Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | StormChaser  | | Posted: | Feb 19, 2018 15:40 | | Subject: | Re: Inventory Change Request for Minifig poc012 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Brick_Genie writes:
| | Please make changes to the following inventory:
* Add 1 Part 3626cpb0555 Light Flesh Minifig, Head Dual Sided PotC Jack Black Moustache Determined / Skull Face Pattern - Stud Recessed
Comments from Submitter:
Alternate part for the head. Both the Blocked Open Stud and Stud Recessed versions were released.
|
Unfortunately, alternates are not allowed for minifigures. However, the minifigure
has an inventory note and someday this issue will be corrected (someday means
when the minifigure parts can be included in the inventory and figures themselves
are handled as counterparts).
|
 |
| Author: | StormChaser | | Posted: | Feb 19, 2018 15:27 | | Subject: | Re: Inventory Change Request for Set 7750-1 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | 1) Is there any set in which 3062a and 3062b were simultaneously used?
|
I have no idea, but it's definitely possible. The Alternate section of the
inventory would cover cases where this occurred.
| | 2) There is a set from 1981 coming with 3062a, and a set from 1979 coming with
3062b! The early variant was used 2 years after its replacement was released!
Do you know any other part like this?
|
Yes, this does occur. Older variants can appear in sets for years after newer
variants are released. To see more detailed examples of timelines regarding
variants, please look through these parts:
https://www.bricklink.com/catalogRelCat.asp?relID=4
| | 3) The train 726 is from 726 but I didn't find it any catalog of 1977. It
surprises me this train was released only for one year. You may have more sources.
Could you check this please? (just to let you know that this train was sold in
Europe, except Great Britain)
|
Sorry, but I don't have any special sources. Brickset has a catalog library
which you might check.
| | 4) For this 7750, an inventory change request was submitted with photos to add
ONE
4073 Trans-Clear Plate, Round 1 x 1 Straight Side
as extra. After, I got photos of few other sealed/MISB 7750s. In one of them
there were Three
4073 Trans-Clear Plate, Round 1 x 1 Straight Side
extra. What would you do in this case?
|
It depends on what the set instructions show. Were any of the parts ever used
anywhere in the main or alternate models? Does the set box show an alternate
model in which one of the parts was used? What about the part count printed
on the box or in catalogs?
If the parts were never used anywhere and aren't part of the official part
count, then they're extras no matter how many there were. However, didn't
the parts come on sprues at this time? A count of 3 extras seems off if the
parts came in twos.
|
|
| Author: | elias3 | | Posted: | Feb 19, 2018 11:53 | | Subject: | Re: Inventory Change Request for Set 6067-1 | | Viewed: | 39 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SylvainLS writes:
| | In Inventories Requests, Thea writes:
You have a good memory 
But be reassured, I eventually decided against contacting elias3: I don’t need
to be tempted with envy 
|
|
|
| Author: | SimUmp | | Posted: | Feb 19, 2018 10:58 | | Subject: | Inventory Change Request for Set 40270-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4073 Reddish Brown Plate, Round 1 x 1 Straight Side (Extra)
|
| Author: | bb776200 | | Posted: | Feb 19, 2018 10:58 | | Subject: | Re: Inventory Change Request for Set 41058-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| | Thank you so much |
| Author: | Brick_Genie | | Posted: | Feb 19, 2018 09:26 | | Subject: | Inventory Change Request for Minifig poc012 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3626cpb0555 Light Flesh Minifig, Head Dual Sided PotC Jack Black Moustache Determined / Skull Face Pattern - Stud Recessed
Comments from Submitter:
Alternate part for the head. Both the Blocked Open Stud and Stud Recessed versions were released.
|
|
| Author: | TenHove | | Posted: | Feb 19, 2018 08:36 | | Subject: | Re: Languages | | Viewed: | 33 times | | Topic: | Suggestions | |
|
| Hello,
Your suggestion (SHIPTO-EQ: D) is a good start. I did n't think of that one.
Thank you. I hope BL will make a more appropriate TAG.
In Suggestions, Teup writes:
| | In Suggestions, TenHove writes:
| | Hello,
Although Bricklink is an America-based website, is serves a worldwide audiance
now.
My store is base in the Netherlands and I modified the emails from Bricklink
(like the invoice etc.). Now people get these bi-lingual. (Dutch and English)
The only way to make them uni-lingual again is by deleting the non-desired language-text.
It might be an idea to extend the 'List of E-Mail Conditional Block Macro
Tags' with a language-tag. When poeple prefer the text in Dutch, they can
get the Dutch-tekst, if the shop-owner provides it.
If this system is implemented, there should also be a default-tag for the text
that is to be used, if the desired language is not specified in the mail.
This will contribute to a better user-experiance.
As a web-developer, I realize that this is not easely implemented. But it might
be an idea to keep in mind for a next version of Bricklink.
With kind regards,
Carel ten Hove
Fricatho
|
What you need kind of already exists;
SHIPTO-EQ: D
returns true if the buyer is in the same country is you.
However, BL should just add a conditional macro tag that returns true if a buyer's
address appears in a specified list of countries, and another one that returns
false if it does. I bet this should take the BL team about 1 hour at most to
implement. It can be used for language, but also for other purposes - anything
for which location could be relevant. SHIPTO-EQ: D only tests 1 country, and
in our case for example we might like to generate a Dutch text for buyers from
Belgium too, for example.
We could then generate Dutch for SHIPTO-EQ:{The Netherlands,Belgium,Surinam,Aruba,
...} and English for SHIPTO-!EQ:{The Netherlands} so that in the case of Belgium
for example it generates both languages and you can leave it or delete one according
to which city you read in the buyer's address.
|
|
|
| Author: | WoutR | | Posted: | Feb 19, 2018 08:20 | | Subject: | Re: Inventory Change Request for Set 8719-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, WoutR writes:
| | Please make changes to the following inventory:
* Add 3 Part 54821 Pearl Light Gray Bionicle Zamor Sphere (Ball)
* Add 3 Part 54821 Pearl Dark Gray Bionicle Zamor Sphere (Ball)
* Add 3 Part 54821 Pearl Gold Bionicle Zamor Sphere (Ball)
* Add 1 Part 54821 Pearl Light Gray Bionicle Zamor Sphere (Ball) (Alternate) (match ID 1)
* Add 1 Part 54821 Pearl Dark Gray Bionicle Zamor Sphere (Ball) (Alternate) (match ID 1)
* Add 1 Part 54821 Pearl Gold Bionicle Zamor Sphere (Ball) (Alternate) (match ID 1)
* Change {10 to 1} Part (Not Applicable) 54821 Bionicle Zamor Sphere (Ball) {match ID 0 to 1}
Comments from Submitter:
The current inventory notes: "Color of spheres is random." Please update that note to: "The color of the 10th sphere is random."
http://www.bzpower.com/story.php?ID=2861
I found a 2006 set review that describes: " You just get an assortment of Gold, Silver, and Black spheres. There is three of each, with a random fourth sphere added in. "
This confirms what I see in all other online images of set 8719. The inventory is not completely random. The contents contains 10 spheres in pearl gold, pearl dark gray and pearl light gray. Each of the colors is available at least 3 times, and only the color of the 10th ball is random.
|
Cross-reference: https://www.bricklink.com/message.asp?ID=1077196
|
|
| Author: | fors | | Posted: | Feb 19, 2018 08:18 | | Subject: | Inventory Change Request for Set 8863-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3068bpb0637 Black Tile 2 x 2 with White Number 13 in Circle Pattern (Sticker) (Counterpart)
Comments from Submitter:
Instruction book 2, page 45
https://www.lego.com/biassets/bi/4599658.pdf
|
|
| Author: | WoutR | | Posted: | Feb 19, 2018 08:18 | | Subject: | Inventory Change Request for Set 8719-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 3 Part 54821 Pearl Light Gray Bionicle Zamor Sphere (Ball)
* Add 3 Part 54821 Pearl Dark Gray Bionicle Zamor Sphere (Ball)
* Add 3 Part 54821 Pearl Gold Bionicle Zamor Sphere (Ball)
* Add 1 Part 54821 Pearl Light Gray Bionicle Zamor Sphere (Ball) (Alternate) (match ID 1)
* Add 1 Part 54821 Pearl Dark Gray Bionicle Zamor Sphere (Ball) (Alternate) (match ID 1)
* Add 1 Part 54821 Pearl Gold Bionicle Zamor Sphere (Ball) (Alternate) (match ID 1)
* Change {10 to 1} Part (Not Applicable) 54821 Bionicle Zamor Sphere (Ball) {match ID 0 to 1}
Comments from Submitter:
http://www.bzpower.com/story.php?ID=2861
The current inventory notes: "Color of spheres is random." Please update that note to: "The color of the 10th sphere is random."
http://www.bzpower.com/story.php?ID=2861
I found a 2006 set review that describes: " You just get an assortment of Gold, Silver, and Black spheres. There is three of each, with a random fourth sphere added in. "
This confirms what I see in all other online images of set 8719. The inventory is not completely random. The contents contains 10 spheres in pearl gold, pearl dark gray and pearl
light gray. Each of the colors is available at least 3 times, and only the color of the 10th ball is random.
|
|
| Author: | SylvainLS | | Posted: | Feb 19, 2018 07:00 | | Subject: | Re: Inventory Change Request for Set 6067-1 | | Viewed: | 88 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Thea writes:
You have a good memory
But be reassured, I eventually decided against contacting elias3: I don’t need
to be tempted with envy
|
|
| Author: | SylvainLS | | Posted: | Feb 19, 2018 06:51 | | Subject: | Re: Inventory Change Request for Set 7750-1 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | […]
1) Is there any set in which 3062a and 3062b were simultaneously used?
|
I have no solid proof but according to my old parts and what sets they are coming
from, I’d say yes.
| | 2) There is a set from 1981 coming with 3062a, and a set from 1979 coming with
3062b! The early variant was used 2 years after its replacement was released!
Do you know any other part like this?
|
See discussion about 3794a/b/15573: https://www.bricklink.com/message.asp?ID=1075720
My Tower Bridge with seals 45S6 (hence from the 45th week of 2016) had Tan 3794a
mixed with 3794b (and all the other jumpers were 3794b).
|
|
| Author: | fors | | Posted: | Feb 19, 2018 06:02 | | Subject: | Re: Inventory Change Request for Set 8935-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Admin_Russell writes:
| | There are several reasons, but the main one is that Glow In Dark Opaque is a
specialty color, and as such, it's the most important color of the two. Now
these parts have a reasonable chance of being found via the color guide instead
of wallowing among 500 parts in Trans-Light Blue:
https://www.bricklink.com/catalogListOld.asp?catType=P&colorPart=15&v=3
And photographs don't tell the whole story. In the dark, the blue hues would
definitely take second place.
As for sellers and their choices, one of the things I noticed about the current
listings was a disagreement over the shade of blue. Because of the marbled nature
of the part, there is likely a significant range of color intensity. But like
I mentioned above, I don't think it's good for listings to be split.
If sellers want to give a refined description of the shade of blue in their notes,
that's fine. But to split up the listings means less chance that buyers will
find the part, especially when you consider that the PCC maps only to a single
color.
Russell
|
As a seller who has some of these pieces I agree.
The glow in dark nature of the piece is what defines it and since the blue is
marbled with glow in dark opaque it is definitely not trans light blue.
|
|
| Author: | bb53904 | | Posted: | Feb 19, 2018 04:23 | | Subject: | Re: Inventory Change Request for Set 6067-1 | | Viewed: | 39 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, elias3 writes:
| | In Inventories Requests, SylvainLS writes:
| | In Inventories Requests, elias3 writes:
| | […]
Comments from Submitter:
own collection
|
From all the change requests you make with that comment, we will soon know all
the sets in your collection
|
I will make a picture for you... contact me via the contactpage
|
I wouldn't give him any encouragement with this. You might end up with a
marriage proposal.
https://www.bricklink.com/message.asp?ID=988757
Thea
Always An Adventure!
|
|
| Author: | SezaR | | Posted: | Feb 19, 2018 03:28 | | Subject: | Re: Inventory Change Request for Set 7750-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| | | | I have photos of a MISB set 7740 (released 1980-84) in which the Round 1 x 1
are 3062b.
|
I thought you were offering the photo as proof that the set came with open stud
parts, because that's what the 3062b is.
|
My conclusion for 7740 was wrong. I tried to say that 3062b was first released
in 1981. Now, I know that this is wrong.
I am going to receive many more photos of 4.5 and 12v trains. Please hold on
this and other train-related requests. I come back to you hopefully soon.
I have few questions:
1) Is there any set in which 3062a and 3062b were simultaneously used?
2) There is a set from 1981 coming with 3062a, and a set from 1979 coming with
3062b! The early variant was used 2 years after its replacement was released!
Do you know any other part like this?
3) The train 726 is from 726 but I didn't find it any catalog of 1977. It
surprises me this train was released only for one year. You may have more sources.
Could you check this please? (just to let you know that this train was sold in
Europe, except Great Britain)
4) For this 7750, an inventory change request was submitted with photos to add
ONE
4073 Trans-Clear Plate, Round 1 x 1 Straight Side
as extra. After, I got photos of few other sealed/MISB 7750s. In one of them
there were Three
4073 Trans-Clear Plate, Round 1 x 1 Straight Side
extra. What would you do in this case?
|
|
| Author: | StormChaser | | Posted: | Feb 19, 2018 01:48 | | Subject: | Re: Inventory Change Request for Set 7750-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | Did you check the third photo I uploaded?
We can see the red 3062a.
|
I'm sorry, but to my eyes that 3rd photo is inconclusive for the red parts.
They could be either solid stud or open stud - it's impossible for me to
tell. The black parts, as you mention, are even worse.
When you said this:
| | I have photos of a MISB set 7740 (released 1980-84) in which the Round 1 x 1
are 3062b.
|
I thought you were offering the photo as proof that the set came with open stud
parts, because that's what the 3062b is.
|
|
| Author: | SezaR | | Posted: | Feb 19, 2018 01:33 | | Subject: | Re: Inventory Change Request for Set 7750-1 | | Viewed: | 16 times | | Topic: | Inventories Requests | |
|
| Did you check the third photo I uploaded?
We can see the red 3062a. If you are not sure the black ones are also 3062a,
please let me know so that I ask the owner of this set send me more photos. He
is currently very busy.
In Inventories Requests, StormChaser writes:
| | In Inventories Requests, SezaR writes:
| | The set 7750 released between 1980-82 came first with
Part 3062a Brick, Round 1 x 1 Solid Stud
|
Are you only going by the year of release or is there something more substantial
on which you're basing these requests?
|
|
|
| Author: | StormChaser | | Posted: | Feb 19, 2018 00:56 | | Subject: | Re: Inventory Change Request for Set 7750-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | The set 7750 released between 1980-82 came first with
Part 3062a Brick, Round 1 x 1 Solid Stud
|
Are you only going by the year of release or is there something more substantial
on which you're basing these requests?
|
|
| Author: | StormChaser | | Posted: | Feb 19, 2018 00:52 | | Subject: | Re: Inventory Change Request for Set 41058-1 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, mommyrides writes:
| | Please make changes to the following inventory:
* Add 1 Part 85984 Black Slope 30 1 x 2 x 2/3 (Counterpart)
* Add 1 Part 42511 Blue Minifig, Utensil Skateboard with Trolley Wheel Holders (Counterpart)
* Add 1 Part 3069 Bright Pink Tile 1 x 2 (undetermined type) (Counterpart)
Comments from Submitter:
I am new to this part and don't know if there will be an opportunity to submit pix in the next steps or if that is done separately. These three items are on the sticker sheets, but not listed in the counterparts.
|
Hi, there!
To add new stickered counterparts to a set you must first add the parts to the
catalogue. You can do that here (please read the instructions first):
https://www.bricklink.com/wantedCatalog.asp
Next, add pictures here:
https://www.bricklink.com/v2/catalog/catalogImageAdd.page
An inventory change request may be submitted to add the parts to the set inventory
once they've been added to the catalogue.
|
|
| Author: | bb776200 | | Posted: | Feb 18, 2018 23:02 | | Subject: | Inventory Change Request for Set 41058-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 85984 Black Slope 30 1 x 2 x 2/3 (Counterpart)
* Add 1 Part 42511 Blue Minifig, Utensil Skateboard with Trolley Wheel Holders (Counterpart)
* Add 1 Part 3069 Bright Pink Tile 1 x 2 (undetermined type) (Counterpart)
Comments from Submitter:
I am new to this part and don't know if there will be an opportunity to submit pix in the next steps or if that is done separately. These three items are on the sticker sheets, but not listed in the counterparts.
|
|
| Author: | randyf | | Posted: | Feb 18, 2018 18:28 | | Subject: | Inventory Change Request for Set 8397-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Reddish Brown {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Sealed set contents.
|
|
| Author: | renwall | | Posted: | Feb 18, 2018 13:25 | | Subject: | Inventory Change Request for Set 5847-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6196pb02 Dark Pink Container, Cupboard 4 x 4 x 4 Door with Blue Snowflake Pattern (Sticker) - Set 5848 (Counterpart)
* Change {1 to 2} Part White 2454pb008 Brick 1 x 2 x 5 with 'ICECREAM' and Ice Cream Cones and Popsicles Pattern (Sticker) - Set 5847 (Counterpart)
Comments from Submitter:
page 16 + page 19
|
|
| Author: | calsbricks | | Posted: | Feb 18, 2018 10:30 | | Subject: | Minor improvements to add inventory | | Viewed: | 76 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| I am sure there are lots of sellers who are waiting to see what enhancements
Bricklink as and when the finally release the sellers tools they hafve talked
about..
We would like to see a small modification done now to help on the 'add inventory
screens'. This would take a programmer less than an hour to accomplish and
it would aid most sellers.
When you manually add an item to your inventory you can do it in one of several
ways. When you go this route some things, which are important are missing.
From the main catalogue page for any given part choose Add to my inventory. This
takes you to the add inventory page and fills in some of the details for you
e.g. part no; colour etc, leaving you to add the quantity, price, condition and
any remarks you wish to make. You then click on the review item button at the
bottom and it takes you to the review item page where you do not see all the
relevant information No part no - no remarks. How can you really review the information
if it isn't all presented to review. Good memory? Maybe if you are only doing
the odd one, but if you are using this in anger it would be very helpful if the
review item page had the part no on it as well as the remarks field.
A similar situation occurs with the mass inventory upload. Once you paste your
xml file into the window you choose verify and all the parts in that file are
listed but instead of displaying the part nos for the items it drops them off
despite being in the xml upload.
Again a very minor programming job which would aid the sellers.
Think about it Bricklink. Make the site easier for us to use.
See images attached.
|
|
|
| Author: | elias3 | | Posted: | Feb 18, 2018 07:56 | | Subject: | Re: Inventory Change Request for Set 6067-1 | | Viewed: | 49 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SylvainLS writes:
| | In Inventories Requests, elias3 writes:
| | […]
Comments from Submitter:
own collection
|
From all the change requests you make with that comment, we will soon know all
the sets in your collection
|
I will make a picture for you... contact me via the contactpage
|
| Author: | SylvainLS | | Posted: | Feb 18, 2018 07:48 | | Subject: | Re: Inventory Change Request for Set 6067-1 | | Viewed: | 31 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, elias3 writes:
| | […]
Comments from Submitter:
own collection
|
From all the change requests you make with that comment, we will soon know all
the sets in your collection
|
| Author: | elias3 | | Posted: | Feb 18, 2018 07:43 | | Subject: | Inventory Change Request for Set 6067-1 | | Viewed: | 43 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Dark Gray {3847 Minifig, Weapon Sword, Shortsword to 3847a Minifig, Weapon Sword, Shortsword - early version in shiny smooth rigid ABS plastic}
Comments from Submitter:
own collection
|
|
| Author: | elias3 | | Posted: | Feb 18, 2018 07:34 | | Subject: | Inventory Change Request for Set 6085-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Black {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud / Hollow Stud}
* Change 3 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 7 Part Dark Gray {3847 Minifig, Weapon Sword, Shortsword to 3847a Minifig, Weapon Sword, Shortsword - early version in shiny smooth rigid ABS plastic}
Comments from Submitter:
own collection
|
|
| Author: | elias3 | | Posted: | Feb 18, 2018 07:31 | | Subject: | Inventory Change Request for Set 6054-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud / Hollow Stud}
* Change 1 Part Dark Gray {3847 Minifig, Weapon Sword, Shortsword to 3847a Minifig, Weapon Sword, Shortsword - early version in shiny smooth rigid ABS plastic}
Comments from Submitter:
check from own collection set
|
|
| Author: | wannes. | | Posted: | Feb 17, 2018 21:11 | | Subject: | Inventory Change Request for Set 118-1 | | Viewed: | 36 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part x466 White Electric, Wire 12V / 4.5V with two Leads, unspecified length
* Delete 4 Part 996ac01 Red Electric, Connector, 1 Way male Rounded with Hollow Pin (Banana Plug) (match ID 4)
* Add 1 Part 996ac15red White Electric, Wire 4.5V with four Red 1-prong connectors Hollow Pin, 15 Studs Long
Comments from Submitter:
this is more correct than unspecified length
|
|
| Author: | normann1974 | | Posted: | Feb 17, 2018 16:33 | | Subject: | Inventory Change Request for Set 7890-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 445 White Door 1 x 3 x 4 Left (Alternate) (match ID 2)
* Add 1 Part 446 White Door 1 x 3 x 4 Right (Alternate) (match ID 3)
* Change 1 Part White 58381 Door 1 x 3 x 4 Left - Open Between Top and Bottom Hinge {match ID 0 to 2}
* Change 1 Part White 58380 Door 1 x 3 x 4 Right - Open Between Top and Bottom Hinge {match ID 0 to 3}
Comments from Submitter:
Discussion here: https://www.bricklink.com/message.asp?ID=1077130
|
|
| Author: | Brixalotl | | Posted: | Feb 17, 2018 13:53 | | Subject: | Inventory Change Request for Set 60115-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 60115stk01b (Not Applicable) Sticker for Set 60115 - North American Version (24498/6133102) (Alternate) (match ID 1)
* Change 1 Part (Not Applicable) 60115stk01 Sticker for Set 60115 - (24490/6133090) {match ID 0 to 1}
Comments from Submitter:
adding alternate sticker, thanks
|
|
| Author: | Brixalotl | | Posted: | Feb 17, 2018 13:50 | | Subject: | Inventory Change Request for Set 70322-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 70322stk01b (Not Applicable) Sticker for Set 70322 - North American Version (25094/6137245) (Alternate) (match ID 1)
* Change 1 Part (Not Applicable) 70322stk01a Sticker for Set 70322 - International Version - (25093/6137240) {match ID 0 to 1}
Comments from Submitter:
adding alternate sticker, thanks
|
|
| Author: | Brixalotl | | Posted: | Feb 17, 2018 13:47 | | Subject: | Inventory Change Request for Set 60129-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 60129stk01b (Not Applicable) Sticker for Set 60129 - North American Version (24533/6133166) (Alternate) (match ID 1)
* Change 1 Part (Not Applicable) 60129stk01 Sticker for Set 60129 - (24528/133165) {match ID 0 to 1}
Comments from Submitter:
adding alternate sticker, thanks
|
|
| Author: | Brixalotl | | Posted: | Feb 17, 2018 13:44 | | Subject: | Inventory Change Request for Set 42054-1 | | Viewed: | 13 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 42054stk01b (Not Applicable) Sticker for Set 42054 - North American Version (32687/6182609) (Alternate) (match ID 1)
* Change 1 Part (Not Applicable) 42054stk01 Sticker for Set 42054 - (28214/6161280) {match ID 0 to 1}
Comments from Submitter:
adding alternate sticker, thanks
|
|
| Author: | WoutR | | Posted: | Feb 17, 2018 10:37 | | Subject: | Re: Inventory Change Request for Set 70102-1 | | Viewed: | 30 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, maggiec writes:
| | In Inventories Requests, WoutR writes:
| | In Inventories Requests, WoutR writes:
| | In Inventories Requests, Brixalotl writes:
| | In Inventories Requests, StormChaser writes:
| | In Inventories Requests, Brixalotl writes:
| | Please make changes to the following inventory:
* Add 1 Part 54821 Trans-Dark Blue Bionicle Zamor Sphere (Ball) (Alternate) (match ID 2)
* Change 1 Part Trans-Medium Blue 54821 Bionicle Zamor Sphere (Ball) {match ID 0 to 2}
Comments from Submitter:
found both color variants during part out. Thanks
|
Would you mind posting a side-by-side comparison photo of the two different color
variants you found?
Thanks in advance.
|
Sure, Thanks again
|
As far as I know many Zamor spheres are actually multicolored. The mix causes
the different appearance. I think that there are at least four "shades" of all
the transparent-multicolor spheres.
There is a catalog note on these parts, but the color causes much confusion.
We might need additional catalog images for all of them, showing the variation.
|
A quick image - probably not the complete range that can be found.
|
We've gone ahead and added it to the additional images for
Please let us know if you prefer we didn't use it, otherwise, thanks!
Maggie
|
That is OK. I will try to make a better photo later.
|
|
| Author: | normann1974 | | Posted: | Feb 17, 2018 06:32 | | Subject: | Re: Inventory Change Request for Gear 3844 | | Viewed: | 14 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, normann1974 writes:
| | Please make changes to the following inventory: [G=3844]
* Change 2 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
My three sets all have this variant.
|
Also, could someone please explain to me the meaning of the "Brick, Round 2 x
2 Dome Top" in the inventory of this set? The regular is "undetermined" type,
while the alternate is a specific variant. All me my three sets use [Part=553b]
(the type used in the alternate).
/Jan
|
|
| Author: | normann1974 | | Posted: | Feb 17, 2018 06:30 | | Subject: | Inventory Change Request for Gear 3844 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory: [G=3844]
* Change 2 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
My three sets all have this variant.
|
|
| Author: | elias3 | | Posted: | Feb 17, 2018 05:54 | | Subject: | Inventory Change Request for Set 4418-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
own collection
|
|
| Author: | elias3 | | Posted: | Feb 17, 2018 05:53 | | Subject: | Inventory Change Request for Set 4417-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Blue {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 3 Part Yellow {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
own collection
|
|
| Author: | elias3 | | Posted: | Feb 17, 2018 05:53 | | Subject: | Inventory Change Request for Set 4413-1 | | Viewed: | 13 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
own collection
|
|
| Author: | elias3 | | Posted: | Feb 17, 2018 05:52 | | Subject: | Inventory Change Request for Set 4346-3 | | Viewed: | 11 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
own collection
|
|
| Author: | elias3 | | Posted: | Feb 17, 2018 05:52 | | Subject: | Inventory Change Request for Set 4346-2 | | Viewed: | 11 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
own collection
|
|
| Author: | elias3 | | Posted: | Feb 17, 2018 05:51 | | Subject: | Inventory Change Request for Set 4346-1 | | Viewed: | 10 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
own collection
|
|
| Author: | elias3 | | Posted: | Feb 17, 2018 05:50 | | Subject: | Inventory Change Request for Set 4335-1 | | Viewed: | 13 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Light Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
own collection
|
|
| Author: | imanarchy | | Posted: | Feb 16, 2018 22:27 | | Subject: | Inventory Change Request for Set 3829-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {4460 Slope 75 2 x 1 x 3 - Undetermined Stud Type to 4460a Slope 75 2 x 1 x 3 - Completely Open Stud}
Comments from Submitter:
Part 4460 is undetermined stud type that is marked for deletion. The correct part is 4460a, open stud.
|
|
| Author: | maggiec | | Posted: | Feb 16, 2018 21:44 | | Subject: | Re: Inventory Change Request for Set 70102-1 | | Viewed: | 42 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, WoutR writes:
| | In Inventories Requests, WoutR writes:
| | In Inventories Requests, Brixalotl writes:
| | In Inventories Requests, StormChaser writes:
| | In Inventories Requests, Brixalotl writes:
| | Please make changes to the following inventory:
* Add 1 Part 54821 Trans-Dark Blue Bionicle Zamor Sphere (Ball) (Alternate) (match ID 2)
* Change 1 Part Trans-Medium Blue 54821 Bionicle Zamor Sphere (Ball) {match ID 0 to 2}
Comments from Submitter:
found both color variants during part out. Thanks
|
Would you mind posting a side-by-side comparison photo of the two different color
variants you found?
Thanks in advance.
|
Sure, Thanks again
|
As far as I know many Zamor spheres are actually multicolored. The mix causes
the different appearance. I think that there are at least four "shades" of all
the transparent-multicolor spheres.
There is a catalog note on these parts, but the color causes much confusion.
We might need additional catalog images for all of them, showing the variation.
|
A quick image - probably not the complete range that can be found.
|
We've gone ahead and added it to the additional images for
Please let us know if you prefer we didn't use it, otherwise, thanks!
Maggie
|
|
| Author: | randyf | | Posted: | Feb 16, 2018 18:40 | | Subject: | Re: Inventory Change Request for Set 70102-1 | | Viewed: | 36 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, WoutR writes:
| | A quick image - probably not the complete range that can be found.
|
Very nice image! I am going to save a copy of that if you don't mind.
I think this image would be a great place to start to standardize the colors
in the catalog that these spheres come in and what colors they should be listed
under.
Cheers,
Randy
|
|
| Author: | SezaR | | Posted: | Feb 16, 2018 17:07 | | Subject: | Re: Inventory Change Request for Set 952-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
|
| | | I sincerely hope that you were able to forgive your brother for losing 1 part
yellow 3062a. There are some things in life which are more important than toys
and your relationship with your brother is one of those things. I'm fairly
sure he didn't lose this part on purpose.
|
I could easily let that one go, so did I for him losing a white 1*2 tile, but
how could I forgive him for having swallowed one "yellow Plate, Modified 1 x
2 with 1 Stud" 3794? Our beautiful Hairdressing Salon 230 set missed this part
and the flower could never stand properly on the table in the hairdressing salon?
That one was not forgivable.
He was (and is!) 8 years older than me and all these brutalities happened before
my birth.
We shared a room until I was 8 years old, so how I learnt about Lego. The most
practical and useful parts we had were (about) 8 red Hinge Plate 2 x 5 (3149c01)
and red Hinge Plate 2 x 9 (3324c01). When I was 4 or 5, I realized their functionality
and that i could open them. Then I also discovered that if you keep opening them,
at some point they don't want to open further so I needed to apply some force...and
I truly liked that sound of crack! Naturaly I tried this trick with the second
hinge, then the third one...
I still remember the face of my brother when he discovered what happened! He
then immediately searched through all parts and rescued the last two hinge plates
(one 2 x 5 and one 2 x 9). This might be the reason they(my brothers) didn't
give me their precious until I was 9 years old: the iconic Motorcycle 857 
|
|
| Author: | elias3 | | Posted: | Feb 16, 2018 16:01 | | Subject: | Inventory Change Request for Set 7952-9 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Pearl Gold {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 1 Part Pearl Gold {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Extra)
Comments from Submitter:
own set, stockroom and inv. check
|
|
| Author: | elias3 | | Posted: | Feb 16, 2018 16:00 | | Subject: | Inventory Change Request for Set 7952-3 | | Viewed: | 12 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Reddish Brown {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
own set, stockroom and inv. check
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
USA, Oklahoma
Belgium, Oost-Vlaanderen
Netherlands, Flevoland
Sweden, Västra Götaland
France, Nouvelle-Aquitaine
Canada, British Columbia
United Kingdom, England
)
)
)
Denmark
