Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | dcarmine | Posted: | Jan 12, 2020 15:25 | Subject: | Another inconsistency | Viewed: | 163 times | Topic: | Catalog | Status: | Open | |
|
| Inconsistency is a pet peeve of my, so you know it's my last nerve on this
issue.
I haven't parted out much lately, but I got an opportunity to part out 3
of the 2019 Star Wars Advent Calendars
For the last 9 years TLC has included a Winter-ized SW figure in the 24th position
on the calendar. I saw that this last year was a Porg Santa. I didn't look
at the BL inventory to see how the subsets were being handled before I started.
I wanted to preserve the Porg Santa as a complete fig and part out all the other
"parts only" droids.
After finishing the sorting, I went to upload the part-out to BL. And that's
when I found it....Porg Santa was a part out...grrr. But the Gonk and Mouse
droids were left to sell whole...grrrr.
Who decides this stuff? How hard is it to be more consistent? I know there
is a lot of discussion about "What SW Droids are figures" and what are not.
But geesse, SMH.
Just my two cents.
Thanks for reading, no changes are expected.
Donna
|
|
Author: | TakeAbricK | Posted: | Jan 12, 2020 01:01 | Subject: | Re: catalogue problem - zero lots showing up | Viewed: | 45 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| In Catalog, BasKrie writes:
| In Catalog, Brickwilbo writes:
| In Catalog, Yogi_007 writes:
| Hi All,
Ive been looking for through the catalogue for various parts and have found that
some lots are coming up as zero available but still showing up for sale.
I was looking at 3700 technic 1x2 brick in dark green last week and the stores
showed up with zero in stock in the catalogue. I checked again today and all
resolved.
I then looked at orange part 6005 and same thing.
Whats going on ??
Seems off to me or is it related to these rarer parts ?
Help please
Yogi
|
The item doesn't show up in the items for sale.
I guess the Price Guide isn't shown in Real Time.
Maybe the items are in void of the payment process.
|
The items do show up in the items for sale
New (0) AFOL Supply (47562)
Netherlands
Min Buy: None EUR 7.21
(EUR 7.21)
New (0) Kentuckiana Bricks (27276)
USA
Min Buy: None EUR 5.86
(US $6.52)
These to sellers have a lot of zero quantity items.
It came up before in the forum (https://www.bricklink.com/messageThread.asp?ID=260269)
|
It may have to do with the software they use to upload and sync their inventory.
This shouldn't be possible, however. Zero QTY lots should only be retained
in a stockroom.
|
And since it's one and the same company, they have the same software, which
probably sync both inventories at the same time.
|
|
|
Author: | Yogi_007 | Posted: | Jan 11, 2020 21:01 | Subject: | Re: catalogue problem - zero lots showing up | Viewed: | 37 times | Topic: | Catalog | |
|
| | Ive been looking for through the catalogue for various parts and have found that
| some lots are coming up as zero available but still showing up for sale.
I was looking at 3700 technic 1x2 brick in dark green last week and the stores
showed up with zero in stock in the catalogue. I checked again today and all
resolved.
I then looked at orange part 6005 and same thing.
Whats going on ??
Seems off to me or is it related to these rarer parts ?
Help please
Yogi
|
Some statistics of average price, total sold, total available et cetera are calculated
during the daily maintenance and hence may differ slightly from the actual items
for sale. This especially shows for rare items that have just been sold or added
to inventories.
|
Ive just checked the same part again today and same issue. So its not the updating
of daily maintenance.
Admin - another bug ?
Yogi
|
|
Author: | Vosblokjes | Posted: | Jan 11, 2020 06:17 | Subject: | Re: catalogue problem - zero lots showing up | Viewed: | 41 times | Topic: | Catalog | |
|
| In Catalog, Brickwilbo writes:
| In Catalog, Yogi_007 writes:
| Hi All,
Ive been looking for through the catalogue for various parts and have found that
some lots are coming up as zero available but still showing up for sale.
I was looking at 3700 technic 1x2 brick in dark green last week and the stores
showed up with zero in stock in the catalogue. I checked again today and all
resolved.
I then looked at orange part 6005 and same thing.
Whats going on ??
Seems off to me or is it related to these rarer parts ?
Help please
Yogi
|
The item doesn't show up in the items for sale.
I guess the Price Guide isn't shown in Real Time.
Maybe the items are in void of the payment process.
|
The items do show up in the items for sale
New (0) AFOL Supply (47562)
Netherlands
Min Buy: None EUR 7.21
(EUR 7.21)
New (0) Kentuckiana Bricks (27276)
USA
Min Buy: None EUR 5.86
(US $6.52)
These to sellers have a lot of zero quantity items.
It came up before in the forum (https://www.bricklink.com/messageThread.asp?ID=260269)
|
|
Author: | hpoort | Posted: | Jan 11, 2020 06:09 | Subject: | Re: catalogue problem - zero lots showing up | Viewed: | 37 times | Topic: | Catalog | |
|
| In Catalog, Yogi_007 writes:
| Hi All,
Ive been looking for through the catalogue for various parts and have found that
some lots are coming up as zero available but still showing up for sale.
I was looking at 3700 technic 1x2 brick in dark green last week and the stores
showed up with zero in stock in the catalogue. I checked again today and all
resolved.
I then looked at orange part 6005 and same thing.
Whats going on ??
Seems off to me or is it related to these rarer parts ?
Help please
Yogi
|
Some statistics of average price, total sold, total available et cetera are calculated
during the daily maintenance and hence may differ slightly from the actual items
for sale. This especially shows for rare items that have just been sold or added
to inventories.
|
|
Author: | Brickwilbo | Posted: | Jan 11, 2020 05:44 | Subject: | Re: catalogue problem - zero lots showing up | Viewed: | 32 times | Topic: | Catalog | |
|
| In Catalog, Yogi_007 writes:
| Hi All,
Ive been looking for through the catalogue for various parts and have found that
some lots are coming up as zero available but still showing up for sale.
I was looking at 3700 technic 1x2 brick in dark green last week and the stores
showed up with zero in stock in the catalogue. I checked again today and all
resolved.
I then looked at orange part 6005 and same thing.
Whats going on ??
Seems off to me or is it related to these rarer parts ?
Help please
Yogi
|
The item doesn't show up in the items for sale.
I guess the Price Guide isn't shown in Real Time.
Maybe the items are in void of the payment process.
|
|
Author: | Yogi_007 | Posted: | Jan 11, 2020 05:30 | Subject: | catalogue problem - zero lots showing up | Viewed: | 87 times | Topic: | Catalog | Status: | Open | |
|
| Hi All,
Ive been looking for through the catalogue for various parts and have found that
some lots are coming up as zero available but still showing up for sale.
I was looking at 3700 technic 1x2 brick in dark green last week and the stores
showed up with zero in stock in the catalogue. I checked again today and all
resolved.
I then looked at orange part 6005 and same thing.
Whats going on ??
Seems off to me or is it related to these rarer parts ?
Help please
Yogi
|
|
|
Author: | axaday | Posted: | Jan 10, 2020 16:50 | Subject: | Re: Element 6286835 wrong colour | Viewed: | 57 times | Topic: | Catalog | |
|
| In Catalog, Duq writes:
| Element 6286835 is 28870 in black, not medium azure.
|
Stormchaser requested the change. I confirm from my instruction book.
|
|
Author: | axaday | Posted: | Jan 10, 2020 16:26 | Subject: | Re: Element 6286835 wrong colour | Viewed: | 46 times | Topic: | Catalog | |
|
| In Catalog, Drudatz writes:
| In Catalog, StormChaser writes:
| In Catalog, Drudatz writes:
| (sadly BL is the worst side speed wise when it comes to adding inventories...)
|
If you were tasked with identifying a reason for this, keeping in mind the source
of BrickLink inventories, from where would you discover that the problem originates?
|
Sorry I have no idea how BL works behind the scenes so I cant answer that but
I hope that the work with the TLG will speed up those things
|
The way it works is that you or me needs to build an inventory and submit
it. So far this year I have done and the
whole DC CMF series. Next up will be and
all on their way to me in the mail.
How does your plate look?
|
|
Author: | Drudatz | Posted: | Jan 10, 2020 16:06 | Subject: | Re: Element 6286835 wrong colour | Viewed: | 48 times | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| In Catalog, Drudatz writes:
| (sadly BL is the worst side speed wise when it comes to adding inventories...)
|
If you were tasked with identifying a reason for this, keeping in mind the source
of BrickLink inventories, from where would you discover that the problem originates?
|
Sorry I have no idea how BL works behind the scenes so I cant answer that but
I hope that the work with the TLG will speed up those things
|
|
Author: | Drudatz | Posted: | Jan 10, 2020 16:02 | Subject: | Re: Element 6286835 wrong colour | Viewed: | 46 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| that is because BrickLink inventories are based on sealed set contents, and they
have features that other systems do not have, such as complete minifig and minifig
part data, stickers, counterparts, and extras. This is the reason that sellers
prefer to part out using BrickLink inventories, even if it means they have to
wait a while.
|
Sorry but BL has always been VERY slow when it comes to do inventorys (or rather
the Pending Approval).
Recent example: 40395 - 23 lots aka 67 parts. A set is out since 8 days and even
up on Legos site should be up including part list on BL by now imho.
I dont know how the policy is about naming other websites (especially now that
TLG owns BL) but the biggest lego moc site has the part list which includes no
stickers, minifigs or any new parts.
thats no critic of your work Russel just my 2 bricks.
|
|
Author: | axaday | Posted: | Jan 10, 2020 13:23 | Subject: | Re: Element 6286835 wrong colour | Viewed: | 64 times | Topic: | Catalog | |
|
| In Catalog, Dino1 writes:
| In Catalog, Admin_Russell writes:
| In Catalog, Dino1 writes:
| In Catalog, Drudatz writes:
| In Catalog, Classicsmiley writes:
| In Catalog, Drudatz writes:
It just hasn't been added to Bricks & Pieces yet. 6286835 is indeed 28870
in black. It comes in the new Bookshop set.
|
I see but the bookstore isnt parted out on BL yet so op has to wait for that
(sadly BL is the worst side speed wise when it comes to adding inventories...)
|
Maybe it will be better if TLG uses its own admins.
|
Our current admins are in the process of becoming the LEGO Group's own admins.
|
OMG
|
I don't even understand. Bricklink has some computer problems right now
and has long been needing some investment that we all hope Lego will be providing,
but you're talking about Randy, Marek, and the Pauls and I don't know
what you want from them that they don't give you.
|
|
Author: | yorbrick | Posted: | Jan 10, 2020 13:22 | Subject: | Re: Element 6286835 wrong colour | Viewed: | 45 times | Topic: | Catalog | |
|
| In Catalog, Dino1 writes:
| In Catalog, Drudatz writes:
| In Catalog, Classicsmiley writes:
| In Catalog, Drudatz writes:
It just hasn't been added to Bricks & Pieces yet. 6286835 is indeed 28870
in black. It comes in the new Bookshop set.
|
I see but the bookstore isnt parted out on BL yet so op has to wait for that
(sadly BL is the worst side speed wise when it comes to adding inventories...)
|
Maybe it will be better if TLG uses its own admins.
|
I doubt it. The catmins especially know their stuff. Significantly more than
LEGO customer service reps do. When older parts are not available, the LEGO CS
often suggest replacement parts that are nothing like what they are meant to
replace.
|
|
Author: | rikitikitaviguy | Posted: | Jan 10, 2020 13:20 | Subject: | Re: Element 6286835 wrong colour | Viewed: | 38 times | Topic: | Catalog | |
|
| "Politically Correct Crap"
LM
In Catalog, Dino1 writes:
| In Catalog, axaday writes:
| In Catalog, Dino1 writes:
| In Catalog, Drudatz writes:
There are many elements in unknown colors.
|
With PCCs?
|
What is PCC?
|
|
|
Author: | axaday | Posted: | Jan 10, 2020 13:20 | Subject: | Re: Element 6286835 wrong colour | Viewed: | 46 times | Topic: | Catalog | |
|
| In Catalog, Classicsmiley writes:
Well, it looks like it was probably just a data entry accident. I went to see
what the instructions would say on the set that had it in medium azure and no
set, unless it is a brand new one, has it in medium azure.
I have the set. If no one has corrected it when I get home and can confirm,
I'll take care of it. But it certainly looks like someone already entered
PCCs from those instructions because only the lizard and the printed tiles lack
them.
|
|
|
Author: | StormChaser | Posted: | Jan 10, 2020 13:10 | Subject: | Re: Element 6286835 wrong colour | Viewed: | 53 times | Topic: | Catalog | |
|
| In Catalog, Drudatz writes:
| (sadly BL is the worst side speed wise when it comes to adding inventories...)
|
If you were tasked with identifying a reason for this, keeping in mind the source
of BrickLink inventories, from where would you discover that the problem originates?
|
|
Author: | Dino | Posted: | Jan 10, 2020 13:10 | Subject: | Re: Element 6286835 wrong colour | Viewed: | 57 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| In Catalog, Dino1 writes:
| In Catalog, Drudatz writes:
| In Catalog, Classicsmiley writes:
| In Catalog, Drudatz writes:
It just hasn't been added to Bricks & Pieces yet. 6286835 is indeed 28870
in black. It comes in the new Bookshop set.
|
I see but the bookstore isnt parted out on BL yet so op has to wait for that
(sadly BL is the worst side speed wise when it comes to adding inventories...)
|
Maybe it will be better if TLG uses its own admins.
|
Our current admins are in the process of becoming the LEGO Group's own admins.
|
OMG
|
|
|
Author: | Admin_Russell | Posted: | Jan 10, 2020 13:04 | Subject: | Re: Element 6286835 wrong colour | Viewed: | 66 times | Topic: | Catalog | |
|
|
BrickLink ID CardAdmin_Russell
|
Location: USA, California |
Member Since |
Contact |
Type |
Status |
May 9, 2017 |
|
Admin |
|
|
BrickLink Administrator |
|
| In Catalog, Drudatz writes:
| In Catalog, Classicsmiley writes:
| In Catalog, Drudatz writes:
It just hasn't been added to Bricks & Pieces yet. 6286835 is indeed 28870
in black. It comes in the new Bookshop set.
|
I see but the bookstore isnt parted out on BL yet so op has to wait for that
(sadly BL is the worst side speed wise when it comes to adding inventories...)
|
That is because BrickLink inventories are based on sealed set contents, and they
have features that other systems do not have, such as complete minifig and minifig
part data, stickers, counterparts, and extras. This is the reason that sellers
prefer to part out using BrickLink inventories, even if it means they have to
wait a while.
|
|
Author: | Dino | Posted: | Jan 10, 2020 12:54 | Subject: | Re: Element 6286835 wrong colour | Viewed: | 47 times | Topic: | Catalog | |
|
| In Catalog, Drudatz writes:
| In Catalog, Classicsmiley writes:
| In Catalog, Drudatz writes:
It just hasn't been added to Bricks & Pieces yet. 6286835 is indeed 28870
in black. It comes in the new Bookshop set.
|
I see but the bookstore isnt parted out on BL yet so op has to wait for that
(sadly BL is the worst side speed wise when it comes to adding inventories...)
|
Maybe it will be better if TLG uses its own admins.
|
|
Author: | Dino | Posted: | Jan 10, 2020 12:50 | Subject: | Re: Element 6286835 wrong colour | Viewed: | 43 times | Topic: | Catalog | |
|
| In Catalog, axaday writes:
| In Catalog, Dino1 writes:
| In Catalog, Drudatz writes:
There are many elements in unknown colors.
|
With PCCs?
|
What is PCC?
|
|
Author: | Drudatz | Posted: | Jan 10, 2020 12:41 | Subject: | Re: Element 6286835 wrong colour | Viewed: | 51 times | Topic: | Catalog | |
|
| In Catalog, Classicsmiley writes:
| In Catalog, Drudatz writes:
It just hasn't been added to Bricks & Pieces yet. 6286835 is indeed 28870
in black. It comes in the new Bookshop set.
|
I see but the bookstore isnt parted out on BL yet so op has to wait for that
(sadly BL is the worst side speed wise when it comes to adding inventories...)
|
|
|
Author: | axaday | Posted: | Jan 10, 2020 11:51 | Subject: | Re: Element 6286835 wrong colour | Viewed: | 46 times | Topic: | Catalog | |
|
| In Catalog, Dino1 writes:
| In Catalog, Drudatz writes:
There are many elements in unknown colors.
|
With PCCs?
|
Author: | Dino | Posted: | Jan 10, 2020 11:15 | Subject: | Re: Element 6286835 wrong colour | Viewed: | 57 times | Topic: | Catalog | |
|
| In Catalog, Drudatz writes:
There are many elements in unknown colors.
|
Author: | WoutR | Posted: | Jan 9, 2020 20:05 | Subject: | Re: New 2020 Colors | Viewed: | 54 times | Topic: | Catalog | |
|
| In Catalog, WoutR writes:
| I am waiting for
I want to add zombie-teal to my collection
but so far I have only found bricks with older mold numbers.
|
I didn't have to wait long
|
|
Author: | WoutR | Posted: | Jan 8, 2020 20:39 | Subject: | Re: New 2020 Colors | Viewed: | 62 times | Topic: | Catalog | |
|
| In Catalog, WhiteVanMan writes:
| In Catalog, StormChaser writes:
| This is not a comprehensive list. As always, it would be most helpful if BrickLink
included an easy way to see these.
New appearances in dark turquoise:
* | | 18923c01 Vehicle, Base 8 x 16 x 2 1/2 with Mudguards Raised, 4 x 14 Recessed Center with 3 Holes, and Dark Bluish Gray Wheels Holders Parts: Vehicle, Base |
|
Still waiting for these: in Dark Turquoise
I really want to be able to build one of these in this colour!
Paul
|
I am waiting for
I want to add zombie-teal to my collection
but so far I have only found bricks with older mold numbers.
|
|
Author: | fracksfreakshow | Posted: | Jan 8, 2020 00:28 | Subject: | Re: Stores Need Attention | Viewed: | 67 times | Topic: | Catalog | |
|
| Did you shop at other stores, put items in the cart, and change your mind about
ordering them? This usually happens to me when I put together an order, leave
it for a night, come back and the store has sold items I had in my cart or changed
price on them.
In Catalog, QNIKET8 writes:
| I am new to Bricklink. I recently decided to get out my lego to rebuild some
of my old Lego Star Wars sets. There were 2 sets I wanted to build but noticed
I was missing some pieces. I ordered two pieces last night (awaiting arrival)
for the first time, but then realised I needed more pieces for the other set.But
it says that 2 stores need my attention, why is that?
Thanks
|
|
|
Author: | QNIKET8 | Posted: | Jan 8, 2020 00:23 | Subject: | Stores Need Attention | Viewed: | 191 times | Topic: | Catalog | Status: | Open | |
|
| I am new to Bricklink. I recently decided to get out my lego to rebuild some
of my old Lego Star Wars sets. There were 2 sets I wanted to build but noticed
I was missing some pieces. I ordered two pieces last night (awaiting arrival)
for the first time, but then realised I needed more pieces for the other set.But
it says that 2 stores need my attention, why is that?
Thanks
|
Author: | AZbrickGUY | Posted: | Jan 7, 2020 22:11 | Subject: | Batman Movie figures S1/2 | Viewed: | 46 times | Topic: | Catalog | Status: | Open | |
|
| Is there anyway we can split up the two sets of minifigs from Batman movie lines??
Series 1 and 2 are all under one. Disney is 1 and 2 and not all together. I cant
help to fell that they should be, Batman Movie S1 and S2? Just sayin.
|
Author: | Duq | Posted: | Jan 7, 2020 19:47 | Subject: | Element 6286835 wrong colour | Viewed: | 114 times | Topic: | Catalog | Status: | Open | |
|
| Element 6286835 is 28870 in black, not medium azure. |
Author: | waltzking | Posted: | Jan 7, 2020 18:49 | Subject: | Alternate Images | Viewed: | 79 times | Topic: | Catalog | Status: | Open | |
|
| Please add these alternate images for comparison of mini doll head patterns 37591
vs 66706 and also 37592 vs 66600 with new but similar print.
Jonathan
|
|
|
Author: | Hygrotus | Posted: | Jan 7, 2020 14:35 | Subject: | Re: Please approve | Viewed: | 43 times | Topic: | Catalog | |
|
| In Catalog, Hygrotus writes:
and this one
|
|
Author: | WhiteVanMan | Posted: | Jan 7, 2020 12:28 | Subject: | Re: New 2020 Colors | Viewed: | 53 times | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| This is not a comprehensive list. As always, it would be most helpful if BrickLink
included an easy way to see these.
New appearances in dark turquoise:
* | | 18923c01 Vehicle, Base 8 x 16 x 2 1/2 with Mudguards Raised, 4 x 14 Recessed Center with 3 Holes, and Dark Bluish Gray Wheels Holders Parts: Vehicle, Base |
|
Still waiting for these: in Dark Turquoise
I really want to be able to build one of these in this colour!
Paul
|
|
Author: | pikachu3 | Posted: | Jan 7, 2020 11:45 | Subject: | Re: New 2020 Colors | Viewed: | 51 times | Topic: | Catalog | |
|
| In Catalog, Huw writes:
| In Catalog, Hygrotus writes:
Yes, that does appear to be a new colour, which LEGO abbreviates to 'TR.
BLUE OPAL'.
|
Lego calls it "362 Transparent Blue Opal". And there's another new color:
6294242 in set 43173. I'd assume it's "Transparent Pink Opal", but I
haven't found confirmation on the name/number yet.
|
|
Author: | normann1974 | Posted: | Jan 7, 2020 11:25 | Subject: | Broken part x191c01? | Viewed: | 97 times | Topic: | Catalog | Status: | Open | |
|
| Should I be able to push all the way to the bottom with almost no
force when I cover up the hole, or does this mean that the part is broken? This
is the first small version I've had.
/Jan
|
Author: | jim35 | Posted: | Jan 7, 2020 09:41 | Subject: | Re: Catalog Policy Issues | Viewed: | 33 times | Topic: | Catalog | |
|
| In General, mfav writes:
Love the "expert" one.
|
|
|
Author: | 62Bricks | Posted: | Jan 7, 2020 07:53 | Subject: | Re: Remove image | Viewed: | 53 times | Topic: | Catalog | |
|
| In Catalog Requests, Admin_Russell writes:
| In Catalog Requests, 62Bricks writes:
| In Catalog Requests, Admin_Russell writes:
| In Catalog Requests, mfav writes:
| In Catalog Requests, Admin_Russell writes:
| Why shouldn't rust be considered a verified color for this part?
|
I know it's daft of me to think this, but can't you just call up the
mothership and get an answer? Then definitively tell us what it is? I mean instead
of questioning us. Like we know.
You know. As in sincerely, can't you do that?
|
Regarding this color Rust, BrickLink's definition (and usage) don't line
up with the internal official palette, as you can see here:
http://ryanhowerter.net/colors.html
BrickLink sellers tend to list colors exactly as they see them, not what the
catalog says they are supposed to be. That is why there are 86 lots listed under
Rust, yet no inventory lists Rust as a "known" color. And the image "verifies"
the existence of this part in Rust - that's why I am hesitant to remove it.
As far as access to the "mothership" goes, it's still very early in the transition.
Yes, I could contact someone who could put me in touch with someone else who
has access to internal color info. But right now there are other much more important
issues to deal with, so I will be reserving my lifelines for those.
|
"Rust" is just red in certain non-ABS parts. If it is considered a legitimate
color, then we should also have the "medium old gray" of certain old 1x1 clips
and airtanks and maybe "translucent light yellow" for old minifig hands and airtanks.
|
According to Ryan's sheet, 216 Rust is an official LEGO color. And 13 Red
Orange falls into that category too:
|
Ryan's sheet also points out that there is a "rust" that is "Really 21 Bright
Red in softer plastics."
That is the case with the boat mast in question here. I don't think it is
a deliberate color by Lego in this part. It is considered red by Lego, but appears
dull because of the material. If we are going to use our own color definitions,
which I have no problem with, then we should allow them in similar situations
like I mention where the appearance does not match the official Lego color because
of the part material. .
|
|
Author: | Stellar | Posted: | Jan 7, 2020 04:17 | Subject: | Re: Remove image | Viewed: | 62 times | Topic: | Catalog | |
|
| In Catalog Requests, Admin_Russell writes:
| In Catalog Requests, normann1974 writes:
| For part
* | | 476 Bar 12L with Open Stud, Tow Ball, and Slit (Boat Mast) Parts: Bar | the image for Rust color should be removed. This part doesn't
exist in this color (but may appear rust colored as written in the note).
/Jan
|
I'm not sure I follow this. This part does appear in a rust variant - we
have one here in the office. It's not exactly like other rust colors, but
it's not red either.
Why shouldn't rust be considered a verified color for this part?
|
If you have one there, could you make a better picture and upload to the catalogue?
The current one is small and blur...
|
|
Author: | Admin_Russell | Posted: | Jan 6, 2020 22:02 | Subject: | Re: Remove image | Viewed: | 62 times | Topic: | Catalog | |
|
|
BrickLink ID CardAdmin_Russell
|
Location: USA, California |
Member Since |
Contact |
Type |
Status |
May 9, 2017 |
|
Admin |
|
|
BrickLink Administrator |
|
| In Catalog Requests, 62Bricks writes:
| In Catalog Requests, Admin_Russell writes:
| In Catalog Requests, mfav writes:
| In Catalog Requests, Admin_Russell writes:
| Why shouldn't rust be considered a verified color for this part?
|
I know it's daft of me to think this, but can't you just call up the
mothership and get an answer? Then definitively tell us what it is? I mean instead
of questioning us. Like we know.
You know. As in sincerely, can't you do that?
|
Regarding this color Rust, BrickLink's definition (and usage) don't line
up with the internal official palette, as you can see here:
http://ryanhowerter.net/colors.html
BrickLink sellers tend to list colors exactly as they see them, not what the
catalog says they are supposed to be. That is why there are 86 lots listed under
Rust, yet no inventory lists Rust as a "known" color. And the image "verifies"
the existence of this part in Rust - that's why I am hesitant to remove it.
As far as access to the "mothership" goes, it's still very early in the transition.
Yes, I could contact someone who could put me in touch with someone else who
has access to internal color info. But right now there are other much more important
issues to deal with, so I will be reserving my lifelines for those.
|
"Rust" is just red in certain non-ABS parts. If it is considered a legitimate
color, then we should also have the "medium old gray" of certain old 1x1 clips
and airtanks and maybe "translucent light yellow" for old minifig hands and airtanks.
|
According to Ryan's sheet, 216 Rust is an official LEGO color. And 13 Red
Orange falls into that category too:
|
|
Author: | 62Bricks | Posted: | Jan 6, 2020 21:10 | Subject: | Re: Remove image | Viewed: | 46 times | Topic: | Catalog | |
|
| In Catalog Requests, Admin_Russell writes:
| In Catalog Requests, mfav writes:
| In Catalog Requests, Admin_Russell writes:
| Why shouldn't rust be considered a verified color for this part?
|
I know it's daft of me to think this, but can't you just call up the
mothership and get an answer? Then definitively tell us what it is? I mean instead
of questioning us. Like we know.
You know. As in sincerely, can't you do that?
|
Regarding this color Rust, BrickLink's definition (and usage) don't line
up with the internal official palette, as you can see here:
http://ryanhowerter.net/colors.html
BrickLink sellers tend to list colors exactly as they see them, not what the
catalog says they are supposed to be. That is why there are 86 lots listed under
Rust, yet no inventory lists Rust as a "known" color. And the image "verifies"
the existence of this part in Rust - that's why I am hesitant to remove it.
As far as access to the "mothership" goes, it's still very early in the transition.
Yes, I could contact someone who could put me in touch with someone else who
has access to internal color info. But right now there are other much more important
issues to deal with, so I will be reserving my lifelines for those.
|
"Rust" is just red in certain non-ABS parts. If it is considered a legitimate
color, then we should also have the "medium old gray" of certain old 1x1 clips
and airtanks and maybe "translucent light yellow" for old minifig hands and airtanks.
|
|
Author: | Admin_Russell | Posted: | Jan 6, 2020 20:52 | Subject: | Re: Remove image | Viewed: | 65 times | Topic: | Catalog | |
|
|
BrickLink ID CardAdmin_Russell
|
Location: USA, California |
Member Since |
Contact |
Type |
Status |
May 9, 2017 |
|
Admin |
|
|
BrickLink Administrator |
|
| In Catalog Requests, mfav writes:
| In Catalog Requests, Admin_Russell writes:
| Why shouldn't rust be considered a verified color for this part?
|
I know it's daft of me to think this, but can't you just call up the
mothership and get an answer? Then definitively tell us what it is? I mean instead
of questioning us. Like we know.
You know. As in sincerely, can't you do that?
|
Regarding this color Rust, BrickLink's definition (and usage) don't line
up with the internal official palette, as you can see here:
http://ryanhowerter.net/colors.html
BrickLink sellers tend to list colors exactly as they see them, not what the
catalog says they are supposed to be. That is why there are 86 lots listed under
Rust, yet no inventory lists Rust as a "known" color. And the image "verifies"
the existence of this part in Rust - that's why I am hesitant to remove it.
As far as access to the "mothership" goes, it's still very early in the transition.
Yes, I could contact someone who could put me in touch with someone else who
has access to internal color info. But right now there are other much more important
issues to deal with, so I will be reserving my lifelines for those.
|
|
Author: | mfav | Posted: | Jan 6, 2020 20:00 | Subject: | Re: Remove image | Viewed: | 51 times | Topic: | Catalog | |
|
| In Catalog Requests, Admin_Russell writes:
| Why shouldn't rust be considered a verified color for this part?
|
I know it's daft of me to think this, but can't you just call up the
mothership and get an answer? Then definitively tell us what it is? I mean instead
of questioning us. Like we know.
You know. As in sincerely, can't you do that?
|
|
Author: | Give.Me.A.Brick | Posted: | Jan 6, 2020 19:51 | Subject: | Re: Instructions Dimensions -- way off? | Viewed: | 44 times | Topic: | Catalog | |
|
| In Catalog, bje writes:
| In Catalog, Give.Me.A.Brick writes:
| On My Inventory the dimensions for set are 582mm x 378mm. Which is
the size of the Box itself (!)
How were these dimensions populated and what can I do to remove them altogether
(not just one by one)?
(Or better yet to mass-set the dimensions correctly.)
Thanhk you again.
|
LOL me again, and thank you for alerting me to this as well as I went back and
checked mine saw some of them had a base thickness of 1cm - this is wrong. Research
cap on and lo behold - I think there are still a few of these floating about:
https://www.bricklink.com/message.asp?ID=1063022
So that gets to the how it is populated. How to mass change it is another matter
altogether. Would you just want to change the thickness or do you want actual
dimensions? For actual dimensions you are going to have to measure each and every
one which still has the z dimension set to 10mm or 0mm. There is no way to simply
check this you have to check your entire inventory manually as there is no tool
to search the packing dimensions of items in your inventory. I'm not quite
sure if you can mass change the dimensions for your inventory - are they not
all different? Setting them all to manual for the time being, would be the same
method as in that other thread, except now you go M for Manual.
To mass change the dimensions:
For an item which you want to change the dimensions to say dim X, dim Y, dim
Z to 180 x 38 x 28 mm
Use the find and replace method in this message:
https://www.bricklink.com/message.asp?ID=1166531
You make the file as you would upload it and add the lines as follows: (put angle
brackets where I have now got square brackets)
[INVDIMX]180[/INVDIMX]
[INVDIMY]38[/INVDIMY]
[INVDIMZ]28[/INVDIMZ]
As I noted - you anyway have to punch in values for each one. It might be easier
to set them all to manual, have some unfortunae soul sit with a caliper for a
day and ask for mass update on this topic:
https://www.bricklink.com/message.asp?ID=1059042
then reset your invetory again. It normally takes about a day for these to be
fixed, but since Russell is the only doing all of this now, I would suggest giving
a bit of extra time.
I'm also going to apologise here, I've never thought of checking those
dmension when I submit items for the catalogue. My bad. I will make a big fat
note to fix this oversight on my part, thank you again for pointing me in the
right direction.
HTH
|
Wonderful, Jean!
Between BrickStock and Notepad, it worked.
I changed every Instructions to Weight Bound and the Dimensions to 300x200x10mm
(A4 size). It works here because as long as it is under the 90cm linear measure,
only the weight counts for shipping rates.
(Will have to adjust the bigger ones A3 size manually, but they're only a
few.)
Thank you again for your detailed explanation!
I will be uploading many Instructions this year, hopefully I can enter the correct
dimensions to the Catalog whenever Catalog Changes are working again.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|