Please make changes to the following inventory: (Set 60222-1) * Add 2 Part 44302a Yellow Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove (Alternate) [...] (54 months ago, Dec 27, 2019, to Inventories Requests)
[...] Hi This set was sold as MIB (nov. 2016). This set came in a 12V lot I bought in 2011. This boxes were not sealed at that time (as we have for now). So [...] (54 months ago, Dec 24, 2019, to Inventories Requests)
[...] Hi I checked my set. It has the LBG pins. Do you have the same instructions? #4292949 My box item n° = 4283698 (bought it here from the US-market). On BS is has [...] (54 months ago, Dec 7, 2019, to Inventories Requests)
Please make changes to the following inventory: (Set 60235-24) * Add 1 Part 30377 Dark Bluish Gray Arm Mechanical, Battle Droid (Extra) Comments from Submitter: found [...] (54 months ago, Dec 1, 2019, to Inventories Requests)
[...] Hi As you know there are 2 versions. It would be fine if the first release parts are in the inventory, other parts in the alternate section. (URL) (URL) There are a [...] (57 months ago, Sep 7, 2019, to Inventories Requests)
[...] Hi or... the inventory from set 7905 is wrong? Not (Part x77cc200) as is for now but (Part x77ac200) if this part is the correct one in the cardboard sleeve. But don't [...] (58 months ago, Aug 25, 2019, to Inventories Requests)
Please make changes to the following inventory: (Part 4276325) * Change 1 Part Black {x77ac200 String, Cord Thin 200cm to x77cc200 String, Cord Medium Thickness 200cm} Comments [...] (58 months ago, Aug 21, 2019, to Inventories Requests)
[...] Hi No... already in see inventory note below. There are at least 2 different versions of instructions for this set. The differences for the second version are indicated [...] (58 months ago, Aug 11, 2019, to Inventories Requests)
[...] You're right Reza, I did look on the instructions and large images on Peeron and Brickset for alternate images from the box but didn't give attention to the BL-box [...] (59 months ago, Jul 31, 2019, to Inventories Requests)
[...] Thanks Paul Mixend up? Did I? :D Please check again, the 1st link is from the no longer available instructions from 2007. The 2nd link from the 2010 version. Links taken [...] (59 months ago, Jul 30, 2019, to Inventories Requests)
[...] Hi No, the first release (from 2007) came with a separate string and hose nozzle. Instructions 4502939 or 4502940: see page 15: (URL) The updated release (from [...] (59 months ago, Jul 30, 2019, to Inventories Requests)
[...] Hi Randy Peeron says 2x 3009p01 and 6x 3009 yellow 1x6 bricks, BL = 1x and 7x. (URL) Not visible on both sides, only 1x on the extra models: (URL) (left model maybe [...] (59 months ago, Jul 29, 2019, to Inventories Requests)
Please make changes to the following inventory: (Set 60060-1) * Add 2 Part 14520 Red Brick, Modified 2 x 4 - 1 x 4 with 2 Recessed Studs and Thin Side Arches (Alternate) [...] (60 months ago, Jul 2, 2019, to Inventories Requests)
[...] Thanks Fred When I did the inv. change req. the old picture pop-up = (URL) I did again a simulatie, see image below :D ;) Stefaan (60 months ago, Jun 18, 2019, to Inventories Requests)
Please make changes to the following inventory: (Set 7864-1) * Change 1 Part Light Gray {7864 Electric, Train 12V Transformer for 220V - Type 3 to 7864c01 Electric, Train 12V [...] (60 months ago, Jun 17, 2019, to Inventories Requests)
[...] Hi There are at least 2 different versions of instructions for this set. The differences for the second version are indicated in this inventory in the Alternate Items [...] (60 months ago, Jun 3, 2019, to Inventories Requests)
[...] Hi No... that was also my first thought (my cancelled post) but have a look at the instructions and all 5 are used as regular axle. ;) Stefaan (61 months ago, May 5, 2019, to Inventories Requests)
[...] Hi it looks like the 'A' and 'B' sticker (both only once on the sticker sheet) are stuck with a towel sticker. (Part 231.1stk01) A only: (URL) [...] (62 months ago, May 1, 2019, to Inventories Requests)
Please make changes to the following inventory: (Set 60215-1) * Add 1 Part 98138 Trans-Red Tile, Round 1 x 1 (Extra) Comments from Submitter: source: part out sets (62 months ago, Apr 20, 2019, to Inventories Requests)
Please make changes to the following inventory: (Set 60128-1) * Change 2 Part Black {44567 Hinge Plate 1 x 2 Locking with 1 Finger on Side (undetermined type) to 44567b [...] (62 months ago, Apr 17, 2019, to Inventories Requests)
Please make changes to the following inventory: (Set 60054-1) * Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b [...] (62 months ago, Apr 16, 2019, to Inventories Requests)
Please make changes to the following inventory: (Set 4434-1) * Change 2 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a [...] (62 months ago, Apr 16, 2019, to Inventories Requests)
[...] Hi And also... both stickers are already in the catalog as counterpart. the OP has a sticker on a wrong part :D ;) Stefaan (62 months ago, Apr 12, 2019, to Inventories Requests)
[...] Hi They came assembled, that's for sure. As I wrote: 'glued or pressed' I had a lot 6015+6014a and I took them apart and there was a residue of glue on them. [...] (63 months ago, Mar 12, 2019, to Catalog)
[...] Hi Yes they are factory pre-assembled wheels. The first ones that came out were glued or pressed together. Same for the 3464c02 and 4624c01 and 4624c02. (from 1984-85 [...] (63 months ago, Mar 11, 2019, to Catalog)
Please make changes to the following inventory: (Set 60204-1) * Add 2 Part 44302a Light Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove (Alternate) [...] (64 months ago, Feb 6, 2019, to Inventories Requests)
[...] Hi Was a version with the 1x4 grill brick exist? (URL) A sticker is used over 3x 1x4 plates. Same as set 623 (Set 623-1) ;) Stefaan (64 months ago, Feb 5, 2019, to Inventories Requests)
[...] Hi That is correct, my part outs came with the alternate that was found. Weird that I have not seen this. ;) Stefaan (65 months ago, Jan 27, 2019, to Inventories Requests)
[...] Hi and add also 1x yellow tap (Part 4599a) Peeron has also 4x 3062b and 2x 4599a (URL) my count: the MF (driver) use the tap/round brick inside and airtanks [...] (65 months ago, Jan 14, 2019, to Inventories Requests)
[...] Hi that's right, at that time no other type available. you can always do a 'change' and not 'add' and 'delete' :D ;) Stefaan (65 months ago, Jan 13, 2019, to Inventories Requests)
[...] Hi About the brick separator, that's possible: first runs not, updated runs with one? Like this set from the same time: (Set 325-1) Do you have the same box layout [...] (65 months ago, Jan 8, 2019, to Inventories Requests)
Please make changes to the following inventory: (Set 60082-1) * Add 1 Part 3069bpb687 White Tile 1 x 2 with 'JC60082' License Plate Pattern (Sticker) - Set 60082 [...] (65 months ago, Jan 7, 2019, to Inventories Requests)
[...] Hi Randy Don't forget that the partslist not always is correct... I did not check this set and inv. ;) Stefaan (65 months ago, Jan 7, 2019, to Inventories Requests)
Please make changes to the following inventory: (Set 60081-1) * Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b [...] (65 months ago, Jan 6, 2019, to Inventories Requests)
[...] Hi On that picture we can also have a good view on the black 2x2 inverted slope, the toothless one (no supports), at that time (1986-87) this slopes have [...] (65 months ago, Jan 4, 2019, to Inventories Requests)
[...] Hi Reza It looks like that the Brazilian market started later and brought a few sets that were no longer available to us on the market. The catalog says it all, no? [...] (65 months ago, Jan 3, 2019, to Inventories Requests)
[...] Pictures taken by owner A. Krieger. Box was MISB and opened by A. Krieger and stick already 1 sticker on the 1x2 brick then take pictures from other bags and parts. [...] (66 months ago, Jan 3, 2019, to Inventories Requests)
Please make changes to the following inventory: (Set 6690-1) * Add 2 Part 4081b Black Plate, Modified 1 x 1 with Clip Light - Thick Ring (Alternate) (match ID 1) [...] (66 months ago, Jan 3, 2019, to Inventories Requests)
Please make changes to the following inventory: (Set 60057-1) * Add 1 Minifig cty473a Orange Jacket with Hood over Light Blue Sweater, Blue Legs, Dark Orange Short Tousled Hair, [...] (66 months ago, Jan 2, 2019, to Inventories Requests)
[...] And same for the '1' and '2' stickers first on a 1x1 brick, alternate model on 1x6 brick ;) Stefaan (66 months ago, Jan 1, 2019, to Inventories Requests)
Please make changes to the following inventory: (Set 75875-1) * Change 2 Part Light Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) [...] (66 months ago, Dec 24, 2018, to Inventories Requests)
Please make changes to the following inventory: (Set 75876-1) * Add 1 Part 3005pb035L White Brick 1 x 1 with 'Mobil 1' and Dark Bluish Gray Markings and 'SCHAEFFLER' [...] (66 months ago, Dec 18, 2018, to Inventories Requests)
[...] Hi My source is own collection, (was MISB) will start with add the stickered parts comming days. ;) Stefaan (66 months ago, Dec 8, 2018, to Inventories Requests)
Please make changes to the following inventory: (Set 75876-1) * Change 4 Part Light Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) [...] (66 months ago, Dec 8, 2018, to Inventories Requests)
[...] Hi Yes, there was also a mix with the old and new grey (but my set came with the new grey (for dark and light). Can't help with the part count/levers [...] (66 months ago, Dec 6, 2018, to Inventories Requests)
[...] Source: own collection, still in sealed bags. Found and bought this 2 bags (only this 2) here on BL in 2007. ;) Stefaan (66 months ago, Dec 6, 2018, to Inventories Requests)
Please make changes to the following inventory: (Set 1656-1) * Delete 2 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side * Delete 6 Part 4073 Trans-Dark Blue Plate, Round [...] (66 months ago, Dec 6, 2018, to Inventories Requests)
[...] Hi I bought this box here on BL when the auctions were still alive (was in 2008). I did a part out (all parts in my set no longer the old grey but the new [...] (66 months ago, Dec 6, 2018, to Inventories Requests)
Please make changes to the following inventory: (Set 7745-1) * Delete 4 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side * Delete 4 Part 4073 Trans-Red Plate, Round 1 x [...] (66 months ago, Dec 4, 2018, to Inventories Requests)
[...] Hi Right, my set is the without 'Octan' sticker. Just checked my set, was build up straight from the MISB and never broken down. Found in the box the used stickersheet [...] (67 months ago, Dec 3, 2018, to Inventories Requests)
[...] Source: my own source, see also other reply by the 6881 changes last months Also: parts description here = (URL) ;) Stefaan (67 months ago, Dec 2, 2018, to Inventories Requests)
[...] Source: (URL) Note: got 2 when I was a kid, still have the sprues. One of the sets I remember set came with sprues Also: several round plates broke very easily (side) [...] (67 months ago, Dec 2, 2018, to Inventories Requests)
Please make changes to the following inventory: (Set 6881-1) * Delete 2 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side * Delete 4 Part 4073 Trans-Yellow Plate, Round 1 x [...] (67 months ago, Dec 2, 2018, to Inventories Requests)
Please make changes to the following inventory: (Set 6681-1) * Delete 1 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side (Extra) * Delete 1 Part 4073 Trans-Red Plate, [...] (67 months ago, Dec 2, 2018, to Inventories Requests)
Please make changes to the following inventory: (Set 41016-13) * Change 1 Part Lime {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a [...] (67 months ago, Nov 30, 2018, to Inventories Requests)
Please make changes to the following inventory: (Set 10222-1) * Change 1 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a [...] (67 months ago, Nov 30, 2018, to Inventories Requests)
Please make changes to the following inventory: (Set 10235-1) * Change 9 Part Dark Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to [...] (67 months ago, Nov 30, 2018, to Inventories Requests)
[...] Hi chekck Brickshelf, MISB one goes open, -b type, box (c)1994: (URL) I think the transition is already done, only sets that were available with the -a type [...] (67 months ago, Nov 23, 2018, to Inventories Requests)
[...] Hi My copy has the same parts, without groove. Maybe no alternate is needed here? And just change the 'undetermined' parts? ;) Stefaan (67 months ago, Nov 21, 2018, to Inventories Requests)
Please make changes to the following inventory: (Set 6686-1) * Add 1 Part 6686stk01 (Not Applicable) Sticker for Set 6686 - (195055) (match ID 99) * Add [...] (67 months ago, Nov 19, 2018, to Inventories Requests)
Please make changes to the following inventory: (Set 60001-1) * Change 2 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) [...] (67 months ago, Nov 12, 2018, to Inventories Requests)
[...] Hi There was a change in 2010 from 3 to 2, with 5 replies but this message is no longer in the system viewable. (URL) ;) Stefaan (67 months ago, Nov 12, 2018, to Inventories Requests)
[...] Marek What adjustment need to be done? They are in the catalog, we only need add them to the inventories... :D ;) Stefaan [...] (67 months ago, Nov 7, 2018, to Inventories Requests)
[...] Hi It's storage = gear, so what with other storage boxes? And what with the advent tray? This one is a complete storage bin, separate and only the box as gear? Alternate [...] (67 months ago, Nov 7, 2018, to Inventories Requests)
Please make changes to the following inventory: (Set 60002-1) * Change 2 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (undetermined type) [...] (68 months ago, Nov 3, 2018, to Inventories Requests)
Please make changes to the following inventory: (Set 60057-1) * Add 2 Part 44302a Black Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove (Alternate) [...] (68 months ago, Nov 1, 2018, to Inventories Requests)
Please make changes to the following inventory: (Set 3180-1) * Add 1 Part 3245cpb087 White Brick 1 x 2 x 2 with Inside Stud Holder with 'L. 2.14' and '* 3.01' [...] (68 months ago, Nov 1, 2018, to Inventories Requests)
Please make changes to the following inventory: (Set 60151-1) * Add 1 Part 85970pb021L Bright Light Orange Slope, Curved 10 x 1 with Dark Blue and White Stripes Pattern Model [...] (68 months ago, Nov 1, 2018, to Inventories Requests)