Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | normann1974 | Posted: | Oct 9, 2019 10:48 | Subject: | Inventory Change Request for Minifig sh448 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 973pb3677c01 Yellow Torso Muscles Outline, with Yellow V and Belt Pattern (Giant-Man Hank Pym) / Blue Arms / Yellow Hands
Comments from Submitter:
Missing torso now added. Please remove inventory note.
|
|
Author: | bje | Posted: | Oct 9, 2019 09:55 | Subject: | Re: Negative Quantity / Stockroom | Viewed: | 51 times | Topic: | Inventories | |
|
| Old problem - use this link to frequently check if your store returns 0 quantities
or negatives.
https://www.bricklink.com/search.asp?viewFrom=sa&qMax=0&pMin=.01&itemBrand=0&itemType=P&searchSort=P&sz=25
I should think stores with this problem should just delete those lots. Of course
it would help if some admin somewhere could alert the respective stores, sigh.
In Inventories, Teup writes:
| Any admin to comment on this? I would also really like to know.
In Inventories, BrickFlo writes:
| No reaction on any channel until now.
In Inventories, Leftoverbricks writes:
| In Inventories, BrickFlo writes:
| Good morning and Greetings from Germany
Tonight I got that order as shown. Every ordered part is physically in my shop
and I can do the order without problems.
But of course, I'm kind of scared about the negative quantity left?!?
With kind regards,
Florian
|
Nobody to comment on this?
|
|
|
|
|
Author: | Teup | Posted: | Oct 9, 2019 08:58 | Subject: | Re: Negative Quantity / Stockroom | Viewed: | 51 times | Topic: | Inventories | |
|
| Any admin to comment on this? I would also really like to know.
In Inventories, BrickFlo writes:
| No reaction on any channel until now.
In Inventories, Leftoverbricks writes:
| In Inventories, BrickFlo writes:
| Good morning and Greetings from Germany
Tonight I got that order as shown. Every ordered part is physically in my shop
and I can do the order without problems.
But of course, I'm kind of scared about the negative quantity left?!?
With kind regards,
Florian
|
Nobody to comment on this?
|
|
|
|
Author: | BrickFlo | Posted: | Oct 9, 2019 08:51 | Subject: | Re: Negative Quantity / Stockroom | Viewed: | 41 times | Topic: | Inventories | |
|
| No reaction on any channel until now.
In Inventories, Leftoverbricks writes:
| In Inventories, BrickFlo writes:
| Good morning and Greetings from Germany
Tonight I got that order as shown. Every ordered part is physically in my shop
and I can do the order without problems.
But of course, I'm kind of scared about the negative quantity left?!?
With kind regards,
Florian
|
Nobody to comment on this?
|
|
|
Author: | Mirko8710 | Posted: | Oct 9, 2019 08:32 | Subject: | Inventory Change Request for Set 76120-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 52031pb134 Blue Wedge 4 x 6 x 2/3 Triple Curved with Yellow and Blue Badge, Black Bird, White Stars, Stripes and 'POLICE' Pattern (Sticker) - Set 76120 (Counterpart)
* Add 1 Part 47753pb086 Black Wedge 4 x 4 No Top Studs with Flat Silver Air Vents Pattern (Sticker) - Set 76120 (Counterpart)
* Add 1 Part 15535pb05 Light Bluish Gray Tile, Round 2 x 2 with Hole with Black Safe Gear Pattern (Sticker) - Set 76120 (Counterpart)
* Add 1 Part 3069bpb746 White Tile 1 x 2 with Groove with 'GO-2JA1L' License Plate Pattern (Sticker) - Set 76120 (Counterpart)
* Add 1 Part 6239pb080 Green Tail Shuttle with Dark Purple Question Marks on Green Background Pattern on Both Sides (Stickers) - Set 76120 (Counterpart)
* Add 1 Part 93606pb095 Black Slope, Curved 4 x 2 No Studs with Hull Plates and Yellow Batman Logo Pattern (Sticker) - Set 76120 (Counterpart)
* Add 1 Part 85984pb231 Dark Bluish Gray Slope 30 1 x 2 x 2/3 with Yellow Gauges on Black Background Pattern (Sticker) - Set 76120 (Counterpart)
* Add 1 Part 87552pb053 Black Panel 1 x 2 x 2 with Side Supports - Hollow Studs with Dark Bluish Gray Security Code Panel, Buttons and '0000' Pattern (Sticker) - Set 76120 (Counterpart)
* Add 2 Part 60601pb024 Dark Green Glass for Window 1 x 2 x 2 with Yellow Dollar Symbol Pattern (Sticker) - Set 76120 (Counterpart)
* Add 1 Part 3010pb275R Blue Brick 1 x 4 with Yellow Badge with Black Star and 'GCPD' Pattern Model Right Side (Sticker) - Set 76120 (Counterpart)
* Add 1 Part 3010pb275L Blue Brick 1 x 4 with Yellow Badge with Black Star and 'GCPD' Pattern Model Left Side (Sticker) - Set 76120 (Counterpart)
|
|
Author: | Give.Me.A.Brick | Posted: | Oct 9, 2019 08:00 | Subject: | Re: Classic Wanted List Unavailable on June 5th | Viewed: | 95 times | Topic: | Suggestions | |
|
| In Administrative, DadsAFOL writes:
| In Administrative, Admiral_Brick writes:
| Hello Jaclyn,
one year ago BL changed a wanted list key feature. Are you and the developers
even aware of it?
When clicking on "Wanted List" after entering a store, BL shows me the items
this store offers which are on my wanted list. Before the update, the list only
contained the items from my wanted list which were priced below my max prices.
This changed with the update of the store fronts: Now always *all* items are
being shown. The only difference is, that the "Max price:" information of items
with prices higher than my max prices is being shown in red letters.
Too much information! I do not want to scroll through the bigger part of my wanted
list every time, I simply want to know quickly which items from my wanted list
are available for a good price in a specific store... no chance. I have not used
my wanted list for a year now.
Kind regards,
Matthias
|
I agree, I had forgotten about this. I think its part of the store display,
not the wanted list functions, but I agree. It is a huge pain to see unfiltered
wanted list matches in each store. Please add the filter options back!
1. Store price
2. Store quantity = wanted list min quantity
3. Both price and quantity match.
Thanks!
|
Has this issued been sorted out? Or are there any tweaks?
When inside a store, is there way to see only the items on my wanted list *below*
my max price?
Thank you.
|
|
Author: | Teup | Posted: | Oct 9, 2019 07:55 | Subject: | Re: releasing items from the stockroom | Viewed: | 33 times | Topic: | Inventories | |
|
| In Inventories, kelmgo writes:
| Is there any way of releasing (listing) the entire contents of a stockroom in
one hit or do I have to list every item individually
|
You wrote "a stockroom", so maybe you have the multiple stockrooms option switched
on, but if you only have one stockroom, this is how to change the availability
status:
On your inventory page, at the bottom there's "Update My Inventory:".
Select the radio button for "Change availability status to X Store Item Stockroom
Item"
In the dialog below, change "update only items in above selected categories"
to "Update my whole inventory". Then click "submit changes".
It's truly horrible interfacing, and extremely error-prone, but if you sit
tight you'll get through it
|
|
Author: | kelmgo | Posted: | Oct 9, 2019 07:36 | Subject: | releasing items from the stockroom | Viewed: | 67 times | Topic: | Inventories | Status: | Open | |
|
| Is there any way of releasing (listing) the entire contents of a stockroom in
one hit or do I have to list every item individually
|
|
Author: | Hurt | Posted: | Oct 9, 2019 06:13 | Subject: | Re: How rare is a flat silver 2x4 brick? | Viewed: | 74 times | Topic: | Colors | |
|
| In Colors, yorbrick writes:
| | And another seven messages - you don't get it yet so I will repeat my advice
again: Please use fewer messages for more content. It saves people time reading
these posts and it makes it much easier to navigate the forum. Thanks in advance.
|
Just in case anyone else needs it, the ignore user feature can be turned on at
the bottom of this settings page ...
https://www.bricklink.com/messageFilter.asp?viewFrom=P
Enter the username and just a couple of clicks and it all goes away forever.
|
Thanks! Didn't know that feature exists
|
Author: | bje | Posted: | Oct 9, 2019 05:32 | Subject: | Re: Inventory Change Request for Set 5318-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| Image |
|
Author: | bje | Posted: | Oct 9, 2019 05:30 | Subject: | Inventory Change Request for Set 5318-1 | Viewed: | 36 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 2447 Trans-Light Blue Minifigure, Visor Standard (Extra)
Comments from Submitter:
From sealed set, image to follow
|
|
Author: | yorbrick | Posted: | Oct 9, 2019 04:07 | Subject: | Re: How rare is a flat silver 2x4 brick? | Viewed: | 76 times | Topic: | Colors | |
|
| | And another seven messages - you don't get it yet so I will repeat my advice
again: Please use fewer messages for more content. It saves people time reading
these posts and it makes it much easier to navigate the forum. Thanks in advance.
|
Just in case anyone else needs it, the ignore user feature can be turned on at
the bottom of this settings page ...
https://www.bricklink.com/messageFilter.asp?viewFrom=P
Enter the username and just a couple of clicks and it all goes away forever.
|
|
Author: | paulvdb | Posted: | Oct 8, 2019 23:28 | Subject: | Re: Inventory Change Request for Set 5974-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, laulainendebra writes:
| Please make changes to the following inventory:
* Add 1 Part 4733 Black Brick, Modified 1 x 1 with Studs on 4 Sides
* Add 1 Part 48729 Dark Bluish Gray Bar 1L with Clip Mechanical Claw
Comments from Submitter:
Someone should be comparing LEGO inventory of this set to what is listed on Bricklink. There are more pieces missing than this one.
|
These parts are included in the inventory of the droid minifigure.
|
|
Author: | tEoS | Posted: | Oct 8, 2019 20:10 | Subject: | Re: Inventory Change Request for Set 5974-1 | Viewed: | 17 times | Topic: | Inventories Requests | |
|
| Check the minifig section of this set. That's where some of the parts are.
In Inventories Requests, laulainendebra writes:
| Please make changes to the following inventory:
* Add 1 Part 4733 Black Brick, Modified 1 x 1 with Studs on 4 Sides
* Add 1 Part 48729 Dark Bluish Gray Bar 1L with Clip Mechanical Claw
Comments from Submitter:
Someone should be comparing LEGO inventory of this set to what is listed on Bricklink. There are more pieces missing than this one.
|
|
|
Author: | laulainendebra | Posted: | Oct 8, 2019 19:42 | Subject: | Inventory Change Request for Set 5974-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 4697b Light Bluish Gray Pneumatic T Piece Second Version (T Bar with Ball in Center)
* Add 2 Part 48729 Dark Bluish Gray Bar 1L with Clip Mechanical Claw
|
Author: | laulainendebra | Posted: | Oct 8, 2019 19:38 | Subject: | Inventory Change Request for Set 5974-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3070b White Tile 1 x 1 with Groove (3070)
* Add 4 Part 6266 White Leg Skeleton
* Add 2 Part 2555 White Tile, Modified 1 x 1 with Clip
|
|
Author: | laulainendebra | Posted: | Oct 8, 2019 19:25 | Subject: | Inventory Change Request for Set 5974-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4733 Black Brick, Modified 1 x 1 with Studs on 4 Sides
* Add 1 Part 48729 Dark Bluish Gray Bar 1L with Clip Mechanical Claw
Comments from Submitter:
Someone should be comparing LEGO inventory of this set to what is listed on Bricklink. There are more pieces missing than this one.
|
|
Author: | randyf | Posted: | Oct 8, 2019 17:37 | Subject: | Re: 44140 coloration | Viewed: | 28 times | Topic: | Colors | |
|
| You can't trust set images to show the correct colors of parts, since many
of them are computer-rendered images and not representative of the actual parts.
Why don't you post an image of the part you have next to something that you
know for a fact is Pearl Dark Gray? It is known fact that some of the old Pearl
Dark Gray parts could be somewhat yellowish/greenish.
Cheers,
Randy
In Colors, Shrapnil writes:
| Here is a comarison of the two pictures. Those two pieces are supposed to be
the same color.According to bricklinks inventory.
|
|
|
Author: | Mirko8710 | Posted: | Oct 8, 2019 16:21 | Subject: | Inventory Change Request for Set 76102-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 15068pb209R Sand Blue Slope, Curved 2 x 2 No Studs with Orange and Light Bluish Gray Hull Plates Pattern Model Right Side (Sticker) - Set 76102 (Counterpart)
* Add 1 Part 15068pb209L Sand Blue Slope, Curved 2 x 2 No Studs with Orange and Light Bluish Gray Hull Plates Pattern Model Left Side (Sticker) - Set 76102 (Counterpart)
* Add 1 Part 87552pb052R Light Bluish Gray Panel 1 x 2 x 2 with Side Supports - Hollow Studs with Dark Bluish Gray Hull Plates and Orange Stripe Pattern Model Right Side (Sticker) - Set 76102 (Counterpart)
* Add 1 Part 87552pb052L Light Bluish Gray Panel 1 x 2 x 2 with Side Supports - Hollow Studs with Dark Bluish Gray Hull Plates and Orange Stripe Pattern Model Left Side (Sticker) - Set 76102 (Counterpart)
* Add 2 Part 22886pb02 Light Bluish Gray Brick 1 x 2 x 3 with Light Bluish Gray, Dark Bluish Gray and Orange Hull Plates Pattern (Sticker) - Set 76102 (Counterpart)
|
|
Author: | Mirko8710 | Posted: | Oct 8, 2019 16:17 | Subject: | Inventory Change Request for Set 76114-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 3 Part 63864pb086R Green Tile 1 x 3 with Dark Green Stripe and Black Lines Pattern Model Right Side (Sticker) - Set 76114 (Counterpart)
* Add 3 Part 63864pb086L Green Tile 1 x 3 with Dark Green Stripe and Black Lines Pattern Model Left Side (Sticker) - Set 76114 (Counterpart)
* Add 2 Part 11477pb077 Red Slope, Curved 2 x 1 No Studs with Black Spider Web Pattern (Sticker) - Set 76114 (Counterpart)
* Add 8 Part 47456pb015 Red Brick, Modified 2 x 3 x 2/3 Two Studs, Wing End with Black Lines and Blue Hull Plates Pattern (Sticker) - Set 76114 (Counterpart)
|
|
Author: | Shrapnil | Posted: | Oct 8, 2019 15:45 | Subject: | Re: 44140 coloration | Viewed: | 29 times | Topic: | Colors | |
|
| I have that same part(upper leg armor of dinosaur looking thing). Looking at
it with the naked eye it is still that greenish color.
In Colors, mandr writes:
| In Colors, Shrapnil writes:
| I have multiple colors of 44140. One of the colors seems to not match anything
in the system. There are two sets that say they have pearl dark grey but the
pictures have different colors on each set. Set 8811-1 shows the exact color
that I have but says that it should be pearl dark grey. Set 8593-1 shows the
same part as supposed to be pearl dark grey but shows a different coloration
from the one I have. Does anyone know if this is just a different color and should
be added to the system? Or do the pearl dark grey ones always look like more
of a greenish color(like in the picture for set 8811-1)
|
Not sure if I can be of any help, but here are two pictures of my sets 8593 and
8811.
I do notice on set 8811 that the part does look slightly greenish on my monitor,
but then again, set 8811 is made with the Dark-Bluish Grays whereas the 8593
set is an older set made with the older Dark-Gray. So I thought the greenish
tone was because the part is side-by-side a bluish gray (in 8811) rather than
a somewhat greenish-gray (8593). Also I took the pictures in different settings,
so that might have an effect, and I am not a photographer.
First picture is 8811. Second picture, 8593
|
|
|
Author: | mandr | Posted: | Oct 8, 2019 15:41 | Subject: | Re: 44140 coloration | Viewed: | 28 times | Topic: | Colors | |
|
| In Colors, Shrapnil writes:
| I have multiple colors of 44140. One of the colors seems to not match anything
in the system. There are two sets that say they have pearl dark grey but the
pictures have different colors on each set. Set 8811-1 shows the exact color
that I have but says that it should be pearl dark grey. Set 8593-1 shows the
same part as supposed to be pearl dark grey but shows a different coloration
from the one I have. Does anyone know if this is just a different color and should
be added to the system? Or do the pearl dark grey ones always look like more
of a greenish color(like in the picture for set 8811-1)
|
Not sure if I can be of any help, but here are two pictures of my sets 8593 and
8811.
I do notice on set 8811 that the part does look slightly greenish on my monitor,
but then again, set 8811 is made with the Dark-Bluish Grays whereas the 8593
set is an older set made with the older Dark-Gray. So I thought the greenish
tone was because the part is side-by-side a bluish gray (in 8811) rather than
a somewhat greenish-gray (8593). Also I took the pictures in different settings,
so that might have an effect, and I am not a photographer.
First picture is 8811. Second picture, 8593
|
|
|
Author: | Shrapnil | Posted: | Oct 8, 2019 15:30 | Subject: | Re: 44140 coloration | Viewed: | 19 times | Topic: | Colors | |
|
| Here is a comarison of the two pictures. Those two pieces are supposed to be
the same color.According to bricklinks inventory.
In Colors, Shrapnil writes:
| I have that exact part and this does not match it. It also does not match anything
in the system. Except for one of the pieces in the picture for set 8811-1. It
matches the upper leg color and it is the same part as in the picture. Maybe
this is a different color that needs to be added to the system? Or possibly a
variant of the pearl dark grey color?
In Colors, randyf writes:
| In Colors, Shrapnil writes:
| I have multiple colors of 44140. One of the colors seems to not match anything
in the system. There are two sets that say they have pearl dark grey but the
pictures have different colors on each set. Set 8811-1 shows the exact color
that I have but says that it should be pearl dark grey. Set 8593-1 shows the
same part as supposed to be pearl dark grey but shows a different coloration
from the one I have. Does anyone know if this is just a different color and should
be added to the system? Or do the pearl dark grey ones always look like more
of a greenish color(like in the picture for set 8811-1).
|
https://www.flickr.com/photos/126975831@N07/17768155498
If the part is [old] Pearl Dark Gray, it should look like the color of the part
listed as LEGO color 148 Dark Grey Metallic in that image.
Cheers,
Randy
|
|
|
|
|
Author: | Shrapnil | Posted: | Oct 8, 2019 15:18 | Subject: | Re: 44140 coloration | Viewed: | 35 times | Topic: | Colors | |
|
| I have that exact part and this does not match it. It also does not match anything
in the system. Except for one of the pieces in the picture for set 8811-1. It
matches the upper leg color and it is the same part as in the picture. Maybe
this is a different color that needs to be added to the system? Or possibly a
variant of the pearl dark grey color?
In Colors, randyf writes:
| In Colors, Shrapnil writes:
| I have multiple colors of 44140. One of the colors seems to not match anything
in the system. There are two sets that say they have pearl dark grey but the
pictures have different colors on each set. Set 8811-1 shows the exact color
that I have but says that it should be pearl dark grey. Set 8593-1 shows the
same part as supposed to be pearl dark grey but shows a different coloration
from the one I have. Does anyone know if this is just a different color and should
be added to the system? Or do the pearl dark grey ones always look like more
of a greenish color(like in the picture for set 8811-1).
|
https://www.flickr.com/photos/126975831@N07/17768155498
If the part is [old] Pearl Dark Gray, it should look like the color of the part
listed as LEGO color 148 Dark Grey Metallic in that image.
Cheers,
Randy
|
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|