Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | SezaR  | | Posted: | Jul 9, 2021 20:02 | | Subject: | Re: Inventory Change Request for Set 165-1 | | Viewed: | 26 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Admin_Russell writes:
| | In Inventories Requests, SezaR writes:
| | In Inventories Requests, Admin_Russell writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Add 1 Minifig pln150 Plain Blue Torso with Blue Arms, Red Legs, Black Hat
* Change {9 to 7} Part Red 3005 Brick 1 x 1
Comments from Submitter:
The minifig can be seen on the back of the box.
Seven Red Bricks 1 x 1 can be seen on the following steps:
Two - step 4
One - step 6
Two - step 7
Two - step 10
Total=7
|
In Step 7 there are 4 (2 are at the very far right).
The minifigure with the red legs is simply a prototype that was replaced by the
one with a red torso in production.
|
The 3rd minifigure appears on the box art, and on the images of the set on the
instructions and the catalogs. The instructions only shows how to build one minifg
and consider that enough for the kid to find out how to build other minifig(s).
How do you know the third minifig was just a prototype?
|
Are there ever three minifigures shown together in one image? This was the very
first year of the minifigure so the standard of showing each minifigure built
in the instructions wasn't fully developed yet.
|
no but both of these requests are correct with evidence.
There are only 7 red 1x1 bricks.
I will write more about this later.
|
 |
| Author: | SezaR | | Posted: | Jul 9, 2021 19:36 | | Subject: | Re: Inventory Change Request for Set 165-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Admin_Russell writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Add 1 Minifig pln150 Plain Blue Torso with Blue Arms, Red Legs, Black Hat
* Change {9 to 7} Part Red 3005 Brick 1 x 1
Comments from Submitter:
The minifig can be seen on the back of the box.
Seven Red Bricks 1 x 1 can be seen on the following steps:
Two - step 4
One - step 6
Two - step 7
Two - step 10
Total=7
|
In Step 7 there are 4 (2 are at the very far right).
The minifigure with the red legs is simply a prototype that was replaced by the
one with a red torso in production.
|
The 3rd minifigure appears on the box art, and on the images of the set on the
instructions and the catalogs. The instructions only shows how to build one minifg
and consider that enough for the kid to find out how to build other minifig(s).
How do you know the third minifig was just a prototype?
|
|
| Author: | SezaR | | Posted: | Jul 8, 2021 14:06 | | Subject: | Re: Inventory Change Request for Set 165-1 | | Viewed: | 31 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Admin_Russell writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Add 1 Minifig pln150 Plain Blue Torso with Blue Arms, Red Legs, Black Hat
* Change {9 to 7} Part Red 3005 Brick 1 x 1
Comments from Submitter:
The minifig can be seen on the back of the box.
Seven Red Bricks 1 x 1 can be seen on the following steps:
Two - step 4
One - step 6
Two - step 7
Two - step 10
Total=7
|
In Step 7 there are 4 (2 are at the very far right).
|
step 7
http://www.peeron.com/scans/165-1/8/
I only see two 1x1 red bricks.
In the photo attached:
The black circles: four 6x1 red bricks.
The blue circles: two 2x1 red bricks.
The green circles: two 1x1 red bricks.
| | The minifigure with the red legs is simply a prototype that was replaced by the
one with a red torso in production.
|
It did come with this set.
|
|
|
| Author: | SezaR | | Posted: | Jul 3, 2021 05:23 | | Subject: | Inventory Change Request for Set 6274-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
Comments from Submitter:
Have two complete copies of this set in very good condition with box and instructions and everything. I got the Canadian one from the first owner. The spare sprues for trans-yellow 4073c01 are still in the boxes!
The catalog of my American's one is from 1991.
|
|
| Author: | SezaR | | Posted: | Jul 3, 2021 03:30 | | Subject: | Re: Add note for 367a | | Viewed: | 31 times | | Topic: | Catalog Requests | |
|
| In Catalog Requests, hpoort writes:
| | In Catalog Requests, SezaR writes:
| |
Some of these baseplates were originally cut from larger baseplates by the Lego
company. This left two sides rough and white from the cut and two sides smooth
and grey from the original baseplate.
|
I believe it was not 'some' but 'all'. Aren't these baseplates
vacuum formed from rolls of material?
|
I own both types.
|
|
| Author: | SezaR | | Posted: | Jul 3, 2021 02:23 | | Subject: | Add note for 367a | | Viewed: | 61 times | | Topic: | Catalog Requests | | For: | Catalog Associate | | Status: | Completed | |
|
|
Some of these baseplates were originally cut from larger baseplates by the Lego
company. This left two sides rough and white from the cut and two sides smooth
and grey from the original baseplate.
|
|
| Author: | SezaR | | Posted: | Jul 2, 2021 20:25 | | Subject: | Re: Inventory Change Request for Set 080-1 | | Viewed: | 27 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Add 1 Part 3020 Trans-Clear Plate 2 x 4
* Change {3 to 2} Part Yellow 3006 Brick 2 x 10
Comments from Submitter:
1) at inventory there are 3 Yellow 2x10 listed, I can only find use for 2 .(the third one on the train are indeed three 2x4 Yellow bricks!)
2) For the black truck there are also a 2x4 plate above the transclear 1x4, also missing in inventory
https://www.bricklink.com/message.asp?ID=1239757
|
For now, please do not process any inventory change request 080-1 and 080-2.
More evidence is surfaced and it is better I first go through them and double
check everything.
|
|
| Author: | SezaR | | Posted: | Jun 30, 2021 17:17 | | Subject: | Re: Inventory Change Request for Set 6950-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, the_legoqueen writes:
| | Please make changes to the following inventory:
* Change 8 Part Black {3749 Technic, Axle 1 with Pin without Friction Ridges Lengthwise to 43093 Technic, Axle 1 with Pin with Friction Ridges Lengthwise} {match ID 0 to 150957}
Comments from Submitter:
Instruction booklet clearly has axle with friction ridges which fit into the wheels for this set
|
The part
was first designed and released in 2001-2002 but the set
is from 1982, 20 years before this part was released!
|
|
| Author: | SezaR | | Posted: | Jun 22, 2021 16:37 | | Subject: | Re: Inventory Change Request for Set 127-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, pamoge writes:
| | Please make changes to the following inventory:
* Add 8 Part wheel1a Red Train Wheel with 2 x 2 Stud Center, Traction Teeth
Comments from Submitter:
It's quite confussing. Train appears on box pictures with spoked wheels only. Nevertheless, following builing instructions it should be 2x2 stud center wheels for the passanger train carriage as well as for postal services train carriage. The locomotive should have spoked wheels (with rims) and the battery holder spoked wheels. This is also the devirence with set 116. All train cars in the 116-set have 2x2 stud center wheels. Therefore, these sets are not similar.
Thus, wheel1a should be added to the 127-set inventory list (8 pieces) and wheel2b should be changed from 16 to 4 pieces for this inventory list. To my opinion, the statement that sets 116 and 127 are similar (but with different numbers should be deleted.
|
See
https://www.bricklink.com/messageThread.asp?ID=253906
The wheels
were not used/produced since 1969. See
https://www.bricklink.com/catalogItemIn.asp?P=wheel1a&in=S
The box art and the instructions were designed about the transition time from
to
so TLG did not bother to correct them just before the producing and releasing
them for sale.
For some trains released in that time, there were two versions of instructions.
For exmaple train
were in the market for many years (1968-1971?) and many parts were changed, specially
the black 4.5v motor so TLG bothered to change the instructions. See
https://www.bricklink.com/message.asp?ID=1252652
The funny thing is the image on the last page of the second version. The wheels
are first version (incorrectly)
but the instructions shows
|
|
| Author: | SezaR | | Posted: | Jun 22, 2021 06:02 | | Subject: | Re: New Complete or Used | | Viewed: | 31 times | | Topic: | Help | |
|
| In Help, gogogovro writes:
| | How would you list this set: New, Complete or Used?
I bought a set from another marketplace, it was complete with three bags, instructions,
stickers and box. Bag one was opened and the minidolls built (friends set) and
a few pieces put together, but mostly all apart in mint condition. Bags 2 and
3 are still sealed. Sticker sheet and instructions are in new condition. I verified
bag one is complete with instructions. So 3/4ths of the set is new and the other
I would normally classify as used.
|
used complete
https://store.bricklink.com/SezaR?itemID=236757360#/shop?o={%22invID%22:%22236757360%22}
http://img.bricklink.com/myImg/634673.jpg
|
|
| Author: | SezaR | | Posted: | Jun 22, 2021 03:41 | | Subject: | Re: We have a new Inventories Admin! | | Viewed: | 30 times | | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| | Dear BrickLink members,
We are very pleased to announce that we are adding member Maggiec to the Community
Expert Program. She is being appointed as a BrickLink Inventories Administrator
and will be serving alongside current Inventories Admins Paulvdb and Turez.
|
Congradz Maggie!
| | For most of you, Maggie needs no introduction. She is a long-time member of the
site, and has served as a Catalog Administrator for 14 years. She has worked
with several well-known catalog administrators including Firefly and Therobo,
and also Dan Jezek himself.
https://www.bricklink.com/memberAdmins.asp
Most people will associate Maggie with the "catalog" side of the Catalog, but
she has also been active as a contributor on the "inventories" side over the
years as well. In fact, she logged the very first inventory change requests back
in June 2004:
https://www.bricklink.com/catalogInvChangeItem.asp?itemType=S&itemNo=4535-1&viewDate=Y&viewStatus=1
Maggie has been a stabilizing force during some very critical times for the BrickLink
site. And we are very pleased she is joining us now for this next journey, and
we feel she will be an excellent addition to our Catalog team.
Please join me in welcoming her! 
|
|
|
| Author: | SezaR | | Posted: | Jun 17, 2021 22:50 | | Subject: | Re: Samsonite Lego Question | | Viewed: | 71 times | | Topic: | General | |
|
| In General, axmpxl writes:
| | I have a Canadian Samsonite set that is sealed in cellophane. However it also
has box seals at both ends of the set. European sets wrapped in cellophane do
not have seals. Is this normal for Samsonite sets or is this odd? I've
attached a picture. There clearly are seals under the cellophane. Any help
clarifying this would be much appreciated.
|
E!!! item number:393219386763
Based on the other photos, this is not produced by Samsonite of Canada because:
- no French text such as "Jeu de construction" is printed on the box,
- Instead of "77 pieces", there is " 77 Interlocking pieces" printed,
- "Stratford, Ont. Canada" is not printed on the side of the box,
The Canadian boxes never had seals on the sides of the box. Small boxes were
not sealed, and for the bigger boxes, only the inner tray were wrapped with cellophane.
Attached are photos of Canadian boxed set
|
|
|
| Author: | SezaR | | Posted: | Jun 17, 2021 22:34 | | Subject: | Inventory Change Request for Set 7819-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part BA274pb01L Red Stickered Assembly 3 x 2 x 2 with Mail Envelope Pattern Model Left Side (Sticker) - Set 7819 - 2 Brick 1 x 2, 1 Brick 1 x 3 (Counterpart)
* Add 1 Part BA274pb01R Red Stickered Assembly 3 x 2 x 2 with Mail Envelope Pattern Model Right Side (Sticker) - Set 7819 - 2 Brick 1 x 2, 1 Brick 1 x 3 (Counterpart)
|
|
| Author: | SezaR | | Posted: | Jun 17, 2021 22:33 | | Subject: | Inventory Change Request for Set 7750-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part BA275pb01 Black Stickered Assembly 4 x 2 x 2 1/3 with '7750' Pattern (Sticker) - Set 7750 - 2 Slope, Inverted 45 2 x 2, 1 Plate 2 x 4, 1 Technic, Brick 1 x 2 with Hole (Counterpart)
|
|
| Author: | SezaR | | Posted: | Jun 17, 2021 22:32 | | Subject: | Inventory Change Request for Set 7710-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part BA275pb02 Black Stickered Assembly 4 x 2 x 2 1/3 with '7710' Pattern (Sticker) - Set 7710 - 2 Slope, Inverted 45 2 x 2, 1 Plate 2 x 4, 1 Technic, Brick 1 x 2 with Hole (Counterpart)
|
|
| Author: | SezaR | | Posted: | Jun 16, 2021 19:44 | | Subject: | Re: Please add "i no longer want this order" | | Viewed: | 79 times | | Topic: | Feedback | |
|
| In Feedback, Deedesria writes:
| | In Feedback, Deedesria writes:
| | Theres no good way to communicate why i want to cancel my orders sometimes. I
often end up with not enough money, or almost impulse buying sets and changing
my mind. Please add an option that says "I no longer want this order" or something
along those lines
|
I now realize my mistake. I promise I don't do this to be a jerk.
|
I removed you from my stoplist. You are welcome to order from me just make sure
before you place an order
| | Sorry for being an idiot
|
I don't think you need to say thid.
|
|
| Author: | SezaR | | Posted: | Jun 16, 2021 02:15 | | Subject: | Re: Please add "i no longer want this order" | | Viewed: | 73 times | | Topic: | Feedback | |
|
| In Feedback, Teup writes:
| | Very strange reply, you first state that it's different in your place and
then you don't produce the evidence. Smells like bluf.
Anyway, if you're right, you would still need to respect the rights of your
US or EU customers. Therefore, the cancellation reason the OP suggested is still
a relevant and valid request, and stoplisting them for requesting it seems petty
to me.
|
I don't know if there are rules for international sales. But here, things
look to me simple:
- The buyer orders and then wants to cancel. Ok. BL allows this but the seller
can complete an NPD agianst the buyer.
By now, some sellers see the feedback of buyer and add him to their stoplist.
This is LEGAL and their RIGHT!
- The buyer orders again.... second NPB.
More seller spot the feedback record of buyer and he/she is added to more stoplists.
- The buyer orders again.... the third and last NPB.
Now BL revoke his buying priviledge forever. BL has RIGHT to refuse giving service
to this individual.
| |
(Also, I would not want to discriminate buyers based on their country of residence
in terms of the level of service they're getting, but that is a personal
choice)
In Feedback, Bricklord writes:
| | You tell us. You seem to be the expert on how the world works outside your borders.
In Feedback, Teup writes:
| | So what's the law in Canada?
In Feedback, Bricklord writes:
| | You would do well to remember that your cited 'legal rights' apply only
to your country. This is a world wide platform for selling. What applies in your
country does not necessarily apply elsewhere. Know your arcs.
In Feedback, Teup writes:
| | Hard to believe you seem to have such an extensive amount of experience on BL
yet fail to let people use their legal rights as consumers.
In Feedback, Bricklord writes:
| | you just got yourself stoplisted in yet another store. I will thank you however
for at least warning me before I waste my time on you.
In Feedback, Deedesria writes:
| | Theres no good way to communicate why i want to cancel my orders sometimes. I
often end up with not enough money, or almost impulse buying sets and changing
my mind. Please add an option that says "I no longer want this order" or something
along those lines
|
|
|
|
|
|
|
|
|
| Author: | SezaR | | Posted: | Jun 13, 2021 13:37 | | Subject: | Re: Inventory Change Request for Set 723-1 | | Viewed: | 26 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 4 Part wheel2a Red Train Wheel Spoked for Motor
* Delete 4 Part trainrim Black Train Rim for 4.5V & 12V Locomotive Wheels
* Add 1 Part 2913c02 Blue Electric, Train Track Contact Base with Wire (97 cm) and Connector with Cap
* Change 4 Part Red wheel2ac01 Train Wheel Spoked for Motor with Black Train Rim for 4.5V & 12V Locomotive Wheels (wheel2a / trainrim) {Counterpart to Regular}
|
|
|
|
| Author: | SezaR | | Posted: | Jun 13, 2021 05:10 | | Subject: | Inventory Change Request for Set 723-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 4 Part wheel2a Red Train Wheel Spoked for Motor
* Delete 4 Part trainrim Black Train Rim for 4.5V & 12V Locomotive Wheels
* Add 1 Part 2913c02 Blue Electric, Train Track Contact Base with Wire (97 cm) and Connector with Cap
* Change 4 Part Red wheel2ac01 Train Wheel Spoked for Motor with Black Train Rim for 4.5V & 12V Locomotive Wheels (wheel2a / trainrim) {Counterpart to Regular}
|
|
| Author: | SezaR | | Posted: | Jun 12, 2021 21:27 | | Subject: | Re: How do you pack your items? | | Viewed: | 33 times | | Topic: | Selling | |
|
| In Selling, Grego writes:
| | In Selling, Nubs_Select writes:
| | Hi!
https://prd11.wsl.canadapost.ca/cpc/en/personal/sending/letters-mail/postage-rates.page
It shows the oversized lettermail as a current option for shipping to USA
Its description says
Items such as large documents, oversize envelopes and heavy cards. Emphasis on
oversized envelopes. ive dropped lettemail like this off at the post office directly
in the past they weighed it measured it and accepted it without a problem and
ive used that method hundreds of times and ive never had one returned from canada
post. For USA I just put 3 P stamps on if its under 100 Grams and ship it that
way and it arrive in less than 4 weeks usually.
-Jason
|
Well you and your buyers have been lucky. You've saved yourselves a few cents
at the risk of having it returned or destroyed. Just because you haven't
had a problem yet doesn't mean that what you are doing is the best way of
doing it.
|
I have seen two big other Canadian stores ship that way but seems those sent
to Germany may get returned.
| |
Not even sure it's ethical or strictly legal either.
|
What I don't understand is why the prices of CanadaPost depends on the content
(as far as the size is correct and there is no insurance)?!
|
|
| Author: | SezaR | | Posted: | Jun 11, 2021 14:45 | | Subject: | Re: Inventory Change Request for Set 6848-2 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 2 Part 4345 Light Gray Container, Box 2 x 2 x 2
* Add 2 Part 4345a Light Gray Container, Box 2 x 2 x 2 - Solid Studs
* Delete 2 Part 4073 Trans-Green Plate, Round 1 x 1
* Add 1 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Delete 2 Part 4073 Trans-Red Plate, Round 1 x 1
* Add 1 Part 4073c01 Trans-Green Plate, Round 1 x 1, 2 on Sprue
|
The instructions shows the sold stud containers and this set was released in
1985, about 6-7 years before the hollow stud version of container was released.
Is it time to add sprues without any evidence? Hard to find any evidence for
certain small sets like this one.
|
|
|
| Author: | SezaR | | Posted: | Jun 11, 2021 14:43 | | Subject: | Inventory Change Request for Set 6848-2 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 4345 Light Gray Container, Box 2 x 2 x 2
* Add 2 Part 4345a Light Gray Container, Box 2 x 2 x 2 - Solid Studs
* Delete 2 Part 4073 Trans-Green Plate, Round 1 x 1
* Add 1 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Delete 2 Part 4073 Trans-Red Plate, Round 1 x 1
* Add 1 Part 4073c01 Trans-Green Plate, Round 1 x 1, 2 on Sprue
|
|
| Author: | SezaR | | Posted: | Jun 8, 2021 15:34 | | Subject: | Re: Shipments without tracking number | | Viewed: | 37 times | | Topic: | Selling | |
|
| In Selling, BrickPhaisan writes:
| | Good morning, as the title says, problems with ordinary shipping without tracking.
I have already had some dislike with this method and I am considering removing
it, maybe I will lose sales, but surely I will also avoid taking a negative point
without any fault, because you do not know if the client has the package and
wants the money to be returned ( the old paypal trick) or that the postal agency
has lost the package.
What would you do or do about it?
Greetings and take good care of yourselves.
|
I would:
- Below a certain value (like 30 Euro), accept to ship without tracking
- For shipment without tracking, Add a small handling fee (for self-insurance)
like 1%
- Refund if the buyer claims he did not receive it.
In Canada, we can ship a mailer for only $2.05 without tracking but with tracking,
it costs $11. So far, none of my buyers claimed a non-delivery.
I have had three parcels lost, two of them had tracking and the tracking of one
parcel said "delivered"! (I trust that buyer and the parcel was delivered to
a wrong address)
|
|
| Author: | SezaR | | Posted: | Jun 6, 2021 03:23 | | Subject: | Re: Inventory Change Request for Set 7818-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, normann1974 writes:
| | Please make changes to the following inventory:
* Add 2 Part BA266pb03 Blue Stickered Assembly 11 x 1 x 2 with 'DSB' and 'Basel Hamburg' Pattern (Stickers) - Set 7818 - 1 Brick 1 x 3, 1 Brick 1 x 4, 1 Brick 1 x 6, 1 Brick 1 x 8 (Counterpart)
|
4 stickers for cities
12 stickers for railways
Total: 48 combinations
Only 45 more stickered assemblies are left to be added to the 7818's inventory!
|
|
| Author: | SezaR | | Posted: | Jun 4, 2021 21:44 | | Subject: | Re: Legit order? Scam? | | Viewed: | 65 times | | Topic: | Help | |
|
| His requests is legit. I would do that.
At the end of the day, he is buying one type of toy: Lego
In Help, 3ofmomlego writes:
| | Hi
I received this email via my personal account. I’m not sure if the buyer didn’t
understand to use the BL email. I’m not sure if I’m comfortable with this request.
Should I just cancel the order?
Here it is:
“I wanted to request a favor regarding this purchase. It is being sent to a suite
that manages and consolidates packages prior to international shipping.
Normally no action is necessary, however I've recently found out that my
country passed a stupid import rule that only 10 toys can be imported per person/year.
Given the price and the fact that they're all minifigs it should be a problem,
but if the customs agent considers each individual minifig as a separate "toy",
I will not be able to receive my minifigs.
Is it possible to include an invoice that instead of detailing each individual
minifig, just comes sealed as a "Minifigure Set" so that the whole "set" is counted
as ONE toy and not all the individual ones I've purchased.
You don't need to change the total value or any of that, just packaging them
as a single set would be a great help.
Thank you so much in advance.”
Any advice is appreciated, Pam
I Got a Meatball store.
|
|
|
| Author: | SezaR | | Posted: | Jun 3, 2021 23:56 | | Subject: | Re: Different box than what Bricklink has posted | | Viewed: | 47 times | | Topic: | General | |
|
| In General, Pine06 writes:
| | Hi everyone,
I'm going through my old lego boxes that I kept from when I was a kid. Set
6044 kings carriage. My box that I have is different than what Bricklink shows.
Box that I have has piece count(120) printed and royal knights shield with lion
head printed next to the set number right upper corner. Any insight or comments
much appreciated. Thank you
|
See all variations of box
(from 1984)
https://imgur.com/gallery/GDecthb
and those of
(from 1985)
https://imgur.com/gallery/9TcHo4k
and those of
(from 1985)
https://imgur.com/gallery/tTmQ6SS
|
|
| Author: | SezaR | | Posted: | Jun 3, 2021 19:19 | | Subject: | Re: This is a test! | | Viewed: | 58 times | | Topic: | Catalog Requests | |
|
| In Catalog Requests, viejos writes:
A test from a semi-duplicate acoount.
|
| Author: | SezaR | | Posted: | Jun 3, 2021 17:43 | | Subject: | Re: Is this a legit 3942a 2 x 2 x 2 cone? | | Viewed: | 40 times | | Topic: | Catalog Identification | |
|
| In Catalog Identification, aboyer writes:
| | The one in the bottom-center arrived today. Shown for comparison with 3 others
that clearly have the logo. For modern Legos I would reject it out of hand, but
I have no idea if things were different in the 70s-80s.
Is this a legit Lego?
Thank you!
|
how does inside it look like?
Look inside.
Do you see any number moulded? (like 1, 3 whatever)
Maybe it is drilled, melted,... but is original.
|
|
| Author: | SezaR | | Posted: | Jun 1, 2021 21:12 | | Subject: | Inventory Change Request for Set 7727-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part trainrim Light Gray Train Rim for 4.5V & 12V Locomotive Wheels (Extra)
Comments from Submitter:
Source: my own new copy (box opened)
I trust it. All 12v sets in 80s came with extra trainrim(s).
|
|
| Author: | SezaR | | Posted: | May 29, 2021 19:39 | | Subject: | Re: 3940a vs 3940b 3 times ordered frustrating | | Viewed: | 65 times | | Topic: | Problem Order | |
|
| In Problem Order, LegoChewy writes:
| | Ok brief history. I am still a green horn when it comes to Bricklink orders.
I have ordered three times and asked on two different occasions for a 2x2x2 3940a.
What I get delivered is a 3940b. Will the part work sure but they are not period
correct. I have done maybe a dozen or so orders on Bricklink and 3 have
been filled with errors. One has not shipped till 9 days after although the
shipping label has been created on the 8th day. Is anyone else have luck like
this? I am sorry for complaining but tired of oh we will just refund your part.
Too bad your out the shipping and thanks for buying my other items and p*** off.
Really looking for constructive advice. I have not left negative feedback but
damn I am not made of money. Was hoping I found a better place than Ebay.
|
Naturally you should expect to receive the part that you ordered, however this
is my advice as buyer on BL and as seller:
- There are ways too many variants on BL. Most sellers are not aware of the majority
of variations. I persoanlly have contributed a lot to the catalog and made many
changes. I know most variations of vintage parts but NOT all of them. Even when
I know variations, I forget or I do not have time to check variations of the
parts buyer have ordered from me, specially since most buyers do not
care about variations. SOo when I order from other sellers, I write a note
like this:
Please double check that the parts I ordered are 3940a and they are not 3940b.
Please check and compare their photos. If they are not 3940a, please cancel the
order (or remove those parts from my order).
This is the message I sent to a seller on Bricklink:
ould you please tell me if your white windows 27c01
are with glass not fixed. Because some people confuse it with 27ac01 whose glass
is fixed.
Seller's answer: Sorry for late answer! You're welcome to ask - when
I had closer look at the 7 windows, only 4 were left, which are really 27c01.
One was 27b and two 27. Now I still learn about those windows .
**********
I should also note what I know about this part. The second variation
was first produced in 1984. However, depending on the location of the Lego manufacture
and the color, different sets produced or released between 1984-86 (or 1987..)
came with
or
For example, maybe TLG ran out of gray 3940a in 1984 so those sets coming with
3940a in 1984 came with 3940a (this includes those sets released in 1982 or 1983
or 1981....) who were still produced and in market in 1984 and later.
But maybe the black
was still in the stock of TLG so they kept using them to the end or 1986 or 1987
until they ran out of them and then, they produced and used black since 1987
(or 1988)
All of this to say that DO NOT TRUST 100% of what you see on the Bricklink's
inventories. The situation is a mess and it is hard to impossible to expect perfect
accurecy on Bricklink.
|
|
| Author: | SezaR | | Posted: | May 28, 2021 03:04 | | Subject: | Re: Inventory Change Request for Set 6059-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, AwesomeFresh writes:
| | Please make changes to the following inventory:
* Delete 1 Part 4502c Blue Minifigure, Plume Feather Large
* Delete 1 Part 4502a Blue Minifigure, Plume Feather Small
Comments from Submitter:
The only plume is a single blue Plume Feather Triple which is contained in the first minifigure entry. There are no other plumes. https://letsbuilditagain.com/instructions/6059/
|
Those parts came on sprue.
See for example
https://www.bricklink.com/message.asp?ID=1236911
|
|
| Author: | SezaR | | Posted: | May 24, 2021 14:40 | | Subject: | Re: Package tracking from Canada to the US | | Viewed: | 19 times | | Topic: | Shipping | |
|
| In Shipping, MrPetovan writes:
| | Disappointed update: No news of either packages yet, one was probably shipped
on May 10th, the other on May 17th, I'm contemplating never ordering from
Canadian stores again despite the overall lower part prices thanks to the USD-CAD
conversion rate. It really isn't anything personal, I'm just too impatient
and not knowing the whereabouts of packages doesn't help setting my expectations.
I've hopefully checked my mailbox every day last week but I've been systematically
disappointed.
|
10 or 17th May?!
In average it takes 3 weeks.
A letter without tracking from USA to Canada including sticker sheets took once
about 2 months (before Pandemic) I wrote to seller if he shipped but did not
bug him for refund or anything. I just waited and it got delivered.
If you are so impatient, you can always ask sellers to ship with Express option
or Fedex or UPS? It will cost a lot but you get your order within 3-7 days once
it is shipped.
| |
In Shipping, MrPetovan writes:
| | As I'm impatiently waiting for a couple of untracked packages from Canada
to reach me in the US since I have no way to know when they will arrive, I recall
that in the same order batch I already received a tracked package from Canada
and the shipping fee wasn't higher than for the untracked ones.
Is there a specific condition for Canadian Sellers to obtain a tracking number
for their packages to the US? Or is it a lesser known feature that they can offer
tracking to US Buyers at no/little added cost?
This question is just a thin-veiled beg for Canadian stores to offer tracking
to me personally since I have a hard time dealing with not knowing when packages
arrive. I have been spoiled by the USPS tracking service and I was elated to
find out it could also work with Canadian packages, except few Canadian sellers
offer this feature.
|
|
|
|
|
| In Catalog Identification, terra85td writes:
| | Hello,
I have a new sealed bag with about 20-25 pcs of 4166 inside. I can't count
them in the bag they get confused and I can't find a set or a code to sell
them as new all in bulk ... can anyone help me?
|
I may be interested.
How many of them are exactly inside the bag?
Are the parts actually
or maybe
?
|
|
| Author: | SezaR | | Posted: | May 21, 2021 17:17 | | Subject: | Re: Train Part from Set 727 question | | Viewed: | 38 times | | Topic: | Catalog Identification | |
|
| Maybe you have parts from
The train
was never sold in Canada or USA.
In Catalog Identification, TorontoLego writes:
| | Thanks (again, and again and again)!
In Catalog Identification, starbeanie writes:
| |
In Catalog Identification, TorontoLego writes:
| |
* | | bb0037b Train Brick 2 x 4 x 1 1/3 Sliding Block with Wheels Holder, Type b with Ledge
Parts: Train |
Seems correct for the wheel holder (once I removed the wheels).
And we have the base and the motor from the same set.
However, the inventory has this item
and the part we have is close. It has holes where the pins are supposed to be,
and the back looks like a tile. The image of the part in the inventory and
it's related parts all look to have the back of the pin showing through.
The ones we have look like it has a molded lid, but it doesn't pop out.
[p=bb0035b] seems to be almost correct.
In Catalog Identification, clearingtoys writes:
| | In Catalog Identification, TorontoLego writes:
| | It's a wheel!
It's a train!
It's a Mystery!
|
Could it be Part bb0037b Train Brick 2 x 4 x 1 1/3 Sliding Block with Wheels
Holder, Type b with Ledge?
|
|
|
|
|
|
| Author: | SezaR | | Posted: | May 20, 2021 15:48 | | Subject: | Re: 12v replacement motor manufactured in 1983? | | Viewed: | 38 times | | Topic: | General | |
|
| In General, Ellum writes:
| | I have the train 12v replacement motor item No x551. According to item info this
motor was not produced after 1977 but this one clearly says that it was manufactured
in 1983. How can that be? I dont recollect this motor being used in sets in the
80s. Should item info be updated or?
|
Very interesting.
I think they produced the service pack
for few years after the blue 12v era was over for those kids who still had them.
They did the same for gray era 12v. The production of 12v trains ended in 1990
and since 1991, the new era 9v began however TLG sold service packs up to 1994.
|
|
| Author: | SezaR | | Posted: | May 19, 2021 18:43 | | Subject: | Re: Package tracking from Canada to the US | | Viewed: | 21 times | | Topic: | Shipping | |
|
| | | This question is just a thin-veiled beg for Canadian stores to offer tracking
to me personally since I have a hard time dealing with not knowing when packages
arrive. I have been spoiled by the USPS tracking service and I was elated to
find out it could also work with Canadian packages, except few Canadian sellers
offer this feature.
|
To check the prices, go here
https://www.canadapost-postescanada.ca/information/app/far/business/findARate?execution=e1s1
You can request the seller to ship with tracking so that they invoicce you the
more expensive option.
The only lost pacakge I sent to USA had tracking and the tracking said "delivered"
(I 100% trust the buyer)
If the value of your item is low, don't bother with tracking. Having tracking
does not mean your pacakge will less likely get lost. The package will follow
the same route, with or without tracking.
If the value of your package is high, it will most likely get tracking (and insurance).
|
|
| Author: | SezaR | | Posted: | May 17, 2021 19:29 | | Subject: | Re: Inventory Change Request for Set 6377-1 | | Viewed: | 26 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Add 1 Part BA129pb01 White Stickered Assembly with Yellow Boxes and Arrows Pattern Model Right Side (Sticker) - Set 6377 - 1 Brick 1 x 8, 1 Brick 1 x 6, 1 Brick 1 x 1 (Counterpart)
* Add 1 Part BA132pb01 White Stickered Assembly 10 x 1 x 2 with Yellow Boxes and Arrows Pattern Model Left Side (Sticker) - Set 6377 - 1 Brick 1 x 8, 1 Brick 1 x 6, 1 Brick 1 x 2 (Counterpart)
* Delete 2 Part 4276a Black Hinge Plate 1 x 2 with 2 Fingers and Solid Studs
* Add 2 Part 4276 Black Hinge Plate 1 x 2 with 2 Fingers
Comments from Submitter:
Evidence will be uploaded soon.
|
Randy,
Evidence will never be uploaded 
Shortly after this request,
https://www.bricklink.com/message.asp?ID=1159167
I made more effort: I shaked my sealed box for 10 minutes hoping the plastic
bags underneath sliding through the bigger plastic bags above them, but it did
not work. Then I held the box backward on the air and tried to hold the bigger
plastic bags (which were now under the smaller bags) and then, I shaked the box,
left and right, up and down, for few minutes. Finally the black hinges were revealed.
Unfortunately, shortly after, my tablet died and I lost all photos. I checked
my emails, google photo,... but I did not find them.
I also requested to remove the hinges with solid stud because I have had about
five copies of this set but none came with hinges with solid stud. So I think
we need some evidence to have them.
Cheers
|
This request can be accepted. I had a sealed one. After 30 min effort, I managed
to see the hinges with hollow studs.
There is absolutely no evidence that hinges with solid stud appeared in this
set, but I have had about 5-6 used copies with hollow-stud version, so I think
we can remove them.
Having worked with inventories of 7735 and 7745, both from 1985, I am sure the
hollow-stud hinges were produced since early 1985 and these two trains did never
come with hollow-stud versions.
We cannot check all copies produced of a set released in 1985 or later, but I
think, once we have evidence that a set came with solid-stud then once we can
check some used copies of sets from 1985 or later and see that they all came
with hollow-stud version, we can assume the solid-stud version did never appear
in any copy of that set.
|
|
| Author: | SezaR | | Posted: | May 16, 2021 19:26 | | Subject: | Re: Inventory Change Request for Set 7750-1 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| | In Inventories Requests, SezaR writes:
We decided to not add alternates for assembled/separate parts which are already
in the regular items section.
Instead, inventory notes will be added to handle such situations. So you may
delete the other requests.
So for now we have
and
* | | bb0012vac01 (Inv) Electric, Train Motor 12V with Wheels Type I with 2 Round Contact Holes with 4 Light Gray Train Rim for 4.5V & 12V Locomotive Wheels (bb0012va / trainrim)
Parts: Electric, Train {Red} |
as regular parts as both assemblies can be seen in some of those pics of new
sets.
Do you have a photo which shows
without rim in this set? I have seen the loose rims (6 in one or two copies),
but no loose wheels so far.
|
Yes, My own new copy.
| |
And could you please submit an inventory for
?
|
Done
| |
----------------------------------------------------
BTW did nobody notice that
had an unnessary match ID for 3 years? 
Well, I fixed this now.
|
You have master eyes
|
|
| Author: | SezaR | | Posted: | May 16, 2021 18:52 | | Subject: | Inventory Change Request for Set 9605-2 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 4350c02 Light Gray Electric 4.5V 3 C-Cell Battery Box with Switch 4 x 24
* Add 2 Part 4352 Light Gray Electric 4.5V 3 C-Cell Battery Box Polarity Switch 2 x 4
* Add 2 Part 4350c01 Light Gray Electric 4.5V 3 C-Cell Battery Box without Switch 4 x 22
Comments from Submitter:
https://www.worthpoint.com/worthopedia/lego-dacta-technic-5v-resource-set-537091747
|
|
| Author: | SezaR | | Posted: | May 16, 2021 18:42 | | Subject: | Re: Inventory Change Request for Set 8700-1 | | Viewed: | 10 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 1 Part 4350c02 Light Gray Electric 4.5V 3 C-Cell Battery Box with Switch 4 x 24
* Add 1 Part 4352 Light Gray Electric 4.5V 3 C-Cell Battery Box Polarity Switch 2 x 4
* Add 1 Part 4350c01 Light Gray Electric 4.5V 3 C-Cell Battery Box without Switch 4 x 22
|
|
|
|
| Author: | SezaR | | Posted: | May 16, 2021 18:42 | | Subject: | Inventory Change Request for Set 8700-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 4350c02 Light Gray Electric 4.5V 3 C-Cell Battery Box with Switch 4 x 24
* Add 1 Part 4352 Light Gray Electric 4.5V 3 C-Cell Battery Box Polarity Switch 2 x 4
* Add 1 Part 4350c01 Light Gray Electric 4.5V 3 C-Cell Battery Box without Switch 4 x 22
|
|
| Author: | SezaR | | Posted: | May 16, 2021 18:38 | | Subject: | Re: Inventory Change Request for Set 8054-1 | | Viewed: | 8 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 1 Part 4350c02 Light Gray Electric 4.5V 3 C-Cell Battery Box with Switch 4 x 24
* Add 1 Part 4352 Light Gray Electric 4.5V 3 C-Cell Battery Box Polarity Switch 2 x 4
* Add 1 Part 4350c01 Light Gray Electric 4.5V 3 C-Cell Battery Box without Switch 4 x 22
* Delete 1 Part x466 Light Gray Electric, Wire 12V / 4.5V with two Leads, unspecified length
* Delete 2 Part 766c01 Light Gray Electric, Connector, 2-Way Male Squared Narrow Long with Center Post
* Add 1 Part 766c96 Light Gray Electric, Wire 12V / 4.5V with 2 Leads, 96 Studs Long with 2 Light Gray Electric, Connector, 2-Way Male Squared Narrow Long with Center Post (x466c96 / 766c01)
|
New
https://www.worthpoint.com/worthopedia/lego-system-game-8054-technic-1816781896
https://www.worthpoint.com/worthopedia/vintage-lego-technic-universal-5v-1834623616
Some used set to check the length of wire. As usual about 75cm:
https://picclick.de/Lego-8054-Technic-Universal-Building-Set-mit-45V-154453244259.html
https://picclick.de/Lego-Technic-8054-OVP-Bauanleitung-124725611624.html
|
|
| Author: | SezaR | | Posted: | May 16, 2021 18:36 | | Subject: | Inventory Change Request for Set 8054-1 | | Viewed: | 12 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 4350c02 Light Gray Electric 4.5V 3 C-Cell Battery Box with Switch 4 x 24
* Add 1 Part 4352 Light Gray Electric 4.5V 3 C-Cell Battery Box Polarity Switch 2 x 4
* Add 1 Part 4350c01 Light Gray Electric 4.5V 3 C-Cell Battery Box without Switch 4 x 22
* Delete 1 Part x466 Light Gray Electric, Wire 12V / 4.5V with two Leads, unspecified length
* Delete 2 Part 766c01 Light Gray Electric, Connector, 2-Way Male Squared Narrow Long with Center Post
* Add 1 Part 766c96 Light Gray Electric, Wire 12V / 4.5V with 2 Leads, 96 Studs Long with 2 Light Gray Electric, Connector, 2-Way Male Squared Narrow Long with Center Post (x466c96 / 766c01)
|
|
| Author: | SezaR | | Posted: | May 16, 2021 18:29 | | Subject: | Inventory Change Request for Set 9860-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 4350c02 Light Gray Electric 4.5V 3 C-Cell Battery Box with Switch 4 x 24
* Add 1 Part 4350c01 Light Gray Electric 4.5V 3 C-Cell Battery Box without Switch 4 x 22
* Add 1 Part 4352 Light Gray Electric 4.5V 3 C-Cell Battery Box Polarity Switch 2 x 4
|
|
| Author: | SezaR | | Posted: | May 16, 2021 18:27 | | Subject: | Re: Inventory Change Request for Set 8055-1 | | Viewed: | 11 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 1 Part 4350c02 Light Gray Electric 4.5V 3 C-Cell Battery Box with Switch 4 x 24
* Add 1 Part 4352 Light Gray Electric 4.5V 3 C-Cell Battery Box Polarity Switch 2 x 4
* Add 1 Part 4350c01 Light Gray Electric 4.5V 3 C-Cell Battery Box without Switch 4 x 22
|
Ebay Id
324369637063
|
|
|
| Author: | SezaR | | Posted: | May 16, 2021 18:26 | | Subject: | Inventory Change Request for Set 8055-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 4350c02 Light Gray Electric 4.5V 3 C-Cell Battery Box with Switch 4 x 24
* Add 1 Part 4352 Light Gray Electric 4.5V 3 C-Cell Battery Box Polarity Switch 2 x 4
* Add 1 Part 4350c01 Light Gray Electric 4.5V 3 C-Cell Battery Box without Switch 4 x 22
|
|
| Author: | SezaR | | Posted: | May 16, 2021 18:14 | | Subject: | Inventory Change Request for Set 9860-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4350 Light Gray Electric 4.5V 3 C-Cell Battery Box (Bottom Half) 4 x 22
* Add 1 Part 4351 Light Gray Electric 4.5V 3 C-Cell Battery Box (Top Half) 4 x 22
* Delete 1 Part 4350c02 Light Gray Electric 4.5V 3 C-Cell Battery Box with Switch 4 x 24
|
|
| Author: | SezaR | | Posted: | May 16, 2021 18:11 | | Subject: | Inventory Change Request for Set 5100-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4350c01 Light Gray Electric 4.5V 3 C-Cell Battery Box without Switch 4 x 22
* Add 1 Part 4352 Light Gray Electric 4.5V 3 C-Cell Battery Box Polarity Switch 2 x 4
* Delete 1 Part 4350c02 Light Gray Electric 4.5V 3 C-Cell Battery Box with Switch 4 x 24
* Add 1 Book binfbateu3 Information about the battery box (104278)
Comments from Submitter:
I think it is better to include binfbateu3 as "book" like for set 740, instead of instructions.
|
|
| Author: | SezaR | | Posted: | May 16, 2021 18:00 | | Subject: | Re: Inventory Change Request for Set 10027-1 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| | In Inventories Requests, axaday writes:
| | In Inventories Requests, Turez writes:
| | And would you mind submitting proper requests for the 4032b? 
|
I don't understand
|
Now I understand...
|
I don't understand.
|
|
|
| Author: | SezaR | | Posted: | May 14, 2021 16:27 | | Subject: | Inventory Change Request for Set 7750-1 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part bb0012va Red Electric, Train Motor 12V with Wheels Type I with 2 Round Contact Holes
* Add 1 Part bb0012vac01 Red Electric, Train Motor 12V with Wheels Type I with 2 Round Contact Holes with 4 Light Gray Train Rim for 4.5V & 12V Locomotive Wheels (bb0012va / trainrim) (match ID 1)
* Add 2 Part bb0012v2ac01 Red Train Wheel Middle for 12V Motor with Light Gray Train Rim (bb0012v2 / trainrim) (match ID 1)
* Change 2 Part Red bb0012v2 Train Wheel, Middle Wheel for 12V Motor {Regular to Alternate} {match ID 0 to 1}
* Change {6 to 2} Part Light Gray trainrim Train Rim for 4.5V & 12V Locomotive Wheels {Regular to Alternate} {match ID 0 to 1}
|
|
| Author: | SezaR | | Posted: | May 14, 2021 16:14 | | Subject: | Re: Inventory Change Request for Set 371-2 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| | In Inventories Requests, SezaR writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Add 1 Part bb0007pb01 Blue Electric, Motor 4.5V Type A 12 x 4 x 4 with '4,5 V.' (4.5 Volt) Pattern Stamped (Alternate) (match ID 1)
* Delete 4 Part 996ac01 Blue Electric, Connector, 1-Way Male Rounded with Hollow Pin (Banana Plug)
* Delete 1 Part x466 White Electric, Wire 12V / 4.5V with two Leads, unspecified length
* Add 1 Part 996ac96blue White Electric, Wire 4.5V with four Blue 1-prong Connectors Hollow Pin, 96 Studs Long
* Add 1 Part 3176c01 Red Plate, Modified 3 x 2 with Hole (Train Coupler Closed) with Hook
* Add 2 Part 3034 White Plate 2 x 8
* Change 1 Part Blue bb0007 Electric, Motor 4.5V Type A 12 x 4 x 4 {match ID 0 to 1}
* Change {1 to 2} Part Red 3176 Plate, Modified 3 x 2 with Hole
|
I believe
[p=]
was produced since 1968
|
???
|
I believe (based on my research)
[p=bb0007pb01]
was produced since 1968
|
|
| Author: | SezaR | | Posted: | May 14, 2021 14:04 | | Subject: | Inventory Change Request for Set 4555-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part BA271pb01a Yellow Stickered Assembly 28 x 1 x 1 2/3 with '10m' Maximum Height Warning Signs Pattern Side A (Stickers) - Set 4555 - 6 Plate 1 x 8, 7 Brick Modified 1 x 4 with Groove (Counterpart)
* Add 1 Part BA271pb01b Yellow Stickered Assembly 28 x 1 x 1 2/3 with '10m' Maximum Height Warning Signs Pattern Side B (Stickers) - Set 4555 - 6 Plate 1 x 8, 7 Brick Modified 1 x 4 with Groove (Counterpart)
|
|
|
| Author: | SezaR | | Posted: | May 14, 2021 02:22 | | Subject: | Inventory Change Request for Set 7750-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part bb0012vac01 Red Electric, Train Motor 12V with Wheels Type I with 2 Round Contact Holes with 4 Light Gray Train Rim for 4.5V & 12V Locomotive Wheels (bb0012va / trainrim) (match ID 1)
* Add 2 Part bb0012v2ac01 Red Train Wheel Middle for 12V Motor with Light Gray Train Rim (bb0012v2 / trainrim) (match ID 1)
* Change 2 Part Red bb0012v2 Train Wheel, Middle Wheel for 12V Motor {Regular to Alternate} {match ID 0 to 1}
* Change 1 Part Red bb0012va Electric, Train Motor 12V with Wheels Type I with 2 Round Contact Holes {Regular to Alternate} {match ID 0 to 1}
|
|
| Author: | SezaR | | Posted: | May 14, 2021 02:19 | | Subject: | Re: Inventory Change Request for Set 371-2 | | Viewed: | 12 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Add 1 Part bb0007pb01 Blue Electric, Motor 4.5V Type A 12 x 4 x 4 with '4,5 V.' (4.5 Volt) Pattern Stamped (Alternate) (match ID 1)
* Delete 4 Part 996ac01 Blue Electric, Connector, 1-Way Male Rounded with Hollow Pin (Banana Plug)
* Delete 1 Part x466 White Electric, Wire 12V / 4.5V with two Leads, unspecified length
* Add 1 Part 996ac96blue White Electric, Wire 4.5V with four Blue 1-prong Connectors Hollow Pin, 96 Studs Long
* Add 1 Part 3176c01 Red Plate, Modified 3 x 2 with Hole (Train Coupler Closed) with Hook
* Add 2 Part 3034 White Plate 2 x 8
* Change 1 Part Blue bb0007 Electric, Motor 4.5V Type A 12 x 4 x 4 {match ID 0 to 1}
* Change {1 to 2} Part Red 3176 Plate, Modified 3 x 2 with Hole
|
I believe
[p=]
was produced since 1968
Two
and one
are used in an alternate model.
http://www.peeron.com/scans/371-2/8
Source
https://www.worthpoint.com/worthopedia/vintage-lego-model-maker-set-371-1816522149
I am sure more changes need to be done for this set.
|
|
|
| Author: | SezaR | | Posted: | May 14, 2021 00:42 | | Subject: | Inventory Change Request for Set 371-2 | | Viewed: | 33 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part bb0007pb01 Blue Electric, Motor 4.5V Type A 12 x 4 x 4 with '4,5 V.' (4.5 Volt) Pattern Stamped (Alternate) (match ID 1)
* Delete 4 Part 996ac01 Blue Electric, Connector, 1-Way Male Rounded with Hollow Pin (Banana Plug)
* Delete 1 Part x466 White Electric, Wire 12V / 4.5V with two Leads, unspecified length
* Add 1 Part 996ac96blue White Electric, Wire 4.5V with four Blue 1-prong Connectors Hollow Pin, 96 Studs Long
* Add 1 Part 3176c01 Red Plate, Modified 3 x 2 with Hole (Train Coupler Closed) with Hook
* Add 2 Part 3034 White Plate 2 x 8
* Change 1 Part Blue bb0007 Electric, Motor 4.5V Type A 12 x 4 x 4 {match ID 0 to 1}
* Change {1 to 2} Part Red 3176 Plate, Modified 3 x 2 with Hole
|
|
| Author: | SezaR | | Posted: | May 13, 2021 07:52 | | Subject: | Re: Inventory Change Request for Set 1497-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 1 Part 4073 Trans-Green Plate, Round 1 x 1 (Extra)
* Delete 1 Part 4073 Trans-Red Plate, Round 1 x 1 (Extra)
* Delete 6 Part 4624 White Wheel 8mm D. x 6mm
* Delete 6 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 4 Part 4073 Black Plate, Round 1 x 1
* Add 2 Part 4073c01 Black Plate, Round 1 x 1, 2 on Sprue
* Delete 2 Part 4073 Trans-Clear Plate, Round 1 x 1
* Add 1 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
* Delete 1 Part 4073 Trans-Green Plate, Round 1 x 1
* Add 1 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Delete 1 Part 4073 Trans-Red Plate, Round 1 x 1
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1
* Add 1 Part 4073c01 Trans-Green Plate, Round 1 x 1, 2 on Sprue
* Change 6 Part White 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
|
NO proof and I do not think any new opened copy will come along.
The piece-count on Canadian box is 110 and on American box is 109.
With these changes, the piece-count will be 110.
Canada and USA never got along with each other...well at least when it came with
piece-count
Note that the trans-red and trans-green plates, round 1x1 that are listed as
extra are used on alternate models. See photos.
|
|
|
| Author: | SezaR | | Posted: | May 13, 2021 07:48 | | Subject: | Inventory Change Request for Set 1497-1 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 4073 Trans-Green Plate, Round 1 x 1 (Extra)
* Delete 1 Part 4073 Trans-Red Plate, Round 1 x 1 (Extra)
* Delete 6 Part 4624 White Wheel 8mm D. x 6mm
* Delete 6 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 4 Part 4073 Black Plate, Round 1 x 1
* Add 2 Part 4073c01 Black Plate, Round 1 x 1, 2 on Sprue
* Delete 2 Part 4073 Trans-Clear Plate, Round 1 x 1
* Add 1 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
* Delete 1 Part 4073 Trans-Green Plate, Round 1 x 1
* Add 1 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Delete 1 Part 4073 Trans-Red Plate, Round 1 x 1
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1
* Add 1 Part 4073c01 Trans-Green Plate, Round 1 x 1, 2 on Sprue
* Change 6 Part White 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
|
|
| Author: | SezaR | | Posted: | May 11, 2021 20:19 | | Subject: | Inventory Change Request for Set 1239-2 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 766c190 Light Gray Electric, Wire 12V / 4.5V with two 2-prong connectors, 190 Studs Long
* Delete 2 Part 766c01 Light Gray Electric, Connector, 2-Way Male Squared Narrow Long with Center Post
* Delete 1 Part x466 Light Gray Electric, Wire 12V / 4.5V with two Leads, unspecified length
Comments from Submitter:
I have this set. It is actually the same as 7863-1.
|
|
| Author: | SezaR | | Posted: | May 11, 2021 04:52 | | Subject: | Re: Inventory Change Request for Set 354-1 | | Viewed: | 30 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, gtongue writes:
| | In Inventories Requests, SezaR writes:
| | In Inventories Requests, gtongue writes:
| | Please make changes to the following inventory:
* Add 2 Part 3002old Blue Brick 2 x 3 without Cross Supports (Alternate)
* Add 9 Part 3001old Blue Brick 2 x 4 without Cross Supports (Alternate)
Comments from Submitter:
Instructions step 9 top of tower is 2x3002old + 3x3001old not 6x3002old as listed in current inventory. My version is dated 1974 and instructions are numbered 97283
|
Can you please upload a photo of your instructions from step 9?
|
Hi SezaR, photos uploaded as requested.
|
Ok this is the same as the one uploaded on Peeron. Now the question is if there
is a second version different than yours?
|
|
| Author: | SezaR | | Posted: | May 10, 2021 16:27 | | Subject: | Re: Inventory Change Request for Set 354-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, gtongue writes:
| | Please make changes to the following inventory:
* Add 2 Part 3002old Blue Brick 2 x 3 without Cross Supports (Alternate)
* Add 9 Part 3001old Blue Brick 2 x 4 without Cross Supports (Alternate)
Comments from Submitter:
Instructions step 9 top of tower is 2x3002old + 3x3001old not 6x3002old as listed in current inventory. My version is dated 1974 and instructions are numbered 97283
|
Can you please upload a photo of your instructions from step 9?
|
|
| Author: | SezaR | | Posted: | May 7, 2021 19:11 | | Subject: | Re: Inventory Change Request for Set 1083-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 2 Part 6232 Red Brick, Modified 2 x 2 with Pin and Axle Hole
* Add 2 Part 4730 Red Brick, Modified 2 x 2 with Pin and No Axle Hole
|
|
|
| Author: | SezaR | | Posted: | May 7, 2021 19:10 | | Subject: | Inventory Change Request for Set 1083-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 6232 Red Brick, Modified 2 x 2 with Pin and Axle Hole
* Add 2 Part 4730 Red Brick, Modified 2 x 2 with Pin and No Axle Hole
|
|
| Author: | SezaR | | Posted: | May 5, 2021 19:00 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 23 times | | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| | Greetings BrickLink catalog enthusiasts!
You will be pleased to learn that we have just today appointed a new Catalog
Associate - Randyf. Randy has served as an Inventories Administrator for the
last couple years and has done a fantastic job. We feel this promotion, though
it has been long in coming, is very well deserved.
As a reminder to those who are still learning about the BrickLink Community Expert
Program, the Catalog Associate position gives admin privileges over the entire
catalog half of our BrickLink system. After one year's experience, Catalog
Associates are eligible for promotion to full Catalog Admin, which gives them
full privileges on both sides, for both catalog and inventories.
https://www.bricklink.com/memberAdmins.asp
We plan to update the Hall of Fame page very soon. There are several things to
add, including Randy's time serving as Inventory Admin.
Please welcome our new associate!
|
Such a great news.
Welcome abord Randy
As a first step, what about addking 100 items to the catalog?
|
|
| Author: | SezaR | | Posted: | May 5, 2021 00:43 | | Subject: | Re: 6950 piece count on box | | Viewed: | 49 times | | Topic: | Inventories | |
|
| In Inventories, samsam2 writes:
| | You can see in the additional image for the box I just submitted for set
the piece count is 220. Whereas the current inventory for the set with minifigs
broken down gives a part count of 207, a difference of 13 pieces.
I guess this is common in old sets? But there could have been 'extras'
included but not needed in the instructions? Or is this another 'packaged
by Samsonite' difference?
|
The piececount on the USA version is 202.
Each minifig (with airtank) is in general counted as 4 pieces;
If they counted head and torso separately, it would be counted as 5 pieces.
So we get
197+2*4=205
197+2*5=207
We can take out shot and take average of the two piece-counts:
(202+220)/2 = 211
Still not 202 nor 220
It is not gonna be 202 or 220. So we need to investigate further:
Upon checking images available on google, we realize there are two piece-counts
for Canadian boxes. One is correctly 220 and the other one is 205! See photos
two and three.
This suggests that TLG realized the mistake happened and corrected it in later
production. The correct piece-count for minifigs is 3 (here 4 because of yellow
airtank):
197+2*4=205
In the last photo, we see the two minifigs very happy for this conclusion.
|
|
|
| Author: | SezaR | | Posted: | May 3, 2021 18:04 | | Subject: | Re: Inventory Change Request for Set 725-2 | | Viewed: | 14 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Add 1 Part 2913c03 Blue Electric, Train Track Contact Base with Wire (97cm) with Blue Electric, Connector, 2-Way Male Rounded Wide Long with Cross-Cut Pins (2913 / bb0093bc01) (match ID 3)
* Change 1 Part Blue 2913c04 Electric, Train Track Contact Base with Wire (97cm) with Light Gray Electric, Connector, 2-Way Male Rounded Wide Long with Cross-Cut Pins (2913 / bb0093bc01) {Regular to Alternate} {match ID 0 to 3}
|
https://www.worthpoint.com/worthopedia/1960s-lego-725-12v-train-set-box-469726029
More about connectors
https://www.bricklink.com/message.asp?ID=1267712
|
|
|
| Author: | SezaR | | Posted: | May 3, 2021 18:01 | | Subject: | Inventory Change Request for Set 725-2 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 2913c03 Blue Electric, Train Track Contact Base with Wire (97cm) with Blue Electric, Connector, 2-Way Male Rounded Wide Long with Cross-Cut Pins (2913 / bb0093bc01) (match ID 3)
* Change 1 Part Blue 2913c04 Electric, Train Track Contact Base with Wire (97cm) with Light Gray Electric, Connector, 2-Way Male Rounded Wide Long with Cross-Cut Pins (2913 / bb0093bc01) {Regular to Alternate} {match ID 0 to 3}
|
|
| Author: | SezaR | | Posted: | Apr 30, 2021 15:28 | | Subject: | Re: Inventory Change Request for Set 725-2 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Add 1 Part 2913c03 White Electric, Train Track Contact Base with Wire (97cm) with Blue Electric, Connector, 2-Way Male Rounded Wide Long with Cross-Cut Pins (2913 / bb0093bc01) (match ID 3)
* Add 1 Part 2913c04 White Electric, Train Track Contact Base with Wire (97cm) with Light Gray Electric, Connector, 2-Way Male Rounded Wide Long with Cross-Cut Pins (2913 / bb0093bc01) (Alternate) (match ID 3)
|
Source: Bluxe
https://www.bricklink.com/message.asp?ID=1184378
|
|
| Author: | SezaR | | Posted: | Apr 30, 2021 03:58 | | Subject: | Re: Inventory Change Request for Set 727-1 | | Viewed: | 14 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 8 Part trainrim Black Train Rim for 4.5V & 12V Locomotive Wheels
* Delete 8 Part wheel2a Black Train Wheel Spoked for Motor
* Change 8 Part Black wheel2ac01 Train Wheel Spoked for Motor with Black Train Rim for 4.5V & 12V Locomotive Wheels (wheel2a / trainrim) {Counterpart to Regular}
|
|
|
|
| Author: | SezaR | | Posted: | Apr 30, 2021 03:57 | | Subject: | Inventory Change Request for Set 727-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 8 Part trainrim Black Train Rim for 4.5V & 12V Locomotive Wheels
* Delete 8 Part wheel2a Black Train Wheel Spoked for Motor
* Change 8 Part Black wheel2ac01 Train Wheel Spoked for Motor with Black Train Rim for 4.5V & 12V Locomotive Wheels (wheel2a / trainrim) {Counterpart to Regular}
|
|
| Author: | SezaR | | Posted: | Apr 29, 2021 19:43 | | Subject: | Inventory Change Request for Set 725-2 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 2913c03 White Electric, Train Track Contact Base with Wire (97cm) with Blue Electric, Connector, 2-Way Male Rounded Wide Long with Cross-Cut Pins (2913 / bb0093bc01) (match ID 3)
* Add 1 Part 2913c04 White Electric, Train Track Contact Base with Wire (97cm) with Light Gray Electric, Connector, 2-Way Male Rounded Wide Long with Cross-Cut Pins (2913 / bb0093bc01) (Alternate) (match ID 3)
|
|
| Author: | SezaR | | Posted: | Apr 29, 2021 16:15 | | Subject: | Inventory Change Request for Set 8846-1 | | Viewed: | 31 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part x77 Black String, Cord (Undetermined Type)
* Add 2 Part x77ac75 Black String, Cord Thin 75cm
Comments from Submitter:
I bought a lot of technic sets from Germany. The sets, including this one were pre built and were very dusty. I think I bought them from the original owner.
I checked the length of wires (still attached to the hook and technic axles) and they are of length about 75cm.
|
|
| Author: | SezaR | | Posted: | Apr 29, 2021 15:59 | | Subject: | Inventory Change Request for Set 722-2 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 4 Part trainrim Black Train Rim for 4.5V & 12V Locomotive Wheels
* Delete 4 Part wheel2a Red Train Wheel Spoked for Motor
* Delete 4 Part 737a Red Plate, Modified 2 x 4 with Train Coupler Open for Magnet
* Delete 2 Part x547b Red Magnet Coupling, Train - 7mm Cylinder
* Delete 2 Part x547b Blue Magnet Coupling, Train - 7mm Cylinder
* Add 2 Part 737ac01 Red Plate, Modified 2 x 4 with Train Coupler Open for Magnet with Same Color Magnet Coupling, Train - 7mm Cylinder (737a / x547b)
* Add 2 Part 737ac02 Red Plate, Modified 2 x 4 with Train Coupler Open for Magnet with Blue Magnet Coupling, Train - 7mm Cylinder (737a / x547b)
* Add 1 Part 2913c01 White Electric, Train Track Contact Base with Wire (97 cm) and Blue Connector, 2-Way Male Rounded Wide Long with Hollow Pins
* Change 4 Part Red wheel2ac01 Train Wheel Spoked for Motor with Black Train Rim for 4.5V & 12V Locomotive Wheels (wheel2a / trainrim) {Counterpart to Regular}
|
|
| Author: | SezaR | | Posted: | Apr 29, 2021 15:57 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 14 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 5 Part wheel2a Red Train Wheel Spoked for Motor
* Delete 5 Part trainrim Black Train Rim for 4.5V & 12V Locomotive Wheels
* Add 1 Part 2913c04 Light Gray Electric, Train Track Contact Base with Wire (97cm) with Light Gray Electric, Connector, 2-Way Male Rounded Wide Long with Cross-Cut Pins (2913 / bb0093bc01)
* Change 5 Part Red wheel2ac01 Train Wheel Spoked for Motor with Black Train Rim for 4.5V & 12V Locomotive Wheels (wheel2a / trainrim) {Counterpart to Regular}
|
I think you meant to put white for the color of the wire. I have updated this
manually.
Cheers,
Randy
|
It is still blue.
I think the color of the part should be white for consistency.
The Train Track Contact Base is singled color and it always came with white wire.
|
|
| Author: | SezaR | | Posted: | Apr 29, 2021 14:52 | | Subject: | Re: Set 8640, please remove 2714a (light grey) | | Viewed: | 36 times | | Topic: | Inventories | |
|
| In Inventories, 1974 writes:
| | In Inventories, randyf writes:
| | In Inventories, StonesHeart writes:
| | Hello All,
I own the set 8640 and item 2714a (light grey) shows nowhere in the instruction
or on the box.
|
|
| | They are used in Step 14 to build the frame of the cockpit.
|
It's rather obvious. How did you construct the set if you didn't use
the two light grey ski-poles?
|
It is not obvious. One can easily confuse this set
with
|
|
| Author: | SezaR | | Posted: | Apr 28, 2021 16:38 | | Subject: | Inventory Change Request for Set 726-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 5 Part wheel2a Red Train Wheel Spoked for Motor
* Delete 5 Part trainrim Black Train Rim for 4.5V & 12V Locomotive Wheels
* Add 1 Part 2913c04 Light Gray Electric, Train Track Contact Base with Wire (97cm) with Light Gray Electric, Connector, 2-Way Male Rounded Wide Long with Cross-Cut Pins (2913 / bb0093bc01)
* Change 5 Part Red wheel2ac01 Train Wheel Spoked for Motor with Black Train Rim for 4.5V & 12V Locomotive Wheels (wheel2a / trainrim) {Counterpart to Regular}
|
|
| Author: | SezaR | | Posted: | Apr 27, 2021 21:45 | | Subject: | Re: We have a new Inventories Administrator! | | Viewed: | 35 times | | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
Congradz Jonas
|
|
| Author: | SezaR | | Posted: | Apr 25, 2021 16:46 | | Subject: | Re: Inventory Change Request for Set 723-2 | | Viewed: | 17 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 4 Part wheel2a Red Train Wheel Spoked for Motor
* Delete 4 Part trainrim Black Train Rim for 4.5V & 12V Locomotive Wheels
* Add 2 Part bb0053b Black Electric, Train 12V Brick 2 x 4 with Power Pickup for Train Motor Type B and Type C (Alternate) (match ID 2)
* Add 1 Part x550b Black Electric, Train Motor 12V 12 x 4 x 3 1/3 with Three Side Holes (Alternate) (match ID 1)
* Add 1 Part 2913c03 Blue Electric, Train Track Contact Base with Wire (97cm) with Blue Electric, Connector, 2-Way Male Rounded Wide Long with Cross-Cut Pins (2913 / bb0093bc01) (match ID 3)
* Add 1 Part 2913c04 Blue Electric, Train Track Contact Base with Wire (97cm) with Light Gray Electric, Connector, 2-Way Male Rounded Wide Long with Cross-Cut Pins (2913 / bb0093bc01) (Alternate) (match ID 3)
* Change 4 Part Red wheel2ac01 Train Wheel Spoked for Motor with Black Train Rim for 4.5V & 12V Locomotive Wheels (wheel2a / trainrim) {Counterpart to Regular}
* Change 1 Part Black x550a Electric, Train Motor 12V 12 x 4 x 3 1/3 with Two Side Holes {match ID 0 to 1}
* Change 2 Part Black bb0053 Electric, Train 12V Brick 2 x 4 with Power Pickup for Train Motor Type B {match ID 0 to 2}
|
In the photo, we see
This variation of 4.5v/12v motor was first released in 1976 (never seen it in
a set produced in 1975 or earlier). The production date is
04 05 76
condifrming this (once more).
The power pick-ups
do not match/work with
so the pick-ups are
TLG produced the follwing parts in blue until the end of 1975 and then produced
them in light gra, since 1976. (why?! )
|
Item: 164830884337
|
|
|
| Author: | SezaR | | Posted: | Apr 25, 2021 16:44 | | Subject: | Re: Inventory Change Request for Set 723-2 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 4 Part wheel2a Red Train Wheel Spoked for Motor
* Delete 4 Part trainrim Black Train Rim for 4.5V & 12V Locomotive Wheels
* Add 2 Part bb0053b Black Electric, Train 12V Brick 2 x 4 with Power Pickup for Train Motor Type B and Type C (Alternate) (match ID 2)
* Add 1 Part x550b Black Electric, Train Motor 12V 12 x 4 x 3 1/3 with Three Side Holes (Alternate) (match ID 1)
* Add 1 Part 2913c03 Blue Electric, Train Track Contact Base with Wire (97cm) with Blue Electric, Connector, 2-Way Male Rounded Wide Long with Cross-Cut Pins (2913 / bb0093bc01) (match ID 3)
* Add 1 Part 2913c04 Blue Electric, Train Track Contact Base with Wire (97cm) with Light Gray Electric, Connector, 2-Way Male Rounded Wide Long with Cross-Cut Pins (2913 / bb0093bc01) (Alternate) (match ID 3)
* Change 4 Part Red wheel2ac01 Train Wheel Spoked for Motor with Black Train Rim for 4.5V & 12V Locomotive Wheels (wheel2a / trainrim) {Counterpart to Regular}
* Change 1 Part Black x550a Electric, Train Motor 12V 12 x 4 x 3 1/3 with Two Side Holes {match ID 0 to 1}
* Change 2 Part Black bb0053 Electric, Train 12V Brick 2 x 4 with Power Pickup for Train Motor Type B {match ID 0 to 2}
|
In the photo, we see
This variation of 4.5v/12v motor was first released in 1976 (never seen it in
a set produced in 1975 or earlier). The production date is
04 05 76
condifrming this (once more).
The power pick-ups
do not match/work with
so the pick-ups are
TLG produced the follwing parts in blue until the end of 1975 and then produced
them in light gra, since 1976. (why?! )
|
|
| Author: | SezaR | | Posted: | Apr 25, 2021 16:34 | | Subject: | Inventory Change Request for Set 723-2 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 4 Part wheel2a Red Train Wheel Spoked for Motor
* Delete 4 Part trainrim Black Train Rim for 4.5V & 12V Locomotive Wheels
* Add 2 Part bb0053b Black Electric, Train 12V Brick 2 x 4 with Power Pickup for Train Motor Type B and Type C (Alternate) (match ID 2)
* Add 1 Part x550b Black Electric, Train Motor 12V 12 x 4 x 3 1/3 with Three Side Holes (Alternate) (match ID 1)
* Add 1 Part 2913c03 Blue Electric, Train Track Contact Base with Wire (97cm) with Blue Electric, Connector, 2-Way Male Rounded Wide Long with Cross-Cut Pins (2913 / bb0093bc01) (match ID 3)
* Add 1 Part 2913c04 Blue Electric, Train Track Contact Base with Wire (97cm) with Light Gray Electric, Connector, 2-Way Male Rounded Wide Long with Cross-Cut Pins (2913 / bb0093bc01) (Alternate) (match ID 3)
* Change 4 Part Red wheel2ac01 Train Wheel Spoked for Motor with Black Train Rim for 4.5V & 12V Locomotive Wheels (wheel2a / trainrim) {Counterpart to Regular}
* Change 1 Part Black x550a Electric, Train Motor 12V 12 x 4 x 3 1/3 with Two Side Holes {match ID 0 to 1}
* Change 2 Part Black bb0053 Electric, Train 12V Brick 2 x 4 with Power Pickup for Train Motor Type B {match ID 0 to 2}
|
|
| Author: | SezaR | | Posted: | Apr 24, 2021 16:04 | | Subject: | Re: Inventory Change Request for Set 1053-1 | | Viewed: | 35 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Admin_Russell writes:
| | In Inventories Requests, MrPetovan writes:
| | You don't have to apologize, you don't owe anything to the BrickLink
catalog. Thank you for any work you are choosing to provide.
|
Sezar did not have to choose Sealed Set Contents as a source or even verify the
inventory. But people can lose their status as an inventories verifier if they
make too many mistakes:
https://www.bricklink.com/help.asp?helpID=206
The status of an Inventories Verifier can be removed from a member by an Inventories
Administrator if excessive errors are found in several inventories after the
member confirmed their accuracy.
If you agree to be placed on the verifiers list and you sign an inventory at
a certain verification level, you DO owe the site the time and energy it takes
to properly verify that inventory at the level you have claimed.
It's all volunteer, but people get credit for confirming inventories, credit
which could lead to them being considered for admin privileges. There are also
other privileges that come with being an inventories verifier that do involve
reimbursement, and and in those cases the obligation to the site is even higher.
|
I did check
- the correction of parts,
- the quantity
However, when it comes to the variations of parts, it is always possible to not
know a variation. (I can give examples of other inventory verifiers who missed
variations). There are so many parts and multiple variations. Having worked on
variations, I still may forget or am not aware of a variation for a particular
part.
Also, few months/years I verify accuracy a set, a part may get split into variations.
So here are two questions:
- to what extend should an inventory varifier check variations of parts?
- The set I had had boxed opened but content new and complete (except few big
plates). Did I have to choose "used set" or "sealed set content"? There is no
option "box opened content new in sealed bags".
|
|
| Author: | SezaR | | Posted: | Apr 23, 2021 18:33 | | Subject: | Re: Inventory Change Request for Set 1053-1 | | Viewed: | 58 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| | In Inventories Requests, SezaR writes:
| | Jonas asked me to check these parts too. Thank!
|
If you are going to confirm an inventory from "Sealed Set Contents" as a registered
Inventories Verifier, you better make sure to check the entire inventory.
|
My apologies for missing few variations out of checking the quantities, parts
and variations of over 850 parts.
|
|
| Author: | SezaR | | Posted: | Apr 23, 2021 16:03 | | Subject: | Re: Inventory Change Request for Set 1053-1 | | Viewed: | 49 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Add 1 Part 3962a Black Minifigure, Utensil Radio with Compact Handle (match ID 11)
* Add 2 Part 193b2 Red Minifigure, Headgear Helmet Space / Town with Thick Chin Strap - with Visor Dimples (match ID 12)
* Add 1 Part 193b2 White Minifigure, Headgear Helmet Space / Town with Thick Chin Strap - with Visor Dimples (Alternate) (match ID 4)
* Change 1 Part Black 3962b Minifigure, Utensil Radio with Extended Handle {Regular to Alternate} {match ID 0 to 11}
* Change 1 Part White 193b1 Minifigure, Headgear Helmet Space / Town with Thick Chin Strap - without Visor Dimples {match ID 0 to 12}
|
Jonas asked me to check these parts too. Thank!
Again, my copy is a relative early version, either 1985 or 1986.
The box arts show
so that should come as regular.
|
|
| Author: | SezaR | | Posted: | Apr 23, 2021 16:00 | | Subject: | Inventory Change Request for Set 1053-1 | | Viewed: | 79 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3962a Black Minifigure, Utensil Radio with Compact Handle (match ID 11)
* Add 2 Part 193b2 Red Minifigure, Headgear Helmet Space / Town with Thick Chin Strap - with Visor Dimples (match ID 12)
* Add 1 Part 193b2 White Minifigure, Headgear Helmet Space / Town with Thick Chin Strap - with Visor Dimples (Alternate) (match ID 4)
* Change 1 Part Black 3962b Minifigure, Utensil Radio with Extended Handle {Regular to Alternate} {match ID 0 to 11}
* Change 1 Part White 193b1 Minifigure, Headgear Helmet Space / Town with Thick Chin Strap - without Visor Dimples {match ID 0 to 12}
|
|
| Author: | SezaR | | Posted: | Apr 22, 2021 13:07 | | Subject: | Re: Inventory Change Request for Set 851-1 | | Viewed: | 17 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, mugna70 writes:
| | Please make changes to the following inventory:
* Add 1 Part 3713 Light Gray Technic Bush
Comments from Submitter:
I have personally assembled the set, and I can say that the missing piece serves to block the plough more easily (as visible on the back of the box). I would also like to add that there are two other pieces missing from the inventory, the ID of which I cannot find (they are two red half-cubes on top of the plough wheels).
|
This set is redesigned during its production. Have you seen this note at the
bottom of the inventory:
Redesigned during production.
There are at least 2 different versions of instructions for this set. The differences
for the second version are indicated in this inventory in the Alternate Items
section with Match ID 99.
Quick overview of redesign: The 3-point hitch is strengthened to handle heavier
implements. Also, a spacer and a 1 x 8 plate are added to the main implement
and two 1 x 1 plates are added under the seat.
|
|
| Author: | SezaR | | Posted: | Apr 21, 2021 22:36 | | Subject: | Re: Inventory Change Request for Set 7720-1 | | Viewed: | 25 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, gunga writes:
| | Please make changes to the following inventory:
* Add 1 Part 4181pb081 Red Door 1 x 4 x 5 Train Left with White 'NSB 7720' Pattern (Sticker) - Set 7720 (Counterpart)
* Add 1 Part 3443c09pb01 Blue Train Battery Box Car with Three Contact Holes, Red Switch Lever, Blue and Red Magnets, and Red Wheels with Hinged Doors Pattern on Both Sides (Stickers) - Set 7720 (Counterpart)
* Add 1 Part 3443c10pb03 Blue Train Battery Box Car with Two Contact Holes, Red Switch Lever, Blue and Red Magnets, and Red Wheels with Hinged Doors Pattern on Both Sides (Stickers) - Set 7720 (Counterpart)
|
* | | 3443c10pb03 Train Battery Box Car with Two Contact Holes, Red Switch Lever, Blue and Red Magnets, and Red Wheels with Hinged Doors Pattern on Both Sides (Stickers) - Set 7720
Parts: Train |
and
* | | 3443c09pb01 Train Battery Box Car with Three Contact Holes, Red Switch Lever, Blue and Red Magnets, and Red Wheels with Hinged Doors Pattern on Both Sides (Stickers) - Set 7720
Parts: Train |
are already in the counterpart section. See
* | | 3443c03pb01 (Inv) Train Battery Box Car with Three Contact Holes, Red Switch Lever, Blue and Red Magnets, Red Wheels, and Light Gray Roof with Hinged Doors Pattern on Both Sides (Stickers) - Set 7720
Parts: Train |
and
* | | 3443c06pb01 (Inv) Train Battery Box Car with Two Contact Holes, Red Switch Lever, Blue and Red Magnets, Red Wheels, and Light Gray Roof with Hinged Doors Pattern on Both Sides (Stickers) - Set 7720
Parts: Train |
|
|
| Author: | SezaR | | Posted: | Apr 21, 2021 14:40 | | Subject: | Re: Inventory Change Request for Set 1053-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Add 2 Part 3003old Black Brick 2 x 2 without Inside Supports (match ID 7)
* Add 2 Part 3002old Black Brick 2 x 3 without Cross Supports (match ID 8)
* Add 4 Part 3003old Yellow Brick 2 x 2 without Inside Supports (match ID 9)
* Add 4 Part 3002old Yellow Brick 2 x 3 without Cross Supports (match ID 10)
* Add 4 Part 4476a Black Support 2 x 4 x 5 Stanchion Inclined, 3mm Wide Posts (match ID 11)
* Change 2 Part Black 3003 Brick 2 x 2 {Regular to Alternate} {match ID 0 to 7}
* Change 2 Part Black 3002 Brick 2 x 3 {Regular to Alternate} {match ID 0 to 8}
* Change 4 Part Yellow 3003 Brick 2 x 2 {Regular to Alternate} {match ID 0 to 9}
* Change 4 Part Yellow 3002 Brick 2 x 3 {Regular to Alternate} {match ID 0 to 10}
* Change 4 Part Black 4476b Support 2 x 4 x 5 Stanchion Inclined, 5mm Wide Posts {Regular to Alternate} {match ID 0 to 11}
|
My copy is an early version. There is date stamp on the seals as I know they
didn't print date stamp before 1987.
The stancions in my copy are
however I request to add
because the narrow versions was produced between 1983-4 and the later variant
with wide support was released in 1985. I know this based on my intense study
of train and space sets. Currently,
is the only set before 1984 having
as regular.
Note: on the instructions, the stancions printed are 4476a. There are two sets
from 1985 having stancions. The instuctions of
show
but those of
show
|
My copy was new with box opened.
|
|
|
| Author: | SezaR | | Posted: | Apr 20, 2021 03:28 | | Subject: | Re: Inventory Change Request for Set 1053-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Add 2 Part 3003old Black Brick 2 x 2 without Inside Supports (match ID 7)
* Add 2 Part 3002old Black Brick 2 x 3 without Cross Supports (match ID 8)
* Add 4 Part 3003old Yellow Brick 2 x 2 without Inside Supports (match ID 9)
* Add 4 Part 3002old Yellow Brick 2 x 3 without Cross Supports (match ID 10)
* Add 4 Part 4476a Black Support 2 x 4 x 5 Stanchion Inclined, 3mm Wide Posts (match ID 11)
* Change 2 Part Black 3003 Brick 2 x 2 {Regular to Alternate} {match ID 0 to 7}
* Change 2 Part Black 3002 Brick 2 x 3 {Regular to Alternate} {match ID 0 to 8}
* Change 4 Part Yellow 3003 Brick 2 x 2 {Regular to Alternate} {match ID 0 to 9}
* Change 4 Part Yellow 3002 Brick 2 x 3 {Regular to Alternate} {match ID 0 to 10}
* Change 4 Part Black 4476b Support 2 x 4 x 5 Stanchion Inclined, 5mm Wide Posts {Regular to Alternate} {match ID 0 to 11}
|
My copy is an early version. There is date stamp on the seals as I know they
didn't print date stamp before 1987.
The stancions in my copy are
however I request to add
because the narrow versions was produced between 1983-4 and the later variant
with wide support was released in 1985. I know this based on my intense study
of train and space sets. Currently,
is the only set before 1984 having
as regular.
Note: on the instructions, the stancions printed are 4476a. There are two sets
from 1985 having stancions. The instuctions of
show
but those of
show
|
|
| Author: | SezaR | | Posted: | Apr 20, 2021 03:22 | | Subject: | Inventory Change Request for Set 1053-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 3003old Black Brick 2 x 2 without Inside Supports (match ID 7)
* Add 2 Part 3002old Black Brick 2 x 3 without Cross Supports (match ID 8)
* Add 4 Part 3003old Yellow Brick 2 x 2 without Inside Supports (match ID 9)
* Add 4 Part 3002old Yellow Brick 2 x 3 without Cross Supports (match ID 10)
* Add 4 Part 4476a Black Support 2 x 4 x 5 Stanchion Inclined, 3mm Wide Posts (match ID 11)
* Change 2 Part Black 3003 Brick 2 x 2 {Regular to Alternate} {match ID 0 to 7}
* Change 2 Part Black 3002 Brick 2 x 3 {Regular to Alternate} {match ID 0 to 8}
* Change 4 Part Yellow 3003 Brick 2 x 2 {Regular to Alternate} {match ID 0 to 9}
* Change 4 Part Yellow 3002 Brick 2 x 3 {Regular to Alternate} {match ID 0 to 10}
* Change 4 Part Black 4476b Support 2 x 4 x 5 Stanchion Inclined, 5mm Wide Posts {Regular to Alternate} {match ID 0 to 11}
|
|
| Author: | SezaR | | Posted: | Apr 19, 2021 23:54 | | Subject: | Inventory Change Request for Set 9452-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 30 Part 3065 Trans-Clear Brick 1 x 2 without Bottom Tube (Alternate) (match ID 1)
* Change 30 Part Trans-Clear 3004 Brick 1 x 2 {match ID 0 to 1}
Comments from Submitter:
Parted out two copies and found both variations.
|
|
| Author: | SezaR | | Posted: | Apr 18, 2021 15:56 | | Subject: | Inventory Change Request for Set 9452-1 | | Viewed: | 31 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part x77a Black String & Net Cord Thin (Undetermined Length Type)
* Add 1 Part x77ac2400 Black String & Net Cord Thin 2400cm
Comments from Submitter:
Parted out a new copy.
|
|
|
| Author: | SezaR | | Posted: | Apr 16, 2021 18:38 | | Subject: | Inventory Change Request for Set 343-2 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 8 Part 27c01 Red Window 1 x 2 x 1 with Glass (Alternate) (match ID 1)
* Delete 8 Part 27 White Window 1 x 2 x 1 (Alternate) (match ID 1)
* Change 8 Part {White to Red} 27bc01 Window 1 x 2 x 1 with Extended Lip, with Glass
* Change 12 Part {White to Red} 7026bc01 Window 1 x 2 x 2 with Extended Lip, with Glass, Hole in Top
* Change 12 Part {White to Red} 7026 Window 1 x 2 x 2 with Fixed Glass (Alternate)
|
|
| Author: | SezaR | | Posted: | Apr 13, 2021 14:33 | | Subject: | Re: Set 911-1 shows incorrect turntable | | Viewed: | 24 times | | Topic: | Catalog | |
|
| This set
was released in 1976. This is the first year of production of
I know this because I have checked multiple used copies of train
and checked the production date of their motors.
Some early releases came with
while the later productions came with
It is however ppossible that some very early releases of
came with left-over
P.S. My inventory change requests for 183-1 are still under consideration since
Nov 2020:
https://www.bricklink.com/message.asp?ID=1233335
In Catalog, roguemjr writes:
| | Hello,
I was thrilled when my parts for 911-1 showed up to once again build my first
LEGO set. However, the turn table listed in the part list for this set on Brickling
is incorrect.
Current part: Item No: 3403c01 - Turntable 4 x 4 Square Base with Same Color
Turntable 4 x 4 Top (3403 / 3404)
Correct part: Item No: 3404ac01 - Turntable 4 x 4 Complete, Faceted
See attached instructions for correct part verification.
Thanks,
Michael
roguemjr
Madstone's Emporium
|
|
|
| Author: | SezaR | | Posted: | Apr 9, 2021 22:29 | | Subject: | Inventory Change Request for Set 118-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part bb0007 Black Electric, Motor 4.5V Type A 12 x 4 x 4 (match ID 1)
* Change 1 Part Black bb0007pb01 Electric, Motor 4.5V Type A 12 x 4 x 4 with '4,5 V.' (4.5 Volt) Pattern Stamped {Alternate to Regular} {match ID 1 to 0}
* Change 1 Part White x869a Electric, Train 4.5V Microphone 4 x 4 x 2 with Horizontal Plug Sockets (Alternate) {match ID 3 to 1}
* Change 1 Part White x869b Electric, Train 4.5V Microphone 4 x 4 x 2 with Vertical Plug Sockets {match ID 3 to 1}
Comments from Submitter:
We have checked many usd and few new copy. The black motor
[p=bb0007,11]
has never seen with this motor. Indeed black motor bb0007 was only produced in 1967 and used for only
|
|
| Author: | SezaR | | Posted: | Apr 9, 2021 22:25 | | Subject: | Re: Inventory Change Request for Set 116-1 | | Viewed: | 15 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 4 Part wheel1b Red Wheel Train with 2 x 2 Stud Center, Beveled Tread and Cam Axle for Motor (match ID 4)
* Delete 4 Part trainrim Light Gray Tire & Tread Train Rim for 4.5V & 12V Locomotive Wheels (match ID 3)
* Add 4 Part wheel1bc01 Red Wheel & Tire Assembly Train with 2 x 2 Stud Center, Beveled Tread and Cam Axle for Motor with Light Gray Train Rim for 4.5V & 12V Locomotive Wheels (wheel1b / trainrim) (match ID 4)
* Add 4 Part 132old Black Tire & Tread Smooth - Small (Extra)
* Delete 4 Part trainrim Black Tire & Tread Train Rim for 4.5V & 12V Locomotive Wheels (Alternate) (match ID 3)
* Delete 4 Part wheel2a Red Wheel Train Spoked for Motor (Alternate) (match ID 4)
* Add 4 Part 7039 Red Wheel Classic 4 Studs and Axle (Extra)
* Add 1 Part x466c15blue White Electric, Wire & Connector 12V / 4.5V with two Blue 2-prong connectors, 15 Studs Long (Alternate) (match ID 10)
* Add 1 Part x466c96blue White Electric, Wire & Connector 12V / 4.5V with 2 Leads, 96 Studs Long with 2 Blue Electric, Connector, 2-Way Male Rounded Narrow Type 2 with Hollow Pins (x466c96 / bb0236ac01) (Extra)
* Add 2 Part x486a Black Tire & Tread with 30 Treads Small Wedge-Shaped (Extra)
* Change 4 Part Red wheel2ac02 Wheel & Tire Assembly Train Spoked for Motor with Light Gray Train Rim for 4.5V & 12V Locomotive Wheels (wheel2a / trainrim) {Counterpart to Alternate} {match ID 0 to 4}
* Change 4 Part Red wheel2ac01 Wheel & Tire Assembly Train Spoked for Motor with Black Train Rim for 4.5V & 12V Locomotive Wheels (wheel2a / trainrim) {Counterpart to Alternate} {match ID 0 to 4}
* Change 1 Part White 996ac15blue Electric, Wire & Connector 12V / 4.5V with 2 Leads, 14 Studs Long with 4 Blue Electric, Connector, 1-Way Male Rounded with Hollow Pin (x466c14 / 996ac01) {match ID 0 to 10}
|
The later version of this set came with extra parts for building other mocks
with motor, like all other train sets such as
these parts are those coming with set
See also this Ebay auction of a later release that appears to be in new condition
353441088805
This set came in many variations. Therre is a nice photo of comparison on peeron
. com
http://www.peeron.com/inv/sets/116-1?showpic=10957
|
|
| Author: | SezaR | | Posted: | Apr 9, 2021 22:22 | | Subject: | Inventory Change Request for Set 116-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 4 Part wheel1b Red Wheel Train with 2 x 2 Stud Center, Beveled Tread and Cam Axle for Motor (match ID 4)
* Delete 4 Part trainrim Light Gray Tire & Tread Train Rim for 4.5V & 12V Locomotive Wheels (match ID 3)
* Add 4 Part wheel1bc01 Red Wheel & Tire Assembly Train with 2 x 2 Stud Center, Beveled Tread and Cam Axle for Motor with Light Gray Train Rim for 4.5V & 12V Locomotive Wheels (wheel1b / trainrim) (match ID 4)
* Add 4 Part 132old Black Tire & Tread Smooth - Small (Extra)
* Delete 4 Part trainrim Black Tire & Tread Train Rim for 4.5V & 12V Locomotive Wheels (Alternate) (match ID 3)
* Delete 4 Part wheel2a Red Wheel Train Spoked for Motor (Alternate) (match ID 4)
* Add 4 Part 7039 Red Wheel Classic 4 Studs and Axle (Extra)
* Add 1 Part x466c15blue White Electric, Wire & Connector 12V / 4.5V with two Blue 2-prong connectors, 15 Studs Long (Alternate) (match ID 10)
* Add 1 Part x466c96blue White Electric, Wire & Connector 12V / 4.5V with 2 Leads, 96 Studs Long with 2 Blue Electric, Connector, 2-Way Male Rounded Narrow Type 2 with Hollow Pins (x466c96 / bb0236ac01) (Extra)
* Add 2 Part x486a Black Tire & Tread with 30 Treads Small Wedge-Shaped (Extra)
* Change 4 Part Red wheel2ac02 Wheel & Tire Assembly Train Spoked for Motor with Light Gray Train Rim for 4.5V & 12V Locomotive Wheels (wheel2a / trainrim) {Counterpart to Alternate} {match ID 0 to 4}
* Change 4 Part Red wheel2ac01 Wheel & Tire Assembly Train Spoked for Motor with Black Train Rim for 4.5V & 12V Locomotive Wheels (wheel2a / trainrim) {Counterpart to Alternate} {match ID 0 to 4}
* Change 1 Part White 996ac15blue Electric, Wire & Connector 12V / 4.5V with 2 Leads, 14 Studs Long with 4 Blue Electric, Connector, 1-Way Male Rounded with Hollow Pin (x466c14 / 996ac01) {match ID 0 to 10}
|
|
| Author: | SezaR | | Posted: | Apr 9, 2021 21:13 | | Subject: | Re: Inventory Change Request for Set 9452-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Add 15 Part 3065 Trans-Clear Brick 1 x 2 without Bottom Tube (Alternate) (match ID 1)
* Add 12 Part 3626bp01 Yellow Minifigure, Head Standard Grin Pattern - Blocked Open Stud (Alternate) (match ID 2)
* Change 30 Part Trans-Clear 3004 Brick 1 x 2 {match ID 0 to 1}
* Change 12 Part Yellow 3626ap01 Minifigure, Head Standard Grin Pattern - Solid Stud {match ID 0 to 2}
|
I parted out one set AND had, in adittion, some extra sealed bags.
There were 30
and 15
The extra sealed bags were sold in an auction I won. The other sealed bags were
sold in another auction(s).
There were 12 minifigs heads, a mixture of
and
[p=3626bp01,3]
I do not know how to check the length of
It is wrapped around a white cardboard.
|
|
| Author: | SezaR | | Posted: | Apr 9, 2021 21:09 | | Subject: | Inventory Change Request for Set 9452-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 15 Part 3065 Trans-Clear Brick 1 x 2 without Bottom Tube (Alternate) (match ID 1)
* Add 12 Part 3626bp01 Yellow Minifigure, Head Standard Grin Pattern - Blocked Open Stud (Alternate) (match ID 2)
* Change 30 Part Trans-Clear 3004 Brick 1 x 2 {match ID 0 to 1}
* Change 12 Part Yellow 3626ap01 Minifigure, Head Standard Grin Pattern - Solid Stud {match ID 0 to 2}
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
Canada, British Columbia
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
