Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | Autour | Posted: | Apr 11, 2020 06:53 | Subject: | 3830c01 Hinge Brick 1 x 4 marked for deletion | Viewed: | 505 times | Topic: | Catalog | Status: | Open | |
|
| Hi,
The reason why 3830c01 Hinge Brick 1 x 4 Swivel is marked for deletion is not
justified IMHO ("it sets a precedent for adding dozens of unnecessary combinations
of hinges").
I don't think anyone has the intention to create colour-combinations for
these two parts combined.
Most sellers just want to sell the two parts together to avoid unequal (worthless)
quantities of the underlying parts.
So can this decision be undone please so that new items can be listed?
Best regards,
Kris - Autour des Briques
|
|
Author: | Stuart9 | Posted: | Apr 9, 2020 12:15 | Subject: | Another shade /colour variation | Viewed: | 76 times | Topic: | Catalog | Status: | Open | |
|
| Part 15107 in two shades of trans blue, only trans light blue known in sets but
trans medium blue listed for sale.
Thought I'd just confirm there are variations/different trans blues.
Info only.
|
|
Author: | AnthonyH | Posted: | Apr 8, 2020 06:40 | Subject: | 20mm high figures | Viewed: | 135 times | Topic: | Catalog | Status: | Open | |
|
| Do you list Lego 20mm high figures?
(They are marked "Lego" inside the stud hole at the top)
|
Author: | cosmicray | Posted: | Apr 7, 2020 09:11 | Subject: | Game set boxes | Viewed: | 77 times | Topic: | Catalog | Status: | Open | |
|
| This is a secondary concern, also having to do with Games being listed under
Gear.
In the case of G3853, there are a number of sellers trying to sell the empty
box. But Gear does not allow for listing Original Boxes, only Instructions. Therefore,
they are listing them under the primary set listing.
Can anything be done about this shortcoming in Gear ? I know that in Sets, it
is variable if a Set has Instructions or not. The same may apply within Gear
for Boxes.
Nita Rae
|
|
Author: | Autour | Posted: | Apr 6, 2020 13:50 | Subject: | 3024 plate 1x1 metallic gold : does it exist? | Viewed: | 131 times | Topic: | Catalog | Status: | Open | |
|
| Does 3024 plate 1x1 exist in Metallic Gold?
I do have some examples in front of me (genuine parts) that don't look at
all as Pearl Gold but do look as Metallic Gold. But the latter is not featured
as a known colour.
Can someone else confirm the existence of 3024 in Metallic Gold?
And if so, please add it to the catlogue as a known colour!
|
|
|
Author: | normann1974 | Posted: | Apr 5, 2020 18:59 | Subject: | Which stickered parts use variants? | Viewed: | 59 times | Topic: | Catalog | Status: | Open | |
|
| Working on inventory for set I was about to create the stickered counterpart
for the blue 1x2x1 panel with rounded corners, but I noticed that all stickered
counterparts for 1x2x1 panels are created as "4865pbXXX", ignoring which variant
of the panel it is. I guess sellers must specify it manually. On the other hand,
for the stickered 1x2x2 bricks, both variants of the brick exists as
and
* | | 3245bpb21 Brick 1 x 2 x 2 with Inside Axle Holder with Box and Arrows and Globe on Red Background Pattern (Sticker) - Set 7939 Parts: Brick, Decorated | . Why this difference?
/Jan
|
|
Author: | ForTheGirls | Posted: | Apr 5, 2020 10:41 | Subject: | scd001 and scd003 | Viewed: | 77 times | Topic: | Catalog | Status: | Open | |
|
| There is an error in the catalog regarding the heads for referenced minifigs.
The catalog says both scd001 and scd003 have the same heads, however they are
different if you look at their faces in the catalog. Also, if you look up the
head numbers on both, it says that 2 minifigs have the same head: scd001 and
scd003, but they don't.
In actuality, scd001 has head number 3626cpd1379; scd003 has 3626cpd1375. When
you try to look up 3626cpd1375, the catalog references head 3626cbpb1379. You
cannot buy 3626cpb1375 on the market, it automatically looks up 3626cbp1379.
This is the first time I've found an error in the catalog. I want to buy
3626cpb1375. Will I be notified when the catalog is fixed?
Thank you,
Ms. Dale Kurtz
For The Girls
|
|
Author: | grimsbricksuk | Posted: | Apr 5, 2020 04:05 | Subject: | Image added for SW Maul sw1091 | Viewed: | 77 times | Topic: | Catalog | Status: | Open | |
|
| I have added an image for star wars minifig sw1091 (Maul), please approve when
ready.
Thanks.
|
Author: | krazy_yvan | Posted: | Apr 4, 2020 15:56 | Subject: | Part 6553 | Viewed: | 90 times | Topic: | Catalog | Status: | Open | |
|
| Hello,
is this possible to ask for a description enhancement? The part 6553 for example
is just impossible to find without Jedi powers, it does not even have axle in
the name...
Is there a procedure for this kind of demand?
Thanks
|
Author: | nicmare | Posted: | Apr 3, 2020 09:27 | Subject: | packaging dimensions for 81000-1 | Viewed: | 52 times | Topic: | Catalog | Status: | Open | |
|
| the current dimensions are wrong:
262 x 188 x 44 cm
correct:
260x188x45 mm
|
Author: | BrickenbergNC | Posted: | Apr 3, 2020 02:04 | Subject: | Possible New Item Number? | Viewed: | 118 times | Topic: | Catalog | Status: | Open | |
|
| Not 100% sure how to submit this, but there may be a new item number for part
60471: Hinge Plate 1 x 2 Locking with 2 Fingers on Side. See the attached picture
from Lego.com.
|
|
Author: | leopard37 | Posted: | Mar 31, 2020 18:24 | Subject: | Santa Porg | Viewed: | 93 times | Topic: | Catalog | Status: | Open | |
|
| Is there a reason that this poor little fellow:
doesn't have his hat? I can add if no good reason.
Thanks,
Tyson.
|
|
|
Author: | runner.caller | Posted: | Mar 31, 2020 10:46 | Subject: | Is there a plan to resurrect special assemlie | Viewed: | 105 times | Topic: | Catalog | Status: | Open | |
|
| Any plan to resurrect special assemblies?
I came across a mostly complete
I didn't want to break the hulkbuster down so I decided I'd list him
on another site and oh boy...
Apparently said site has a new policy where buyers can request a cancellation
in the first hour.
Didn't see that message request and printed a label while I was in paypal
printing 10 other labels for bricklink.
Apparently, the action of printing a label automatically denies a buyer's
cancellation request.
Which is silly as I had no problem refunding since I hadn't shipped.
The other site would not let me cancel and refund through them. I got in contact
with CS and they said I had to refund through the paypal transaction since "I
denied the original request".
Then if I gave CS the paypal transaction, they would give me credit for the fees,
but I'm not holding my breath. I'm guessing they'll credit back the
final value fee, but I'm definitely out on the papal fees and the jury's
out on the sales tax.
Funny how THEY charge the buyer sales tax, and then when YOU give a full refund,
the sales tax portion gets refunded out of YOUR balance!?
Another funny thing is that paypal adds the sales tax that ebay collects to the
total and charges you 2.9% on that total. So you're paying a percent fee
on a percent tax collected by another entity..
I personally don't feel there should be sales tax on used items.
These days, that other site is about only good for buying and sorting out high
quality pcs to relist on this site.
So if special assemblies are a hassle with inventories, can we list partial components
of sets as "custom items"?
|
|
|
Author: | Davemerz | Posted: | Mar 30, 2020 13:52 | Subject: | Help Id this torso | Viewed: | 98 times | Topic: | Catalog | Status: | Open | |
|
| White torso with black pattern, white arms and hands |
|
Author: | Demiurge | Posted: | Mar 29, 2020 05:07 | Subject: | How to approve my change? | Viewed: | 63 times | Topic: | Catalog | Status: | Open | |
|
| Hi! I added a few Large Catalogs a week ago + added Images for this catalogs.
But they still have the status "Pending Approval". What can I do for approving
them?
|
Author: | Leftoverbricks | Posted: | Mar 29, 2020 04:24 | Subject: | where to change weight of GEAR instructions? | Viewed: | 33 times | Topic: | Catalog | Status: | Open | |
|
| ^ |
Author: | MD14 | Posted: | Mar 28, 2020 21:26 | Subject: | Help identify part | Viewed: | 90 times | Topic: | Catalog | Status: | Open | |
|
| I have torso v neck blue overalls with white arms and wide stitch spacing on
overalls as seen in picture of listing cty0340.
However when i go into the parts of that listing the torso has a different tight
stitch spacing and the head post has the black part on it(mine does not have
this black mark either). I have looked and am unable to find any other pictures
or references.
I have 3 of them if that helps.
Wondering if anyone can identify the difference and what set i may have that
they specifically come from.
Thanks
Todd
|
Author: | primadeluxe | Posted: | Mar 28, 2020 05:11 | Subject: | How to add weight and size of instructions? | Viewed: | 46 times | Topic: | Catalog | Status: | Open | |
|
| How can I do this? I can not find it ..... Thanks! |
Author: | mokibricks | Posted: | Mar 26, 2020 03:21 | Subject: | Adding missing items to the catalog | Viewed: | 76 times | Topic: | Catalog | Status: | Open | |
|
| Hi,
I recently bought a holder for trading cards, and it has a list of all the possible
cards (SW Series 2) with their numbers. Does it help if I add all the items to
the catalog? I have a few more where I will also add the images of the cards,
but in many cases, I won't.
Thanks,
Tamas
|
|
Author: | fooleeze | Posted: | Mar 25, 2020 14:47 | Subject: | ToysRUs & Barnes&Noble Build Event Sets | Viewed: | 103 times | Topic: | Catalog | Status: | Open | |
|
| Hello all, I've got several Toys R Us and Barnes & Noble build event sets
(May 4th promo events, etc). I don't see these sets in the Bricklink Catalog.
Is it possible to add those? (Can I submit them?) Or is this an area that
is not added to the catalog typically?
Thanks for your time!
Todd
|
Author: | OliverM22 | Posted: | Mar 24, 2020 18:31 | Subject: | Store | Viewed: | 95 times | Topic: | Catalog | Status: | Open | |
|
| If anyone has a store in the uk and has these parts in it let me know thanks.
I know it’s a very small order
|
|
Author: | Bobflip | Posted: | Mar 22, 2020 22:40 | Subject: | Submitting counterparts without photographs | Viewed: | 75 times | Topic: | Catalog | Status: | Open | |
|
| I've submitted a load of stickered counterparts for set 75877, unfortunately
I'm missing the following four parts so can't take photographs (and needed
to add them to the database to make them easier to find for sale!). The others
have been approved but not sure what to do for these ones?
6636pb214
54200pb095L
54200pb095R
54200pb096R
|
|
Author: | crazylegoman | Posted: | Mar 21, 2020 16:19 | Subject: | Wheel plate stuck on car chassis piece | Viewed: | 105 times | Topic: | Catalog | Status: | Open | |
|
| Does anyone know if
is meant to be able to be removed from
* | | 11650c01 Vehicle, Base 5 x 10 x 2 1/2 with Mudguards and 6 x 2 Recessed Center with 3 Holes with (Same Color) Wheels Holders Attached Parts: Vehicle, Base |
once they are together?
I feel like the axles are going to snap off of the 2X2 plates if I pull any herder
than I already am. Also, I've never seen a post with a tapered part at the
end like the chassis piece has. It seems a bit like those Bionicle brains and
heads.
David
|
|
Author: | Bendix | Posted: | Mar 21, 2020 06:47 | Subject: | How to add to the catalog? WM soccer team | Viewed: | 61 times | Topic: | Catalog | Status: | Open | |
|
| I just came across of a set of 6 Legoland Sierksdorf postcards: 5 are showing
the German WM soccer team of 1974 on a visit a Legoland Sierksdorf (black and
white). The sixth one shows the entrance of Legoland Sierksdorf and on the back
there are autographs of the soccer team.
I only came twice across this set in a lot of years - add to the catalog as a
set or single?
Thanks for any advice
Beryll
|
|
Author: | primadeluxe | Posted: | Mar 21, 2020 06:32 | Subject: | Difference 4170pb01 between set 7740 and 7745 | Viewed: | 60 times | Topic: | Catalog | Status: | Open | |
|
| I think the sticker of part 4170pb01 for set 7745 is a little bit bigger, than
the sticker for set 7740. See image (below=7745; up=7740)
|
|
|
Author: | Leftoverbricks | Posted: | Mar 19, 2020 12:46 | Subject: | Add paper flyers to set inventories | Viewed: | 86 times | Topic: | Catalog | Status: | Open | |
|
| Quite a few of today's sets not only contain instructions (= booklets or
single sheets of paper) but also other paper items. These are included to promote
the product line or to provide information about what you can do with the set.
Currently there's no way to add these to a set inventory which means that
--as a seller-- you cannot sell a set as 'complete' until these
items are part of the catalogue inventory.
Example:
contains an instruction sheet https://www.bricklink.com/v2/catalog/catalogitem.page?I=41906-1#T=S&O={%22ss%22:%22NL%22,%22rpp%22:%2250%22,%22iconly%22:0}
and a leaflet/flyer --whatever you want to call it-- with building ideas
and a product overview.
For the above set I added this paper sheet to the catalogue under number 6317480.
I can't add a link to this item in the form of p=xxxx or whatever because
it's not supported in the macro tags. See https://www.bricklink.com/help.asp?helpID=1147
Also: this item is nowhere linked to the sets in which it appears.
StormChaser approved it with the item number 'm20dots' and description
'2020 Mini Dots (6317480)'. BTW: I don't think this is very helpful.
I think we need a way to add those paper leaflets to the inventory of a set.
There are two ways to do this:
1. make items like this a part of the inventory or
2. extend the current set description [set entry | instructions entry | box
entry] with '| other included items' or whatever you want
to call it.
|
|
Author: | mfav | Posted: | Mar 18, 2020 20:46 | Subject: | Clips Ahoy, Part 2! Attention StormChaser | Viewed: | 136 times | Topic: | Catalog | Status: | Open | |
|
| http://v4ei.com/brickref/clips-k-v.php
Some takeaway observations so far.
Catalog is inconsistent in how it treats variants.
- Sometimes there is one ID number for two different designs.
-- Sometimes these design differences are noted, other times not
- Sometimes there is one ID number plus a letter (1234a, 1234b, etc.) indicating
different designs
- Sometimes there is one ID number plus "alternate numbers" for a single design
-- Sometimes these alternate ID numbers are the same design
-- Sometimes these alternate ID numbers are a different design
I would suggest that 48729 and 48729b are functionally different designs.
I would suggest that 48729b is actually 41005, and 41005 is a later variant of
48729b.
21 unique clip shapes to this point.
Some clip shape differences are obvious and others are subtle. Many probably
can't be distinguished by most people, even upon close examination. Through
the process of photographing these elements, and bringing the actual 6mm size
up to somewhere around 180mm these differences become more apparent.
So the differences are now cataloged and you can deal with them or not as you
see fit.
There's probably another page or two to come, but this is pretty slow going.
|
|
Author: | tpr | Posted: | Mar 18, 2020 11:19 | Subject: | Panel needs checking please | Viewed: | 83 times | Topic: | Catalog | Status: | Open | |
|
| Hi
* | | 4215pb003 Panel 1 x 4 x 3 with Blue, Red and Silver Space Mechanical Pattern on Inside (Sticker) - Set 6949 (Undetermined Type) Parts: Panel, Decorated Marked for Deletion |
I have this item with solid studs, so should be under 4215a
It is currently under 4215 which is undetermined.
Can anyone check the third picture - comes up too small for me, to see the studs
If they are solid, which I think they are, this wants re-assigning to a 4215a
number
Thanks
tpr
|
|
Author: | stutrippant | Posted: | Mar 17, 2020 14:42 | Subject: | White bricks on a white background. | Viewed: | 132 times | Topic: | Catalog | Status: | Open | |
|
| Seriously, what genius thought the best avatar brick in the catalog should be
white when the background is white too. So many hard to figure out bricks. Please
change all white avatar bricks to something more visible.
|
Author: | Leftoverbricks | Posted: | Mar 17, 2020 04:43 | Subject: | Where can I submit product flyers | Viewed: | 65 times | Topic: | Catalog | Status: | Open | |
|
| TLG is distributing general product flyers in sets within the same theme. For
example DOTS and Ninjago Arcade Pods. The flyers are all the same, so not specific
to a particular set.
Can I add those to the catalog? And where: book / gear / catalog / somewhere
else?
|
Author: | Doodlebug | Posted: | Mar 16, 2020 21:02 | Subject: | p12cty01, 02, & 03 | Viewed: | 49 times | Topic: | Catalog | Status: | Open | |
|
| Is there any printing on the reverse side of this 2012 series of posters? Acquired
some, but they have B/W smaller versions on the reverse.
|
Author: | jonwil | Posted: | Mar 15, 2020 19:58 | Subject: | Question about part x168 | Viewed: | 89 times | Topic: | Catalog | Status: | Open | |
|
| Can anyone tell me why is labeled as "underwater" when it has never
appeared in any underwater type sets?
Should it be renamed?
|
|
Author: | axaday | Posted: | Mar 14, 2020 16:03 | Subject: | Silly to Consider This Sprue a Part? | Viewed: | 154 times | Topic: | Catalog | Status: | Open | |
|
| I apologize for the quick lo-res pic, but I think a lot of people are familiar
with this piece. It's the sprue from [p=19807c01]. And it IS just a sprue.
But I was looking it over today before tossing it in the trash and it is a pretty
neat looking piece AND it was obviously designed with some play value, because
it fits on a stud. It has never been used in a set, I believe, but it is easy
for me to imagine it being useful in MOCs. Would it be silly to add it to the
catalog?
|
|
|
Author: | 69transamman | Posted: | Mar 14, 2020 00:18 | Subject: | Parts 89650 & 60153 | Viewed: | 62 times | Topic: | Catalog | Status: | Open | |
|
| The catalog has separate listing for parts 89652 & 60176, the only difference
being the open lower axle holes. For consistency shouldn't parts 89650 &
61053 have separate listings, they differ in the same way from each other.
Howard
|
|
Author: | bouncingbear | Posted: | Mar 11, 2020 22:02 | Subject: | Faulty print box - 10218 Pet Shop. Custom? | Viewed: | 130 times | Topic: | Catalog | Status: | Open | |
|
| Hello
We have 2 sets with faulty print box of Pet Shop (front of box shows 1332 pieces
vs 2032 official) - as relative new to selling appreciate help how best to put
it into the store inventory? Should it be a custom item, or should it be 10218-1
with custom image?
Many thanks in advance
|
|
Author: | mfav | Posted: | Mar 11, 2020 20:52 | Subject: | StormChaser: the tale of two tails | Viewed: | 230 times | Topic: | Catalog | Status: | Open | |
|
| This is sort of akin to Number Six on your roadmap. I think.
Is there a standardization scheme in the works for items like these shown, and
similar items, where the length exceeds the footprint of the attachment plate?
If you're going by the scheme used for 6239, then 2430 ought to be a 1x5.
If you're going by the scheme used for 2430, then 6239 ought to be a 2x3.
I know this is bound to have implications all over the catalog with many modified
bricks and plates and other things, especially when you get into SNOT pieces,
but there's inconsistency within and across categories now.
One would think the overall x-y-z dimensions of the piece would be considered
every time...
I know this is going to require some quiet contemplation followed by noisy debate,
but some semblance of consistency would be really nice to have.
|
|
|
Author: | Turez | Posted: | Mar 10, 2020 13:10 | Subject: | New minifigure head variant 28621 | Viewed: | 139 times | Topic: | Catalog | Status: | Open | |
|
| Hi everyone,
my set came with a new minifigure head type with two holes and new
number 28621. It is already listed at Brickset:
https://brickset.com/parts/design-28621
Looks like the new mold is only used for transparent heads. All three trans-neon
green heads (1x plain, 2x printed) in my set are the new type while all other
heads are 3626c.
How should the new type (and the printed variants) be added to the catalog?
Regards,
Jonas
|
|
|
Author: | StormChaser | Posted: | Mar 9, 2020 18:48 | Subject: | A Brief Task for A Bored Person | Viewed: | 222 times | Topic: | Catalog | Status: | Open | |
|
| There are problems with these:
[P=41168c01]
[P=41168c02]
[P=41168c03]
[P=41168cx2]
Additionally, there are others not in the catalog. There are various problems
with images, part numbers, colors, inventories, titles, etc., etc.
Bored? Dive in and clean it up! Figure out what needs to be done and start
submitting the necessary requests/additions.
I don't have time + interest at this particular moment, but it needs to be
done.
|
|
Author: | baylit | Posted: | Mar 7, 2020 23:30 | Subject: | LEGOLAND Dollars | Viewed: | 162 times | Topic: | Catalog | Status: | Open | |
|
| I can't find them in the Catalog.
Should I create a new Gear entry?
I have 5 $1s that are from the 1999 series
??
|
|
Author: | 69transamman | Posted: | Mar 7, 2020 13:45 | Subject: | 50899a Showing Only 2 Known Colors | Viewed: | 100 times | Topic: | Catalog | Status: | Open | |
|
| I was trying to identify some Marbled Bionicle Rhotuka Spinner and I noticed
that only 2 colors show up in the known colors list. However, if you click the
link for Color Images it shows actual pictures of 13 identified colors. Why aren't
the other 11 colors shown in the known list? I have the Yellow Marbled and Dark
Red Marbled on hand if additional pictures are needed. The ones I have came from
a bulk lot purchased years ago so, I have no way to identify which set they are
from. My intuition tells me they were from either set #8748-1 or set #6620-1.
While I'm on the topic, does anyone know if the Spinners in set 8749-1 were
all of one color (I am referring only to the 4 Marbled Spinners without code)?
A standard mix of colors? or Completely random assortment of color?
Howard
|
|
Author: | rick_holl | Posted: | Mar 7, 2020 12:44 | Subject: | 8 x 8 dish | Viewed: | 125 times | Topic: | Catalog | Status: | Open | |
|
| Hi,
Anyone knows what finish the 8 x 8 DBG dish that is included in 75159 death star
comes into? There seems to be 2 variants of finish on this one (smooth and shiny)
|
Author: | myq | Posted: | Mar 6, 2020 11:50 | Subject: | BrickLink part numbers vs Lego part numbers | Viewed: | 96 times | Topic: | Catalog | Status: | Open | |
|
| So, what is the official policy for pieces with official Lego part numbers that
also have Bricklink numbers?
Such as:
bricklink: 98138pb023
Tile, Round 1 x 1 with Black Number 5 Coin Pattern
Lego: 17968
FLAT TILE 1X1, ROUND "NO.24"
Obviously the Lego description needs some work, but I would prefer to see the
Lego number when it is known. It facilitates checking shop.lego.com for new bricks.
|
|
Author: | Mirko8710 | Posted: | Mar 3, 2020 12:15 | Subject: | Missing sh619 | Viewed: | 132 times | Topic: | Catalog | Status: | Open | |
|
| Hi all!
We are searching for the minifigure in the subject
Please, the next who submit a new SH minifigure use this code because in the
set 76147, that have three minifigures (sh617, sh618 and sh546), there aren't
no more new minifigures and that code had been skipped.
Many thanks!
Mirko
|
Author: | rick_holl | Posted: | Mar 3, 2020 07:23 | Subject: | Color id | Viewed: | 156 times | Topic: | Catalog | Status: | Open | |
|
| Bought this lot under ´dark grey’ but looks like dark bluish grey
Don’t have it yet, just want to be sure i ordered the DBG one
Thoughts?
|
|
Author: | macyenco | Posted: | Mar 3, 2020 06:49 | Subject: | Incorrect weight | Viewed: | 78 times | Topic: | Catalog | Status: | Open | |
|
| Hi there,
Can someone please enter the correct weight of instruction booklet 6624 Delivery
Van. Due to Bricklink catalog the weight of this booklet is 55 grams, but it
should be 3 grams.
Thank you.
|
Author: | otaviomoser | Posted: | Mar 1, 2020 19:37 | Subject: | DELETE ALL ITEM IN MY INVENTORY | Viewed: | 138 times | Topic: | Catalog | Status: | Open | |
|
| Hi,
I would like to DELETE all items in my inventory and later upload them with the
correct quantities.
How should I do it?
Thank you
|
|
Author: | jbricks | Posted: | Feb 29, 2020 07:39 | Subject: | please change 40166 | Viewed: | 53 times | Topic: | Catalog | Status: | Open | |
|
| set 40166 has a new counterpart in the minifig,
the darktan hair is different in about half of the sets i parted,
new partnumber that has to be added is, 25972 instead of 62810
tried changing it in the inventory (no luck since its a minifig entry) so cannot
use the inventory id of the part.
tried the minifig, but that can't have alternate parts,
why does this have to be so hard?
trying to add to the catalog seems to be a 1 time thing for me now, since it's
already taking me 30 minutes to do this, and nothing has happened,
|
|
Author: | StormChaser | Posted: | Feb 28, 2020 03:51 | Subject: | March Project - Sticker Sheet Restructuring | Viewed: | 212 times | Topic: | Catalog | Status: | Open | |
|
| At long last, it is time. By the end of March, my goal is to eliminate duplicate
catalog entries for sticker sheets:
https://www.bricklink.com/catalogRelList.asp?relID=15
You can see that this has been moved from Section 11.1 to 11.2 on the roadmap:
https://www.bricklink.com/help.asp?helpID=2476
I have some ideas, but I'd like to hear yours - especially those of you who've
given this some thought over the past decade or so that some of us have wanted
it.
Sticker sheets are handled quite consistently at the present moment. How can
we retain that consistency while eliminating duplicate entries with the least
amount of disruption?
As a side note, how do you feel about the NA/International duplicate entries?
These are the same sticker sheets, but have different item numbers, differently-sized
paper backing, and in some cases a slightly different finish (matte vs. glossy).
I don't want to get too distracted with this particular side discussion,
but do we need to maintain separate catalog entries for these sheets? Do you
want us to?
Looking forward to hearing some discussion and seeing some ideas other than my
own to get these duplicate entries handled.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|