Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | Mistress_Lisa  | | Posted: | Jul 8, 2019 18:02 | | Subject: | Re: From Champ to Loser | | Viewed: | 145 times | | Topic: | Suggestions | |
|
| In Suggestions, superchicken77 writes:
| | I have no idea what this is about. Can anyone enlighten me?
In Suggestions, bwes writes:
| | You can buy the loser in my shop
|
|
Maybe because the US women won the world cup by beating Netherlands 2-0?
So perhaps there are some soccer players in his inventory?
Lisa
|
 |
| Author: | Turez | | Posted: | Jul 8, 2019 17:17 | | Subject: | Inventory Change Request for Set 8022-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Light Gray {3650a Technic, Gear 24 Tooth Crown (1st Version - Not Reinforced) to 3650b Technic, Gear 24 Tooth Crown (2nd Version - Reinforced)}
Comments from Submitter:
I didn't find photos of sealed set contents here. However, based on my recent inventory change requests, I think the transition from 3650a to 3650b is quite clear now.
- 3650a was included in sets until 1991. We have proof that two sets (8074 and 8856) released in 1991 came with 3650a in early and 3650b in later copies.
- 3650b was included in a copy of set 8837 which was produced in March 1992.
- During my research, I didn't find 3650a in any set released after 1991.
(If this request is accepted, I will continue with the remaining wrong and undetermined entries of this part.)
|
|
| Author: | axaday | | Posted: | Jul 8, 2019 17:07 | | Subject: | Re: From Champ to Loser | | Viewed: | 93 times | | Topic: | Suggestions | |
|
| In Suggestions, superchicken77 writes:
| | I have no idea what this is about. Can anyone enlighten me?
In Suggestions, bwes writes:
| | You can buy the loser in my shop
|
|
Care Bears 2?
|
| Author: | axaday | | Posted: | Jul 8, 2019 16:32 | | Subject: | Inventory Change Request for Set 7531-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part clikits018 Trans-Dark Pink Clikits Cord, Jelly String with 2 Caps - 375mm - top attachment (Alternate) (match ID 1)
* Change 1 Part Trans-Pink clikits018 Clikits Cord, Jelly String with 2 Caps - 375mm - top attachment {match ID 0 to 1}
Comments from Submitter:
My set contained dark. Much too late for a sealed pic, but I've had it under control since opening it.
|
|
| Author: | superchicken77 | | Posted: | Jul 8, 2019 16:17 | | Subject: | Re: From Champ to Loser | | Viewed: | 105 times | | Topic: | Suggestions | |
|
| I have no idea what this is about. Can anyone enlighten me?
In Suggestions, bwes writes:
| | You can buy the loser in my shop
|
|
|
| Author: | BricksShop | | Posted: | Jul 8, 2019 15:17 | | Subject: | Inventory Change Request for Set 60068-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 18904c01pb01 Dark Green Alligator / Crocodile with 20 Teeth with Yellow Eyes Pattern with Blue Technic, Pin 1/2
* Add 1 Part 18904 Dark Green Alligator / Crocodile Body with 10 Lower Teeth
* Add 1 Part 18905pb01 Dark Green Alligator / Crocodile Head Upper Jaw with Yellow Eyes Pattern
* Add 1 Part 18906 Dark Green Alligator / Crocodile Tail with Hole
* Add 1 Part 18904c01pb01 Dark Green Alligator / Crocodile with 20 Teeth with Yellow Eyes Pattern with Blue Technic, Pin 1/2 (Alternate)
* Change {1 to 2} Part Blue 4274 Technic, Pin 1/2
Comments from Submitter:
The Crocodile is delivered as single parts according the parts list at the end of instruction #4. The Assembled Crocodile should be added as an alternative part.
|
|
| Author: | axaday | | Posted: | Jul 8, 2019 13:55 | | Subject: | Re: Inventory Change Request for Set 7518-1 | | Viewed: | 15 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| | In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Change 2 Part {Orange to (Not Applicable)} clikits076 Clikits Paper, Insert 4 x 4 for Frame clikits011, Flowers Image
Comments from Submitter:
The other papers in Clikits and everywhere are 0-Not Applicable.
|
I was just looking at this part yesterday and saying I needed to get it changed.
Thanks for doing the work for me! 
|
Just shoring up for a tsunami.
|
|
| Author: | randyf | | Posted: | Jul 8, 2019 12:51 | | Subject: | Re: Inventory Change Request for Set 7518-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Change 2 Part {Orange to (Not Applicable)} clikits076 Clikits Paper, Insert 4 x 4 for Frame clikits011, Flowers Image
Comments from Submitter:
The other papers in Clikits and everywhere are 0-Not Applicable.
|
I was just looking at this part yesterday and saying I needed to get it changed.
Thanks for doing the work for me!
|
|
| Author: | randyf | | Posted: | Jul 8, 2019 12:44 | | Subject: | Re: Inventory Change Request for Set 1060-1 | | Viewed: | 35 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, elias3 writes:
| | In Inventories Requests, paulvdb writes:
| | In Inventories Requests, zorbanyc writes:
| | Please make changes to the following inventory:
* Add 6 Part 3031 Light Gray Plate 4 x 4
|
I see that you have a new set for sale in your store. I assume that set is the
source for this request?
|
Maybe some pictures with detail from the 4x4 plates (time area...)?
|
Yes, I would also like to see some images of this.
Cheers,
Randy
|
|
| Author: | axaday | | Posted: | Jul 8, 2019 11:28 | | Subject: | Inventory Change Request for Set 7513-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part {Orange to (Not Applicable)} clikits076 Clikits Paper, Insert 4 x 4 for Frame clikits011, Flowers Image
Comments from Submitter:
This is to get all papers handled the same way.
|
|
| Author: | axaday | | Posted: | Jul 8, 2019 11:25 | | Subject: | Inventory Change Request for Set 7518-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part {Orange to (Not Applicable)} clikits076 Clikits Paper, Insert 4 x 4 for Frame clikits011, Flowers Image
Comments from Submitter:
The other papers in Clikits and everywhere are 0-Not Applicable.
|
|
| Author: | elias3 | | Posted: | Jul 8, 2019 08:16 | | Subject: | Re: Inventory Change Request for Set 1060-1 | | Viewed: | 38 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
| | In Inventories Requests, zorbanyc writes:
| | Please make changes to the following inventory:
* Add 6 Part 3031 Light Gray Plate 4 x 4
|
I see that you have a new set for sale in your store. I assume that set is the
source for this request?
|
Maybe some pictures with detail from the 4x4 plates (time area...)?
|
|
| Author: | randyf | | Posted: | Jul 8, 2019 00:24 | | Subject: | Inventory Change Request for Set 9788-1 | | Viewed: | 38 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 26 Part Black {32064 Technic, Brick 1 x 2 with Axle Hole to 32064c Technic, Brick 1 x 2 with Axle Hole and Inside Side Supports}
* Change 8 Part Red {32064 Technic, Brick 1 x 2 with Axle Hole to 32064c Technic, Brick 1 x 2 with Axle Hole and Inside Side Supports}
* Change 1 Part Yellow {75c19 Hose, Rigid 3mm D. 19L / 15.2cm to 75c16 Hose, Rigid 3mm D. 16L / 12.8cm}
* Change 24 Part Yellow {32064 Technic, Brick 1 x 2 with Axle Hole to 32064c Technic, Brick 1 x 2 with Axle Hole and Inside Side Supports}
Comments from Submitter:
Changes based on sealed set contents from message https://www.bricklink.com/message.asp?ID=1146182
|
|
| Author: | bb598 | | Posted: | Jul 7, 2019 23:45 | | Subject: | Re: 10205 : Parts to be removed from Inventory | | Viewed: | 52 times | | Topic: | Inventories | |
|
| In Inventories, Sango85 writes:
| | In Inventories, FreeStorm writes:
| | In Inventories, Sango85 writes:
| | Hello,
I check my locomotive 10205 with Bricklink Inventory and I found differences...
I bought a new loco, and found the same differences...
I think there are errors into the Bricklink Inventory.
Please find the list of the issues.
Best regards,
Julien
|
To confirm the inventory, you can find an unboxing there:
http://www.brickshelf.com/cgi-bin/gallery.cgi?f=168313
If I remember correctly, the reason for "extra" parts is because the set
is the same as which is composed of
Some black parts are sort of 'extra' (from 3745-1) because this set is
used to build other locomotives
For example:
-Fred
|
OK, thanks for the explanation, and sorry for the "troubles"... I just wanted
to notice a possible issue, which is not an issue anyway.
Julien
|
The My Own Train locomotive sets 3740 and 3741 were designed to build TWO different
models with full instructions to do so. When building one or the other, there
will be pieces left over.
Here is the page from the instructions showing the alternate build that does
use each of the pieces you show in your original post.
http://lego.brickinstructions.com/03000/3741/013.jpg
These set inventories have stood unchanged for many years because they are accurate
and correct. They were produced and sold by LEGO back before there used to be
intentional Extra Pieces, so every piece in the inventory is needed to build
either the primary or the secondary model.
Also, the packs of colored bricks for these sets --
contain the correct parts to build either the
short locomotive or the long locomotive. When done building one or the other,
there will be different pieces left over, but all of the pieces are needed for
one or the other with no extra pieces at all.
____
|
|
|
| Author: | SezaR | | Posted: | Jul 7, 2019 23:15 | | Subject: | Inventory Change Request for Set 6931-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 6 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 6 Part 4624 Light Gray Wheel 8mm D. x 6mm
* Change 6 Part Light Gray 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
|
|
|
| Author: | SezaR | | Posted: | Jul 7, 2019 18:02 | | Subject: | Inventory Change Request for Set 6950-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 4 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
|
| Author: | Adjour | | Posted: | Jul 7, 2019 13:11 | | Subject: | Re: help identify this transformer part? | | Viewed: | 50 times | | Topic: | Catalog | |
|
| In Catalog, blackballoon writes:
| | i saw several similar transformer entries in the catalog but could not figure
out which one to list this as. Can someone kindly help to identify it?
|
I agree with the other poster, this looks like the ones I have for my 9v trains.
|
| Author: | Turez | | Posted: | Jul 7, 2019 12:25 | | Subject: | Re: Inventory Change Request for Set 9736-1 | | Viewed: | 12 times | | Topic: | Inventories Requests | |
|
| | . |
|
| Author: | Turez | | Posted: | Jul 7, 2019 12:25 | | Subject: | Inventory Change Request for Set 9736-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Light Gray {731c01 Technic, Shock Absorber 6.5L Undetermined Spring Type to 731c05 Technic, Shock Absorber 6.5L - Normal Spring}
Comments from Submitter:
Source: sealed set contents, Ebay completed listing 143177010925.
|
| Author: | Turez | | Posted: | Jul 7, 2019 11:35 | | Subject: | Re: Inventory Change Request for Set 8872-1 | | Viewed: | 14 times | | Topic: | Inventories Requests | |
|
| | . |
|
| Author: | Turez | | Posted: | Jul 7, 2019 11:33 | | Subject: | Inventory Change Request for Set 8872-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Light Gray {3650a Technic, Gear 24 Tooth Crown (1st Version - Not Reinforced) to 3650b Technic, Gear 24 Tooth Crown (2nd Version - Reinforced)}
Comments from Submitter:
Source: sealed set contents, Ebay listing 323437946029 and 254279558851.
Since we have proof now that 3650b already existed in March 1992 (set 8837), I highly doubt that 3650a was ever included here.
|
|
| Author: | normann1974 | | Posted: | Jul 7, 2019 11:31 | | Subject: | Inventory Change Request for Set 79101-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 53451 Black Barb / Claw / Horn - Small (Extra)
* Change 1 Part Black 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {Regular to Alternate} {match ID 1 to 1}
* Change 1 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} {Alternate to Regular} {match ID 1 to 1}
* Change 1 Part Dark Bluish Gray {44567 Hinge Plate 1 x 2 Locking with 1 Finger on Side (undetermined type) to 44567a Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove}
Comments from Submitter:
Found these variants and extra extras during part out.
|
|
| Author: | Turez | | Posted: | Jul 7, 2019 11:23 | | Subject: | Re: Inventory Change Request for Set 8837-1 | | Viewed: | 14 times | | Topic: | Inventories Requests | |
|
| | . |
|
|
| Author: | Turez | | Posted: | Jul 7, 2019 11:22 | | Subject: | Inventory Change Request for Set 8837-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Light Gray {3650a Technic, Gear 24 Tooth Crown (1st Version - Not Reinforced) to 3650b Technic, Gear 24 Tooth Crown (2nd Version - Reinforced)}
Comments from Submitter:
Source: sealed set contents.
Photos found on German site Ebay Kleinanzeigen (Ebay Classifieds), listing 1004287617. Fortunately, the batch code 1012 is visible, meaning this copy was produced in early March 1992. Since the release date was May 1992, it is very likely that this set always came with 3650b.
|
|
| Author: | zorbanj | | Posted: | Jul 7, 2019 08:27 | | Subject: | Re: Inventory Change Request for Set 1060-1 | | Viewed: | 35 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
| | In Inventories Requests, zorbanyc writes:
| | Please make changes to the following inventory:
* Add 6 Part 3031 Light Gray Plate 4 x 4
|
I see that you have a new set for sale in your store. I assume that set is the
source for this request?
|
Yes, that is correct.
|
|
| Author: | FreeStorm | | Posted: | Jul 7, 2019 08:07 | | Subject: | Re: help identify this transformer part? | | Viewed: | 55 times | | Topic: | Catalog | |
|
| In Catalog, blackballoon writes:
| | i saw several similar transformer entries in the catalog but could not figure
out which one to list this as. Can someone kindly help to identify it?
|
My guess is this one:
LEGO used several brands for those transformers.
|
| Author: | blackballoon | | Posted: | Jul 6, 2019 23:19 | | Subject: | help identify this transformer part? | | Viewed: | 107 times | | Topic: | Catalog | | Status: | Open | |
|
| i saw several similar transformer entries in the catalog but could not figure
out which one to list this as. Can someone kindly help to identify it?
|
|
| Author: | axaday | | Posted: | Jul 6, 2019 21:35 | | Subject: | Re: Question For Someone with Underminer Minifies | | Viewed: | 43 times | | Topic: | Catalog | |
|
| In Catalog, axaday writes:
| |
wears this cape
I am usually a fan of dynamically posed catalog pics, but this time I just can't
tell if this piece is the same cut as a new piece that I need to get into the
catalog. Can someone tell me if the attached pic is the same shape?
|
Seriously, how does autocorrect think that minifies is a word more than minifig
is?
|
|
| Author: | axaday | | Posted: | Jul 6, 2019 21:33 | | Subject: | Question For Someone with Underminer Minifies | | Viewed: | 97 times | | Topic: | Catalog | | Status: | Open | |
|
|
wears this cape
I am usually a fan of dynamically posed catalog pics, but this time I just can't
tell if this piece is the same cut as a new piece that I need to get into the
catalog. Can someone tell me if the attached pic is the same shape?
|
|
|
| Author: | axaday | | Posted: | Jul 6, 2019 20:10 | | Subject: | Inventory Change Request for Set 7531-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Gear clikits098c01 Trans-Dark Pink Clikits Sorting Tray 14 Compartment
* Delete 1 Gear clikits098 Trans-Dark Pink Clikits Sorting Tray 14 Compartment, Base
* Delete 1 Gear clikits099 Trans-Dark Pink Clikits Sorting Tray 14 Compartment, Lid
Comments from Submitter:
It comes built in the set.
|
|
| Author: | axaday | | Posted: | Jul 6, 2019 17:45 | | Subject: | Re: Inventory Change Request for Set 7512-1 | | Viewed: | 15 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Change 1 Part {Sky Blue to Trans-Very Lt Blue} clikits146 Clikits Tote (25 x 23 x 7 Studs) with 25 Holes
Comments from Submitter:
This is a color cleanup move.
|
|
|
| Author: | axaday | | Posted: | Jul 6, 2019 17:44 | | Subject: | Inventory Change Request for Set 7512-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part {Sky Blue to Trans-Very Lt Blue} clikits146 Clikits Tote (25 x 23 x 7 Studs) with 25 Holes
Comments from Submitter:
This is a color cleanup move.
|
|
| Author: | axaday | | Posted: | Jul 6, 2019 17:24 | | Subject: | Re: Inventory Change Request for Set 7512-1 | | Viewed: | 16 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| | In Inventories Requests, axaday writes:
| | In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Change 1 Part {Sky Blue to Trans-Light Blue} clikits146 Clikits Tote (25 x 23 x 7 Studs) with 25 Holes
Comments from Submitter:
Part of color correction operation
|
|
Don't you mean Trans-Very Light Blue?
|
That’s what I said.
|
|
| Author: | randyf | | Posted: | Jul 6, 2019 16:28 | | Subject: | Re: Inventory Change Request for Set 7512-1 | | Viewed: | 15 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| | In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Change 1 Part {Sky Blue to Trans-Light Blue} clikits146 Clikits Tote (25 x 23 x 7 Studs) with 25 Holes
Comments from Submitter:
Part of color correction operation
|
|
Don't you mean Trans-Very Light Blue?
|
|
| Author: | axaday | | Posted: | Jul 6, 2019 15:45 | | Subject: | Re: Inventory Change Request for Set 7512-1 | | Viewed: | 15 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Change 1 Part {Sky Blue to Trans-Light Blue} clikits146 Clikits Tote (25 x 23 x 7 Studs) with 25 Holes
Comments from Submitter:
Part of color correction operation
|
|
|
| Author: | axaday | | Posted: | Jul 6, 2019 15:44 | | Subject: | Inventory Change Request for Set 7512-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part {Sky Blue to Trans-Light Blue} clikits146 Clikits Tote (25 x 23 x 7 Studs) with 25 Holes
Comments from Submitter:
Part of color correction operation
|
|
| Author: | samsam2 | | Posted: | Jul 6, 2019 12:28 | | Subject: | Stickered Assembly numbering BA77pb01 | | Viewed: | 48 times | | Topic: | Catalog | | Status: | Open | |
|
| Not sure if sequence number for multiple stickered assembly parts from same set
should increment the 'pb01' to 'pb02' rather than from BA76pb01
to BA77pb01. The part I'm questioning is [p=BA77pb01] and if it should actually
become [p=BA76pb02]
|
|
| Author: | odurt | | Posted: | Jul 6, 2019 11:33 | | Subject: | Inventory Change Request for Set 70143-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 13349 Dark Bluish Gray Wedge 4 x 4 Triple Inverted with Connections between Studs (Alternate) (match ID 1)
* Change 1 Part Dark Bluish Gray 4855 Wedge 4 x 4 Triple Inverted {match ID 0 to 1}
Comments from Submitter:
From the inventory of a one time build. Never disassembled.
|
|
| Author: | TakeAbricK | | Posted: | Jul 5, 2019 23:50 | | Subject: | Inventory Change Request for Set 21000-2 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 6 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
source: Original set, bought Sealed
|
|
| Author: | DrFrag | | Posted: | Jul 5, 2019 21:27 | | Subject: | Inventory Change Request for Set 41196-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part {Trans-Neon Orange to Trans-Orange} 22388 Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid (Extra)
Comments from Submitter:
Set contains 1 Trans-Orange Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid, plus 1 spare. The spare is also Trans-Orange, not Trans-Neon Orange.
|
|
| Author: | randyf | | Posted: | Jul 5, 2019 20:12 | | Subject: | Re: Inventory Change Request for Set 7512-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| | In Inventories Requests, randyf writes:
| | In Inventories Requests, axaday writes:
| | It looks awful. I wish you had never asked me to do it or I had refused.
|
Yeah, that does look bad. I need to go scrub my eyes.
 
How does the thin portion of a Trans-Light Blue icon part compare to the color
of this strip? My wife took my strip to work, so I can't do it myself right
now. If you can, take a pic holding both up towards a light source like I showed
you for the Trans-Dark Pink ones. Remember, the Trans-Dark Pink flexy films were
much lighter looking when compared to Trans-Dark Pink icon parts until I held
them to the light looking at similar thicknesses. This may be a similar case
as the strip doesn't quite look like Trans-Very Light Blue.
Cheers,
Randy
|
I was called in to work for a couple of hours to do something super important.
I can check it this evening or tomorrow.
|
Oops. I forgot that I had this set, so I took a look at the flower flexies.
I am torn on what to do about these bluish-green parts, but I think we should
settle for Trans-Very Light Blue like you have suggested. These flexy films are
milkier than some of the other flexies I bought from you which makes the color
harder to nail down since they do not transmit light through them easily. If
the milky layer wasn't on it, it may look closer to Trans-Light Blue, but
as is looks closer to Trans-Very Light Blue for simplicity.
I will approve your requests for these parts.
Cheers,
Randy
|
|
| Author: | randyf | | Posted: | Jul 5, 2019 18:56 | | Subject: | Re: Inventory Change Request for Set 7512-1 | | Viewed: | 16 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| | In Inventories Requests, randyf writes:
| | In Inventories Requests, axaday writes:
| | It looks awful. I wish you had never asked me to do it or I had refused.
|
Yeah, that does look bad. I need to go scrub my eyes.
How does the thin portion of a Trans-Light Blue icon part compare to the color
of this strip? My wife took my strip to work, so I can't do it myself right
now. If you can, take a pic holding both up towards a light source like I showed
you for the Trans-Dark Pink ones. Remember, the Trans-Dark Pink flexy films were
much lighter looking when compared to Trans-Dark Pink icon parts until I held
them to the light looking at similar thicknesses. This may be a similar case
as the strip doesn't quite look like Trans-Very Light Blue.
Cheers,
Randy
|
I was called in to work for a couple of hours to do something super important.
|
Clogged toilets can be a "bummer".
| | I can check it this evening or tomorrow.
|
|
|
| Author: | axaday | | Posted: | Jul 5, 2019 18:50 | | Subject: | Re: Inventory Change Request for Set 7512-1 | | Viewed: | 14 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| | In Inventories Requests, axaday writes:
| | It looks awful. I wish you had never asked me to do it or I had refused.
|
Yeah, that does look bad. I need to go scrub my eyes.
How does the thin portion of a Trans-Light Blue icon part compare to the color
of this strip? My wife took my strip to work, so I can't do it myself right
now. If you can, take a pic holding both up towards a light source like I showed
you for the Trans-Dark Pink ones. Remember, the Trans-Dark Pink flexy films were
much lighter looking when compared to Trans-Dark Pink icon parts until I held
them to the light looking at similar thicknesses. This may be a similar case
as the strip doesn't quite look like Trans-Very Light Blue.
Cheers,
Randy
|
I was called in to work for a couple of hours to do something super important.
I can check it this evening or tomorrow.
|
|
| Author: | randyf | | Posted: | Jul 5, 2019 18:13 | | Subject: | Re: Inventory Change Request for Set 10116-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| | In Inventories Requests, randyf writes:
| | In Inventories Requests, axaday writes:
| | In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Change 2 Part {Dark Pink to Trans-Pink} clikits053 Clikits Flexy Film, Flower 5 Petals 3 x 3
* Change 2 Part {Aqua to Trans-Very Lt Blue} clikits053 Clikits Flexy Film, Flower 5 Petals 3 x 3
Comments from Submitter:
These are partly transparent and all the flexy films are moving to transparent colors. I will attach reference pics.
|
The pics show this pink flower with a trans-dark pink flexy film. And this "aqua"
flower with another flexy film the same color that I am also changing and a flexy
film called aqua that is a much better fit. And a picture of the two flexy films
I am changing to trans-very light blue with some trans-very light blue plastic
pieces and also trans-light blue.
|
Can you post an image of that pink flower next to Trans-Pink Clikits parts?
Thanks,
Randy
|
That looks better than I expected it would.
|
Beautiful. I will get the pink flower updated. Still going to hold off on the
"aqua" part.
|
|
| Author: | randyf | | Posted: | Jul 5, 2019 18:11 | | Subject: | Re: Inventory Change Request for Set 7512-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| | It looks awful. I wish you had never asked me to do it or I had refused.
|
Yeah, that does look bad. I need to go scrub my eyes.
How does the thin portion of a Trans-Light Blue icon part compare to the color
of this strip? My wife took my strip to work, so I can't do it myself right
now. If you can, take a pic holding both up towards a light source like I showed
you for the Trans-Dark Pink ones. Remember, the Trans-Dark Pink flexy films were
much lighter looking when compared to Trans-Dark Pink icon parts until I held
them to the light looking at similar thicknesses. This may be a similar case
as the strip doesn't quite look like Trans-Very Light Blue.
Cheers,
Randy
|
|
| Author: | axaday | | Posted: | Jul 5, 2019 17:33 | | Subject: | Re: Inventory Change Request for Set 10116-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| | In Inventories Requests, axaday writes:
| | In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Change 2 Part {Dark Pink to Trans-Pink} clikits053 Clikits Flexy Film, Flower 5 Petals 3 x 3
* Change 2 Part {Aqua to Trans-Very Lt Blue} clikits053 Clikits Flexy Film, Flower 5 Petals 3 x 3
Comments from Submitter:
These are partly transparent and all the flexy films are moving to transparent colors. I will attach reference pics.
|
The pics show this pink flower with a trans-dark pink flexy film. And this "aqua"
flower with another flexy film the same color that I am also changing and a flexy
film called aqua that is a much better fit. And a picture of the two flexy films
I am changing to trans-very light blue with some trans-very light blue plastic
pieces and also trans-light blue.
|
Can you post an image of that pink flower next to Trans-Pink Clikits parts?
Thanks,
Randy
|
That looks better than I expected it would.
|
|
|
| Author: | axaday | | Posted: | Jul 5, 2019 17:33 | | Subject: | Re: Inventory Change Request for Set 7512-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
|
| | It looks awful. I wish you had never asked me to do it or I had refused. |
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
USA, Washington
Germany, Niedersachsen
Canada, Ontario
Belgium, Oost-Vlaanderen
)
)
)
)
)
)
)
)
Denmark
)
)
)
Switzerland, Vaud
)
)
)
Netherlands, Gelderland
Australia, South Australia
