.
|
It's true that we don't typically approve catalog entries without photos.
There are a few exceptions, though. We're currently working on updating
our catalog guidelines and plan to explicitly state those exceptions in the new
guidelines.
The reason we don't add items without photos is because past experience has
repeatedly shown us that we may never get a photo if we don't require one
up front. This happens not only for rare items, but for common items with multiple
for-sale listings.
This is a good example:
It's been in the catalog for 11 years and there are nine different sellers
with the part for sale, but none have sent us an image for the catalog.
|
|
| Author: | mokibricks | | Posted: | May 2, 2020 10:39 | | Subject: | Re: Adding missing items to the catalog | | Viewed: | 33 times | | Topic: | Catalog | |
|
| In Catalog, aladar123 writes:
| | Hi,
I recently bought a holder for trading cards, and it has a list of all the possible
cards (SW Series 2) with their numbers. Does it help if I add all the items to
the catalog? I have a few more where I will also add the images of the cards,
but in many cases, I won't.
Thanks,
Tamas
|
For those who might have this question.
Do not bother adding, if no photo it will be removed after some time.
Tamas
|
|
| Author: | James2506 | | Posted: | May 1, 2020 20:32 | | Subject: | Re: Why oh why Batman Sh016b | | Viewed: | 39 times | | Topic: | Catalog | |
|
| Thanks for such a long effort and providing other examples. I follow but don’t
agree - I think any change for a new part should equal a new number, but it’s
not up to me!
Catalog, Hygrotus writes:
| | In Catalog, axaday writes:
| | In Catalog, James2506 writes:
| | I think each variant should get a fresh number. Certainly the faces do even
though the rest of the fig remains the same. It just happened with Mr Freeze
too - the dark Peary grey now has two unique numbers when all that changed was
the neck bracket and weapon.
How do we ask Admins to consider changing the naming first given?
|
I am sure an admin will see this thread.
It's not a for sure thing. They also have to weigh in how it will affect
stores to have the name change. They may have labelled things. Just adding
a or b on the end is much gentler for that.
|
When minfigs assembly is exactly the same but there is just one minior change
in part variant minfigs is classified as variant minfig and gets a or b or c
if there are more variants.
In Batman case all three are the same just one part is in differnt part variant
in sh016 and sh016a and now sh016b is the same assembly as sh016a just cape is
in diffrent part variant. It is a quite common practice (not always consistent,
but I try to keep it consistent)
Minfigs gest new number when assembly is diffrent for example wjhen for this
Batmon would be added totally differnt part
Example with Mr Freeze is good it got nee number as assembly is different, this
minfig has additiona parts so it makes an assembly different.
so few example
assembly the same just the head has different color
assembly the same just cape variant changed
but
new numbers as totally different heads are in there
but when print on the head si only small variation minfig is consider also variant
and gets an a
* | | trn227 (Inv) Overalls with Tools in Pocket, Blue Legs, Red Short Bill Cap, Glasses with Brown Thin Eyebrows
Minifigures: Train |
brown eybrows vs red eyebrows, very minor difference beside that minfigs are
identical
recently added
these have different numbers as they are different assemblies, every one have
additional parts there, but for example if suddenly LEGO would start produce
cupcae in different mold variant and it would be discovered then one with mold
variant of such part would get variant with the same number and added a
when you look through catalog teher really a lot of "a" and "b" variants of minifigs
in very different themes
So important is how significant if change of similar character or minfigs. Slight
change, only different part variant but whole assembly the same. This is minfig
variant with the same number but with a added. Only slight change in prinbt also
only a variant. Significant print change or aditional parts added which makes
it different assembty, new number.
some more examples
only chane of color of the photoreceptor
but here more significant print change
ok there are meny meny more examples
so numeration of those batmans stays as they are as those minfigs hase the same
assemblies only parts are in different mold variants
normal cape vs spongy cape
type of mask also mold variant
the same here only mask mold change
but here different heads, so different assemblies and new numbers
(btw name should be change here to get rid of type 1, 2 and 3, describtion of
faces exspressions should be here as all heads have different prints like here
for example https://www.bricklink.com/catalogListOld.asp?pg=1&catString=971&catType=M&v=1)
Hope this is more clear now why ve have minfigs variants marked as a nad b
|
|
|
| Author: | BRCook | | Posted: | May 1, 2020 17:44 | | Subject: | Dimensions for instant checkout | | Viewed: | 45 times | | Topic: | Catalog | | Status: | Open | |
|
| I have had some issues with items not having size dimensions (particularly for
newer items - come up as 0x0x0 or ?x?x?).
This has caused me problems with instant checkout because even though there are
no dimensions it is not forcing a quote request (which is what I thought should
happen).
Anyone have any similar experiences or suggestions for a fix (Admins?)
Thanks in advance
Brendan
|
| Author: | skikyssing | | Posted: | May 1, 2020 04:50 | | Subject: | search | | Viewed: | 43 times | | Topic: | Catalog | | Status: | Open | |
|
| I'm not getting the suggestions in the drop down box when typing in searches
anymore...
It seems that this is for everyone.
Why do you have to change something that works perfectly?
|
|
| Author: | Hygrotus | | Posted: | Apr 30, 2020 12:39 | | Subject: | Re: Set 1775 alternative stickers | | Viewed: | 52 times | | Topic: | Catalog | |
|
| In Catalog, normann1974 writes:
| | I've just added [P=4867pb24] in hope that it will be accepted. Here's
a photo of the set. It's not mine, so I can't prove anything about it.
The building instructions are generic.
/Jan
|
Sticker of this set do not show such sticker
so for set
should be added stickered parts which have applied stickers from showed sticker
set and they are already there.
So question is if this set was in variants for other airlines like this one
https://www.bricklink.com/catalogListOld.asp?catID=67&catXrefLevel=0&catType=S&q=4032&catLike=W
There are 13 version of ser 4032 for diffrent ailines and each one have differebnt
sticker sheet.
So question is does this set also exists in variants for different airlines.
If yes then should be new set entry crated like in 4032 example. But for that
I think proof with boxed specimen would be needed?
Then such stickered part could be added for new set variant but not for current
1775 set.
I found only such informations about set 1775
- Promotional release with TWA and Qantas airlines.
- Also available in the US from LEGO Shop at Home.
I coudn't found any mentiones about promotional release for SAS.
Maybe it is internal release only for employees of SAS Hosting Service as it
is on sticker and they included for them exclusive sticker sheet?
These are my thoughts.
|
|
| Author: | pikachu3 | | Posted: | Apr 30, 2020 09:15 | | Subject: | Re: Help with this color | | Viewed: | 36 times | | Topic: | Catalog | |
|
| In Catalog, BrickPhaisan writes:
| | Hello, I am new here and I have a problem with part 3002, since I have two parts
of this color that I do not know very well how to classify. Let's see if
someone knows how to tell me what color it is? to me it looks blue-purple.
Thanks in advance
|
Hard to tell for sure without other colors in your photo to compare it to, but
it looks like this to me: https://www.flickr.com/photos/126975831@N07/15210784018
Technically it’s supposed to be Blue, but it’s a harder, more fragile plastic
that looks a bit darker than normal.
|
|
| Author: | StormChaser | | Posted: | Apr 30, 2020 09:04 | | Subject: | Re: Item Type Discussion | | Viewed: | 41 times | | Topic: | Catalog | |
|
| In Catalog, yorbrick writes:
| | Is this entire project now dead . . . ?
|
No, this project is not dead. We're still continually working on this page
and still planning to make it official on June 1st:
https://www.bricklink.com/help.asp?helpID=2487
|
|
| Author: | BrickPhaisan | | Posted: | Apr 30, 2020 08:18 | | Subject: | Re: Help with this color | | Viewed: | 29 times | | Topic: | Catalog | |
|
| In Catalog, BrickPhaisan writes:
| | Hello, I am new here and I have a problem with part 3002, since I have two parts
of this color that I do not know very well how to classify. Let's see if
someone knows how to tell me what color it is? to me it looks blue-purple.
Thanks in advance
|
He reviewed the entire catalog color by color of this type, and this figure does
not appear in those colors ...
|
|
| Author: | ErwinNL | | Posted: | Apr 30, 2020 08:05 | | Subject: | Re: Help with this color | | Viewed: | 32 times | | Topic: | Catalog | |
|
| In Catalog, BrickPhaisan writes:
| | Hello, I am new here and I have a problem with part 3002, since I have two parts
of this color that I do not know very well how to classify. Let's see if
someone knows how to tell me what color it is? to me it looks blue-purple.
Thanks in advance
|
I am not 100% sure (color in photo) but did you know about: https://www.bricklink.com/catalogColors.asp
|
|
| Author: | BrickPhaisan | | Posted: | Apr 30, 2020 08:03 | | Subject: | Help with this color | | Viewed: | 61 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello, I am new here and I have a problem with part 3002, since I have two parts
of this color that I do not know very well how to classify. Let's see if
someone knows how to tell me what color it is? to me it looks blue-purple.
Thanks in advance
|
|
| Author: | normann1974 | | Posted: | Apr 30, 2020 07:06 | | Subject: | Set 1775 alternative stickers | | Viewed: | 60 times | | Topic: | Catalog | | Status: | Open | |
|
| I've just added [P=4867pb24] in hope that it will be accepted. Here's
a photo of the set. It's not mine, so I can't prove anything about it.
The building instructions are generic.
/Jan
|
|
|
| Author: | yorbrick | | Posted: | Apr 30, 2020 04:49 | | Subject: | Re: Item Type Discussion | | Viewed: | 38 times | | Topic: | Catalog | |
|
| In Catalog, SylvainLS writes:
| | In Catalog, randyf writes:
| | […]
I had already questioned this in the admin forums yesterday. None of us even
knew this was happening, and we are as surprised as anyone else. We pretty much
got the rug pulled out from under us, and I honestly have no idea where we go
from here.
|
Change the buying process, don’t ask anything to experienced buyers.
Change the selling process, don’t ask anything to experienced sellers.
Change the catalogue, don’t ask anything to catalogue admins BL appointed!
“Hobby project” indeed.
|
I guess if you think about it, LEGO just made lego.com move up one place in the
best LEGO websites.
|
|
| Author: | SylvainLS | | Posted: | Apr 30, 2020 04:43 | | Subject: | Re: Item Type Discussion | | Viewed: | 37 times | | Topic: | Catalog | |
|
| In Catalog, randyf writes:
| | […]
I had already questioned this in the admin forums yesterday. None of us even
knew this was happening, and we are as surprised as anyone else. We pretty much
got the rug pulled out from under us, and I honestly have no idea where we go
from here.
|
Change the buying process, don’t ask anything to experienced buyers.
Change the selling process, don’t ask anything to experienced sellers.
Change the catalogue, don’t ask anything to catalogue admins BL appointed!
“Hobby project” indeed.
|
|
| Author: | yorbrick | | Posted: | Apr 30, 2020 04:43 | | Subject: | Re: Item Type Discussion | | Viewed: | 31 times | | Topic: | Catalog | |
|
| In Catalog, randyf writes:
| | In Catalog, yorbrick writes:
| | Is this entire project now dead, given LEGO has re-mapped the catalog to make
it logical for new users (new users that obviously have no interest at all in
themes, part types, etc)?
|
I had already questioned this in the admin forums yesterday. None of us even
knew this was happening, and we are as surprised as anyone else. We pretty much
got the rug pulled out from under us, and I honestly have no idea where we go
from here.
|
I guess it is time to save a "community catalog" again, before the old one is
removed and the re-mapped one becomes the new BL standard.
|
|
| Author: | randyf | | Posted: | Apr 30, 2020 04:36 | | Subject: | Re: Item Type Discussion | | Viewed: | 40 times | | Topic: | Catalog | |
|
| In Catalog, yorbrick writes:
| | Is this entire project now dead, given LEGO has re-mapped the catalog to make
it logical for new users (new users that obviously have no interest at all in
themes, part types, etc)?
|
I had already questioned this in the admin forums yesterday. None of us even
knew this was happening, and we are as surprised as anyone else. We pretty much
got the rug pulled out from under us, and I honestly have no idea where we go
from here.
|
|
| Author: | yorbrick | | Posted: | Apr 30, 2020 04:25 | | Subject: | Re: Item Type Discussion | | Viewed: | 42 times | | Topic: | Catalog | |
|
| Is this entire project now dead, given LEGO has re-mapped the catalog to make
it logical for new users (new users that obviously have no interest at all in
themes, part types, etc)?
|
|
| Author: | randyf | | Posted: | Apr 29, 2020 17:11 | | Subject: | Re: Item Type Discussion - Update 3 | | Viewed: | 31 times | | Topic: | Catalog | |
|
| In Catalog, bje writes:
| | In Catalog, randyf writes:
| | In Catalog, Turez writes:
| | | | The sets/gear distinctions isn't figured out yet
|
Why not use the differentation which is already written under Specific Considerations
and Exceptions?
"Items are sets when significantly brick-built [...]."
|
The problem is now in defining what "significantly brick-built" is since that
is open to interpretation.
|
Not glued for one. Consisting of mostly parts in the parts catalogue (gear parts
are gear at this time) for two. Also having instructions might help.
Also, since we seem to be moving to having defined figures types, are we going
to see inventory pages upated for figures, which can then include animals, large
figures and minifigures etc, or are we getting a definition for figures in the
help pages and then lumping eveything on the inventory pages under minifigs?
|
The "Minifigs" section in the inventories would need to be renamed, also. This
would go along with having the main item type renamed. We would also have to
figure out where else the term "Minifigs" is in use in any other parts of the
site to have it coincide with these changes. All of these things will require
assistance from the BrickLink team once our plan is finalized.
Cheers,
Randy
|
|
| Author: | bje | | Posted: | Apr 29, 2020 17:04 | | Subject: | Re: Item Type Discussion - Update 3 | | Viewed: | 31 times | | Topic: | Catalog | |
|
| In Catalog, randyf writes:
| | In Catalog, Turez writes:
| | | | The sets/gear distinctions isn't figured out yet
|
Why not use the differentation which is already written under Specific Considerations
and Exceptions?
"Items are sets when significantly brick-built [...]."
|
The problem is now in defining what "significantly brick-built" is since that
is open to interpretation.
|
Not glued for one. Consisting of mostly parts in the parts catalogue (gear parts
are gear at this time) for two. Also having instructions might help.
Also, since we seem to be moving to having defined figures types, are we going
to see inventory pages upated for figures, which can then include animals, large
figures and minifigures etc, or are we getting a definition for figures in the
help pages and then lumping eveything on the inventory pages under minifigs?
|
|
| Author: | randyf | | Posted: | Apr 29, 2020 16:47 | | Subject: | Re: Item Type Discussion - Update 3 | | Viewed: | 30 times | | Topic: | Catalog | |
|
| In Catalog, Turez writes:
| | | | The sets/gear distinctions isn't figured out yet
|
Why not use the differentation which is already written under Specific Considerations
and Exceptions?
"Items are sets when significantly brick-built [...]."
|
The problem is now in defining what "significantly brick-built" is since that
is open to interpretation.
|
|
| Author: | randyf | | Posted: | Apr 29, 2020 16:42 | | Subject: | Re: Item Type Discussion - Update 2 | | Viewed: | 29 times | | Topic: | Catalog | |
|
| In Catalog, infinibrix writes:
| | In Catalog, randyf writes:
| | In Catalog, infinibrix writes:
| | However if the six main catalog entries is all you currently have to work with
and it’s kind of a quick fix then I understand why you feel the need to continue
with your current plan of changes but correct me if I’m wrong but I get the impression
that you do not envisage there ever being much need to extend beyond the six
catelog entries which seems a bit short sighted when you have so many very different
items bundled together like this?
|
This is essentially the crux of the matter. To go beyond the six main item types
would take significant reprogramming of the site, and that is just not going
to happen. So it isn't that we in the catalog don't want to provide better
solutions, it is that we in the catalog can only provide solutions that don't
require significant reprogramming and fit in the context of what we have. In
this sense, the "Minifigs" item type cannot be expanded upon to create more item
types and must be looked at as it stands. And as it stands, "Minifigs" does not
accurately describe what is cataloged under that type, nor has it for a long
time. The easiest solution is to rename it "Figures" to accurately describe what
is cataloged under that type and then come up with guidelines for what can be
a figure. I hope that explains things a bit better from where we are coming from.
Cheers,
Randy
|
Okay thanks Randy I understand but you never know perhaps Lego will one day put
a team together to work on improving theses things
|
Oh yeah. That is definitely the hope!
We would love to revisit these discussions in the future if we were to get developers
assigned to us. However, with the current problems currently cropping up from
some changes that seem to going on behind the scenes, I am less than confident
that the current team at BrickLink are up to the task of completely redesigning
the database and structure of the site which your suggestions would entail.
Thank you for all of your thoughts in this discussion, though. They are very
much appreciated and help to drive us forward.
Cheers,
Randy
|
|
| Author: | Turez | | Posted: | Apr 29, 2020 16:39 | | Subject: | Re: Item Type Discussion - Update 3 | | Viewed: | 31 times | | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| | In Catalog, StormChaser writes:
| | We're considering the possibility of updating the page defining item types
on June 1st when we add the new category definitions.
|
There were two things that were contentious: how to classify figures and the
distinction between sets and gear. The sets/gear distinctions isn't figured
out yet, but there is progress on figures. Share what you think:
https://www.bricklink.com/help.asp?helpID=2487
|
Looks good to me. The detailed figure classification is much better than a one-sentence-definition
and makes future adjustments easier (hopefully).
Just two thoughts (in addition to Jean's comment):
"Transformed Humans - Humans in another form are figures. A person transformed
into a rat is an example of this distinction and is a figure."
I would leave that out for at least four reasons:
- We would have duplicate catalog entries because the rat
would be a figure in some sets and a part in other sets.
- It was not always clear that the rat is a human in some sets. If you ask me,
the catalog classification should not depend too much on how a story develops.
Otherwise we would always be at risk of misclassifying things just because the
next part of a story hasn't been published yet.
- There is a (minior, but anyway) risk that the classification would be a spoiler
for anyone who don't know the story background yet.
- There is a gray rat in
but it is unknown if it is *the* rat or a normal animal (other versions of Hagrid's
Hut contain normal rats).
"Figure Size - There are currently no restrictions on size or complexity of figures."
I think there should be a restriction so that the content of a set like
cannot be classified as a figure. I would also say that large brick-built figures
which consists of a significant number of parts from a set should not have an
entry under the figures category. After all they would cause similar inventory
problems like Special Assemblies ( https://www.bricklink.com/message.asp?ID=1188426
). And to have brick-built figures without an inventory is not really an option
(sellers want to check if a figure is complete and buyers want to know which
parts they get when buying a figure).
Example: The mech in
should not be a figure simply because of its size and part count.
(This is what I wanted to say with "small" in my previous answer.)
------------------------
| | The sets/gear distinctions isn't figured out yet
|
Why not use the differentation which is already written under Specific Considerations
and Exceptions?
"Items are sets when significantly brick-built [...]."
|
|
| Author: | infinibrix | | Posted: | Apr 29, 2020 16:32 | | Subject: | Re: Item Type Discussion - Update 2 | | Viewed: | 28 times | | Topic: | Catalog | |
|
| In Catalog, randyf writes:
| | In Catalog, infinibrix writes:
| | However if the six main catalog entries is all you currently have to work with
and it’s kind of a quick fix then I understand why you feel the need to continue
with your current plan of changes but correct me if I’m wrong but I get the impression
that you do not envisage there ever being much need to extend beyond the six
catelog entries which seems a bit short sighted when you have so many very different
items bundled together like this?
|
This is essentially the crux of the matter. To go beyond the six main item types
would take significant reprogramming of the site, and that is just not going
to happen. So it isn't that we in the catalog don't want to provide better
solutions, it is that we in the catalog can only provide solutions that don't
require significant reprogramming and fit in the context of what we have. In
this sense, the "Minifigs" item type cannot be expanded upon to create more item
types and must be looked at as it stands. And as it stands, "Minifigs" does not
accurately describe what is cataloged under that type, nor has it for a long
time. The easiest solution is to rename it "Figures" to accurately describe what
is cataloged under that type and then come up with guidelines for what can be
a figure. I hope that explains things a bit better from where we are coming from.
Cheers,
Randy
|
Okay thanks Randy I understand but you never know perhaps Lego will one day put
a team together to work on improving theses things
|
|
| Author: | Hygrotus | | Posted: | Apr 29, 2020 16:03 | | Subject: | Re: 75149 need sticker counter parts added | | Viewed: | 25 times | | Topic: | Catalog | |
|
| In Catalog, POPS_BLOCK_SHOP writes:
| | Looked up set 75149 Star Wars and there are no counter parts for the stickers.
How can these be added? I have all of them.
|
https://www.bricklink.com/message.asp?ID=1191009
|
| Author: | POPS_BLOCK_SHOP | | Posted: | Apr 29, 2020 15:59 | | Subject: | 75149 need sticker counter parts added | | Viewed: | 47 times | | Topic: | Catalog | | Status: | Open | |
|
| Looked up set 75149 Star Wars and there are no counter parts for the stickers.
How can these be added? I have all of them.
|
|
| Author: | randyf | | Posted: | Apr 29, 2020 13:45 | | Subject: | Re: Item Type Discussion - Update 2 | | Viewed: | 34 times | | Topic: | Catalog | |
|
| In Catalog, infinibrix writes:
| | However if the six main catalog entries is all you currently have to work with
and it’s kind of a quick fix then I understand why you feel the need to continue
with your current plan of changes but correct me if I’m wrong but I get the impression
that you do not envisage there ever being much need to extend beyond the six
catelog entries which seems a bit short sighted when you have so many very different
items bundled together like this?
|
This is essentially the crux of the matter. To go beyond the six main item types
would take significant reprogramming of the site, and that is just not going
to happen. So it isn't that we in the catalog don't want to provide better
solutions, it is that we in the catalog can only provide solutions that don't
require significant reprogramming and fit in the context of what we have. In
this sense, the "Minifigs" item type cannot be expanded upon to create more item
types and must be looked at as it stands. And as it stands, "Minifigs" does not
accurately describe what is cataloged under that type, nor has it for a long
time. The easiest solution is to rename it "Figures" to accurately describe what
is cataloged under that type and then come up with guidelines for what can be
a figure. I hope that explains things a bit better from where we are coming from.
Cheers,
Randy
|
|
| Author: | SylvainLS | | Posted: | Apr 29, 2020 10:32 | | Subject: | Re: 3626cpb2463 Fright knight head | | Viewed: | 26 times | | Topic: | Catalog | |
|
| In Catalog, starbeanie writes:
| | Whoever submitted it obvious thought the ghostly wisps around the eyes were eyelashes.
|
Or because it looks like their mother in law?
(Yes, I’m ashamed to encourage that non-PC stereotype.)
|
|
| Author: | starbeanie | | Posted: | Apr 29, 2020 09:58 | | Subject: | Re: 3626cpb2463 Fright knight head | | Viewed: | 21 times | | Topic: | Catalog | |
|
| Whoever submitted it obvious thought the ghostly wisps around the eyes were eyelashes.
In Catalog, yorbrick writes:
| | In Catalog, starbeanie writes:
| | Torso looks male.
In Catalog, yorbrick writes:
| |
* | | 3626cpb2463 Minifigure, Head Alien Female Bright Light Blue Long Eyelashes and Cheek Lines, White Eyes, Blue Open Mouth Smile with Teeth Parted and Fangs Pattern - Hollow Stud
Parts: Minifigure, Head |
I notice the head of the Fright Knight from CMF S19 is listed as female. Has
LEGO ever confirmed that this character is meant to be female? I couldn't
find the online bios like they used to do.
|
|
Yes the torso is a "male" or at least gender neutral one without the typical
curves given to female adult torsos. I just found it strange that the head was
listed as female, given most / all people on youtube and other reviews talk of
him / he / his when referring to the Fright Knight.
|
|
|
| Author: | yorbrick | | Posted: | Apr 29, 2020 09:07 | | Subject: | Re: 3626cpb2463 Fright knight head | | Viewed: | 23 times | | Topic: | Catalog | |
|
| In Catalog, starbeanie writes:
| | Torso looks male.
In Catalog, yorbrick writes:
| |
* | | 3626cpb2463 Minifigure, Head Alien Female Bright Light Blue Long Eyelashes and Cheek Lines, White Eyes, Blue Open Mouth Smile with Teeth Parted and Fangs Pattern - Hollow Stud
Parts: Minifigure, Head |
I notice the head of the Fright Knight from CMF S19 is listed as female. Has
LEGO ever confirmed that this character is meant to be female? I couldn't
find the online bios like they used to do.
|
|
Yes the torso is a "male" or at least gender neutral one without the typical
curves given to female adult torsos. I just found it strange that the head was
listed as female, given most / all people on youtube and other reviews talk of
him / he / his when referring to the Fright Knight.
|
|
| Author: | starbeanie | | Posted: | Apr 29, 2020 09:05 | | Subject: | Re: 3626cpb2463 Fright knight head | | Viewed: | 20 times | | Topic: | Catalog | |
|
| Torso looks male.
In Catalog, yorbrick writes:
| |
* | | 3626cpb2463 Minifigure, Head Alien Female Bright Light Blue Long Eyelashes and Cheek Lines, White Eyes, Blue Open Mouth Smile with Teeth Parted and Fangs Pattern - Hollow Stud
Parts: Minifigure, Head |
I notice the head of the Fright Knight from CMF S19 is listed as female. Has
LEGO ever confirmed that this character is meant to be female? I couldn't
find the online bios like they used to do.
|
|
|
| Author: | yorbrick | | Posted: | Apr 29, 2020 09:00 | | Subject: | 3626cpb2463 Fright knight head | | Viewed: | 57 times | | Topic: | Catalog | | Status: | Open | |
|
|
* | | 3626cpb2463 Minifigure, Head Alien Female Bright Light Blue Long Eyelashes and Cheek Lines, White Eyes, Blue Open Mouth Smile with Teeth Parted and Fangs Pattern - Hollow Stud
Parts: Minifigure, Head |
I notice the head of the Fright Knight from CMF S19 is listed as female. Has
LEGO ever confirmed that this character is meant to be female? I couldn't
find the online bios like they used to do.
|
|
| Author: | bje | | Posted: | Apr 29, 2020 07:57 | | Subject: | Re: Category Definitions Discussion - Parts I - M | | Viewed: | 37 times | | Topic: | Catalog | |
|
| There is no clear definition of the body of a minifigure, minidoll or microdoll.
The convention is that a body refers to the form without the head, thus including
the neck, trunk, hips, legs, arms and hands. Body parts are then every part of
the body excluding the head. The catalogue is also very specific about is included
in the assembly of a minifigure or minidoll, so accessories defined as body wear
are only those fitting around the neck or hips or on the feet. The torso assemblies
and legs assemblies keep to the conventions above. Please also consider how the
definitions of micro doll, mini doll and minifigures tie in with the overall
category definition of figures. I've removed references to figures for these
to avoid a weird definition such as “ the individual neck, trunk, hips, legs,
arms and hands of figures that are not mini dolls and micro dolls, scale model
figures, figure assemblies or any other figures other than what can be construed
as the standard trademarked minifigure”.
Definitions – Section J parts
Jumbo Bricks - For sets and related items for the 3+ age range that are
three times the size of standard LEGO bricks and not compatible with any other
standard bricks.
Definitions – Section L parts
Ladder & Bridge - For complete items, functioning as equipment, and their
accessories, that enable travel between two different elevations or across gaps.
Note 1
Large Figure Part - For component parts of buildable figures. Note
2
Lever - For throttles and their parts that moves around a fixed point
and are used to control machinery. Note 3
Definitions – Section M parts
Magnet - For items that contain a metal part able to attract other metal
parts to itself and accessories for those items. Note 4
Micro Doll, Body Part - For the bodies and the individual neck, trunk,
hips, legs, arms and hands of micro dolls. Note 5
Mini Doll, Body Part - For the individual neck, trunk, hips, legs, arms
and hands of mini dolls.
Mini Doll, Body Wear - For items that fit around the neck, legs assemblies
or on the feet of mini dolls. Most or all also fit minifigures and mini dolls.
Note 6
Mini Doll, Hair - For hair and hair/headgear combinations that are primarily
used on mini dolls. Most or all also fit minifigures and micro dolls.
Mini Doll, Head - For heads fitting on mini doll torso assemblies and
micro doll body parts.
Mini Doll, Headgear - For any type of covering for the head and head cover
accessories that are used primarily on mini doll heads. Most or all also fit
minifigure and micro doll heads.
Mini Doll, Legs Assembly - For complete hips and legs assemblies of mini
dolls.
Mini Doll, Torso Assembly - For complete neck, trunk, arms and hands assemblies
of mini dolls.
Minifigure, Body Part - For the individual neck, trunk, hips, legs, arms
and hands of minifigures. Note 7
Minifigure, Body Wear - For items that fit around the neck, hips or on
the feet of minifigures. Most or all also fit mini dolls and micro dolls. Note
8
Minifigure, Hair - For hair and hair/headgear combinations that that are
primarily used on minifigures. Most or all also fit mini dolls and micro doll
heads.
Minifigure, Head - For heads fitting on minifigure torso assemblies with
no modifications to the head.
Minifigure, Head, Modified – For heads fitting on minifigure torso assemblies
with modifications.
Minifigure, Headgear - For or any type of covering for the head and head
cover accessories that are used primarily on minifigures. Most or all also fit
mini dolls and micro doll heads.
Minifigure, Headgear Accessory - For removable accessories that attach
to minifigure, hair or – headgear. Note 9
Minifigure, Legs Assembly - For complete hips and legs assemblies of minifigures.
Minifigure, Shield - For defensive items, typically carried, that are
primarily used by minifigures. Most or all also can also be used by mini dolls.
Note 10
Minifigure, Torso - For the complete neck and trunk assemblies of minifigures.
Minifigure, Torso Assembly - For complete torso, arms and hands assemblies
of minifigures.
Minifigure, Utensil - For items that are carried and not body wear, are
intended primarily for minifigure use, and are not weapons. Most or all also
can also be used by mini dolls. Note 11
Minifigure, Weapon - For items carried and used in fighting intended primarily
for minifigure use. Most or all also can also be used by mini dolls. Note
12
Modulex, Brick - For bricks and modified bricks in the Modulex building
system, generally not compatible with any other standard bricks. Note 13
Modulex, Window - For windows an decorated windows used in the Modulex
building system.
Monorail - For track, train parts, and 9V electric, train items specific
to a single rail train system.Note 14
Motor, Non-Electric - For clockwork and flywheel motors and their accessories.
Note 15
Notes:
1. So to include the pivot and holder so these do not have to move to hinges
or modified plates/tiles. Also complete added so that part assemblies of bridges
etc are excluded and equipment added so certain bars and modified plates need
not be moved.
2. If these are all used for that category of sets, should they not be under
that definition? Also, consider renaming this entire category including the buildable
figures to “scale model figures” as that is a more accurate description of what
these are, consider adding the scale as well. All scale model figures are posed
in one way or the other. https://thedesignersassistant.files.wordpress.com/2012/11/scale-figure-comparison.png
3. Technically these are throttle levers, parts included to avoid moving those
to bars and cones also to differentiate from joints;
4. There are some parts presently under modified bricks that contain magnets
eg 388c*, are these going to be moved? Else this must rather be vehicle specific
or move to vehicles and trains.
5. See the general note at the start and also other individual definitions to
do with minifigures and mini dolls.
6. I've checked some of these parts and they do fit minifigures as well.
I've added micro dolls if the part can fit on the neck or head of those.
7. I've reverted to minifigure here for the time being, so that the cross
reference in all of the parts above in the mini doll and micro doll categories
is retained. If figures are to be the definitions, then change everything on
top of this section as well. Also, if we use figures then the hat for the piggy
bank under animal accessories should for instance move to to minifigure headgear.
So unless the title changes to figure, body part the minifigure is the thing
that defines what these parts are.
8. This to complement the same conventions as used for mini dolls and micro dolls.
All of what follows use the same conventions.
9. With respect, if it attached directly to the head, it would be headgear. The
accessory part should conceivably be only to accessorise the headgear, not the
head itself. If any of these also fit directly fit mini doll hair or mini doll
headgear then the modifier: “Most or all also fit mini doll hair and headgear”
should be added.
10. I introduce carry here as a modifier to differentiate utensils as well. I
am not sure if these can be fitted to micro dolls, if so, then include those
as well.
11. Utensils then are all items that are not weapons and not body wear. Again,
I am not sure about micro dolls.
12. Excluded war from the definition as by definition no LEGO part can depict
warfare. A weapon thus excludes utensils and body wear. Again, I am not sure
about micro dolls.
13. Bricks are defined. I'm still not there yet with parts that do not have
studs on top, but for the time being these are modified as well. The not compatible
part is added to be the same as for jumbo bricks. This is essentially the convention
I used for Duplo, again to prevent specific categories from getting in-category
definitions not compatible with the rest of the catalogue definitions.
14. Monorail is specific type of train system. Consider rather moving the motors
to Electric, Train so as to avoid having a cluttered definition. Otherwise, amend
the definition of Electric, Train to specifically exclude monorail items.
15. All of these motors are using the clockwork or friction motor design. These
motors are specific to toys. Non-electric can include pneumatic as well.
|
|
| Author: | infinibrix | | Posted: | Apr 29, 2020 05:55 | | Subject: | Re: Item Type Discussion - Update 2 | | Viewed: | 44 times | | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| |
infinibrix: I think breaking down some of this stuff might make more sense
than renaming Minifigs to Figures and then piling everything into the same place.
Response: You and I have spoken about this in another thread. I really
don't understand the logic behind adding additional item types. In a way
it would be like having a Town Sets, Space Sets, Castle Sets, etc. system of
item types instead of categorizing all these as sets and sorting them within
that item type. Figures are figures and can be further sorted within the Figures
item type.
|
Your interpretation of what I’ve suggested is non-comparable as it makes it sound
like I’m trying to separate apples and oranges from fruit when I’m talking about
separating Fruit from other food types?
Of course if goes without saying that all sets regardless of theme should be
catalogued under ‘Sets’ however on the subject of this I still think having polybags
under sets isn’t ideal. Do people browsing for sets looking for a gift for someone
really want to be confronted with lots of polybags especially when some only
contain a minifigure? On the other hand someone looking for a suitably sealed
stocking filler may appreciate a separate place to search for that type of product
without having to be confronted with lots of substantial sets?
With regards to the link you provided:-
https://www.bricklink.com/catalogStats.asp?statID=M&inItemType=P&itemType=M
I would suggest that apart from Dr. Octopus (which is a minifiure) the rest are
all buildable figures/characters and should ideally be separated and categorised
as such as they are certainly not the type of things I would expect to see when
browsing for minifigs
However if the six main catalog entries is all you currently have to work with
and it’s kind of a quick fix then I understand why you feel the need to continue
with your current plan of changes but correct me if I’m wrong but I get the impression
that you do not envisage there ever being much need to extend beyond the six
catelog entries which seems a bit short sighted when you have so many very different
items bundled together like this?
I think the end goal needs to be a catalog that makes sense to your average shopper
and the more categories you have with clear definitions the simpler and faster
it will be for people to browse and shop!
Some of the defintions that are currenly being thrown around with regards to
what makes a figure a figure only goes to show that they cannot easily be defined
into one category and rather than trying to define by complicated factors like
animal interlect, humanoid form or how we know them as a character in the longer
term it would seem logical to define by the type of build they are be that single
piece figure, brick built character, minfig style character with torso assembly
etc..
|
|
| Author: | Stellar | | Posted: | Apr 29, 2020 05:06 | | Subject: | Re: Item Type Discussion - Update 2 | | Viewed: | 33 times | | Topic: | Catalog | |
|
| In Catalog, Turez writes:
| | First, thanks for your detailed answer!
In Catalog, StormChaser writes:
| | The LEGO group has made many different kinds of figures (40+) and only one of
them is a minifigure. We lump them all together and call them all minifigures.
This is incorrect.
|
Okay, it is incorrect if you use the term "minifigure" in its official, "narrow"
meaning. But one could also argue that BrickLink and also other sites like Brickset
have established another meaning for its own catalog during the past 20 years
and therefore it also stands for all kinds of figures like mini dolls, scala
dolls etc., as the old definition explains (mini figures = various types of small
figures). To illustrate that:
Categroy: Minifigs (1st meaning: Different types of small figures)
- Standard Minifigures (2nd meaning: "original" minifigures)
- Mini Dolls
- Droids
- Scala Dolls
- Microfigures
- Bionicle Figures
- ...
It is the same with some other categories: "Books" also stands for magazines
or Legoland park maps, "Sets" includes service packs and bulk packs, "Catalogs"
includes single pieces of paper.
So the question is: Are people confused by the two meanings? I don't know.
(But I would agree that people would still find minifigs in a retitled category.
So maybe it's just my personal traditional feeling why I would like to
keep "Minifigs" as one of the six main categories.)
|
I was gone say something like this, great explanation of my thoughts!
|
|
| Author: | bje | | Posted: | Apr 29, 2020 04:07 | | Subject: | Re: Item Type Discussion - Update 3 | | Viewed: | 54 times | | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| | In Catalog, StormChaser writes:
| | We're considering the possibility of updating the page defining item types
on June 1st when we add the new category definitions.
|
There were two things that were contentious: how to classify figures and the
distinction between sets and gear. The sets/gear distinctions isn't figured
out yet, but there is progress on figures. Share what you think:
https://www.bricklink.com/help.asp?helpID=2487
|
Thank you to both you and Jonas.
Two immediate issues if I may:
Sentient refers to the quality of having feelings. Rather use animate to distinguish
between characters and objects.
Your definition of a pet is circular: If the pet is named, it is an animal, but
not a figure. If an animal is named it is a figure. Hence, by the mere virtue
of being described as Polly the pet parrot, it becomes a part,
but being described as Polly the parrot, it becomes a figure.
Other matters specifically dealing with Figures:
You should also decide what is the primary criteria. I've made a combination
flowchart/decision tree as in the image. The full detailed image is here:
http://jebricks.co.za/Images_Public/Diagram1.png
Note please, for the sake of brevity, Graphic is your definition of "Representations
of Humans", Figure Function is "Primary Function", Animal includes both your
"Animal" and "Pets" definitions and "Figure Size" is a non-issue.
If you decide to use this on the help page, it is available for use but I would
need the help of a graphics person to jazz it up a bit. I tend not to worry about
nice looks when it comes to functionality.
That makes having character, that is named, as the primary starting point after
excluding sets. Then move on to animate (your current sentient) and then completeness.
See if that accurately describes the process of deciding what is a figure and
what is a set/part/gear. From there, you might be ale to remove certain definitions
and exceptions such as pets and figure size from the definition table and simplify
it.
I remember a discussion in times past as to whether or not the dramatis personae
in sets and what makes them compete as to what the defining standard of what
a minifigure is. I'm not sure if you want to address the issue of accessories
or completeness with these definitions as well. I know some people who think
a cellphone is required to make them complete humans, so where accessories are
construed as required for limb movement or character. In this case refer to
in which the figure has a dual weapon/body movement part. It would be less confusing
if the accessories required for movement are included somewhere. If users feel
that should be separate issue, then note it on the definitions page please.
Also, I do not know if BL's help pages can be sorted such that the definitions
flow a bit better. Part of what is confusing is the fact that you move from animal
to character to limbs missing to determine if something is a figure or not, whereas
the more natural progression would be character, limbs missing, animal. I think
this is a process of definition rather than a single definiton so as to make
for simpler line definitions and a flow in the progress from definition to definition
might help to avoid confusion.
Finally, are you very sure BL can handle single part figures as being under figures
with a part number and part description? Can you please make an example of how
such an item would be named as a figure?
|
|
|
| Author: | StormChaser | | Posted: | Apr 28, 2020 23:04 | | Subject: | Re: Item Type Discussion - Update 3 | | Viewed: | 53 times | | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| | We're considering the possibility of updating the page defining item types
on June 1st when we add the new category definitions.
|
There were two things that were contentious: how to classify figures and the
distinction between sets and gear. The sets/gear distinctions isn't figured
out yet, but there is progress on figures. Share what you think:
https://www.bricklink.com/help.asp?helpID=2487
|
|
| Author: | StormChaser | | Posted: | Apr 28, 2020 19:33 | | Subject: | Re: Item Type Discussion - Update 2 | | Viewed: | 39 times | | Topic: | Catalog | |
|
| In Catalog, Turez writes:
| | Okay, it is incorrect if you use the term "minifigure" in its official, "narrow"
meaning.
|
Without going too crazily in-depth about this, the word "minifigure" actually
means something very specific and a minifigure is actually a three-dimensional
trademark:
https://www.trademarkandcopyrightlawblog.com/2015/07/lego-mark-wars-toy-giant-snaps-together-two-favorable-3d-trademark-rulings-in-europe/
| | But one could also argue that BrickLink and also other sites like Brickset
have established another meaning
|
Yes, one could argue that - and lose. It's like saying that if I refer to
my vehicle tires by an entirely different name for long enough that eventually
I will be correct in what I'm saying. I won't be. I'll still be
wrong.
But I think we've probably exhausted that topic at this point.
| | Figures: A single part or small part assembly that fits into the Lego
building system and represents a human being, an alien, a droid, a
robot or any other real or fictive character excluding animals. Figures have
at least two distinguishable moulded body parts, at least one of which is a head,
torso, arm, hand, leg or feet.
|
Strangely enough, that's pretty close to what we all came up with the last
time we talked about this! But some thoughts:
| | Figures: A single part or small part assembly
|
Here I would ask how we decide what "small" means. See this list:
https://www.bricklink.com/catalogStats.asp?statID=M&inItemType=P&itemType=M
| | that fits into the Lego building system
|
Which one? Technic, Duplo, Quatro, Belville, Scala? I would change "the" to
"a."
| | and represents a human being, an alien, a droid, a robot or any other real or fictive character excluding animals.
|
So no animals at all? Then how do we define these?
|
|
| Author: | Turez | | Posted: | Apr 28, 2020 17:21 | | Subject: | Re: Item Type Discussion - Update 2 | | Viewed: | 43 times | | Topic: | Catalog | |
|
| First, thanks for your detailed answer!
In Catalog, StormChaser writes:
| | The LEGO group has made many different kinds of figures (40+) and only one of
them is a minifigure. We lump them all together and call them all minifigures.
This is incorrect.
|
Okay, it is incorrect if you use the term "minifigure" in its official, "narrow"
meaning. But one could also argue that BrickLink and also other sites like Brickset
have established another meaning for its own catalog during the past 20 years
and therefore it also stands for all kinds of figures like mini dolls, scala
dolls etc., as the old definition explains (mini figures = various types of small
figures). To illustrate that:
Categroy: Minifigs (1st meaning: Different types of small figures)
- Standard Minifigures (2nd meaning: "original" minifigures)
- Mini Dolls
- Droids
- Scala Dolls
- Microfigures
- Bionicle Figures
- ...
It is the same with some other categories: "Books" also stands for magazines
or Legoland park maps, "Sets" includes service packs and bulk packs, "Catalogs"
includes single pieces of paper.
So the question is: Are people confused by the two meanings? I don't know.
(But I would agree that people would still find minifigs in a retitled category.
So maybe it's just my personal traditional feeling why I would like to
keep "Minifigs" as one of the six main categories.)
By the way, LEGO calls this a minifigure:
"Includes Aaron and Robot Hoodlum minifigures"
| | | | I think the current classification works quite well, even if it is not consistent in
some cases and has no clear definition yet.
|
Then help us write a definition. That's the point of publicly discussing
this: to see what the community thinks and get input on future direction. After
looking at the list above of what we currently consider "Minifigs," write a definition
of that item type and share it.
|
Since I am not a native english speaker, I might not be the right person to to
this. But anyway, here is a draft:
Figures: A single part or small (1) part assembly that fits into the Lego
building system (2) and represents a human being, an alien, a droid, a
robot or any other real or fictive character excluding animals. Figures have
at least two distinguishable moulded body parts, at least one of which is a head,
torso, arm, hand, leg or feet (3).
(1) "Small" because whole sets like the buildable figures should be excluded.
(2) So figures like
and others you have listed are excluded.
(3) The second sentence makes sure that everything from
https://www.bricklink.com/help.asp?helpID=2489
is included exept the "Infant Figure" and the "Duplo Vehicle Character Figure"
which are more parts than figures for me.
Parts like
[p=3062bpb036]
or
[p=3062bpb038]
would be excluded.
Too long, I guess?
|
|
| Author: | wahiggin | | Posted: | Apr 28, 2020 14:38 | | Subject: | Re: City Beautification Project | | Viewed: | 26 times | | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| | Thanks to new functionality from BrickLink we've added hundreds of large,
high-quality additional images for City sets during the past three weeks. These
images are now available for most City sets from 2010-2020.
The actual set images weren't updated, unfortunately, but the additional
images are amazing. I've included representative samples from each year
below. The additional images can be viewed by clicking on any set image, but
the set entry must be visited to zoom in and appreciate the true image quality.
Enjoy!
|
Very nice
|
|
| Author: | popsicle | | Posted: | Apr 28, 2020 13:19 | | Subject: | Re: City Beautification Project | | Viewed: | 46 times | | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| | Thanks to new functionality from BrickLink we've added hundreds of large,
high-quality additional images for City sets during the past three weeks.
|
Great wordplay!
|
|
| Author: | StormChaser | | Posted: | Apr 28, 2020 13:02 | | Subject: | City Beautification Project | | Viewed: | 132 times | | Topic: | Catalog | | Status: | Open | |
|
| Thanks to new functionality from BrickLink we've added hundreds of large,
high-quality additional images for City sets during the past three weeks. These
images are now available for most City sets from 2010-2020.
The actual set images weren't updated, unfortunately, but the additional
images are amazing. I've included representative samples from each year
below. The additional images can be viewed by clicking on any set image, but
the set entry must be visited to zoom in and appreciate the true image quality.
Enjoy!
|
|
| Author: | StormChaser | | Posted: | Apr 28, 2020 11:50 | | Subject: | Re: Item Type Discussion - Update 2 | | Viewed: | 49 times | | Topic: | Catalog | |
|
| In Catalog, Turez writes:
| | It took me some time to fully understand your idea. But I think I get it now.
1. You want to rename the current category "Minifigs" to "Figures". Why?
|
Go to this page and scroll down to the section titled "Different Types of Figures"
please:
https://www.bricklink.com/help.asp?helpID=2489
The LEGO group has made many different kinds of figures (40+) and only one of
them is a minifigure. We lump them all together and call them all minifigures.
This is incorrect.
| | "Figure", in contrast, is random and meaningless. Every brand can have figures,
but LEGO has minifigures.
|
I understand what you're saying, but the item type name is inaccurate. Scala
dolls are not at all minifigures. I don't think we need or will get another
item type for figures that are not minifigures.
And people looking for minifigures should be able to comprehend where to find
them even if the item type name is changed to Figures.
| | Removing the name/category "Minifigs" from one of the largest LEGO websites seems
really strange to me.
|
The category would not be removed. I'm only suggesting that it be retitled
for accuracy. There are hundreds if not thousands of figures in that item type
that are emphatically not minifigures. And "minifigs" is a slang term, by the
way, that was largely removed from the catalog already.
| | 2. You want to put all animals into the renamed "Figures" category. For example,
the inventory of
would then have "2035 Parts, 12 Figures"? Very odd...
|
I suggested it, yes. But it might not be a good idea. I haven't looked
into it fully. In the case of this set, it seems like it wouldn't be a good
idea.
| | And
would have "5 Parts, 2 Figures"?
|
No, this set inventory correctly lists the animal figure as a counterpart and
someday we'll list the human figure the same way. So this set would have
something like 17 parts and two figures as counterparts (it's already halfway
there).
| | So that would also mean that we go away from the idea that set inventories should
display the parts like they come in a new set? Because when the built dragon
is a figure, its single parts need to be removed from the inventory.
|
Not when it's listed as a counterpart. That's where we've been wanting
to go for some time now.
| | If you ask me, the reason why there is a category called "Minifigs" is because people are especially interested in minifigs
|
I don't deny that minifigures sell and collect well. I think at the roundtable
I attended some years back the site said that figures made up a decent percentage
of sales. But if we have a separate category for minifigures because of the
high interest, then what justification exists for sets, parts, books, catalogs,
and gear?
I would say the reason we have these six item types is simply because they're
a way to categorize things, not because the mere existence of any one item type
indicates that it somehow rises above any other item type in importance.
| | Therefore, people (buyers, sellers, kids, collectors) want to know how many minifigs are in a set. They usually don't need to know how many spiders, frogs, parrots etc. are in a
set and I'm sure nobody would understand why all this should be mixed up
in the same category now.
|
The second half is a fair point. We certainly don't have to categorize animals
as figures. The first half is also a fair point and might need to be considered
when talking about moving figures to counterparts.
| | I think the current classification works quite well, even if it is not consistent in
some cases and has no clear definition yet.
|
Then help us write a definition. That's the point of publicly discussing
this: to see what the community thinks and get input on future direction. After
looking at the list above of what we currently consider "Minifigs," write a definition
of that item type and share it.
| | (yes, minifig collectors, not figure collectors)
|
I'm sure there are people who collect different types of figures, not just
minifigures. BTW, here are some additional types of figures that we don't
even consider figures:
Should all of them be considered figures? No. But some should.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
USA, Tennessee
Netherlands, Overijssel
Poland, w. Pomorskie
Lithuania, Panevėžys
United Kingdom, England
)
)
)
South Africa, Western Cape
France, Nouvelle-Aquitaine
Canada, Ontario
Spain, Comunidad Valenciana
Australia, New South Wales
Norway, Hordaland
Denmark
)
)
)
Germany, Niedersachsen
