Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | calsbricks | Posted: | Feb 9, 2020 04:49 | Subject: | Re: Description Standardization Note | Viewed: | 44 times | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| In Catalog, mfav writes:
| It would be good for consistency in the catalog description if all instances
of numbers were either integers or words, not arbitrarily some of each.
|
I have noticed this before and definitely agree it needs to be worked on. The
problem is (and I'm starting to understand the rearranging the chairs thing)
there are too many problems.
In the case of this problem, you can't even find the problem because you
can't search for it. So it would involve examining every single catalog
entry. All 100K+ of them.
And perhaps, when the next problem comes along, examining all of them again.
It almost makes a person think that there must be a better way . .
|
The answer is really quite simple - talk to a SQL person and they will advise
you how to organise your query to find precisely what you want. It isn't
rocket science. .
|
|
Author: | FreeStorm | Posted: | Feb 9, 2020 03:59 | Subject: | Re: Description Standardization Note | Viewed: | 46 times | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| In the case of this problem, you can't even find the problem because you
can't search for it. So it would involve examining every single catalog
entry. All 100K+ of them.
|
What do you want to find?
Something like this?
"* three *" = 153 results
"* 3 *" = 6675 results
"* three *" AND "* 3 *" = 16 results
As example, last search find:
"Technic, Panel Car Spoiler 3 x 8 with Three Holes and Black and Yellow Danger
Stripes and Mud Pattern (Stickers) - Set 7968"
"Primo Brick 1 x 1 with Three Flowers and Number 3 on Opposite Side Pattern"
Of course,I made query to find only for "three" and "3" on same description,
but with a regexp it should be simple to spot every "word digit" with "digit"
on same description like "blah with two legs and 1 arm"
Some other incoherence (digit 3 should be between '' when you have pattern
after):
"*number 3 *pattern*" = 22 result
"*number '3' *pattern*" = 3 result
If you know what you want to find, it should be easy to make a search query,
to spot the majority of incoherence.
-Fred
|
|
Author: | SezaR | Posted: | Feb 9, 2020 03:44 | Subject: | Re: Inventory Change Request for Set 6074-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Change 1 Part Blue 4502a Minifigure, Plume Feather Small {Regular to Extra}
* Change 1 Part Red 4502a Minifigure, Plume Feather Small {Regular to Extra}
Comments from Submitter:
I do not see these parts used on any model. If they are not going to be in the inventory as sprue, isn't it better to move them to the extra section?
|
From the Additional Information About Regular Items section of the Inventory
Sections: Regular, Extra, Counterpart, and Alternate help page:
https://www.bricklink.com/help.asp?helpID=1562
Parts on Sprues - Complete sprues are included in this section unless
some parts from the sprues are used in minifigures. In that case, the parts from
the sprues that are not used in minifigures are included in this section.
These requests will not be accepted.
Cheers,
Randy
|
I don't find this a good policy for this case.
Cheers,
Reza
|
All parts used for main or any other model of the set go to the regular section.
This is a good policy for regular section. Any other part that happened to come
with the set, not used in any model, directly or indirectly, is better to be
in the extra section.
I see we will have anyway some inconsistency with parts coming with sprues, no
matter which policy is chosen.
|
|
Author: | StormChaser | Posted: | Feb 9, 2020 03:29 | Subject: | Re: Description Standardization Note | Viewed: | 60 times | Topic: | Catalog | |
|
| In Catalog, mfav writes:
| It would be good for consistency in the catalog description if all instances
of numbers were either integers or words, not arbitrarily some of each.
|
I have noticed this before and definitely agree it needs to be worked on. The
problem is (and I'm starting to understand the rearranging the chairs thing)
there are too many problems.
In the case of this problem, you can't even find the problem because you
can't search for it. So it would involve examining every single catalog
entry. All 100K+ of them.
And perhaps, when the next problem comes along, examining all of them again.
It almost makes a person think that there must be a better way . . .
|
|
Author: | randyf | Posted: | Feb 9, 2020 03:22 | Subject: | Re: Inventory Change Request for Set 6074-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Change 1 Part Blue 4502a Minifigure, Plume Feather Small {Regular to Extra}
* Change 1 Part Red 4502a Minifigure, Plume Feather Small {Regular to Extra}
Comments from Submitter:
I do not see these parts used on any model. If they are not going to be in the inventory as sprue, isn't it better to move them to the extra section?
|
From the Additional Information About Regular Items section of the Inventory
Sections: Regular, Extra, Counterpart, and Alternate help page:
https://www.bricklink.com/help.asp?helpID=1562
Parts on Sprues - Complete sprues are included in this section unless
some parts from the sprues are used in minifigures. In that case, the parts from
the sprues that are not used in minifigures are included in this section.
These requests will not be accepted.
Cheers,
Randy
|
I don't find this a good policy for this case.
Cheers,
Reza
|
Opinion noted.
|
|
Author: | hpoort | Posted: | Feb 9, 2020 03:00 | Subject: | Re: Description standardization note | Viewed: | 48 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| In Catalog, mfav writes:
| It would be good for consistency in the catalog description if all instances
of numbers were either integers or words, not arbitrarily some of each.
So:
Three eyeballs, Three earlobes
or
3 eyeballs, 3 earlobes
not
Three eyeballs, 3 earlobes
...that kind of thing.
There are pros and cons for each option. Please investigate how the search mechanism
works to see which option yields better results.
|
Unfortunately, single digits are thrown out of many of the search results. But
I think in general one would find more numerals in item names than the words
spelled out simply because it makes the name shorter.
|
Please drop the keyword exclusion altogether.
It does not make sense to make use of a full text English language keyword exclusion
list, when the contents of the database is actually not normal full text English,
but a specific dialect: Bricklink English (EN-BL) in which it makes more sense
to search for keywords like 'with' and 'without' and for single
digits. It should be easy to adjust the database configuration. No programming
involved.
Hans-Peter
|
|
Author: | SezaR | Posted: | Feb 9, 2020 02:52 | Subject: | Re: Inventory Change Request for Set 6074-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Change 1 Part Blue 4502a Minifigure, Plume Feather Small {Regular to Extra}
* Change 1 Part Red 4502a Minifigure, Plume Feather Small {Regular to Extra}
Comments from Submitter:
I do not see these parts used on any model. If they are not going to be in the inventory as sprue, isn't it better to move them to the extra section?
|
From the Additional Information About Regular Items section of the Inventory
Sections: Regular, Extra, Counterpart, and Alternate help page:
https://www.bricklink.com/help.asp?helpID=1562
Parts on Sprues - Complete sprues are included in this section unless
some parts from the sprues are used in minifigures. In that case, the parts from
the sprues that are not used in minifigures are included in this section.
These requests will not be accepted.
Cheers,
Randy
|
I don't find this a good policy for this case.
Cheers,
Reza
|
|
Author: | randyf | Posted: | Feb 9, 2020 02:46 | Subject: | Re: Inventory Change Request for Set 6074-1 | Viewed: | 33 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Change 1 Part Blue 4502a Minifigure, Plume Feather Small {Regular to Extra}
* Change 1 Part Red 4502a Minifigure, Plume Feather Small {Regular to Extra}
Comments from Submitter:
I do not see these parts used on any model. If they are not going to be in the inventory as sprue, isn't it better to move them to the extra section?
|
From the Additional Information About Regular Items section of the Inventory
Sections: Regular, Extra, Counterpart, and Alternate help page:
https://www.bricklink.com/help.asp?helpID=1562
Parts on Sprues - Complete sprues are included in this section unless
some parts from the sprues are used in minifigures. In that case, the parts from
the sprues that are not used in minifigures are included in this section.
These requests will not be accepted.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Feb 9, 2020 02:38 | Subject: | Re: Inventory Change Request for Set 4758-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 1 Part {Earth Orange to Dark Nougat} 30374 Bar 4L (Lightsaber Blade / Wand)
Comments from Submitter:
Pics to follow
|
Congratulations on being the first person to get a true Dark Nougat part into
an inventory!
|
|
Author: | SezaR | Posted: | Feb 9, 2020 01:35 | Subject: | Re: Inventory Change Request for Set 6074-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SylvainLS writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Change 1 Part Blue 4502a Minifigure, Plume Feather Small {Regular to Extra}
* Change 1 Part Red 4502a Minifigure, Plume Feather Small {Regular to Extra}
Comments from Submitter:
I do not see these parts used on any model. If they are not going to be in the inventory as sprue, isn't it better to move them to the extra section?
|
Look for posts from 62bricks and the admins’ answers….
|
Sylvain,
Comme tu as lu leur opinion, tu n'as pas vu que j'ai meme participe aux
discussions?
|
|
Author: | axaday | Posted: | Feb 8, 2020 23:39 | Subject: | Re: Inventory Change Request for Set 4758-1 | Viewed: | 32 times | Topic: | Inventories Requests | |
|
| | I couldn't say without seeing the setup. It could be a diffuser, but it needs
to be positioned correctly. I'm seeing hard white highlights on the tiger
figure which suggests hard direct light. Also seems the light is coming from
the sides, kind of backlit.
|
I'm going to let you help me.
| Phones are a pain because of the wide angle lens. You end up always having to
be between the light source and the object if you want to get a closeup. There
may be telephoto clip-on lenses that might help. Also a tripod/clamp/mount.
|
I have a Moment case and a Moment telephoto lens, but I barely use it because
it won't work for me. But I have a cheap, cheap on that does and the Moment
case holds it at the right position.
| Are you doing any postproduction with Photoshop or Gimp or something?
|
Yes, Photoshop Elements.
| By the way, did I mention: The page cannot be displayed because an internal server
error has occurred.
|
I don't know if you did this time, but you have mentioned it before.
|
|
Author: | axaday | Posted: | Feb 8, 2020 23:36 | Subject: | Inventory Change Request for Set 4758-1 | Viewed: | 41 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4032b Black Plate, Round 2 x 2 with Axle Hole - X Opening (Alternate) (match ID 1)
* Add 1 Part 32064b Light Bluish Gray Technic, Brick 1 x 2 with Axle Hole - X Opening (Alternate) (match ID 2)
* Add 1 Part 4032b Yellow Plate, Round 2 x 2 with Axle Hole - X Opening (Alternate) (match ID 3)
* Change 2 Part Reddish Brown {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 2 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301a Hinge Plate 1 x 2 Locking with 1 Finger On End with Bottom Groove}
* Change 1 Part Black 4032 Plate, Round 2 x 2 with Axle Hole {match ID 0 to 1}
* Change 1 Part Light Bluish Gray 32064 Technic, Brick 1 x 2 with Axle Hole {match ID 0 to 2}
* Change 1 Part Yellow 4032 Plate, Round 2 x 2 with Axle Hole {match ID 0 to 3}
Comments from Submitter:
I apologize for no pictures. I was so excited about the dark nougat bar that I forgot I had other undetermined pieces. When I set out to sort out the set I dumped all the bags and then started to find variants when it was too late.
|
|
Author: | mfav | Posted: | Feb 8, 2020 23:00 | Subject: | Re: Inventory Change Request for Set 4758-1 | Viewed: | 39 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| In Inventories Requests, mfav writes:
| mfav thinks he'd like to see a wide shot of whateverthehell it is you're
doing for your "studio setup"...background, lights, camera, etc.
|
1 level up from cheapest tent on Amazon, ultra-bright LED bulbs, iPhone XR
| mfav thinks you've got some awesome light temperature going on there, but
could use a diffuser
|
Isn't the tent a diffuser?
|
I couldn't say without seeing the setup. It could be a diffuser, but it needs
to be positioned correctly. I'm seeing hard white highlights on the tiger
figure which suggests hard direct light. Also seems the light is coming from
the sides, kind of backlit.
Phones are a pain because of the wide angle lens. You end up always having to
be between the light source and the object if you want to get a closeup. There
may be telephoto clip-on lenses that might help. Also a tripod/clamp/mount.
Also look into the Neural Cam app for iPhone.
Are you doing any postproduction with Photoshop or Gimp or something?
By the way, did I mention: The page cannot be displayed because an internal server
error has occurred.
|
|
Author: | mfav | Posted: | Feb 8, 2020 22:49 | Subject: | Re: Description standardization note | Viewed: | 63 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| Unfortunately, single digits are thrown out of many of the search results.
|
Aren't you the fella to talk to to get that changed, Mister Site Manager?
| But I think in general one would find more numerals in item names than the words
spelled out simply because it makes the name shorter.
|
While that is undoubtedly true, it's not particularly helpful in any way.
If you search, say, legs assemblies...
search for "three" you get two results
search for "3" you get: The following keywords were excluded from your search:
3
...however there are 13 entries containing "3"
Isn't the point of StormBluser's standardization plan to fix this stuff?
To paraphrase the StormBluser: why name something like this when 75% of the search
words are invalid?
Again, I'll make the point you need to distinguish between identification
and discovery. The identification of a thing is irrelevant if it can't be
discovered. People use the search box to find things, they don't browse 180,000
individual items looking for "3". Hope you get my drift.
Aren't you the number one proponent of making the catalog useful? Let's
figure out a way to make it useful.
|
|
Author: | Brixalotl | Posted: | Feb 8, 2020 22:38 | Subject: | Inventory Change Request for Set 76134-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 44302b Dark Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove (Alternate) (match ID 1)
* Change 2 Part Dark Bluish Gray 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove {match ID 0 to 1}
Comments from Submitter:
found both variants during part out, thanks
|
|
Author: | Leftoverbricks | Posted: | Feb 8, 2020 22:24 | Subject: | Re: Sticker # When adding Items | Viewed: | 35 times | Topic: | Catalog | |
|
| In Catalog, OmnipresentECA writes:
| I have come across a few tiles with stickers that are not in the catalog.
, nor in their set inventory.
How do I go about determining the Sticker # when Adding to the catalog.
For example one is a 87079pb###, how do I determine the last few digits?
|
Search for 87079pb*
You will get 725 results. The next ‘free’ number should be 726.
|
|
Author: | RecycledBrick | Posted: | Feb 8, 2020 22:13 | Subject: | Inventory Change Request for Set 70356-1 | Viewed: | 31 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 87079pb666 Dark Bluish Gray Tile 2 x 4 with Dark Purple Stone Pattern (Sticker) - Set 70356 (Counterpart)
* Add 1 Part 3039pb130 Dark Bluish Gray Slope 45 2 x 2 with Stone and Energy Pattern (Sticker) - Set 70356 (Counterpart)
* Add 1 Part 15068pb223 Dark Bluish Gray Slope, Curved 2 x 2 with Stone and Energy Pattern (Sticker) - Set 70356 (Counterpart)
* Add 1 Part 24309pb015 Black Slope, Curved 3 x 2 with Stone and Energy Pattern (Sticker) - Set 70356 (Counterpart)
* Add 1 Part 22387pb003 Black Panel 2 x 6 x 6 With Window Slot with Stone and Energy Pattern (Stickers) - Set 70356 (Counterpart)
* Add 1 Part 60581pb131 Black Panel 1 x 4 x 3 with Side Supports - Hollow Studs with Stone and Energy Pattern (Sticker) - Set 70356 (Counterpart)
* Add 1 Part 87544pb056L Black Panel 1 x 2 x 3 with Side Supports - Hollow Studs with Stone and Energy Pattern Model Left Side (Sticker) - Set 70356 (Counterpart)
* Add 1 Part 87544pb056R Black Panel 1 x 2 x 3 with Side Supports - Hollow Studs with Stone and Energy Pattern Model Right Side (Sticker) - Set 70356 (Counterpart)
|
|
Author: | axaday | Posted: | Feb 8, 2020 21:41 | Subject: | Re: Inventory Change Request for Set 4758-1 | Viewed: | 39 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, mfav writes:
| mfav thinks he'd like to see a wide shot of whateverthehell it is you're
doing for your "studio setup"...background, lights, camera, etc.
|
1 level up from cheapest tent on Amazon, ultra-bright LED bulbs, iPhone XR
| mfav thinks you've got some awesome light temperature going on there, but
could use a diffuser
|
Isn't the tent a diffuser?
|
|
|
Author: | mfav | Posted: | Feb 8, 2020 21:08 | Subject: | Description standardization note | Viewed: | 168 times | Topic: | Catalog | Status: | Open | |
|
| It would be good for consistency in the catalog description if all instances
of numbers were either integers or words, not arbitrarily some of each.
So:
Three eyeballs, Three earlobes
or
3 eyeballs, 3 earlobes
not
Three eyeballs, 3 earlobes
...that kind of thing.
There are pros and cons for each option. Please investigate how the search mechanism
works to see which option yields better results.
|
|
Author: | waltzking | Posted: | Feb 8, 2020 19:49 | Subject: | Inventory Change Request for Set 60270-1 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 30258pb018 Black Road Sign Clip-on 2 x 2 Square with Curved Blue Lines and Small Black Squares Pattern (Computer Screen)
* Add 1 Part 15210pb002 Black Road Sign Clip-On 2 x 2 Square Open O Clip with Curved Blue Lines and Small Black Squares Pattern (Computer Screen)
|
|
Author: | mfav | Posted: | Feb 8, 2020 18:18 | Subject: | Re: Inventory Change Request for Set 4758-1 | Viewed: | 42 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| mfav is welcomed to steel these pics.
|
mfav thinks he's not interested in the pics once they've gone through
the bricklink imagemangler
mfav thinks he'd like to see a wide shot of whateverthehell it is you're
doing for your "studio setup"...background, lights, camera, etc.
mfav thinks you've got some awesome light temperature going on there, but
could use a diffuser
mfav also thinks a bunch of other stuff, but is going to stop thinking now
|
|
Author: | axaday | Posted: | Feb 8, 2020 17:42 | Subject: | Re: Inventory Change Request for Set 4758-1 | Viewed: | 39 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 1 Part {Earth Orange to Dark Nougat} 30374 Bar 4L (Lightsaber Blade / Wand)
Comments from Submitter:
Pics to follow
|
mfav is welcomed to steel these pics.
|
|
Author: | axaday | Posted: | Feb 8, 2020 17:41 | Subject: | Inventory Change Request for Set 4758-1 | Viewed: | 49 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part {Earth Orange to Dark Nougat} 30374 Bar 4L (Lightsaber Blade / Wand)
Comments from Submitter:
Pics to follow
|
Author: | OmnipresentECA | Posted: | Feb 8, 2020 15:30 | Subject: | Sticker # When adding Items | Viewed: | 52 times | Topic: | Catalog | Status: | Open | |
|
| I have come across a few tiles with stickers that are not in the catalog.
, nor in their set inventory.
How do I go about determining the Sticker # when Adding to the catalog.
For example one is a 87079pb###, how do I determine the last few digits?
|
|
Author: | dcarmine | Posted: | Feb 8, 2020 14:53 | Subject: | Re: February Roadmap Project: Old and New | Viewed: | 53 times | Topic: | Catalog | |
|
| In Catalog, axaday writes:
| In Catalog, dcarmine writes:
| According to the new standard for "difference types" the difference has to be
related to the way a part functions, not just cosmetic differences. So with
that rule, there would be only one entry for this hat.
|
I think there you are talking about run change things. Minor adjustments to
a mold to use less plastic or something that don't change its function at
all don't make "a difference". But a change of design on a hat makes it
a new hat.
|
Ok good to know.
Donna
|
|
Author: | paulvdb | Posted: | Feb 8, 2020 14:39 | Subject: | Re: Inventory Change Request for Set 9463-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, WilliamRaine writes:
| Please make changes to the following inventory:
* Delete 3 Part 3794 Dark Red Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) (match ID 2)
* Delete 1 Part 3794 Light Bluish Gray Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) (match ID 3)
* Add 1 Part 3794a Light Bluish Gray Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper) (match ID 3)
* Change 3 Part Dark Red 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {Alternate to Regular}
Comments from Submitter:
Source: Sealed Set Contents, cleaning up undetermined types.
|
The dark red 3794 should not be deleted. They should be changed to 3794a. See
https://www.bricklink.com/messageThread.asp?ID=263523
|
|
Author: | randyf | Posted: | Feb 8, 2020 14:39 | Subject: | Re: Questions about Unikitty / Counterparts | Viewed: | 32 times | Topic: | Catalog | |
|
| In Catalog, mjwest83 writes:
| In Catalog, Admin_Russell writes:
| But for all other sets, we've decided one entry is enough. To allow more
entries like this would create a precedent with huge implications. So your pending
entries will be rejected in a few days.
|
In regards to the two Unikitties in set , if you only want to list
one of them, fine. But which one? The decision is totally arbitrary. The box
itself is effectively two separate presentations. It doesn't have a front
and back, so much as two fronts. If you look at the instructions, they do NOT
have numbers. Instead it has two equal, independent instruction books. Really,
this set is two completely independent sets that happen to use the same parts.
As such, choosing just one of those Unikitties is a completely arbitrary decision,
and it can be argued that either one should be the primary.
|
The box, instructions, and LEGO set description are definitive about the situation,
although it may not look that way at first.
(1) LEGO lists the first instruction manual as the one used to build the house.
(2) The set is named "Emmet's Dream House/Rescue Rocket!", so it is clear
which model is considered the main model and which is considered the alternate
model.
(3) The set description from LEGO.com says "This 2-in-1 construction toy features
Emmet’s home which can be rebuilt into a rocket."
All of the key information is there to determine that the main model is the house
and the alternate model is the rescue rocket. Based on that determination, the
instruction manual for the house takes precedence.
| This is NOT a case where there is an obvious primary build of the minifigure,
with a side picture showing an alternative build. (Like a character that has
both a helmet and hair, where one is the primary build, and the other is an alternative
for play purposes.) No, this is outright two separate minifigures that just happen
to use common parts. This is a very different case than just about any other
situation.
|
It cannot be two separate minifigures, because there is only one tail for Unikitty
in the set, as well as only one set of ears, one horn, and one headband plate.
Therefore, we have to make a decision about what minifigure gets added to the
set for now. That minifigure was determined based on the above data that I listed.
In the future, when the "Minifigs:" section of an inventory will hopefully just
be an "Assemblies:" section which includes other assembled counterparts, two
different assemblies of parts can be added. However, we are nowhere close to
that.
The admins can discuss this situation some more, but I don't believe we will
come to a different decision at this time.
Cheers,
Randy
|
|
Author: | paulvdb | Posted: | Feb 8, 2020 14:39 | Subject: | Re: Inventory Change Request for Set 9463-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
| Please make changes to the following inventory:
* Change 3 Part Dark Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
See https://youtu.be/wV8s1Rckao0
|
Screenshot showing 3794a:
|
|
|
Author: | paulvdb | Posted: | Feb 8, 2020 14:38 | Subject: | Inventory Change Request for Set 9463-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Dark Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
See https://youtu.be/wV8s1Rckao0
|
|
Author: | mjwest83 | Posted: | Feb 8, 2020 11:31 | Subject: | Re: Questions about Unikitty / Counterparts | Viewed: | 36 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| But for all other sets, we've decided one entry is enough. To allow more
entries like this would create a precedent with huge implications. So your pending
entries will be rejected in a few days.
|
In regards to the two Unikitties in set , if you only want to list
one of them, fine. But which one? The decision is totally arbitrary. The box
itself is effectively two separate presentations. It doesn't have a front
and back, so much as two fronts. If you look at the instructions, they do NOT
have numbers. Instead it has two equal, independent instruction books. Really,
this set is two completely independent sets that happen to use the same parts.
As such, choosing just one of those Unikitties is a completely arbitrary decision,
and it can be argued that either one should be the primary.
This is NOT a case where there is an obvious primary build of the minifigure,
with a side picture showing an alternative build. (Like a character that has
both a helmet and hair, where one is the primary build, and the other is an alternative
for play purposes.) No, this is outright two separate minifigures that just happen
to use common parts. This is a very different case than just about any other
situation.
Also, if they can't be listed as counter-parts, how are they supposed to
be sold. It is flat out the case that this minifigure will be sold as a minifigure,
whether it has a specific listing or not. There are only two ways to do so: one
is as a custom figure (which is pointless) and the other is as an incomplete
set (which is what will be done). When listed as an incomplete set, this pollutes
the averages on which so much stuff is based. When it is such a small part of
the set, that can have a very over-sized impact on those averages. By allowing
the counterpart figure, you avoid those issues.
|
|
Author: | L.tide | Posted: | Feb 8, 2020 10:47 | Subject: | Inventory Change Request for Set 10715-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 34337 White Wheel 8mm D. x 6mm with Slot (Extra)
Comments from Submitter:
last one extra piece to have it complete
|
|
Author: | SylvainLS | Posted: | Feb 8, 2020 03:29 | Subject: | Re: Inventory Change Request for Set 6074-1 | Viewed: | 33 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Change 1 Part Blue 4502a Minifigure, Plume Feather Small {Regular to Extra}
* Change 1 Part Red 4502a Minifigure, Plume Feather Small {Regular to Extra}
Comments from Submitter:
I do not see these parts used on any model. If they are not going to be in the inventory as sprue, isn't it better to move them to the extra section?
|
Look for posts from 62bricks and the admins’ answers….
|
|
Author: | SezaR | Posted: | Feb 8, 2020 02:55 | Subject: | Inventory Change Request for Set 6074-1 | Viewed: | 38 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Blue 4502a Minifigure, Plume Feather Small {Regular to Extra}
* Change 1 Part Red 4502a Minifigure, Plume Feather Small {Regular to Extra}
Comments from Submitter:
I do not see these parts used on any model. If they are not going to be in the inventory as sprue, isn't it better to move them to the extra section?
|
|
Author: | StormChaser | Posted: | Feb 8, 2020 02:39 | Subject: | Re: February Roadmap Project: Old and New | Viewed: | 58 times | Topic: | Catalog | |
|
| In Catalog, randyf writes:
| I suggest adding names and titles that have "Type 1", "Type 2", etc. in them
to the project. Those terms are useless.
|
I completely agree.
But I also know from experience that bundling too many things in together is
not conducive to finishing things. So I may make this a separate project. One
way or the other, it is needed.
|
|
Author: | grimsbricksuk | Posted: | Feb 8, 2020 00:48 | Subject: | Inventory Change Request for Gear DScaseSW2 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Minifig {sw0201 Clone Trooper Clone Wars to sw1090 Clone Trooper Clone Wars - Anakin Head (DScaseSW2)}
|
|
Author: | axaday | Posted: | Feb 7, 2020 21:26 | Subject: | Re: February Roadmap Project: Old and New | Viewed: | 41 times | Topic: | Catalog | |
|
| In Catalog, dcarmine writes:
| According to the new standard for "difference types" the difference has to be
related to the way a part functions, not just cosmetic differences. So with
that rule, there would be only one entry for this hat.
|
I think there you are talking about run change things. Minor adjustments to
a mold to use less plastic or something that don't change its function at
all don't make "a difference". But a change of design on a hat makes it
a new hat.
|
|
Author: | mfav | Posted: | Feb 7, 2020 21:10 | Subject: | Re: February Roadmap Project: Old and New | Viewed: | 43 times | Topic: | Catalog | |
|
| In Catalog, dcarmine writes:
| I have about 98% of the Harry Potter sets if you want to use that for year of
change or verification on that hat. I'm willing to look at them and report
what I find.
|
I'm content to let the mad geniuses of catalog control sort out the catalog.
I'm just documenting the differences I can find in the handful of hats I
have.
Regardless of whatever else, the presence of the prong on some hats and the absence
on others I would think constitutes a different mold, and the supercollectors
may want to note the differences. But, again, I'm content to let the catmins
sort all that out.
If you want to get really crazy, the undersides of the brims also exhibit differences
under the magnifying glass. Some are smooth, some have a pebbled inner and outer
ring, some have an inner ring with parallel striations instead of pebbling, a
couple have a narrow band of striations in an otherwise smooth inner ring. The
subtleties are kind of endless.
For whatever it's worth, though, mine are:
Black 90460: fine pebbling overall
Black: smooth cone, pebbled brim, with prong,
Black: slightly pebbled cone, pebbled brim, with prong,
Blue, Purple, Green: slightly pebbled cone, definitely pebbled brim, with prong
Dark Green, Dark Green with dragon decoration: definitely pebbled cone and brim,
no prong
Tan: slightly pebbled cone, definitely pebbled brim, no prong
Light Purple: cone too beat up to tell if it's smooth or slightly pebbled,
definitely pebbled brim, with prong
The dark green ones and the 90460 are pretty much pristine; the others are old
and worn. Your mileage may vary.
My sample size is small, so additional data is probably warranted if the admins
want to try to make sense of it.
I just updated the hats page with closeups. Don't know if you saw that version
or the earlier no-closeups version.
My opinion otherwise though is that using renders instead of photographs for
the parts is misleading for the collector.
Did I mention: The page cannot be displayed because an internal server error
has occurred.
|
|
Author: | dcarmine | Posted: | Feb 7, 2020 19:55 | Subject: | Re: February Roadmap Project: Old and New | Viewed: | 50 times | Topic: | Catalog | |
|
| In Catalog, mfav writes:
According to the new standard for "difference types" the difference has to be
related to the way a part functions, not just cosmetic differences. So with
that rule, there would be only one entry for this hat.
I don't know if that rule applies to minifig categories, but I guess it depends
on how far down the "collector's details" rabbit hole you want to go. .
I have about 98% of the Harry Potter sets if you want to use that for year of
change or verification on that hat. I'm willing to look at them and report
what I find.
HTH
Donna
|
|
Author: | axaday | Posted: | Feb 7, 2020 19:10 | Subject: | Re: February Roadmap Project: Old and New | Viewed: | 44 times | Topic: | Catalog | |
|
| I reformatted a BUNCH of road signs with type 1 and type 2 bases. They should
perhaps be (xxxx / xxxx) like tire combinations?
In Catalog, randyf writes:
| I suggest adding names and titles that have "Type 1", "Type 2", etc. in them
to the project. Those terms are useless.
Cheers,
Randy
In Catalog, StormChaser writes:
| We are finally making serious headway with the catalog backlog. The catalog
change requests queue is cleared out.
In the spirit of trying to ensure that the Catalog Roadmap is not just something
to look at, I am continuing with the goal of moving through one project each
month. We have essentially had a January project (flesh to nougat) and there
is a new project starting today for February:
https://www.bricklink.com/help.asp?helpID=2476
What is this project?
This project involves accurately describing the differences between early (old)
versions of an item and later (new) versions. We need this for two reasons:
1. Using the words "old" and "new" were easy ways to avoid having to describe
actual differences between items. Set numbers in minifigure titles performed
the same function, which is why they were removed.
2. When a third version of an item appears, the old/new descriptors are useless.
Similar items should be described by their differences (usually the way in which
the later version is different from the earlier version).
There are around 500-1000 items expected to be affected by this project.
How can members contribute?
For the immediate moment, members may contribute by submitting title change requests.
I'm not sure how we're going to do item numbers yet, so hold off on
those. If you're not confident that you know exactly what this project entails
or need clarification on a specific issue, then please ask before submitting
a request.
For the immediate moment, ignore the additional topic bundled with this project
(looking at the use of with/without in titles). We may be able to include that,
or it may need to be made its own project. This project should also look at
the use of early/later descriptors since they serve the same function as the
terms old/new.
The goal is to wrap this up by the end of February. Of course, we also have
catalog work still to do and that takes precedence over projects - so this may
run over schedule.
|
|
|
|
Author: | randyf | Posted: | Feb 7, 2020 18:12 | Subject: | Re: February Roadmap Project: Old and New | Viewed: | 54 times | Topic: | Catalog | |
|
| I suggest adding names and titles that have "Type 1", "Type 2", etc. in them
to the project. Those terms are useless.
Cheers,
Randy
In Catalog, StormChaser writes:
| We are finally making serious headway with the catalog backlog. The catalog
change requests queue is cleared out.
In the spirit of trying to ensure that the Catalog Roadmap is not just something
to look at, I am continuing with the goal of moving through one project each
month. We have essentially had a January project (flesh to nougat) and there
is a new project starting today for February:
https://www.bricklink.com/help.asp?helpID=2476
What is this project?
This project involves accurately describing the differences between early (old)
versions of an item and later (new) versions. We need this for two reasons:
1. Using the words "old" and "new" were easy ways to avoid having to describe
actual differences between items. Set numbers in minifigure titles performed
the same function, which is why they were removed.
2. When a third version of an item appears, the old/new descriptors are useless.
Similar items should be described by their differences (usually the way in which
the later version is different from the earlier version).
There are around 500-1000 items expected to be affected by this project.
How can members contribute?
For the immediate moment, members may contribute by submitting title change requests.
I'm not sure how we're going to do item numbers yet, so hold off on
those. If you're not confident that you know exactly what this project entails
or need clarification on a specific issue, then please ask before submitting
a request.
For the immediate moment, ignore the additional topic bundled with this project
(looking at the use of with/without in titles). We may be able to include that,
or it may need to be made its own project. This project should also look at
the use of early/later descriptors since they serve the same function as the
terms old/new.
The goal is to wrap this up by the end of February. Of course, we also have
catalog work still to do and that takes precedence over projects - so this may
run over schedule.
|
|
|
Author: | axaday | Posted: | Feb 7, 2020 17:27 | Subject: | Re: February Roadmap Project: Old and New | Viewed: | 51 times | Topic: | Catalog | |
|
|
So like we would change this to "NBA Jason Kidd, Dark Blue Jersey Nets #5", right?
|
Author: | SezaR | Posted: | Feb 7, 2020 15:45 | Subject: | Inventory Change Request for Set 560-1 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part BA108pb01 Red Stickered Assembly 3 x 6 x 1 with Awning Pattern (Sticker) - Sets 376-2 and 560-1 - 1 Slope 33 3 x 4, 1 Slope 33 3 x 2 (Counterpart)
|
Author: | mfav | Posted: | Feb 7, 2020 15:45 | Subject: | Re: February Roadmap Project: Old and New | Viewed: | 67 times | Topic: | Catalog | |
|
| In Catalog, jennnifer writes:
| Sure! I'll play along...
I am not convinced that 90460 is really a new version of 6131.
|
I don't know which number to ascribe to which hat, but there are hat differences.
http://v4ei.com/brickref/wizard-hats.php
|
Author: | SezaR | Posted: | Feb 7, 2020 15:44 | Subject: | Inventory Change Request for Set 376-2 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part BA108pb01 Red Stickered Assembly 3 x 6 x 1 with Awning Pattern (Sticker) - Sets 376-2 and 560-1 - 1 Slope 33 3 x 4, 1 Slope 33 3 x 2 (Counterpart)
|
|
Author: | popsicle | Posted: | Feb 7, 2020 15:42 | Subject: | Re: February Roadmap Project: Old and New | Viewed: | 106 times | Topic: | Catalog | |
|
| In Catalog, jennnifer writes:
| Sure! I'll play along...
I am not convinced that 90460 is really a new version of 6131.
They look the same and LEGO uses the same thumbnail image for both. The small
image in Dark Green that I submitted for 90460 was back in the days before I
knew what I was doing. I cannot confirm the part number or what set it was from.
(I guess we all start somewhere!)
Anyway, I would like to see convincing side by side proof that they are significantly
different even if they have different mold numbers. I have not found any molded
with 90460. My Witch from Series 2 has been played with so I cannot confirm it
there either.
I am open to hearing any ideas or missing information about this!
|
I've got a question, Jen...
When are you going to arrive at the same conclusion that StormChaser already
has, that the BL catalog needs those like you (passion for, and knowledge of
the catalog process) and rejoin the team?
It is abundantly clear, that like Robert, you care and are impassioned about
BrickLink's catalog construction.
Consider with those already in place, and you (maybe a few others I can think
of) it would be the makings of a BL Catalog Dream Team.
|
|
Author: | Jan_K | Posted: | Feb 7, 2020 15:28 | Subject: | Inventory Change Request for Set 6255-1 | Viewed: | 33 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Book 102717US Pirate Comic - The Golden Medallion (102717-USA) (Alternate) (match ID 1)
Comments from Submitter:
US version of the set.
|
|
Author: | jennnifer | Posted: | Feb 7, 2020 15:10 | Subject: | Re: February Roadmap Project: Old and New | Viewed: | 82 times | Topic: | Catalog | |
|
| Sure! I'll play along...
I am not convinced that 90460 is really a new version of 6131.
They look the same and LEGO uses the same thumbnail image for both. The small
image in Dark Green that I submitted for 90460 was back in the days before I
knew what I was doing. I cannot confirm the part number or what set it was from.
(I guess we all start somewhere!)
Anyway, I would like to see convincing side by side proof that they are significantly
different even if they have different mold numbers. I have not found any molded
with 90460. My Witch from Series 2 has been played with so I cannot confirm it
there either.
I am open to hearing any ideas or missing information about this!
Thanks,
Jen
|
|
Author: | StormChaser | Posted: | Feb 7, 2020 14:45 | Subject: | February Roadmap Project: Old and New | Viewed: | 243 times | Topic: | Catalog | Status: | Open | |
|
| We are finally making serious headway with the catalog backlog. The catalog
change requests queue is cleared out.
In the spirit of trying to ensure that the Catalog Roadmap is not just something
to look at, I am continuing with the goal of moving through one project each
month. We have essentially had a January project (flesh to nougat) and there
is a new project starting today for February:
https://www.bricklink.com/help.asp?helpID=2476
What is this project?
This project involves accurately describing the differences between early (old)
versions of an item and later (new) versions. We need this for two reasons:
1. Using the words "old" and "new" were easy ways to avoid having to describe
actual differences between items. Set numbers in minifigure titles performed
the same function, which is why they were removed.
2. When a third version of an item appears, the old/new descriptors are useless.
Similar items should be described by their differences (usually the way in which
the later version is different from the earlier version).
There are around 500-1000 items expected to be affected by this project.
How can members contribute?
For the immediate moment, members may contribute by submitting title change requests.
I'm not sure how we're going to do item numbers yet, so hold off on
those. If you're not confident that you know exactly what this project entails
or need clarification on a specific issue, then please ask before submitting
a request.
For the immediate moment, ignore the additional topic bundled with this project
(looking at the use of with/without in titles). We may be able to include that,
or it may need to be made its own project. This project should also look at
the use of early/later descriptors since they serve the same function as the
terms old/new.
The goal is to wrap this up by the end of February. Of course, we also have
catalog work still to do and that takes precedence over projects - so this may
run over schedule.
|
|
Author: | saosivert | Posted: | Feb 7, 2020 13:34 | Subject: | Inventory Change Request for Set 70593-1 | Viewed: | 38 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 50950pb123 Dark Green Slope, Curved 3 x 1 with Scales and Gold Lion Head Pattern (Sticker) - Set 70593 (Counterpart)
|
Author: | Gp8871 | Posted: | Feb 7, 2020 12:54 | Subject: | Inventory Change Request for Set 75095-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 90498pb15 Black Tile 8 x 16 with Bottom Tubes with TIE/Ln Starfighter Pattern (Sticker) - Set 75095 (Counterpart)
|
|
Author: | randyf | Posted: | Feb 7, 2020 12:51 | Subject: | Re: 30374 Bar 1x4 Frosted Variant | Viewed: | 35 times | Topic: | Catalog | |
|
| In Catalog, mfav writes:
| In Catalog, Hygrotus writes:
| In Catalog, mfav writes:
I have also third variant 28697 not frosted. It looks like 30374 but has new
number molded on it. Checked under very high magnification.
|
...and an unnumbered version...
pic updated.
|
Yep. The original bars had no markings on them at all.
|
|
Author: | Gp8871 | Posted: | Feb 7, 2020 12:25 | Subject: | Re: Inventory Change Request for Set 75095-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, Gp8871 writes:
| Why was the request rejected?
|
I believe I've explained that. You can't add the part without a sticker
in the way you requested. However, the correct part that you submitted has been
approved to the catalog:
That one may be added to the set inventory.
|
I think i got it.
Will submit the part i created to the counterpart collection of the set.
|
|
Author: | mfav | Posted: | Feb 7, 2020 12:08 | Subject: | Re: 30374 Bar 1x4 Frosted Variant | Viewed: | 39 times | Topic: | Catalog | |
|
| In Catalog, Hygrotus writes:
| In Catalog, mfav writes:
I have also third variant 28697 not frosted. It looks like 30374 but has new
number molded on it. Checked under very high magnification.
|
...and an unnumbered version...
pic updated.
|
|
Author: | Hygrotus | Posted: | Feb 7, 2020 11:40 | Subject: | Re: 30374 Bar 1x4 Frosted Variant | Viewed: | 35 times | Topic: | Catalog | |
|
| In Catalog, Hygrotus writes:
| In Catalog, mfav writes:
I have also third variant 28697 not frosted. It looks like 30374 but has new
number molded on it. Checked under very high magnification.
|
P.S. with this new number 28697 there is also trans red, trans neon green and
trans purple
I have trans purple molded 28697 from this set
and it is not frosted.
Have no idea why only trans light blue is affected.
|
|
Author: | Hygrotus | Posted: | Feb 7, 2020 11:36 | Subject: | Re: 30374 Bar 1x4 Frosted Variant | Viewed: | 38 times | Topic: | Catalog | |
|
| In Catalog, mfav writes:
I have also third variant 28697 not frosted. It looks like 30374 but has new
number molded on it. Checked under very high magnification.
|
|
|
Author: | pikachu3 | Posted: | Feb 7, 2020 10:51 | Subject: | Re: 30374 Bar 1x4 Frosted Variant | Viewed: | 36 times | Topic: | Catalog | |
|
| In Catalog, Brick.Door writes:
| Found some frosted trans-light-blue 1x4 bars in a set recently and I'm not
comfortable mixing them with my current inventory. They are quite different and
I don't think a customer who orders several would be happy getting a mixture.
The additional notes state:
"Alternate item number 28697 is used for transparent colors. This mold variant
has no bubbles and number 28697 molded on it. It has been found in two variations
clear and frosted as showed on additional images."
So it seems the catalog admins are aware of the difference and have decided not
to reflect it in the catalog here? Personally I think this is a mold variation
worth recognizing.
|
I agree. I had about 4000 of the old kind, and went to the Lego store to get
1000 more to finish a MOC. They only had the new frosted kind, which would look
very out of place next to the ones I already had, so I had to find them elsewhere.
For sellers, these should be easy to separate. I'd also like to see the rounded
vs. flat ends separated in the catalog but that may be more difficult
|
|
Author: | Brick.Door | Posted: | Feb 7, 2020 10:39 | Subject: | 30374 Bar 1x4 Frosted Variant | Viewed: | 84 times | Topic: | Catalog | Status: | Open | |
|
| Found some frosted trans-light-blue 1x4 bars in a set recently and I'm not
comfortable mixing them with my current inventory. They are quite different and
I don't think a customer who orders several would be happy getting a mixture.
The additional notes state:
"Alternate item number 28697 is used for transparent colors. This mold variant
has no bubbles and number 28697 molded on it. It has been found in two variations
clear and frosted as showed on additional images."
So it seems the catalog admins are aware of the difference and have decided not
to reflect it in the catalog here? Personally I think this is a mold variation
worth recognizing.
|
|
Author: | rick_holl | Posted: | Feb 7, 2020 09:08 | Subject: | Re: The 6x6 tiles in 10227 B-Wing | Viewed: | 35 times | Topic: | Catalog | |
|
| In Catalog, randyf writes:
| In Catalog, rick_holl writes:
| Anyone knows if those tiles are flat or they have a shiny finish?
Thank you
|
6 x 6 tiles have a matte finish.
Cheers,
Randy
|
Thank you Randy!
|
Author: | Hygrotus | Posted: | Feb 7, 2020 07:32 | Subject: | Inventory Change Request for Set 9496-1 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3626cpb0749 Reddish Brown Minifigure, Head Moustache Thin Split, Smile, Eyebrows, Eyes with White Pupils Pattern (SW Lando) - Hollow Stud (Alternate) (match ID 5)
Comments from Submitter:
Please also add a note to
This minifigure has been found with both the 'b' and 'c' style head.
|
|
Author: | doolallytap | Posted: | Feb 7, 2020 06:42 | Subject: | Re: Identifying minifigures | Viewed: | 32 times | Topic: | Catalog | |
|
| Identify the torso assembly and then you can see which minifigs it is part of
in the 'item appears in' look up the minifigs that it relates to, then
part out that minif and you will see all the parts required.
|
|
Author: | Hygrotus | Posted: | Feb 7, 2020 01:20 | Subject: | Inventory Change Request for Set 41403-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 64454pb01 Lime Container, Box 3 x 8 x 6 2/3 Half Back with Towel, Bottles, Stethoscope, Leash and Collar Pattern (Sticker) - Set 41403 (Counterpart)
* Add 1 Part 15210pb058 Dark Bluish Gray Road Sign Clip-On 2 x 2 Square Open O Clip with Bunny on Orange Square Pattern (Sticker) - Set 41403 (Counterpart)
* Add 1 Part 85984pb240 Light Aqua Slope 30 1 x 2 x 2/3 with Dark Azure Gauge Pattern (Sticker) - Set 41403 (Counterpart)
|
|
Author: | randyf | Posted: | Feb 6, 2020 22:03 | Subject: | Re: Inventory Change Request for Set 4484-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, ZwarteMagica writes:
| Please make changes to the following inventory:
* Change 1 Part Black 2609b Magnet Holder Tile 2 x 2 - Tall Arms with Deep Notch {Regular to Extra}
* Change 2 Part Light Gray 4032 Plate, Round 2 x 2 with Axle Hole {Regular to Extra}
Comments from Submitter:
Since the 4871, 4854 and 6636 are extra items, I assume those parts also need to be listed as extra`s. Since they are also exclusive used in the cross over model.
|
According to BrickLink inventory guidelines, in the absence of an official parts
list for a set, the official part count on the set packaging can be used to determine
as closely as possible the contents of the Regular Items section of the set inventory:
https://www.bricklink.com/help.asp?helpID=1562
Since the official part count on the packaging for this set is 76 pieces, all
of the parts included in this set to be used to build the mini TIE bomber are
Regular Items.
Therefore, these requests will not be accepted, and I will adjust the inventory
manually to account for the required changes.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Feb 6, 2020 20:58 | Subject: | Re: Inventory Change Request for Set 75236-1 | Viewed: | 27 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, toontexas writes:
| Please make changes to the following inventory:
* Add 1 Part 87083 Dark Bluish Gray Technic, Axle 4 with Stop (Alternate) (match ID 1)
Comments from Submitter:
I parted out two sets. One set had a red axle 3703 plus a dbg axle 87083, the other set had only two dbg axles 87083 (no red axle).
|
The set requires one
and two
as shown on pages 35, 50, and 55 of the instructions as well as in the official
parts list.
Since the quantity of these parts is correct in the inventory, this request will
not be accepted.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Feb 6, 2020 20:19 | Subject: | Re: Inventory Change Request for Part spa0010 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Gemini343 writes:
| Please make changes to the following inventory:
* Change {4 to 5} Part Dark Green 3023 Plate 1 x 2
Comments from Submitter:
According to the picture and instructions there should be two per leg and one on the torso.
|
Thank you for finding this error!
Instead of the fifth
there is a misplaced
in the inventory.
I have accepted this request and made the additional change manually.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Feb 6, 2020 18:16 | Subject: | Re: The 6x6 tiles in 10227 B-Wing | Viewed: | 55 times | Topic: | Catalog | |
|
| In Catalog, rick_holl writes:
| Anyone knows if those tiles are flat or they have a shiny finish?
Thank you
|
6 x 6 tiles have a matte finish.
Cheers,
Randy
|
Author: | rick_holl | Posted: | Feb 6, 2020 16:52 | Subject: | The 6x6 tiles in 10227 B-Wing | Viewed: | 104 times | Topic: | Catalog | Status: | Open | |
|
| Anyone knows if those tiles are flat or they have a shiny finish?
Thank you
|
Author: | apple_brick | Posted: | Feb 6, 2020 06:19 | Subject: | Re: catalogue problem - zero lots showing up | Viewed: | 54 times | Topic: | Catalog | |
|
| | | It may have to do with the software they use to upload and sync their inventory.
This shouldn't be possible, however. Zero QTY lots should only be retained
in a stockroom.
|
|
Hi Russelm
All our zero qty lots are in stockroom. So seems like a BL bug.
|
|
Author: | apple_brick | Posted: | Feb 6, 2020 06:10 | Subject: | Re: catalogue problem - zero lots showing up | Viewed: | 42 times | Topic: | Catalog | |
|
| Hi Russell,
Someone just pointed me to this topic, which i never saw earlier.
Can this be the reason that lots are 'disappearing' from our inventory?
That would be a bad thing to do i think. Can you confirm this?
Today i noticed a lot of older regular items have been removed / or renewed with
a different Lot Id. That's causing issues on our side.
Maybee you can contact us, so we can discuss this?
Regards,
Rick
|
|
Author: | FreeStorm | Posted: | Feb 6, 2020 06:07 | Subject: | Inventory Change Request for Set 7760-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* | | 7760-1 (Inv) Electric Diesel Locomotive (Diesel Shunter Locomotive) 144 Parts, 2 Minifigures, 1980 Sets: Train: 12V |
* Change {1 to 2} Part Blue 3004pb033 Brick 1 x 2 with White '7760' Pattern (Sticker) - Set 7760 (Counterpart)
Comments from Submitter:
Add another part for right side of the locomotive.
|
|
Author: | StormChaser | Posted: | Feb 6, 2020 03:44 | Subject: | Re: Correction sheet for set 8847 | Viewed: | 33 times | Topic: | Catalog | |
|
| In Catalog, anathema writes:
| The same applies to set 8843, too - I have the supplemental sheet (which I'll
add in the next few days when I get it scanned) and the updated version of the
instructions.
|
BrickLink does not have any record in the inventory of this set of a redesign.
However, I have added a note to the instructions anyway:
You might see about updating the set inventory when you get a minute.
|
|
Author: | anathema | Posted: | Feb 6, 2020 03:39 | Subject: | Re: Correction sheet for set 8847 | Viewed: | 30 times | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| In Catalog, anathema writes:
| Could you also add a note to say that there are two versions of the instruction
booklet too, please? The booklet was updated to incorporate the changes from
the supplemental sheet.
|
Well . . . okay. You talked me into it. You have your note.
|
Thanks!
The same applies to set 8843, too - I have the supplemental sheet (which I'll
add in the next few days when I get it scanned) and the updated version of the
instructions.
|
|
Author: | StormChaser | Posted: | Feb 6, 2020 03:11 | Subject: | Re: Correction sheet for set 8847 | Viewed: | 34 times | Topic: | Catalog | |
|
| In Catalog, anathema writes:
| Could you also add a note to say that there are two versions of the instruction
booklet too, please? The booklet was updated to incorporate the changes from
the supplemental sheet.
|
Well . . . okay. You talked me into it. You have your note.
|
|
Author: | anathema | Posted: | Feb 6, 2020 03:05 | Subject: | Re: Correction sheet for set 8847 | Viewed: | 37 times | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| In Catalog, Adjour writes:
| The old dragster set has a white correction sheet for step 16. It has a part
number on the page that doesn't show up in searches (120356).
Am I missing the entry somewhere? If not, should an entry exist? Or a note with
the instructions entry? (I could have sworn I had seen a note about this previously...)
Thanks!!
|
The inventory does show that the set was redesigned during production. Please
upload a scan of the correction sheet to the instruction entry for the set and
we'll add it as an alternate image.
|
Could you also add a note to say that there are two versions of the instruction
booklet too, please? The booklet was updated to incorporate the changes from
the supplemental sheet.
|
|
Author: | Adjour | Posted: | Feb 6, 2020 00:51 | Subject: | Re: Correction sheet for set 8847 | Viewed: | 35 times | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| In Catalog, Adjour writes:
| The old dragster set has a white correction sheet for step 16. It has a part
number on the page that doesn't show up in searches (120356).
Am I missing the entry somewhere? If not, should an entry exist? Or a note with
the instructions entry? (I could have sworn I had seen a note about this previously...)
Thanks!!
|
The inventory does show that the set was redesigned during production. Please
upload a scan of the correction sheet to the instruction entry for the set and
we'll add it as an alternate image.
|
Sweet! Its late here, so I'll see what I can do tomorrow.
Thanks!!
|
|
Author: | StormChaser | Posted: | Feb 6, 2020 00:40 | Subject: | Re: Correction sheet for set 8847 | Viewed: | 34 times | Topic: | Catalog | |
|
| In Catalog, Adjour writes:
| The old dragster set has a white correction sheet for step 16. It has a part
number on the page that doesn't show up in searches (120356).
Am I missing the entry somewhere? If not, should an entry exist? Or a note with
the instructions entry? (I could have sworn I had seen a note about this previously...)
Thanks!!
|
The inventory does show that the set was redesigned during production. Please
upload a scan of the correction sheet to the instruction entry for the set and
we'll add it as an alternate image.
|
|
Author: | Adjour | Posted: | Feb 6, 2020 00:36 | Subject: | Correction sheet for set 8847 | Viewed: | 80 times | Topic: | Catalog | Status: | Open | |
|
| The old dragster set has a white correction sheet for step 16. It has a part
number on the page that doesn't show up in searches (120356).
Am I missing the entry somewhere? If not, should an entry exist? Or a note with
the instructions entry? (I could have sworn I had seen a note about this previously...)
Thanks!!
|
Author: | JustBricks | Posted: | Feb 5, 2020 18:28 | Subject: | Inventory Change Request for Part spa0010 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {4 to 5} Part Dark Green 3023 Plate 1 x 2
Comments from Submitter:
According to the picture and instructions there should be two per leg and one on the torso.
|
|
Author: | popsicle | Posted: | Feb 5, 2020 18:23 | Subject: | Re: Shadow Trooper | Viewed: | 70 times | Topic: | Catalog | |
|
| In Catalog, mhortar writes:
| In Catalog, popsicle writes:
| In Catalog, Hygrotus writes:
|
Interesting, more than ten years and almost nobody noticed it.
|
People noticed...
With respect to you personally Marek, for myself and let’s say a group
of Lego Star Wars Collectors that collaborate, we’ve stopped attempts to correct
or add to the BL catalog some years back, when our continued efforts were rejected
or dismissed out of hand, by those placed into those positions at the time, that
could do just that without consideration.
There’s more than a few corrections needed to the Stars Wars portion of the BL
catalog. It’s too bad, such poor judgement in personnel had been used in the
past. Now, some in the know (through painstaking research) that had once cared,
don’t.
That’s all that I would like to say, but should not! While simultaneously
disavowing that which I would like to say, and shouldn't - How’s that
for equivocating
On a serious note, good job, Marek! Now to the next, there’s plenty You are
invaluable to the current catalog team, IMHO of course.
|
If you know that the current catalog admins are open to investigating and adding
these minifigs and you have knowledge of other minifigs that need to be corrected,
would you be willing to re-share that information with the current admins so
that the catalog can be more accurate?
|
Sure, Josh, I could and would for the current admin. In my book they are the
best we've seen here. Truly gifted and dedicated people, with strong guidance
from Russell.
But let me ask you, why is it needed? Given that TLG are in possession of the
site and it's catalog's information. They can spin whatever yarn they'd
like. In other words, get it straight from the horse's mouth. It's a
gift for you purest, if played right.
|
|
Author: | mhortar | Posted: | Feb 5, 2020 17:58 | Subject: | Re: Shadow Trooper | Viewed: | 35 times | Topic: | Catalog | |
|
| In Catalog, popsicle writes:
| In Catalog, Hygrotus writes:
|
Interesting, more than ten years and almost nobody noticed it.
|
People noticed...
With respect to you personally Marek, for myself and let’s say a group
of Lego Star Wars Collectors that collaborate, we’ve stopped attempts to correct
or add to the BL catalog some years back, when our continued efforts were rejected
or dismissed out of hand, by those placed into those positions at the time, that
could do just that without consideration.
There’s more than a few corrections needed to the Stars Wars portion of the BL
catalog. It’s too bad, such poor judgement in personnel had been used in the
past. Now, some in the know (through painstaking research) that had once cared,
don’t.
That’s all that I would like to say, but should not! While simultaneously
disavowing that which I would like to say, and shouldn't - How’s that
for equivocating
On a serious note, good job, Marek! Now to the next, there’s plenty You are
invaluable to the current catalog team, IMHO of course.
|
If you know that the current catalog admins are open to investigating and adding
these minifigs and you have knowledge of other minifigs that need to be corrected,
would you be willing to re-share that information with the current admins so
that the catalog can be more accurate?
Josh
|
|
Author: | jblock | Posted: | Feb 5, 2020 17:25 | Subject: | Inventory Change Request for Set 1846-1 | Viewed: | 34 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 4744px6 Yellow Brick, Modified 2 x 4 x 2 Double Curved Top with Lion Face Pattern
* Change {1 to 2} Part Yellow 4744px11 Brick, Modified 2 x 4 x 2 Double Curved Top with Tiger Face Pattern
Comments from Submitter:
Based on picture of the polybag, both decorated 4744 parts should be the "tiger face" brick with whiskers on the decoration (the "lion face" brick decoration has no whiskers).
|
|
Author: | cosmicray | Posted: | Feb 5, 2020 17:23 | Subject: | Re: Nougat is the new Flesh | Viewed: | 89 times | Topic: | Colors | |
|
| In Colors, yapke writes:
| Hello,
It's remarkable quit now, about the Nougat colours!
With all do of respect and comprehension about the decision to change the name
from Flesh to Nougat...
I didn't follow all those threads and discussions/remark, some were so funny
I couldn't stop laugh about it...
But I assume it has to be one of the most controversial and humorous decision
made by BrickLink or Lego, isn't it?
Anyway, we can presume that most BL members have accepted (or learned to deal
with it) the name change of the colour!
Now is the question: which colour next ???
Greetings, Yannick
|
The group of color names 'flesh' were purely constructs that BL came
up with. THe 'nougat' family of names has been available in the LEGO
community, since at least 2011, when TLG gave to Peeron a reasonably accurate
list (as of that point in time). Now, having said that, before anyone knew the
names should have been 'nougat', BL began to coin color names, and this
likely began about 2003, when certain NBA minifigures came out with what appeared
to be flesh like shade of ABS. Having not seen much of this before, BL created
their own name(s). Soon thereafter, some of the HP minifigs transitioned from
basic yellow to flesh like shades.
What is happening here, is to steer the BL color inventory to align with other
sites, and (in the case of Earth Orange) to untangle errors that were being perpetuated
by a lack of clear information at BL.
IMHO, it's for the greater good, and people need to recognize that.
Nita Rae
|
|
Author: | yapke | Posted: | Feb 5, 2020 16:19 | Subject: | Re: Nougat is the new Flesh | Viewed: | 56 times | Topic: | Colors | |
|
| In Colors, manganschlamm writes:
| In Colors, yapke writes:
| In Colors, qwertyboy writes:
|
I wouldn't mind if these types of replies resulted in a formal warning.
Niek.
|
Do you mean I said something wrong in my reply to the thread ???
Please, tell me. Cause I personally don't know what I said wrong.
I said I respect and understand the made decision (the why or the reason) and
why they chose Nougat as reference.
But at looking to or reading all those threads and discussions, I've concluded
that the decision is controversial, and in some people's mind humorous (if
you've got a little sens for humour).
Greetings, Yannick
|
I think he referred to the reply to your message, not to your message.
|
Oh yes, now I see.
... Rude reply of Dino1!
|
|
Author: | manganschlamm | Posted: | Feb 5, 2020 15:45 | Subject: | Re: Nougat is the new Flesh | Viewed: | 70 times | Topic: | Colors | |
|
| In Colors, yapke writes:
| In Colors, qwertyboy writes:
|
I wouldn't mind if these types of replies resulted in a formal warning.
Niek.
|
Do you mean I said something wrong in my reply to the thread ???
Please, tell me. Cause I personally don't know what I said wrong.
I said I respect and understand the made decision (the why or the reason) and
why they chose Nougat as reference.
But at looking to or reading all those threads and discussions, I've concluded
that the decision is controversial, and in some people's mind humorous (if
you've got a little sens for humour).
Greetings, Yannick
|
I think he referred to the reply to your message, not to your message.
|
|
Author: | yapke | Posted: | Feb 5, 2020 15:42 | Subject: | Re: Nougat is the new Flesh | Viewed: | 58 times | Topic: | Colors | |
|
| In Colors, qwertyboy writes:
|
I wouldn't mind if these types of replies resulted in a formal warning.
Niek.
|
Do you mean I said something wrong in my reply to the thread ???
Please, tell me. Cause I personally don't know what I said wrong.
I said I respect and understand the made decision (the why or the reason) and
why they chose Nougat as reference.
But at looking to or reading all those threads and discussions, I've concluded
that the decision is controversial, and in some people's mind humorous (if
you've got a little sens for humour).
Greetings, Yannick
|
|
Author: | popsicle | Posted: | Feb 5, 2020 15:14 | Subject: | Re: Shadow Trooper | Viewed: | 58 times | Topic: | Catalog | |
|
| In Catalog, Hygrotus writes:
| In Catalog, popsicle writes:
| In Catalog, Hygrotus writes:
|
Interesting, more than ten years and almost nobody noticed it.
|
People noticed...
With respect to you personally Marek, for myself and let’s say a group
of Lego Star Wars Collectors that collaborate, we’ve stopped attempts to correct
or add to the BL catalog some years back, when our continued efforts were rejected
or dismissed out of hand, by those placed into those positions at the time, that
could do just that without consideration.
There’s more than a few corrections needed to the Stars Wars portion of the BL
catalog. It’s too bad, such poor judgement in personnel had been used in the
past. Now, some in the know (through painstaking research) that had once cared,
don’t.
That’s all that I would like to say, but should not! While simultaneously
disavowing that which I would like to say, and shouldn't - How’s that
for equivocating
On a serious note, good job, Marek! Now to the next, there’s plenty You are
invaluable to the current catalog team, IMHO of course.
|
Thank you
Some of them ar know just not yet distinguished and they are here
https://www.bricklink.com/help.asp?helpID=2488
under paragraph
Known Print Variants Not Distinguished
some examples
there are notes about them in the catalog
but in this case there wasn't even a note about it.
|
Interesting choices to start with, Marek!
Nonetheless, as to your first example: the full triangle is the anomaly. It was
initially intended as full triangle but as production produced a flawed triangle,
it was quickly corrected (wrongly in some minds) to the commonly seen trapezoid
shape. So, what’s the norm? I couldn’t say, it’s a matter of perspective. However,
the quantity of fully 'faulty' triangle produced, is far less than that
of the corrected trapezoid version.
|
|
Author: | qwertyboy | Posted: | Feb 5, 2020 14:27 | Subject: | Re: Nougat is the new Flesh | Viewed: | 84 times | Topic: | Colors | |
|
| In Colors, Dino1 writes:
| In Colors, yapke writes:
| Hello,
It's remarkable quit now, about the Nougat colours!
With all do of respect and comprehension about the decision to change the name
from Flesh to Nougat...
I didn't follow all those threads and discussions/remark, some were so funny
I couldn't stop laugh about it...
But I assume it has to be one of the most controversial and humorous decision
made by BrickLink or Lego, isn't it?
Anyway, we can presume that most BL members have accepted (or learned to deal
with it) the name change of the colour!
Now is the question: which colour next ???
Greetings, Yannick
|
Do you know North Korea?
The same is here. Do not say anything against a decision by the Admins!
|
I wouldn't mind if these types of replies resulted in a formal warning.
Niek.
|
|
Author: | Hygrotus | Posted: | Feb 5, 2020 14:14 | Subject: | Re: Shadow Trooper | Viewed: | 37 times | Topic: | Catalog | |
|
| In Catalog, popsicle writes:
| In Catalog, Hygrotus writes:
|
Interesting, more than ten years and almost nobody noticed it.
|
People noticed...
With respect to you personally Marek, for myself and let’s say a group
of Lego Star Wars Collectors that collaborate, we’ve stopped attempts to correct
or add to the BL catalog some years back, when our continued efforts were rejected
or dismissed out of hand, by those placed into those positions at the time, that
could do just that without consideration.
There’s more than a few corrections needed to the Stars Wars portion of the BL
catalog. It’s too bad, such poor judgement in personnel had been used in the
past. Now, some in the know (through painstaking research) that had once cared,
don’t.
That’s all that I would like to say, but should not! While simultaneously
disavowing that which I would like to say, and shouldn't - How’s that
for equivocating
On a serious note, good job, Marek! Now to the next, there’s plenty You are
invaluable to the current catalog team, IMHO of course.
|
Thank you
Some of them ar know just not yet distinguished and they are here
https://www.bricklink.com/help.asp?helpID=2488
under paragraph
Known Print Variants Not Distinguished
some examples
there are notes about them in the catalog
but in this case there wasn't even a note about it.
|
|
Author: | popsicle | Posted: | Feb 5, 2020 14:04 | Subject: | Re: Shadow Trooper | Viewed: | 54 times | Topic: | Catalog | |
|
| In Catalog, Hygrotus writes:
|
Interesting, more than ten years and almost nobody noticed it.
|
People noticed...
With respect to you personally Marek, for myself and let’s say a group
of Lego Star Wars Collectors that collaborate, we’ve stopped attempts to correct
or add to the BL catalog some years back, when our continued efforts were rejected
or dismissed out of hand, by those placed into those positions at the time, that
could do just that without consideration.
There’s more than a few corrections needed to the Stars Wars portion of the BL
catalog. It’s too bad, such poor judgement in personnel had been used in the
past. Now, some in the know (through painstaking research) that had once cared,
don’t.
That’s all that I would like to say, but should not! While simultaneously
disavowing that which I would like to say, and shouldn't - How’s that
for equivocating
On a serious note, good job, Marek! Now to the next, there’s plenty You are
invaluable to the current catalog team, IMHO of course.
|
|
Author: | Dino | Posted: | Feb 5, 2020 13:52 | Subject: | Re: Nougat is the new Flesh | Viewed: | 80 times | Topic: | Colors | |
|
| In Colors, yapke writes:
| Hello,
It's remarkable quit now, about the Nougat colours!
With all do of respect and comprehension about the decision to change the name
from Flesh to Nougat...
I didn't follow all those threads and discussions/remark, some were so funny
I couldn't stop laugh about it...
But I assume it has to be one of the most controversial and humorous decision
made by BrickLink or Lego, isn't it?
Anyway, we can presume that most BL members have accepted (or learned to deal
with it) the name change of the colour!
Now is the question: which colour next ???
Greetings, Yannick
|
Do you know North Korea?
The same is here. Do not say anything against a decision by the Admins!
|
|
Author: | StormChaser | Posted: | Feb 5, 2020 13:44 | Subject: | Re: Identifying minifigures | Viewed: | 37 times | Topic: | Catalog | |
|
| In Help, manganschlamm writes:
| When I searched for the term "flesh", the search returned only custom parts.
So it appears that at least the descriptions of the legit parts have been updated.
|
Yes, as the Catalog Roadmap shows, this project is now complete:
https://www.bricklink.com/help.asp?helpID=2476
|
Author: | manganschlamm | Posted: | Feb 5, 2020 13:38 | Subject: | Re: Identifying minifigures | Viewed: | 30 times | Topic: | Catalog | |
|
| In Help, mfav writes:
| In Help, Stonemonkey1974 writes:
Note "nougat/flesh" hasn't been updated since the apocalypse, and Anders
is away for a week.
|
When I searched for the term "flesh", the search returned only custom parts.
So it appears that at least the descriptions of the legit parts have been updated.
|
Author: | Stonemonkey1974 | Posted: | Feb 5, 2020 13:16 | Subject: | Re: Identifying minifigures | Viewed: | 36 times | Topic: | Catalog | |
|
| In Help, mfav writes:
| In Help, Stonemonkey1974 writes:
Note "nougat/flesh" hasn't been updated since the apocalypse, and Anders
is away for a week.
|
Good point, thx.
The NOUGPOCALYPSE!!!
|
Author: | Hygrotus | Posted: | Feb 5, 2020 13:12 | Subject: | Inventory Change Request for Set 7667-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Minifig {sw0166 Shadow Trooper to sw0166a Shadow Trooper - Short Line on Back}
Comments from Submitter:
Only this one set I can confirm from my own set never mixed.
https://www.bricklink.com/message.asp?ID=1178937
|
Author: | mfav | Posted: | Feb 5, 2020 13:12 | Subject: | Re: Identifying minifigures | Viewed: | 38 times | Topic: | Catalog | |
|
| In Help, Stonemonkey1974 writes:
Note "nougat/flesh" hasn't been updated since the apocalypse, and Anders
is away for a week.
|
Author: | Stonemonkey1974 | Posted: | Feb 5, 2020 13:09 | Subject: | Re: Identifying minifigures | Viewed: | 32 times | Topic: | Catalog | |
|
| Try
http://avbricks.no/#/avSearch
In Help, Grinjer1 writes:
| I have a batch of incomplete minifigures. I need help identifying them to find
out what parts I need to complete them. I seem to remember there were a couple
of sites which had this information but I can't remember the names.
Can anyone help please?
|
|
Author: | Hygrotus | Posted: | Feb 5, 2020 13:09 | Subject: | Re: Shadow Trooper | Viewed: | 32 times | Topic: | Catalog | |
|
| In Catalog, Quba writes:
| Dobry jesteś!
|
Thanks
|
Author: | Grinjer1 | Posted: | Feb 5, 2020 13:06 | Subject: | Identifying minifigures | Viewed: | 73 times | Topic: | Catalog | Status: | Open | |
|
| I have a batch of incomplete minifigures. I need help identifying them to find
out what parts I need to complete them. I seem to remember there were a couple
of sites which had this information but I can't remember the names.
Can anyone help please?
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|