Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | jennnifer | Posted: | Mar 19, 2020 11:49 | Subject: | Re: Will someone inventoryJurassic park 75936 set | Viewed: | 54 times | Topic: | Inventories | |
|
| In Inventories, Legobuying84 writes:
| Now that Lego owns bricklink can I request this set be inventoried and it will
get done? I’m wanting to part out 5-10 of them and have been checking for months
but it hasn’t been inventoried. I don’t know if I need to offer someone $20 to
inventory it or what to do so that’s why I’m here posting
|
All finished! The admins approved in less than 12 hours by the way.
Good luck with the part out! There are lots of great parts in this set.
Jen
|
|
Author: | jennnifer | Posted: | Mar 18, 2020 10:45 | Subject: | Re: Decorated categories | Viewed: | 33 times | Topic: | Suggestions | |
|
| In Suggestions, athornberg writes:
| Replace "decorated" categories with 2 new categories, "printed" and "with stickers".
|
You can achieve much the same thing by searching -sticker in the decorated category.
Jen
|
|
Author: | jennnifer | Posted: | Mar 16, 2020 11:57 | Subject: | Re: Will someone inventoryJurassic park 75936 set | Viewed: | 49 times | Topic: | Inventories | |
|
| In Inventories, Legobuying84 writes:
| that one of the requirements would be to make sure inventories are always done.
But anyways all I’m asking for is if someone had time and wanted $20 to do it
then great. If no one wants to do it then I would offer 30$ etc. That being said
even if you do it and I pay you there is no guarantee the admin staff will even
approve it. That’s just the risk I have to take.
|
?? There is no risk whatsoever. Admin approve all set inventories that are correct.
And they help submitters to make an inventory correct. I am not sure where you
are coming from in all this. Give me a couple days to complete the inventory
and you will see that the system works just fine.
Jen
|
|
Author: | jennnifer | Posted: | Mar 16, 2020 10:22 | Subject: | Re: Will someone inventoryJurassic park 75936 set | Viewed: | 65 times | Topic: | Inventories | |
|
| In Inventories, Legobuying84 writes:
| In Inventories, axaday writes:
| It sounds like Jenn may be doing it. If not, I would take the $100 bounty. It
would take me a week. I don’t have a local Lego store.
In Inventories, Legobuying84 writes:
| In Inventories, Admin_Russell writes:
| In Inventories, Legobuying84 writes:
| In Inventories, jennnifer writes:
| In Inventories, Legobuying84 writes:
| Now that Lego owns bricklink can I request this set be inventoried and it will
get done? I’m wanting to part out 5-10 of them and have been checking for months
but it hasn’t been inventoried. I don’t know if I need to offer someone $20 to
inventory it or what to do so that’s why I’m here posting
|
Funny, I have this set in a sealed box just right here staring at me. Guess I
could dust off some cobwebs on my inventory skills...
Jen
|
I figured by now it would be pretty instant for inventories to get listed with
lego now owning this site. I’m hoping this site isn’t still using volunteers
to do inventory
|
I wondering what your thought process is on this subject. What does the recent
acquisition have to do with the speed at which inventories are completed on BrickLink?
|
My thought process is that the Lego Group owns bricklink and could potentially
instantly upload all inventories of sets that are released. You from what I understand
are now employed by Lego so I assume you would know more about what the capabilities
are.
But maybe it’s just going to take some cash to fix the situation. Maybe I need
to offer 40$ or 100$ for someone to inventory the set. You can call it a side
job or a bounty or something along those lines. I had thought that the Lego group
would have helped in this area but I guess inventories still rely on volunteers.
I really have no clue but I’m willing to pay someone to do it if someone wants
to make some cash.
|
|
Well I would obviously see what’s the lowest price I can get it done for. Hopefully
20$ or 40$. Even still I realize that I would have to wait for an admin to approve
it. I’m just trying to help myself and the community. I’m
Not looking for a debate or argument
|
Sorry you feel so negative about all this. Our system works with volunteers and
the LEGO group could not provide all the necessary info for a good inventory.
Just look at the differences between our inventories and Brickset's if you
need some examples. No pattern names, no minifigs, no part variations, no sticker
sheets, no extras. Anyway, you posted that you needed an inventory and someone
offered to do it. How bad can things be?
Take care,
Jen
|
|
Author: | jennnifer | Posted: | Mar 15, 2020 13:08 | Subject: | Re: Will someone inventoryJurassic park 75936 set | Viewed: | 73 times | Topic: | Inventories | |
|
| In Inventories, Legobuying84 writes:
| Now that Lego owns bricklink can I request this set be inventoried and it will
get done? I’m wanting to part out 5-10 of them and have been checking for months
but it hasn’t been inventoried. I don’t know if I need to offer someone $20 to
inventory it or what to do so that’s why I’m here posting
|
Funny, I have this set in a sealed box just right here staring at me. Guess I
could dust off some cobwebs on my inventory skills...
Jen
|
|
Author: | jennnifer | Posted: | Feb 7, 2020 15:10 | Subject: | Re: February Roadmap Project: Old and New | Viewed: | 82 times | Topic: | Catalog | |
|
| Sure! I'll play along...
I am not convinced that 90460 is really a new version of 6131.
They look the same and LEGO uses the same thumbnail image for both. The small
image in Dark Green that I submitted for 90460 was back in the days before I
knew what I was doing. I cannot confirm the part number or what set it was from.
(I guess we all start somewhere!)
Anyway, I would like to see convincing side by side proof that they are significantly
different even if they have different mold numbers. I have not found any molded
with 90460. My Witch from Series 2 has been played with so I cannot confirm it
there either.
I am open to hearing any ideas or missing information about this!
Thanks,
Jen
|
|
Author: | jennnifer | Posted: | Feb 3, 2020 18:36 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 86 times | Topic: | Catalog | |
|
| A very warm Welcome Back! I look forward to many pleasant discussions, disagreements,
and collaborations.
Jen
|
|
Author: | jennnifer | Posted: | Feb 2, 2020 11:04 | Subject: | Re: Feature which shows if BL member is active | Viewed: | 45 times | Topic: | Suggestions | |
|
| In Suggestions, yapke writes:
| Hello,
I was wondering if a feature or timer, to see whether a BrickLink
member is active or has been active (like on FB messenger or WhatsApp), would
be a great idea.
The reason why I'm wondering:
I'm sure there are members who logs in daily to see if another
member has reacted to their order('s invoice)/message, and are nervously
waiting until he/she/they react(s).
It will also be handy to see if a member (who placed an order on your store)
is active on BL and isn't responding to your multiple messages (or just ignoring),
and easier to decide to cancel an order.
For example (my example):
There is a member (USA) who has placed an order on my store (Belgium) a few days
ago. I instantly filled in and sent the invoice to serve him and be able to send
the parcel (after payment) as quickly as possible. But until now, two days later,
he hasn't read the message nor has paid for the order. Now I'm just wondering
if he was active or not lately... cause the hole situation is making me nervous.
I know I should be patient... but I find it kind of weird he responded very quickly
to my last call for buying, and afterwards not responding anymore.
So if you recognize yourself in such a situation, maybe vote 'YES' and
perhaps selling on BL will be more pleasant and more serious. I'm sure there
is a lot of members thinking this way, isn't it?
Kindly greetings,
Yapke
|
Yes, we used to have the ability to see when a buyer had last logged on. This
feature was just removed last month due to 'privacy' issues. It's
unfortunate as it was a valuable tool for sellers. Hopefully, they find a way
to restore it soon.
Jen
|
|
Author: | jennnifer | Posted: | Jan 26, 2020 00:25 | Subject: | Re: Have A Heart | Viewed: | 58 times | Topic: | Catalog | |
|
| In General, randyf writes:
|
I will definitely be looking into Azul and Wingspan. We are always looking for
other great games to add to our pool to choose from. Thanks for the suggestions!
Cheers,
Randy
|
Another vote here for Azul and Wingspan. We also play a lot of Scythe, Terraforming
Mars, and Tapestry recently.
Carcassone, Agricola, and Belfort are my all time favorites. I can't play
Catan... dice don't like me.
Jen
|
|
Author: | jennnifer | Posted: | Jan 15, 2020 10:42 | Subject: | Re: Multipacks as one inventory item? | Viewed: | 30 times | Topic: | Catalog | |
|
| In Catalog, chetzler writes:
|
Any possibility we could get a "break multipacks into parts" option on the part
out screen? Sort of like the "Break Sets in Sets" option that currently exists
and is very useful for things like Advent calendars.
|
That would be ideal but would require actual programming to put into place. Any
programmers work at this website?? Oh, never mind.
Jen
|
|
Author: | jennnifer | Posted: | Jan 12, 2020 13:31 | Subject: | Re: Set 75248 Inventory Awareness | Viewed: | 63 times | Topic: | Inventories | |
|
| In Inventories, 62Bricks writes:
| Bricklink set inventories are not based on the building instructions at all.
The printed parts list is the only thing that matters. It is a widespread misunderstanding
that the regular section of the inventory lists the parts needed to complete
the set according to the instructions.
|
Wow, this is a pretty bold incorrect assertion. I was an inventory admin for
three years. The building instructions are the ultimate source for accurate inventories.
Not every set follows every rule, but that is where everything starts.
Jen
|
|
Author: | jennnifer | Posted: | Dec 16, 2019 23:02 | Subject: | Re: Inventory Change Request for Minifig sw1030 | Viewed: | 28 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
|
Like I said before, the system *as it is* handles the overwhelming majority of
figures with absolutely no problems (I would put it at greater than 95% for sure).
I don't see why we need to tear down the entire structure and begin from
scratch on creating a system that MAY include 100% of figures when the *massive*
amount of work required for this from a *volunteer* team would far outweigh any
added benefits of making the last few percentage points of figures fit into said
system. The math just does not make sense.
Cheers,
Randy
|
I am totally with you here Randy. Our system isn't perfect, but it is stable,
and LEGO makes constant changes so not everything fits exactly. Of course there
is always room for improvement, but system-wide changes are not necessarily needed
to correct small historical inconsistencies. It is very disruptive for sellers
to have listings, categories, and inventories updated.
Just my two cents as a seller and contributor. Thanks to all who help maintain
and improve the unique resource we have here!
Jen
|
|
Author: | jennnifer | Posted: | Nov 8, 2019 09:36 | Subject: | Re: Forum Reforms | Viewed: | 46 times | Topic: | Suggestions | |
|
| In Suggestions, bje writes:
| The captain has therefor cordially invited you to dine at the ship's main
table once it is upright and our onboard chef can manage to cook you dodo a la
efof.
Regards
Paid for by Pals Tours
|
Excellent. You brightened my morning considerably.
Jen
|
|
Author: | jennnifer | Posted: | Nov 8, 2019 01:13 | Subject: | Re: Forum Reforms | Viewed: | 73 times | Topic: | Suggestions | |
|
| In Suggestions, Nathan123 writes:
| It seems the forum isn't getting the same kind of community involvement as
it once did. It is fairly common to see less than 100 messages per day and I
had to go back to July to find a day that had over 200.
|
I love the way this old Forum works. Sorry if I am in the minority. I would argue
that the lack of community involvement is directly related to the management's
antipathy.
Jen
|
|
Author: | jennnifer | Posted: | Oct 16, 2019 09:45 | Subject: | Re: ADD NEW MINIFIG | Viewed: | 56 times | Topic: | Inventories | |
|
| In Inventories, StoreToys4Boys writes:
| 30 minutes i'm trying to add a new minifig and can't do it.
I want to create a new one ans start in the reserve minifig and got the answer
"Item Not Found in Catalog "
I understand why people get discourage by adding stuff.
Instructions to add are done really in general and find nothing to help.
I'm giving up .
|
That's too bad. The catalog Add or Change pages are very specific out of
necessity. If you are trying to reserve an item, you are already to the inventory
section. All you need to do to add a new minifig is go to the Catalog Add or
Change tab and then click Add Item: -Minifig. Then, it gets much more complicated!
People here will answer questions so don't struggle with any one step too
long.
Good luck,
Jen
|
|
Author: | jennnifer | Posted: | Sep 13, 2019 09:33 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 151 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
|
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
|
Sorry, but I must say that I take offense at this statement. You are passing
judgement on the previous admins and their reasons for leaving the site. You
are implying that the 'correct' attitude would be to maintain one's
dedication to a site even after you may have had a bad experience.
You don't know how they were treated by the management and members of this
site.
Jen
|
|
Author: | jennnifer | Posted: | Aug 12, 2019 09:45 | Subject: | Re: having trouble clicking on pictures of items | Viewed: | 32 times | Topic: | Catalog | |
|
| In Catalog, jjoosephhh writes:
| when i try to click on a image to look at it and know what characters are in
the set it doesn't allow me to.. Does anyone else have this problem?? more
context images in the catalog or thumbnail
|
https://www.bricklink.com/message.asp?ID=1152248
|
Author: | jennnifer | Posted: | Aug 9, 2019 18:12 | Subject: | Re: Why can't I enlarge pics anymore? | Viewed: | 45 times | Topic: | Catalog | |
|
| In Catalog, calsbricks writes:
|
Tried it here on w7 ie11 - no problems whatsoever. Sounds like it could be womething
at your end. Which broiwsers have you tried?
|
I get no large (pop up) images on Windows 7 with IE11. The thumbnail images are
no longer live links.
Jen
|
|
Author: | jennnifer | Posted: | Aug 9, 2019 18:05 | Subject: | Re: Why can't I enlarge pics anymore? | Viewed: | 45 times | Topic: | Catalog | |
|
| In Catalog, firestar246 writes:
| So you used to be able to click on the picture of a piece in the catalog, sort
of a quick view. You'd see the years it was made, any sets/minifigures the
piece was in, etc. You all know what I'm talking about. Well, a few days
ago I couldn't do it anymore. I've tried three different devices.
Why would they make such a horrible change for? I rely on that heavily when listing
minifigure parts to make sure I have the correct listing. This is going to make
this job twice as long now.
|
I have the same bug. It is not just you. Windows 7: Firefox, Chrome, etc. Logged
in, logged out, doesn't matter.
Jen
|
|
Author: | jennnifer | Posted: | Jul 30, 2019 00:08 | Subject: | Re: Pattern spelt wrong | Viewed: | 46 times | Topic: | Catalog | |
|
| In Catalog, talltim writes:
This struck me as funny as 'spelt' looks like it is spelled wrong to
me.
Had to look it up...
Jen
|
|
Author: | jennnifer | Posted: | Jul 1, 2019 11:21 | Subject: | Re: 10205 : Parts to be removed from Inventory | Viewed: | 56 times | Topic: | Inventories | |
|
| In Inventories, Sango85 writes:
| Hello,
I check my locomotive 10205 with Bricklink Inventory and I found differences...
I bought a new loco, and found the same differences...
I think there are errors into the Bricklink Inventory.
Please find the list of the issues.
Best regards,
Julien
|
You might want to try explaining exactly what the 'differences' are.
Your list is not descriptive enough. If you are confident of your corrections,
you should file a change request for the inventory here:
https://www.bricklink.com/catalogAdd.asp?utm_content=subnav
Good luck,
Jen
|
|
Author: | jennnifer | Posted: | Jun 2, 2019 14:32 | Subject: | Re: Inventory Change Request for Set 70657-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
|
Multiple video reviews of the set show the Reddish Brown versions, which were
probably included in earlier releases of the set.
Cheers,
Randy
|
Thanks for checking!
Jen
|
|
Author: | jennnifer | Posted: | Jun 2, 2019 13:42 | Subject: | Inventory Change Request for Set 70657-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 61287pb006 Dark Tan Cylinder Hemisphere 2 x 2 with Cutout with Europe, Africa, Asia, Australia Dark Brown Globe Pattern (Alternate) (match ID 2)
* Add 1 Part 61287pb005 Dark Tan Cylinder Hemisphere 2 x 2 with Cutout with the Americas and South Pacific Dark Brown Globe Pattern (Alternate) (match ID 3)
* Add 1 Part 61287c01pb04 Dark Tan Cylinder Hemisphere 2 x 2 with Dark Brown Globe Pattern (Counterpart)
* Change 1 Part Dark Tan 61287pb002 Cylinder Hemisphere 2 x 2 with Cutout with Europe, Africa, Asia, Australia Reddish Brown Globe Pattern {match ID 0 to 2}
* Change 1 Part Dark Tan 61287pb001 Cylinder Hemisphere 2 x 2 with Cutout with the Americas and South Pacific Reddish Brown Globe Pattern {match ID 0 to 3}
Comments from Submitter:
Adding as an alternate but the original inventory should probably be reconfirmed.
|
|
Author: | jennnifer | Posted: | Apr 17, 2019 09:29 | Subject: | Re: Lengths in “L” and 18654 | Viewed: | 32 times | Topic: | Catalog | |
|
| In Catalog, randyf writes:
| My point was that if you categorize it as a bushing, you don't need to worry
about the length of it at all. You don't see the axle bushing above listed
as a "Technic Bush 1L". It is just "Technic Bush". So change that one to "Technic
Axle Bush" and
to "Technic Pin Bush" and problem solved. No need to worry about the length at
all. Like I said, it doesn't and can't connect pins or axles at all,
so it is definitely *not* a "Technic, Pin Connector". And that's a fact.
|
I submitted changes along this train of thought long ago but they were not approved.
It is a 1x1 Liftarm in actuality but functions only as a bushing. I support moving
it to a more appropriate category.
Jen
|
|
Author: | jennnifer | Posted: | Mar 22, 2019 09:37 | Subject: | Re: Inventory Change Request for Set 70840-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| |
|
Author: | jennnifer | Posted: | Mar 19, 2019 09:53 | Subject: | Re: 1st time i've inventoried a minifig - help! | Viewed: | 44 times | Topic: | Catalog | |
|
| In Catalog, slave2lego writes:
| Hi, i'm trying to inventory a minifig (sc074) but the inventory page only
has 1 line and I cant work out how to add extra lines for each of the parts?
Also can somone breakdown the torso numbering convention as well?
|
Standard torsos all start with:
973 (base part number used here on BrickLink)
pb (abbreviation for a part with a decoration)
xxxx (current number available)
c (abbreviation for a part that is an assembly)
01 (current number available for this assembly)
So, a completely new torso will be: 973pbxxxxc01
To find the next available number, do a Catalog (NOT All Items) search for 973pb*
then sort by Date, Order: Down
https://www.bricklink.com/catalogList.asp?pg=1&q=973pb%2A&catLike=W&sortBy=I&sortAsc=D&itemBrand=1000&v=1
Looks like 3472 was just used. I checked the Approval Pending Overview and 3473
and 3474 are Pending, so list yours as: 973pb3475c01
Jen
|
|
Author: | jennnifer | Posted: | Mar 19, 2019 09:45 | Subject: | Re: 1st time i've inventoried a minifig - help! | Viewed: | 40 times | Topic: | Catalog | |
|
| In Catalog, slave2lego writes:
| Hi, i'm trying to inventory a minifig (sc074) but the inventory page only
has 1 line and I cant work out how to add extra lines for each of the parts?
|
It looks like you already submitted the inventory with just the legs. That is
okay. You can still edit your Pending inventory. Click Market, Add or Change,
New Inventories. That should take you to a page where you can edit.
Jen
|
Also can somone breakdown the torso numbering convention as well?
Cheers
|
|
|
Author: | jennnifer | Posted: | Mar 16, 2019 09:11 | Subject: | Re: Search for multiple items ? | Viewed: | 21 times | Topic: | Suggestions | |
|
| In Suggestions, Brickwilbo writes:
It has always fascinated me that one the core functionalities of this site is
so often overlooked. How many times has a new (or not at all new) member come
to the Forum to ask for this very thing? They shouldn't have to!
How hard would it be a include elements in pages to educate users on the best
shopping and searching methods? Microsoft used to do it with a big animated paperclip.
lol
Jen
|
|
Author: | jennnifer | Posted: | Mar 16, 2019 09:06 | Subject: | Re: Inventory Change Request for Set 31072-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Fran_ writes:
| Please make changes to the following inventory:
* Delete 1 Part 4282 Light Bluish Gray Plate 2 x 16 (Extra)
Comments from Submitter:
There is no 4282 (2x16 plate) extra item. I just opened a new set; in addition, this kind of item is (almost?) never present as an extra in sets of this size.
|
Hello,
I am sure the admins will repost their policy about Extras for you. However,
I will just quickly let you know that extras vary by region and that it is very
common to find a large part such as this as an extra in a small set in the US
market. Any items that come loose in the box frequently include an extra.
Jen
|
|
Author: | jennnifer | Posted: | Mar 13, 2019 19:53 | Subject: | Re: Search for parts without dimensions | Viewed: | 25 times | Topic: | Suggestions | |
|
| In Suggestions, Etown writes:
I would like to go back to the beginning of this thread point out that I was
just trying to add information where there was confusion, that I do not use or
have a working knowledge of the Instant Checkout system nor am I defending it,
that my knowledge is limited to the Catalog only (which I know a great deal about,)
and that I am sorry for causing any trouble.
Good luck all at working out these issues!
Out...
Jen
|
|
Author: | jennnifer | Posted: | Mar 13, 2019 09:26 | Subject: | Re: Search for parts without dimensions | Viewed: | 29 times | Topic: | Suggestions | |
|
| In Suggestions, Etown writes:
| I was just coming to suggest this very thing. Before I did though I checked,
and no, there is no such box. That would probably be one of those "inventory
management tools" that were promised years ago but have yet to materialise.
|
|
|
|
Author: | jennnifer | Posted: | Mar 12, 2019 09:56 | Subject: | Re: Search for parts without dimensions | Viewed: | 34 times | Topic: | Suggestions | |
|
| In Suggestions, SchmickBricks writes:
|
No, that doesn't help at all. Why can't sellers have an option to search
their inventory for items without dimensions so we can add our own? Unfortunately
there are a lot of items in the catalogue without dimensions that have been set
by default as weight bound rather than volume bound that can't (In Australia
at least) be sent as a large letter as they will exceed the 20mm maximum thickness.
This wasn't as big an issue in the past, but now with instant checkout it
is. Why should it matter if an item does or doesn't fit within the normal
stud/brick height system? Surely the main purpose of dimensions is for calculating
postage costs?
It's not that difficult to pull out a ruler or tape measure and measure
something. I'm happy to do it myself to my own inventory, just give me the
option to search for items that don't have catalogue dimensions like we can
for items without weight.
|
First, I didn't make this system and I would certainly NEVER defend it.
I was just trying to explain some the details.
Second, you can absolutely look up parts missing shipping dimensions in your
inventory. I don't use Instant Checkout, but I believe there is a checkbox
for Instant Checkout Unavailable on your My Inventory page.
Your original post seemed to be asking about item dimensions which are not the
same thing.
|
|
Author: | jennnifer | Posted: | Mar 12, 2019 09:50 | Subject: | Re: Search for parts without dimensions | Viewed: | 31 times | Topic: | Suggestions | |
|
| In Suggestions, cosmicray writes:
| This is one of the incongruities of BrickLink. Dimensions are measured in studs
(system or duplo) in the Catalog, but the override fields below a lot entry are
in millimeters.
For example, a Duplo Brick 2600 shows on the catalog page as "Size: 2 x 6 x 1
in studs", but underneath a listed lot it is …
DimX(mm): 96mm
DimY(mm): 23.6mm
DimZ: (mm) 32mm
(and yes, the semi-colon is used inconsistently there)
I do not wish that we entered by studs for manual overrides, but it's clear
to me that the system is converting from one to another for the benefit of IC.
It's also clear that you can override any part to any set of dimensions if
you wanted to.
Nita Rae
|
The incongruity exists because BL has not yet decided to implement the newer
shipping data within the existing catalog structure and database.
Each part has a data field in the catalog for Item Dimensions (listed on each
catalog page as Size.) This is measured approximately in studs / brick height.
The data is supplied by members and is maintained by the Catalog Admin though
the forms on the Add or Change tab.
The newer shipping dimensions data was put in place along with Instant Checkout.
This data is only in mm. The data is not visible except on the My Inventory and
Order Detail pages. The data is maintained by the staff at BrickLink and is submitted
by members on a thread here in the Forum. I believe they originally calculated
many of their measurements from the catalog Item Dimensions data. They have not
maintained consistency in which measurements are X, Y, or Z, or how precise measurements
must be. However, you can change the data for each part in your own shop from
your Inventory detail page.
Hope that helps,
Jen
|
|
Author: | jennnifer | Posted: | Mar 11, 2019 14:32 | Subject: | Re: Search for parts without dimensions | Viewed: | 43 times | Topic: | Suggestions | |
|
| In Suggestions, SchmickBricks writes:
| Can we please have an option to search our inventory for items without dimensions
in the catalogue? There is already an option to search for items without a catalogue
weight or items that won't work with instant checkout, but it won't help
with finding items that are set as weight bound by default with no dimensions
(Curved train track, some rollercoaster track) which are potentially too big
to send in a letter.
Prohibiting new sets from being inventoried without all the parts having weights
and dimensions would be a big help too, providing users don't add arbitrary
values which seems to be the case for 99% of instruction books at the moment.
|
There are more than 20,000 items in the catalog without dimensions. Catalog dimensions
are only added when the item fits within the normal stud/brick height system.
https://www.bricklink.com/catalogList.asp?v=3&itemDim=0
1x1 brick: dimensions are 1x1x1 in studs
minifig torso: ?
If it can't be reasonably measured in studs vs brick height, a part will
have no data at all.
Hope that helps,
Jen
|
|
Author: | jennnifer | Posted: | Mar 7, 2019 16:47 | Subject: | Update requested | Viewed: | 138 times | Topic: | Catalog | Status: | Open | |
|
| So, what is the status of the new Catalog Admin search? Things are backing up... |
|
Author: | jennnifer | Posted: | Jan 29, 2019 08:55 | Subject: | Re: Hair image incorrect | Viewed: | 33 times | Topic: | Catalog | |
|
| In Suggestions, mroppoli writes:
| 92256 black image incorrect
|
You don't think these are the correct images? Just curious...
https://brickset.com/parts/design-18636
Jen
|
|
Author: | jennnifer | Posted: | Jan 28, 2019 09:31 | Subject: | Re: Inventory Change Request for Set 10704-1 | Viewed: | 28 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Miketuk writes:
| Please make changes to the following inventory:
* Delete 1 Part 2412b Flat Silver Tile, Modified 1 x 2 Grille with Bottom Groove / Lip (Extra)
Comments from Submitter:
This set doesn't contain extra 2412b in flat silver. I parted out 100 copies incl. extras and I find out, that I am 100 pieces of this part short now.
|
It is unfortunate you were caught short of these parts. I have heard this argument
so many times that it is indeed frustrating! However, the part out process has
a 'This part may or may not appear in your set' warning on every single
extra line item. Not sure why sellers would ignore this kind of warning?
Best of luck,
Jen
|
|
Author: | jennnifer | Posted: | Jan 25, 2019 10:17 | Subject: | Re: Difference between sw0993 & sw0530 | Viewed: | 48 times | Topic: | Catalog Requests | |
|
| Bump!
In Catalog, Stellar writes:
| What is the difference between these two?
[m=sw0993]
Thanks
|
|
|
Author: | jennnifer | Posted: | Jan 24, 2019 15:33 | Subject: | Re: Set weight variance | Viewed: | 35 times | Topic: | Catalog | |
|
| In Catalog, kuschelig writes:
|
Could the package weight be different depending on country? (an inventory is
submitted by someone in EU and their packaging weighs less??)
|
There is absolutely a 10-25% difference in the weight of most sets between the
North American and worldwide markets. The difference is the weight of the paper
for the box and instructions and also the different paper size for the instructions.
I kept data on this for years and compared hundreds of sets. A significant portion
of the sets, boxes, and instructions on BrickLink would need to have two separate
weights in order to be accurate for everyone.
You can always set your own weight for items listed in your shop.
Hope that helps!
Jen
|
|
Author: | jennnifer | Posted: | Jan 22, 2019 13:08 | Subject: | Re: Difference between sw0993 & sw0530 | Viewed: | 81 times | Topic: | Catalog | |
|
| In Catalog, grimsbricksuk writes:
| Printing on the new body part is vastly improved over the original minifig, that
together with the new pcc justified a new minifig entry in the catalog.
|
I believe that if this were the case, there would be many, many more nearly similar
parts in our catalog.
Sellers have to be able to identify which part they have in hand with no more
then the text and image for reference. There needs to be some detail that isn't
subjective.
Jen
|
In Catalog, Stellar writes:
| What is the difference between these two?
[m=sw0993]
Thanks
|
|
|
|
Author: | jennnifer | Posted: | Jan 21, 2019 10:01 | Subject: | Re: Catalog: Sets: Ninjago: 30534-1 Ninja Workout | Viewed: | 25 times | Topic: | Catalog | |
|
| In Catalog Requests, mylego4all writes:
| Hello,
This item was entered in by Hygrotus added this item to the catalog on Dec 25,
2018, and is still PENDING APPROVAL.
Do you know how long it takes for approval. I have some of these I would like
to put up for sale.
Thanks
|
I would suggest submitting an image. New items need an image for approval.
https://www.bricklink.com/v2/catalog/catalogImageAdd.page?itemType=S
Jen
|
|
Author: | jennnifer | Posted: | Jan 15, 2019 00:38 | Subject: | Re: Cancel change requests. | Viewed: | 33 times | Topic: | Catalog Requests | |
|
| In Catalog Requests, mcmit writes:
| Please ignore /cancel my change requests to 10865 and 10895
I entered the wrong set number the first time and I made a error on the width
of 10895 details, regardless of that the details already submitted for 10895
correspond closely with the ones I entered.
|
You can cancel Pending Requests from your My Activity page:
https://www.bricklink.com/myActivity.asp?utm_content=subnav
Jen
|
Author: | jennnifer | Posted: | Jan 14, 2019 16:23 | Subject: | Re: Complete set of Unikitty CMFs? | Viewed: | 39 times | Topic: | Catalog | |
|
| In Catalog, leopard37 writes:
I am also very happy to see a listing like this added to the catalog! I know
it is against custom but very useful for buyers and sellers.
Jen
|
Author: | jennnifer | Posted: | Dec 30, 2018 12:29 | Subject: | Re: Inventory Change Request for Set 75210-1 | Viewed: | 41 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Dino1 writes:
| Where is the picture as proof?
|
Sorry if I have misunderstood, but it's weird that you would question the
addition of a part that is routinely included as an Extra submitted by a highly
reliable source. Unless there is something else here I am missing?
Have a good day,
Jen
|
|
Author: | jennnifer | Posted: | Dec 12, 2018 15:23 | Subject: | Re: Stickered Parts separate category | Viewed: | 41 times | Topic: | Suggestions | |
|
| In Catalog Requests, brickphils writes:
| Hi,
Pls create separate category for stickered parts so that we dont have to go through
them when we are browsing items only with decorated/printed ones.
Thanks.
|
While you are waiting for this suggestion, I recommend adding:
-sticker -stickers
to your search or any category you are browsing.
Good luck,
Jen
|
|
Author: | jennnifer | Posted: | Nov 23, 2018 11:16 | Subject: | Re: Seventh Catalog Project Underway | Viewed: | 45 times | Topic: | Catalog | |
|
| Hello,
Here are my initial thoughts on this subject. There are several reasons that
I like the current system of using set numbers on minifigs.
1) I think a minifig that only appears in one set should have a set number. I
would be willing to go as high as 3 set numbers in the Name before I feel it
would be annoying. It is useful for searches and anything useful should not be
easily discarded.
2) When a new minifig is added to the catalog and before the set it appears in
is inventoried and approved, the only way you can find it is with its name or
the set number in the title. It would not yet have the link for 'Item Appears
In.' This is the most important reason to keep the number.
3) Brickset links to our minifigs in searches, but only if the set number is
in the Name description:
https://brickset.com/search?query=40108&scope=All
https://brickset.com/minifigs/twn215/balloon-vendor-(40108)
Nice to know the only listing to buy this minifig is on BrickLink! That's
good (free) advertising.
I do also think that adding some more descriptors would be nice on some figs.
Jen
|
|
Author: | jennnifer | Posted: | Nov 12, 2018 10:11 | Subject: | Re: Fourth Catalog Project Underway | Viewed: | 54 times | Topic: | Catalog | |
|
| In Catalog, mfav writes:
|
I'm not suggesting this is currently a problem, but it does pose issues when
one comes to implementing features such as Jen suggests.
|
You keep coming back to and picking apart this idea? Please consider:
1) This idea has been asked for from the original BrickLink session in Seattle
more years ago then I would like to count up.
2) It would be a convenience to many users (and especially newbies) to be able
to further constrain their search results. "I am tying to find something, but
there are too many stickered parts in the way" has been stated numerous times
in the Forum over the years.
3) I do not believe that it would be complicated, difficult to implement, or
require touching the database. Each checkbox would simply add the necessary text
string '-pattern' '-sticker' to the search parameters. I have
spoken to people more knowledgeable than me who have assured me this is a real
thing.
4) It could appear within the search bar at the top of any catalog search results
page. One checkbox to Hide Decorated parts. One checkbox to Hide Stickers. The
new page designs are already likely wide enough to accommodate this. Try it searching
for 'tile 1x6' and then 'tile 1x6 -sticker' to get a feel for
how it might function when someone is looking for a part. Then, try 'legs
hips' and 'legs hips -pattern'
5) There would be less pressure on the admins to split some categories if these
options were easily available to everyone. Splits are still needed and necessary,
but I will restate that this would simply alleviate some of the pressure to do
so.
I admit that I do not really understand where you are coming from with these
last few posts discussing my little afterthought suggestion. It is not feeling
like a discussion much from my end so I am going to say thanks now for adding
your comments and that this is the last I have to say on the matter. I look forward
to this discussion heading back toward catalog issues and not coding for the
site which BL is not currently considering.
Take care!
Jen
|
|
Author: | jennnifer | Posted: | Nov 10, 2018 13:41 | Subject: | Re: Fourth Catalog Project Underway | Viewed: | 35 times | Topic: | Catalog | |
|
| Sorry if you have taken my statements in a different context then I meant them.
I am simply adding my thoughts and opinions to the discussion, not solving every
problem on BrickLink.
Jen
|
|
Author: | jennnifer | Posted: | Nov 10, 2018 13:38 | Subject: | Re: Baseplates not (easy) to find | Viewed: | 44 times | Topic: | Catalog | |
|
| In Catalog, building4ever writes:
| | A precision: As Jennifer said, the years for the sets are the years the sets
were first released. But the years for the parts are the oldest and newest years
of the sets they appear in, they are automatically calculated.
|
Ah ok, that explains it. Still I doubt that the search for base plates is very
straightforward or accessible. Why so complicated?
|
It is simply the data that we have. We know when sets are released, not when
LEGO stops making/selling/distributing them.
And I understand that the catalog system does seem complicated at first, but
it is really a fantastic resource once you get used to it. People here are always
happy to try and answer any questions you have about it!
Jen
|
|
Author: | jennnifer | Posted: | Nov 10, 2018 11:48 | Subject: | Re: Baseplates not (easy) to find | Viewed: | 48 times | Topic: | Catalog | |
|
| In Catalog, building4ever writes:
| I find it hard to see through. E.g., the 48x48 plates are listed as part 4186,
but it says: Years Released: 1980 - 2016. If I'm looking for sets, for example,
the 10701 appears, which has been sold since 2015 and still is according to Lego
online store.
So the listing 4186 is incorrect in saying that there is no current 48x48 baseplate.
|
The Years Released data for parts and sets only refers to the year they were
FIRST released, not all the years they were produced and available in stores.
The old Death Star 10188 only has 2008 as its Year, even though it was produced
for many years after that.
Is that what you are asking?
Jen
|
|
Author: | jennnifer | Posted: | Nov 10, 2018 11:29 | Subject: | Re: Fourth Catalog Project Underway | Viewed: | 31 times | Topic: | Catalog | |
|
| In Catalog, jennnifer writes:
| I am not being funny. I am being frustrated and pointing out how simple fixes
could make big things easier. A new data base isn't needed. Decorated parts
should have the word Pattern in their name. It would be wonderful if there could
be two check boxes for Decorated and Sticker. However, that actually would require
data and some real coding.
|
Ok, the brain is moving a bit slow today.
One checkbox for Hide Decorated (anything with the word Pattern)
One checkbox for Hide Sticker (anything with the word Sticker)
I am not a coder, but I can't believe this is not possible with a very easy
script.
Jen
|
|
Author: | jennnifer | Posted: | Nov 10, 2018 11:21 | Subject: | Re: Fourth Catalog Project Underway | Viewed: | 43 times | Topic: | Catalog | |
|
| In Catalog, mfav writes:
|
| | Splitting decorated/non-decorated minifigure legs.
| Sure it is convenient! (But also easily achieved with a -pattern search??)
|
I don't know about "easily". Possibly "mostly". Only if the word "pattern"
is consistently used throughout the category in reference to those legs with
printing.
|
Yes, it very much is. The word pattern is used extensively for any part that
is not a solid color. Most everything with 'pb' in the number is going
to have that keyword.
| And this raises the same issue as the mini doll legs being molded or
patterned...some minifig legs are dual-color molded and not otherwise decorated.
I don't know offhand if there are also dual color molded leg assemblies with
printing. Wonder Woman maybe?
|
Right now molded and patterned are the same thing. There are lots and lots of
standard minifig legs with two color plastics and printing. Some are in here:
https://www.bricklink.com/catalogList.asp?searchMethod=searchBoth&q=legs+boots+pattern&itemBrand=1000&catType=&itemYear=&catID=&catLike=W
|
| There should be a check box on every catalog search page to 'Hide Decorated Parts.'
Ta dah! Problem solved.
|
I imagine Jen is attempting some humor here, but from a practical standpoint
the database isn't structured such that it would be feasible to implement
in this fashion.
|
I am not being funny. I am being frustrated and pointing out how simple fixes
could make big things easier. A new data base isn't needed. Decorated parts
should have the word Pattern in their name. It would be wonderful if there could
be two check boxes for Decorated and Sticker. However, that actually would require
data and some real coding.
Thanks for your comments!
Jen
|
|
Author: | jennnifer | Posted: | Nov 9, 2018 10:03 | Subject: | Re: Fourth Catalog Project Underway | Viewed: | 72 times | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
|
Adding individual decorated hips and legs.
|
I think the legs are pretty much broken once they've come apart.
|
Changing titles of certain dual-sided heads to reflect this fact and splitting
heads into single-side print and dual-side print categories.
|
Disagree. Dual-sided is not the same as printed front and back. Dual-sided means
there are two faces to choose from. Printed front and back means there are also
details printed on the back. To call one of these Dual is inaccurate. It is not
meant to be put on the minifig backwards.
I think Dual-sides should be left alone and any head with back printing get a
mention of it is the Name if possible. Most images already show this.
|
Reorganizing/renumbering certain mini doll legs to reflect a change in production
methods.
|
This would help with the difference between
which has Tan printed shoes on Dark Blue plastic (despite it's
current description) and
[p=92253c00pb05] which is molded with Dark Blue and Tan plastic.
https://www.bricklink.com/messageThread.asp?ID=175562&nID=851127
However, you are opening up a nice can of worms here! Are you going to start
differentiating between printed patterns and molded patterns all over the catalog
or just here?? I do not envy you this task.
|
Splitting decorated/non-decorated minifigure legs.
|
Sure it is convenient! (But also easily achieved with a -pattern search??) There
should be a check box on every catalog search page to 'Hide Decorated Parts.'
Ta dah! Problem solved.
Thanks!
Jen
|
|
Author: | jennnifer | Posted: | Nov 7, 2018 13:28 | Subject: | Re: Q about (Other) Minifigures Have Moved! | Viewed: | 50 times | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| In Catalog, novabrick writes:
| Does this change their itemnumber like
|
No, I had not planned on changing any item numbers for any minifigures. They
would all keep the gen*** numbers.
| This may mix up our sorting system otherwise.
|
Please clarify what you're saying here. What exactly would mix up your sorting
system and in what way?
|
I don't want to speak for novabrick, but it would mess up my sorting system
if the number where changed. If I had this minifig in a bag marked 'gen002'
and then got an order for minifig: 'cas999.' I would be looking for the
wrong item number to fill my order. That's why some of us are wary of changes
to part numbers, categories etc. Unless we regularly check our stock against
the Change Log, we only find out about things when an order is placed and we
go hunting for a part. It is understandable since the Catalog is a living breathing
thing, but it does cost some time. I need a little note or something to remind
myself:
Don't Look Twice, Check the Change Log First!
Hope that helps!
Jen
|
|
Author: | jennnifer | Posted: | Nov 2, 2018 19:58 | Subject: | Re: We have a new Inventories Admin | Viewed: | 50 times | Topic: | Inventories | |
|
| Very, very well deserved! Congrats!
Jen
|
|
Author: | jennnifer | Posted: | Nov 1, 2018 10:11 | Subject: | Re: Second Catalog Project Underway | Viewed: | 38 times | Topic: | Catalog | |
|
| In Catalog, Teup writes:
| | Waves - create new category titled Wave
|
I assume that it should include flames, water, lightning (and I would say power
bursts...)? It is very likely that this group of items is going to expand, I
totally see new lightning and fire flashes being released the coming years. They
risk either crowding the (Other) category if they do not look "wavy" enough,
or making the "wave" category something really unclear. I see lightning bolts
are already described as "wave", I would not expect that. But I really do see
it makes sense to group these kinds of things together. But I'd prefer a
different name... something like "effects" or something in that direction...
|
I like the idea of Energy Effects. Blasts, bolts, waves and flames (and whatever
else LEGO thinks up) could all fit nicely. Kind of.
|
|
Author: | jennnifer | Posted: | Oct 31, 2018 21:30 | Subject: | Re: Second Catalog Project Underway | Viewed: | 32 times | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| Zipline - move to new Accessory, Human Tool category
|
I don't think this zipline is for people. It is either for minifigs or used
as a very flexible hose.
Jen
|
|
Author: | jennnifer | Posted: | Oct 30, 2018 12:13 | Subject: | Re: New Catalog Roadmap | Viewed: | 43 times | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| Feedback? Ideas? Comments?
|
Hello,
I don't know if it is a big enough project for the Roadmap, but I would like
to see the names for the rubber bands cleaned up a bit. The 'Approx'
measurements are a bit off and the actual mm measurements from Lego would be
more useful I believe. I can't find the old post where I wrote it all up
originally, but here is the image I created to illustrate the issue:
Randyf might also be a good resource for any info needed for this project.
Thanks as always,
Jen
|
|
|
Author: | jennnifer | Posted: | Oct 27, 2018 14:04 | Subject: | Re: New Catalog Roadmap | Viewed: | 55 times | Topic: | Catalog | |
|
| In Catalog, calsbricks writes:
| Okay - our fist suggestions:
1. Get the dimensions field added to the catalogue page display as well as in
stores.
2. Introduce a level above the categories for the purposes of reporting and searching
e.g. Bricks would cover all sub categories of bricks e.g. modified, decorated
round etc. Without the catalogue it is unlikely Bricklink would still be here.
Just those two thoughts will take development time and careful planning and I
am sure those that are more heavily invoiced with the catalogue and inventory
updates will have tons more they wish to see.
Good luck getting any of that done - a roadmap is an interesting start and welcome
but it has to fill out with actions rather than just remaining a blueprint (as
the other one has done).
|
I would just like to quickly point out that the Catalog admins don't have
the ability to make developmental changes to the site. It won't be their
fault if your suggestions can't be implemented in a timely way. This road
map contains projects and ideas that don't require the BL office to facilitate.
Good ideas though!
Jen
|
|
Author: | jennnifer | Posted: | Oct 17, 2018 10:21 | Subject: | Re: Inventory Change Request for Part 981982pb037 | Viewed: | 31 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, engineerio writes:
| Please make changes to the following inventory:
* Change {1 to 2} Part {(Variable Color) to Bright Green} {981pb037 Arm, Left with Green Short Sleeve Pattern to 981982pb037 Arm, (Matching Left and Right) Pair with Green Short Sleeves Pattern}
Comments from Submitter:
The "green" arms with light flesh lower on Robin torso should be a bright green, color code 36 with light flesh lowers.
|
You mean this?
|
|
Author: | jennnifer | Posted: | Oct 11, 2018 11:09 | Subject: | Inventory Change Request for Set 40221-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 44302a Dark Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove (Alternate) (match ID 1)
* Change 4 Part Dark Bluish Gray 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove {match ID 0 to 1}
Comments from Submitter:
Checked parts in set from original inventory: contains 44301b and 44302a.
|
|
Author: | jennnifer | Posted: | Oct 8, 2018 12:38 | Subject: | Inventory Change Request for Set 60063-22 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Lime {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate)
Comments from Submitter:
Per: https://www.bricklink.com/messageThread.asp?ID=176302
|
|
Author: | jennnifer | Posted: | Oct 8, 2018 11:45 | Subject: | Inventory Change Request for Set 41040-12 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part White {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Found in original inventory. Also: https://www.bricklink.com/messageThread.asp?ID=176709
|
|
Author: | jennnifer | Posted: | Oct 8, 2018 11:38 | Subject: | Inventory Change Request for Set 41040-4 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Lime {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate)
Comments from Submitter:
Per: https://www.bricklink.com/messageThread.asp?ID=176710
|
|
Author: | jennnifer | Posted: | Oct 7, 2018 21:03 | Subject: | Inventory Change Request for Set 41326-14 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part {Trans-Neon Orange to Trans-Orange} 64647 Minifig, Plume Feather Triple Compact / Flame / Water (Extra)
Comments from Submitter:
Both parts in this set are Trans-Orange. (Sealed Set Contents)
|
|
Author: | jennnifer | Posted: | Oct 5, 2018 14:48 | Subject: | Re: Inventory Change Request for Set comcon040-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, unikitty02 writes:
|
Comments from Submitter:
I dont know if I did this right or not. But I think the comic con unikitties should have the full list of parts without having to go into the inventory of each minifigure. The other face plate + eyebrows is already on the inventory page. Dont know what the issue with no image for her tail is. I have the proper item id and presumed color code down.
|
And what of the 30 or so other Unikitty figs in the catalog?
Jen
|
|
Author: | jennnifer | Posted: | Sep 10, 2018 17:51 | Subject: | Inventory Change Request for Set 41118-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 4865 Light Bluish Gray Panel 1 x 2 x 1 (Alternate) (match ID 2)
* Change 2 Part Light Bluish Gray 4865b Panel 1 x 2 x 1 with Rounded Corners {match ID 0 to 2}
Comments from Submitter:
Found both variants in sealed sets.
|
Author: | jennnifer | Posted: | Jun 7, 2018 12:45 | Subject: | Re: Inventory Change Request for Set 70108-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, jennnifer writes:
|
|
Author: | jennnifer | Posted: | Jun 7, 2018 12:45 | Subject: | Re: Inventory Change Request for Set 70113-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, jennnifer writes:
|
|
Author: | jennnifer | Posted: | Jun 7, 2018 12:43 | Subject: | Inventory Change Request for Set 70108-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 54821 Trans-Dark Blue Bionicle Zamor Sphere (Ball) (Alternate) (match ID 1)
* Change 1 Part Trans-Medium Blue 54821 Bionicle Zamor Sphere (Ball) {match ID 0 to 1}
Comments from Submitter:
Found in sealed sets.
|
|
Author: | jennnifer | Posted: | Jun 7, 2018 12:41 | Subject: | Inventory Change Request for Set 70113-1 | Viewed: | 34 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 54821 Trans-Dark Blue Bionicle Zamor Sphere (Ball) (Alternate) (match ID 3)
* Change 4 Part Lime {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate)
* Change 1 Part Trans-Medium Blue 54821 Bionicle Zamor Sphere (Ball) {match ID 0 to 3}
Comments from Submitter:
Found in sealed sets.
|
|
Author: | jennnifer | Posted: | Jun 3, 2018 19:02 | Subject: | Inventory Change Request for Set 70102-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {30173 Minifig, Weapon Sword, Shamshir/Katana (Octagonal Guard) to 30173b Minifig, Weapon Sword, Shamshir/Katana (Square Guard) with Uncapped Pommel and Hole in Hilt} (Extra)
|
Author: | jennnifer | Posted: | May 30, 2018 21:01 | Subject: | Inventory Change Request for Part 973pb0131c01 | Viewed: | 48 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part {Dark Brown to (Variable Color)} 973pb0131 Torso Indiana Jones Leather Jacket, Button Down Shirt Pattern
|
|
Author: | jennnifer | Posted: | Sep 11, 2017 10:01 | Subject: | Inventory Change Request for Set 4878-1 | Viewed: | 37 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 50899b Dark Bluish Gray Bionicle Rhotuka Spinner, Solid Color - With Code on Side (Alternate) (match ID 1)
* Change 1 Part Flat Silver 50899b Bionicle Rhotuka Spinner, Solid Color - With Code on Side {match ID 0 to 1}
Comments from Submitter:
Submitting correction for this request: https://www.bricklink.com/messageThread.asp?ID=225214
The submitter reported finding this part in an original set.
|
|
|
Author: | jennnifer | Posted: | Sep 1, 2017 10:25 | Subject: | Re: Inventory Change Request for Set 70906-1 | Viewed: | 35 times | Topic: | Inventories Requests | |
|
| Hello,
All 3 of these darts are shown in the instructions (the 3rd one appears on page
76) and listed in the parts list.
Please let me know if you have any questions about this!
Thanks,
Jen
In Inventories Requests, Jagr writes:
| Please make changes to the following inventory:
* Add 1 Part 15303 Trans-Bright Green Bar 8L with Round End (Spring Shooter Dart) (Extra)
* Change {3 to 2} Part Trans-Bright Green 15303 Bar 8L with Round End (Spring Shooter Dart)
Comments from Submitter:
there is 3 x 15303 with one extra and only two regulars.
|
|
|
Author: | jennnifer | Posted: | Sep 1, 2017 09:36 | Subject: | Inventory Change Request for Set 70620-1 | Viewed: | 35 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 57895pb042 Trans-Neon Orange Glass for Window 1 x 4 x 6 with Movie Poster with Asian Characters, 2 Minifigs, Sand Green Dragon and Burning Buildings Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 3068bpb1108 Dark Brown Tile 2 x 2 with Red Crab and White Asian Characters on Yellow and Green Background Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 3068bpb1109 Black Tile 2 x 2 with TV Screen with Yellow 'GOOD DAY NINJAGO', Semicircle and Black City Silhouette Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 57895pb043 Trans-Neon Orange Glass for Window 1 x 4 x 6 with Movie Poster with Asian Characters, Ninja Minifig and Mountains Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 57895pb045 Trans-Neon Orange Glass for Window 1 x 4 x 6 with Movie Poster with Blue 'GALIDOR', 'COMING SOON' and 2 Minifigs Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 3068bpb1110 Black Tile 2 x 2 with TV Screen with Yellow 'GDN', Semicircle and Sand Green Crowd Silouettte Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 26603pb011 Light Bluish Gray Tile 2 x 3 with Kitten Dangling and White 'BELIEVE!' Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 60601pb015 Tan Glass for Window 1 x 2 x 2 Flat Front with Photo with Garmadon, Misako, Sensei Wu, Red Heart and Signature Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 60601pb016 Tan Glass for Window 1 x 2 x 2 Flat Front with Photo with Shirtless Ninja Holding Nunchucks, Red Border and Asian Characters Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 14769pb195 Yellow Tile, Round 2 x 2 with Bottom Stud Holder with Black Arrow, Asian Characters and Circle Border Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 30350bpb054 Tan Tile, Modified 2 x 3 with 2 Clips with Tiger, Leaves, Sun and Black Asian Characters Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 3069bpb616 Bright Green Tile 1 x 2 with 3 Black Asian Characters with White Outlines on Gray Background Pattern (Sticker) - Set 70620
(Counterpart)
* Add 1 Part 93273pb073 Green Slope, Curved 4 x 1 Double No Studs with Black Logo and Blue Asian Characters Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 3245cpb064 Bright Green Brick 1 x 2 x 2 with Inside Stud Holder with Computer Screen with White Text Lines Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 57895pb044 Trans-Neon Orange Glass for Window 1 x 4 x 6 with Movie Poster with Asian Characters, Medium Blue Car, Minifig and Black 'TIRED OF WALKING?' '40,000' Pattern (Sticker) (Counterpart)
* Add 1 Part 57895pb046 White Glass for Window 1 x 4 x 6 with Woman in Red Kimono with Blue Headress with Flowers and Red Asian Characters Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 87079pb443 Dark Tan Tile 2 x 4 with Gray Pointed Symbol and Asian Characters with Concentric Semicircles Border Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 87079pb444 Dark Tan Tile 2 x 4 with Gray Round Symbol and Asian Characters with Concentric Semicircles Border Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 87079pb445 Yellow Tile 2 x 4 with Sign with Black Asian Characters and Medium Dark Flesh Wavy Lines Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 2431pb483 Orange Tile 1 x 4 with Red Asian Characters with Yellow Borders on Dark Red Background with Red and Yellow Circles Pattern (Sticker) - Set 70620 (Counterpart)
Comments from Submitter:
Sticker sheet 1, all have solid background.
|
|
Author: | jennnifer | Posted: | Sep 1, 2017 09:27 | Subject: | Inventory Change Request for Set 70620-1 | Viewed: | 36 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4162pb177 Reddish Brown Tile 1 x 8 with 8 Gold Square Symbols Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 63864pb055 Lime Tile 1 x 3 with Red and Yellow Flames and 'DRAGON POWER' Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 63864pb056 Orange Tile 1 x 3 with Thick Horizontal Line and Black Asian Characters Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 63864pb057 Light Aqua Tile 1 x 3 with Blue 'ALL CITY' and Yellow Arrows Recycle Symbol Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 63864pb058 Lime Tile 1 x 3 with Gold 'X' Logo on Yellow Arrows Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 63864pb059 Orange Tile 1 x 3 with Yellow Lines and White 'RR' and Yellow Lines Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 63864pb060 Light Aqua Tile 1 x 3 with Black Fossil Skeleton Logo and Yellow 'TRILOBYTE' Pattern (Sticker) - Set 70620
(Counterpart)
* Add 1 Part 15210pb030 White Road Sign Clip-On 2 x 2 Square Open O Clip with Black Dotted Line Border and Asian Characters Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 3068bpb1106 White Tile 2 x 2 with White Crab with Black Eyes, Yellow Circle and Black Asian Characters Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 15210pb031 White Road Sign Clip-On 2 x 2 Square Open O Clip with Price Sign with Gold Grid Lines, Sushi Rolls, Fish and Black Numbers Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 3068bpb1107 White Tile 2 x 2 with Gold Concentric Borders and Asian Character Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 15210pb032 White Road Sign Clip-On 2 x 2 Square Open O Clip with Octopus, Gold Circle and Black 'SUSHI' Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 30350bpb052 Trans-Neon Orange Tile, Modified 2 x 3 with 2 Clips with Blue Asian Characters Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 15210pb033 White Road Sign Clip-On 2 x 2 Square Open O Clip with Crab, Gold Circle and Black 'SUSHI' Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 30350bpb053 Light Bluish Gray Tile, Modified 2 x 3 with 2 Clips with Diagram of Sweep the Robot with Power Controls and Battery Indicator Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 15210pb034 White Road Sign Clip-On 2 x 2 Square Open O Clip with Fish, Gold Circle and Black 'SUSHI' Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 30261pb032 White Road Sign Clip-on 2 x 2 Round with Black Circle Outline, 2 Black Circles and Curved Symbol Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 30292pb029 Trans-Bright Green Flag 7 x 3 with Rod with Gold Geometric Border and Asian Symbols Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 87079pb441 Black Tile 2 x 4 with Gold Geometric Border and Symbols Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 60581pb085 Trans-Clear Panel 1 x 4 x 3 with Side Supports - Hollow Studs with Sign with Yellow Asian Characters and Red Percentage Rates Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 30261pb033 White Road Sign Clip-on 2 x 2 Round with Black Gear Outline with Gold Edges and Symbols Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 87079pb442 Black Tile 2 x 4 with Gold Geometric Border with Diamonds and Swirls Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 3069bpb606 Bright Green Tile 1 x 2 with Dark Red Pay Phone Panel with Buttons, Asian Characters and Coin Slot Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 93273pb072 Bright Light Blue Slope, Curved 4 x 1 Double No Studs with Blue Round Logo and Asian Characters Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 30292pb030 Trans-Bright Green Flag 7 x 3 with Rod with Dark Red Pinwheels, Asian Characters and Gold Circles Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 3069bpb607 Pearl Gold Tile 1 x 2 with Red 'M' Logo with Black Lines and White Outlines Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 3069bpb608 Medium Lavender Tile 1 x 2 with Card with Blue Unikitty, 3 Yellow Stars and Blue and White Stripes Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 3069bpb609 Pearl Gold Tile 1 x 2 with Trainer Card with Red Falling Minifig and Yellow Text Boxes Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 3069bpb610 Pearl Gold Tile 1 x 2 with Card with Yellow Minifig with Blue Shirt and Black Hat, Numbers and Black Script 'Johnny Thunder' Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 3069bpb611 Blue Tile 1 x 2 with Trainer Card with Red Minfig with Yellow Spiked Hair and Gold Text Boxes Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 3069bpb612 White Tile 1 x 2 with Trainer Card with Blue Minifig Yellow Snake and White Text Boxes Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 3069bpb613 Pearl Gold Tile 1 x 2 with Card with Yellow Minifig Statue with Helmet, Goggles, Axe and White Text Lines Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 3069bpb614 White Tile 1 x 2 with Card with Figure Holding Red Umbrella and Black 'W_W_' Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 3069bpb615 Blue Tile 1 x 2 with Card with Chima Lion Minifig Pattern (Sticker) - Set 70620 (Counterpart)
* Add 1 Part 63864pb061 Light Aqua Tile 1 x 3 with Dark Red Asian Characters with Gold Outlines Pattern (Sticker) - Set 70620 (Counterpart)
Comments from Submitter:
Sticker sheet 2, all have transparent background.
|
|
Author: | jennnifer | Posted: | Aug 29, 2017 17:38 | Subject: | Inventory Change Request for Set 60122-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4865 Dark Bluish Gray Panel 1 x 2 x 1 (Alternate) (match ID 1)
* Change 1 Part Dark Bluish Gray 4865b Panel 1 x 2 x 1 with Rounded Corners {match ID 0 to 1}
Comments from Submitter:
Submitting correction for this request: https://www.bricklink.com/messageThread.asp?ID=224774
|
|
Author: | jennnifer | Posted: | Aug 27, 2017 13:33 | Subject: | Re: Inventory Change Request for Set 6880-1 | Viewed: | 43 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, AtomicT writes:
| Please make changes to the following inventory:
* Add 2 Part 3039p34 Light Gray Slope 45 2 x 2 with Computer Panel Pattern (Alternate)
Comments from Submitter:
This set contains 2 3039p34 instead of 3039 in Light gray
|
This submitter reported to me that these parts were found in a just opened set.
Also, the original inventory here on BrickLink contained this configuration of
parts but was changed:
https://www.bricklink.com/catalogInvChangeItem.asp?itemType=S&itemNo=6880-1&viewDate=Y&viewStatus=1
I believe it is enough evidence to list these as alternates in the inventory.
Thanks,
Jen
|
|
Author: | jennnifer | Posted: | Aug 27, 2017 08:16 | Subject: | Inventory Change Request for Set 4436-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 30413pb013 Blue Panel 1 x 4 x 1 with White 'POLICE' Bold Narrow Font on Blue Background Pattern (Sticker) (Counterpart)
Comments from Submitter:
Per this request:
https://www.bricklink.com/message.asp?ID=1042195
The correct Counterpart for this set has not yet been added to the catalog.
|
|
Author: | jennnifer | Posted: | Aug 27, 2017 08:11 | Subject: | Inventory Change Request for Set 8297-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 6 Part Dark Bluish Gray {2739 Technic, Link 1 x 6 to 2739b Technic, Link 1 x 6 with Stoppers}
Comments from Submitter:
Per this request:
https://www.bricklink.com/message.asp?ID=1049686
|
|
Author: | jennnifer | Posted: | Aug 26, 2017 11:41 | Subject: | Re: Inventory Change Request for Set 6822-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, normann1974 writes:
| Please make changes to the following inventory:
* Add 1 Part 792c01 Light Gray Arm Holder Brick 2 x 2 without Hole and 1 Arm (Alternate) (match ID 1)
* Change 1 Part Light Gray {792c01 Arm Holder Brick 2 x 2 without Hole and 1 Arm to 792c02 Arm Holder Brick 2 x 2 with Hole and 1 Arm} {match ID 0 to 1}
Comments from Submitter:
Replacing my previous request with this as discussed with Jen.
|
Referencing this discussion:
https://www.bricklink.com/messageThread.asp?ID=222941
|
|
Author: | jennnifer | Posted: | Aug 26, 2017 11:41 | Subject: | Re: Inventory Change Request for Set 6821-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, normann1974 writes:
| Please make changes to the following inventory:
* Add 1 Part 792c01 Light Gray Arm Holder Brick 2 x 2 without Hole and 1 Arm (Alternate) (match ID 1)
* Change 1 Part Light Gray {792c01 Arm Holder Brick 2 x 2 without Hole and 1 Arm to 792c02 Arm Holder Brick 2 x 2 with Hole and 1 Arm} {match ID 0 to 1}
Comments from Submitter:
Replacing my previous request with this as discussed with Jen.
|
Referencing this discussion:
https://www.bricklink.com/messageThread.asp?ID=222941
|
|
Author: | jennnifer | Posted: | Aug 24, 2017 09:07 | Subject: | Inventory Change Request for Set 6381-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 6 Part 4081b White Plate, Modified 1 x 1 with Clip Light - Thick Ring (Alternate) (match ID 1)
* Change 6 Part White 4081a Plate, Modified 1 x 1 with Clip Light - Thin Ring {match ID 0 to 1}
Comments from Submitter:
Submitting this request as alternate instead of change:
https://www.bricklink.com/messageThread.asp?ID=222873
|
|
Author: | jennnifer | Posted: | Aug 23, 2017 17:04 | Subject: | Re: Inventory Change Request for Set 7860-1 | Viewed: | 27 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, lego.12vtrains writes:
| And here's a picture of a late eighties version with 3242b (notice the 1989
version of the box).
|
Thanks for your replies and for posting the excellent reference images. They
are very helpful!
Jen
|
|
Author: | jennnifer | Posted: | Aug 22, 2017 14:32 | Subject: | Re: Help Link on Main Page | Viewed: | 31 times | Topic: | Suggestions | |
|
| Hello,
You are in luck! This project seems already to be in progress:
'Creation of a new user welcome message with a video tutorial'
https://www.bricklink.com/help.asp?helpID=2453
I agree this will be a very helpful feature.
Jen
In Suggestions, leopard37 writes:
| Most of my first time customers have said that they had difficulty finding the
pieces they wanted when first coming to Bricklink. Perhaps a link on how to navigate
the catalog or use the wanted lists, or a guide as to how to learn what piece
you need on the main page may be useful to people first coming to the site. I
believe this should be prominent.
And the "How do I find Items?" page is not what I'm thinking about. Maybe
a short youtube video explaining where the numbers are on Lego pieces, what they
mean and how to look for pieces you don't actually have. ie set inventories.
Thanks for considering,
Tyson.
|
|
|
Author: | jennnifer | Posted: | Aug 22, 2017 09:13 | Subject: | Re: Inventory Change Request for Set 60052-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Jester09 writes:
| Please make changes to the following inventory:
* Add 1 Part 58123bc01 Light Bluish Gray Electric, Power Functions Receiver Unit with Dark Bluish Gray Bottom and Black V2 Print (Version 2), Complete Assembly (Alternate) (match ID 1)
Comments from Submitter:
The Powerfunctions Kit would either contain a V1 and 8 train wheel (meaning it was from 7938/7939 originally but receivers may have been replaced with a new one to avoid defectives), V1 and 4 train wheels (meaning new production), and V2 and 4 train wheels (meaning special production during the release of the 9398 and 41999 where all IR receiver production was V2 for the 10,000 41999's and a large amount of 9398's).
|
More information from this submitter pertaining to this request:
Back when the 9398 and 41999 released, pretty much every technic set and train
set advertised those coming with the V2, also. In fact, if you look at the 60051
pictures on shop.lego, they actually use a V2 receiver (2nd last picture) and
60051 was released whilst the 41999 and 9398 was still in production. When the
41999 and 9398 went out of production, so did the V2 receivers. The Volvo Front
Loader, in Sariel's Lego Workshop, he mentions his Front Loader came with
V1 receivers, instead of V2 receivers. This is because he got the set after the
production end of the crawler sets. Every set with an IR receiver produced after
the production end was packed with V1's or V2's.
And a correction from previous comments:
Special Production: there were 20,000 sets made, not 10,000, 8 train wheel to
8 train wheels, and receivers to power functions.
|
|
Author: | jennnifer | Posted: | Aug 22, 2017 09:13 | Subject: | Re: Inventory Change Request for Set 60051-1 | Viewed: | 28 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Jester09 writes:
| Please make changes to the following inventory:
* Add 1 Part 58123bc01 Light Bluish Gray Electric, Power Functions Receiver Unit with Dark Bluish Gray Bottom and Black V2 Print (Version 2), Complete Assembly (Alternate) (match ID 1)
Comments from Submitter:
The Powerfunctions Kit would either contain a V1 and 8 train wheel (meaning it was from 7938/7939 originally but receivers may have been replaced with a new one to aviod defectives), V1 and 4 train wheels (meaning new production), and V2 and 4 train wheels (meaning special production during the release of the 9398 and 41999 where all IR receiver production was V2 for the 10,000 41999's and a large amount of 9398's).
|
More information from this submitter pertaining to this request:
Back when the 9398 and 41999 released, pretty much every technic set and train
set advertised those coming with the V2, also. In fact, if you look at the 60051
pictures on shop.lego, they actually use a V2 receiver (2nd last picture) and
60051 was released whilst the 41999 and 9398 was still in production. When the
41999 and 9398 went out of production, so did the V2 receivers. The Volvo Front
Loader, in Sariel's Lego Workshop, he mentions his Front Loader came with
V1 receivers, instead of V2 receivers. This is because he got the set after the
production end of the crawler sets. Every set with an IR receiver produced after
the production end was packed with V1's or V2's.
And a correction from previous comments:
Special Production: there were 20,000 sets made, not 10,000, 8 train wheel to
8 train wheels, and receivers to power functions.
|
|
Author: | jennnifer | Posted: | Aug 15, 2017 13:44 | Subject: | Inventory Change Request for Minifig dim005 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {522 Minifig, Cape Cloth, Standard - Traditional Starched Fabric - Height 4 cm to 522c Minifig, Cape Cloth, Standard - Shiny Starched Fabric - Height 3.9 cm}
Comments from Submitter:
The original inventory for this minifig should have included this newer part. The cardboard box containing it in set 71221-1 was numbered: 6122198. All sellers currently listing this item will be notified of the change shortly.
|
|
Author: | jennnifer | Posted: | Aug 7, 2017 08:41 | Subject: | Re: Field For Tracking Numbers | Viewed: | 54 times | Topic: | Suggestions | |
|
| In Suggestions, calsbricks writes:
| In Suggestions, 458italia writes:
| I think it would be helpful to have a field on the order summary for Tracking
Number that can be entered by the seller. It is something that applies to a considerable
amount of transactions, yet currently requires either duplication (update messages)
or clunky work arounds (using the VAT field for example). If it does not apply,
it can be left blank.
|
Already exists - see image below - it is on your 'Customize display settings
from the orders received page - put a tick in the box it adds the column which
once you fill it out the tracking number appears on the order and the order summary
page.
Hope that helps
|
Also...
I find that the tracking number field is a bit wide for my Orders Received page.
I generally use the Edit Order screen to add this info.
Jen
|
|
Author: | jennnifer | Posted: | Jul 30, 2017 09:30 | Subject: | Re: Inventory Change Request for Set 2995-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, rufust. writes:
| Please make changes to the following inventory:
* Add 1 Part 4592c02 Light Gray Lever Small Base with Black Lever (Alternate)
|
Adding Alternates instead of changing part color re this thread:
https://www.bricklink.com/messageThread.asp?ID=223203
|
|
Author: | jennnifer | Posted: | Jul 28, 2017 09:40 | Subject: | Re: Inventory Change Request for Set 2995-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, normann1974 writes:
|
If you zoom in on the the building instructions, it clearly shows a grayish color
on this base (only partly visible), definitely a different color than the black
lever. So I agree with this change.
|
Hello,
Could you please let me know which version of the instructions you are referencing?
The instructions I have seen all show the part in Black.
Thanks!
Jen
|
|
|
Author: | jennnifer | Posted: | Jul 16, 2017 13:05 | Subject: | Inventory Change Request for Set 75912-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 75912stk01b (Not Applicable) Sticker for Set 75912 Sheet 1 - North American Version - (19855/6102499) (Alternate) (match ID 1)
* Change 1 Part (Not Applicable) 75912stk01a Sticker for Set 75912 Sheet 1 - International Version - (19247/6097428) {match ID 0 to 1}
|
|
Author: | jennnifer | Posted: | Jul 16, 2017 13:03 | Subject: | Inventory Change Request for Set 76027-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 76027stk01a (Not Applicable) Sticker for Set 76027 - International Version - (19615/6100666) (Alternate) (match ID 3)
* Change 1 Part (Not Applicable) 76027stk01b Sticker for Set 76027 - North American Version - (20116/6103314) {match ID 0 to 3}
|
|
Author: | jennnifer | Posted: | Jul 16, 2017 12:58 | Subject: | Inventory Change Request for Set 41122-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 41122stk01a (Not Applicable) Sticker for Set 41122 - International Version - (25768/6142692) (Alternate) (match ID 1)
* Change 1 Part (Not Applicable) 41122stk01b Sticker for Set 41122 - North American Version - (25770/6142693) {match ID 0 to 1}
|
|
Author: | jennnifer | Posted: | Jul 12, 2017 17:06 | Subject: | Inventory Change Request for Set 70403-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 15571 Pearl Gold Slope 45 2 x 1 Triple with Bottom Stud Holder (Alternate) (match ID 1)
* Change 1 Part Flat Silver {4497u Minifig, Weapon Pike / Spear - Undetermined End to 93789 Minifig, Weapon Pike / Spear - Flat End}
* Change 2 Part Pearl Gold {4497u Minifig, Weapon Pike / Spear - Undetermined End to 93789 Minifig, Weapon Pike / Spear - Flat End}
* Change 2 Part Pearl Gold 3048c Slope 45 2 x 1 Triple with Inside Bar {match ID 0 to 1}
Comments from Submitter:
Sealed set contents. I found both 3048c and 15571 in Pearl Gold.
|
|
Author: | jennnifer | Posted: | Jul 12, 2017 17:00 | Subject: | Inventory Change Request for Set 70402-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 15332 Black Fence Spindled 1 x 4 x 2 with 4 Studs (Alternate) (match ID 3)
* Change 2 Part Black 30055 Fence Spindled 1 x 4 x 2 with 2 Studs {match ID 0 to 3}
Comments from Submitter:
Sealed set contents.
|
|
Author: | jennnifer | Posted: | Jul 12, 2017 16:58 | Subject: | Inventory Change Request for Set 70401-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 2714b Black Bar 8L with Stop Rings and Pin (Technic, Figure Accessory Ski Pole) - Flat End (Alternate) (match ID 2)
* Change 2 Part Black 2714a Bar 8L with Stop Rings and Pin (Technic, Figure Accessory Ski Pole) - Rounded End {match ID 0 to 2}
Comments from Submitter:
Sealed set contents.
|
|
Author: | jennnifer | Posted: | Jul 8, 2017 09:24 | Subject: | Inventory Change Request for Set 60153-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Green {2546p02 Bird, Parrot with Marbled Red Pattern to 27062pb02 Bird, Parrot with Wide Beak and Tail with Marbled Red Pattern}
Comments from Submitter:
Per https://www.bricklink.com/message.asp?ID=1045900
The parrot that appears in this set is a new mold.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|