Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | BrickenbergNC | Posted: | Feb 11, 2020 14:56 | Subject: | Re: Can't find a modified brick (reverse of 2458) | Viewed: | 57 times | Topic: | Catalog | |
|
| In Catalog, stutrippant writes:
| Hello, I'm sure the part exists but can't find it in the modified bricks.
I'm looking for the reverse of #2458 (1x2 with pin) a 1x2 brick with a hole
instead of a pin.
|
https://www.bricklink.com/v2/catalog/catalogitem.page?P=3700#T=P
|
Author: | stutrippant | Posted: | Feb 11, 2020 14:54 | Subject: | Can't find a modified brick (reverse of 2458) | Viewed: | 126 times | Topic: | Catalog | Status: | Open | |
|
| Hello, I'm sure the part exists but can't find it in the modified bricks.
I'm looking for the reverse of #2458 (1x2 with pin) a 1x2 brick with a hole
instead of a pin.
|
Author: | gvbricks | Posted: | Feb 11, 2020 13:38 | Subject: | Inventory Change Request for Part 973pb3376c01 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part {Dark Bluish Gray to Black} 983 Hand
|
|
Author: | oukexergon | Posted: | Feb 11, 2020 13:36 | Subject: | Inventory Change Request for Set 76048-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 45301pb044L Black Wedge 16 x 4 Triple Curved with Red Octopus (Marvel HYDRA Logo) Pattern Model Left Side (Sticker) - Set 76048 (Counterpart)
* Add 1 Part 45301pb044R Black Wedge 16 x 4 Triple Curved with Red Octopus (Marvel HYDRA Logo) Pattern Model Right Side (Sticker) - Set 76048 (Counterpart)
|
|
|
Author: | Skumby | Posted: | Feb 11, 2020 12:21 | Subject: | add a stickered piece to the catalog | Viewed: | 51 times | Topic: | Catalog | Status: | Open | |
|
| Forgive me if this is in the wrong place, but I have no idea how this works.
I have a stickered piece from this set:
https://www.bricklink.com/v2/catalog/catalogitem.page?S=70909
That does not seem to exist in the catalog. How do I go about adding it or telling
someone to add it? Thanks!
|
Author: | Harald1643 | Posted: | Feb 11, 2020 12:05 | Subject: | Inventory Change Request for Set 76076-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 3062b Trans-Light Blue Brick, Round 1 x 1 Open Stud
|
|
Author: | SezaR | Posted: | Feb 11, 2020 05:07 | Subject: | Re: Inventory Change Request for Set 165-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Change {11 to 10} Part Red 3009 Brick 1 x 6
* Change {8 to 9} Part Red 3008 Brick 1 x 8
|
Red brick
appears on the following steps:
1 on step 4
1 on step 5
1 on step 6
4 on step 7
1 on step 8
1 on step 9
1 on step 10
Total=10
Red brick
appears on the following steps:
3 on step 9
4 on step 10
2 on step 11
Total=11
|
|
Author: | SezaR | Posted: | Feb 11, 2020 05:04 | Subject: | Inventory Change Request for Set 165-1 | Viewed: | 35 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {11 to 10} Part Red 3009 Brick 1 x 6
* Change {8 to 9} Part Red 3008 Brick 1 x 8
|
|
|
Author: | FreeStorm | Posted: | Feb 10, 2020 16:16 | Subject: | Re: Inventory change on minifig | Viewed: | 33 times | Topic: | Inventories | |
|
| In Inventories, Admin_Russell writes:
| ...there are two different versions of instructions, showing two different sticker
configurations. It is likely that both minifigures in the catalog are correct.
|
Should we add a note to set 641-1 to explain that it can come with different
instruction and sticker sheet?
How can I modify inventory for minifig?
You can see the problem there:
https://www.bricklink.com/catalogItemIn.asp?P=3840pb01&in=M
|
|
Author: | Admin_Russell | Posted: | Feb 10, 2020 15:33 | Subject: | Re: Inventory change on minifig | Viewed: | 47 times | Topic: | Inventories | |
|
|
BrickLink ID CardAdmin_Russell
|
Location: USA, California |
Member Since |
Contact |
Type |
Status |
May 9, 2017 |
|
Admin |
|
|
BrickLink Administrator |
|
| In Inventories, FreeStorm writes:
| In Inventories, FreeStorm writes:
| In Inventories, randyf writes:
| In Inventories, FreeStorm writes:
| What is the procedure when the inventory of a minifig is wrong?
Should I make the inventory change request like with set, or create a new minifig
and mark for deletion the older one?
Of course, the picture is also wrong.
-Fred
|
Which minifig?
|
|
and
[m=con004]
[m=con007]
Sticker on one side only of the vest (if sticker sheet is the right one):
[m=pln056]
|
Just be aware that the issue with those early stickers is really tricky. For
that one power shovel set you referenced:
https://www.bricklink.com/message.asp?ID=1179905
...there are two different versions of instructions, showing two different sticker
configurations. It is likely that both minifigures in the catalog are correct.
|
|
Author: | FreeStorm | Posted: | Feb 10, 2020 15:28 | Subject: | Re: Inventory change on minifig | Viewed: | 32 times | Topic: | Inventories | |
|
| In Inventories, FreeStorm writes:
| In Inventories, randyf writes:
| In Inventories, FreeStorm writes:
| What is the procedure when the inventory of a minifig is wrong?
Should I make the inventory change request like with set, or create a new minifig
and mark for deletion the older one?
Of course, the picture is also wrong.
-Fred
|
Which minifig?
|
|
and
[m=con004]
[m=con007]
Sticker on one side only of the vest (if sticker sheet is the right one):
[m=pln056]
|
|
Author: | FreeStorm | Posted: | Feb 10, 2020 15:15 | Subject: | Re: Inventory change on minifig | Viewed: | 40 times | Topic: | Inventories | |
|
| In Inventories, randyf writes:
| In Inventories, FreeStorm writes:
| What is the procedure when the inventory of a minifig is wrong?
Should I make the inventory change request like with set, or create a new minifig
and mark for deletion the older one?
Of course, the picture is also wrong.
-Fred
|
Which minifig?
|
|
|
Author: | randyf | Posted: | Feb 10, 2020 15:11 | Subject: | Re: Inventory change on minifig | Viewed: | 38 times | Topic: | Inventories | |
|
| In Inventories, FreeStorm writes:
| What is the procedure when the inventory of a minifig is wrong?
Should I make the inventory change request like with set, or create a new minifig
and mark for deletion the older one?
Of course, the picture is also wrong.
-Fred
|
Which minifig?
|
Author: | FreeStorm | Posted: | Feb 10, 2020 15:08 | Subject: | Inventory change on minifig | Viewed: | 74 times | Topic: | Inventories | Status: | Open | |
|
| What is the procedure when the inventory of a minifig is wrong?
Should I make the inventory change request like with set, or create a new minifig
and mark for deletion the older one?
Of course, the picture is also wrong.
-Fred
|
|
Author: | anathema | Posted: | Feb 10, 2020 14:41 | Subject: | Re: Inventory Change Request for Set 8847-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, anathema writes:
| Please make changes to the following inventory:
* Change 1 Part {White to Light Gray} 3701 Technic, Brick 1 x 4 with Holes {Alternate to Regular}
|
My bad, I accidentally left the setting on 'Regular' before submitting
- this should still be an 'Alternate' part.
Mind you, it would help if this field - like all the others - did not have a
default value...
|
|
Author: | anathema | Posted: | Feb 10, 2020 14:39 | Subject: | Re: Inventory Change Request for Set 8847-1 | Viewed: | 34 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, anathema writes:
| Please make changes to the following inventory:
* Change 1 Part {White to Light Gray} 3701 Technic, Brick 1 x 4 with Holes {Alternate to Regular}
Comments from Submitter:
The second version of the instructions shows this part as light grey.
|
|
|
|
Author: | anathema | Posted: | Feb 10, 2020 14:38 | Subject: | Inventory Change Request for Set 8847-1 | Viewed: | 51 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part {White to Light Gray} 3701 Technic, Brick 1 x 4 with Holes {Alternate to Regular}
Comments from Submitter:
The second version of the instructions shows this part as light grey.
|
|
Author: | StormChaser | Posted: | Feb 10, 2020 13:42 | Subject: | Re: February Roadmap Project: Old and New | Viewed: | 57 times | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| I'm not sure how we're going to do item numbers yet, so hold off on
those.
|
Okay, so we won't be changing item numbers at the moment. I have added that
portion of the project to the Catalog Roadmap (currently item 30):
https://www.bricklink.com/help.asp?helpID=2476
We also will not address Type 1/Type 2 items with this project. That has been
added as a separate project.
|
|
Author: | StormChaser | Posted: | Feb 10, 2020 13:28 | Subject: | Re: Description standardization note | Viewed: | 37 times | Topic: | Catalog | |
|
| In Catalog, mfav writes:
| It would be good for consistency in the catalog description if all instances
of numbers were either integers or words, not arbitrarily some of each.
|
Agreed. Have added it to the Catalog Roadmap (currently item 29):
https://www.bricklink.com/help.asp?helpID=2476
|
Author: | dmaster.hu | Posted: | Feb 10, 2020 13:21 | Subject: | Inventory Change Request for Set 75954-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3024 Trans-Orange Plate 1 x 1 (Extra)
|
|
Author: | Turez | Posted: | Feb 10, 2020 13:08 | Subject: | Re: Number of Poly Bags in Sets?? | Viewed: | 23 times | Topic: | Inventories | |
|
| In Inventories, mollysmommy writes:
| Is there any SOURCE that lists the NUMBER of poly bags in each set, especially
the older sets when the bags were not numbered? Would like to list a set as
“box opened, bags still sealed” but do not know if I am missing any bags. (Set
#7662 (SW: Trade Federation MTT) in particular this time).
|
For sets from that time period brickshelf is always worth a try.
For example:
http://www.brickshelf.com/cgi-bin/gallery.cgi?f=264352
And another one:
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=4219584
Regards,
Jonas
|
|
Author: | tonnic | Posted: | Feb 9, 2020 18:29 | Subject: | Re: Number of Poly Bags in Sets?? | Viewed: | 44 times | Topic: | Inventories | |
|
| In Inventories, mollysmommy writes:
| Is there any SOURCE that lists the NUMBER of poly bags in each set, especially
the older sets when the bags were not numbered? Would like to list a set as
“box opened, bags still sealed” but do not know if I am missing any bags. (Set
#7662 (SW: Trade Federation MTT) in particular this time).
|
At first try to weight the whole set and check the BL weight.
Otherwise this link may help you too.https://www.worthpoint.com/worthopedia/lego-star-wars-7662-trade-federation-459893715
|
|
Author: | mollysmommy | Posted: | Feb 9, 2020 17:38 | Subject: | Number of Poly Bags in Sets?? | Viewed: | 71 times | Topic: | Inventories | Status: | Open | |
|
| Is there any SOURCE that lists the NUMBER of poly bags in each set, especially
the older sets when the bags were not numbered? Would like to list a set as
“box opened, bags still sealed” but do not know if I am missing any bags. (Set
#7662 (SW: Trade Federation MTT) in particular this time).
|
|
Author: | Turez | Posted: | Feb 9, 2020 16:12 | Subject: | Re: Inventory Change Request for Set 6667-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| In Inventories Requests, Turez writes:
| In Inventories Requests, paulvdb writes:
| Please make changes to the following inventory:
* Add 5 Part 2412a Light Gray Tile, Modified 1 x 2 Grille without Bottom Groove / Lip (match ID 2)
* Change 5 Part Light Gray 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip {Regular to Alternate} {match ID 0 to 2}
Comments from Submitter:
https://forum.brickpirate.net/viewtopic.php?f=18&t=24109 shows 2412a. Set in my personal collection has 2412b so both variants should be in this inventory.
|
Unfortunately it is not clear if the parts used to build the set for that review
are original. They are definitly not new (at least the technic axle has clearly
visible signs of usage) and the user "TOOL" mentioned somewhere in another review
thread that he sometimes uses two copies of a set for the reviews (a new one
to show the sealed bags and a used one to show the parts and the completed model).
Therefore in this case I would not consider the photos as a reliable source.
Regards,
Jonas
|
I don't see any parts in that review that look particularly used. The Technic
axle has visible plastic flow lines in it, but I don't see any wear on it.
|
I have never seen anything like that on a new axle, but you may be right and
then everything is fine.
(Nevertheless I suggest to be careful with pics from that source. Here we can
see the wrong variant
for example:
https://forum.brickpirate.net/viewtopic.php?f=19&t=10447 )
|
|
Author: | randyf | Posted: | Feb 9, 2020 15:45 | Subject: | Re: Inventory Change Request for Set 6667-1 | Viewed: | 32 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| In Inventories Requests, paulvdb writes:
| Please make changes to the following inventory:
* Add 5 Part 2412a Light Gray Tile, Modified 1 x 2 Grille without Bottom Groove / Lip (match ID 2)
* Change 5 Part Light Gray 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip {Regular to Alternate} {match ID 0 to 2}
Comments from Submitter:
https://forum.brickpirate.net/viewtopic.php?f=18&t=24109 shows 2412a. Set in my personal collection has 2412b so both variants should be in this inventory.
|
Unfortunately it is not clear if the parts used to build the set for that review
are original. They are definitly not new (at least the technic axle has clearly
visible signs of usage) and the user "TOOL" mentioned somewhere in another review
thread that he sometimes uses two copies of a set for the reviews (a new one
to show the sealed bags and a used one to show the parts and the completed model).
Therefore in this case I would not consider the photos as a reliable source.
Regards,
Jonas
|
I don't see any parts in that review that look particularly used. The Technic
axle has visible plastic flow lines in it, but I don't see any wear on it.
Cheers,
Randy
|
|
Author: | Turez | Posted: | Feb 9, 2020 15:22 | Subject: | Re: Inventory Change Request for Set 6667-1 | Viewed: | 28 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
| Please make changes to the following inventory:
* Add 5 Part 2412a Light Gray Tile, Modified 1 x 2 Grille without Bottom Groove / Lip (match ID 2)
* Change 5 Part Light Gray 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip {Regular to Alternate} {match ID 0 to 2}
Comments from Submitter:
https://forum.brickpirate.net/viewtopic.php?f=18&t=24109 shows 2412a. Set in my personal collection has 2412b so both variants should be in this inventory.
|
Unfortunately it is not clear if the parts used to build the set for that review
are original. They are definitly not new (at least the technic axle has clearly
visible signs of usage) and the user "TOOL" mentioned somewhere in another review
thread that he sometimes uses two copies of a set for the reviews (a new one
to show the sealed bags and a used one to show the parts and the completed model).
Therefore in this case I would not consider the photos as a reliable source.
Regards,
Jonas
|
|
Author: | randyf | Posted: | Feb 9, 2020 12:47 | Subject: | Re: Inventory Change Request for Set 4758-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 1 Part {Earth Orange to Dark Nougat} 30374 Bar 4L (Lightsaber Blade / Wand)
Comments from Submitter:
Pics to follow
|
Congratulations on being the first person to get a true Dark Nougat part into
an inventory!
|
I scrambled for it.
|
I knew you would.
|
|
Author: | StormChaser | Posted: | Feb 9, 2020 12:41 | Subject: | Re: 3297 smooth or rough surface? | Viewed: | 41 times | Topic: | Catalog | |
|
| In Catalog, Lamondera writes:
| Hello, I have two different versions of the slope 3297, some smooth and some
with a rough surface. Is there a single entry for both?
|
Yes, there is a single entry:
|
|
Author: | FreeStorm | Posted: | Feb 9, 2020 12:40 | Subject: | Re: Description Standardization Note | Viewed: | 40 times | Topic: | Catalog | |
|
| In Catalog, calsbricks writes:
| In Catalog, FreeStorm writes:
| In Catalog, calsbricks writes:
| My preferred option is to let your SQL guy (that is if you have one. Our belief
from the Chicago round table discussion was that none of the developers at that
time had any SQL experience whatsoever) spend 10 minutes producing your query
(9 minutes for understanding the table and 1 minute for writing the query. Once
the results are in front of you it might be possible for your sql guy to write
an update query to do all the updates at once.
This is almost as simple as changing colour names from one to another
|
Of course changes should be made on DB directly with write logs into "change-log
table" as well (to have an history of what is made)
But for that, you need SQL guy (not your nephew) and "real" database.
Please don't play with Excel
|
No fears I am not a programmer and neither is he - we leave it to those that
have a passion for it.
|
How can I say?
The "you" on my messages was not directed to a specific person,it's addressed
to everybody and nobody
|
|
Author: | calsbricks | Posted: | Feb 9, 2020 12:10 | Subject: | Re: Description Standardization Note | Viewed: | 40 times | Topic: | Catalog | |
|
| In Catalog, FreeStorm writes:
| In Catalog, calsbricks writes:
| My preferred option is to let your SQL guy (that is if you have one. Our belief
from the Chicago round table discussion was that none of the developers at that
time had any SQL experience whatsoever) spend 10 minutes producing your query
(9 minutes for understanding the table and 1 minute for writing the query. Once
the results are in front of you it might be possible for your sql guy to write
an update query to do all the updates at once.
This is almost as simple as changing colour names from one to another
|
Of course changes should be made on DB directly with write logs into "change-log
table" as well (to have an history of what is made)
But for that, you need SQL guy (not your nephew) and "real" database.
Please don't play with Excel
|
No fears I am not a programmer and neither is he - we leave it to those that
have a passion for it.
|
|
Author: | FreeStorm | Posted: | Feb 9, 2020 12:01 | Subject: | Re: Description Standardization Note | Viewed: | 35 times | Topic: | Catalog | |
|
| In Catalog, calsbricks writes:
| My preferred option is to let your SQL guy (that is if you have one. Our belief
from the Chicago round table discussion was that none of the developers at that
time had any SQL experience whatsoever) spend 10 minutes producing your query
(9 minutes for understanding the table and 1 minute for writing the query. Once
the results are in front of you it might be possible for your sql guy to write
an update query to do all the updates at once.
This is almost as simple as changing colour names from one to another
|
Of course changes should be made on DB directly with write logs into "change-log
table" as well (to have an history of what is made)
But for that, you need SQL guy (not your nephew) and "real" database.
Please don't play with Excel
|
|
Author: | paulvdb | Posted: | Feb 9, 2020 11:54 | Subject: | Inventory Change Request for Set 6667-1 | Viewed: | 34 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 5 Part 2412a Light Gray Tile, Modified 1 x 2 Grille without Bottom Groove / Lip (match ID 2)
* Change 5 Part Light Gray 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip {Regular to Alternate} {match ID 0 to 2}
Comments from Submitter:
https://forum.brickpirate.net/viewtopic.php?f=18&t=24109 shows 2412a. Set in my personal collection has 2412b so both variants should be in this inventory.
|
|
Author: | calsbricks | Posted: | Feb 9, 2020 11:42 | Subject: | Re: Description Standardization Note | Viewed: | 37 times | Topic: | Catalog | |
|
| In Catalog, calsbricks writes:
| In Catalog, constructibles writes:
| In Catalog, StormChaser writes:
|
And perhaps, when the next problem comes along, examining all of them again.
It almost makes a person think that there must be a better way . . .
|
Export the catalog to txt, and open in Excel. This will give you pretty much
unlimited ability to search. Write an Excel formula to find what you are looking
for. You can even write a formula to create the desired replacement title
if you like, then just copy paste the change back to BL.
Regexp is a little harder to do, but Google “Excel Regexp” and you’ll get some
examples how to create your own function Using Excel VB.
|
Or if you are just not into programming or that technical you could follow the
guidelines set out here for using the advanced filter option in Excel
https://support.microsoft.com/en-gb/help/2720580/using-advanced-filters-in-excel-2010
Good luck with that.
My preferred option is to let your SQL guy (that is if you have one. Our belief
from the Chicago round table discussion was that none of the developers at that
time had any SQL experience whatsoever) spend 10 minutes producing your query
(9 minutes for understanding the table and 1 minute for writing the query. Once
the results are in front of you it might be possible for your sql guy to write
an update query to do all the updates at once.
This is almost as simple as changing colour names from one to another
|
Guess what - as an exercise I just tried this in Brickstok - it works a treat.
Use the filters to suggest the description contains a number or the word for
that number.
The only problem is once it found them all I could not easily mass update them.
The search works great though.
|
|
Author: | calsbricks | Posted: | Feb 9, 2020 10:15 | Subject: | Re: Description Standardization Note | Viewed: | 47 times | Topic: | Catalog | |
|
| In Catalog, constructibles writes:
| In Catalog, StormChaser writes:
|
And perhaps, when the next problem comes along, examining all of them again.
It almost makes a person think that there must be a better way . . .
|
Export the catalog to txt, and open in Excel. This will give you pretty much
unlimited ability to search. Write an Excel formula to find what you are looking
for. You can even write a formula to create the desired replacement title
if you like, then just copy paste the change back to BL.
Regexp is a little harder to do, but Google “Excel Regexp” and you’ll get some
examples how to create your own function Using Excel VB.
|
Or if you are just not into programming or that technical you could follow the
guidelines set out here for using the advanced filter option in Excel
https://support.microsoft.com/en-gb/help/2720580/using-advanced-filters-in-excel-2010
Good luck with that.
My preferred option is to let your SQL guy (that is if you have one. Our belief
from the Chicago round table discussion was that none of the developers at that
time had any SQL experience whatsoever) spend 10 minutes producing your query
(9 minutes for understanding the table and 1 minute for writing the query. Once
the results are in front of you it might be possible for your sql guy to write
an update query to do all the updates at once.
This is almost as simple as changing colour names from one to another
|
|
Author: | constructibles | Posted: | Feb 9, 2020 09:38 | Subject: | Re: Description Standardization Note | Viewed: | 43 times | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
|
And perhaps, when the next problem comes along, examining all of them again.
It almost makes a person think that there must be a better way . . .
|
Export the catalog to txt, and open in Excel. This will give you pretty much
unlimited ability to search. Write an Excel formula to find what you are looking
for. You can even write a formula to create the desired replacement title
if you like, then just copy paste the change back to BL.
Regexp is a little harder to do, but Google “Excel Regexp” and you’ll get some
examples how to create your own function Using Excel VB.
|
|
Author: | evvdu95 | Posted: | Feb 9, 2020 09:35 | Subject: | Inventory Change Request for Set 6667-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4073 Black Plate, Round 1 x 1 (Extra)
* Add 1 Part 4073 Trans-Yellow Plate, Round 1 x 1 (Extra)
Comments from Submitter:
Sealed set review here:
https://forum.brickpirate.net/viewtopic.php?f=18&t=24109
|
|
Author: | axaday | Posted: | Feb 9, 2020 08:35 | Subject: | Re: Inventory Change Request for Set 4758-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 1 Part {Earth Orange to Dark Nougat} 30374 Bar 4L (Lightsaber Blade / Wand)
Comments from Submitter:
Pics to follow
|
Congratulations on being the first person to get a true Dark Nougat part into
an inventory!
|
I scrambled for it.
|
|
Author: | Lamondera | Posted: | Feb 9, 2020 06:53 | Subject: | 3297 smooth or rough surface? | Viewed: | 88 times | Topic: | Catalog | Status: | Open | |
|
| Hello, I have two different versions of the slope 3297, some smooth and some
with a rough surface. Is there a single entry for both?
|
|
Author: | calsbricks | Posted: | Feb 9, 2020 06:29 | Subject: | Re: Description Standardization Note | Viewed: | 41 times | Topic: | Catalog | |
|
| In Catalog, FreeStorm writes:
| For other type than Parts:
(after that I stop spaming)
=========================
BOOK
-------------------------
biocom01
Bionicle # 1 June 2001 Six Heroes One Destiny
biocom01sp1
Bionicle # 1 Six Heroes One Destiny Special San Diego Comic-Con 2003 Edition
biocom01sp2
Bionicle # 1 July 2003 Six Heroes One Destiny - Mini Version
biocom01a
Bionicle # 1 April 2001 Six Heroes One Destiny
9607b4
Set 9607 Activity Booklet 4 - {Machine using Belt and two Gears}
9603b34
Set 9603 Activity Card Application: Simulation 7 - Two Toting
9603b61
Set 9603 Activity Card Application: Invention 4 - One at a Time!
9603b34AU
Set 9603 Activity Card Application: Simulation 7 - Two Up AUS version (118022)
9603b61AU
Set 9603 Activity Card Application: Invention 4 - One at a Time! AUS version
(118122)
=========================
SET
-------------------------
046-1
28 assorted basic brick - white plus 8 flat plates - white plus one 10 x 10 stud
red base plate
=========================
GEAR
-------------------------
9804
Playtable with Two Bins, 2 Seats and Two Building Plates
4495784
Playtable with One Bin, 4 Seats and 4 Building Plates
4646117
Display Assembled Set, Cars 2 Six Main Characters in Plastic Case
=========================
MINIFIG
-------------------------
6453pb004
Duplo Figure, Child Type 2 Boy, Blue Legs, Red Top with White Stripes and Blue
Overalls with One Strap
6453pb003
Duplo Figure, Child Type 2 Boy, Blue Legs, Green Top with Blue Overalls with
one Strap
6453pb021
Duplo Figure, Child Type 2 Girl, Red Legs, White Top with Red Overalls with one
Strap
=========================
ORIGINAL_BOX
-------------------------
046-1
28 assorted basic brick - white plus 8 flat plates - white plus one 10 x 10 stud
red base plate
|
Not spamming - helping the community and the catalogue people who do not have
your abilities.
|
|
Author: | FreeStorm | Posted: | Feb 9, 2020 06:26 | Subject: | Re: Description Standardization Note | Viewed: | 38 times | Topic: | Catalog | |
|
| For other type than Parts:
(after that I stop spaming)
=========================
BOOK
-------------------------
biocom01
Bionicle # 1 June 2001 Six Heroes One Destiny
biocom01sp1
Bionicle # 1 Six Heroes One Destiny Special San Diego Comic-Con 2003 Edition
biocom01sp2
Bionicle # 1 July 2003 Six Heroes One Destiny - Mini Version
biocom01a
Bionicle # 1 April 2001 Six Heroes One Destiny
9607b4
Set 9607 Activity Booklet 4 - {Machine using Belt and two Gears}
9603b34
Set 9603 Activity Card Application: Simulation 7 - Two Toting
9603b61
Set 9603 Activity Card Application: Invention 4 - One at a Time!
9603b34AU
Set 9603 Activity Card Application: Simulation 7 - Two Up AUS version (118022)
9603b61AU
Set 9603 Activity Card Application: Invention 4 - One at a Time! AUS version
(118122)
=========================
SET
-------------------------
046-1
28 assorted basic brick - white plus 8 flat plates - white plus one 10 x 10 stud
red base plate
=========================
GEAR
-------------------------
9804
Playtable with Two Bins, 2 Seats and Two Building Plates
4495784
Playtable with One Bin, 4 Seats and 4 Building Plates
4646117
Display Assembled Set, Cars 2 Six Main Characters in Plastic Case
=========================
MINIFIG
-------------------------
6453pb004
Duplo Figure, Child Type 2 Boy, Blue Legs, Red Top with White Stripes and Blue
Overalls with One Strap
6453pb003
Duplo Figure, Child Type 2 Boy, Blue Legs, Green Top with Blue Overalls with
one Strap
6453pb021
Duplo Figure, Child Type 2 Girl, Red Legs, White Top with Red Overalls with one
Strap
=========================
ORIGINAL_BOX
-------------------------
046-1
28 assorted basic brick - white plus 8 flat plates - white plus one 10 x 10 stud
red base plate
|
|
Author: | calsbricks | Posted: | Feb 9, 2020 06:09 | Subject: | Re: Description Standardization Note | Viewed: | 51 times | Topic: | Catalog | |
|
| In Catalog, FreeStorm writes:
| My search for parts with integers and words numbers in description (of course
dimension like "1 x 2 x 2" is not included on integer number search)
result = 58 parts
You can start with "only" 58 parts and not 100K+
PS: my search is not perfect, but it not the goal
The goal is to reduce the search results for human brain analysis
==================
13252pb01
Windscreen 12 x 6 x 2 with Locking Dual 2 Fingers Hinge with SW Red Five X-wing
Starfighter Pattern (4 Stickers) - Set 10240
14222pb009
Duplo, Brick 1 x 3 x 2 Round Top, Cut Away Sides with Number 1 and Two Stars
in Circle Pattern
|
That's a good start
|
18455
Hinge Brick 2 x 4 Locking with 1 Finger on Top at One End
21557pb01
Minifigure, Headgear Helmet with Respiratory Pipe and SW Ep. 7 TIE Fighter Pilot
First Order with Two White Lines Pattern
21557pb03
Minifigure, Headgear Helmet with Respiratory Pipe and SW Ep. 8 TIE Fighter Pilot
First Order with Three White Lines Pattern
230.1stk01a
Sticker for Set 230-1 - Two Sheet Version - Sheet 1 - (4319)
230.1stk02a
Sticker for Set 230-1 - Two Sheet Version - Sheet 2 - (4096)
232stk01a
Sticker for Set 232 - Two Sheet Version - Sheet 1 - (4424)
232stk02a
Sticker for Set 232 - Two Sheet Version - Sheet 2 - (4102)
2335pb141
Flag 2 x 2 Square with Checkered Pattern on One Side, 2 Black Diagonal Corners
(Sticker) - Set 4982
24902
Cloth Cape with 4 Holes, Slit and Two Long Panels, Large Buildable Figures
2958pb002
Technic, Disk 3 x 3 with 4 Black Sections on One Side and 8 on Reverse Pattern
30350cpb033L
Tile, Modified 2 x 3 with 2 Clips (thick U clips) with 'FR ALL FOR ONE allinol'
Pattern Model Left Side (Sticker) - Set 8678
30350cpb033R
Tile, Modified 2 x 3 with 2 Clips (thick U clips) with 'FR ALL FOR ONE allinol'
Pattern Model Right Side (Sticker) - Set 8678
30360pb03
Cylinder 3 x 6 x 2 2/3 Horizontal with Two Scratched Space Police 3 Badges Pattern
(Stickers) - Set 5972
30414pb01
Brick, Modified 1 x 4 with 4 Studs on One Side with Black and Yellow Danger Stripes
Pattern (Sticker) - Set 7781
30414pb02
Brick, Modified 1 x 4 with 4 Studs on One Side with Train Logo White on Yellow
Background Pattern (Sticker) - Set 7939
3068bpb0112
Tile 2 x 2 with Groove with Grille Five Bar Pattern 1 (Sticker) - Set 7256
3068bpb0135
Tile 2 x 2 with Groove with Grille Five Bar Pattern 2 (Sticker) - Set 7256
3068bpb0141
Tile 2 x 2 with Groove with One White Triangle Pattern 1 (Sticker) - Set 7252
3068bpb0398
Tile 2 x 2 with Groove with One White Triangle Pattern 2 (Sticker) - Set 7252
3068bpb0672
Tile 2 x 2 with Groove with Two Yellow Stripes and Black Number 7 in White Circle
Pattern (Sticker) - Set 8154
3069bpb618
Tile 1 x 2 with Groove with Two Black Boxes with 3 Stripes Pattern (Sticker)
- Set 8681
31000pb28
Primo Brick 1 x 1 with Three Flowers and Number 3 on Opposite Side Pattern
31000pb29
Primo Brick 1 x 1 with Two Snakes and Number 2 on Opposite Side Pattern
32171pb032
Throwbot Disk, Jet / Judge, 3 pips, Jet throwing two disks Pattern
32171pb059
Throwbot Disk, Blaster, 6 pips, Blaster and two 'bots with fire background
Pattern
3298pb011
Slope 33 3 x 2 with Red Number 2 and Two Green Stripes Pattern
36315
Mini Doll, Cape Cloth, 5 Curly Points, One Side Black, One Side Dark Turquoise
41855pb09
Brick, Modified 2 x 2 x 2/3 Two Studs, Lip End with Silver/Black/Red Number 3
Left Half Pattern
41855pb10
Brick, Modified 2 x 2 x 2/3 Two Studs, Lip End with Silver/Black/Red Number 3
Right Half Pattern
42380apb01
Foam, Soccer Target 10 x 9 with One Hole and Number 5 and Soccer Ball (Football)
Pattern (Stickers) - Set 3423
4318
Boat Mast 2 x 2 x 9 2/3 Bar with Slot on Top and 2 Finger Hinge on Two Sides
45399
Garage Door 1 x 12 x 9 with Three Windows, Locking Dual 2 Finger Hinges
45403
Brick, Modified 5 x 12 with Two 1 x 2 Cutouts, 3 Holes on Side
45403c01
Brick, Modified 5 x 12 with Two 1 x 2 Cutouts, 1 Hole and 2 Fixed Rotatable Friction
Pins on Side
47456pb003
Brick, Modified 2 x 3 x 2/3 Two Studs, Wing End with 8 Black Stripes Pattern
(Stickers) - Set 8122
47456pb008L
Brick, Modified 2 x 3 x 2/3 Two Studs, Wing End with Rust and 3 Rivets Pattern
Model Left Side (Sticker) - Set 70143
47456pb008R
Brick, Modified 2 x 3 x 2/3 Two Studs, Wing End with Rust and 4 Rivets Pattern
Model Right Side (Sticker) - Set 70143
47457pb02
Brick, Modified 2 x 2 x 2/3 Two Studs, Curved Slope End with Yellow Triangle
on 3 Bars Pattern
48452cx1pb02
Technic Turntable Large Type 2 with Black Outside Gear Section with Two Silver
Tread Plates Pattern (Stickers) - Set 8292
5005358cdb02
Paper, Cardboard Backdrop for Set 5005358, Card with Two Square Holes and Pictures
of 5 Minifigures
52886
Mini Doll, Cape Cloth, Friends, Tapered with 1 Small Top Hole - Traditional Starched
Fabric, One Side Shiny
58006
Mini Doll, Cape Cloth, Scalloped 3 Points - Traditional Starched Fabric, One
Side Shiny
61484pb004
Windscreen 5 x 6 x 2 Curved Top Canopy with 4 Studs with Fire Logo with Two White
Stripes Pattern (Sticker) - Set 7207
61547pb01
Mini Doll, Cape Cloth, Bell Shaped with 3 Notches, One Side Magenta, One Side
Dark Purple
61667pb01
Mini Doll, Cape Cloth, 2 Long Tails, One Side Glitter
89509
Propeller 1 Blade 14L with Two Pin Holes and Four Axles
90640pb008
Hero Factory Armor with Ball Joint Socket - Size 4 with Three Stripes Pattern
BA013pb04
Stickered Assembly 2 x 4 with Six Ice Creams Pattern (Sticker) - Set 6414 - 2
Tiles 2 x 2
BA087pb01
Stickered Assembly 2 x 2 x 2 with Butterfly and Two Flowers Pattern (Sticker)
- Set 6410 - 1 Brick 1 x 2, 1 Brick 2 x 2
bb0141ac45
Electric, Wire 4.5V with two light gray 2-prong Type 1 connectors, 45 Studs Long
bb0141ac96
Electric, Wire 4.5V with two light gray 2-prong Type 1 connectors, 96 Studs Long
bb0236bc96
Electric, Wire 4.5V with two blue 2-prong Type 2 connectors (with cross-cut pins),
96 Studs Long
duploracer01
Duplo Car Formula One with Yellow Wheels and Yellow Number 1 Pattern
duploracer02
Duplo Car Formula One with Blue Bottom and Yellow Number 2 Pattern
duploracer02a
Duplo Car Formula One with Blue Bottom and Yellow Number 2 Pattern, 1 Stud in
Cab
x277
Hinge 1 x 4 Triangle with Two Pins, Locking 1 Finger
|
|
|
Author: | FreeStorm | Posted: | Feb 9, 2020 06:07 | Subject: | Re: Description Standardization Note | Viewed: | 53 times | Topic: | Catalog | |
|
| My search for parts with integers and words numbers in description (of course
dimension like "1 x 2 x 2" is not included on integer number search)
result = 58 parts
You can start with "only" 58 parts and not 100K+
PS: my search is not perfect, but it not the goal
The goal is to reduce the search results for human brain analysis
==================
13252pb01
Windscreen 12 x 6 x 2 with Locking Dual 2 Fingers Hinge with SW Red Five X-wing
Starfighter Pattern (4 Stickers) - Set 10240
14222pb009
Duplo, Brick 1 x 3 x 2 Round Top, Cut Away Sides with Number 1 and Two Stars
in Circle Pattern
18455
Hinge Brick 2 x 4 Locking with 1 Finger on Top at One End
21557pb01
Minifigure, Headgear Helmet with Respiratory Pipe and SW Ep. 7 TIE Fighter Pilot
First Order with Two White Lines Pattern
21557pb03
Minifigure, Headgear Helmet with Respiratory Pipe and SW Ep. 8 TIE Fighter Pilot
First Order with Three White Lines Pattern
230.1stk01a
Sticker for Set 230-1 - Two Sheet Version - Sheet 1 - (4319)
230.1stk02a
Sticker for Set 230-1 - Two Sheet Version - Sheet 2 - (4096)
232stk01a
Sticker for Set 232 - Two Sheet Version - Sheet 1 - (4424)
232stk02a
Sticker for Set 232 - Two Sheet Version - Sheet 2 - (4102)
2335pb141
Flag 2 x 2 Square with Checkered Pattern on One Side, 2 Black Diagonal Corners
(Sticker) - Set 4982
24902
Cloth Cape with 4 Holes, Slit and Two Long Panels, Large Buildable Figures
2958pb002
Technic, Disk 3 x 3 with 4 Black Sections on One Side and 8 on Reverse Pattern
30350cpb033L
Tile, Modified 2 x 3 with 2 Clips (thick U clips) with 'FR ALL FOR ONE allinol'
Pattern Model Left Side (Sticker) - Set 8678
30350cpb033R
Tile, Modified 2 x 3 with 2 Clips (thick U clips) with 'FR ALL FOR ONE allinol'
Pattern Model Right Side (Sticker) - Set 8678
30360pb03
Cylinder 3 x 6 x 2 2/3 Horizontal with Two Scratched Space Police 3 Badges Pattern
(Stickers) - Set 5972
30414pb01
Brick, Modified 1 x 4 with 4 Studs on One Side with Black and Yellow Danger Stripes
Pattern (Sticker) - Set 7781
30414pb02
Brick, Modified 1 x 4 with 4 Studs on One Side with Train Logo White on Yellow
Background Pattern (Sticker) - Set 7939
3068bpb0112
Tile 2 x 2 with Groove with Grille Five Bar Pattern 1 (Sticker) - Set 7256
3068bpb0135
Tile 2 x 2 with Groove with Grille Five Bar Pattern 2 (Sticker) - Set 7256
3068bpb0141
Tile 2 x 2 with Groove with One White Triangle Pattern 1 (Sticker) - Set 7252
3068bpb0398
Tile 2 x 2 with Groove with One White Triangle Pattern 2 (Sticker) - Set 7252
3068bpb0672
Tile 2 x 2 with Groove with Two Yellow Stripes and Black Number 7 in White Circle
Pattern (Sticker) - Set 8154
3069bpb618
Tile 1 x 2 with Groove with Two Black Boxes with 3 Stripes Pattern (Sticker)
- Set 8681
31000pb28
Primo Brick 1 x 1 with Three Flowers and Number 3 on Opposite Side Pattern
31000pb29
Primo Brick 1 x 1 with Two Snakes and Number 2 on Opposite Side Pattern
32171pb032
Throwbot Disk, Jet / Judge, 3 pips, Jet throwing two disks Pattern
32171pb059
Throwbot Disk, Blaster, 6 pips, Blaster and two 'bots with fire background
Pattern
3298pb011
Slope 33 3 x 2 with Red Number 2 and Two Green Stripes Pattern
36315
Mini Doll, Cape Cloth, 5 Curly Points, One Side Black, One Side Dark Turquoise
41855pb09
Brick, Modified 2 x 2 x 2/3 Two Studs, Lip End with Silver/Black/Red Number 3
Left Half Pattern
41855pb10
Brick, Modified 2 x 2 x 2/3 Two Studs, Lip End with Silver/Black/Red Number 3
Right Half Pattern
42380apb01
Foam, Soccer Target 10 x 9 with One Hole and Number 5 and Soccer Ball (Football)
Pattern (Stickers) - Set 3423
4318
Boat Mast 2 x 2 x 9 2/3 Bar with Slot on Top and 2 Finger Hinge on Two Sides
45399
Garage Door 1 x 12 x 9 with Three Windows, Locking Dual 2 Finger Hinges
45403
Brick, Modified 5 x 12 with Two 1 x 2 Cutouts, 3 Holes on Side
45403c01
Brick, Modified 5 x 12 with Two 1 x 2 Cutouts, 1 Hole and 2 Fixed Rotatable Friction
Pins on Side
47456pb003
Brick, Modified 2 x 3 x 2/3 Two Studs, Wing End with 8 Black Stripes Pattern
(Stickers) - Set 8122
47456pb008L
Brick, Modified 2 x 3 x 2/3 Two Studs, Wing End with Rust and 3 Rivets Pattern
Model Left Side (Sticker) - Set 70143
47456pb008R
Brick, Modified 2 x 3 x 2/3 Two Studs, Wing End with Rust and 4 Rivets Pattern
Model Right Side (Sticker) - Set 70143
47457pb02
Brick, Modified 2 x 2 x 2/3 Two Studs, Curved Slope End with Yellow Triangle
on 3 Bars Pattern
48452cx1pb02
Technic Turntable Large Type 2 with Black Outside Gear Section with Two Silver
Tread Plates Pattern (Stickers) - Set 8292
5005358cdb02
Paper, Cardboard Backdrop for Set 5005358, Card with Two Square Holes and Pictures
of 5 Minifigures
52886
Mini Doll, Cape Cloth, Friends, Tapered with 1 Small Top Hole - Traditional Starched
Fabric, One Side Shiny
58006
Mini Doll, Cape Cloth, Scalloped 3 Points - Traditional Starched Fabric, One
Side Shiny
61484pb004
Windscreen 5 x 6 x 2 Curved Top Canopy with 4 Studs with Fire Logo with Two White
Stripes Pattern (Sticker) - Set 7207
61547pb01
Mini Doll, Cape Cloth, Bell Shaped with 3 Notches, One Side Magenta, One Side
Dark Purple
61667pb01
Mini Doll, Cape Cloth, 2 Long Tails, One Side Glitter
89509
Propeller 1 Blade 14L with Two Pin Holes and Four Axles
90640pb008
Hero Factory Armor with Ball Joint Socket - Size 4 with Three Stripes Pattern
BA013pb04
Stickered Assembly 2 x 4 with Six Ice Creams Pattern (Sticker) - Set 6414 - 2
Tiles 2 x 2
BA087pb01
Stickered Assembly 2 x 2 x 2 with Butterfly and Two Flowers Pattern (Sticker)
- Set 6410 - 1 Brick 1 x 2, 1 Brick 2 x 2
bb0141ac45
Electric, Wire 4.5V with two light gray 2-prong Type 1 connectors, 45 Studs Long
bb0141ac96
Electric, Wire 4.5V with two light gray 2-prong Type 1 connectors, 96 Studs Long
bb0236bc96
Electric, Wire 4.5V with two blue 2-prong Type 2 connectors (with cross-cut pins),
96 Studs Long
duploracer01
Duplo Car Formula One with Yellow Wheels and Yellow Number 1 Pattern
duploracer02
Duplo Car Formula One with Blue Bottom and Yellow Number 2 Pattern
duploracer02a
Duplo Car Formula One with Blue Bottom and Yellow Number 2 Pattern, 1 Stud in
Cab
x277
Hinge 1 x 4 Triangle with Two Pins, Locking 1 Finger
|
|
Author: | BrickCompulsion | Posted: | Feb 9, 2020 04:58 | Subject: | Re: Description standardization note | Viewed: | 45 times | Topic: | Catalog | |
|
| I totally support this change
Consistency is key
Maybe search and change all you can find and then put it out there on here for
messages about items missed. That’s if the sql person is on holiday or unavailable
|
|
Author: | calsbricks | Posted: | Feb 9, 2020 04:49 | Subject: | Re: Description Standardization Note | Viewed: | 44 times | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| In Catalog, mfav writes:
| It would be good for consistency in the catalog description if all instances
of numbers were either integers or words, not arbitrarily some of each.
|
I have noticed this before and definitely agree it needs to be worked on. The
problem is (and I'm starting to understand the rearranging the chairs thing)
there are too many problems.
In the case of this problem, you can't even find the problem because you
can't search for it. So it would involve examining every single catalog
entry. All 100K+ of them.
And perhaps, when the next problem comes along, examining all of them again.
It almost makes a person think that there must be a better way . .
|
The answer is really quite simple - talk to a SQL person and they will advise
you how to organise your query to find precisely what you want. It isn't
rocket science. .
|
|
Author: | FreeStorm | Posted: | Feb 9, 2020 03:59 | Subject: | Re: Description Standardization Note | Viewed: | 46 times | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| In the case of this problem, you can't even find the problem because you
can't search for it. So it would involve examining every single catalog
entry. All 100K+ of them.
|
What do you want to find?
Something like this?
"* three *" = 153 results
"* 3 *" = 6675 results
"* three *" AND "* 3 *" = 16 results
As example, last search find:
"Technic, Panel Car Spoiler 3 x 8 with Three Holes and Black and Yellow Danger
Stripes and Mud Pattern (Stickers) - Set 7968"
"Primo Brick 1 x 1 with Three Flowers and Number 3 on Opposite Side Pattern"
Of course,I made query to find only for "three" and "3" on same description,
but with a regexp it should be simple to spot every "word digit" with "digit"
on same description like "blah with two legs and 1 arm"
Some other incoherence (digit 3 should be between '' when you have pattern
after):
"*number 3 *pattern*" = 22 result
"*number '3' *pattern*" = 3 result
If you know what you want to find, it should be easy to make a search query,
to spot the majority of incoherence.
-Fred
|
|
Author: | SezaR | Posted: | Feb 9, 2020 03:44 | Subject: | Re: Inventory Change Request for Set 6074-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Change 1 Part Blue 4502a Minifigure, Plume Feather Small {Regular to Extra}
* Change 1 Part Red 4502a Minifigure, Plume Feather Small {Regular to Extra}
Comments from Submitter:
I do not see these parts used on any model. If they are not going to be in the inventory as sprue, isn't it better to move them to the extra section?
|
From the Additional Information About Regular Items section of the Inventory
Sections: Regular, Extra, Counterpart, and Alternate help page:
https://www.bricklink.com/help.asp?helpID=1562
Parts on Sprues - Complete sprues are included in this section unless
some parts from the sprues are used in minifigures. In that case, the parts from
the sprues that are not used in minifigures are included in this section.
These requests will not be accepted.
Cheers,
Randy
|
I don't find this a good policy for this case.
Cheers,
Reza
|
All parts used for main or any other model of the set go to the regular section.
This is a good policy for regular section. Any other part that happened to come
with the set, not used in any model, directly or indirectly, is better to be
in the extra section.
I see we will have anyway some inconsistency with parts coming with sprues, no
matter which policy is chosen.
|
|
Author: | StormChaser | Posted: | Feb 9, 2020 03:29 | Subject: | Re: Description Standardization Note | Viewed: | 60 times | Topic: | Catalog | |
|
| In Catalog, mfav writes:
| It would be good for consistency in the catalog description if all instances
of numbers were either integers or words, not arbitrarily some of each.
|
I have noticed this before and definitely agree it needs to be worked on. The
problem is (and I'm starting to understand the rearranging the chairs thing)
there are too many problems.
In the case of this problem, you can't even find the problem because you
can't search for it. So it would involve examining every single catalog
entry. All 100K+ of them.
And perhaps, when the next problem comes along, examining all of them again.
It almost makes a person think that there must be a better way . . .
|
|
Author: | randyf | Posted: | Feb 9, 2020 03:22 | Subject: | Re: Inventory Change Request for Set 6074-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Change 1 Part Blue 4502a Minifigure, Plume Feather Small {Regular to Extra}
* Change 1 Part Red 4502a Minifigure, Plume Feather Small {Regular to Extra}
Comments from Submitter:
I do not see these parts used on any model. If they are not going to be in the inventory as sprue, isn't it better to move them to the extra section?
|
From the Additional Information About Regular Items section of the Inventory
Sections: Regular, Extra, Counterpart, and Alternate help page:
https://www.bricklink.com/help.asp?helpID=1562
Parts on Sprues - Complete sprues are included in this section unless
some parts from the sprues are used in minifigures. In that case, the parts from
the sprues that are not used in minifigures are included in this section.
These requests will not be accepted.
Cheers,
Randy
|
I don't find this a good policy for this case.
Cheers,
Reza
|
Opinion noted.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|