Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | SylvainLS | Posted: | Nov 30, 2019 11:12 | Subject: | Re: can purchased pieces show up in “have” ? | Viewed: | 55 times | Topic: | Suggestions | |
|
| In Suggestions, Andrsv writes:
| In Suggestions, Sallywacko writes:
| My want lists have a place for the bricks I have. It would be nice if the pieces
I purchase through BrickLinks would automatically show up in the haves so I can
keep track. Is there a way to allow this to happen?
|
You can use «Apply order» button in your wanted list
|
Beware!
You can “Apply” the same order to multiple lists, hence counting the same bought
brick multiple times.
Worse, you can “Apply” the same order multiple times to the same list.
Better to make “bought lists” and manually (and painfully) change the values
in the “really anted lists” yourself.
|
|
Author: | randyf | Posted: | Nov 30, 2019 11:09 | Subject: | Re: Adding minifig head | Viewed: | 30 times | Topic: | Catalog | |
|
| In Catalog Requests, mikmo writes:
| I have a bunch of heads the same as 3626bpb0918, but with hollow stud.
How can i determine the next part number to use ?
|
The number for it would just be 3626cpb0918, switching the 'b' for a
'c'.
Cheers,
Randy
|
Author: | mikmo | Posted: | Nov 30, 2019 10:55 | Subject: | Adding minifig head | Viewed: | 76 times | Topic: | Catalog | Status: | Open | |
|
| I have a bunch of heads the same as 3626bpb0918, but with hollow stud.
How can i determine the next part number to use ?
I guess the image and the description can be reused from 3626bpb0918, except
of course the stud type.
Kind regards
Mikael / MikMo
|
Author: | Andrsv | Posted: | Nov 30, 2019 10:31 | Subject: | Re: can purchased pieces show up in “have” ? | Viewed: | 43 times | Topic: | Suggestions | |
|
| In Suggestions, Sallywacko writes:
| My want lists have a place for the bricks I have. It would be nice if the pieces
I purchase through BrickLinks would automatically show up in the haves so I can
keep track. Is there a way to allow this to happen?
|
You can use «Apply order» button in your wanted list
|
|
Author: | randyf | Posted: | Nov 30, 2019 10:26 | Subject: | Re: Inventory Change Request for Set 75261-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, OliS writes:
| Please make changes to the following inventory:
* Delete 1 Part 15403c01 Black Projectile Launcher 1 x 2, Mini Blaster / Shooter with Dark Bluish Gray Trigger (15403 / 15392) (Counterpart)
Comments from Submitter:
This item is used in the droid and not in the set
|
Counterparts are just assemblies that can be made from other parts in the set.
Since this assembly can be made from parts in the set, whether they are in a
minifigure or not, it is acceptable to have it in the Counterparts section. This
request will not be accepted.
Cheers,
Randy
|
|
Author: | Sallywacko | Posted: | Nov 30, 2019 10:19 | Subject: | can purchased pieces show up in “have” ? | Viewed: | 71 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| My want lists have a place for the bricks I have. It would be nice if the pieces
I purchase through BrickLinks would automatically show up in the haves so I can
keep track. Is there a way to allow this to happen?
|
Author: | BricksShop | Posted: | Nov 30, 2019 09:53 | Subject: | Inventory Change Request for Set 75261-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 15403c01 Black Projectile Launcher 1 x 2, Mini Blaster / Shooter with Dark Bluish Gray Trigger (15403 / 15392) (Counterpart)
Comments from Submitter:
This item is used in the droid and not in the set
|
|
Author: | axaday | Posted: | Nov 30, 2019 09:22 | Subject: | Inventory Change Request for Set 1053-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Black {x77ac30 String, Cord Thin 30cm to x77ac75 String, Cord Thin 75cm}
Comments from Submitter:
I failed to measure these back when I got the set, but luckily someone ordered a 75cm string and a 30cm string from me today and I noticed they looked way too similar. I unwound one and measured and it is actually 79 cm, but the strings always vary a bit so I think 75 cm is close enough.
|
|
Author: | paulvdb | Posted: | Nov 30, 2019 02:32 | Subject: | Re: Inventory Change Request for Set 8454-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Jessev writes:
| Please make changes to the following inventory:
* Change {118 to 117} Part Black 2780 Technic, Pin with Friction Ridges Lengthwise WITH Center Slots
* Change {3 to 2} Part Light Gray 3713 Technic Bush
* Change {18 to 17} Part Light Gray 4265c Technic Bush 1/2 Smooth
* Change {5 to 4} Part Light Gray 3647 Technic, Gear 8 Tooth Type 1
* Change {8 to 7} Part Light Gray 4274 Technic, Pin 1/2
Comments from Submitter:
I built the set and the parts I used agree with the parts diagram from the side of the box. These 5 items called for 1 or 2 extra parts that happen to be included in the 'Extra Items' area
|
This will make quantities of these parts the same as in Brickset which gets its
data from lego replacement parts. It will also make the inventory a total of
634 parts which is listed on box images that I found.
|
|
Author: | Jessev | Posted: | Nov 30, 2019 00:50 | Subject: | Inventory Change Request for Set 8454-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {118 to 117} Part Black 2780 Technic, Pin with Friction Ridges Lengthwise WITH Center Slots
* Change {3 to 2} Part Light Gray 3713 Technic Bush
* Change {18 to 17} Part Light Gray 4265c Technic Bush 1/2 Smooth
* Change {5 to 4} Part Light Gray 3647 Technic, Gear 8 Tooth Type 1
* Change {8 to 7} Part Light Gray 4274 Technic, Pin 1/2
Comments from Submitter:
I built the set and the parts I used agree with the parts diagram from the side of the box. These 5 items called for 1 or 2 extra parts that happen to be included in the 'Extra Items' area
|
|
Author: | axaday | Posted: | Nov 29, 2019 21:55 | Subject: | Re: Inventory Change Request for Set 4709-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 3 Part Light Gray {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
* Change 5 Part Tan {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
* Change 7 Part Tan {3044 Slope 45 2 x 1 Double - (Undetermined Underside Version) to 3044b Slope 45 2 x 1 Double - with Inside Bar}
Comments from Submitter:
Sealed set, pics coming
|
|
|
|
Author: | axaday | Posted: | Nov 29, 2019 21:54 | Subject: | Inventory Change Request for Set 4709-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Light Gray {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
* Change 5 Part Tan {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
* Change 7 Part Tan {3044 Slope 45 2 x 1 Double - (Undetermined Underside Version) to 3044b Slope 45 2 x 1 Double - with Inside Bar}
Comments from Submitter:
Sealed set, pics coming
|
|
Author: | Emporiosa | Posted: | Nov 29, 2019 16:38 | Subject: | Re: Create a Have List | Viewed: | 44 times | Topic: | Suggestions | |
|
| In Suggestions, tsystem writes:
| Hi,
After all, thanks for this website ans studio, it's really great tools to
create and find parts !
My idea is to have the possibility to create an "have list" like the "wanted
list" but to reference my parts and so to be abble to make difference between
want / have lists to know wich parts i need to purchase. it will be great for
multipart/large model so i can purchase and work on a first part and continue
searching for other part but making a different wanted list for different submodels
...
I don't know if it's really clear ...
Let me know
Thanks by advance
Mr
|
Have you seen the website Rebrickable? It's fantastic for keeping inventory
of what you have as well as create wanted lists for parts you need to build MOCs
or other sets. It also Bricklink sellers are also integrated with it so you can
create a list there to use for buying on Bricklink
|
|
Author: | Brickwilbo | Posted: | Nov 29, 2019 12:44 | Subject: | Re: Create a Have List | Viewed: | 42 times | Topic: | Suggestions | |
|
| In Suggestions, tsystem writes:
| Hi,
After all, thanks for this website ans studio, it's really great tools to
create and find parts !
My idea is to have the possibility to create an "have list" like the "wanted
list" but to reference my parts and so to be abble to make difference between
want / have lists to know wich parts i need to purchase. it will be great for
multipart/large model so i can purchase and work on a first part and continue
searching for other part but making a different wanted list for different submodels
...
I don't know if it's really clear ...
Let me know
Thanks by advance
Mr
|
You can upgrade to seller,keep the store closed for personal inventory.
Or use Brickstock for personal use.
|
|
Author: | tsystem | Posted: | Nov 29, 2019 12:23 | Subject: | Re: Create a Have List | Viewed: | 41 times | Topic: | Suggestions | |
|
| In Suggestions, tsystem writes:
* before all a great thanks )
|
|
Author: | tsystem | Posted: | Nov 29, 2019 12:22 | Subject: | Create a Have List | Viewed: | 93 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Hi,
After all, thanks for this website ans studio, it's really great tools to
create and find parts !
My idea is to have the possibility to create an "have list" like the "wanted
list" but to reference my parts and so to be abble to make difference between
want / have lists to know wich parts i need to purchase. it will be great for
multipart/large model so i can purchase and work on a first part and continue
searching for other part but making a different wanted list for different submodels
...
I don't know if it's really clear ...
Let me know
Thanks by advance
Mr
|
|
Author: | hpoort | Posted: | Nov 29, 2019 12:02 | Subject: | Re: Linking parts that use the same mold | Viewed: | 49 times | Topic: | Catalog | |
|
| In Catalog, Taccer writes:
| Hi there,
Is there an intention to better integrate, or at least link, pieces that are
physically the same shape, but are split into different records (eg, monochrome
and marbled variants)? An example I've found is 53562 (and 53562pb01, etc).
Users unfamiliar with the history of the part, or how Bricklink's catalogue
works, might not realise that there are are other variants of this exact same
part, as they aren't even mentioned on the monochrome version (in the case
of 53562 such piece didn't debut until four years after its multi-toned version).
Apologies if this has been brought up before (I'm not a regular poster),
it just seems odd that the catalogue links to similar molds (eg, 32174) but not
variations of the exact same mold. I would be prepared to do some work on this.
|
Indeed, users of the Bricklink platform have to know that you always have
to search for 53562* instead of only 53562 if you are interested in the patterned
varieties, and the other way around, that you have to trim the p* part from the
part number to get the plain variety.
This knowledge is in the heads of all frequent users, and in the numbering system,
but not in the underlying database. An automated linking feature to these alternatives
might be a useful addition to the catalog pages (https://www.bricklink.com/v2/catalog/catalogitem.page?P=53562#T=P,
in or just below the ‹div id="_idItemDescriptionContainer"› element) and easy
to implement as a simple SQL-select statement on this page will do. You might
send a suggestion to the helpdesk and hope they will someday implement this useful
addition.
|
|
Author: | SylvainLS | Posted: | Nov 29, 2019 11:57 | Subject: | Re: Linking parts that use the same mold | Viewed: | 36 times | Topic: | Catalog | |
|
| In Catalog, Taccer writes:
| Hi there,
Is there an intention to better integrate, or at least link, pieces that are
physically the same shape, but are split into different records (eg, monochrome
and marbled variants)? An example I've found is 53562 (and 53562pb01, etc).
Users unfamiliar with the history of the part, or how Bricklink's catalogue
works, might not realise that there are are other variants of this exact same
part, as they aren't even mentioned on the monochrome version (in the case
of 53562 such piece didn't debut until four years after its multi-toned version).
Apologies if this has been brought up before (I'm not a regular poster),
it just seems odd that the catalogue links to similar molds (eg, 32174) but not
variations of the exact same mold. I would be prepared to do some work on this.
|
You mean adding a note like this?
“This part also exists in (non-)decorated versions” with a list (or a link to
a search page for the billion different decors )
I’d vote yes if it were a suggestion.
|
|
Author: | OnyxPhoenix | Posted: | Nov 29, 2019 11:15 | Subject: | Linking parts that use the same mold | Viewed: | 68 times | Topic: | Catalog | Status: | Open | |
|
| Hi there,
Is there an intention to better integrate, or at least link, pieces that are
physically the same shape, but are split into different records (eg, monochrome
and marbled variants)? An example I've found is 53562 (and 53562pb01, etc).
Users unfamiliar with the history of the part, or how Bricklink's catalogue
works, might not realise that there are are other variants of this exact same
part, as they aren't even mentioned on the monochrome version (in the case
of 53562 such piece didn't debut until four years after its multi-toned version).
Apologies if this has been brought up before (I'm not a regular poster),
it just seems odd that the catalogue links to similar molds (eg, 32174) but not
variations of the exact same mold. I would be prepared to do some work on this.
|
|
Author: | summerloud | Posted: | Nov 29, 2019 09:32 | Subject: | Inventory Change Request for Part 6172c01 | Viewed: | 35 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 2092c01 Black Duplo, Train Base 4 x 8 Intelli-Train with Battery Compartment
Comments from Submitter:
the train base is not part of this set, i mistakenly ordered both the train engine and the train base, thinking i would need both.
|
|
Author: | randyf | Posted: | Nov 28, 2019 20:19 | Subject: | Inventory Change Request for Set 8004-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3713 Light Gray Technic Bush (Extra)
* Add 1 Part 4265c Light Gray Technic Bush 1/2 Smooth (Extra)
Comments from Submitter:
From sealed set contents.
|
|
Author: | Turez | Posted: | Nov 28, 2019 15:14 | Subject: | Inventory Change Request for Set 60198-1 | Viewed: | 34 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 16 Part bb0219 Dark Bluish Gray Train, Track Plastic (RC Trains) Connection/Stacking Pin for Track Storage (Extra)
Comments from Submitter:
If you need proof for this request: https://youtu.be/jEVzWpVeL0w?t=38
|
|
Author: | Turez | Posted: | Nov 28, 2019 15:14 | Subject: | Inventory Change Request for Set 60238-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part bb0219 Dark Bluish Gray Train, Track Plastic (RC Trains) Connection/Stacking Pin for Track Storage (Extra)
Comments from Submitter:
If you need proof for this request: https://youtu.be/UsKZboczNiE?t=18
|
|
Author: | xoshimin | Posted: | Nov 28, 2019 15:03 | Subject: | Inventory Change Request for Set 9686-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 99773 Dark Bluish Gray Technic, Liftarm Triangle Thin, Type II (match ID 3)
* Change 2 Part Dark Bluish Gray 2905 Technic, Liftarm Triangle Thin {Regular to Alternate} {match ID 0 to 3}
|
|
|
|
|
|
|
Author: | Turez | Posted: | Nov 28, 2019 14:58 | Subject: | Re: Inventory Change Request for Set 4709-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| Please make changes to the following inventory:
* Delete 1 Part 40243c01 Light Gray Stairs Spiral Steps 16 with Support (Counterpart)
Comments from Submitter:
This counterpart (or at least its current inventory) does not really make sense because the colors of the inner parts vary from set to set. The results are wrong colors, see screenshot.
A new entry for every combination would be necessary but I don't know if we really need this stairs as counterparts at all.
|
|
|
|
Author: | Turez | Posted: | Nov 28, 2019 14:58 | Subject: | Inventory Change Request for Set 4709-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 40243c01 Light Gray Stairs Spiral Steps 16 with Support (Counterpart)
Comments from Submitter:
This counterpart (or at least its current inventory) does not really make sense because the colors of the inner parts vary from set to set. The results are wrong colors, see screenshot.
A new entry for every combination would be necessary but I don't know if we really need this stairs as counterparts at all.
|
|
Author: | Brixalotl | Posted: | Nov 28, 2019 13:05 | Subject: | Inventory Change Request for Set 70909-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 44567 Black Hinge Plate 1 x 2 Locking with 1 Finger on Side (undetermined type)
* Add 2 Part 44567a Black Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove (match ID 1)
* Add 2 Part 44567b Black Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove (Alternate) (match ID 1)
* Delete 4 Part 44301 Dark Bluish Gray Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type)
* Add 4 Part 44301b Dark Bluish Gray Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove
Comments from Submitter:
confirmed variants during part out, thanks
|
|
Author: | normann1974 | Posted: | Nov 28, 2019 11:24 | Subject: | Inventory Change Request for Set 3420-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Green {41819c01 Sports Field Section 8 x 16 with Horizontal Slot and Sliding Holder, Assembly to 41819c02 Sports Field Section 8 x 16 with Horizontal Slot and Black Sliding Holder, Assembly}
Comments from Submitter:
Updating for this new part that has the correct slider color (black).
|
|
Author: | normann1974 | Posted: | Nov 28, 2019 11:24 | Subject: | Inventory Change Request for Set 3420-2 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Green {41819c01 Sports Field Section 8 x 16 with Horizontal Slot and Sliding Holder, Assembly to 41819c02 Sports Field Section 8 x 16 with Horizontal Slot and Black Sliding Holder, Assembly}
Comments from Submitter:
Updating for this new part that has the correct slider color (black).
|
|
Author: | normann1974 | Posted: | Nov 28, 2019 11:24 | Subject: | Inventory Change Request for Set 3420-3 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* | | 3420-3 (Inv) Championship Challenge II {Licencié Officiel de l'Equipe de France Edition} 341 Parts, 12 Minifigures, 2002 Sets: Sports: Soccer |
* Change 2 Part Green {41819c01 Sports Field Section 8 x 16 with Horizontal Slot and Sliding Holder, Assembly to 41819c02 Sports Field Section 8 x 16 with Horizontal Slot and Black Sliding Holder, Assembly}
Comments from Submitter:
Updating for this new part that has the correct slider color (black).
|
|
Author: | normann1974 | Posted: | Nov 28, 2019 11:24 | Subject: | Inventory Change Request for Set 3420-4 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Green {41819c01 Sports Field Section 8 x 16 with Horizontal Slot and Sliding Holder, Assembly to 41819c02 Sports Field Section 8 x 16 with Horizontal Slot and Black Sliding Holder, Assembly}
Comments from Submitter:
Updating for this new part that has the correct slider color (black).
|
|
Author: | normann1974 | Posted: | Nov 28, 2019 11:24 | Subject: | Inventory Change Request for Set 3425-2 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Green {41819c01 Sports Field Section 8 x 16 with Horizontal Slot and Sliding Holder, Assembly to 41819c02 Sports Field Section 8 x 16 with Horizontal Slot and Black Sliding Holder, Assembly}
Comments from Submitter:
Updating for this new part that has the correct slider color (black).
|
|
Author: | normann1974 | Posted: | Nov 28, 2019 11:24 | Subject: | Inventory Change Request for Set 3425-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Green {41819c01 Sports Field Section 8 x 16 with Horizontal Slot and Sliding Holder, Assembly to 41819c02 Sports Field Section 8 x 16 with Horizontal Slot and Black Sliding Holder, Assembly}
Comments from Submitter:
Updating for this new part that has the correct slider color (black).
|
|
Author: | normann1974 | Posted: | Nov 28, 2019 11:24 | Subject: | Inventory Change Request for Set 3569-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Green {41819c01 Sports Field Section 8 x 16 with Horizontal Slot and Sliding Holder, Assembly to 41819c02 Sports Field Section 8 x 16 with Horizontal Slot and Black Sliding Holder, Assembly}
Comments from Submitter:
Updating for this new part that has the correct slider color (black).
|
|
Author: | normann1974 | Posted: | Nov 28, 2019 11:23 | Subject: | Inventory Change Request for Set 3421-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Green {41819c01 Sports Field Section 8 x 16 with Horizontal Slot and Sliding Holder, Assembly to 41819c02 Sports Field Section 8 x 16 with Horizontal Slot and Black Sliding Holder, Assembly}
Comments from Submitter:
Updating for this new part that has the correct slider color (black).
|
|
Author: | Turez | Posted: | Nov 28, 2019 10:38 | Subject: | Inventory Change Request for Set 5626-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Orange {50860c01 Motorcycle Dirt Bike with Black Chassis (Short Fairing Mounts) and Dark Bluish Gray Wheels to 50860c12 Motorcycle Dirt Bike with Black Chassis (Long Fairing Mounts) and Dark Bluish Gray Wheels} (Counterpart)
|
Author: | rikitikitaviguy | Posted: | Nov 28, 2019 09:49 | Subject: | Re: Toy's R Us build day sets? | Viewed: | 40 times | Topic: | Catalog | |
|
| Dead link....
In Catalog, Hygrotus writes:
|
|
Author: | randyf | Posted: | Nov 27, 2019 23:26 | Subject: | Re: Inventory Change Request for Set 4776-1 | Viewed: | 30 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, nickvandenberg writes:
| In Inventories Requests, nickvandenberg writes:
| Please make changes to the following inventory:
* Change 1 Minifig {47394pb014 Duplo Figure Lego Ville, Male Castle, Black Legs, Bright Light Orange Chest, Red Arms, Red Hands to 47394pb013 Duplo Figure Lego Ville, Male Castle, Black Legs, Bright Light Orange Chest, Red Arms, Dark Bluish Gray Hands, Open Mouth}
* Change 1 Minifig {47394pb012 Duplo Figure Lego Ville, Male Castle, Black Legs, Red Chest, Bright Light Orange Arms, Bright Light Orange Hands to 47394pb004 Duplo Figure Lego Ville, Male Castle, Black Legs, Red Chest, Bright Light Orange Arms, Dark Bluish Gray Hands}
Comments from Submitter:
After checking the box it seems above mentioned minifigs (47394pb013 and 47394pb004) are the ones depicted on the box. So, I assume these should be mentioned as the "regular" minifigs. Unless there are also different versions of the box. They are quite similar to the ones inventoried in the set right now, but not the same.
|
|
I could not find any good evidence to back these requests up. In fact, some very
nice looking used sets that I found seemed to show the minifigures that are already
in the inventory. Given that this inventory was confirmed a number of times as
well as the fact that the parts lists on DUPLO boxes are notorious for not being
completely accurate, these requests will not be accepted without further proof
beyond box images.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Nov 27, 2019 22:48 | Subject: | Re: Inventory Change Request for Set 6991-1 | Viewed: | 27 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, keverjeroen writes:
| Please make changes to the following inventory:
* Delete 2 Part 4504 Blue Hinge Plate 1 x 6 with 2 and 3 Fingers On Ends
* Delete 4 Part 4275 Blue Hinge Plate 1 x 2 with 3 Fingers
Comments from Submitter:
4504 isn't in this set.
4275 only two, not 4 of this part.
|
Please see the inventory note at the bottom of the set inventory:
"The two blue 4504 Hinge Plate 1 x 6 with 2 and 3 Fingers On Ends and two of
the four blue 4275 Hinge Plate 1 x 2 with 3 Fingers were included in this set
for alternate builds shown on the box."
Since these parts originally came in the set, these requests will not be accepted.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Nov 27, 2019 22:11 | Subject: | Re: Inventory Change Request for Set 75105-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Hygrotus writes:
| Please make changes to the following inventory:
* Add 1 Part 3678bpb055 Light Bluish Gray Slope 65 2 x 2 x 2 with Bottom Tube with Ridges, Hole and Yellow Light Pattern (Sticker) - Set 7965 (Counterpart)
Comments from Submitter:
Exactly the same sticker as in set 7965.
Instruction page 95.
And that's will be all. I had dig through all similar stickers when doing now stickered counterparts for new 75257 Falcon.
|
Marek -
The light on the sticker for the 75105 MF is Tan instead of Yellow as on the
sticker for the 7965 MF. Since the stickers are different, this request will
not be accepted.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Nov 27, 2019 21:06 | Subject: | Re: Inventory Change Request for Set 3825-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| Please make changes to the following inventory:
* Change 3 Part Reddish Brown {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
* Change 2 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 2 Part White {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
Comments from Submitter:
Images from sealed set contents at http://www.brickshelf.com/cgi-bin/gallery.cgi?f=269213
|
|
|
|
Author: | randyf | Posted: | Nov 27, 2019 21:01 | Subject: | Inventory Change Request for Set 3825-1 | Viewed: | 35 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Reddish Brown {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
* Change 2 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 2 Part White {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
Comments from Submitter:
Images from sealed set contents at http://www.brickshelf.com/cgi-bin/gallery.cgi?f=269213
|
|
Author: | randyf | Posted: | Nov 27, 2019 20:35 | Subject: | Re: Inventory Change Request for Set 7894-1 | Viewed: | 30 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| In Inventories Requests, Turez writes:
| Please make changes to the following inventory:
* Delete 3 Part 772 White Brick 1 x 2 x 2 without Inside Axle Holder or Stud Holder (match ID 10)
* Change 3 Part White 3245b Brick 1 x 2 x 2 with Inside Axle Holder {Alternate to Regular} {match ID 10 to 0}
* Change 2 Part Dark Bluish Gray 32064 Technic, Brick 1 x 2 with Axle Hole (Alternate) {match ID 12 to 10}
* Change 2 Part Dark Bluish Gray 32064b Technic, Brick 1 x 2 with Axle Hole - X Opening {match ID 12 to 10}
Comments from Submitter:
https://www.bricklink.com/message.asp?ID=1163628
https://www.bricklink.com/messageThread.aspID=259551&nID=1164165
|
Requires additional evidence.
Cheers,
Randy
|
These requests will not be accepted at this time.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Nov 27, 2019 20:33 | Subject: | Re: Inventory Change Request for Set 6210-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| In Inventories Requests, Turez writes:
| Please make changes to the following inventory:
* Delete 2 Part 772 Tan Brick 1 x 2 x 2 without Inside Axle Holder or Stud Holder (match ID 4)
* Change 2 Part Tan 3245b Brick 1 x 2 x 2 with Inside Axle Holder {Alternate to Regular} {match ID 4 to 0}
* Change 28 Part Reddish Brown 30350a Tile, Modified 2 x 3 with 2 Clips (angled clips) (Alternate) {match ID 5 to 4}
* Change 28 Part Reddish Brown 30350c Tile, Modified 2 x 3 with 2 Clips (thick U clips) {match ID 5 to 4}
Comments from Submitter:
https://www.bricklink.com/message.asp?ID=1163628
https://www.bricklink.com/messageThread.asp?ID=259551&nID=1164165
|
Requires additional evidence.
Cheers,
Randy
|
These requests will not be accepted at this time.
Cheers,
Randy
|
|
Author: | legofanit | Posted: | Nov 27, 2019 15:30 | Subject: | Re: Inventory Change Request for Set 7838-1 | Viewed: | 34 times | Topic: | Inventories Requests | |
|
| I forgot this image with date on the box and the barcode: |
|
|
Author: | CaptainStevo | Posted: | Nov 27, 2019 15:21 | Subject: | Re: Selling piece "collections" by same color | Viewed: | 41 times | Topic: | Colors | |
|
| In Colors, BrickTobi writes:
| In Colors, CaptainStevo writes:
| In Colors, CaptainStevo writes:
| I would love to order "grab bags" of a variety of pieces of the same color. I
have a glut of classic LEGO colors and I would like to buy bundles of newer colors
without swelling my numbers of classic blacks,yellows,reds,etc. Can/do sellers
ever sell this way, and if so, how can a shopper search for that? Any input is
appreciated
|
Thanks for the input, y'all! @BrickTobi, when I go to your store, I see
only dark tan pieces. Is that the entire inventory you have for sale right now?
|
Hello Captain Stevo,
I have a lot of different colors in the shop. The link was only preselected with
an exemplary color.
You can use the filter at the top of the page to filter by any color.
Here is a neutral introduction to the shop: https://store.bricklink.com/BrickTobi&utm_content=globalnav#/shop
|
Oh, now I see how that works! Thanks @bricktobi
|
|
Author: | legofanit | Posted: | Nov 27, 2019 15:16 | Subject: | Re: Inventory Change Request for Set 7838-1 | Viewed: | 45 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, legofanit writes:
| My set has instruction book with date 1983 on the first page and a catalog with
date 1983 in the last page. Both are printed in Germany by "Frank Druck, Preetz/Holst."
Also on the box there is the 1983 date.
Catalog is written in German, French and Italian but NOT in English. So probably
my set was made for Europe and not for North America in a European factory. I
think that TLG had already many factories worldwide in the 80s.
As you are canadian I suppose you have seen mostly or only north american sets,
haven't you? Maybe this can explain the differences? Because with "Support
2 x 4 x 5 Stanchion Inclined" I have now 2 different pieces compared to
Bricklink inventory!
|
As suggested by lego.12vtrains I'm posting some images of my set and the
2 type pieces which are different from Bricklink inventory.
In the first image you can see the 10 Hinge Plate with 3 Fingers and Solid Studs
and the 2 Hinge Plate with 2 Fingers and Hollow Studs.
In the second image you can see the 5 mm wide and the reinforcement just under
the top of the pieces.
|
|
|
Author: | keverjeroen | Posted: | Nov 27, 2019 15:10 | Subject: | Inventory Change Request for Set 6991-1 | Viewed: | 40 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 4504 Blue Hinge Plate 1 x 6 with 2 and 3 Fingers On Ends
* Delete 4 Part 4275 Blue Hinge Plate 1 x 2 with 3 Fingers
Comments from Submitter:
4504 isn't in this set.
4275 only two, not 4 of this part.
|
Author: | AZbrickGUY | Posted: | Nov 27, 2019 11:37 | Subject: | Toy's R Us build day sets? | Viewed: | 117 times | Topic: | Catalog | Status: | Open | |
|
| Hello. Anyway we can get the Toy's R Us build sets added in the set list?
Or am I not looking in the right spot? Thanks.
|
Author: | lego.12vtrains | Posted: | Nov 27, 2019 04:16 | Subject: | Re: Inventory Change Request for Set 5072-1 | Viewed: | 28 times | Topic: | Inventories Requests | |
|
| For completeness here below I attach the photo of the back of the same MISB Service
Pack coming with part 4093c.
|
|
|
Author: | legofanit | Posted: | Nov 26, 2019 16:06 | Subject: | Re: Inventory Change Request for Set 7838-1 | Viewed: | 38 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | The set was given to me as a gift when I was a child. I don't remember exactly
when but I think it was in the second half of the 80s. It was NEW, SEALED and
I'm the first and only owner of this set. I don't have any other lego
sets with similar pieces.
|
Great. But we cannot ignore the chance that the parts might have been mixed since
35 years ago.
|
I exclude that parts have been mixed because I have only few lego sets. I have
checked all of them with Bricklink inventory and none of my sets have pieces
similar to 4276.
| We can further examine your copy. Could you please check what you
have with your set:
1) this
or
|
None of the two. I have the third version with no number. The 5 mm Reinforced.
So there is a second difference in my set! Also Rebrickable says that it looks
like this part has been superseded by LEGO Part 4476b.
I have the one with dots pattern.
|
| According to Bricklink the 4276a pieces were made between 1981 and 1986 and
|
Bricklink says this piece was used for sets that were released for first time
in 1981-86 but it does not say that this piece was made in 1981.
|
OK but anyway according to Bricklink my 4276 Hinge Plate 1 x 2 with 2 Fingers
(Hollow studs) were used for set released in 1981 - 2006 and were used in 266
sets compared to 29 sets only of the solid studs version.
| It is also true that these hinges with solid stud appear as regular for some
sets released in 1985 or 1986, but they are most likely wrong. As of today, I
have not seen any new copy of a set from 1985 or later that came with
and
If what you say is correct, your copy would be the first set I have seen having
a hinge with hollow stud that was produced before 1985!
|
My set has instruction book with date 1983 on the first page and a catalog with
date 1983 in the last page. Both are printed in Germany by "Frank Druck, Preetz/Holst."
Also on the box there is the 1983 date.
Catalog is written in German, French and Italian but NOT in English. So probably
my set was made for Europe and not for North America in a European factory. I
think that TLG had already many factories worldwide in the 80s.
As you are canadian I suppose you have seen mostly or only north american sets,
haven't you? Maybe this can explain the differences? Because with "Support
2 x 4 x 5 Stanchion Inclined" I have now 2 different pieces compared to
Bricklink inventory!
|
|
Author: | SezaR | Posted: | Nov 26, 2019 15:51 | Subject: | Re: Inventory Change Request for Set 7838-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
In Inventories Requests, legofanit writes:
| In Inventories Requests, SezaR writes:
|
No credo che hai ragione!
Is your set new or did you buy it used?
This set was released between 1983-84 but the black hinges
* | | 4275 Hinge Plate 1 x 2 with 3 Fingers on End (Undetermined Type) Parts: Hinge |
and
* | | 4276 Hinge Plate 1 x 2 with 2 Fingers on End (Undetermined Type) Parts: Hinge |
with hollow stud were first produced in 1985. I have a very late new copy (with
box opened but the plastic bags sealed) that comes also with black
and
|
|
Thanks for the time you spent to submit this inventory and reply to my message.
Like you, I started to do some changes two years ago and now, I have made about
990 inventory changes. Many of them are for trains and train-related sets from
80s.
You can check the past changes on any inventory by clicking on "log of completed
changes" at the bottom of the inventory page. For this set, here is the link:
https://www.bricklink.com/catalogInvChangeItem.asp?itemType=S&itemNo=7838-1&viewDate=Y&viewStatus=1
You can click on the icon on the right side and read the discussion for each
inventory change. For example, this is the one for the last change:
https://www.bricklink.com/messageThread.asp?ID=249835
| The set was given to me as a gift when I was a child. I don't remember exactly
when but I think it was in the second half of the 80s. It was NEW, SEALED and
I'm the first and only owner of this set. I don't have any other lego
sets with similar pieces.
|
Great. But we cannot ignore the chance that the parts might have been mixed since
35 years ago. We can further examine your copy. Could you please check what you
have with your set:
1) this
or
2) this
or
| According to Bricklink the 4276a pieces were made between 1981 and 1986 and
|
Bricklink says this piece was used for sets that were released for first time
in 1981-86 but it does not say that this piece was made in 1981. To be clear,
this piece was used as "alternate" for sets
and
In other words, these 2 sets first came with
and
then in later production runs (probably about 1982) the later versions
and
came with these two sets.
It is also true that these hinges with solid stud appear as regular for some
sets released in 1985 or 1986, but they are most likely wrong. As of today, I
have not seen any new copy of a set from 1985 or later that came with
and
I own a copy that was produced and released in late 1985. It came with alternate
baseplate
(because TLG ran out of the baseplates with white dots so they used what they
had available)
and in the box, there was a catalog from 1986, again because this set was supposed
to be sold in very late 1985 or even early 1986 so a catalog of 1985 was of no
use for advertisement.
| the 2 4276 pices in my set were made between 1981 and 2006.
As I wrote before also Rebrickable says that it looks like that has been superseded
by LEGO Part 4276 (called 4726b on Rebrickable) with Hollow Studs.
|
I took a look and the inventories on Rebrickable are very wrong. For exmample,
we already removed the hinges with solid studs from the train
or
but see their inventories on rebriackable. It is so wrong. On that website, there
is no alternate section. I am sure Bricklink is ways more trustable
|
|
Author: | SezaR | Posted: | Nov 26, 2019 15:46 | Subject: | Re: Inventory Change Request for Set 7838-1 | Viewed: | 32 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, lego.12vtrains writes:
| Hello guys,
Reza you are not completely right: here in Italy (and I think in other countries
too) the set 7838 was sold in markets until the end of 1985, as a proof I attach
below the pictures from the 1985 Large Italian catalogue (94350-I).
So there is a very good chance that both part 4275 and 4276 were included in
this set as alternate parts.
|
When I submitted my inventory change here
https://www.bricklink.com/messageThread.asp?ID=249835
I knew it was available in 1985. My new copy comes with a catalog from 1986.
I just forgot and did not check every single detail again, when I wrote that
comment. I cancel it know and edit and rewrite it again. (we cannot edit)
|
|
Author: | lego.12vtrains | Posted: | Nov 26, 2019 15:12 | Subject: | Re: Inventory Change Request for Set 7838-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| Hello guys,
Reza you are not completely right: here in Italy (and I think in other countries
too) the set 7838 was sold in markets until the end of 1985, as a proof I attach
below the pictures from the 1985 Large Italian catalogue (94350-I).
So there is a very good chance that both part 4275 and 4276 were included in
this set as alternate parts.
|
|
|
Author: | SylvainLS | Posted: | Nov 26, 2019 13:40 | Subject: | Re: Find sets based on pieces | Viewed: | 49 times | Topic: | Suggestions | |
|
| In Suggestions, randyf writes:
| In Suggestions, bwbwings writes:
| There is a feature I would love to see in Bricklink, it goes like this:
I have x number of pieces that belong to a set but I do not know what the set
is. I would love to specify which pieces I have and then view all the sets that
all the pieces belong to.
I do know that I can look up a single piece but it gets difficult cross referencing
5 or 6 pieces to find the common set.
Please let me know if you think this would be a beneficial feature or if you
would like more info.
Thanks
|
rebrickable.com
|
And https://www.bricklink.com/catalogIn.asp?viewMulti=Y
|
|
Author: | randyf | Posted: | Nov 26, 2019 13:36 | Subject: | Re: Find sets based on pieces | Viewed: | 50 times | Topic: | Suggestions | |
|
| In Suggestions, bwbwings writes:
| There is a feature I would love to see in Bricklink, it goes like this:
I have x number of pieces that belong to a set but I do not know what the set
is. I would love to specify which pieces I have and then view all the sets that
all the pieces belong to.
I do know that I can look up a single piece but it gets difficult cross referencing
5 or 6 pieces to find the common set.
Please let me know if you think this would be a beneficial feature or if you
would like more info.
Thanks
|
rebrickable.com
|
|
Author: | bwbwings | Posted: | Nov 26, 2019 13:19 | Subject: | Find sets based on pieces | Viewed: | 70 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| There is a feature I would love to see in Bricklink, it goes like this:
I have x number of pieces that belong to a set but I do not know what the set
is. I would love to specify which pieces I have and then view all the sets that
all the pieces belong to.
I do know that I can look up a single piece but it gets difficult cross referencing
5 or 6 pieces to find the common set.
Please let me know if you think this would be a beneficial feature or if you
would like more info.
Thanks
|
|
Author: | calsbricks | Posted: | Nov 26, 2019 07:59 | Subject: | Re: "Fast Shipper" badge for Sellers | Viewed: | 44 times | Topic: | Suggestions | |
|
| In Suggestions, bje writes:
| In Suggestions, searme writes:
| In Suggestions, bje writes:
| Besides - if you know sellers who are listing items they do not have on hand,
you must report those lots to BrickLink
|
I'd love to but how do you suggest I prove that, short of raiding seller's
home/shop?
|
Per your original post - you and other LUG members are aware of those sellers,
so you and your fellow LUG members all report those lots and wait for BL to sort
it out. You are not prosecutor, judge, jury and executioner and neither are you
the policeman. But it also does not help matters if you just talk among yourselves
about it. If you and all other members of your LUG really feel there is a real
serious problem here with a specific subset of sellers, you all report the problem
lots. I'm sure BL can investigate the matter evenhandedly.
On the other hand, if there is nothing in your original statement, then we do
not need this badge idea, as all you have to do is ask the seller to ship to
your timeframe and keep the proof as you require.
|
In addition to what Jean has mentioned you also need to be aware that the suggestion
program has not worked for a long time as development on the classic site is
no longer part of Bricklink's plans. They have agreed publicly to continue
to support it but all work (development) is being aimed at the "Future of Bricklink
e.g. Bricklink XP" as stated in the Presentation at Brickworld. When and if that
happens it appears the business model will change - to what is really unknown
at present with only very sketchy details available. That plus the fact that,
again publicly, Bricklink have stated they are somewhat in limbo over the future
direction they want to decide on means that modifying the classic site is even
further down the line for anything to be done.
Using the existing feedback system is really your only avenue to deal with things
like this. I would think most people agree that system is flawed, not used correctly,
and in need of a facelift - but it doesn't really appear that is likely.
Things can of course change and there are lots of us who want to see that happen
but for the time being use the tools that are already there.
|
|
Author: | bje | Posted: | Nov 26, 2019 07:20 | Subject: | Re: "Fast Shipper" badge for Sellers | Viewed: | 45 times | Topic: | Suggestions | |
|
| In Suggestions, searme writes:
| In Suggestions, bje writes:
| Besides - if you know sellers who are listing items they do not have on hand,
you must report those lots to BrickLink
|
I'd love to but how do you suggest I prove that, short of raiding seller's
home/shop?
|
Per your original post - you and other LUG members are aware of those sellers,
so you and your fellow LUG members all report those lots and wait for BL to sort
it out. You are not prosecutor, judge, jury and executioner and neither are you
the policeman. But it also does not help matters if you just talk among yourselves
about it. If you and all other members of your LUG really feel there is a real
serious problem here with a specific subset of sellers, you all report the problem
lots. I'm sure BL can investigate the matter evenhandedly.
On the other hand, if there is nothing in your original statement, then we do
not need this badge idea, as all you have to do is ask the seller to ship to
your timeframe and keep the proof as you require.
|
|
Author: | searme | Posted: | Nov 26, 2019 06:45 | Subject: | Re: "Fast Shipper" badge for Sellers | Viewed: | 31 times | Topic: | Suggestions | |
|
| In Suggestions, axaday writes:
| eBay has 4 or 5 parameters in the detailed feedback. But I'm not sure who
ever checks it.
|
If an universally visible badge would be dependent on a parameter, you wouldn't
even need to check that parameter manually. It's kind of the whole point.
|
Author: | rkoon | Posted: | Nov 26, 2019 06:45 | Subject: | Inventory Change Request for Set 6543-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 6 Part Yellow {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
|
Author: | searme | Posted: | Nov 26, 2019 06:44 | Subject: | Re: "Fast Shipper" badge for Sellers | Viewed: | 31 times | Topic: | Suggestions | |
|
| In Suggestions, bje writes:
| Besides - if you know sellers who are listing items they do not have on hand,
you must report those lots to BrickLink
|
I'd love to but how do you suggest I prove that, short of raiding seller's
home/shop?
|
|
Author: | axaday | Posted: | Nov 26, 2019 05:51 | Subject: | Re: "Fast Shipper" badge for Sellers | Viewed: | 28 times | Topic: | Suggestions | |
|
| In Suggestions, searme writes:
| What if we added a secondary feedback where instead of just writing if the service
was OK or not OK, the buyer also rates service speed between fast/regular/slow?
And sellers who are consistently rated "fast" by buyers get a badge? Still can
be misused, but should be harder to tamper with. The problem is definitely there
and the existing feedback doesn't solve it. If a dishonest store states they
ship in 5-15 days, you're obviously hoping for 5 and they're obviously
just making 15 look nice. Seriously, maybe set a limit for a maximum shipping
time? If a seller can't ship anything in less than 3 weeks, they obviously
don't have time to run a store OR they're not being truthful about their
stock.
|
eBay has 4 or 5 parameters in the detailed feedback. But I'm not sure who
ever checks it.
|
|
Author: | bje | Posted: | Nov 26, 2019 05:48 | Subject: | Re: "Fast Shipper" badge for Sellers | Viewed: | 35 times | Topic: | Suggestions | |
|
| In Suggestions, searme writes:
| In Suggestions, yorbrick writes:
| I don't think it is necessary. If you have a bad experience then leave appropriate
feedback.
Having a badge will do nothing, as sellers will find a way around it. Plus it
will need policing, which is impossible unless everyone reports tracking information
to BL, which will increase postage costs for buyers. Plus the tracking information
will still need checking to find out if it is genuine.
|
The shops in question clearly prove that feedback is not reliable, as they only
have 10-20% of complaints and they tend to blacklist complainers to prevent them
from buying again. Yes, a small percentage of sellers will find a way around
anything, but I still believe that for majority of them, such a badge would be
reliable. Far more reliable than blindly trusting the seller, which is what we
are mostly doing right now. I've lost all faith in the feedback system -
consider that if a seller declares on his page that he ships in 5-15 days and
then he ships every order in 15 days (which is pretty much the case with some
shops), you still have no grounds for negative feedback. And I feel like a number
of buyers is simply afraid of giving a negative feedback.
|
With 800+ buy orders under the belt you should know that feedback is not in any
way designed to be any barometer of service standards. If the seller is not clear
on when he/she will ship, then message them prior to placing the order and ask
what the timeframe is. That way you do not ahve to trust blindly.
A real example of why feedback is such a difficult tool to use to assess sellers:
I have an outstanding order. I asked the seller to keep proof of shipping. After
two months I ask the seller for the proof of shipping. The seller did not keep
proof of shipping. The seller offers me a refund. I did not order a refund. I
paid for the shipping in trust. The seller has no proof that the money I paid
him for shipping was used as intended. That seller is batting 0 for 3 - he has
not done a single thing I have asked him to do. Yet, if I were to leave him negative
or neutral feedback on the facts right now it will be the end of the world for
him because in his head he thinks he has done right by me by offering a full
refund of the order.
I think that if it is that mission critical that the seller must ship the next
day, then tell the seller that when you palce the order and give him/her a clear
opportunity to cancel if they cannot fulfill the order to your expectations.
If a seller then chooses to accept the order and still gives you that level of
poor service, either do not buy from the seller again or bite the bullet and
leave clear feedback such as "seller promises to ship next day but does not".
Besides - if you know sellers who are listing items they do not have on hand,
you must report those lots to BrickLink so those can be removed and if there
are a sufficient number of those lots, so the sellers can be closed down by BrickLink.
If you say nothing, then you are helping the seller to circumvent the very issues
you are complaining about.
|
|
Author: | searme | Posted: | Nov 26, 2019 05:43 | Subject: | Re: "Fast Shipper" badge for Sellers | Viewed: | 28 times | Topic: | Suggestions | |
|
| What if we added a secondary feedback where instead of just writing if the service
was OK or not OK, the buyer also rates service speed between fast/regular/slow?
And sellers who are consistently rated "fast" by buyers get a badge? Still can
be misused, but should be harder to tamper with. The problem is definitely there
and the existing feedback doesn't solve it. If a dishonest store states they
ship in 5-15 days, you're obviously hoping for 5 and they're obviously
just making 15 look nice. Seriously, maybe set a limit for a maximum shipping
time? If a seller can't ship anything in less than 3 weeks, they obviously
don't have time to run a store OR they're not being truthful about their
stock.
|
|
Author: | yorbrick | Posted: | Nov 26, 2019 05:19 | Subject: | Re: "Fast Shipper" badge for Sellers | Viewed: | 31 times | Topic: | Suggestions | |
|
| In Suggestions, searme writes:
| In Suggestions, yorbrick writes:
| I don't think it is necessary. If you have a bad experience then leave appropriate
feedback.
Having a badge will do nothing, as sellers will find a way around it. Plus it
will need policing, which is impossible unless everyone reports tracking information
to BL, which will increase postage costs for buyers. Plus the tracking information
will still need checking to find out if it is genuine.
|
The shops in question clearly prove that feedback is not reliable, as they only
have 10-20% of complaints and they tend to blacklist complainers to prevent them
from buying again. Yes, a small percentage of sellers will find a way around
anything, but I still believe that for majority of them, such a badge would be
reliable. Far more reliable than blindly trusting the seller, which is what we
are mostly doing right now. I've lost all faith in the feedback system -
consider that if a seller declares on his page that he ships in 5-15 days and
then he ships every order in 15 days (which is pretty much the case with some
shops), you still have no grounds for negative feedback. And I feel like a number
of buyers is simply afraid of giving a negative feedback.
|
So BL goes for a badge for speed of shipping. That may lead to some sellers being
sloppy to make sure they qualify for that badge. So we need a badge for accuracy.
Plus for used parts sellers, we need a badge for quality of parts. And what about
a badge for quality of packaging, as some people don't package adequately.
And so on.
And all these badges need monitoring. Should it be down to the seller to declare
they ship within 5 days, or for the buyers to monitor this. And what about correctness
of order and so on - should a buyer declare this or the seller?
If you want a fast turn around, I suggest avoiding stores that state they will
ship in 5-15 days.
If a store has 10-20% of complaints, then I'd also avoid them.
As to a store blacklisting a buyer that complains, I don't see the problem.
If a buyer is upset with a store enough to leave them negative feedback, then
surely the buyer would not want to buy from that same store again. And if they
do, surely the seller has the right to stop them. If they didn't like their
purchase first time around, then why deal with that customer again if they are
just going to complain again at the service.
|
|
Author: | SurplusParts | Posted: | Nov 26, 2019 05:14 | Subject: | Re: "Fast Shipper" badge for Sellers | Viewed: | 33 times | Topic: | Suggestions | |
|
| I honestly think that if the feedback system was used as it is designed to do,
then some of these problems would be eliminated.
What is the considered % for a top store. 100%? 99%? 90%?
That maybe is the problem. Everyone wants 100% and they don't want negative
feedback. They say they are happy for constructive feedback, but the reality
is that they don't really, unless it is positive. And some stores use some
bad methods to keep that score up.
Imagine if a top store was only 90%. Then people may be more likely to give
honest feedback as it would be less likely to ruin their perfect score.
I recently had a buying experience on Bricklink that i would consider neutral.
Wasn't disastrous, but was certainly not good. However i felt that i couldn't
leave that kind of feedback because i am a seller too, and i didn't want
to receive the same in return. Retaliatory feedback is a big problem.
But as mentioned above, sellers could just mark the shipment as shipped and it
would make no iota of difference.
I think that honest feedback is the only really way to go, but i am guilty of
the opposite myself so i won't be holding my breath that this will happen
any day soon.
Anyway, just my thoughts.
Douglas
|
|
Author: | searme | Posted: | Nov 26, 2019 04:36 | Subject: | Re: "Fast Shipper" badge for Sellers | Viewed: | 43 times | Topic: | Suggestions | |
|
| In Suggestions, yorbrick writes:
| I don't think it is necessary. If you have a bad experience then leave appropriate
feedback.
Having a badge will do nothing, as sellers will find a way around it. Plus it
will need policing, which is impossible unless everyone reports tracking information
to BL, which will increase postage costs for buyers. Plus the tracking information
will still need checking to find out if it is genuine.
|
The shops in question clearly prove that feedback is not reliable, as they only
have 10-20% of complaints and they tend to blacklist complainers to prevent them
from buying again. Yes, a small percentage of sellers will find a way around
anything, but I still believe that for majority of them, such a badge would be
reliable. Far more reliable than blindly trusting the seller, which is what we
are mostly doing right now. I've lost all faith in the feedback system -
consider that if a seller declares on his page that he ships in 5-15 days and
then he ships every order in 15 days (which is pretty much the case with some
shops), you still have no grounds for negative feedback. And I feel like a number
of buyers is simply afraid of giving a negative feedback.
|
|
Author: | yorbrick | Posted: | Nov 26, 2019 04:26 | Subject: | Re: "Fast Shipper" badge for Sellers | Viewed: | 43 times | Topic: | Suggestions | |
|
| I don't think it is necessary. If you have a bad experience then leave appropriate
feedback.
Having a badge will do nothing, as sellers will find a way around it. Plus it
will need policing, which is impossible unless everyone reports tracking information
to BL, which will increase postage costs for buyers. Plus the tracking information
will still need checking to find out if it is genuine.
|
|
Author: | Rob_and_Shelagh | Posted: | Nov 26, 2019 04:21 | Subject: | Re: "Fast Shipper" badge for Sellers | Viewed: | 47 times | Topic: | Suggestions | |
|
| In Suggestions, searme writes:
| Dear Bricklink,
There are certain dishonest shops that really ruin the BL experience for shoppers.
It's hard to prove, but some sellers apparently sell pieces they don't
have in their stock and only order them from elsewhere when you place an order
with them. Apologies if that sounds like unfounded accusation, but my LUG is
aware of a number of shops whose stock is always suspiciously similar to current
LEGO PaB stock, who delay shipping when PaB runs out of stock, and who generally
take around 3 weeks to ship anything, no matter how common and widely available.
Because I see no reliable way to denounce such sellers, I suggest a different,
easily implemented solution. Just like sellers who offer instant checkout are
marked with a special badge, why not create another badge that marks sellers
who ship e.g. 3 days after payment on average? We as buyers have no access to
sellers' shipping times, we can only look up their feedback and see if people
are complaining about slow service. But your system has dates of all payments
and shipments. Simply calculate days between payment and shipping for all seller's
orders and you can get a nice average. And I'm sure this average is going
to show that certain shops typically ship after 2-3 weeks while others ship after
2-3 days. Hell, I had a seller ship an order 30 minutes after payment once. Quality
service deserves recognition, and we as buyers deserve the right to be informed
whether a particular seller provides such service or not. Transparency is the
name of the game. Right now there in no reliable way to determine that, and picking
a wrong seller can mean that your MOC will get hold up for weeks.
I sincerely hope that you will consider this simple, easy to implement request
that would drastically improve Bricklink's overall transparency for buyers.
|
This has been mentioned before and I certainly support identifying and warning
buyers of stores who do not operate by the rules of the site - you must have
all listed stock on hand.
The suggested solution however is not foolproof as cheating stores can simply
mark orders as shipped before they have been. IMO Bricklink should force sellers
to commit in their terms to shipping lead times at least so buyers can avoid
slow (for what ever reason) stores if they need parts quickly. Unfortunately
with any system there will always be stores that try to cheat as well as genuine
postal delays to deal with of course.
As a lug you can at least share your data with other members so they can least
favourite these stores and favourite those who have proven to ship as promised.
Robert
|
|
Author: | searme | Posted: | Nov 26, 2019 04:10 | Subject: | "Fast Shipper" badge for Sellers | Viewed: | 163 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Dear Bricklink,
There are certain dishonest shops that really ruin the BL experience for shoppers.
It's hard to prove, but some sellers apparently sell pieces they don't
have in their stock and only order them from elsewhere when you place an order
with them. Apologies if that sounds like unfounded accusation, but my LUG is
aware of a number of shops whose stock is always suspiciously similar to current
LEGO PaB stock, who delay shipping when PaB runs out of stock, and who generally
take around 3 weeks to ship anything, no matter how common and widely available.
Because I see no reliable way to denounce such sellers, I suggest a different,
easily implemented solution. Just like sellers who offer instant checkout are
marked with a special badge, why not create another badge that marks sellers
who ship e.g. 3 days after payment on average? We as buyers have no access to
sellers' shipping times, we can only look up their feedback and see if people
are complaining about slow service. But your system has dates of all payments
and shipments. Simply calculate days between payment and shipping for all seller's
orders and you can get a nice average. And I'm sure this average is going
to show that certain shops typically ship after 2-3 weeks while others ship after
2-3 days. Hell, I had a seller ship an order 30 minutes after payment once. Quality
service deserves recognition, and we as buyers deserve the right to be informed
whether a particular seller provides such service or not. Transparency is the
name of the game. Right now there in no reliable way to determine that, and picking
a wrong seller can mean that your MOC will get hold up for weeks.
I sincerely hope that you will consider this simple, easy to implement request
that would drastically improve Bricklink's overall transparency for buyers.
|
|
Author: | SezaR | Posted: | Nov 26, 2019 00:09 | Subject: | Re: Inventory Change Request for Set 7838-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, legofanit writes:
| In Inventories Requests, SezaR writes:
|
No credo che hai ragione!
Is your set new or did you buy it used?
This set was released between 1983-84 but the black hinges
* | | 4275 Hinge Plate 1 x 2 with 3 Fingers on End (Undetermined Type) Parts: Hinge |
and
* | | 4276 Hinge Plate 1 x 2 with 2 Fingers on End (Undetermined Type) Parts: Hinge |
with hollow stud were first produced in 1985. I have a very late new copy (with
box opened but the plastic bags sealed) that comes also with black
and
|
|
Thanks for the time you spent to submit this inventory and reply to my message.
Like you, I started to do some changes two years ago and now, I have made about
990 inventory changes. Many of them are for trains and train-related sets from
80s.
You can check the past changes on any inventory by clicking on "log of completed
changes" at the bottom of the inventory page. For this set, here is the link:
https://www.bricklink.com/catalogInvChangeItem.asp?itemType=S&itemNo=7838-1&viewDate=Y&viewStatus=1
You can click on the icon on the right side and read the discussion for each
inventory change. For example, this is the one for the last change:
https://www.bricklink.com/messageThread.asp?ID=249835
| The set was given to me as a gift when I was a child. I don't remember exactly
when but I think it was in the second half of the 80s. It was NEW, SEALED and
I'm the first and only owner of this set. I don't have any other lego
sets with similar pieces.
|
Great. But we cannot ignore the chance that the parts might have been mixed since
35 years ago. We can further examine your copy. Could you please check what you
have with your set:
1) this
or
2) this
or
| According to Bricklink the 4276a pieces were made between 1981 and 1986 and
|
Bricklink says this piece was used for sets that were released for first time
in 1981-86 but it does not say that this piece was made in 1981. To be clear,
this piece was used as "alternate" for sets
and
In other words, these 2 sets first came with
and
then in later production runs (probably about 1982) the later versions
and
came with these two sets.
It is also true that these hinges with solid stud appear as regular for some
sets released in 1985 or 1986, but they are most likely wrong. As of today, I
have not seen any new copy of a set from 1985 or later that came with
and
If what you say is correct, your copy would be the first set I have seen having
a hinge with hollow stud that was produced before 1985!
I own a copy that was produced and released in late 1984. It came with alternate
baseplate
(because TLG ran out of the baseplates with white dots so they used what they
had available)
and in the box, there was a catalog from 1986, again because this set was supposed
to be sold in very late 1984 or even early 1985 so a catalog of 1984 was of no
use for advertizement.
| the 2 4276 pices in my set were made between 1981 and 2006.
As I wrote before also Rebrickable says that it looks like that has been superseded
by LEGO Part 4276 (called 4726b on Rebrickable) with Hollow Studs.
|
I took a look and the inventories on Rebrickable are very wrong. For exmample,
we already removed the hinges with solid studs from the train
or
but see their inventories on rebriackable. It is so wrong. On that website, there
is no alternate section. I am sure Bricklink is ways more trustable
|
|
Author: | Hygrotus | Posted: | Nov 25, 2019 16:18 | Subject: | Inventory Change Request for Set 75105-1 | Viewed: | 31 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3678bpb055 Light Bluish Gray Slope 65 2 x 2 x 2 with Bottom Tube with Ridges, Hole and Yellow Light Pattern (Sticker) - Set 7965 (Counterpart)
Comments from Submitter:
Exactly the same sticker as in set 7965.
Instruction page 95.
And that's will be all. I had dig through all similar stickers when doing now stickered counterparts for new 75257 Falcon.
|
|
Author: | Turez | Posted: | Nov 25, 2019 16:18 | Subject: | Re: Inventory Change Request for Set 6883-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
|
|
|
Author: | Turez | Posted: | Nov 25, 2019 16:17 | Subject: | Inventory Change Request for Set 6883-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part White {3839 Plate, Modified 1 x 2 with Handles - Undetermined Ends and Attachment Type to 3839b Plate, Modified 1 x 2 with Handles - Flat Ends, Low Attachment}
Comments from Submitter:
Unboxing and building at http://www.brickshelf.com/cgi-bin/gallery.cgi?f=544934
The bars of 3839a are longer than the bars of 3839b and have round ends. (Unfortunarly these differences are not shown in the images here at BL, so thanks to http://www.newelementary.com/2019/11/difference-3839-plate-modified-1x2-with-handles.html for pointing that out.)
The second photo shows flat ends and the build in the third photo would not be possible with 3839a.
|
|
Author: | Hygrotus | Posted: | Nov 25, 2019 16:14 | Subject: | Inventory Change Request for Set 75105-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6177pb010 Light Bluish Gray Tile, Round 8 x 8 with SW Millennium Falcon Pattern (Sticker) - Set 7965 (Counterpart)
Comments from Submitter:
Exactly the same sticker as in set 7965.
Instruction page 121.
|
|
Author: | Hygrotus | Posted: | Nov 25, 2019 16:07 | Subject: | Inventory Change Request for Set 75105-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 88930pb022 Light Bluish Gray Slope, Curved 2 x 4 x 2/3 with Bottom Tubes with SW Millennium Falcon Pattern 1 (Sticker) - Set 7965 (Counterpart)
* Add 1 Part 88930pb023 Light Bluish Gray Slope, Curved 2 x 4 x 2/3 with Bottom Tubes with SW Millennium Falcon Pattern 2 (Sticker) - Set 7965 (Counterpart)
* Add 1 Part 88930pb024 Light Bluish Gray Slope, Curved 2 x 4 x 2/3 with Bottom Tubes with SW Millennium Falcon Pattern 3 (Sticker) - Set 7965 (Counterpart)
* Add 1 Part 88930pb025 Light Bluish Gray Slope, Curved 2 x 4 x 2/3 with Bottom Tubes with SW Millennium Falcon Pattern 4 (Sticker) - Set 7965 (Counterpart)
Comments from Submitter:
Exactly the same stickers as in set 7965. Instruction page 125.
|
|
Author: | Hygrotus | Posted: | Nov 25, 2019 16:03 | Subject: | Inventory Change Request for Set 75105-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 6 Part 2958pb054 Light Bluish Gray Technic, Disk 3 x 3 with SW Millennium Falcon Grille Pattern (Sticker) (Counterpart)
Comments from Submitter:
Exactly the same sticker as in set 7965 and 75257. But in set 7965 applied on black technic disk. In sets 75105 and 75257 on LBG technic disk. Instruction page 128 and 130.
|
|
Author: | Hygrotus | Posted: | Nov 25, 2019 15:53 | Subject: | Re: Inventory Change Request for Set 75105-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Hygrotus writes:
| Comments from Submitter:
Exactly the same sticker as in set 7965 and 75257. But in set 7695 is on older mold, now I added it on newer mold from set 75257, but in set 75257 is on DBG tile here is on LBG tile. Instruction page 121.
|
Correction of a note
|
|
Author: | axaday | Posted: | Nov 25, 2019 15:51 | Subject: | Inventory Change Request for Set 9364-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3004f1 Trans-Clear Brick 1 x 2 Transparent with 'Frosted' Horizontal Line (Alternate) (match ID 5)
* Change 1 Part Trans-Clear 3004 Brick 1 x 2 {match ID 0 to 5}
Comments from Submitter:
I didn't catch it when I got the set, but I have kept the set together as I sold it off. I went to take a catalog pic last night and found it was a different variant.
|
|
Author: | Hygrotus | Posted: | Nov 25, 2019 15:50 | Subject: | Inventory Change Request for Set 75105-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 14769pb293 Light Bluish Gray Tile, Round 2 x 2 with Bottom Stud Holder with Dark Bluish Gray Fan Pattern (Sticker)
Comments from Submitter:
Exactly the same sticker as in set 7965 and 75257. But in set is on older mold, now I added it on newer mold, but in set 75257 is DBG tile hre is on LBG tile. Instruction page 121.
|
|
Author: | Roxyncz | Posted: | Nov 25, 2019 13:29 | Subject: | Inventory Change Request for Set 60070-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6239pb082 White Tail Shuttle with Dark Blue Stripe and '02' in White Circle Pattern on Both Sides (Stickers) - Set 60070 (Counterpart)
* Add 2 Part 30413pb068 White Panel 1 x 4 x 1 with Dark Blue 'POLICE' on White Background Pattern (Sticker) - Set 60070 (Counterpart)
* Add 2 Part 6636pb205 Dark Tan Tile 1 x 6 with Wood Grain and 3 Nails Pattern (Sticker) - Set 60070 (Counterpart)
|
|
Author: | Roxyncz | Posted: | Nov 25, 2019 13:03 | Subject: | Inventory Change Request for Set 60070-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 45677pb119 Dark Blue Wedge 4 x 4 x 2/3 Triple Curved with Silver Police Badge with Wings Pattern (Sticker) - Set 60070 (Counterpart)
|
|
Author: | Turez | Posted: | Nov 25, 2019 10:02 | Subject: | Re: Inventory Change Request for Set 7838-1 | Viewed: | 27 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| This set was released between 1983-84
|
It is shown in european catalogs from 1985, so my guess is it was still produced
in that year. Based on...
|
* | | 4275 Hinge Plate 1 x 2 with 3 Fingers on End (Undetermined Type) Parts: Hinge |
and
* | | 4276 Hinge Plate 1 x 2 with 2 Fingers on End (Undetermined Type) Parts: Hinge |
with hollow stud were first produced in 1985.
|
...it is possible that late copies came with the hollow stud variant, isn't
it?
|
|
Author: | axaday | Posted: | Nov 25, 2019 08:42 | Subject: | Re: Verifying Clickits 7518 | Viewed: | 24 times | Topic: | Inventories | |
|
| In Inventories, axaday writes:
| I have here and I'm trying to verify and repair the inventory
and I have a question for someone who has done one of these. The inventory said
I would find a lot of undetermined pieces and once again I have been disappointed.
But I have found that several of the lots are mixed between the frosted and
polished versions. Should I say the set has 5 polished versions and 2 frosted
versions like someone carefully made it this way or should I say there are 7
polished ones with 7 frosted ones as an alternate?
|
I am talking to myself here, I know, but I'm talking with 18 months of experience
and much more Clikits knowledge. If I don't get around to getting a more
concrete answer from more sealed sets, I can at least answer one question more
definitively. After opening and inspecting sealed copies of almost every Clikits
set, I have never found a mixture of frosted and polished in the same color again.
Not once. So what I feared was going to be a normal slushy thing with Clikits,
I now believe is unique to this set.
Unfortunately, I cannot find that I made a record of the distribution I got the
first time. But when another 7518 is opened, I believe the inventory should
be changed to reflect exactly what is in that set rather than alternates.
|
|
Author: | legofanit | Posted: | Nov 25, 2019 08:34 | Subject: | Re: Inventory Change Request for Set 7838-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
|
No credo che hai ragione!
Is your set new or did you buy it used?
This set was released between 1983-84 but the black hinges
* | | 4275 Hinge Plate 1 x 2 with 3 Fingers on End (Undetermined Type) Parts: Hinge |
and
* | | 4276 Hinge Plate 1 x 2 with 2 Fingers on End (Undetermined Type) Parts: Hinge |
with hollow stud were first produced in 1985. I have a very late new copy (with
box opened but the plastic bags sealed) that comes also with black
and
|
The set was given to me as a gift when I was a child. I don't remember exactly
when but I think it was in the second half of the 80s. It was NEW, SEALED and
I'm the first and only owner of this set. I don't have any other lego
sets with similar pieces.
According to Bricklink the 4276a pieces were made between 1981 and 1986 and the
2 4276 pices in my set were made between 1981 and 2006.
As I wrote before also Rebrickable says that it looks like that has been superseded
by LEGO Part 4276 (called 4726b on Rebrickable) with Hollow Studs.
I've uploaded a picture.
|
|
|
Author: | rkoon | Posted: | Nov 25, 2019 04:43 | Subject: | Inventory Change Request for Set 6399-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 12 Part White {2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip to 2412a Tile, Modified 1 x 2 Grille without Bottom Groove / Lip}
|
|
Author: | Captain_Q | Posted: | Nov 25, 2019 04:25 | Subject: | Re: streamline payment process | Viewed: | 33 times | Topic: | Suggestions | |
|
| In Suggestions, Akhoover writes:
| The process for payment, when buying from multiple vendors should not be so time
consuming. I purchased from 21 vendors, still waiting to hear from one. but the
checkout time was very lengthy, possible look at how amazon checks out.
|
As BrainOfTheBrick has stated, Bricklink is not like amazon but, imo, more like
a Lego flea market with thousands of different stores with a lot of different
styles of selling. Amazon can combine all your items into one purchase and potentially
combine shipping for some items, if applicable.
If you are looking for quicker ways to purchase on Bricklink then you could stick
to the Bricklink stores that use "Instant Checkout", signified by having a lightning
bolt. That way you don't have to wait for a store owner to send you a manual
invoice.
Regards,
- CaptainQ
|
|
Author: | Brickwilbo | Posted: | Nov 25, 2019 01:37 | Subject: | Re: streamline payment process | Viewed: | 28 times | Topic: | Suggestions | |
|
| In Suggestions, Akhoover writes:
| The process for payment, when buying from multiple vendors should not be so time
consuming. I purchased from 21 vendors, still waiting to hear from one. but the
checkout time was very lengthy, possible look at how amazon checks out.
|
Check your email spam folder for invoice emails from @Bricklink.
Probably at least a few of those 21 stores use instant checkout, Bricklink automatically
sends invoices.
|
|
Author: | BrainOfTheBrick | Posted: | Nov 24, 2019 22:06 | Subject: | Re: streamline payment process | Viewed: | 36 times | Topic: | Suggestions | |
|
| In Suggestions, Akhoover writes:
| The process for payment, when buying from multiple vendors should not be so time
consuming. I purchased from 21 vendors, still waiting to hear from one. but the
checkout time was very lengthy, possible look at how amazon checks out.
|
You really shouldn't compare amazon and BrickLink. They are two completely
different sites which run completely differently.
|
|
Author: | Akhoover | Posted: | Nov 24, 2019 21:58 | Subject: | streamline payment process | Viewed: | 78 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| The process for payment, when buying from multiple vendors should not be so time
consuming. I purchased from 21 vendors, still waiting to hear from one. but the
checkout time was very lengthy, possible look at how amazon checks out.
|
Author: | Turez | Posted: | Nov 24, 2019 15:47 | Subject: | Inventory Change Request for Set 8896-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Lime {50860c02 Motorcycle Dirt Bike with Black Chassis (Undetermined Fairing Mounts) and Light Bluish Gray Wheels to 50860c11 Motorcycle Dirt Bike with Black Chassis (Long Fairing Mounts) and Light Bluish Gray Wheels} (Counterpart)
|
|
Author: | Turez | Posted: | Nov 24, 2019 15:44 | Subject: | Inventory Change Request for Set 951808-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Blue {50860c02 Motorcycle Dirt Bike with Black Chassis (Undetermined Fairing Mounts) and Light Bluish Gray Wheels to 50860c11 Motorcycle Dirt Bike with Black Chassis (Long Fairing Mounts) and Light Bluish Gray Wheels} (Counterpart)
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|