Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | StormChaser | Posted: | Feb 10, 2020 13:28 | Subject: | Re: Description standardization note | Viewed: | 37 times | Topic: | Catalog | |
|
| In Catalog, mfav writes:
| It would be good for consistency in the catalog description if all instances
of numbers were either integers or words, not arbitrarily some of each.
|
Agreed. Have added it to the Catalog Roadmap (currently item 29):
https://www.bricklink.com/help.asp?helpID=2476
|
Author: | dmaster.hu | Posted: | Feb 10, 2020 13:21 | Subject: | Inventory Change Request for Set 75954-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3024 Trans-Orange Plate 1 x 1 (Extra)
|
|
Author: | Turez | Posted: | Feb 10, 2020 13:08 | Subject: | Re: Number of Poly Bags in Sets?? | Viewed: | 23 times | Topic: | Inventories | |
|
| In Inventories, mollysmommy writes:
| Is there any SOURCE that lists the NUMBER of poly bags in each set, especially
the older sets when the bags were not numbered? Would like to list a set as
“box opened, bags still sealed” but do not know if I am missing any bags. (Set
#7662 (SW: Trade Federation MTT) in particular this time).
|
For sets from that time period brickshelf is always worth a try.
For example:
http://www.brickshelf.com/cgi-bin/gallery.cgi?f=264352
And another one:
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=4219584
Regards,
Jonas
|
|
Author: | tonnic | Posted: | Feb 9, 2020 18:29 | Subject: | Re: Number of Poly Bags in Sets?? | Viewed: | 44 times | Topic: | Inventories | |
|
| In Inventories, mollysmommy writes:
| Is there any SOURCE that lists the NUMBER of poly bags in each set, especially
the older sets when the bags were not numbered? Would like to list a set as
“box opened, bags still sealed” but do not know if I am missing any bags. (Set
#7662 (SW: Trade Federation MTT) in particular this time).
|
At first try to weight the whole set and check the BL weight.
Otherwise this link may help you too.https://www.worthpoint.com/worthopedia/lego-star-wars-7662-trade-federation-459893715
|
|
Author: | mollysmommy | Posted: | Feb 9, 2020 17:38 | Subject: | Number of Poly Bags in Sets?? | Viewed: | 71 times | Topic: | Inventories | Status: | Open | |
|
| Is there any SOURCE that lists the NUMBER of poly bags in each set, especially
the older sets when the bags were not numbered? Would like to list a set as
“box opened, bags still sealed” but do not know if I am missing any bags. (Set
#7662 (SW: Trade Federation MTT) in particular this time).
|
|
Author: | Turez | Posted: | Feb 9, 2020 16:12 | Subject: | Re: Inventory Change Request for Set 6667-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| In Inventories Requests, Turez writes:
| In Inventories Requests, paulvdb writes:
| Please make changes to the following inventory:
* Add 5 Part 2412a Light Gray Tile, Modified 1 x 2 Grille without Bottom Groove / Lip (match ID 2)
* Change 5 Part Light Gray 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip {Regular to Alternate} {match ID 0 to 2}
Comments from Submitter:
https://forum.brickpirate.net/viewtopic.php?f=18&t=24109 shows 2412a. Set in my personal collection has 2412b so both variants should be in this inventory.
|
Unfortunately it is not clear if the parts used to build the set for that review
are original. They are definitly not new (at least the technic axle has clearly
visible signs of usage) and the user "TOOL" mentioned somewhere in another review
thread that he sometimes uses two copies of a set for the reviews (a new one
to show the sealed bags and a used one to show the parts and the completed model).
Therefore in this case I would not consider the photos as a reliable source.
Regards,
Jonas
|
I don't see any parts in that review that look particularly used. The Technic
axle has visible plastic flow lines in it, but I don't see any wear on it.
|
I have never seen anything like that on a new axle, but you may be right and
then everything is fine.
(Nevertheless I suggest to be careful with pics from that source. Here we can
see the wrong variant
for example:
https://forum.brickpirate.net/viewtopic.php?f=19&t=10447 )
|
|
Author: | randyf | Posted: | Feb 9, 2020 15:45 | Subject: | Re: Inventory Change Request for Set 6667-1 | Viewed: | 32 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| In Inventories Requests, paulvdb writes:
| Please make changes to the following inventory:
* Add 5 Part 2412a Light Gray Tile, Modified 1 x 2 Grille without Bottom Groove / Lip (match ID 2)
* Change 5 Part Light Gray 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip {Regular to Alternate} {match ID 0 to 2}
Comments from Submitter:
https://forum.brickpirate.net/viewtopic.php?f=18&t=24109 shows 2412a. Set in my personal collection has 2412b so both variants should be in this inventory.
|
Unfortunately it is not clear if the parts used to build the set for that review
are original. They are definitly not new (at least the technic axle has clearly
visible signs of usage) and the user "TOOL" mentioned somewhere in another review
thread that he sometimes uses two copies of a set for the reviews (a new one
to show the sealed bags and a used one to show the parts and the completed model).
Therefore in this case I would not consider the photos as a reliable source.
Regards,
Jonas
|
I don't see any parts in that review that look particularly used. The Technic
axle has visible plastic flow lines in it, but I don't see any wear on it.
Cheers,
Randy
|
|
Author: | Turez | Posted: | Feb 9, 2020 15:22 | Subject: | Re: Inventory Change Request for Set 6667-1 | Viewed: | 28 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
| Please make changes to the following inventory:
* Add 5 Part 2412a Light Gray Tile, Modified 1 x 2 Grille without Bottom Groove / Lip (match ID 2)
* Change 5 Part Light Gray 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip {Regular to Alternate} {match ID 0 to 2}
Comments from Submitter:
https://forum.brickpirate.net/viewtopic.php?f=18&t=24109 shows 2412a. Set in my personal collection has 2412b so both variants should be in this inventory.
|
Unfortunately it is not clear if the parts used to build the set for that review
are original. They are definitly not new (at least the technic axle has clearly
visible signs of usage) and the user "TOOL" mentioned somewhere in another review
thread that he sometimes uses two copies of a set for the reviews (a new one
to show the sealed bags and a used one to show the parts and the completed model).
Therefore in this case I would not consider the photos as a reliable source.
Regards,
Jonas
|
|
Author: | randyf | Posted: | Feb 9, 2020 12:47 | Subject: | Re: Inventory Change Request for Set 4758-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 1 Part {Earth Orange to Dark Nougat} 30374 Bar 4L (Lightsaber Blade / Wand)
Comments from Submitter:
Pics to follow
|
Congratulations on being the first person to get a true Dark Nougat part into
an inventory!
|
I scrambled for it.
|
I knew you would.
|
|
Author: | StormChaser | Posted: | Feb 9, 2020 12:41 | Subject: | Re: 3297 smooth or rough surface? | Viewed: | 41 times | Topic: | Catalog | |
|
| In Catalog, Lamondera writes:
| Hello, I have two different versions of the slope 3297, some smooth and some
with a rough surface. Is there a single entry for both?
|
Yes, there is a single entry:
|
|
Author: | FreeStorm | Posted: | Feb 9, 2020 12:40 | Subject: | Re: Description Standardization Note | Viewed: | 40 times | Topic: | Catalog | |
|
| In Catalog, calsbricks writes:
| In Catalog, FreeStorm writes:
| In Catalog, calsbricks writes:
| My preferred option is to let your SQL guy (that is if you have one. Our belief
from the Chicago round table discussion was that none of the developers at that
time had any SQL experience whatsoever) spend 10 minutes producing your query
(9 minutes for understanding the table and 1 minute for writing the query. Once
the results are in front of you it might be possible for your sql guy to write
an update query to do all the updates at once.
This is almost as simple as changing colour names from one to another
|
Of course changes should be made on DB directly with write logs into "change-log
table" as well (to have an history of what is made)
But for that, you need SQL guy (not your nephew) and "real" database.
Please don't play with Excel
|
No fears I am not a programmer and neither is he - we leave it to those that
have a passion for it.
|
How can I say?
The "you" on my messages was not directed to a specific person,it's addressed
to everybody and nobody
|
|
Author: | calsbricks | Posted: | Feb 9, 2020 12:10 | Subject: | Re: Description Standardization Note | Viewed: | 40 times | Topic: | Catalog | |
|
| In Catalog, FreeStorm writes:
| In Catalog, calsbricks writes:
| My preferred option is to let your SQL guy (that is if you have one. Our belief
from the Chicago round table discussion was that none of the developers at that
time had any SQL experience whatsoever) spend 10 minutes producing your query
(9 minutes for understanding the table and 1 minute for writing the query. Once
the results are in front of you it might be possible for your sql guy to write
an update query to do all the updates at once.
This is almost as simple as changing colour names from one to another
|
Of course changes should be made on DB directly with write logs into "change-log
table" as well (to have an history of what is made)
But for that, you need SQL guy (not your nephew) and "real" database.
Please don't play with Excel
|
No fears I am not a programmer and neither is he - we leave it to those that
have a passion for it.
|
|
Author: | FreeStorm | Posted: | Feb 9, 2020 12:01 | Subject: | Re: Description Standardization Note | Viewed: | 35 times | Topic: | Catalog | |
|
| In Catalog, calsbricks writes:
| My preferred option is to let your SQL guy (that is if you have one. Our belief
from the Chicago round table discussion was that none of the developers at that
time had any SQL experience whatsoever) spend 10 minutes producing your query
(9 minutes for understanding the table and 1 minute for writing the query. Once
the results are in front of you it might be possible for your sql guy to write
an update query to do all the updates at once.
This is almost as simple as changing colour names from one to another
|
Of course changes should be made on DB directly with write logs into "change-log
table" as well (to have an history of what is made)
But for that, you need SQL guy (not your nephew) and "real" database.
Please don't play with Excel
|
|
Author: | paulvdb | Posted: | Feb 9, 2020 11:54 | Subject: | Inventory Change Request for Set 6667-1 | Viewed: | 34 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 5 Part 2412a Light Gray Tile, Modified 1 x 2 Grille without Bottom Groove / Lip (match ID 2)
* Change 5 Part Light Gray 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip {Regular to Alternate} {match ID 0 to 2}
Comments from Submitter:
https://forum.brickpirate.net/viewtopic.php?f=18&t=24109 shows 2412a. Set in my personal collection has 2412b so both variants should be in this inventory.
|
|
Author: | calsbricks | Posted: | Feb 9, 2020 11:42 | Subject: | Re: Description Standardization Note | Viewed: | 37 times | Topic: | Catalog | |
|
| In Catalog, calsbricks writes:
| In Catalog, constructibles writes:
| In Catalog, StormChaser writes:
|
And perhaps, when the next problem comes along, examining all of them again.
It almost makes a person think that there must be a better way . . .
|
Export the catalog to txt, and open in Excel. This will give you pretty much
unlimited ability to search. Write an Excel formula to find what you are looking
for. You can even write a formula to create the desired replacement title
if you like, then just copy paste the change back to BL.
Regexp is a little harder to do, but Google “Excel Regexp” and you’ll get some
examples how to create your own function Using Excel VB.
|
Or if you are just not into programming or that technical you could follow the
guidelines set out here for using the advanced filter option in Excel
https://support.microsoft.com/en-gb/help/2720580/using-advanced-filters-in-excel-2010
Good luck with that.
My preferred option is to let your SQL guy (that is if you have one. Our belief
from the Chicago round table discussion was that none of the developers at that
time had any SQL experience whatsoever) spend 10 minutes producing your query
(9 minutes for understanding the table and 1 minute for writing the query. Once
the results are in front of you it might be possible for your sql guy to write
an update query to do all the updates at once.
This is almost as simple as changing colour names from one to another
|
Guess what - as an exercise I just tried this in Brickstok - it works a treat.
Use the filters to suggest the description contains a number or the word for
that number.
The only problem is once it found them all I could not easily mass update them.
The search works great though.
|
|
Author: | calsbricks | Posted: | Feb 9, 2020 10:15 | Subject: | Re: Description Standardization Note | Viewed: | 47 times | Topic: | Catalog | |
|
| In Catalog, constructibles writes:
| In Catalog, StormChaser writes:
|
And perhaps, when the next problem comes along, examining all of them again.
It almost makes a person think that there must be a better way . . .
|
Export the catalog to txt, and open in Excel. This will give you pretty much
unlimited ability to search. Write an Excel formula to find what you are looking
for. You can even write a formula to create the desired replacement title
if you like, then just copy paste the change back to BL.
Regexp is a little harder to do, but Google “Excel Regexp” and you’ll get some
examples how to create your own function Using Excel VB.
|
Or if you are just not into programming or that technical you could follow the
guidelines set out here for using the advanced filter option in Excel
https://support.microsoft.com/en-gb/help/2720580/using-advanced-filters-in-excel-2010
Good luck with that.
My preferred option is to let your SQL guy (that is if you have one. Our belief
from the Chicago round table discussion was that none of the developers at that
time had any SQL experience whatsoever) spend 10 minutes producing your query
(9 minutes for understanding the table and 1 minute for writing the query. Once
the results are in front of you it might be possible for your sql guy to write
an update query to do all the updates at once.
This is almost as simple as changing colour names from one to another
|
|
Author: | constructibles | Posted: | Feb 9, 2020 09:38 | Subject: | Re: Description Standardization Note | Viewed: | 43 times | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
|
And perhaps, when the next problem comes along, examining all of them again.
It almost makes a person think that there must be a better way . . .
|
Export the catalog to txt, and open in Excel. This will give you pretty much
unlimited ability to search. Write an Excel formula to find what you are looking
for. You can even write a formula to create the desired replacement title
if you like, then just copy paste the change back to BL.
Regexp is a little harder to do, but Google “Excel Regexp” and you’ll get some
examples how to create your own function Using Excel VB.
|
|
Author: | evvdu95 | Posted: | Feb 9, 2020 09:35 | Subject: | Inventory Change Request for Set 6667-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4073 Black Plate, Round 1 x 1 (Extra)
* Add 1 Part 4073 Trans-Yellow Plate, Round 1 x 1 (Extra)
Comments from Submitter:
Sealed set review here:
https://forum.brickpirate.net/viewtopic.php?f=18&t=24109
|
|
Author: | axaday | Posted: | Feb 9, 2020 08:35 | Subject: | Re: Inventory Change Request for Set 4758-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 1 Part {Earth Orange to Dark Nougat} 30374 Bar 4L (Lightsaber Blade / Wand)
Comments from Submitter:
Pics to follow
|
Congratulations on being the first person to get a true Dark Nougat part into
an inventory!
|
I scrambled for it.
|
|
Author: | Lamondera | Posted: | Feb 9, 2020 06:53 | Subject: | 3297 smooth or rough surface? | Viewed: | 88 times | Topic: | Catalog | Status: | Open | |
|
| Hello, I have two different versions of the slope 3297, some smooth and some
with a rough surface. Is there a single entry for both?
|
|
Author: | calsbricks | Posted: | Feb 9, 2020 06:29 | Subject: | Re: Description Standardization Note | Viewed: | 41 times | Topic: | Catalog | |
|
| In Catalog, FreeStorm writes:
| For other type than Parts:
(after that I stop spaming)
=========================
BOOK
-------------------------
biocom01
Bionicle # 1 June 2001 Six Heroes One Destiny
biocom01sp1
Bionicle # 1 Six Heroes One Destiny Special San Diego Comic-Con 2003 Edition
biocom01sp2
Bionicle # 1 July 2003 Six Heroes One Destiny - Mini Version
biocom01a
Bionicle # 1 April 2001 Six Heroes One Destiny
9607b4
Set 9607 Activity Booklet 4 - {Machine using Belt and two Gears}
9603b34
Set 9603 Activity Card Application: Simulation 7 - Two Toting
9603b61
Set 9603 Activity Card Application: Invention 4 - One at a Time!
9603b34AU
Set 9603 Activity Card Application: Simulation 7 - Two Up AUS version (118022)
9603b61AU
Set 9603 Activity Card Application: Invention 4 - One at a Time! AUS version
(118122)
=========================
SET
-------------------------
046-1
28 assorted basic brick - white plus 8 flat plates - white plus one 10 x 10 stud
red base plate
=========================
GEAR
-------------------------
9804
Playtable with Two Bins, 2 Seats and Two Building Plates
4495784
Playtable with One Bin, 4 Seats and 4 Building Plates
4646117
Display Assembled Set, Cars 2 Six Main Characters in Plastic Case
=========================
MINIFIG
-------------------------
6453pb004
Duplo Figure, Child Type 2 Boy, Blue Legs, Red Top with White Stripes and Blue
Overalls with One Strap
6453pb003
Duplo Figure, Child Type 2 Boy, Blue Legs, Green Top with Blue Overalls with
one Strap
6453pb021
Duplo Figure, Child Type 2 Girl, Red Legs, White Top with Red Overalls with one
Strap
=========================
ORIGINAL_BOX
-------------------------
046-1
28 assorted basic brick - white plus 8 flat plates - white plus one 10 x 10 stud
red base plate
|
Not spamming - helping the community and the catalogue people who do not have
your abilities.
|
|
Author: | FreeStorm | Posted: | Feb 9, 2020 06:26 | Subject: | Re: Description Standardization Note | Viewed: | 38 times | Topic: | Catalog | |
|
| For other type than Parts:
(after that I stop spaming)
=========================
BOOK
-------------------------
biocom01
Bionicle # 1 June 2001 Six Heroes One Destiny
biocom01sp1
Bionicle # 1 Six Heroes One Destiny Special San Diego Comic-Con 2003 Edition
biocom01sp2
Bionicle # 1 July 2003 Six Heroes One Destiny - Mini Version
biocom01a
Bionicle # 1 April 2001 Six Heroes One Destiny
9607b4
Set 9607 Activity Booklet 4 - {Machine using Belt and two Gears}
9603b34
Set 9603 Activity Card Application: Simulation 7 - Two Toting
9603b61
Set 9603 Activity Card Application: Invention 4 - One at a Time!
9603b34AU
Set 9603 Activity Card Application: Simulation 7 - Two Up AUS version (118022)
9603b61AU
Set 9603 Activity Card Application: Invention 4 - One at a Time! AUS version
(118122)
=========================
SET
-------------------------
046-1
28 assorted basic brick - white plus 8 flat plates - white plus one 10 x 10 stud
red base plate
=========================
GEAR
-------------------------
9804
Playtable with Two Bins, 2 Seats and Two Building Plates
4495784
Playtable with One Bin, 4 Seats and 4 Building Plates
4646117
Display Assembled Set, Cars 2 Six Main Characters in Plastic Case
=========================
MINIFIG
-------------------------
6453pb004
Duplo Figure, Child Type 2 Boy, Blue Legs, Red Top with White Stripes and Blue
Overalls with One Strap
6453pb003
Duplo Figure, Child Type 2 Boy, Blue Legs, Green Top with Blue Overalls with
one Strap
6453pb021
Duplo Figure, Child Type 2 Girl, Red Legs, White Top with Red Overalls with one
Strap
=========================
ORIGINAL_BOX
-------------------------
046-1
28 assorted basic brick - white plus 8 flat plates - white plus one 10 x 10 stud
red base plate
|
|
Author: | calsbricks | Posted: | Feb 9, 2020 06:09 | Subject: | Re: Description Standardization Note | Viewed: | 51 times | Topic: | Catalog | |
|
| In Catalog, FreeStorm writes:
| My search for parts with integers and words numbers in description (of course
dimension like "1 x 2 x 2" is not included on integer number search)
result = 58 parts
You can start with "only" 58 parts and not 100K+
PS: my search is not perfect, but it not the goal
The goal is to reduce the search results for human brain analysis
==================
13252pb01
Windscreen 12 x 6 x 2 with Locking Dual 2 Fingers Hinge with SW Red Five X-wing
Starfighter Pattern (4 Stickers) - Set 10240
14222pb009
Duplo, Brick 1 x 3 x 2 Round Top, Cut Away Sides with Number 1 and Two Stars
in Circle Pattern
|
That's a good start
|
18455
Hinge Brick 2 x 4 Locking with 1 Finger on Top at One End
21557pb01
Minifigure, Headgear Helmet with Respiratory Pipe and SW Ep. 7 TIE Fighter Pilot
First Order with Two White Lines Pattern
21557pb03
Minifigure, Headgear Helmet with Respiratory Pipe and SW Ep. 8 TIE Fighter Pilot
First Order with Three White Lines Pattern
230.1stk01a
Sticker for Set 230-1 - Two Sheet Version - Sheet 1 - (4319)
230.1stk02a
Sticker for Set 230-1 - Two Sheet Version - Sheet 2 - (4096)
232stk01a
Sticker for Set 232 - Two Sheet Version - Sheet 1 - (4424)
232stk02a
Sticker for Set 232 - Two Sheet Version - Sheet 2 - (4102)
2335pb141
Flag 2 x 2 Square with Checkered Pattern on One Side, 2 Black Diagonal Corners
(Sticker) - Set 4982
24902
Cloth Cape with 4 Holes, Slit and Two Long Panels, Large Buildable Figures
2958pb002
Technic, Disk 3 x 3 with 4 Black Sections on One Side and 8 on Reverse Pattern
30350cpb033L
Tile, Modified 2 x 3 with 2 Clips (thick U clips) with 'FR ALL FOR ONE allinol'
Pattern Model Left Side (Sticker) - Set 8678
30350cpb033R
Tile, Modified 2 x 3 with 2 Clips (thick U clips) with 'FR ALL FOR ONE allinol'
Pattern Model Right Side (Sticker) - Set 8678
30360pb03
Cylinder 3 x 6 x 2 2/3 Horizontal with Two Scratched Space Police 3 Badges Pattern
(Stickers) - Set 5972
30414pb01
Brick, Modified 1 x 4 with 4 Studs on One Side with Black and Yellow Danger Stripes
Pattern (Sticker) - Set 7781
30414pb02
Brick, Modified 1 x 4 with 4 Studs on One Side with Train Logo White on Yellow
Background Pattern (Sticker) - Set 7939
3068bpb0112
Tile 2 x 2 with Groove with Grille Five Bar Pattern 1 (Sticker) - Set 7256
3068bpb0135
Tile 2 x 2 with Groove with Grille Five Bar Pattern 2 (Sticker) - Set 7256
3068bpb0141
Tile 2 x 2 with Groove with One White Triangle Pattern 1 (Sticker) - Set 7252
3068bpb0398
Tile 2 x 2 with Groove with One White Triangle Pattern 2 (Sticker) - Set 7252
3068bpb0672
Tile 2 x 2 with Groove with Two Yellow Stripes and Black Number 7 in White Circle
Pattern (Sticker) - Set 8154
3069bpb618
Tile 1 x 2 with Groove with Two Black Boxes with 3 Stripes Pattern (Sticker)
- Set 8681
31000pb28
Primo Brick 1 x 1 with Three Flowers and Number 3 on Opposite Side Pattern
31000pb29
Primo Brick 1 x 1 with Two Snakes and Number 2 on Opposite Side Pattern
32171pb032
Throwbot Disk, Jet / Judge, 3 pips, Jet throwing two disks Pattern
32171pb059
Throwbot Disk, Blaster, 6 pips, Blaster and two 'bots with fire background
Pattern
3298pb011
Slope 33 3 x 2 with Red Number 2 and Two Green Stripes Pattern
36315
Mini Doll, Cape Cloth, 5 Curly Points, One Side Black, One Side Dark Turquoise
41855pb09
Brick, Modified 2 x 2 x 2/3 Two Studs, Lip End with Silver/Black/Red Number 3
Left Half Pattern
41855pb10
Brick, Modified 2 x 2 x 2/3 Two Studs, Lip End with Silver/Black/Red Number 3
Right Half Pattern
42380apb01
Foam, Soccer Target 10 x 9 with One Hole and Number 5 and Soccer Ball (Football)
Pattern (Stickers) - Set 3423
4318
Boat Mast 2 x 2 x 9 2/3 Bar with Slot on Top and 2 Finger Hinge on Two Sides
45399
Garage Door 1 x 12 x 9 with Three Windows, Locking Dual 2 Finger Hinges
45403
Brick, Modified 5 x 12 with Two 1 x 2 Cutouts, 3 Holes on Side
45403c01
Brick, Modified 5 x 12 with Two 1 x 2 Cutouts, 1 Hole and 2 Fixed Rotatable Friction
Pins on Side
47456pb003
Brick, Modified 2 x 3 x 2/3 Two Studs, Wing End with 8 Black Stripes Pattern
(Stickers) - Set 8122
47456pb008L
Brick, Modified 2 x 3 x 2/3 Two Studs, Wing End with Rust and 3 Rivets Pattern
Model Left Side (Sticker) - Set 70143
47456pb008R
Brick, Modified 2 x 3 x 2/3 Two Studs, Wing End with Rust and 4 Rivets Pattern
Model Right Side (Sticker) - Set 70143
47457pb02
Brick, Modified 2 x 2 x 2/3 Two Studs, Curved Slope End with Yellow Triangle
on 3 Bars Pattern
48452cx1pb02
Technic Turntable Large Type 2 with Black Outside Gear Section with Two Silver
Tread Plates Pattern (Stickers) - Set 8292
5005358cdb02
Paper, Cardboard Backdrop for Set 5005358, Card with Two Square Holes and Pictures
of 5 Minifigures
52886
Mini Doll, Cape Cloth, Friends, Tapered with 1 Small Top Hole - Traditional Starched
Fabric, One Side Shiny
58006
Mini Doll, Cape Cloth, Scalloped 3 Points - Traditional Starched Fabric, One
Side Shiny
61484pb004
Windscreen 5 x 6 x 2 Curved Top Canopy with 4 Studs with Fire Logo with Two White
Stripes Pattern (Sticker) - Set 7207
61547pb01
Mini Doll, Cape Cloth, Bell Shaped with 3 Notches, One Side Magenta, One Side
Dark Purple
61667pb01
Mini Doll, Cape Cloth, 2 Long Tails, One Side Glitter
89509
Propeller 1 Blade 14L with Two Pin Holes and Four Axles
90640pb008
Hero Factory Armor with Ball Joint Socket - Size 4 with Three Stripes Pattern
BA013pb04
Stickered Assembly 2 x 4 with Six Ice Creams Pattern (Sticker) - Set 6414 - 2
Tiles 2 x 2
BA087pb01
Stickered Assembly 2 x 2 x 2 with Butterfly and Two Flowers Pattern (Sticker)
- Set 6410 - 1 Brick 1 x 2, 1 Brick 2 x 2
bb0141ac45
Electric, Wire 4.5V with two light gray 2-prong Type 1 connectors, 45 Studs Long
bb0141ac96
Electric, Wire 4.5V with two light gray 2-prong Type 1 connectors, 96 Studs Long
bb0236bc96
Electric, Wire 4.5V with two blue 2-prong Type 2 connectors (with cross-cut pins),
96 Studs Long
duploracer01
Duplo Car Formula One with Yellow Wheels and Yellow Number 1 Pattern
duploracer02
Duplo Car Formula One with Blue Bottom and Yellow Number 2 Pattern
duploracer02a
Duplo Car Formula One with Blue Bottom and Yellow Number 2 Pattern, 1 Stud in
Cab
x277
Hinge 1 x 4 Triangle with Two Pins, Locking 1 Finger
|
|
|
Author: | FreeStorm | Posted: | Feb 9, 2020 06:07 | Subject: | Re: Description Standardization Note | Viewed: | 53 times | Topic: | Catalog | |
|
| My search for parts with integers and words numbers in description (of course
dimension like "1 x 2 x 2" is not included on integer number search)
result = 58 parts
You can start with "only" 58 parts and not 100K+
PS: my search is not perfect, but it not the goal
The goal is to reduce the search results for human brain analysis
==================
13252pb01
Windscreen 12 x 6 x 2 with Locking Dual 2 Fingers Hinge with SW Red Five X-wing
Starfighter Pattern (4 Stickers) - Set 10240
14222pb009
Duplo, Brick 1 x 3 x 2 Round Top, Cut Away Sides with Number 1 and Two Stars
in Circle Pattern
18455
Hinge Brick 2 x 4 Locking with 1 Finger on Top at One End
21557pb01
Minifigure, Headgear Helmet with Respiratory Pipe and SW Ep. 7 TIE Fighter Pilot
First Order with Two White Lines Pattern
21557pb03
Minifigure, Headgear Helmet with Respiratory Pipe and SW Ep. 8 TIE Fighter Pilot
First Order with Three White Lines Pattern
230.1stk01a
Sticker for Set 230-1 - Two Sheet Version - Sheet 1 - (4319)
230.1stk02a
Sticker for Set 230-1 - Two Sheet Version - Sheet 2 - (4096)
232stk01a
Sticker for Set 232 - Two Sheet Version - Sheet 1 - (4424)
232stk02a
Sticker for Set 232 - Two Sheet Version - Sheet 2 - (4102)
2335pb141
Flag 2 x 2 Square with Checkered Pattern on One Side, 2 Black Diagonal Corners
(Sticker) - Set 4982
24902
Cloth Cape with 4 Holes, Slit and Two Long Panels, Large Buildable Figures
2958pb002
Technic, Disk 3 x 3 with 4 Black Sections on One Side and 8 on Reverse Pattern
30350cpb033L
Tile, Modified 2 x 3 with 2 Clips (thick U clips) with 'FR ALL FOR ONE allinol'
Pattern Model Left Side (Sticker) - Set 8678
30350cpb033R
Tile, Modified 2 x 3 with 2 Clips (thick U clips) with 'FR ALL FOR ONE allinol'
Pattern Model Right Side (Sticker) - Set 8678
30360pb03
Cylinder 3 x 6 x 2 2/3 Horizontal with Two Scratched Space Police 3 Badges Pattern
(Stickers) - Set 5972
30414pb01
Brick, Modified 1 x 4 with 4 Studs on One Side with Black and Yellow Danger Stripes
Pattern (Sticker) - Set 7781
30414pb02
Brick, Modified 1 x 4 with 4 Studs on One Side with Train Logo White on Yellow
Background Pattern (Sticker) - Set 7939
3068bpb0112
Tile 2 x 2 with Groove with Grille Five Bar Pattern 1 (Sticker) - Set 7256
3068bpb0135
Tile 2 x 2 with Groove with Grille Five Bar Pattern 2 (Sticker) - Set 7256
3068bpb0141
Tile 2 x 2 with Groove with One White Triangle Pattern 1 (Sticker) - Set 7252
3068bpb0398
Tile 2 x 2 with Groove with One White Triangle Pattern 2 (Sticker) - Set 7252
3068bpb0672
Tile 2 x 2 with Groove with Two Yellow Stripes and Black Number 7 in White Circle
Pattern (Sticker) - Set 8154
3069bpb618
Tile 1 x 2 with Groove with Two Black Boxes with 3 Stripes Pattern (Sticker)
- Set 8681
31000pb28
Primo Brick 1 x 1 with Three Flowers and Number 3 on Opposite Side Pattern
31000pb29
Primo Brick 1 x 1 with Two Snakes and Number 2 on Opposite Side Pattern
32171pb032
Throwbot Disk, Jet / Judge, 3 pips, Jet throwing two disks Pattern
32171pb059
Throwbot Disk, Blaster, 6 pips, Blaster and two 'bots with fire background
Pattern
3298pb011
Slope 33 3 x 2 with Red Number 2 and Two Green Stripes Pattern
36315
Mini Doll, Cape Cloth, 5 Curly Points, One Side Black, One Side Dark Turquoise
41855pb09
Brick, Modified 2 x 2 x 2/3 Two Studs, Lip End with Silver/Black/Red Number 3
Left Half Pattern
41855pb10
Brick, Modified 2 x 2 x 2/3 Two Studs, Lip End with Silver/Black/Red Number 3
Right Half Pattern
42380apb01
Foam, Soccer Target 10 x 9 with One Hole and Number 5 and Soccer Ball (Football)
Pattern (Stickers) - Set 3423
4318
Boat Mast 2 x 2 x 9 2/3 Bar with Slot on Top and 2 Finger Hinge on Two Sides
45399
Garage Door 1 x 12 x 9 with Three Windows, Locking Dual 2 Finger Hinges
45403
Brick, Modified 5 x 12 with Two 1 x 2 Cutouts, 3 Holes on Side
45403c01
Brick, Modified 5 x 12 with Two 1 x 2 Cutouts, 1 Hole and 2 Fixed Rotatable Friction
Pins on Side
47456pb003
Brick, Modified 2 x 3 x 2/3 Two Studs, Wing End with 8 Black Stripes Pattern
(Stickers) - Set 8122
47456pb008L
Brick, Modified 2 x 3 x 2/3 Two Studs, Wing End with Rust and 3 Rivets Pattern
Model Left Side (Sticker) - Set 70143
47456pb008R
Brick, Modified 2 x 3 x 2/3 Two Studs, Wing End with Rust and 4 Rivets Pattern
Model Right Side (Sticker) - Set 70143
47457pb02
Brick, Modified 2 x 2 x 2/3 Two Studs, Curved Slope End with Yellow Triangle
on 3 Bars Pattern
48452cx1pb02
Technic Turntable Large Type 2 with Black Outside Gear Section with Two Silver
Tread Plates Pattern (Stickers) - Set 8292
5005358cdb02
Paper, Cardboard Backdrop for Set 5005358, Card with Two Square Holes and Pictures
of 5 Minifigures
52886
Mini Doll, Cape Cloth, Friends, Tapered with 1 Small Top Hole - Traditional Starched
Fabric, One Side Shiny
58006
Mini Doll, Cape Cloth, Scalloped 3 Points - Traditional Starched Fabric, One
Side Shiny
61484pb004
Windscreen 5 x 6 x 2 Curved Top Canopy with 4 Studs with Fire Logo with Two White
Stripes Pattern (Sticker) - Set 7207
61547pb01
Mini Doll, Cape Cloth, Bell Shaped with 3 Notches, One Side Magenta, One Side
Dark Purple
61667pb01
Mini Doll, Cape Cloth, 2 Long Tails, One Side Glitter
89509
Propeller 1 Blade 14L with Two Pin Holes and Four Axles
90640pb008
Hero Factory Armor with Ball Joint Socket - Size 4 with Three Stripes Pattern
BA013pb04
Stickered Assembly 2 x 4 with Six Ice Creams Pattern (Sticker) - Set 6414 - 2
Tiles 2 x 2
BA087pb01
Stickered Assembly 2 x 2 x 2 with Butterfly and Two Flowers Pattern (Sticker)
- Set 6410 - 1 Brick 1 x 2, 1 Brick 2 x 2
bb0141ac45
Electric, Wire 4.5V with two light gray 2-prong Type 1 connectors, 45 Studs Long
bb0141ac96
Electric, Wire 4.5V with two light gray 2-prong Type 1 connectors, 96 Studs Long
bb0236bc96
Electric, Wire 4.5V with two blue 2-prong Type 2 connectors (with cross-cut pins),
96 Studs Long
duploracer01
Duplo Car Formula One with Yellow Wheels and Yellow Number 1 Pattern
duploracer02
Duplo Car Formula One with Blue Bottom and Yellow Number 2 Pattern
duploracer02a
Duplo Car Formula One with Blue Bottom and Yellow Number 2 Pattern, 1 Stud in
Cab
x277
Hinge 1 x 4 Triangle with Two Pins, Locking 1 Finger
|
|
Author: | BrickCompulsion | Posted: | Feb 9, 2020 04:58 | Subject: | Re: Description standardization note | Viewed: | 45 times | Topic: | Catalog | |
|
| I totally support this change
Consistency is key
Maybe search and change all you can find and then put it out there on here for
messages about items missed. That’s if the sql person is on holiday or unavailable
|
|
Author: | calsbricks | Posted: | Feb 9, 2020 04:49 | Subject: | Re: Description Standardization Note | Viewed: | 44 times | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| In Catalog, mfav writes:
| It would be good for consistency in the catalog description if all instances
of numbers were either integers or words, not arbitrarily some of each.
|
I have noticed this before and definitely agree it needs to be worked on. The
problem is (and I'm starting to understand the rearranging the chairs thing)
there are too many problems.
In the case of this problem, you can't even find the problem because you
can't search for it. So it would involve examining every single catalog
entry. All 100K+ of them.
And perhaps, when the next problem comes along, examining all of them again.
It almost makes a person think that there must be a better way . .
|
The answer is really quite simple - talk to a SQL person and they will advise
you how to organise your query to find precisely what you want. It isn't
rocket science. .
|
|
Author: | FreeStorm | Posted: | Feb 9, 2020 03:59 | Subject: | Re: Description Standardization Note | Viewed: | 46 times | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| In the case of this problem, you can't even find the problem because you
can't search for it. So it would involve examining every single catalog
entry. All 100K+ of them.
|
What do you want to find?
Something like this?
"* three *" = 153 results
"* 3 *" = 6675 results
"* three *" AND "* 3 *" = 16 results
As example, last search find:
"Technic, Panel Car Spoiler 3 x 8 with Three Holes and Black and Yellow Danger
Stripes and Mud Pattern (Stickers) - Set 7968"
"Primo Brick 1 x 1 with Three Flowers and Number 3 on Opposite Side Pattern"
Of course,I made query to find only for "three" and "3" on same description,
but with a regexp it should be simple to spot every "word digit" with "digit"
on same description like "blah with two legs and 1 arm"
Some other incoherence (digit 3 should be between '' when you have pattern
after):
"*number 3 *pattern*" = 22 result
"*number '3' *pattern*" = 3 result
If you know what you want to find, it should be easy to make a search query,
to spot the majority of incoherence.
-Fred
|
|
Author: | SezaR | Posted: | Feb 9, 2020 03:44 | Subject: | Re: Inventory Change Request for Set 6074-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Change 1 Part Blue 4502a Minifigure, Plume Feather Small {Regular to Extra}
* Change 1 Part Red 4502a Minifigure, Plume Feather Small {Regular to Extra}
Comments from Submitter:
I do not see these parts used on any model. If they are not going to be in the inventory as sprue, isn't it better to move them to the extra section?
|
From the Additional Information About Regular Items section of the Inventory
Sections: Regular, Extra, Counterpart, and Alternate help page:
https://www.bricklink.com/help.asp?helpID=1562
Parts on Sprues - Complete sprues are included in this section unless
some parts from the sprues are used in minifigures. In that case, the parts from
the sprues that are not used in minifigures are included in this section.
These requests will not be accepted.
Cheers,
Randy
|
I don't find this a good policy for this case.
Cheers,
Reza
|
All parts used for main or any other model of the set go to the regular section.
This is a good policy for regular section. Any other part that happened to come
with the set, not used in any model, directly or indirectly, is better to be
in the extra section.
I see we will have anyway some inconsistency with parts coming with sprues, no
matter which policy is chosen.
|
|
Author: | StormChaser | Posted: | Feb 9, 2020 03:29 | Subject: | Re: Description Standardization Note | Viewed: | 60 times | Topic: | Catalog | |
|
| In Catalog, mfav writes:
| It would be good for consistency in the catalog description if all instances
of numbers were either integers or words, not arbitrarily some of each.
|
I have noticed this before and definitely agree it needs to be worked on. The
problem is (and I'm starting to understand the rearranging the chairs thing)
there are too many problems.
In the case of this problem, you can't even find the problem because you
can't search for it. So it would involve examining every single catalog
entry. All 100K+ of them.
And perhaps, when the next problem comes along, examining all of them again.
It almost makes a person think that there must be a better way . . .
|
|
Author: | randyf | Posted: | Feb 9, 2020 03:22 | Subject: | Re: Inventory Change Request for Set 6074-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Change 1 Part Blue 4502a Minifigure, Plume Feather Small {Regular to Extra}
* Change 1 Part Red 4502a Minifigure, Plume Feather Small {Regular to Extra}
Comments from Submitter:
I do not see these parts used on any model. If they are not going to be in the inventory as sprue, isn't it better to move them to the extra section?
|
From the Additional Information About Regular Items section of the Inventory
Sections: Regular, Extra, Counterpart, and Alternate help page:
https://www.bricklink.com/help.asp?helpID=1562
Parts on Sprues - Complete sprues are included in this section unless
some parts from the sprues are used in minifigures. In that case, the parts from
the sprues that are not used in minifigures are included in this section.
These requests will not be accepted.
Cheers,
Randy
|
I don't find this a good policy for this case.
Cheers,
Reza
|
Opinion noted.
|
|
Author: | hpoort | Posted: | Feb 9, 2020 03:00 | Subject: | Re: Description standardization note | Viewed: | 48 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| In Catalog, mfav writes:
| It would be good for consistency in the catalog description if all instances
of numbers were either integers or words, not arbitrarily some of each.
So:
Three eyeballs, Three earlobes
or
3 eyeballs, 3 earlobes
not
Three eyeballs, 3 earlobes
...that kind of thing.
There are pros and cons for each option. Please investigate how the search mechanism
works to see which option yields better results.
|
Unfortunately, single digits are thrown out of many of the search results. But
I think in general one would find more numerals in item names than the words
spelled out simply because it makes the name shorter.
|
Please drop the keyword exclusion altogether.
It does not make sense to make use of a full text English language keyword exclusion
list, when the contents of the database is actually not normal full text English,
but a specific dialect: Bricklink English (EN-BL) in which it makes more sense
to search for keywords like 'with' and 'without' and for single
digits. It should be easy to adjust the database configuration. No programming
involved.
Hans-Peter
|
|
Author: | SezaR | Posted: | Feb 9, 2020 02:52 | Subject: | Re: Inventory Change Request for Set 6074-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Change 1 Part Blue 4502a Minifigure, Plume Feather Small {Regular to Extra}
* Change 1 Part Red 4502a Minifigure, Plume Feather Small {Regular to Extra}
Comments from Submitter:
I do not see these parts used on any model. If they are not going to be in the inventory as sprue, isn't it better to move them to the extra section?
|
From the Additional Information About Regular Items section of the Inventory
Sections: Regular, Extra, Counterpart, and Alternate help page:
https://www.bricklink.com/help.asp?helpID=1562
Parts on Sprues - Complete sprues are included in this section unless
some parts from the sprues are used in minifigures. In that case, the parts from
the sprues that are not used in minifigures are included in this section.
These requests will not be accepted.
Cheers,
Randy
|
I don't find this a good policy for this case.
Cheers,
Reza
|
|
Author: | randyf | Posted: | Feb 9, 2020 02:46 | Subject: | Re: Inventory Change Request for Set 6074-1 | Viewed: | 33 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Change 1 Part Blue 4502a Minifigure, Plume Feather Small {Regular to Extra}
* Change 1 Part Red 4502a Minifigure, Plume Feather Small {Regular to Extra}
Comments from Submitter:
I do not see these parts used on any model. If they are not going to be in the inventory as sprue, isn't it better to move them to the extra section?
|
From the Additional Information About Regular Items section of the Inventory
Sections: Regular, Extra, Counterpart, and Alternate help page:
https://www.bricklink.com/help.asp?helpID=1562
Parts on Sprues - Complete sprues are included in this section unless
some parts from the sprues are used in minifigures. In that case, the parts from
the sprues that are not used in minifigures are included in this section.
These requests will not be accepted.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Feb 9, 2020 02:38 | Subject: | Re: Inventory Change Request for Set 4758-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 1 Part {Earth Orange to Dark Nougat} 30374 Bar 4L (Lightsaber Blade / Wand)
Comments from Submitter:
Pics to follow
|
Congratulations on being the first person to get a true Dark Nougat part into
an inventory!
|
|
Author: | SezaR | Posted: | Feb 9, 2020 01:35 | Subject: | Re: Inventory Change Request for Set 6074-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SylvainLS writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Change 1 Part Blue 4502a Minifigure, Plume Feather Small {Regular to Extra}
* Change 1 Part Red 4502a Minifigure, Plume Feather Small {Regular to Extra}
Comments from Submitter:
I do not see these parts used on any model. If they are not going to be in the inventory as sprue, isn't it better to move them to the extra section?
|
Look for posts from 62bricks and the admins’ answers….
|
Sylvain,
Comme tu as lu leur opinion, tu n'as pas vu que j'ai meme participe aux
discussions?
|
|
Author: | axaday | Posted: | Feb 8, 2020 23:39 | Subject: | Re: Inventory Change Request for Set 4758-1 | Viewed: | 32 times | Topic: | Inventories Requests | |
|
| | I couldn't say without seeing the setup. It could be a diffuser, but it needs
to be positioned correctly. I'm seeing hard white highlights on the tiger
figure which suggests hard direct light. Also seems the light is coming from
the sides, kind of backlit.
|
I'm going to let you help me.
| Phones are a pain because of the wide angle lens. You end up always having to
be between the light source and the object if you want to get a closeup. There
may be telephoto clip-on lenses that might help. Also a tripod/clamp/mount.
|
I have a Moment case and a Moment telephoto lens, but I barely use it because
it won't work for me. But I have a cheap, cheap on that does and the Moment
case holds it at the right position.
| Are you doing any postproduction with Photoshop or Gimp or something?
|
Yes, Photoshop Elements.
| By the way, did I mention: The page cannot be displayed because an internal server
error has occurred.
|
I don't know if you did this time, but you have mentioned it before.
|
|
Author: | axaday | Posted: | Feb 8, 2020 23:36 | Subject: | Inventory Change Request for Set 4758-1 | Viewed: | 41 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4032b Black Plate, Round 2 x 2 with Axle Hole - X Opening (Alternate) (match ID 1)
* Add 1 Part 32064b Light Bluish Gray Technic, Brick 1 x 2 with Axle Hole - X Opening (Alternate) (match ID 2)
* Add 1 Part 4032b Yellow Plate, Round 2 x 2 with Axle Hole - X Opening (Alternate) (match ID 3)
* Change 2 Part Reddish Brown {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 2 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301a Hinge Plate 1 x 2 Locking with 1 Finger On End with Bottom Groove}
* Change 1 Part Black 4032 Plate, Round 2 x 2 with Axle Hole {match ID 0 to 1}
* Change 1 Part Light Bluish Gray 32064 Technic, Brick 1 x 2 with Axle Hole {match ID 0 to 2}
* Change 1 Part Yellow 4032 Plate, Round 2 x 2 with Axle Hole {match ID 0 to 3}
Comments from Submitter:
I apologize for no pictures. I was so excited about the dark nougat bar that I forgot I had other undetermined pieces. When I set out to sort out the set I dumped all the bags and then started to find variants when it was too late.
|
|
Author: | mfav | Posted: | Feb 8, 2020 23:00 | Subject: | Re: Inventory Change Request for Set 4758-1 | Viewed: | 39 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| In Inventories Requests, mfav writes:
| mfav thinks he'd like to see a wide shot of whateverthehell it is you're
doing for your "studio setup"...background, lights, camera, etc.
|
1 level up from cheapest tent on Amazon, ultra-bright LED bulbs, iPhone XR
| mfav thinks you've got some awesome light temperature going on there, but
could use a diffuser
|
Isn't the tent a diffuser?
|
I couldn't say without seeing the setup. It could be a diffuser, but it needs
to be positioned correctly. I'm seeing hard white highlights on the tiger
figure which suggests hard direct light. Also seems the light is coming from
the sides, kind of backlit.
Phones are a pain because of the wide angle lens. You end up always having to
be between the light source and the object if you want to get a closeup. There
may be telephoto clip-on lenses that might help. Also a tripod/clamp/mount.
Also look into the Neural Cam app for iPhone.
Are you doing any postproduction with Photoshop or Gimp or something?
By the way, did I mention: The page cannot be displayed because an internal server
error has occurred.
|
|
Author: | mfav | Posted: | Feb 8, 2020 22:49 | Subject: | Re: Description standardization note | Viewed: | 63 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| Unfortunately, single digits are thrown out of many of the search results.
|
Aren't you the fella to talk to to get that changed, Mister Site Manager?
| But I think in general one would find more numerals in item names than the words
spelled out simply because it makes the name shorter.
|
While that is undoubtedly true, it's not particularly helpful in any way.
If you search, say, legs assemblies...
search for "three" you get two results
search for "3" you get: The following keywords were excluded from your search:
3
...however there are 13 entries containing "3"
Isn't the point of StormBluser's standardization plan to fix this stuff?
To paraphrase the StormBluser: why name something like this when 75% of the search
words are invalid?
Again, I'll make the point you need to distinguish between identification
and discovery. The identification of a thing is irrelevant if it can't be
discovered. People use the search box to find things, they don't browse 180,000
individual items looking for "3". Hope you get my drift.
Aren't you the number one proponent of making the catalog useful? Let's
figure out a way to make it useful.
|
|
Author: | Brixalotl | Posted: | Feb 8, 2020 22:38 | Subject: | Inventory Change Request for Set 76134-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 44302b Dark Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove (Alternate) (match ID 1)
* Change 2 Part Dark Bluish Gray 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove {match ID 0 to 1}
Comments from Submitter:
found both variants during part out, thanks
|
|
Author: | Leftoverbricks | Posted: | Feb 8, 2020 22:24 | Subject: | Re: Sticker # When adding Items | Viewed: | 35 times | Topic: | Catalog | |
|
| In Catalog, OmnipresentECA writes:
| I have come across a few tiles with stickers that are not in the catalog.
, nor in their set inventory.
How do I go about determining the Sticker # when Adding to the catalog.
For example one is a 87079pb###, how do I determine the last few digits?
|
Search for 87079pb*
You will get 725 results. The next ‘free’ number should be 726.
|
|
Author: | RecycledBrick | Posted: | Feb 8, 2020 22:13 | Subject: | Inventory Change Request for Set 70356-1 | Viewed: | 31 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 87079pb666 Dark Bluish Gray Tile 2 x 4 with Dark Purple Stone Pattern (Sticker) - Set 70356 (Counterpart)
* Add 1 Part 3039pb130 Dark Bluish Gray Slope 45 2 x 2 with Stone and Energy Pattern (Sticker) - Set 70356 (Counterpart)
* Add 1 Part 15068pb223 Dark Bluish Gray Slope, Curved 2 x 2 with Stone and Energy Pattern (Sticker) - Set 70356 (Counterpart)
* Add 1 Part 24309pb015 Black Slope, Curved 3 x 2 with Stone and Energy Pattern (Sticker) - Set 70356 (Counterpart)
* Add 1 Part 22387pb003 Black Panel 2 x 6 x 6 With Window Slot with Stone and Energy Pattern (Stickers) - Set 70356 (Counterpart)
* Add 1 Part 60581pb131 Black Panel 1 x 4 x 3 with Side Supports - Hollow Studs with Stone and Energy Pattern (Sticker) - Set 70356 (Counterpart)
* Add 1 Part 87544pb056L Black Panel 1 x 2 x 3 with Side Supports - Hollow Studs with Stone and Energy Pattern Model Left Side (Sticker) - Set 70356 (Counterpart)
* Add 1 Part 87544pb056R Black Panel 1 x 2 x 3 with Side Supports - Hollow Studs with Stone and Energy Pattern Model Right Side (Sticker) - Set 70356 (Counterpart)
|
|
Author: | axaday | Posted: | Feb 8, 2020 21:41 | Subject: | Re: Inventory Change Request for Set 4758-1 | Viewed: | 39 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, mfav writes:
| mfav thinks he'd like to see a wide shot of whateverthehell it is you're
doing for your "studio setup"...background, lights, camera, etc.
|
1 level up from cheapest tent on Amazon, ultra-bright LED bulbs, iPhone XR
| mfav thinks you've got some awesome light temperature going on there, but
could use a diffuser
|
Isn't the tent a diffuser?
|
|
|
Author: | mfav | Posted: | Feb 8, 2020 21:08 | Subject: | Description standardization note | Viewed: | 168 times | Topic: | Catalog | Status: | Open | |
|
| It would be good for consistency in the catalog description if all instances
of numbers were either integers or words, not arbitrarily some of each.
So:
Three eyeballs, Three earlobes
or
3 eyeballs, 3 earlobes
not
Three eyeballs, 3 earlobes
...that kind of thing.
There are pros and cons for each option. Please investigate how the search mechanism
works to see which option yields better results.
|
|
Author: | waltzking | Posted: | Feb 8, 2020 19:49 | Subject: | Inventory Change Request for Set 60270-1 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 30258pb018 Black Road Sign Clip-on 2 x 2 Square with Curved Blue Lines and Small Black Squares Pattern (Computer Screen)
* Add 1 Part 15210pb002 Black Road Sign Clip-On 2 x 2 Square Open O Clip with Curved Blue Lines and Small Black Squares Pattern (Computer Screen)
|
|
Author: | mfav | Posted: | Feb 8, 2020 18:18 | Subject: | Re: Inventory Change Request for Set 4758-1 | Viewed: | 42 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| mfav is welcomed to steel these pics.
|
mfav thinks he's not interested in the pics once they've gone through
the bricklink imagemangler
mfav thinks he'd like to see a wide shot of whateverthehell it is you're
doing for your "studio setup"...background, lights, camera, etc.
mfav thinks you've got some awesome light temperature going on there, but
could use a diffuser
mfav also thinks a bunch of other stuff, but is going to stop thinking now
|
|
Author: | axaday | Posted: | Feb 8, 2020 17:42 | Subject: | Re: Inventory Change Request for Set 4758-1 | Viewed: | 39 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 1 Part {Earth Orange to Dark Nougat} 30374 Bar 4L (Lightsaber Blade / Wand)
Comments from Submitter:
Pics to follow
|
mfav is welcomed to steel these pics.
|
|
Author: | axaday | Posted: | Feb 8, 2020 17:41 | Subject: | Inventory Change Request for Set 4758-1 | Viewed: | 49 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part {Earth Orange to Dark Nougat} 30374 Bar 4L (Lightsaber Blade / Wand)
Comments from Submitter:
Pics to follow
|
Author: | OmnipresentECA | Posted: | Feb 8, 2020 15:30 | Subject: | Sticker # When adding Items | Viewed: | 52 times | Topic: | Catalog | Status: | Open | |
|
| I have come across a few tiles with stickers that are not in the catalog.
, nor in their set inventory.
How do I go about determining the Sticker # when Adding to the catalog.
For example one is a 87079pb###, how do I determine the last few digits?
|
|
Author: | dcarmine | Posted: | Feb 8, 2020 14:53 | Subject: | Re: February Roadmap Project: Old and New | Viewed: | 53 times | Topic: | Catalog | |
|
| In Catalog, axaday writes:
| In Catalog, dcarmine writes:
| According to the new standard for "difference types" the difference has to be
related to the way a part functions, not just cosmetic differences. So with
that rule, there would be only one entry for this hat.
|
I think there you are talking about run change things. Minor adjustments to
a mold to use less plastic or something that don't change its function at
all don't make "a difference". But a change of design on a hat makes it
a new hat.
|
Ok good to know.
Donna
|
|
Author: | paulvdb | Posted: | Feb 8, 2020 14:39 | Subject: | Re: Inventory Change Request for Set 9463-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, WilliamRaine writes:
| Please make changes to the following inventory:
* Delete 3 Part 3794 Dark Red Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) (match ID 2)
* Delete 1 Part 3794 Light Bluish Gray Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) (match ID 3)
* Add 1 Part 3794a Light Bluish Gray Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper) (match ID 3)
* Change 3 Part Dark Red 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {Alternate to Regular}
Comments from Submitter:
Source: Sealed Set Contents, cleaning up undetermined types.
|
The dark red 3794 should not be deleted. They should be changed to 3794a. See
https://www.bricklink.com/messageThread.asp?ID=263523
|
|
Author: | randyf | Posted: | Feb 8, 2020 14:39 | Subject: | Re: Questions about Unikitty / Counterparts | Viewed: | 32 times | Topic: | Catalog | |
|
| In Catalog, mjwest83 writes:
| In Catalog, Admin_Russell writes:
| But for all other sets, we've decided one entry is enough. To allow more
entries like this would create a precedent with huge implications. So your pending
entries will be rejected in a few days.
|
In regards to the two Unikitties in set , if you only want to list
one of them, fine. But which one? The decision is totally arbitrary. The box
itself is effectively two separate presentations. It doesn't have a front
and back, so much as two fronts. If you look at the instructions, they do NOT
have numbers. Instead it has two equal, independent instruction books. Really,
this set is two completely independent sets that happen to use the same parts.
As such, choosing just one of those Unikitties is a completely arbitrary decision,
and it can be argued that either one should be the primary.
|
The box, instructions, and LEGO set description are definitive about the situation,
although it may not look that way at first.
(1) LEGO lists the first instruction manual as the one used to build the house.
(2) The set is named "Emmet's Dream House/Rescue Rocket!", so it is clear
which model is considered the main model and which is considered the alternate
model.
(3) The set description from LEGO.com says "This 2-in-1 construction toy features
Emmet’s home which can be rebuilt into a rocket."
All of the key information is there to determine that the main model is the house
and the alternate model is the rescue rocket. Based on that determination, the
instruction manual for the house takes precedence.
| This is NOT a case where there is an obvious primary build of the minifigure,
with a side picture showing an alternative build. (Like a character that has
both a helmet and hair, where one is the primary build, and the other is an alternative
for play purposes.) No, this is outright two separate minifigures that just happen
to use common parts. This is a very different case than just about any other
situation.
|
It cannot be two separate minifigures, because there is only one tail for Unikitty
in the set, as well as only one set of ears, one horn, and one headband plate.
Therefore, we have to make a decision about what minifigure gets added to the
set for now. That minifigure was determined based on the above data that I listed.
In the future, when the "Minifigs:" section of an inventory will hopefully just
be an "Assemblies:" section which includes other assembled counterparts, two
different assemblies of parts can be added. However, we are nowhere close to
that.
The admins can discuss this situation some more, but I don't believe we will
come to a different decision at this time.
Cheers,
Randy
|
|
Author: | paulvdb | Posted: | Feb 8, 2020 14:39 | Subject: | Re: Inventory Change Request for Set 9463-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
| Please make changes to the following inventory:
* Change 3 Part Dark Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
See https://youtu.be/wV8s1Rckao0
|
Screenshot showing 3794a:
|
|
|
Author: | paulvdb | Posted: | Feb 8, 2020 14:38 | Subject: | Inventory Change Request for Set 9463-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Dark Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
See https://youtu.be/wV8s1Rckao0
|
|
Author: | mjwest83 | Posted: | Feb 8, 2020 11:31 | Subject: | Re: Questions about Unikitty / Counterparts | Viewed: | 36 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| But for all other sets, we've decided one entry is enough. To allow more
entries like this would create a precedent with huge implications. So your pending
entries will be rejected in a few days.
|
In regards to the two Unikitties in set , if you only want to list
one of them, fine. But which one? The decision is totally arbitrary. The box
itself is effectively two separate presentations. It doesn't have a front
and back, so much as two fronts. If you look at the instructions, they do NOT
have numbers. Instead it has two equal, independent instruction books. Really,
this set is two completely independent sets that happen to use the same parts.
As such, choosing just one of those Unikitties is a completely arbitrary decision,
and it can be argued that either one should be the primary.
This is NOT a case where there is an obvious primary build of the minifigure,
with a side picture showing an alternative build. (Like a character that has
both a helmet and hair, where one is the primary build, and the other is an alternative
for play purposes.) No, this is outright two separate minifigures that just happen
to use common parts. This is a very different case than just about any other
situation.
Also, if they can't be listed as counter-parts, how are they supposed to
be sold. It is flat out the case that this minifigure will be sold as a minifigure,
whether it has a specific listing or not. There are only two ways to do so: one
is as a custom figure (which is pointless) and the other is as an incomplete
set (which is what will be done). When listed as an incomplete set, this pollutes
the averages on which so much stuff is based. When it is such a small part of
the set, that can have a very over-sized impact on those averages. By allowing
the counterpart figure, you avoid those issues.
|
|
Author: | L.tide | Posted: | Feb 8, 2020 10:47 | Subject: | Inventory Change Request for Set 10715-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 34337 White Wheel 8mm D. x 6mm with Slot (Extra)
Comments from Submitter:
last one extra piece to have it complete
|
|
Author: | SylvainLS | Posted: | Feb 8, 2020 03:29 | Subject: | Re: Inventory Change Request for Set 6074-1 | Viewed: | 33 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Change 1 Part Blue 4502a Minifigure, Plume Feather Small {Regular to Extra}
* Change 1 Part Red 4502a Minifigure, Plume Feather Small {Regular to Extra}
Comments from Submitter:
I do not see these parts used on any model. If they are not going to be in the inventory as sprue, isn't it better to move them to the extra section?
|
Look for posts from 62bricks and the admins’ answers….
|
|
Author: | SezaR | Posted: | Feb 8, 2020 02:55 | Subject: | Inventory Change Request for Set 6074-1 | Viewed: | 38 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Blue 4502a Minifigure, Plume Feather Small {Regular to Extra}
* Change 1 Part Red 4502a Minifigure, Plume Feather Small {Regular to Extra}
Comments from Submitter:
I do not see these parts used on any model. If they are not going to be in the inventory as sprue, isn't it better to move them to the extra section?
|
|
Author: | StormChaser | Posted: | Feb 8, 2020 02:39 | Subject: | Re: February Roadmap Project: Old and New | Viewed: | 58 times | Topic: | Catalog | |
|
| In Catalog, randyf writes:
| I suggest adding names and titles that have "Type 1", "Type 2", etc. in them
to the project. Those terms are useless.
|
I completely agree.
But I also know from experience that bundling too many things in together is
not conducive to finishing things. So I may make this a separate project. One
way or the other, it is needed.
|
|
Author: | grimsbricksuk | Posted: | Feb 8, 2020 00:48 | Subject: | Inventory Change Request for Gear DScaseSW2 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Minifig {sw0201 Clone Trooper Clone Wars to sw1090 Clone Trooper Clone Wars - Anakin Head (DScaseSW2)}
|
|
Author: | axaday | Posted: | Feb 7, 2020 21:26 | Subject: | Re: February Roadmap Project: Old and New | Viewed: | 41 times | Topic: | Catalog | |
|
| In Catalog, dcarmine writes:
| According to the new standard for "difference types" the difference has to be
related to the way a part functions, not just cosmetic differences. So with
that rule, there would be only one entry for this hat.
|
I think there you are talking about run change things. Minor adjustments to
a mold to use less plastic or something that don't change its function at
all don't make "a difference". But a change of design on a hat makes it
a new hat.
|
|
Author: | mfav | Posted: | Feb 7, 2020 21:10 | Subject: | Re: February Roadmap Project: Old and New | Viewed: | 43 times | Topic: | Catalog | |
|
| In Catalog, dcarmine writes:
| I have about 98% of the Harry Potter sets if you want to use that for year of
change or verification on that hat. I'm willing to look at them and report
what I find.
|
I'm content to let the mad geniuses of catalog control sort out the catalog.
I'm just documenting the differences I can find in the handful of hats I
have.
Regardless of whatever else, the presence of the prong on some hats and the absence
on others I would think constitutes a different mold, and the supercollectors
may want to note the differences. But, again, I'm content to let the catmins
sort all that out.
If you want to get really crazy, the undersides of the brims also exhibit differences
under the magnifying glass. Some are smooth, some have a pebbled inner and outer
ring, some have an inner ring with parallel striations instead of pebbling, a
couple have a narrow band of striations in an otherwise smooth inner ring. The
subtleties are kind of endless.
For whatever it's worth, though, mine are:
Black 90460: fine pebbling overall
Black: smooth cone, pebbled brim, with prong,
Black: slightly pebbled cone, pebbled brim, with prong,
Blue, Purple, Green: slightly pebbled cone, definitely pebbled brim, with prong
Dark Green, Dark Green with dragon decoration: definitely pebbled cone and brim,
no prong
Tan: slightly pebbled cone, definitely pebbled brim, no prong
Light Purple: cone too beat up to tell if it's smooth or slightly pebbled,
definitely pebbled brim, with prong
The dark green ones and the 90460 are pretty much pristine; the others are old
and worn. Your mileage may vary.
My sample size is small, so additional data is probably warranted if the admins
want to try to make sense of it.
I just updated the hats page with closeups. Don't know if you saw that version
or the earlier no-closeups version.
My opinion otherwise though is that using renders instead of photographs for
the parts is misleading for the collector.
Did I mention: The page cannot be displayed because an internal server error
has occurred.
|
|
Author: | dcarmine | Posted: | Feb 7, 2020 19:55 | Subject: | Re: February Roadmap Project: Old and New | Viewed: | 50 times | Topic: | Catalog | |
|
| In Catalog, mfav writes:
According to the new standard for "difference types" the difference has to be
related to the way a part functions, not just cosmetic differences. So with
that rule, there would be only one entry for this hat.
I don't know if that rule applies to minifig categories, but I guess it depends
on how far down the "collector's details" rabbit hole you want to go. .
I have about 98% of the Harry Potter sets if you want to use that for year of
change or verification on that hat. I'm willing to look at them and report
what I find.
HTH
Donna
|
|
Author: | axaday | Posted: | Feb 7, 2020 19:10 | Subject: | Re: February Roadmap Project: Old and New | Viewed: | 44 times | Topic: | Catalog | |
|
| I reformatted a BUNCH of road signs with type 1 and type 2 bases. They should
perhaps be (xxxx / xxxx) like tire combinations?
In Catalog, randyf writes:
| I suggest adding names and titles that have "Type 1", "Type 2", etc. in them
to the project. Those terms are useless.
Cheers,
Randy
In Catalog, StormChaser writes:
| We are finally making serious headway with the catalog backlog. The catalog
change requests queue is cleared out.
In the spirit of trying to ensure that the Catalog Roadmap is not just something
to look at, I am continuing with the goal of moving through one project each
month. We have essentially had a January project (flesh to nougat) and there
is a new project starting today for February:
https://www.bricklink.com/help.asp?helpID=2476
What is this project?
This project involves accurately describing the differences between early (old)
versions of an item and later (new) versions. We need this for two reasons:
1. Using the words "old" and "new" were easy ways to avoid having to describe
actual differences between items. Set numbers in minifigure titles performed
the same function, which is why they were removed.
2. When a third version of an item appears, the old/new descriptors are useless.
Similar items should be described by their differences (usually the way in which
the later version is different from the earlier version).
There are around 500-1000 items expected to be affected by this project.
How can members contribute?
For the immediate moment, members may contribute by submitting title change requests.
I'm not sure how we're going to do item numbers yet, so hold off on
those. If you're not confident that you know exactly what this project entails
or need clarification on a specific issue, then please ask before submitting
a request.
For the immediate moment, ignore the additional topic bundled with this project
(looking at the use of with/without in titles). We may be able to include that,
or it may need to be made its own project. This project should also look at
the use of early/later descriptors since they serve the same function as the
terms old/new.
The goal is to wrap this up by the end of February. Of course, we also have
catalog work still to do and that takes precedence over projects - so this may
run over schedule.
|
|
|
|
Author: | randyf | Posted: | Feb 7, 2020 18:12 | Subject: | Re: February Roadmap Project: Old and New | Viewed: | 54 times | Topic: | Catalog | |
|
| I suggest adding names and titles that have "Type 1", "Type 2", etc. in them
to the project. Those terms are useless.
Cheers,
Randy
In Catalog, StormChaser writes:
| We are finally making serious headway with the catalog backlog. The catalog
change requests queue is cleared out.
In the spirit of trying to ensure that the Catalog Roadmap is not just something
to look at, I am continuing with the goal of moving through one project each
month. We have essentially had a January project (flesh to nougat) and there
is a new project starting today for February:
https://www.bricklink.com/help.asp?helpID=2476
What is this project?
This project involves accurately describing the differences between early (old)
versions of an item and later (new) versions. We need this for two reasons:
1. Using the words "old" and "new" were easy ways to avoid having to describe
actual differences between items. Set numbers in minifigure titles performed
the same function, which is why they were removed.
2. When a third version of an item appears, the old/new descriptors are useless.
Similar items should be described by their differences (usually the way in which
the later version is different from the earlier version).
There are around 500-1000 items expected to be affected by this project.
How can members contribute?
For the immediate moment, members may contribute by submitting title change requests.
I'm not sure how we're going to do item numbers yet, so hold off on
those. If you're not confident that you know exactly what this project entails
or need clarification on a specific issue, then please ask before submitting
a request.
For the immediate moment, ignore the additional topic bundled with this project
(looking at the use of with/without in titles). We may be able to include that,
or it may need to be made its own project. This project should also look at
the use of early/later descriptors since they serve the same function as the
terms old/new.
The goal is to wrap this up by the end of February. Of course, we also have
catalog work still to do and that takes precedence over projects - so this may
run over schedule.
|
|
|
Author: | axaday | Posted: | Feb 7, 2020 17:27 | Subject: | Re: February Roadmap Project: Old and New | Viewed: | 51 times | Topic: | Catalog | |
|
|
So like we would change this to "NBA Jason Kidd, Dark Blue Jersey Nets #5", right?
|
Author: | SezaR | Posted: | Feb 7, 2020 15:45 | Subject: | Inventory Change Request for Set 560-1 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part BA108pb01 Red Stickered Assembly 3 x 6 x 1 with Awning Pattern (Sticker) - Sets 376-2 and 560-1 - 1 Slope 33 3 x 4, 1 Slope 33 3 x 2 (Counterpart)
|
Author: | mfav | Posted: | Feb 7, 2020 15:45 | Subject: | Re: February Roadmap Project: Old and New | Viewed: | 67 times | Topic: | Catalog | |
|
| In Catalog, jennnifer writes:
| Sure! I'll play along...
I am not convinced that 90460 is really a new version of 6131.
|
I don't know which number to ascribe to which hat, but there are hat differences.
http://v4ei.com/brickref/wizard-hats.php
|
Author: | SezaR | Posted: | Feb 7, 2020 15:44 | Subject: | Inventory Change Request for Set 376-2 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part BA108pb01 Red Stickered Assembly 3 x 6 x 1 with Awning Pattern (Sticker) - Sets 376-2 and 560-1 - 1 Slope 33 3 x 4, 1 Slope 33 3 x 2 (Counterpart)
|
|
Author: | popsicle | Posted: | Feb 7, 2020 15:42 | Subject: | Re: February Roadmap Project: Old and New | Viewed: | 106 times | Topic: | Catalog | |
|
| In Catalog, jennnifer writes:
| Sure! I'll play along...
I am not convinced that 90460 is really a new version of 6131.
They look the same and LEGO uses the same thumbnail image for both. The small
image in Dark Green that I submitted for 90460 was back in the days before I
knew what I was doing. I cannot confirm the part number or what set it was from.
(I guess we all start somewhere!)
Anyway, I would like to see convincing side by side proof that they are significantly
different even if they have different mold numbers. I have not found any molded
with 90460. My Witch from Series 2 has been played with so I cannot confirm it
there either.
I am open to hearing any ideas or missing information about this!
|
I've got a question, Jen...
When are you going to arrive at the same conclusion that StormChaser already
has, that the BL catalog needs those like you (passion for, and knowledge of
the catalog process) and rejoin the team?
It is abundantly clear, that like Robert, you care and are impassioned about
BrickLink's catalog construction.
Consider with those already in place, and you (maybe a few others I can think
of) it would be the makings of a BL Catalog Dream Team.
|
|
Author: | Jan_K | Posted: | Feb 7, 2020 15:28 | Subject: | Inventory Change Request for Set 6255-1 | Viewed: | 33 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Book 102717US Pirate Comic - The Golden Medallion (102717-USA) (Alternate) (match ID 1)
Comments from Submitter:
US version of the set.
|
|
Author: | jennnifer | Posted: | Feb 7, 2020 15:10 | Subject: | Re: February Roadmap Project: Old and New | Viewed: | 82 times | Topic: | Catalog | |
|
| Sure! I'll play along...
I am not convinced that 90460 is really a new version of 6131.
They look the same and LEGO uses the same thumbnail image for both. The small
image in Dark Green that I submitted for 90460 was back in the days before I
knew what I was doing. I cannot confirm the part number or what set it was from.
(I guess we all start somewhere!)
Anyway, I would like to see convincing side by side proof that they are significantly
different even if they have different mold numbers. I have not found any molded
with 90460. My Witch from Series 2 has been played with so I cannot confirm it
there either.
I am open to hearing any ideas or missing information about this!
Thanks,
Jen
|
|
Author: | StormChaser | Posted: | Feb 7, 2020 14:45 | Subject: | February Roadmap Project: Old and New | Viewed: | 243 times | Topic: | Catalog | Status: | Open | |
|
| We are finally making serious headway with the catalog backlog. The catalog
change requests queue is cleared out.
In the spirit of trying to ensure that the Catalog Roadmap is not just something
to look at, I am continuing with the goal of moving through one project each
month. We have essentially had a January project (flesh to nougat) and there
is a new project starting today for February:
https://www.bricklink.com/help.asp?helpID=2476
What is this project?
This project involves accurately describing the differences between early (old)
versions of an item and later (new) versions. We need this for two reasons:
1. Using the words "old" and "new" were easy ways to avoid having to describe
actual differences between items. Set numbers in minifigure titles performed
the same function, which is why they were removed.
2. When a third version of an item appears, the old/new descriptors are useless.
Similar items should be described by their differences (usually the way in which
the later version is different from the earlier version).
There are around 500-1000 items expected to be affected by this project.
How can members contribute?
For the immediate moment, members may contribute by submitting title change requests.
I'm not sure how we're going to do item numbers yet, so hold off on
those. If you're not confident that you know exactly what this project entails
or need clarification on a specific issue, then please ask before submitting
a request.
For the immediate moment, ignore the additional topic bundled with this project
(looking at the use of with/without in titles). We may be able to include that,
or it may need to be made its own project. This project should also look at
the use of early/later descriptors since they serve the same function as the
terms old/new.
The goal is to wrap this up by the end of February. Of course, we also have
catalog work still to do and that takes precedence over projects - so this may
run over schedule.
|
|
Author: | saosivert | Posted: | Feb 7, 2020 13:34 | Subject: | Inventory Change Request for Set 70593-1 | Viewed: | 38 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 50950pb123 Dark Green Slope, Curved 3 x 1 with Scales and Gold Lion Head Pattern (Sticker) - Set 70593 (Counterpart)
|
Author: | Gp8871 | Posted: | Feb 7, 2020 12:54 | Subject: | Inventory Change Request for Set 75095-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 90498pb15 Black Tile 8 x 16 with Bottom Tubes with TIE/Ln Starfighter Pattern (Sticker) - Set 75095 (Counterpart)
|
|
Author: | randyf | Posted: | Feb 7, 2020 12:51 | Subject: | Re: 30374 Bar 1x4 Frosted Variant | Viewed: | 35 times | Topic: | Catalog | |
|
| In Catalog, mfav writes:
| In Catalog, Hygrotus writes:
| In Catalog, mfav writes:
I have also third variant 28697 not frosted. It looks like 30374 but has new
number molded on it. Checked under very high magnification.
|
...and an unnumbered version...
pic updated.
|
Yep. The original bars had no markings on them at all.
|
|
Author: | Gp8871 | Posted: | Feb 7, 2020 12:25 | Subject: | Re: Inventory Change Request for Set 75095-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, Gp8871 writes:
| Why was the request rejected?
|
I believe I've explained that. You can't add the part without a sticker
in the way you requested. However, the correct part that you submitted has been
approved to the catalog:
That one may be added to the set inventory.
|
I think i got it.
Will submit the part i created to the counterpart collection of the set.
|
|
Author: | mfav | Posted: | Feb 7, 2020 12:08 | Subject: | Re: 30374 Bar 1x4 Frosted Variant | Viewed: | 39 times | Topic: | Catalog | |
|
| In Catalog, Hygrotus writes:
| In Catalog, mfav writes:
I have also third variant 28697 not frosted. It looks like 30374 but has new
number molded on it. Checked under very high magnification.
|
...and an unnumbered version...
pic updated.
|
|
Author: | Hygrotus | Posted: | Feb 7, 2020 11:40 | Subject: | Re: 30374 Bar 1x4 Frosted Variant | Viewed: | 35 times | Topic: | Catalog | |
|
| In Catalog, Hygrotus writes:
| In Catalog, mfav writes:
I have also third variant 28697 not frosted. It looks like 30374 but has new
number molded on it. Checked under very high magnification.
|
P.S. with this new number 28697 there is also trans red, trans neon green and
trans purple
I have trans purple molded 28697 from this set
and it is not frosted.
Have no idea why only trans light blue is affected.
|
|
Author: | Hygrotus | Posted: | Feb 7, 2020 11:36 | Subject: | Re: 30374 Bar 1x4 Frosted Variant | Viewed: | 38 times | Topic: | Catalog | |
|
| In Catalog, mfav writes:
I have also third variant 28697 not frosted. It looks like 30374 but has new
number molded on it. Checked under very high magnification.
|
|
|
Author: | pikachu3 | Posted: | Feb 7, 2020 10:51 | Subject: | Re: 30374 Bar 1x4 Frosted Variant | Viewed: | 36 times | Topic: | Catalog | |
|
| In Catalog, Brick.Door writes:
| Found some frosted trans-light-blue 1x4 bars in a set recently and I'm not
comfortable mixing them with my current inventory. They are quite different and
I don't think a customer who orders several would be happy getting a mixture.
The additional notes state:
"Alternate item number 28697 is used for transparent colors. This mold variant
has no bubbles and number 28697 molded on it. It has been found in two variations
clear and frosted as showed on additional images."
So it seems the catalog admins are aware of the difference and have decided not
to reflect it in the catalog here? Personally I think this is a mold variation
worth recognizing.
|
I agree. I had about 4000 of the old kind, and went to the Lego store to get
1000 more to finish a MOC. They only had the new frosted kind, which would look
very out of place next to the ones I already had, so I had to find them elsewhere.
For sellers, these should be easy to separate. I'd also like to see the rounded
vs. flat ends separated in the catalog but that may be more difficult
|
|
Author: | Brick.Door | Posted: | Feb 7, 2020 10:39 | Subject: | 30374 Bar 1x4 Frosted Variant | Viewed: | 84 times | Topic: | Catalog | Status: | Open | |
|
| Found some frosted trans-light-blue 1x4 bars in a set recently and I'm not
comfortable mixing them with my current inventory. They are quite different and
I don't think a customer who orders several would be happy getting a mixture.
The additional notes state:
"Alternate item number 28697 is used for transparent colors. This mold variant
has no bubbles and number 28697 molded on it. It has been found in two variations
clear and frosted as showed on additional images."
So it seems the catalog admins are aware of the difference and have decided not
to reflect it in the catalog here? Personally I think this is a mold variation
worth recognizing.
|
|
Author: | rick_holl | Posted: | Feb 7, 2020 09:08 | Subject: | Re: The 6x6 tiles in 10227 B-Wing | Viewed: | 35 times | Topic: | Catalog | |
|
| In Catalog, randyf writes:
| In Catalog, rick_holl writes:
| Anyone knows if those tiles are flat or they have a shiny finish?
Thank you
|
6 x 6 tiles have a matte finish.
Cheers,
Randy
|
Thank you Randy!
|
Author: | Hygrotus | Posted: | Feb 7, 2020 07:32 | Subject: | Inventory Change Request for Set 9496-1 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3626cpb0749 Reddish Brown Minifigure, Head Moustache Thin Split, Smile, Eyebrows, Eyes with White Pupils Pattern (SW Lando) - Hollow Stud (Alternate) (match ID 5)
Comments from Submitter:
Please also add a note to
This minifigure has been found with both the 'b' and 'c' style head.
|
|
Author: | doolallytap | Posted: | Feb 7, 2020 06:42 | Subject: | Re: Identifying minifigures | Viewed: | 32 times | Topic: | Catalog | |
|
| Identify the torso assembly and then you can see which minifigs it is part of
in the 'item appears in' look up the minifigs that it relates to, then
part out that minif and you will see all the parts required.
|
|
Author: | Hygrotus | Posted: | Feb 7, 2020 01:20 | Subject: | Inventory Change Request for Set 41403-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 64454pb01 Lime Container, Box 3 x 8 x 6 2/3 Half Back with Towel, Bottles, Stethoscope, Leash and Collar Pattern (Sticker) - Set 41403 (Counterpart)
* Add 1 Part 15210pb058 Dark Bluish Gray Road Sign Clip-On 2 x 2 Square Open O Clip with Bunny on Orange Square Pattern (Sticker) - Set 41403 (Counterpart)
* Add 1 Part 85984pb240 Light Aqua Slope 30 1 x 2 x 2/3 with Dark Azure Gauge Pattern (Sticker) - Set 41403 (Counterpart)
|
|
Author: | randyf | Posted: | Feb 6, 2020 22:03 | Subject: | Re: Inventory Change Request for Set 4484-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, ZwarteMagica writes:
| Please make changes to the following inventory:
* Change 1 Part Black 2609b Magnet Holder Tile 2 x 2 - Tall Arms with Deep Notch {Regular to Extra}
* Change 2 Part Light Gray 4032 Plate, Round 2 x 2 with Axle Hole {Regular to Extra}
Comments from Submitter:
Since the 4871, 4854 and 6636 are extra items, I assume those parts also need to be listed as extra`s. Since they are also exclusive used in the cross over model.
|
According to BrickLink inventory guidelines, in the absence of an official parts
list for a set, the official part count on the set packaging can be used to determine
as closely as possible the contents of the Regular Items section of the set inventory:
https://www.bricklink.com/help.asp?helpID=1562
Since the official part count on the packaging for this set is 76 pieces, all
of the parts included in this set to be used to build the mini TIE bomber are
Regular Items.
Therefore, these requests will not be accepted, and I will adjust the inventory
manually to account for the required changes.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Feb 6, 2020 20:58 | Subject: | Re: Inventory Change Request for Set 75236-1 | Viewed: | 27 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, toontexas writes:
| Please make changes to the following inventory:
* Add 1 Part 87083 Dark Bluish Gray Technic, Axle 4 with Stop (Alternate) (match ID 1)
Comments from Submitter:
I parted out two sets. One set had a red axle 3703 plus a dbg axle 87083, the other set had only two dbg axles 87083 (no red axle).
|
The set requires one
and two
as shown on pages 35, 50, and 55 of the instructions as well as in the official
parts list.
Since the quantity of these parts is correct in the inventory, this request will
not be accepted.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Feb 6, 2020 20:19 | Subject: | Re: Inventory Change Request for Part spa0010 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Gemini343 writes:
| Please make changes to the following inventory:
* Change {4 to 5} Part Dark Green 3023 Plate 1 x 2
Comments from Submitter:
According to the picture and instructions there should be two per leg and one on the torso.
|
Thank you for finding this error!
Instead of the fifth
there is a misplaced
in the inventory.
I have accepted this request and made the additional change manually.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Feb 6, 2020 18:16 | Subject: | Re: The 6x6 tiles in 10227 B-Wing | Viewed: | 55 times | Topic: | Catalog | |
|
| In Catalog, rick_holl writes:
| Anyone knows if those tiles are flat or they have a shiny finish?
Thank you
|
6 x 6 tiles have a matte finish.
Cheers,
Randy
|
Author: | rick_holl | Posted: | Feb 6, 2020 16:52 | Subject: | The 6x6 tiles in 10227 B-Wing | Viewed: | 104 times | Topic: | Catalog | Status: | Open | |
|
| Anyone knows if those tiles are flat or they have a shiny finish?
Thank you
|
Author: | apple_brick | Posted: | Feb 6, 2020 06:19 | Subject: | Re: catalogue problem - zero lots showing up | Viewed: | 54 times | Topic: | Catalog | |
|
| | | It may have to do with the software they use to upload and sync their inventory.
This shouldn't be possible, however. Zero QTY lots should only be retained
in a stockroom.
|
|
Hi Russelm
All our zero qty lots are in stockroom. So seems like a BL bug.
|
|
Author: | apple_brick | Posted: | Feb 6, 2020 06:10 | Subject: | Re: catalogue problem - zero lots showing up | Viewed: | 42 times | Topic: | Catalog | |
|
| Hi Russell,
Someone just pointed me to this topic, which i never saw earlier.
Can this be the reason that lots are 'disappearing' from our inventory?
That would be a bad thing to do i think. Can you confirm this?
Today i noticed a lot of older regular items have been removed / or renewed with
a different Lot Id. That's causing issues on our side.
Maybee you can contact us, so we can discuss this?
Regards,
Rick
|
|
Author: | FreeStorm | Posted: | Feb 6, 2020 06:07 | Subject: | Inventory Change Request for Set 7760-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* | | 7760-1 (Inv) Electric Diesel Locomotive (Diesel Shunter Locomotive) 144 Parts, 2 Minifigures, 1980 Sets: Train: 12V |
* Change {1 to 2} Part Blue 3004pb033 Brick 1 x 2 with White '7760' Pattern (Sticker) - Set 7760 (Counterpart)
Comments from Submitter:
Add another part for right side of the locomotive.
|
|
Author: | StormChaser | Posted: | Feb 6, 2020 03:44 | Subject: | Re: Correction sheet for set 8847 | Viewed: | 33 times | Topic: | Catalog | |
|
| In Catalog, anathema writes:
| The same applies to set 8843, too - I have the supplemental sheet (which I'll
add in the next few days when I get it scanned) and the updated version of the
instructions.
|
BrickLink does not have any record in the inventory of this set of a redesign.
However, I have added a note to the instructions anyway:
You might see about updating the set inventory when you get a minute.
|
|
Author: | anathema | Posted: | Feb 6, 2020 03:39 | Subject: | Re: Correction sheet for set 8847 | Viewed: | 30 times | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| In Catalog, anathema writes:
| Could you also add a note to say that there are two versions of the instruction
booklet too, please? The booklet was updated to incorporate the changes from
the supplemental sheet.
|
Well . . . okay. You talked me into it. You have your note.
|
Thanks!
The same applies to set 8843, too - I have the supplemental sheet (which I'll
add in the next few days when I get it scanned) and the updated version of the
instructions.
|
|
Author: | StormChaser | Posted: | Feb 6, 2020 03:11 | Subject: | Re: Correction sheet for set 8847 | Viewed: | 34 times | Topic: | Catalog | |
|
| In Catalog, anathema writes:
| Could you also add a note to say that there are two versions of the instruction
booklet too, please? The booklet was updated to incorporate the changes from
the supplemental sheet.
|
Well . . . okay. You talked me into it. You have your note.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|